Re: [Intel-gfx] HDMI monitor hot remove handling
On Mon, Nov 14, 2011 at 10:05:05AM +0800, Zhenyu Wang wrote: > On 2011.11.11 16:50:41 +0800, Wu Fengguang wrote: > > > > > I still think you should do those in hot_plug(), to call detect() for > > > > > current > > > > > status, write eld and set specific audio enable/disable bit for all > > > > > audio stuff. > > > > > Just my sense, you may send RFC patch for other's comment. > > > > > yeah, mode_set() will only be in normal mode setting path and taking > > > current > > > monitor's audio capability, but not on hot removal path. And if > > > connector's DPMS off, > > > does audio need to care? I think no, as user might still like to hear > > > sound, right? ;) > > > > > > So looks currently nobody cares for hot removal, you need to set that by > > > yourself somewhere. > > > > Zhenyu, according to your comments, here is the patch, tested OK on > > HDMI :) DP not tested yet. > > Well, I don't think I suggested a new hook for hot removal. ;) Yes, sorry. > You know that hot_plug() hook is intel encoder thing, which is the place > I think you can do audio config stuff. The problem is, ->hot_plug() is called at the very beginning, before ->detect() is called. If doing the hot remove notifications in ->hot_plug(), the patch will add an _extra_ loop to call into ->detect(). Why not insert the functionalities somewhere after ->detect() is called and we already know it's a hot removal event? That avoids adding duplicate ->detect() calls. Thanks, Fengguang > > > > This notifies the audio driver of the HDMI/DP monitor hot removal > > event. > > > > - clear SDVO_AUDIO_ENABLE/DP_AUDIO_OUTPUT_ENABLE > > - clear ELD Valid bit > > > > Signed-off-by: Wu Fengguang > > --- > > drivers/gpu/drm/drm_crtc_helper.c |4 > > drivers/gpu/drm/i915/intel_dp.c | 19 +++ > > drivers/gpu/drm/i915/intel_drv.h |4 > > drivers/gpu/drm/i915/intel_hdmi.c | 17 + > > include/drm/drm_crtc.h|1 + > > 5 files changed, 45 insertions(+) > > > > --- linux.orig/drivers/gpu/drm/i915/intel_dp.c 2011-11-11 > > 16:42:58.0 +0800 > > +++ linux/drivers/gpu/drm/i915/intel_dp.c 2011-11-11 16:42:59.0 > > +0800 > > @@ -1984,6 +1984,24 @@ intel_dp_detect(struct drm_connector *co > > return connector_status_connected; > > } > > > > +static void intel_dp_hot_remove(struct drm_connector *connector) > > +{ > > + struct intel_dp *intel_dp = intel_attached_dp(connector); > > + struct drm_device *dev = intel_dp->base.base.dev; > > + struct drm_i915_private *dev_priv = dev->dev_private; > > + struct drm_crtc *crtc = intel_dp->base.base.crtc; > > + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); > > + > > + intel_dp->DP &= ~DP_AUDIO_OUTPUT_ENABLE; > > + I915_WRITE(intel_dp->output_reg, intel_dp->DP); > > + POSTING_READ(intel_dp->output_reg); > > + intel_wait_for_vblank(dev, intel_crtc->pipe); > > + > > + connector->eld[0] = 0; > > + if (dev_priv->display.write_eld) > > + dev_priv->display.write_eld(connector, crtc); > > +} > > + > > static int intel_dp_get_modes(struct drm_connector *connector) > > { > > struct intel_dp *intel_dp = intel_attached_dp(connector); > > @@ -2143,6 +2161,7 @@ static const struct drm_connector_funcs > > .detect = intel_dp_detect, > > .fill_modes = drm_helper_probe_single_connector_modes, > > .set_property = intel_dp_set_property, > > + .hot_remove = intel_dp_hot_remove, > > .destroy = intel_dp_destroy, > > }; > > > > --- linux.orig/drivers/gpu/drm/i915/intel_drv.h 2011-11-11 > > 16:42:58.0 +0800 > > +++ linux/drivers/gpu/drm/i915/intel_drv.h 2011-11-11 16:42:59.0 > > +0800 > > @@ -382,6 +382,10 @@ extern void intel_fb_restore_mode(struct > > extern void intel_init_clock_gating(struct drm_device *dev); > > extern void intel_write_eld(struct drm_encoder *encoder, > > struct drm_display_mode *mode); > > +extern void intel_hotplug_status(struct drm_device *dev, > > + struct drm_connector *connector, > > + struct drm_crtc *crtc, > > + enum drm_connector_status status); > > extern void intel_cpt_verify_modeset(struct drm_device *dev, int pipe); > > > > #endif /* __INTEL_DRV_H__ */ > > --- linux.orig/drivers/gpu/drm/i915/intel_hdmi.c2011-11-11 > > 16:42:58.0 +0800 > > +++ linux/drivers/gpu/drm/i915/intel_hdmi.c 2011-11-11 16:42:59.0 > > +0800 > > @@ -352,6 +352,22 @@ intel_hdmi_detect(struct drm_connector * > > return status; > > } > > > > +static void intel_hdmi_hot_remove(struct drm_connector *connector) > > +{ > > + struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector); > > + struct drm_i915_private *dev_priv = connector->dev->dev_private; > > + u32 temp; > > + > > + temp = I915_READ(intel_hdmi->sdvox_reg); > > + I915_WRITE(intel_hdmi->sdvox_reg, temp & ~SDVO_AUDIO_ENABLE); > > + POSTING_READ(in
Re: [Intel-gfx] HDMI monitor hot remove handling
On 2011.11.11 16:50:41 +0800, Wu Fengguang wrote: > > > > I still think you should do those in hot_plug(), to call detect() for > > > > current > > > > status, write eld and set specific audio enable/disable bit for all > > > > audio stuff. > > > > Just my sense, you may send RFC patch for other's comment. > > > yeah, mode_set() will only be in normal mode setting path and taking current > > monitor's audio capability, but not on hot removal path. And if connector's > > DPMS off, > > does audio need to care? I think no, as user might still like to hear > > sound, right? ;) > > > > So looks currently nobody cares for hot removal, you need to set that by > > yourself somewhere. > > Zhenyu, according to your comments, here is the patch, tested OK on > HDMI :) DP not tested yet. Well, I don't think I suggested a new hook for hot removal. ;) You know that hot_plug() hook is intel encoder thing, which is the place I think you can do audio config stuff. > > This notifies the audio driver of the HDMI/DP monitor hot removal > event. > > - clear SDVO_AUDIO_ENABLE/DP_AUDIO_OUTPUT_ENABLE > - clear ELD Valid bit > > Signed-off-by: Wu Fengguang > --- > drivers/gpu/drm/drm_crtc_helper.c |4 > drivers/gpu/drm/i915/intel_dp.c | 19 +++ > drivers/gpu/drm/i915/intel_drv.h |4 > drivers/gpu/drm/i915/intel_hdmi.c | 17 + > include/drm/drm_crtc.h|1 + > 5 files changed, 45 insertions(+) > > --- linux.orig/drivers/gpu/drm/i915/intel_dp.c2011-11-11 > 16:42:58.0 +0800 > +++ linux/drivers/gpu/drm/i915/intel_dp.c 2011-11-11 16:42:59.0 > +0800 > @@ -1984,6 +1984,24 @@ intel_dp_detect(struct drm_connector *co > return connector_status_connected; > } > > +static void intel_dp_hot_remove(struct drm_connector *connector) > +{ > + struct intel_dp *intel_dp = intel_attached_dp(connector); > + struct drm_device *dev = intel_dp->base.base.dev; > + struct drm_i915_private *dev_priv = dev->dev_private; > + struct drm_crtc *crtc = intel_dp->base.base.crtc; > + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); > + > + intel_dp->DP &= ~DP_AUDIO_OUTPUT_ENABLE; > + I915_WRITE(intel_dp->output_reg, intel_dp->DP); > + POSTING_READ(intel_dp->output_reg); > + intel_wait_for_vblank(dev, intel_crtc->pipe); > + > + connector->eld[0] = 0; > + if (dev_priv->display.write_eld) > + dev_priv->display.write_eld(connector, crtc); > +} > + > static int intel_dp_get_modes(struct drm_connector *connector) > { > struct intel_dp *intel_dp = intel_attached_dp(connector); > @@ -2143,6 +2161,7 @@ static const struct drm_connector_funcs > .detect = intel_dp_detect, > .fill_modes = drm_helper_probe_single_connector_modes, > .set_property = intel_dp_set_property, > + .hot_remove = intel_dp_hot_remove, > .destroy = intel_dp_destroy, > }; > > --- linux.orig/drivers/gpu/drm/i915/intel_drv.h 2011-11-11 > 16:42:58.0 +0800 > +++ linux/drivers/gpu/drm/i915/intel_drv.h2011-11-11 16:42:59.0 > +0800 > @@ -382,6 +382,10 @@ extern void intel_fb_restore_mode(struct > extern void intel_init_clock_gating(struct drm_device *dev); > extern void intel_write_eld(struct drm_encoder *encoder, > struct drm_display_mode *mode); > +extern void intel_hotplug_status(struct drm_device *dev, > + struct drm_connector *connector, > + struct drm_crtc *crtc, > + enum drm_connector_status status); > extern void intel_cpt_verify_modeset(struct drm_device *dev, int pipe); > > #endif /* __INTEL_DRV_H__ */ > --- linux.orig/drivers/gpu/drm/i915/intel_hdmi.c 2011-11-11 > 16:42:58.0 +0800 > +++ linux/drivers/gpu/drm/i915/intel_hdmi.c 2011-11-11 16:42:59.0 > +0800 > @@ -352,6 +352,22 @@ intel_hdmi_detect(struct drm_connector * > return status; > } > > +static void intel_hdmi_hot_remove(struct drm_connector *connector) > +{ > + struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector); > + struct drm_i915_private *dev_priv = connector->dev->dev_private; > + u32 temp; > + > + temp = I915_READ(intel_hdmi->sdvox_reg); > + I915_WRITE(intel_hdmi->sdvox_reg, temp & ~SDVO_AUDIO_ENABLE); > + POSTING_READ(intel_hdmi->sdvox_reg); > + > + connector->eld[0] = 0; > + if (dev_priv->display.write_eld) > + dev_priv->display.write_eld(connector, > + intel_hdmi->base.base.crtc); > +} > + > static int intel_hdmi_get_modes(struct drm_connector *connector) > { > struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector); > @@ -461,6 +477,7 @@ static const struct drm_connector_funcs > .detect = intel_hdmi_detect, > .fill_modes = drm_helper_probe_single_connector_modes, > .set_property = intel_hdmi_set_property, > + .hot_remove = in
Re: [Intel-gfx] HDMI monitor hot remove handling
> > > I still think you should do those in hot_plug(), to call detect() for > > > current > > > status, write eld and set specific audio enable/disable bit for all audio > > > stuff. > > > Just my sense, you may send RFC patch for other's comment. > yeah, mode_set() will only be in normal mode setting path and taking current > monitor's audio capability, but not on hot removal path. And if connector's > DPMS off, > does audio need to care? I think no, as user might still like to hear sound, > right? ;) > > So looks currently nobody cares for hot removal, you need to set that by > yourself somewhere. Zhenyu, according to your comments, here is the patch, tested OK on HDMI :) DP not tested yet. This notifies the audio driver of the HDMI/DP monitor hot removal event. - clear SDVO_AUDIO_ENABLE/DP_AUDIO_OUTPUT_ENABLE - clear ELD Valid bit Signed-off-by: Wu Fengguang --- drivers/gpu/drm/drm_crtc_helper.c |4 drivers/gpu/drm/i915/intel_dp.c | 19 +++ drivers/gpu/drm/i915/intel_drv.h |4 drivers/gpu/drm/i915/intel_hdmi.c | 17 + include/drm/drm_crtc.h|1 + 5 files changed, 45 insertions(+) --- linux.orig/drivers/gpu/drm/i915/intel_dp.c 2011-11-11 16:42:58.0 +0800 +++ linux/drivers/gpu/drm/i915/intel_dp.c 2011-11-11 16:42:59.0 +0800 @@ -1984,6 +1984,24 @@ intel_dp_detect(struct drm_connector *co return connector_status_connected; } +static void intel_dp_hot_remove(struct drm_connector *connector) +{ + struct intel_dp *intel_dp = intel_attached_dp(connector); + struct drm_device *dev = intel_dp->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = intel_dp->base.base.crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + intel_dp->DP &= ~DP_AUDIO_OUTPUT_ENABLE; + I915_WRITE(intel_dp->output_reg, intel_dp->DP); + POSTING_READ(intel_dp->output_reg); + intel_wait_for_vblank(dev, intel_crtc->pipe); + + connector->eld[0] = 0; + if (dev_priv->display.write_eld) + dev_priv->display.write_eld(connector, crtc); +} + static int intel_dp_get_modes(struct drm_connector *connector) { struct intel_dp *intel_dp = intel_attached_dp(connector); @@ -2143,6 +2161,7 @@ static const struct drm_connector_funcs .detect = intel_dp_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = intel_dp_set_property, + .hot_remove = intel_dp_hot_remove, .destroy = intel_dp_destroy, }; --- linux.orig/drivers/gpu/drm/i915/intel_drv.h 2011-11-11 16:42:58.0 +0800 +++ linux/drivers/gpu/drm/i915/intel_drv.h 2011-11-11 16:42:59.0 +0800 @@ -382,6 +382,10 @@ extern void intel_fb_restore_mode(struct extern void intel_init_clock_gating(struct drm_device *dev); extern void intel_write_eld(struct drm_encoder *encoder, struct drm_display_mode *mode); +extern void intel_hotplug_status(struct drm_device *dev, + struct drm_connector *connector, + struct drm_crtc *crtc, + enum drm_connector_status status); extern void intel_cpt_verify_modeset(struct drm_device *dev, int pipe); #endif /* __INTEL_DRV_H__ */ --- linux.orig/drivers/gpu/drm/i915/intel_hdmi.c2011-11-11 16:42:58.0 +0800 +++ linux/drivers/gpu/drm/i915/intel_hdmi.c 2011-11-11 16:42:59.0 +0800 @@ -352,6 +352,22 @@ intel_hdmi_detect(struct drm_connector * return status; } +static void intel_hdmi_hot_remove(struct drm_connector *connector) +{ + struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector); + struct drm_i915_private *dev_priv = connector->dev->dev_private; + u32 temp; + + temp = I915_READ(intel_hdmi->sdvox_reg); + I915_WRITE(intel_hdmi->sdvox_reg, temp & ~SDVO_AUDIO_ENABLE); + POSTING_READ(intel_hdmi->sdvox_reg); + + connector->eld[0] = 0; + if (dev_priv->display.write_eld) + dev_priv->display.write_eld(connector, + intel_hdmi->base.base.crtc); +} + static int intel_hdmi_get_modes(struct drm_connector *connector) { struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector); @@ -461,6 +477,7 @@ static const struct drm_connector_funcs .detect = intel_hdmi_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = intel_hdmi_set_property, + .hot_remove = intel_hdmi_hot_remove, .destroy = intel_hdmi_destroy, }; --- linux.orig/drivers/gpu/drm/drm_crtc_helper.c2011-11-11 16:42:58.0 +0800 +++ linux/drivers/gpu/drm/drm_crtc_helper.c 2011-11-11 16:42:59.0 +0800 @@ -907,6 +907,10 @@ static void output_poll_execute(struct w old_status, connector->status); if (o