Re: Wait Code on IPL
As you can tell by doing IPLDATA STATUS under IPCS against any dump (or ACTIVE), IEAVNP26 is SMS initialization. No one should be issuing an ABEND with a code of 000, so a standalone dump would be needed to see what is going on. Jim Mulder z/OS Diagnosis, Design, Development, Test IBM Corp. Poughkeepsie NY "IBM Mainframe Discussion List" wrote on 03/31/2021 09:57:15 AM: > From: "Schneck, Glenn" <038354c41b84-dmarc-requ...@listserv.ua.edu> > To: IBM-MAIN@LISTSERV.UA.EDU > Date: 03/31/2021 01:40 PM > Subject: Wait Code on IPL > Sent by: "IBM Mainframe Discussion List" > > We are getting a wait code 040 with abend code and Reason Code > . We did see IEA303W message with Abend code and Reason > Code but only with the first IPL attempt. We have not seen > it with subsequent IPLs. We as a group have spent a few days > researching the wait, abend and reason codes and have found nothing > that would indicate the > > problem. There has been no resent changes to parmlib, or i/o > configurations. The module abending is IEAVNP26, it's located in > SYS1.NUCLEUS. The last message on the console is "GRS > initialization completed successfully". The last successful IPL > was 12/13/2020. > > > > We do have a question; would 2700 uninitialized volumes prevent an > IPL and cause a hang/abend after GRS Activates? > > TIA > > Glenn > > Glenn Schneck > USDC Manager 1 - GPS > Deloitte Consulting LLP > 901 International Parkway, STE 100 > Lake Mary, FL 32746 > Tel/Direct: +1 407-438-8809 | Fax: +1 866-396-3121 | Mobile: +1 321-279-3535 > gschn...@deloitte.com| www.deloitte.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Wait Code on IPL
Uninitialized? I am guessing you haven't been able to IPL since
adding them to the IO? UCBs are stored in the ESQA area, so you need
to up that amount. https://en.wikipedia.org/wiki/Unit_Control_Block
On Wed, Mar 31, 2021 at 9:07 AM Schneck, Glenn
<038354c41b84-dmarc-requ...@listserv.ua.edu> wrote:
>
> We are getting a wait code 040 with abend code and Reason Code .
> We did see IEA303W message with Abend code and Reason Code but
> only with the first IPL attempt. We have not seen it with subsequent IPLs.
> We as a group have spent a few days researching the wait, abend and reason
> codes and have found nothing that would indicate the
>
> problem. There has been no resent changes to parmlib, or i/o configurations.
> The module abending is IEAVNP26, it's located in SYS1.NUCLEUS. The last
> message on the console is "GRS initialization completed successfully". The
> last successful IPL was 12/13/2020.
>
>
>
> We do have a question; would 2700 uninitialized volumes prevent an IPL and
> cause a hang/abend after GRS Activates?
>
> TIA
>
> Glenn
>
> Glenn Schneck
> USDC Manager 1 - GPS
> Deloitte Consulting LLP
> 901 International Parkway, STE 100
> Lake Mary, FL 32746
> Tel/Direct: +1 407-438-8809 | Fax: +1 866-396-3121 | Mobile: +1 321-279-3535
> gschn...@deloitte.com| www.deloitte.com
>
> Please consider the environment before printing.
>
>
> This message (including any attachments) contains confidential information
> intended for a specific individual and purpose, and is protected by law. If
> you are not the intended recipient, you should delete this message and any
> disclosure, copying, or distribution of this message, or the taking of any
> action based on it, by you is strictly prohibited.
>
> Deloitte refers to a Deloitte member firm, one of its related entities, or
> Deloitte Touche Tohmatsu Limited ("DTTL"). Each Deloitte member firm is a
> separate legal entity and a member of DTTL. DTTL does not provide services to
> clients. Please see www.deloitte.com/about to learn more.
>
> v.E.1
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
Mike A Schwab, Springfield IL USA
Where do Forest Rangers go to get away from it all?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Wait Code on IPL
IIRC the wait state was more telling when INITSQA was required, but it's been
so long since I've set/defined it in the LOADxx member of IPLPARM- I recall
getting the wait state and found I needed to add this to my load member
my INITSQA 0020K 0001M has been set since 2015 IIRC.
Carmen Vitullo
-Original Message-
From: Sharon <038467b8de97-dmarc-requ...@listserv.ua.edu>
To: IBM-MAIN
Date: Wednesday, 31 March 2021 9:51 AM CDT
Subject: Re: Wait Code on IPL
We also just recently started getting a Wait state at IPL on one of test lpar
sandboxes and nothing had changed on our system. It wasn't consistently failing
either. I opened up a case with IBM and was told to put in ESQA in INITSQA. Of
course, that resolved our issue. I just wanted it to consistently fail and I
wasn't able too.
Thanks.
Sharon Lopez
Software Systems Programming Specialist
BB now Truist - IT Production Engineering - Mainframe OS
3200 Beechleaf Ct Ste 200 | Raleigh, NC 27604
Office (919) 327-6369
sharon.lo...@truist.com
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Schneck, Glenn
Sent: Wednesday, March 31, 2021 9:57 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Wait Code on IPL
We are getting a wait code 040 with abend code and Reason Code .
We did see IEA303W message with Abend code and Reason Code but
only with the first IPL attempt. We have not seen it with subsequent IPLs. We
as a group have spent a few days researching the wait, abend and reason codes
and have found nothing that would indicate the
problem. There has been no resent changes to parmlib, or i/o configurations.
The module abending is IEAVNP26, it's located in SYS1.NUCLEUS. The last message
on the console is "GRS initialization completed successfully". The last
successful IPL was 12/13/2020.
We do have a question; would 2700 uninitialized volumes prevent an IPL and
cause a hang/abend after GRS Activates?
TIA
Glenn
Glenn Schneck
USDC Manager 1 - GPS
Deloitte Consulting LLP
901 International Parkway, STE 100
Lake Mary, FL 32746
Tel/Direct: +1 407-438-8809 | Fax: +1 866-396-3121 | Mobile: +1 321-279-3535
gschn...@deloitte.com|
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.deloitte.com=DwIFAg=eV2iJfkzEFLczQ4X0OAgRzp6F5Rf1ImixTkgui8b9xg=9yw11_MiXnUSZGjVRFdh3nhSF3wgfOV0ObXnVJoZtuc=a1yM6F7R5Ye7cFjcz5YtRapmCi7qIUs_ekP2Ma9maJM=TtUKITik04hcOOhcCeRsiyEDlB68ookDD1yY77Q8QWA=
Please consider the environment before printing.
This message (including any attachments) contains confidential information
intended for a specific individual and purpose, and is protected by law. If you
are not the intended recipient, you should delete this message and any
disclosure, copying, or distribution of this message, or the taking of any
action based on it, by you is strictly prohibited.
Deloitte refers to a Deloitte member firm, one of its related entities, or
Deloitte Touche Tohmatsu Limited ("DTTL"). Each Deloitte member firm is a
separate legal entity and a member of DTTL. DTTL does not provide services to
clients. Please see
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.deloitte.com_about=DwIFAg=eV2iJfkzEFLczQ4X0OAgRzp6F5Rf1ImixTkgui8b9xg=9yw11_MiXnUSZGjVRFdh3nhSF3wgfOV0ObXnVJoZtuc=a1yM6F7R5Ye7cFjcz5YtRapmCi7qIUs_ekP2Ma9maJM=_nCobr5Nfemn2gkFIRQC7vzuVBuTpBHZgzSbP69PoKo=
to learn more.
v.E.1
--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
lists...@listserv.ua.edu with the message: INFO IBM-MAIN
The information transmitted is intended solely for the individual or entity to
which it is addressed and may contain confidential and/or privileged material.
Any review, retransmission, dissemination or other use of or taking action in
reliance upon this information by persons or entities other than the intended
recipient is prohibited. If you have received this email in error please
contact the sender and delete the material from any computer.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Wait Code on IPL
We also just recently started getting a Wait state at IPL on one of test lpar
sandboxes and nothing had changed on our system. It wasn't consistently
failing either. I opened up a case with IBM and was told to put in ESQA in
INITSQA. Of course, that resolved our issue. I just wanted it to
consistently fail and I wasn't able too.
Thanks.
Sharon Lopez
Software Systems Programming Specialist
BB now Truist - IT Production Engineering - Mainframe OS
3200 Beechleaf Ct Ste 200 | Raleigh, NC 27604
Office (919) 327-6369
sharon.lo...@truist.com
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Schneck, Glenn
Sent: Wednesday, March 31, 2021 9:57 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Wait Code on IPL
We are getting a wait code 040 with abend code and Reason Code .
We did see IEA303W message with Abend code and Reason Code but
only with the first IPL attempt. We have not seen it with subsequent IPLs.
We as a group have spent a few days researching the wait, abend and reason
codes and have found nothing that would indicate the
problem. There has been no resent changes to parmlib, or i/o configurations.
The module abending is IEAVNP26, it's located in SYS1.NUCLEUS. The last
message on the console is "GRS initialization completed successfully". The
last successful IPL was 12/13/2020.
We do have a question; would 2700 uninitialized volumes prevent an IPL and
cause a hang/abend after GRS Activates?
TIA
Glenn
Glenn Schneck
USDC Manager 1 - GPS
Deloitte Consulting LLP
901 International Parkway, STE 100
Lake Mary, FL 32746
Tel/Direct: +1 407-438-8809 | Fax: +1 866-396-3121 | Mobile: +1 321-279-3535
gschn...@deloitte.com|
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.deloitte.com=DwIFAg=eV2iJfkzEFLczQ4X0OAgRzp6F5Rf1ImixTkgui8b9xg=9yw11_MiXnUSZGjVRFdh3nhSF3wgfOV0ObXnVJoZtuc=a1yM6F7R5Ye7cFjcz5YtRapmCi7qIUs_ekP2Ma9maJM=TtUKITik04hcOOhcCeRsiyEDlB68ookDD1yY77Q8QWA=
Please consider the environment before printing.
This message (including any attachments) contains confidential information
intended for a specific individual and purpose, and is protected by law. If you
are not the intended recipient, you should delete this message and any
disclosure, copying, or distribution of this message, or the taking of any
action based on it, by you is strictly prohibited.
Deloitte refers to a Deloitte member firm, one of its related entities, or
Deloitte Touche Tohmatsu Limited ("DTTL"). Each Deloitte member firm is a
separate legal entity and a member of DTTL. DTTL does not provide services to
clients. Please see
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.deloitte.com_about=DwIFAg=eV2iJfkzEFLczQ4X0OAgRzp6F5Rf1ImixTkgui8b9xg=9yw11_MiXnUSZGjVRFdh3nhSF3wgfOV0ObXnVJoZtuc=a1yM6F7R5Ye7cFjcz5YtRapmCi7qIUs_ekP2Ma9maJM=_nCobr5Nfemn2gkFIRQC7vzuVBuTpBHZgzSbP69PoKo=
to learn more.
v.E.1
--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
lists...@listserv.ua.edu with the message: INFO IBM-MAIN
The information transmitted is intended solely for the individual or entity to
which it is addressed and may contain confidential and/or privileged material.
Any review, retransmission, dissemination or other use of or taking action in
reliance upon this information by persons or entities other than the intended
recipient is prohibited. If you have received this email in error please
contact the sender and delete the material from any computer.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Wait Code on IPL
Glen do you have any vendor UIM's installed? seems NIP may have been looking to
load a module and it could not find one
Carmen Vitullo
-Original Message-
From: Glenn <038354c41b84-dmarc-requ...@listserv.ua.edu>
To: IBM-MAIN
Date: Wednesday, 31 March 2021 9:07 AM CDT
Subject: Wait Code on IPL
We are getting a wait code 040 with abend code and Reason Code .
We did see IEA303W message with Abend code and Reason Code but
only with the first IPL attempt. We have not seen it with subsequent IPLs. We
as a group have spent a few days researching the wait, abend and reason codes
and have found nothing that would indicate the
problem. There has been no resent changes to parmlib, or i/o configurations.
The module abending is IEAVNP26, it's located in SYS1.NUCLEUS. The last message
on the console is "GRS initialization completed successfully". The last
successful IPL was 12/13/2020.
We do have a question; would 2700 uninitialized volumes prevent an IPL and
cause a hang/abend after GRS Activates?
TIA
Glenn
Glenn Schneck
USDC Manager 1 - GPS
Deloitte Consulting LLP
901 International Parkway, STE 100
Lake Mary, FL 32746
Tel/Direct: +1 407-438-8809 | Fax: +1 866-396-3121 | Mobile: +1 321-279-3535
gschn...@deloitte.com| www.deloitte.com
Please consider the environment before printing.
This message (including any attachments) contains confidential information
intended for a specific individual and purpose, and is protected by law. If you
are not the intended recipient, you should delete this message and any
disclosure, copying, or distribution of this message, or the taking of any
action based on it, by you is strictly prohibited.
Deloitte refers to a Deloitte member firm, one of its related entities, or
Deloitte Touche Tohmatsu Limited ("DTTL"). Each Deloitte member firm is a
separate legal entity and a member of DTTL. DTTL does not provide services to
clients. Please see www.deloitte.com/about to learn more.
v.E.1
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Wait Code on IPL
Glenn, that seems odd to have RC and RSN 00.are you able to cut/paste current wait state string in its entirety? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Wait Code on IPL
WAG. Do you have an INITSQA statement in the LOADxx member that was used for
that system? If not, you just might be at the edge of needing more SQA during
IPL processing that resulted in the initial IPL wait state.
Mark Jacobs
Sent from ProtonMail, Swiss-based encrypted email.
GPG Public Key -
https://api.protonmail.ch/pks/lookup?op=get=markjac...@protonmail.com
‐‐‐ Original Message ‐‐‐
On Wednesday, March 31st, 2021 at 9:57 AM, Schneck, Glenn
<038354c41b84-dmarc-requ...@listserv.ua.edu> wrote:
> We are getting a wait code 040 with abend code and Reason Code .
> We did see IEA303W message with Abend code and Reason Code but
> only with the first IPL attempt. We have not seen it with subsequent IPLs. We
> as a group have spent a few days researching the wait, abend and reason codes
> and have found nothing that would indicate the
>
> problem. There has been no resent changes to parmlib, or i/o configurations.
> The module abending is IEAVNP26, it's located in SYS1.NUCLEUS. The last
> message on the console is "GRS initialization completed successfully". The
> last successful IPL was 12/13/2020.
>
> We do have a question; would 2700 uninitialized volumes prevent an IPL and
> cause a hang/abend after GRS Activates?
>
> TIA
>
> Glenn
>
> Glenn Schneck
>
> USDC Manager 1 - GPS
>
> Deloitte Consulting LLP
>
> 901 International Parkway, STE 100
>
> Lake Mary, FL 32746
>
> Tel/Direct: +1 407-438-8809 | Fax: +1 866-396-3121 | Mobile: +1 321-279-3535
>
> gschn...@deloitte.com| www.deloitte.com
>
> Please consider the environment before printing.
>
> This message (including any attachments) contains confidential information
> intended for a specific individual and purpose, and is protected by law. If
> you are not the intended recipient, you should delete this message and any
> disclosure, copying, or distribution of this message, or the taking of any
> action based on it, by you is strictly prohibited.
>
> Deloitte refers to a Deloitte member firm, one of its related entities, or
> Deloitte Touche Tohmatsu Limited ("DTTL"). Each Deloitte member firm is a
> separate legal entity and a member of DTTL. DTTL does not provide services to
> clients. Please see www.deloitte.com/about to learn more.
>
> v.E.1
>
> -
>
> For IBM-MAIN subscribe / signoff / archive access instructions,
>
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Wait Code on IPL
We are getting a wait code 040 with abend code and Reason Code .
We did see IEA303W message with Abend code and Reason Code but
only with the first IPL attempt. We have not seen it with subsequent IPLs.
We as a group have spent a few days researching the wait, abend and reason
codes and have found nothing that would indicate the
problem. There has been no resent changes to parmlib, or i/o configurations.
The module abending is IEAVNP26, it's located in SYS1.NUCLEUS. The last
message on the console is "GRS initialization completed successfully". The
last successful IPL was 12/13/2020.
We do have a question; would 2700 uninitialized volumes prevent an IPL and
cause a hang/abend after GRS Activates?
TIA
Glenn
Glenn Schneck
USDC Manager 1 - GPS
Deloitte Consulting LLP
901 International Parkway, STE 100
Lake Mary, FL 32746
Tel/Direct: +1 407-438-8809 | Fax: +1 866-396-3121 | Mobile: +1 321-279-3535
gschn...@deloitte.com| www.deloitte.com
Please consider the environment before printing.
This message (including any attachments) contains confidential information
intended for a specific individual and purpose, and is protected by law. If you
are not the intended recipient, you should delete this message and any
disclosure, copying, or distribution of this message, or the taking of any
action based on it, by you is strictly prohibited.
Deloitte refers to a Deloitte member firm, one of its related entities, or
Deloitte Touche Tohmatsu Limited ("DTTL"). Each Deloitte member firm is a
separate legal entity and a member of DTTL. DTTL does not provide services to
clients. Please see www.deloitte.com/about to learn more.
v.E.1
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
