[Intel-gfx] [PATCH v2 1/2] drm/i915/vlv: Remove wait for for punit to updates freq.

[deepak . s]

From: Deepak S deepa...@linux.intel.com

When GPU is idle on VLV, Request freq to punit should be good enough to
get the voltage back to VNN. Also, make sure gfx clock force applies
before requesting the freq fot vlv.

v2: Do forcewake before setting idle frequency (ville)
Update function comments to match the code (Deepak)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75244
suggested-by: Jesse Barnes jbar...@virtuousgeek.org
Signed-off-by: Deepak S deepa...@linux.intel.com
---
 drivers/gpu/drm/i915/intel_pm.c | 41 +++--
 1 file changed, 11 insertions(+), 30 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index a7516ed..3df929a 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4043,51 +4043,32 @@ static void valleyview_set_rps(struct drm_device *dev, 
u8 val)
trace_intel_gpu_freq_change(intel_gpu_freq(dev_priv, val));
 }
 
-/* vlv_set_rps_idle: Set the frequency to Rpn if Gfx clocks are down
+/* vlv_set_rps_idle: Set the frequency to idle, if Gfx clocks are down
  *
  * * If Gfx is Idle, then
- * 1. Mask Turbo interrupts
- * 2. Bring up Gfx clock
- * 3. Change the freq to Rpn and wait till P-Unit updates freq
- * 4. Clear the Force GFX CLK ON bit so that Gfx can down
- * 5. Unmask Turbo interrupts
+ * 1. Forcewake Media well.
+ * 2. Request idle freq.
+ * 3. Release Forcewake of Media well.
 */
 static void vlv_set_rps_idle(struct drm_i915_private *dev_priv)
 {
struct drm_device *dev = dev_priv-dev;
u32 val = dev_priv-rps.idle_freq;
 
-   /* CHV and latest VLV don't need to force the gfx clock */
-   if (IS_CHERRYVIEW(dev) || dev-pdev-revision = 0xd) {
+   /* CHV don't need to force the gfx clock */
+   if (IS_CHERRYVIEW(dev)) {
valleyview_set_rps(dev_priv-dev, val);
return;
}
 
-   /*
-* When we are idle.  Drop to min voltage state.
-*/
-
if (dev_priv-rps.cur_freq = val)
return;
 
-   /* Mask turbo interrupt so that they will not come in between */
-   I915_WRITE(GEN6_PMINTRMSK,
-  gen6_sanitize_rps_pm_mask(dev_priv, ~0));
-
-   vlv_force_gfx_clock(dev_priv, true);
-
-   dev_priv-rps.cur_freq = val;
-
-   vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val);
-
-   if (wait_for(((vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS))
-GENFREQSTATUS) == 0, 100))
-   DRM_ERROR(timed out waiting for Punit\n);
-
-   gen6_set_rps_thresholds(dev_priv, val);
-   vlv_force_gfx_clock(dev_priv, false);
-
-   I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val));
+   /* Wake up the media well, as that takes a lot less
+* power than the Render well. */
+   intel_uncore_forcewake_get(dev_priv, FORCEWAKE_MEDIA);
+   valleyview_set_rps(dev_priv-dev, val);
+   intel_uncore_forcewake_get(dev_priv, FORCEWAKE_MEDIA);
 }
 
 void gen6_rps_busy(struct drm_i915_private *dev_priv)
-- 
1.9.1

___
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH v2 1/2] drm/i915/vlv: Remove wait for for punit to updates freq.

[Ville Syrjälä]

On Fri, May 08, 2015 at 08:43:10PM +0530, deepa...@linux.intel.com wrote:
 From: Deepak S deepa...@linux.intel.com
 
 When GPU is idle on VLV, Request freq to punit should be good enough to
 get the voltage back to VNN. Also, make sure gfx clock force applies
 before requesting the freq fot vlv.
 
 v2: Do forcewake before setting idle frequency (ville)
 Update function comments to match the code (Deepak)
 
 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75244
 suggested-by: Jesse Barnes jbar...@virtuousgeek.org
 Signed-off-by: Deepak S deepa...@linux.intel.com
 ---
  drivers/gpu/drm/i915/intel_pm.c | 41 
 +++--
  1 file changed, 11 insertions(+), 30 deletions(-)
 
 diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
 index a7516ed..3df929a 100644
 --- a/drivers/gpu/drm/i915/intel_pm.c
 +++ b/drivers/gpu/drm/i915/intel_pm.c
 @@ -4043,51 +4043,32 @@ static void valleyview_set_rps(struct drm_device 
 *dev, u8 val)
   trace_intel_gpu_freq_change(intel_gpu_freq(dev_priv, val));
  }
  
 -/* vlv_set_rps_idle: Set the frequency to Rpn if Gfx clocks are down
 +/* vlv_set_rps_idle: Set the frequency to idle, if Gfx clocks are down
   *
   * * If Gfx is Idle, then
 - * 1. Mask Turbo interrupts
 - * 2. Bring up Gfx clock
 - * 3. Change the freq to Rpn and wait till P-Unit updates freq
 - * 4. Clear the Force GFX CLK ON bit so that Gfx can down
 - * 5. Unmask Turbo interrupts
 + * 1. Forcewake Media well.
 + * 2. Request idle freq.
 + * 3. Release Forcewake of Media well.
  */
  static void vlv_set_rps_idle(struct drm_i915_private *dev_priv)
  {
   struct drm_device *dev = dev_priv-dev;
   u32 val = dev_priv-rps.idle_freq;
  
 - /* CHV and latest VLV don't need to force the gfx clock */
 - if (IS_CHERRYVIEW(dev) || dev-pdev-revision = 0xd) {
 + /* CHV don't need to force the gfx clock */
 + if (IS_CHERRYVIEW(dev)) {
   valleyview_set_rps(dev_priv-dev, val);
   return;
   }
  
 - /*
 -  * When we are idle.  Drop to min voltage state.
 -  */
 -
   if (dev_priv-rps.cur_freq = val)
   return;
  
 - /* Mask turbo interrupt so that they will not come in between */
 - I915_WRITE(GEN6_PMINTRMSK,
 -gen6_sanitize_rps_pm_mask(dev_priv, ~0));
 -
 - vlv_force_gfx_clock(dev_priv, true);
 -
 - dev_priv-rps.cur_freq = val;
 -
 - vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val);
 -
 - if (wait_for(((vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS))
 -  GENFREQSTATUS) == 0, 100))
 - DRM_ERROR(timed out waiting for Punit\n);
 -
 - gen6_set_rps_thresholds(dev_priv, val);
 - vlv_force_gfx_clock(dev_priv, false);
 -
 - I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val));
 + /* Wake up the media well, as that takes a lot less
 +  * power than the Render well. */
 + intel_uncore_forcewake_get(dev_priv, FORCEWAKE_MEDIA);
 + valleyview_set_rps(dev_priv-dev, val);
 + intel_uncore_forcewake_get(dev_priv, FORCEWAKE_MEDIA);

_put

With that fixed this is:
Reviewed-by: Ville Syrjälä ville.syrj...@linux.intel.com

  }
  
  void gen6_rps_busy(struct drm_i915_private *dev_priv)
 -- 
 1.9.1

-- 
Ville Syrjälä
Intel OTC
___
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH v2 1/2] drm/i915/vlv: Remove wait for for punit to updates freq.

[Deepak S]

On Friday 08 May 2015 10:04 PM, Ville Syrjälä wrote:

On Fri, May 08, 2015 at 08:43:10PM +0530, deepa...@linux.intel.com wrote:

From: Deepak S deepa...@linux.intel.com

When GPU is idle on VLV, Request freq to punit should be good enough to
get the voltage back to VNN. Also, make sure gfx clock force applies
before requesting the freq fot vlv.

v2: Do forcewake before setting idle frequency (ville)
 Update function comments to match the code (Deepak)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75244
suggested-by: Jesse Barnes jbar...@virtuousgeek.org
Signed-off-by: Deepak S deepa...@linux.intel.com
---
  drivers/gpu/drm/i915/intel_pm.c | 41 +++--
  1 file changed, 11 insertions(+), 30 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index a7516ed..3df929a 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4043,51 +4043,32 @@ static void valleyview_set_rps(struct drm_device *dev, 
u8 val)
trace_intel_gpu_freq_change(intel_gpu_freq(dev_priv, val));
  }
  
-/* vlv_set_rps_idle: Set the frequency to Rpn if Gfx clocks are down

+/* vlv_set_rps_idle: Set the frequency to idle, if Gfx clocks are down
   *
   * * If Gfx is Idle, then
- * 1. Mask Turbo interrupts
- * 2. Bring up Gfx clock
- * 3. Change the freq to Rpn and wait till P-Unit updates freq
- * 4. Clear the Force GFX CLK ON bit so that Gfx can down
- * 5. Unmask Turbo interrupts
+ * 1. Forcewake Media well.
+ * 2. Request idle freq.
+ * 3. Release Forcewake of Media well.
  */
  static void vlv_set_rps_idle(struct drm_i915_private *dev_priv)
  {
struct drm_device *dev = dev_priv-dev;
u32 val = dev_priv-rps.idle_freq;
  
-	/* CHV and latest VLV don't need to force the gfx clock */

-   if (IS_CHERRYVIEW(dev) || dev-pdev-revision = 0xd) {
+   /* CHV don't need to force the gfx clock */
+   if (IS_CHERRYVIEW(dev)) {
valleyview_set_rps(dev_priv-dev, val);
return;
}
  
-	/*

-* When we are idle.  Drop to min voltage state.
-*/
-
if (dev_priv-rps.cur_freq = val)
return;
  
-	/* Mask turbo interrupt so that they will not come in between */

-   I915_WRITE(GEN6_PMINTRMSK,
-  gen6_sanitize_rps_pm_mask(dev_priv, ~0));
-
-   vlv_force_gfx_clock(dev_priv, true);
-
-   dev_priv-rps.cur_freq = val;
-
-   vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val);
-
-   if (wait_for(((vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS))
-GENFREQSTATUS) == 0, 100))
-   DRM_ERROR(timed out waiting for Punit\n);
-
-   gen6_set_rps_thresholds(dev_priv, val);
-   vlv_force_gfx_clock(dev_priv, false);
-
-   I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val));
+   /* Wake up the media well, as that takes a lot less
+* power than the Render well. */
+   intel_uncore_forcewake_get(dev_priv, FORCEWAKE_MEDIA);
+   valleyview_set_rps(dev_priv-dev, val);
+   intel_uncore_forcewake_get(dev_priv, FORCEWAKE_MEDIA);

_put

With that fixed this is:
Reviewed-by: Ville Syrjälä ville.syrj...@linux.intel.com


Oops :)  Copy paste problem :)


  }
  
  void gen6_rps_busy(struct drm_i915_private *dev_priv)

--
1.9.1


___
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx