[Kernel-packages] [Bug 1770849] Comment bridged from LTC Bugzilla
--- Comment From ppaid...@in.ibm.com 2018-06-21 01:37 EDT--- (In reply to comment #21) > > @pridhiviraj Hello Pridhiviraj, can this issue be closed now? Yes, this is tested with 4.15.0-24-generic kernel. So we can close the issue. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1770849 Title: Ubuntu 18.04 kernel crashed while in degraded mode Status in The Ubuntu-power-systems project: Fix Released Status in linux package in Ubuntu: Fix Released Status in linux source package in Bionic: Fix Released Bug description: == SRU Justification == IBM reports a kernel crash with Bionic while in degraded mode(Degraded cores). IBM created a patch to resolve this bug and has submitted it upstream: https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-May/172835.html The patch has not landed in mainline as of yet, so it is being submitted as a SAUCE patch. == Fix == UBUNTU: SAUCE: powerpc/perf: Fix memory allocation for core-imc based on num_possible_cpus() == Regression Potential == Low. Limited to powerpc. == Test Case == A test kernel was built with this patch and tested by the original bug reporter. The bug reporter states the test kernel resolved the bug. kernel crash The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes [ 64.713154] kexec_core: Starting new kernel [ 156.281504630,5] OPAL: Switch to big-endian OS [ 158.440263459,5] OPAL: Switch to little-endian OS [1.889211] Unable to handle kernel paging request for data at address 0x678e549df9e2878c [1.889289] Faulting instruction address: 0xc038aa30 [1.889344] Oops: Kernel access of bad area, sig: 11 [#1] [1.889386] LE SMP NR_CPUS=2048 NUMA PowerNV [1.889432] Modules linked in: [1.889468] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-20-generic #21-Ubuntu [1.889545] NIP: c038aa30 LR: c038aa1c CTR: [1.889608] REGS: c03fed193840 TRAP: 0380 Not tainted (4.15.0-20-generic) [1.889670] MSR: 90009033 CR: 28000884 XER: 2004 [1.889742] CFAR: c0016e1c SOFTE: 1 [1.889742] GPR00: c038a914 c03fed193ac0 c16eae00 0001 [1.889742] GPR04: c03fd754c7f8 002c 0001 002b [1.889742] GPR08: 678e549df9e28874 fffe [1.889742] GPR12: 28000888 cfa82100 c000d3b8 [1.889742] GPR16: [1.889742] GPR20: a78e54a22eb64f8c [1.889742] GPR24: c03fd754c800 678e549df9e2878c 0300 c02bd05c [1.889742] GPR28: c03fed01ea00 014080c0 c03fd754c800 c03fed01ea00 [1.890286] NIP [c038aa30] kmem_cache_alloc_trace+0x2d0/0x330 [1.890340] LR [c038aa1c] kmem_cache_alloc_trace+0x2bc/0x330 [1.890391] Call Trace: [1.890416] [c03fed193ac0] [c038a914] kmem_cache_alloc_trace+0x1b4/0x330 (unreliable) [1.890491] [c03fed193b30] [c02bd05c] pmu_dev_alloc+0x3c/0x170 [1.890547] [c03fed193bb0] [c10e3210] perf_event_sysfs_init+0x8c/0xf0 [1.890611] [c03fed193c40] [c000d144] do_one_initcall+0x64/0x1d0 [1.890676] [c03fed193d00] [c10b4400] kernel_init_freeable+0x280/0x374 [1.890740] [c03fed193dc0] [c000d3d4] kernel_init+0x24/0x160 [1.890795] [c03fed193e30] [c000b528] ret_from_kernel_thread+0x5c/0xb4 [1.890857] Instruction dump: [1.890909] 7c97ba78 fb210038 38a50001 7f19ba78 fb29 f8aa 4bc8c3f1 6000 [1.890978] 7fb8b840 419e0028 e93f0022 e91f0140 <7d59482a> 7d394a14 7d4a4278 7fa95040 [1.891050] ---[ end trace 41b3fe7a827f3888 ]--- [2.900027] [3.900175] Kernel panic - not syncing: Attempted to kill init! exitcode=0x000b [3.900175] [4.71868[ 175.340944355,5] OPAL: Reboot request... 2] Rebooting in 10 seconds.. This fix is needed to resolve the crash https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-May/172835.html To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-power-systems/+bug/1770849/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1777850] Re: Redpine: Observed kernel panic while running soft-ap tests
** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed ** Changed in: linux (Ubuntu) Importance: Undecided => Critical -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1777850 Title: Redpine: Observed kernel panic while running soft-ap tests Status in linux package in Ubuntu: Confirmed Bug description: SRU Justification: -- Impact: Kernel freezes/panic when running wireless tests for soft-ap Test case: 1. Create a soft-ap upon reboot. 2. Install Checkbox plano and : $ sudo snap install --devmode checkbox-plano 3. Run below wifi-ap test case $ checkbox-plano.checkbox-cli run .*device .*wireless/caracalla-wifi_ap_.*wlan0_auto 4. Upon 3-4 iteraions, observed kernel crash as below, [ 718.83244] BUG: unable to handle page request at 001067e38 [ 718.83248] IP: cfg80211_scan_done+0xb0/0xc0 [cfg80211] [ 718.83971] __ieee80211_scan_completed+0xb1/0x390 [mac80211] [ 718.84078] ieee80211_scan_work+0x7e/0x480 [mac80211] [ 718.84098] process_one_work+0x142/0x3d0 [ 718.84111] worker_thread+0x229/0x440 [ 718.84122] kthread+0xf5/0x130 [ 718.84132] ? process_one_work+0x3d0/0x3d0 [ 718.84140] ? kthread_associate_blkcg+0x90/0x90 [ 718.84152] ret_from_fork+0x35/0x40 Fix: scan work function keeps running even after cancel_hw_scan() call. Issue is resolved by calling cancel_work_sync() in rsi_mac80211_stop(). Regression Petential: Ran Step 3 in 30-times. Didn't see any kernel panic. This bug is for tracking purposes only, please don't triage. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1777850/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1777858] Re: Redpine: Observed kernel panic while running wireless regressions tests
** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed ** Changed in: linux (Ubuntu) Importance: Undecided => Critical -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1777858 Title: Redpine: Observed kernel panic while running wireless regressions tests Status in linux package in Ubuntu: Confirmed Bug description: SRU Justification: -- Impact: Kernel freezes/panic when running wireless tests Test case: 1. Create a wireless soft-ap/station upon reboot. 2. Install Checkbox plano and : $ sudo snap install --devmode checkbox-plano 3. Run below wifi-ap test case $ checkbox-plano.checkbox-cli run .*device .*wireless/caracalla-wifi_ap_.*wlan0_auto 4. Upon 3-4 iteraions, observed kernel crash as below, BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] exit_creds+0x1f/0x50 PGD 0 Oops: 0002 [#1] SMP CPU: 0 PID: 6502 Comm: rmmod Tainted: G OE 4.4.0-128-generic #154-Ubuntu Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.00 04/17/2017 Stack: 88007392e600 880075847dc0 8108160a 88007392e600 880075847de8 810a484b 880076127000 88003cd3a800 880074f12a00 880075847e28 c09bed15 Call Trace: [] __put_task_struct+0x5a/0x140 [] kthread_stop+0x10b/0x110 [] rsi_disconnect+0x2f5/0x300 [ven_rsi_sdio] [] ? __pm_runtime_resume+0x5b/0x80 [] sdio_bus_remove+0x38/0x100 [] __device_release_driver+0xa4/0x150 [] driver_detach+0xb5/0xc0 [] bus_remove_driver+0x55/0xd0 [] driver_unregister+0x2c/0x50 [] sdio_unregister_driver+0x1a/0x20 [] rsi_module_exit+0x15/0x30 [ven_rsi_sdio] [] SyS_delete_module+0x1b8/0x210 [] entry_SYSCALL_64_fastpath+0x1c/0xbb Fix: kthread_stop() is taking care of wait_for_completion() by default. No need of taking care separately. Issue is resolved by removing wait_for_completion() from rsi_disconnect(). Regression Petential: Ran Step 3 in 30-times. Didn't see any kernel panic. This bug is for tracking purposes only, please don't triage. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1777858/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1775316] Re: add_key04 in LTP syscall test cause kernel oops (NULL pointer dereference) with T kernel
add_key04 test passed with the proposed Trusty kernel. <<>> tag=add_key04 stime=1529400599 cmdline="add_key04" contacts="" analysis=exit <<>> tst_test.c:1015: INFO: Timeout per run is 0h 05m 00s add_key04.c:80: PASS: didn't crash while filling keyring Summary: passed 1 failed 0 skipped 0 warnings 0 <<>> initiation_status="ok" duration=0 termination_type=exited termination_id=0 corefile=no cutime=0 cstime=1 <<>> ** Tags removed: verification-needed-trusty ** Tags added: verification-done-trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1775316 Title: add_key04 in LTP syscall test cause kernel oops (NULL pointer dereference) with T kernel Status in ubuntu-kernel-tests: In Progress Status in linux package in Ubuntu: Fix Released Status in linux source package in Trusty: Fix Committed Bug description: [SRU Justification] The assoc_array_insert_into_terminal_node function in lib/assoc_array.c in the Linux kernel before 4.13.11 mishandles node splitting, which allows local users to cause a denial of service (NULL pointer dereference and panic) via a crafted application, as demonstrated by the keyring key type, and key addition and link creation operations. The "add_key04" from the LTP syscall tests will cause kernel oops on a testing node with Trusty kernel installed. And it will make incoming ssh connection hang (bug 1775158) [Test Case] This issue can easily be reproduced with the "add_key04" test from the LTP syscall test suite. Steps (with root): 1. sudo apt-get install git -y 2. git clone --depth=1 https://github.com/linux-test-project/ltp.git 3. cd ltp 4. make autotools 5. ./configure 6. make; make install 7. /opt/ltp/testcases/bin/add_key04 Test result before the patch: ubuntu@amaura:/opt/ltp/testcases/bin$ sudo ./add_key04 tst_test.c:1015: INFO: Timeout per run is 0h 05m 00s add_key04.c:82: FAIL: kernel oops while filling keyring Summary: passed 0 failed 1 skipped 0 warnings 0 [52399.298894] BUG: unable to handle kernel NULL pointer dereference at 0010 [52399.298918] IP: [] assoc_array_apply_edit+0x67/0x110 [52399.298938] PGD 800455a3a067 PUD 45725f067 PMD 0 [52399.298952] Oops: 0002 [#1] SMP [52399.298963] Modules linked in: cfg80211 ib_iser rdma_cm iw_cm ib_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi dm_crypt joydev hid_generic x86_pkg_temp_thermal coretemp kvm_intel kvm usbhid hid lpc_ich shpchp mac_hid crct10dif_pclmul crc32_pclmul i915_bdw ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper igb cryptd ahci dca ptp libahci pps_core intel_ips i2c_algo_bit drm_kms_helper video drm [52399.299100] CPU: 7 PID: 9559 Comm: add_key04 Not tainted 3.13.0-149-generic #199-Ubuntu [52399.299118] Hardware name: Intel Corporation S1200RP/S1200RP, BIOS S1200RP.86B.03.02.0003.070120151022 07/01/2015 [52399.299142] task: 880457b43000 ti: 88045a2e2000 task.ti: 88045a2e2000 [52399.299159] RIP: 0010:[] [] assoc_array_apply_edit+0x67/0x110 [52399.299182] RSP: 0018:88045a2e3df0 EFLAGS: 00010202 [52399.299194] RAX: 0010 RBX: 88045a2e3e78 RCX: [52399.299211] RDX: 88045a1d1741 RSI: 880456028880 RDI: 880456028800 [52399.299228] RBP: 88045a2e3df0 R08: 00016880 R09: 812dba97 [52399.299244] R10: 880460803c00 R11: ddf32900 R12: 880456f7f680 [52399.299261] R13: 88045a1d09c0 R14: R15: [52399.299278] FS: 7ff43fc39740() GS:8804704e() knlGS: [52399.299297] CS: 0010 DS: ES: CR0: 80050033 [52399.299311] CR2: 0010 CR3: 00045514c000 CR4: 00360770 [52399.299328] DR0: DR1: DR2: [52399.299344] DR3: DR6: fffe0ff0 DR7: 0400 [52399.299361] Stack: [52399.299366] 88045a2e3e08 812d7a33 88045a2e3e50 [52399.299387] 812d57a7 88045a1d0a30 88045a2e3e78 880456f7f681 [52399.299407] 3f01 880456f7f380 88045a1d09c0 880457b43000 [52399.299427] Call Trace: [52399.299436] [] __key_link+0x33/0x40 [52399.299450] [] __key_instantiate_and_link+0x87/0xf0 [52399.299467] [] key_create_or_update+0x32e/0x420 [52399.299482] [] SyS_add_key+0x110/0x210 [52399.299497] [] ? schedule_tail+0x5c/0xb0 [52399.299512] [] system_call_fastpath+0x1a/0x1f [52399.299526] Code: 48 85 d2 74 0a 48 8b 8f e8 00 00 00 48 89 0a 48 83 c0 08 48 39 f0 75 e4 48 8b 87 00 01 00 00 48 85 c0 74 0a 48 8b 97 08 01 00 00 <48> 89 10 48 8b 87 10 01 00 00 48 85 c0 74 0a 48 8b 97 18 01 00 [52399.299625] RIP []
[Kernel-packages] [Bug 1774950] Re: Suspend fails in Ubuntu and Kubuntu 18.04 but works fine in Ubuntu and Kubuntu 17.10 (and on Kubuntu 18.04 using kernel 4.14.47)
Do you have swap file or swap partitions? Newer systemd is required for swapfile, see LP: #1760106. Try "systemd/237-3ubuntu10.1" in bionic-proposed. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1774950 Title: Suspend fails in Ubuntu and Kubuntu 18.04 but works fine in Ubuntu and Kubuntu 17.10 (and on Kubuntu 18.04 using kernel 4.14.47) Status in linux package in Ubuntu: Confirmed Bug description: I have installed Kubuntu 18.04 on 3 different machines (my friend's and my own) with no suspend problems but my HP Pavilion 11 x360 does not suspend. It suspends fine with Ubuntu 17.10, Kubuntu 17.10, Devuan Jesse, Devuan ASCII and Windows 10 but fails with Ubuntu 18.04 and Kubuntu 18.04. I have also tried suspend using a live USB of 18.04 on this machine and it fails in the same way, so does not appear to be caused by any additional programs that I had installed. By installing an older kernel (4.14) on Kubuntu 18.04 the suspend function works as expected. Running Kubuntu 18.04 with kernels 4.15, 4.16, 4.17 results in the suspend failure that freezes the machine and requires a hard reset. Correct behaviour is - Screen goes blank, fan goes off, power LED flashes to show machine is in suspend. Pressing power button triggers 'resume' function. What happens - Screen goes blank, fan stays on, power LED stays on. Machine stays in this state and does not respond to any keyboard interaction, mouse movement or power button presses. Ctrl + Alt + f1 (or f2, f3, f4 etc) does not get any response. The only way to use the machine is to shut down by holding down the power button. Checking the logs suggests that the machine believes it is in suspend mode sleep [deep] when it isn't. Having to hard reset to get any response means that the kernel logs say no more than sleep [deep] pm-suspend also results in the same problems with kernels 4.15 and 4.16, but works fine with 4.14. It is curious that a machine that suspends fine on an earlier 4.14 kernel no longer works with 4.15 and above, whilst 3 other machines (including one with pretty similar hardware) do not exhibit this problem. There are only a handful of questions about it on the forums but at least 3 other people have the same problem: https://askubuntu.com/questions/1029405/ubuntu-18-04-crashes-on- resuming-from-suspend https://askubuntu.com/questions/1041369/after-upgrading- from-17-10-ubuntu-18-04-wont-sleep-suspend I am attempting to round up anyone else with the same issue and point them to this bug report. My laptop is HP Pavilion x360 11-n013na Matalaks is Acer Aspire ES1-511 collisionTwo has XPS 9560 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1774950/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1774394] Re: fcntl35 / fcntl35_64 in LTP syscall test failed with T/X/X-LTS kernel
This test has passed on X-LTS in this cycle. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1774394 Title: fcntl35 / fcntl35_64 in LTP syscall test failed with T/X/X-LTS kernel Status in ubuntu-kernel-tests: New Status in linux package in Ubuntu: Incomplete Status in linux-lts-xenial package in Ubuntu: New Bug description: The "fcntl35" and "fcntl35_64" from the LTP syscall tests have failed on a testing node with X-LTS i386 kernel installed (they were not tested on amd64/arm64 because the test was not ready when the SRU starts). <>> tag=fcntl35 stime=1527764565 cmdline="fcntl35" contacts="" analysis=exit <<>> tst_test.c:1015: INFO: Timeout per run is 0h 05m 00s fcntl35.c:98: FAIL: an unprivileged user init the capacity of a pipe to 65536 unexpectedly, expected 4096 fcntl35.c:101: PASS: a privileged user init the capacity of a pipe to 65536 successfully Summary: passed 1 failed 1 skipped 0 warnings 0 <<>> initiation_status="ok" duration=0 termination_type=exited termination_id=1 corefile=no cutime=0 cstime=0 <<>> <<>> tag=fcntl35_64 stime=1527764565 cmdline="fcntl35_64" contacts="" analysis=exit <<>> tst_test.c:1015: INFO: Timeout per run is 0h 05m 00s fcntl35.c:98: FAIL: an unprivileged user init the capacity of a pipe to 65536 unexpectedly, expected 4096 fcntl35.c:101: PASS: a privileged user init the capacity of a pipe to 65536 successfully Summary: passed 1 failed 1 skipped 0 warnings 0 <<>> initiation_status="ok" duration=0 termination_type=exited termination_id=1 corefile=no cutime=0 cstime=0 <<>> ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-4.4.0-128-generic 4.4.0-128.154~14.04.1 ProcVersionSignature: User Name 4.4.0-128.154~14.04.1-generic 4.4.131 Uname: Linux 4.4.0-128-generic i686 ApportVersion: 2.14.1-0ubuntu3.28 Architecture: i386 Date: Thu May 31 11:05:58 2018 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: linux-lts-xenial UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1774394/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1777338] Re: Linux 4.15.0-23 crashes during the boot process with a "Unable to handle kernel NULL pointer dereference" message
Also a good idea to update the BIOS. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1777338 Title: Linux 4.15.0-23 crashes during the boot process with a "Unable to handle kernel NULL pointer dereference" message Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: In Progress Bug description: I went to boot my computer today and it wouldn't boot. I get an "Unable to handle kernel NULL pointer dereference" message during the boot process, and, a bit after that, a message from the kernel watchdog about CPU #0 being stuck. Then the boot process stops completely. I was able to boot the system by telling Grub to load 4.15.0-22, which works perfectly fine, so there has been a regression. I am running Ubuntu as a Xen dom0, if that matters. I haven't tried booting the offending kernel version without Xen. I'm not sure where, if anywhere, these messages go on disk, for posting. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-image-4.15.0-23-generic 4.15.0-23.25 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Uname: Linux 4.15.0-22-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.9-0ubuntu7.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sun Jun 17 10:12:58 2018 InstallationDate: Installed on 2017-08-06 (314 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: linux-signed UpgradeStatus: Upgraded to bionic on 2018-05-29 (19 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1777338/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1574439] Re: [Dell XPS 13 9350] Touchpad stops working, pointer sometimes disappears
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1574439 Title: [Dell XPS 13 9350] Touchpad stops working, pointer sometimes disappears Status in linux package in Ubuntu: Expired Bug description: The touchpad will sporadically stop (touchscreen is fine). Sometimes the pointer freezes, sometimes it disappears. New in Xenial. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-21-generic 4.4.0-21.37 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: john 4431 F pulseaudio Date: Mon Apr 25 00:28:45 2016 HibernationDevice: RESUME=UUID=781ccc96-0573-4aaa-9382-a7e00c5b88c3 InstallationDate: Installed on 2016-02-18 (66 days ago) InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0bda:5682 Realtek Semiconductor Corp. Bus 001 Device 003: ID 04f3:20d0 Elan Microelectronics Corp. Bus 001 Device 002: ID 8087:0a2a Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. XPS 13 9350 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.4.0-21-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash crashkernel=384M-:128M crashkernel=384M-:128M vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.4.0-21-generic N/A linux-backports-modules-4.4.0-21-generic N/A linux-firmware1.157 SourcePackage: linux SystemImageInfo: Error: command ['system-image-cli', '-i'] failed with exit code 2: UpgradeStatus: Upgraded to xenial on 2016-04-23 (1 days ago) dmi.bios.date: 11/27/2015 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.1.7 dmi.board.name: 0VM5NC dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.1.7:bd11/27/2015:svnDellInc.:pnXPS139350:pvr:rvnDellInc.:rn0VM5NC:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: XPS 13 9350 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1574439/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1746340] Re: Samsung SSD corruption (fsck needed)
No the user uses an XPS 9560. I think remove io_queue_depth parameter should be safe. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1746340 Title: Samsung SSD corruption (fsck needed) Status in linux package in Ubuntu: Confirmed Bug description: Ubuntu 4.13.0-21.24-generic 4.13.13 I have a Razer Blade Stealth 2016. The first Ubuntu I installed was Ubuntu 17.04, which gave me this error after 2 weeks of usage. After that, I installed 16.04 and used it for MONTHS without any problems, until it produced the same error this week. I think it has to do with the ubuntu updates, because I did one recently and one today, just before this problem. Could be a coincidence though. I notice the error when I try to save something on disk and it says me that the disk is in read-only mode: lz@lz:/var/log$ touch something touch: cannot touch 'something': Read-only file system lz@lz:/var/log$ cat syslog Jan 29 01:07:39 lz kernel: [62984.375393] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 lz@lz:/var/log$ dmesg [62984.375393] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.377374] Aborting journal on device nvme0n1p2-8. [62984.379343] EXT4-fs (nvme0n1p2): Remounting filesystem read-only [62984.379516] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.381486] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.383484] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.385469] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.387278] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.389262] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.391252] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.393341] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [63285.618078] audit: type=1400 audit(1517195560.393:63): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=22495 comm="cupsd" capability=12 capname="net_admin" Rebooting the ubuntu will give me a black terminal where I can run fsck /dev/nvm30n1p2 (something like that) and it fill fix a lot of orphaned inodes. The majority of time it boots back to the Ubuntu working good, but some times it boots to a broken ubuntu (no images, lots of things broken). I have to reinstall ubuntu then. Every time I reinstall my Ubuntu, I have to try lots of times until it installs without an Input/Output error. When it installs, I can use it for some hours without having the problem, but if I run the software updates, it ALWAYS crashes and enters in read-only mode, specifically in the part that is installing kernel updates. I noticed that Ubuntu installs updates automatically when they're for security reasons. Could this be the reason my Ubuntu worked for months without the problem, but then an update was applied and it broke? I thought that this bug was happening: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678184 and tried different nvme_core.default_ps_max_latency_us= combinations, all them gave errors. I just changed to 0 and I had no error while using ubuntu (however I didn't test for a long time) but I still had the error after trying to update my ubuntu. My Samsung 512gb SSD is: SAMSUNG MZVLW512HMJP-0, FW REV: CXY7501Q on a Razer Blade Stealth. I also asked this on ask ubuntu, without success: https://askubuntu.com/questions/998471/razer-blade-stealth-disk- corruption-fsck-needed-probably-samsung-ssd-bug-afte Please help me, as I need this computer to work on lots of things :c --- ApportVersion: 2.20.7-0ubuntu3.7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lz 1088 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 17.10 InstallationDate: Installed on 2018-01-30 (0 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) MachineType: Razer Blade Stealth Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-21-generic.efi.signed
[Kernel-packages] [Bug 1764866] Re: [123779.594327] general protection fault: 0000 [#1] SMP PTI
[Expired for linux (Ubuntu Bionic) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu Bionic) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1764866 Title: [123779.594327] general protection fault: [#1] SMP PTI Status in linux package in Ubuntu: Expired Status in linux source package in Bionic: Expired Bug description: Ubuntu 18.04 beta, clean install, updates twice a day. Loaded updates this afternoon, no reboot required. Closed the laptop, went home and opened it. Some issues winth networking so decided te restart. That didn't finish well so had to force a power cycle. Booted well, but got this error report. Machine is a Dell Latitude 3540 (early 2014). If you need more information just let me know. cheers Tom ProblemType: KernelOops DistroRelease: Ubuntu 18.04 Package: linux-image-4.15.0-15-generic 4.15.0-15.16 ProcVersionSignature: Ubuntu 4.15.0-15.16-generic 4.15.15 Uname: Linux 4.15.0-15-generic x86_64 Annotation: Your system might become unstable now and might need to be restarted. ApportVersion: 2.20.9-0ubuntu5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1184 F pulseaudio thomas 1495 F pulseaudio Date: Tue Apr 17 18:41:18 2018 Failure: oops HibernationDevice: RESUME=UUID=8be4eddb-bbc0-427f-89b0-35a54564b33a InstallationDate: Installed on 2018-04-14 (2 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180407) MachineType: Dell Inc. Latitude 3540 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-15-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: kerneloops-daemon N/A SourcePackage: linux Title: [123779.594327] general protection fault: [#1] SMP PTI UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/17/2014 dmi.bios.vendor: Dell Inc. dmi.bios.version: A06 dmi.board.name: 02RKKX dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A06 dmi.modalias: dmi:bvnDellInc.:bvrA06:bd04/17/2014:svnDellInc.:pnLatitude3540:pvrA06:rvnDellInc.:rn02RKKX:rvrA00:cvnDellInc.:ct8:cvrA06: dmi.product.name: Latitude 3540 dmi.product.version: A06 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1764866/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1764866] Re: [123779.594327] general protection fault: 0000 [#1] SMP PTI
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1764866 Title: [123779.594327] general protection fault: [#1] SMP PTI Status in linux package in Ubuntu: Expired Status in linux source package in Bionic: Expired Bug description: Ubuntu 18.04 beta, clean install, updates twice a day. Loaded updates this afternoon, no reboot required. Closed the laptop, went home and opened it. Some issues winth networking so decided te restart. That didn't finish well so had to force a power cycle. Booted well, but got this error report. Machine is a Dell Latitude 3540 (early 2014). If you need more information just let me know. cheers Tom ProblemType: KernelOops DistroRelease: Ubuntu 18.04 Package: linux-image-4.15.0-15-generic 4.15.0-15.16 ProcVersionSignature: Ubuntu 4.15.0-15.16-generic 4.15.15 Uname: Linux 4.15.0-15-generic x86_64 Annotation: Your system might become unstable now and might need to be restarted. ApportVersion: 2.20.9-0ubuntu5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1184 F pulseaudio thomas 1495 F pulseaudio Date: Tue Apr 17 18:41:18 2018 Failure: oops HibernationDevice: RESUME=UUID=8be4eddb-bbc0-427f-89b0-35a54564b33a InstallationDate: Installed on 2018-04-14 (2 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180407) MachineType: Dell Inc. Latitude 3540 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-15-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: kerneloops-daemon N/A SourcePackage: linux Title: [123779.594327] general protection fault: [#1] SMP PTI UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/17/2014 dmi.bios.vendor: Dell Inc. dmi.bios.version: A06 dmi.board.name: 02RKKX dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A06 dmi.modalias: dmi:bvnDellInc.:bvrA06:bd04/17/2014:svnDellInc.:pnLatitude3540:pvrA06:rvnDellInc.:rn02RKKX:rvrA00:cvnDellInc.:ct8:cvrA06: dmi.product.name: Latitude 3540 dmi.product.version: A06 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1764866/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1772081] Re: HP x360 - Ryzen 2500U Locks up
Is there a "Typical Idle Current" option in your BIOS? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1772081 Title: HP x360 - Ryzen 2500U Locks up Status in linux package in Ubuntu: Incomplete Bug description: Hi, I have an HP x360 Ryzen 2500u. It locks up a couple of times a day. Before I disabled C6, using this python script https://github.com/r4m0n/ZenStates-Linux it would lock up minutes after boot. --- ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: stu3022 F pulseaudio /dev/snd/controlC0: stu3022 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-04-19 (32 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Beta amd64 (20180404) MachineType: HP HP ENVY x360 Convertible 15-bq1xx Package: linux (not installed) ProcFB: 0 amdgpudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=5fbe26ec-88dd-4b0f-8e57-c577efacffc7 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 StagingDrivers: r8822be Tags: bionic staging Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip docker kvm libvirt lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/26/2018 dmi.bios.vendor: AMI dmi.bios.version: F.16 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 83C6 dmi.board.vendor: HP dmi.board.version: 63.18 dmi.chassis.type: 31 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAMI:bvrF.16:bd01/26/2018:svnHP:pnHPENVYx360Convertible15-bq1xx:pvr:rvnHP:rn83C6:rvr63.18:cvnHP:ct31:cvrChassisVersion: dmi.product.family: 103C_5335KV HP Envy dmi.product.name: HP ENVY x360 Convertible 15-bq1xx dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1772081/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1754759] Re: LAN connection keeps connecting and disconnecting in an infinite loop
Please try latest mainline kernel (v4.18-rc1). -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1754759 Title: LAN connection keeps connecting and disconnecting in an infinite loop Status in linux package in Ubuntu: Invalid Bug description: With Xubuntu 17.10 the following problem occurs on a Lenovo X230 Laptop: - Boot from live-ISO - Click on network icon in title bar and edit LAN-connection - Change MTU from Auto to 1492 - Connect LAN cable => LAN network keeps connecting and disconnecting in an infinite loop (No wireless network is configured.) The error did not occur on Xubuntu 16.04. The same situation occurs with Xubuntu installed on the SSD. I took the ISO for this bug report, in order to exclude wrong settings on the installed system. WORKAROUND: Don't adjust the MTU. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: network-manager 1.8.4-1ubuntu3 ProcVersionSignature: Ubuntu 4.13.0-21.24-generic 4.13.13 Uname: Linux 4.13.0-21-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.7 Architecture: amd64 CasperVersion: 1.387 CurrentDesktop: XFCE Date: Fri Mar 9 20:26:21 2018 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IpRoute: default via 10.110.120.1 dev enp0s25 proto static metric 100 10.110.120.0/24 dev enp0s25 proto kernel scope link src 10.110.120.57 metric 100 169.254.0.0/16 dev enp0s25 scope link metric 1000 LiveMediaBuild: Xubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAMEUUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT AUTOCONNECT-PRIORITY READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH SLAVE Wired connection 1 db135360-f229-3472-bd3a-eb8d6bc8b601 802-3-ethernet 1520627169 Fr 09 Mär 2018 20:26:09 UTC yes 4294966297no /org/freedesktop/NetworkManager/Settings/1 yes enp0s25 activated /org/freedesktop/NetworkManager/ActiveConnection/32 -- nmcli-dev: DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH enp0s25 ethernet connected /org/freedesktop/NetworkManager/Devices/2 Wired connection 1 db135360-f229-3472-bd3a-eb8d6bc8b601 /org/freedesktop/NetworkManager/ActiveConnection/32 wlp3s0 wifi disconnected /org/freedesktop/NetworkManager/Devices/3 -- ---- lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/1 -- ---- nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.8.4connected started full enabled enabled enabled enabled enabled --- ApportVersion: 2.20.7-0ubuntu3.7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xubuntu3822 F pulseaudio CasperVersion: 1.387 DistroRelease: Ubuntu 17.10 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IpRoute: default via 10.110.120.1 dev enp0s25 proto static metric 100 10.110.120.0/24 dev enp0s25 proto kernel scope link src 10.110.120.57 metric 100 169.254.0.0/16 dev enp0s25 scope link metric 1000 LiveMediaBuild: Xubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105) MachineType: LENOVO 2333B15 Package: network-manager 1.8.4-1ubuntu3 PackageArchitecture: amd64 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet splash --- maybe-ubiquity ProcVersionSignature: Ubuntu 4.13.0-21.24-generic 4.13.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.13.0-21-generic N/A linux-backports-modules-4.13.0-21-generic N/A linux-firmware 1.169.1 Tags: artful Uname: Linux 4.13.0-21-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 04/19/2017 dmi.bios.vendor: LENOVO dmi.bios.version: G2ETA8WW (2.68 )
[Kernel-packages] [Bug 1746340] Re: Samsung SSD corruption (fsck needed)
Should I take nvme.io_queue_depth=64 out? I didn't experience the problem again yet, just right after the first boot with the new kernel. However I still experience the error inside the VMs. I'm adding nvme-core.default_ps_max_latency_us=1500 now. Is this an user of Razer Blade Stealth? Would be good to talk to him to see if he experiences the problems inside VMs, which is very annoying as I do everything in them. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1746340 Title: Samsung SSD corruption (fsck needed) Status in linux package in Ubuntu: Confirmed Bug description: Ubuntu 4.13.0-21.24-generic 4.13.13 I have a Razer Blade Stealth 2016. The first Ubuntu I installed was Ubuntu 17.04, which gave me this error after 2 weeks of usage. After that, I installed 16.04 and used it for MONTHS without any problems, until it produced the same error this week. I think it has to do with the ubuntu updates, because I did one recently and one today, just before this problem. Could be a coincidence though. I notice the error when I try to save something on disk and it says me that the disk is in read-only mode: lz@lz:/var/log$ touch something touch: cannot touch 'something': Read-only file system lz@lz:/var/log$ cat syslog Jan 29 01:07:39 lz kernel: [62984.375393] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 lz@lz:/var/log$ dmesg [62984.375393] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.377374] Aborting journal on device nvme0n1p2-8. [62984.379343] EXT4-fs (nvme0n1p2): Remounting filesystem read-only [62984.379516] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.381486] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.383484] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.385469] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.387278] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.389262] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.391252] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.393341] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [63285.618078] audit: type=1400 audit(1517195560.393:63): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=22495 comm="cupsd" capability=12 capname="net_admin" Rebooting the ubuntu will give me a black terminal where I can run fsck /dev/nvm30n1p2 (something like that) and it fill fix a lot of orphaned inodes. The majority of time it boots back to the Ubuntu working good, but some times it boots to a broken ubuntu (no images, lots of things broken). I have to reinstall ubuntu then. Every time I reinstall my Ubuntu, I have to try lots of times until it installs without an Input/Output error. When it installs, I can use it for some hours without having the problem, but if I run the software updates, it ALWAYS crashes and enters in read-only mode, specifically in the part that is installing kernel updates. I noticed that Ubuntu installs updates automatically when they're for security reasons. Could this be the reason my Ubuntu worked for months without the problem, but then an update was applied and it broke? I thought that this bug was happening: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678184 and tried different nvme_core.default_ps_max_latency_us= combinations, all them gave errors. I just changed to 0 and I had no error while using ubuntu (however I didn't test for a long time) but I still had the error after trying to update my ubuntu. My Samsung 512gb SSD is: SAMSUNG MZVLW512HMJP-0, FW REV: CXY7501Q on a Razer Blade Stealth. I also asked this on ask ubuntu, without success: https://askubuntu.com/questions/998471/razer-blade-stealth-disk- corruption-fsck-needed-probably-samsung-ssd-bug-afte Please help me, as I need this computer to work on lots of things :c --- ApportVersion: 2.20.7-0ubuntu3.7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lz 1088 F pulseaudio CurrentDesktop: ubuntu:GNOME
[Kernel-packages] [Bug 1742675] Re: after upgrade to linux-image-extra-4.13.0-26-generic the system does not start at all
Maybe try the -hwe-edge kernel instead? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1742675 Title: after upgrade to linux-image-extra-4.13.0-26-generic the system does not start at all Status in linux package in Ubuntu: Confirmed Bug description: After upgrade to linux-image-extra-4.13.0-26-generic the system does not start at all. Only restart through Advanced Options with linux-image-extra-4.10.0-42-generic helps. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubuntu-release-upgrader-core 1:16.04.23 ProcVersionSignature: Ubuntu 4.10.0-42.46~16.04.1-generic 4.10.17 Uname: Linux 4.10.0-42-generic i686 ApportVersion: 2.20.1-0ubuntu2.15 Architecture: i386 CrashDB: ubuntu CurrentDesktop: Unity Date: Thu Jan 11 15:20:26 2018 InstallationDate: Installed on 2017-06-23 (201 days ago) InstallationMedia: Ubuntu 16.04.2 LTS "Xenial Xerus" - Release i386 (20170215.2) PackageArchitecture: all SourcePackage: ubuntu-release-upgrader Symptom: release-upgrade UpgradeStatus: No upgrade log present (probably fresh install) mtime.conffile..etc.update-manager.release-upgrades: 2017-06-24T18:05:02.372991 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1742675/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1746340] Re: Samsung SSD corruption (fsck needed)
So the ASPM is indeed disabled: LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ Can yo try disabling the deepest power state under this kernel? i.e. use "nvme-core.default_ps_max_latency_us=1500". -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1746340 Title: Samsung SSD corruption (fsck needed) Status in linux package in Ubuntu: Confirmed Bug description: Ubuntu 4.13.0-21.24-generic 4.13.13 I have a Razer Blade Stealth 2016. The first Ubuntu I installed was Ubuntu 17.04, which gave me this error after 2 weeks of usage. After that, I installed 16.04 and used it for MONTHS without any problems, until it produced the same error this week. I think it has to do with the ubuntu updates, because I did one recently and one today, just before this problem. Could be a coincidence though. I notice the error when I try to save something on disk and it says me that the disk is in read-only mode: lz@lz:/var/log$ touch something touch: cannot touch 'something': Read-only file system lz@lz:/var/log$ cat syslog Jan 29 01:07:39 lz kernel: [62984.375393] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 lz@lz:/var/log$ dmesg [62984.375393] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.377374] Aborting journal on device nvme0n1p2-8. [62984.379343] EXT4-fs (nvme0n1p2): Remounting filesystem read-only [62984.379516] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.381486] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.383484] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.385469] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.387278] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.389262] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.391252] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.393341] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [63285.618078] audit: type=1400 audit(1517195560.393:63): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=22495 comm="cupsd" capability=12 capname="net_admin" Rebooting the ubuntu will give me a black terminal where I can run fsck /dev/nvm30n1p2 (something like that) and it fill fix a lot of orphaned inodes. The majority of time it boots back to the Ubuntu working good, but some times it boots to a broken ubuntu (no images, lots of things broken). I have to reinstall ubuntu then. Every time I reinstall my Ubuntu, I have to try lots of times until it installs without an Input/Output error. When it installs, I can use it for some hours without having the problem, but if I run the software updates, it ALWAYS crashes and enters in read-only mode, specifically in the part that is installing kernel updates. I noticed that Ubuntu installs updates automatically when they're for security reasons. Could this be the reason my Ubuntu worked for months without the problem, but then an update was applied and it broke? I thought that this bug was happening: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678184 and tried different nvme_core.default_ps_max_latency_us= combinations, all them gave errors. I just changed to 0 and I had no error while using ubuntu (however I didn't test for a long time) but I still had the error after trying to update my ubuntu. My Samsung 512gb SSD is: SAMSUNG MZVLW512HMJP-0, FW REV: CXY7501Q on a Razer Blade Stealth. I also asked this on ask ubuntu, without success: https://askubuntu.com/questions/998471/razer-blade-stealth-disk- corruption-fsck-needed-probably-samsung-ssd-bug-afte Please help me, as I need this computer to work on lots of things :c --- ApportVersion: 2.20.7-0ubuntu3.7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lz 1088 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 17.10 InstallationDate: Installed on 2018-01-30 (0 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) MachineType: Razer Blade
[Kernel-packages] [Bug 1773993] Re: Mouse cursor having a longer trail, lagging and stuttering
Please try v4.18-rc1. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1773993 Title: Mouse cursor having a longer trail, lagging and stuttering Status in linux package in Ubuntu: Confirmed Bug description: Xubuntu 16.04.4, Kernel: 4.13.0-44 x86_64, CPU: i3-4030U, Graphics: Intel HD 4400. After kernel 4.13.0-40, my mouse cursor started to have a bigger trail then before, lagging and stutter during some load. During loading redhift mouse experience more lag. On a kernel 4.13.0-39 and 4.13.0-41 all good. I've tried to test on a various kernels and here are the results: Xubuntu 16.04.4, Kernel 4.13.0-39 = Good Xubuntu 16.04.4, Kernel 4.13.0-40 = Bad Xubuntu 16.04.4, Kernel 4.13.0-41 = Good Xubuntu 16.04.4, Kernel 4.13.0-42 = Bad Xubuntu 16.04.4, Kernel 4.13.0-43 = Bad Xubuntu 16.04.4, Kernel 4.13.0-44 = Bad Xubuntu 16.04.4, Kernel 4.15.18(Ubuntu mainline) = Bad Xubuntu 16.04.4, Kernel 4.16.4(Ubuntu mainline) = Bad Ubuntu 18.04, Kernel 4.15 = Bad Xubuntu 18.04, Kernel 4.16.10(Ubuntu mainline) = Bad Xubuntu 18.04, Kernel 4.16.11(Ubuntu mainline) = Bad Xubuntu 18.04, Kernel 4.16.12(Ubuntu mainline) = Bad Fedora 28, Kernel 4.16.3 = Bad OpenSuse Tumbleweed, Kernel 4.16.8 = Good Manjaro 17.1.9 KDE, Kernel 4.9.96 = Good Manjaro 17.1.9 KDE, Kernel 4.14.36 = Good Manjaro 17.1.9 KDE, Kernel 4.16.4 = Good Manjaro 17.1.9 KDE, Kernel 4.17.0-1 = Good Please request any information and tests that may help. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.13.0-44-generic 4.13.0-44.49~16.04.1 ProcVersionSignature: Ubuntu 4.13.0-44.49~16.04.1-generic 4.13.16 Uname: Linux 4.13.0-44-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.17 Architecture: amd64 CurrentDesktop: XFCE Date: Tue May 29 17:03:15 2018 InstallationDate: Installed on 2017-07-23 (310 days ago) InstallationMedia: Xubuntu 16.04.2 LTS "Xenial Xerus" - Beta amd64 (20170723) SourcePackage: linux-hwe UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.20.1-0ubuntu2.17 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: user 2320 F...m pulseaudio /dev/snd/controlC1: user 2320 F pulseaudio /dev/snd/controlC0: user 2320 F pulseaudio CurrentDesktop: XFCE DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=d969d8ec-87e0-493c-b317-4e68535c1b21 InstallationDate: Installed on 2017-07-23 (310 days ago) InstallationMedia: Xubuntu 16.04.2 LTS "Xenial Xerus" - Beta amd64 (20170723) MachineType: Hewlett-Packard HP Pavilion 14 Notebook PC Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-44-generic.efi.signed root=UUID=2bf2a7b1-cc88-4a21-aaca-251f52e78964 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 4.13.0-44.49~16.04.1-generic 4.13.16 RelatedPackageVersions: linux-restricted-modules-4.13.0-44-generic N/A linux-backports-modules-4.13.0-44-generic N/A linux-firmware 1.157.19 RfKill: 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no Tags: xenial Uname: Linux 4.13.0-44-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 03/18/2015 dmi.bios.vendor: Insyde dmi.bios.version: F.42 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 227D dmi.board.vendor: Hewlett-Packard dmi.board.version: 77.35 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.42:bd03/18/2015:svnHewlett-Packard:pnHPPavilion14NotebookPC:pvr097510405F1620180:rvnHewlett-Packard:rn227D:rvr77.35:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP S=PAV X=Null dmi.product.name: HP Pavilion 14 Notebook PC dmi.product.version: 097510405F1620180 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1773993/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1746340] Re: Samsung SSD corruption (fsck needed)
FWIW there's another user says that disabling ASPM fixes this issue for him. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1746340 Title: Samsung SSD corruption (fsck needed) Status in linux package in Ubuntu: Confirmed Bug description: Ubuntu 4.13.0-21.24-generic 4.13.13 I have a Razer Blade Stealth 2016. The first Ubuntu I installed was Ubuntu 17.04, which gave me this error after 2 weeks of usage. After that, I installed 16.04 and used it for MONTHS without any problems, until it produced the same error this week. I think it has to do with the ubuntu updates, because I did one recently and one today, just before this problem. Could be a coincidence though. I notice the error when I try to save something on disk and it says me that the disk is in read-only mode: lz@lz:/var/log$ touch something touch: cannot touch 'something': Read-only file system lz@lz:/var/log$ cat syslog Jan 29 01:07:39 lz kernel: [62984.375393] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 lz@lz:/var/log$ dmesg [62984.375393] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.377374] Aborting journal on device nvme0n1p2-8. [62984.379343] EXT4-fs (nvme0n1p2): Remounting filesystem read-only [62984.379516] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.381486] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.383484] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.385469] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.387278] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.389262] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.391252] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [62984.393341] EXT4-fs error (device nvme0n1p2): ext4_find_entry:1442: inode #26607929: comm updatedb.mlocat: checksumming directory block 0 [63285.618078] audit: type=1400 audit(1517195560.393:63): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=22495 comm="cupsd" capability=12 capname="net_admin" Rebooting the ubuntu will give me a black terminal where I can run fsck /dev/nvm30n1p2 (something like that) and it fill fix a lot of orphaned inodes. The majority of time it boots back to the Ubuntu working good, but some times it boots to a broken ubuntu (no images, lots of things broken). I have to reinstall ubuntu then. Every time I reinstall my Ubuntu, I have to try lots of times until it installs without an Input/Output error. When it installs, I can use it for some hours without having the problem, but if I run the software updates, it ALWAYS crashes and enters in read-only mode, specifically in the part that is installing kernel updates. I noticed that Ubuntu installs updates automatically when they're for security reasons. Could this be the reason my Ubuntu worked for months without the problem, but then an update was applied and it broke? I thought that this bug was happening: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678184 and tried different nvme_core.default_ps_max_latency_us= combinations, all them gave errors. I just changed to 0 and I had no error while using ubuntu (however I didn't test for a long time) but I still had the error after trying to update my ubuntu. My Samsung 512gb SSD is: SAMSUNG MZVLW512HMJP-0, FW REV: CXY7501Q on a Razer Blade Stealth. I also asked this on ask ubuntu, without success: https://askubuntu.com/questions/998471/razer-blade-stealth-disk- corruption-fsck-needed-probably-samsung-ssd-bug-afte Please help me, as I need this computer to work on lots of things :c --- ApportVersion: 2.20.7-0ubuntu3.7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lz 1088 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 17.10 InstallationDate: Installed on 2018-01-30 (0 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) MachineType: Razer Blade Stealth Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-21-generic.efi.signed
[Kernel-packages] [Bug 1776076] Re: package virtualbox-dkms 5.2.10-dfsg-6 failed to install/upgrade: installed virtualbox-dkms package post-installation script subprocess was killed by signal (Killed)
This has happened to me a couple times, I dont have a clear answer how to fix it yet, but the dkms install hangs waiting for input at the secure-boot update screen, but it seems to open in different tty so I end up having to kill the process to regain control of the terminal. You can see virtualbox-dkms getting stuck easily if you look at the process tree. I'll try to attach more useful information after my next attempt. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to dkms in Ubuntu. https://bugs.launchpad.net/bugs/1776076 Title: package virtualbox-dkms 5.2.10-dfsg-6 failed to install/upgrade: installed virtualbox-dkms package post-installation script subprocess was killed by signal (Killed) Status in dkms package in Ubuntu: Confirmed Bug description: virtualbox installation getting stuck ProblemType: Package DistroRelease: Ubuntu 18.04 Package: virtualbox-dkms 5.2.10-dfsg-6 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 Date: Sun Jun 10 19:11:06 2018 ErrorMessage: installed virtualbox-dkms package post-installation script subprocess was killed by signal (Killed) InstallationDate: Installed on 2018-06-10 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) PackageArchitecture: all Python3Details: /usr/bin/python3.6, Python 3.6.5, python3-minimal, 3.6.5-3 PythonDetails: /usr/bin/python2.7, Python 2.7.15rc1, python-minimal, 2.7.15~rc1-1 RelatedPackageVersions: dpkg 1.19.0.5ubuntu2 apt 1.6.1 SourcePackage: virtualbox Title: package virtualbox-dkms 5.2.10-dfsg-6 failed to install/upgrade: installed virtualbox-dkms package post-installation script subprocess was killed by signal (Killed) UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dkms/+bug/1776076/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1775717] Re: CPU/GPU Fans suddenly go 100% RPM on Asus ROG G752VT
The Package C-State stays at PC2, which causes lots of heat. It should be able
to hit PC8.
C2 (pc2); 58.3%
C3 (pc3); 0.0%
C6 (pc6); 0.0%
C7 (pc7); 0.0%
C8 (pc8); 0.0%
C9 (pc9); 0.0%
C10 (pc10); 0.0%
Please follow these steps:
- Intall r8168-dkms and reboot
- Use kernel parameter "pcie_aspm=force"
- Run this as root "echo powersave > /sys/module/pcie_aspm/parameters/policy"
- Run "powertop --auto-tune"
- Check the C-State in powertop
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1775717
Title:
CPU/GPU Fans suddenly go 100% RPM on Asus ROG G752VT
Status in linux package in Ubuntu:
Incomplete
Bug description:
After upgrading from Ubuntu 16.04 to 18.04, I've noticed that CPU and
GPU fans suddenly go full throttle. It doesn't seem to depend on
temperature, could happen when 32 °C reported, sometimes the laptop
can work for day or two without this issue, but eventually it happens.
The only way to stop fans is to power off the laptop, power on (fans
go 100% at this point again), power off during BIOS splash screen and
power on again. Seems to happen more often after waking up from a
sleep.
Things tried:
Upgrading BIOS to latest available on ASUS site to the date of
writing. No change.
asus-fan kernel module (https://github.com/daringer/asus-fan). Detects
both fans and shows correct speed in /sys/class/hwmon/*/fan{1,2}*, but
does not seem to control it and does not prevent going full throttle.
4.17.0 kernel from Ubuntu mainline builds. Doesn't seem to affect the
issue.
Userspace fan control software (https://github.com/hirschmann/nbfc).
Can control speed of both fans to the point where they go full
throttle, after that has no effect on them.
---
ProblemType: Bug
ApportVersion: 2.20.9-0ubuntu7.2
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1: whale 3068 F pulseaudio
/dev/snd/controlC0: whale 3068 F pulseaudio
CurrentDesktop: ubuntu:GNOME
DistroRelease: Ubuntu 18.04
HibernationDevice: RESUME=UUID=ada9b595-bbf2-40a3-8575-5908492bb969
InstallationDate: Installed on 2014-10-20 (1333 days ago)
InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64+mac
(20140722.2)
MachineType: ASUSTeK COMPUTER INC. G752VT
NonfreeKernelModules: nvidia_modeset nvidia wl
Package: linux (not installed)
ProcFB: 0 VESA VGA
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic
root=UUID=f6509d56-6183-464c-90bb-9c3be2c8abdf ro quiet splash
acpi_backlight=vendor vt.handoff=1
ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18
RelatedPackageVersions:
linux-restricted-modules-4.15.0-23-generic N/A
linux-backports-modules-4.15.0-23-generic N/A
linux-firmware 1.173.1
Tags: bionic
Uname: Linux 4.15.0-23-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm audio cdrom dip docker lpadmin plugdev sambashare sudo tty
video
_MarkForUpload: True
dmi.bios.date: 06/29/2017
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: G752VT.304
dmi.board.asset.tag: ATN12345678901234567
dmi.board.name: G752VT
dmi.board.vendor: ASUSTeK COMPUTER INC.
dmi.board.version: 1.0
dmi.chassis.asset.tag: ATN12345678901234567
dmi.chassis.type: 10
dmi.chassis.vendor: ASUSTeK COMPUTER INC.
dmi.chassis.version: 1.0
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvrG752VT.304:bd06/29/2017:svnASUSTeKCOMPUTERINC.:pnG752VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnG752VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
dmi.product.family: G
dmi.product.name: G752VT
dmi.product.version: 1.0
dmi.sys.vendor: ASUSTeK COMPUTER INC.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1775717/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1776655] Re: package linux-firmware 1.173.1 failed to install/upgrade: installed linux-firmware package post-installation script subprocess returned error exit status 1
*** This bug is a duplicate of bug 1776652 *** https://bugs.launchpad.net/bugs/1776652 this is the content of the the comment on the line of cp is for me #!/bin/sh -e # Copy the compatibility symlinks until initramfs-tools will be converted # to use the kmod program. if [ "$1" = "prereqs" ]; then exit 0; fi . /usr/share/initramfs-tools/hook-functions copy_exec /bin/kmod #cp -a /sbin/modprobe /sbin/rmmod $DESTDIR/sbin/ mkdir -p $DESTDIR/lib/modprobe.d/ if [ "$(echo /lib/modprobe.d/*)" != "/lib/modprobe.d/*" ]; then cp -a /lib/modprobe.d/* $DESTDIR/lib/modpro -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1776655 Title: package linux-firmware 1.173.1 failed to install/upgrade: installed linux-firmware package post-installation script subprocess returned error exit status 1 Status in linux-firmware package in Ubuntu: New Bug description: question do doing any change in selinux configuration ? ProblemType: Package DistroRelease: Ubuntu 18.04 Package: linux-firmware 1.173.1 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.2 AptOrdering: firefox:amd64: Install NULL: ConfigurePending Architecture: amd64 Date: Wed Jun 13 06:29:07 2018 Dependencies: ErrorMessage: installed linux-firmware package post-installation script subprocess returned error exit status 1 InstallationDate: Installed on 2017-01-07 (522 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) PackageArchitecture: all Python3Details: /usr/bin/python3.6, Python 3.6.5, python3-minimal, 3.6.5-3 PythonDetails: /usr/bin/python2.7, Python 2.7.15rc1, python-minimal, 2.7.15~rc1-1 RelatedPackageVersions: dpkg 1.19.0.5ubuntu2 apt 1.6.1 SourcePackage: linux-firmware Title: package linux-firmware 1.173.1 failed to install/upgrade: installed linux-firmware package post-installation script subprocess returned error exit status 1 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1776655/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1776655] Re: package linux-firmware 1.173.1 failed to install/upgrade: installed linux-firmware package post-installation script subprocess returned error exit status 1
*** This bug is a duplicate of bug 1776652 *** https://bugs.launchpad.net/bugs/1776652 the problem was in the file /usr/share/initramfs-tools/hooks/kmod this problema was resolv the problem was in the file /usr/share/initramfs-tools/hooks/kmod, tha have a aditional line that "cp -a /sbin/modprobe /sbin/rmmod $DESTDIR/sbin/" generate the error in the script , that for this reasons all process that execute this script was fail, i put the line in comment and all working without problem -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1776655 Title: package linux-firmware 1.173.1 failed to install/upgrade: installed linux-firmware package post-installation script subprocess returned error exit status 1 Status in linux-firmware package in Ubuntu: New Bug description: question do doing any change in selinux configuration ? ProblemType: Package DistroRelease: Ubuntu 18.04 Package: linux-firmware 1.173.1 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.2 AptOrdering: firefox:amd64: Install NULL: ConfigurePending Architecture: amd64 Date: Wed Jun 13 06:29:07 2018 Dependencies: ErrorMessage: installed linux-firmware package post-installation script subprocess returned error exit status 1 InstallationDate: Installed on 2017-01-07 (522 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) PackageArchitecture: all Python3Details: /usr/bin/python3.6, Python 3.6.5, python3-minimal, 3.6.5-3 PythonDetails: /usr/bin/python2.7, Python 2.7.15rc1, python-minimal, 2.7.15~rc1-1 RelatedPackageVersions: dpkg 1.19.0.5ubuntu2 apt 1.6.1 SourcePackage: linux-firmware Title: package linux-firmware 1.173.1 failed to install/upgrade: installed linux-firmware package post-installation script subprocess returned error exit status 1 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1776655/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1777378] Re: [nvidia] GDM no longer presents GUI login Ubuntu 18.04
No problem. It's not uncommon for bugs to end like this. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-390 in Ubuntu. https://bugs.launchpad.net/bugs/1777378 Title: [nvidia] GDM no longer presents GUI login Ubuntu 18.04 Status in nvidia-graphics-drivers-390 package in Ubuntu: Invalid Bug description: Background: Did a clean install of Ubuntu 18.04, standard Gnome desktop. Used nVidia proprietary drivers from Ubuntu repo. Worked quite well for over two weeks. When booting up on Friday 15th June, 2018 no longer had a GUI login screen. There was just a few lines in tty1. Can still login to other terminals and through SSH. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: gdm3 3.28.2-0ubuntu1.2 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Uname: Linux 4.15.0-23-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 Date: Sun Jun 17 22:53:22 2018 InstallationDate: Installed on 2018-05-20 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gdm3 UpgradeStatus: No upgrade log present (probably fresh install) mtime.conffile..etc.gdm3.custom.conf: 2018-05-31T00:51:08.204556 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-05-20 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) NonfreeKernelModules: nvidia_modeset nvidia Package: gdm3 3.28.2-0ubuntu1.2 PackageArchitecture: amd64 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True mtime.conffile..etc.gdm3.custom.conf: 2018-06-18T00:27:55.234654 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-05-20 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) NonfreeKernelModules: nvidia_modeset nvidia Package: mutter PackageArchitecture: amd64 ProcEnviron: LANG=en_US.UTF-8 TERM=xterm-256color PATH=(custom, no user) SHELL=/bin/bash ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True mtime.conffile..etc.gdm3.custom.conf: 2018-06-18T00:27:55.234654 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-390/+bug/1777378/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1776340] Re: linux-oem: 4.15.0-1009.12 -proposed tracker
** Summary changed: - linux-oem: -proposed tracker + linux-oem: 4.15.0-1009.12 -proposed tracker -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1776340 Title: linux-oem: 4.15.0-1009.12 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: New Status in Kernel SRU Workflow certification-testing series: New Status in Kernel SRU Workflow prepare-package series: In Progress Status in Kernel SRU Workflow prepare-package-meta series: In Progress Status in Kernel SRU Workflow prepare-package-signed series: In Progress Status in Kernel SRU Workflow promote-to-proposed series: New Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: New Status in Kernel SRU Workflow security-signoff series: New Status in Kernel SRU Workflow upload-to-ppa series: New Status in Kernel SRU Workflow verification-testing series: New Status in linux-oem package in Ubuntu: Invalid Status in linux-oem source package in Bionic: Confirmed Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-stable-master-bug: 1776338 phase: Packaging To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1776340/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1777378] Re: [nvidia] GDM no longer presents GUI login Ubuntu 18.04
I believe I have found the culprit. Not happy to say that it looks like it was a configuration change I made to try to fix the ubiquitous screen-tearing and frame synch problems that some applications have. I *believed* I had reverted all the changes I made when I saw they hadn't fixed the issue, apparently I missed one. Oddly, the machine had booted up into a proper GDM session several times since that attempt. In any case, I went back over my research and double-checked anything that we hadn't already covered and found an article about adding a zz-nvidia- modeset.conf file in the modprobe.d folder. This had one working line in it: "options nvidia_drm modeset=1" Once commented that line out and updated initramfs the machine was able to make all the way into the full GDM session again. I am very sorry to wasted your time on this problem that was obviously due to an oversight on my part. ** Changed in: nvidia-graphics-drivers-390 (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-390 in Ubuntu. https://bugs.launchpad.net/bugs/1777378 Title: [nvidia] GDM no longer presents GUI login Ubuntu 18.04 Status in nvidia-graphics-drivers-390 package in Ubuntu: Invalid Bug description: Background: Did a clean install of Ubuntu 18.04, standard Gnome desktop. Used nVidia proprietary drivers from Ubuntu repo. Worked quite well for over two weeks. When booting up on Friday 15th June, 2018 no longer had a GUI login screen. There was just a few lines in tty1. Can still login to other terminals and through SSH. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: gdm3 3.28.2-0ubuntu1.2 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Uname: Linux 4.15.0-23-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 Date: Sun Jun 17 22:53:22 2018 InstallationDate: Installed on 2018-05-20 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gdm3 UpgradeStatus: No upgrade log present (probably fresh install) mtime.conffile..etc.gdm3.custom.conf: 2018-05-31T00:51:08.204556 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-05-20 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) NonfreeKernelModules: nvidia_modeset nvidia Package: gdm3 3.28.2-0ubuntu1.2 PackageArchitecture: amd64 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True mtime.conffile..etc.gdm3.custom.conf: 2018-06-18T00:27:55.234654 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-05-20 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) NonfreeKernelModules: nvidia_modeset nvidia Package: mutter PackageArchitecture: amd64 ProcEnviron: LANG=en_US.UTF-8 TERM=xterm-256color PATH=(custom, no user) SHELL=/bin/bash ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True mtime.conffile..etc.gdm3.custom.conf: 2018-06-18T00:27:55.234654 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-390/+bug/1777378/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1776340] Re: linux-oem: -proposed tracker
** Summary changed: - linux-oem: 4.15.0-1009.12 -proposed tracker + linux-oem: -proposed tracker -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1776340 Title: linux-oem: 4.15.0-1009.12 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: New Status in Kernel SRU Workflow certification-testing series: New Status in Kernel SRU Workflow prepare-package series: In Progress Status in Kernel SRU Workflow prepare-package-meta series: In Progress Status in Kernel SRU Workflow prepare-package-signed series: In Progress Status in Kernel SRU Workflow promote-to-proposed series: New Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: New Status in Kernel SRU Workflow security-signoff series: New Status in Kernel SRU Workflow upload-to-ppa series: New Status in Kernel SRU Workflow verification-testing series: New Status in linux-oem package in Ubuntu: Invalid Status in linux-oem source package in Bionic: Confirmed Bug description: This bug is for tracking the upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- kernel-stable-master-bug: 1776338 phase: Packaging To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1776340/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1776319] Re: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00
screenshot upload - 1st time didn't work ** Attachment added: "screenshot - assertion failed" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+attachment/5154809/+files/IMG_4250.JPG -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F
[Kernel-packages] [Bug 1773643] Re: [Clevo W253EUQ] Turn on bluetooth with Fn+F12 not working
Also I identified this issue by using this command: dmesg |grep -i blue I got output which stated "hci0: don't support firmware rome" -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1773643 Title: [Clevo W253EUQ] Turn on bluetooth with Fn+F12 not working Status in linux package in Ubuntu: Incomplete Bug description: Hello, Since long time my [Clevo W253EUQ] Turn on bluetooth with Fn+F12 not working For more information see this link bellow https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1322068 Could you help me to fix this bug ? Best regards Battant ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-image-4.15.0-23-generic 4.15.0-23.25 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Uname: Linux 4.15.0-23-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sun May 27 13:21:46 2018 InstallationDate: Installed on 2018-04-29 (27 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) SourcePackage: linux-signed UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mparchet 1714 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-04-29 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: CLEVO CO. W240EU/W250EUQ/W270EUQ Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=9d6286f1-598b-46c8-a491-3e29fc732cb9 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-23-generic N/A linux-backports-modules-4.15.0-23-generic N/A linux-firmware 1.173.1 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/11/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.5 dmi.board.asset.tag: Tag 12345 dmi.board.name: W240EU/W250EUQ/W270EUQ dmi.board.vendor: CLEVO CO. dmi.board.version: V3.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd11/11/2013:svnCLEVOCO.:pnW240EU/W250EUQ/W270EUQ:pvrNotApplicable:rvnCLEVOCO.:rnW240EU/W250EUQ/W270EUQ:rvrV3.0:cvnNoEnclosure:ct10:cvrN/A: dmi.product.family: Not Applicable dmi.product.name: W240EU/W250EUQ/W270EUQ dmi.product.version: Not Applicable dmi.sys.vendor: CLEVO CO. --- ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mparchet 1714 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-04-29 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: CLEVO CO. W240EU/W250EUQ/W270EUQ Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=9d6286f1-598b-46c8-a491-3e29fc732cb9 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-23-generic N/A linux-backports-modules-4.15.0-23-generic N/A linux-firmware 1.173.1 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/11/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.5 dmi.board.asset.tag: Tag 12345 dmi.board.name: W240EU/W250EUQ/W270EUQ dmi.board.vendor: CLEVO CO. dmi.board.version: V3.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd11/11/2013:svnCLEVOCO.:pnW240EU/W250EUQ/W270EUQ:pvrNotApplicable:rvnCLEVOCO.:rnW240EU/W250EUQ/W270EUQ:rvrV3.0:cvnNoEnclosure:ct10:cvrN/A: dmi.product.family: Not Applicable dmi.product.name: W240EU/W250EUQ/W270EUQ dmi.product.version: Not Applicable dmi.sys.vendor: CLEVO CO. --- ApportVersion: 2.20.9-0ubuntu7.1
[Kernel-packages] [Bug 1773643] Re: [Clevo W253EUQ] Turn on bluetooth with Fn+F12 not working
Battant et all, I believe the issue is from a commit that happened after the 4.13.xx kernel's ie 4.15 is affected. The bug affects Lenovo's for sure as that is what I have but others too. More details here: https://bugzilla.kernel.org/show_bug.cgi?id=199271 Also to fix try a 4.13.xx kernel. ** Bug watch added: Linux Kernel Bug Tracker #199271 https://bugzilla.kernel.org/show_bug.cgi?id=199271 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1773643 Title: [Clevo W253EUQ] Turn on bluetooth with Fn+F12 not working Status in linux package in Ubuntu: Incomplete Bug description: Hello, Since long time my [Clevo W253EUQ] Turn on bluetooth with Fn+F12 not working For more information see this link bellow https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1322068 Could you help me to fix this bug ? Best regards Battant ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-image-4.15.0-23-generic 4.15.0-23.25 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Uname: Linux 4.15.0-23-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sun May 27 13:21:46 2018 InstallationDate: Installed on 2018-04-29 (27 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) SourcePackage: linux-signed UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mparchet 1714 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-04-29 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: CLEVO CO. W240EU/W250EUQ/W270EUQ Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=9d6286f1-598b-46c8-a491-3e29fc732cb9 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-23-generic N/A linux-backports-modules-4.15.0-23-generic N/A linux-firmware 1.173.1 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/11/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.5 dmi.board.asset.tag: Tag 12345 dmi.board.name: W240EU/W250EUQ/W270EUQ dmi.board.vendor: CLEVO CO. dmi.board.version: V3.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd11/11/2013:svnCLEVOCO.:pnW240EU/W250EUQ/W270EUQ:pvrNotApplicable:rvnCLEVOCO.:rnW240EU/W250EUQ/W270EUQ:rvrV3.0:cvnNoEnclosure:ct10:cvrN/A: dmi.product.family: Not Applicable dmi.product.name: W240EU/W250EUQ/W270EUQ dmi.product.version: Not Applicable dmi.sys.vendor: CLEVO CO. --- ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mparchet 1714 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-04-29 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: CLEVO CO. W240EU/W250EUQ/W270EUQ Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=9d6286f1-598b-46c8-a491-3e29fc732cb9 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-23-generic N/A linux-backports-modules-4.15.0-23-generic N/A linux-firmware 1.173.1 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/11/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.5 dmi.board.asset.tag: Tag 12345 dmi.board.name: W240EU/W250EUQ/W270EUQ dmi.board.vendor: CLEVO CO. dmi.board.version: V3.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias:
[Kernel-packages] [Bug 1776319] Re: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00
in response to [Phillip Susi (psusi) who wrote: It looks like the problem is either a bad sd card, or a bug in the kernel] I tried the install again, this time with a different SD card (same brand and type). The situation was a bit different because the first two times the SD card was not partitioned before the install but this time there already was an existing partition with data that I wanted to preserve. The third install attempt I requested that the existing partition be made smaller and a new partition be created with the remaining space for lubuntu. This also crashed install but with a different error. See attached screenshot showing the "Assertion failed" message. Also - after the third failed install I was left in desktop / demo mode so I was able to run apport-collect. I may have actually run the apport-collect twice. Joseph Salisbury asked if this was an attempted update or upgrade. No, fresh install. This computer presently runs windows 10. I am attempting create a dual boot with an install onto the SD card of lubuntu 18.04 (via booting from USB). Joseph Salisbury asked if I can try the latest upstream kernel. I've not tried that yet but I will, Probably won't be today though. Thanks to all. ** Attachment added: "screenshot - Assertion failed" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+attachment/5154806/+files/IMG_4250.JPG -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No
[Kernel-packages] [Bug 1776319] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154791/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio
[Kernel-packages] [Bug 1776319] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154792/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio
[Kernel-packages] [Bug 1776319] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154795/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu
[Kernel-packages] [Bug 1776319] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154797/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F
[Kernel-packages] [Bug 1776319] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154798/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F
[Kernel-packages] [Bug 1776319] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154794/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F
[Kernel-packages] [Bug 1776319] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154796/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518
[Kernel-packages] [Bug 1776319] PciMultimedia.txt
apport information ** Attachment added: "PciMultimedia.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154793/+files/PciMultimedia.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518
[Kernel-packages] [Bug 1776319] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154799/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio
[Kernel-packages] [Bug 1776319] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154801/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F
[Kernel-packages] [Bug 1776319] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154800/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio
[Kernel-packages] [Bug 1776319] Card0.Amixer.values.txt
apport information ** Attachment added: "Card0.Amixer.values.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154785/+files/Card0.Amixer.values.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu
[Kernel-packages] [Bug 1776319] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154784/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio
[Kernel-packages] [Bug 1776319] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154790/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F
[Kernel-packages] [Bug 1776319] Card0.Codecs.codec.0.txt
apport information ** Attachment added: "Card0.Codecs.codec.0.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154786/+files/Card0.Codecs.codec.0.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0:
[Kernel-packages] [Bug 1776319] ArecordDevices.txt
apport information ** Attachment added: "ArecordDevices.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154783/+files/ArecordDevices.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518
[Kernel-packages] [Bug 1776319] Card0.Codecs.codec.2.txt
apport information ** Attachment added: "Card0.Codecs.codec.2.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154787/+files/Card0.Codecs.codec.2.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0:
[Kernel-packages] [Bug 1776319] Card1.Amixer.values.txt
apport information ** Attachment added: "Card1.Amixer.values.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154788/+files/Card1.Amixer.values.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu
[Kernel-packages] [Bug 1776319] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154789/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F
[Kernel-packages] [Bug 1776319] AplayDevices.txt
apport information ** Attachment added: "AplayDevices.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154782/+files/AplayDevices.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F
[Kernel-packages] [Bug 1776319] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154768/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1776319] Re: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00
apport information ** Description changed: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek + --- + AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. + ApportVersion: 2.20.9-0ubuntu7 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC1: lubuntu8518 F pulseaudio + /dev/snd/controlC0: lubuntu8518 F pulseaudio + Card0.Amixer.info: + Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' +Mixer name : 'Realtek ALC269VC' +Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' +Controls : 56 +Simple ctrls : 15 + Card1.Amixer.info: + Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' +Mixer name : 'USB Mixer' +Components :
[Kernel-packages] [Bug 1776319] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154773/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1777378] Re: [nvidia] GDM no longer presents GUI login Ubuntu 18.04
For #42, the contents of 10-nvidia.conf: Section "OutputClass" Identifier "nvidia" MatchDriver "nvidia-drm" Driver "nvidia" Option "AllowEmptyInitialConfiguration" ModulePath "/usr/lib/x86_64-linux-gnu/nvidia/xorg" EndSection -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-390 in Ubuntu. https://bugs.launchpad.net/bugs/1777378 Title: [nvidia] GDM no longer presents GUI login Ubuntu 18.04 Status in nvidia-graphics-drivers-390 package in Ubuntu: Incomplete Bug description: Background: Did a clean install of Ubuntu 18.04, standard Gnome desktop. Used nVidia proprietary drivers from Ubuntu repo. Worked quite well for over two weeks. When booting up on Friday 15th June, 2018 no longer had a GUI login screen. There was just a few lines in tty1. Can still login to other terminals and through SSH. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: gdm3 3.28.2-0ubuntu1.2 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Uname: Linux 4.15.0-23-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 Date: Sun Jun 17 22:53:22 2018 InstallationDate: Installed on 2018-05-20 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gdm3 UpgradeStatus: No upgrade log present (probably fresh install) mtime.conffile..etc.gdm3.custom.conf: 2018-05-31T00:51:08.204556 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-05-20 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) NonfreeKernelModules: nvidia_modeset nvidia Package: gdm3 3.28.2-0ubuntu1.2 PackageArchitecture: amd64 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True mtime.conffile..etc.gdm3.custom.conf: 2018-06-18T00:27:55.234654 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-05-20 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) NonfreeKernelModules: nvidia_modeset nvidia Package: mutter PackageArchitecture: amd64 ProcEnviron: LANG=en_US.UTF-8 TERM=xterm-256color PATH=(custom, no user) SHELL=/bin/bash ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True mtime.conffile..etc.gdm3.custom.conf: 2018-06-18T00:27:55.234654 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-390/+bug/1777378/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1776319] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154767/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More
[Kernel-packages] [Bug 1777378] Re: [nvidia] GDM no longer presents GUI login Ubuntu 18.04
For #41 and #43; tried rebooting into the previous kernel 4.0.15.22. Both with "nomodeset" and without it. With "nomodeset" the GDM login presents and I can log in! But it doesn't appear to be using the actual nvidia driver... Only resolution available is 1027x768 (not the native resolution of the monitor.) And nvidia settings does not show any of the usaul tabs/functions. Without "nomodeset" the GDM does not display. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-390 in Ubuntu. https://bugs.launchpad.net/bugs/1777378 Title: [nvidia] GDM no longer presents GUI login Ubuntu 18.04 Status in nvidia-graphics-drivers-390 package in Ubuntu: Incomplete Bug description: Background: Did a clean install of Ubuntu 18.04, standard Gnome desktop. Used nVidia proprietary drivers from Ubuntu repo. Worked quite well for over two weeks. When booting up on Friday 15th June, 2018 no longer had a GUI login screen. There was just a few lines in tty1. Can still login to other terminals and through SSH. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: gdm3 3.28.2-0ubuntu1.2 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Uname: Linux 4.15.0-23-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 Date: Sun Jun 17 22:53:22 2018 InstallationDate: Installed on 2018-05-20 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gdm3 UpgradeStatus: No upgrade log present (probably fresh install) mtime.conffile..etc.gdm3.custom.conf: 2018-05-31T00:51:08.204556 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-05-20 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) NonfreeKernelModules: nvidia_modeset nvidia Package: gdm3 3.28.2-0ubuntu1.2 PackageArchitecture: amd64 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True mtime.conffile..etc.gdm3.custom.conf: 2018-06-18T00:27:55.234654 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-05-20 (28 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) NonfreeKernelModules: nvidia_modeset nvidia Package: mutter PackageArchitecture: amd64 ProcEnviron: LANG=en_US.UTF-8 TERM=xterm-256color PATH=(custom, no user) SHELL=/bin/bash ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True mtime.conffile..etc.gdm3.custom.conf: 2018-06-18T00:27:55.234654 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-390/+bug/1777378/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1777527] Re: 'ELAN0618 Touchpad' is not recognized on a fresh install
** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1777527 Title: 'ELAN0618 Touchpad' is not recognized on a fresh install Status in linux package in Ubuntu: Confirmed Bug description: I tried ubuntu 16, 17 and 18. None of them were able to recongize my touchpad at all. I tried to boot from a windows installation USB, the touchpad worked right away. $ lsb_release -rd Description: Ubuntu 18.04 LTS Release: 18.04 $ uname -a Linux Mazen-PC 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux $ dmesg > ~/dmesg OUTPUT ATTACHED $ cat /proc/bus/input/devices > ~/devices OUTPUT ATTACHED /var/log/Xorg.0.log Doesn't Exist! Note: I got the touchpad manufacturer and model (Elan0618) by installing Windows to get more info as Ubuntu was unable to detect the touchpad at all. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-image-4.15.0-20-generic 4.15.0-20.21 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 NonfreeKernelModules: kpatch_livepatch_Ubuntu_4_15_0_20_21_generic_39 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Mon Jun 18 16:24:57 2018 InstallationDate: Installed on 2018-06-16 (2 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) SourcePackage: linux-signed UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1777527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1752772] Re: r8169 ethernet card don't work after returning from suspension
Not sure how to tag, but 4.15.0-24-generic has resolved this on my Lenovo ThinkPad E470 -- several suspend and reboot cycles without issue now. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1752772 Title: r8169 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Bionic: Fix Committed Bug description: ===SRU Justification=== [Impact] Ethernet r8169 stops working after system resumed from suspend. [Test] User confirmed these patches fix the issue. r8169 continues to work after resume from suspend. [Regression Potential] Medium. The fix is limited to one device, all patches are in mainline. The WOL default change might cause regression for users that depend on BIOS settings. We can advice them to use userspace tool (systemd, ethtool, etc.) instead. ===Original Bug Report=== I have noticed that the network stopped working on my desktop after I've suspended the system and woke it up. On dmesg there are messages like: [ 150.877998] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 150.944101] do_IRQ: 3.37 No irq handler for vector [ 150.944105] r8169 :01:00.0 enp1s0: link down [ 150.944180] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready When using Xenial (from a different install), this problem is not happening. This is happening on Bionic. There are only two ways to restore connectivity: 1) Reboot the system; 2) Remove the r8169 module and reinsert it with modprobe. The motherboard is a AsRock H55M-LE and the Ethernet controller is: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-firmware 1.172 ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 Uname: Linux 4.15.0-10-generic x86_64 ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 CurrentDesktop: LXDE Date: Fri Mar 2 00:21:57 2018 Dependencies: InstallationDate: Installed on 2018-02-26 (3 days ago) InstallationMedia: Lubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180226) PackageArchitecture: all SourcePackage: linux-firmware UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-10-generic. ApportVersion: 2.20.8-0ubuntu10 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: MID [HDA Intel MID], device 0: VT1818S Analog [VT1818S Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: usuario1153 F pulseaudio /dev/snd/controlC1: usuario1153 F pulseaudio Card0.Amixer.info: Card hw:0 'MID'/'HDA Intel MID at 0xfbdf8000 irq 26' Mixer name : 'VIA VT1818S' Components : 'HDA:11060440,18492818,0010' Controls : 40 Simple ctrls : 17 Card1.Amixer.info: Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfbffc000 irq 27' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 7 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] CurrentDesktop: LXDE Dependencies: DistroRelease: Ubuntu 18.04 HibernationDevice: RESUME=UUID=edd83175-c707-4b31-90d2-ce2f5cebc73f InstallationDate: Installed on 2018-02-26 (3 days ago) InstallationMedia: Lubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180226) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. Package: linux-firmware 1.172 PackageArchitecture: all ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz root=UUID=0c4fc517-b7a0-49b0-bfcb-0485dfe6413b ro quiet ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3 RelatedPackageVersions: linux-restricted-modules-4.15.0-10-generic N/A linux-backports-modules-4.15.0-10-generic N/A linux-firmware 1.172 RfKill: Tags: bionic Uname: Linux 4.15.0-10-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip libvirt lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 10/20/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P1.80 dmi.board.name: H55M-LE dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias:
[Kernel-packages] [Bug 1776319] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154766/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1776319] PciMultimedia.txt
apport information ** Attachment added: "PciMultimedia.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154765/+files/PciMultimedia.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1776319] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154770/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1776319] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154771/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1776319] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154769/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1776319] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154772/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1776319] ArecordDevices.txt
apport information ** Attachment added: "ArecordDevices.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154755/+files/ArecordDevices.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1776319] Card1.Amixer.values.txt
apport information ** Attachment added: "Card1.Amixer.values.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154760/+files/Card1.Amixer.values.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More
[Kernel-packages] [Bug 1776319] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154756/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1776319] Card0.Amixer.values.txt
apport information ** Attachment added: "Card0.Amixer.values.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154757/+files/Card0.Amixer.values.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More
[Kernel-packages] [Bug 1776319] Card0.Codecs.codec.0.txt
apport information ** Attachment added: "Card0.Codecs.codec.0.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154758/+files/Card0.Codecs.codec.0.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More
[Kernel-packages] [Bug 1776319] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154764/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1776319] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154763/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1776319] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154762/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1776319] Card0.Codecs.codec.2.txt
apport information ** Attachment added: "Card0.Codecs.codec.2.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154759/+files/Card0.Codecs.codec.2.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More
[Kernel-packages] [Bug 1776319] AplayDevices.txt
apport information ** Attachment added: "AplayDevices.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154754/+files/AplayDevices.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1776319] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154761/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lubuntu8518 F pulseaudio /dev/snd/controlC0: lubuntu8518 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' Mixer name : 'Realtek ALC269VC' Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' Controls : 56 Simple ctrls : 15 Card1.Amixer.info: Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' Mixer name : 'USB Mixer' Components : 'USB058f:3841' Controls : 4 Simple ctrls : 2 CasperVersion: 1.394 CurrentDesktop: LXDE DistroRelease: Ubuntu 18.04 LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Direkt-Tek DTLAPY116-2 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/30/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: LC-BI-11.6-S133AR110-399-F dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DEFAULT_STRING dmi.board.vendor: DEFAULT_STRING dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: To be filled by O.E.M. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: DTLAPY116-2 dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Direkt-Tek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1776319] Re: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00
apport information ** Tags added: apport-collected ** Description changed: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) + --- + AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-20-generic. + ApportVersion: 2.20.9-0ubuntu7 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC1: lubuntu8518 F pulseaudio + /dev/snd/controlC0: lubuntu8518 F pulseaudio + Card0.Amixer.info: + Card hw:0 'PCH'/'HDA Intel PCH at 0x91218000 irq 128' +Mixer name : 'Realtek ALC269VC' +Components : 'HDA:10ec0269,1c6c122a,00100203 HDA:8086280a,80860101,0010' +Controls : 56 +Simple ctrls : 15 + Card1.Amixer.info: + Card hw:1 'Camera'/'Alcor Micro, Corp. USB 2.0 PC Camera at usb-:00:15.0-8, high speed' +Mixer name : 'USB Mixer' +Components : 'USB058f:3841' +Controls : 4 +Simple ctrls : 2 + CasperVersion: 1.394 + CurrentDesktop: LXDE + DistroRelease: Ubuntu 18.04 + LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) + MachineType: Direkt-Tek DTLAPY116-2 + Package: linux (not installed) + ProcEnviron: + TERM=xterm-256color + PATH=(custom, no user) + XDG_RUNTIME_DIR= + LANG=en_US.UTF-8 + SHELL=/bin/bash + ProcFB: 0 inteldrmfb + ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper only-ubiquity quiet splash --- + ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 + RelatedPackageVersions: + linux-restricted-modules-4.15.0-20-generic N/A + linux-backports-modules-4.15.0-20-generic N/A + linux-firmware 1.173 + Tags: bionic + Uname: Linux 4.15.0-20-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo + _MarkForUpload: True + dmi.bios.date: 08/30/2017 + dmi.bios.vendor: American Megatrends Inc. + dmi.bios.version: LC-BI-11.6-S133AR110-399-F + dmi.board.asset.tag: To be filled by O.E.M. + dmi.board.name: DEFAULT_STRING + dmi.board.vendor: DEFAULT_STRING + dmi.board.version: To be filled by O.E.M. + dmi.chassis.asset.tag: To be filled by O.E.M. + dmi.chassis.type: 9 + dmi.chassis.vendor: To be filled by O.E.M. + dmi.chassis.version: To be filled by O.E.M. + dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrLC-BI-11.6-S133AR110-399-F:bd08/30/2017:svnDirekt-Tek:pnDTLAPY116-2:pvrTobefilledbyO.E.M.:rvnDEFAULT_STRING:rnDEFAULT_STRING:rvrTobefilledbyO.E.M.:cvnTobefilledbyO.E.M.:ct9:cvrTobefilledbyO.E.M.: + dmi.product.family: To be filled by O.E.M. + dmi.product.name: DTLAPY116-2 + dmi.product.version: To be filled by O.E.M. + dmi.sys.vendor: Direkt-Tek ** Attachment added: "AlsaDevices.txt" https://bugs.launchpad.net/bugs/1776319/+attachment/5154753/+files/AlsaDevices.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop
[Kernel-packages] [Bug 1777679] Re: ELAN1200 touchpad not working at all with kernel 4.15+; Recognized as ITE 8910 keyboard
Thanks everyone, 4.17.2 seems to fix the problem. Did not need any acpi GRUB parameters and unblacklisted i2c-hid without any problems. I now have touchpad control! To anyone who runs into this problem here is the solution: - get the prerequisits: sudo apt install git fakeroot build-essential ncurses-dev xz-utils libssl-dev bc - Download the source for kernel 4.17.2 on kernel.org. - Extract the tar.xz file in a folder of your choosing with tar -xJf. - Go in the extracted folder and copy your current configuration which is in /boot/ with `cp /boot/config-$(uname -r) ./.config` (Might need to be root) - run `make menuconfig`, save the config to .config and exit. - run `make -j ` (if you forget -j it will take for ever) - run `make modules_install -j ` - run `make install -j Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1777679 Title: ELAN1200 touchpad not working at all with kernel 4.15+; Recognized as ITE 8910 keyboard Status in linux package in Ubuntu: Fix Committed Bug description: Laptop is an Asus-GL503VD Touchpad is an ELAN touchpad model 1200. This bug is relative to the Asus-GL503VD and any Asus laptop using the ELAN1200 touchpad. I tried Arch, Debian, Ubuntu 14/16/18, Pop_OS, Sabayon Linux, Fedora. Same problem, touchpad is totally unresponsive. From what I understand the touchpad is being recognized as a keyboard and I cannot get any driver to recognize it: elan-i2c or synaptics. The touchpad is also being recognized as a USB device. This behaviour was consistent on kernels 4.15.0-22, 4.15.0-23 and 4.17.1. Right now trying to make it work on kernel 4.15.0-23 because it seems more "main-stream". Note: I have a keyboard recognized as AT Translated Set 2 keyboard which makes me believe I do not need ITE8910 to be a keyboard. Note2: Been researching LKM development. Managed to make a signed 'hello world' lkm and make it output in dmesg. Willing to help debug/develop the driver for this touchpad. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ttr1798 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 HibernationDevice: RESUME=UUID=7791e5a6-d685-49b9-93d7-017c1abf4b89 InstallationDate: Installed on 2018-06-10 (9 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. GL503VD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=screen PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_CA.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=98160487-6d8d-429c-830c-035e5faeb890 ro CONFIG_MODVERSIONS=true nvidia.modeset=1 nouveau.modeset=0 acpi=force i8042.reset i8042.nomux i8042.nopnp i8042.noloop ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-23-generic N/A linux-backports-modules-4.15.0-23-generic N/A linux-firmware 1.173.1 Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip libvirt lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 10/03/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL503VD.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL503VD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL503VD.304:bd10/03/2017:svnASUSTeKCOMPUTERINC.:pnGL503VD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL503VD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.family: GL dmi.product.name: GL503VD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1777679/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1521173] Re: AER: Corrected error received: id=00e0
Where is this fixed? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1521173 Title: AER: Corrected error received: id=00e0 Status in Linux: Unknown Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Triaged Bug description: Note: Current workaround is to add pci=noaer to your kernel command line: 1) edit /etc/default/grub and and add pci=noaer to the line starting with GRUB_CMDLINE_LINUX_DEFAULT. It will look like this: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash pci=noaer" 2) run "sudo update-grub" 3) reboot My dmesg gets completely spammed with the following messages appearing over and over again. It stops after one s3 cycle; it only happens after reboot. [ 5315.986588] pcieport :00:1c.0: AER: Corrected error received: id=00e0 [ 5315.987249] pcieport :00:1c.0: can't find device of ID00e0 [ 5315.995632] pcieport :00:1c.0: AER: Corrected error received: id=00e0 [ 5315.995664] pcieport :00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 5315.995674] pcieport :00:1c.0: device [8086:9d14] error status/mask=0001/2000 [ 5315.995683] pcieport :00:1c.0:[ 0] Receiver Error [ 5316.002772] pcieport :00:1c.0: AER: Corrected error received: id=00e0 [ 5316.002811] pcieport :00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 5316.002826] pcieport :00:1c.0: device [8086:9d14] error status/mask=0001/2000 [ 5316.002838] pcieport :00:1c.0:[ 0] Receiver Error [ 5316.009926] pcieport :00:1c.0: AER: Corrected error received: id=00e0 [ 5316.009964] pcieport :00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 5316.009979] pcieport :00:1c.0: device [8086:9d14] error status/mask=0001/2000 [ 5316.009991] pcieport :00:1c.0:[ 0] Receiver Error ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.2.0-19-generic 4.2.0-19.23 [modified: boot/vmlinuz-4.2.0-19-generic] ProcVersionSignature: Ubuntu 4.2.0-19.23-generic 4.2.6 Uname: Linux 4.2.0-19-generic x86_64 ApportVersion: 2.19.2-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC0D0c: david 1502 F...m pulseaudio /dev/snd/controlC0: david 1502 F pulseaudio CurrentDesktop: Unity Date: Mon Nov 30 13:19:00 2015 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=fe528b90-b4eb-4a20-82bd-6a03b79cfb14 InstallationDate: Installed on 2015-11-28 (2 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Alpha amd64 (20151127) MachineType: Dell Inc. Inspiron 13-7359 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-19-generic.efi.signed root=UUID=94d54f88-5d18-4e2b-960a-8717d6e618bb ro noprompt persistent quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.2.0-19-generic N/A linux-backports-modules-4.2.0-19-generic N/A linux-firmware1.153 SourcePackage: linux UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/07/2015 dmi.bios.vendor: Dell Inc. dmi.bios.version: 01.00.00 dmi.board.name: 0NT3WX dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr01.00.00:bd08/07/2015:svnDellInc.:pnInspiron13-7359:pvr:rvnDellInc.:rn0NT3WX:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Inspiron 13-7359 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1521173/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1767927] Comment bridged from LTC Bugzilla
--- Comment From cdead...@us.ibm.com 2018-06-20 17:50 EDT--- Ubuntu issue. Removing IBM FW tag. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1767927 Title: ISST-LTE:pKVM:Ubuntu1804: rcu_sched self-detected stall on CPU follow by CPU ATTEMPT TO RE-ENTER FIRMWARE! Status in The Ubuntu-power-systems project: Fix Released Status in linux package in Ubuntu: Fix Released Status in linux source package in Bionic: Fix Released Bug description: == Comment: #0 - Application Cdeadmin - 2018-03-20 14:10:53 == == Comment: #1 - Application Cdeadmin - 2018-03-20 14:10:54 == == Comment: #2 - Application Cdeadmin - 2018-03-20 14:10:56 == --- Comment From dougmill-ibm 2018-03-20 13:51:47 EDT --- This problem is not tied to a Linux distro. It will be fixed in firmware, as I understand it. Let us close any redundant issues for this same problem. Mark them as duplicate. == Comment: #3 - Application Cdeadmin - 2018-03-20 15:50:54 == --- Comment From mzipse 2018-03-20 15:44:26 EDT --- @stewart-ibm @svaidy , I need to you take a first look. The stop fixes that Vaidy had previously highlighted in a recent note are included in the 3/15 PNOR. == Comment: #5 - Application Cdeadmin - 2018-04-04 16:10:56 == --- Comment From haochanh 2018-04-04 16:04:07 EDT --- We update to 0330, bmc=1.18, then we hit bug 1134. Currently we are running with disable stop5 but still see the watchdog: hard lockup. After 2 hours of test run, I am seeing the "Watchdog: Lockup' and "became unstuck" [Wed Apr 4 13:38:25 2018] Watchdog CPU:42 Hard LOCKUP [Wed Apr 4 13:38:25 2018] Modules linked in: vhost_net vhost macvtap macvlan tap xfs xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter rpcsec_gss_krb5 nfsv4 nfs fscache rdma_ucm(OE) ib_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_uverbs(OE) ib_umad(OE) esp6_offload esp6 esp4_offload esp4 xfrm_algo mlx5_fpga_tools(OE) mlx5_ib(OE) mlx5_core(OE) mlxfw(OE) cxl pnv_php mlx4_en(OE) mlx4_ib(OE) ib_core(OE) mlx4_core(OE) devlink mlx_compat(OE) kvm_hv kvm binfmt_misc dm_service_time dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua input_leds joydev mac_hid idt_89hpesx ipmi_powernv [Wed Apr 4 13:38:25 2018] vmx_crypto ipmi_devintf at24 ofpart uio_pdrv_genirq cmdlinepart uio powernv_flash ipmi_msghandler mtd crct10dif_vpmsum opal_prd ibmpowernv nfsd sch_fq_codel auth_rpcgss nfs_acl lockd grace sunrpc knem(OE) ip_tables x_tables autofs4 btrfs xor zstd_compress raid6_pq ses enclosure scsi_transport_sas hid_generic usbhid hid lpfc ast i2c_algo_bit ttm drm_kms_helper nvmet_fc syscopyarea sysfillrect nvmet sysimgblt fb_sys_fops nvme_fc nvme_fabrics crc32c_vpmsum drm i40e scsi_transport_fc aacraid [last unloaded: mlxfw] [Wed Apr 4 13:38:25 2018] CPU: 42 PID: 0 Comm: swapper/42 Tainted: G OE4.15.0-12-generic #13 [Wed Apr 4 13:38:25 2018] NIP: c00a3ca4 LR: c00a3ca4 CTR: c0008000 [Wed Apr 4 13:38:25 2018] REGS: c00ff596fc40 TRAP: 0100 Tainted: G OE (4.15.0-12-generic) [Wed Apr 4 13:38:25 2018] MSR: 90001033 CR: 24004482 XER: 2004 [Wed Apr 4 13:38:25 2018] CFAR: c00ff596fda0 SOFTE: 42 GPR00: c00a3ca4 c00ff596fda0 c16eb200 c00ff596fc40 GPR04: b0001033 c00a3690 24004484 000ffa45 GPR08: 0001 c0d10ed8 00ff GPR12: 90121033 c7a3ce00 c00ff596ff90 GPR16: c0047840 c0047810 c11b5380 GPR20: 0800 c1722484 002a GPR24: 00a8 0007 0007 GPR28: c161d270 c00ffb666fd8 c161d528 0007 [Wed Apr 4 13:38:25 2018] NIP [c00a3ca4] power9_idle_type+0x24/0x40 [Wed Apr 4 13:38:25 2018] LR [c00a3ca4] power9_idle_type+0x24/0x40 [Wed Apr 4 13:38:25 2018] Call Trace: [Wed Apr 4 13:38:25 2018] [c00ff596fda0] [c00a3ca4] power9_idle_type+0x24/0x40 (unreliable) [Wed Apr 4 13:38:25 2018] [c00ff596fdc0] [c0ad1240] stop_loop+0x40/0x5c [Wed Apr 4 13:38:25 2018] [c00ff596fdf0] [c0acd9a4] cpuidle_enter_state+0xa4/0x450 [Wed Apr 4 13:38:25 2018]
[Kernel-packages] [Bug 1770849] Comment bridged from LTC Bugzilla
--- Comment From cdead...@us.ibm.com 2018-06-20 17:20 EDT--- @pridhiviraj Hello Pridhiviraj, can this issue be closed now? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1770849 Title: Ubuntu 18.04 kernel crashed while in degraded mode Status in The Ubuntu-power-systems project: Fix Released Status in linux package in Ubuntu: Fix Released Status in linux source package in Bionic: Fix Released Bug description: == SRU Justification == IBM reports a kernel crash with Bionic while in degraded mode(Degraded cores). IBM created a patch to resolve this bug and has submitted it upstream: https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-May/172835.html The patch has not landed in mainline as of yet, so it is being submitted as a SAUCE patch. == Fix == UBUNTU: SAUCE: powerpc/perf: Fix memory allocation for core-imc based on num_possible_cpus() == Regression Potential == Low. Limited to powerpc. == Test Case == A test kernel was built with this patch and tested by the original bug reporter. The bug reporter states the test kernel resolved the bug. kernel crash The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes [ 64.713154] kexec_core: Starting new kernel [ 156.281504630,5] OPAL: Switch to big-endian OS [ 158.440263459,5] OPAL: Switch to little-endian OS [1.889211] Unable to handle kernel paging request for data at address 0x678e549df9e2878c [1.889289] Faulting instruction address: 0xc038aa30 [1.889344] Oops: Kernel access of bad area, sig: 11 [#1] [1.889386] LE SMP NR_CPUS=2048 NUMA PowerNV [1.889432] Modules linked in: [1.889468] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-20-generic #21-Ubuntu [1.889545] NIP: c038aa30 LR: c038aa1c CTR: [1.889608] REGS: c03fed193840 TRAP: 0380 Not tainted (4.15.0-20-generic) [1.889670] MSR: 90009033 CR: 28000884 XER: 2004 [1.889742] CFAR: c0016e1c SOFTE: 1 [1.889742] GPR00: c038a914 c03fed193ac0 c16eae00 0001 [1.889742] GPR04: c03fd754c7f8 002c 0001 002b [1.889742] GPR08: 678e549df9e28874 fffe [1.889742] GPR12: 28000888 cfa82100 c000d3b8 [1.889742] GPR16: [1.889742] GPR20: a78e54a22eb64f8c [1.889742] GPR24: c03fd754c800 678e549df9e2878c 0300 c02bd05c [1.889742] GPR28: c03fed01ea00 014080c0 c03fd754c800 c03fed01ea00 [1.890286] NIP [c038aa30] kmem_cache_alloc_trace+0x2d0/0x330 [1.890340] LR [c038aa1c] kmem_cache_alloc_trace+0x2bc/0x330 [1.890391] Call Trace: [1.890416] [c03fed193ac0] [c038a914] kmem_cache_alloc_trace+0x1b4/0x330 (unreliable) [1.890491] [c03fed193b30] [c02bd05c] pmu_dev_alloc+0x3c/0x170 [1.890547] [c03fed193bb0] [c10e3210] perf_event_sysfs_init+0x8c/0xf0 [1.890611] [c03fed193c40] [c000d144] do_one_initcall+0x64/0x1d0 [1.890676] [c03fed193d00] [c10b4400] kernel_init_freeable+0x280/0x374 [1.890740] [c03fed193dc0] [c000d3d4] kernel_init+0x24/0x160 [1.890795] [c03fed193e30] [c000b528] ret_from_kernel_thread+0x5c/0xb4 [1.890857] Instruction dump: [1.890909] 7c97ba78 fb210038 38a50001 7f19ba78 fb29 f8aa 4bc8c3f1 6000 [1.890978] 7fb8b840 419e0028 e93f0022 e91f0140 <7d59482a> 7d394a14 7d4a4278 7fa95040 [1.891050] ---[ end trace 41b3fe7a827f3888 ]--- [2.900027] [3.900175] Kernel panic - not syncing: Attempted to kill init! exitcode=0x000b [3.900175] [4.71868[ 175.340944355,5] OPAL: Reboot request... 2] Rebooting in 10 seconds.. This fix is needed to resolve the crash https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-May/172835.html To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-power-systems/+bug/1770849/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1761856] Re: kata-containers: netlink protocol not supported
** Also affects: linux-kvm (Ubuntu Bionic) Importance: Undecided Status: New ** Changed in: linux-kvm (Ubuntu Bionic) Assignee: (unassigned) => Kamal Mostafa (kamalmostafa) ** Changed in: linux-kvm (Ubuntu Bionic) Status: New => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-kvm in Ubuntu. https://bugs.launchpad.net/bugs/1761856 Title: kata-containers: netlink protocol not supported Status in linux-kvm package in Ubuntu: Confirmed Status in linux-kvm source package in Bionic: Fix Committed Bug description: Kata container agent is not able to configure the network inside the container level=error msg="update interface request failed" arch=amd64 error="rpc error: code = Unknown desc = protocol not supported" interface-requested="device:\"eth0\" name:\"eth0\" IPAddresses: mtu:1500 hwAddr:\"02:42:ac:11:00:02\" " name=kata-runtime pid=29665 resulting- interface="" source=virtcontainers subsystem=kata_agent To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-kvm/+bug/1761856/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1761854] Re: kata-containers: Cannot open root device "pmem0p1"
** Also affects: linux-kvm (Ubuntu Bionic) Importance: Undecided Status: New ** Changed in: linux-kvm (Ubuntu Bionic) Status: New => Fix Committed ** Changed in: linux-kvm (Ubuntu Bionic) Assignee: (unassigned) => Kamal Mostafa (kamalmostafa) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-kvm in Ubuntu. https://bugs.launchpad.net/bugs/1761854 Title: kata-containers: Cannot open root device "pmem0p1" Status in linux-kvm package in Ubuntu: New Status in linux-kvm source package in Bionic: Fix Committed Bug description: Cannot run kata containers on Ubuntu linux KVM level=info msg="VFS: Cannot open root device \"pmem0p1\" or unknown-block(0,0): error -6\n" name=kata-proxy pid=17025 source=agent level=info msg="Please append a correct \"root=\" boot option; here are the available partitions:\n" name=kata-proxy pid=17025 source=agent level=info msg="01004096 ram0 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="01014096 ram1 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="01024096 ram2 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="01034096 ram3 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="01044096 ram4 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="01054096 ram5 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="01064096 ram6 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="01074096 ram7 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="01084096 ram8 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="01094096 ram9 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="010a4096 ram10 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="010b4096 ram11 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="010c4096 ram12 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="010d4096 ram13 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="010e4096 ram14 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="010f4096 ram15 \n" name=kata-proxy pid=17025 source=agent level=info msg=" (driver?)\n" name=kata-proxy pid=17025 source=agent level=info msg="Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)\n" name=kata-proxy pid=17025 source=agent level=info msg="Kernel Offset: 0x3c40 from 0x8100 (relocation range: 0x8000-0xbfff)\n" name=kata-proxy pid=17025 source=agent level=info msg="Rebooting in 1 seconds..\n" name=kata-proxy pid=17025 source=agent To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-kvm/+bug/1761854/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1777127] Re: kata-containers: enable memory hotplug
** Also affects: linux-kvm (Ubuntu Bionic) Importance: Undecided Status: New ** Changed in: linux-kvm (Ubuntu Bionic) Status: New => Fix Committed ** Changed in: linux-kvm (Ubuntu Bionic) Assignee: (unassigned) => Kamal Mostafa (kamalmostafa) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-kvm in Ubuntu. https://bugs.launchpad.net/bugs/1777127 Title: kata-containers: enable memory hotplug Status in linux-kvm package in Ubuntu: New Status in linux-kvm source package in Bionic: Fix Committed Bug description: Kata containers need memory hotplug support in the guest kernel, since container's resources can be updated dynamically To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-kvm/+bug/1777127/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1759723] Re: ISST-LTE:KVM:Ubuntu18.04:BostonLC:boslcp3:boslcp3g3:Guest conosle hangs after hotplug CPU add operation.
** Tags removed: verification-needed-bionic ** Tags added: verification-done-bionic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1759723 Title: ISST-LTE:KVM:Ubuntu18.04:BostonLC:boslcp3:boslcp3g3:Guest conosle hangs after hotplug CPU add operation. Status in The Ubuntu-power-systems project: Fix Committed Status in linux package in Ubuntu: Fix Released Status in linux source package in Bionic: Fix Committed Bug description: Problem Description: === Performed HOTPLUG cpu attach operation for the guest and guest console becomes unresponsive. Steps to re-create: == 1. updated boslcp3 host BMC :116 & PNOR: 20180302 levels 2. Installed Ubuntu1804 on boslcp3 host & guests with trap issue fixes root@boslcp3:/home# uname -a Linux boslcp3 4.15.0-12-generic #13+leo20180320 SMP Tue Mar 20 13:10:42 CDT 2018 ppc64le ppc64le ppc64le GNU/Linux root@boslcp3:/home# uname -r 4.15.0-12-generic root@boslcp3g3:/kte/tools/setup.d# uname -a Linux boslcp3g3 4.15.0-12-generic #13+leo20180320 SMP Tue Mar 20 13:10:42 CDT 2018 ppc64le ppc64le ppc64le GNU/Linux root@boslcp3g3:/kte/tools/setup.d# uname -r 4.15.0-12-generic 3. Started HTX & stress-ng for on guest for 10-15 min 4. Cleaned up the tests to perform hot-plug and ensure enough memory and cpu was there (killed all Process using kill) 5. Performed cpu hot-plug and guest went into hung state Before Hotplug: root@boslcp3:~# virsh dumpxml boslcp3g3 | grep vcpu 64 root@boslcp3:~# 6. After this operation, guest becomes unrepsonsive as below root@boslcp3g3:~# [ 3626.140773] INFO: task jbd2/vda2-8:584 blocked for more than 120 seconds. [ 3626.146375] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.146457] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3626.146624] INFO: task systemd-journal:665 blocked for more than 120 seconds. [ 3626.146699] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.146768] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3626.146939] INFO: task rs:main Q:Reg:1995 blocked for more than 120 seconds. [ 3626.147016] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.147088] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3626.147285] INFO: task kworker/u128:2:57691 blocked for more than 120 seconds. [ 3626.147361] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.147434] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3626.147622] INFO: task smbd:1449 blocked for more than 120 seconds. [ 3626.147686] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.147760] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3626.147875] INFO: task smbd:1452 blocked for more than 120 seconds. [ 3626.147937] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.148010] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3626.148110] INFO: task smbd:1454 blocked for more than 120 seconds. [ 3626.148173] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.148245] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3626.148344] INFO: task cron:1461 blocked for more than 120 seconds. [ 3626.148406] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.148488] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. root@boslcp3g3:~# root@boslcp3g3:~# ps -ef | grep stress-ng [ 3746.978098] INFO: task jbd2/vda2-8:584 blocked for more than 120 seconds. [ 3746.978221] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3746.978301] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3746.978447] INFO: task systemd-journal:665 blocked for more than 120 seconds. [ 3746.978534] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3746.978607] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4446.361899] systemd[1]: Failed to start Journal Service. [ 4897.632142] systemd[1]: Failed to start Journal Service. ^Z ^X ^C ^Z ^X ^C 7. ping to
[Kernel-packages] [Bug 1775764] Re: Unable to switch VTs - screen frozen
** Changed in: linux (Ubuntu Bionic) Status: Incomplete => Triaged ** Changed in: linux (Ubuntu) Status: Confirmed => Triaged -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1775764 Title: Unable to switch VTs - screen frozen Status in linux package in Ubuntu: Triaged Status in linux source package in Bionic: Triaged Bug description: Prior to doing any Gnome Shell development I always disable the existing instance by dropping back to a non-graphical runlevel: sudo systemctl start multi-user.target At least half the time this works. But the other half the time the screen freezes and I am not able to interact with it or switch VTs. Even a remote login can't force a VT switch: sudo chvt 4 # just hangs The kernel log shows no errors at all. ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: linux-image-4.15.0-22-generic 4.15.0-22.24 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Uname: Linux 4.15.0-22-generic x86_64 ApportVersion: 2.20.10-0ubuntu3 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/hwC0D2', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D9p', '/dev/snd/pcmC0D8p', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D2c', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/controlC0', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Date: Fri Jun 8 13:21:38 2018 InstallationDate: Installed on 2018-05-26 (12 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Alpha amd64 (20180525) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 17ef:6009 Lenovo ThinkPad Keyboard with TrackPoint Bus 001 Device 003: ID 045e:0047 Microsoft Corp. IntelliMouse Explorer 3.0 Bus 001 Device 002: ID 8087:0a2b Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: LENOVO 10M7CTO1WW ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_AU.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-22-generic root=UUID=d7ecc709-02c2-4413-b7e7-dfce1d2b3703 ro quiet splash vt.handoff=1 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.15.0-22-generic N/A linux-backports-modules-4.15.0-22-generic N/A linux-firmware 1.174 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/06/2018 dmi.bios.vendor: LENOVO dmi.bios.version: M16KT47A dmi.board.name: 3102 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40709 WIN 3259627060530 dmi.chassis.type: 3 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrM16KT47A:bd02/06/2018:svnLENOVO:pn10M7CTO1WW:pvrThinkCentreM710s:rvnLENOVO:rn3102:rvrSDK0J40709WIN3259627060530:cvnLENOVO:ct3:cvrNone: dmi.product.family: ThinkCentre M710s dmi.product.name: 10M7CTO1WW dmi.product.version: ThinkCentre M710s dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1775764/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1771467] Re: Reboot/shutdown kernel panic on HP DL360/DL380 Gen9 w/ bionic 4.15.0
** Changed in: linux (Ubuntu)
Status: Triaged => In Progress
** Changed in: linux (Ubuntu Bionic)
Status: Triaged => In Progress
** Changed in: linux (Ubuntu)
Assignee: (unassigned) => Joseph Salisbury (jsalisbury)
** Changed in: linux (Ubuntu Bionic)
Assignee: (unassigned) => Joseph Salisbury (jsalisbury)
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1771467
Title:
Reboot/shutdown kernel panic on HP DL360/DL380 Gen9 w/ bionic 4.15.0
Status in Linux:
Unknown
Status in linux package in Ubuntu:
In Progress
Status in linux source package in Bionic:
In Progress
Bug description:
Verified on multiple DL360 Gen9 servers with up to date firmware.
Just before reboot or shutdown, there is the following panic:
[ 289.093083] {1}[Hardware Error]: Hardware error from APEI Generic Hardware
Error Source: 1
[ 289.093085] {1}[Hardware Error]: event severity: fatal
[ 289.093087] {1}[Hardware Error]: Error 0, type: fatal
[ 289.093088] {1}[Hardware Error]: section_type: PCIe error
[ 289.093090] {1}[Hardware Error]: port_type: 4, root port
[ 289.093091] {1}[Hardware Error]: version: 1.16
[ 289.093093] {1}[Hardware Error]: command: 0x6010, status: 0x0143
[ 289.093094] {1}[Hardware Error]: device_id: :00:01.0
[ 289.093095] {1}[Hardware Error]: slot: 0
[ 289.093096] {1}[Hardware Error]: secondary_bus: 0x03
[ 289.093097] {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2f02
[ 289.093098] {1}[Hardware Error]: class_code: 040600
[ 289.093378] {1}[Hardware Error]: bridge: secondary_status: 0x2000,
control: 0x0003
[ 289.093380] {1}[Hardware Error]: Error 1, type: fatal
[ 289.093381] {1}[Hardware Error]: section_type: PCIe error
[ 289.093382] {1}[Hardware Error]: port_type: 4, root port
[ 289.093383] {1}[Hardware Error]: version: 1.16
[ 289.093384] {1}[Hardware Error]: command: 0x6010, status: 0x0143
[ 289.093386] {1}[Hardware Error]: device_id: :00:01.0
[ 289.093386] {1}[Hardware Error]: slot: 0
[ 289.093387] {1}[Hardware Error]: secondary_bus: 0x03
[ 289.093388] {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2f02
[ 289.093674] {1}[Hardware Error]: class_code: 040600
[ 289.093676] {1}[Hardware Error]: bridge: secondary_status: 0x2000,
control: 0x0003
[ 289.093678] Kernel panic - not syncing: Fatal hardware error!
[ 289.093745] Kernel Offset: 0x1cc0 from 0x8100 (relocation
range: 0x8000-0xbfff)
[ 289.105835] ERST: [Firmware Warn]: Firmware does not respond in time.
It does eventually restart after this. Then during the subsequent
POST, the following warning appears:
Embedded RAID 1 : Smart Array P440ar Controller - (2048 MB, V6.30) 7 Logical
Drive(s) - Operation Failed
- 1719-Slot 0 Drive Array - A controller failure event occurred prior
to this power-up. (Previous lock up code = 0x13) Action: Install the
latest controller firmware. If the problem persists, replace the
controller.
The latter's symptoms are described in
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04805565
but the running storage controller firmware is much newer than the
doc's resolution.
Neither of these problems occur during shutdown/reboot on the xenial
kernel.
FWIW, when running on old P89 (1.50 (07/20/2015) vs 2.56
(01/22/2018)), the shutdown failure mode was a loop like so:
[529151.035267] NMI: IOCK error (debug interrupt?) for reason 75 on CPU 0.
[529153.222883] Uhhuh. NMI received for unknown reason 25 on CPU 0.
[529153.222884] Do you have a strange power saving mode enabled?
[529153.222884] Dazed and confused, but trying to continue
[529153.554447] Uhhuh. NMI received for unknown reason 25 on CPU 0.
[529153.554448] Do you have a strange power saving mode enabled?
[529153.554449] Dazed and confused, but trying to continue
[529153.554450] Uhhuh. NMI received for unknown reason 25 on CPU 0.
[529153.554451] Do you have a strange power saving mode enabled?
[529153.554452] Dazed and confused, but trying to continue
[529153.554452] Uhhuh. NMI received for unknown reason 25 on CPU 0.
[529153.554453] Do you have a strange power saving mode enabled?
[529153.554454] Dazed and confused, but trying to continue
[529153.554454] Uhhuh. NMI received for unknown reason 35 on CPU 0.
[529153.554455] Do you have a strange power saving mode enabled?
[529153.554456] Dazed and confused, but trying to continue
[529153.554457] Uhhuh. NMI received for unknown reason 25 on CPU 0.
[529153.554458] Do you have a strange power saving mode enabled?
[529153.554458] Dazed and confused, but trying to continue
[529153.554459] Uhhuh. NMI received for unknown reason 25 on CPU 0.
[529153.554460] Do you have a strange power saving mode enabled?
[Kernel-packages] [Bug 1776319] Re: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00
Did this issue start happening after an update/upgrade? Was there a prior kernel version where you were not having this particular problem? Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v4.17 kernel[0]. If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'. Once testing of the upstream kernel is complete, please mark this bug as "Confirmed". Thanks in advance. [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.18-rc1 ** Changed in: linux (Ubuntu) Importance: Undecided => Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776319 Title: mmcblk3: error -110 sending stop command, original cmd response 0x900, card status 0xd00 Status in linux package in Ubuntu: Incomplete Bug description: trying to install Lubuntu SD drive (/dev/mmcblk3p1). This is the 2nd time install failed. The internal solid state drive (/dev/mmcblk1) has 4 pre-installed partitions. The first partition is 100MB and labeled EFI System. The desktop version of Lubunto seems to work okay but I think that's because I added the file bootia32.efi into /EFI/BOOT. Before I added the efi file to that directory any attempt to boot lubuntu into desktop mode (try first) froze the system with no error message. If I first start in desktop mode I can get the install onto the SD card to finish but it still doesn't boot into lubuntu (grub resets the system over and over). I suspect this is because the efi file. I will try to do that myself but I'm learning EFI shells on the fly. If I'm right this issue is a result of the manufacturer intentionally running a 32 bit UEFI firmware to a 64 bit system to thwart linux installations. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 Date: Mon Jun 11 18:07:04 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Lubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776319/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1777744] Re: Bionic 4.15.0-23-generic on ppc64 kernel panic's during PXE boot
** Changed in: linux (Ubuntu) Importance: Undecided => High ** Also affects: linux (Ubuntu Bionic) Importance: Undecided Status: New ** Changed in: linux (Ubuntu) Status: Confirmed => Triaged ** Changed in: linux (Ubuntu Bionic) Status: New => Triaged ** Changed in: linux (Ubuntu Bionic) Importance: Undecided => High ** Tags added: kernel-da-key -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/144 Title: Bionic 4.15.0-23-generic on ppc64 kernel panic's during PXE boot Status in linux package in Ubuntu: Triaged Status in linux source package in Bionic: Triaged Bug description: In the MAAS CI we test ppc64, and in the most recent runs (~from the last 1.5 weeks) the CI started failing with the ppc64le machine never enlisting in MAAS. Once we have looked at this, we noticed that there's a kernel panic when loading the ephemeral environment. This is a regression version the previous kernel, provided that this is a recent issue. Current kernel: 4.15.0-23-generic See console log for details. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/144/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 401202] Re: Resolver ignores ndots option
** Also affects: glibc (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/401202 Title: Resolver ignores ndots option Status in glibc package in Ubuntu: New Status in linux package in Ubuntu: Won't Fix Status in glibc package in Arch Linux: New Status in libc package in Debian: New Bug description: Regardless of ndots option in /etc/resolv.conf, when NXDOMAIN is returned from the DNS server then resolver always try another attempt with the original name extended by what is in search option. For example, if you're looking for very.long.url.nowhere and there is a line "search ubuntu.com" in resolv.conf you will get addres of server very.long.url.nowhere.ubuntu.com if such exists. It is incorrect, it should occurs only for urls having less that ndots option dots in its name. Experienced on Kubuntu 9.04 with linux-image-2.6.28-13-generic kernel package. ProblemType: Bug Architecture: i386 Dependencies: DistroRelease: Ubuntu 9.04 Package: resolvconf None [modified: /var/lib/dpkg/info/resolvconf.list] PackageArchitecture: all ProcEnviron: LANGUAGE= LANG=cs_CZ.UTF-8 SHELL=/bin/bash SourcePackage: resolvconf Uname: Linux 2.6.28-13-generic i686 UnreportableReason: This is not a genuine Ubuntu package To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/glibc/+bug/401202/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1674273] Re: Resolver ignores ndots option
** Changed in: linux (Ubuntu) Status: Confirmed => Invalid ** Changed in: linux (Ubuntu Xenial) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1674273 Title: Resolver ignores ndots option Status in glibc package in Ubuntu: Confirmed Status in linux package in Ubuntu: Invalid Status in glibc source package in Xenial: Confirmed Status in linux source package in Xenial: Invalid Bug description: This is a re-report of https://bugs.launchpad.net/ubuntu/+source/linux/+bug/401202 since that one was apparently closed as no-fix simply because it was too old. This still occurs in xenial. Original description: Regardless of ndots option in /etc/resolv.conf, when NXDOMAIN is returned from the DNS server then resolver always try another attempt with the original name extended by what is in search option. For example, if you're looking for very.long.url.nowhere and there is a line "search ubuntu.com" in resolv.conf you will get addres of server very.long.url.nowhere.ubuntu.com if such exists. It is incorrect, it should occurs only for urls having less that ndots option dots in its name. My system is a standard Ubuntu Xenial desktop amd64 using network manager and the default configured Wired Connection 1 (i.e. DHCP). To reproduce: - sudo install /dev/fd/0 /etc/NetworkManager/dnsmasq.d/domain <<<'log-queries=extra' - sudo killall dnsmasq - ping some.long.non-existent.name - Watch /var/log/syslog In my case: Mar 20 23:19:22 eragon dnsmasq[27367]: 46 127.0.0.1/40646 query[A] some.long.non-existent.name from 127.0.0.1 Mar 20 23:19:22 eragon dnsmasq[27367]: 46 127.0.0.1/40646 forwarded some.long.non-existent.name to 192.168.5.1 Mar 20 23:19:22 eragon dnsmasq[27367]: 46 127.0.0.1/40646 reply some.long.non-existent.name is NXDOMAIN Mar 20 23:19:22 eragon dnsmasq[27367]: 47 127.0.0.1/52417 query[A] some.long.non-existent.name.sebunger.dnsalias.org from 127.0.0.1 Mar 20 23:19:22 eragon dnsmasq[27367]: 47 127.0.0.1/52417 forwarded some.long.non-existent.name.sebunger.dnsalias.org to 192.168.5.1 Mar 20 23:19:23 eragon dnsmasq[27367]: 47 127.0.0.1/52417 reply some.long.non-existent.name.sebunger.dnsalias.org is Mar 20 23:19:23 eragon dnsmasq[27367]: 47 127.0.0.1/52417 reply sebunger.dnsalias.org is 203.173.156.30 My /etc/resolv.conf (which is a sym-link to ../run/resolvconf/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 127.0.1.1 search sebunger.dnsalias.org options ndots:1 (I added the options ndots with no effect) --- ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-id', '/dev/snd/by-path', '/dev/snd/pcmC1D0c', '/dev/snd/controlC1', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D2c', '/dev/snd/pcmC0D1c', '/dev/snd/pcmC0D1p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/controlC0', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 16.04 EcryptfsInUse: Yes IwConfig: enp2s0no wireless extensions. lono wireless extensions. MachineType: Gigabyte Technology Co., Ltd. GA-MA770-UD3 NonfreeKernelModules: nvidia_uvm nvidia Package: linux (not installed) ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-66-generic root=/dev/mapper/vg0-root ro rootdelay=120 quiet splash ProcVersionSignature: Ubuntu 4.4.0-66.87-generic 4.4.44 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-66-generic N/A linux-backports-modules-4.4.0-66-generic N/A linux-firmware1.157.8 RfKill: Tags: xenial xenial Uname: Linux 4.4.0-66-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dialout dip floppy kvm lpadmin plugdev sambashare ssh sudo users video _MarkForUpload: True dmi.bios.date: 06/12/2009 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: FB dmi.board.name: GA-MA770-UD3 dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrFB:bd06/12/2009:svnGigabyteTechnologyCo.,Ltd.:pnGA-MA770-UD3:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-MA770-UD3:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: GA-MA770-UD3 dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/glibc/+bug/1674273/+subscriptions -- Mailing list:
[Kernel-packages] [Bug 1777863] Re: [drm:intel_wait_ddi_buf_idle [i915]] *ERROR* Timeout waiting for DDI BUF C idle bit
Did this issue start happening after an update/upgrade? Was there a prior kernel version where you were not having this particular problem? Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v4.17 kernel[0]. If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'. Once testing of the upstream kernel is complete, please mark this bug as "Confirmed". Thanks in advance. [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.18-rc1 ** Changed in: linux (Ubuntu) Importance: Undecided => Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1777863 Title: [drm:intel_wait_ddi_buf_idle [i915]] *ERROR* Timeout waiting for DDI BUF C idle bit Status in linux package in Ubuntu: Incomplete Bug description: System reboot. This could be related to putting the NB back into the docking station. Search for [ cut here ] to find the final error message before reboot. Linux mymachine4 4.15.0-23-generic #25-Ubuntu SMP Wed May 23 18:02:16 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux Jun 20 12:05:00 mymachine /usr/lib/gdm3/gdm-x-session[4443]: (II) modeset(0): Using vrefresh ranges from config file Jun 20 12:05:00 mymachine /usr/lib/gdm3/gdm-x-session[4443]: (II) modeset(0): Printing DDC gathered Modelines: Jun 20 12:05:00 mymachine /usr/lib/gdm3/gdm-x-session[4443]: (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) Jun 20 12:05:00 mymachine /usr/lib/gdm3/gdm-x-session[4443]: (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) Jun 20 12:05:00 mymachine /usr/lib/gdm3/gdm-x-session[4443]: (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) Jun 20 12:05:00 mymachine /usr/lib/gdm3/gdm-x-session[4443]: (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) Jun 20 12:05:00 mymachine /usr/lib/gdm3/gdm-x-session[4443]: (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) Jun 20 12:05:00 mymachine /usr/lib/gdm3/gdm-x-session[4443]: (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) Jun 20 12:05:00 mymachine /usr/lib/gdm3/gdm-x-session[4443]: (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) Jun 20 12:05:00 mymachine /usr/lib/gdm3/gdm-x-session[4443]: (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) Jun 20 12:05:00 mymachine /usr/lib/gdm3/gdm-x-session[4443]: (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) Jun 20 12:05:00 mymachine /usr/lib/gdm3/gdm-x-session[4443]: (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) Jun 20 12:05:00 mymachine /usr/lib/gdm3/gdm-x-session[4443]: (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) Jun 20 12:05:00 mymachine /usr/lib/gdm3/gdm-x-session[4443]: (II) modeset(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e) Jun 20 12:05:00 mymachine /usr/lib/gdm3/gdm-x-session[4443]: (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e) Jun 20 12:05:18 mymachine kernel: [drm:intel_wait_ddi_buf_idle [i915]] *ERROR* Timeout waiting for DDI BUF C idle bit Jun 20 12:05:18 mymachine kernel: [ cut here ] Jun 20 12:05:18 mymachine kernel: vblank wait timed out on crtc 2 Jun 20 12:05:18 mymachine kernel: WARNING: CPU: 2 PID: 4445 at /build/linux-uT8zSN/linux-4.15.0/drivers/gpu/drm/drm_vblank.c:1073 drm_wait_one_vblank+0x181/0x190 [drm] Jun 20 12:05:18 mymachine kernel: Modules linked in: msr rfcomm ccm veth nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo br_netfilter bridge stp llc overlay thunderbolt cmac bnep btusb btrtl btbcm uvcvideo Jun 20 12:05:18 mymachine kernel: intel_cstate mac80211 intel_rapl_perf snd_compress ac97_bus snd_pcm_dmaengine snd_seq_midi snd_seq_midi_event snd_hda_intel snd_rawmidi snd_hda_codec snd_hda_core snd_hwdep i Jun 20 12:05:18 mymachine kernel: pps_core drm nvme_core wmi video Jun 20 12:05:18 mymachine kernel: CPU: 2 PID: 4445 Comm: Xorg Tainted: G W4.15.0-23-generic #25-Ubuntu Jun 20
[Kernel-packages] [Bug 1777822] Re: Updating Nvidia drivers causes Cinnamon crashes and seems to be in fallback mode
*** This bug is a duplicate of bug 1777820 *** https://bugs.launchpad.net/bugs/1777820 ** This bug has been marked a duplicate of bug 1777820 Updating Nvidia drivers causes Cinnamon crashes and seems to be in fallback mode -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1777822 Title: Updating Nvidia drivers causes Cinnamon crashes and seems to be in fallback mode Status in linux package in Ubuntu: Incomplete Bug description: I'm using Linux Mint 18.3 Syliva. Installing Nvidia drivers causes Cinnamon to crash and seems to be in fallback mode in Kernel 4.13 and above. I had to downgrade my kernel back to 4.10 for it to work. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1777822/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1759723] Comment bridged from LTC Bugzilla
--- Comment From jos...@br.ibm.com 2018-06-20 15:22 EDT--- Hello, >From the the development side it looks very good: both hotplug and hot unplug are working good. Thank you very much, Ziviani -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1759723 Title: ISST-LTE:KVM:Ubuntu18.04:BostonLC:boslcp3:boslcp3g3:Guest conosle hangs after hotplug CPU add operation. Status in The Ubuntu-power-systems project: Fix Committed Status in linux package in Ubuntu: Fix Released Status in linux source package in Bionic: Fix Committed Bug description: Problem Description: === Performed HOTPLUG cpu attach operation for the guest and guest console becomes unresponsive. Steps to re-create: == 1. updated boslcp3 host BMC :116 & PNOR: 20180302 levels 2. Installed Ubuntu1804 on boslcp3 host & guests with trap issue fixes root@boslcp3:/home# uname -a Linux boslcp3 4.15.0-12-generic #13+leo20180320 SMP Tue Mar 20 13:10:42 CDT 2018 ppc64le ppc64le ppc64le GNU/Linux root@boslcp3:/home# uname -r 4.15.0-12-generic root@boslcp3g3:/kte/tools/setup.d# uname -a Linux boslcp3g3 4.15.0-12-generic #13+leo20180320 SMP Tue Mar 20 13:10:42 CDT 2018 ppc64le ppc64le ppc64le GNU/Linux root@boslcp3g3:/kte/tools/setup.d# uname -r 4.15.0-12-generic 3. Started HTX & stress-ng for on guest for 10-15 min 4. Cleaned up the tests to perform hot-plug and ensure enough memory and cpu was there (killed all Process using kill) 5. Performed cpu hot-plug and guest went into hung state Before Hotplug: root@boslcp3:~# virsh dumpxml boslcp3g3 | grep vcpu 64 root@boslcp3:~# 6. After this operation, guest becomes unrepsonsive as below root@boslcp3g3:~# [ 3626.140773] INFO: task jbd2/vda2-8:584 blocked for more than 120 seconds. [ 3626.146375] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.146457] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3626.146624] INFO: task systemd-journal:665 blocked for more than 120 seconds. [ 3626.146699] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.146768] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3626.146939] INFO: task rs:main Q:Reg:1995 blocked for more than 120 seconds. [ 3626.147016] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.147088] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3626.147285] INFO: task kworker/u128:2:57691 blocked for more than 120 seconds. [ 3626.147361] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.147434] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3626.147622] INFO: task smbd:1449 blocked for more than 120 seconds. [ 3626.147686] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.147760] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3626.147875] INFO: task smbd:1452 blocked for more than 120 seconds. [ 3626.147937] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.148010] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3626.148110] INFO: task smbd:1454 blocked for more than 120 seconds. [ 3626.148173] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.148245] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3626.148344] INFO: task cron:1461 blocked for more than 120 seconds. [ 3626.148406] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3626.148488] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. root@boslcp3g3:~# root@boslcp3g3:~# ps -ef | grep stress-ng [ 3746.978098] INFO: task jbd2/vda2-8:584 blocked for more than 120 seconds. [ 3746.978221] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3746.978301] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3746.978447] INFO: task systemd-journal:665 blocked for more than 120 seconds. [ 3746.978534] Tainted: GW4.15.0-12-generic #13+leo20180320 [ 3746.978607] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4446.361899] systemd[1]: Failed to start Journal
[Kernel-packages] [Bug 1776005] Re: kernel instability with BTRFS filesystem as rootfs
Hello Joseph, I have tested the kernel you kindly provide in #5 but this not resolves the issue on all laptop which have trouble. What I said in #4 is partial and not resolves the issue on all test cases. Sorry for this wrong interpretation, but the cases are quite complicated. I have hidden some useless comments of my own that can disrupt the reading of this bug report. Thanks for your time, Sylvain -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776005 Title: kernel instability with BTRFS filesystem as rootfs Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Hello, As explained yesterday on #ubuntu-kernel, several laptop won't boot (kernel panic) with the latest kernel 4.4.0-127-generic (x86_64) and upper (proposed 4.4.0-128-generic), on Xenial 16.04 LTS I have made many tests to verify that the bootloader (GRUB) is correctly configured (I have also reinstall it, but same result). I have also verified the BTRFS system is clean and not corrupted (with a livecd). The behavior is unpredictable, because often the kernel fall in "panic" during boot, but not all the time, if i do several consecutive reboot to test stability of the boot "process". I have no search behavior with previous kernels (like 4.4.0-124-generic). I suspect (even if I'm quiet disturbed by this behavior, maybe I wrong) that something I changed on last kernel: - on BTRFS subsystem, I have "aggregate" BTRFS partitions as rootfs (for a long time) - something related with the last mitigation about the recent security processor breach But my skills stop here, and I'm not able to find the origin of this behavior despite my efforts. I can continue my investigation if I have some additional pointers. Thanks for your time, Sylvain To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776005/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1777257] Re: Dell Inspiron 17r 5737 Ubuntu 18.04 Video Looks Very Strange
Merlin: I) The scope of LP#1300349 is how a pre-3.18-rc4 kernel had an issue, which 3.18-rc4 fixed. However, you are using a 4.15 kernel. Hence, the scope and root cause are different (i.e. not relevant). II) In order to allow additional upstream mainline kernel developers to examine the issue, at your earliest convenience, could you please test the latest mainline kernel? Please keep in mind the following: 1) The one to test is in a folder at the very top of the page (not the daily folder). 2) The release names are irrelevant. 3) The folder time stamps aren't indicative of when the kernel actually was released upstream. 4) Install instructions are available at https://wiki.ubuntu.com/Kernel/MainlineBuilds . If testing on your main install would be inconvenient, one may: 1) Install Ubuntu to a different partition and then test this there. 2) Backup, or clone the primary install. If the latest kernel did not allow you to test to the issue (ex. you couldn't boot into the OS) please make a comment in your report about this, and continue to test the next most recent kernel version until you can test to the issue. Once you've tested the mainline kernel, please comment on which kernel version specifically you tested. If this issue is not reproducible in the mainline kernel, please add the following tags by clicking on the yellow circle with a black pencil icon, next to the word Tags, located at the bottom of the Bug Description: kernel-fixed-upstream kernel-fixed-upstream-X.Y-rcZ Where X, and Y are the first two numbers of the kernel version, and Z is the release candidate number if it exists. If the issue is reproducible with the mainline kernel, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-X.Y-rcZ Please note, an error to install the kernel does not fit the criteria of kernel-bug-exists-upstream. Also, you don't need to apport-collect further unless specifically requested to do so. It is most helpful that after testing of the latest mainline kernel is complete, you mark this report Status Confirmed. Lastly, to keep this issue relevant to upstream, please continue to test the latest mainline kernel as it becomes available. Thank you for your help. ** Description changed: When booting 18.04 on my Dell 5737 built-in screen the colours are incorrect and the display looks to be of low resolution. This is true whether booting from a fresh distribution copy on a memory stick or the subsequent patched install. A screenshot: https://launchpadlibrarian.net/374791190/2018-06-16%2016.46.54.jpg - The image on an external monitor appears unaffected. + The image on an external monitor is fine, and unplugging the external + monitor doesn't change anything. WORKAROUND: Use kernel parameter: nomodeset --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: merlin 1635 F pulseaudio /dev/snd/controlC1: merlin 1635 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-04-28 (52 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Dell Inc. Inspiron 5737 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=649ad923-d0b7-420a-a0e8-c5753dea246c ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-23-generic N/A linux-backports-modules-4.15.0-23-generic N/A linux-firmware 1.173.1 Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/25/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A09 dmi.board.name: 0V3MXK dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A09 dmi.modalias: dmi:bvnDellInc.:bvrA09:bd08/25/2016:svnDellInc.:pnInspiron5737:pvrA09:rvnDellInc.:rn0V3MXK:rvrA00:cvnDellInc.:ct8:cvrA09: dmi.product.family: 00 dmi.product.name: Inspiron 5737 dmi.product.version: A09 dmi.sys.vendor: Dell Inc. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1777257 Title: Dell Inspiron 17r 5737 Ubuntu 18.04 Video Looks Very Strange Status in linux package in Ubuntu: Incomplete Bug description: When booting 18.04 on my Dell 5737 built-in screen the colours are incorrect and the display looks to be of low resolution. This
[Kernel-packages] [Bug 1247723] Re: [Samsung NP900X3C-A02US] Lid state changes not detected
Could you please advise what supported release you have reproduced this in? ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1247723 Title: [Samsung NP900X3C-A02US] Lid state changes not detected Status in Linux: Confirmed Status in linux package in Ubuntu: Incomplete Bug description: Neither lid open nor lid close events are detected on Samsung 900X3C laptop. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-12-generic 3.11.0-12.19 [modified: boot/vmlinuz-3.11.0-12-generic] ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: sahak 1482 F pulseaudio Date: Sun Nov 3 23:11:48 2013 InstallationDate: Installed on 2013-10-26 (8 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) MachineType: SAMSUNG ELECTRONICS CO., LTD. 900X3C/900X3D/900X4C/900X4D MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=366ff628-3319-488f-b6f2-7b1872de5733 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: Nov 3 23:05:26 samsung kernel: [ 5958.261114] perf samples too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 5 dmi.bios.date: 02/08/2013 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: P06AAC dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: SAMSUNG_NP1234567890 dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvrP06AAC:bd02/08/2013:svnSAMSUNGELECTRONICSCO.,LTD.:pn900X3C/900X3D/900X4C/900X4D:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnSAMSUNG_NP1234567890:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 900X3C/900X3D/900X4C/900X4D dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1247723/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1773581] Re: [Samsung NP900X3G-S01US] Horizontal lines after update to 4.13.0-43
** Tags added: kernel-fixed-upstream-4.18-rc1 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1773581 Title: [Samsung NP900X3G-S01US] Horizontal lines after update to 4.13.0-43 Status in linux package in Ubuntu: Triaged Bug description: After updating my Ubuntu 16.04 kernel from 4.13.0-41 to 4.13.0-43, I am seeing horizontal lines on the display. Rebooting into -41 makes them disappear. This is most likely the same problem as seen in 18.04 by another user: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1771204 (also see the attached photo there) ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.13.0-43-generic 4.13.0-43.48~16.04.1 ProcVersionSignature: Ubuntu 4.13.0-43.48~16.04.1-generic 4.13.16 Uname: Linux 4.13.0-43-generic x86_64 NonfreeKernelModules: openafs ApportVersion: 2.20.1-0ubuntu2.17 Architecture: amd64 CurrentDesktop: Unity Date: Sat May 26 22:56:48 2018 InstallationDate: Installed on 2014-05-19 (1468 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) SourcePackage: linux-hwe UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.20.1-0ubuntu2.17 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: fwinkl 2305 F pulseaudio /dev/snd/controlC1: fwinkl 2305 F pulseaudio DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=00a4b15e-a4f1-4b35-9c8a-5ea33b1c6762 InstallationDate: Installed on 2014-05-19 (1468 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) MachineType: SAMSUNG ELECTRONICS CO., LTD. 900X3G NonfreeKernelModules: openafs Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-43-generic root=UUID=ed5ec6cc-07cf-4e98-8b4e-efa0ba2d07a9 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 4.13.0-43.48~16.04.1-generic 4.13.16 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.13.0-43-generic N/A linux-backports-modules-4.13.0-43-generic N/A linux-firmware 1.157.18 Tags: xenial Uname: Linux 4.13.0-43-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/31/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P07ADU.029.141031.PS dmi.board.asset.tag: No Asset Tag dmi.board.name: NP900X3G-S01US dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SAMSUNG_SW_REVISION_1234567890ABCD dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP07ADU.029.141031.PS:bd10/31/2014:svnSAMSUNGELECTRONICSCO.,LTD.:pn900X3G:pvrP07ADU:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP900X3G-S01US:rvrSAMSUNG_SW_REVISION_1234567890ABCD:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A: dmi.product.family: SAMSUNG SENS dmi.product.name: 900X3G dmi.product.version: P07ADU dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1773581/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1775772] Re: Atheros Wireless ath9k random segmentation fault ath9k_cmn_rx_skb_postprocess+0x4b/0x130 [ath9k_common]
Kafabih Rahmat, the issue you are reporting is an upstream one. Could you please report this problem following the instructions at https://wiki.ubuntu.com/Bugs/Upstream/kernel to the appropriate mailing list (TO: QCA ath9k Development and Johannes Berg CC: linux-wireless)? Please provide a direct URL to your post to the mailing list when it becomes available so that it may be tracked. Thank you for your help. ** Changed in: linux (Ubuntu) Status: Incomplete => Triaged -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1775772 Title: Atheros Wireless ath9k random segmentation fault ath9k_cmn_rx_skb_postprocess+0x4b/0x130 [ath9k_common] Status in linux package in Ubuntu: Triaged Bug description: Hello, I got random segmentation fault on my Wireless card Atheros QCA9565 / AR9565 here I also attached dmesg and another logs. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CRDA: global country 98: DFS-UNSET (2402 - 2472 @ 20), (N/A, 20), (N/A) (5735 - 5815 @ 20), (N/A, 23), (N/A) CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-04-14 (64 days ago) InstallationMedia: Kubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: LENOVO 20369 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=a14e83f1-8214-4bdd-a01d-d6cebd312997 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-23-generic N/A linux-backports-modules-4.15.0-23-generic N/A linux-firmware 1.173.1 Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: Upgraded to bionic on 2018-04-27 (50 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/20/2014 dmi.bios.vendor: LENOVO dmi.bios.version: 9ACN29WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Lancer 4A2 dmi.board.vendor: LENOVO dmi.board.version: NANANANANO DPK dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo G40-70 dmi.modalias: dmi:bvnLENOVO:bvr9ACN29WW:bd10/20/2014:svnLENOVO:pn20369:pvrLenovoG40-70:rvnLENOVO:rnLancer4A2:rvrNANANANANODPK:cvnLENOVO:ct10:cvrLenovoG40-70: dmi.product.family: IDEAPAD dmi.product.name: 20369 dmi.product.version: Lenovo G40-70 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1775772/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1777242] Re: 4.15.0-23-generic fails to boot in qemu on amd64 host (kernel panic)
I built a test kernel with a revert of Bionic commit 494f8f20811baf580370f7d65bb7ea615ec37882. The test kernel can be downloaded from: http://kernel.ubuntu.com/~jsalisbury/lp1777242 Can you test this kernel and see if it resolves this bug? Note about installing test kernels: • If the test kernel is prior to 4.15(Bionic) you need to install the linux-image and linux-image-extra .deb packages. • If the test kernel is 4.15(Bionic) or newer, you need to install the linux-modules, linux-modules-extra and linux-image-unsigned .deb packages. Thanks in advance! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1777242 Title: 4.15.0-23-generic fails to boot in qemu on amd64 host (kernel panic) Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: In Progress Bug description: Trying to boot bionic with 4.15.0-23-generic fails with a kernel panic in qemu on an Debian amd64 host. The version of qemu is the current in Debian Testing: 2.12+dfsg-3. Booting with 4.15.0-22-generic works fine. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: zouzou 1274 F pulseaudio CurrentDesktop: ubuntu-communitheme:ubuntu:GNOME DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2017-07-12 (338 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Alpha amd64 (20170710) IwConfig: lono wireless extensions. ens3 no wireless extensions. MachineType: QEMU Standard PC (i440FX + PIIX, 1996) Package: linux-signed (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 qxldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-22-generic root=UUID=26da642a-bbc4-440b-bed3-a911bbbfe582 ro quiet splash ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-22-generic N/A linux-backports-modules-4.15.0-22-generic N/A linux-firmware 1.173.1 RfKill: Tags: bionic Uname: Linux 4.15.0-22-generic x86_64 UpgradeStatus: Upgraded to bionic on 2018-02-07 (128 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 04/01/2014 dmi.bios.vendor: SeaBIOS dmi.bios.version: 1.11.1-1 dmi.chassis.type: 1 dmi.chassis.vendor: QEMU dmi.chassis.version: pc-i440fx-2.8 dmi.modalias: dmi:bvnSeaBIOS:bvr1.11.1-1:bd04/01/2014:svnQEMU:pnStandardPC(i440FX+PIIX,1996):pvrpc-i440fx-2.8:cvnQEMU:ct1:cvrpc-i440fx-2.8: dmi.product.name: Standard PC (i440FX + PIIX, 1996) dmi.product.version: pc-i440fx-2.8 dmi.sys.vendor: QEMU To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1777242/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1777679] Re: ELAN1200 touchpad not working at all with kernel 4.15+; Recognized as ITE 8910 keyboard
Hi Maxime, I never used the kernel parameter acpi-osi=! while I was on 4.17. I will install 4.17.2 to make sure the problem hasn't been solved. I noticed you wrote "elantech touchpad". Elantech is a different touchpad than mine. Cristian mentions the Elan1200 touchpad though which is the right one. Both of your comments make me think the issue is ACPI related. Thanks, will try the very latest kernel, check grub parameters, and get back to you. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1777679 Title: ELAN1200 touchpad not working at all with kernel 4.15+; Recognized as ITE 8910 keyboard Status in linux package in Ubuntu: Confirmed Bug description: Laptop is an Asus-GL503VD Touchpad is an ELAN touchpad model 1200. This bug is relative to the Asus-GL503VD and any Asus laptop using the ELAN1200 touchpad. I tried Arch, Debian, Ubuntu 14/16/18, Pop_OS, Sabayon Linux, Fedora. Same problem, touchpad is totally unresponsive. From what I understand the touchpad is being recognized as a keyboard and I cannot get any driver to recognize it: elan-i2c or synaptics. The touchpad is also being recognized as a USB device. This behaviour was consistent on kernels 4.15.0-22, 4.15.0-23 and 4.17.1. Right now trying to make it work on kernel 4.15.0-23 because it seems more "main-stream". Note: I have a keyboard recognized as AT Translated Set 2 keyboard which makes me believe I do not need ITE8910 to be a keyboard. Note2: Been researching LKM development. Managed to make a signed 'hello world' lkm and make it output in dmesg. Willing to help debug/develop the driver for this touchpad. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ttr1798 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 HibernationDevice: RESUME=UUID=7791e5a6-d685-49b9-93d7-017c1abf4b89 InstallationDate: Installed on 2018-06-10 (9 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. GL503VD NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcEnviron: TERM=screen PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_CA.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=98160487-6d8d-429c-830c-035e5faeb890 ro CONFIG_MODVERSIONS=true nvidia.modeset=1 nouveau.modeset=0 acpi=force i8042.reset i8042.nomux i8042.nopnp i8042.noloop ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-23-generic N/A linux-backports-modules-4.15.0-23-generic N/A linux-firmware 1.173.1 Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip libvirt lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 10/03/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL503VD.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL503VD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL503VD.304:bd10/03/2017:svnASUSTeKCOMPUTERINC.:pnGL503VD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL503VD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.family: GL dmi.product.name: GL503VD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1777679/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
