Re: [PATCH v5 2/2] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
On Fri 30 Oct 19:38 CDT 2020, John Stultz wrote: > Allow the qcom_scm driver to be loadable as a permenent module. > > This still uses the "depends on QCOM_SCM || !QCOM_SCM" bit to > ensure that drivers that call into the qcom_scm driver are > also built as modules. While not ideal in some cases its the > only safe way I can find to avoid build errors without having > those drivers select QCOM_SCM and have to force it on (as > QCOM_SCM=n can be valid for those drivers). > > Cc: Catalin Marinas > Cc: Will Deacon > Cc: Andy Gross > Cc: Bjorn Andersson > Cc: Joerg Roedel > Cc: Thomas Gleixner > Cc: Jason Cooper > Cc: Marc Zyngier > Cc: Linus Walleij > Cc: Vinod Koul > Cc: Kalle Valo > Cc: Maulik Shah > Cc: Lina Iyer > Cc: Saravana Kannan > Cc: Todd Kjos > Cc: Greg Kroah-Hartman > Cc: linux-arm-...@vger.kernel.org > Cc: iommu@lists.linux-foundation.org > Cc: linux-g...@vger.kernel.org > Acked-by: Greg Kroah-Hartman > Signed-off-by: John Stultz Reviewed-by: Bjorn Andersson Regards, Bjorn > --- > v3: > * Fix __arm_smccc_smc build issue reported by > kernel test robot > v4: > * Add "depends on QCOM_SCM || !QCOM_SCM" bit to ath10k > config that requires it. > v5: > * Fix QCOM_QCM typo in Kconfig, it should be QCOM_SCM > --- > drivers/firmware/Kconfig| 4 ++-- > drivers/firmware/Makefile | 3 ++- > drivers/firmware/qcom_scm.c | 4 > drivers/iommu/Kconfig | 2 ++ > drivers/net/wireless/ath/ath10k/Kconfig | 1 + > 5 files changed, 11 insertions(+), 3 deletions(-) > > diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig > index 3315e3c215864..5e369928bc567 100644 > --- a/drivers/firmware/Kconfig > +++ b/drivers/firmware/Kconfig > @@ -235,8 +235,8 @@ config INTEL_STRATIX10_RSU > Say Y here if you want Intel RSU support. > > config QCOM_SCM > - bool > - depends on ARM || ARM64 > + tristate "Qcom SCM driver" > + depends on (ARM && HAVE_ARM_SMCCC) || ARM64 > select RESET_CONTROLLER > > config QCOM_SCM_DOWNLOAD_MODE_DEFAULT > diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile > index 5e013b6a3692e..523173cbff335 100644 > --- a/drivers/firmware/Makefile > +++ b/drivers/firmware/Makefile > @@ -17,7 +17,8 @@ obj-$(CONFIG_ISCSI_IBFT)+= iscsi_ibft.o > obj-$(CONFIG_FIRMWARE_MEMMAP)+= memmap.o > obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o > obj-$(CONFIG_FW_CFG_SYSFS) += qemu_fw_cfg.o > -obj-$(CONFIG_QCOM_SCM) += qcom_scm.o qcom_scm-smc.o > qcom_scm-legacy.o > +obj-$(CONFIG_QCOM_SCM) += qcom-scm.o > +qcom-scm-objs += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o > obj-$(CONFIG_TI_SCI_PROTOCOL)+= ti_sci.o > obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o > obj-$(CONFIG_TURRIS_MOX_RWTM)+= turris-mox-rwtm.o > diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c > index 7be48c1bec96d..6f431b73e617d 100644 > --- a/drivers/firmware/qcom_scm.c > +++ b/drivers/firmware/qcom_scm.c > @@ -1280,6 +1280,7 @@ static const struct of_device_id qcom_scm_dt_match[] = { > { .compatible = "qcom,scm" }, > {} > }; > +MODULE_DEVICE_TABLE(of, qcom_scm_dt_match); > > static struct platform_driver qcom_scm_driver = { > .driver = { > @@ -1295,3 +1296,6 @@ static int __init qcom_scm_init(void) > return platform_driver_register(&qcom_scm_driver); > } > subsys_initcall(qcom_scm_init); > + > +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. SCM driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig > index 04878caf6da49..c64d7a2b65134 100644 > --- a/drivers/iommu/Kconfig > +++ b/drivers/iommu/Kconfig > @@ -248,6 +248,7 @@ config SPAPR_TCE_IOMMU > config ARM_SMMU > tristate "ARM Ltd. System MMU (SMMU) Support" > depends on ARM64 || ARM || (COMPILE_TEST && !GENERIC_ATOMIC64) > + depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y > select IOMMU_API > select IOMMU_IO_PGTABLE_LPAE > select ARM_DMA_USE_IOMMU if ARM > @@ -375,6 +376,7 @@ config QCOM_IOMMU > # Note: iommu drivers cannot (yet?) be built as modules > bool "Qualcomm IOMMU Support" > depends on ARCH_QCOM || (COMPILE_TEST && !GENERIC_ATOMIC64) > + depends on QCOM_SCM=y > select IOMMU_API > select IOMMU_IO_PGTABLE_LPAE > select ARM_DMA_USE_IOMMU > diff --git a/drivers/net/wireless/ath/ath10k/Kconfig > b/drivers/net/wireless/ath/ath10k/Kconfig > index 40f91bc8514d8..741289e385d59 100644 > --- a/drivers/net/wireless/ath/ath10k/Kconfig > +++ b/drivers/net/wireless/ath/ath10k/Kconfig > @@ -44,6 +44,7 @@ config ATH10K_SNOC > tristate "Qualcomm ath10k SNOC support" > depends on ATH10K > depends on ARCH_QCOM || COMPILE_TEST > + depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y > select QCOM_QMI_HELPERS > help > This module adds support for in
Re: [PATCH v5 2/2] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
+ ath10k list John Stultz writes: > Allow the qcom_scm driver to be loadable as a permenent module. > > This still uses the "depends on QCOM_SCM || !QCOM_SCM" bit to > ensure that drivers that call into the qcom_scm driver are > also built as modules. While not ideal in some cases its the > only safe way I can find to avoid build errors without having > those drivers select QCOM_SCM and have to force it on (as > QCOM_SCM=n can be valid for those drivers). > > Cc: Catalin Marinas > Cc: Will Deacon > Cc: Andy Gross > Cc: Bjorn Andersson > Cc: Joerg Roedel > Cc: Thomas Gleixner > Cc: Jason Cooper > Cc: Marc Zyngier > Cc: Linus Walleij > Cc: Vinod Koul > Cc: Kalle Valo > Cc: Maulik Shah > Cc: Lina Iyer > Cc: Saravana Kannan > Cc: Todd Kjos > Cc: Greg Kroah-Hartman > Cc: linux-arm-...@vger.kernel.org > Cc: iommu@lists.linux-foundation.org > Cc: linux-g...@vger.kernel.org > Acked-by: Greg Kroah-Hartman > Signed-off-by: John Stultz > --- > v3: > * Fix __arm_smccc_smc build issue reported by > kernel test robot > v4: > * Add "depends on QCOM_SCM || !QCOM_SCM" bit to ath10k > config that requires it. > v5: > * Fix QCOM_QCM typo in Kconfig, it should be QCOM_SCM > --- > drivers/firmware/Kconfig| 4 ++-- > drivers/firmware/Makefile | 3 ++- > drivers/firmware/qcom_scm.c | 4 > drivers/iommu/Kconfig | 2 ++ > drivers/net/wireless/ath/ath10k/Kconfig | 1 + > 5 files changed, 11 insertions(+), 3 deletions(-) For ath10k part: Acked-by: Kalle Valo -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
[PATCH v5 2/2] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module
Allow the qcom_scm driver to be loadable as a permenent module. This still uses the "depends on QCOM_SCM || !QCOM_SCM" bit to ensure that drivers that call into the qcom_scm driver are also built as modules. While not ideal in some cases its the only safe way I can find to avoid build errors without having those drivers select QCOM_SCM and have to force it on (as QCOM_SCM=n can be valid for those drivers). Cc: Catalin Marinas Cc: Will Deacon Cc: Andy Gross Cc: Bjorn Andersson Cc: Joerg Roedel Cc: Thomas Gleixner Cc: Jason Cooper Cc: Marc Zyngier Cc: Linus Walleij Cc: Vinod Koul Cc: Kalle Valo Cc: Maulik Shah Cc: Lina Iyer Cc: Saravana Kannan Cc: Todd Kjos Cc: Greg Kroah-Hartman Cc: linux-arm-...@vger.kernel.org Cc: iommu@lists.linux-foundation.org Cc: linux-g...@vger.kernel.org Acked-by: Greg Kroah-Hartman Signed-off-by: John Stultz --- v3: * Fix __arm_smccc_smc build issue reported by kernel test robot v4: * Add "depends on QCOM_SCM || !QCOM_SCM" bit to ath10k config that requires it. v5: * Fix QCOM_QCM typo in Kconfig, it should be QCOM_SCM --- drivers/firmware/Kconfig| 4 ++-- drivers/firmware/Makefile | 3 ++- drivers/firmware/qcom_scm.c | 4 drivers/iommu/Kconfig | 2 ++ drivers/net/wireless/ath/ath10k/Kconfig | 1 + 5 files changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 3315e3c215864..5e369928bc567 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -235,8 +235,8 @@ config INTEL_STRATIX10_RSU Say Y here if you want Intel RSU support. config QCOM_SCM - bool - depends on ARM || ARM64 + tristate "Qcom SCM driver" + depends on (ARM && HAVE_ARM_SMCCC) || ARM64 select RESET_CONTROLLER config QCOM_SCM_DOWNLOAD_MODE_DEFAULT diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 5e013b6a3692e..523173cbff335 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -17,7 +17,8 @@ obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o obj-$(CONFIG_FW_CFG_SYSFS) += qemu_fw_cfg.o -obj-$(CONFIG_QCOM_SCM) += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o +obj-$(CONFIG_QCOM_SCM) += qcom-scm.o +qcom-scm-objs += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o obj-$(CONFIG_TURRIS_MOX_RWTM) += turris-mox-rwtm.o diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c index 7be48c1bec96d..6f431b73e617d 100644 --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c @@ -1280,6 +1280,7 @@ static const struct of_device_id qcom_scm_dt_match[] = { { .compatible = "qcom,scm" }, {} }; +MODULE_DEVICE_TABLE(of, qcom_scm_dt_match); static struct platform_driver qcom_scm_driver = { .driver = { @@ -1295,3 +1296,6 @@ static int __init qcom_scm_init(void) return platform_driver_register(&qcom_scm_driver); } subsys_initcall(qcom_scm_init); + +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. SCM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index 04878caf6da49..c64d7a2b65134 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -248,6 +248,7 @@ config SPAPR_TCE_IOMMU config ARM_SMMU tristate "ARM Ltd. System MMU (SMMU) Support" depends on ARM64 || ARM || (COMPILE_TEST && !GENERIC_ATOMIC64) + depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y select IOMMU_API select IOMMU_IO_PGTABLE_LPAE select ARM_DMA_USE_IOMMU if ARM @@ -375,6 +376,7 @@ config QCOM_IOMMU # Note: iommu drivers cannot (yet?) be built as modules bool "Qualcomm IOMMU Support" depends on ARCH_QCOM || (COMPILE_TEST && !GENERIC_ATOMIC64) + depends on QCOM_SCM=y select IOMMU_API select IOMMU_IO_PGTABLE_LPAE select ARM_DMA_USE_IOMMU diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig index 40f91bc8514d8..741289e385d59 100644 --- a/drivers/net/wireless/ath/ath10k/Kconfig +++ b/drivers/net/wireless/ath/ath10k/Kconfig @@ -44,6 +44,7 @@ config ATH10K_SNOC tristate "Qualcomm ath10k SNOC support" depends on ATH10K depends on ARCH_QCOM || COMPILE_TEST + depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y select QCOM_QMI_HELPERS help This module adds support for integrated WCN3990 chip connected -- 2.17.1 ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu