Re: How to define couple links using HCD
Have you read the two manuals Server Time Protocol Planning Guide and Server Time Protocol Implementation Guide? Are you running a Parallel Sysplex and need the CF lpars? You may have wasted money as you can define TIMER ONLY links. I haven't looked at the books for some time however they should cover everything you need to implement STP. Alan -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of ibmnew Sent: Friday, April 09, 2010 20:54 To: IBM-MAIN@bama.ua.edu Subject: How to define couple links using HCD Hi all We want to replace out sysplex time with STP. We purchased two CFs(Z10) and installed two couple links with ICB-4 between the CFs. Could you help us to define the couple links using HCD for it. Thanks a lot! Best Regards, Jason Cai -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: How to define couple links using HCD
If you are new to peer mode this is a good white paper on the subject http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/WP100265. Though there appears to be a newer one which I have not read-WP100820. Otherwise to strictly answer your question on how to define the links the HCD piece is fairly automatic. Define your TYPE=CFP CHPIDs on the respective processors. Select one of the CHPIDs with F then P. Specify the destination CHPID information then accept or change the suggested control units and devices. Repeat for redundant links. Regards, Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of ibmnew Sent: Friday, April 09, 2010 6:54 PM To: IBM-MAIN@bama.ua.edu Subject: How to define couple links using HCD Hi all We want to replace out sysplex time with STP. We purchased two CFs(Z10) and installed two couple links with ICB-4 between the CFs. Could you help us to define the couple links using HCD for it. Thanks a lot! Best Regards, Jason Cai -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
How to define couple links using HCD
Hi all We want to replace out sysplex time with STP. We purchased two CFs(Z10) and installed two couple links with ICB-4 between the CFs. Could you help us to define the couple links using HCD for it. Thanks a lot! Best Regards, Jason Cai -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
