Re: Current market share breakdown for EACH of the three z/OS ESM products: RACF, CA-ACF2 and CA-Top Secret
Hi, Shane. I've seen and used Top Secret at government, military, and very large financial service organizations. No idea of the numbers, of course. Cheers,,,Steve Steven F. Conway AO-DTS- CTHO-HSD INFRASTRUCTURE (INFR) z/OS Systems Support Phone: 703-295-1926 Mobile: 304-995-7360 steve_con...@ao.uscourts.gov From: Shane GinnaneTo: IBM-MAIN@LISTSERV.UA.EDU Date: 09/09/2015 11:27 AM Subject:Re: Current market share breakdown for EACH of the three z/OS ESM products: RACF, CA-ACF2 and CA-Top Secret Sent by:IBM Mainframe Discussion List On Wed, 9 Sep 2015 08:47:27 -0500, Steve Harner wrote: >(a) When SKK was sold in 1986, ACF2 had a 60% market share while IBM?s RACF and CA?s Top Secret split the other 40%; and (b) Currently , RACF has 75% market share while ACF2 and Top Secret from CA share the other 25 percent. Does anyone, other than reputedly CA itself, actually use T/S ?. Never seen it in a customer site. When I first saw ACF2 (prior to the buyout), it was the ducks nuts - RACF was a slug in comparison. Seems IBM has won that battle though. Shane ... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SSLv3 connection to HMC Refused - Work Around
Sorry for the too quick post. Found it right after sending, of course. The obvious work around is to re-check Use SSL 3.0 in the Internet Options of IE. It works. Now I can poke away at moving to TLS. Cheers,,,Steve Steven F. Conway, CISSP AO-DTS- CTHO-HSD INFRASTRUCTURE (INFR) z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: Steve Conway steve_con...@ao.uscourts.gov To: IBM-MAIN@LISTSERV.UA.EDU Date: 05/07/2015 09:54 AM Subject:SSLv3 connection to HMC Refused Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU Morning, All. I work remotely full time. Normally, I log into the HMC daily to check the logs, ensure the scheduled calls to the mothership are successful, and so on. MF is a z9 BC. (Not my decision, obviously.) As of Tuesday, my attempts to connect to the HMC have failed, with both IE and Firefox. The error messages from IE just tell me to ensure TLS 1.0 / 1.1 / 1.2 are selected (they are). Firefox gives better error messages: Firefox cannot guarantee the safety of your data on IP addr because it uses SSLv3, a broken security protocol. The Learn More... link says that as of Firefox 34 the connections will be refused, and to go to TLS. Yes, POODLE vulnerability. So, the problem is evident. (Never mind that I believe it should have identified the problem and offered me the choice to go anyway, like it does with borked security certificates.) My question: Is there a setting in the HMC to switch from SSL to TLS encryption? If yes, are there other actions required to support this change? If not, does anyone have a work around? My life would be simpler if I can point my boss to the appropriate place, since I really don't want to have to drive into DC from WV to make the change. Cheers,,,Steve Steven F. Conway, CISSP AO-DTS- CTHO-HSD INFRASTRUCTURE (INFR) z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
SSLv3 connection to HMC Refused
Morning, All. I work remotely full time. Normally, I log into the HMC daily to check the logs, ensure the scheduled calls to the mothership are successful, and so on. MF is a z9 BC. (Not my decision, obviously.) As of Tuesday, my attempts to connect to the HMC have failed, with both IE and Firefox. The error messages from IE just tell me to ensure TLS 1.0 / 1.1 / 1.2 are selected (they are). Firefox gives better error messages: Firefox cannot guarantee the safety of your data on IP addr because it uses SSLv3, a broken security protocol. The Learn More... link says that as of Firefox 34 the connections will be refused, and to go to TLS. Yes, POODLE vulnerability. So, the problem is evident. (Never mind that I believe it should have identified the problem and offered me the choice to go anyway, like it does with borked security certificates.) My question: Is there a setting in the HMC to switch from SSL to TLS encryption? If yes, are there other actions required to support this change? If not, does anyone have a work around? My life would be simpler if I can point my boss to the appropriate place, since I really don't want to have to drive into DC from WV to make the change. Cheers,,,Steve Steven F. Conway, CISSP AO-DTS- CTHO-HSD INFRASTRUCTURE (INFR) z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: MVS
Freaking pedants. You all know the base is still MVS. I know it's a sport to some, but it would sure be nice if every damn thing didn't have to be argued and picked apart. Steven F. Conway, CISSP AO-DTS- CTHO-HSD INFRASTRUCTURE (INFR) z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: Shane Ginnane ibm-m...@tpg.com.au To: IBM-MAIN@LISTSERV.UA.EDU Date: 09/16/2014 09:43 AM Subject:MVS Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU On Tue, 16 Sep 2014 07:25:10 -0600, Paul Gilmartin wrote: Can't we forget MVS (that's *so* 20th Century), and talk instead about z/OS, which is the topic of the Redbook (see URL)? Nope. Up to, and including, the (new, you-beaut) 1.12 Info Centre, it was simply MVS for the important manuals. Now I see z/OS MVS - including 2.1. Some habits seem to die hard. Shane ... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Rational Development and Test (RDT) aka z/OS on a PC
Tom, that is fantastic news! I am surprised this has not been more publicized. Your offer to help other folks is characteristically generous. Careful there - you'll spoil your rep. Cheers,,,Steve Steven F. Conway, CISSP AO-DTS- CTHO-HSD INFRASTRUCTURE (INFR) z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: Pinnacle pinnc...@rochester.rr.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 08/06/2014 09:26 AM Subject:Rational Development and Test (RDT) aka z/OS on a PC Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU I've been remiss in not posting this sooner on IBM-Main. I recently purchased Rational Development Test (RDT) from IBM, a product which allows anyone to run z/OS on Intel hardware. That's right, anyone. You do not have to own any big iron. Any high-schooler, college kid, z/OS professional, etc. can order this product and run z/OS on a PC platform. For ordering details, go to this link: http://www-03.ibm.com/software/products/en/ratideveandtestenviforsystz There are two main pricing options, about 9K for the perpetual license with 15%/yr service renewal, or about 4K for a yearly fixed-term license. I chose the 9K option because I am definitely in this for the long haul. Before you start screaming That's too expensive, take a look at what it costs for a yearly Microsoft Developer Network (MSDN) subscription: http://www.visualstudio.com/products/how-to-buy-vs That's right folks, depending on your level of MSDN, z/OS is extremely competitive with MSDN from a price standpoint. You all know that I've never been shy about criticizing IBM when I disagree with them. I've been advocating for 15 years to create a Personal Use license for z/OS. Well folks, IBM came through for us, and they came through big time. RDT IS the z/OS Personal Use license. Anyone can now run z/OS in the comfort of their own home. I've been running z/OS V1R13 on my own PC at home now for about 4 months, and I couldn't be happier with it. For those of you saying, I can't afford it, my response would be how can you not?. This is our livelihood, our careers. The investment you make in RDT is an investment in your future. If you go through with the order, you will need to take one additional step that is not yet well-documented (IBM is fixing that). After purchasing RDT, you will have what's called a Passport Advantage account. You'll need to sign on to that and process an order for Physical Media. This will order the USB license key dongle necessary to run RDT on the zPDT emulator, and will also provide you a set of DVD's for the RDT install. You can also download the RDT software if you wish to begin installation immediately. The part number for the USB license key is: BA16UML. After ordering the physical media, you should have it within a day or two via 2-day air. Please let me know if you have any issues with ordering RDT, and I'll do what I can to assist. You will also need a reasonable PC, and a Linux distribution to run on it. I got an Asus system with an i7 (6 core) processor, 16GB memory, 10GB Ethernet, 2 1TB hard drives for about 1K. Be sure to turn off hiperthreading in the BIOS, as that can cause CPU loops. For the Linux distribution, I recommend OpenSUSE (http://www.opensuse.org/en/), which is now fully-supported by IBM, or you can go with a supported package like RedHat or Suse. I run the Gnome desktop, but you can choose KDE if you like. After installing Linux, you would then unload the z/OS volumes, install the RDT software (the zPDT emulation layer), enable your license key, and IPL. z/OS on your own home PC! I firmly believe that RDT is a game-changer. It addresses so many of the needs discussed here in the past, recapturing mind share, making z/OS prevalent, addressing the skills shortage in a truly meaningful way, and assuring the future of the z/OS platform well into the 21st century. I'll be posting more about RDT in the future. In the meantime, I'd recommend you go buy RDT, or start budgeting to buy RDT. Please let me know if you have any questions or concerns. Regards, Tom Conley -- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Beginners question about SHARE
Charles Mills said: I think the attacks are a good illustration of the it's OUR club -- you stay out of it attitude. Bullshit. The attacks were a response to inflammatory language. You got called on it. Deal. Steven F. Conway, CISSP AO-DTS- CTHO-HSD INFRASTRUCTURE (INFR) z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: CSV019I Clarification
Ancient Freaking History Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: Elardus Engelbrecht elardus.engelbre...@sita.co.za To: IBM-MAIN@LISTSERV.UA.EDU Date: 05/27/2014 02:03 PM Subject:Re: CSV019I Clarification Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU Bob Shannon wrote: This is AFH. Ok, Bob, I'm not a rocket scientist, but after searching and finding definitions of AFH, I still don't get it. Could you please be kind to tell us old braincell-challenged guys and gals what is 'AFH'? Thanks in advance. Groete / Greetings Elardus Engelbrecht No one of those helped me... http://www.abbreviations.com/AFH http://www.acronymfinder.com/AFH.html ... etc. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Relationship of Resolve to ServiceLink?
Looking at software renewals, and I was asked about several. This stumped me. I read the Getting Started Guide to Technical Support Services for IBM zSeries Software at http://www-935.ibm.com/services/us/its/pdf/swxcel.pdf. It is a whopping 2 paragraphs, and no detail. The description on IBM's web site under IBM Products and Services ( https://www-304.ibm.com/shop/americas/webapp/wcs/stores/servlet/default/CategoryDisplay?catalogId=-840storeId=1langId=-1dualCurrId=73categoryId=2364419go= ) is just as useful. If all I have is z/OS on my hardware, what does Resolve provide me that my ServiceLink money does not? Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Relationship of Resolve to ServiceLink?
Thanks, John. Found a SHARE presentation that shows Resolve is one of the Electronic Support offerings. I didn't even know that, having nothing to do with the contracts. Since I was asked the question without seeing the contract, guess I need to see what all we're actually paying for. Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: Chase, John jch...@ussco.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 04/25/2014 03:59 PM Subject:Re: Relationship of Resolve to ServiceLink? Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Steve Conway Sent: Friday, April 25, 2014 2:38 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Relationship of Resolve to ServiceLink? Looking at software renewals, and I was asked about several. This stumped me. I read the Getting Started Guide to Technical Support Services for IBM zSeries Software at http://www- 935.ibm.com/services/us/its/pdf/swxcel.pdf. It is a whopping 2 paragraphs, and no detail. The description on IBM's web site under IBM Products and Services ( https://www- 304.ibm.com/shop/americas/webapp/wcs/stores/servlet/default/CategoryDisplay?catalogId=- 840storeId=1langId=-1dualCurrId=73categoryId=2364419go= ) is just as useful. If all I have is z/OS on my hardware, what does Resolve provide me that my ServiceLink money does not? IIRC, Resolve includes what used to be known as TechQA while Servicelink does not. -jc- Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ** Information contained in this e-mail message and in any attachments thereto is confidential. If you are not the intended recipient, please destroy this message, delete any copies held on your systems, notify the sender immediately, and refrain from using or disclosing all or any part of its content to any other person. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Reflexivity (was: NJE Clarifications)
Paul Gilmartin said: Someone else suggested that with a /*ROUTE command it could be done. But: o Regardless how simple, this is modifying the JCL, probably making it ineligible to run on other systems until it's changed back o Does this work by routing the job to an (arbitrarily chosen) remote host which sends it back? Ugh! That was me, and I'm not understanding your problem. Your first bullet: /*ROUTE XEQ name/nodename vs. an IP address. If you want to run on different systems, you have to modify -something-. Unless you want to run on the system you submitted from. Then you specify /*ROUTE XEQ LOCAL, and it works from wherever you are. Your second bullet: Nothing like imagining something, and shuddering in horror at the imagined sins. Which don't exist, in this case. What am I missing in your stated requirements? Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Reflexivity (was: NJE Clarifications)
You can use /*ROUTE to route execution and/or SYSOUT to the local system, as well as remote systems. See Chapter 27 of the JCL Reference. I believe this meets your stated requirement of no extra setup, a simple JCL change to test, and so on. Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: Paul Gilmartin paulgboul...@aim.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 03/24/2014 08:11 AM Subject:Re: Reflexivity (was: NJE Clarifications) Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU On Sun, 23 Mar 2014 20:12:49 -0400, Shmuel Metz (Seymour J.) wrote: I''m not asking a question; I'm pointing out a false analogy. TCP/IP, in contrast, is blessedly tolerant. makes no sense. ... I'm asking in what sense TCP/IP is more tolerant than SNA. It's certainly not in the ability to run multiple applications on the same host, since SNA does that as well as TCP/IP does. I can use FTP (a TCP/IP protocol) to submit jobs to localhost. I do not need multiple TCP/IP stacks to do this; only a conventional TCP/IP configuration. Generally, TCP/IP-based protocols such as FTP, HTTP, SSH, ... can communicate with localhost with no special configuration. The discussion here indicates that to use NJE to submit jobs or otherwise communicate with the local host requires some unusual configuration such as multiple instances of JES or multiple instances of NJE. So, I perceive TCP/IP as more tolerant; it has no bias against the local host. -- gil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
OPS/MVS Command to Stop IDMS?
Morning, All. Does anybody have a command to shut down IDMS regions by responding to their WTORs they are willing to share? I'm kinda pressed for time, and don't have a test region to test rules on, giving me one shot per night; it's not going quickly enough to keep everyone happy. Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: OPS/MVS Command to Stop IDMS?
Thanks, John. I'll play with this and try to adjust it to IDMS. Thank you very much. Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: John McKown john.archie.mck...@gmail.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 03/07/2014 08:00 AM Subject:Re: OPS/MVS Command to Stop IDMS? Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU We don't have IDMS. But we do have some other products with hang a WTOR that needs to be replied to in order to shut them down (IMO, poor architecture!). We use CA-OPS/MVS. What we do is look at each outstanding WTOR and look for the proper MSGID to which to reply. The code looks something like: temp = OPSTATUS(R,S,*) /* scan all WTORs */ DO WHILE QUEUED() 0 PARSE PULL WTOR PARSE PULL LINE2 FROMSYS=WORD(LINE2,4) /* Check that the message is from this z/OS system */ IF FROMSYSOPSINFO(SYSNAME) THEN ITERATE PARSE VAR WTOR REPLYNO MSGID . IF MSGID = 'CA-7.574' THEN DO ADDRESS OPER , R REPLYNO,STOP END END END Hopefully this will be of some help, should no one else have an an exact IDMS rule available. On Fri, Mar 7, 2014 at 6:45 AM, Steve Conway steve_con...@ao.uscourts.govwrote: Morning, All. Does anybody have a command to shut down IDMS regions by responding to their WTORs they are willing to share? I'm kinda pressed for time, and don't have a test region to test rules on, giving me one shot per night; it's not going quickly enough to keep everyone happy. Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- Wasn't there something about a PASCAL programmer knowing the value of everything and the Wirth of nothing? Maranatha! John McKown -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: OPS/MVS Command to Stop IDMS?
Thank you Chuck. This has good possibilities. Your JCL has an interesting program name - is there not a standard utility name? While I'm on this track, can the SHUTDOWN IMMED command be issued directly against a known IDMS region name, via console command? Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: Hardee, Chuck chuck.har...@thermofisher.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 03/07/2014 08:08 AM Subject:Re: OPS/MVS Command to Stop IDMS? Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU Why not simply submit a UCF/Batch job with a DCMT SHUTDOWN or DCMT SHUTDOWN IMMEDIATE? Remember, the SHUTDOWN command will prompt for confirmation so you need to have a Y coded following the DCMT command. //UCFBATCH EXEC PGM=whateveryoucallit //STEPLIB DD DISP=SHR,DSN=your.idms.loadlib // DD DISP=SHR,DSN=any.other.loadlib //SYSCTLDD DISP=SHR,DSN=your.cv.sysctl.dataset.name //SYSIPTDD * DCMT SHUTDOWN Y /* //SYSLST DD SYSOUT=* The above should get you started. Once you have the job working, you should be able to use your scheduler to submit the job at the appropriate shutdown time of day, or condition, etc. Good Luck. Charles (Chuck) Hardee Senior Systems Engineer/Database Administration CCG Information Technology Thermo Fisher Scientific 300 Industry Drive Pittsburgh, PA 15275 Direct: 724-517-2633 FAX: 412-490-9230 chuck.har...@thermofisher.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John McKown Sent: Friday, March 07, 2014 8:00 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: OPS/MVS Command to Stop IDMS? We don't have IDMS. But we do have some other products with hang a WTOR that needs to be replied to in order to shut them down (IMO, poor architecture!). We use CA-OPS/MVS. What we do is look at each outstanding WTOR and look for the proper MSGID to which to reply. The code looks something like: temp = OPSTATUS(R,S,*) /* scan all WTORs */ DO WHILE QUEUED() 0 PARSE PULL WTOR PARSE PULL LINE2 FROMSYS=WORD(LINE2,4) /* Check that the message is from this z/OS system */ IF FROMSYSOPSINFO(SYSNAME) THEN ITERATE PARSE VAR WTOR REPLYNO MSGID . IF MSGID = 'CA-7.574' THEN DO ADDRESS OPER , R REPLYNO,STOP END END END Hopefully this will be of some help, should no one else have an an exact IDMS rule available. On Fri, Mar 7, 2014 at 6:45 AM, Steve Conway steve_con...@ao.uscourts.govwrote: Morning, All. Does anybody have a command to shut down IDMS regions by responding to their WTORs they are willing to share? I'm kinda pressed for time, and don't have a test region to test rules on, giving me one shot per night; it's not going quickly enough to keep everyone happy. Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- Wasn't there something about a PASCAL programmer knowing the value of everything and the Wirth of nothing? Maranatha! John McKown -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: OPS/MVS Command to Stop IDMS?
Thanks, Chuck. I was trying to avoid the WTOR (as that's the part I'm screwing up in my execs), and go with an MVS console command, since I know how to do that. Thanks for the heads up on the implicit signon. I'll need to verify if our OPS/MVS IDs have sigon auth to IDMS. Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: Hardee, Chuck chuck.har...@thermofisher.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 03/07/2014 08:31 AM Subject:Re: OPS/MVS Command to Stop IDMS? Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU Yes, you can issue the SHUTDOWN or SHUTDOWN IMMEDIATE directly to the outstanding console reply or thru the UCF/Batch interface or from a VTAM terminal, basically, anywhere you can talk to IDMS interactively you can issue the command. The UCF/Batch interface program name has a standard one that is created at installation time, but it was modified here long before I arrived so I simply propagated it forward since there is numerous job streams that execute the program under the name that was created long ago. One thing to keep in mind, you notice that there is no signon statement in the input stream. An implicit signon is performed using the user id executing the job. So, if you secure DCMT and/or the SHUTDOWN function in your configuration, be sure to execute the job with a userid that has the authority to 1) execute DCMT and 2) issue the SHUTDOWN command. Hope this helps. Charles (Chuck) Hardee Senior Systems Engineer/Database Administration CCG Information Technology Thermo Fisher Scientific 300 Industry Drive Pittsburgh, PA 15275 Direct: 724-517-2633 FAX: 412-490-9230 chuck.har...@thermofisher.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Steve Conway Sent: Friday, March 07, 2014 8:26 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: OPS/MVS Command to Stop IDMS? Thank you Chuck. This has good possibilities. Your JCL has an interesting program name - is there not a standard utility name? While I'm on this track, can the SHUTDOWN IMMED command be issued directly against a known IDMS region name, via console command? Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: Hardee, Chuck chuck.har...@thermofisher.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 03/07/2014 08:08 AM Subject:Re: OPS/MVS Command to Stop IDMS? Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU Why not simply submit a UCF/Batch job with a DCMT SHUTDOWN or DCMT SHUTDOWN IMMEDIATE? Remember, the SHUTDOWN command will prompt for confirmation so you need to have a Y coded following the DCMT command. //UCFBATCH EXEC PGM=whateveryoucallit //STEPLIB DD DISP=SHR,DSN=your.idms.loadlib // DD DISP=SHR,DSN=any.other.loadlib //SYSCTLDD DISP=SHR,DSN=your.cv.sysctl.dataset.name //SYSIPTDD * DCMT SHUTDOWN Y /* //SYSLST DD SYSOUT=* The above should get you started. Once you have the job working, you should be able to use your scheduler to submit the job at the appropriate shutdown time of day, or condition, etc. Good Luck. Charles (Chuck) Hardee Senior Systems Engineer/Database Administration CCG Information Technology Thermo Fisher Scientific 300 Industry Drive Pittsburgh, PA 15275 Direct: 724-517-2633 FAX: 412-490-9230 chuck.har...@thermofisher.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John McKown Sent: Friday, March 07, 2014 8:00 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: OPS/MVS Command to Stop IDMS? We don't have IDMS. But we do have some other products with hang a WTOR that needs to be replied to in order to shut them down (IMO, poor architecture!). We use CA-OPS/MVS. What we do is look at each outstanding WTOR and look for the proper MSGID to which to reply. The code looks something like: temp = OPSTATUS(R,S,*) /* scan all WTORs */ DO WHILE QUEUED() 0 PARSE PULL WTOR PARSE PULL LINE2 FROMSYS=WORD(LINE2,4) /* Check that the message is from this z/OS system */ IF FROMSYSOPSINFO(SYSNAME) THEN ITERATE PARSE VAR WTOR REPLYNO MSGID . IF MSGID = 'CA-7.574' THEN DO ADDRESS OPER , R REPLYNO,STOP END END END Hopefully this will be of some help, should no one else have an an exact IDMS rule available. On Fri, Mar 7, 2014 at 6:45 AM, Steve Conway steve_con...@ao.uscourts.govwrote: Morning, All. Does anybody have a command to shut down IDMS regions by responding to their WTORs they are willing to share? I'm kinda pressed for time, and don't have a test
Re: OPS/MVS Command to Stop IDMS?
Hi, Elardus, AUTORxx doesn't give me an option for a timed response, on specific days, etc. I don't specifically want to avoid this, it just doesn't have the flexibility I need. Creative thinking, though. Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: Elardus Engelbrecht elardus.engelbre...@sita.co.za To: IBM-MAIN@LISTSERV.UA.EDU Date: 03/07/2014 08:50 AM Subject:Re: OPS/MVS Command to Stop IDMS? Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU Steve Conway wrote: I was trying to avoid the WTOR (as that's the part I'm screwing up in my execs), and go with an MVS console command, since I know how to do that. What about AUTORxx in the SYS1.PARMLIB? Or do you also want to avoid that? Groete / Greetings Elardus Engelbrecht -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: OPS/MVS Command to Stop IDMS?
Agreed, Elardus. Actually the flexibility is in the OPS/MVS rule that invokes the REXX (or the batch job, or the console command...) Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: Elardus Engelbrecht elardus.engelbre...@sita.co.za To: IBM-MAIN@LISTSERV.UA.EDU Date: 03/07/2014 09:02 AM Subject:Re: OPS/MVS Command to Stop IDMS? Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU Steve Conway wrote: AUTORxx doesn't give me an option for a timed response, on specific days, etc. I don't specifically want to avoid this, it just doesn't have the flexibility I need. Ok. Understood. I think you could use that REXX sample to 'plug in' your flexibility needs. ;-) Groete / Greetings Elardus Engelbrecht -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: OPS/MVS Command to Stop IDMS?
Thanks, David. I love it when people who have clue recognize cluelessness (mine) and try to keep me from shooting myself in the foot. :-) Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: David Andrews d...@lists.duda.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 03/07/2014 09:08 AM Subject:Re: OPS/MVS Command to Stop IDMS? Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU On Fri, 2014-03-07 at 08:31 -0500, Hardee, Chuck wrote: One thing to keep in mind, you notice that there is no signon statement in the input stream. An implicit signon is performed using the user id executing the job. If your CV SYSGEN specifies MULTIPLE SIGNONS IS NO then two simultaneous UCFBATCH jobs will make a mess. You'll have to find a way to serialize those. -- David Andrews A. Duda Sons, Inc. david.andr...@duda.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: OPS/MVS Command to Stop IDMS?
Hi, Lizette. I appreciate the link for the OPS/MVS list. I will be subscribing. I agree, the OPS/MVS crew has been very supportive. I try not to pester them for local coding stuff if I can avoid it. I don't want to be that guy, where everyone on the support team groans when they see my name on a PMR, you know? So, I asked here first. If I had a test region to play with, I would not have even done this; I'd have hacked away until I got what I needed. But, management wants this NOW... I have the rules in place for the timing. It is done in a STATMGR rule. The logic for when I want to bring down the three IDMS regions is solid. The command is being issued at the right time to invoke a REXX exec. It's the REXX exec that's crap. The problem I have is how to actually get them down, and folks have provided several options for me. The two most promising are the batch job and the REXX execs. I know the region names, but would prefer to not have to specify them, so looping through the WTORs and responding to the IDMS ones is the way to go. You mentioned the SSM table. I had not considered that. (I'm sure everyone will be shocked to hear that I'm not real comfy in this product.) If someone has a spiffy way for me to tell SSM to change the desired state to DOWN, that would work for me also. In short, the scheduling is not the problem. I'm already doing something at the right time. Just not doing the right thing. :-) Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: Lizette Koehler stars...@mindspring.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 03/07/2014 09:20 AM Subject:Re: OPS/MVS Command to Stop IDMS? Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU Steve, There is a List for OPS/MVS it can be joined by sending an email to automat...@listserv.protechtraining.com Or send an email to Bob Stark to find out how to joinBob Stark bst...@protechpts.com Second, the support team at CA OPS/MVS has always provided excellent assistance whenever I had a need to craft an OPS/MVS process to handle an event. In fact they may already have such a process written that you could get. There is also a group on the MYCA Community that could also provide assistance. If you could provide your process. There are timer rules that could be used to control, date, time of shutdown etc. You can put events in the STC Action table to do the shutdown. Many avenues. Can you provide a little more detail on the process. For example, if prior to an IPL you need to have IDMS Shutdown one hour in advanced, Or when it is 10pm Wed we need to shutdown IDMS. Understanding your requirements will make it easier to provide a more targeted answer. Lizette -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Steve Conway Sent: Friday, March 07, 2014 5:46 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: OPS/MVS Command to Stop IDMS? Morning, All. Does anybody have a command to shut down IDMS regions by responding to their WTORs they are willing to share? I'm kinda pressed for time, and don't have a test region to test rules on, giving me one shot per night; it's not going quickly enough to keep everyone happy. Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO- HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: OPS/MVS Command to Stop IDMS?
Hi, Chris. Thanks for the offer - I happily accept. :-) Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: Chris Hoelscher choelsc...@humana.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 03/07/2014 10:51 AM Subject:Re: OPS/MVS Command to Stop IDMS? Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU First - let me suggest that this inquiry might be better directed to the CA COMMUNITIES user forum (the successor to the LATE GREAT IDMS-L) - you might get different approaches there Having said that, I have code (from another site who graciously gave to me) that suppresses the WTOR and allows MVS OPERATOR commands to manipulate the CV ... I will be happy to send it (after I remove my name to protect the innocent?) I think I tested the code (successfully) but never implanted it ... Chris hoelscher Technology Architect | Database Infrastructure Services Technology Solution Services 123 East Main Street |Louisville, KY 40202 choelsc...@humana.com Humana.com (502) 476-2538 ? office (502) 714-8615 - blackberry Keeping CAS and Metavance safe for all HUMANAty -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Hardee, Chuck Sent: Friday, March 07, 2014 8:08 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: [IBM-MAIN] OPS/MVS Command to Stop IDMS? Why not simply submit a UCF/Batch job with a DCMT SHUTDOWN or DCMT SHUTDOWN IMMEDIATE? Remember, the SHUTDOWN command will prompt for confirmation so you need to have a Y coded following the DCMT command. //UCFBATCH EXEC PGM=whateveryoucallit //STEPLIB DD DISP=SHR,DSN=your.idms.loadlib // DD DISP=SHR,DSN=any.other.loadlib //SYSCTLDD DISP=SHR,DSN=your.cv.sysctl.dataset.name //SYSIPTDD * DCMT SHUTDOWN Y /* //SYSLST DD SYSOUT=* The above should get you started. Once you have the job working, you should be able to use your scheduler to submit the job at the appropriate shutdown time of day, or condition, etc. Good Luck. Charles (Chuck) Hardee Senior Systems Engineer/Database Administration CCG Information Technology Thermo Fisher Scientific 300 Industry Drive Pittsburgh, PA 15275 Direct: 724-517-2633 FAX: 412-490-9230 chuck.har...@thermofisher.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John McKown Sent: Friday, March 07, 2014 8:00 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: OPS/MVS Command to Stop IDMS? We don't have IDMS. But we do have some other products with hang a WTOR that needs to be replied to in order to shut them down (IMO, poor architecture!). We use CA-OPS/MVS. What we do is look at each outstanding WTOR and look for the proper MSGID to which to reply. The code looks something like: temp = OPSTATUS(R,S,*) /* scan all WTORs */ DO WHILE QUEUED() 0 PARSE PULL WTOR PARSE PULL LINE2 FROMSYS=WORD(LINE2,4) /* Check that the message is from this z/OS system */ IF FROMSYSOPSINFO(SYSNAME) THEN ITERATE PARSE VAR WTOR REPLYNO MSGID . IF MSGID = 'CA-7.574' THEN DO ADDRESS OPER , R REPLYNO,STOP END END END Hopefully this will be of some help, should no one else have an an exact IDMS rule available. On Fri, Mar 7, 2014 at 6:45 AM, Steve Conway steve_con...@ao.uscourts.govwrote: Morning, All. Does anybody have a command to shut down IDMS regions by responding to their WTORs they are willing to share? I'm kinda pressed for time, and don't have a test region to test rules on, giving me one shot per night; it's not going quickly enough to keep everyone happy. Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- Wasn't there something about a PASCAL programmer knowing the value of everything and the Wirth of nothing? Maranatha! John McKown -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please
Re: OPS/MVS Command to Stop IDMS?
Hi, Rob. This: Also OPS/MVS supports translating FMODIFYs to R,xx responses. Thanks for the hint. If the REXX exec I scarfed earlier doesn't do the trick, I will research this. Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov From: Klan, Rob (RET-DAY) rob.k...@reedelsevier.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 03/07/2014 11:11 AM Subject:Re: OPS/MVS Command to Stop IDMS? Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU Hi Steve I didn?t read all the replies, maybe below discussed. Via an exit IDMS accepts console commands. This exit can also be coded to accept FMODIFY commands rather than post a replid. . Also OPS/MVS supports translating FMODIFYs to R,xx responses. Now you don't need to concern yourself with knowing the reply number. Rob -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John McKown Sent: Friday, March 07, 2014 8:00 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: OPS/MVS Command to Stop IDMS? We don't have IDMS. But we do have some other products with hang a WTOR that needs to be replied to in order to shut them down (IMO, poor architecture!). We use CA-OPS/MVS. What we do is look at each outstanding WTOR and look for the proper MSGID to which to reply. The code looks something like: temp = OPSTATUS(R,S,*) /* scan all WTORs */ DO WHILE QUEUED() 0 PARSE PULL WTOR PARSE PULL LINE2 FROMSYS=WORD(LINE2,4) /* Check that the message is from this z/OS system */ IF FROMSYSOPSINFO(SYSNAME) THEN ITERATE PARSE VAR WTOR REPLYNO MSGID . IF MSGID = 'CA-7.574' THEN DO ADDRESS OPER , R REPLYNO,STOP END END END Hopefully this will be of some help, should no one else have an an exact IDMS rule available. On Fri, Mar 7, 2014 at 6:45 AM, Steve Conway steve_con...@ao.uscourts.govwrote: Morning, All. Does anybody have a command to shut down IDMS regions by responding to their WTORs they are willing to share? I'm kinda pressed for time, and don't have a test region to test rules on, giving me one shot per night; it's not going quickly enough to keep everyone happy. Cheers,,,Steve Steven F. Conway, CISSP Hosting Services Division, Cloud Technology and Hosting Office, AO-DTS-CTHO-HSD z/OS Systems Support Phone: 703-295-1926 Mobile: 703-402-2650 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- Wasn't there something about a PASCAL programmer knowing the value of everything and the Wirth of nothing? Maranatha! John McKown -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Utilization of Crypto CPU
RMF provides a Crypto Hardware Activity report. I'm too lazy to look up the specific option right now, but REPORTS(ALL) should give it to you. Here's our options: OPTIONS IN EFFECT SYSOUT(A) -- SYSIN NOEXITS -- SYSIN NODELTA -- SYSIN SUMMARY(TOT) -- SYSIN SUMMARY(INT) -- SYSIN REPORTS(ALL) -- SYSIN OVERVIEW(REPORT) -- SYSIN STOD(,2400) -- SYSIN RTOD(,2400) -- SYSIN ETOD(,2400) -- SYSIN DINTV(0400) -- SYSIN Here's the report: C R Y P T O H A R D W A R E A C T I V I T Y z/OS V1R13 SYSTEM ID PROD START 01/27/2014-20.00.00 INTERVAL 003.59.59 RPT VERSION V1R13 RMF END 01/28/2014-00.00.00 CYCLE 1.000 SECONDS CRYPTOGRAPHIC CCA COPROCESSOR TOTAL KEY-GEN TYPE ID RATE EXEC TIME UTIL%RATE CEX2C 0 0.010.327 0.0 0.00 1 0.000.000 0.0 0.00 2 0.000.000 0.0 0.00 3 0.000.000 0.0 0.00 ICSF SERVICES ENCRYPTION - DECRYPTION -- MAC -- HASH --- PIN --- SDESTDES AES SDESTDES AESGENERATE VERIFY SHA-1 SHA-256 SHA-512TRANSLATE VERIFY RATE 0.000.000.00 0.000.000.000.000.00 0.00 0.00 0.00 0.00 0.00 SIZE 0.000.000.00 0.000.000.000.000.00 0.00 0.00 0.00 ** Bottom of Data * Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: Elardus Engelbrecht elardus.engelbre...@sita.co.za To: IBM-MAIN@LISTSERV.UA.EDU Date: 01/28/2014 08:31 AM Subject:Utilization of Crypto CPU Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU Good day Where can I see how much the Crypto CPU is used? This is for CP Assist for Cryptographic Function (Feature 3863) on a zEC12. Is it possible to see usage per LPAR or per footprint? Can I see how much data are transferred to/from that CPU? Oh, BTW, we can do a TCP/IP packet trace to see the increased bandwith of a single SSL connection and compare that with a single Non-SSL connection. TIA! Groete / Greetings Elardus Engelbrecht -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Utilization of Crypto CPU
Elardus, in at least one of the shops I worked, the RMF records were split off into a separate GDG for easier file management. Is that the case in your house? Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: Elardus Engelbrecht elardus.engelbre...@sita.co.za To: IBM-MAIN@LISTSERV.UA.EDU Date: 01/28/2014 08:57 AM Subject:Re: Utilization of Crypto CPU Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU Rob Schramm wrote: Are you just after cex processor or cpacf as well? Only CPACF. Steve Conway wrote: I'm too lazy to look up the specific option right now, but REPORTS(ALL) Thanks. But REPORTS(CRYPTO) showed up empty. I must have missed something. I'm sure we're collecting SMF records 70-2. Groete / Greetings Elardus Engelbrecht -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Scary Sysprogs
Hi, Ron, The only thing I wish we would teach newbies in any field of mainframe is Do Nothing should always be in the list of options. I wish we could teach (some of) management that, as well. Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: Ron Hawkins ronjhawk...@sbcglobal.net To: IBM-MAIN@LISTSERV.UA.EDU Date: 01/07/2014 05:24 AM Subject:Re: Scary Sysprogs Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU All, My history with z/OS is more about performance and tuning, rather than hardcore sysprogging. Tuning is almost always about doing it a new way, and I only wish there were more newbies in this field with no preconceived ideas about how it has always worked. Back when I was not Mr Congeniality a stand up argument with a Sysprog about how to resolve a performance problem was almost a monthly occasion at any site. The only thing I wish we would teach newbies in any field of mainframe is Do Nothing should always be in the list of options. Ron -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Miklos Szigetvari Sent: Tuesday, January 07, 2014 1:32 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: [IBM-MAIN] Scary Sysprogs Nathan (and maybe any other youngster) I think if you have some problem, you will get every support from this newsgroup list , and if you need, personally from me also. Glad to see young people here. On 06.01.2014 19:44, Nathan J Pfister wrote: Harry has a good point. I am a 26 year old in the mainframe world, and came into an internship with the US DoD while in my Junior Year of college. I have seen, from the younger generation view that he pointed out, a fair amount of the dismissive and condescending attitudes in some of the seniors that I have worked with. That being said, there are also quite a few seniors that I have had the fortune of working with that have had quite the opposite affect on me personally, and they are the reason that I have, for a bit more than 5 years now stuck with a career working with z/OS. Maybe I am among the outliers in the research study alluded to, but I feel that all fields have a fair amount of people in both positions: those willing to share and listen, and those that are still trying to live the glory days of old being very quick to dismiss any new ideas...so I'm not sure that that is unique to the demographics of the z/OS Systems Programmer groups. That said, maybe I was just fortunate that I found my internship and first post-college job within the Federal Government in which it is nearly impossible to get fired, thus making change and new ideas/people not as much of a threat as in private industry. Thanks; Nathan Pfister zOS Systems Programmer AES\PHEAA - Tech Services From: Harry Wahl harry_w...@hotmail.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 01/06/2014 01:34 PM Subject:Scary Sysprogs; was: Is the oner of IBM-Main still with us? Sent by:IBM Mainframe Discussion List IBM- m...@listserv.ua.edu Interesting segue this thread has taken... I recently attended an IBM meeting which addressed why young people are eschewing an IBM z/OS mainframe career in favor of other platforms, including other IBM platforms. This seems to be a very serious concern at IBM and possibly the greatest threat to the future of z/OS. The speaker was a woman from IBM who had been tasked by IBM management to study this. She presented selected conclusions from her assignment. Some results were what one would expect, many results were unexpected or at least not typically considered in the context of z/OS's continued viability. One of the top reasons graduating students from the best universities will not accept a position working on z/OS is how they feel they are (or will be) treated by z/OS old-timers, particularly systems programmers. This conclusion is supported by other data indicating that students who co-op'ed or interned in z/OS positions are far more likely to reject z/OS as a career as opposed to those graduates who have no experience with the z/OS environment (technically and socially). The prevailing conjecture for this phenomena is the relatively advanced age of z/OS people. There seems to be a phase in one's life and career where there is a natural desire to mentor young people. It is a time when young people are not your competition (you have accepted that you are no longer one of them) and you are aware of the knowledge and insights your work experiences have imbued you with and wish to express and share them with someone who can both appreciate and benefit from them. This phase eventually passes...obviously. The average age of z/OS people is far beyond the average age of other
Re: FRR Recovery Routine Environment
+1 Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: Shane Ginnane ibm-m...@tpg.com.au To: IBM-MAIN@LISTSERV.UA.EDU Date: 10/03/2013 08:59 AM Subject:Re: FRR Recovery Routine Environment Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU On Thu, 3 Oct 2013 07:44:04 -0500, Kenneth Wilkerson wrote: Your point is well taken. I should refrain from expressing opinions in this forum. You should not. Best I can recall (without checking) you've always claimed your opinions as your own. No harm, no foul. Provoking informed responses from the other luminaries on the list is IMHO acceptable sport. Makes for more enthralling reading for the dispassionate observers as well. Shane ... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Interested in up to date open source software or low cost utilities?
David said, To me it's a no-brainer but convincing mainframers to step outside of their comfort zone is difficult. I have to disagree, partly, with that. In the course of my career, I have been forced repeatedly to learn spiffy new things. As I started working the mainframe in 1977, it's easy to grasp the magnitude of changes so many of us have successfully learned and integrated into our daily routines. The key here is risk management. Lizette made the point very well the seriousness of a mainframe outage. An outage traced to non-approved software in production is very likely a career ending event for the people involved, and possibly their managers. Then take into account the business impact. It's not that we don't want to play with the shiny new toys. Living in cardboard boxes is just so unappealing. Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: PDS/E, Shared Dasd, and COBOL V5
While Gerhard's suggestion of an exit has the merit of being (probably) easier to get IBM to implement, I much prefer Ed's suggestion of a PARMLIB member. That is much easier to review, implement and maintain down here in the trenches. Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: Gerhard Postpischil gerh...@valley.net To: IBM-MAIN@LISTSERV.UA.EDU Date: 09/16/2013 03:07 AM Subject:Re: PDS/E, Shared Dasd, and COBOL V5 Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU On 9/16/2013 2:19 AM, Ed Jaffe wrote: At least this would do away with the need for every developer to roll his/her own solution. While NIP processing has changed a bit since OS/360, there always has been a LINK to IEEVIPL. We've hijacked that to initialize local security (pre-RACF) and accounting code, ensure correct volume attributes (for packs not in VATLST), and other shenanigans. Perhaps IBM could be persuaded to add a formal link (or ATTACH) to a user exit - at this point most services are available. Gerhard Postpischil Bradford, Vermont -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: PDS/E, Shared Dasd, and COBOL V5
Hi, Gerhard, Limited use is exactly what is under discussion, based on the original point of LPA not allowing PDSE data sets All the PARMLIB member needs to do is provide a list of PDSE datasets to be loaded into LPA. If you want to do more than that, sure, an exit is ideal. This is more like an extension to LPALSTxx, and I'm confident you wouldn't advocate an exit to replace that PARMLIB member, would you? Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: Gerhard Postpischil gerh...@valley.net To: IBM-MAIN@LISTSERV.UA.EDU Date: 09/16/2013 01:18 PM Subject:Re: PDS/E, Shared Dasd, and COBOL V5 Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU On 9/16/2013 10:11 AM, Steve Conway wrote: While Gerhard's suggestion of an exit has the merit of being (probably) easier to get IBM to implement, I much prefer Ed's suggestion of a PARMLIB member. That is much easier to review, implement and maintain down here in the trenches. Unless the PARMLIB member provides for an exit name, it would be of limited use. I see PARMLIB as the equivalent of reading a book - it may be interesting, but the capabilities are limited to what the author provides. An exit is closer to writing your own book, where (almost) anything goes. Gerhard Postpischil Bradford, Vermont -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: TSO Delete in IKJTSOxx
Barbara, keep in mind that the SAMPLIB IKJTSO reflects a vanilla system. Any Program Products may instruct you to update IKJTSO. CA ENF, zSecure, OPS/MVS, all have a place in mine. Along with remnants from the past that I hesitate to delete. :-) Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: nitz-...@gmx.net nitz-...@gmx.net To: IBM-MAIN@LISTSERV.UA.EDU Date: 09/12/2013 09:21 AM Subject:Re: TSO Delete in IKJTSOxx Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU I've run into this in the past when deleting GDG bases from ISPF 3.4. I get an authorization failed message, and putting DELETE in IKJTSO00 and a PARMLIB UPDATE(00) fixes it. Interesting. This is new for me or I forgot about it. :-) I found this interesting, too, so I went and tried it out. Discovered first that the active IKJTSO member is not compliant with the one in samplib (typical for ADCD!), and that we had delete in it, too. Removed delete from the authcmds and still didn't get any error messages, RACF or otherwise when I deleted an empty GDG base. Could you be kind to say what that message was? Was it a RACF message on the profile covering the GDG, Catalog or was it about STGADMIN.IGG.DELGDG.RECOVERY? Or something else? Yes, that would be interesting, since I gave myself ALTER authority to just about everything since I am supposed to be both RACF and space admin. Barbara Nitz PS: Now I am checking what we actually have in IKJTSO as opposed to what we should have in there according to sys1.samplib. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
PFA SMF Type 92
Good afternoon, Testing z/OS 1.13, and I (finally) implemented PFA. I like the idea of the checks it performs, but it's killing (well, wounding, anyway) my SMF with the Type 92 Subtype 11 (Filesystem CLOSE) records. Every file it touches, for every check, every time it runs. And it touches a LOT of files. Ideally, there might be a switch to tell it to NOT cut SMF records, but, if it exists, I can't find it in either the doc or the .ini file. Anybody else see this as a problem? Is it a case of Suck it up, Buttercup, or is there a way to avoid this without simply turning off all Type 92, Subtype 11 records? Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: PFA SMF Type 92
Thanks, Mark. This looks like the simplest way to handle it. I guess, since I haven't needed the 92 Sub 11 in forever, turning off collection is safe enough. Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: Mark Zelden m...@mzelden.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 08/26/2013 03:09 PM Subject:Re: PFA SMF Type 92 Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU On Mon, 26 Aug 2013 14:07:04 -0400, Steve Conway steve_con...@ao.uscourts.gov wrote: Good afternoon, Testing z/OS 1.13, and I (finally) implemented PFA. I like the idea of the checks it performs, but it's killing (well, wounding, anyway) my SMF with the Type 92 Subtype 11 (Filesystem CLOSE) records. My client has a large mainframe WebSphere environment and I've had 92 subtypes 11 12 excluded for years because of this. So unless you really need that data for analysis all the time, I would turn them off until such time you want / need them. I know a lot of people are collecting 99s these days, but I have them turned off also. Here is an example of what I am using in my SMFPRMxx: SYS(NOTYPE(4,5,19,20,34,35,40,69,92(10:11),99) Regards, Mark -- Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS mailto:m...@mzelden.com Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html Systems Programming expert at http://expertanswercenter.techtarget.com/ -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Greenbar
One side only. You had to turn the feed around to print Snoopy, calendars, and so on. :-) Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: USPTO does another goodie.
What an innovation - creating a file with an expiration date. ::smh:: I can't even pretend to be surprised... Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: John McKown john.archie.mck...@gmail.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 02/20/2013 08:27 AM Subject:USPTO does another goodie. Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1Sect2=HITOFFd=PALLp=1u=%2Fnetahtml%2FPTO%2Fsrchnum.htmr=1f=Gl=50s1=8,380,676.PN.OS=PN/8,380,676RS=PN/8,380,676 quote Automatic deletion of temporary files *Abstract* Methods, systems, and apparatus, including computer program products feature selecting a file in a distributed file system. The file is associated with a time to live derived from a path name for the file. The file is divided into a plurality of chunks that are distributed among a plurality of servers. Each chunk has a respective modification time indicating when the chunk was last modified. A latest respective modification time among the respective modification times of each of the plurality of chunks is selected. A determination is made as to whether an elapsed time based on the latest modification time is equal to or exceeds the time to live. Each of the chunks of the file is deleted responsive to the determination. Other embodiments of this aspect include corresponding systems, apparatus, and computer program products. /quote So, just put an expiration time as part of a file name and you can patent it? These people have their head where the sun don't shine. OK, maybe nobody else has done this _exact_ thing. But, really? Of course, in today's society, defensive patents are a requirement. So this may be along those lines. -- This is a test of the Emergency Broadcast System. If this had been an actual emergency, do you really think we'd stick around to tell you? Maranatha! John McKown -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Rejoice! z/OS 2.1 addresses some long term JCL complaints from here:
snip John's post of JES enhancements Lots of JES2 and JES3 work being done, a lot of it pointing to convergence of the two products. Interesting stuff. Cheers,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: My Last Days as a Sysprog
Best of luck to you, Eric. I wonder, would you have stayed on, if your employer allowed you to telecommute? I promise not to rant about it. Really. Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: Eric Bielefeld eric-ibmm...@wi.rr.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 01/28/2013 10:27 AM Subject:My Last Days as a Sysprog Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU I'm finally calling it quits. I have this week off, and then I work 2 more weeks. Then I will retire. I find it harder to do my job as I get older. Also, living 170 miles from home 5 days a week isn't much fun. One thing I'm looking forward to is playing in 2 different blues jams, one on Tuesday and one on Wednesday. That's something I really miss now. Tomorrow I'm looking forward to playing. Usually you play about 1/2 hour. There's a lot of people I know there also, so it'll be fun catching up. I think the last time I played in the jam was last summer. I play guitar. I'm not sure if I'll stay subscribed to IBM-Main. I suspect a few weeks after I'm done at work, I'll set my account to nomail. I've learned a lot from many of you. It's also really good to be able to get answers and different opinions when yu have questions. Eric Bielefeld Sr. Systems Programmer 414-475-7434 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMS COMMAND VIA BATCH
Within your JES2PARM, you can specify by JOBCLASS whether to allow command processing or not. I think JES2 gets first whack at saying No, followed by RACF (if JES2 thinks it's OK). Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: R.S. r.skoru...@bremultibank.com.pl To: IBM-MAIN@LISTSERV.UA.EDU Date: 01/17/2013 04:34 PM Subject:Re: SMS COMMAND VIA BATCH Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU W dniu 2013-01-17 17:06, Ed Gould pisze: Lizette: AND that is only if the JES2 init parms are set up that way. Which of course is a big NONO (security wise). Big what-what? AFAIK all commands from job are under OPERCMDS class. -- Radoslaw Skorupka Lodz, Poland -- Tre tej wiadomoci moe zawiera informacje prawnie chronione Banku przeznaczone wycznie do uytku subowego adresata. Odbiorc moe by jedynie jej adresat z wyczeniem dostpu osób trzecich. Jeeli nie jeste adresatem niniejszej wiadomoci lub pracownikiem upowanionym do jej przekazania adresatowi, informujemy, e jej rozpowszechnianie, kopiowanie, rozprowadzanie lub inne dziaanie o podobnym charakterze jest prawnie zabronione i moe by karalne. Jeeli otrzymae t wiadomo omykowo, prosimy niezwocznie zawiadomi nadawc wysyajc odpowied oraz trwale usun t wiadomo wczajc w to wszelkie jej kopie wydrukowane lub zapisane na dysku. This e-mail may contain legally privileged information of the Bank and is intended solely for business use of the addressee. This e-mail may only be received by the addressee and may not be disclosed to any third parties. If you are not the intended addressee of this e-mail or the employee authorised to forward it to the addressee, be advised that any dissemination, copying, distribution or any other similar activity is legally prohibited and may be punishable. If you received this e-mail by mistake please advise the sender immediately by using the reply facility in your e-mail software and delete permanently this e-mail including any copies of it either printed or saved to hard drive. BRE Bank SA, 00-950 Warszawa, ul. Senatorska 18, tel. +48 (22) 829 00 00, fax +48 (22) 829 00 33, www.brebank.pl, e-mail: i...@brebank.pl Sd Rejonowy dla m. st. Warszawy XII Wydzia Gospodarczy Krajowego Rejestru Sdowego, nr rejestru przedsibiorców KRS 025237, NIP: 526-021-50-88. Wedug stanu na dzie 01.01.2013 r. kapita zakadowy BRE Banku SA (w caoci wpacony) wynosi 168.555.904 zotych. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: RMF Spreadsheet Reporter
Hi, Ron. Which days are you getting? I mean, it IS the 3rd of December. :-) I would verify which dates I was specifying, and what dates the data are on the input files. Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: Ron Wells ron.we...@slfs.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 12/03/2012 11:59 AM Subject:Re: RMF Spreadsheet Reporter Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU something strange going on... trying to select from my monthly rmf..whole month...only getting 4days ?? not seeing anything in doc I need to cleanup anything..delete.. I have called all my datasets/local and remote diff. names just incase...same results... went back against my weekly rmf..same results there too... ? From: Lizette Koehler stars...@mindspring.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 11/28/2012 08:36 AM Subject:Re: RMF Spreadsheet Reporter Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU I have not followed this thread as well as I should, so I apologize if this information has been covered Have the Share Presentations on RMF Spreadsheet Reporter been of any assistance? For example http://www-03.ibm.com/support/techdocs/atsmastr.nsf/c6192fb3a432612485256d97 0082de57/fbfd446e23654daf862576f60075f401/%24FILE/RMF%20Overview%20Records%2 0and%20Use%20with%20the%20RMF%20Spreadsheet%20Reporter.pdf or Tiny URL http://tinyurl.com/chbd3zj Or this link: https://share.confex.com/share/115/webprogram/Handout/Session7763/LatestGre atest.pdf Lizette -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Ron Wells Sent: Sunday, November 25, 2012 11:27 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: RMF Spreadsheet Reporter tks for reply...sent ya another---questions ... workload/seervice reporting...who too's..and altering duration of reporting ..red book sort of helpful but missing setup or something to change either.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- Email Disclaimer This E-mail contains confidential information belonging to the sender, which may be legally privileged information. This information is intended only for the use of the individual or entity addressed above. If you are not the intended recipient, or an employee or agent responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution, or the taking of any action in reliance on the contents of the E-mail or attached files is strictly prohibited. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: New way to do UCB lookups
Why is that curious? Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: Lindy Mayfield lindy.mayfi...@sas.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 11/19/2012 09:44 AM Subject:Re: New way to do UCB lookups Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU People still use tapes? Oh. That's curious. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Sam Golob Sent: Monday, November 19, 2012 7:27 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: New way to do UCB lookups Now for a new one. I just wrote another program, called UCBTAPE, that I also put on File 731 on the Updates page of www.cbttape.org. It was written using the same method of reading the UCB's. This one is a TSO command to display all your online tape drives, and to tell you all the outstanding tape mounts. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: DFSMSHSM is a not deleting expired datasets
Thanks to all respondents. A big thanks to Richard for the suggestions. At this point, my management is concerned about changing anything because there must be a reason it's set this way. Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: Richard Marchant richard.march...@shoden.co.za To: IBM-MAIN@LISTSERV.UA.EDU Date: 09/25/2012 09:18 AM Subject:Re: DFSMSHSM is a not deleting expired datasets Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU A couple of things to check (not mentioned so far): May be HSM is trying delete these datasets, or at least some of them, but is being unsuccessful for some reason. Check the HSM activity logs for possible errors. Also remember that HSM will only delete expired datasets if HSM is managing the particular volume(s). For non-SMS volumes (ADDVOLed with AUTOMIG turned on) and for SMS volumes the storage group containing the volumes must be defined with AM=Y. Richard Marchant -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Staller, Allan Sent: 24 September 2012 05:02 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: DFSMSHSM is a not deleting expired datasets From DFHSM Storage Adminstration. EXPIREDDATASETS: Specifying whether to scratch data sets with expired expiration dates Explanation: EXPIREDDATASETS(SCRATCH | NOSCRATCH) is an optional parameter specifying whether or not DFSMShsm should scratch data sets having explicit expiration dates when the date has passed (data set has expired). SMS-managed data sets not having explicit expiration dates are expired when they have met their management class expiration criteria. Note: Explicit expiration dates can be set by JCL, utility parameters, Data Class Expiration parameters, or Data Class Retention parameters. The explicit expiration date for a data set can be found in the data set's VTOC entry. SCRATCH specifies that DFSMShsm scratch data sets that have an expired expiration date when it performs space management and migration cleanup. NOSCRATCH specifies that DFSMShsm ignore the expiration date. DFSMShsm processes the data set as if the expiration date has not been reached. SMS relationship: Parameter applies in some instances to SMS-managed DASD volumes or data sets. SETSYS defaults: None. DFSMShsm defaults: If you do not specify this parameter on any SETSYS command, the DFSMShsm default is not to scratch the expired data sets. Typically, ML2 datasets and BACKUP datasets reside on tape. If the datasets are not expired, no tapes will be released except by recycle or manual deletion. Once all of the datasets on a particular tape are released (via RECYCLE, HDEL, or HBDEL), DFHSM will notify the EDM to expire the tape, and return it to the scratch pool. Caveat. It is possible to set up DFHSM tape pooling, in which case, the tape will be returned to the DFHSM pool, instead of the scratch pool and the EDM will not be invoked. snip I guess I am showing my lack of experience on this topic, but what does EXPIREDDATASETS setting have to do with whether or not the tapes are being released or not? Am I misunderstanding the book? From the HSM administrators guide: During automatic primary space management, the example scratches expired data sets that have valid explicit expiration dates in the data set's VTOC entry. The EXPIREDDATASETS parameter of the SETSYS command specifies the SCRATCH subparameter indicating for DFSMShsm to scratch any data set that has passed the expiration date. _ Dave Jousma Assistant Vice President, Mainframe Services david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 /snip snip -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Staller, Allan snip Sounds like a good setup, the EDM reference will scratch the tape when DFHSM says it is done with it. However, since you are not expiring datasets, very few, if any tapes are being released. Of course, since you work for the legal system, they might not want things scratched Check with the powers that be before proceeding... IMO, change EXPIREDDATASETS to SCRATCH and bite the bullet. The first secondary space management that runs will do a lot of work. /snip snip I have HSM set as an External Data Manager in CA1 (EDM=HSM,PGM=ARCCTL in CTOEDM00). My SYS1.PARMLIB(ARCCMD00) specifies EXPIREDDATASETS(NOSCRATCH). For those with CA1 and EDM specified, how is yours set up? What reason would a shop have to specify NOSCRATCH? Can you tell I haven't supported HSM before? :-) (Always been in places with FDR, or had a separate team doing storage stuff for the past 20 years or so.) /snip -- For
Re: DFSMSHSM is a not deleting expired datasets
Interesting thought, Elardus, but I'm just going to leave it alone for now. It's not like I don't have anything to keep me busy. :-) Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: Elardus Engelbrecht elardus.engelbre...@sita.co.za To: IBM-MAIN@LISTSERV.UA.EDU Date: 09/25/2012 10:06 AM Subject:Re: DFSMSHSM is a not deleting expired datasets Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU Steve Conway wrote: At this point, my management is concerned about changing anything because there must be a reason it's set this way. Probably yes. Perhaps the (previous) owners wanted to keep them due to some policy/rule. Is it possible for you to list them by 'last used' date and then backup/dump them before going to have HSM deal with them 21000 datasets? Of course, I'm aware that such step could change the expired status of those datasets, but I'm just wondering... Groete / Greetings Elardus Engelbrecht -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: DFSMSHSM is a not deleting expired datasets
Hi, Michael. Not that I know of. Where would that commonly be specified? Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: Michael Wickman mwick...@waddell.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 09/25/2012 11:06 AM Subject:Re: DFSMSHSM is a not deleting expired datasets Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU Are you doing the release expirebv command on some schedule? font size=1 div style='border:none;border-bottom:double windowtext 2.25pt;padding:0in 0in 1.0pt 0in' /div This email is intended to be reviewed by only the intended recipient and may contain information that is privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any review, use, dissemination, disclosure or copying of this email and its attachments, if any, is strictly prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system. /font -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: DFSMSHSM is a not deleting expired datasets
All, I have HSM set as an External Data Manager in CA1 (EDM=HSM,PGM=ARCCTL in CTOEDM00). My SYS1.PARMLIB(ARCCMD00) specifies EXPIREDDATASETS(NOSCRATCH). For those with CA1 and EDM specified, how is yours set up? What reason would a shop have to specify NOSCRATCH? Can you tell I haven't supported HSM before? :-) (Always been in places with FDR, or had a separate team doing storage stuff for the past 20 years or so.) Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: Staller, Allan allan.stal...@kbmg.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 09/24/2012 10:13 AM Subject:Re: DFSMSHSM is a not deleting expired datasets Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU HSEND SETSYS EXPIREDDATASETS(SCRATCH). And yes, it will do all of them the first time SEC SPACE MGMT runs. Just bite the bullet HTH, snip I did a TSO HSEND QUERY SETSYS and noticed that I have scheduled space mgt for primary on (0600, 1800) and for secondary on (2400, 0459). But I also noticed that the Scratch expired Data Sets is set to NO. That could be the problem. How do I turn it on? I am taking it to higher authorities because I will be deleting a massive amount of data. I suspect I will have to create JCL with TSO Batch to HDELETE the expired datasets. At that point I should turn on the parameter to let DFSMSHSM do its job. /snip -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Auditors Don't Know Squat!
Mike Ward posted: Way back when, we used to call a memory leak something else on the mainframe. I have used memory leak for so long I forgot what that term was. I think I remember hearing storage creep. Cheers,,,Steve Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Auditors Don't Know Squat!
CICS and VTAM were the kings of chewing up storage... Steven F. Conway, CISSP LA Systems z/OS Systems Support Phone: 703.295.1926 steve_con...@ao.uscourts.gov From: Scott Ford scott_j_f...@yahoo.com To: IBM-MAIN@LISTSERV.UA.EDU Date: 08/17/2012 02:43 PM Subject:Re: Auditors Don't Know Squat! Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU Yep, zMan and Steve I remember storage creep, was it CICS ? Scott ford www.identityforge.com On Aug 17, 2012, at 2:38 PM, zMan zedgarhoo...@gmail.com wrote: On Fri, Aug 17, 2012 at 11:35 AM, Steve Conway steve_con...@ao.uscourts.gov wrote: I think I remember hearing storage creep. Yeah, we had some of those. Their offices were a mess and they didn't bathe often enough. Oh, wait, you're talking software...yeah, core cancer or storage creep were what I was weaned on. -- zMan -- I've got a mainframe and I'm not afraid to use it -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN