Re: NetView Startup problem
Hello, Problem got resolved. It was a problem with the Catalog. Non of my NETVIEEW dataset were catalogged. So I created alias in NETVIEw catalog. And then modified my PROG member for APF. Now NETVIEW screen is working. Thanks Regards Saurabh On Wed, Nov 23, 2011 at 3:35 PM, saurabh khandelwal sourabhkhandelwal...@gmail.com wrote: Hello, I am trying to bring up Netveiw address spaces. but I proc is abended with 0C4. I tried isolating using help of google but it didnt helped me much. 1) S NETVSSI STMT NO. MESSAGE 2 IEFC001I PROCEDURE NETVSSI WAS EXPANDED USING SYSTEM LIBRARY TIVOLI.PROCLIB IEF695I START NETVSSI WITH JOBNAME NETVSSI IS ASSIGNED TO USER SYSSTC , GROUP SYSPROC IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED IEA995I SYMPTOM DUMP OUTPUT SYSTEM COMPLETION CODE=0C4 REASON CODE=0011 TIME=07.51.49 SEQ=00072 CPU= ASID=0066 PSW AT TIME OF ERROR 078D1000 8746 ILC 4 INTC 11 ACTIVE LOAD MODULE ADDRESS=78D8 OFFSET=0E6E NAME=CNMINIT DATA AT PSW 8740 - 001058E0 908C5810 E1DC5910 2) S NETVIEW 07.52.36 STC00667 FRIDAY,20 DEC 2013 07.52.36 STC00667 IEF695I START NETVIEW WITH JOBNAME NETVIEW IS ASSIGNED TO USER SYSSTC , GROUP SYSPROC 07.52.36 STC00667 $HASP373 NETVIEW STARTED 07.52.36 STC00667 IEF403I NETVIEW - STARTED - TIME=07.52.36 07.52.37 STC00667 - --TIMINGS (MINS.)--PAGING COUNTS--- 07.52.37 STC00667 -JOBNAME STEPNAME PROCSTEPRC EXCPCPU SRB CLOCK SERV PG PAGE SWAPVIO SWAPS STEPNO 07.52.37 STC00667 -NETVIEW STEP1 00652.00 .00.02 1633 0 0 0 0 0 1 07.52.37 STC00667 CSV003I REQUESTED MODULE CNMPPNOT FOUND 07.52.37 STC00667 CSV028I ABEND806-04 JOBNAME=NETVIEW STEPNAME=NETVIEW 07.52.37 STC00667 IEA995I SYMPTOM DUMP OUTPUT 378 378 SYSTEM COMPLETION CODE=806 REASON CODE=0004 378 TIME=07.52.37 SEQ=00074 CPU= ASID=0066 378 PSW AT TIME OF ERROR 070C1000 8128BBD0 ILC 2 INTC 0D 378NO ACTIVE MODULE FOUND 378NAME=UNKNOWN Please help me to resolve this issue Regards Saurabh -- Thanks Regards Saurabh Khandelwal -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
PGM=CNMINIT,TIME=1440,REGION=6144K,PARM=(8192,2048,'%','SYSTEM','PPI','*NOARM'), DPRTY=(13,13) Two things: 1. Why such a small region? IBM has recommended REGION=0M for aeons. This could be a cause of the 0C4. 2. Specifying DPRTY is so 1980. - Ted MacNEIL eamacn...@yahoo.ca Twitter: @TedMacNEIL -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
Thanks for your help. I changed region parameter. But System is not allowing me to change DPRTY to 1980. So I left it as old one. (13,13). but still same error. STMT NO. MESSAGE 2 IEFC001I PROCEDURE NETVSSI WAS EXPANDED USING SYSTEM LIBRARY TIVOLI.PR IEF695I START NETVSSI WITH JOBNAME NETVSSI IS ASSIGNED TO USER SYSSTC , GROUP IEA995I SYMPTOM DUMP OUTPUT SYSTEM COMPLETION CODE=0C4 REASON CODE=0011 TIME=09.33.22 SEQ=00099 CPU= ASID=0051 PSW AT TIME OF ERROR 078D1000 8746 ILC 4 INTC 11 ACTIVE LOAD MODULE ADDRESS=78D8 OFFSET=0E6E NAME=CNMINIT DATA AT PSW 8740 - 001058E0 908C5810 E1DC5910 Regards Saurabh On Thu, Nov 24, 2011 at 3:15 PM, Ted MacNEIL eamacn...@yahoo.ca wrote: PGM=CNMINIT,TIME=1440,REGION=6144K,PARM=(8192,2048,'%','SYSTEM','PPI','*NOARM'), DPRTY=(13,13) Two things: 1. Why such a small region? IBM has recommended REGION=0M for aeons. This could be a cause of the 0C4. 2. Specifying DPRTY is so 1980. - Ted MacNEIL eamacn...@yahoo.ca Twitter: @TedMacNEIL -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- Thanks Regards Saurabh Khandelwal -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
Hi Saurabh, I haven't followed this one much so I hope I am not repeating earlier advice, but ACNMLINK certainly won't work - you need your target library for sure (lowest level qualifier CNMLINK - I can't remember the prefixes, but it might be TLIB.NV390.V5R3.CNMLINK for you) and it must be authorised. (note that CNMINIT in ACNMLINK is not AC=01, but in CNMLINK it is). You also need a NETV subsystem set up in your IEFSSNxx member - SUBSYS SUBNAME(NETV). Best regards, David Tidy IS Technical Management/SAP-Mf Dow Benelux B.V. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of saurabh khandelwal Sent: 24 November 2011 07:40 To: IBM-MAIN@bama.ua.edu Subject: Re: NetView Startup problem Hello, I added my STEPLIB libraries to ROG00 and IPL'd system again. but still getting same error .. I have added DLIB.NV390.V5R3.ACNMLINK dataset on my PROG member. RC S0C4 and resason code 11 for below step. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
From: saurabh khandelwal sourabhkhandelwal...@gmail.com I changed region parameter. But System is not allowing me to change DPRTY to 1980. So I left it as old one. (13,13). but still same error. which release of NetView do you have ? Walter Marguccio z/OS Systems Programmer BELENUS LOB Informatic GmbH Munich - Germany -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
My fault. I meant it was out of date. My suggestion is to remove it, since it's only checked for syntax, now. - Ted MacNEIL eamacn...@yahoo.ca Twitter: @TedMacNEIL -Original Message- From: saurabh khandelwal sourabhkhandelwal...@gmail.com Sender: IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu Date: Thu, 24 Nov 2011 15:35:59 To: IBM-MAIN@bama.ua.edu Reply-To: IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu Subject: Re: NetView Startup problem Thanks for your help. I changed region parameter. But System is not allowing me to change DPRTY to 1980. So I left it as old one. (13,13). but still same error. STMT NO. MESSAGE 2 IEFC001I PROCEDURE NETVSSI WAS EXPANDED USING SYSTEM LIBRARY TIVOLI.PR IEF695I START NETVSSI WITH JOBNAME NETVSSI IS ASSIGNED TO USER SYSSTC , GROUP IEA995I SYMPTOM DUMP OUTPUT SYSTEM COMPLETION CODE=0C4 REASON CODE=0011 TIME=09.33.22 SEQ=00099 CPU= ASID=0051 PSW AT TIME OF ERROR 078D1000 8746 ILC 4 INTC 11 ACTIVE LOAD MODULE ADDRESS=78D8 OFFSET=0E6E NAME=CNMINIT DATA AT PSW 8740 - 001058E0 908C5810 E1DC5910 Regards Saurabh On Thu, Nov 24, 2011 at 3:15 PM, Ted MacNEIL eamacn...@yahoo.ca wrote: PGM=CNMINIT,TIME=1440,REGION=6144K,PARM=(8192,2048,'%','SYSTEM','PPI','*NOARM'), DPRTY=(13,13) Two things: 1. Why such a small region? IBM has recommended REGION=0M for aeons. This could be a cause of the 0C4. 2. Specifying DPRTY is so 1980. - Ted MacNEIL eamacn...@yahoo.ca Twitter: @TedMacNEIL -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- Thanks Regards Saurabh Khandelwal -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
Hello, I have subsystem entry in my IEFSSN00 member. SUBSYS SUBNAME(NETV) Also I dont have CNMLINK. I just have ACNMLINK in below dataset, and CNMINIT member exist in this. DLIB.NV390.V5R3.ACNMLINK(CNMINIT) Thanks Regards SAurabh On Thu, Nov 24, 2011 at 4:54 PM, Tidy, David (D) dt...@dow.com wrote: Hi Saurabh, I haven't followed this one much so I hope I am not repeating earlier advice, but ACNMLINK certainly won't work - you need your target library for sure (lowest level qualifier CNMLINK - I can't remember the prefixes, but it might be TLIB.NV390.V5R3.CNMLINK for you) and it must be authorised. (note that CNMINIT in ACNMLINK is not AC=01, but in CNMLINK it is). You also need a NETV subsystem set up in your IEFSSNxx member - SUBSYS SUBNAME(NETV). Best regards, David Tidy IS Technical Management/SAP-Mf Dow Benelux B.V. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of saurabh khandelwal Sent: 24 November 2011 07:40 To: IBM-MAIN@bama.ua.edu Subject: Re: NetView Startup problem Hello, I added my STEPLIB libraries to ROG00 and IPL'd system again. but still getting same error .. I have added DLIB.NV390.V5R3.ACNMLINK dataset on my PROG member. RC S0C4 and resason code 11 for below step. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- Thanks Regards Saurabh Khandelwal -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
NetVIEW V5R3 Regards Saurabh On Thu, Nov 24, 2011 at 4:23 PM, Walter Marguccio walter_marguc...@yahoo.com wrote: From: saurabh khandelwal sourabhkhandelwal...@gmail.com I changed region parameter. But System is not allowing me to change DPRTY to 1980. So I left it as old one. (13,13). but still same error. which release of NetView do you have ? Walter Marguccio z/OS Systems Programmer BELENUS LOB Informatic GmbH Munich - Germany -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- Thanks Regards Saurabh Khandelwal -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
My earlier reply was based on the Netview 5.3 mentioned in the dataset name (the SSN statement changes in version 6). Best regards, David Tidy IS Technical Management/SAP-Mf Dow Benelux B.V. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Walter Marguccio Sent: 24 November 2011 11:54 To: IBM-MAIN@bama.ua.edu Subject: Re: NetView Startup problem From: saurabh khandelwal sourabhkhandelwal...@gmail.com I changed region parameter. But System is not allowing me to change DPRTY to 1980. So I left it as old one. (13,13). but still same error. which release of NetView do you have ? Walter Marguccio z/OS Systems Programmer BELENUS LOB Informatic GmbH Munich - Germany -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
Hello, I have subsystem entry in my IEFSSN00 member. SUBSYS SUBNAME(NETV) Also I dont have CNMLINK. I just have ACNMLINK in below dataset, and CNMINIT member exist in this. DLIB.NV390.V5R3.ACNMLINK(CNMINIT) Thanks Regards SAurabh Saurabh, You may wish to review this document on starting up NETVIEW http://publib.boulder.ibm.com/tividd/td/netview390/dqll2mst/en_US/HTML/dqll2 m02.htm#ToC http://publib.boulder.ibm.com/tividd/td/netview390/dqll2mst/en_US/HTML/dqll2 m12.htm It does a good job of explaining the steps and results Lizette -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
Hi Saurabh, I'm sorry , but you must/should have a CNMLINK dataset. Often it will be on your sysres pack. It might even be SYS1.CNMLINK. If on option 3.4 in ISPF, you use **.CNMLINK for the dataset level, you should eventually see what your one is called (it might take some time to give you the list). Best regards, David Tidy Tel:(31)115-67-1745 IS Technical Management/SAP-Mf Fax:(31)115-67-1762 Dow Benelux B.V.Mailto:dt...@dow.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of saurabh khandelwal Sent: 24 November 2011 12:41 To: IBM-MAIN@bama.ua.edu Subject: Re: NetView Startup problem Hello, I have subsystem entry in my IEFSSN00 member. SUBSYS SUBNAME(NETV) Also I dont have CNMLINK. I just have ACNMLINK in below dataset, and CNMINIT member exist in this. DLIB.NV390.V5R3.ACNMLINK(CNMINIT) Thanks Regards SAurabh On Thu, Nov 24, 2011 at 4:54 PM, Tidy, David (D) dt...@dow.com wrote: Hi Saurabh, I haven't followed this one much so I hope I am not repeating earlier advice, but ACNMLINK certainly won't work - you need your target library for sure (lowest level qualifier CNMLINK - I can't remember the prefixes, but it might be TLIB.NV390.V5R3.CNMLINK for you) and it must be authorised. (note that CNMINIT in ACNMLINK is not AC=01, but in CNMLINK it is). You also need a NETV subsystem set up in your IEFSSNxx member - SUBSYS SUBNAME(NETV). Best regards, David Tidy IS Technical Management/SAP-Mf Dow Benelux B.V. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of saurabh khandelwal Sent: 24 November 2011 07:40 To: IBM-MAIN@bama.ua.edu Subject: Re: NetView Startup problem Hello, I added my STEPLIB libraries to ROG00 and IPL'd system again. but still getting same error .. I have added DLIB.NV390.V5R3.ACNMLINK dataset on my PROG member. RC S0C4 and resason code 11 for below step. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- Thanks Regards Saurabh Khandelwal -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
On Thu, 24 Nov 2011 12:09:48 +0530, saurabh khandelwal sourabhkhandelwal...@gmail.com wrote: Hello, I added my STEPLIB libraries to ROG00 and IPL'd system again. but still getting same error .. I have added DLIB.NV390.V5R3.ACNMLINK dataset on my PROG member. RC S0C4 and resason code 11 for below step. The above looks like your distribution libraries. You should be using the libraries created after accept and apply. Seb -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
Have you followed the Installation process. From the V5R3 manual Tivoli NetView for z/OS, Version 5.3 (Revised September 2008) Member PROGxx contains the names of program libraries that you want the system to concatenate to SYS1.LINKLIB and libraries that you want to define as authorized with the Authorized Program Facility (APF). Use PROGxx instead of using both LNKLSTxx (to concatenate program libraries to SYS1.LINKLIB) and IEAAPFxx (to authorize program libraries to APF). If you are using the LNKLST concatenation instead of a STEPLIB DD statement in your NetViewR startup procedure, update your PROGxx member in the SYS1.PARMLIB data set to include the following program libraries as extensions to the SYS1.LINKLIB data set: * NETVIEW.V5R3M0.CNMLINK * NETVIEW.V5R3M0.SCNMLNKN The SCNMLNKN data set is used for RODM trace, MVST command exit, and DSIPHONE. It is not referenced in the NetView program samples. The following libraries must be authorized with the Authorized Program Facility (APF). To be authorized, a library's name and volume ID must be in the list of authorized libraries in the PROGxx member of SYS1.PARMLIB. 1. If these are not already authorized, authorize all the libraries from the //STEPLIB, //VTAMLIB, and //NCPLOAD concatenations in your VTAMR start procedure. The VTAM start procedure, CNMSJ008 (CNMNET), in NETVIEW.V5R3M0.CNMSAMP is the default member shipped with the NetView program. 2. Authorize all the libraries from the //STEPLIB concatenation in the following procedures: * The NetView start procedure, CNMSJ009 (CNMPROC), in NETVIEW.V5R3M0.CNMSAMP * The NetView procedure to start the subsystem interface (SSI) address space, CNMSJ010 (CNMPSSI), in NETVIEW.V5R3M0.CNMSAMP * The RODM start procedure, EKGXRODM, in NETVIEW.V5R3M0.CNMSAMP * The GMFHS start procedure, CNMSJH10 (CNMGMFHS), in NETVIEW.V5R3M0.CNMSAMP * The Event/Automation Service (E/AS) start procedure, IHSAEVNT, in NETVIEW.V5R3M0.SCNMUXMS 3. Authorize the following NetView libraries: * NETVIEW.V5R3M0.SCNMLNK1 * NETVIEW.V5R3M0.SCNMLPA1 * NETVIEW.V5R3M0.CNMLINK * NETVIEW.V5R3M0.SCNMLNKN * NETVIEW.V5R3M0.SCNMUXLK (if you are using E/AS services) 4. If you are installing the NetView V5R3 Japanese program, authorize the SCNMMJPN data set. This data set is listed in the //STEPLIB concatenation of CNMPROC. 5. Add the SEAGLPA data set (REXX/370 library) or the SEAGALT data set (REXXT alternate library) to the list of APF-authorized libraries. For information on which data set to use, see the comments in the NetView start procedure, CNMPROC. 6. If you plan to use the Tivoli NetView for z/OS Enterprise Management Agent, authorize the following additional libraries: * RKANMOD * RKANMODL * RKANMODU * Any runtime libraries that are concatenated in the STEPLIB DDNAME and in the RKANMODL DDNAME of the CANSNA and CANSDSST started tasks If you specify an unauthorized library on a STEPLIB or concatenate unauthorized libraries with authorized libraries, all libraries are treated as if they are unauthorized. To add the NetView libraries to the list of APF-authorized libraries without requiring an MVS system restart, follow these steps: 1. Enable dynamic APF changes. To do this, issue the following MVS command: SETPROG APF,FORMAT=DYNAMIC 2. Add each NetView library to the list of APF-authorized libraries. To do this, issue the following MVS command for each NetView library that you want to add: SETPROG APF,ADD,DSNAME=dsname,VOLUME=volser If you plan to use the CNMSMF3E sample as an IEFACTRT exit routine, add the CNMSMF3E exit, for example: EXIT ADD EXITNAME(SYS.IEFACTRT) MODNAME(CNMSMF3E) If you want information about...Refer to... APF authorization z/OSR library Tivoli NetView for z/OS Enterprise Management Agent IBM Tivoli NetView for z/OS Installation: Configuring the Tivoli NetView for z/OS Enterprise Agents CNMSMF3E sample IBM Tivoli NetView for z/OS Installation: Configuring Additional Components You need to have all of the libraries that are documented above apf authorized, and in the LINKLST and LPALST as documented. Lizette -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
Thanks. I will follow the steps provided by you and keep you updated with my progress./ Regards Saurabh On Thu, Nov 24, 2011 at 7:40 PM, Lizette Koehler stars...@mindspring.comwrote: Have you followed the Installation process. From the V5R3 manual Tivoli NetView for z/OS, Version 5.3 (Revised September 2008) Member PROGxx contains the names of program libraries that you want the system to concatenate to SYS1.LINKLIB and libraries that you want to define as authorized with the Authorized Program Facility (APF). Use PROGxx instead of using both LNKLSTxx (to concatenate program libraries to SYS1.LINKLIB) and IEAAPFxx (to authorize program libraries to APF). If you are using the LNKLST concatenation instead of a STEPLIB DD statement in your NetViewR startup procedure, update your PROGxx member in the SYS1.PARMLIB data set to include the following program libraries as extensions to the SYS1.LINKLIB data set: * NETVIEW.V5R3M0.CNMLINK * NETVIEW.V5R3M0.SCNMLNKN The SCNMLNKN data set is used for RODM trace, MVST command exit, and DSIPHONE. It is not referenced in the NetView program samples. The following libraries must be authorized with the Authorized Program Facility (APF). To be authorized, a library's name and volume ID must be in the list of authorized libraries in the PROGxx member of SYS1.PARMLIB. 1. If these are not already authorized, authorize all the libraries from the //STEPLIB, //VTAMLIB, and //NCPLOAD concatenations in your VTAMR start procedure. The VTAM start procedure, CNMSJ008 (CNMNET), in NETVIEW.V5R3M0.CNMSAMP is the default member shipped with the NetView program. 2. Authorize all the libraries from the //STEPLIB concatenation in the following procedures: * The NetView start procedure, CNMSJ009 (CNMPROC), in NETVIEW.V5R3M0.CNMSAMP * The NetView procedure to start the subsystem interface (SSI) address space, CNMSJ010 (CNMPSSI), in NETVIEW.V5R3M0.CNMSAMP * The RODM start procedure, EKGXRODM, in NETVIEW.V5R3M0.CNMSAMP * The GMFHS start procedure, CNMSJH10 (CNMGMFHS), in NETVIEW.V5R3M0.CNMSAMP * The Event/Automation Service (E/AS) start procedure, IHSAEVNT, in NETVIEW.V5R3M0.SCNMUXMS 3. Authorize the following NetView libraries: * NETVIEW.V5R3M0.SCNMLNK1 * NETVIEW.V5R3M0.SCNMLPA1 * NETVIEW.V5R3M0.CNMLINK * NETVIEW.V5R3M0.SCNMLNKN * NETVIEW.V5R3M0.SCNMUXLK (if you are using E/AS services) 4. If you are installing the NetView V5R3 Japanese program, authorize the SCNMMJPN data set. This data set is listed in the //STEPLIB concatenation of CNMPROC. 5. Add the SEAGLPA data set (REXX/370 library) or the SEAGALT data set (REXXT alternate library) to the list of APF-authorized libraries. For information on which data set to use, see the comments in the NetView start procedure, CNMPROC. 6. If you plan to use the Tivoli NetView for z/OS Enterprise Management Agent, authorize the following additional libraries: * RKANMOD * RKANMODL * RKANMODU * Any runtime libraries that are concatenated in the STEPLIB DDNAME and in the RKANMODL DDNAME of the CANSNA and CANSDSST started tasks If you specify an unauthorized library on a STEPLIB or concatenate unauthorized libraries with authorized libraries, all libraries are treated as if they are unauthorized. To add the NetView libraries to the list of APF-authorized libraries without requiring an MVS system restart, follow these steps: 1. Enable dynamic APF changes. To do this, issue the following MVS command: SETPROG APF,FORMAT=DYNAMIC 2. Add each NetView library to the list of APF-authorized libraries. To do this, issue the following MVS command for each NetView library that you want to add: SETPROG APF,ADD,DSNAME=dsname,VOLUME=volser If you plan to use the CNMSMF3E sample as an IEFACTRT exit routine, add the CNMSMF3E exit, for example: EXIT ADD EXITNAME(SYS.IEFACTRT) MODNAME(CNMSMF3E) If you want information about...Refer to... APF authorization z/OSR library Tivoli NetView for z/OS Enterprise Management Agent IBM Tivoli NetView for z/OS Installation: Configuring the Tivoli NetView for z/OS Enterprise Agents CNMSMF3E sample IBM Tivoli NetView for z/OS Installation: Configuring Additional Components You need to have all of the libraries that are documented above apf authorized, and in the LINKLST and LPALST as documented. Lizette -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- Thanks Regards Saurabh Khandelwal -- For IBM-MAIN subscribe / signoff / archive access instructions, send
Re: NetView Startup problem
Also I dont have CNMLINK. I just have ACNMLINK in below dataset, and CNMINIT member exist in this. There are two datasets created by SMP/E process TLIB and DLIB The TLIB will have a name like CNMLINK or it might be called SCNMLINK. It will depend on your version of Netview. The DLIB will have a name like ACNMLINK The install documents should say use (S)CNMLINK not the ACNMLINK. CNMLINK needs to be APF Authorized. The z/OS (and earlier releases of the operating system) used a name like A??? to indicate a distribution (DLIB) and ??? as the product library name. This one is used for running the product. In Option 3.4 (as indicated by David) enter **.*CNMLINK in the dataset name in the middle of the panel. You should see both the DLIB and TLIB datasets. Use the TLIB - The TLIB is the one without the A at the beginning. HTH Lizette -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
Hi Saurabh, One way you can get the actual library name for CNMLINK: 1. Crank up SMP/E and search your TARGET zone for the LMOD that is named in your S806-4 messages. The LMOD entry should give you a LIBDEF name for the library containing the LMOD. 2. Again using SMP/E, look in your TARGET zone for the LIBDEF of that name. The LIBDEF entry should give you the dataset name. Be sure that the named dataset appears in your STEPLIB or PROGxx list for LINKLIST. Also be sure that it's in the list for APF libraries. Chances are fairly good that this will solve the S806-4 ABEND as well as the S0C4 abend. Rick -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
NetView Startup problem
Hello, I am trying to bring up Netveiw address spaces. but I proc is abended with 0C4. I tried isolating using help of google but it didnt helped me much. 1) S NETVSSI STMT NO. MESSAGE 2 IEFC001I PROCEDURE NETVSSI WAS EXPANDED USING SYSTEM LIBRARY TIVOLI.PROCLIB IEF695I START NETVSSI WITH JOBNAME NETVSSI IS ASSIGNED TO USER SYSSTC , GROUP SYSPROC IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED IEA995I SYMPTOM DUMP OUTPUT SYSTEM COMPLETION CODE=0C4 REASON CODE=0011 TIME=07.51.49 SEQ=00072 CPU= ASID=0066 PSW AT TIME OF ERROR 078D1000 8746 ILC 4 INTC 11 ACTIVE LOAD MODULE ADDRESS=78D8 OFFSET=0E6E NAME=CNMINIT DATA AT PSW 8740 - 001058E0 908C5810 E1DC5910 2) S NETVIEW 07.52.36 STC00667 FRIDAY,20 DEC 2013 07.52.36 STC00667 IEF695I START NETVIEW WITH JOBNAME NETVIEW IS ASSIGNED TO USER SYSSTC , GROUP SYSPROC 07.52.36 STC00667 $HASP373 NETVIEW STARTED 07.52.36 STC00667 IEF403I NETVIEW - STARTED - TIME=07.52.36 07.52.37 STC00667 - --TIMINGS (MINS.)--PAGING COUNTS--- 07.52.37 STC00667 -JOBNAME STEPNAME PROCSTEPRC EXCPCPUSRB CLOCK SERV PG PAGE SWAPVIO SWAPS STEPNO 07.52.37 STC00667 -NETVIEW STEP1 00652.00 .00.02 1633 0 0 0 0 0 1 07.52.37 STC00667 CSV003I REQUESTED MODULE CNMPPNOT FOUND 07.52.37 STC00667 CSV028I ABEND806-04 JOBNAME=NETVIEW STEPNAME=NETVIEW 07.52.37 STC00667 IEA995I SYMPTOM DUMP OUTPUT 378 378 SYSTEM COMPLETION CODE=806 REASON CODE=0004 378 TIME=07.52.37 SEQ=00074 CPU= ASID=0066 378 PSW AT TIME OF ERROR 070C1000 8128BBD0 ILC 2 INTC 0D 378NO ACTIVE MODULE FOUND 378NAME=UNKNOWN Please help me to resolve this issue Regards Saurabh -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
On Wed, 23 Nov 2011 15:35:56 +0530 saurabh khandelwal sourabhkhandelwal...@gmail.com wrote: :Hello, :I am trying to bring up Netveiw address spaces. but I proc is :abended with 0C4. I tried isolating using help of google but it didnt :helped me much. : :1) S NETVSSI : : STMT NO. MESSAGE : 2 IEFC001I PROCEDURE NETVSSI WAS EXPANDED USING SYSTEM LIBRARY :TIVOLI.PROCLIB : IEF695I START NETVSSI WITH JOBNAME NETVSSI IS ASSIGNED TO USER SYSSTC , :GROUP SYSPROC You should figure out why this is happening. : IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED : IEA995I SYMPTOM DUMP OUTPUT : SYSTEM COMPLETION CODE=0C4 REASON CODE=0011 : TIME=07.51.49 SEQ=00072 CPU= ASID=0066 : PSW AT TIME OF ERROR 078D1000 8746 ILC 4 INTC 11 :ACTIVE LOAD MODULE ADDRESS=78D8 OFFSET=0E6E :NAME=CNMINIT :DATA AT PSW 8740 - 001058E0 908C5810 E1DC5910 : : :2) S NETVIEW : :07.52.36 STC00667 FRIDAY,20 DEC 2013 : 07.52.36 STC00667 IEF695I START NETVIEW WITH JOBNAME NETVIEW IS :ASSIGNED TO USER SYSSTC , GROUP SYSPROC : 07.52.36 STC00667 $HASP373 NETVIEW STARTED : 07.52.36 STC00667 IEF403I NETVIEW - STARTED - TIME=07.52.36 : 07.52.37 STC00667 - --TIMINGS :(MINS.)--PAGING COUNTS--- : 07.52.37 STC00667 -JOBNAME STEPNAME PROCSTEPRC EXCPCPUSRB :CLOCK SERV PG PAGE SWAPVIO SWAPS STEPNO : 07.52.37 STC00667 -NETVIEW STEP1 00652.00 :.00.02 1633 0 0 0 0 0 1 As well, this. : 07.52.37 STC00667 CSV003I REQUESTED MODULE CNMPPNOT FOUND : 07.52.37 STC00667 CSV028I ABEND806-04 JOBNAME=NETVIEW STEPNAME=NETVIEW : 07.52.37 STC00667 IEA995I SYMPTOM DUMP OUTPUT 378 :378 SYSTEM COMPLETION CODE=806 REASON CODE=0004 :378 TIME=07.52.37 SEQ=00074 CPU= ASID=0066 :378 PSW AT TIME OF ERROR 070C1000 8128BBD0 ILC 2 INTC :0D :378NO ACTIVE MODULE FOUND :378NAME=UNKNOWN : : :Please help me to resolve this issue Talk to the SP that installed the system. Also, regarding the 0C4 - open a problem ticket with IBM. -- Binyamin Dissen bdis...@dissensoftware.com http://www.dissensoftware.com Director, Dissen Software, Bar Grill - Israel Should you use the mailblocks package and expect a response from me, you should preauthorize the dissensoftware.com domain. I very rarely bother responding to challenge/response systems, especially those from irresponsible companies. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: NetView Startup problem
Saurabh Please help me to resolve this issue I tend not to deal with issues, but rather more with problems and, this being a case of something you apparently expected to work but which clearly didn't (note the apostrophe), I would classify as a *problem*. The appropriate forum for dealing with problems related NetView is the following: http://tech.groups.yahoo.com/group/NetView/ This is quite an active forum and I have seen NetView development folk participating. That said, there is quite a lot you can do with the information you posted. - Although generally Google is your friend, a good place to start can also be the IBM message look-up facility: http://www-03.ibm.com/systems/z/os/zos/bkserv/lookat/index.html IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED quote IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED Explanation: The initiator found that a program to be run did not satisfy all the requirements needed to obtain all the special properties designated by the program name. - If the program to be run is not a single step job or task, the system nullifies the NODSI parameter. All other program properties remain in effect. - If the program to be run is not a started task that runs only a single step, the system nullifies the SYST parameter. All other program properties remain in effect. - If a non-APF authorized JOBLIB or STEPLIB statement is present, the system nullifies all Program Properties table (PPT) parameters. System Action: The system assigns problem program attributes in place of the special properties. System Programmer Response: If no special properties are required, no action is necessary. If special properties are required and a JOBLIB or STEPLIB is in use, ensure that the JOBLIB or STEPLIB data sets are APF authorized. Also ensure the special attributes 'started only' or '1-step only' are satisfied for the required special properties. Source: Initiator/terminator /quote http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/IEA2M8C0/SPTGG188I Find the name of the program used in the NETVSSI procedure and check what characteristics it has in the IEFSDPPT module as described in the section 76.7 Program properties table (PPT) of the z/OS MVS Initialization and Tuning Reference manual. http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/iea2e2c0/76.7 Check whether there is an override provided by a PPT statement in the active SCHEDxx member and, if so, what that specifies rather than the code in the IEFSDPPT module. If all this is a bit complex, post the NETVSSI procedure and any relevant SCHEDxx member from your SYS1.PARMLIB. - 07.52.37 STC00667 CSV003I REQUESTED MODULE CNMPPNOT FOUND This one should be simplicity itself! Find out which partitioned data set (PDS - library) containing load modules contains the CNMPP module and then why that PDS is *not* in the STEPLIB concatenation of the NetView program in the NETVIEW procedure. - And please tell us how you got on! Chris Mason On Wed, 23 Nov 2011 15:35:56 +0530, saurabh khandelwal sourabhkhandelwal...@gmail.com wrote: Hello, I am trying to bring up Netveiw address spaces. but I proc is abended with 0C4. I tried isolating using help of google but it didnt helped me much. 1) S NETVSSI STMT NO. MESSAGE 2 IEFC001I PROCEDURE NETVSSI WAS EXPANDED USING SYSTEM LIBRARY TIVOLI.PROCLIB IEF695I START NETVSSI WITH JOBNAME NETVSSI IS ASSIGNED TO USER SYSSTC , GROUP SYSPROC IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED IEA995I SYMPTOM DUMP OUTPUT SYSTEM COMPLETION CODE=0C4 REASON CODE=0011 TIME=07.51.49 SEQ=00072 CPU= ASID=0066 PSW AT TIME OF ERROR 078D1000 8746 ILC 4 INTC 11 ACTIVE LOAD MODULE ADDRESS=78D8 OFFSET=0E6E NAME=CNMINIT DATA AT PSW 8740 - 001058E0 908C5810 E1DC5910 2) S NETVIEW 07.52.36 STC00667 FRIDAY,20 DEC 2013 07.52.36 STC00667 IEF695I START NETVIEW WITH JOBNAME NETVIEW IS ASSIGNED TO USER SYSSTC , GROUP SYSPROC 07.52.36 STC00667 $HASP373 NETVIEW STARTED 07.52.36 STC00667 IEF403I NETVIEW - STARTED - TIME=07.52.36 07.52.37 STC00667 - --TIMINGS (MINS.)--PAGING COUNTS--- 07.52.37 STC00667 -JOBNAME STEPNAME PROCSTEPRC EXCPCPUSRB CLOCK SERV PG PAGE SWAPVIO SWAPS STEPNO 07.52.37 STC00667 -NETVIEW STEP1 00652.00 .00.02 1633 0 0 0 0 0 1 07.52.37 STC00667 CSV003I REQUESTED MODULE CNMPPNOT FOUND 07.52.37 STC00667 CSV028I ABEND806-04 JOBNAME=NETVIEW STEPNAME=NETVIEW 07.52.37 STC00667 IEA995I SYMPTOM DUMP OUTPUT 378 378 SYSTEM COMPLETION CODE=806 REASON CODE=0004 378 TIME=07.52.37 SEQ=00074 CPU= ASID=0066 378 PSW AT TIME OF ERROR 070C1000 8128BBD0 ILC 2 INTC 0D 378NO ACTIVE MODULE FOUND 378
Re: NetView Startup problem
Thanks all of you. I will try to check the Netview library for APF authorization. also I will post this problem on Netview group. Thanks again. On Wed, Nov 23, 2011 at 5:56 PM, Chris Mason chrisma...@belgacom.netwrote: Saurabh Please help me to resolve this issue I tend not to deal with issues, but rather more with problems and, this being a case of something you apparently expected to work but which clearly didn't (note the apostrophe), I would classify as a *problem*. The appropriate forum for dealing with problems related NetView is the following: http://tech.groups.yahoo.com/group/NetView/ This is quite an active forum and I have seen NetView development folk participating. That said, there is quite a lot you can do with the information you posted. - Although generally Google is your friend, a good place to start can also be the IBM message look-up facility: http://www-03.ibm.com/systems/z/os/zos/bkserv/lookat/index.html IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED quote IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED Explanation: The initiator found that a program to be run did not satisfy all the requirements needed to obtain all the special properties designated by the program name. - If the program to be run is not a single step job or task, the system nullifies the NODSI parameter. All other program properties remain in effect. - If the program to be run is not a started task that runs only a single step, the system nullifies the SYST parameter. All other program properties remain in effect. - If a non-APF authorized JOBLIB or STEPLIB statement is present, the system nullifies all Program Properties table (PPT) parameters. System Action: The system assigns problem program attributes in place of the special properties. System Programmer Response: If no special properties are required, no action is necessary. If special properties are required and a JOBLIB or STEPLIB is in use, ensure that the JOBLIB or STEPLIB data sets are APF authorized. Also ensure the special attributes 'started only' or '1-step only' are satisfied for the required special properties. Source: Initiator/terminator /quote http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/IEA2M8C0/SPTGG188I Find the name of the program used in the NETVSSI procedure and check what characteristics it has in the IEFSDPPT module as described in the section 76.7 Program properties table (PPT) of the z/OS MVS Initialization and Tuning Reference manual. http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/iea2e2c0/76.7 Check whether there is an override provided by a PPT statement in the active SCHEDxx member and, if so, what that specifies rather than the code in the IEFSDPPT module. If all this is a bit complex, post the NETVSSI procedure and any relevant SCHEDxx member from your SYS1.PARMLIB. - 07.52.37 STC00667 CSV003I REQUESTED MODULE CNMPPNOT FOUND This one should be simplicity itself! Find out which partitioned data set (PDS - library) containing load modules contains the CNMPP module and then why that PDS is *not* in the STEPLIB concatenation of the NetView program in the NETVIEW procedure. - And please tell us how you got on! Chris Mason On Wed, 23 Nov 2011 15:35:56 +0530, saurabh khandelwal sourabhkhandelwal...@gmail.com wrote: Hello, I am trying to bring up Netveiw address spaces. but I proc is abended with 0C4. I tried isolating using help of google but it didnt helped me much. 1) S NETVSSI STMT NO. MESSAGE 2 IEFC001I PROCEDURE NETVSSI WAS EXPANDED USING SYSTEM LIBRARY TIVOLI.PROCLIB IEF695I START NETVSSI WITH JOBNAME NETVSSI IS ASSIGNED TO USER SYSSTC , GROUP SYSPROC IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED IEA995I SYMPTOM DUMP OUTPUT SYSTEM COMPLETION CODE=0C4 REASON CODE=0011 TIME=07.51.49 SEQ=00072 CPU= ASID=0066 PSW AT TIME OF ERROR 078D1000 8746 ILC 4 INTC 11 ACTIVE LOAD MODULE ADDRESS=78D8 OFFSET=0E6E NAME=CNMINIT DATA AT PSW 8740 - 001058E0 908C5810 E1DC5910 2) S NETVIEW 07.52.36 STC00667 FRIDAY,20 DEC 2013 07.52.36 STC00667 IEF695I START NETVIEW WITH JOBNAME NETVIEW IS ASSIGNED TO USER SYSSTC , GROUP SYSPROC 07.52.36 STC00667 $HASP373 NETVIEW STARTED 07.52.36 STC00667 IEF403I NETVIEW - STARTED - TIME=07.52.36 07.52.37 STC00667 - --TIMINGS (MINS.)--PAGING COUNTS--- 07.52.37 STC00667 -JOBNAME STEPNAME PROCSTEPRC EXCPCPUSRB CLOCK SERV PG PAGE SWAPVIO SWAPS STEPNO 07.52.37 STC00667 -NETVIEW STEP1 00652.00 .00.02 1633 0 0 0 0 0 1 07.52.37 STC00667 CSV003I REQUESTED MODULE CNMPPNOT FOUND 07.52.37 STC00667 CSV028I ABEND806-04 JOBNAME=NETVIEW STEPNAME=NETVIEW 07.52.37 STC00667 IEA995I SYMPTOM DUMP OUTPUT
Re: NetView Startup problem
Abend is due to: 07.52.37 STC00667 CSV003I REQUESTED MODULE CNMPPNOT FOUND 07.52.37 STC00667 CSV028I ABEND806-04 JOBNAME=NETVIEW Module CNMPP should be in SYS1.NETVIEW.CNMLINK Check LINKLIST or STEPLIB -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of saurabh khandelwal Sent: Wednesday, November 23, 2011 7:35 AM To: IBM-MAIN@bama.ua.edu Subject: Re: NetView Startup problem Thanks all of you. I will try to check the Netview library for APF authorization. also I will post this problem on Netview group. Thanks again. On Wed, Nov 23, 2011 at 5:56 PM, Chris Mason chrisma...@belgacom.netwrote: Saurabh Please help me to resolve this issue I tend not to deal with issues, but rather more with problems and, this being a case of something you apparently expected to work but which clearly didn't (note the apostrophe), I would classify as a *problem*. The appropriate forum for dealing with problems related NetView is the following: http://tech.groups.yahoo.com/group/NetView/ This is quite an active forum and I have seen NetView development folk participating. That said, there is quite a lot you can do with the information you posted. - Although generally Google is your friend, a good place to start can also be the IBM message look-up facility: http://www-03.ibm.com/systems/z/os/zos/bkserv/lookat/index.html IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED quote IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED Explanation: The initiator found that a program to be run did not satisfy all the requirements needed to obtain all the special properties designated by the program name. - If the program to be run is not a single step job or task, the system nullifies the NODSI parameter. All other program properties remain in effect. - If the program to be run is not a started task that runs only a single step, the system nullifies the SYST parameter. All other program properties remain in effect. - If a non-APF authorized JOBLIB or STEPLIB statement is present, the system nullifies all Program Properties table (PPT) parameters. System Action: The system assigns problem program attributes in place of the special properties. System Programmer Response: If no special properties are required, no action is necessary. If special properties are required and a JOBLIB or STEPLIB is in use, ensure that the JOBLIB or STEPLIB data sets are APF authorized. Also ensure the special attributes 'started only' or '1-step only' are satisfied for the required special properties. Source: Initiator/terminator /quote http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/IEA2M8C0/SPTGG188I Find the name of the program used in the NETVSSI procedure and check what characteristics it has in the IEFSDPPT module as described in the section 76.7 Program properties table (PPT) of the z/OS MVS Initialization and Tuning Reference manual. http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/iea2e2c0/76.7 Check whether there is an override provided by a PPT statement in the active SCHEDxx member and, if so, what that specifies rather than the code in the IEFSDPPT module. If all this is a bit complex, post the NETVSSI procedure and any relevant SCHEDxx member from your SYS1.PARMLIB. - 07.52.37 STC00667 CSV003I REQUESTED MODULE CNMPPNOT FOUND This one should be simplicity itself! Find out which partitioned data set (PDS - library) containing load modules contains the CNMPP module and then why that PDS is *not* in the STEPLIB concatenation of the NetView program in the NETVIEW procedure. - And please tell us how you got on! Chris Mason On Wed, 23 Nov 2011 15:35:56 +0530, saurabh khandelwal sourabhkhandelwal...@gmail.com wrote: Hello, I am trying to bring up Netveiw address spaces. but I proc is abended with 0C4. I tried isolating using help of google but it didnt helped me much. 1) S NETVSSI STMT NO. MESSAGE 2 IEFC001I PROCEDURE NETVSSI WAS EXPANDED USING SYSTEM LIBRARY TIVOLI.PROCLIB IEF695I START NETVSSI WITH JOBNAME NETVSSI IS ASSIGNED TO USER SYSSTC , GROUP SYSPROC IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED IEA995I SYMPTOM DUMP OUTPUT SYSTEM COMPLETION CODE=0C4 REASON CODE=0011 TIME=07.51.49 SEQ=00072 CPU= ASID=0066 PSW AT TIME OF ERROR 078D1000 8746 ILC 4 INTC 11 ACTIVE LOAD MODULE ADDRESS=78D8 OFFSET=0E6E NAME=CNMINIT DATA AT PSW 8740 - 001058E0 908C5810 E1DC5910 2) S NETVIEW 07.52.36 STC00667 FRIDAY,20 DEC 2013 07.52.36 STC00667 IEF695I START NETVIEW WITH JOBNAME NETVIEW IS ASSIGNED TO USER SYSSTC , GROUP SYSPROC 07.52.36 STC00667 $HASP373 NETVIEW STARTED 07.52.36 STC00667 IEF403I NETVIEW - STARTED - TIME=07.52.36 07.52.37 STC00667 - --TIMINGS (MINS.)--PAGING COUNTS
Re: NetView Startup problem
* **NETVIEW WILL GENERATE AN ARM XX* **ELEMENT NAME AS FOLLOWS: XX* **'NETVIEW$' CONCATENATED WITH XX* **THE SSI/PPI SUBSYSTEM NAME XX* **CONCATENATED WITH SYSCLONE XX* ** NAME = ARM ENABLEMENT BY NAME XX* ** *NOARM = NO ARM ENABLEMENT XX* ** DEFAULT OPTION = *NOARM XX* ** COMMENTING OUT THE 'ARM=...' PARAMETER XX* ** RESULTS IN NO NETVIEW ARM ENABLEMENT XX* 4 XXNETV53S EXEC PGM=PROG,TIME=1440,REGION=REG.K, XX PARM=(MBUF,CBUF,'DSIG','MSGIFAC','PPIOPT','ARM'), XX DPRTY=(13,13) XX* XX*STEPLIB DD DSN=SQ1..CNMLINK,DISP=SHR IEFC653I SUBSTITUTION JCL - PGM=CNMINIT,TIME=1440,REGION=6144K,PARM=(8192,2048,'%','SYSTEM','PPI','*NOARM'), DPRTY=(13,13) 5 XXSTEPLIB DD DSN=DLIB.NV390.V5R3.ACNMLINK,DISP=SHR 6 XXSYSPRINT DD SYSOUT=H XX* On Wed, Nov 23, 2011 at 7:16 PM, Barkow, Eileen ebar...@doitt.nyc.govwrote: Abend is due to: 07.52.37 STC00667 CSV003I REQUESTED MODULE CNMPPNOT FOUND 07.52.37 STC00667 CSV028I ABEND806-04 JOBNAME=NETVIEW Module CNMPP should be in SYS1.NETVIEW.CNMLINK Check LINKLIST or STEPLIB -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of saurabh khandelwal Sent: Wednesday, November 23, 2011 7:35 AM To: IBM-MAIN@bama.ua.edu Subject: Re: NetView Startup problem Thanks all of you. I will try to check the Netview library for APF authorization. also I will post this problem on Netview group. Thanks again. On Wed, Nov 23, 2011 at 5:56 PM, Chris Mason chrisma...@belgacom.net wrote: Saurabh Please help me to resolve this issue I tend not to deal with issues, but rather more with problems and, this being a case of something you apparently expected to work but which clearly didn't (note the apostrophe), I would classify as a *problem*. The appropriate forum for dealing with problems related NetView is the following: http://tech.groups.yahoo.com/group/NetView/ This is quite an active forum and I have seen NetView development folk participating. That said, there is quite a lot you can do with the information you posted. - Although generally Google is your friend, a good place to start can also be the IBM message look-up facility: http://www-03.ibm.com/systems/z/os/zos/bkserv/lookat/index.html IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED quote IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED Explanation: The initiator found that a program to be run did not satisfy all the requirements needed to obtain all the special properties designated by the program name. - If the program to be run is not a single step job or task, the system nullifies the NODSI parameter. All other program properties remain in effect. - If the program to be run is not a started task that runs only a single step, the system nullifies the SYST parameter. All other program properties remain in effect. - If a non-APF authorized JOBLIB or STEPLIB statement is present, the system nullifies all Program Properties table (PPT) parameters. System Action: The system assigns problem program attributes in place of the special properties. System Programmer Response: If no special properties are required, no action is necessary. If special properties are required and a JOBLIB or STEPLIB is in use, ensure that the JOBLIB or STEPLIB data sets are APF authorized. Also ensure the special attributes 'started only' or '1-step only' are satisfied for the required special properties. Source: Initiator/terminator /quote http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/IEA2M8C0/SPTGG188I Find the name of the program used in the NETVSSI procedure and check what characteristics it has in the IEFSDPPT module as described in the section 76.7 Program properties table (PPT) of the z/OS MVS Initialization and Tuning Reference manual. http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/iea2e2c0/76.7 Check whether there is an override provided by a PPT statement in the active SCHEDxx member and, if so, what that specifies rather than the code in the IEFSDPPT module. If all this is a bit complex, post the NETVSSI procedure and any relevant SCHEDxx member from your SYS1.PARMLIB. - 07.52.37 STC00667 CSV003I REQUESTED MODULE CNMPPNOT FOUND This one should be simplicity itself! Find out which partitioned data set (PDS - library) containing load modules contains the CNMPP module and then why
