[Kernel-packages] [Bug 1398533] Re: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10
Okay, I have never had to install an upstream kernel before so I hope I am using the right kernel here. When I enter the terminal command: uname -r my kernel version information reads: 3.18.0-031800rc7-generic Please tell me if this is wrong and I will try to figure out where I went wrong. Some good news. Clickpad behavior is better, I daresay even useable, but still has problems. What works: Touchpad movement is still operational. But now I can also perform touchpad-based simulated clicks now. Single-tapping on the touchpad gives me a simulated left-click. Tap-and-hold allows me to click and drag. Double-touch simulates right-click. Nothing gets stuck or acts quirky when I use the simulated clicks. What fails: The hardware clickpad buttons still do not work and still cause the click location to get stuck until an enable-disable cycle is run on the touchpad (xinput disable/enable id). I am going to tag this as bug-exists due to the clickpad button issue. Please let me know if there is anything else I can do to help test this issue. ** Tags added: kernel-bug-exists-upstream kernel-bug-exists- upstream-3.18-rc7 ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1398533 Title: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10 Status in linux package in Ubuntu: Confirmed Bug description: Edit: This bug is a possible duplicate of bug #1394869 So far, from what I can gather, the clickpad functions normally when using the touchpad portion to maneuver the onscreen pointer. However, the act of using one of the hardware click buttons causes it to malfunction. To test, I ran: xinput --test 11 and the output given shows a rapid stream of positioning data prior to the click, then no data after the click, however the mouse pointer appears to continue to move. However attempting to click on anything with the pointer after the first click of the clickpad registers as a click in the same location with either the clickpad or an external mouse until the clickpad is disabled with: xinput set-prop 11 Device Enabled 0 which of course causes the clickpad to cease function, however the USB mouse then continues to work normally. If you would like for me to perform any other tests, please let me know what I can try. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: amordea1737 F lxpanel CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: LXDE Date: Tue Dec 2 15:13:05 2014 HibernationDevice: RESUME=UUID=9d5cbd54-017f-45dc-a33f-f15e7196661a InstallationDate: Installed on 2014-12-02 (0 days ago) InstallationMedia: Lubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: Hewlett-Packard HP Stream Notebook PC 11 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=40a60a52-d575-4dd8-9425-7c22dbee89bd ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/25/2014 dmi.bios.vendor: Insyde dmi.bios.version: F.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8023 dmi.board.vendor: Hewlett-Packard dmi.board.version: 54.0D dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.02:bd09/25/2014:svnHewlett-Packard:pnHPStreamNotebookPC11:pvrType1-ProductConfigId:rvnHewlett-Packard:rn8023:rvr54.0D:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Stream Notebook PC 11 dmi.product.version: Type1 - ProductConfigId dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398533/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1357723] Re: No sound after rebooting from Windows (ALC1150)
** Changed in: linux (Ubuntu) Status: Confirmed = Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1357723 Title: No sound after rebooting from Windows (ALC1150) Status in The Linux Kernel: Unknown Status in linux package in Ubuntu: Fix Committed Bug description: I get no sound from line-out (green) plug after rebooting from Windos. I found out, that sound channels are just swapped, so the line-out is now assigned to the black jack. If i stop the machine, and do a cold-boot right into GNU/Linux, then it is green again. I couldn't reorder it with hda-jack-retask either. I found at least one person affected by this problem: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1321421/comments/35 MOBO: Gigabyte GA-H97-D3H codec: ALC1150 (HDA-intel) sys: Ubuntu-14.04 / Linux-mint 17 default installs kernel: Ubuntu 3.13.0-34.60-generic (64 bit) dmesg: (no difference on cold boot, and reboot from windows) [3.813038] snd_hda_intel :00:1b.0: irq 48 for MSI/MSI-X [3.828489] hda_codec: ALC1150: SKU not ready 0x [3.828906] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [3.828907]speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [3.828907]hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [3.828908]mono: mono_out=0x0 [3.828908]dig-out=0x11/0x0 [3.828909]inputs: [3.828910] Front Mic=0x19 [3.828911] Rear Mic=0x18 [3.828911] Line=0x1a [3.828912] realtek: No valid SSID, checking pincfg 0x for NID 0x1d [3.828912] realtek: Enable default setup for auto mode as fallback [3.842157] input: HDA Intel PCH Front Headphone as /devices/pci:00/:00:1b.0/sound/card0/input16 [3.842238] input: HDA Intel PCH Line Out Side as /devices/pci:00/:00:1b.0/sound/card0/input15 [3.842268] input: HDA Intel PCH Line Out CLFE as /devices/pci:00/:00:1b.0/sound/card0/input14 [3.842415] input: HDA Intel PCH Line Out Surround as /devices/pci:00/:00:1b.0/sound/card0/input13 [3.843987] input: HDA Intel PCH Line Out Front as /devices/pci:00/:00:1b.0/sound/card0/input12 [3.845304] input: HDA Intel PCH Line as /devices/pci:00/:00:1b.0/sound/card0/input11 [3.846477] input: HDA Intel PCH Rear Mic as /devices/pci:00/:00:1b.0/sound/card0/input10 [3.846592] input: HDA Intel PCH Front Mic as /devices/pci:00/:00:1b.0/sound/card0/input9 --- ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: laca 1827 F pulseaudio /dev/snd/controlC0: laca 1827 F pulseaudio /dev/snd/pcmC0D0p: laca 1827 F...m pulseaudio DistroRelease: Ubuntu 14.04 IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: Gigabyte Technology Co., Ltd. H97-D3H NonfreeKernelModules: fglrx Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=hu_HU.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-34-generic root=UUID=23864803-a370-4772-b8cb-77f2f9bf3e2d ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-34.60-generic 3.13.11.4 RelatedPackageVersions: linux-restricted-modules-3.13.0-34-generic N/A linux-backports-modules-3.13.0-34-generic N/A linux-firmware 1.127.4 RfKill: Tags: qiana Uname: Linux 3.13.0-34-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark _MarkForUpload: True dmi.bios.date: 06/26/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H97-D3H-CF dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF5:bd06/26/2014:svnGigabyteTechnologyCo.,Ltd.:pnH97-D3H:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rnH97-D3H-CF:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: H97-D3H dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1357723/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 422536] Re: EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
** Tags removed: kj-triage ** Changed in: kerneloops (Ubuntu) Assignee: federicosm2 (federicosm2) = (unassigned) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to kerneloops in Ubuntu. https://bugs.launchpad.net/bugs/422536 Title: EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. Status in The Linux Kernel: Invalid Status in NULL Project: Invalid Status in kerneloops package in Ubuntu: Fix Released Status in linux package in Ubuntu: Fix Released Status in kerneloops source package in Karmic: Fix Released Status in linux source package in Karmic: Fix Released Bug description: The edac_amd64 module attempts to load on many systems. If the system doesn't have ECC memory, or it is disabled in the BIOS, then the module prints EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. Might be a BIOS bug, if BIOS says ECC is enabled Use of the override can cause unknown side effects. before failing to load. This won't cause issues for most people that see the message. kerneloops picks this up as kernel problem as the WARNING: looks a lot like what you get when using WARN(). There are several aspects to this issue: * linux - something attempts to load the module when perhaps it doesn't need to (unclear at this point) - the module looks like it is using WARN() when it isn't, and is arguably more SHOUTY than it needs to be. * kerneloops - picks up this as WARN() when it isn't. - Was accidentally left enabled for the stable release, people shouldn't be getting asked to report this at this point. - Isn't very good at dealing with repeat issues, causing more reports to be sent than are needed. and possibly others as well. ProblemType: KernelOops Annotation: Your system might become unstable now and might need to be restarted. Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: yoman823464 F pulseaudio /dev/snd/pcmC0D0p: yoman823464 F...m pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'SB'/'HDA ATI SB at 0xf9ff irq 16' Mixer name : 'Realtek ALC888' Components : 'HDA:10ec0888,18491e01,0011' Controls : 37 Simple ctrls : 21 Date: Tue Sep 1 07:48:00 2009 DistroRelease: Ubuntu 9.10 Failure: oops HibernationDevice: RESUME=UUID=69c64130-cc6f-4a5b-952b-3ba4c893ba48 MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia Package: linux-image-2.6.31-8-generic 2.6.31-8.28 PccardctlIdent: PccardctlStatus: ProcCmdLine: root=UUID=19f3bdd6-1b33-48e0-8081-d00e178d9f7d ro splash vga=792 ProcVersionSignature: Ubuntu 2.6.31-8.28-generic RelatedPackageVersions: linux-backports-modules-2.6.31-8-generic N/A linux-firmware 1.16 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Tags: kernel-oops Title: 6.073813] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. Uname: Linux 2.6.31-8-generic x86_64 WifiSyslog: WpaSupplicantLog: dmi.bios.date: 04/24/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P1.00 dmi.board.name: M3A780GXH/128M dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP1.00:bd04/24/2009:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnM3A780GXH/128M:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. http://bugzilla.kernel.org/show_bug.cgi?id=15238 To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/422536/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1384896] Re: update-rc.d warning when kerneloops-daemon is installed
It looks like bug #452000 was fixed by this change. diff -u kerneloops-0.12+git20090217/debian/rules kerneloops-0.12+git20090217/debian/rules --- kerneloops-0.12+git20090217/debian/rules +++ kerneloops-0.12+git20090217/debian/rules @@ -43,7 +43,7 @@ dh_installchangelogs dh_installdocs dh_installexamples - dh_installinit -pkerneloops-daemon --name=kerneloops -o + dh_installinit -pkerneloops-daemon --name=kerneloops -o -- start 20 2 3 4 5 . stop 20 1 . # dh_installdebconf # dh_installman kerneloops.8 dh_link -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to kerneloops in Ubuntu. https://bugs.launchpad.net/bugs/1384896 Title: update-rc.d warning when kerneloops-daemon is installed Status in kerneloops package in Ubuntu: New Bug description: There is a warning when kerneloops-daemon is installed: update-rc.d: warning: default stop runlevel arguments (0 1 6) do not match kerneloops Default-Stop values (1) This seems related to bug #452000 The following NEW packages will be installed: kerneloops-daemon 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 18.5 kB of archives. After this operation, 120 kB of additional disk space will be used. Get:1 http://ca.archive.ubuntu.com/ubuntu/ trusty/main kerneloops-daemon amd64 0.12+git20090217-3ubuntu8 [18.5 kB] Fetched 18.5 kB in 0s (86.3 kB/s) Selecting previously unselected package kerneloops-daemon. (Reading database ... 208971 files and directories currently installed.) Preparing to unpack .../kerneloops-daemon_0.12+git20090217-3ubuntu8_amd64.deb ... Unpacking kerneloops-daemon (0.12+git20090217-3ubuntu8) ... Processing triggers for ureadahead (0.100.0-16) ... ureadahead will be reprofiled on next reboot Processing triggers for man-db (2.6.7.1-1ubuntu1) ... Setting up kerneloops-daemon (0.12+git20090217-3ubuntu8) ... update-rc.d: warning: default stop runlevel arguments (0 1 6) do not match kerneloops Default-Stop values (1) Processing triggers for ureadahead (0.100.0-16) ... ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: kerneloops-daemon 0.12+git20090217-3ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7 Uname: Linux 3.13.0-37-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 CurrentDesktop: Unity Date: Thu Oct 23 15:58:15 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2012-11-01 (721 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) KernelSyslog: Oct 23 10:53:03 mathew-VGN-FW455D kernel: [ 2022.907424] perf samples too long (5003 5000), lowering kernel.perf_event_max_sample_rate to 25000 SourcePackage: kerneloops UpgradeStatus: Upgraded to trusty on 2014-09-04 (49 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/kerneloops/+bug/1384896/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
Re: [Kernel-packages] [Bug 1354668] Re: Fix for suspend/hibernate with DVB-t USB stick
May I suggest to update your bug reporting etiquette to not require bios updates if the motherboard manufactuerer does not provide a reliable way to update the bios from within Ubuntu whilst the motherboard is working stable? I bricked my MSI motherboard yesterday by installing BIOS version 4.3 using FreeDOS. The update went great but now my motherboard is in an infinite boot loop. After about 7 secs the motherboard resets. See also Google for a lot of people facing the same with this unstable MSI motherboard with unfriendly Linux support and a buggy BIOS update procedure. MSI is a bad choice for Linux / Ubuntu. (yes there is some intended SEO in this report) So, this bug report costs me at least 50EUR and a lot of time :-( I will test again when I have a new motherboard installed and time for testing. Obviously, I will refrain from doing a BIOS update if requested here... Any suggestions for which motherboard to buy? I need USB3, ethernet, 3 SATA-600 ports and 5.1 or higher onboard sound. I prefer no separate onboard RAID controller as this slows down booting and Linux software RAID is easier/much more reliable. Linux stability is very important, especially as this computer is put to sleep often. Are Asrock and Gigabyte Linux-friendly brands? Which Intel chipset will be the most reliable: B75, P75, H77? What Realtek chips will give the most reliable and best sound experience in Ubuntu: ALC662, ALC887 or ALC892? Thanks for the support! -- Mvg, Sander Devrieze. 2014-12-05 22:38 GMT+01:00 Christopher M. Penalver christopher.m.penal...@gmail.com: sander, as per http://www.msi.com/support/mb/P67AGD65.html#down-bios an update to your BIOS is available (4.3). If you update to this following https://help.ubuntu.com/community/BIOSUpdate does it change anything? If it doesn't, could you please both specify what happened, and provide the output of the following terminal command: sudo dmidecode -s bios-version sudo dmidecode -s bios-release-date For more on BIOS updates and linux, please see https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette . Please note your current BIOS is already in the Bug Description, so posting this on the old BIOS would not be helpful. As well, you don't have to create a new bug report. Once the BIOS is updated, then please mark this report Status Confirmed. Thank you for your understanding. ** Tags added: bios-outdated-4.3 -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1354668 Title: Fix for suspend/hibernate with DVB-t USB stick To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1354668/+subscriptions -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1354668 Title: Fix for suspend/hibernate with DVB-t USB stick Status in linux package in Ubuntu: Incomplete Bug description: I have a Terratec Cinergy T USB XXS DVB-t USB stick, but when you suspend the system while a radio or TV channel is actively playing in some application, the system does not correctly suspend the device. The system will not wake up again and you have to reset the computer. This bug exists for at least 3 year and likely people with similar DVB-t USB sticks will be affected as well. I have created a failure proof workaround solution for VLC by creating the script /etc/pm/sleep.d/50_dvb_usb_dib0700_quirk: #!/bin/sh PASS=enter password for LUA telnet access to VLC case $1 in hibernate|suspend) # check whether a stream with telx (Teletext) is active or not if [ `{ echo $PASS; echo info; } | netcat localhost 4212 -q 1 | grep -c telx` -eq 0 ] then continue else { echo $PASS; echo stop; } | netcat localhost 4212 -q 1 /dev/null fi modprobe -r dvb_usb_dib0700 sleep 1 ;; thaw|resume) modprobe dvb_usb_dib0700 # automatically start playing after wake up { echo $PASS; echo play; } | netcat localhost 4212 -q 1 /dev/null ;; *) exit $NA ;; esac This solution was inspired by: http://forum.xbmc.org/printthread.php?tid=71490 --- ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sander 2632 F pulseaudio /dev/snd/controlC0: sander 2632 F pulseaudio CRDA: Error: [Errno 2] Bestand of map bestaat niet CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=c4ca47bf-e5b3-4e55-8e04-7545c1f50cdd IwConfig: p6p1 no wireless extensions. lono wireless extensions. MachineType: MSI MS-7681 NonfreeKernelModules: nvidia Package: linux (not installed) ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic root=UUID=e882cc04-9882-4d29-b98d-cd0144f876ad ro quiet splash
[Kernel-packages] [Bug 1400044] [NEW] Acer E1-572 bluetooth not working on 14.04 kernel 3.13
Public bug reported: On 14.04 with kernel 3.13 my bluetooth does not work. A lot of bug report reading I think my problem is similar to https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1237296 But every time someones asks a question they are asked to fill in a new bur report. Hope to get some good info about this problem and simple steps to solve this problem. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-40-generic 3.13.0-40.69 ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10 Uname: Linux 3.13.0-40-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: zuijle 2628 F pulseaudio /dev/snd/pcmC1D0p: zuijle 2628 F...m pulseaudio /dev/snd/controlC0: zuijle 2628 F pulseaudio CurrentDesktop: Unity Date: Sun Dec 7 10:16:15 2014 HibernationDevice: RESUME=UUID=3191ba14-d48e-42a4-a86f-7cb2ebae5569 InstallationDate: Installed on 2014-07-18 (141 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Acer Aspire E1-572 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=eea14111-5ac6-4bae-86a1-d7c8185b8dc6 ro quiet splash acpi_osi=Linux acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-40-generic N/A linux-backports-modules-3.13.0-40-generic N/A linux-firmware 1.127.10 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: dmi.bios.date: 11/21/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.13 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.13:bd11/21/2013:svnAcer:pnAspireE1-572:pvrV2.13:rvnAcer:rnEA50_HW:rvrV2.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.13 dmi.sys.vendor: Acer ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400044 Title: Acer E1-572 bluetooth not working on 14.04 kernel 3.13 Status in linux package in Ubuntu: Confirmed Bug description: On 14.04 with kernel 3.13 my bluetooth does not work. A lot of bug report reading I think my problem is similar to https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1237296 But every time someones asks a question they are asked to fill in a new bur report. Hope to get some good info about this problem and simple steps to solve this problem. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-40-generic 3.13.0-40.69 ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10 Uname: Linux 3.13.0-40-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: zuijle 2628 F pulseaudio /dev/snd/pcmC1D0p: zuijle 2628 F...m pulseaudio /dev/snd/controlC0: zuijle 2628 F pulseaudio CurrentDesktop: Unity Date: Sun Dec 7 10:16:15 2014 HibernationDevice: RESUME=UUID=3191ba14-d48e-42a4-a86f-7cb2ebae5569 InstallationDate: Installed on 2014-07-18 (141 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Acer Aspire E1-572 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=eea14111-5ac6-4bae-86a1-d7c8185b8dc6 ro quiet splash acpi_osi=Linux acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-40-generic N/A linux-backports-modules-3.13.0-40-generic N/A linux-firmware 1.127.10 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: dmi.bios.date: 11/21/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.13 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.13:bd11/21/2013:svnAcer:pnAspireE1-572:pvrV2.13:rvnAcer:rnEA50_HW:rvrV2.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400044/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to :
[Kernel-packages] [Bug 1400044] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400044 Title: Acer E1-572 bluetooth not working on 14.04 kernel 3.13 Status in linux package in Ubuntu: Confirmed Bug description: On 14.04 with kernel 3.13 my bluetooth does not work. A lot of bug report reading I think my problem is similar to https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1237296 But every time someones asks a question they are asked to fill in a new bur report. Hope to get some good info about this problem and simple steps to solve this problem. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-40-generic 3.13.0-40.69 ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10 Uname: Linux 3.13.0-40-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: zuijle 2628 F pulseaudio /dev/snd/pcmC1D0p: zuijle 2628 F...m pulseaudio /dev/snd/controlC0: zuijle 2628 F pulseaudio CurrentDesktop: Unity Date: Sun Dec 7 10:16:15 2014 HibernationDevice: RESUME=UUID=3191ba14-d48e-42a4-a86f-7cb2ebae5569 InstallationDate: Installed on 2014-07-18 (141 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Acer Aspire E1-572 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=eea14111-5ac6-4bae-86a1-d7c8185b8dc6 ro quiet splash acpi_osi=Linux acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-40-generic N/A linux-backports-modules-3.13.0-40-generic N/A linux-firmware 1.127.10 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: dmi.bios.date: 11/21/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.13 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.13:bd11/21/2013:svnAcer:pnAspireE1-572:pvrV2.13:rvnAcer:rnEA50_HW:rvrV2.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400044/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1298972] Re: stacktrace in ext4: /build/buildd/linux-3.13.0/fs/ext4/ext4_jbd2.c:259 __ext4_handle_dirty_metadata+0x1a2/0x1c0()
I just upgraded my hypervisor to Ubuntu 14.04 in an attempt to resolve this issue as Simon experienced. However under heavy I/O of 'aptitude upgrade', I've had 3 more occurences of this with hours of upgrading the host to 14.04. So it appears not to be related to the hypervisor. This leads me down the path that most of the affected systems have been upgraded from 10.04 - 12.04 - 14.04. Which would point to something in the upgrade path affecting this. As Simon re-installed all of his systems and didn't have the issue anymore. I could try random kernels on machines, but some information from a kernel developer on how to debug this would be very useful. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1298972 Title: stacktrace in ext4: /build/buildd/linux-3.13.0/fs/ext4/ext4_jbd2.c:259 __ext4_handle_dirty_metadata+0x1a2/0x1c0() Status in linux package in Ubuntu: Confirmed Bug description: I was running an apt-get dist-upgrade when the FS suddenly remounted to RO. The 2 audit lines are from apt-dater running successively apt- get update and apt-get dist-upgrade: [153439.007924] type=1006 audit(1396010484.706:46): pid=16029 uid=0 old auid=4294967295 new auid=104 old ses=4294967295 new ses=9 res=1 [153502.372488] type=1006 audit(1396010548.070:47): pid=16086 uid=0 old auid=4294967295 new auid=104 old ses=4294967295 new ses=10 res=1 [153523.874714] EXT4-fs error (device vda1): ext4_mb_generate_buddy:756: group 1, 6475 clusters in bitmap, 6473 in gd; block bitmap corrupt. [153523.876361] Aborting journal on device vda1-8. [153523.889719] EXT4-fs error (device vda1): ext4_journal_check_start:56: Detected aborted journal [153523.890881] EXT4-fs (vda1): Remounting filesystem read-only [153523.891574] EXT4-fs (vda1): Remounting filesystem read-only [153523.892301] [ cut here ] [153523.892341] WARNING: CPU: 0 PID: 16129 at /build/buildd/linux-3.13.0/fs/ext4/ext4_jbd2.c:259 __ext4_handle_dirty_metadata+0x1a2/0x1c0() [153523.892342] Modules linked in: nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_owner xt_conntrack nf_conntrack iptable_filter ip_tables x_tables psmouse serio_raw floppy [153523.892400] CPU: 0 PID: 16129 Comm: dpkg Not tainted 3.13.0-19-generic #40-Ubuntu [153523.892401] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [153523.892406] 0009 88a97ad0 81711075 [153523.892408] 88a97b08 810662cd 88000aca3d00 [153523.892410] 88000a653000 81835280 12ea 88a97b18 [153523.892412] Call Trace: [153523.892444] [81711075] dump_stack+0x45/0x56 [153523.892461] [810662cd] warn_slowpath_common+0x7d/0xa0 [153523.892463] [810663aa] warn_slowpath_null+0x1a/0x20 [153523.892466] [81268112] __ext4_handle_dirty_metadata+0x1a2/0x1c0 [153523.892483] [81240eca] ? ext4_dirty_inode+0x2a/0x60 [153523.892486] [812707d6] ext4_free_blocks+0x646/0xbf0 [153523.892488] [81261ec5] ext4_ext_rm_leaf+0x4a5/0x860 [153523.892490] [81260f87] ? __ext4_ext_check+0x197/0x330 [153523.892492] [812645e0] ? ext4_ext_remove_space+0xc0/0x7e0 [153523.892494] [8126483c] ext4_ext_remove_space+0x31c/0x7e0 [153523.892496] [81266bb0] ext4_ext_truncate+0xb0/0xe0 [153523.892498] [8123f339] ext4_truncate+0x379/0x3c0 [153523.892500] [8123fef1] ext4_evict_inode+0x491/0x4f0 [153523.892514] [811d3ac0] evict+0xb0/0x1b0 [153523.892516] [811d42d5] iput+0xf5/0x180 [153523.892525] [811c8cfe] do_unlinkat+0x18e/0x2b0 [153523.892537] [81020d25] ? syscall_trace_enter+0x145/0x250 [153523.892539] [811c9c56] SyS_unlink+0x16/0x20 [153523.892545] [81721c7f] tracesys+0xe1/0xe6 [153523.892547] ---[ end trace 9b25f1487620e754 ]--- [153523.892582] BUG: unable to handle kernel NULL pointer dereference at 0028 [153523.893579] IP: [81256fa1] __ext4_error_inode+0x31/0x160 [153523.894350] PGD a06c067 PUD 819d067 PMD 0 [153523.894933] Oops: [#1] SMP [153523.895397] Modules linked in: nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_owner xt_conntrack nf_conntrack iptable_filter ip_tables x_tables psmouse serio_raw floppy [153523.896276] CPU: 0 PID: 16129 Comm: dpkg Tainted: GW 3.13.0-19-generic #40-Ubuntu [153523.896276] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [153523.896276] task: 880009455fc0 ti: 88a96000 task.ti: 88a96000 [153523.896276] RIP: 0010:[81256fa1] [81256fa1] __ext4_error_inode+0x31/0x160 [153523.896276] RSP: 0018:88a97a88
[Kernel-packages] [Bug 1398533] Re: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10
Amordea Whiteoak, the next step is to fully reverse commit bisect from kernel 3.16 to 3.18-rc7 in order to identify the last bad commit, followed immediately by the first good one that improves on your touchpad features. Once this commit has been identified, then it may be reviewed as a candidate for backporting into your release. Could you please do this following https://wiki.ubuntu.com/Kernel/KernelBisection#How_do_I_reverse_bisect_the_upstream_kernel.3F ? Please note, finding adjacent kernel versions is not fully commit bisecting. Thank you for your understanding. Helpful bug reporting tips: https://wiki.ubuntu.com/ReportingBugs ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1398533 Title: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10 Status in linux package in Ubuntu: Incomplete Bug description: Edit: This bug is a possible duplicate of bug #1394869 So far, from what I can gather, the clickpad functions normally when using the touchpad portion to maneuver the onscreen pointer. However, the act of using one of the hardware click buttons causes it to malfunction. To test, I ran: xinput --test 11 and the output given shows a rapid stream of positioning data prior to the click, then no data after the click, however the mouse pointer appears to continue to move. However attempting to click on anything with the pointer after the first click of the clickpad registers as a click in the same location with either the clickpad or an external mouse until the clickpad is disabled with: xinput set-prop 11 Device Enabled 0 which of course causes the clickpad to cease function, however the USB mouse then continues to work normally. If you would like for me to perform any other tests, please let me know what I can try. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: amordea1737 F lxpanel CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: LXDE Date: Tue Dec 2 15:13:05 2014 HibernationDevice: RESUME=UUID=9d5cbd54-017f-45dc-a33f-f15e7196661a InstallationDate: Installed on 2014-12-02 (0 days ago) InstallationMedia: Lubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: Hewlett-Packard HP Stream Notebook PC 11 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=40a60a52-d575-4dd8-9425-7c22dbee89bd ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/25/2014 dmi.bios.vendor: Insyde dmi.bios.version: F.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8023 dmi.board.vendor: Hewlett-Packard dmi.board.version: 54.0D dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.02:bd09/25/2014:svnHewlett-Packard:pnHPStreamNotebookPC11:pvrType1-ProductConfigId:rvnHewlett-Packard:rn8023:rvr54.0D:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Stream Notebook PC 11 dmi.product.version: Type1 - ProductConfigId dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398533/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1397699] Re: [Dell Latitude 2110] Clicking brightness key once increments brightness as if pressed multiple times
A workaround: the extra key events can be disabled by creating /etc/udev/hwdb.d/70-keyboard.hwdb containing: keyboard:dmi:bvn*:bvr*:bd*:svnDell*:pnLatitude*2110:pvr* KEYBOARD_KEY_85=unknown # Brightness Down, also emitted by acpi-video, ignore KEYBOARD_KEY_86=unknown # Brightness Up, also emitted by acpi-video, ignore This is based on the existing rules for the Dell Inspiron 1520. If I also disable video.brightness_switch_enabled, then I get a backlight that changes brightness by one step for each keypress. I have had two rather worrying hangs while testing this, though. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1397699 Title: [Dell Latitude 2110] Clicking brightness key once increments brightness as if pressed multiple times Status in linux package in Ubuntu: Triaged Bug description: According to https://wiki.ubuntu.com/Hotkeys/Troubleshooting, If the events are reported by more than one input device then report a kernel bug (Ubuntu linux package) because it should only send the event on one device. On my Latitude 2110, the brightness control keys (Fn+Up and Fn+Down) seem to appear through two different devices, /dev/input/event3 (AT Translated Set 2 keyboard) and /dev/input/event4 (Video Bus). The keys also control the screen brightness, even in a text console. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.16.0-25-generic 3.16.0-25.33~14.04.2 ProcVersionSignature: Ubuntu 3.16.0-25.33~14.04.2-generic 3.16.7 Uname: Linux 3.16.0-25-generic i686 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: i386 CurrentDesktop: Unity Date: Sun Nov 30 17:02:52 2014 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-motts-20100121-3 EcryptfsInUse: Yes InstallationDate: Installed on 2010-06-09 (1635 days ago) InstallationMedia: Ubuntu GNU/Linux 9.10 Karmic - Build i386 LIVE Binary 20100121-21:52 SourcePackage: linux-lts-utopic UpgradeStatus: Upgraded to trusty on 2014-08-15 (106 days ago) --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: bjh21 2495 F pulseaudio CurrentDesktop: Unity DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-motts-20100121-3 DistroRelease: Ubuntu 14.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=5f11e886-4c98-43d9-8d51-6ab48f0bff3f InstallationDate: Installed on 2010-06-09 (1636 days ago) InstallationMedia: Ubuntu GNU/Linux 9.10 Karmic - Build i386 LIVE Binary 20100121-21:52 MachineType: Dell Inc. Latitude 2110 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic root=UUID=a7f66818-5a12-4932-922a-b05d92593b24 ro quiet splash crashkernel=384M-:128M crashkernel=384M-:128M vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-25.33~14.04.2-generic 3.16.7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.127.8 StagingDrivers: rts5208 Tags: trusty staging Uname: Linux 3.16.0-25-generic i686 UpgradeStatus: Upgraded to trusty on 2014-08-15 (108 days ago) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare wireshark WifiSyslog: Dec 1 21:57:47 sole kernel: [ 713.837172] init: systemd-logind main process (504) killed by TERM signal Dec 1 21:57:58 sole kernel: [ 724.781339] systemd-udevd[5391]: starting version 204 _MarkForUpload: True dmi.bios.date: 03/09/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A00 dmi.board.name: 0N61H4 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA00:bd03/09/2010:svnDellInc.:pnLatitude2110:pvr:rvnDellInc.:rn0N61H4:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Latitude 2110 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1397699/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1362584] Re: [HP 255 G1 Notebook PC] Synaptics Touchpad not Working after upgrade from 12.04.1 LTS to 14.04.1 LTS
Christopher M. Penalver (penalvch), the touchpad only works when the system is booted directly from the live dvds I have tried. These are 12.04.0 and 14.04.1. It doesn't work on any kernel when booted from the hard drive. Just to reiterate, the touchpad did work when purchased earlier this year. It came preinstalled with 12.04.1 LTS and the latest kernel it was working on was 3.5.0-54. The touchpad will not work now when booted from 3.5.0-54. Hence my comment on update #22 that it seemed more like an upgrade/ configuration issue. I started off on this route months ago and the best advice seemed to be to rebuild the system from scratch. I followed all the advice about raising bugs and how to determine what category it should be and all this led me to believe that it was a kernel issue. There seems to be a lot more information available now regarding touchpad issues in general and it was this that led me to the comments on #23 and #24. Hope this helps Regards ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1362584 Title: [HP 255 G1 Notebook PC] Synaptics Touchpad not Working after upgrade from 12.04.1 LTS to 14.04.1 LTS Status in linux package in Ubuntu: Confirmed Bug description: Have only just bought this laptop. WORKAROUND: Touchpad worked fine in non UEFI mode. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-34-generic 3.13.0-34.60 ProcVersionSignature: Ubuntu 3.13.0-34.60-generic 3.13.11.4 Uname: Linux 3.13.0-34-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: paul 2101 F pulseaudio /dev/snd/controlC0: paul 2101 F pulseaudio CurrentDesktop: Unity Date: Thu Aug 28 12:55:56 2014 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-stella-anaheim-precise-amd64-20130424-1 HibernationDevice: RESUME=UUID=116415ec-3f46-402a-a2a4-aebd87698d48 InstallationDate: Installed on 2014-03-05 (175 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20130424-09:51 MachineType: Hewlett-Packard HP 255 G1 Notebook PC ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-34-generic root=UUID=f42726b4-109b-4962-ae3b-009bfb6543b0 ro i915.modeset=1 quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-34-generic N/A linux-backports-modules-3.13.0-34-generic N/A linux-firmware 1.127.5 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-08-16 (11 days ago) dmi.bios.date: 06/26/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.37 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 188B dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 69.18 dmi.chassis.asset.tag: 5CG410D2QY dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.37:bd06/26/2013:svnHewlett-Packard:pnHP255G1NotebookPC:pvr088E1300591600010:rvnHewlett-Packard:rn188B:rvrKBCVersion69.18:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP 255 G1 Notebook PC dmi.product.version: 088E1300591600010 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1362584/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1293134] Re: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open
Tested on most recent mainline kernel version 3.18.0-rc7 and the bug is still present. ** Tags added: kernel-bug-exists-upstream kernel-bug-exists- upstream-3.18-rc7 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1293134 Title: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open Status in linux package in Ubuntu: Incomplete Bug description: Hi, in Windows closing the lid makes it going to sleep and opening the lid makes it resuming. I am using Ubuntu 13.10 on my Samsung Series 7 Chronos 700Z3A-S02DE. When I close the lid the laptop suspends, but on lid open it does not resume until I press the power button. With acpi_listen I see that it fires and recognizes the events for lid close and open and /proc/acpi/button/lid/LID0/state shows the correct state for each lid position. With acpid -d -f -l I see that those events trigger /etc/acpi/events/. I wrote an event that matches lid close/open and calls pm-suspend. But this does not make the laptop resume. I also uncommented the lines in /etc/systemd/logind.conf regarding hibernate and suspend. But this does not work either. So my problem is that the system receivs and understand those ACPI events triggered from the lid actions. But LID0 is not configured as /etc/acpi/wakeup device. Nor echoing it into the file does make it appearing there. So I am at the end of my knowledge and understanding of the ACPI event handling. I've already tried to pass different acpi_osi Strings with grub but the ACPI table does not change nor make it any difference for the suspend/resume problem. If I can give any further information please just ask me to. Thank you. --- ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2013-12-02 (104 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MarkForUpload: True NonfreeKernelModules: wl Package: pm-utils 1.4.1-12ubuntu1 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.11.0-18.32-generic 3.11.10.4 Tags: saucy Uname: Linux 3.11.0-18-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lars 4065 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=63d413ce-f76a-4aef-8728-6b94c8328c5a InstallationDate: Installed on 2014-11-19 (16 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: SAMSUNG ELECTRONICS CO., LTD. 700Z3A/700Z4A/700Z5A/700Z5B NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-25-generic root=UUID=44843d26-d39a-43f4-bfd7-bb8b6bb69a91 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-25-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/06/2012 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: 15FD dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvr15FD:bd11/06/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pn700Z3A/700Z4A/700Z5A/700Z5B:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rn700Z3A/700Z4A/700Z5A/700Z5B:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1293134/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1313754] Re: [HP Pavilion dv6-6c80el Entertainment Notebook PC] PrintScreen button does nothing.
