[Kernel-packages] [Bug 1766201] Re: CTAUTO:DevOps:860.50:devops4fp1:Error occurred during LINUX Dmesg error Checking for all LINUX clients for devops4p10
** Also affects: linux (Ubuntu Cosmic) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Disco) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Bionic) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1766201 Title: CTAUTO:DevOps:860.50:devops4fp1:Error occurred during LINUX Dmesg error Checking for all LINUX clients for devops4p10 Status in The Ubuntu-power-systems project: Incomplete Status in linux package in Ubuntu: Incomplete Status in linux source package in Bionic: New Status in linux source package in Cosmic: New Status in linux source package in Disco: New Bug description: [Impact] The integrity subsystem is still reporting error messages like this at boot: integrity: Unable to open file: /etc/keys/x509_evm.der (-2) In a previous commit we have downgraded this error to warning: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/bionic/commit/?h=master- next=58441dc86d7b066a2c02079829a96035587a7066 (this fix is applied everywhere, not only in bionic) But there's another place (security/integrity/digsig.c) that reports the same error message that should be also downgraded to warning for consistency. [Test Case] No special test case is required, errors are reported at boot if an integrity policy is enabled. [Fix] Downgrade also this error message to a warning. [Regression Potential] It is a one-liner that changes a printk() error message, regression potential is minimal. [Original bug report] == Comment: #0 - Application Cdeadmin - 2018-04-20 05:56:03 == == Comment: #1 - Application Cdeadmin - 2018-04-20 05:56:05 == State: Open by: stccdenv on 18 April 2018 06:27:28 This defect was opened automatically using defect_template with only logs. Please refer to 2nd seq for the problem description. ==Automatic entries== Full Log: http://w3.austin.ibm.com/afs/awd.austin.ibm.com/u/stccdenv/logs/devops4fp1_defect_template_20180418060138 Contact: Thirukumaran V T (thirukuma...@in.ibm.com), Tommy Adams(tnad...@us.ibm.com) Backup: Atit Patel (a...@us.ibm.com) System Name: devops4fp1 FSP IP: 9.3.136.192 (devops4fp1.aus.stglabs.ibm.com) System Firmware Level: Current Side Driver:.fips861/b0413a_1816.861 Non-Current Side Driver:.fips861/b0410a_1816.861 Lpar Access: Please refer https://pcajet.aus.stglabs.ibm.com/ for the lab password. (The Lab Test Passwords are now accessible only through the auto or manual install web apps. For example, from the manual install web app, enter your email address, check the Lab Passwords checkbox and then click on Submit.) (To access the Lpars in 10.33.x.x network, login to any LCB or HMC then ssh/telnet to 10.33.x.x lpars) --- HMC IP: 9.3.118.110 (vhmccloudtst100.aus.stglabs.ibm.com) HMC Version: "version= Version: 9 Release: 1 Service Pack: 910 HMC Build level 1803052221 ","base_version=V9R1 " --- =Logs SNAP : devops4p02: /tmp/ibmsupt/snap.pax.Z.devops4p02.180418060149 and also @ (NFS)9.41.164.242:/fspmount/hmc_dumps/snap.pax.Z.devops4p02.180418060149 /tmp/IBM.DRM.180418060149.tar.gz and also @ (NFS)9.41.164.242:/fspmount/hmc_dumps/IBM.DRM.180418060149.tar.gz.devops4p02 /tmp/htx.180418060149.tar.gz and also @ (NFS)9.41.164.242:/fspmount/hmc_dumps/htx.180418060149.tar.gz.devops4p02 devops4p03: /tmp/ibmsupt/snap.pax.Z.devops4p03.180418060149 and also @ (NFS)9.41.164.242:/fspmount/hmc_dumps/snap.pax.Z.devops4p03.180418060149 /tmp/IBM.DRM.180418060149.tar.gz and also @ (NFS)9.41.164.242:/fspmount/hmc_dumps/IBM.DRM.180418060149.tar.gz.devops4p03 /tmp/htx.180418060149.tar.gz and also @ (NFS)9.41.164.242:/fspmount/hmc_dumps/htx.180418060149.tar.gz.devops4p03 devops4p04: /tmp/ibmsupt/snap.pax.Z.devops4p04.180418060148 and also @ (NFS)9.41.164.242:/fspmount/hmc_dumps/snap.pax.Z.devops4p04.180418060148 /tmp/IBM.DRM.180418060148.tar.gz and also @ (NFS)9.41.164.242:/fspmount/hmc_dumps/IBM.DRM.180418060148.tar.gz.devops4p04 /tmp/htx.180418060148.tar.gz and also @ (NFS)9.41.164.242:/fspmount/hmc_dumps/htx.180418060148.tar.gz.devops4p04 devops4p05: /tmp/ibmsupt/snap.pax.Z.devops4p05.180418060148 and also @ (NFS)9.41.164.242:/fspmount/hmc_dumps/snap.pax.Z.devops4p05.180418060148 /tmp/IBM.DRM.180418060148.tar.gz and also @ (NFS)9.41.164.242:/fspmount/hmc_dumps/IBM.DRM.180418060148.tar.gz.devops4p05 /tmp/htx.180418060148.tar.gz and also @ (NFS)9.41.164.242:/fspmount/hmc_dumps/htx.180418060148.tar.gz.devops4p05 devops4p06:
[Kernel-packages] [Bug 1808116] Re: 4.15 and higher kernels do not read the SD card
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1808116 Title: 4.15 and higher kernels do not read the SD card Status in linux package in Ubuntu: Expired Bug description: 4.15 and higher kernels do not read the SD card. kernel 4.13 reads the SD card. Checked with a 64GB Samsung and 16 GB card from another manufacturer. Also 4.19.8 kernel does not read cards inxi -Fxz System: Host: ASUS Kernel: 4.13.0-45-generic x86_64 (64 bit gcc: 5.4.0) Desktop: KDE Plasma 5.8.9 (Qt 5.6.1) Distro: Linux Mint 18.3 Sylvia Machine: Mobo: ASUSTeK model: E200HA v: 1.0 Bios: American Megatrends v: E200HA.303 date: 12/21/2016 CPU: Quad core Intel Atom x5-Z8350 (-MCP-) cache: 1024 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 11520 clock speeds: max: 1920 MHz 1: 1920 MHz 2: 1920 MHz 3: 486 MHz 4: 505 MHz Graphics: Card: Intel Device 22b0 bus-ID: 00:02.0 Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.06hz GLX Renderer: Mesa DRI Intel HD Graphics (Cherrytrail) GLX Version: 3.0 Mesa 18.0.5 Direct Rendering: Yes Audio: Card Intel HDMI/DP LPE Audio driver: HdmiLpeAudio Sound: ALSA v: k4.13.0-45-generic Network: Card: Qualcomm Atheros Device 0042 driver: ath10k_pci bus-ID: 01:00.0 IF: wlp1s0 state: up speed: N/A duplex: N/A mac: Drives: HDD Total Size: NA (-) ID-1: /dev/mmcblk0 model: N/A size: 31.3GB Partition: ID-1: / size: 25G used: 21G (89%) fs: ext4 dev: /dev/mmcblk0p2 ID-2: swap-1 size: 4.18GB used: 0.00GB (0%) fs: swap dev: /dev/mmcblk0p3 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: System Temperatures: cpu: 40.0C mobo: N/A Fan Speeds (in rpm): cpu: 0 Info: Processes: 225 Uptime: 1 min Memory: 1101.6/3839.9MB Init: systemd runlevel: 5 Gcc sys: 5.4.0 Client: Shell (bash 4.3.481) inxi: 2.2.35 without a SD card inserted dmesg | grep mmc [ 2.994522] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA [ 3.013437] mmc1: SDHCI controller on ACPI [80860F14:03] using ADMA [ 3.323762] mmc0: new HS200 MMC card at address 0001 [ 3.330155] mmcblk0: mmc0:0001 BJNB4R 29.1 GiB [ 3.330320] mmcblk0boot0: mmc0:0001 BJNB4R partition 1 4.00 MiB [ 3.330482] mmcblk0boot1: mmc0:0001 BJNB4R partition 2 4.00 MiB [ 3.330641] mmcblk0rpmb: mmc0:0001 BJNB4R partition 3 4.00 MiB [ 3.334332] mmcblk0: p1 p2 p3 [ 4.495608] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.863405] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 6.827393] Adding 4085756k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:4085756k SSFS with inserted SD card dmesg | grep mmc [ 2.994522] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA [ 3.013437] mmc1: SDHCI controller on ACPI [80860F14:03] using ADMA [ 3.323762] mmc0: new HS200 MMC card at address 0001 [ 3.330155] mmcblk0: mmc0:0001 BJNB4R 29.1 GiB [ 3.330320] mmcblk0boot0: mmc0:0001 BJNB4R partition 1 4.00 MiB [ 3.330482] mmcblk0boot1: mmc0:0001 BJNB4R partition 2 4.00 MiB [ 3.330641] mmcblk0rpmb: mmc0:0001 BJNB4R partition 3 4.00 MiB [ 3.334332] mmcblk0: p1 p2 p3 [ 4.495608] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.863405] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 6.827393] Adding 4085756k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:4085756k SSFS [ 216.577900] mmc1: new ultra high speed SDR104 SDXC card at address 59b4 [ 216.578575] mmcblk1: mmc1:59b4 0 59.7 GiB [ 216.580031] mmcblk1: p1 [ 216.857616] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. === inxi -Fxz System: Host: ASUS Kernel: 4.15.0-42-generic x86_64 (64 bit gcc: 5.4.0) Desktop: KDE Plasma 5.8.9 (Qt 5.6.1) Distro: Linux Mint 18.3 Sylvia Machine: Mobo: ASUSTeK model: E200HA v: 1.0 Bios: American Megatrends v: E200HA.303 date: 12/21/2016 CPU: Quad core Intel Atom x5-Z8350 (-MCP-) cache: 1024 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 11520 clock speeds: max: 1920 MHz 1: 839 MHz 2: 816 MHz 3: 480 MHz 4: 480 MHz Graphics: Card: Intel Device 22b0 bus-ID: 00:02.0 Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.06hz GLX
[Kernel-packages] [Bug 1826650] Re: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned
*** This bug is a duplicate of bug 1826626 *** https://bugs.launchpad.net/bugs/1826626 ** This bug has been marked a duplicate of bug 1826626 package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1826650 Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned Status in linux package in Ubuntu: Confirmed Bug description: Ubuntu 5.0.0-13.14-generic 5.0.6 pcilib: sysfs_read_vpd: read failed: Input/output error ProblemType: Package DistroRelease: Ubuntu 19.04 Package: linux-image-5.0.0-13-generic 5.0.0-13.14 ProcVersionSignature: Ubuntu 5.0.0-13.14-generic 5.0.6 Uname: Linux 5.0.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ramaseshan 2764 F pulseaudio /dev/snd/controlC1: ramaseshan 2764 F pulseaudio Date: Wed Apr 24 16:44:19 2019 ErrorMessage: triggers looping, abandoned HibernationDevice: RESUME=UUID=ea45a19e-9e0e-4b6e-b20d-1fd67245ece0 InstallationDate: Installed on 2016-08-15 (985 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: LENOVO 80JV ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-13-generic root=UUID=2e79c64e-db50-45ae-a797-bc24146c8706 ro quiet splash vt.handoff=1 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Python3Details: /usr/bin/python3.7, Python 3.7.3, python3-minimal, 3.7.3-1 PythonDetails: /usr/bin/python3.7, Python 3.7.3, python-minimal, 2.7.16-1 RelatedPackageVersions: grub-pc N/A SourcePackage: linux Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned UpgradeStatus: Upgraded to disco on 2019-04-24 (3 days ago) dmi.bios.date: 03/10/2015 dmi.bios.vendor: Lenovo dmi.bios.version: BDCN28WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Lenovo U41-70 dmi.board.vendor: LENOVO dmi.board.version: 31900059 WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo U41-70 dmi.modalias: dmi:bvnLenovo:bvrBDCN28WW:bd03/10/2015:svnLENOVO:pn80JV:pvrLenovoU41-70:rvnLENOVO:rnLenovoU41-70:rvr31900059WIN:cvnLENOVO:ct10:cvrLenovoU41-70: dmi.product.family: IDEAPAD dmi.product.name: 80JV dmi.product.sku: LENOVO_MT_80JV_BU_idea_FM_Lenovo U41-70 dmi.product.version: Lenovo U41-70 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1826650/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1810183] Re: numpad on touchpad doesn't work in ASUS Zenbook 14
dmesg reports nothing when pushing the button to activate the button. checking the evtest output for the touchpad I cant see anything interesting $ sudo evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: Lid Switch /dev/input/event1: Sleep Button /dev/input/event2: Power Button /dev/input/event3: Power Button /dev/input/event4: AT Translated Set 2 keyboard /dev/input/event5: PC Speaker /dev/input/event6: Asus WMI hotkeys /dev/input/event7: ELAN1402:00 04F3:30BF Touchpad /dev/input/event8: ELAN1402:00 04F3:30BF Keyboard /dev/input/event9: Video Bus /dev/input/event10: Video Bus /dev/input/event11: Logitech USB Receiver /dev/input/event12: Logitech USB Receiver Mouse /dev/input/event13: Logitech USB Receiver Consumer Control /dev/input/event14: USB2.0 HD IR UVC WebCam: USB2.0 /dev/input/event15: Logitech USB Receiver System Control /dev/input/event16: USB2.0 HD IR UVC WebCam: USB2.0 /dev/input/event17: HDA Intel PCH Headset Mic /dev/input/event18: HDA Intel PCH Headphone /dev/input/event19: HDA Intel PCH HDMI/DP,pcm=3 /dev/input/event20: HDA Intel PCH HDMI/DP,pcm=7 /dev/input/event21: HDA Intel PCH HDMI/DP,pcm=8 /dev/input/event22: HDA Intel PCH HDMI/DP,pcm=9 /dev/input/event23: HDA Intel PCH HDMI/DP,pcm=10 /dev/input/event24: 00:16:94:31:EF:23 Select the device event number [0-24]: 7 Input driver version is 1.0.1 Input device ID: bus 0x18 vendor 0x4f3 product 0x30bf version 0x100 Input device name: "ELAN1402:00 04F3:30BF Touchpad" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 272 (BTN_LEFT) Event code 325 (BTN_TOOL_FINGER) Event code 328 (BTN_TOOL_QUINTTAP) Event code 330 (BTN_TOUCH) Event code 333 (BTN_TOOL_DOUBLETAP) Event code 334 (BTN_TOOL_TRIPLETAP) Event code 335 (BTN_TOOL_QUADTAP) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 1307 Min0 Max 2992 Resolution 31 Event code 1 (ABS_Y) Value808 Min0 Max 1496 Resolution 31 Event code 47 (ABS_MT_SLOT) Value 0 Min0 Max4 Event code 53 (ABS_MT_POSITION_X) Value 0 Min0 Max 2992 Resolution 31 Event code 54 (ABS_MT_POSITION_Y) Value 0 Min0 Max 1496 Resolution 31 Event code 55 (ABS_MT_TOOL_TYPE) Value 0 Min0 Max2 Event code 57 (ABS_MT_TRACKING_ID) Value 0 Min0 Max65535 Event type 4 (EV_MSC) Event code 5 (MSC_TIMESTAMP) Properties: Property type 0 (INPUT_PROP_POINTER) Property type 2 (INPUT_PROP_BUTTONPAD) Testing ... (interrupt to exit) Event: time 1556406853.164537, type 3 (EV_ABS), code 57 (ABS_MT_TRACKING_ID), value 1779 Event: time 1556406853.164537, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 2941 Event: time 1556406853.164537, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 0 Event: time 1556406853.164537, type 1 (EV_KEY), code 330 (BTN_TOUCH), value 1 Event: time 1556406853.164537, type 1 (EV_KEY), code 325 (BTN_TOOL_FINGER), value 1 Event: time 1556406853.164537, type 3 (EV_ABS), code 0 (ABS_X), value 2941 Event: time 1556406853.164537, type 3 (EV_ABS), code 1 (ABS_Y), value 0 Event: time 1556406853.164537, type 4 (EV_MSC), code 5 (MSC_TIMESTAMP), value 0 Event: time 1556406853.164537, -- SYN_REPORT Event: time 1556406853.171046, type 4 (EV_MSC), code 5 (MSC_TIMESTAMP), value 2000 Event: time 1556406853.171046, -- SYN_REPORT Event: time 1556406853.177882, type 4 (EV_MSC), code 5 (MSC_TIMESTAMP), value 9000 Event: time 1556406853.177882, -- SYN_REPORT Event: time 1556406853.185222, type 4 (EV_MSC), code 5 (MSC_TIMESTAMP), value 16000 Event: time 1556406853.185222, -- SYN_REPORT Event: time 1556406853.192114, type 4 (EV_MSC), code 5 (MSC_TIMESTAMP), value 23000 Event: time 1556406853.192114, -- SYN_REPORT Event: time 1556406853.198822, type 4 (EV_MSC), code 5 (MSC_TIMESTAMP), value 3 Event: time 1556406853.198822, -- SYN_REPORT Event: time 1556406853.205969, type 4 (EV_MSC), code 5 (MSC_TIMESTAMP), value 36000 Event: time 1556406853.205969, -- SYN_REPORT Event: time 1556406853.213311, type 4 (EV_MSC), code 5 (MSC_TIMESTAMP), value 44000 Event: time 1556406853.213311, -- SYN_REPORT Event: time 1556406853.220230, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 2940 Event: time 1556406853.220230, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 4 Event: time 1556406853.220230, type 3 (EV_ABS), code 0 (ABS_X), value 2940 Event: time 1556406853.220230, type 3 (EV_ABS), code 1
[Kernel-packages] [Bug 1819242] Re: The touchpad doesn't work unless I move the mouse slowly.. Also I am unable to click and drag.
I am supposed to edit file "/sys/class/dmi/id/modalias" and then play with the configurations to adjust my touchpad. However. I am unable to edit the file modalias. I even used administrator rights on Nautilus to adjust it, however it still didn't let me edit the file. Any ideas? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1819242 Title: The touchpad doesn't work unless I move the mouse slowly.. Also I am unable to click and drag. Status in linux package in Ubuntu: Incomplete Bug description: I am unable to use the touchpad properly. I am also unable to click and drag. This worked alright on previous versions of ubuntu.. (16.04) I am using ubuntu 18.04.2 LTS ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-image-4.18.0-16-generic 4.18.0-16.17~18.04.1 ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 Uname: Linux 4.18.0-16-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Mar 8 20:44:08 2019 InstallationDate: Installed on 2019-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: linux-signed-hwe UpgradeStatus: No upgrade log present (probably fresh install) --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: alfredo1359 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: Dell Inc. Dell System XPS L321X Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=55101717-1323-4f12-8339-2784d2f33f81 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/22/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A08 dmi.board.name: 0Y4RM9 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA08:bd01/22/2013:svnDellInc.:pnDellSystemXPSL321X:pvr:rvnDellInc.:rn0Y4RM9:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.family: HuronRiver System dmi.product.name: Dell System XPS L321X dmi.product.sku: System SKUNumber dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1819242/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1819242] Re: The touchpad doesn't work unless I move the mouse slowly.. Also I am unable to click and drag.
fredo@fredo-Dell-System-XPS-L321X:~$ dmesg|grep -i "ps/2" [1.006927] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [1.010735] mousedev: PS/2 mouse device common for all mice [2.667559] input: CyPS/2 Cypress Trackpad as /devices/platform/i8042/serio1/input/input6 fredo@fredo-Dell-System-XPS-L321X:~$ for some reason it detects my finger as a palm?? >.https://bugs.launchpad.net/bugs/1819242 Title: The touchpad doesn't work unless I move the mouse slowly.. Also I am unable to click and drag. Status in linux package in Ubuntu: Incomplete Bug description: I am unable to use the touchpad properly. I am also unable to click and drag. This worked alright on previous versions of ubuntu.. (16.04) I am using ubuntu 18.04.2 LTS ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-image-4.18.0-16-generic 4.18.0-16.17~18.04.1 ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 Uname: Linux 4.18.0-16-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Mar 8 20:44:08 2019 InstallationDate: Installed on 2019-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: linux-signed-hwe UpgradeStatus: No upgrade log present (probably fresh install) --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: alfredo1359 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2019-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: Dell Inc. Dell System XPS L321X Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=55101717-1323-4f12-8339-2784d2f33f81 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: bionic Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/22/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A08 dmi.board.name: 0Y4RM9 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA08:bd01/22/2013:svnDellInc.:pnDellSystemXPSL321X:pvr:rvnDellInc.:rn0Y4RM9:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.family: HuronRiver System dmi.product.name: Dell System XPS L321X dmi.product.sku: System SKUNumber dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1819242/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1816947] Re: [Dell XPS L321X] Touchpad not working after last apt-get upgrade
fredo@fredo-Dell-System-XPS-L321X:~$ dmesg|grep -i "ps/2" [1.006927] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [1.010735] mousedev: PS/2 mouse device common for all mice [2.667559] input: CyPS/2 Cypress Trackpad as /devices/platform/i8042/serio1/input/input6 fredo@fredo-Dell-System-XPS-L321X:~$ I believe the problem is in libinput.. for some reason it detects my finger as a palm.. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1816947 Title: [Dell XPS L321X] Touchpad not working after last apt-get upgrade Status in libinput package in Ubuntu: Invalid Status in linux package in Ubuntu: Incomplete Bug description: The touchpad doesn't work unless the cursor is moved slowly. WORKAROUND: Execute at a terminal: sudo modprobe -r psmouse sudo modprobe psmouse proto=imps ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: xorg 1:7.7+19ubuntu8 ProcVersionSignature: Ubuntu 4.18.0-11.12-generic 4.18.12 Uname: Linux 4.18.0-11-generic x86_64 ApportVersion: 2.20.10-0ubuntu19 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperVersion: 1.402 CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Thu Feb 21 02:56:45 2019 DistUpgraded: Fresh install DistroCodename: disco DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell 2nd Generation Core Processor Family Integrated Graphics Controller [1028:052e] LiveMediaBuild: Ubuntu 19.04 "Disco Dingo" - Alpha amd64 (20190203) MachineType: Dell Inc. Dell System XPS L321X ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=C.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd quiet splash --- maybe-ubiquity SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/27/2011 dmi.bios.vendor: Dell Inc. dmi.bios.version: A01 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA01:bd12/27/2011:svnDellInc.:pnDellSystemXPSL321X:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct8:cvr0.1: dmi.product.family: HuronRiver System dmi.product.name: Dell System XPS L321X dmi.product.sku: System SKUNumber dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.97-1 version.libgl1-mesa-dri: libgl1-mesa-dri 18.3.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.3-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20180925-2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperVersion: 1.394 CompositorRunning: None CurrentDesktop: ubuntu:GNOME DistUpgraded: Fresh install DistroCodename: bionic DistroRelease: Ubuntu 18.04 DistroVariant: ubuntu GraphicsCard: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell 2nd Generation Core Processor Family Integrated Graphics Controller [1028:052e] LiveMediaBuild: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: Dell Inc. Dell System XPS L321X Package: libinput (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd quiet splash --- maybe-ubiquity ProcVersionSignature: Ubuntu 4.18.0-15.16~18.04.1-generic 4.18.20 Tags: bionic ubuntu Uname: Linux 4.18.0-15-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/27/2011 dmi.bios.vendor: Dell Inc. dmi.bios.version: A01 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA01:bd12/27/2011:svnDellInc.:pnDellSystemXPSL321X:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct8:cvr0.1: dmi.product.family: HuronRiver System dmi.product.name: Dell System XPS L321X dmi.product.sku: System SKUNumber dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.libdrm2:
[Kernel-packages] [Bug 1816947] Re: [Dell XPS L321X] Touchpad not working after last apt-get upgrade
fredo@fredo-Dell-System-XPS-L321X:~$ sudo libinput measure touchpad-pressure Using CyPS/2 Cypress Trackpad: /dev/input/event5 Ready for recording data. Pressure range used: 30:25 Palm pressure range used: 130 Place a single finger on the touchpad to measure pressure values. Ctrl+C to exit Sequence 1115 pressure: min: 61 max: 129 avg: 103 median: 108 tags: down Sequence 1116 pressure: min: 36 max: 189 avg: 127 median: 130 tags: down palm Sequence 1117 pressure: min: 60 max: 139 avg: 118 median: 116 tags: down palm Sequence 1118 pressure: min: 8 max: 119 avg: 92 median: 96 tags: down Sequence 1119 pressure: min: 12 max: 131 avg: 103 median: 109 tags: down palm Sequence 1120 pressure: min: 12 max: 126 avg: 69 median: 63 tags: down Sequence 1121 pressure: min: 9 max: 11 avg: 10 median: 10 tags: Sequence 1122 pressure: min: 8 max: 15 avg: 12 median: 13 tags: Sequence 1123 pressure: min: 9 max: 43 avg: 25 median: 22 tags: down Sequence 1124 pressure: min: 19 max: 217 avg: 132 median: 141 tags: down palm Sequence 1125 pressure: min: 18 max: 213 avg: 113 median: 115 tags: down palm Sequence 1126 pressure: min: 239 max: 239 avg: 239 median: 239 tags: down palm Sequence 1127 pressure: min: 34 max: 227 avg: 129 median: 125 tags: down palm Sequence 1128 pressure: min: 13 max: 133 avg: 102 median: 102 tags: down palm Sequence 1129 pressure: min: 10 max: 82 avg: 57 median: 59 tags: down Sequence 1130 pressure: min: 21 max: 95 avg: 64 median: 65 tags: down Sequence 1131 pressure: min: 56 max: 207 avg: 146 median: 150 tags: down palm Sequence 1132 pressure: min: 54 max: 103 avg: 79 median: 75 tags: down Sequence 1133 pressure: min: 57 max: 157 avg: 118 median: 120 tags: down palm Sequence 1134 pressure: min: 38 max: 138 avg: 94 median: 93 tags: down palm Sequence 1135 pressure: min: 57 max: 155 avg: 110 median: 104 tags: down palm Sequence 1136 pressure: min: 52 max: 152 avg: 96 median: 93 tags: down palm Sequence 1137 pressure: min: 17 max: 227 avg: 122 median: 123 tags: down palm Sequence 1138 pressure: min: 65 max: 178 avg: 110 median: 105 tags: down palm Sequence 1139 pressure: min: 58 max: 111 avg: 100 median: 105 tags: down Sequence 1140 pressure: min: 61 max: 172 avg: 115 median: 114 tags: down palm Sequence 1141 pressure: min: 31 max: 131 avg: 91 median: 99 tags: down palm Sequence 1142 pressure: min: 54 max: 168 avg: 132 median: 141 tags: down palm Sequence 1143 pressure: min: 18 max: 222 avg: 125 median: 131 tags: down palm Sequence 1144 pressure: min: 67 max: 255 avg: 169 median: 169 tags: down palm Sequence 1145 pressure: min: 62 max: 135 avg: 107 median: 109 tags: down palm Sequence 1146 pressure: min: 46 max: 140 avg: 97 median: 101 tags: down palm Sequence 1147 pressure: min: 35 max: 145 avg: 114 median: 117 tags: down palm Sequence 1148 pressure: min: 40 max: 106 avg: 91 median: 93 tags: down Sequence 1149 pressure: min: 53 max: 135 avg: 112 median: 113 tags: down palm Sequence 1150 pressure: min: 51 max: 131 avg: 101 median: 103 tags: down palm Sequence 1151 pressure: min: 9 max: 217 avg: 102 median: 100 tags: down palm Sequence 1152 pressure: min: 9 max: 10 avg: 9 median: 10 tags: ^Cfredo@fredo-Dell-System-XPS-L321X:~$ dmesg|grep -i "ps/2" [1.006927] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [1.010735] mousedev: PS/2 mouse device common for all mice [2.667559] input: CyPS/2 Cypress Trackpad as /devices/platform/i8042/serio1/input/input6 fredo@fredo-Dell-System-XPS-L321X:~$ -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1816947 Title: [Dell XPS L321X] Touchpad not working after last apt-get upgrade Status in libinput package in Ubuntu: Invalid Status in linux package in Ubuntu: Incomplete Bug description: The touchpad doesn't work unless the cursor is moved slowly. WORKAROUND: Execute at a terminal: sudo modprobe -r psmouse sudo modprobe psmouse proto=imps ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: xorg 1:7.7+19ubuntu8 ProcVersionSignature: Ubuntu 4.18.0-11.12-generic 4.18.12 Uname: Linux 4.18.0-11-generic x86_64 ApportVersion: 2.20.10-0ubuntu19 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperVersion: 1.402 CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Thu Feb 21 02:56:45 2019 DistUpgraded: Fresh install DistroCodename: disco DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell 2nd Generation Core Processor Family Integrated Graphics Controller [1028:052e] LiveMediaBuild: Ubuntu 19.04 "Disco Dingo" - Alpha amd64 (20190203) MachineType: Dell Inc. Dell System XPS L321X
[Kernel-packages] [Bug 1819242] Re: The touchpad doesn't work unless I move the mouse slowly.. Also I am unable to click and drag.
fredo@fredo-Dell-System-XPS-L321X:~$ sudo libinput measure touchpad-pressure Using CyPS/2 Cypress Trackpad: /dev/input/event5 Ready for recording data. Pressure range used: 30:25 Palm pressure range used: 130 Place a single finger on the touchpad to measure pressure values. Ctrl+C to exit Sequence 1115 pressure: min: 61 max: 129 avg: 103 median: 108 tags: down Sequence 1116 pressure: min: 36 max: 189 avg: 127 median: 130 tags: down palm Sequence 1117 pressure: min: 60 max: 139 avg: 118 median: 116 tags: down palm Sequence 1118 pressure: min: 8 max: 119 avg: 92 median: 96 tags: down Sequence 1119 pressure: min: 12 max: 131 avg: 103 median: 109 tags: down palm Sequence 1120 pressure: min: 12 max: 126 avg: 69 median: 63 tags: down Sequence 1121 pressure: min: 9 max: 11 avg: 10 median: 10 tags: Sequence 1122 pressure: min: 8 max: 15 avg: 12 median: 13 tags: Sequence 1123 pressure: min: 9 max: 43 avg: 25 median: 22 tags: down Sequence 1124 pressure: min: 19 max: 217 avg: 132 median: 141 tags: down palm Sequence 1125 pressure: min: 18 max: 213 avg: 113 median: 115 tags: down palm Sequence 1126 pressure: min: 239 max: 239 avg: 239 median: 239 tags: down palm Sequence 1127 pressure: min: 34 max: 227 avg: 129 median: 125 tags: down palm Sequence 1128 pressure: min: 13 max: 133 avg: 102 median: 102 tags: down palm Sequence 1129 pressure: min: 10 max: 82 avg: 57 median: 59 tags: down Sequence 1130 pressure: min: 21 max: 95 avg: 64 median: 65 tags: down Sequence 1131 pressure: min: 56 max: 207 avg: 146 median: 150 tags: down palm Sequence 1132 pressure: min: 54 max: 103 avg: 79 median: 75 tags: down Sequence 1133 pressure: min: 57 max: 157 avg: 118 median: 120 tags: down palm Sequence 1134 pressure: min: 38 max: 138 avg: 94 median: 93 tags: down palm Sequence 1135 pressure: min: 57 max: 155 avg: 110 median: 104 tags: down palm Sequence 1136 pressure: min: 52 max: 152 avg: 96 median: 93 tags: down palm Sequence 1137 pressure: min: 17 max: 227 avg: 122 median: 123 tags: down palm Sequence 1138 pressure: min: 65 max: 178 avg: 110 median: 105 tags: down palm Sequence 1139 pressure: min: 58 max: 111 avg: 100 median: 105 tags: down Sequence 1140 pressure: min: 61 max: 172 avg: 115 median: 114 tags: down palm Sequence 1141 pressure: min: 31 max: 131 avg: 91 median: 99 tags: down palm Sequence 1142 pressure: min: 54 max: 168 avg: 132 median: 141 tags: down palm Sequence 1143 pressure: min: 18 max: 222 avg: 125 median: 131 tags: down palm Sequence 1144 pressure: min: 67 max: 255 avg: 169 median: 169 tags: down palm Sequence 1145 pressure: min: 62 max: 135 avg: 107 median: 109 tags: down palm Sequence 1146 pressure: min: 46 max: 140 avg: 97 median: 101 tags: down palm Sequence 1147 pressure: min: 35 max: 145 avg: 114 median: 117 tags: down palm Sequence 1148 pressure: min: 40 max: 106 avg: 91 median: 93 tags: down Sequence 1149 pressure: min: 53 max: 135 avg: 112 median: 113 tags: down palm Sequence 1150 pressure: min: 51 max: 131 avg: 101 median: 103 tags: down palm Sequence 1151 pressure: min: 9 max: 217 avg: 102 median: 100 tags: down palm Sequence 1152 pressure: min: 9 max: 10 avg: 9 median: 10 tags: ^Cfredo@fredo-Dell-System-XPS-L321X:~$ dmesg|grep -i "ps/2" [1.006927] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [1.010735] mousedev: PS/2 mouse device common for all mice [2.667559] input: CyPS/2 Cypress Trackpad as /devices/platform/i8042/serio1/input/input6 fredo@fredo-Dell-System-XPS-L321X:~$ -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1819242 Title: The touchpad doesn't work unless I move the mouse slowly.. Also I am unable to click and drag. Status in linux package in Ubuntu: Incomplete Bug description: I am unable to use the touchpad properly. I am also unable to click and drag. This worked alright on previous versions of ubuntu.. (16.04) I am using ubuntu 18.04.2 LTS ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-image-4.18.0-16-generic 4.18.0-16.17~18.04.1 ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 Uname: Linux 4.18.0-16-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Mar 8 20:44:08 2019 InstallationDate: Installed on 2019-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: linux-signed-hwe UpgradeStatus: No upgrade log present (probably fresh install) --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: alfredo1359 F pulseaudio CurrentDesktop:
[Kernel-packages] [Bug 1799988] Re: Missing wifi and bluetooth after sleep on XPS 9370
Yes, you're correct. Updated snippet: tee /lib/systemd/system-sleep/rfkill-bluetooth-workaround
[Kernel-packages] [Bug 1790595] Re: Line 6 POD HD500 driver fault
Sorry for late answer. Still no luck with driver even on bare metal. Warning "config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64" still present. Now this driver creates two audio interfaces. Try to play through both by pulseaudio and alsa, no system freezing like in previous times but, no sound playing through phones on hdpod, and no sound recorded on notebook. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag
[Kernel-packages] [Bug 1790595] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259536/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259534/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259533/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259538/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259537/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259532/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259535/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] PciMultimedia.txt
apport information ** Attachment added: "PciMultimedia.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259531/+files/PciMultimedia.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259539/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259522/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] Card0.Amixer.values.txt
apport information ** Attachment added: "Card0.Amixer.values.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259523/+files/Card0.Amixer.values.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259530/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] Card0.Codecs.codec.1.txt
apport information ** Attachment added: "Card0.Codecs.codec.1.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259525/+files/Card0.Codecs.codec.1.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] Card0.Codecs.codec.0.txt
apport information ** Attachment added: "Card0.Codecs.codec.0.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259524/+files/Card0.Codecs.codec.0.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259528/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259529/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] Card0.Codecs.codec.2.txt
apport information ** Attachment added: "Card0.Codecs.codec.2.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259526/+files/Card0.Codecs.codec.2.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] AplayDevices.txt
apport information ** Attachment added: "AplayDevices.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259521/+files/AplayDevices.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1790595/+attachment/5259527/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1790595 Title: Line 6 POD HD500 driver fault Status in linux package in Ubuntu: Confirmed Bug description: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1790595] Re: Line 6 POD HD500 driver fault
apport information ** Description changed: Release: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic uname: Linux GSLM 4.15.0-33-lowlatency #36-Ubuntu SMP PREEMPT Wed Aug 15 17:20:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux lspci -vnvn https://pastebin.com/7KM9bybk dmesg: usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 44.208541] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 44.208548] usb 1-5: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 44.209063] usb 1-5: New USB device found, idVendor=0e41, idProduct=414d [ 44.209068] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.209072] usb 1-5: Product: POD HD500 [ 44.209076] usb 1-5: Manufacturer: Line 6 [ 44.209992] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 found [ 44.210969] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now attached [ 44.211283] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 found [ 44.211289] usb 1-5: selecting invalid altsetting 1 [ 44.211292] snd_usb_podhd 1-5:1.1: set_interface failed [ 44.211304] snd_usb_podhd 1-5:1.1: Line 6 POD HD500 now disconnected [ 44.211317] snd_usb_podhd: probe of 1-5:1.1 failed with error -22 [ 69.605987] nvidia-modeset: Allocated GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 69.606386] nvidia-modeset: Freed GPU:0 (GPU-a23356f9-937a-4843-a3cc-da12769e0681) @ PCI::01:00.0 [ 153.206595] usb 1-5: USB disconnect, device number 6 [ 153.207101] snd_usb_podhd 1-5:1.0: Line 6 POD HD500 now disconnected [ 165.694350] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 165.842687] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 165.842693] usb 1-1: config 1 interface 1 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 165.843146] usb 1-1: New USB device found, idVendor=0e41, idProduct=414d [ 165.843147] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.843149] usb 1-1: Product: POD HD500 [ 165.843150] usb 1-1: Manufacturer: Line 6 [ 165.843800] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 found [ 165.844514] snd_usb_podhd 1-1:1.0: Line 6 POD HD500 now attached [ 165.844740] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 found [ 165.844742] usb 1-1: selecting invalid altsetting 1 [ 165.844743] snd_usb_podhd 1-1:1.1: set_interface failed [ 165.844747] snd_usb_podhd 1-1:1.1: Line 6 POD HD500 now disconnected [ 165.844752] snd_usb_podhd: probe of 1-1:1.1 failed with error -22 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (63 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: ASUSTeK COMPUTER INC. N501VW NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-lowlatency root=UUID=d7f11886-eed1-4644-ac54-ada42c063889 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-33.36-lowlatency 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-lowlatency N/A linux-backports-modules-4.15.0-33-lowlatency N/A linux-firmware1.173.1 Tags: bionic Uname: Linux 4.15.0-33-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/28/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501VW.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501VW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501VW.304:bd11/28/2016:svnASUSTeKCOMPUTERINC.:pnN501VW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501VW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.family: N dmi.product.name: N501VW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-07-03 (66 days ago)
[Kernel-packages] [Bug 1826645] Re: no sound in laptop ASUS UX362FA - sending repair
Hi, I sent mail with repair right now. It is reported to alsa-devel@alsa- project.org. Thanks for instruction. Petr -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1826645 Title: no sound in laptop ASUS UX362FA - sending repair Status in Linux: Confirmed Status in linux package in Ubuntu: New Bug description: Hi, I bought laptop ASUS UX362FA: https://www.asus.com/2-in-1-PCs/ASUS- ZenBook-Flip-13-UX362FA/ The sound didn't work. I was looking for solution and I found this article: https://forum.manjaro.org/t/alc294-analog-audio-card- detected-but-no-sound-internaly-or-headphones/54089/29 So I added this line into (https://github.com/torvalds/linux/blob/master/sound/pci/hda/patch_realtek.c): SND_PCI_QUIRK(0x1043, 0x13e1, "ASUS UX362FA", ALC294_FIXUP_ASUS_SPK), behind this line: SND_PCI_QUIRK(0x1043, 0x10a1, "ASUS UX391UA", ALC294_FIXUP_ASUS_SPK) And recompile kernel and it works. I'm sending this report for others, who have the same problem with this laptop version. Please add this repair to kernel for the others. Thank you. my hwinfo: root@zenbook:~$ hwinfo --sound 15: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.jsQALdVXpeB SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x9dc8 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x13e1 Revision: 0x30 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xb1218000-0xb121bfff (rw,non-prefetchable) Memory Range: 0xb100-0xb10f (rw,non-prefetchable) IRQ: 127 (100 events) Module Alias: "pci:v8086d9DC8sv1043sd13E1bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Driver Info #1: Driver Status: snd_soc_skl is active Driver Activation Cmd: "modprobe snd_soc_skl" Config Status: cfg=new, avail=yes, need=no, active=unknown To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1826645/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1799988] Re: Missing wifi and bluetooth after sleep on XPS 9370
Thanks for the workaround @rasch, I'll try it. One question, I don't have a "/lib/systemd/systemd-sleep/" folder. Maybe it is "/lib/systemd/system-sleep/"? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1799988 Title: Missing wifi and bluetooth after sleep on XPS 9370 Status in Dell Sputnik: New Status in linux package in Ubuntu: Confirmed Bug description: I have XPS9370 with self-installed Ubuntu 18.10 (not project sputnik) with Killer 1435 wireless module. And sometimes I find wifi and bluetooth missing after sleep. I cannot exactly define preconditions, but it seems there are following steps to reproduce the issue 1. Connect something via bluetooth (I use bluetooth headset) 2. Send laptop to sleep 3. Wake it and find wifi and bluetooth missing. I have to mention that I have also been experienced bluetooth only missing, but it somehow transformed to the issue with both wireless devices. Dmesg after waking up with the issue attached --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu13 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kao2362 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.10 InstallationDate: Installed on 2018-09-22 (33 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Alpha amd64 (20180922) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 012: ID 0489:e0a2 Foxconn / Hon Hai Bus 001 Device 002: ID 0bda:58f4 Realtek Semiconductor Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. XPS 13 9370 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-10-generic root=UUID=34230cbd-d3d2-4cb8-855a-307883bc35ea ro quiet splash mem_sleep_default=deep video=1920x1080 usbcore.dyndbg=+p vt.handoff=1 ProcVersionSignature: Ubuntu 4.18.0-10.11-generic 4.18.12 RelatedPackageVersions: linux-restricted-modules-4.18.0-10-generic N/A linux-backports-modules-4.18.0-10-generic N/A linux-firmware 1.175 Tags: cosmic Uname: Linux 4.18.0-10-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 08/09/2018 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.1 dmi.board.name: 0VM1FG dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.1:bd08/09/2018:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0VM1FG:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9370 dmi.product.sku: 07E6 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/dell-sputnik/+bug/1799988/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1826650] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1826650 Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned Status in linux package in Ubuntu: Confirmed Bug description: Ubuntu 5.0.0-13.14-generic 5.0.6 pcilib: sysfs_read_vpd: read failed: Input/output error ProblemType: Package DistroRelease: Ubuntu 19.04 Package: linux-image-5.0.0-13-generic 5.0.0-13.14 ProcVersionSignature: Ubuntu 5.0.0-13.14-generic 5.0.6 Uname: Linux 5.0.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ramaseshan 2764 F pulseaudio /dev/snd/controlC1: ramaseshan 2764 F pulseaudio Date: Wed Apr 24 16:44:19 2019 ErrorMessage: triggers looping, abandoned HibernationDevice: RESUME=UUID=ea45a19e-9e0e-4b6e-b20d-1fd67245ece0 InstallationDate: Installed on 2016-08-15 (985 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: LENOVO 80JV ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-13-generic root=UUID=2e79c64e-db50-45ae-a797-bc24146c8706 ro quiet splash vt.handoff=1 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Python3Details: /usr/bin/python3.7, Python 3.7.3, python3-minimal, 3.7.3-1 PythonDetails: /usr/bin/python3.7, Python 3.7.3, python-minimal, 2.7.16-1 RelatedPackageVersions: grub-pc N/A SourcePackage: linux Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned UpgradeStatus: Upgraded to disco on 2019-04-24 (3 days ago) dmi.bios.date: 03/10/2015 dmi.bios.vendor: Lenovo dmi.bios.version: BDCN28WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Lenovo U41-70 dmi.board.vendor: LENOVO dmi.board.version: 31900059 WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo U41-70 dmi.modalias: dmi:bvnLenovo:bvrBDCN28WW:bd03/10/2015:svnLENOVO:pn80JV:pvrLenovoU41-70:rvnLENOVO:rnLenovoU41-70:rvr31900059WIN:cvnLENOVO:ct10:cvrLenovoU41-70: dmi.product.family: IDEAPAD dmi.product.name: 80JV dmi.product.sku: LENOVO_MT_80JV_BU_idea_FM_Lenovo U41-70 dmi.product.version: Lenovo U41-70 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1826650/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1776563] Re: Acer Aspire A315 IOAPIC failure on Ubuntu 18.04, kernel hangs, can't load, kernel freeze (AMD Ryzen 5/Radeon/Raven) / AMDGPU Hybrid crash
Ulf Dellbrügge (ulf-dellbruegge), it should work. Don't use slash \, just quotation marks. Slash was needed only to be able to post the comment here because launchpad filters it. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776563 Title: Acer Aspire A315 IOAPIC failure on Ubuntu 18.04, kernel hangs, can't load, kernel freeze (AMD Ryzen 5/Radeon/Raven) / AMDGPU Hybrid crash Status in amd: Fix Released Status in Linux: Incomplete Status in linux package in Ubuntu: Triaged Bug description: CPU: Ryzen 5 2500U VGA: Radeon 535 Notebook: Acer Aspire A315 This is a brand new notebook on the market with Ryzen 5/Radeon. The default kernel of Ubuntu(18.04) hangs at loading with message: tsc: Refined TSC clocksource calibration: 1996.250 MHz clocksource: tsc: mask: 0x max_cycles: (...), max_idle_ns: (...) Soft lockup Using pci=noacpi kernel parameter kernel loads without any problem but my notebook produces more heat than on Win10. If I know right Acer notebooks need ACPI to the correct power management. The same thing happens on mainline 4.17,4.18rc1-2. BIOS upgrade to the latest version: 1.08 hasn't helped This problem has been reported upstream: https://bugzilla.kernel.org/show_bug.cgi?id=200087 The latest correctly working kernel was 4.13.* but the heat problem was present with this too. To manage notifications about this bug go to: https://bugs.launchpad.net/amd/+bug/1776563/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1826650] Re: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1826650 Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned Status in linux package in Ubuntu: New Bug description: Ubuntu 5.0.0-13.14-generic 5.0.6 pcilib: sysfs_read_vpd: read failed: Input/output error ProblemType: Package DistroRelease: Ubuntu 19.04 Package: linux-image-5.0.0-13-generic 5.0.0-13.14 ProcVersionSignature: Ubuntu 5.0.0-13.14-generic 5.0.6 Uname: Linux 5.0.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ramaseshan 2764 F pulseaudio /dev/snd/controlC1: ramaseshan 2764 F pulseaudio Date: Wed Apr 24 16:44:19 2019 ErrorMessage: triggers looping, abandoned HibernationDevice: RESUME=UUID=ea45a19e-9e0e-4b6e-b20d-1fd67245ece0 InstallationDate: Installed on 2016-08-15 (985 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: LENOVO 80JV ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-13-generic root=UUID=2e79c64e-db50-45ae-a797-bc24146c8706 ro quiet splash vt.handoff=1 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Python3Details: /usr/bin/python3.7, Python 3.7.3, python3-minimal, 3.7.3-1 PythonDetails: /usr/bin/python3.7, Python 3.7.3, python-minimal, 2.7.16-1 RelatedPackageVersions: grub-pc N/A SourcePackage: linux Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned UpgradeStatus: Upgraded to disco on 2019-04-24 (3 days ago) dmi.bios.date: 03/10/2015 dmi.bios.vendor: Lenovo dmi.bios.version: BDCN28WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Lenovo U41-70 dmi.board.vendor: LENOVO dmi.board.version: 31900059 WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo U41-70 dmi.modalias: dmi:bvnLenovo:bvrBDCN28WW:bd03/10/2015:svnLENOVO:pn80JV:pvrLenovoU41-70:rvnLENOVO:rnLenovoU41-70:rvr31900059WIN:cvnLENOVO:ct10:cvrLenovoU41-70: dmi.product.family: IDEAPAD dmi.product.name: 80JV dmi.product.sku: LENOVO_MT_80JV_BU_idea_FM_Lenovo U41-70 dmi.product.version: Lenovo U41-70 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1826650/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1826645] Re: no sound in laptop ASUS UX362FA - sending repair
@Petr, Since you already have the fix, could you send the patch to alsa-devel @alsa-project.org yourself (you could refer to https://mailman.alsa- project.org/pipermail/alsa-devel/2019-April/147121.html), after it is merged by upstream kernel, we will backport it to ubuntu kernel. If you have any problem about sending patch to upstream to review, let me know. thx. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1826645 Title: no sound in laptop ASUS UX362FA - sending repair Status in Linux: Confirmed Status in linux package in Ubuntu: New Bug description: Hi, I bought laptop ASUS UX362FA: https://www.asus.com/2-in-1-PCs/ASUS- ZenBook-Flip-13-UX362FA/ The sound didn't work. I was looking for solution and I found this article: https://forum.manjaro.org/t/alc294-analog-audio-card- detected-but-no-sound-internaly-or-headphones/54089/29 So I added this line into (https://github.com/torvalds/linux/blob/master/sound/pci/hda/patch_realtek.c): SND_PCI_QUIRK(0x1043, 0x13e1, "ASUS UX362FA", ALC294_FIXUP_ASUS_SPK), behind this line: SND_PCI_QUIRK(0x1043, 0x10a1, "ASUS UX391UA", ALC294_FIXUP_ASUS_SPK) And recompile kernel and it works. I'm sending this report for others, who have the same problem with this laptop version. Please add this repair to kernel for the others. Thank you. my hwinfo: root@zenbook:~$ hwinfo --sound 15: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.jsQALdVXpeB SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x9dc8 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x13e1 Revision: 0x30 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xb1218000-0xb121bfff (rw,non-prefetchable) Memory Range: 0xb100-0xb10f (rw,non-prefetchable) IRQ: 127 (100 events) Module Alias: "pci:v8086d9DC8sv1043sd13E1bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Driver Info #1: Driver Status: snd_soc_skl is active Driver Activation Cmd: "modprobe snd_soc_skl" Config Status: cfg=new, avail=yes, need=no, active=unknown To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1826645/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1826650] [NEW] package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned
Public bug reported: Ubuntu 5.0.0-13.14-generic 5.0.6 pcilib: sysfs_read_vpd: read failed: Input/output error ProblemType: Package DistroRelease: Ubuntu 19.04 Package: linux-image-5.0.0-13-generic 5.0.0-13.14 ProcVersionSignature: Ubuntu 5.0.0-13.14-generic 5.0.6 Uname: Linux 5.0.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ramaseshan 2764 F pulseaudio /dev/snd/controlC1: ramaseshan 2764 F pulseaudio Date: Wed Apr 24 16:44:19 2019 ErrorMessage: triggers looping, abandoned HibernationDevice: RESUME=UUID=ea45a19e-9e0e-4b6e-b20d-1fd67245ece0 InstallationDate: Installed on 2016-08-15 (985 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: LENOVO 80JV ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-13-generic root=UUID=2e79c64e-db50-45ae-a797-bc24146c8706 ro quiet splash vt.handoff=1 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Python3Details: /usr/bin/python3.7, Python 3.7.3, python3-minimal, 3.7.3-1 PythonDetails: /usr/bin/python3.7, Python 3.7.3, python-minimal, 2.7.16-1 RelatedPackageVersions: grub-pc N/A SourcePackage: linux Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned UpgradeStatus: Upgraded to disco on 2019-04-24 (3 days ago) dmi.bios.date: 03/10/2015 dmi.bios.vendor: Lenovo dmi.bios.version: BDCN28WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Lenovo U41-70 dmi.board.vendor: LENOVO dmi.board.version: 31900059 WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo U41-70 dmi.modalias: dmi:bvnLenovo:bvrBDCN28WW:bd03/10/2015:svnLENOVO:pn80JV:pvrLenovoU41-70:rvnLENOVO:rnLenovoU41-70:rvr31900059WIN:cvnLENOVO:ct10:cvrLenovoU41-70: dmi.product.family: IDEAPAD dmi.product.name: 80JV dmi.product.sku: LENOVO_MT_80JV_BU_idea_FM_Lenovo U41-70 dmi.product.version: Lenovo U41-70 dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package disco -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1826650 Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned Status in linux package in Ubuntu: New Bug description: Ubuntu 5.0.0-13.14-generic 5.0.6 pcilib: sysfs_read_vpd: read failed: Input/output error ProblemType: Package DistroRelease: Ubuntu 19.04 Package: linux-image-5.0.0-13-generic 5.0.0-13.14 ProcVersionSignature: Ubuntu 5.0.0-13.14-generic 5.0.6 Uname: Linux 5.0.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ramaseshan 2764 F pulseaudio /dev/snd/controlC1: ramaseshan 2764 F pulseaudio Date: Wed Apr 24 16:44:19 2019 ErrorMessage: triggers looping, abandoned HibernationDevice: RESUME=UUID=ea45a19e-9e0e-4b6e-b20d-1fd67245ece0 InstallationDate: Installed on 2016-08-15 (985 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: LENOVO 80JV ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-13-generic root=UUID=2e79c64e-db50-45ae-a797-bc24146c8706 ro quiet splash vt.handoff=1 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Python3Details: /usr/bin/python3.7, Python 3.7.3, python3-minimal, 3.7.3-1 PythonDetails: /usr/bin/python3.7, Python 3.7.3, python-minimal, 2.7.16-1 RelatedPackageVersions: grub-pc N/A SourcePackage: linux Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned UpgradeStatus: Upgraded to disco on 2019-04-24 (3 days ago) dmi.bios.date: 03/10/2015 dmi.bios.vendor: Lenovo dmi.bios.version: BDCN28WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Lenovo U41-70 dmi.board.vendor: LENOVO dmi.board.version: 31900059 WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo U41-70 dmi.modalias: dmi:bvnLenovo:bvrBDCN28WW:bd03/10/2015:svnLENOVO:pn80JV:pvrLenovoU41-70:rvnLENOVO:rnLenovoU41-70:rvr31900059WIN:cvnLENOVO:ct10:cvrLenovoU41-70: dmi.product.family: IDEAPAD dmi.product.name: 80JV dmi.product.sku: LENOVO_MT_80JV_BU_idea_FM_Lenovo U41-70 dmi.product.version: Lenovo U41-70 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1826650/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to :
[Kernel-packages] [Bug 1826645] Re: no sound in laptop ASUS UX362FA - sending repair
Launchpad has imported 1 comments from the remote bug at https://bugzilla.kernel.org/show_bug.cgi?id=203443. If you reply to an imported comment from within Launchpad, your comment will be sent to the remote bug automatically. Read more about Launchpad's inter-bugtracker facilities at https://help.launchpad.net/InterBugTracking. On 2019-04-27T12:26:28+00:00 petr.nosek wrote: Hi, I bought laptop ASUS UX362FA: https://www.asus.com/2-in-1-PCs/ASUS- ZenBook-Flip-13-UX362FA/ The sound didn't work. I was looking for solution and I found this article: https://forum.manjaro.org/t/alc294-analog-audio-card-detected- but-no-sound-internaly-or-headphones/54089/29 So I added this line into (https://github.com/torvalds/linux/blob/master/sound/pci/hda/patch_realtek.c): SND_PCI_QUIRK(0x1043, 0x13e1, "ASUS UX362FA", ALC294_FIXUP_ASUS_SPK), behind this line: SND_PCI_QUIRK(0x1043, 0x10a1, "ASUS UX391UA", ALC294_FIXUP_ASUS_SPK) And recompile kernel and it works. I'm sending this report for others, who have the same problem with this laptop version. Please add this repair to kernel for the others. Thank you. my hwinfo: root@zenbook:~$ hwinfo --sound 15: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.jsQALdVXpeB SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x9dc8 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x13e1 Revision: 0x30 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xb1218000-0xb121bfff (rw,non-prefetchable) Memory Range: 0xb100-0xb10f (rw,non-prefetchable) IRQ: 127 (100 events) Module Alias: "pci:v8086d9DC8sv1043sd13E1bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Driver Info #1: Driver Status: snd_soc_skl is active Driver Activation Cmd: "modprobe snd_soc_skl" Config Status: cfg=new, avail=yes, need=no, active=unknown Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1826645/comments/0 ** Changed in: linux Status: Unknown => Confirmed ** Changed in: linux Importance: Unknown => Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1826645 Title: no sound in laptop ASUS UX362FA - sending repair Status in Linux: Confirmed Status in linux package in Ubuntu: New Bug description: Hi, I bought laptop ASUS UX362FA: https://www.asus.com/2-in-1-PCs/ASUS- ZenBook-Flip-13-UX362FA/ The sound didn't work. I was looking for solution and I found this article: https://forum.manjaro.org/t/alc294-analog-audio-card- detected-but-no-sound-internaly-or-headphones/54089/29 So I added this line into (https://github.com/torvalds/linux/blob/master/sound/pci/hda/patch_realtek.c): SND_PCI_QUIRK(0x1043, 0x13e1, "ASUS UX362FA", ALC294_FIXUP_ASUS_SPK), behind this line: SND_PCI_QUIRK(0x1043, 0x10a1, "ASUS UX391UA", ALC294_FIXUP_ASUS_SPK) And recompile kernel and it works. I'm sending this report for others, who have the same problem with this laptop version. Please add this repair to kernel for the others. Thank you. my hwinfo: root@zenbook:~$ hwinfo --sound 15: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.jsQALdVXpeB SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x9dc8 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x13e1 Revision: 0x30 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xb1218000-0xb121bfff (rw,non-prefetchable) Memory Range: 0xb100-0xb10f (rw,non-prefetchable) IRQ: 127 (100 events) Module Alias: "pci:v8086d9DC8sv1043sd13E1bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Driver Info #1: Driver Status: snd_soc_skl is active Driver Activation Cmd: "modprobe snd_soc_skl" Config Status: cfg=new, avail=yes, need=no, active=unknown To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1826645/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1818974] Re: Ubuntu 18.04 Kernel 4.18 - Standby wakeup user session crash
I'll switch now form permanently nvidia gtx 940mx to permanently i7-6700hq iGPU. May take a bit until I can see if the bug happens or not, because it doesn't happen every time. Luckily or badly it happens not often. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1818974 Title: Ubuntu 18.04 Kernel 4.18 - Standby wakeup user session crash Status in linux package in Ubuntu: Confirmed Bug description: I'm using Ubuntu 18.04 (Linux Mint 19.1 Tessa) with HWE. Since kernel 4.18 sometimes while waking up from standby my user session crash. I assume that my attached external USB to SATA HDD could be cause this kernel bug. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: martin27966 F pulseaudio CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 19.1 HibernationDevice: RESUME=UUID=4a747812-cab0-438b-ace1-a46b73f00d4a InstallationDate: Installed on 2018-07-21 (228 days ago) InstallationMedia: Linux Mint 19 "Tara" - Release amd64 20180626 MachineType: LENOVO 20FXS05500 NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=8ffc268d-6911-42c4-9bc3-a290376cb41b ro quiet splash nvidia-drm.modeset=1 nopti spectre_v2=off spectre_v2_user=off nospec noibrs noibpb l1tf=off vt.handoff=1 ProcVersionSignature: Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20 RelatedPackageVersions: linux-restricted-modules-4.18.0-16-generic N/A linux-backports-modules-4.18.0-16-generic N/A linux-firmware 1.173.3 Tags: tessa Uname: Linux 4.18.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom davfs2 dip lpadmin plugdev sambashare scanner sudo _MarkForUpload: True dmi.bios.date: 09/27/2018 dmi.bios.vendor: LENOVO dmi.bios.version: R07ET87W (2.27 ) dmi.board.asset.tag: Not Available dmi.board.name: 20FXS05500 dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrR07ET87W(2.27):bd09/27/2018:svnLENOVO:pn20FXS05500:pvrThinkPadT460p:rvnLENOVO:rn20FXS05500:rvrNotDefined:cvnLENOVO:ct10:cvrNone: dmi.product.family: ThinkPad T460p dmi.product.name: 20FXS05500 dmi.product.sku: LENOVO_MT_20FX_BU_Think_FM_ThinkPad T460p dmi.product.version: ThinkPad T460p dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1818974/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1825554] Re: Ryzen5 2500U Vega 8 raven ridge flickering screen
Hey, it's present in newest upstream kernel aswell. Attached is a dmesg output running the system on your testkernel for disco on cosmic for the touchpad. ** Attachment added: "dmesg.txt" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1825554/+attachment/5259475/+files/dmesg.txt ** Tags added: kernel-bug-exists-upstream -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1825554 Title: Ryzen5 2500U Vega 8 raven ridge flickering screen Status in linux package in Ubuntu: Confirmed Bug description: Hey, I'm running Ubuntu 18.10 on a Lenovo Yoga 530 14-AHR. My display is flickering, depending on the displayed content in different frequency. Video of the symptom: https://www.dropbox.com/s/ulbqo7taspx60vv/VID_20190123_151449.mp4?dl=0 --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu13.2 Architecture: amd64 CurrentDesktop: X-Cinnamon DistroRelease: Ubuntu 18.10 InstallationDate: Installed on 2018-11-09 (160 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) Package: linux (not installed) Tags: cosmic Uname: Linux 5.0.0-05-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo users vboxusers wireshark _MarkForUpload: True --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu13.2 Architecture: amd64 CurrentDesktop: X-Cinnamon DistroRelease: Ubuntu 18.10 InstallationDate: Installed on 2018-11-09 (161 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) Package: linux (not installed) Tags: cosmic Uname: Linux 5.0.8-050008-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo users vboxusers wireshark _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1825554/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1826645] Re: no sound in laptop ASUS UX362FA - sending repair
** Package changed: ubuntu => linux (Ubuntu) ** Also affects: linux via https://bugzilla.kernel.org/show_bug.cgi?id=203443 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1826645 Title: no sound in laptop ASUS UX362FA - sending repair Status in Linux: Unknown Status in linux package in Ubuntu: New Bug description: Hi, I bought laptop ASUS UX362FA: https://www.asus.com/2-in-1-PCs/ASUS- ZenBook-Flip-13-UX362FA/ The sound didn't work. I was looking for solution and I found this article: https://forum.manjaro.org/t/alc294-analog-audio-card- detected-but-no-sound-internaly-or-headphones/54089/29 So I added this line into (https://github.com/torvalds/linux/blob/master/sound/pci/hda/patch_realtek.c): SND_PCI_QUIRK(0x1043, 0x13e1, "ASUS UX362FA", ALC294_FIXUP_ASUS_SPK), behind this line: SND_PCI_QUIRK(0x1043, 0x10a1, "ASUS UX391UA", ALC294_FIXUP_ASUS_SPK) And recompile kernel and it works. I'm sending this report for others, who have the same problem with this laptop version. Please add this repair to kernel for the others. Thank you. my hwinfo: root@zenbook:~$ hwinfo --sound 15: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.jsQALdVXpeB SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x9dc8 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x13e1 Revision: 0x30 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xb1218000-0xb121bfff (rw,non-prefetchable) Memory Range: 0xb100-0xb10f (rw,non-prefetchable) IRQ: 127 (100 events) Module Alias: "pci:v8086d9DC8sv1043sd13E1bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Driver Info #1: Driver Status: snd_soc_skl is active Driver Activation Cmd: "modprobe snd_soc_skl" Config Status: cfg=new, avail=yes, need=no, active=unknown To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1826645/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1826645] [NEW] no sound in laptop ASUS UX362FA - sending repair
You have been subscribed to a public bug: Hi, I bought laptop ASUS UX362FA: https://www.asus.com/2-in-1-PCs/ASUS- ZenBook-Flip-13-UX362FA/ The sound didn't work. I was looking for solution and I found this article: https://forum.manjaro.org/t/alc294-analog-audio-card-detected- but-no-sound-internaly-or-headphones/54089/29 So I added this line into (https://github.com/torvalds/linux/blob/master/sound/pci/hda/patch_realtek.c): SND_PCI_QUIRK(0x1043, 0x13e1, "ASUS UX362FA", ALC294_FIXUP_ASUS_SPK), behind this line: SND_PCI_QUIRK(0x1043, 0x10a1, "ASUS UX391UA", ALC294_FIXUP_ASUS_SPK) And recompile kernel and it works. I'm sending this report for others, who have the same problem with this laptop version. Please add this repair to kernel for the others. Thank you. my hwinfo: root@zenbook:~$ hwinfo --sound 15: PCI 1f.3: 0403 Audio device [Created at pci.378] Unique ID: nS1_.jsQALdVXpeB SysFS ID: /devices/pci:00/:00:1f.3 SysFS BusID: :00:1f.3 Hardware Class: sound Model: "Intel Audio device" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x9dc8 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x13e1 Revision: 0x30 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xb1218000-0xb121bfff (rw,non-prefetchable) Memory Range: 0xb100-0xb10f (rw,non-prefetchable) IRQ: 127 (100 events) Module Alias: "pci:v8086d9DC8sv1043sd13E1bc04sc03i80" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Driver Info #1: Driver Status: snd_soc_skl is active Driver Activation Cmd: "modprobe snd_soc_skl" Config Status: cfg=new, avail=yes, need=no, active=unknown ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- no sound in laptop ASUS UX362FA - sending repair https://bugs.launchpad.net/bugs/1826645 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1826028] Re: linux-kvm: 4.4.0-1045.51 -proposed tracker
** Changed in: kernel-sru-workflow/automated-testing Status: In Progress => Fix Released ** Description changed: This bug will contain status and test results related to a kernel source (or snap) as stated in the title. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- boot-testing-requested: true kernel-stable-master-bug: 1826036 - phase: Testing - phase-changed: Friday, 26. April 2019 15:42 UTC + phase: Signoff + phase-changed: Saturday, 27. April 2019 12:35 UTC proposed-announcement-sent: true proposed-testing-requested: true reason: - automated-testing: Ongoing -- testing in progress regression-testing: Ongoing -- testing in progress security-signoff: Pending -- waiting for signoff verification-testing: Ongoing -- testing in progress -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-kvm in Ubuntu. https://bugs.launchpad.net/bugs/1826028 Title: linux-kvm: 4.4.0-1045.51 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: Fix Released Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Confirmed Status in Kernel SRU Workflow security-signoff series: In Progress Status in Kernel SRU Workflow verification-testing series: Confirmed Status in linux-kvm package in Ubuntu: Invalid Status in linux-kvm source package in Xenial: New Bug description: This bug will contain status and test results related to a kernel source (or snap) as stated in the title. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- boot-testing-requested: true kernel-stable-master-bug: 1826036 phase: Signoff phase-changed: Saturday, 27. April 2019 12:35 UTC proposed-announcement-sent: true proposed-testing-requested: true reason: regression-testing: Ongoing -- testing in progress security-signoff: Pending -- waiting for signoff verification-testing: Ongoing -- testing in progress To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1826028/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1825210] Re: [SRU] Please sync vbox modules from virtualbox 6.0.6 on next kernel update
yes, the kernel contains the new kernel modules for vbox, thanks! ** Tags removed: verification-needed-disco ** Tags added: verification-done-disco -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1825210 Title: [SRU] Please sync vbox modules from virtualbox 6.0.6 on next kernel update Status in linux package in Ubuntu: In Progress Status in linux source package in Disco: Fix Committed Bug description: [SRU Justification] Impact: The virtualbox package was updated in disco just prior to release, with numerous bug fixes. It is standard practice during development to sync our in-kernel source with the latest version of the virtualbox-guest-dkms package, however this upload was done so late in the release that there was not time to update the source in our kernel tree. Fix: Re-sync the vbox guest dkms drivers from virtualbox 6.0.6-dfsg-1. Regression Potential: This is a sync from the dkms package in the disco-release pocket, thus the code has presumably been tested against the Ubuntu Disco kernel. However, this is a very large pile of changes, and contains more than just bug fixes, so regressions are possible. Test Case: Boot a kernel with the updated driver in virtualbox and confirm that the guest drier functionality works as expected. --- * the changes are already in disco (vbox-guest-dkms), and they are fixes for the kernel 5.0. They might seem a lot of changes, but they are needed, and probably some of them are even CVE fixes... As said, vbox 6.0.6 includes lots of fixes for host/guest kernel modules, and they should be syncd when possible. thanks To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1825210/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1775717] Re: CPU/GPU Fans suddenly go 100% RPM on Asus ROG G752VT
> I think you already have tried to take the fans by fancontrol. The problem is - after the fans go 100%, they aren't controllable any more. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to thermald in Ubuntu. https://bugs.launchpad.net/bugs/1775717 Title: CPU/GPU Fans suddenly go 100% RPM on Asus ROG G752VT Status in linux package in Ubuntu: Incomplete Status in thermald package in Ubuntu: New Bug description: After upgrading from Ubuntu 16.04 to 18.04, I've noticed that CPU and GPU fans suddenly go full throttle. It doesn't seem to depend on temperature, could happen when 32 °C reported, sometimes the laptop can work for day or two without this issue, but eventually it happens. The only way to stop fans is to power off the laptop, power on (fans go 100% at this point again), power off during BIOS splash screen and power on again. Seems to happen more often after waking up from a sleep. Things tried: Upgrading BIOS to latest available on ASUS site to the date of writing. No change. asus-fan kernel module (https://github.com/daringer/asus-fan). Detects both fans and shows correct speed in /sys/class/hwmon/*/fan{1,2}*, but does not seem to control it and does not prevent going full throttle. 4.17.0 kernel from Ubuntu mainline builds. Doesn't seem to affect the issue. Userspace fan control software (https://github.com/hirschmann/nbfc). Can control speed of both fans to the point where they go full throttle, after that has no effect on them. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: whale 3068 F pulseaudio /dev/snd/controlC0: whale 3068 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 HibernationDevice: RESUME=UUID=ada9b595-bbf2-40a3-8575-5908492bb969 InstallationDate: Installed on 2014-10-20 (1333 days ago) InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64+mac (20140722.2) MachineType: ASUSTeK COMPUTER INC. G752VT NonfreeKernelModules: nvidia_modeset nvidia wl Package: linux (not installed) ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=f6509d56-6183-464c-90bb-9c3be2c8abdf ro quiet splash acpi_backlight=vendor vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-23-generic N/A linux-backports-modules-4.15.0-23-generic N/A linux-firmware 1.173.1 Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip docker lpadmin plugdev sambashare sudo tty video _MarkForUpload: True dmi.bios.date: 06/29/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: G752VT.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: G752VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrG752VT.304:bd06/29/2017:svnASUSTeKCOMPUTERINC.:pnG752VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnG752VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.family: G dmi.product.name: G752VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1775717/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1775717] Re: CPU/GPU Fans suddenly go 100% RPM on Asus ROG G752VT
> Does anyone know is it reproducible with ubuntu 19.04? It is -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to thermald in Ubuntu. https://bugs.launchpad.net/bugs/1775717 Title: CPU/GPU Fans suddenly go 100% RPM on Asus ROG G752VT Status in linux package in Ubuntu: Incomplete Status in thermald package in Ubuntu: New Bug description: After upgrading from Ubuntu 16.04 to 18.04, I've noticed that CPU and GPU fans suddenly go full throttle. It doesn't seem to depend on temperature, could happen when 32 °C reported, sometimes the laptop can work for day or two without this issue, but eventually it happens. The only way to stop fans is to power off the laptop, power on (fans go 100% at this point again), power off during BIOS splash screen and power on again. Seems to happen more often after waking up from a sleep. Things tried: Upgrading BIOS to latest available on ASUS site to the date of writing. No change. asus-fan kernel module (https://github.com/daringer/asus-fan). Detects both fans and shows correct speed in /sys/class/hwmon/*/fan{1,2}*, but does not seem to control it and does not prevent going full throttle. 4.17.0 kernel from Ubuntu mainline builds. Doesn't seem to affect the issue. Userspace fan control software (https://github.com/hirschmann/nbfc). Can control speed of both fans to the point where they go full throttle, after that has no effect on them. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: whale 3068 F pulseaudio /dev/snd/controlC0: whale 3068 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.04 HibernationDevice: RESUME=UUID=ada9b595-bbf2-40a3-8575-5908492bb969 InstallationDate: Installed on 2014-10-20 (1333 days ago) InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64+mac (20140722.2) MachineType: ASUSTeK COMPUTER INC. G752VT NonfreeKernelModules: nvidia_modeset nvidia wl Package: linux (not installed) ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=f6509d56-6183-464c-90bb-9c3be2c8abdf ro quiet splash acpi_backlight=vendor vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-23-generic N/A linux-backports-modules-4.15.0-23-generic N/A linux-firmware 1.173.1 Tags: bionic Uname: Linux 4.15.0-23-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip docker lpadmin plugdev sambashare sudo tty video _MarkForUpload: True dmi.bios.date: 06/29/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: G752VT.304 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: G752VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrG752VT.304:bd06/29/2017:svnASUSTeKCOMPUTERINC.:pnG752VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnG752VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.family: G dmi.product.name: G752VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1775717/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1826024] Re: linux-aws: 4.4.0-1082.92 -proposed tracker
** Changed in: kernel-sru-workflow/automated-testing Status: In Progress => Incomplete ** Description changed: This bug will contain status and test results related to a kernel source (or snap) as stated in the title. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- boot-testing-requested: true kernel-stable-master-bug: 1826036 phase: Testing phase-changed: Friday, 26. April 2019 15:41 UTC proposed-announcement-sent: true proposed-testing-requested: true reason: - automated-testing: Ongoing -- testing in progress + automated-testing: Stalled -- testing FAILED regression-testing: Ongoing -- testing in progress security-signoff: Pending -- waiting for signoff snap-release-to-beta: 'Pending -- snap aws-kernel not in expected channel(s): arch=amd64:channel=latest/beta' snap-release-to-edge: 'Pending -- snap aws-kernel not in expected channel(s): arch=amd64:channel=latest/edge' verification-testing: Ongoing -- testing in progress -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-aws in Ubuntu. https://bugs.launchpad.net/bugs/1826024 Title: linux-aws: 4.4.0-1082.92 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: Incomplete Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Confirmed Status in Kernel SRU Workflow security-signoff series: In Progress Status in Kernel SRU Workflow snap-release-to-beta series: Confirmed Status in Kernel SRU Workflow snap-release-to-candidate series: New Status in Kernel SRU Workflow snap-release-to-edge series: Confirmed Status in Kernel SRU Workflow snap-release-to-stable series: Invalid Status in Kernel SRU Workflow verification-testing series: Confirmed Status in linux-aws package in Ubuntu: Invalid Status in linux-aws source package in Xenial: New Bug description: This bug will contain status and test results related to a kernel source (or snap) as stated in the title. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- boot-testing-requested: true kernel-stable-master-bug: 1826036 phase: Testing phase-changed: Friday, 26. April 2019 15:41 UTC proposed-announcement-sent: true proposed-testing-requested: true reason: automated-testing: Stalled -- testing FAILED regression-testing: Ongoing -- testing in progress security-signoff: Pending -- waiting for signoff snap-release-to-beta: 'Pending -- snap aws-kernel not in expected channel(s): arch=amd64:channel=latest/beta' snap-release-to-edge: 'Pending -- snap aws-kernel not in expected channel(s): arch=amd64:channel=latest/edge' verification-testing: Ongoing -- testing in progress To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1826024/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1776563] Re: Acer Aspire A315 IOAPIC failure on Ubuntu 18.04, kernel hangs, can't load, kernel freeze (AMD Ryzen 5/Radeon/Raven) / AMDGPU Hybrid crash
Sorry, I think I mistakenly tested Ubuntu 18.04.2: so my previous comment is bollocks: I have tested Ubuntu 19.04. It does not work with the new kernel parameters and does not work with no parameters on my A315-41-GU. ( Parameters: https://bugs.launchpad.net/amd/+bug/1776563/comments/445 ) Will test again.. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776563 Title: Acer Aspire A315 IOAPIC failure on Ubuntu 18.04, kernel hangs, can't load, kernel freeze (AMD Ryzen 5/Radeon/Raven) / AMDGPU Hybrid crash Status in amd: Fix Released Status in Linux: Incomplete Status in linux package in Ubuntu: Triaged Bug description: CPU: Ryzen 5 2500U VGA: Radeon 535 Notebook: Acer Aspire A315 This is a brand new notebook on the market with Ryzen 5/Radeon. The default kernel of Ubuntu(18.04) hangs at loading with message: tsc: Refined TSC clocksource calibration: 1996.250 MHz clocksource: tsc: mask: 0x max_cycles: (...), max_idle_ns: (...) Soft lockup Using pci=noacpi kernel parameter kernel loads without any problem but my notebook produces more heat than on Win10. If I know right Acer notebooks need ACPI to the correct power management. The same thing happens on mainline 4.17,4.18rc1-2. BIOS upgrade to the latest version: 1.08 hasn't helped This problem has been reported upstream: https://bugzilla.kernel.org/show_bug.cgi?id=200087 The latest correctly working kernel was 4.13.* but the heat problem was present with this too. To manage notifications about this bug go to: https://bugs.launchpad.net/amd/+bug/1776563/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1826168] Re: linux-gcp: 4.18.0-1010.11 -proposed tracker
** Changed in: kernel-sru-workflow/automated-testing Status: In Progress => Incomplete ** Description changed: This bug will contain status and test results related to a kernel source (or snap) as stated in the title. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: bug 1826167 (bionic/linux-gcp-edge) -- swm properties -- boot-testing-requested: true kernel-stable-master-bug: 1826171 phase: Testing phase-changed: Friday, 26. April 2019 15:47 UTC proposed-announcement-sent: true proposed-testing-requested: true reason: - automated-testing: Ongoing -- testing in progress + automated-testing: Stalled -- testing FAILED regression-testing: Ongoing -- testing in progress security-signoff: Pending -- waiting for signoff verification-testing: Ongoing -- testing in progress -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-gcp in Ubuntu. https://bugs.launchpad.net/bugs/1826168 Title: linux-gcp: 4.18.0-1010.11 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: Incomplete Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Confirmed Status in Kernel SRU Workflow security-signoff series: In Progress Status in Kernel SRU Workflow verification-testing series: Confirmed Status in linux-gcp package in Ubuntu: Invalid Status in linux-gcp source package in Cosmic: New Bug description: This bug will contain status and test results related to a kernel source (or snap) as stated in the title. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: bug 1826167 (bionic/linux-gcp-edge) -- swm properties -- boot-testing-requested: true kernel-stable-master-bug: 1826171 phase: Testing phase-changed: Friday, 26. April 2019 15:47 UTC proposed-announcement-sent: true proposed-testing-requested: true reason: automated-testing: Stalled -- testing FAILED regression-testing: Ongoing -- testing in progress security-signoff: Pending -- waiting for signoff verification-testing: Ongoing -- testing in progress To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1826168/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1550779] Re: [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
I think this issue has been affecting me for a few years now but I just recently started to look into it. My current system is Ubuntu 19.04 but this issue was present even when I was using 18.04 and 18.10 and even before that. OS: Ubuntu 19.04 CPU: Intel Core i7 6700 Graphics (integrated only): HD Graphics 530 (Skylake GT2) Anyway, from time to time only one of my monitors turn on. When that happens `dmesg | grep i915` prints this: ``` ➜ ~ dmesg -e | grep i915 [ +0.000545] i915 :00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ +0.000627] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [ +0.003052] [drm] Initialized i915 1.6.0 20181204 for :00:02.0 on minor 0 [ +0.36] snd_hda_intel :00:1f.3: bound :00:02.0 (ops i915_audio_component_bind_ops [i915]) [ +0.47] i915 :00:02.0: fb0: inteldrmfb frame buffer device [ +0.249846] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun ➜ ~ dmesg -T | grep i915 [Sat Apr 27 17:47:08 2019] i915 :00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [Sat Apr 27 17:47:08 2019] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [Sat Apr 27 17:47:09 2019] [drm] Initialized i915 1.6.0 20181204 for :00:02.0 on minor 0 [Sat Apr 27 17:47:09 2019] snd_hda_intel :00:1f.3: bound :00:02.0 (ops i915_audio_component_bind_ops [i915]) [Sat Apr 27 17:47:09 2019] i915 :00:02.0: fb0: inteldrmfb frame buffer device [Sat Apr 27 17:47:09 2019] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun ``` When I switch to Wayland, sometimes none of my monitors turn on at all. Once when both turned on, I turned off one and tried to turn it back on again, but it went into energy saving mode. Then `dmesg` was showing this: ``` ➜ ~ dmesg -T | grep i915 [Sat Apr 27 18:14:17 2019] i915 :00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [Sat Apr 27 18:14:17 2019] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [Sat Apr 27 18:14:18 2019] [drm] Initialized i915 1.6.0 20181204 for :00:02.0 on minor 0 [Sat Apr 27 18:14:18 2019] snd_hda_intel :00:1f.3: bound :00:02.0 (ops i915_audio_component_bind_ops [i915]) [Sat Apr 27 18:14:18 2019] i915 :00:02.0: fb0: inteldrmfb frame buffer device [Sat Apr 27 18:14:56 2019] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun ➜ ~ dmesg -e | grep i915 [ +0.000664] i915 :00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ +0.000861] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [ +0.016298] [drm] Initialized i915 1.6.0 20181204 for :00:02.0 on minor 0 [ +0.47] snd_hda_intel :00:1f.3: bound :00:02.0 (ops i915_audio_component_bind_ops [i915]) [ +0.47] i915 :00:02.0: fb0: inteldrmfb frame buffer device [ +23.689059] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun ``` I have attached the complete dmesg output in case that might help. ** Attachment added: "dmesg.txt" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1550779/+attachment/5259448/+files/dmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1550779 Title: [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun Status in linux package in Ubuntu: Confirmed Status in xorg-server package in Ubuntu: Incomplete Bug description: Upgraded linux-image-extra-4.2.0-30-generic I see graphic glitches, looks like the graphic buffer gets screwed up - funny repetition's patterns (back in time glitches) - black screen (<1sec) - graphic errors I can influence the severity of the issue with switching windows and using certain programs, e.g. Google Maps in chrome causes this issue reproducibly dmesg | grep i915 [2.726864] [drm] Initialized i915 1.6.0 20150522 for :00:02.0 on minor 0 [2.792005] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [3.471092] i915 :00:02.0: fb0: inteldrmfb frame buffer device [3.471093] i915 :00:02.0: registered panic notifier [9.573129] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun [9.574847] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A [9.574895] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun linux-image-extra-4.2.0-27-generic works find ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 4.2.0-30.36-generic 4.2.8-ckt3 Uname: Linux 4.2.0-30-generic x86_64
[Kernel-packages] [Bug 1826336] Re: linux-oem: 4.15.0-1037.42 -proposed tracker
** Changed in: kernel-sru-workflow/promote-to-proposed Status: New => Confirmed ** Tags added: block-proposed-bionic ** Tags added: block-proposed ** Description changed: This bug will contain status and test results related to a kernel source (or snap) as stated in the title. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- + boot-testing-requested: true kernel-stable-master-bug: 1826358 - phase: Holding before Promote to Proposed - phase-changed: Saturday, 27. April 2019 03:40 UTC + phase: Ready for Promote to Proposed + phase-changed: Saturday, 27. April 2019 06:39 UTC reason: - promote-to-proposed: Holding -- builds not complete in ppa + promote-to-proposed: Pending -- ready for review -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1826336 Title: linux-oem: 4.15.0-1037.42 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: New Status in Kernel SRU Workflow certification-testing series: New Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Confirmed Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: New Status in Kernel SRU Workflow security-signoff series: New Status in Kernel SRU Workflow verification-testing series: New Status in linux-oem package in Ubuntu: Invalid Status in linux-oem source package in Bionic: New Bug description: This bug will contain status and test results related to a kernel source (or snap) as stated in the title. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- boot-testing-requested: true kernel-stable-master-bug: 1826358 phase: Ready for Promote to Proposed phase-changed: Saturday, 27. April 2019 06:39 UTC reason: promote-to-proposed: Pending -- ready for review To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1826336/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1826626] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1826626 Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned Status in linux package in Ubuntu: Confirmed Bug description: upgrade to new ubuntu version failed. ProblemType: Package DistroRelease: Ubuntu 19.04 Package: linux-image-5.0.0-13-generic 5.0.0-13.14 ProcVersionSignature: Ubuntu 5.0.0-13.14-generic 5.0.6 Uname: Linux 5.0.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kunalss1554 F pulseaudio /dev/snd/controlC1: kunalss1554 F pulseaudio Date: Sat Apr 27 09:42:43 2019 ErrorMessage: triggers looping, abandoned HibernationDevice: RESUME=UUID=27221f04-7abb-4a16-8bf9-0d223f3559d6 InstallationDate: Installed on 2016-10-23 (915 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: Dell Inc. Latitude E7250 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-13-generic root=UUID=485acc8d-1178-4d60-baef-b2674d600e32 ro quiet splash vt.handoff=1 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Python3Details: /usr/bin/python3.7, Python 3.7.3, python3-minimal, 3.7.3-1 PythonDetails: N/A RelatedPackageVersions: grub-pc 2.02+dfsg1-12ubuntu2 SourcePackage: linux Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned UpgradeStatus: Upgraded to disco on 2019-04-27 (0 days ago) dmi.bios.date: 05/13/2015 dmi.bios.vendor: Dell Inc. dmi.bios.version: A04 dmi.board.asset.tag: 72608 dmi.board.name: 0V8RX3 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.asset.tag: 72608 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA04:bd05/13/2015:svnDellInc.:pnLatitudeE7250:pvr01:rvnDellInc.:rn0V8RX3:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E7250 dmi.product.sku: Latitude E7250 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1826626/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1826626] Re: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1826626 Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned Status in linux package in Ubuntu: Confirmed Bug description: upgrade to new ubuntu version failed. ProblemType: Package DistroRelease: Ubuntu 19.04 Package: linux-image-5.0.0-13-generic 5.0.0-13.14 ProcVersionSignature: Ubuntu 5.0.0-13.14-generic 5.0.6 Uname: Linux 5.0.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kunalss1554 F pulseaudio /dev/snd/controlC1: kunalss1554 F pulseaudio Date: Sat Apr 27 09:42:43 2019 ErrorMessage: triggers looping, abandoned HibernationDevice: RESUME=UUID=27221f04-7abb-4a16-8bf9-0d223f3559d6 InstallationDate: Installed on 2016-10-23 (915 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: Dell Inc. Latitude E7250 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-13-generic root=UUID=485acc8d-1178-4d60-baef-b2674d600e32 ro quiet splash vt.handoff=1 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Python3Details: /usr/bin/python3.7, Python 3.7.3, python3-minimal, 3.7.3-1 PythonDetails: N/A RelatedPackageVersions: grub-pc 2.02+dfsg1-12ubuntu2 SourcePackage: linux Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned UpgradeStatus: Upgraded to disco on 2019-04-27 (0 days ago) dmi.bios.date: 05/13/2015 dmi.bios.vendor: Dell Inc. dmi.bios.version: A04 dmi.board.asset.tag: 72608 dmi.board.name: 0V8RX3 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.asset.tag: 72608 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA04:bd05/13/2015:svnDellInc.:pnLatitudeE7250:pvr01:rvnDellInc.:rn0V8RX3:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E7250 dmi.product.sku: Latitude E7250 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1826626/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1826626] [NEW] package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned
Public bug reported: upgrade to new ubuntu version failed. ProblemType: Package DistroRelease: Ubuntu 19.04 Package: linux-image-5.0.0-13-generic 5.0.0-13.14 ProcVersionSignature: Ubuntu 5.0.0-13.14-generic 5.0.6 Uname: Linux 5.0.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kunalss1554 F pulseaudio /dev/snd/controlC1: kunalss1554 F pulseaudio Date: Sat Apr 27 09:42:43 2019 ErrorMessage: triggers looping, abandoned HibernationDevice: RESUME=UUID=27221f04-7abb-4a16-8bf9-0d223f3559d6 InstallationDate: Installed on 2016-10-23 (915 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: Dell Inc. Latitude E7250 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-13-generic root=UUID=485acc8d-1178-4d60-baef-b2674d600e32 ro quiet splash vt.handoff=1 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Python3Details: /usr/bin/python3.7, Python 3.7.3, python3-minimal, 3.7.3-1 PythonDetails: N/A RelatedPackageVersions: grub-pc 2.02+dfsg1-12ubuntu2 SourcePackage: linux Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned UpgradeStatus: Upgraded to disco on 2019-04-27 (0 days ago) dmi.bios.date: 05/13/2015 dmi.bios.vendor: Dell Inc. dmi.bios.version: A04 dmi.board.asset.tag: 72608 dmi.board.name: 0V8RX3 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.asset.tag: 72608 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA04:bd05/13/2015:svnDellInc.:pnLatitudeE7250:pvr01:rvnDellInc.:rn0V8RX3:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E7250 dmi.product.sku: Latitude E7250 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-package disco -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1826626 Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned Status in linux package in Ubuntu: Confirmed Bug description: upgrade to new ubuntu version failed. ProblemType: Package DistroRelease: Ubuntu 19.04 Package: linux-image-5.0.0-13-generic 5.0.0-13.14 ProcVersionSignature: Ubuntu 5.0.0-13.14-generic 5.0.6 Uname: Linux 5.0.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kunalss1554 F pulseaudio /dev/snd/controlC1: kunalss1554 F pulseaudio Date: Sat Apr 27 09:42:43 2019 ErrorMessage: triggers looping, abandoned HibernationDevice: RESUME=UUID=27221f04-7abb-4a16-8bf9-0d223f3559d6 InstallationDate: Installed on 2016-10-23 (915 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: Dell Inc. Latitude E7250 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-13-generic root=UUID=485acc8d-1178-4d60-baef-b2674d600e32 ro quiet splash vt.handoff=1 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Python3Details: /usr/bin/python3.7, Python 3.7.3, python3-minimal, 3.7.3-1 PythonDetails: N/A RelatedPackageVersions: grub-pc 2.02+dfsg1-12ubuntu2 SourcePackage: linux Title: package linux-image-5.0.0-13-generic 5.0.0-13.14 failed to install/upgrade: triggers looping, abandoned UpgradeStatus: Upgraded to disco on 2019-04-27 (0 days ago) dmi.bios.date: 05/13/2015 dmi.bios.vendor: Dell Inc. dmi.bios.version: A04 dmi.board.asset.tag: 72608 dmi.board.name: 0V8RX3 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.asset.tag: 72608 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA04:bd05/13/2015:svnDellInc.:pnLatitudeE7250:pvr01:rvnDellInc.:rn0V8RX3:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E7250 dmi.product.sku: Latitude E7250 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1826626/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp