Re: [RESEND PATCH v17 5/5] iommu/arm-smmu: Add support for qcom,smmu-v2 variant
Hi Thor, On 11/26/2018 8:11 PM, Thor Thayer wrote: Hi Vivek, On 11/26/18 4:55 AM, Vivek Gautam wrote: On 11/24/2018 12:04 AM, Will Deacon wrote: On Fri, Nov 23, 2018 at 03:06:29PM +0530, Vivek Gautam wrote: On Fri, Nov 23, 2018 at 2:52 PM Tomasz Figa wrote: On Fri, Nov 23, 2018 at 6:13 PM Vivek Gautam wrote: On Wed, Nov 21, 2018 at 11:09 PM Will Deacon wrote: On Fri, Nov 16, 2018 at 04:54:30PM +0530, Vivek Gautam wrote: @@ -2026,6 +2027,17 @@ ARM_SMMU_MATCH_DATA(arm_mmu401, ARM_SMMU_V1_64K, GENERIC_SMMU); ARM_SMMU_MATCH_DATA(arm_mmu500, ARM_SMMU_V2, ARM_MMU500); ARM_SMMU_MATCH_DATA(cavium_smmuv2, ARM_SMMU_V2, CAVIUM_SMMUV2); +static const char * const qcom_smmuv2_clks[] = { + "bus", "iface", +}; + +static const struct arm_smmu_match_data qcom_smmuv2 = { + .version = ARM_SMMU_V2, + .model = QCOM_SMMUV2, + .clks = qcom_smmuv2_clks, + .num_clks = ARRAY_SIZE(qcom_smmuv2_clks), +}; These seems redundant if we go down the route proposed by Thor, where we just pull all of the clocks out of the device-tree. In which case, why do we need this match_data at all? Which is better? Driver relying solely on the device tree to tell which all clocks are required to be enabled, or, the driver deciding itself based on the platform's match data, that it should have X, Y, & Z clocks that should be supplied from the device tree. The former would simplify the driver, but would also make it impossible to spot mistakes in DT, which would ultimately surface out as very hard to debug bugs (likely complete system lockups). Thanks. Yea, this is how I understand things presently. Relying on device tree puts the things out of driver's control. But it also has the undesirable effect of having to update the driver code whenever we want to add support for a new SMMU implementation. If we do this all in the DT, as Thor is trying to do, then older kernels will work well with new hardware. Hi Will, Am I unable to understand the intentions here for Thor's clock-fetch design change? I'm having trouble parsing your question, sorry. Please work with Thor so that we have a single way to get the clock information. My preference is to take it from the firmware, for the reason I stated above. Hi Will, Sure, thanks. I will work with Thor to get this going. Hi Thor, Does it sound okay to you to squash your patch [1] into my patch [2] with your 'Signed-off-by' tag? I will update the commit log to include the information about getting clock details from device tree. [1] https://patchwork.kernel.org/patch/10628725/ [2] https://patchwork.kernel.org/patch/10686061/ Yes, that would be great and easier to understand than my patch on top of yours. Additionally, can you remove the "Error:" as Will requested as part of the squash? Thanks for your consent. I have reworked the patch today, and have addressed Will's comment. I will give a try on the board and post it by tomorrow. Best regards Vivek Thank you! Thor Best regards Vivek Will ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [RESEND PATCH v17 5/5] iommu/arm-smmu: Add support for qcom,smmu-v2 variant
Hi Vivek, On 11/26/18 4:55 AM, Vivek Gautam wrote: On 11/24/2018 12:04 AM, Will Deacon wrote: On Fri, Nov 23, 2018 at 03:06:29PM +0530, Vivek Gautam wrote: On Fri, Nov 23, 2018 at 2:52 PM Tomasz Figa wrote: On Fri, Nov 23, 2018 at 6:13 PM Vivek Gautam wrote: On Wed, Nov 21, 2018 at 11:09 PM Will Deacon wrote: On Fri, Nov 16, 2018 at 04:54:30PM +0530, Vivek Gautam wrote: @@ -2026,6 +2027,17 @@ ARM_SMMU_MATCH_DATA(arm_mmu401, ARM_SMMU_V1_64K, GENERIC_SMMU); ARM_SMMU_MATCH_DATA(arm_mmu500, ARM_SMMU_V2, ARM_MMU500); ARM_SMMU_MATCH_DATA(cavium_smmuv2, ARM_SMMU_V2, CAVIUM_SMMUV2); +static const char * const qcom_smmuv2_clks[] = { + "bus", "iface", +}; + +static const struct arm_smmu_match_data qcom_smmuv2 = { + .version = ARM_SMMU_V2, + .model = QCOM_SMMUV2, + .clks = qcom_smmuv2_clks, + .num_clks = ARRAY_SIZE(qcom_smmuv2_clks), +}; These seems redundant if we go down the route proposed by Thor, where we just pull all of the clocks out of the device-tree. In which case, why do we need this match_data at all? Which is better? Driver relying solely on the device tree to tell which all clocks are required to be enabled, or, the driver deciding itself based on the platform's match data, that it should have X, Y, & Z clocks that should be supplied from the device tree. The former would simplify the driver, but would also make it impossible to spot mistakes in DT, which would ultimately surface out as very hard to debug bugs (likely complete system lockups). Thanks. Yea, this is how I understand things presently. Relying on device tree puts the things out of driver's control. But it also has the undesirable effect of having to update the driver code whenever we want to add support for a new SMMU implementation. If we do this all in the DT, as Thor is trying to do, then older kernels will work well with new hardware. Hi Will, Am I unable to understand the intentions here for Thor's clock-fetch design change? I'm having trouble parsing your question, sorry. Please work with Thor so that we have a single way to get the clock information. My preference is to take it from the firmware, for the reason I stated above. Hi Will, Sure, thanks. I will work with Thor to get this going. Hi Thor, Does it sound okay to you to squash your patch [1] into my patch [2] with your 'Signed-off-by' tag? I will update the commit log to include the information about getting clock details from device tree. [1] https://patchwork.kernel.org/patch/10628725/ [2] https://patchwork.kernel.org/patch/10686061/ Yes, that would be great and easier to understand than my patch on top of yours. Additionally, can you remove the "Error:" as Will requested as part of the squash? Thank you! Thor Best regards Vivek Will ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [RESEND PATCH v17 5/5] iommu/arm-smmu: Add support for qcom,smmu-v2 variant
On 11/24/2018 12:04 AM, Will Deacon wrote: On Fri, Nov 23, 2018 at 03:06:29PM +0530, Vivek Gautam wrote: On Fri, Nov 23, 2018 at 2:52 PM Tomasz Figa wrote: On Fri, Nov 23, 2018 at 6:13 PM Vivek Gautam wrote: On Wed, Nov 21, 2018 at 11:09 PM Will Deacon wrote: On Fri, Nov 16, 2018 at 04:54:30PM +0530, Vivek Gautam wrote: @@ -2026,6 +2027,17 @@ ARM_SMMU_MATCH_DATA(arm_mmu401, ARM_SMMU_V1_64K, GENERIC_SMMU); ARM_SMMU_MATCH_DATA(arm_mmu500, ARM_SMMU_V2, ARM_MMU500); ARM_SMMU_MATCH_DATA(cavium_smmuv2, ARM_SMMU_V2, CAVIUM_SMMUV2); +static const char * const qcom_smmuv2_clks[] = { + "bus", "iface", +}; + +static const struct arm_smmu_match_data qcom_smmuv2 = { + .version = ARM_SMMU_V2, + .model = QCOM_SMMUV2, + .clks = qcom_smmuv2_clks, + .num_clks = ARRAY_SIZE(qcom_smmuv2_clks), +}; These seems redundant if we go down the route proposed by Thor, where we just pull all of the clocks out of the device-tree. In which case, why do we need this match_data at all? Which is better? Driver relying solely on the device tree to tell which all clocks are required to be enabled, or, the driver deciding itself based on the platform's match data, that it should have X, Y, & Z clocks that should be supplied from the device tree. The former would simplify the driver, but would also make it impossible to spot mistakes in DT, which would ultimately surface out as very hard to debug bugs (likely complete system lockups). Thanks. Yea, this is how I understand things presently. Relying on device tree puts the things out of driver's control. But it also has the undesirable effect of having to update the driver code whenever we want to add support for a new SMMU implementation. If we do this all in the DT, as Thor is trying to do, then older kernels will work well with new hardware. Hi Will, Am I unable to understand the intentions here for Thor's clock-fetch design change? I'm having trouble parsing your question, sorry. Please work with Thor so that we have a single way to get the clock information. My preference is to take it from the firmware, for the reason I stated above. Hi Will, Sure, thanks. I will work with Thor to get this going. Hi Thor, Does it sound okay to you to squash your patch [1] into my patch [2] with your 'Signed-off-by' tag? I will update the commit log to include the information about getting clock details from device tree. [1] https://patchwork.kernel.org/patch/10628725/ [2] https://patchwork.kernel.org/patch/10686061/ Best regards Vivek Will ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [RESEND PATCH v17 5/5] iommu/arm-smmu: Add support for qcom,smmu-v2 variant
On Sat, Nov 24, 2018 at 3:34 AM Will Deacon wrote: > > On Fri, Nov 23, 2018 at 03:06:29PM +0530, Vivek Gautam wrote: > > On Fri, Nov 23, 2018 at 2:52 PM Tomasz Figa wrote: > > > On Fri, Nov 23, 2018 at 6:13 PM Vivek Gautam > > > wrote: > > > > On Wed, Nov 21, 2018 at 11:09 PM Will Deacon > > > > wrote: > > > > > On Fri, Nov 16, 2018 at 04:54:30PM +0530, Vivek Gautam wrote: > > > > > > @@ -2026,6 +2027,17 @@ ARM_SMMU_MATCH_DATA(arm_mmu401, > > > > > > ARM_SMMU_V1_64K, GENERIC_SMMU); > > > > > > ARM_SMMU_MATCH_DATA(arm_mmu500, ARM_SMMU_V2, ARM_MMU500); > > > > > > ARM_SMMU_MATCH_DATA(cavium_smmuv2, ARM_SMMU_V2, CAVIUM_SMMUV2); > > > > > > > > > > > > +static const char * const qcom_smmuv2_clks[] = { > > > > > > + "bus", "iface", > > > > > > +}; > > > > > > + > > > > > > +static const struct arm_smmu_match_data qcom_smmuv2 = { > > > > > > + .version = ARM_SMMU_V2, > > > > > > + .model = QCOM_SMMUV2, > > > > > > + .clks = qcom_smmuv2_clks, > > > > > > + .num_clks = ARRAY_SIZE(qcom_smmuv2_clks), > > > > > > +}; > > > > > > > > > > These seems redundant if we go down the route proposed by Thor, where > > > > > we > > > > > just pull all of the clocks out of the device-tree. In which case, why > > > > > do we need this match_data at all? > > > > > > > > Which is better? Driver relying solely on the device tree to tell > > > > which all clocks > > > > are required to be enabled, > > > > or, the driver deciding itself based on the platform's match data, > > > > that it should > > > > have X, Y, & Z clocks that should be supplied from the device tree. > > > > > > The former would simplify the driver, but would also make it > > > impossible to spot mistakes in DT, which would ultimately surface out > > > as very hard to debug bugs (likely complete system lockups). > > > > Thanks. > > Yea, this is how I understand things presently. Relying on device tree > > puts the things out of driver's control. > > But it also has the undesirable effect of having to update the driver > code whenever we want to add support for a new SMMU implementation. If > we do this all in the DT, as Thor is trying to do, then older kernels > will work well with new hardware. Fair enough, if you're okay with that. Obviously one would still have to change the DT bindings to list the exact set of clocks for the new hardware variant, unless the convention changed recently. Best regards, Tomasz ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [RESEND PATCH v17 5/5] iommu/arm-smmu: Add support for qcom,smmu-v2 variant
On Fri, Nov 23, 2018 at 03:06:29PM +0530, Vivek Gautam wrote: > On Fri, Nov 23, 2018 at 2:52 PM Tomasz Figa wrote: > > On Fri, Nov 23, 2018 at 6:13 PM Vivek Gautam > > wrote: > > > On Wed, Nov 21, 2018 at 11:09 PM Will Deacon wrote: > > > > On Fri, Nov 16, 2018 at 04:54:30PM +0530, Vivek Gautam wrote: > > > > > @@ -2026,6 +2027,17 @@ ARM_SMMU_MATCH_DATA(arm_mmu401, > > > > > ARM_SMMU_V1_64K, GENERIC_SMMU); > > > > > ARM_SMMU_MATCH_DATA(arm_mmu500, ARM_SMMU_V2, ARM_MMU500); > > > > > ARM_SMMU_MATCH_DATA(cavium_smmuv2, ARM_SMMU_V2, CAVIUM_SMMUV2); > > > > > > > > > > +static const char * const qcom_smmuv2_clks[] = { > > > > > + "bus", "iface", > > > > > +}; > > > > > + > > > > > +static const struct arm_smmu_match_data qcom_smmuv2 = { > > > > > + .version = ARM_SMMU_V2, > > > > > + .model = QCOM_SMMUV2, > > > > > + .clks = qcom_smmuv2_clks, > > > > > + .num_clks = ARRAY_SIZE(qcom_smmuv2_clks), > > > > > +}; > > > > > > > > These seems redundant if we go down the route proposed by Thor, where we > > > > just pull all of the clocks out of the device-tree. In which case, why > > > > do we need this match_data at all? > > > > > > Which is better? Driver relying solely on the device tree to tell > > > which all clocks > > > are required to be enabled, > > > or, the driver deciding itself based on the platform's match data, > > > that it should > > > have X, Y, & Z clocks that should be supplied from the device tree. > > > > The former would simplify the driver, but would also make it > > impossible to spot mistakes in DT, which would ultimately surface out > > as very hard to debug bugs (likely complete system lockups). > > Thanks. > Yea, this is how I understand things presently. Relying on device tree > puts the things out of driver's control. But it also has the undesirable effect of having to update the driver code whenever we want to add support for a new SMMU implementation. If we do this all in the DT, as Thor is trying to do, then older kernels will work well with new hardware. > Hi Will, > Am I unable to understand the intentions here for Thor's clock-fetch > design change? I'm having trouble parsing your question, sorry. Please work with Thor so that we have a single way to get the clock information. My preference is to take it from the firmware, for the reason I stated above. Will ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [RESEND PATCH v17 5/5] iommu/arm-smmu: Add support for qcom,smmu-v2 variant
Hi Tomasz, On Fri, Nov 23, 2018 at 2:52 PM Tomasz Figa wrote: > > Hi Vivek, Will, > > On Fri, Nov 23, 2018 at 6:13 PM Vivek Gautam > wrote: > > > > Hi Will, > > > > On Wed, Nov 21, 2018 at 11:09 PM Will Deacon wrote: > > > > > > [+Thor] > > > > > > On Fri, Nov 16, 2018 at 04:54:30PM +0530, Vivek Gautam wrote: > > > > qcom,smmu-v2 is an arm,smmu-v2 implementation with specific > > > > clock and power requirements. > > > > On msm8996, multiple cores, viz. mdss, video, etc. use this > > > > smmu. On sdm845, this smmu is used with gpu. > > > > Add bindings for the same. > > > > > > > > Signed-off-by: Vivek Gautam > > > > Reviewed-by: Rob Herring > > > > Reviewed-by: Tomasz Figa > > > > Tested-by: Srinivas Kandagatla > > > > Reviewed-by: Robin Murphy > > > > --- > > > > drivers/iommu/arm-smmu.c | 13 + > > > > 1 file changed, 13 insertions(+) > > > > > > > > diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c > > > > index 2098c3141f5f..d315ca637097 100644 > > > > --- a/drivers/iommu/arm-smmu.c > > > > +++ b/drivers/iommu/arm-smmu.c > > > > @@ -120,6 +120,7 @@ enum arm_smmu_implementation { > > > > GENERIC_SMMU, > > > > ARM_MMU500, > > > > CAVIUM_SMMUV2, > > > > + QCOM_SMMUV2, > > > > }; > > > > > > > > struct arm_smmu_s2cr { > > > > @@ -2026,6 +2027,17 @@ ARM_SMMU_MATCH_DATA(arm_mmu401, ARM_SMMU_V1_64K, > > > > GENERIC_SMMU); > > > > ARM_SMMU_MATCH_DATA(arm_mmu500, ARM_SMMU_V2, ARM_MMU500); > > > > ARM_SMMU_MATCH_DATA(cavium_smmuv2, ARM_SMMU_V2, CAVIUM_SMMUV2); > > > > > > > > +static const char * const qcom_smmuv2_clks[] = { > > > > + "bus", "iface", > > > > +}; > > > > + > > > > +static const struct arm_smmu_match_data qcom_smmuv2 = { > > > > + .version = ARM_SMMU_V2, > > > > + .model = QCOM_SMMUV2, > > > > + .clks = qcom_smmuv2_clks, > > > > + .num_clks = ARRAY_SIZE(qcom_smmuv2_clks), > > > > +}; > > > > > > These seems redundant if we go down the route proposed by Thor, where we > > > just pull all of the clocks out of the device-tree. In which case, why > > > do we need this match_data at all? > > > > Which is better? Driver relying solely on the device tree to tell > > which all clocks > > are required to be enabled, > > or, the driver deciding itself based on the platform's match data, > > that it should > > have X, Y, & Z clocks that should be supplied from the device tree. > > The former would simplify the driver, but would also make it > impossible to spot mistakes in DT, which would ultimately surface out > as very hard to debug bugs (likely complete system lockups). Thanks. Yea, this is how I understand things presently. Relying on device tree puts the things out of driver's control. Hi Will, Am I unable to understand the intentions here for Thor's clock-fetch design change? > > For qcom_smmuv2, I believe we're eventually going to end up with > platform-specific quirks anyway, so specifying the clocks too wouldn't > hurt. Given that, I'd recommend sticking to the latter, i.e. what this > patch does. > > Best regards, > Tomasz Best regards Vivek > ___ > iommu mailing list > iommu@lists.linux-foundation.org > https://lists.linuxfoundation.org/mailman/listinfo/iommu -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [RESEND PATCH v17 5/5] iommu/arm-smmu: Add support for qcom,smmu-v2 variant
Hi Vivek, Will, On Fri, Nov 23, 2018 at 6:13 PM Vivek Gautam wrote: > > Hi Will, > > On Wed, Nov 21, 2018 at 11:09 PM Will Deacon wrote: > > > > [+Thor] > > > > On Fri, Nov 16, 2018 at 04:54:30PM +0530, Vivek Gautam wrote: > > > qcom,smmu-v2 is an arm,smmu-v2 implementation with specific > > > clock and power requirements. > > > On msm8996, multiple cores, viz. mdss, video, etc. use this > > > smmu. On sdm845, this smmu is used with gpu. > > > Add bindings for the same. > > > > > > Signed-off-by: Vivek Gautam > > > Reviewed-by: Rob Herring > > > Reviewed-by: Tomasz Figa > > > Tested-by: Srinivas Kandagatla > > > Reviewed-by: Robin Murphy > > > --- > > > drivers/iommu/arm-smmu.c | 13 + > > > 1 file changed, 13 insertions(+) > > > > > > diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c > > > index 2098c3141f5f..d315ca637097 100644 > > > --- a/drivers/iommu/arm-smmu.c > > > +++ b/drivers/iommu/arm-smmu.c > > > @@ -120,6 +120,7 @@ enum arm_smmu_implementation { > > > GENERIC_SMMU, > > > ARM_MMU500, > > > CAVIUM_SMMUV2, > > > + QCOM_SMMUV2, > > > }; > > > > > > struct arm_smmu_s2cr { > > > @@ -2026,6 +2027,17 @@ ARM_SMMU_MATCH_DATA(arm_mmu401, ARM_SMMU_V1_64K, > > > GENERIC_SMMU); > > > ARM_SMMU_MATCH_DATA(arm_mmu500, ARM_SMMU_V2, ARM_MMU500); > > > ARM_SMMU_MATCH_DATA(cavium_smmuv2, ARM_SMMU_V2, CAVIUM_SMMUV2); > > > > > > +static const char * const qcom_smmuv2_clks[] = { > > > + "bus", "iface", > > > +}; > > > + > > > +static const struct arm_smmu_match_data qcom_smmuv2 = { > > > + .version = ARM_SMMU_V2, > > > + .model = QCOM_SMMUV2, > > > + .clks = qcom_smmuv2_clks, > > > + .num_clks = ARRAY_SIZE(qcom_smmuv2_clks), > > > +}; > > > > These seems redundant if we go down the route proposed by Thor, where we > > just pull all of the clocks out of the device-tree. In which case, why > > do we need this match_data at all? > > Which is better? Driver relying solely on the device tree to tell > which all clocks > are required to be enabled, > or, the driver deciding itself based on the platform's match data, > that it should > have X, Y, & Z clocks that should be supplied from the device tree. The former would simplify the driver, but would also make it impossible to spot mistakes in DT, which would ultimately surface out as very hard to debug bugs (likely complete system lockups). For qcom_smmuv2, I believe we're eventually going to end up with platform-specific quirks anyway, so specifying the clocks too wouldn't hurt. Given that, I'd recommend sticking to the latter, i.e. what this patch does. Best regards, Tomasz ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [RESEND PATCH v17 5/5] iommu/arm-smmu: Add support for qcom,smmu-v2 variant
Hi Will, On Wed, Nov 21, 2018 at 11:09 PM Will Deacon wrote: > > [+Thor] > > On Fri, Nov 16, 2018 at 04:54:30PM +0530, Vivek Gautam wrote: > > qcom,smmu-v2 is an arm,smmu-v2 implementation with specific > > clock and power requirements. > > On msm8996, multiple cores, viz. mdss, video, etc. use this > > smmu. On sdm845, this smmu is used with gpu. > > Add bindings for the same. > > > > Signed-off-by: Vivek Gautam > > Reviewed-by: Rob Herring > > Reviewed-by: Tomasz Figa > > Tested-by: Srinivas Kandagatla > > Reviewed-by: Robin Murphy > > --- > > drivers/iommu/arm-smmu.c | 13 + > > 1 file changed, 13 insertions(+) > > > > diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c > > index 2098c3141f5f..d315ca637097 100644 > > --- a/drivers/iommu/arm-smmu.c > > +++ b/drivers/iommu/arm-smmu.c > > @@ -120,6 +120,7 @@ enum arm_smmu_implementation { > > GENERIC_SMMU, > > ARM_MMU500, > > CAVIUM_SMMUV2, > > + QCOM_SMMUV2, > > }; > > > > struct arm_smmu_s2cr { > > @@ -2026,6 +2027,17 @@ ARM_SMMU_MATCH_DATA(arm_mmu401, ARM_SMMU_V1_64K, > > GENERIC_SMMU); > > ARM_SMMU_MATCH_DATA(arm_mmu500, ARM_SMMU_V2, ARM_MMU500); > > ARM_SMMU_MATCH_DATA(cavium_smmuv2, ARM_SMMU_V2, CAVIUM_SMMUV2); > > > > +static const char * const qcom_smmuv2_clks[] = { > > + "bus", "iface", > > +}; > > + > > +static const struct arm_smmu_match_data qcom_smmuv2 = { > > + .version = ARM_SMMU_V2, > > + .model = QCOM_SMMUV2, > > + .clks = qcom_smmuv2_clks, > > + .num_clks = ARRAY_SIZE(qcom_smmuv2_clks), > > +}; > > These seems redundant if we go down the route proposed by Thor, where we > just pull all of the clocks out of the device-tree. In which case, why > do we need this match_data at all? Which is better? Driver relying solely on the device tree to tell which all clocks are required to be enabled, or, the driver deciding itself based on the platform's match data, that it should have X, Y, & Z clocks that should be supplied from the device tree. Thanks Vivek > > Will > ___ > iommu mailing list > iommu@lists.linux-foundation.org > https://lists.linuxfoundation.org/mailman/listinfo/iommu -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [RESEND PATCH v17 5/5] iommu/arm-smmu: Add support for qcom,smmu-v2 variant
[+Thor] On Fri, Nov 16, 2018 at 04:54:30PM +0530, Vivek Gautam wrote: > qcom,smmu-v2 is an arm,smmu-v2 implementation with specific > clock and power requirements. > On msm8996, multiple cores, viz. mdss, video, etc. use this > smmu. On sdm845, this smmu is used with gpu. > Add bindings for the same. > > Signed-off-by: Vivek Gautam > Reviewed-by: Rob Herring > Reviewed-by: Tomasz Figa > Tested-by: Srinivas Kandagatla > Reviewed-by: Robin Murphy > --- > drivers/iommu/arm-smmu.c | 13 + > 1 file changed, 13 insertions(+) > > diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c > index 2098c3141f5f..d315ca637097 100644 > --- a/drivers/iommu/arm-smmu.c > +++ b/drivers/iommu/arm-smmu.c > @@ -120,6 +120,7 @@ enum arm_smmu_implementation { > GENERIC_SMMU, > ARM_MMU500, > CAVIUM_SMMUV2, > + QCOM_SMMUV2, > }; > > struct arm_smmu_s2cr { > @@ -2026,6 +2027,17 @@ ARM_SMMU_MATCH_DATA(arm_mmu401, ARM_SMMU_V1_64K, > GENERIC_SMMU); > ARM_SMMU_MATCH_DATA(arm_mmu500, ARM_SMMU_V2, ARM_MMU500); > ARM_SMMU_MATCH_DATA(cavium_smmuv2, ARM_SMMU_V2, CAVIUM_SMMUV2); > > +static const char * const qcom_smmuv2_clks[] = { > + "bus", "iface", > +}; > + > +static const struct arm_smmu_match_data qcom_smmuv2 = { > + .version = ARM_SMMU_V2, > + .model = QCOM_SMMUV2, > + .clks = qcom_smmuv2_clks, > + .num_clks = ARRAY_SIZE(qcom_smmuv2_clks), > +}; These seems redundant if we go down the route proposed by Thor, where we just pull all of the clocks out of the device-tree. In which case, why do we need this match_data at all? Will ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
[RESEND PATCH v17 5/5] iommu/arm-smmu: Add support for qcom, smmu-v2 variant
qcom,smmu-v2 is an arm,smmu-v2 implementation with specific clock and power requirements. On msm8996, multiple cores, viz. mdss, video, etc. use this smmu. On sdm845, this smmu is used with gpu. Add bindings for the same. Signed-off-by: Vivek Gautam Reviewed-by: Rob Herring Reviewed-by: Tomasz Figa Tested-by: Srinivas Kandagatla Reviewed-by: Robin Murphy --- drivers/iommu/arm-smmu.c | 13 + 1 file changed, 13 insertions(+) diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index 2098c3141f5f..d315ca637097 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -120,6 +120,7 @@ enum arm_smmu_implementation { GENERIC_SMMU, ARM_MMU500, CAVIUM_SMMUV2, + QCOM_SMMUV2, }; struct arm_smmu_s2cr { @@ -2026,6 +2027,17 @@ ARM_SMMU_MATCH_DATA(arm_mmu401, ARM_SMMU_V1_64K, GENERIC_SMMU); ARM_SMMU_MATCH_DATA(arm_mmu500, ARM_SMMU_V2, ARM_MMU500); ARM_SMMU_MATCH_DATA(cavium_smmuv2, ARM_SMMU_V2, CAVIUM_SMMUV2); +static const char * const qcom_smmuv2_clks[] = { + "bus", "iface", +}; + +static const struct arm_smmu_match_data qcom_smmuv2 = { + .version = ARM_SMMU_V2, + .model = QCOM_SMMUV2, + .clks = qcom_smmuv2_clks, + .num_clks = ARRAY_SIZE(qcom_smmuv2_clks), +}; + static const struct of_device_id arm_smmu_of_match[] = { { .compatible = "arm,smmu-v1", .data = _generic_v1 }, { .compatible = "arm,smmu-v2", .data = _generic_v2 }, @@ -2033,6 +2045,7 @@ static const struct of_device_id arm_smmu_of_match[] = { { .compatible = "arm,mmu-401", .data = _mmu401 }, { .compatible = "arm,mmu-500", .data = _mmu500 }, { .compatible = "cavium,smmu-v2", .data = _smmuv2 }, + { .compatible = "qcom,smmu-v2", .data = _smmuv2 }, { }, }; MODULE_DEVICE_TABLE(of, arm_smmu_of_match); -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ___ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu