Re: [IRCA] Motion Sensors for Security Lighting
I had that problem at one time also. When I contacted the mfr., they readily offered to upgrade the sensors for free. My sense is that these won't cause a problem as long as I don't try to power a receiver on the same circuit. Russ Edmunds 15 mi NNW of Philadelphia Grid FN20id FM: Yamaha T-80 & Onkyo T-450RDS w/ APS9B @15'; Grundig G8 AM: Modified Sony ICF 2010's barefoot --- On Sat, 12/8/12, Pete Taylor wrote: > From: Pete Taylor > Subject: Re: [IRCA] Motion Sensors for Security Lighting > To: "Mailing list for the International Radio Club of America" > > Date: Saturday, December 8, 2012, 1:33 AM > Our garage door sensors were the > culprit a couple of years ago. Our son rewired them and that > took care of that. > > Pete Taylor > Tacoma, WA > 12225w 4719n > HQ180 & ICF2010 > Kiwa aircore & Palomar loops > DX398, SRF-59 & M37V > Eton E100 + Tecsun PL-300/380 > == > Russ Edmunds wrote: > > > I'm wondering if these units may present a serious > noise problem. My wife has been pushing to replace the light > sensors I've been using with motion detectors. The light > sensors don't generate any noticeable noise unless I put a > portable close to them, but they do come on when it's > overcast or stormy, and at this time of year run from about > 4 pm to about 8 am. > > ___ > IRCA mailing list > IRCA@hard-core-dx.com > http://montreal.kotalampi.com/mailman/listinfo/irca > > Opinions expressed in messages on this mailing list are > those of the original contributors and do not necessarily > reflect the opinion of the IRCA, its editors, publishing > staff, or officers > > For more information: http://www.ircaonline.org > > To Post a message: irca@hard-core-dx.com > > ___ IRCA mailing list IRCA@hard-core-dx.com http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: irca@hard-core-dx.com
Re: [IRCA] Motion Sensors for Security Lighting
Our garage door sensors were the culprit a couple of years ago. Our son rewired them and that took care of that. Pete Taylor Tacoma, WA 12225w 4719n HQ180 & ICF2010 Kiwa aircore & Palomar loops DX398, SRF-59 & M37V Eton E100 + Tecsun PL-300/380 == Russ Edmunds wrote: > I'm wondering if these units may present a serious noise problem. My wife has > been pushing to replace the light sensors I've been using with motion > detectors. The light sensors don't generate any noticeable noise unless I put > a portable close to them, but they do come on when it's overcast or stormy, > and at this time of year run from about 4 pm to about 8 am. ___ IRCA mailing list IRCA@hard-core-dx.com http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: irca@hard-core-dx.com
[IRCA] Motion Sensors for Security Lighting
I'm wondering if these units may present a serious noise problem. My wife has been pushing to replace the light sensors I've been using with motion detectors. The light sensors don't generate any noticeable noise unless I put a portable close to them, but they do come on when it's overcast or stormy, and at this time of year run from about 4 pm to about 8 am. So before I make a decision to spend the money for the units and installation, I'm looking for any input. The units in question are RAB Stealth 360's. I'd hate to spend several hundred dollars to make my AM/LW DX'ing even more difficult. Thanks- Russ Edmunds 15 mi NNW of Philadelphia Grid FN20id FM: Yamaha T-80 & Onkyo T-450RDS w/ APS9B @15'; Grundig G8 AM: Modified Sony ICF 2010's barefoot ___ IRCA mailing list IRCA@hard-core-dx.com http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: irca@hard-core-dx.com
