RE: WinCVS problem - sandbox files not shown
Ok!! Now i've got it =) I should probably have done my homework before I posted the question... The problem was that I've had incorrect filter settings for a long time, but since we have the DST-bug which makes all files marked as changed the files were shown earlier, but when the time was changed again CVS began to behave correctly - which caused our problems! Thanks a lot!! --Stefan Fresco's Discovery: If you knew what you were doing you'd probably be bored. -Original Message- From: Mike Ayers [mailto:[EMAIL PROTECTED]] Sent: Sun 11/17/2002 6:42 AM To: Stefan Andersson Cc: [EMAIL PROTECTED] Subject:Re: WinCVS problem - sandbox files not shown Stefan Andersson wrote: (I've tried all combinations of the Show buttons, but the only thing that differs is if non-cvs files is shown or not...) Incorrect. There are a number of Show buttons colored red. Those buttons will hide all files *except* those shown. Please check those and make sure none are depressed. If any are, tell them a good joke, or just click them, and your hidden files should come out to play. /|/|ike ___ Info-cvs mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/info-cvs
Re: WinCVS problem - sandbox files not shown
Stefan Andersson wrote: (I've tried all combinations of the Show buttons, but the only thing that differs is if non-cvs files is shown or not...) Incorrect. There are a number of Show buttons colored red. Those buttons will hide all files *except* those shown. Please check those and make sure none are depressed. If any are, tell them a good joke, or just click them, and your hidden files should come out to play. /|/|ike ___ Info-cvs mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/info-cvs
WinCVS problem - sandbox files not shown
Hi! We are currently having some problems using WinCvs. The problem is that the WinCvs-clients refuses to show the files that exists in the workarea (sandbox) - the files really exist there and can be viewed in explorer. It is also posible to check the history of the files and to change revision form the command prompt, so it doesn't seem to be any problems with the server (running cvsnt under Win2k). Since the problem started about the same time that as the DST transition I suppose that this may be the cause of the problem, but from what I have read this should make the files marked as changed and not make them disappear completly from WinCvs...(?) Non-cvs files are still shown and I have tested all kinds of file-filter settings... When the problem came up we were running WinCvs 1.2 as clients, now I have also tested to upgrade to 1.3b10 but the problem still exists! I have also tested to check out the module again to both FAT32 and NTFS partitions without any success (the files are ok but doesn't show in WinCvs...) Is there anyone that knows someting about this problem? And how to fix it?? Thanks - Stefan Andersson ___ Info-cvs mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/info-cvs
Re: WinCVS problem - sandbox files not shown
Stefan Andersson writes [in exceedingly long lines]: We are currently having some problems using WinCvs. The problem is that the WinCvs-clients refuses to show the files that exists in the workarea (sandbox) - the files really exist there and can be viewed in explorer. It is also posible to check the history of the files and to change revision form the command prompt, so it doesn't seem to be any problems with the server (running cvsnt under Win2k). WinCVS has a separate mailing list; see http://www.wincvs.org/. Check the various Show buttons to be sure they're set correctly. -Larry Jones You don't get to be Mom if you can't fix everything just right. -- Calvin ___ Info-cvs mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/info-cvs
RE: WinCVS problem - sandbox files not shown
I checked the www.wincvs.org earlier, but managed to miss the mailing list link at the bottom of the page... I'll try my question there instead. (I've tried all combinations of the Show buttons, but the only thing that differs is if non-cvs files is shown or not...) Thanks anyway! -Stefan -Original Message- From: Larry Jones [mailto:lawrence.jones;eds.com] Sent: Fri 11/15/2002 4:28 PM To: Stefan Andersson Cc: [EMAIL PROTECTED] Subject:Re: WinCVS problem - sandbox files not shown Stefan Andersson writes [in exceedingly long lines]: We are currently having some problems using WinCvs. The problem is that the WinCvs-clients refuses to show the files that exists in the workarea (sandbox) - the files really exist there and can be viewed in explorer. It is also posible to check the history of the files and to change revision form the command prompt, so it doesn't seem to be any problems with the server (running cvsnt under Win2k). WinCVS has a separate mailing list; see http://www.wincvs.org/. Check the various Show buttons to be sure they're set correctly. -Larry Jones You don't get to be Mom if you can't fix everything just right. -- Calvin ___ Info-cvs mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/info-cvs
