Re: SMF record - Looping and Memory shortage

[Schroeder, Wayne]

I think he means go into SDSF and change the SRVCLASS on the fly. We used to do 
it to jobs or STC’s that would “go crazy”.

Wayne Schroeder
Mainframe Systems Programmer -DASD/Tape Storage
Texas Farm Bureau Mutual Insurance Company , Waco TX

“There is no new JCL: Every bit of JCL is descended from a fragment found on a
stone tablet on the side of a mountain near Poughkeepsie back in the early 
1960s”

Mobile:254.644.8534
Email:  wschroe...@txfb-ins.com

7420 Fish Pond Rd.
Waco, TX 76710

From: IBM Mainframe Discussion List  On Behalf Of Ed 
Jaffe
Sent: Thursday, March 17, 2022 9:16 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: SMF record - Looping and Memory shortage

On 3/17/2022 7:11 PM, CM Poncelet wrote:
> I can't remember the SMF record details, but the dispatch priority of
> address spaces can be lowered 'on the fly' via SDSF (or CA's Sysview, if
> memory serves) to swap them out and prevent them from grabbing storage
> at the expense of what would now be higher priority ASIDs.

Sounds like you're thinking of the MVS RESET QUIESCE command...

RESET jobname,QUIESCE


--
Phoenix Software International
Edward E. Jaffe
831 Parkview Drive North
El Segundo, CA 90245
https://www.phoenixsoftware.com/



This e-mail message, including any attachments, appended messages and the
information contained therein, is for the sole use of the intended
recipient(s). If you are not an intended recipient or have otherwise
received this email message in error, any use, dissemination, distribution,
review, storage or copying of this e-mail message and the information
contained therein is strictly prohibited. If you are not an intended
recipient, please contact the sender by reply e-mail and destroy all copies
of this email message and do not otherwise utilize or retain this email
message or any or all of the information contained therein. Although this
email message and any attachments or appended messages are believed to be
free of any virus or other defect that might affect any computer system into
which it is received and opened, it is the responsibility of the recipient
to ensure that it is virus free and no responsibility is accepted by the
sender for any loss or damage arising in any way from its opening or use.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with 
the message: INFO IBM-MAIN
[http://www.txfb-ins.com/TFBICImages/jdpower.jpg]
WWW.TXFB-INS.COM

CONFIDENTIALITY STATEMENT: The foregoing message (including attachments) is 
covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 
2510-2521, and is CONFIDENTIAL. If you believe that it has been sent to you in 
error, do not read it. If you are not the intended recipient, you are hereby 
notified that any retention, dissemination, distribution, or copying of this 
communication is strictly prohibited. Please reply to the sender that you have 
received the message in error, then delete it. Thank you. '

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: automatic tape library - DR

[Schroeder, Wayne]

CONFIDENTIALITY STATEMENT: 

The foregoing message (including attachments) is covered by the Electronic 
Communication Privacy Act, 18 U.S.C. sections 2510-2521, and is CONFIDENTIAL. 
If you believe that it has been sent to you in error, do not read it. If you 
are not the intended recipient, you are hereby notified that any retention, 
dissemination, distribution, or copying of this communication is strictly 
prohibited. Please reply to the sender that you have received the message in 
error, then delete it. Thank you.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: SMS STORGRP question

[Schroeder, Wayne]

Hey Jesse,
I have the same setup but I have my OVERFLOW volumes set as QUINEW so they are 
only used if the original SG can't hold all of the data. Hope this helps.

Wayne Schroeder
Mainframe Storage Administrator

T  254.399.5070
M 254.644.8534
E wschroe...@txfb-ins.com

7420 Fish Pond Rd.
Waco, TX 76710


-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Jesse 1 Robinson
Sent: Friday, April 21, 2017 7:43 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: SMS STORGRP question

'Forever' we have directed DUMPSRV SVC dumps via ACS routine to STORGRP 
'SVCDUMP', which is defined to a small set of volumes called SVCDxx. We had a 
(major) problem a while back when DB2/CICS wanted to take a humongous dump that 
exceeded the available capacity of of the SVCDxx volumes. So we *added* group 
'OVERFLOW' to the ACS routine expecting this much larger group to accommodate 
dumps that SVCDUMP could not handle. Much to our chagrin, from that moment 
forward, *all* SVCDUMPs went directly to OVERFLOW without even trying to find 
space in group SVCDUMP. We have an RYO mechanism to manage dumps created on 
volume SVCDxx, so dumps created elsewhere are a problem we can live with on 
occasion but not regularly.

I know there are various ways to resolve to this problem, but I want to know 
why SMS is behaving this way and whether there is a purely SMS solution: try 
SVCDUMP first; if no room, then try OVERFLOW. In that order.

.
.
J.O.Skip Robinson
Southern California Edison Company
Electric Dragon Team Paddler
SHARE MVS Program Co-Manager
323-715-0595 Mobile
626-543-6132 Office <= NEW
robin...@sce.com


--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

[http://www.txfb-ins.com/TFBICImages/email.jpg]
J.D. Power Disclaimer


CONFIDENTIALITY STATEMENT: The foregoing message (including attachments) is 
covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 
2510-2521, and is CONFIDENTIAL. If you believe that it has been sent to you in 
error, do not read it. If you are not the intended recipient, you are hereby 
notified that any retention, dissemination, distribution, or copying of this 
communication is strictly prohibited. Please reply to the sender that you have 
received the message in error, then delete it. Thank you.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Help understanding a zFS error

[Schroeder, Wayne]

Lizette,
Here is what I found on IBM site.
OA06260: USING THE ISHELL INTERFACE TO CREATE A NEW ZFS FAILS WITH ERRNO ENOMEM 
RSN EF176311 User attempting to use the ishell interface to 'create a new
zfs' fails with
Errno=84x ENOMEM: Not enough space is available. Reason=EF176311
The errno ENOMEM is inaccurate and the zfs reaason code does not
provide sufficient info to diagnose the problem.
The 'real' cause of the problem in this case was the user was
not permitted to the required RACF facility class profile as
documented in the Distributed File SErvice ZFS Administration
publication under the 'Privilege Required' for zfsadm create.


Wayne Schroeder
MAINFRAME STORAGE ADMINISTRATOR

T  254.399.5070
M 254.644.8534
E wschroe...@txfb-ins.com

7420 Fish Pond Rd.
Waco, TX 76710


-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Lizette Koehler
Sent: Thursday, November 06, 2014 9:12 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Help understanding a zFS error

We are z/OS V1.12 heading to V2.1

On one of my LPARs I get the following message when I use ISHELL to allocate a 
new small zFS File (5cyls by 1 cyls).  I did not even get a chance to format it 
as the zFS was deleted when I hit enter.

Where would I find the ERRNO=84x?


Errno=84x ENOMEM: Not enough space is available.  Reason=EFE1670Ax
Description: Internal failure obtaining memory for operation.  Press Enter to 
continue.

I found the 670A as
670A Internal failure obtaining memory for operation
Action: An internal failure occurred. Contact the service representative.

But no other hits.

Is the service representative the Sysprog?
An internal error, should I see any additional SYSLOG or Joblog (zfs) messages 
to help isolate the cause?

Or is this one of those - Call IBM solutions?

I am finding the reason codes for zFS unfulfilling

Lizette

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN
[http://infonet.txfb-ins.com//images//email-signature-image.jpg]


WWW.TXFB-INS.COMhttp://www.txfb-ins.com

Texas Farm Bureau Insurance received the highest numerical score among auto 
insurance providers in Texas in the proprietary J.D. Power 2012-2014 U.S. Auto 
Insurance Studies SM (Central Region in 2012). 2014 Study based on 44,661 total 
responses measuring 8 providers in Texas and measures opinions of consumers 
with their auto insurance provider. Proprietary study results are based on 
experiences and perceptions of consumers surveyed March-April 2014. Your 
experiences may vary. Visit jdpower.com. © 2014 Texas Farm Bureau Insurance 
Companies.

CONFIDENTIALITY STATEMENT: The foregoing message (including attachments) is 
covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 
2510-2521, and is CONFIDENTIAL. If you believe that it has been sent to you in 
error, do not read it. If you are not the intended recipient, you are hereby 
notified that any retention, dissemination, distribution, or copying of this 
communication is strictly prohibited. Please reply to the sender that you have 
received the message in error, then delete it. Thank you.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: RMM question about adding VRS

[Schroeder, Wayne]

Thank you Mike I will give it a shot!

Thank you,

Wayne Schroeder
MAINFRAME STORAGE ADMINISTRATOR

T  254.399.5070
M 254.644.8534
E wschroe...@txfb-ins.com

7420 Fish Pond Rd.
Waco, TX 76710

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Mike Wood
Sent: Saturday, April 05, 2014 9:26 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: RMM question about adding VRS

...small addendum to my reply
re: step #2
 Without checking the full flow of command processing I cant be absolutely 
certain any more of what rmm does.
However, as I said, it should allow you to change the location information to 
reflect the actual situation via commands.
You might have to add NOEJECT operand because rmm believes the volume is 
library resident - depends how you 'manually' ejected it. If RMM shows volume 
is 'in transit' you dont need NOEJECT.
I know that when the TCDB is not connected or library is off-line you can even 
add FORCE operand that enables some subset of failing commands to work in any 
case.

Hope that helps,
Mike

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN
[http://infonet.txfb-ins.com//images//email-signature-image.jpg]
WWW.TXFB-INS.COMhttp://www.txfb-ins.com

CONFIDENTIALITY STATEMENT: The foregoing message (including attachments) is 
covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 
2510-2521, and is CONFIDENTIAL. If you believe that it has been sent to you in 
error, do not read it. If you are not the intended recipient, you are hereby 
notified that any retention, dissemination, distribution, or copying of this 
communication is strictly prohibited. Please reply to the sender that you have 
received the message in error, then delete it. Thank you.

Texas Farm Bureau Insurance Companies received the highest numerical score 
among auto insurance providers in Texas in the proprietary J.D. Power 2013 U.S. 
Auto Insurance Study(SM). Study based on 45,521 total responses measuring 8 
providers in Texas and measures opinions of consumers with their auto insurance 
provider. Proprietary study results are based on experiences and perceptions of 
consumers surveyed March –April 2013. Your experiences may vary. Visit 
jdpower.com.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

RMM question about adding VRS

[Schroeder, Wayne]

List,
I have been archiving SMF/RMF data to a 3592 tape then manually ejecting it and 
carry it offsite therefor the location is still listed as LIBATL1 in the RMM 
database. I would like to automate this process and add a VRS rule to send it 
offsite. If I add a VRS rule for these datasets, what will RMM do during the 
Housekeeping phase as far as the LOCATION is concerned? Will RMM eject the tape 
even though it is not in the ATL and will he change the LOCATION to OFFSITE as 
per the rule? I have around 30 tapes in this scenario. Maybe I should just 
retrieve them from the OFFSITE vault location, insert them in the ATL then 
install the VRS rule and let RMM handle it the clean and proper way.

Any help would be appreciated.

Thank you,

Wayne Schroeder
MAINFRAME STORAGE ADMINISTRATOR

T  254.399.5070
M 254.644.8534
E wschroe...@txfb-ins.com

7420 Fish Pond Rd.
Waco, TX 76710



[http://infonet.txfb-ins.com//images//email-signature-image.jpg]
WWW.TXFB-INS.COMhttp://www.txfb-ins.com

CONFIDENTIALITY STATEMENT: The foregoing message (including attachments) is 
covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 
2510-2521, and is CONFIDENTIAL. If you believe that it has been sent to you in 
error, do not read it. If you are not the intended recipient, you are hereby 
notified that any retention, dissemination, distribution, or copying of this 
communication is strictly prohibited. Please reply to the sender that you have 
received the message in error, then delete it. Thank you.

Texas Farm Bureau Insurance Companies received the highest numerical score 
among auto insurance providers in Texas in the proprietary J.D. Power 2013 U.S. 
Auto Insurance Study(SM). Study based on 45,521 total responses measuring 8 
providers in Texas and measures opinions of consumers with their auto insurance 
provider. Proprietary study results are based on experiences and perceptions of 
consumers surveyed March -April 2013. Your experiences may vary. Visit 
jdpower.com.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: RMM CDS utilization vs 3.4 utilization

[Schroeder, Wayne]

Mike,
I really appreciate your response. I am someone that was asked to oversee RMM 
and am not completely familiar with the workings of RMM and with that said I 
would like to see an example supplied and discussed in the I  C manual under 
the chapter titled Monitoring the Space Used by the Control Data Set to run jcl 
like the one supplied in the Moving the Control Data Set that uses the 
Backup(DSS) example to copy the cds to a new cds. Your example could include a 
Backup(DSS) step and a then a step to RENAMEU the old cds to a new cds name 
then discuss the HURBA/HARBA * 100 calculation to show the programmer the 
percentage of free space actually inside the working cds. We do not regularly 
reorganize our CDS but we are I the process of moving it and found out that we 
are only using 25% of 41000 tracks (in 5 extents) in our working CDS. That is a 
lot of wasted space that I did not find out about until I HAD to move our CDS. 
This will all be a moot point once we turn on CA RECLAIM. Sorry for the rant.

Thank you,

Wayne Schroeder
MAINFRAME STORAGE ADMINISTRATOR

T  254.399.5070
M 254.644.8534
E wschroe...@txfb-ins.com

7420 Fish Pond Rd.
Waco, TX 76710

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Mike Wood
Sent: Wednesday, July 17, 2013 4:17 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: RMM CDS utilization vs 3.4 utilization

Wayne, It is best to follow the recommendations in the DFSMSrmm Implementation 
 Customization Guide. They were written based on lots of experience with many 
different installation.
The CDS utilization is simply HURBA/HARBA * 100 It makes no account for empty 
space in CIs or CAs, nor for the potential to grow the CDS into multiple 
extents.

To determine really what space is actually used, you could define a VSAM KSDS 
like the CDS and repro the records from the CDS to the new KSDS and see what 
the HURBA/HARBA is then.

VSAM is now very good at reusing empty space within already used CAs and CIs 
(CAs with R12+).

Mike Wood   rmm expert

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN
[http://infonet.txfb-ins.com//images//email-signature-image.jpg]
WWW.TXFB-INS.COMhttp://www.txfb-ins.com

CONFIDENTIALITY STATEMENT: The foregoing message (including attachments) is 
covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 
2510-2521, and is CONFIDENTIAL. If you believe that it has been sent to you in 
error, do not read it. If you are not the intended recipient, you are hereby 
notified that any retention, dissemination, distribution, or copying of this 
communication is strictly prohibited. Please reply to the sender that you have 
received the message in error, then delete it. Thank you.

Texas Farm Bureau Insurance Companies received the highest numerical score 
among auto insurance providers in Texas in the proprietary J.D. Power 2013 U.S. 
Auto Insurance Study(SM). Study based on 45,521 total responses measuring 8 
providers in Texas and measures opinions of consumers with their auto insurance 
provider. Proprietary study results are based on experiences and perceptions of 
consumers surveyed March –April 2013. Your experiences may vary. Visit 
jdpower.com.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: RMM CDS utilization vs 3.4 utilization

[Schroeder, Wayne]

Thank you Radoslaw for your input. I appreciate you and the list!

Wayne Schroeder
MAINFRAME STORAGE ADMINISTRATOR

T  254.399.5070
M 254.644.8534
E wschroe...@txfb-ins.com

7420 Fish Pond Rd.
Waco, TX 76710

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of R.S.
Sent: Friday, July 12, 2013 11:07 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: RMM CDS utilization vs 3.4 utilization

W dniu 2013-07-12 17:36, Schroeder, Wayne pisze:
 Ladies and Gentlemen,
 My =3.4 reports my RMM CDS using 41910 tracks and 5 extents.
 My LISTCONTROL CNTL reports Utilization =  97%.

 What does this Utilization tell me?
 Should I expand the size of the CDS for a little breathing room or just size 
 the CDS with enough space for 0 extents and let it grow as it needs to?
 Is all of the Utilization really being used?

Utilization is ...utilization. That means your existing dataset is 97% full, 
but this dataset can grow up, assuming there is a space on dasd for new extents.
What should you do? Please note, that you have reached 100% ulitization at 
least four times before ...and sleep well.

Caution: what is the trend? Did you utilization look similar one week ago? One 
month ago? Or maybe your utilization grew up last 3 days?

--
Radoslaw Skorupka
Lodz, Poland






--
Tre tej wiadomoci moe zawiera informacje prawnie chronione Banku 
przeznaczone wycznie do uytku subowego adresata. Odbiorc moe by jedynie 
jej adresat z wyczeniem dostpu osób trzecich. Jeeli nie jeste adresatem 
niniejszej wiadomoci lub pracownikiem upowanionym do jej przekazania 
adresatowi, informujemy, e jej rozpowszechnianie, kopiowanie, rozprowadzanie 
lub inne dziaanie o podobnym charakterze jest prawnie zabronione i moe by 
karalne. Jeeli otrzymae t wiadomo omykowo, prosimy niezwocznie 
zawiadomi nadawc wysyajc odpowied oraz trwale usun t wiadomo 
wczajc w to wszelkie jej kopie wydrukowane lub zapisane na dysku.

This e-mail may contain legally privileged information of the Bank and is 
intended solely for business use of the addressee. This e-mail may only be 
received by the addressee and may not be disclosed to any third parties. If you 
are not the intended addressee of this e-mail or the employee authorised to 
forward it to the addressee, be advised that any dissemination, copying, 
distribution or any other similar activity is legally prohibited and may be 
punishable. If you received this e-mail by mistake please advise the sender 
immediately by using the reply facility in your e-mail software and delete 
permanently this e-mail including any copies of it either printed or saved to 
hard drive.

BRE Bank SA, 00-950 Warszawa, ul. Senatorska 18, tel. +48 (22) 829 00 00, fax 
+48 (22) 829 00 33, www.brebank.pl, e-mail: i...@brebank.pl
Sd Rejonowy dla m. st. Warszawy XII Wydzia Gospodarczy Krajowego Rejestru 
Sdowego, nr rejestru przedsibiorców KRS 025237, NIP: 526-021-50-88.
Wedug stanu na dzie 01.01.2013 r. kapita zakadowy BRE Banku SA (w caoci 
wpacony) wynosi 168.555.904 zotych.


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
[http://infonet.txfb-ins.com//images//email-signature-image.jpg]
WWW.TXFB-INS.COMhttp://www.txfb-ins.com

CONFIDENTIALITY STATEMENT: The foregoing message (including attachments) is 
covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 
2510-2521, and is CONFIDENTIAL. If you believe that it has been sent to you in 
error, do not read it. If you are not the intended recipient, you are hereby 
notified that any retention, dissemination, distribution, or copying of this 
communication is strictly prohibited. Please reply to the sender that you have 
received the message in error, then delete it. Thank you.

Texas Farm Bureau Insurance Companies received the highest numerical score 
among auto insurance providers in Texas in the proprietary J.D. Power 2013 U.S. 
Auto Insurance Study(SM). Study based on 45,521 total responses measuring 8 
providers in Texas and measures opinions of consumers with their auto insurance 
provider. Proprietary study results are based on experiences and perceptions of 
consumers surveyed March –April 2013. Your experiences may vary. Visit 
jdpower.com.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

RMM CDS utilization vs 3.4 utilization

[Schroeder, Wayne]

Ladies and Gentlemen,
My =3.4 reports my RMM CDS using 41910 tracks and 5 extents.
My LISTCONTROL CNTL reports Utilization =  97%.

What does this Utilization tell me?
Should I expand the size of the CDS for a little breathing room or just size 
the CDS with enough space for 0 extents and let it grow as it needs to?
Is all of the Utilization really being used?

Thank you for your thoughts and replies,

Wayne Schroeder
MAINFRAME STORAGE ADMINISTRATOR


[http://infonet.txfb-ins.com//images//email-signature-image.jpg]
WWW.TXFB-INS.COMhttp://www.txfb-ins.com

CONFIDENTIALITY STATEMENT: The foregoing message (including attachments) is 
covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 
2510-2521, and is CONFIDENTIAL. If you believe that it has been sent to you in 
error, do not read it. If you are not the intended recipient, you are hereby 
notified that any retention, dissemination, distribution, or copying of this 
communication is strictly prohibited. Please reply to the sender that you have 
received the message in error, then delete it. Thank you.

Texas Farm Bureau Insurance Companies received the highest numerical score 
among auto insurance providers in Texas in the proprietary J.D. Power 2013 U.S. 
Auto Insurance Study(SM). Study based on 45,521 total responses measuring 8 
providers in Texas and measures opinions of consumers with their auto insurance 
provider. Proprietary study results are based on experiences and perceptions of 
consumers surveyed March -April 2013. Your experiences may vary. Visit 
jdpower.com.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: DS8300 HMC WEBUI logon is forced closed

[Schroeder, Wayne]

I would like the fix also!

Thank you,

Wayne Schroeder
MAINFRAME STORAGE ADMINISTRATOR

T  254.399.5070
M 254.644.8534
E wschroe...@txfb-ins.com

7420 Fish Pond Rd.
Waco, TX 76710

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Doug Shape
Sent: Tuesday, January 22, 2013 6:00 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: DS8300 HMC WEBUI logon is forced closed

Thanks for the update!
IBM - We too would really like to have the fix at the 64.xx code level. My 2 
cents.
Regards, Doug

On Jan 22, 2013, at 4:39, David Devine david.dev...@sse.com wrote:

 Just to give an update.
 We have just started our annual l.m.c upgrade plan for our DS8300's and found 
 that the problem has been re-introduced with code bundle 64.36.63.0 L.M.C 
 5.4.36.140.
 So we had to go through the the port firewall enabling stuff again.
 
 Apparently the fix for the problem (CMVC 27500) will not be deployed on code 
 for R4 boxes (64.xx code) but will on more recent DS8xxx models, R5/6/7.
 
 regards,
 Dave
 
 
 
 
 
 --
 For IBM-MAIN subscribe / signoff / archive access instructions, send 
 email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN
 
WWW.TXFB-INS.COM

CONFIDENTIALITY STATEMENT: The foregoing message (including attachments) is 
covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 
2510-2521, and is CONFIDENTIAL. If you believe that it has been sent to you in 
error, do not read it. If you are not the intended recipient, you are hereby 
notified that any retention, dissemination, distribution, or copying of this 
communication is strictly prohibited. Please reply to the sender that you have 
received the message in error, then delete it. Thank you.

Texas Farm Bureau Insurance Companies received the highest score among auto 
insurance providers in the Central Region in the proprietary J.D. Power and 
Associates 2012 U.S. Auto Insurance Study(SM). Study based on 34,828 total 
responses measuring 14 providers in the Central Region (AR; IA; KS; MN; MO; NE; 
ND; OK; SD; TX) and measures opinions of consumers with their auto insurance 
provider. Proprietary study results are based on experiences and perceptions of 
consumers surveyed March - April 2012.  Your experiences may vary.  Visit 
JDPower.com..
 

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

DS8300 HMC WEBUI logon is forced closed

[Schroeder, Wayne]

Greetings,
I am trying to remotely connect to my DS8300 using the WEBUI and IE 9.0 and my 
session is being forced closed after 20 seconds. The message being displayed is:

Your session, logged on as user customer, was forcibly disconnected on Nov 12, 
2012 at 8:33:21 AM for the reason shown below:
Connectivity to the console failed. Contact your support personnel to determine 
if your browser is configured properly to connect to the console.

It's frustrating because I can remotely connect to my DS8100 but not my newly 
installed but used DS8300 (2424/932).

My question to the List is: To whom do I direct my problem to when I open an 
PMR? I can't find a reference to the DS8300 HMC software. I tried opening a 
Hardware Request but I was told that they could not help me and referred me 
back to my CE. I would like to open a Service Request but don't know who to 
direct the problem/question to.

Thank you for your patience.

Wayne Schroeder
MAINFRAME STORAGE ADMINISTRATOR

T  254.399.5070
M 254.644.8534
E wschroe...@txfb-ins.com

7420 Fish Pond Rd.
Waco, TX 76710





WWW.TXFB-INS.COM

CONFIDENTIALITY STATEMENT: The foregoing message (including attachments) is 
covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 
2510-2521, and is CONFIDENTIAL. If you believe that it has been sent to you in 
error, do not read it. If you are not the intended recipient, you are hereby 
notified that any retention, dissemination, distribution, or copying of this 
communication is strictly prohibited. Please reply to the sender that you have 
received the message in error, then delete it. Thank you.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: DS8300 HMC WEBUI logon is forced closed

[Schroeder, Wayne]

Thank you Dave, I knew somebody had seen this problem before!

Wayne Schroeder
MAINFRAME STORAGE ADMINISTRATOR

T  254.399.5070
M 254.644.8534
E wschroe...@txfb-ins.com

7420 Fish Pond Rd.
Waco, TX 76710




WWW.TXFB-INS.COM

CONFIDENTIALITY STATEMENT: The foregoing message (including attachments) is 
covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 
2510-2521, and is CONFIDENTIAL. If you believe that it has been sent to you in 
error, do not read it. If you are not the intended recipient, you are hereby 
notified that any retention, dissemination, distribution, or copying of this 
communication is strictly prohibited. Please reply to the sender that you have 
received the message in error, then delete it. Thank you.-Original 
Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of David Devine
Sent: Tuesday, November 13, 2012 9:59 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: DS8300 HMC WEBUI logon is forced closed

Hello,
I went through this a few weeks ago myself.
Problem appears to have come in with HMC V7R3.4.0.

A lot of faffing about trawling through ibm  some google's before i got to the 
answer which is down to the port firewall settings on the Ds8300 lan adaptor 
panel.

Ports in question are 443, 8443 and 9960.

Have a look at the Hardware Management console V7 Redbook which should give you 
some useful input.

I believe the specific port with the problem is 9960, but you do need all three 
firewall configured.

We don't have direct hmc access to the lan firewall settings on our boxes (only 
have the customer id) so had to raise calls with ibm for them to dial in and 
correct.
Each affected DS8xxx H.M.C needs to be rebooted after.

Once they did that, the problem's gone.

Good Luck!

Dave





--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: DS8300 HMC WEBUI logon is forced closed

[Schroeder, Wayne]

Hey Dave,
I guess I am going to have to go through IBM because my version 7.3.4.0.0 does 
not have the option of changing the Firewall settings. Who did you choose to 
ask about HMC questions?

Thank you,

Wayne Schroeder
MAINFRAME STORAGE ADMINISTRATOR

T 254.399.5070
M 254.644.8534
E wschroe...@txfb-ins.com

7420 Fish Pond Rd.
Waco, TX 76710

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Schroeder, Wayne
Sent: Tuesday, November 13, 2012 10:18 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: DS8300 HMC WEBUI logon is forced closed

Thank you Dave, I knew somebody had seen this problem before!

Wayne Schroeder
MAINFRAME STORAGE ADMINISTRATOR

T  254.399.5070
M 254.644.8534
E wschroe...@txfb-ins.com

7420 Fish Pond Rd.
Waco, TX 76710




WWW.TXFB-INS.COM

CONFIDENTIALITY STATEMENT: The foregoing message (including attachments) is 
covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 
2510-2521, and is CONFIDENTIAL. If you believe that it has been sent to you in 
error, do not read it. If you are not the intended recipient, you are hereby 
notified that any retention, dissemination, distribution, or copying of this 
communication is strictly prohibited. Please reply to the sender that you have 
received the message in error, then delete it. Thank you.-Original 
Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of David Devine
Sent: Tuesday, November 13, 2012 9:59 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: DS8300 HMC WEBUI logon is forced closed

Hello,
I went through this a few weeks ago myself.
Problem appears to have come in with HMC V7R3.4.0.

A lot of faffing about trawling through ibm  some google's before i got to the 
answer which is down to the port firewall settings on the Ds8300 lan adaptor 
panel.

Ports in question are 443, 8443 and 9960.

Have a look at the Hardware Management console V7 Redbook which should give you 
some useful input.

I believe the specific port with the problem is 9960, but you do need all three 
firewall configured.

We don't have direct hmc access to the lan firewall settings on our boxes (only 
have the customer id) so had to raise calls with ibm for them to dial in and 
correct.
Each affected DS8xxx H.M.C needs to be rebooted after.

Once they did that, the problem's gone.

Good Luck!

Dave





--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN