Hello Aaron,
For VCP, I am using 1G and 1 vCPU, same for VFP. I am using 19.4R1. As
the wiki suggests 2GB and 4GB, this seems quite comfortable. My setup
may be too simplistic compared to yours. See for example
https://github.com/vincentbernat/network-lab/tree/master/lab-juniper-vqfx-vxlan-symmetric
which works fine with 1G for each.
It may just be that the memory and CPU need to be increased for each
interface. In non-lite mode, the vMX has this kind of requirements.
--
Use statement labels that mean something.
- The Elements of Programming Style (Kernighan & Plauger)
-Original Message-
From: aaron--- via juniper-nsp
Sent: 23 June 2021 04:43 +02
Subject: [j-nsp] vQFX cpu cores and ram
To: Juniper NSP
> From: aa...@digitalcrossroad.org
> Subject: vQFX cpu cores and ram
> To: Juniper NSP
> Date: Wed, 23 Jun 2021 04:43:36 +0200 (CEST) (3 hours, 28 minutes ago)
>
> Hi All,
>
> If you have experience running vQFXs, what are you setting for cpu cores and
> ram?
>
> I'm using eve-ng to get around group_fwd_mask issues[1] such that I
> can have lacp and lldp working right out of the box.
>
> The defaults on the github page do not seem enough, as if I set those
> values, I can't even get lacp bundles to come up, once I bump the
> resources, the bundles come up.
>
> I've asked my SE, but I would like to know what the community has set in
> their environments?
>
> Thanks,
> Aaron
> 1.
> https://interestingtraffic.nl/2017/11/21/an-oddly-specific-post-about-group_fwd_mask/
> --
>
> ___
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
