Re: Running KVM in addition to LXC on local LXD CLOUD

[Nicholas Skaggs]

I'm not sure how you installed the hwe kernel, but you should simply


 sudo apt-get install --install-recommends linux-generic-hwe-16.04


On Thu, Jun 29, 2017 at 3:15 AM, N. S.  wrote:

> Hi Nicholas and Andrew,
>
>
> Thank you both for your help.
>
> @Nicholas,
> I downloaded the kernel 4.8 and 4.11 Low-latency (Requirement by the
> application) and installed it
> sudo dpkg -i linux-header-4.8* linux-image-4.8*
> sudo update-grub
>
> But I am faced with a challenge that ZFS is not starting UP during boot.
> Cf attached.
>
> Further digging, the status of the services is as follows:
>
>
>
> * $ systemctl status zfs-import-cache.service*
> ● zfs-import-cache.service - Import ZFS pools by cache file
>Loaded: loaded (/lib/systemd/system/zfs-import-cache.service; static;
> vendor preset: enabled)
>Active: failed (Result: exit-code) since Wed 2017-06-28 19:54:33 EEST;
> 12min ago
>   Process: 1032 ExecStartPre=/sbin/modprobe zfs (code=exited,
> status=1/FAILURE)
>
> Jun 28 19:54:33 ns-HP systemd[1]: Starting Import ZFS pools by cache
> file...
> Jun 28 19:54:33 ns-HP modprobe[1032]: modprobe: FATAL: Module zfs not
> found in directory /lib/modules/4.8.0-040800-lowlatency
> Jun 28 19:54:33 ns-HP systemd[1]: zfs-import-cache.service: Control
> process exited, code=exited status=1
> Jun 28 19:54:33 ns-HP systemd[1]: Failed to start Import ZFS pools by
> cache file.
> Jun 28 19:54:33 ns-HP systemd[1]: zfs-import-cache.service: Unit entered
> failed state.
> Jun 28 19:54:33 ns-HP systemd[1]: zfs-import-cache.service: Failed with
> result 'exit-code'.
>
>
>
>
> * ns@ns-HP:/usr/src/linux-headers-4.4.0-81$ systemctl status
> zfs-mount.service*
> ● zfs-mount.service - Mount ZFS filesystems
>Loaded: loaded (/lib/systemd/system/zfs-mount.service; static; vendor
> preset: enabled)
>Active: failed (Result: exit-code) since Wed 2017-06-28 19:54:34 EEST;
> 13min ago
>   Process: 1042 ExecStart=/sbin/zfs mount -a (code=exited,
> status=1/FAILURE)
>  Main PID: 1042 (code=exited, status=1/FAILURE)
>
> Jun 28 19:54:33 ns-HP systemd[1]: Starting Mount ZFS filesystems...
> Jun 28 19:54:34 ns-HP zfs[1042]: The ZFS modules are not loaded.
> Jun 28 19:54:34 ns-HP zfs[1042]: Try running '/sbin/modprobe zfs' as root
> to load them.
> Jun 28 19:54:34 ns-HP systemd[1]: zfs-mount.service: Main process exited,
> code=exited, status=1/FAILURE
> Jun 28 19:54:34 ns-HP systemd[1]: Failed to start Mount ZFS filesystems.
> Jun 28 19:54:34 ns-HP systemd[1]: zfs-mount.service: Unit entered failed
> state.
> Jun 28 19:54:34 ns-HP systemd[1]: zfs-mount.service: Failed with result
> 'exit-code'.
> ns@ns-HP:/usr/src/linux-headers-4.4.0-81$
>
> I tried to run modprobe zfs as advised, but:
>
> $ sudo -i
> [sudo] password for ns:
> root@ns-HP:~*# /sbin/modprobe zfs*
> modprobe: FATAL: Module zfs not found in directory
> /lib/modules/4.8.0-040800-lowlatency
> root@ns-HP:~#
>
>
>
> I know this might be not directly related to JUJU, but to ubuntu kernel,
> but I appreciate if  you could help.
>
>
> Thanks,
>
> BR,
>
>
> *NS *
>
>
>
> *Nicholas Skaggs*nicholas.skaggs at canonical.com
> 
> *Tue Jun 27 19:51:08 UTC 2017*
>
> If it's possible, I would simply run the hwe kernel on xenial which
> provides 4.8+. Read more about running an updated stack here:
> https://wiki.ubuntu.com/Kernel/LTSEnablementStack
>
> This would solve your specific problem without worrying about running
> kvm's.
>
> Kernel/LTSEnablementStack - Ubuntu Wiki
> 
> wiki.ubuntu.com
> Ubuntu Kernel Release Schedule. The following is a generic view of the
> Ubuntu release schedule, the kernels delivered, and the support time frames.
>
>
>
>
> --
> *From:* Andrew Wilkins 
> *Sent:* Sunday, June 25, 2017 10:42 PM
> *To:* N. S.; juju@lists.ubuntu.com
> *Subject:* Re: Running KVM in addition to LXC on local LXD CLOUD
>
> On Sat, Jun 24, 2017 at 9:14 PM N. S.  wrote:
>
>> Hi,
>>
>>
>> I am running 10 machines on local LXD cloud, and it's fine.
>>
>> My host is Ubuntu 16.04, kernel 4.4.0-81.
>>
>> However, I have the following challenge:
>> One of the machines (M0) stipulates a kernel 4.7+
>>
>>
>> As it's known, unlike KVM, LXC makes use of same kernel of the host
>> system and in this case (4.4.0-81) breaching thus the stipulation of M0
>> (4.7+).
>>
>>
>> I have read that starting Juju 2.0, KVM is no more supported.
>>
>
> Juju still supports kvm, but the old "local" provider which supported
> lxc/kvm is gone.
>
> You could run a kvm container from within a lxd machine with the right
> apparmor settings. Probably the most straight forward thing to do, though,
> would be to create a KVM VM yourself, install Ubuntu on it, and then
> manually 

Re: Command Completion Not working? --SOLVED

[N. S.]

Hi,

Sorry
False Alarm.

There is something wrong , especially that version reads 2.0.2!

After the refresh of the snap, issue is solved.

Thanks
BR
NS

On Jun 28, 2017 5:38 PM, "N. S."  wrote:

Hi Juju team,


I am upgraded my juju platform to latest release:

~$ juju --version
2.0.2-xenial-amd64


However, when I use the tab key for command completion, I get this weird 
"juju_complete_2_0: command not found" instead of normal command completion 
that I used to have in version 2.1.3.

Please see the below.




$ juju attac_juju_complete_2_0: command not found
_juju_complete_2_0: command not found
h_juju_complete_2_0: command not found

Thanks.
BR,
NS.

-- 
Juju mailing list
Juju@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/juju

Command Completion Not working?

[N. S.]

Hi Juju team,


I am upgraded my juju platform to latest release:

~$ juju --version
2.0.2-xenial-amd64


However, when I use the tab key for command completion, I get this weird 
"juju_complete_2_0: command not found" instead of normal command completion 
that I used to have in version 2.1.3.

Please see the below.




$ juju attac_juju_complete_2_0: command not found
_juju_complete_2_0: command not found
h_juju_complete_2_0: command not found

Thanks.
BR,
NS.
-- 
Juju mailing list
Juju@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/juju