Dear Christopher M. Penalver, The same thing happens when running the kernel v3.11.10.15-saucy. I.e. I am only able to take a printscreen when using the key combination fn+del. Below is the command to confirm I was running the kernel you asked. $ uname -r 3.11.10-03111015-generic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1313754 Title: [HP Pavilion dv6-6c80el Entertainment Notebook PC] PrintScreen button does nothing. Status in linux package in Ubuntu: Incomplete Bug description: When pressed, PrintScreen button does nothing. WORKAROUND: I am able to take a PrintScreen when I press the key combination Fn+Del. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-generic (not installed) ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: arthurhe 2037 F pulseaudio CurrentDesktop: Unity Date: Mon Apr 28 16:20:39 2014 HibernationDevice: RESUME=UUID=2def0040-b618-4809-b4d2-8d79183bab09 InstallationDate: Installed on 2013-10-23 (187 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MachineType: Hewlett-Packard HP Pavilion dv6 Notebook PC ProcFB: 0 inteldrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-14-generic root=UUID=275c1508-c6aa-4a9a-9a02-1045f73fc0fb ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-14-generic N/A linux-backports-modules-3.11.0-14-generic N/A linux-firmware 1.127 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-19 (9 days ago) dmi.bios.date: 01/23/2013 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.1C dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 17FA dmi.board.vendor: Hewlett-Packard dmi.board.version: 10.5A dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnHewlett-Packard:bvrF.1C:bd01/23/2013:svnHewlett-Packard:pnHPPaviliondv6NotebookPC:pvr06912120461620100:rvnHewlett-Packard:rn17FA:rvr10.5A:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion dv6 Notebook PC dmi.product.version: 06912120461620100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1313754/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1245226] Re: HDMI: audio-video playback too fast
I'm having the same problem ... on a Shuttle XH97V 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1245226 Title: HDMI: audio-video playback too fast Status in linux package in Ubuntu: Invalid Bug description: After upgrading to Ubuntu 13.10, selecting HDMI as audio output device is broken. Audio is played back at high speed. When playing back video clips, the video frames are also too fast. Note that, when selecting headphone as audio output device, everything works. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: gnome-control-center 1:3.6.3-0ubuntu44 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 Date: Sun Oct 27 18:00:53 2013 ExecutablePath: /usr/bin/gnome-control-center InstallationDate: Installed on 2010-11-07 (1085 days ago) InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release amd64 (20101007) MarkForUpload: True SourcePackage: gnome-control-center UpgradeStatus: Upgraded to saucy on 2013-10-22 (5 days ago) usr_lib_gnome-control-center: activity-log-manager 0.9.7-0ubuntu4 deja-dup 27.3.1-0ubuntu1 gnome-control-center-datetime 13.10.0+13.10.20131016.2-0ubuntu1 gnome-control-center-signon 0.1.7~+13.10.20130724.1-0ubuntu1 gnome-control-center-unity1.3+13.10.20131004-0ubuntu1 --- ApportVersion: 2.12.6-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2831 F pulseaudio /dev/snd/controlC0: ubuntu 2831 F pulseaudio /dev/snd/pcmC0D0c: ubuntu 2831 F...m pulseaudio CasperVersion: 1.336ubuntu1 CurrentDmesg: [ 60.513505] systemd-hostnamed[5239]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 63.157819] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) DistroRelease: Ubuntu 14.04 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20131103) MachineType: MSI MS-7623 MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.12.0-1.3-generic 3.12.0-rc7 RelatedPackageVersions: linux-restricted-modules-3.12.0-1-generic N/A linux-backports-modules-3.12.0-1-generic N/A linux-firmware1.117 RfKill: Tags: trusty Uname: Linux 3.12.0-1-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/10/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V11.5 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: 880GM-E41 (MS-7623) dmi.board.vendor: MSI dmi.board.version: 2.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 2.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV11.5:bd08/10/2010:svnMSI:pnMS-7623:pvr2.0:rvnMSI:rn880GM-E41(MS-7623):rvr2.0:cvnMSI:ct3:cvr2.0: dmi.product.name: MS-7623 dmi.product.version: 2.0 dmi.sys.vendor: MSI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1245226/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1136110] Re: USB Audio Codec choppy playback
To keep this brief - I'm an idiot. It's all my own fault. Sorry for wasting people's time reading my scribbles. Now the longer version. I did some extensive tests, playing local music via VLC - OK. Remote server music via VLC and foobar (under wine) - Not OK. Internet music (Firefox, BBC radio streams) - Not OK. Ethernet vs Wi-Fi - no difference. I then looked at my notes for any modifications I might have made in the past, and there it was. I had changed the default pulse-audio bit rate in /etc/pulse/daemon.conf to suit another application using a different output device. My memory being what it is (age...) I had totally forgotten. Reverting to standard fixed the problem. I don't really understand why local music under VLC was OK and other's not, but no matter. The problem has gone away. Now I shall go away and hide -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1136110 Title: USB Audio Codec choppy playback Status in linux package in Ubuntu: Fix Released Bug description: 1) The release of Ubuntu using Ubuntu 12.10 AMD64. Ubuntu 13.04 AMD64, daily build as new as 20130314. 2) The version of the package used linux-image-3.5.0-26-generic linux-image-3.5.7-03050706-generic_3.5.7-03050706.201302221435_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.5.7.6-quantal/ linux-image-3.7.7-030707-generic_3.7.7-030707.201302111436_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.7.7-raring/ linux-image-3.8.0-030800rc7-generic_3.8.0-030800rc7.201302081635_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.8-rc7-raring/ This bug had been confirmed appearing after the following kernel upgrade step: v3.5.0-25 v3.5.0-26 ~ v3.5.0-27 v3.5.7.5 v3.5.7.6 ~ v3.5.7.8 v3.7.6 v3.7.7 ~ v3.7.10 v3.8.0-rc6 v3.8.0-rc7 ~ v3.8.5 The v3.9 branch has been affected since its very first release. v3.9-rc1, v3.9-rc2, v3.9-rc3 v3.9-rc4 are all affected. 3) What you expected to happen When using a USB DAC to play audio, the audio should be played normally without any interruption. 4) What happened instead This bug seems to affect only a certain kind of hardware, which is called Asynchronous USB Digital Audio Codec (DAC). It's said that such a DAC hosts the clock itself (USB Device Host). An ordinary DAC, so called Synchronous USB DAC, uses the clock hosted by the mother board, which is not affected by this bug. When this bug affects an asynchronous USB DAC, the audio played by the DAC is constantly interrupted. The playback itself does not stop, but the output becomes discontinous, filling with constant crackling noises, destroying everything the DAC plays. Using CLI command grep device.buffering to get the buffer from the devices, those affected kernels are reporting back a different number to the unaffected devices. The choppy noise is very similar to the situation when buffer size is not correctly set. I have tested four USB DACs, two Asynchronous and two Synchronous. Only the Asynchronous ones are affected by this bug. Affected Devices: Arce MDAC5 Arce MDAC mini Ayre Acoustics QB-9 Dragonfly USB DAC Musical Fidelity v2 DAC USB Audio Streaming Controller on affected devices: Texas Instrument TAS1020 http://www.ti.com/product/tas1020 Audio DAC on affected devices: Texas Instruments PCM1742 http://www.ti.com/product/pcm1742 This bug had been confirmed appearing after the following kernel upgrade step: 3.5.0-25 3.5.0-26 3.5.7.5 3.5.7.6 (and all 3.5.7.x above) 3.7.6 3.7.7 (and all 3.7.x above) 3.8.0-rc6 3.8.0-rc7 (and all 3.8.x above) I used Kdiff to find the similar patches, and find the following patches suspicous: USB: XHCI: fix memory leak of URB-private data (appeared in 3.5.7.6/3.7.7/3.8.0-rc7) USB: EHCI: fix for leaking isochronous data (appeared in 3.7.7/3.8.0-rc7) usb: Prevent dead ports when xhci is not enabled (appeared in 3.5.7.6/3.7.7/3.8.0-rc7) usb: Using correct way to clear usb3.0 device's remote wakeup feature (appeared in 3.5.7.6/3.7.7/3.8.0-rc7) USB: EHCI: remove ASS/PSS polling timeout (appeared in 3.7.7/3.8.0-rc7) USB: EHCI: unlink one async QH at a time (appeared in 3.7.7/3.8.0-rc7) USB: EHCI: fix timer bug affecting port resume (appeared in 3.5.7.6/3.7.7/3.8.0-rc7) USB: EHCI: fix bug in scheduling periodic split transfers (appeared in 3.5.7.6/3.7.7/3.8.0-rc7) Hope someone can look into this bug soon! --- ApportVersion: 2.6.1-0ubuntu10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: tysontan 2117 F pulseaudio /dev/snd/controlC1: tysontan 2117 F pulseaudio /dev/snd/pcmC1D0p: tysontan 2117 F...m pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 12.10
[Kernel-packages] [Bug 1388279] Re: suspend hangs when unloading module
apport information ** Tags added: apport-collected ** Description changed: a few user report problems after upgrading to 14.10. After resume or supend the touchpad is dead. un-reloading hid_multitouch solves the issue. however putting the module name into 00sleep_modules prevents sleep mode (computer hangs) (making a typing error like hid_modu and it works again) Unfortunately I have no clue how to get more detailed information ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: KDE Date: Fri Oct 31 23:32:13 2014 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) + --- + ApportVersion: 2.14.7-0ubuntu8 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: jott 3850 F pulseaudio + /dev/snd/seq:timidity 2549 F timidity + DistroRelease: Ubuntu 14.10 + HibernationDevice: RESUME=UUID=c79bd9d4-ded9-43e5-a7e9-d20c0306f05d + Lsusb: + Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub + Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd + Bus 001 Device 007: ID 04ca:300b Lite-On Technology Corp. + Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB + Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + MachineType: Acer Aspire E3-112 + Package: linux (not installed) + ProcEnviron: + LANGUAGE=de_DE + TERM=xterm + PATH=(custom, no user) + LANG=de_DE.UTF-8 + SHELL=/bin/bash + ProcFB: 0 inteldrmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=d1602f47-e8a7-4a27-8243-cdf4e5101413 ro quiet splash acpi_osi=Linux vt.handoff=7 + ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 + PulseList: + Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied + No PulseAudio daemon running, or not running as session daemon. + RelatedPackageVersions: + linux-restricted-modules-3.16.0-24-generic N/A + linux-backports-modules-3.16.0-24-generic N/A + linux-firmware 1.138 + Tags: utopic + Uname: Linux 3.16.0-24-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: + + WifiSyslog: + + _MarkForUpload: True + dmi.bios.date: 07/22/2014 + dmi.bios.vendor: Insyde Corp. + dmi.bios.version: V1.03 + dmi.board.asset.tag: Type2 - Board Asset Tag + dmi.board.name: R2 + dmi.board.vendor: Acer + dmi.board.version: Type2 - A01 Board Version + dmi.chassis.type: 10 + dmi.chassis.vendor: Chassis Manufacturer + dmi.chassis.version: Chassis Version + dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.03:bd07/22/2014:svnAcer:pnAspireE3-112:pvrV1.03:rvnAcer:rnR2:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: + dmi.product.name: Aspire E3-112 + dmi.product.version: V1.03 + dmi.sys.vendor: Acer ** Attachment added: AlsaInfo.txt https://bugs.launchpad.net/bugs/1388279/+attachment/4275636/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1388279 Title: suspend hangs when unloading module Status in linux package in Ubuntu: Incomplete Bug description: a few user report problems after upgrading to 14.10. After resume or supend the touchpad is dead. un-reloading hid_multitouch solves the issue. however putting the module name into 00sleep_modules prevents sleep mode (computer hangs) (making a typing error like hid_modu and it works again) Unfortunately I have no clue how to get more detailed information ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: KDE Date: Fri Oct 31 23:32:13 2014 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jott 3850 F pulseaudio /dev/snd/seq:timidity 2549 F timidity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=c79bd9d4-ded9-43e5-a7e9-d20c0306f05d Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 007: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire E3-112 Package: linux
[Kernel-packages] [Bug 1388279] UdevDb.txt
apport information ** Attachment added: UdevDb.txt https://bugs.launchpad.net/bugs/1388279/+attachment/4275646/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1388279 Title: suspend hangs when unloading module Status in linux package in Ubuntu: Incomplete Bug description: a few user report problems after upgrading to 14.10. After resume or supend the touchpad is dead. un-reloading hid_multitouch solves the issue. however putting the module name into 00sleep_modules prevents sleep mode (computer hangs) (making a typing error like hid_modu and it works again) Unfortunately I have no clue how to get more detailed information ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: KDE Date: Fri Oct 31 23:32:13 2014 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jott 3850 F pulseaudio /dev/snd/seq:timidity 2549 F timidity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=c79bd9d4-ded9-43e5-a7e9-d20c0306f05d Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 007: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire E3-112 Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=d1602f47-e8a7-4a27-8243-cdf4e5101413 ro quiet splash acpi_osi=Linux vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-24-generic N/A linux-backports-modules-3.16.0-24-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: WifiSyslog: _MarkForUpload: True dmi.bios.date: 07/22/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.03 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: R2 dmi.board.vendor: Acer dmi.board.version: Type2 - A01 Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.03:bd07/22/2014:svnAcer:pnAspireE3-112:pvrV1.03:rvnAcer:rnR2:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: Aspire E3-112 dmi.product.version: V1.03 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1388279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1388279] IwConfig.txt
apport information ** Attachment added: IwConfig.txt https://bugs.launchpad.net/bugs/1388279/+attachment/4275640/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1388279 Title: suspend hangs when unloading module Status in linux package in Ubuntu: Incomplete Bug description: a few user report problems after upgrading to 14.10. After resume or supend the touchpad is dead. un-reloading hid_multitouch solves the issue. however putting the module name into 00sleep_modules prevents sleep mode (computer hangs) (making a typing error like hid_modu and it works again) Unfortunately I have no clue how to get more detailed information ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: KDE Date: Fri Oct 31 23:32:13 2014 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jott 3850 F pulseaudio /dev/snd/seq:timidity 2549 F timidity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=c79bd9d4-ded9-43e5-a7e9-d20c0306f05d Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 007: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire E3-112 Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=d1602f47-e8a7-4a27-8243-cdf4e5101413 ro quiet splash acpi_osi=Linux vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-24-generic N/A linux-backports-modules-3.16.0-24-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: WifiSyslog: _MarkForUpload: True dmi.bios.date: 07/22/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.03 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: R2 dmi.board.vendor: Acer dmi.board.version: Type2 - A01 Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.03:bd07/22/2014:svnAcer:pnAspireE3-112:pvrV1.03:rvnAcer:rnR2:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: Aspire E3-112 dmi.product.version: V1.03 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1388279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1388279] ProcInterrupts.txt
apport information ** Attachment added: ProcInterrupts.txt https://bugs.launchpad.net/bugs/1388279/+attachment/4275643/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1388279 Title: suspend hangs when unloading module Status in linux package in Ubuntu: Incomplete Bug description: a few user report problems after upgrading to 14.10. After resume or supend the touchpad is dead. un-reloading hid_multitouch solves the issue. however putting the module name into 00sleep_modules prevents sleep mode (computer hangs) (making a typing error like hid_modu and it works again) Unfortunately I have no clue how to get more detailed information ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: KDE Date: Fri Oct 31 23:32:13 2014 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jott 3850 F pulseaudio /dev/snd/seq:timidity 2549 F timidity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=c79bd9d4-ded9-43e5-a7e9-d20c0306f05d Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 007: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire E3-112 Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=d1602f47-e8a7-4a27-8243-cdf4e5101413 ro quiet splash acpi_osi=Linux vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-24-generic N/A linux-backports-modules-3.16.0-24-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: WifiSyslog: _MarkForUpload: True dmi.bios.date: 07/22/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.03 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: R2 dmi.board.vendor: Acer dmi.board.version: Type2 - A01 Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.03:bd07/22/2014:svnAcer:pnAspireE3-112:pvrV1.03:rvnAcer:rnR2:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: Aspire E3-112 dmi.product.version: V1.03 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1388279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1388279] ProcModules.txt
apport information ** Attachment added: ProcModules.txt https://bugs.launchpad.net/bugs/1388279/+attachment/4275644/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1388279 Title: suspend hangs when unloading module Status in linux package in Ubuntu: Incomplete Bug description: a few user report problems after upgrading to 14.10. After resume or supend the touchpad is dead. un-reloading hid_multitouch solves the issue. however putting the module name into 00sleep_modules prevents sleep mode (computer hangs) (making a typing error like hid_modu and it works again) Unfortunately I have no clue how to get more detailed information ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: KDE Date: Fri Oct 31 23:32:13 2014 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jott 3850 F pulseaudio /dev/snd/seq:timidity 2549 F timidity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=c79bd9d4-ded9-43e5-a7e9-d20c0306f05d Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 007: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire E3-112 Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=d1602f47-e8a7-4a27-8243-cdf4e5101413 ro quiet splash acpi_osi=Linux vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-24-generic N/A linux-backports-modules-3.16.0-24-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: WifiSyslog: _MarkForUpload: True dmi.bios.date: 07/22/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.03 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: R2 dmi.board.vendor: Acer dmi.board.version: Type2 - A01 Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.03:bd07/22/2014:svnAcer:pnAspireE3-112:pvrV1.03:rvnAcer:rnR2:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: Aspire E3-112 dmi.product.version: V1.03 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1388279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1388279] CRDA.txt
apport information ** Attachment added: CRDA.txt https://bugs.launchpad.net/bugs/1388279/+attachment/4275638/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1388279 Title: suspend hangs when unloading module Status in linux package in Ubuntu: Incomplete Bug description: a few user report problems after upgrading to 14.10. After resume or supend the touchpad is dead. un-reloading hid_multitouch solves the issue. however putting the module name into 00sleep_modules prevents sleep mode (computer hangs) (making a typing error like hid_modu and it works again) Unfortunately I have no clue how to get more detailed information ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: KDE Date: Fri Oct 31 23:32:13 2014 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jott 3850 F pulseaudio /dev/snd/seq:timidity 2549 F timidity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=c79bd9d4-ded9-43e5-a7e9-d20c0306f05d Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 007: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire E3-112 Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=d1602f47-e8a7-4a27-8243-cdf4e5101413 ro quiet splash acpi_osi=Linux vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-24-generic N/A linux-backports-modules-3.16.0-24-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: WifiSyslog: _MarkForUpload: True dmi.bios.date: 07/22/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.03 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: R2 dmi.board.vendor: Acer dmi.board.version: Type2 - A01 Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.03:bd07/22/2014:svnAcer:pnAspireE3-112:pvrV1.03:rvnAcer:rnR2:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: Aspire E3-112 dmi.product.version: V1.03 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1388279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1388279] CurrentDmesg.txt
apport information ** Attachment added: CurrentDmesg.txt https://bugs.launchpad.net/bugs/1388279/+attachment/4275639/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1388279 Title: suspend hangs when unloading module Status in linux package in Ubuntu: Incomplete Bug description: a few user report problems after upgrading to 14.10. After resume or supend the touchpad is dead. un-reloading hid_multitouch solves the issue. however putting the module name into 00sleep_modules prevents sleep mode (computer hangs) (making a typing error like hid_modu and it works again) Unfortunately I have no clue how to get more detailed information ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: KDE Date: Fri Oct 31 23:32:13 2014 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jott 3850 F pulseaudio /dev/snd/seq:timidity 2549 F timidity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=c79bd9d4-ded9-43e5-a7e9-d20c0306f05d Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 007: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire E3-112 Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=d1602f47-e8a7-4a27-8243-cdf4e5101413 ro quiet splash acpi_osi=Linux vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-24-generic N/A linux-backports-modules-3.16.0-24-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: WifiSyslog: _MarkForUpload: True dmi.bios.date: 07/22/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.03 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: R2 dmi.board.vendor: Acer dmi.board.version: Type2 - A01 Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.03:bd07/22/2014:svnAcer:pnAspireE3-112:pvrV1.03:rvnAcer:rnR2:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: Aspire E3-112 dmi.product.version: V1.03 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1388279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1388279] UdevLog.txt
apport information ** Attachment added: UdevLog.txt https://bugs.launchpad.net/bugs/1388279/+attachment/4275647/+files/UdevLog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1388279 Title: suspend hangs when unloading module Status in linux package in Ubuntu: Incomplete Bug description: a few user report problems after upgrading to 14.10. After resume or supend the touchpad is dead. un-reloading hid_multitouch solves the issue. however putting the module name into 00sleep_modules prevents sleep mode (computer hangs) (making a typing error like hid_modu and it works again) Unfortunately I have no clue how to get more detailed information ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: KDE Date: Fri Oct 31 23:32:13 2014 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jott 3850 F pulseaudio /dev/snd/seq:timidity 2549 F timidity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=c79bd9d4-ded9-43e5-a7e9-d20c0306f05d Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 007: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire E3-112 Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=d1602f47-e8a7-4a27-8243-cdf4e5101413 ro quiet splash acpi_osi=Linux vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-24-generic N/A linux-backports-modules-3.16.0-24-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: WifiSyslog: _MarkForUpload: True dmi.bios.date: 07/22/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.03 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: R2 dmi.board.vendor: Acer dmi.board.version: Type2 - A01 Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.03:bd07/22/2014:svnAcer:pnAspireE3-112:pvrV1.03:rvnAcer:rnR2:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: Aspire E3-112 dmi.product.version: V1.03 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1388279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1388279] ProcCpuinfo.txt
apport information ** Attachment added: ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1388279/+attachment/4275642/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1388279 Title: suspend hangs when unloading module Status in linux package in Ubuntu: Incomplete Bug description: a few user report problems after upgrading to 14.10. After resume or supend the touchpad is dead. un-reloading hid_multitouch solves the issue. however putting the module name into 00sleep_modules prevents sleep mode (computer hangs) (making a typing error like hid_modu and it works again) Unfortunately I have no clue how to get more detailed information ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: KDE Date: Fri Oct 31 23:32:13 2014 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jott 3850 F pulseaudio /dev/snd/seq:timidity 2549 F timidity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=c79bd9d4-ded9-43e5-a7e9-d20c0306f05d Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 007: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire E3-112 Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=d1602f47-e8a7-4a27-8243-cdf4e5101413 ro quiet splash acpi_osi=Linux vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-24-generic N/A linux-backports-modules-3.16.0-24-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: WifiSyslog: _MarkForUpload: True dmi.bios.date: 07/22/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.03 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: R2 dmi.board.vendor: Acer dmi.board.version: Type2 - A01 Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.03:bd07/22/2014:svnAcer:pnAspireE3-112:pvrV1.03:rvnAcer:rnR2:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: Aspire E3-112 dmi.product.version: V1.03 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1388279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1388279] Lspci.txt
apport information ** Attachment added: Lspci.txt https://bugs.launchpad.net/bugs/1388279/+attachment/4275641/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1388279 Title: suspend hangs when unloading module Status in linux package in Ubuntu: Incomplete Bug description: a few user report problems after upgrading to 14.10. After resume or supend the touchpad is dead. un-reloading hid_multitouch solves the issue. however putting the module name into 00sleep_modules prevents sleep mode (computer hangs) (making a typing error like hid_modu and it works again) Unfortunately I have no clue how to get more detailed information ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: KDE Date: Fri Oct 31 23:32:13 2014 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jott 3850 F pulseaudio /dev/snd/seq:timidity 2549 F timidity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=c79bd9d4-ded9-43e5-a7e9-d20c0306f05d Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 007: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire E3-112 Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=d1602f47-e8a7-4a27-8243-cdf4e5101413 ro quiet splash acpi_osi=Linux vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-24-generic N/A linux-backports-modules-3.16.0-24-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: WifiSyslog: _MarkForUpload: True dmi.bios.date: 07/22/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.03 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: R2 dmi.board.vendor: Acer dmi.board.version: Type2 - A01 Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.03:bd07/22/2014:svnAcer:pnAspireE3-112:pvrV1.03:rvnAcer:rnR2:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: Aspire E3-112 dmi.product.version: V1.03 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1388279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1388279] RfKill.txt
apport information ** Attachment added: RfKill.txt https://bugs.launchpad.net/bugs/1388279/+attachment/4275645/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1388279 Title: suspend hangs when unloading module Status in linux package in Ubuntu: Incomplete Bug description: a few user report problems after upgrading to 14.10. After resume or supend the touchpad is dead. un-reloading hid_multitouch solves the issue. however putting the module name into 00sleep_modules prevents sleep mode (computer hangs) (making a typing error like hid_modu and it works again) Unfortunately I have no clue how to get more detailed information ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: KDE Date: Fri Oct 31 23:32:13 2014 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jott 3850 F pulseaudio /dev/snd/seq:timidity 2549 F timidity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=c79bd9d4-ded9-43e5-a7e9-d20c0306f05d Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 007: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire E3-112 Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=d1602f47-e8a7-4a27-8243-cdf4e5101413 ro quiet splash acpi_osi=Linux vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-24-generic N/A linux-backports-modules-3.16.0-24-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: WifiSyslog: _MarkForUpload: True dmi.bios.date: 07/22/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.03 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: R2 dmi.board.vendor: Acer dmi.board.version: Type2 - A01 Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.03:bd07/22/2014:svnAcer:pnAspireE3-112:pvrV1.03:rvnAcer:rnR2:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: Aspire E3-112 dmi.product.version: V1.03 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1388279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1388279] BootDmesg.txt
apport information ** Attachment added: BootDmesg.txt https://bugs.launchpad.net/bugs/1388279/+attachment/4275637/+files/BootDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1388279 Title: suspend hangs when unloading module Status in linux package in Ubuntu: Incomplete Bug description: a few user report problems after upgrading to 14.10. After resume or supend the touchpad is dead. un-reloading hid_multitouch solves the issue. however putting the module name into 00sleep_modules prevents sleep mode (computer hangs) (making a typing error like hid_modu and it works again) Unfortunately I have no clue how to get more detailed information ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: KDE Date: Fri Oct 31 23:32:13 2014 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jott 3850 F pulseaudio /dev/snd/seq:timidity 2549 F timidity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=c79bd9d4-ded9-43e5-a7e9-d20c0306f05d Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 007: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire E3-112 Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=d1602f47-e8a7-4a27-8243-cdf4e5101413 ro quiet splash acpi_osi=Linux vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-24-generic N/A linux-backports-modules-3.16.0-24-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: WifiSyslog: _MarkForUpload: True dmi.bios.date: 07/22/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.03 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: R2 dmi.board.vendor: Acer dmi.board.version: Type2 - A01 Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.03:bd07/22/2014:svnAcer:pnAspireE3-112:pvrV1.03:rvnAcer:rnR2:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: Aspire E3-112 dmi.product.version: V1.03 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1388279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1213123] Re: 045e:009c [H87I-PLUS] Microsoft Keyboard Elite for Bluetooth dead keys problem
I want to upgrade to Trusty, but if I don't have keyboard or mouse, it will not be easy. As this problem occurs with another brand/model/usb adapter, I don't have any solution... Dongle detected, but Bluetooth don't activate itself... Just downloaded Trusty 14.04.1 and same problem. I can turn Bluetooth ON, but it stay like that, and when returning, Bluetooth is OFF. Any ideas on logs to check ? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1213123 Title: 045e:009c [H87I-PLUS] Microsoft Keyboard Elite for Bluetooth dead keys problem Status in bluez package in Ubuntu: New Bug description: In Precise with 4.60 version of bluez I can pair my keyboard and mouse perfectly, but not with the 4.98 that is in Precise by default. === The problem is that dead keys of my keyboard (I mean -L or R- CTRL, ALT, SUPER, -L or R- SHIFT, ALT-GR) doesn't work with my current motherboard (whether application I opened, console included). It does work correctly with other motherboards. The new motherboard is an 1150 Haswell one from Asus. What I can say is : 1/ When booting, my BIOS recognize perfectly the dead keys of my keyboard, meaning that the bluetooth dongle or the motherboard is not directly concerned. 2/ When doing a second installation of Ubuntu, same problem. 3/ When trying the option 'keyboard layout' (whatever layout I choose), I don't see those dead keys flashing, meaning the system doesn't react at all when pressing them. 4/ By chance, I found another keyboard (same model, same brand), same problem, meaning the keyboard is not concerned (it works on the older motherboard, then it was poor chance that the keyboard broked just before reinstalling). 5/ Tried the setxkbmap command (with sudo or without), nothing's better 6/ Tried the xmodmap command, I see the 0x codes for Left SHIFT, all dead keys are there (see attachment) 7/ Normal keyboard (no wireless) works perfectly 8/ Put the dongle on an other usb slot doesn't change anything 9/ Command xev doesn't makes changes when pressing dead keys. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.5.0-37-generic 3.5.0-37.58~precise1 ProcVersionSignature: Ubuntu 3.5.0-37.58~precise1-generic 3.5.7.16 Uname: Linux 3.5.0-37-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.25. ApportVersion: 2.0.1-0ubuntu17.4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lolo 2272 F pulseaudio /dev/snd/controlC0: lolo 2272 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. Card0.Amixer.info: Card hw:0 'MID'/'HDA Intel MID at 0xf0434000 irq 45' Mixer name : 'Intel Haswell HDMI' Components : 'HDA:80862807,80860101,0010' Controls : 6 Simple ctrls : 1 Card0.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Card1.Amixer.info: Card hw:1 'PCH'/'HDA Intel PCH at 0xf043 irq 46' Mixer name : 'Realtek ALC887-VD' Components : 'HDA:10ec0887,10438576,00100302' Controls : 41 Simple ctrls : 20 Date: Fri Aug 16 16:34:35 2013 HibernationDevice: RESUME=UUID=942aa693-ca21-4f2a-966c-97b0fa9ea5ae IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: ASUS All Series MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-37-generic root=UUID=9509f53e-1de4-4f9c-90dd-6c1ef7ded3a9 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.5.0-37-generic N/A linux-backports-modules-3.5.0-37-generic N/A linux-firmware1.79.6 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/15/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0306 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H87I-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0306:bd04/15/2013:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH87I-PLUS:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 CasperVersion: 1.336ubuntu1
[Kernel-packages] [Bug 1383184] Re: Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] not supported
Got the problem with the msi gs60 2qe -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1383184 Title: Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] not supported Status in linux package in Ubuntu: Confirmed Bug description: Card detail: Qualcomm Atheros Device [168c:003e] (rev 20) Subsystem: Bigfoot Networks, Inc. Device [1a56:1525] This is on a fully updated Ubuntu Server 14.04 installation, with the ubuntu-desktop environment installed. This happened in order to get the md raid drivers for raid0 on my system, as the desktop version doesn't support them. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: matanis2333 F pulseaudio /dev/snd/controlC0: matanis2333 F pulseaudio CRDA: Error: [Errno 2] No such file or directory CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=1b192ee3-f592-43e9-bdcf-08b91c0aa9b6 InstallationDate: Installed on 2014-10-16 (3 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) IwConfig: p2p1 no wireless extensions. lono wireless extensions. MachineType: Micro-Star International Co., Ltd. GT72 2QE NonfreeKernelModules: nvidia Package: linux (not installed) ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic.efi.signed root=UUID=80998dbb-1f89-4eda-be90-25e35e1c0a90 ro ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7 RelatedPackageVersions: linux-restricted-modules-3.13.0-37-generic N/A linux-backports-modules-3.13.0-37-generic N/A linux-firmware 1.127.7 RfKill: Tags: trusty Uname: Linux 3.13.0-37-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 09/15/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E1781IMS.10D dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: MS-1781 dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: REV:0.C dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrE1781IMS.10D:bd09/15/2014:svnMicro-StarInternationalCo.,Ltd.:pnGT722QE:pvrREV0.C:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1781:rvrREV0.C:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: GT72 2QE dmi.product.version: REV:0.C dmi.sys.vendor: Micro-Star International Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1383184/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1383184] Re: Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] not supported
** Also affects: linux Importance: Undecided Status: New ** No longer affects: linux -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1383184 Title: Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] not supported Status in linux package in Ubuntu: Confirmed Bug description: Card detail: Qualcomm Atheros Device [168c:003e] (rev 20) Subsystem: Bigfoot Networks, Inc. Device [1a56:1525] This is on a fully updated Ubuntu Server 14.04 installation, with the ubuntu-desktop environment installed. This happened in order to get the md raid drivers for raid0 on my system, as the desktop version doesn't support them. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: matanis2333 F pulseaudio /dev/snd/controlC0: matanis2333 F pulseaudio CRDA: Error: [Errno 2] No such file or directory CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=1b192ee3-f592-43e9-bdcf-08b91c0aa9b6 InstallationDate: Installed on 2014-10-16 (3 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) IwConfig: p2p1 no wireless extensions. lono wireless extensions. MachineType: Micro-Star International Co., Ltd. GT72 2QE NonfreeKernelModules: nvidia Package: linux (not installed) ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic.efi.signed root=UUID=80998dbb-1f89-4eda-be90-25e35e1c0a90 ro ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7 RelatedPackageVersions: linux-restricted-modules-3.13.0-37-generic N/A linux-backports-modules-3.13.0-37-generic N/A linux-firmware 1.127.7 RfKill: Tags: trusty Uname: Linux 3.13.0-37-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 09/15/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E1781IMS.10D dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: MS-1781 dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: REV:0.C dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrE1781IMS.10D:bd09/15/2014:svnMicro-StarInternationalCo.,Ltd.:pnGT722QE:pvrREV0.C:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1781:rvrREV0.C:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: GT72 2QE dmi.product.version: REV:0.C dmi.sys.vendor: Micro-Star International Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1383184/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1393506] Re: package firmware-b43-installer 1:019-1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 4
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: b43-fwcutter (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to b43-fwcutter in Ubuntu. https://bugs.launchpad.net/bugs/1393506 Title: package firmware-b43-installer 1:019-1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 4 Status in b43-fwcutter package in Ubuntu: Confirmed Bug description: Prompted this. ProblemType: Package DistroRelease: Ubuntu 14.10 Package: firmware-b43-installer 1:019-1 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 Date: Fri Nov 14 14:18:57 2014 DuplicateSignature: package:firmware-b43-installer:1:019-1:subprocess installed post-installation script returned error exit status 4 ErrorMessage: subprocess installed post-installation script returned error exit status 4 InstallationDate: Installed on 2014-02-22 (268 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64+mac (20140221) PackageArchitecture: all SourcePackage: b43-fwcutter Title: package firmware-b43-installer 1:019-1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 4 UpgradeStatus: Upgraded to utopic on 2014-11-14 (2 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/b43-fwcutter/+bug/1393506/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1398533] Re: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10
Okay, a little embarassing, but I went back to my original kernel (3.16.0-25) and I realized I could not reproduce the touchpad problems I had had before. Admittedly double-tap is a little bit finicky and I probably assumed it was broken but I think the actual problem is just that the allowed delay between clicks is really short (is there a way to increase that?). It is just as short in later kernels too, however. Basically this means nothing has changed aside from my testing methodology for touchpads. Human error on my part, mea culpa. Since there is no change in features between kernels, the commit bisect would seem to be unnecessary now. Clickpad hardware buttons are still malfunctioning, though. ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1398533 Title: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10 Status in linux package in Ubuntu: Confirmed Bug description: Edit: This bug is a possible duplicate of bug #1394869 So far, from what I can gather, the clickpad functions normally when using the touchpad portion to maneuver the onscreen pointer. However, the act of using one of the hardware click buttons causes it to malfunction. To test, I ran: xinput --test 11 and the output given shows a rapid stream of positioning data prior to the click, then no data after the click, however the mouse pointer appears to continue to move. However attempting to click on anything with the pointer after the first click of the clickpad registers as a click in the same location with either the clickpad or an external mouse until the clickpad is disabled with: xinput set-prop 11 Device Enabled 0 which of course causes the clickpad to cease function, however the USB mouse then continues to work normally. If you would like for me to perform any other tests, please let me know what I can try. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: amordea1737 F lxpanel CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: LXDE Date: Tue Dec 2 15:13:05 2014 HibernationDevice: RESUME=UUID=9d5cbd54-017f-45dc-a33f-f15e7196661a InstallationDate: Installed on 2014-12-02 (0 days ago) InstallationMedia: Lubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: Hewlett-Packard HP Stream Notebook PC 11 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=40a60a52-d575-4dd8-9425-7c22dbee89bd ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/25/2014 dmi.bios.vendor: Insyde dmi.bios.version: F.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8023 dmi.board.vendor: Hewlett-Packard dmi.board.version: 54.0D dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.02:bd09/25/2014:svnHewlett-Packard:pnHPStreamNotebookPC11:pvrType1-ProductConfigId:rvnHewlett-Packard:rn8023:rvr54.0D:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Stream Notebook PC 11 dmi.product.version: Type1 - ProductConfigId dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398533/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1293134] Re: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open
** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1293134 Title: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open Status in linux package in Ubuntu: Confirmed Bug description: Hi, in Windows closing the lid makes it going to sleep and opening the lid makes it resuming. I am using Ubuntu 13.10 on my Samsung Series 7 Chronos 700Z3A-S02DE. When I close the lid the laptop suspends, but on lid open it does not resume until I press the power button. With acpi_listen I see that it fires and recognizes the events for lid close and open and /proc/acpi/button/lid/LID0/state shows the correct state for each lid position. With acpid -d -f -l I see that those events trigger /etc/acpi/events/. I wrote an event that matches lid close/open and calls pm-suspend. But this does not make the laptop resume. I also uncommented the lines in /etc/systemd/logind.conf regarding hibernate and suspend. But this does not work either. So my problem is that the system receivs and understand those ACPI events triggered from the lid actions. But LID0 is not configured as /etc/acpi/wakeup device. Nor echoing it into the file does make it appearing there. So I am at the end of my knowledge and understanding of the ACPI event handling. I've already tried to pass different acpi_osi Strings with grub but the ACPI table does not change nor make it any difference for the suspend/resume problem. If I can give any further information please just ask me to. Thank you. --- ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2013-12-02 (104 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MarkForUpload: True NonfreeKernelModules: wl Package: pm-utils 1.4.1-12ubuntu1 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.11.0-18.32-generic 3.11.10.4 Tags: saucy Uname: Linux 3.11.0-18-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lars 4065 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=63d413ce-f76a-4aef-8728-6b94c8328c5a InstallationDate: Installed on 2014-11-19 (16 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: SAMSUNG ELECTRONICS CO., LTD. 700Z3A/700Z4A/700Z5A/700Z5B NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-25-generic root=UUID=44843d26-d39a-43f4-bfd7-bb8b6bb69a91 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-25-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/06/2012 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: 15FD dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvr15FD:bd11/06/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pn700Z3A/700Z4A/700Z5A/700Z5B:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rn700Z3A/700Z4A/700Z5A/700Z5B:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1293134/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1400127] [NEW] Mellanox updates for trsuty
Public bug reported: The following changes since commit b87885d70c29324b66ee7d4f979a9f95cc46564b: UBUNTU: Ubuntu-3.13.0-42.71 (2014-12-05 14:35:11 +) are attached to this tracker as patch files. The main goal for this is patch-set is to add functionality to: 1. reduce cache misses by aligning CQE/EQE writes to the actual cache line size 2. set/get link speed using ethtool [-s]. 3. set rx/tx vlan offload 4. bug fixes all of the patches are upsream (net-next), except for the last one which is a bug fix waiting for review: https://patchwork.ozlabs.org/patch/418451/ Ido Shamay (3): net/mlx4_core: Enable CQE/EQE stride support net/mlx4_core: Cache line EQE size support net/mlx4_en: Add mlx4_en_get_cqe helper Saeed Mahameed (12): net/mlx4_core: Introduce mlx4_get_module_info for cable module info reading ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support net/mlx4_core: Introduce ACCESS_REG CMD and eth_prot_ctrl dev cap net/mlx4_core: Add ethernet backplane autoneg device capability ethtool, net/mlx4_en: Add 100M, 20G, 56G speeds ethtool reporting support net/mlx4_en: Use PTYS register to query ethtool settings net/mlx4_en: Use PTYS register to set ethtool settings (Speed) net/mlx4_en: Add support for setting rxvlan offload OFF/ON net/mlx4_en: Add ethtool support for [rx|tx]vlan offload set to OFF/ON net/mlx4_core: Prevent VF from changing port configuration net/mlx4_en: mlx4_en_set_settings() always fails when autoneg is set net/mlx4_en: ethtool force speed when asking for autoneg=off ** Affects: linux (Ubuntu) Importance: Undecided Status: Incomplete ** Attachment added: tar-gz-ed patchset https://bugs.launchpad.net/bugs/1400127/+attachment/4275726/+files/ethtool-set-link-etc.tar.gz -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400127 Title: Mellanox updates for trsuty Status in linux package in Ubuntu: Incomplete Bug description: The following changes since commit b87885d70c29324b66ee7d4f979a9f95cc46564b: UBUNTU: Ubuntu-3.13.0-42.71 (2014-12-05 14:35:11 +) are attached to this tracker as patch files. The main goal for this is patch-set is to add functionality to: 1. reduce cache misses by aligning CQE/EQE writes to the actual cache line size 2. set/get link speed using ethtool [-s]. 3. set rx/tx vlan offload 4. bug fixes all of the patches are upsream (net-next), except for the last one which is a bug fix waiting for review: https://patchwork.ozlabs.org/patch/418451/ Ido Shamay (3): net/mlx4_core: Enable CQE/EQE stride support net/mlx4_core: Cache line EQE size support net/mlx4_en: Add mlx4_en_get_cqe helper Saeed Mahameed (12): net/mlx4_core: Introduce mlx4_get_module_info for cable module info reading ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support net/mlx4_core: Introduce ACCESS_REG CMD and eth_prot_ctrl dev cap net/mlx4_core: Add ethernet backplane autoneg device capability ethtool, net/mlx4_en: Add 100M, 20G, 56G speeds ethtool reporting support net/mlx4_en: Use PTYS register to query ethtool settings net/mlx4_en: Use PTYS register to set ethtool settings (Speed) net/mlx4_en: Add support for setting rxvlan offload OFF/ON net/mlx4_en: Add ethtool support for [rx|tx]vlan offload set to OFF/ON net/mlx4_core: Prevent VF from changing port configuration net/mlx4_en: mlx4_en_set_settings() always fails when autoneg is set net/mlx4_en: ethtool force speed when asking for autoneg=off To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400127/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1400127] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. From a terminal window please run: apport-collect 1400127 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400127 Title: Mellanox updates for trsuty Status in linux package in Ubuntu: Incomplete Bug description: The following changes since commit b87885d70c29324b66ee7d4f979a9f95cc46564b: UBUNTU: Ubuntu-3.13.0-42.71 (2014-12-05 14:35:11 +) are attached to this tracker as patch files. The main goal for this is patch-set is to add functionality to: 1. reduce cache misses by aligning CQE/EQE writes to the actual cache line size 2. set/get link speed using ethtool [-s]. 3. set rx/tx vlan offload 4. bug fixes all of the patches are upsream (net-next), except for the last one which is a bug fix waiting for review: https://patchwork.ozlabs.org/patch/418451/ Ido Shamay (3): net/mlx4_core: Enable CQE/EQE stride support net/mlx4_core: Cache line EQE size support net/mlx4_en: Add mlx4_en_get_cqe helper Saeed Mahameed (12): net/mlx4_core: Introduce mlx4_get_module_info for cable module info reading ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support net/mlx4_core: Introduce ACCESS_REG CMD and eth_prot_ctrl dev cap net/mlx4_core: Add ethernet backplane autoneg device capability ethtool, net/mlx4_en: Add 100M, 20G, 56G speeds ethtool reporting support net/mlx4_en: Use PTYS register to query ethtool settings net/mlx4_en: Use PTYS register to set ethtool settings (Speed) net/mlx4_en: Add support for setting rxvlan offload OFF/ON net/mlx4_en: Add ethtool support for [rx|tx]vlan offload set to OFF/ON net/mlx4_core: Prevent VF from changing port configuration net/mlx4_en: mlx4_en_set_settings() always fails when autoneg is set net/mlx4_en: ethtool force speed when asking for autoneg=off To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400127/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1317244] Re: Yamaha Steinberg UR22 not supported (Yamaha USB chipset 0499:1509)
** Changed in: linux Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1317244 Title: Yamaha Steinberg UR22 not supported (Yamaha USB chipset 0499:1509) Status in The Linux Kernel: Fix Released Status in linux package in Ubuntu: In Progress Bug description: Hello, my external USB Sound Interface is not supported from the generic kernel. I know the Chip is very similar to the Focusrite Scarlett 2i2 which works very fine. Defining the USB Device in the quirks-table as generic audio device fixed this. Is it possible to add this lines in the next patch somewhere in sound/usb/quirks-table.h? When there is a kernel update, I have to add it and compile it everytime on my own to get this device woking. { USB_DEVICE(0x0499, 0x1509), .driver_info = (unsigned long) (const struct snd_usb_audio_quirk) { /* .vendor_name = Yamaha, */ /* .product_name = Steinberg UR22, */ .ifnum = QUIRK_ANY_INTERFACE, .type = QUIRK_COMPOSITE, .data = (const struct snd_usb_audio_quirk[]) { { .ifnum = 1, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = 2, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = 3, .type = QUIRK_MIDI_YAMAHA }, { .ifnum = 4, .type = QUIRK_IGNORE_INTERFACE }, { .ifnum = -1 } } } }, Thanks and best regards, Dennis P.S. Here are some additional device informations: $ lsusb -v -d 0499:1509 Bus 001 Device 002: ID 0499:1509 Yamaha Corp. Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 255 bMaxPacketSize064 idVendor 0x0499 Yamaha Corp. idProduct 0x1509 bcdDevice1.00 iManufacturer 1 Yamaha Corporation iProduct2 Steinberg UR22 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 442 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 0a 24 01 00 01 34 00 02 01 02 ** UNRECOGNIZED: 0c 24 02 01 01 01 00 02 03 00 00 00 ** UNRECOGNIZED: 09 24 03 02 01 03 00 01 00 ** UNRECOGNIZED: 0c 24 02 03 03 06 00 02 03 00 00 00 ** UNRECOGNIZED: 09 24 03 04 01 01 00 03 00 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 07 24 01 01 01 01 00 ** UNRECOGNIZED: 0e 24 02 01 02 03 18 02 44 ac 00 80 bb 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x07 EP 7 OUT bmAttributes5 Transfer TypeIsochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x002a 1x 42 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber1 bAlternateSetting 2 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 0 iInterface
[Kernel-packages] [Bug 1400127] Re: Mellanox updates for trsuty
This item is opened for tracking purposes, and more resembles a feature request than a bug in its nature. Therefore I'm skipping the apport-collect script. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400127 Title: Mellanox updates for trsuty Status in linux package in Ubuntu: Incomplete Bug description: The following changes since commit b87885d70c29324b66ee7d4f979a9f95cc46564b: UBUNTU: Ubuntu-3.13.0-42.71 (2014-12-05 14:35:11 +) are attached to this tracker as patch files. The main goal for this is patch-set is to add functionality to: 1. reduce cache misses by aligning CQE/EQE writes to the actual cache line size 2. set/get link speed using ethtool [-s]. 3. set rx/tx vlan offload 4. bug fixes all of the patches are upsream (net-next), except for the last one which is a bug fix waiting for review: https://patchwork.ozlabs.org/patch/418451/ Ido Shamay (3): net/mlx4_core: Enable CQE/EQE stride support net/mlx4_core: Cache line EQE size support net/mlx4_en: Add mlx4_en_get_cqe helper Saeed Mahameed (12): net/mlx4_core: Introduce mlx4_get_module_info for cable module info reading ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support net/mlx4_core: Introduce ACCESS_REG CMD and eth_prot_ctrl dev cap net/mlx4_core: Add ethernet backplane autoneg device capability ethtool, net/mlx4_en: Add 100M, 20G, 56G speeds ethtool reporting support net/mlx4_en: Use PTYS register to query ethtool settings net/mlx4_en: Use PTYS register to set ethtool settings (Speed) net/mlx4_en: Add support for setting rxvlan offload OFF/ON net/mlx4_en: Add ethtool support for [rx|tx]vlan offload set to OFF/ON net/mlx4_core: Prevent VF from changing port configuration net/mlx4_en: mlx4_en_set_settings() always fails when autoneg is set net/mlx4_en: ethtool force speed when asking for autoneg=off To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400127/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1362584] Re: [HP 255 G1 Notebook PC] Synaptics Touchpad not Working after upgrade from 12.04.1 LTS to 14.04.1 LTS
Paul Stephenson, if you do a clean install of Trusty, does the touchpad then work? ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1362584 Title: [HP 255 G1 Notebook PC] Synaptics Touchpad not Working after upgrade from 12.04.1 LTS to 14.04.1 LTS Status in linux package in Ubuntu: Incomplete Bug description: Have only just bought this laptop. WORKAROUND: Touchpad worked fine in non UEFI mode. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-34-generic 3.13.0-34.60 ProcVersionSignature: Ubuntu 3.13.0-34.60-generic 3.13.11.4 Uname: Linux 3.13.0-34-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: paul 2101 F pulseaudio /dev/snd/controlC0: paul 2101 F pulseaudio CurrentDesktop: Unity Date: Thu Aug 28 12:55:56 2014 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-stella-anaheim-precise-amd64-20130424-1 HibernationDevice: RESUME=UUID=116415ec-3f46-402a-a2a4-aebd87698d48 InstallationDate: Installed on 2014-03-05 (175 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20130424-09:51 MachineType: Hewlett-Packard HP 255 G1 Notebook PC ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-34-generic root=UUID=f42726b4-109b-4962-ae3b-009bfb6543b0 ro i915.modeset=1 quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-34-generic N/A linux-backports-modules-3.13.0-34-generic N/A linux-firmware 1.127.5 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-08-16 (11 days ago) dmi.bios.date: 06/26/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.37 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 188B dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 69.18 dmi.chassis.asset.tag: 5CG410D2QY dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.37:bd06/26/2013:svnHewlett-Packard:pnHP255G1NotebookPC:pvr088E1300591600010:rvnHewlett-Packard:rn188B:rvrKBCVersion69.18:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP 255 G1 Notebook PC dmi.product.version: 088E1300591600010 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1362584/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1293134] Re: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open
Lars Schütze, could you please provide the missing information following https://wiki.ubuntu.com/DebuggingKernelSuspend ? ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1293134 Title: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open Status in linux package in Ubuntu: Incomplete Bug description: Hi, in Windows closing the lid makes it going to sleep and opening the lid makes it resuming. I am using Ubuntu 13.10 on my Samsung Series 7 Chronos 700Z3A-S02DE. When I close the lid the laptop suspends, but on lid open it does not resume until I press the power button. With acpi_listen I see that it fires and recognizes the events for lid close and open and /proc/acpi/button/lid/LID0/state shows the correct state for each lid position. With acpid -d -f -l I see that those events trigger /etc/acpi/events/. I wrote an event that matches lid close/open and calls pm-suspend. But this does not make the laptop resume. I also uncommented the lines in /etc/systemd/logind.conf regarding hibernate and suspend. But this does not work either. So my problem is that the system receivs and understand those ACPI events triggered from the lid actions. But LID0 is not configured as /etc/acpi/wakeup device. Nor echoing it into the file does make it appearing there. So I am at the end of my knowledge and understanding of the ACPI event handling. I've already tried to pass different acpi_osi Strings with grub but the ACPI table does not change nor make it any difference for the suspend/resume problem. If I can give any further information please just ask me to. Thank you. --- ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2013-12-02 (104 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MarkForUpload: True NonfreeKernelModules: wl Package: pm-utils 1.4.1-12ubuntu1 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.11.0-18.32-generic 3.11.10.4 Tags: saucy Uname: Linux 3.11.0-18-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lars 4065 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=63d413ce-f76a-4aef-8728-6b94c8328c5a InstallationDate: Installed on 2014-11-19 (16 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: SAMSUNG ELECTRONICS CO., LTD. 700Z3A/700Z4A/700Z5A/700Z5B NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-25-generic root=UUID=44843d26-d39a-43f4-bfd7-bb8b6bb69a91 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-25-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/06/2012 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: 15FD dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvr15FD:bd11/06/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pn700Z3A/700Z4A/700Z5A/700Z5B:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rn700Z3A/700Z4A/700Z5A/700Z5B:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1293134/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1313754] Re: [HP Pavilion dv6-6c80el Entertainment Notebook PC] PrintScreen button does nothing.
Arthur Hrast Essenfelder, as per your Bug Description, when you originally filed this report, you were using the kernel from Saucy in Trusty: ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Is this intentional? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1313754 Title: [HP Pavilion dv6-6c80el Entertainment Notebook PC] PrintScreen button does nothing. Status in linux package in Ubuntu: Incomplete Bug description: When pressed, PrintScreen button does nothing. WORKAROUND: I am able to take a PrintScreen when I press the key combination Fn+Del. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-generic (not installed) ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: arthurhe 2037 F pulseaudio CurrentDesktop: Unity Date: Mon Apr 28 16:20:39 2014 HibernationDevice: RESUME=UUID=2def0040-b618-4809-b4d2-8d79183bab09 InstallationDate: Installed on 2013-10-23 (187 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MachineType: Hewlett-Packard HP Pavilion dv6 Notebook PC ProcFB: 0 inteldrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-14-generic root=UUID=275c1508-c6aa-4a9a-9a02-1045f73fc0fb ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-14-generic N/A linux-backports-modules-3.11.0-14-generic N/A linux-firmware 1.127 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-19 (9 days ago) dmi.bios.date: 01/23/2013 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.1C dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 17FA dmi.board.vendor: Hewlett-Packard dmi.board.version: 10.5A dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnHewlett-Packard:bvrF.1C:bd01/23/2013:svnHewlett-Packard:pnHPPaviliondv6NotebookPC:pvr06912120461620100:rvnHewlett-Packard:rn17FA:rvr10.5A:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion dv6 Notebook PC dmi.product.version: 06912120461620100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1313754/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1388279] Re: suspend hangs when unloading module
Jürgen, as per http://us.acer.com/ac/en/US/content/drivers an update to your BIOS is available (1.08). If you update to this following https://help.ubuntu.com/community/BIOSUpdate does it change anything? If it doesn't, could you please both specify what happened, and provide the output of the following terminal command: sudo dmidecode -s bios-version sudo dmidecode -s bios-release-date For more on BIOS updates and linux, please see https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette . Please note your current BIOS is already in the Bug Description, so posting this on the old BIOS would not be helpful. As well, you don't have to create a new bug report. Once the BIOS is updated, then please mark this report Status Confirmed. Thank you for your understanding. ** Tags added: bios-outdated-1.08 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1388279 Title: suspend hangs when unloading module Status in linux package in Ubuntu: Incomplete Bug description: a few user report problems after upgrading to 14.10. After resume or supend the touchpad is dead. un-reloading hid_multitouch solves the issue. however putting the module name into 00sleep_modules prevents sleep mode (computer hangs) (making a typing error like hid_modu and it works again) Unfortunately I have no clue how to get more detailed information ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: KDE Date: Fri Oct 31 23:32:13 2014 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jott 3850 F pulseaudio /dev/snd/seq:timidity 2549 F timidity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=c79bd9d4-ded9-43e5-a7e9-d20c0306f05d Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 007: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire E3-112 Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=d1602f47-e8a7-4a27-8243-cdf4e5101413 ro quiet splash acpi_osi=Linux vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-24-generic N/A linux-backports-modules-3.16.0-24-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: WifiSyslog: _MarkForUpload: True dmi.bios.date: 07/22/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.03 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: R2 dmi.board.vendor: Acer dmi.board.version: Type2 - A01 Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.03:bd07/22/2014:svnAcer:pnAspireE3-112:pvrV1.03:rvnAcer:rnR2:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: Aspire E3-112 dmi.product.version: V1.03 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1388279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1293134] Re: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open
** Tags added: needs-bios-check -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1293134 Title: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open Status in linux package in Ubuntu: Incomplete Bug description: Hi, in Windows closing the lid makes it going to sleep and opening the lid makes it resuming. I am using Ubuntu 13.10 on my Samsung Series 7 Chronos 700Z3A-S02DE. When I close the lid the laptop suspends, but on lid open it does not resume until I press the power button. With acpi_listen I see that it fires and recognizes the events for lid close and open and /proc/acpi/button/lid/LID0/state shows the correct state for each lid position. With acpid -d -f -l I see that those events trigger /etc/acpi/events/. I wrote an event that matches lid close/open and calls pm-suspend. But this does not make the laptop resume. I also uncommented the lines in /etc/systemd/logind.conf regarding hibernate and suspend. But this does not work either. So my problem is that the system receivs and understand those ACPI events triggered from the lid actions. But LID0 is not configured as /etc/acpi/wakeup device. Nor echoing it into the file does make it appearing there. So I am at the end of my knowledge and understanding of the ACPI event handling. I've already tried to pass different acpi_osi Strings with grub but the ACPI table does not change nor make it any difference for the suspend/resume problem. If I can give any further information please just ask me to. Thank you. --- ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2013-12-02 (104 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MarkForUpload: True NonfreeKernelModules: wl Package: pm-utils 1.4.1-12ubuntu1 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.11.0-18.32-generic 3.11.10.4 Tags: saucy Uname: Linux 3.11.0-18-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lars 4065 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=63d413ce-f76a-4aef-8728-6b94c8328c5a InstallationDate: Installed on 2014-11-19 (16 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: SAMSUNG ELECTRONICS CO., LTD. 700Z3A/700Z4A/700Z5A/700Z5B NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-25-generic root=UUID=44843d26-d39a-43f4-bfd7-bb8b6bb69a91 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-25-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/06/2012 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: 15FD dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvr15FD:bd11/06/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pn700Z3A/700Z4A/700Z5A/700Z5B:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rn700Z3A/700Z4A/700Z5A/700Z5B:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1293134/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1245226] Re: HDMI: audio-video playback too fast
Geoffrey J Rusell, thank you for your comment. As this report is closed, is not scoped to you, your hardware, or your problem. So your hardware and problem may be tracked, could you please file a new report with Ubuntu by executing the following in a terminal while booted into the default Ubuntu kernel (not a mainline one) via: ubuntu-bug linux For more on this, please read the official Ubuntu documentation: Ubuntu Bug Control and Ubuntu Bug Squad: https://wiki.ubuntu.com/Bugs/BestPractices#X.2BAC8-Reporting.Focus_on_One_Issue Ubuntu Kernel Team: https://wiki.ubuntu.com/KernelTeam/KernelTeamBugPolicies#Filing_Kernel_Bug_reports https://wiki.ubuntu.com/Kernel/Policies/DuplicateBugs Ubuntu Community: https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette When opening up the new report, please feel free to subscribe me to it. As well, please do not announce in this report you created a new bug report. Thank you for your understanding. Helpful bug reporting tips: https://wiki.ubuntu.com/ReportingBugs -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1245226 Title: HDMI: audio-video playback too fast Status in linux package in Ubuntu: Invalid Bug description: After upgrading to Ubuntu 13.10, selecting HDMI as audio output device is broken. Audio is played back at high speed. When playing back video clips, the video frames are also too fast. Note that, when selecting headphone as audio output device, everything works. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: gnome-control-center 1:3.6.3-0ubuntu44 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 Date: Sun Oct 27 18:00:53 2013 ExecutablePath: /usr/bin/gnome-control-center InstallationDate: Installed on 2010-11-07 (1085 days ago) InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release amd64 (20101007) MarkForUpload: True SourcePackage: gnome-control-center UpgradeStatus: Upgraded to saucy on 2013-10-22 (5 days ago) usr_lib_gnome-control-center: activity-log-manager 0.9.7-0ubuntu4 deja-dup 27.3.1-0ubuntu1 gnome-control-center-datetime 13.10.0+13.10.20131016.2-0ubuntu1 gnome-control-center-signon 0.1.7~+13.10.20130724.1-0ubuntu1 gnome-control-center-unity1.3+13.10.20131004-0ubuntu1 --- ApportVersion: 2.12.6-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2831 F pulseaudio /dev/snd/controlC0: ubuntu 2831 F pulseaudio /dev/snd/pcmC0D0c: ubuntu 2831 F...m pulseaudio CasperVersion: 1.336ubuntu1 CurrentDmesg: [ 60.513505] systemd-hostnamed[5239]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 63.157819] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) DistroRelease: Ubuntu 14.04 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20131103) MachineType: MSI MS-7623 MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.12.0-1.3-generic 3.12.0-rc7 RelatedPackageVersions: linux-restricted-modules-3.12.0-1-generic N/A linux-backports-modules-3.12.0-1-generic N/A linux-firmware1.117 RfKill: Tags: trusty Uname: Linux 3.12.0-1-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/10/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V11.5 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: 880GM-E41 (MS-7623) dmi.board.vendor: MSI dmi.board.version: 2.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 2.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV11.5:bd08/10/2010:svnMSI:pnMS-7623:pvr2.0:rvnMSI:rn880GM-E41(MS-7623):rvr2.0:cvnMSI:ct3:cvr2.0: dmi.product.name: MS-7623 dmi.product.version: 2.0 dmi.sys.vendor: MSI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1245226/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1213123] Re: 045e:009c [H87I-PLUS] Microsoft Keyboard Elite for Bluetooth dead keys problem
Maeda, to see if this is resolved in a later release, could you please test for this via http://cdimage.ubuntu.com/daily-live/current/ and advise to the results? ** Changed in: bluez (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1213123 Title: 045e:009c [H87I-PLUS] Microsoft Keyboard Elite for Bluetooth dead keys problem Status in bluez package in Ubuntu: Incomplete Bug description: In Precise with 4.60 version of bluez I can pair my keyboard and mouse perfectly, but not with the 4.98 that is in Precise by default. === The problem is that dead keys of my keyboard (I mean -L or R- CTRL, ALT, SUPER, -L or R- SHIFT, ALT-GR) doesn't work with my current motherboard (whether application I opened, console included). It does work correctly with other motherboards. The new motherboard is an 1150 Haswell one from Asus. What I can say is : 1/ When booting, my BIOS recognize perfectly the dead keys of my keyboard, meaning that the bluetooth dongle or the motherboard is not directly concerned. 2/ When doing a second installation of Ubuntu, same problem. 3/ When trying the option 'keyboard layout' (whatever layout I choose), I don't see those dead keys flashing, meaning the system doesn't react at all when pressing them. 4/ By chance, I found another keyboard (same model, same brand), same problem, meaning the keyboard is not concerned (it works on the older motherboard, then it was poor chance that the keyboard broked just before reinstalling). 5/ Tried the setxkbmap command (with sudo or without), nothing's better 6/ Tried the xmodmap command, I see the 0x codes for Left SHIFT, all dead keys are there (see attachment) 7/ Normal keyboard (no wireless) works perfectly 8/ Put the dongle on an other usb slot doesn't change anything 9/ Command xev doesn't makes changes when pressing dead keys. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.5.0-37-generic 3.5.0-37.58~precise1 ProcVersionSignature: Ubuntu 3.5.0-37.58~precise1-generic 3.5.7.16 Uname: Linux 3.5.0-37-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.25. ApportVersion: 2.0.1-0ubuntu17.4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lolo 2272 F pulseaudio /dev/snd/controlC0: lolo 2272 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. Card0.Amixer.info: Card hw:0 'MID'/'HDA Intel MID at 0xf0434000 irq 45' Mixer name : 'Intel Haswell HDMI' Components : 'HDA:80862807,80860101,0010' Controls : 6 Simple ctrls : 1 Card0.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Card1.Amixer.info: Card hw:1 'PCH'/'HDA Intel PCH at 0xf043 irq 46' Mixer name : 'Realtek ALC887-VD' Components : 'HDA:10ec0887,10438576,00100302' Controls : 41 Simple ctrls : 20 Date: Fri Aug 16 16:34:35 2013 HibernationDevice: RESUME=UUID=942aa693-ca21-4f2a-966c-97b0fa9ea5ae IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: ASUS All Series MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-37-generic root=UUID=9509f53e-1de4-4f9c-90dd-6c1ef7ded3a9 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.5.0-37-generic N/A linux-backports-modules-3.5.0-37-generic N/A linux-firmware1.79.6 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/15/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0306 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H87I-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0306:bd04/15/2013:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH87I-PLUS:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 CasperVersion: 1.336ubuntu1 DistroRelease: Ubuntu 13.10 InterestingModules: btusb bnep rfcomm bluetooth LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: ASUS
[Kernel-packages] [Bug 1398533] Re: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10
Amordea Whiteoak, just to inquire, does executing the following via a terminal help to address your problem: synclient RTCornerButton=0 synclient RBCornerButton=0 synclient LTCornerButton=0 synclient LBCornerButton=0 synclient AreaBottomEdge=3900 ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1398533 Title: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10 Status in linux package in Ubuntu: Incomplete Bug description: Edit: This bug is a possible duplicate of bug #1394869 So far, from what I can gather, the clickpad functions normally when using the touchpad portion to maneuver the onscreen pointer. However, the act of using one of the hardware click buttons causes it to malfunction. To test, I ran: xinput --test 11 and the output given shows a rapid stream of positioning data prior to the click, then no data after the click, however the mouse pointer appears to continue to move. However attempting to click on anything with the pointer after the first click of the clickpad registers as a click in the same location with either the clickpad or an external mouse until the clickpad is disabled with: xinput set-prop 11 Device Enabled 0 which of course causes the clickpad to cease function, however the USB mouse then continues to work normally. If you would like for me to perform any other tests, please let me know what I can try. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: amordea1737 F lxpanel CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: LXDE Date: Tue Dec 2 15:13:05 2014 HibernationDevice: RESUME=UUID=9d5cbd54-017f-45dc-a33f-f15e7196661a InstallationDate: Installed on 2014-12-02 (0 days ago) InstallationMedia: Lubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: Hewlett-Packard HP Stream Notebook PC 11 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=40a60a52-d575-4dd8-9425-7c22dbee89bd ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/25/2014 dmi.bios.vendor: Insyde dmi.bios.version: F.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8023 dmi.board.vendor: Hewlett-Packard dmi.board.version: 54.0D dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.02:bd09/25/2014:svnHewlett-Packard:pnHPStreamNotebookPC11:pvrType1-ProductConfigId:rvnHewlett-Packard:rn8023:rvr54.0D:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Stream Notebook PC 11 dmi.product.version: Type1 - ProductConfigId dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398533/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1400044] Re: Acer E1-572 bluetooth not working on 14.04 kernel 3.13
PvZ, thank you for reporting this and helping make Ubuntu better. As per http://us.acer.com/ac/en/US/content/drivers an update to your BIOS is available (2.17). If you update to this following https://help.ubuntu.com/community/BIOSUpdate does it change anything? If it doesn't, could you please both specify what happened, and provide the output of the following terminal command: sudo dmidecode -s bios-version sudo dmidecode -s bios-release-date For more on BIOS updates and linux, please see https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette . Please note your current BIOS is already in the Bug Description, so posting this on the old BIOS would not be helpful. As well, you don't have to create a new bug report. Once the BIOS is updated, then please mark this report Status Confirmed. Thank you for your understanding. ** Description changed: On 14.04 with kernel 3.13 my bluetooth does not work. - A lot of bug report reading I think my problem is similar to https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1237296 - But every time someones asks a question they are asked to fill in a new bur report. - Hope to get some good info about this problem and simple steps to solve this problem. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-40-generic 3.13.0-40.69 ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10 Uname: Linux 3.13.0-40-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 AudioDevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC1: zuijle 2628 F pulseaudio - /dev/snd/pcmC1D0p: zuijle 2628 F...m pulseaudio - /dev/snd/controlC0: zuijle 2628 F pulseaudio + USERPID ACCESS COMMAND + /dev/snd/controlC1: zuijle 2628 F pulseaudio + /dev/snd/pcmC1D0p: zuijle 2628 F...m pulseaudio + /dev/snd/controlC0: zuijle 2628 F pulseaudio CurrentDesktop: Unity Date: Sun Dec 7 10:16:15 2014 HibernationDevice: RESUME=UUID=3191ba14-d48e-42a4-a86f-7cb2ebae5569 InstallationDate: Installed on 2014-07-18 (141 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Acer Aspire E1-572 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=eea14111-5ac6-4bae-86a1-d7c8185b8dc6 ro quiet splash acpi_osi=Linux acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: - linux-restricted-modules-3.13.0-40-generic N/A - linux-backports-modules-3.13.0-40-generic N/A - linux-firmware 1.127.10 + linux-restricted-modules-3.13.0-40-generic N/A + linux-backports-modules-3.13.0-40-generic N/A + linux-firmware 1.127.10 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: - + dmi.bios.date: 11/21/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.13 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.13:bd11/21/2013:svnAcer:pnAspireE1-572:pvrV2.13:rvnAcer:rnEA50_HW:rvrV2.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.13 dmi.sys.vendor: Acer ** Tags added: bios-outdated-2.17 ** Changed in: linux (Ubuntu) Importance: Undecided = Low ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400044 Title: Acer E1-572 bluetooth not working on 14.04 kernel 3.13 Status in linux package in Ubuntu: Incomplete Bug description: On 14.04 with kernel 3.13 my bluetooth does not work. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-40-generic 3.13.0-40.69 ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10 Uname: Linux 3.13.0-40-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: zuijle 2628 F pulseaudio /dev/snd/pcmC1D0p: zuijle 2628 F...m pulseaudio /dev/snd/controlC0: zuijle 2628 F pulseaudio CurrentDesktop: Unity Date: Sun Dec 7 10:16:15 2014 HibernationDevice: RESUME=UUID=3191ba14-d48e-42a4-a86f-7cb2ebae5569 InstallationDate: Installed on 2014-07-18 (141 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Acer Aspire E1-572 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=eea14111-5ac6-4bae-86a1-d7c8185b8dc6 ro quiet splash acpi_osi=Linux acpi_backlight=vendor vt.handoff=7
[Kernel-packages] [Bug 1398533] Re: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10
Okay, I have tested the touchpad after entering those commands, tested through two boots of the 3.16.0-25 kernel. My findings show that when I first enter those commands after boot, the clickpad hardware clicks still cause the clickpad to malfunction. However after an xinput enable/disable cycle with these settings changes, the hardware clickpad buttons then no longer function at all but also no longer cause all mouse input to lock up when depressed. ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1398533 Title: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10 Status in linux package in Ubuntu: Confirmed Bug description: Edit: This bug is a possible duplicate of bug #1394869 So far, from what I can gather, the clickpad functions normally when using the touchpad portion to maneuver the onscreen pointer. However, the act of using one of the hardware click buttons causes it to malfunction. To test, I ran: xinput --test 11 and the output given shows a rapid stream of positioning data prior to the click, then no data after the click, however the mouse pointer appears to continue to move. However attempting to click on anything with the pointer after the first click of the clickpad registers as a click in the same location with either the clickpad or an external mouse until the clickpad is disabled with: xinput set-prop 11 Device Enabled 0 which of course causes the clickpad to cease function, however the USB mouse then continues to work normally. If you would like for me to perform any other tests, please let me know what I can try. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: amordea1737 F lxpanel CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: LXDE Date: Tue Dec 2 15:13:05 2014 HibernationDevice: RESUME=UUID=9d5cbd54-017f-45dc-a33f-f15e7196661a InstallationDate: Installed on 2014-12-02 (0 days ago) InstallationMedia: Lubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: Hewlett-Packard HP Stream Notebook PC 11 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=40a60a52-d575-4dd8-9425-7c22dbee89bd ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/25/2014 dmi.bios.vendor: Insyde dmi.bios.version: F.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8023 dmi.board.vendor: Hewlett-Packard dmi.board.version: 54.0D dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.02:bd09/25/2014:svnHewlett-Packard:pnHPStreamNotebookPC11:pvrType1-ProductConfigId:rvnHewlett-Packard:rn8023:rvr54.0D:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Stream Notebook PC 11 dmi.product.version: Type1 - ProductConfigId dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398533/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1293134] Re: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open
Okay, I followed the procedure. I was closing the laptop lid to enter resume. Upon open it does not resume but when I press power button it resumed without a problem. I've installed the latest BIOS available for this laptop. Wakeup file and dmesg.txt are attached to the bug. I've taken a look into the dmesg file and I dont see anything special. There is a line [ 368.486314] r8169 :03:00.0: System wakeup enabled by ACPI which corresponds to ~$ lspci | grep 03:00.0 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1293134 Title: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open Status in linux package in Ubuntu: Incomplete Bug description: Hi, in Windows closing the lid makes it going to sleep and opening the lid makes it resuming. I am using Ubuntu 13.10 on my Samsung Series 7 Chronos 700Z3A-S02DE. When I close the lid the laptop suspends, but on lid open it does not resume until I press the power button. With acpi_listen I see that it fires and recognizes the events for lid close and open and /proc/acpi/button/lid/LID0/state shows the correct state for each lid position. With acpid -d -f -l I see that those events trigger /etc/acpi/events/. I wrote an event that matches lid close/open and calls pm-suspend. But this does not make the laptop resume. I also uncommented the lines in /etc/systemd/logind.conf regarding hibernate and suspend. But this does not work either. So my problem is that the system receivs and understand those ACPI events triggered from the lid actions. But LID0 is not configured as /etc/acpi/wakeup device. Nor echoing it into the file does make it appearing there. So I am at the end of my knowledge and understanding of the ACPI event handling. I've already tried to pass different acpi_osi Strings with grub but the ACPI table does not change nor make it any difference for the suspend/resume problem. If I can give any further information please just ask me to. Thank you. --- ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2013-12-02 (104 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MarkForUpload: True NonfreeKernelModules: wl Package: pm-utils 1.4.1-12ubuntu1 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.11.0-18.32-generic 3.11.10.4 Tags: saucy Uname: Linux 3.11.0-18-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lars 4065 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=63d413ce-f76a-4aef-8728-6b94c8328c5a InstallationDate: Installed on 2014-11-19 (16 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: SAMSUNG ELECTRONICS CO., LTD. 700Z3A/700Z4A/700Z5A/700Z5B NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-25-generic root=UUID=44843d26-d39a-43f4-bfd7-bb8b6bb69a91 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-25-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/06/2012 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: 15FD dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvr15FD:bd11/06/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pn700Z3A/700Z4A/700Z5A/700Z5B:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rn700Z3A/700Z4A/700Z5A/700Z5B:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1293134/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to :
[Kernel-packages] [Bug 1293134] Re: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open
** Attachment added: dmesg.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1293134/+attachment/4275755/+files/dmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1293134 Title: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open Status in linux package in Ubuntu: Incomplete Bug description: Hi, in Windows closing the lid makes it going to sleep and opening the lid makes it resuming. I am using Ubuntu 13.10 on my Samsung Series 7 Chronos 700Z3A-S02DE. When I close the lid the laptop suspends, but on lid open it does not resume until I press the power button. With acpi_listen I see that it fires and recognizes the events for lid close and open and /proc/acpi/button/lid/LID0/state shows the correct state for each lid position. With acpid -d -f -l I see that those events trigger /etc/acpi/events/. I wrote an event that matches lid close/open and calls pm-suspend. But this does not make the laptop resume. I also uncommented the lines in /etc/systemd/logind.conf regarding hibernate and suspend. But this does not work either. So my problem is that the system receivs and understand those ACPI events triggered from the lid actions. But LID0 is not configured as /etc/acpi/wakeup device. Nor echoing it into the file does make it appearing there. So I am at the end of my knowledge and understanding of the ACPI event handling. I've already tried to pass different acpi_osi Strings with grub but the ACPI table does not change nor make it any difference for the suspend/resume problem. If I can give any further information please just ask me to. Thank you. --- ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2013-12-02 (104 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MarkForUpload: True NonfreeKernelModules: wl Package: pm-utils 1.4.1-12ubuntu1 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.11.0-18.32-generic 3.11.10.4 Tags: saucy Uname: Linux 3.11.0-18-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lars 4065 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=63d413ce-f76a-4aef-8728-6b94c8328c5a InstallationDate: Installed on 2014-11-19 (16 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: SAMSUNG ELECTRONICS CO., LTD. 700Z3A/700Z4A/700Z5A/700Z5B NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-25-generic root=UUID=44843d26-d39a-43f4-bfd7-bb8b6bb69a91 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-25-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/06/2012 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: 15FD dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvr15FD:bd11/06/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pn700Z3A/700Z4A/700Z5A/700Z5B:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rn700Z3A/700Z4A/700Z5A/700Z5B:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1293134/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1293134] Re: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open
** Attachment added: wakeup https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1293134/+attachment/4275756/+files/wakeup -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1293134 Title: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open Status in linux package in Ubuntu: Incomplete Bug description: Hi, in Windows closing the lid makes it going to sleep and opening the lid makes it resuming. I am using Ubuntu 13.10 on my Samsung Series 7 Chronos 700Z3A-S02DE. When I close the lid the laptop suspends, but on lid open it does not resume until I press the power button. With acpi_listen I see that it fires and recognizes the events for lid close and open and /proc/acpi/button/lid/LID0/state shows the correct state for each lid position. With acpid -d -f -l I see that those events trigger /etc/acpi/events/. I wrote an event that matches lid close/open and calls pm-suspend. But this does not make the laptop resume. I also uncommented the lines in /etc/systemd/logind.conf regarding hibernate and suspend. But this does not work either. So my problem is that the system receivs and understand those ACPI events triggered from the lid actions. But LID0 is not configured as /etc/acpi/wakeup device. Nor echoing it into the file does make it appearing there. So I am at the end of my knowledge and understanding of the ACPI event handling. I've already tried to pass different acpi_osi Strings with grub but the ACPI table does not change nor make it any difference for the suspend/resume problem. If I can give any further information please just ask me to. Thank you. --- ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2013-12-02 (104 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MarkForUpload: True NonfreeKernelModules: wl Package: pm-utils 1.4.1-12ubuntu1 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.11.0-18.32-generic 3.11.10.4 Tags: saucy Uname: Linux 3.11.0-18-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lars 4065 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=63d413ce-f76a-4aef-8728-6b94c8328c5a InstallationDate: Installed on 2014-11-19 (16 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: SAMSUNG ELECTRONICS CO., LTD. 700Z3A/700Z4A/700Z5A/700Z5B NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-25-generic root=UUID=44843d26-d39a-43f4-bfd7-bb8b6bb69a91 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-25-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/06/2012 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: 15FD dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvr15FD:bd11/06/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pn700Z3A/700Z4A/700Z5A/700Z5B:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rn700Z3A/700Z4A/700Z5A/700Z5B:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1293134/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 453885] Re: bluetooth is nonfunctional
With Trusty : same problem. Is there someone who could help us to have mouse and keyboard working without downgrading to very old package version, and that trick won't be possible in Trusty and later... Thanks. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/453885 Title: bluetooth is nonfunctional Status in Bluez Utilities: New Status in bluez package in Ubuntu: Confirmed Bug description: Binary package hint: bluez Since my upgrade to kubuntu karmic my USB dongle stopped working, but it still works in my other jaunty machine and in Windows XP. Adapter model is Broadcom BCM2035 lsusb says: Bus 003 Device 005: ID 0c10: Symptoms: 1) If i open bluetooth adapter settings in either kbluetooth, bluez-gnome or gnome-bluetooth, it says adapter is in hidden mode. If i change it to discovered, save settings, then open configuration dialog again, it still says that adapter is in hidden mode. 2) When i scan for bluetooth devices in kbluetooth, bluez-gnome, gnome-bluetooth or using command hcitool scan it cannot find any device. When i try to connect to already known device connection also fails 3)Same when i try to discover karmic machine or connect to it from my mobile or PDA. 3) Also in adapter config dialog adapter name is set to Broadcom BCM2035, whereas in jaunty it was $hostname-1 hciconfig says: hci0: Type: USB BD Address: 00:1A:7D:0A:C8:8A ACL MTU: 377:10 SCO MTU: 16:0 UP RUNNING RX bytes:664 acl:0 sco:0 events:18 errors:0 TX bytes:76 acl:0 sco:0 commands:20 errors:0 $ hcitool scan Scanning ... Inquiry failed: Connection timed out $ uname -a Linux gendalf 2.6.31-14-generic #47-Ubuntu SMP Thu Oct 15 02:08:08 UTC 2009 i686 GNU/Linux $ apt-cache policy bluez bluez: Installed: 4.51-0ubuntu2 Candidate: 4.51-0ubuntu2 Version table: *** 4.51-0ubuntu2 0 500 http://archive.ubuntu.com karmic/main Packages 100 /var/lib/dpkg/status Let me know if you need additional info from me. ProblemType: Bug Architecture: i386 Date: Sat Oct 17 13:53:20 2009 DistroRelease: Ubuntu 9.10 Package: bluez 4.51-0ubuntu2 ProcEnviron: LANGUAGE=uk_UA:uk:en_GB:en LANG=uk_UA.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-14.47-generic SourcePackage: bluez Uname: Linux 2.6.31-14-generic i686 XsessionErrors: (polkit-gnome-authentication-agent-1:2131): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed To manage notifications about this bug go to: https://bugs.launchpad.net/bluez/+bug/453885/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1398533] Re: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10
Amordea Whiteoak, just to advise, the commands will not persist through a reboot. Despite this, if you are still having a problem, could you please edit the Description to more accurately define what you are still/now experiencing? Otherwise, please mark this report Status Invalid. ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1398533 Title: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10 Status in linux package in Ubuntu: Incomplete Bug description: Edit: This bug is a possible duplicate of bug #1394869 So far, from what I can gather, the clickpad functions normally when using the touchpad portion to maneuver the onscreen pointer. However, the act of using one of the hardware click buttons causes it to malfunction. To test, I ran: xinput --test 11 and the output given shows a rapid stream of positioning data prior to the click, then no data after the click, however the mouse pointer appears to continue to move. However attempting to click on anything with the pointer after the first click of the clickpad registers as a click in the same location with either the clickpad or an external mouse until the clickpad is disabled with: xinput set-prop 11 Device Enabled 0 which of course causes the clickpad to cease function, however the USB mouse then continues to work normally. If you would like for me to perform any other tests, please let me know what I can try. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: amordea1737 F lxpanel CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: LXDE Date: Tue Dec 2 15:13:05 2014 HibernationDevice: RESUME=UUID=9d5cbd54-017f-45dc-a33f-f15e7196661a InstallationDate: Installed on 2014-12-02 (0 days ago) InstallationMedia: Lubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: Hewlett-Packard HP Stream Notebook PC 11 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=40a60a52-d575-4dd8-9425-7c22dbee89bd ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/25/2014 dmi.bios.vendor: Insyde dmi.bios.version: F.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8023 dmi.board.vendor: Hewlett-Packard dmi.board.version: 54.0D dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.02:bd09/25/2014:svnHewlett-Packard:pnHPStreamNotebookPC11:pvrType1-ProductConfigId:rvnHewlett-Packard:rn8023:rvr54.0D:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Stream Notebook PC 11 dmi.product.version: Type1 - ProductConfigId dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398533/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1203565] Re: 045e:009c [H87-PRO] Microsoft Keyboard Elite for Bluetooth dead keys problem
The main problem is for sure in the adapter BCM2035 and bluez. See here : https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/453885 Downgrading to bluez 4.60 is the only solution... Solution that won't work with the LTS Trusty. Then, I can't do upgrade to this LTS. I'm available to test commands and give you logs. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1203565 Title: 045e:009c [H87-PRO] Microsoft Keyboard Elite for Bluetooth dead keys problem Status in bluez package in Ubuntu: New Status in linux package in Ubuntu: Incomplete Bug description: In Precise with 4.60 version of bluez I can pair my keyboard and mouse perfectly. === The problem is that dead keys of my keyboard (I mean -L or R- CTRL, ALT, SUPER, -L or R- SHIFT, ALT-GR) doesn't work with my current motherboard (whether application I opened, console included). It does work correctly with other motherboards. The new motherboard is an 1150 Haswell one from Asus. What I can say is : 1/ When booting, my BIOS recognize perfectly the dead keys of my keyboard, meaning that the bluetooth dongle or the motherboard is not directly concerned. 2/ When doing a second installation of Ubuntu, same problem. 3/ When trying the option 'keyboard layout' (whatever layout I choose), I don't see those dead keys flashing, meaning the system doesn't react at all when pressing them. 4/ By chance, I found another keyboard (same model, same brand), same problem, meaning the keyboard is not concerned (it works on the older motherboard, then it was poor chance that the keyboard broked just before reinstalling). 5/ Tried the setxkbmap command (with sudo or without), nothing's better 6/ Tried the xmodmap command, I see the 0x codes for Left SHIFT, all dead keys are there (see attachment) 7/ Normal keyboard (no wireless) works perfectly 8/ Put the dongle on an other usb slot doesn't change anything 9/ Command xev doesn't makes changes when pressing dead keys. For me it's clearly a Ubuntu's system bug, with my motherboard (Asus H87-PRO socket 1150). --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.25. ApportVersion: 2.0.1-0ubuntu17.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC0D0p: syl4375 F...m rhythmbox CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. Card0.Amixer.info: Card hw:0 'PAD'/'RME Digi96/8 PAD at 0xf400, irq 19' Mixer name : '' Components : '' Controls : 10 Simple ctrls : 6 Card1.Amixer.info: Card hw:1 'NVidia'/'HDA NVidia at 0xf308 irq 17' Mixer name : 'Nvidia GPU 14 HDMI/DP' Components : 'HDA:10de0014,10de0101,00100100' Controls : 24 Simple ctrls : 4 Card2.Amixer.info: Card hw:2 'NVidia_1'/'HDA NVidia at 0xe308 irq 16' Mixer name : 'Nvidia GPU 0a HDMI/DP' Components : 'HDA:10de000a,10de0101,00100100' Controls : 24 Simple ctrls : 4 DistroRelease: Ubuntu 12.04 MachineType: ASUS All Series MarkForUpload: True NonfreeKernelModules: nvidia Package: linux (not installed) ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-36-generic root=UUID=d2f8f163-a1ee-4332-a910-d593309cd2a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.5.0-36.57~precise1-generic 3.5.7.14 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.5.0-36-generic N/A linux-backports-modules-3.5.0-36-generic N/A linux-firmware1.79.4 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no Tags: precise running-unity Uname: Linux 3.5.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio bluetooth boinc cdrom dip lp lpadmin netdev plugdev sambashare scanner sudo video dmi.bios.date: 04/08/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0501 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H87-PRO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0501:bd04/08/2013:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH87-PRO:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1203565/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post
[Kernel-packages] [Bug 1203565] Re: 045e:009c [H87-PRO] Microsoft Keyboard Elite for Bluetooth dead keys problem
Maeda, to see if this issue is addressed in a newer release, could you please test http://cdimage.ubuntu.com/daily-live/current/ and advise to the results? ** No longer affects: linux (Ubuntu) ** Changed in: bluez (Ubuntu) Importance: Undecided = Medium ** Changed in: bluez (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1203565 Title: 045e:009c [H87-PRO] Microsoft Keyboard Elite for Bluetooth dead keys problem Status in bluez package in Ubuntu: Incomplete Bug description: In Precise with 4.60 version of bluez I can pair my keyboard and mouse perfectly. === The problem is that dead keys of my keyboard (I mean -L or R- CTRL, ALT, SUPER, -L or R- SHIFT, ALT-GR) doesn't work with my current motherboard (whether application I opened, console included). It does work correctly with other motherboards. The new motherboard is an 1150 Haswell one from Asus. What I can say is : 1/ When booting, my BIOS recognize perfectly the dead keys of my keyboard, meaning that the bluetooth dongle or the motherboard is not directly concerned. 2/ When doing a second installation of Ubuntu, same problem. 3/ When trying the option 'keyboard layout' (whatever layout I choose), I don't see those dead keys flashing, meaning the system doesn't react at all when pressing them. 4/ By chance, I found another keyboard (same model, same brand), same problem, meaning the keyboard is not concerned (it works on the older motherboard, then it was poor chance that the keyboard broked just before reinstalling). 5/ Tried the setxkbmap command (with sudo or without), nothing's better 6/ Tried the xmodmap command, I see the 0x codes for Left SHIFT, all dead keys are there (see attachment) 7/ Normal keyboard (no wireless) works perfectly 8/ Put the dongle on an other usb slot doesn't change anything 9/ Command xev doesn't makes changes when pressing dead keys. For me it's clearly a Ubuntu's system bug, with my motherboard (Asus H87-PRO socket 1150). --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.25. ApportVersion: 2.0.1-0ubuntu17.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC0D0p: syl4375 F...m rhythmbox CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. Card0.Amixer.info: Card hw:0 'PAD'/'RME Digi96/8 PAD at 0xf400, irq 19' Mixer name : '' Components : '' Controls : 10 Simple ctrls : 6 Card1.Amixer.info: Card hw:1 'NVidia'/'HDA NVidia at 0xf308 irq 17' Mixer name : 'Nvidia GPU 14 HDMI/DP' Components : 'HDA:10de0014,10de0101,00100100' Controls : 24 Simple ctrls : 4 Card2.Amixer.info: Card hw:2 'NVidia_1'/'HDA NVidia at 0xe308 irq 16' Mixer name : 'Nvidia GPU 0a HDMI/DP' Components : 'HDA:10de000a,10de0101,00100100' Controls : 24 Simple ctrls : 4 DistroRelease: Ubuntu 12.04 MachineType: ASUS All Series MarkForUpload: True NonfreeKernelModules: nvidia Package: linux (not installed) ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-36-generic root=UUID=d2f8f163-a1ee-4332-a910-d593309cd2a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.5.0-36.57~precise1-generic 3.5.7.14 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.5.0-36-generic N/A linux-backports-modules-3.5.0-36-generic N/A linux-firmware1.79.4 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no Tags: precise running-unity Uname: Linux 3.5.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio bluetooth boinc cdrom dip lp lpadmin netdev plugdev sambashare scanner sudo video dmi.bios.date: 04/08/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0501 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H87-PRO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0501:bd04/08/2013:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH87-PRO:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1203565/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to :
[Kernel-packages] [Bug 1398533] Re: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10
Well, I must confess, for me this fix is sufficient. I will only use the simulated clicks anyway due to the clickpad's design, where the touch- senstive area covers the buttons which means if I use the hardware buttons to click on things, then the pointer will frequently deviate in the process of clicking, leading to undesirable results. That's not a bug, that's just poor hardware design. It still seems to be a bug, however, in that the hardware clicks cause a malfunction or otherwise cannot be used. This may be frustrating for a new user who is less inclined to fiddle with configurations or willing to compromise on the their clickpad's functionality. Specifically the bug is: clicking the hardware clickpad buttons causes all mouse input to malfunction. So I am uncertain how to mark it here. It's still a bug but it's one I can live with. If you would like, I can still mark it as invalid here or if you prefer, I am willing to continue testing to see if we can get the hardware buttons working too. Please advise me as to which would be best. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1398533 Title: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10 Status in linux package in Ubuntu: Confirmed Bug description: Edit (12/07): Updated bug description: clicking the hardware clickpad buttons causes all mouse input to malfunction. Edit: This bug is a possible duplicate of bug #1394869 So far, from what I can gather, the clickpad functions normally when using the touchpad portion to maneuver the onscreen pointer. However, the act of using one of the hardware click buttons causes it to malfunction. To test, I ran: xinput --test 11 and the output given shows a rapid stream of positioning data prior to the click, then no data after the click, however the mouse pointer appears to continue to move. However attempting to click on anything with the pointer after the first click of the clickpad registers as a click in the same location with either the clickpad or an external mouse until the clickpad is disabled with: xinput set-prop 11 Device Enabled 0 which of course causes the clickpad to cease function, however the USB mouse then continues to work normally. If you would like for me to perform any other tests, please let me know what I can try. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: amordea1737 F lxpanel CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: LXDE Date: Tue Dec 2 15:13:05 2014 HibernationDevice: RESUME=UUID=9d5cbd54-017f-45dc-a33f-f15e7196661a InstallationDate: Installed on 2014-12-02 (0 days ago) InstallationMedia: Lubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: Hewlett-Packard HP Stream Notebook PC 11 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=40a60a52-d575-4dd8-9425-7c22dbee89bd ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/25/2014 dmi.bios.vendor: Insyde dmi.bios.version: F.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8023 dmi.board.vendor: Hewlett-Packard dmi.board.version: 54.0D dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.02:bd09/25/2014:svnHewlett-Packard:pnHPStreamNotebookPC11:pvrType1-ProductConfigId:rvnHewlett-Packard:rn8023:rvr54.0D:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Stream Notebook PC 11 dmi.product.version: Type1 - ProductConfigId dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398533/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1398533] Re: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10
** Description changed: + Edit (12/07): Updated bug description: clicking the hardware clickpad + buttons causes all mouse input to malfunction. + Edit: This bug is a possible duplicate of bug #1394869 So far, from what I can gather, the clickpad functions normally when using the touchpad portion to maneuver the onscreen pointer. However, the act of using one of the hardware click buttons causes it to malfunction. To test, I ran: xinput --test 11 and the output given shows a rapid stream of positioning data prior to the click, then no data after the click, however the mouse pointer appears to continue to move. However attempting to click on anything with the pointer after the first click of the clickpad registers as a click in the same location with either the clickpad or an external mouse until the clickpad is disabled with: xinput set-prop 11 Device Enabled 0 which of course causes the clickpad to cease function, however the USB mouse then continues to work normally. If you would like for me to perform any other tests, please let me know what I can try. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: amordea1737 F lxpanel CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: LXDE Date: Tue Dec 2 15:13:05 2014 HibernationDevice: RESUME=UUID=9d5cbd54-017f-45dc-a33f-f15e7196661a InstallationDate: Installed on 2014-12-02 (0 days ago) InstallationMedia: Lubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: Hewlett-Packard HP Stream Notebook PC 11 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=40a60a52-d575-4dd8-9425-7c22dbee89bd ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/25/2014 dmi.bios.vendor: Insyde dmi.bios.version: F.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8023 dmi.board.vendor: Hewlett-Packard dmi.board.version: 54.0D dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.02:bd09/25/2014:svnHewlett-Packard:pnHPStreamNotebookPC11:pvrType1-ProductConfigId:rvnHewlett-Packard:rn8023:rvr54.0D:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Stream Notebook PC 11 dmi.product.version: Type1 - ProductConfigId dmi.sys.vendor: Hewlett-Packard ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1398533 Title: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10 Status in linux package in Ubuntu: Confirmed Bug description: Edit (12/07): Updated bug description: clicking the hardware clickpad buttons causes all mouse input to malfunction. Edit: This bug is a possible duplicate of bug #1394869 So far, from what I can gather, the clickpad functions normally when using the touchpad portion to maneuver the onscreen pointer. However, the act of using one of the hardware click buttons causes it to malfunction. To test, I ran: xinput --test 11 and the output given shows a rapid stream of positioning data prior to the click, then no data after the click, however the mouse pointer appears to continue to move. However attempting to click on anything with the pointer after the first click of the clickpad registers as a click in the same location with either the clickpad or an external mouse until the clickpad is disabled with: xinput set-prop 11 Device Enabled 0 which of course causes the clickpad to cease function, however the USB mouse then continues to work normally. If you would like for me to perform any other tests, please let me know what I can try. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: amordea1737 F lxpanel CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: LXDE Date: Tue Dec 2 15:13:05 2014 HibernationDevice:
[Kernel-packages] [Bug 1400144] [NEW] Sound is too fast in HDMI/DisplayPort but find in Analogue Output
Public bug reported: Playing music through the HDMI connection to my screen speakers results in the music being much faster than it should be, but the sound is normal through the earphones ... happens in rhythmbox and banshee. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-32-generic 3.13.0-32.57 ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: geoff 1990 F pulseaudio /dev/snd/controlC0: geoff 1990 F pulseaudio CurrentDesktop: Unity Date: Mon Dec 8 07:16:55 2014 HibernationDevice: RESUME=UUID=dfa3cfb6-5d5b-4c26-bbce-fee1cbe725be InstallationDate: Installed on 2014-12-06 (1 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64+mac (20140722.2) MachineType: Shuttle Inc. XH97V ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-32-generic N/A linux-backports-modules-3.13.0-32-generic N/A linux-firmware 1.127.5 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/28/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.02 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: FH97 dmi.board.vendor: Shuttle Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.02:bd08/28/2014:svnShuttleInc.:pnXH97V:pvrV1.0:rvnShuttleInc.:rnFH97:rvr1.0:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: XH97V dmi.product.version: V1.0 dmi.sys.vendor: Shuttle Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400144 Title: Sound is too fast in HDMI/DisplayPort but find in Analogue Output Status in linux package in Ubuntu: Confirmed Bug description: Playing music through the HDMI connection to my screen speakers results in the music being much faster than it should be, but the sound is normal through the earphones ... happens in rhythmbox and banshee. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-32-generic 3.13.0-32.57 ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: geoff 1990 F pulseaudio /dev/snd/controlC0: geoff 1990 F pulseaudio CurrentDesktop: Unity Date: Mon Dec 8 07:16:55 2014 HibernationDevice: RESUME=UUID=dfa3cfb6-5d5b-4c26-bbce-fee1cbe725be InstallationDate: Installed on 2014-12-06 (1 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64+mac (20140722.2) MachineType: Shuttle Inc. XH97V ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-32-generic N/A linux-backports-modules-3.13.0-32-generic N/A linux-firmware 1.127.5 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/28/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.02 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: FH97 dmi.board.vendor: Shuttle Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.02:bd08/28/2014:svnShuttleInc.:pnXH97V:pvrV1.0:rvnShuttleInc.:rnFH97:rvr1.0:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: XH97V dmi.product.version: V1.0 dmi.sys.vendor: Shuttle Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400144/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1400144] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400144 Title: Sound is too fast in HDMI/DisplayPort but find in Analogue Output Status in linux package in Ubuntu: Confirmed Bug description: Playing music through the HDMI connection to my screen speakers results in the music being much faster than it should be, but the sound is normal through the earphones ... happens in rhythmbox and banshee. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-32-generic 3.13.0-32.57 ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: geoff 1990 F pulseaudio /dev/snd/controlC0: geoff 1990 F pulseaudio CurrentDesktop: Unity Date: Mon Dec 8 07:16:55 2014 HibernationDevice: RESUME=UUID=dfa3cfb6-5d5b-4c26-bbce-fee1cbe725be InstallationDate: Installed on 2014-12-06 (1 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64+mac (20140722.2) MachineType: Shuttle Inc. XH97V ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-32-generic N/A linux-backports-modules-3.13.0-32-generic N/A linux-firmware 1.127.5 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/28/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.02 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: FH97 dmi.board.vendor: Shuttle Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.02:bd08/28/2014:svnShuttleInc.:pnXH97V:pvrV1.0:rvnShuttleInc.:rnFH97:rvr1.0:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: XH97V dmi.product.version: V1.0 dmi.sys.vendor: Shuttle Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400144/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1398533] Re: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10
Amordea Whiteoak: ...if I use the hardware buttons to click on things, then the pointer will frequently deviate in the process of clicking, leading to undesirable results. That's not a bug, that's just poor hardware design. This is actually not a poor hardware design, but a poor driver implementation for all clickpads as per the meta bug report: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-synaptics/+bug/1397924 The commands I provided to you previously WORKAROUND that problem. Despite this, the issue you are reporting is an upstream one. Could you please report this problem to the appropriate mailing list (linux-input, not linux-input-devel) by following the instructions _verbatim_ at https://wiki.ubuntu.com/Bugs/Upstream/kernel ? Please provide a direct URL to your e-mail to the mailing list once you have made it so that it may be tracked. Thank you for your understanding. ** Description changed: - Edit (12/07): Updated bug description: clicking the hardware clickpad - buttons causes all mouse input to malfunction. + After clicking once at the bottom of my clickpad on either button, if I + move my cursor elsewhere on the screen, and then subsequently click + again (with either clickpad or external mouse this time) it registers a + click at the location where my cursor icon was originally. I can + continue to move my cursor anywhere on the screen, and it still + registers the click in the original location. - Edit: This bug is a possible duplicate of bug #1394869 - - So far, from what I can gather, the clickpad functions normally when - using the touchpad portion to maneuver the onscreen pointer. However, - the act of using one of the hardware click buttons causes it to - malfunction. - - To test, I ran: - xinput --test 11 - and the output given shows a rapid stream of positioning data prior to the click, then no data after the click, however the mouse pointer appears to continue to move. However attempting to click on anything with the pointer after the first click of the clickpad registers as a click in the same location with either the clickpad or an external mouse until the clickpad is disabled with: + WORKAROUND: The following causes the clickpad to cease functioning, but allows the USB mouse to work normally: xinput set-prop 11 Device Enabled 0 - which of course causes the clickpad to cease function, however the USB mouse then continues to work normally. - - If you would like for me to perform any other tests, please let me know - what I can try. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: amordea1737 F lxpanel CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: LXDE Date: Tue Dec 2 15:13:05 2014 HibernationDevice: RESUME=UUID=9d5cbd54-017f-45dc-a33f-f15e7196661a InstallationDate: Installed on 2014-12-02 (0 days ago) InstallationMedia: Lubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: Hewlett-Packard HP Stream Notebook PC 11 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=40a60a52-d575-4dd8-9425-7c22dbee89bd ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/25/2014 dmi.bios.vendor: Insyde dmi.bios.version: F.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8023 dmi.board.vendor: Hewlett-Packard dmi.board.version: 54.0D dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.02:bd09/25/2014:svnHewlett-Packard:pnHPStreamNotebookPC11:pvrType1-ProductConfigId:rvnHewlett-Packard:rn8023:rvr54.0D:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Stream Notebook PC 11 dmi.product.version: Type1 - ProductConfigId dmi.sys.vendor: Hewlett-Packard ** Description changed: After clicking once at the bottom of my clickpad on either button, if I move my cursor elsewhere on the screen, and then subsequently click again (with either clickpad or external mouse this time) it registers a click at the location where my cursor icon was originally. I can continue to move my cursor anywhere on the screen, and it still registers the click in the original location. + + WORKAROUND: This problem doesn't happen if I tap the clickpad for a + simulated click. WORKAROUND: The following causes the clickpad to cease functioning, but
[Kernel-packages] [Bug 1398585] Re: [Inter 7260] Very slow and unstable WIFI
Pilot6, I added the tag with the meaning of the issue is not reproducible with the upstream kernel. However, the usage precedent of this tag is if both the problem is not reproducible in the upstream kernel, and the upstream kernel version is higher than the Ubuntu kernel after mapping. I'll remove it as it clearly caused confusion for folks, and update the definition of the tag at https://wiki.ubuntu.com/KernelTeam/KernelTeamBugPolicies so that this confusion is avoided in the future. BruceWouaigne, could you please test the latest upstream kernel available from the very top line at the top of the page (the release names are irrelevant for testing, and please do not test the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. If the test did not allow you to test to the issue (ex. you couldn't boot into the OS) please make a comment in your report about this, and continue to test the next most recent kernel version until you can test to the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested exactly shown as: kernel-fixed-upstream-3.18-rc7 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Changed in: linux (Ubuntu) Importance: Low = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete ** Tags removed: kernel-fixed-upstream -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1398585 Title: [Inter 7260] Very slow and unstable WIFI Status in linux package in Ubuntu: Incomplete Bug description: Using an Asus Zenbook UX303L, with the last kernel, wifi is almost unusable. The connection is VERY slow and keeps dropping. There was absolutely no problem with the linux-image-3.13.0-40-generic kernel. Tried turning off the power management of wlan0 without any changes. lspci -knn | grep Net -A2 02:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev 6b) Subsystem: Intel Corporation Dual Band Wireless-N 7260 [8086:c160] Kernel driver in use: iwlwifi Here is the speedtest output with the last kernel: ☺ ~⮀ speedtest Retrieving speedtest.net configuration... Retrieving speedtest.net server list... Testing from Orange (***)... Selecting best server based on latency... Hosted by iperf.fr (Rouen) [315.45 km]: 15.149 ms Testing download speed Download: 19.17 Mbits/s Testing upload speed.. Upload: 30.53 Mbits/s And after a rollback on the 3.13 ☺ ~⮀ speedtest Retrieving speedtest.net configuration... Retrieving speedtest.net server list... Testing from Orange (***)... Selecting best server based on latency... Hosted by TestDebit.info (Limoges) [264.48 km]: 13.848 ms Testing download speed Download: 61.95 Mbits/s Testing upload speed.. Upload: 71.33 Mbits/s ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.16.0-25-generic 3.16.0-25.33~14.04.2 ProcVersionSignature: Ubuntu 3.16.0-25.33~14.04.2-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 CurrentDesktop: GNOME Date: Tue Dec 2 22:39:01 2014 InstallationDate: Installed on 2014-11-20 (12 days ago) InstallationMedia: Ubuntu-GNOME 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: linux-lts-utopic UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: bruce 2241 F pulseaudio /dev/snd/pcmC1D0p: bruce 2241 F...m pulseaudio /dev/snd/controlC1: bruce 2241 F pulseaudio CurrentDesktop: GNOME DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=8a3f827c-19e2-473a-aeef-d988e7b1be88 InstallationDate: Installed on 2014-11-20 (12 days ago) InstallationMedia: Ubuntu-GNOME 14.04.1 LTS Trusty Tahr -
[Kernel-packages] [Bug 1293134] Re: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open
Downloaded and deployed the iso of 12.04 on an USB key. Did not work either. I remember that the resume did never work either with 12.10 or 13.04 and so on. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1293134 Title: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open Status in linux package in Ubuntu: Incomplete Bug description: In 13.10-14.10, what is expected in to happen is when I close the lid, it puts the computer to sleep, and when I reopen the lid, it automatically resumes from sleep. What happens instead, is that the computer goes to sleep, but opening the lid does not make it resume. With acpi_listen I see that it fires and recognizes the events for lid close and open. /proc/acpi/button/lid/LID0/state shows the correct state for each lid position. With: acpid -d -f -l I see that those events trigger /etc/acpi/events/. I tried writing an event that matches lid close/open and calls pm-suspend, uncommenting lines in /etc/systemd/logind.conf regarding hibernate and suspend, echoing LID0 into /etc/acpi/wakeup, passing different acpi_osi strings with grub but the ACPI table does not change nor make it any difference for the suspend/resume problem. WORKAROUND: To resume, open the lid and press the power button once. --- ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2013-12-02 (104 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MarkForUpload: True NonfreeKernelModules: wl Package: pm-utils 1.4.1-12ubuntu1 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.11.0-18.32-generic 3.11.10.4 Tags: saucy Uname: Linux 3.11.0-18-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lars 4065 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=63d413ce-f76a-4aef-8728-6b94c8328c5a InstallationDate: Installed on 2014-11-19 (16 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: SAMSUNG ELECTRONICS CO., LTD. 700Z3A/700Z4A/700Z5A/700Z5B NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-25-generic root=UUID=44843d26-d39a-43f4-bfd7-bb8b6bb69a91 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-25-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/06/2012 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: 15FD dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvr15FD:bd11/06/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pn700Z3A/700Z4A/700Z5A/700Z5B:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rn700Z3A/700Z4A/700Z5A/700Z5B:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1293134/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1396338] Re: [Dell Latitude E7440] Wifi keeps dropping with Intel Wireless 7260
Thanks. I would still like to point out that the list http://people.canonical.com/~kernel/info/kernel-version-map.html is not up to date regarding kernel version 3.16-ubuntu, and that updating it could have saved some compilation hours in this case. However, Vanilla 3.15 fails with the same error in dmesg, so the error is fixed in the upstream kernel between 3.15 and 3.16, and this commit did not make it into the ubuntu version 3.16. I have now begun reverse commit bisecting between upstream kernels 3.15 and 3.16, but this will take some time to finish - each kernel build takes about an hour, and must be run at least a few hours to be certain if it is good or bad, so best case will be about a month from now. I hope that this information can help someone - otherwise, for now just upgrade to upstream version 3.16 or later, and you should be good. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1396338 Title: [Dell Latitude E7440] Wifi keeps dropping with Intel Wireless 7260 Status in linux package in Ubuntu: Incomplete Bug description: After the connection is dropped, a hardware switch disconnect/connect is necessary to re-establish connection, the connection does not automatically reappear. The problematic line in the dmesg output is: wlan0: deauthenticated from 00:16:b6:01:69:74 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) The frequency of the problem drops considerably moving to a less congested channel, but it still happens - I am stationary at about 3 meters from the access point. Other devices (Android phones, iPad, other laptops) are connecting to the same access point with no problems at all. Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 [8086:4470] ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-24-generic 3.16.0-24.32 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: niels 2502 F pulseaudio /dev/snd/controlC1: niels 2502 F pulseaudio CurrentDesktop: Unity Date: Tue Nov 25 21:24:21 2014 HibernationDevice: RESUME=UUID=fe0b3838-4f25-4296-a7c7-872862359ccf InstallationDate: Installed on 2014-10-16 (40 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) MachineType: Dell Inc. Latitude E7440 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=28b33773-57cd-4cb6-bd65-1c2acadbd079 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-24-generic N/A linux-backports-modules-3.16.0-24-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: Upgraded to utopic on 2014-10-25 (31 days ago) dmi.bios.date: 06/26/2014 dmi.bios.vendor: Dell Inc. dmi.bios.version: A10 dmi.board.name: 03HFCG dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA10:bd06/26/2014:svnDellInc.:pnLatitudeE7440:pvr01:rvnDellInc.:rn03HFCG:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E7440 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1396338/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1293134] Re: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open
Lars Schütze, the issue you are reporting is an upstream one. Could you please report this problem to the appropriate mailing list (linux-acpi, not linux-acpi-devel) by following the instructions _verbatim_ at https://wiki.ubuntu.com/Bugs/Upstream/kernel ? Please provide a direct URL to your e-mail to the mailing list once you have made it so that it may be tracked. Thank you for your understanding. ** Tags added: precise quantal raring ** Changed in: linux (Ubuntu) Status: Incomplete = Triaged -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1293134 Title: [Samsung 700Z3A-S02DE] Laptop does not resume from suspend upon lid open Status in linux package in Ubuntu: Triaged Bug description: In 13.10-14.10, what is expected in to happen is when I close the lid, it puts the computer to sleep, and when I reopen the lid, it automatically resumes from sleep. What happens instead, is that the computer goes to sleep, but opening the lid does not make it resume. With acpi_listen I see that it fires and recognizes the events for lid close and open. /proc/acpi/button/lid/LID0/state shows the correct state for each lid position. With: acpid -d -f -l I see that those events trigger /etc/acpi/events/. I tried writing an event that matches lid close/open and calls pm-suspend, uncommenting lines in /etc/systemd/logind.conf regarding hibernate and suspend, echoing LID0 into /etc/acpi/wakeup, passing different acpi_osi strings with grub but the ACPI table does not change nor make it any difference for the suspend/resume problem. WORKAROUND: To resume, open the lid and press the power button once. --- ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2013-12-02 (104 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MarkForUpload: True NonfreeKernelModules: wl Package: pm-utils 1.4.1-12ubuntu1 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.11.0-18.32-generic 3.11.10.4 Tags: saucy Uname: Linux 3.11.0-18-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lars 4065 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.10 HibernationDevice: RESUME=UUID=63d413ce-f76a-4aef-8728-6b94c8328c5a InstallationDate: Installed on 2014-11-19 (16 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: SAMSUNG ELECTRONICS CO., LTD. 700Z3A/700Z4A/700Z5A/700Z5B NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-25-generic root=UUID=44843d26-d39a-43f4-bfd7-bb8b6bb69a91 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 Tags: utopic Uname: Linux 3.16.0-25-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/06/2012 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: 15FD dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvr15FD:bd11/06/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pn700Z3A/700Z4A/700Z5A/700Z5B:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rn700Z3A/700Z4A/700Z5A/700Z5B:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 700Z3A/700Z4A/700Z5A/700Z5B dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1293134/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1398848] Re: USB device not loading
** Tags added: bios-outdated-f13 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1398848 Title: USB device not loading Status in linux package in Ubuntu: Incomplete Bug description: device: AVIS Mbox, a DA- and AD-converter, providing. In previous Ubuntu not quite stable - occasionally no loading, needed to be in the same slot always. But after update this morning Dec 3 (from system log): error -75, usb5-port2: unable to enumerate USB device. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: allan 2188 F pulseaudio /dev/snd/controlC1: allan 2188 F pulseaudio CurrentDesktop: Unity Date: Wed Dec 3 15:22:51 2014 GvfsMonitorLog: Monitoring events. Press Ctrl+C to quit. HibernationDevice: RESUME=UUID=d2efc1de-b777-44f4-8ef1-5b2e522454eb HotplugNewDevices: HotplugNewMounts: InstallationDate: Installed on 2012-08-21 (833 days ago) InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) IwConfig: eth0 no wireless extensions. eth1 no wireless extensions. lono wireless extensions. MachineType: Gigabyte Technology Co., Ltd. EX58-UD5 ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic root=UUID=66f62c1d-e446-4c60-ac15-addecbc944bc ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 RfKill: SourcePackage: linux Symptom: storage UdevMonitorLog: monitor will print the received events for: UDEV - the event which udev sends out after rule processing UdisksMonitorLog: Monitoring the udisks daemon. Press Ctrl+C to exit. 15:23:20.897: The udisks-daemon is running (name-owner :1.44). UpgradeStatus: Upgraded to utopic on 2014-10-24 (39 days ago) dmi.bios.date: 05/11/2009 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: F7 dmi.board.name: EX58-UD5 dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF7:bd05/11/2009:svnGigabyteTechnologyCo.,Ltd.:pnEX58-UD5:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnEX58-UD5:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: EX58-UD5 dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398848/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1398883] Re: [HP ProLiant DL160se G6 Server] System crashes after saving a virtual machine
** Summary changed: - System crashes after saving a virtual machine + [HP ProLiant DL160se G6 Server] System crashes after saving a virtual machine ** Tags removed: needs-full-computer-model ** Tags added: bios-outdated-2013.07.01 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1398883 Title: [HP ProLiant DL160se G6 Server] System crashes after saving a virtual machine Status in linux package in Ubuntu: Incomplete Bug description: I think this problem is connected to bug 1388329? ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-40-generic 3.13.0-40.69 ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10 Uname: Linux 3.13.0-40-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 dec 3 17:00 seq crw-rw 1 root audio 116, 33 dec 3 17:00 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Date: Wed Dec 3 17:20:41 2014 HibernationDevice: RESUME=/dev/mapper/CmsrvVH2--vg-swap_1 InstallationDate: Installed on 2014-10-31 (32 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) MachineType: HP ProLiant SE316M1R2 PciMultimedia: ProcEnviron: LANGUAGE=nl_BE:nl TERM=xterm PATH=(custom, no user) LANG=nl_BE.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-40-generic root=/dev/mapper/hostname--vg-root ro nomodeset RelatedPackageVersions: linux-restricted-modules-3.13.0-40-generic N/A linux-backports-modules-3.13.0-40-generic N/A linux-firmware 1.127.8 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/05/2011 dmi.bios.vendor: HP dmi.bios.version: R02 dmi.chassis.type: 23 dmi.chassis.vendor: HP dmi.modalias: dmi:bvnHP:bvrR02:bd05/05/2011:svnHP:pnProLiantSE316M1R2:pvr:cvnHP:ct23:cvr: dmi.product.name: ProLiant SE316M1R2 dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398883/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1400164] [NEW] gspca_vc032x module doesn't work properly with 046d:0892 Logitech, Inc. OrbiCam
Public bug reported: Webcam turns on and have green led on but video is mostly green and choppy low resolution image is displayed. Testing with cheese application. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-40-generic 3.13.0-40.69 ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10 Uname: Linux 3.13.0-40-generic i686 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: fatma 1471 F pulseaudio Date: Mon Dec 8 00:40:26 2014 HibernationDevice: RESUME=UUID=de0aea26-1256-4f15-ba8e-251d4fef5a33 InstallationDate: Installed on 2014-12-06 (1 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release i386 (20140722.2) MachineType: Acer, inc. TravelMate 8200 ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=tr_TR.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-40-generic root=UUID=053ce5cb-5862-4c9c-9107-bf8277f323c6 ro persistent quiet splash radeon.dpm=1 vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-40-generic N/A linux-backports-modules-3.13.0-40-generic N/A linux-firmware 1.127.10 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: Dec 8 00:31:46 tm8200 wpa_supplicant[749]: message repeated 15 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ] Dec 8 00:32:12 tm8200 wpa_supplicant[749]: wlan0: WPA: Group rekeying completed with ac:22:0b:ce:8d:d4 [GTK=CCMP] Dec 8 00:32:45 tm8200 kernel: [ 1722.95] perf samples too long (2501 2500), lowering kernel.perf_event_max_sample_rate to 5 Dec 8 00:33:46 tm8200 wpa_supplicant[749]: wlan0: CTRL-EVENT-SCAN-STARTED dmi.bios.date: 02/08/07 dmi.bios.vendor: Acer dmi.bios.version: v1.3521 dmi.board.name: Como dmi.board.vendor: Acer, Inc. dmi.board.version: Not Applicable dmi.chassis.type: 1 dmi.chassis.vendor: , Inc. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAcer:bvrv1.3521:bd02/08/07:svnAcer,inc.:pnTravelMate8200:pvrNotApplicable:rvnAcer,Inc.:rnComo:rvrNotApplicable:cvn,Inc.:ct1:cvrN/A: dmi.product.name: TravelMate 8200 dmi.product.version: Not Applicable dmi.sys.vendor: Acer, inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400164 Title: gspca_vc032x module doesn't work properly with 046d:0892 Logitech, Inc. OrbiCam Status in linux package in Ubuntu: New Bug description: Webcam turns on and have green led on but video is mostly green and choppy low resolution image is displayed. Testing with cheese application. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-40-generic 3.13.0-40.69 ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10 Uname: Linux 3.13.0-40-generic i686 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: fatma 1471 F pulseaudio Date: Mon Dec 8 00:40:26 2014 HibernationDevice: RESUME=UUID=de0aea26-1256-4f15-ba8e-251d4fef5a33 InstallationDate: Installed on 2014-12-06 (1 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release i386 (20140722.2) MachineType: Acer, inc. TravelMate 8200 ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=tr_TR.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-40-generic root=UUID=053ce5cb-5862-4c9c-9107-bf8277f323c6 ro persistent quiet splash radeon.dpm=1 vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-40-generic N/A linux-backports-modules-3.13.0-40-generic N/A linux-firmware 1.127.10 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: Dec 8 00:31:46 tm8200 wpa_supplicant[749]: message repeated 15 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ] Dec 8 00:32:12 tm8200 wpa_supplicant[749]: wlan0: WPA: Group rekeying completed with ac:22:0b:ce:8d:d4 [GTK=CCMP] Dec 8 00:32:45 tm8200 kernel: [ 1722.95] perf samples too long (2501 2500), lowering kernel.perf_event_max_sample_rate to 5 Dec 8 00:33:46 tm8200 wpa_supplicant[749]: wlan0: CTRL-EVENT-SCAN-STARTED dmi.bios.date: 02/08/07 dmi.bios.vendor: Acer dmi.bios.version: v1.3521 dmi.board.name: Como dmi.board.vendor: Acer, Inc. dmi.board.version: Not Applicable dmi.chassis.type: 1 dmi.chassis.vendor: , Inc.
[Kernel-packages] [Bug 1398959] Re: iwlwifi:25.222.9.0:0x00003063 | ADVANCED_SYSASSERT
** Changed in: linux (Ubuntu) Status: Incomplete = New ** Tags added: bot-stop-nagging ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1398959 Title: iwlwifi:25.222.9.0:0x3063 | ADVANCED_SYSASSERT Status in linux package in Ubuntu: Confirmed Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding linux. This problem was most recently seen with version 3.17.2-031702.201410301416, the problem page at https://errors.ubuntu.com/problem/1e2601bf005e72f0916be743514e28bbb985b028 contains more details. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398959/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1399064] Re: bridges cannot have a mtu 1500 by themselves
** Tags added: latest-bios-1.45 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1399064 Title: bridges cannot have a mtu 1500 by themselves Status in linux package in Ubuntu: Triaged Bug description: A linux bridge always adopts the smallest MTU of the enslaved devices. When no device are enslaved, it defaults to a MTU of 1500 and refuses to use a larger one. This is problematic when using bridges enslaving only virtual NICs (vnetX) like it's common with KVM guests. Steps to reproduce the problem 1) sudo ip link add br-test0 type bridge # create an empty bridge 2) sudo ip link set br-test0 mtu 9000# attempt to set MTU 1500 3) ip link show dev br-test0 # confirm MTU Here, 2) returns RTNETLINK answers: Invalid argument. One (cumbersome) way around this is: 4) sudo modprobe dummy 5) sudo ip link set dummy0 mtu 9000 master br-test0 Then the bridge's MTU can be changed from anywhere to 9000. This bug is especially annoying for the virtualization case because the KVM's tap driver will by default adopt the bridge's MTU on startup making it impossible (without the workaround) to use a large MTU on the guest VMs. Additional information: $ lsb_release -rd Description: Ubuntu 14.04.1 LTS Release: 14.04 $ apt-cache policy linux-image-3.13.0-41-generic iproute2 linux-image-3.13.0-41-generic: Installed: 3.13.0-41.70 Candidate: 3.13.0-41.70 Version table: *** 3.13.0-41.70 0 500 http://archive.ubuntu.com/ubuntu/ trusty-proposed/main amd64 Packages 100 /var/lib/dpkg/status iproute2: Installed: 3.12.0-2 Candidate: 3.12.0-2 Version table: *** 3.12.0-2 0 500 http://archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-41-generic 3.13.0-41.70 ProcVersionSignature: Ubuntu 3.13.0-41.70-generic 3.13.11.11 Uname: Linux 3.13.0-41-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: simon 4594 F pulseaudio CurrentDesktop: Unity CurrentDmesg: dmesg: klogctl failed: Operation not permitted Date: Wed Dec 3 23:02:25 2014 HibernationDevice: RESUME=UUID=8e7a3220-158f-413b-81b2-55b236bb1f3f InstallationDate: Installed on 2014-01-26 (311 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140124) MachineType: LENOVO 2516CTO ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-41-generic root=/dev/mapper/crypt-root ro quiet splash cryptopts=target=crypt,source=/dev/sda1,lvm=crypt-root possible_cpus=4 nmi_watchdog=0 vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-41-generic N/A linux-backports-modules-3.13.0-41-generic N/A linux-firmware 1.127.10 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/14/2013 dmi.bios.vendor: LENOVO dmi.bios.version: 6IET85WW (1.45 ) dmi.board.name: 2516CTO dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6IET85WW(1.45):bd02/14/2013:svnLENOVO:pn2516CTO:pvrThinkPadT410:rvnLENOVO:rn2516CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2516CTO dmi.product.version: ThinkPad T410 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1399064/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1399611] Re: Screen brightness not working acer aspire 5742
Merlijn Sebrechts, as per http://us.acer.com/ac/en/US/content/drivers an update to your BIOS is available (1.30). If you update to this following https://help.ubuntu.com/community/BIOSUpdate does it change anything? If it doesn't, could you please both specify what happened, and provide the output of the following terminal command: sudo dmidecode -s bios-version sudo dmidecode -s bios-release-date For more on BIOS updates and linux, please see https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette . Please note your current BIOS is already in the Bug Description, so posting this on the old BIOS would not be helpful. As well, you don't have to create a new bug report. Once the BIOS is updated, then please mark this report Status Confirmed. Thank you for your understanding. ** Tags added: bios-outdated-1.30 ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1399611 Title: Screen brightness not working acer aspire 5742 Status in linux package in Ubuntu: Incomplete Bug description: My laptop does not respond to the screen brightness control after default Ubuntu install. The following workaround worked: http://askubuntu.com/a/450594 It adds a config file to /usr/share/X11/xorg.conf.d/ adding acpi_backlight=vendor to boot params did nothing adding acpi_osi=Linux to boot params only fixed the keyboard shortcuts, but the screen indicator and the brightness settings dialog stopped working. Please let me know if this is not the right package, or if you need more info. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-40-generic 3.13.0-40.69 ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10 Uname: Linux 3.13.0-40-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lies 2944 F pulseaudio CurrentDesktop: Unity Date: Fri Dec 5 12:06:41 2014 HibernationDevice: RESUME=UUID=36715a89-8cd7-40cd-8d29-94f983036914 InstallationDate: Installed on 2014-11-23 (11 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) Lsusb: Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 04f2:b1d8 Chicony Electronics Co., Ltd Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire 5742 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-40-generic root=UUID=1bc3ee22-b016-4fcc-9668-30363b56faa9 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-40-generic N/A linux-backports-modules-3.13.0-40-generic N/A linux-firmware 1.127.10 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/11/2010 dmi.bios.vendor: Acer dmi.bios.version: V1.04 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: Aspire 5742 dmi.board.vendor: Acer dmi.board.version: V1.04 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V1.04 dmi.modalias: dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742:pvrV1.04:rvnAcer:rnAspire5742:rvrV1.04:cvnAcer:ct10:cvrV1.04: dmi.product.name: Aspire 5742 dmi.product.version: V1.04 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1399611/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1399200] Re: Qualcomm Atheros AR9485 (Asus R512C) - disabled in hardware at login
** Tags added: bios-outdated-210 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1399200 Title: Qualcomm Atheros AR9485 (Asus R512C) - disabled in hardware at login Status in linux package in Ubuntu: Incomplete Bug description: To enable Qualcomm Atheros AR9485 Wireless Network Adapter I need to put the computer in sleep mode, then wake it up. Voila! The wifi adapter is activated. This is a Asus R512C laptop. The function key for enabling/disabling Wifi is not working, but I noticed waking up from sleep would automatically activate the Wifi device. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-40-generic 3.13.0-40.69 ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10 Uname: Linux 3.13.0-40-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: infoglob 1609 F pulseaudio CurrentDesktop: Unity Date: Thu Dec 4 14:50:50 2014 HibernationDevice: RESUME=UUID=e0b9cb80-a840-4679-be18-b5b6fc3098ce InstallationDate: Installed on 2014-12-04 (0 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) MachineType: ASUSTeK COMPUTER INC. X551CAP ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=e4bddae4-299f-4ecc-8f46-918a55db2024 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-40-generic N/A linux-backports-modules-3.13.0-40-generic N/A linux-firmware 1.127.10 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/15/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X551CAP.201 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X551CAP dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX551CAP.201:bd07/15/2013:svnASUSTeKCOMPUTERINC.:pnX551CAP:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX551CAP:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X551CAP dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1399200/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1400164] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400164 Title: gspca_vc032x module doesn't work properly with 046d:0892 Logitech, Inc. OrbiCam Status in linux package in Ubuntu: Confirmed Bug description: Webcam turns on and have green led on but video is mostly green and choppy low resolution image is displayed. Testing with cheese application. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-40-generic 3.13.0-40.69 ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10 Uname: Linux 3.13.0-40-generic i686 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: fatma 1471 F pulseaudio Date: Mon Dec 8 00:40:26 2014 HibernationDevice: RESUME=UUID=de0aea26-1256-4f15-ba8e-251d4fef5a33 InstallationDate: Installed on 2014-12-06 (1 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release i386 (20140722.2) MachineType: Acer, inc. TravelMate 8200 ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=tr_TR.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-40-generic root=UUID=053ce5cb-5862-4c9c-9107-bf8277f323c6 ro persistent quiet splash radeon.dpm=1 vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-40-generic N/A linux-backports-modules-3.13.0-40-generic N/A linux-firmware 1.127.10 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: Dec 8 00:31:46 tm8200 wpa_supplicant[749]: message repeated 15 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ] Dec 8 00:32:12 tm8200 wpa_supplicant[749]: wlan0: WPA: Group rekeying completed with ac:22:0b:ce:8d:d4 [GTK=CCMP] Dec 8 00:32:45 tm8200 kernel: [ 1722.95] perf samples too long (2501 2500), lowering kernel.perf_event_max_sample_rate to 5 Dec 8 00:33:46 tm8200 wpa_supplicant[749]: wlan0: CTRL-EVENT-SCAN-STARTED dmi.bios.date: 02/08/07 dmi.bios.vendor: Acer dmi.bios.version: v1.3521 dmi.board.name: Como dmi.board.vendor: Acer, Inc. dmi.board.version: Not Applicable dmi.chassis.type: 1 dmi.chassis.vendor: , Inc. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAcer:bvrv1.3521:bd02/08/07:svnAcer,inc.:pnTravelMate8200:pvrNotApplicable:rvnAcer,Inc.:rnComo:rvrNotApplicable:cvn,Inc.:ct1:cvrN/A: dmi.product.name: TravelMate 8200 dmi.product.version: Not Applicable dmi.sys.vendor: Acer, inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400164/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1398533] Re: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10
As a request, do you think it would be possible to find a workaround for a double-click issue with the touchpad? Double-tapping does function, but it seems to only function in one of two ways: firstly, by double- tapping extremely quickly. There seems to be a 200ms window here, which is uncomfortably brief. An alternative method seems to be to triple-tap, which is interpreted as a double-click. There is a much larger window here, but it is not an ideal fix. Thank you. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1398533 Title: [HP Stream Notebook - 11-d010nr] clickpad malfunctions after performing a click in Lubuntu 14.10 Status in linux package in Ubuntu: Triaged Bug description: After clicking once at the bottom of my clickpad on either button, if I move my cursor elsewhere on the screen, and then subsequently click again (with either clickpad or external mouse this time) it registers a click at the location where my cursor icon was originally. I can continue to move my cursor anywhere on the screen, and it still registers the click in the original location. WORKAROUND: This problem doesn't happen if I tap the clickpad for a simulated click. WORKAROUND: The following causes the clickpad to cease functioning, but allows the USB mouse to work normally: xinput set-prop 11 Device Enabled 0 ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: amordea1737 F lxpanel CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: LXDE Date: Tue Dec 2 15:13:05 2014 HibernationDevice: RESUME=UUID=9d5cbd54-017f-45dc-a33f-f15e7196661a InstallationDate: Installed on 2014-12-02 (0 days ago) InstallationMedia: Lubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: Hewlett-Packard HP Stream Notebook PC 11 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=40a60a52-d575-4dd8-9425-7c22dbee89bd ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/25/2014 dmi.bios.vendor: Insyde dmi.bios.version: F.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8023 dmi.board.vendor: Hewlett-Packard dmi.board.version: 54.0D dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.02:bd09/25/2014:svnHewlett-Packard:pnHPStreamNotebookPC11:pvrType1-ProductConfigId:rvnHewlett-Packard:rn8023:rvr54.0D:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Stream Notebook PC 11 dmi.product.version: Type1 - ProductConfigId dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398533/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1399751] Re: Changes to screen brightness delayed
** Tags added: bios-outdated-2.60 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1399751 Title: Changes to screen brightness delayed Status in linux package in Ubuntu: Incomplete Bug description: This has changed (during a recent update?) but under 14.04 my hotkeys for changing the screen brightness no longer work immeidately. Their effect is now delayed by about 10 seconds. there is no hangup to the user interface during that time. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-40-generic 3.13.0-40.69 ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10 Uname: Linux 3.13.0-40-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: cpbl 3437 F pulseaudio CurrentDesktop: Unity Date: Fri Dec 5 13:18:46 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2014-11-14 (20 days ago) InstallationMedia: Ubuntu 12.04.5 LTS Precise Pangolin - Release amd64 (20140807.1) MachineType: LENOVO 34372VU ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-40-generic root=UUID=92076c43-2780-4000-8d3d-5d7bdbb54643 ro acpi=noirq quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-40-generic N/A linux-backports-modules-3.13.0-40-generic N/A linux-firmware 1.127.10 SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-11-15 (19 days ago) dmi.bios.date: 05/28/2014 dmi.bios.vendor: LENOVO dmi.bios.version: GCET99WW (2.59 ) dmi.board.asset.tag: Not Available dmi.board.name: 34372VU dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrGCET99WW(2.59):bd05/28/2014:svnLENOVO:pn34372VU:pvrThinkPadX230Tablet:rvnLENOVO:rn34372VU:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 34372VU dmi.product.version: ThinkPad X230 Tablet dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1399751/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1399823] Re: Backlight doesn't work on Samsung np730U3E-S01PL
bademux, thank you for reporting this and helping make Ubuntu better. Just to advise, in the future please do not compress/tar attachments as it makes it harder for developers and triagers to help you. Despite this, could you please test the latest upstream kernel available from the very top line at the top of the page (the release names are irrelevant for testing, and please do not test the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. If the test did not allow you to test to the issue (ex. you couldn't boot into the OS) please make a comment in your report about this, and continue to test the next most recent kernel version until you can test to the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested exactly shown as: kernel-fixed-upstream-3.18-rc7 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete ** Summary changed: - Backlight doesn't work on Samsung np730U3E-S01PL + [Samsung NP730U3E-S01PL] LCD backlight doesn't work -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1399823 Title: [Samsung NP730U3E-S01PL] LCD backlight doesn't work Status in linux package in Ubuntu: Incomplete Bug description: Backlight, no LCD, neither keyboard, doesn't work. echo 1 /sys/class/backlight/intel_backlight/brightness #nothig changes echo 0 /sys/class/backlight/intel_backlight/brightness #turns off LCD backlight there is no /proc/sys/video/use_native_backlight acpi_backlight =... # no effect at all # grep . /sys/class/backlight/intel_backlight/* /sys/class/backlight/intel_backlight/actual_brightness:8 /sys/class/backlight/intel_backlight/bl_power:0 /sys/class/backlight/intel_backlight/brightness:8 grep: /sys/class/backlight/intel_backlight/device: Jest katalogiem /sys/class/backlight/intel_backlight/max_brightness:4650 grep: /sys/class/backlight/intel_backlight/power: Jest katalogiem grep: /sys/class/backlight/intel_backlight/subsystem: Jest katalogiem /sys/class/backlight/intel_backlight/type:raw # dmesg|grep 'ACPI: Video' [1.766081] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [1.767014] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no # lspci |grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kasia 2021 F pulseaudio Date: Sat Dec 6 00:16:19 2014 HibernationDevice: RESUME=UUID=aa9f54d4-8ed7-4e2b-9107-8ffa2b36e88e InstallationDate: Installed on 2014-12-05 (0 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: SAMSUNG ELECTRONICS CO., LTD. 730U3E/740U3E ProcEnviron: LANGUAGE=pl TERM=xterm PATH=(custom, no user) LANG=pl_PL.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-25-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash acpi_backlight=vendor vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/26/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P07ABW.065.140226.dg dmi.board.asset.tag: No Asset Tag dmi.board.name: NP730U3E-S01PL dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SEC_SW_REVISION_1234567890ABCD dmi.chassis.asset.tag: No Asset Tag
[Kernel-packages] [Bug 1400175] [NEW] Acer Aspire ES1-311-P1D5 won't shutdown after system halted
Public bug reported: I am running Ubuntu 14.10 on my notebook and my system won't shutdown after it halted. It worked with Fedora Linux which used Kernel 3.11. I tried the four latest Mainline Kernels which didn't work either. Currently I am running the latest Kernel from the repos: 3.16.0-25.33 I tried different kernel parameters like acpi=force and so on, but It also didn't work. I am not sure what else to do. Reboot also does not work. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christian 2182 F pulseaudio CurrentDesktop: Unity Date: Sun Dec 7 23:59:10 2014 HibernationDevice: RESUME=UUID=9f5a2d88-7f02-45a7-adcb-258009ca9923 InstallationDate: Installed on 2014-11-14 (23 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 004: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire ES1-311 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=bea9ee8a-9b50-4c65-b701-82df465b5180 ro nosplash RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/13/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Aspire ES1-311 dmi.board.vendor: Acer dmi.board.version: V1.07 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V1.07 dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.07:bd08/13/2014:svnAcer:pnAspireES1-311:pvrV1.07:rvnAcer:rnAspireES1-311:rvrV1.07:cvnAcer:ct10:cvrV1.07: dmi.product.name: Aspire ES1-311 dmi.product.version: V1.07 dmi.sys.vendor: Acer ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug utopic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400175 Title: Acer Aspire ES1-311-P1D5 won't shutdown after system halted Status in linux package in Ubuntu: New Bug description: I am running Ubuntu 14.10 on my notebook and my system won't shutdown after it halted. It worked with Fedora Linux which used Kernel 3.11. I tried the four latest Mainline Kernels which didn't work either. Currently I am running the latest Kernel from the repos: 3.16.0-25.33 I tried different kernel parameters like acpi=force and so on, but It also didn't work. I am not sure what else to do. Reboot also does not work. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christian 2182 F pulseaudio CurrentDesktop: Unity Date: Sun Dec 7 23:59:10 2014 HibernationDevice: RESUME=UUID=9f5a2d88-7f02-45a7-adcb-258009ca9923 InstallationDate: Installed on 2014-11-14 (23 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 004: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire ES1-311 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=bea9ee8a-9b50-4c65-b701-82df465b5180 ro nosplash RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/13/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Aspire ES1-311 dmi.board.vendor: Acer dmi.board.version: V1.07 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V1.07 dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.07:bd08/13/2014:svnAcer:pnAspireES1-311:pvrV1.07:rvnAcer:rnAspireES1-311:rvrV1.07:cvnAcer:ct10:cvrV1.07: dmi.product.name:
[Kernel-packages] [Bug 1399842] Re: Ubuntu 14.04 LTS hangs on reboot
Mark Bohn, thank you for reporting this and helping make Ubuntu better. Could you please test the latest upstream kernel available from the very top line at the top of the page (the release names are irrelevant for testing, and please do not test the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. If the test did not allow you to test to the issue (ex. you couldn't boot into the OS) please make a comment in your report about this, and continue to test the next most recent kernel version until you can test to the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested exactly shown as: kernel-fixed-upstream-3.18-rc7 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags added: latest-bios-a16 ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1399842 Title: Ubuntu 14.04 LTS hangs on reboot Status in linux package in Ubuntu: Incomplete Bug description: Linux silpion 3.13.0-40-generic #69-Ubuntu SMP Thu Nov 13 17:53:56 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Fresh install - ssh, Samba, Postfix Most times (but not all), when attempting to reboot, the system hangs with the following message: INFO: task kworker/0:2:212 blocked for more than 120 seconds. Not tainted 3.13.0-40-generic #69-Ubuntu I have done 3 clean installs on 3 identical PCs, all with the same result. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-40-generic 3.13.0-40.69 ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10 Uname: Linux 3.13.0-40-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.13.0-40-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/pcmC0D2c', '/dev/snd/pcmC0D2p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CurrentDmesg: [ 42.901230] init: plymouth-upstart-bridge main process ended, respawning Date: Fri Dec 5 16:22:51 2014 HibernationDevice: RESUME=/dev/mapper/silpion--vg-swap_1 InstallationDate: Installed on 2014-12-02 (3 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: Dell Inc. Precision WorkStation T7500 ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-40-generic root=/dev/mapper/hostname--vg-root ro RelatedPackageVersions: linux-restricted-modules-3.13.0-40-generic N/A linux-backports-modules-3.13.0-40-generic N/A linux-firmware 1.127.10 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/28/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A16 dmi.board.name: 06FW8P dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 7 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA16:bd05/28/2013:svnDellInc.:pnPrecisionWorkStationT7500:pvr:rvnDellInc.:rn06FW8P:rvrA00:cvnDellInc.:ct7:cvr: dmi.product.name: Precision WorkStation T7500 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1399842/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe :
[Kernel-packages] [Bug 1400175] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400175 Title: Acer Aspire ES1-311-P1D5 won't shutdown after system halted Status in linux package in Ubuntu: Confirmed Bug description: I am running Ubuntu 14.10 on my notebook and my system won't shutdown after it halted. It worked with Fedora Linux which used Kernel 3.11. I tried the four latest Mainline Kernels which didn't work either. Currently I am running the latest Kernel from the repos: 3.16.0-25.33 I tried different kernel parameters like acpi=force and so on, but It also didn't work. I am not sure what else to do. Reboot also does not work. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christian 2182 F pulseaudio CurrentDesktop: Unity Date: Sun Dec 7 23:59:10 2014 HibernationDevice: RESUME=UUID=9f5a2d88-7f02-45a7-adcb-258009ca9923 InstallationDate: Installed on 2014-11-14 (23 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd Bus 001 Device 004: ID 04ca:300b Lite-On Technology Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire ES1-311 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=bea9ee8a-9b50-4c65-b701-82df465b5180 ro nosplash RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/13/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.07 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Aspire ES1-311 dmi.board.vendor: Acer dmi.board.version: V1.07 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V1.07 dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.07:bd08/13/2014:svnAcer:pnAspireES1-311:pvrV1.07:rvnAcer:rnAspireES1-311:rvrV1.07:cvnAcer:ct10:cvrV1.07: dmi.product.name: Aspire ES1-311 dmi.product.version: V1.07 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400175/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1399899] Re: Screen, pointer and keyboard freeze
Henrik Tikanvaara, thank you for reporting this and helping make Ubuntu better. Could you please test the latest upstream kernel available from the very top line at the top of the page (the release names are irrelevant for testing, and please do not test the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. If the test did not allow you to test to the issue (ex. you couldn't boot into the OS) please make a comment in your report about this, and continue to test the next most recent kernel version until you can test to the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested exactly shown as: kernel-fixed-upstream-3.18-rc7 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags added: latest-bios-2501 ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1399899 Title: Screen, pointer and keyboard freeze Status in linux package in Ubuntu: Incomplete Bug description: Screen, pointer and keyboard froze for maybe 30 seconds, until was able to CTRL-Alt-F1 to console and back. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: palsa 1915 F pulseaudio CurrentDesktop: Unity Date: Sat Dec 6 13:16:04 2014 IwConfig: lono wireless extensions. p4p1 no wireless extensions. MachineType: System manufacturer System Product Name ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-25-generic root=UUID=76168cef-0db9-4114-9515-9e5f94f08eff ro splash quiet nomdmonddf nomdmonisw nomdmonddf nomdmonisw nomdmonddf nomdmonisw nomdmonddf nomdmonisw vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 RfKill: SourcePackage: linux UpgradeStatus: Upgraded to utopic on 2014-10-25 (41 days ago) dmi.bios.date: 07/21/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2501 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P8Z77-V LX dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2501:bd07/21/2014:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnP8Z77-VLX:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1399899/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1399891] Re: unable to mount iphone
Georges Bartlett, thank you for reporting this and helping make Ubuntu better. Could you please provide an uncompress/untarred log that demostrates the error message noted in the Bug Description? As well, could you please test the latest upstream kernel available from the very top line at the top of the page (the release names are irrelevant for testing, and please do not test the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. If the test did not allow you to test to the issue (ex. you couldn't boot into the OS) please make a comment in your report about this, and continue to test the next most recent kernel version until you can test to the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested exactly shown as: kernel-fixed-upstream-3.18-rc7 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags added: latest-bios-1709 ** Summary changed: - unable to mount iphone + 05ac:12a8 [Asus P7H55-M PRO] Unable to mount iPhone ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1399891 Title: 05ac:12a8 [Asus P7H55-M PRO] Unable to mount iPhone Status in linux package in Ubuntu: Incomplete Bug description: unhandled lockdown error-20 ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: georges3463 F pulseaudio /dev/snd/controlC0: georges3463 F pulseaudio CurrentDesktop: Unity Date: Sat Dec 6 04:53:23 2014 HibernationDevice: RESUME=UUID=8590fcee-2d85-4819-a78a-17de8379978f IwConfig: eth0 no wireless extensions. eth1 no wireless extensions. lono wireless extensions. MachineType: System manufacturer System Product Name ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic root=UUID=121122ce-b5e8-4819-b43b-a0e602834291 ro quiet splash RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 RfKill: SourcePackage: linux UpgradeStatus: Upgraded to utopic on 2014-10-24 (42 days ago) dmi.bios.date: 01/04/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1709 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P7H55-M PRO dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1709:bd01/04/2011:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP7H55-MPRO:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1399891/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1399999] Re: [PATCH] r8169 writes to memory not assigned to the device
** Tags added: bios-outdated-25.5 ** Tags added: cherry-pick ** Summary changed: - [PATCH] r8169 writes to memory not assigned to the device + 10ec:8168 [PATCH] r8169 writes to memory not assigned to the device ** Changed in: linux (Ubuntu) Importance: Undecided = High ** Changed in: linux (Ubuntu) Status: Confirmed = Triaged -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/139 Title: 10ec:8168 [PATCH] r8169 writes to memory not assigned to the device Status in linux package in Ubuntu: Triaged Bug description: The following applies to the 3.13 in trusty. When transferring data at = around 100Mbps, the IOMMU logs errors such as: AMD-Vi: Event logged [IO_PAGE_FAULT device=01:00.0 domain=0x001c address=0x3000 flags=0x0050] I have locally cherry-picked 7a9810e7bd99: r8169 Enable RX_MULTI_EN for RTL_GIGA_MAC_VER_40 to the Ubuntu-3.13.0-37.64 kernel and confirmed this fixes the issue for my card as well. Please consider this for backporting to the 3.13 stable tree. The hardware is: % lspci -s 01:00 -vvvn 01:00.0 0200: 10ec:8168 (rev 0c) Subsystem: 1462:7721 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 96 Region 0: I/O ports at e000 [size=256] Region 2: Memory at fea0 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at d080 (64-bit, prefetchable) [size=16K] Capabilities: access denied Kernel driver in use: r8169 --- ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 CRDA: Error: [Errno 2] No such file or directory CurrentDesktop: KDE DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=eb241518-2842-45e6-9767-0dc297ed3cbd MachineType: MSI MS-7721 Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz root=/dev/hostname/root ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 RelatedPackageVersions: linux-restricted-modules-3.13.0-39-generic N/A linux-backports-modules-3.13.0-39-generic N/A linux-firmware 1.127.10 RfKill: Tags: trusty Uname: Linux 3.13.0-39-generic x86_64 UpgradeStatus: Upgraded to trusty on 2014-05-10 (209 days ago) UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/18/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V25.3 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: A78M-E45 (MS-7721) dmi.board.vendor: MSI dmi.board.version: 5.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 5.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV25.3:bd03/18/2014:svnMSI:pnMS-7721:pvr5.0:rvnMSI:rnA78M-E45(MS-7721):rvr5.0:cvnMSI:ct3:cvr5.0: dmi.product.name: MS-7721 dmi.product.version: 5.0 dmi.sys.vendor: MSI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/139/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1400127] Re: Mellanox updates for Trusty
Eyal Perry, thanks for providing the heads up on these commits. It is greatly appreciated. ** Summary changed: - Mellanox updates for trsuty + Mellanox updates for Trusty ** Tags added: cherry-pick trusty ** Changed in: linux (Ubuntu) Importance: Undecided = High ** Changed in: linux (Ubuntu) Status: Incomplete = Triaged ** Tags added: bot-stop-nagging -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400127 Title: Mellanox updates for Trusty Status in linux package in Ubuntu: Triaged Bug description: The following changes since commit b87885d70c29324b66ee7d4f979a9f95cc46564b: UBUNTU: Ubuntu-3.13.0-42.71 (2014-12-05 14:35:11 +) are attached to this tracker as patch files. The main goal for this is patch-set is to add functionality to: 1. reduce cache misses by aligning CQE/EQE writes to the actual cache line size 2. set/get link speed using ethtool [-s]. 3. set rx/tx vlan offload 4. bug fixes all of the patches are upsream (net-next), except for the last one which is a bug fix waiting for review: https://patchwork.ozlabs.org/patch/418451/ Ido Shamay (3): net/mlx4_core: Enable CQE/EQE stride support net/mlx4_core: Cache line EQE size support net/mlx4_en: Add mlx4_en_get_cqe helper Saeed Mahameed (12): net/mlx4_core: Introduce mlx4_get_module_info for cable module info reading ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support net/mlx4_core: Introduce ACCESS_REG CMD and eth_prot_ctrl dev cap net/mlx4_core: Add ethernet backplane autoneg device capability ethtool, net/mlx4_en: Add 100M, 20G, 56G speeds ethtool reporting support net/mlx4_en: Use PTYS register to query ethtool settings net/mlx4_en: Use PTYS register to set ethtool settings (Speed) net/mlx4_en: Add support for setting rxvlan offload OFF/ON net/mlx4_en: Add ethtool support for [rx|tx]vlan offload set to OFF/ON net/mlx4_core: Prevent VF from changing port configuration net/mlx4_en: mlx4_en_set_settings() always fails when autoneg is set net/mlx4_en: ethtool force speed when asking for autoneg=off To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400127/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1400144] Re: Sound is too fast in HDMI/DisplayPort but find in Analogue Output
Geoffrey J Russell, thank you for reporting this and helping make Ubuntu better. Could you please test the latest upstream kernel available from the very top line at the top of the page (the release names are irrelevant for testing, and please do not test the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. If the test did not allow you to test to the issue (ex. you couldn't boot into the OS) please make a comment in your report about this, and continue to test the next most recent kernel version until you can test to the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested exactly shown as: kernel-fixed-upstream-3.18-rc7 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete ** Summary changed: - Sound is too fast in HDMI/DisplayPort but find in Analogue Output + Sound is too fast via HDMI port but fine using earphones -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400144 Title: Sound is too fast via HDMI port but fine using earphones Status in linux package in Ubuntu: Incomplete Bug description: Playing music through the HDMI connection to my screen speakers results in the music being much faster than it should be, but the sound is normal through the earphones ... happens in rhythmbox and banshee. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-32-generic 3.13.0-32.57 ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: geoff 1990 F pulseaudio /dev/snd/controlC0: geoff 1990 F pulseaudio CurrentDesktop: Unity Date: Mon Dec 8 07:16:55 2014 HibernationDevice: RESUME=UUID=dfa3cfb6-5d5b-4c26-bbce-fee1cbe725be InstallationDate: Installed on 2014-12-06 (1 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64+mac (20140722.2) MachineType: Shuttle Inc. XH97V ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-32-generic N/A linux-backports-modules-3.13.0-32-generic N/A linux-firmware 1.127.5 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/28/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.02 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: FH97 dmi.board.vendor: Shuttle Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.02:bd08/28/2014:svnShuttleInc.:pnXH97V:pvrV1.0:rvnShuttleInc.:rnFH97:rvr1.0:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: XH97V dmi.product.version: V1.0 dmi.sys.vendor: Shuttle Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400144/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1314198] Re: [Asus X550LC] Touchpad not Recognized in ubuntu 14.04
I'm a bit lost here ( same problem on X200MA) , how to know the touchpad model corresponding to what dmesg gives : [PNP030b:PS2K,PNP0f03:PS2M] ? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1314198 Title: [Asus X550LC] Touchpad not Recognized in ubuntu 14.04 Status in The Linux Kernel: New Status in linux package in Ubuntu: Triaged Bug description: I am facing a problem of touchpad not recognized on Asus X550LC. It notes in dmesg: i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-24-generic 3.13.0-24.46 [modified: boot/vmlinuz-3.13.0-24-generic] ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: nishu 1781 F pulseaudio /dev/snd/controlC0: nishu 1781 F pulseaudio CurrentDesktop: Unity Date: Wed Apr 30 00:03:34 2014 InstallationDate: Installed on 2014-04-29 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: ASUSTeK COMPUTER INC. X550LC ProcEnviron: LANGUAGE=en_IN:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_IN SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=5f8f534f-ba63-44e9-b334-a982524fdce1 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-24-generic N/A linux-backports-modules-3.13.0-24-generic N/A linux-firmware 1.127 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/19/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X550LC.402 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X550LC dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX550LC.402:bd11/19/2013:svnASUSTeKCOMPUTERINC.:pnX550LC:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX550LC:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X550LC dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1314198/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1396840] Re: Module nouveau systematically crashes after a few minutes, whereas module nvidia from nvidia-331-updates crashes only after several hours of work
** Attachment added: Xorg.0.log for X-freeze on graphical login with linux-3.18.0-rc7 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1396840/+attachment/4275901/+files/Xorg.linux-3.18.0-rc7.X-freeze.log -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1396840 Title: Module nouveau systematically crashes after a few minutes, whereas module nvidia from nvidia-331-updates crashes only after several hours of work Status in linux package in Ubuntu: Incomplete Bug description: Module 'nouveau' systematically crashes after a few minutes, whereas module 'nvidia' from 'nvidia-331-updates' crashes only after several hours of work. $ uname -r 3.16.0-25-generic $ dpkg-query -W 'linux-*image-*3.16.0-25*' linux-image-3.16.0-25-generic 3.16.0-25.33 linux-image-extra-3.16.0-25-generic 3.16.0-25.33 linux-signed-image-3.16.0-25-generic 3.16.0-25.33 $ lsmod | head -1 ; lsmod | grep '^nouveau' Module Size Used by nouveau 1234845 3 $ sudo lspci -nn -vv -s 03:00.0 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation C79 [GeForce 9400] [10de:0867] (rev b1) (prog-if 00 [VGA controller]) Subsystem: Apple Inc. iMac 9,1 [106b:00ad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at d200 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c000 (64-bit, prefetchable) [size=256M] Region 3: Memory at d000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at 1000 [size=128] Expansion ROM at d300 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: fee0300c Data: 4152 Kernel driver in use: nouveau ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-extra-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: urbah 3073 F pulseaudio CurrentDesktop: GNOME Date: Thu Nov 27 02:05:32 2014 HibernationDevice: RESUME=UUID=d78e46a2-825e-4ad0-8f14-c7d2935c33c7 InstallationDate: Installed on 2014-11-03 (23 days ago) InstallationMedia: Ubuntu-GNOME 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: Apple Inc. iMac9,1 ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=b587542c-4076-491a-ae4d-21942b20daf6 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/27/09 dmi.bios.vendor: Apple Inc. dmi.bios.version: IM91.88Z.008D.B08.0904271717 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: Mac-F2218FC8 dmi.board.vendor: Apple Inc. dmi.chassis.asset.tag: Asset Tag# dmi.chassis.type: 13 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-F2218FC8 dmi.modalias: dmi:bvnAppleInc.:bvrIM91.88Z.008D.B08.0904271717:bd04/27/09:svnAppleInc.:pniMac9,1:pvr1.0:rvnAppleInc.:rnMac-F2218FC8:rvr:cvnAppleInc.:ct13:cvrMac-F2218FC8: dmi.product.name: iMac9,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1396840/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1396840] Re: Module nouveau systematically crashes after a few minutes, whereas module nvidia from nvidia-331-updates crashes only after several hours of work
Thank to remote debugging through SSH, this attached 'kern.log' hopefully contains useful information for 2 separate X freezes on graphical login with module 'nouveau' from linux-3.18.0-rc7 : - From line 2415 beginning with 'Dec 7 16:23:24' to line 12681 beginning with 'Dec 7 16:35:06'. - From line 15671 beginning with 'Dec 7 23:47:53' to line 28115 beginning with 'Dec 8 00:11:56' (I set LogLevel to 1 at line 23806 beginning with 'Dec 8 00:11:28'). I have already attached the corresponding 'Xorg.0.log'. ** Attachment added: kern.log for X-freeze on graphical login with nouveau from linux-3.18.0-rc7 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1396840/+attachment/4275915/+files/kern.linux-3.18.0-rc7.nouveau.X-freeze.log -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1396840 Title: Module nouveau systematically crashes after a few minutes, whereas module nvidia from nvidia-331-updates crashes only after several hours of work Status in linux package in Ubuntu: Incomplete Bug description: Module 'nouveau' systematically crashes after a few minutes, whereas module 'nvidia' from 'nvidia-331-updates' crashes only after several hours of work. $ uname -r 3.16.0-25-generic $ dpkg-query -W 'linux-*image-*3.16.0-25*' linux-image-3.16.0-25-generic 3.16.0-25.33 linux-image-extra-3.16.0-25-generic 3.16.0-25.33 linux-signed-image-3.16.0-25-generic 3.16.0-25.33 $ lsmod | head -1 ; lsmod | grep '^nouveau' Module Size Used by nouveau 1234845 3 $ sudo lspci -nn -vv -s 03:00.0 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation C79 [GeForce 9400] [10de:0867] (rev b1) (prog-if 00 [VGA controller]) Subsystem: Apple Inc. iMac 9,1 [106b:00ad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at d200 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c000 (64-bit, prefetchable) [size=256M] Region 3: Memory at d000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at 1000 [size=128] Expansion ROM at d300 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: fee0300c Data: 4152 Kernel driver in use: nouveau ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-extra-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: urbah 3073 F pulseaudio CurrentDesktop: GNOME Date: Thu Nov 27 02:05:32 2014 HibernationDevice: RESUME=UUID=d78e46a2-825e-4ad0-8f14-c7d2935c33c7 InstallationDate: Installed on 2014-11-03 (23 days ago) InstallationMedia: Ubuntu-GNOME 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: Apple Inc. iMac9,1 ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=b587542c-4076-491a-ae4d-21942b20daf6 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/27/09 dmi.bios.vendor: Apple Inc. dmi.bios.version: IM91.88Z.008D.B08.0904271717 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: Mac-F2218FC8 dmi.board.vendor: Apple Inc. dmi.chassis.asset.tag: Asset Tag# dmi.chassis.type: 13 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-F2218FC8 dmi.modalias: dmi:bvnAppleInc.:bvrIM91.88Z.008D.B08.0904271717:bd04/27/09:svnAppleInc.:pniMac9,1:pvr1.0:rvnAppleInc.:rnMac-F2218FC8:rvr:cvnAppleInc.:ct13:cvrMac-F2218FC8: dmi.product.name: iMac9,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1396840/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1314198] Re: [Asus X550LC] Touchpad not Recognized in ubuntu 14.04
Ekimia, thank you for your comment. So your hardware and problem may be tracked, could you please file a new report with Ubuntu by executing the following in a terminal while booted into the default Ubuntu kernel (not a mainline one) via: ubuntu-bug linux For more on this, please read the official Ubuntu documentation: Ubuntu Bug Control and Ubuntu Bug Squad: https://wiki.ubuntu.com/Bugs/BestPractices#X.2BAC8-Reporting.Focus_on_One_Issue Ubuntu Kernel Team: https://wiki.ubuntu.com/KernelTeam/KernelTeamBugPolicies#Filing_Kernel_Bug_reports https://wiki.ubuntu.com/Kernel/Policies/DuplicateBugs Ubuntu Community: https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette When opening up the new report, please feel free to subscribe me to it. As well, please do not announce in this report you created a new bug report. Thank you for your understanding. Helpful bug reporting tips: https://wiki.ubuntu.com/ReportingBugs -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1314198 Title: [Asus X550LC] Touchpad not Recognized in ubuntu 14.04 Status in The Linux Kernel: New Status in linux package in Ubuntu: Triaged Bug description: I am facing a problem of touchpad not recognized on Asus X550LC. It notes in dmesg: i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-24-generic 3.13.0-24.46 [modified: boot/vmlinuz-3.13.0-24-generic] ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: nishu 1781 F pulseaudio /dev/snd/controlC0: nishu 1781 F pulseaudio CurrentDesktop: Unity Date: Wed Apr 30 00:03:34 2014 InstallationDate: Installed on 2014-04-29 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: ASUSTeK COMPUTER INC. X550LC ProcEnviron: LANGUAGE=en_IN:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_IN SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=5f8f534f-ba63-44e9-b334-a982524fdce1 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-24-generic N/A linux-backports-modules-3.13.0-24-generic N/A linux-firmware 1.127 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/19/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X550LC.402 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X550LC dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX550LC.402:bd11/19/2013:svnASUSTeKCOMPUTERINC.:pnX550LC:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX550LC:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X550LC dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1314198/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1396840] Re: Module nouveau systematically crashes after a few minutes, whereas module nvidia from nvidia-331-updates crashes only after several hours of work
Etienne URBAH, the issue you are reporting is an upstream one. Could you please report this problem through the appropriate channel by following the instructions _verbatim_ at http://nouveau.freedesktop.org/wiki/Bugs/ ? Please provide a direct URL to your bug report once you have made it so that it may be tracked. Thank you for your understanding. ** Tags removed: needs-crash-log ** Changed in: linux (Ubuntu) Status: Incomplete = Triaged ** Summary changed: - Module nouveau systematically crashes after a few minutes, whereas module nvidia from nvidia-331-updates crashes only after several hours of work + 10de:0867 [iMac9,1] Module nouveau systematically crashes after a few minutes, whereas module nvidia from nvidia-331-updates crashes only after several hours of work -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1396840 Title: 10de:0867 [iMac9,1] Module nouveau systematically crashes after a few minutes, whereas module nvidia from nvidia-331-updates crashes only after several hours of work Status in linux package in Ubuntu: Triaged Bug description: Module 'nouveau' systematically crashes after a few minutes, whereas module 'nvidia' from 'nvidia-331-updates' crashes only after several hours of work. $ uname -r 3.16.0-25-generic $ dpkg-query -W 'linux-*image-*3.16.0-25*' linux-image-3.16.0-25-generic 3.16.0-25.33 linux-image-extra-3.16.0-25-generic 3.16.0-25.33 linux-signed-image-3.16.0-25-generic 3.16.0-25.33 $ lsmod | head -1 ; lsmod | grep '^nouveau' Module Size Used by nouveau 1234845 3 $ sudo lspci -nn -vv -s 03:00.0 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation C79 [GeForce 9400] [10de:0867] (rev b1) (prog-if 00 [VGA controller]) Subsystem: Apple Inc. iMac 9,1 [106b:00ad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at d200 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c000 (64-bit, prefetchable) [size=256M] Region 3: Memory at d000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at 1000 [size=128] Expansion ROM at d300 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: fee0300c Data: 4152 Kernel driver in use: nouveau ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-extra-3.16.0-25-generic 3.16.0-25.33 ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7 Uname: Linux 3.16.0-25-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: urbah 3073 F pulseaudio CurrentDesktop: GNOME Date: Thu Nov 27 02:05:32 2014 HibernationDevice: RESUME=UUID=d78e46a2-825e-4ad0-8f14-c7d2935c33c7 InstallationDate: Installed on 2014-11-03 (23 days ago) InstallationMedia: Ubuntu-GNOME 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: Apple Inc. iMac9,1 ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed root=UUID=b587542c-4076-491a-ae4d-21942b20daf6 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-25-generic N/A linux-backports-modules-3.16.0-25-generic N/A linux-firmware 1.138 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/27/09 dmi.bios.vendor: Apple Inc. dmi.bios.version: IM91.88Z.008D.B08.0904271717 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: Mac-F2218FC8 dmi.board.vendor: Apple Inc. dmi.chassis.asset.tag: Asset Tag# dmi.chassis.type: 13 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-F2218FC8 dmi.modalias: dmi:bvnAppleInc.:bvrIM91.88Z.008D.B08.0904271717:bd04/27/09:svnAppleInc.:pniMac9,1:pvr1.0:rvnAppleInc.:rnMac-F2218FC8:rvr:cvnAppleInc.:ct13:cvrMac-F2218FC8: dmi.product.name: iMac9,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1396840/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 732243] Re: Acer Logitech, Inc. Orbicam fails to start working.
Related #1400164 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/732243 Title: Acer Logitech, Inc. Orbicam fails to start working. Status in linux package in Ubuntu: Incomplete Status in linux package in Fedora: Unknown Bug description: Problem description: Logitech, Inc. Orbicam (ID 046d:0896) doesn't work with Cheese (green led on cam doesn't light up and no images appear) unless we run Cheese multiple consecutive times. Webcam doesn't work with Skype too (no images and led turned off). This problem has started when Ubuntu 10.10 was installed (kernel 2.6.35-27-generic - 64 bits). Webcam was working at Ubuntu 10.04 (all kernel versions released until Mar-08 / 2011). Ubuntu version: Distributor ID: Ubuntu Description: Ubuntu 10.10 Release: 10.10 Codename: maverick Kernel version: Linux 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 x86_64 GNU/Linux Steps to reproduce the bug: (With Cheese) 1. run Cheese - green led on cam doesn't light up and a black screen appears instead of the image. 2. close Cheese and start it again. 3. If the cam still doesn't work, repeat step 2. (With Skype 2.1.0.81) 1. run Skype (/usr/bin/skype-wrapper) 2. Log in as a valid user. 3. At the main menu, click Options, and then click the Video tab on the left 4. Enable Skype Video. Check the box next to Enable Skype Video. 5. Open the pull-down menu of devices. Select the device (sometimes it appears as /dev/video0 and sometimes as /dev/video1). 6. Click at the Test webcam button. 7. Green led on cam doesn't light up and a black screen appears instead of the image. Expected results: Cam led lights up and image appears when Cheese is started. Cam led lights up and image appears in the web cam test at Skype. Additional info: lsusb output: Bus 005 Device 002: ID 062a:0001 Creative Labs Notebook Optical Mouse Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 017: ID 046d:0896 Logitech, Inc. OrbiCam Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub /var/log/messages when I tried to run Cheese four times and the cam worked only at the last (fourth) attempt: Mar 9 17:04:26 aspire kernel: [ 6472.857266] usb 1-4: USB disconnect, address 17 Mar 9 17:04:26 aspire kernel: [ 6472.857342] gspca: video0 disconnect Mar 9 17:04:27 aspire kernel: [ 6474.512285] gspca: set alt 0 err -19 Mar 9 17:04:27 aspire kernel: [ 6474.512294] gspca: usb_submit_urb alt 7 err -19 Mar 9 17:04:28 aspire kernel: [ 6474.790146] usb 1-4: new high speed USB device using ehci_hcd and address 18 Mar 9 17:04:28 aspire kernel: [ 6474.969126] gspca: probing 046d:0896 Mar 9 17:04:28 aspire kernel: [ 6474.969133] vc032x: Sensor PO Mar 9 17:04:28 aspire kernel: [ 6474.971180] gspca: video1 created Mar 9 17:04:36 aspire kernel: [ 6482.628464] gspca: video0 released Mar 9 17:06:51 aspire kernel: [ 6618.082332] usb 1-4: USB disconnect, address 18 Mar 9 17:06:51 aspire kernel: [ 6618.082410] gspca: video1 disconnect Mar 9 17:06:53 aspire kernel: [ 6619.742700] gspca: set alt 0 err -19 Mar 9 17:06:53 aspire kernel: [ 6619.742710] gspca: usb_submit_urb alt 7 err -19 Mar 9 17:06:53 aspire kernel: [ 6620.020143] usb 1-4: new high speed USB device using ehci_hcd and address 19 Mar 9 17:06:53 aspire kernel: [ 6620.209951] gspca: probing 046d:0896 Mar 9 17:06:53 aspire kernel: [ 6620.209958] vc032x: Sensor PO Mar 9 17:06:53 aspire kernel: [ 6620.214951] gspca: video0 created Mar 9 17:07:31 aspire kernel: [ 6657.839792] gspca: video1 released Mar 9 17:07:44 aspire kernel: [ 6670.992411] usb 1-4: USB disconnect, address 19 Mar 9 17:07:44 aspire kernel: [ 6670.992481] gspca: video0 disconnect Mar 9 17:07:46 aspire kernel: [ 6672.650173] gspca: set alt 0 err -19 Mar 9 17:07:46 aspire kernel: [ 6672.650183] gspca: usb_submit_urb alt 7 err -19 Mar 9 17:07:46 aspire kernel: [ 6672.932615] usb 1-4: new high speed USB device using ehci_hcd and address 20 Mar 9 17:07:46 aspire kernel: [ 6673.105526] gspca: probing 046d:0896 Mar 9 17:07:46 aspire kernel: [ 6673.105533] vc032x: Sensor PO Mar 9 17:07:46 aspire kernel: [ 6673.107520] gspca: video1 created Mar 9 17:07:51 aspire kernel: [ 6678.155567] gspca: video0 released v4l-info /dev/video0 output open /dev/video0: No such file or directory v4l-info /dev/video1 output ### v4l2 device info [/dev/video1] ### general info VIDIOC_QUERYCAP driver : vc032x card: Camera bus_info:
[Kernel-packages] [Bug 1378897] Re: [Medion E122X] suspend/resume failure
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378897 Title: [Medion E122X] suspend/resume failure Status in linux package in Ubuntu: Expired Bug description: System unable to resume from suspension ProblemType: KernelOops DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-21-generic 3.16.0-21.28 ProcVersionSignature: Ubuntu 3.16.0-21.28-generic 3.16.4 Uname: Linux 3.16.0-21-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.14.7-0ubuntu5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: fred 1993 F pulseaudio Date: Wed Oct 8 17:30:18 2014 DuplicateSignature: suspend/resume:Medion E122X:H90ME302 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=db87ce07-e5ac-448c-8b43-12d7c376dcb4 InstallationDate: Installed on 2014-10-07 (0 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Alpha amd64 (20140923) InterpreterPath: /usr/bin/python3.4 MachineType: Medion E122X ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-21-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-21-generic N/A linux-backports-modules-3.16.0-21-generic N/A linux-firmware 1.134 SourcePackage: linux Title: [hostname E122X] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 12/27/2010 dmi.bios.vendor: H90MB dmi.bios.version: H90ME302 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: E122X dmi.board.vendor: Medion dmi.board.version: Rev 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 10 dmi.chassis.vendor: Medion dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnH90MB:bvrH90ME302:bd12/27/2010:svnMedion:pnE122X:pvr:rvnMedion:rnE122X:rvrRev1.0:cvnMedion:ct10:cvrToBeFilledByO.E.M.: dmi.product.name: E122X dmi.sys.vendor: Medion To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1378897/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1365672] Re: A recent firmware update made ath9k_htc card cause kernel panic/freeze
[Expired for linux-firmware (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux-firmware (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1365672 Title: A recent firmware update made ath9k_htc card cause kernel panic/freeze Status in linux-firmware package in Ubuntu: Expired Bug description: Today there was an update to the linux-firmware package. This apparently changed the firmware used by the ath9k_htc driver required by my wifi dongle. Now if the dongle is plugged in, my computer freezes and if it is plugge don before boot, the computer freezes in the login screen. After careful analysis of the syslogs it can be seen that the hard drive got remounted as readonly meaning that the kernel had a fatal error occur in some driver. I am currently using the linux 3.17 vanilla kernel that is in development and teh linux-firmware package that comes in standard with ubuntu trusty tahr. I am sure teh issue lies with the firmware since the same kernel has been running for a few days without issues before the firmware got updated . To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1365672/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1329384] Re: [Dell PowerEdge R220] 12.04/14.04 Ubuntu Server 32 bit installer does not boot without acpi=off
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1329384 Title: [Dell PowerEdge R220] 12.04/14.04 Ubuntu Server 32 bit installer does not boot without acpi=off Status in linux package in Ubuntu: Expired Bug description: Trying to install Ubuntu Server on a brand new Dell R220 (released 2 months ago). Tested multiple installers all from USB: - Ubuntu Server 12.04.4 LTS (i686) without any option: kernel panic - Ubuntu Server 14.04.4 LTS (i686) without any option: kernel panic - Ubuntu Server 12.04.4 LTS (amd64) without any option: works as expected (GOOD) The files attached are for a 12.04.4 (latest available as 6/6/14) installation. Kernel panic happened into acpi_ex_system_memory_space_handler. Tried some options: - acpi=ht: kernel panic - pci=noacpi: kernel panic WORKAROUND: Utilize kernel boot parameter: acpi=off --- AcpiTables: AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-23-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: VX222e0 [Digigram VX222e [PCM #0]], device 0: pcxhr 0 [pcxhr 0] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/controlC0', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'VX222e0'/'Digigram VX222e at 0xa2b0 0x3000, 0x3100 irq 16 [PCM #0]' Mixer name : '' Components : '' Controls : 21 Simple ctrls : 9 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=9d0e0f11-a9a8-4c8a-b400-87ee5920a8af InstallationMedia: Ubuntu-Server 12.04.4 LTS Precise Pangolin - Release i386 (20140606) MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_US: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-23-generic root=UUID=1858ce80-926f-480a-b4be-99adca525779 ro quiet acpi=off ProcVersionSignature: Ubuntu 3.11.0-23.40~precise1-generic 3.11.10.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-23-generic N/A linux-backports-modules-3.11.0-23-generic N/A linux-firmware 1.79.14 RfKill: Error: [Errno 2] No such file or directory Tags: precise Uname: Linux 3.11.0-23-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 04/02/2014 dmi.bios.version: 1.0.3 dmi.board.version: A00 dmi.chassis.type: 23 dmi.chassis.version: 01 dmi.modalias: dmi:bvn:bvr1.0.3:bd04/02/2014:svn:pn:pvr01:rvn:rn:rvrA00:cvn:ct23:cvr01: dmi.product.version: 01 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1329384/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1378741] Re: BUG: soft lockup - CPU#0 stuck for 22s! [kworker/0:2:184]
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378741 Title: BUG: soft lockup - CPU#0 stuck for 22s! [kworker/0:2:184] Status in linux package in Ubuntu: Expired Bug description: I simply resumed my VM, no clue about any cause of the issue ProblemType: KernelOops DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-20-generic 3.16.0-20.27 ProcVersionSignature: Ubuntu 3.16.0-20.27-generic 3.16.3 Uname: Linux 3.16.0-20-generic x86_64 Annotation: Your system might become unstablenow and might need to be restarted. ApportVersion: 2.14.7-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: giedoterol 2583 F pulseaudio Date: Tue Oct 7 14:47:15 2014 DuplicateSignature: BUG: soft lockup - CPU#0 stuck for 22s! [kworker/0:2:184] RIP: 0010:location location vmballoon_work+0x61b/0x7dc [vmw_balloon] Failure: oops HibernationDevice: RESUME=UUID=0f20e969-d464-4daa-85ac-1f49fc618444 InstallationDate: Installed on 2014-09-29 (8 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Alpha amd64 (20140923) IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: VMware, Inc. VMware Virtual Platform ProcFB: 0 svgadrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-20-generic root=UUID=27cde770-4494-4ac5-837d-e5f4c06451ad ro find_preseed=/preseed.cfg auto noprompt priority=critical locale=en_US quiet PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-3ubuntu8 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux Title: BUG: soft lockup - CPU#0 stuck for 22s! [kworker/0:2:184] UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/31/2013 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd07/31/2013:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1378741/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1374948] Re: BUG: soft lockup - CPU#1 stuck for 22s! [Xorg:1839]
This kernel http://kernel.ubuntu.com/~jsalisbury/lp1374948 with bug. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1374948 Title: BUG: soft lockup - CPU#1 stuck for 22s! [Xorg:1839] Status in linux package in Ubuntu: Triaged Bug description: Ubuntu 14.10 slow runing, slow rebooting, slow working. ProblemType: KernelOops DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-18-generic 3.16.0-18.25 ProcVersionSignature: Ubuntu 3.16.0-18.25-generic 3.16.3 Uname: Linux 3.16.0-18-generic x86_64 Annotation: Your system might become unstablenow and might need to be restarted. ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: alenka 2796 F pulseaudio /dev/snd/controlC0: alenka 2796 F pulseaudio Date: Sun Sep 28 08:37:44 2014 DuplicateSignature: BUG: soft lockup - CPU#1 stuck for 22s! [Xorg:1839] RIP: 0010:location location ttm_dma_unpopulate+0x79/0x380 [ttm] Failure: oops HibernationDevice: RESUME=UUID=60c4391d-b68f-4f82-acb6-96e4086cd266 InstallationDate: Installed on 2012-09-02 (755 days ago) InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release amd64 (20120823.1) MachineType: Hewlett-Packard HP Pavilion g6 Notebook PC ProcFB: 0 radeondrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-18-generic root=UUID=7adacb1d-cf9c-4a0c-81b9-9ff248938c36 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-3ubuntu8 SourcePackage: linux Title: BUG: soft lockup - CPU#1 stuck for 22s! [Xorg:1839] UpgradeStatus: Upgraded to utopic on 2014-09-25 (2 days ago) dmi.bios.date: 08/18/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.33 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3567 dmi.board.vendor: Hewlett-Packard dmi.board.version: 21.27 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnHewlett-Packard:bvrF.33:bd08/18/2011:svnHewlett-Packard:pnHPPaviliong6NotebookPC:pvr0696120046160:rvnHewlett-Packard:rn3567:rvr21.27:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion g6 Notebook PC dmi.product.version: 0696120046160 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1374948/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1378631] Re: BUG: Bad page map in process postgres pte:02000000 pmd:30b4f9067
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378631 Title: BUG: Bad page map in process postgres pte:0200 pmd:30b4f9067 Status in linux package in Ubuntu: Expired Bug description: The problem occurs during bootup ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-36-generic 3.13.0-36.63 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 Uname: Linux 3.13.0-36-generic x86_64 NonfreeKernelModules: nvidia Annotation: Your system might become unstable now and might need to be restarted. ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: vivek 3380 F pulseaudio /dev/snd/controlC0: vivek 3380 F pulseaudio Date: Tue Sep 30 19:15:40 2014 Failure: oops HibernationDevice: RESUME=UUID=9050a93d-5986-46b3-8e64-a8d4b3ba1965 InstallationDate: Installed on 2011-02-15 (1330 days ago) InstallationMedia: Ubuntu-Server 10.10 Maverick Meerkat - Release amd64 (20101007) IwConfig: eth1 no wireless extensions. lono wireless extensions. MachineType: Dell Inc. XPS 8300 ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=9e058c03-dccd-4733-8975-49e2adc31ffe ro quiet PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-3ubuntu8 RfKill: SourcePackage: linux Title: BUG: Bad page map in process postgres pte:0200 pmd:30b4f9067 UpgradeStatus: Upgraded to trusty on 2014-09-20 (17 days ago) WifiSyslog: dmi.bios.date: 02/15/2011 dmi.bios.vendor: Dell Inc. dmi.bios.version: A03 dmi.board.name: 0Y2MRG dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA03:bd02/15/2011:svnDellInc.:pnXPS8300:pvr:rvnDellInc.:rn0Y2MRG:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: XPS 8300 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1378631/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1400044] Re: Acer E1-572 bluetooth not working on 14.04 kernel 3.13
Hello Christopher, BIOS updated to 2.17. Same problem on 14.04/3.13. On Windows (dual-boot machine) bluetooth works and connects. Now my 'how to report a bug' problem is only more compicated due to your comment: ...so posting this on the old BIOS would not be helpful. As well, you don't have to create a new bug report. Do you want me to create another bug report or provide more information in this bug report? Thank you for your time and effort. Kind regards, Patrick -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400044 Title: Acer E1-572 bluetooth not working on 14.04 kernel 3.13 Status in linux package in Ubuntu: Incomplete Bug description: On 14.04 with kernel 3.13 my bluetooth does not work. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-40-generic 3.13.0-40.69 ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10 Uname: Linux 3.13.0-40-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: zuijle 2628 F pulseaudio /dev/snd/pcmC1D0p: zuijle 2628 F...m pulseaudio /dev/snd/controlC0: zuijle 2628 F pulseaudio CurrentDesktop: Unity Date: Sun Dec 7 10:16:15 2014 HibernationDevice: RESUME=UUID=3191ba14-d48e-42a4-a86f-7cb2ebae5569 InstallationDate: Installed on 2014-07-18 (141 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Acer Aspire E1-572 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=eea14111-5ac6-4bae-86a1-d7c8185b8dc6 ro quiet splash acpi_osi=Linux acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-40-generic N/A linux-backports-modules-3.13.0-40-generic N/A linux-firmware 1.127.10 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: dmi.bios.date: 11/21/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.13 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.13:bd11/21/2013:svnAcer:pnAspireE1-572:pvrV2.13:rvnAcer:rnEA50_HW:rvrV2.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400044/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1387922] Re: Problem resuming from suspend after update to 3.13.0-39-generic
Well, I got nowhere by tracing it backwards. In the meanwhile, the linux-image-generic-lts-utopic pacakage has appeared and it solves my problem. I guess this bug report can be closed now. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1387922 Title: Problem resuming from suspend after update to 3.13.0-39-generic Status in linux package in Ubuntu: Incomplete Bug description: I have to push the power button twice to resume from suspend. On the first push, the computer wakes up and then immediately goes back to sleep. It actually wakes up and gives me the login screen on the second push. This problem started after the last kernel update and subsequent reboot. Please let me know if any additional information is needed. Thanks. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-39-generic 3.13.0-39.66 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: rehan 4179 F pulseaudio /dev/snd/controlC0: rehan 4179 F pulseaudio CurrentDesktop: Unity Date: Thu Oct 30 19:27:29 2014 HibernationDevice: RESUME=UUID=796bfa06-20c4-4486-b4b3-6ea3ed8e0a7b InstallationDate: Installed on 2012-11-12 (717 days ago) InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120328) MachineType: To be filled by O.E.M. To be filled by O.E.M. ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic root=UUID=6cbf5176-699e-40cd-8119-3e1802a1e70a ro quiet splash RelatedPackageVersions: linux-restricted-modules-3.13.0-39-generic N/A linux-backports-modules-3.13.0-39-generic N/A linux-firmware 1.127.7 RfKill: 1: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-18 (195 days ago) dmi.bios.date: 04/07/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2501 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: M5A99FX PRO R2.0 dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2501:bd04/07/2014:svnTobefilledbyO.E.M.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnASUSTeKCOMPUTERINC.:rnM5A99FXPROR2.0:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: To be filled by O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1387922/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1400144] Re: Sound is too fast via HDMI port but fine using earphones
I just upgraded my kernel and the problem is fixed. Linux jess 3.13.0-40-generic #69-Ubuntu SMP Thu Nov 13 17:53:56 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux I've added the tag ... kernel-fixed-upstream-3.13.0-40-generic ... I hope that's okay ** Tags added: kernel-fixed-upstream-3.13.0-40-generic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400144 Title: Sound is too fast via HDMI port but fine using earphones Status in linux package in Ubuntu: Incomplete Bug description: Playing music through the HDMI connection to my screen speakers results in the music being much faster than it should be, but the sound is normal through the earphones ... happens in rhythmbox and banshee. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-32-generic 3.13.0-32.57 ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: geoff 1990 F pulseaudio /dev/snd/controlC0: geoff 1990 F pulseaudio CurrentDesktop: Unity Date: Mon Dec 8 07:16:55 2014 HibernationDevice: RESUME=UUID=dfa3cfb6-5d5b-4c26-bbce-fee1cbe725be InstallationDate: Installed on 2014-12-06 (1 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64+mac (20140722.2) MachineType: Shuttle Inc. XH97V ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-32-generic N/A linux-backports-modules-3.13.0-32-generic N/A linux-firmware 1.127.5 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/28/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.02 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: FH97 dmi.board.vendor: Shuttle Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.02:bd08/28/2014:svnShuttleInc.:pnXH97V:pvrV1.0:rvnShuttleInc.:rnFH97:rvr1.0:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: XH97V dmi.product.version: V1.0 dmi.sys.vendor: Shuttle Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400144/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1387922] Re: Problem resuming from suspend after update to 3.13.0-39-generic
Rehan Khamaruddin, this bug report is being closed due to your last comment https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1387922/comments/22 regarding this being fixed with an update. For future reference you can manage the status of your own bugs by clicking on the current status in the yellow line and then choosing a new status in the revealed drop down box. You can learn more about bug statuses at https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time to report this bug and helping to make Ubuntu better. Please submit any future bugs you may find. ** Changed in: linux (Ubuntu) Status: Incomplete = Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1387922 Title: Problem resuming from suspend after update to 3.13.0-39-generic Status in linux package in Ubuntu: Invalid Bug description: I have to push the power button twice to resume from suspend. On the first push, the computer wakes up and then immediately goes back to sleep. It actually wakes up and gives me the login screen on the second push. This problem started after the last kernel update and subsequent reboot. Please let me know if any additional information is needed. Thanks. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-39-generic 3.13.0-39.66 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: rehan 4179 F pulseaudio /dev/snd/controlC0: rehan 4179 F pulseaudio CurrentDesktop: Unity Date: Thu Oct 30 19:27:29 2014 HibernationDevice: RESUME=UUID=796bfa06-20c4-4486-b4b3-6ea3ed8e0a7b InstallationDate: Installed on 2012-11-12 (717 days ago) InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120328) MachineType: To be filled by O.E.M. To be filled by O.E.M. ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic root=UUID=6cbf5176-699e-40cd-8119-3e1802a1e70a ro quiet splash RelatedPackageVersions: linux-restricted-modules-3.13.0-39-generic N/A linux-backports-modules-3.13.0-39-generic N/A linux-firmware 1.127.7 RfKill: 1: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-18 (195 days ago) dmi.bios.date: 04/07/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2501 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: M5A99FX PRO R2.0 dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2501:bd04/07/2014:svnTobefilledbyO.E.M.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnASUSTeKCOMPUTERINC.:rnM5A99FXPROR2.0:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: To be filled by O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1387922/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1400044] Re: Acer E1-572 bluetooth not working on 14.04 kernel 3.13
PvZ: Could you please both specify what happened, and provide the output of the following terminal command: sudo dmidecode -s bios-version sudo dmidecode -s bios-release-date -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400044 Title: Acer E1-572 bluetooth not working on 14.04 kernel 3.13 Status in linux package in Ubuntu: Incomplete Bug description: On 14.04 with kernel 3.13 my bluetooth does not work. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-40-generic 3.13.0-40.69 ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10 Uname: Linux 3.13.0-40-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: zuijle 2628 F pulseaudio /dev/snd/pcmC1D0p: zuijle 2628 F...m pulseaudio /dev/snd/controlC0: zuijle 2628 F pulseaudio CurrentDesktop: Unity Date: Sun Dec 7 10:16:15 2014 HibernationDevice: RESUME=UUID=3191ba14-d48e-42a4-a86f-7cb2ebae5569 InstallationDate: Installed on 2014-07-18 (141 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Acer Aspire E1-572 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=eea14111-5ac6-4bae-86a1-d7c8185b8dc6 ro quiet splash acpi_osi=Linux acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-40-generic N/A linux-backports-modules-3.13.0-40-generic N/A linux-firmware 1.127.10 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: dmi.bios.date: 11/21/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.13 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.13:bd11/21/2013:svnAcer:pnAspireE1-572:pvrV2.13:rvnAcer:rnEA50_HW:rvrV2.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400044/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1400144] Re: Sound is too fast via HDMI port but fine using earphones
Geoffrey J Russell, this bug report is being closed due to your last comment https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400144/comments/4 regarding this being fixed with an update. For future reference you can manage the status of your own bugs by clicking on the current status in the yellow line and then choosing a new status in the revealed drop down box. You can learn more about bug statuses at https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time to report this bug and helping to make Ubuntu better. Please submit any future bugs you may find. ** Changed in: linux (Ubuntu) Status: Incomplete = Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1400144 Title: Sound is too fast via HDMI port but fine using earphones Status in linux package in Ubuntu: Invalid Bug description: Playing music through the HDMI connection to my screen speakers results in the music being much faster than it should be, but the sound is normal through the earphones ... happens in rhythmbox and banshee. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-32-generic 3.13.0-32.57 ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: geoff 1990 F pulseaudio /dev/snd/controlC0: geoff 1990 F pulseaudio CurrentDesktop: Unity Date: Mon Dec 8 07:16:55 2014 HibernationDevice: RESUME=UUID=dfa3cfb6-5d5b-4c26-bbce-fee1cbe725be InstallationDate: Installed on 2014-12-06 (1 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64+mac (20140722.2) MachineType: Shuttle Inc. XH97V ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-32-generic N/A linux-backports-modules-3.13.0-32-generic N/A linux-firmware 1.127.5 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/28/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.02 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: FH97 dmi.board.vendor: Shuttle Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.02:bd08/28/2014:svnShuttleInc.:pnXH97V:pvrV1.0:rvnShuttleInc.:rnFH97:rvr1.0:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: XH97V dmi.product.version: V1.0 dmi.sys.vendor: Shuttle Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400144/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp