[Kernel-packages] [Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones
@PowerKiKi @John Hoff Does Early Patching as described above by ironincoder fix the problem? If it does, and you post your alsa_info.sh output, I can submit a kernel patch for you. I did so just now for a user named terrydrever who has a Samsung Galaxy Flex Book (NT950QCG-X716) and confirmed that Early Patching fixed the bug. See https://bugzilla.kernel.org/show_bug.cgi?id=207423 for terrydrever's comments. Here's the patch https://bugzilla.kernel.org/attachment.cgi?id=290897.* *This patch will not fix your laptop. The patch tells the driver, snd_hda_intel, to apply the fix if it sees Subsystem Id 0x144dc189, which uniquely identifies the Flex Book. The driver also applys the fix for 3 other Subsystem Ids, see https://github.com/torvalds/linux/blob/master/sound/pci/hda/patch_realtek.c#L7689-L7692. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1851518 Title: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones Status in linux package in Ubuntu: Confirmed Bug description: I've been googling this issue for 10's of hours and tried many things. Relase of Ubuntu: 19.10 Expected outcome: Music plays on the internal speakers and headphones. Actual outcome: I can barely hear audio using headphones with volume turned up to 150%. Absolutely nothing comes out of the speakers. (The speakers sound great under Windows 10.) Complete alsa-info output is attached, but here are some snippets: !!DMI Information !!--- Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: 950SBE/951SBE Product Version: P06RES Firmware Version: P06RES.075.190529.SP Board Vendor: SAMSUNG ELECTRONICS CO., LTD. Board Name:NP950SBE-K01US !!Kernel Information !!-- Kernel release:5.3.0-19-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: k5.3.0-19-generic Library version:1.1.9 Utilities version: 1.1.9 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x604b118000 irq 177 !!PCI Soundcards installed in the system !!-- 00:1f.3 Multimedia audio controller: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 11) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1f.3 0401: 8086:9dc8 (rev 11) DeviceName: Onboard - Sound !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC298 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0298 Subsystem Id: 0x144dc812 Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=8, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC298 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=0 Amp-Out vals: [0x7f 0x7f] Converter: stream=1, channel=0 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: alsa-base
[Kernel-packages] [Bug 1891461] Re: Add proper USB audio support for Lenovo ThinkStation P620
** Patch removed: "pulseaudio_13.99.1-1ubuntu9.debdiff" https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1891461/+attachment/5401382/+files/pulseaudio_13.99.1-1ubuntu9.debdiff -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1891461 Title: Add proper USB audio support for Lenovo ThinkStation P620 Status in alsa-lib package in Ubuntu: New Status in alsa-ucm-conf package in Ubuntu: New Status in pulseaudio package in Ubuntu: In Progress Status in alsa-lib source package in Focal: New Status in alsa-ucm-conf source package in Focal: New Status in pulseaudio source package in Focal: In Progress Status in alsa-lib source package in Groovy: New Status in alsa-ucm-conf source package in Groovy: New Status in pulseaudio source package in Groovy: In Progress Bug description: [Impact] Lenovo ThinkStation P620 uses TRX4 board, which doesn't have PCI audio in its chipset. Instead, it's equipped with two USB audio devices, "Main", which is for internal speaker and front headset, and "Rear", which is for rear panel I/Os. However, both USB audio don't really work out of the box. Issues and fixes will be described together below. [Fix for alsa-lib] 1) Both USB audio devices don't have S/PDIF port, so we need to disable them: https://git.alsa-project.org/?p=alsa-lib.git;a=commit;h=464c2f8b61855cb22d61c4b232f74d6767fac5fb [Fix for alsa-ucm-conf] 2) PulseAudio doesn't assign the correct stream for "Main" device, audio output stays at "Speaker" after "Headset" is selected. So we need UCM to let PulseAudio understand correct stream assignment. In addition to that, in order to not let headset port availability invalidate speaker profile, we need two UCM profiles to separate "Speaker" and "Headset" logically: https://github.com/alsa-project/alsa-ucm-conf/pull/42 [Fix for PulseAudio] 3) USB audio devices, UAC v2 and v3, support jack detection (insertion control). However, PulseAudio doesn't monitor USB jack mixer controls, so jack detection doesn't work at userspace level. We need to let PulseAudio be aware those jacks: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/e153fb870618b1dcf65f6fce1667ea76acc5a28b 4) When a headset gets plugged, PulseAudio switches the profile from "Speaker" to "Headset" automatically. However, when headset gets unplugged, PulseAudio switch the profile from "Headset" to "HDMI", skipping the "Speaker" profile. We need to fix priorities for profiles that are created from UCM to avoid the problem: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/dd70c3c5890ce27b9ba4bd041dea4a01c3e1fc0f [Test] Under g-c-c's Sound tab, "Speaker", "Headphone", "S/PDIF", etc. profiles are all selectable. Sound comes out from speaker even if "Headphone" is chosen. Microphone is already selected though there's no microphone plugged. With the above fix all applied, open Gnome Control Center -> Sound tab. Sink "Speaker" is selected. Only "Speaker" and "HDMI" are in the drop down menu. Plug a headset to front port, "Headphone" and "Microphone" appears and automatically becomes default. Unplug the headset, sink switches back to "Speaker", and source switches to none. Plug line-in, line-out and microphone to the rear panel, jack detection works for all three ports, and they all work correctly. Unplug rear line-in, line-out or microphone makes the option in dropdown menu disappears. On other systems, nothing changed. [Regression Potential] For fix 1) and 2), The UCM in alsa-lib and alsa-ucm-conf strictly match kernel provided profile name, so no other device will be affected. For fix 3), if there are UAC v2/v3 devices claim to support jack detection but don't really support it, this will make the PulseAudio consider its availability to "no". AFAIK, the USB audios that have jack ports are mostly docking stations, which already have their own UCM profiles or PulseAudio profile-sets, so they are unaffected by this change. If we ever see this kind of regression, the proper fix is to disable jack detection from kernel side. For fix 4), if user depends on the old behavior (i.e. switch to another card while other profiles are still available), this will bring a behavioral change. However, all available profiles will still be available after the fix, so users can still be chose the preferred profile from the g-c-c dropdown menu. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1891461/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1837810] Re: KVM: Fix zero_page reference counter overflow when using KSM on KVM compute host
Thanks for fixing it @mruffell! Yes, we did have KSM enabled on the hypervisor where we hit this issue. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1837810 Title: KVM: Fix zero_page reference counter overflow when using KSM on KVM compute host Status in linux package in Ubuntu: Fix Released Status in linux source package in Bionic: In Progress Status in linux source package in Focal: In Progress Bug description: BugLink: https://bugs.launchpad.net/bugs/1837810 [Impact] We are seeing a problem on OpenStack compute nodes, and KVM hosts, where a kernel oops is generated, and all running KVM machines are placed into the pause state. This is caused by the kernel's reserved zero_page reference counter overflowing from a positive number to a negative number, and hitting a (WARN_ON_ONCE(page_ref_count(page) <= 0)) condition in try_get_page(). This only happens if the machine has Kernel Samepage Mapping (KSM) enabled, with "use_zero_pages" turned on. Each time a new VM starts and the kernel does a KSM merge run during a EPT violation, the reference counter for the zero_page is incremented in try_async_pf() and never decremented. Eventually, the reference counter will overflow, causing the KVM subsystem to fail. Syslog: error : qemuMonitorJSONCheckError:392 : internal error: unable to execute QEMU command 'cont': Resetting the Virtual Machine is required QEMU Logs: error: kvm run failed Bad address EAX=000afe00 EBX=000b ECX=0080 EDX=0cfe ESI=0003fe00 EDI=000afe00 EBP=0007 ESP=6d74 EIP=000ee344 EFL=00010002 [---] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0010 00c09300 DPL=0 DS [-WA] CS =0008 00c09b00 DPL=0 CS32 [-RA] SS =0010 00c09300 DPL=0 DS [-WA] DS =0010 00c09300 DPL=0 DS [-WA] FS =0010 00c09300 DPL=0 DS [-WA] GS =0010 00c09300 DPL=0 DS [-WA] LDT= 8200 DPL=0 LDT TR = 8b00 DPL=0 TSS32-busy GDT= 000f7040 0037 IDT= 000f707e CR0=0011 CR2= CR3= CR4= DR0= DR1= DR2= DR3= DR6=0ff0 DR7=0400 EFER= Code=c3 57 56 b8 00 fe 0a 00 be 00 fe 03 00 b9 80 00 00 00 89 c7 a5 a1 00 80 03 00 8b 15 04 80 03 00 a3 00 80 0a 00 89 15 04 80 0a 00 b8 ae e2 00 00 31 Kernel Oops: [ 167.695986] WARNING: CPU: 1 PID: 3016 at /build/linux-hwe-FEhT7y/linux-hwe-4.15.0/include/linux/mm.h:852 follow_page_pte+0x6f4/0x710 [ 167.696023] CPU: 1 PID: 3016 Comm: CPU 0/KVM Tainted: G OE 4.15.0-106-generic #107~16.04.1-Ubuntu [ 167.696023] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 167.696025] RIP: 0010:follow_page_pte+0x6f4/0x710 [ 167.696026] RSP: 0018:a81802023908 EFLAGS: 00010286 [ 167.696027] RAX: ed8786e33a80 RBX: ed878c6d21b0 RCX: 8000 [ 167.696027] RDX: RSI: 3000 RDI: 8001b8cea225 [ 167.696028] RBP: a81802023970 R08: 8001b8cea225 R09: 90c4d55fa340 [ 167.696028] R10: R11: R12: ed8786e33a80 [ 167.696029] R13: 0326 R14: 90c4db94fc50 R15: 90c4d55fa340 [ 167.696030] FS: 7f6a7798c700() GS:90c4edc8() knlGS: [ 167.696030] CS: 0010 DS: ES: CR0: 80050033 [ 167.696031] CR2: CR3: 000315580002 CR4: 00162ee0 [ 167.696033] Call Trace: [ 167.696047] follow_pmd_mask+0x273/0x630 [ 167.696049] follow_page_mask+0x178/0x230 [ 167.696051] __get_user_pages+0xb8/0x740 [ 167.696052] get_user_pages+0x42/0x50 [ 167.696068] __gfn_to_pfn_memslot+0x18b/0x3b0 [kvm] [ 167.696079] ? mmu_set_spte+0x1dd/0x3a0 [kvm] [ 167.696090] try_async_pf+0x66/0x220 [kvm] [ 167.696101] tdp_page_fault+0x14b/0x2b0 [kvm] [ 167.696104] ? vmexit_fill_RSB+0x10/0x40 [kvm_intel] [ 167.696114] kvm_mmu_page_fault+0x62/0x180 [kvm] [ 167.696117] handle_ept_violation+0xbc/0x160 [kvm_intel] [ 167.696119] vmx_handle_exit+0xa5/0x580 [kvm_intel] [ 167.696129] vcpu_enter_guest+0x414/0x1260 [kvm] [ 167.696138] ? kvm_arch_vcpu_load+0x4d/0x280 [kvm] [ 167.696148] kvm_arch_vcpu_ioctl_run+0xd9/0x3d0 [kvm] [ 167.696157] ? kvm_arch_vcpu_ioctl_run+0xd9/0x3d0 [kvm] [ 167.696165] kvm_vcpu_ioctl+0x33a/0x610 [kvm] [ 167.696166] ? do_futex+0x129/0x590 [ 167.696171] ? __switch_to+0x34c/0x4e0 [ 167.696174] ? __switch_to_asm+0x35/0x70 [ 167.696176] do_vfs_ioctl+0xa4/0x600 [ 167.696177] SyS_ioctl+0x79/0x90 [ 167.696180] ? exit_to_usermode_loop+0xa5/0xd0 [ 167.696181]
[Kernel-packages] [Bug 1769236] Re: CPU frequency stuck at minimum value
I can confirm this bug is still there in Ubuntu 20.04 (and from what i did find it already exists at least 13 years!). I think this should get some priority. I have a Dell XPS13 for 1.5 year now and this haunted me ever since. I recently discovered that i can restore normal operation by temporary unplugging the external power a few times. About 1 in 4 times normal operation is restored. I check this using cpufreq-info | grep MHz -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to thermald in Ubuntu. https://bugs.launchpad.net/bugs/1769236 Title: CPU frequency stuck at minimum value Status in linux package in Ubuntu: Confirmed Status in thermald package in Ubuntu: Confirmed Bug description: I installed the Kubuntu variant of Ubuntu 18.04 on a new HP Spectre 13 laptop. Performance is poor. The CPU (an i7-8550U) is running at 400MHz, and never speeds up, even when running some of the Phoronix Test Suite benchmarks. I can use cpupower to switch to the "performance" cpufreq governor, but cannot change the frequency with either governor. Here is the output of some experiments I ran while Phoronix's c-ray test was running. __ gjditchf@copperplate:/var/log$ cat /proc/cpuinfo | grep MHz cpu MHz : 400.008 cpu MHz : 400.002 cpu MHz : 400.002 cpu MHz : 400.003 cpu MHz : 400.005 cpu MHz : 400.003 cpu MHz : 400.001 cpu MHz : 400.004 gjditchf@copperplate:/var/log$ cpupower frequency-info analyzing CPU 0: driver: intel_pstate CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: Cannot determine or is not supported. hardware limits: 400 MHz - 4.00 GHz available cpufreq governors: performance powersave current policy: frequency should be within 400 MHz and 1.60 GHz. The governor "powersave" may decide which speed to use within this range. current CPU frequency: Unable to call hardware current CPU frequency: 400 MHz (asserted by call to kernel) boost state support: Supported: yes Active: yes gjditchf@copperplate:/var/log$ sudo cpupower frequency-set -f 1.60GHz Setting cpu: 0 Error setting new values. Common errors: - Do you have proper administration rights? (super-user?) - Is the governor you requested available and modprobed? - Trying to set an invalid policy? - Trying to set a specific frequency, but userspace governor is not available, for example because of hardware which cannot be set to a specific frequency or because the userspace governor isn't loaded? ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-image-4.15.0-20-generic 4.15.0-20.21 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CurrentDesktop: KDE Date: Fri May 4 12:57:25 2018 InstallationDate: Installed on 2018-04-28 (6 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) SourcePackage: linux-signed UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gjditchf 1190 F pulseaudio CurrentDesktop: KDE DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2018-04-28 (10 days ago) InstallationMedia: Kubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 8087:0a2b Intel Corp. Bus 001 Device 003: ID 0bda:564e Realtek Semiconductor Corp. Bus 001 Device 002: ID 0bda:564f Realtek Semiconductor Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: HP HP Spectre Laptop 13-af0xx Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-20-generic root=UUID=ab54f00a-7dd6-4d75-a664-682f777c841c ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 RelatedPackageVersions: linux-restricted-modules-4.15.0-20-generic N/A linux-backports-modules-4.15.0-20-generic N/A linux-firmware 1.173 Tags: bionic Uname: Linux 4.15.0-20-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin monotone plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 10/13/2017 dmi.bios.vendor: Insyde dmi.bios.version: F.06 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 83A2 dmi.board.vendor: HP dmi.board.version: 55.24 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP
[Kernel-packages] [Bug 1891585] [NEW] alsa/sof: support 1 and 3 dmics
Public bug reported: This is for trackig purpose. ** Affects: hwe-next Importance: High Status: Triaged ** Affects: linux (Ubuntu) Importance: High Status: Triaged ** Affects: linux-firmware (Ubuntu) Importance: High Status: Triaged ** Affects: linux-oem-5.6 (Ubuntu) Importance: High Assignee: Hui Wang (hui.wang) Status: Triaged ** Affects: linux (Ubuntu Focal) Importance: High Status: Triaged ** Affects: linux-firmware (Ubuntu Focal) Importance: High Status: Triaged ** Affects: linux-oem-5.6 (Ubuntu Focal) Importance: High Status: Triaged ** Affects: linux (Ubuntu Groovy) Importance: High Status: Triaged ** Affects: linux-firmware (Ubuntu Groovy) Importance: High Status: Triaged ** Tags: oem-priority originate-from-1890525 somerville ** Also affects: linux (Ubuntu) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Groovy) Importance: Undecided Status: New ** Also affects: linux-oem-5.6 (Ubuntu Groovy) Importance: Undecided Assignee: Hui Wang (hui.wang) Status: New ** Also affects: linux (Ubuntu Focal) Importance: Undecided Status: New ** Also affects: linux-oem-5.6 (Ubuntu Focal) Importance: Undecided Status: New ** No longer affects: linux-oem-5.6 (Ubuntu Groovy) ** Tags added: oem-priority originate-from-1890525 somerville ** Also affects: linux-firmware (Ubuntu) Importance: Undecided Status: New ** Changed in: hwe-next Importance: Undecided => High ** Changed in: linux (Ubuntu Focal) Importance: Undecided => High ** Changed in: linux (Ubuntu Groovy) Importance: Undecided => High ** Changed in: linux-firmware (Ubuntu Focal) Importance: Undecided => High ** Changed in: linux-oem-5.6 (Ubuntu) Importance: Undecided => High ** Changed in: linux-oem-5.6 (Ubuntu Focal) Importance: Undecided => High ** Changed in: linux-firmware (Ubuntu) Importance: Undecided => High ** Changed in: linux (Ubuntu Focal) Status: New => Triaged ** Changed in: linux (Ubuntu Groovy) Status: New => Triaged ** Changed in: linux-firmware (Ubuntu) Status: New => Triaged ** Changed in: linux-firmware (Ubuntu Focal) Status: New => Triaged ** Changed in: linux-oem-5.6 (Ubuntu) Status: New => Triaged ** Changed in: linux-oem-5.6 (Ubuntu Focal) Status: New => Triaged ** Changed in: hwe-next Status: New => Triaged ** No longer affects: linux (Ubuntu Groovy) ** Also affects: linux (Ubuntu Groovy) Importance: High Status: Triaged ** Also affects: linux-firmware (Ubuntu Groovy) Importance: High Status: Triaged ** Also affects: linux-oem-5.6 (Ubuntu Groovy) Importance: High Assignee: Hui Wang (hui.wang) Status: Triaged ** No longer affects: linux-oem-5.6 (Ubuntu Groovy) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1891585 Title: alsa/sof: support 1 and 3 dmics Status in HWE Next: Triaged Status in linux package in Ubuntu: Triaged Status in linux-firmware package in Ubuntu: Triaged Status in linux-oem-5.6 package in Ubuntu: Triaged Status in linux source package in Focal: Triaged Status in linux-firmware source package in Focal: Triaged Status in linux-oem-5.6 source package in Focal: Triaged Status in linux source package in Groovy: Triaged Status in linux-firmware source package in Groovy: Triaged Bug description: This is for trackig purpose. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1891585/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1837810] Re: KVM: Fix zero_page reference counter overflow when using KSM on KVM compute host
** Summary changed: - qemu instance gets paused with error: kvm run failed Bad address + KVM: Fix zero_page reference counter overflow when using KSM on KVM compute host ** Description changed: - We are occasionally running into the below qemu error on our Ubuntu16 - KVM hypervisors managed using Openstack, where the qemu guest instance - gets paused unexpectedly. - - pooja@kvm14:~$ sudo cat /var/log/libvirt/qemu/f8a20654-4c96-4446-95b3-24b8d28fab7f.log.1 + BugLink: https://bugs.launchpad.net/bugs/1837810 + + [Impact] + + We are seeing a problem on OpenStack compute nodes, and KVM hosts, where + a kernel oops is generated, and all running KVM machines are placed into + the pause state. + + This is caused by the kernel's reserved zero_page reference counter + overflowing from a positive number to a negative number, and hitting a + (WARN_ON_ONCE(page_ref_count(page) <= 0)) condition in try_get_page(). + + This only happens if the machine has Kernel Samepage Mapping (KSM) + enabled, with "use_zero_pages" turned on. Each time a new VM starts and + the kernel does a KSM merge run during a EPT violation, the reference + counter for the zero_page is incremented in try_async_pf() and never + decremented. Eventually, the reference counter will overflow, causing + the KVM subsystem to fail. + + Syslog: + error : qemuMonitorJSONCheckError:392 : internal error: unable to execute QEMU command 'cont': Resetting the Virtual Machine is required + + QEMU Logs: error: kvm run failed Bad address - RAX= RBX=8d12ffc01b00 RCX= RDX=8d14d111c040 - RSI=000e RDI=8d15bffda000 RBP=8d156afbb898 RSP=8d156afbb870 - R8 =001e R9 = R10=001d R11=ffd0 - R12=8d14d111c000 R13=f7de0d444700 R14=8d14d111c000 R15=0001 - RIP=9ba1911b RFL=00010082 [--S] CPL=0 II=0 A20=1 SMM=0 HLT=0 - ES = 000f - CS =0010 00a09b00 DPL=0 CS64 [-RA] - SS = 00c0 - DS = 000f - FS = 7f8c7e8ac700 000f - GS = 8d15bfd0 000f - LDT= 000f - TR =0040 8d15bfd04000 2087 8b00 DPL=0 TSS64-busy - GDT= 8d15bfd0c000 007f - IDT= ff528000 0fff - CR0=80050033 CR2=1699e002 CR3=b0d54000 CR4=003606e0 - DR0= DR1= DR2= DR3= - DR6=fffe0ff0 DR7=0400 - EFER=0d01 - Code=44 39 f8 48 63 43 20 0f 8e e1 00 00 00 48 63 53 18 4c 01 e2 <49> 89 14 04 41 0f b7 55 1a 48 63 43 18 41 83 c7 01 66 81 e2 ff 7f 49 01 c4 0f b7 c2 44 39 - 2019-07-16T23:59:30.354240Z qemu-system-x86_64: terminating on signal 15 from pid 7487 (/usr/sbin/libvirtd) - 2019-07-16 23:59:31.549+: shutting down, reason=destroyed - - - We also saw some swap related errors in /var/log/syslog previously: - - Jul 4 08:40:18 kvm14 kernel: \[8084318.769268] audit: type=1400 - audit(1562229618.904:4385): apparmor="STATUS" - operation="profile_replace" profile="unconfined" name="libvirt-a89c8a67 - -24ae-45cb-a885-8880b49f86fd" pid=53770 comm="apparmor_parser" - - Jul 4 08:40:18 kvm14 libvirtd\[20274]: 2019-07-04 08:40:18.911+: - 20277: warning : AppArmorSetFDLabel:1164 : could not find path for - descriptor /proc/self/fd/29, skippingJul 4 08:40:19 kvm13 kernel: - \[8084318.930088] print_req_error: critical medium error, dev nvme0n1, - sector 392710192 - - Jul 4 08:40:19 kvm14 kernel: \[8084318.937754] Read-error on swap- - device (259:0:392710200) - - Jul 4 08:40:19 kvm14 kernel: \[8084318.943157] Read-error on swap- - device (259:0:392710208) - - Wondering if these swap read errors happening intermittently, cause qemu - to pause the guest instance due to memory overcommitment issues. - - pooja@kvm14:~$ lsb_release -a - No LSB modules are available. - Distributor ID: Ubuntu - Description:Ubuntu 16.04.6 LTS - Release:16.04 - Codename: xenial - - pooja@kvm14:~$ /usr/bin/qemu-system-x86_64 --version - QEMU emulator version 2.11.1(Debian 1:2.11+dfsg-1ubuntu7.10~cloud0) - Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers - - pooja@kvm14:~$ dpkg -l | grep libvirt - ii libvirt-bin 4.0.0-1ubuntu8.8~cloud0 amd64programs for the libvirt library - - - Sample qemu process args for an instance created using Openstack Nova (Newton release): - - pooja@kvm14:~$ sudo ps -ef | grep qemu | tail -1 - libvirt+ 52655 1 83 Jun27 ?22-23:37:19 qemu-system-x86_64 -enable-kvm -name guest=157b8c3d-87c6-4a62-a05b-8d1aae47e890,debug-threads=on -S -object secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-567-157b8c3d-87c6-4a62-a/master-key.aes -machine
[Kernel-packages] [Bug 1882433] Re: the boot time rises up to 1min 8s after upgrade to 20.04
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1882433 Title: the boot time rises up to 1min 8s after upgrade to 20.04 Status in linux package in Ubuntu: Expired Bug description: lsb_release -rd Description: Ubuntu 20.04 LTS Release: 20.04 systemd-analyze time Startup finished in 5.406s (kernel) + 1min 8.195s (userspace) = 1min 13.601s graphical.target reached after 1min 7.513s in userspace systemd-analyze blame 28.124s systemd-journal-flush.service 25.826s dev-sda4.device 20.746s plymouth-quit-wait.service 13.192s dev-loop20.device 12.936s dev-loop15.device 12.902s dev-loop19.device 12.790s dev-loop18.device 12.723s plymouth-read-write.service 12.406s dev-loop3.device 12.399s dev-loop21.device 12.366s snapd.service 12.078s dev-loop14.device 11.890s dev-loop13.device 11.248s dev-loop8.device 11.159s dev-loop17.device 11.059s dev-loop11.device 11.047s dev-loop12.device 10.512s dev-loop9.device 10.507s dev-loop1.device 10.504s dev-loop4.device 10.489s dev-loop16.device 9.421s dev-loop7.device 9.404s dev-loop5.device lines 1-23 lscpu Architektur: x86_64 CPU Operationsmodus: 32-bit, 64-bit Byte-Reihenfolge:Little Endian Adressgrößen:36 bits physical, 48 bits virtual CPU(s): 2 Liste der Online-CPU(s): 0,1 Thread(s) pro Kern: 1 Kern(e) pro Socket: 2 Sockel: 1 NUMA-Knoten: 1 Anbieterkennung: GenuineIntel Prozessorfamilie:6 Modell: 76 Modellname: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz Stepping:3 CPU MHz: 887.623 Maximale Taktfrequenz der CPU: 2160, Minimale Taktfrequenz der CPU: 480, BogoMIPS:3200.00 Virtualisierung: VT-x L1d Cache: 48 KiB L1i Cache: 64 KiB L2 Cache:2 MiB NUMA-Knoten0 CPU(s): 0,1 Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Mitigation; Clear CPU buffers; SMT disabled Vulnerability Meltdown: Mitigation; PTI Vulnerability Spec store bypass: Not affected Vulnerability Spectre v1:Mitigation; usercopy/swapgs barriers and __user pointer sanitization Vulnerability Spectre v2:Mitigation; Full generic retpoline, IBRS_FW, ST IBP disabled, RSB filling Vulnerability Tsx async abort: Not affected Markierungen:fpu vme de pse tsc msr pae mce cx8 apic sep mtr r pge mca cmov pat pse36 clflush dts acpi mmx f xsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nop l xtopology tsc_reliable nonstop_tsc cpuid aper fmperf tsc_known_freq pni pclmulqdq dtes64 moni tor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse 4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch epb pti ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid tsc _adjust smep erms dtherm ida arat md_clear ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: plymouth 0.9.4git20200323-0ubuntu6 ProcVersionSignature: Ubuntu 5.4.0-34.38-generic 5.4.41 Uname: Linux 5.4.0-34-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.3 Architecture: amd64 BootLog: Error:
[Kernel-packages] [Bug 1883453] Re: kernel 4.15.0-106 & Cinamon freeze on suspend / resume on hp 6930p
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1883453 Title: kernel 4.15.0-106 & Cinamon freeze on suspend / resume on hp 6930p Status in linux package in Ubuntu: Expired Bug description: https://termbin.com/grid This happens with all kernels > 4.15.0-76 Thank you for your help ! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1883453/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891579] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1891579 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1891579 Title: Security enhanced Ubuntu distribution that would maintain system integrity. Status in linux package in Ubuntu: Incomplete Bug description: A user account allows a user to do restricted tasks. An admin account gives a user full control of the system. If the admin has full control of the system, the admin could cause unintentional damage. The admin should not be allowed to damage the system. A user could be tricked into revealing their admin password. There could be a new user called System, that would not be accessible to the Admin. The System account would have no login. The System account would protect the system from being damaged. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891579/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891579] [NEW] Security enhanced Ubuntu distribution that would maintain system integrity.
Public bug reported: A user account allows a user to do restricted tasks. An admin account gives a user full control of the system. If the admin has full control of the system, the admin could cause unintentional damage. The admin should not be allowed to damage the system. A user could be tricked into revealing their admin password. There could be a new user called System, that would not be accessible to the Admin. The System account would have no login. The System account would protect the system from being damaged. ** Affects: linux (Ubuntu) Importance: Undecided Status: Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1891579 Title: Security enhanced Ubuntu distribution that would maintain system integrity. Status in linux package in Ubuntu: Incomplete Bug description: A user account allows a user to do restricted tasks. An admin account gives a user full control of the system. If the admin has full control of the system, the admin could cause unintentional damage. The admin should not be allowed to damage the system. A user could be tricked into revealing their admin password. There could be a new user called System, that would not be accessible to the Admin. The System account would have no login. The System account would protect the system from being damaged. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891579/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1837810] Re: qemu instance gets paused with error: kvm run failed Bad address
** Also affects: linux (Ubuntu Focal) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Bionic) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Bionic) Status: New => In Progress ** Changed in: linux (Ubuntu Focal) Status: New => In Progress ** Changed in: linux (Ubuntu) Status: Confirmed => Fix Released ** Changed in: linux (Ubuntu Bionic) Importance: Undecided => Medium ** Changed in: linux (Ubuntu Focal) Importance: Undecided => Medium ** Changed in: linux (Ubuntu Bionic) Assignee: (unassigned) => Matthew Ruffell (mruffell) ** Changed in: linux (Ubuntu Focal) Assignee: (unassigned) => Matthew Ruffell (mruffell) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1837810 Title: qemu instance gets paused with error: kvm run failed Bad address Status in linux package in Ubuntu: Fix Released Status in linux source package in Bionic: In Progress Status in linux source package in Focal: In Progress Bug description: We are occasionally running into the below qemu error on our Ubuntu16 KVM hypervisors managed using Openstack, where the qemu guest instance gets paused unexpectedly. pooja@kvm14:~$ sudo cat /var/log/libvirt/qemu/f8a20654-4c96-4446-95b3-24b8d28fab7f.log.1 error: kvm run failed Bad address RAX= RBX=8d12ffc01b00 RCX= RDX=8d14d111c040 RSI=000e RDI=8d15bffda000 RBP=8d156afbb898 RSP=8d156afbb870 R8 =001e R9 = R10=001d R11=ffd0 R12=8d14d111c000 R13=f7de0d444700 R14=8d14d111c000 R15=0001 RIP=9ba1911b RFL=00010082 [--S] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES = 000f CS =0010 00a09b00 DPL=0 CS64 [-RA] SS = 00c0 DS = 000f FS = 7f8c7e8ac700 000f GS = 8d15bfd0 000f LDT= 000f TR =0040 8d15bfd04000 2087 8b00 DPL=0 TSS64-busy GDT= 8d15bfd0c000 007f IDT= ff528000 0fff CR0=80050033 CR2=1699e002 CR3=b0d54000 CR4=003606e0 DR0= DR1= DR2= DR3= DR6=fffe0ff0 DR7=0400 EFER=0d01 Code=44 39 f8 48 63 43 20 0f 8e e1 00 00 00 48 63 53 18 4c 01 e2 <49> 89 14 04 41 0f b7 55 1a 48 63 43 18 41 83 c7 01 66 81 e2 ff 7f 49 01 c4 0f b7 c2 44 39 2019-07-16T23:59:30.354240Z qemu-system-x86_64: terminating on signal 15 from pid 7487 (/usr/sbin/libvirtd) 2019-07-16 23:59:31.549+: shutting down, reason=destroyed We also saw some swap related errors in /var/log/syslog previously: Jul 4 08:40:18 kvm14 kernel: \[8084318.769268] audit: type=1400 audit(1562229618.904:4385): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt- a89c8a67-24ae-45cb-a885-8880b49f86fd" pid=53770 comm="apparmor_parser" Jul 4 08:40:18 kvm14 libvirtd\[20274]: 2019-07-04 08:40:18.911+: 20277: warning : AppArmorSetFDLabel:1164 : could not find path for descriptor /proc/self/fd/29, skippingJul 4 08:40:19 kvm13 kernel: \[8084318.930088] print_req_error: critical medium error, dev nvme0n1, sector 392710192 Jul 4 08:40:19 kvm14 kernel: \[8084318.937754] Read-error on swap- device (259:0:392710200) Jul 4 08:40:19 kvm14 kernel: \[8084318.943157] Read-error on swap- device (259:0:392710208) Wondering if these swap read errors happening intermittently, cause qemu to pause the guest instance due to memory overcommitment issues. pooja@kvm14:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description:Ubuntu 16.04.6 LTS Release:16.04 Codename: xenial pooja@kvm14:~$ /usr/bin/qemu-system-x86_64 --version QEMU emulator version 2.11.1(Debian 1:2.11+dfsg-1ubuntu7.10~cloud0) Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers pooja@kvm14:~$ dpkg -l | grep libvirt ii libvirt-bin 4.0.0-1ubuntu8.8~cloud0 amd64programs for the libvirt library Sample qemu process args for an instance created using Openstack Nova (Newton release): pooja@kvm14:~$ sudo ps -ef | grep qemu | tail -1 libvirt+ 52655 1 83 Jun27 ?22-23:37:19 qemu-system-x86_64 -enable-kvm -name guest=157b8c3d-87c6-4a62-a05b-8d1aae47e890,debug-threads=on -S -object secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-567-157b8c3d-87c6-4a62-a/master-key.aes -machine pc-i440fx-bionic,accel=kvm,usb=off,dump-guest-core=off -cpu Skylake-Server-IBRS -m 8192 -realtime mlock=off -smp 2,sockets=2,cores=1,threads=1
[Kernel-packages] [Bug 1861972] Re: [hns3-0205]sync mainline kernel 5.5rc7 hns3 patchset into ubuntu HWE kernel branch
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1861972 Title: [hns3-0205]sync mainline kernel 5.5rc7 hns3 patchset into ubuntu HWE kernel branch Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: [Bug Description] hns3 patchset have merged into mainline 5.4rc7 kernel. [Steps to Reproduce] 1) 2) 3) [Actual Results] [Expected Results] [Reproducibility] [Additional information] (Firmware version, kernel version, affected hardware, etc. if required): [Resolution] (Fix committed) net: hns3: cleanup some coding style issue (Fix committed) net: hns3: remove redundant print on ENOMEM (Fix committed) net: hns3: delete unnecessary blank line and space for cleanup (Fix committed) net: hns3: rewrite a log in hclge_put_vector() (Fix committed) net: hns3: refine the input parameter 'size' for snprintf() (Fix committed) net: hns3: move duplicated macro definition into header (Fix committed) net: hns3: set VF's default reset_type to HNAE3_NONE_RESET (Fix committed) net: hns3: do not reuse pfmemalloc pages (Fix committed) net: hns3: limit the error logging in the hns3_clean_tx_ring() (Fix committed) net: hns3: replace snprintf with scnprintf in hns3_update_strings (Fix committed) net: hns3: replace snprintf with scnprintf in hns3_dbg_cmd_read (Fix committed) net: hns3: pad the short frame before sending to the hardware To manage notifications about this bug go to: https://bugs.launchpad.net/kunpeng920/+bug/1861972/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1864442] Re: dmaengine: hisilicon: Add Kunpeng DMA engine support
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1864442 Title: dmaengine: hisilicon: Add Kunpeng DMA engine support Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: [Bug Description] This patch adds a driver for HiSilicon Kunpeng DMA engine. This DMA engine which is an PCIe iEP offers 30 channels, each channel has a send queue, a complete queue and an interrupt to help to do tasks. This DMA engine can do memory copy between memory blocks or between memory and device buffer [Steps to Reproduce] 1) 2) 3) [Actual Results] [Expected Results] [Reproducibility] [Additional information] (Firmware version, kernel version, affected hardware, etc. if required): [Resolution] e9f08b65250d dmaengine: hisilicon: Add Kunpeng DMA engine support https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/dma?h=v5.6-rc1=e9f08b65250d73ab70e79e194813f52b8d306784 To manage notifications about this bug go to: https://bugs.launchpad.net/kunpeng920/+bug/1864442/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1864950] Re: [roce-0227]sync mainline kernel 5.6rc3 roce patchset into ubuntu HWE kernel branch
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1864950 Title: [roce-0227]sync mainline kernel 5.6rc3 roce patchset into ubuntu HWE kernel branch Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: [Bug Description] roce patchset have merged into mainline 5.6rc2 kernel. [Steps to Reproduce] 1) 2) 3) [Actual Results] [Expected Results] [Reproducibility] [Additional information] (Firmware version, kernel version, affected hardware, etc. if required): [Resolution] RDMA/hns: Optimize eqe buffer allocation flow RDMA/hns: Cleanups of magic numbers RDMA/hns: fix spelling mistake: "attatch" -> "attach" RDMA/hns: Delayed flush cqe process with workqueue RDMA/hns: Add the workqueue framework for flush cqe handler RDMA/hns: Initialize all fields of doorbells to zero RDMA/hns: Optimize qp doorbell allocation flow RDMA/hns: Optimize kernel qp wrid allocation flow RDMA/hns: Optimize qp param setup flow RDMA/hns: Optimize qp buffer allocation flow RDMA/hns: Optimize qp number assign flow RDMA/hns: Optimize qp context create and destroy flow RDMA/hns: Optimize qp destroy flow RDMA/hns: Stop doorbell update while qp state error RDMA/hns: Use flush framework for the case in aeq RDMA/hns: Treat revision HIP08_A as a special case https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git/log/?h=wip /jgg-for-next RDMA/hns: Treat revision HIP08_A as a special case https://www.spinics.net/lists/linux-rdma/msg89428.html RDMA/hns: Support to set mininum depth of qp to 0 https://patchwork.kernel.org/patch/11415067/ To manage notifications about this bug go to: https://bugs.launchpad.net/kunpeng920/+bug/1864950/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1861976] Re: [acc-0205]sync mainline kernel 5.5rc6 acc patchset into ubuntu HWE kernel branch
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1861976 Title: [acc-0205]sync mainline kernel 5.5rc6 acc patchset into ubuntu HWE kernel branch Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: [Bug Description] acc patchset have merged into mainline 5.5rc6 kernel. [Steps to Reproduce] 1) 2) 3) [Actual Results] [Expected Results] [Reproducibility] [Additional information] (Firmware version, kernel version, affected hardware, etc. if required): [Resolution] crypto: hisilicon - fix spelling mistake "disgest" -> "digest" crypto: hisilicon - add branch prediction macro crypto: hisilicon - adjust hpre_crt_para_get crypto: hisilicon - Fixed some tiny bugs of HPRE crypto: hisilicon - Bugfixed tfm leak crypto: hisilicon - Add aead support on SEC2 crypto: hisilicon - redefine skcipher initiation crypto: hisilicon - Add branch prediction macro crypto: hisilicon - Add callback error check crypto: hisilicon - Adjust some inner logic crypto: hisilicon - Update QP resources of SEC V2 crypto: hisilicon - Update some names on SEC V2 crypto: hisilicon - fix print/comment of SEC V2 crypto: hisilicon - Update debugfs usage of SEC V2 To manage notifications about this bug go to: https://bugs.launchpad.net/kunpeng920/+bug/1861976/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1863575] Re: [hns3-0217]sync mainline kernel 5.6rc1 hns3 patchset into ubuntu HWE kernel branch
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1863575 Title: [hns3-0217]sync mainline kernel 5.6rc1 hns3 patchset into ubuntu HWE kernel branch Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: [Bug Description] hns3 patchset have merged into mainline 5.6rc1 kernel. [Steps to Reproduce] 1) 2) 3) [Actual Results] [Expected Results] [Reproducibility] [Additional information] (Firmware version, kernel version, affected hardware, etc. if required): [Resolution] net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples() net: hns3: fix VF bandwidth does not take effect in some case net: hns3: add management table after IMP reset [Status] (Fix committed) 47327c9315b2 net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples() (Fix committed) 19eb1123b4e9 net: hns3: fix VF bandwidth does not take effect in some case (Fix committed) d0db7ed39751 net: hns3: add management table after IMP reset To manage notifications about this bug go to: https://bugs.launchpad.net/kunpeng920/+bug/1863575/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1860401] Re: [sfc-0121]enable the HiSilicon v3xx SFC driver
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1860401 Title: [sfc-0121]enable the HiSilicon v3xx SFC driver Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: [Bug Description] enable the HiSilicon v3xx SFC driver [Steps to Reproduce] 1) 2) 3) [Actual Results] [Expected Results] [Reproducibility] [Additional information] (Firmware version, kernel version, affected hardware, etc. if required): [Resolution] MAINTAINERS: Add a maintainer for the HiSilicon v3xx SFC driver spi: Add HiSilicon v3xx SPI NOR flash controller driver mtd: spi-nor: Fix the writing of the Status Register on micron flashes To manage notifications about this bug go to: https://bugs.launchpad.net/kunpeng920/+bug/1860401/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1867587] Re: [sas-0316]sync mainline kernel 5.6rc1 sas patchset into ubuntu HWE kernel branch
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1867587 Title: [sas-0316]sync mainline kernel 5.6rc1 sas patchset into ubuntu HWE kernel branch Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: [Bug Description] SAS patchset have merged into mainline 5.6rc1 kernel. [Steps to Reproduce] 1) 2) 3) [Actual Results] [Expected Results] [Reproducibility] [Additional information] (Firmware version, kernel version, affected hardware, etc. if required): [Resolution] scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity scsi: hisi_sas: Modify the file permissions of trigger_dump to write only scsi: hisi_sas: Replace magic number when handle channel interrupt scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock scsi: hisi_sas: use threaded irq to process CQ interrupts To manage notifications about this bug go to: https://bugs.launchpad.net/kunpeng920/+bug/1867587/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1867586] Re: [hns3-0316]sync mainline kernel 5.6rc4 hns3 patchset into ubuntu HWE kernel branch
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1867586 Title: [hns3-0316]sync mainline kernel 5.6rc4 hns3 patchset into ubuntu HWE kernel branch Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: [Bug Description] hns3 patchset have merged into mainline 5.6rc1 kernel. [Steps to Reproduce] 1) 2) 3) [Actual Results] [Expected Results] [Reproducibility] [Additional information] (Firmware version, kernel version, affected hardware, etc. if required): [Resolution] net: hns3: clear port base VLAN when unload PF net: hns3: fix RMW issue for VLAN filter switch net: hns3: fix VF VLAN table entries inconsistent issue net: hns3: fix "tc qdisc del" failed issue net: hns3: reject unsupported coalescing params net: hns3: delete unnecessary logs after kzalloc fails net: hns3: synchronize some print relating to reset issue net: hns3: print out command code when dump fails in debugfs net: hns3: print out status register when VF receives unknown source interrupt net: hns3: add a check before PF inform VF to reset net: hns3: delete some reduandant code net: hns3: remove an unnecessary resetting check in hclge_handle_hw_ras_error() net: hns3: rename macro HCLGE_MAX_NCL_CONFIG_LENGTH net: hns3: fix some mixed type assignment net: hns3: fix a not link up issue when fibre port supports autoneg net: hns3: add missing help info for QS shaper in debugfs net: hns3: add support for dump MAC ID and loopback status in debugfs net: hns3: add enabled TC numbers and DWRR weight info in debugfs net: hns3: modify an unsuitable print when setting unknown duplex to fibre [Status] (Rejected) net: hns3: reject unsupported coalescing params (Fix committed) net: hns3: delete unnecessary logs after kzalloc fails (Fix committed) net: hns3: synchronize some print relating to reset issue (Fix committed) net: hns3: print out command code when dump fails in debugfs (Fix committed) net: hns3: print out status register when VF receives unknown source interrupt (Fix committed) net: hns3: add a check before PF inform VF to reset (Fix committed) net: hns3: delete some reduandant code (Fix committed) net: hns3: remove an unnecessary resetting check in hclge_handle_hw_ras_error() (Fix committed) net: hns3: rename macro HCLGE_MAX_NCL_CONFIG_LENGTH (Fix committed) net: hns3: fix some mixed type assignment (Fix committed) net: hns3: add missing help info for QS shaper in debugfs (Fix committed) net: hns3: add support for dump MAC ID and loopback status in debugfs (Fix committed) net: hns3: add enabled TC numbers and DWRR weight info in debugfs (Fix committed) net: hns3: modify an unsuitable print when setting unknown duplex to fibre (Fix committed) net: hns3: clear port base VLAN when unload PF (Fix committed) net: hns3: fix RMW issue for VLAN filter switch (Fix committed) net: hns3: fix VF VLAN table entries inconsistent issue (Fix committed) net: hns3: fix "tc qdisc del" failed issue (Fix committed) net: hns3: fix a not link up issue when fibre port supports autoneg To manage notifications about this bug go to: https://bugs.launchpad.net/kunpeng920/+bug/1867586/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1867588] Re: [SFC-0316]sync mainline kernel 5.7rc1 SFC patchset into ubuntu HWE kernel branch
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1867588 Title: [SFC-0316]sync mainline kernel 5.7rc1 SFC patchset into ubuntu HWE kernel branch Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: [Bug Description] SFC patchset have merged into mainline 5.7RC1rc2 kernel. [Steps to Reproduce] 1) 2) 3) [Actual Results] [Expected Results] [Reproducibility] [Additional information] (Firmware version, kernel version, affected hardware, etc. if required): [Resolution] spi: HiSilicon v3xx: Use DMI quirk to set controller buswidth override bits spi: HiSilicon v3xx: Properly set CMD_CONFIG for Dual/Quad modes spi: Allow SPI controller override device buswidth To manage notifications about this bug go to: https://bugs.launchpad.net/kunpeng920/+bug/1867588/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1854548] Re: [sas-1130]enable sas DFX Function for 1620 soc
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1854548 Title: [sas-1130]enable sas DFX Function for 1620 soc Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04 series: Won't Fix Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-19.04 series: Won't Fix Status in kunpeng920 ubuntu-19.10 series: Won't Fix Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: [Bug Description] enable sas DFX Function for 1620 soc [Steps to Reproduce] 1) 2) 3) [Actual Results] [Expected Results] [Reproducibility] [Additional information] (Firmware version, kernel version, affected hardware, etc. if required): [Resolution] scsi: hisi_sas: Record the phy down event in debugfs scsi: hisi_sas: Delete the debugfs folder of hisi_sas when the probe fails scsi: hisi_sas: Add ability to have multiple debugfs dumps scsi: hisi_sas: Add module parameter for debugfs dump count scsi: hisi_sas: Allocate memory for multiple dumps of debugfs scsi: hisi_sas: Add debugfs file structure for ITCT cache scsi: hisi_sas: Add debugfs file structure for IOST cache scsi: hisi_sas: Add debugfs file structure for ITCT scsi: hisi_sas: Add debugfs file structure for IOST scsi: hisi_sas: Add debugfs file structure for port scsi: hisi_sas: Add debugfs file structure for registers scsi: hisi_sas: Add debugfs file structure for DQ scsi: hisi_sas: Add debugfs file structure for CQ scsi: hisi_sas: Add timestamp for a debugfs dump scsi: hisi_sas: Relocate call to hisi_sas_debugfs_exit() scsi: hisi_sas: Fix pointer usage error in show debugfs IOST/ITCT scsi: hisi_sas: Snapshot HW cache of IOST and ITCT at debugfs scsi: hisi_sas: Snapshot AXI and RAS register at debugfs scsi: hisi_sas: add debugfs auto-trigger for internal abort time out scsi: hisi_sas: Add BIST support for phy loopback scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation scsi: hisi_sas: Set the BIST init value before enabling BIST scsi: hisi_sas: Don't create debugfs dump folder twice UPDATE: Include the following patch, as it is also debugfs related: scsi: hisi_sas: Relocate call to hisi_sas_debugfs_exit() To manage notifications about this bug go to: https://bugs.launchpad.net/kunpeng920/+bug/1854548/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1854549] Re: [acc-1130]sync mainline kernel 5.5rc1 acc patchset into ubuntu HWE kernel branch
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1854549 Title: [acc-1130]sync mainline kernel 5.5rc1 acc patchset into ubuntu HWE kernel branch Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04 series: Won't Fix Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-19.04 series: Won't Fix Status in kunpeng920 ubuntu-19.10 series: Won't Fix Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: [Bug Description] enable 1620 acc function for kunpeng 920 [Steps to Reproduce] 1) 2) 3) [Actual Results] [Expected Results] [Reproducibility] [Additional information] (Firmware version, kernel version, affected hardware, etc. if required): [Resolution] MAINTAINERS: Add maintainer for HiSilicon trng V2 driver hw_random: add HiSilicon TRNG driver support MAINTAINERS: Add maintainer for HiSilicon SEC V2 driver crypto: hisilicon - add DebugFS for HiSilicon SEC Documentation: add DebugFS doc for HiSilicon SEC crypto: hisilicon - add SRIOV for HiSilicon SEC crypto: hisilicon - add HiSilicon SEC V2 driver crypto: hisilicon - use sgl API to get sgl dma addr and len crypto: hisilicon - replace #ifdef with IS_ENABLED for CONFIG_NUMA crypto: hisilicon - no need to check return value of debugfs_create functions crypto: hisilicon - fix to return sub-optimal device when best device has no qps crypto: hisilicon - add vfs_num module param for zip crypto: hisilicon - fix endianness verification problem of QM crypto: hisilicon - fix param should be static when not external. crypto: hisilicon - Fix using plain integer as NULL pointer crypto: hisilicon - tiny fix about QM/ZIP error callback print crypto: hisilicon: Fix misuse of GENMASK macro crypto: hisilicon - select NEED_SG_DMA_LENGTH in qm Kconfig crypto: hisilicon - misc fix about sgl crypto: hisilicon - fix large sgl memory allocation problem when disable smmu crypto: hisilicon - add sgl_sge_nr module param for zip crypto: hisilicon - merge sgl support to hisi_qm module crypto: hisilicon - allow compile-testing on x86 crypto: hisilicon - select CRYPTO_LIB_DES while compiling SEC driver To manage notifications about this bug go to: https://bugs.launchpad.net/kunpeng920/+bug/1854549/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1855958] Re: scsi: hisi_sas: Return directly if init hardware failed
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1855958 Title: scsi: hisi_sas: Return directly if init hardware failed Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04 series: Invalid Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-19.04 series: Invalid Status in kunpeng920 ubuntu-19.10 series: Invalid Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: [Impact] The 5.4 introduced a regression that could potentially lead to a crash during resume. [Test Case] Regression tested only. [Fix] 547fde8b5a192 scsi: hisi_sas: Return directly if init hardware failed [Regression Risk] Code change is restricted to the hisi_sas driver. To manage notifications about this bug go to: https://bugs.launchpad.net/kunpeng920/+bug/1855958/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1859261] Re: [hns3-0111]sync mainline kernel 5.5rc6 hns3 patchset into ubuntu HWE kernel branch Edit
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1859261 Title: [hns3-0111]sync mainline kernel 5.5rc6 hns3 patchset into ubuntu HWE kernel branch Edit Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: [Bug Description] hns3 patchset have merged into mainline 5.4rc5 kernel. Pls backport ubuntu 18.04.5 kernel version [Steps to Reproduce] 1) 2) 3) [Actual Results] [Expected Results] [Reproducibility] [Additional information] (Firmware version, kernel version, affected hardware, etc. if required): [Resolution] net: hns3: support tx-scatter-gather-fraglist feature net: hns3: add support for configuring VF MAC from the host net: hns3: add support for configuring bandwidth of VF on the host net: hns3: add support for setting VF trust net: hns3: add support for spoof check setting net: hns3: add support for setting VF link status on the host net: hns3: make array tick_array static, makes object smaller net: hns3: fix a wrong reset interrupt status mask net: hns3: cleanup of stray struct hns3_link_mode_mapping net: hns3: fix ETS bandwidth validation bug net: hns3: reallocate SSU' buffer size when pfc_en changes net: hns3: add compatible handling for MAC VLAN switch parameter configuration net: hns3: add compatible handling for command HCLGE_OPC_PF_RST_DONE net: hns3: remove unused macros net: hns3: Use the correct style for SPDX License Identifier net: hns3: cleanup byte order issues when printed net: hns3: cleanup some print format warning net: hns3: add or modify some comments net: hns3: optimize local variable initialization net: hns3: cleanup a format-truncation warning net: hns3: cleanup some coding style issues net: hns3: cleanup some magic numbers net: hns3: add struct netdev_queue debug info for TX timeout net: hns3: dump some debug information when reset fail treewide: Use sizeof_member() macro net: hns3: log and clear hardware error after reset complete net: hns3: do not allocate linear data for fraglist skb net: hns3: minor cleanup for hns3_handle_rx_bd() net: hns3: make struct hns3_enet_ring cacheline aligned net: hns3: introduce ring_to_netdev() in enet module net: hns3: minor optimization for barrier in IO path net: hns3: optimized MAC address in management table. net: hns3: remove struct hns3_nic_ring_data in hns3_enet module net: hns3: fix mis-counting IRQ vector numbers issue net: hns3: fix VF ID issue for setting VF VLAN net: hns3: fix a use after free problem in hns3_nic_maybe_stop_tx() net: hns3: fix for TX queue not restarted problem net: hns3: only print misc interrupt status when handling fails net: hns3: add a log for getting chain failure in hns3_nic_uninit_vector_data() net: hns3: add some VF VLAN information for command "ip link show" net: hns3: implement ndo_features_check ops for hns3 driver net: hns3: get FD rules location before dump in debugfs net: hns3: optimization for CMDQ uninitialization net: hns3: remove useless mutex vport_cfg_mutex in the struct hclge_dev net: hns3: check FE bit before calling hns3_add_frag() net: hns3: do not schedule the periodic task when reset fail net: hns3: allocate WQ with WQ_MEM_RECLAIM flag net: hns3: remove unnecessary work in hclgevf_main net: hns3: remove mailbox and reset work in hclge_main net: hns3: schedule hclgevf_service by using delayed workqueue net: hns3: refactor the notification scheme of PF reset net: hns3: refactor the procedure of VF FLR net: hns3: modify hclge_func_reset_sync_vf()'s return type to void net: hns3: enlarge HCLGE_RESET_WAIT_CNT net: hns3: refactor the precedure of PF FLR net: hns3: split hclgevf_reset() into preparing and rebuilding part net: hns3: split hclge_reset() into preparing and rebuilding part net: hns3: modify an unsuitable reset level for hardware error net: hns3: replace an unsuitable variable type in hclge_inform_reset_assert_to_vf() net: hns3: add protection when get SFP speed as 0 net: hns3: modify the IRQ name of misc vectors net: hns3: modify an unsuitable log in hclge_map_ring_to_vector() net: hns3: modify the IRQ name of TQP vector net: hns3: re-organize vector handle net: hns3: add trace event support for HNS3 driver update 0120 net: hns3: pad the short frame before sending to the hardware [Status] (Fix committed): net: hns3: support tx-scatter-gather-fraglist feature (Fix committed): net: hns3: add support for
[Kernel-packages] [Bug 1859269] Re: [roce-0111]sync mainline kernel 5.5rc6 roce patchset into ubuntu HWE kernel branch
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1859269 Title: [roce-0111]sync mainline kernel 5.5rc6 roce patchset into ubuntu HWE kernel branch Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: [Bug Description] roce patchset have merged into mainline 5.5rc6 kernel. Pls backport ubuntu 18.04.5 kernel version [Steps to Reproduce] 1) 2) 3) [Actual Results] [Expected Results] [Reproducibility] [Additional information] (Firmware version, kernel version, affected hardware, etc. if required): [Resolution] RDMA/hns: Delete unnecessary callback functions for cq RDMA/hns: Rename the functions used inside creating cq RDMA/hns: Redefine the member of hns_roce_cq struct RDMA/hns: Redefine interfaces used in creating cq IB/umem: remove the dmasync argument to ib_umem_get RDMA/hns: Modify appropriate printings RDMA/hns: Fix non-standard error codes RDMA/hns: Modify hns_roce_hw_v2_get_cfg to simplify the code RDMA/hns: Simplify doorbell initialization code RDMA/hns: Replace not intuitive function/macro names RDMA/hns: Modify fields of struct hns_roce_srq RDMA/hns: Delete unnecessary uar from hns_roce_cq RDMA/hns: Remove unnecessary structure hns_roce_sqp RDMA/hns: Delete unnecessary variable max_post RDMA/hns: Remove unsupported modify_port callback RDMA: Connect between the mmap entry and the umap_priv structure RDMA/hns: Fix build error again RDMA/hns: Fix memory leak on 'context' on error return path RDMA/hns: Bugfix for qpc/cqc timer configuration RDMA/hns: Fix to support 64K page for srq RDMA/hns: Delete BITS_PER_BYTE redefinition RDMA/hns: Prevent undefined behavior in hns_roce_set_user_sq_size() RDMA/hns: Release qp resources when failed to destroy qp RDMA/hns: Fix a spelling mistake in a macro RDMA/hns: Modify return value of restrack functions RDMA/hns: Modify variable/field name from vlan to vlan_id RDMA/hns: Fix wrong parameters when initial mtt of srq->idx_que RDMA/hns: remove a redundant le16_to_cpu RDMA/hns: Prevent memory leaks of eq->buf_list RDMA/hns: Correct the value of srq_desc_size RDMA/hns: Correct the value of HNS_ROCE_HEM_CHUNK_LEN RDMA/hns: Add support for reporting wc as software mode RDMA/hns: Bugfix for posting a wqe with sge RDMA/hns: Fix coding style issues RDMA/hns: Replace custom macros HNS_ROCE_ALIGN_UP RDMA/hns: Remove redundant print information RDMA/hns: Delete unnessary parameters in hns_roce_v2_qp_modify() RDMA/hns: Update the value of qp type RDMA/hns: Remove unused function hns_roce_init_eq_table() RDMA/hns: Avoid printing address of mtt page RDMA/hns: Simplify the calculation and usage of wqe idx for post verbs update 01120 RDMA/hns: Get pf capabilities from firmware RDMA/hns: Add interfaces to get pf capabilities from firmware RDMA/hns: Remove some redundant variables related to capabilities RDMA/hns: Add support for extended atomic in userspace [Status] (Fix committed): RDMA/hns: Delete unnecessary callback functions for cq (Fix committed): RDMA/hns: Rename the functions used inside creating cq (Fix committed): RDMA/hns: Redefine the member of hns_roce_cq struct (Fix committed): RDMA/hns: Redefine interfaces used in creating cq (Fix committed): IB/umem: remove the dmasync argument to ib_umem_get (Fix committed): RDMA/hns: Modify appropriate printings (Fix committed): RDMA/hns: Fix non-standard error codes (Fix committed): RDMA/hns: Modify hns_roce_hw_v2_get_cfg to simplify the code (Fix committed): RDMA/hns: Simplify doorbell initialization code (Fix committed): RDMA/hns: Replace not intuitive function/macro names (Fix committed): RDMA/hns: Modify fields of struct hns_roce_srq (Fix committed): RDMA/hns: Delete unnecessary uar from hns_roce_cq (Fix committed): RDMA/hns: Remove unnecessary structure hns_roce_sqp (Fix committed): RDMA/hns: Delete unnecessary variable max_post (Fix committed): RDMA/hns: Remove unsupported modify_port callback (Fix committed): RDMA: Connect between the mmap entry and the umap_priv structure (Fix committed): RDMA/hns: Fix build error again (Fix committed): RDMA/hns: Fix memory leak on 'context' on error return path (Fix committed): RDMA/hns: Bugfix for qpc/cqc timer configuration (Fix committed): RDMA/hns: Fix to support 64K page for srq (Fix committed): RDMA/hns: Delete BITS_PER_BYTE redefinition (Fix committed): RDMA/hns: Prevent undefined behavior in
[Kernel-packages] [Bug 1850117] Re: [hpre-1017]sync mainline kernel 5.4rc3 hpre patchset into ubuntu HWE kernel branch
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1850117 Title: [hpre-1017]sync mainline kernel 5.4rc3 hpre patchset into ubuntu HWE kernel branch Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04 series: Won't Fix Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-19.04 series: Won't Fix Status in kunpeng920 ubuntu-19.10 series: Won't Fix Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Status in linux source package in Eoan: Invalid Status in linux source package in Focal: Fix Released Bug description: [Bug Description] hpre patchset have merged into mainline 5.4rc3 kernel. Can use this hpre patchset to release UOSE basing this ubuntu 18.04.4 kernel branch, then merge into ubuntu 18.04.4 version. [Steps to Reproduce] 1) 2) 3) [Actual Results] [Expected Results] [Reproducibility] [Additional information] (Firmware version, kernel version, affected hardware, etc. if required): [Resolution] crypto: hisilicon - add HiSilicon HPRE accelerator crypto: hisilicon - add SRIOV support for HPRE Documentation: Add debugfs doc for hisi_hpre crypto: hisilicon: Add debugfs for HPRE MAINTAINERS: Add maintainer for HiSilicon HPRE driver https://www.mail-archive.com/linux- cry...@vger.kernel.org/msg40969.html To manage notifications about this bug go to: https://bugs.launchpad.net/kunpeng920/+bug/1850117/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1853999] Re: [sas-1126]scsi: hisi_sas: use wait_for_completion_timeout() when clearing ITCT
** Changed in: kunpeng920/ubuntu-18.04-hwe Status: Fix Committed => Fix Released ** Changed in: kunpeng920 Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1853999 Title: [sas-1126]scsi: hisi_sas: use wait_for_completion_timeout() when clearing ITCT Status in kunpeng920: Fix Released Status in kunpeng920 ubuntu-18.04 series: Won't Fix Status in kunpeng920 ubuntu-18.04-hwe series: Fix Released Status in kunpeng920 ubuntu-19.04 series: Won't Fix Status in kunpeng920 ubuntu-19.10 series: Won't Fix Status in kunpeng920 ubuntu-20.04 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: "[Steps to Reproduce] 1. Close all the PHYS; 2. Inject error; 3. Open one PHY; [Actual Results] System is suspended HGC_DQE_POISON_INTR [ 2511.679429] hisi_sas_v3_hw :74:02.0: phydown: phy0 phy_state=0xfe [ 2511.685869] hisi_sas_v3_hw :74:02.0: phydown: phy1 phy_state=0x0 [ 2511.685953] sas: REVALIDATING DOMAIN on port 0, pid:7 [ 2511.692213] hisi_sas_v3_hw :74:02.0: phydown: phy2 phy_state=0x0 [ 2511.692218] hisi_sas_v3_hw :74:02.0: phydown: phy3 phy_state=0x0 [ 2511.697262] hisi_sas_v3_hw :74:02.0: task prep: SAS port0 not attach device [ 2511.703594] hisi_sas_v3_hw :74:02.0: phydown: phy4 phy_state=0x0 [ 2511.703598] hisi_sas_v3_hw :74:02.0: phydown: phy5 phy_state=0x0 [ 2511.709940] hisi_sas_v3_hw :74:02.0: task exec: failed[-70]! [ 2511.717234] hisi_sas_v3_hw :74:02.0: phydown: phy6 phy_state=0x0 [ 2511.717239] hisi_sas_v3_hw :74:02.0: phydown: phy7 phy_state=0x0 [ 2511.740405] hisi_sas_v3_hw :74:02.0: phyup: phy6 link_rate=11 [ 2511.742338] sas: executing SMP task failed:-70 [ 2511.759194] sas: done REVALIDATING DOMAIN on port 0, pid:7 [ 2511.764686] sas: REVALIDATING DOMAIN on port 0, pid:7 [ 2511.769731] hisi_sas_v3_hw :74:02.0: task prep: SAS port0 not attach device [ 2511.777033] hisi_sas_v3_hw :74:02.0: task exec: failed[-70]! [ 2511.783033] sas: executing SMP task failed:-70 [ 2511.787467] sas: done REVALIDATING DOMAIN on port 0, pid:7 [ 2511.792954] sas: REVALIDATING DOMAIN on port 0, pid:7 [ 2511.797997] hisi_sas_v3_hw :74:02.0: task prep: SAS port0 not attach device [ 2511.805295] hisi_sas_v3_hw :74:02.0: task exec: failed[-70]! [ 2511.811291] sas: executing SMP task failed:-70 [ 2511.815727] sas: done REVALIDATING DOMAIN on port 0, pid:7 [ 2511.821212] sas: REVALIDATING DOMAIN on port 0, pid:7 [ 2511.826256] hisi_sas_v3_hw :74:02.0: task prep: SAS port0 not attach device [ 2511.833555] hisi_sas_v3_hw :74:02.0: task exec: failed[-70]! [ 2511.839553] sas: executing SMP task failed:-70 [ 2511.843986] sas: done REVALIDATING DOMAIN on port 0, pid:7 [ 2511.849474] sas: REVALIDATING DOMAIN on port 0, pid:7 [ 2511.854518] hisi_sas_v3_hw :74:02.0: task prep: SAS port0 not attach device [ 2511.861817] hisi_sas_v3_hw :74:02.0: task exec: failed[-70]! [ 2511.867814] sas: executing SMP task failed:-70 [ 2511.872248] sas: done REVALIDATING DOMAIN on port 0, pid:7 [ 2511.877734] sas: REVALIDATING DOMAIN on port 0, pid:7 [ 2511.882780] hisi_sas_v3_hw :74:02.0: task prep: SAS port0 not attach device [ 2511.890079] hisi_sas_v3_hw :74:02.0: task exec: failed[-70]! [ 2511.896076] sas: executing SMP task failed:-70 [ 2511.900510] sas: done REVALIDATING DOMAIN on port 0, pid:7 [ 2511.905997] sas: REVALIDATING DOMAIN on port 0, pid:7 [ 2511.911042] hisi_sas_v3_hw :74:02.0: task prep: SAS port0 not attach device [ 2511.918341] hisi_sas_v3_hw :74:02.0: task exec: failed[-70]! [ 2511.924338] sas: executing SMP task failed:-70 [ 2511.928771] sas: done REVALIDATING DOMAIN on port 0, pid:7 [ 2511.935668] hisi_sas_v3_hw :74:02.0: dev[29:1] is gone [ 2511.941163] hisi_sas_v3_hw :74:02.0: DQE_AXI_R_ERR error (0x40800) found! [ 2511.941173] arm-smmu-v3 arm-smmu-v3.3.auto: event 0x10 received: [ 2512.003017] {91}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 2512.003019] {91}[Hardware Error]: event severity: recoverable [ 2512.003021] {91}[Hardware Error]: Error 0, type: recoverable [ 2512.003022] {91}[Hardware Error]: section type: unknown, 1f8161e1-55d6-41e6-bd10-7afd1dc5f7c5 [ 2512.003023] {91}[Hardware Error]: section length: 0x28 [ 2512.003026] {91}[Hardware Error]: : 03ff 0100 000f [ 2512.003027] {91}[Hardware Error]: 0010: 0010 0004 [ 2512.003028] {91}[Hardware Error]: 0020: [ 2512.005832] hisi_sas_v3_hw :74:02.0: read dqe poison error (0x40800)
[Kernel-packages] [Bug 1891451] Re: Add TGL+ SAGV display support
** Tags added: apport-collected focal ** Description changed: TBD. + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu27.6 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: u 1855 F pulseaudio + CasperMD5CheckResult: skip + DistributionChannelDescriptor: + # This is the distribution channel descriptor for the OEM CDs + # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor + canonical-oem-somerville-focal-amd64-20200502-85+fossa-bulbasaur+X35 + DistroRelease: Ubuntu 20.04 + InstallationDate: Installed on 2020-08-07 (6 days ago) + InstallationMedia: Ubuntu 20.04 "Focal" - Build amd64 LIVE Binary 20200502-05:58 + IwConfig: + lono wireless extensions. + + enx00e04c6801fa no wireless extensions. + MachineType: Dell Inc. XPS 13 9310 + Package: linux (not installed) + ProcFB: 0 i915drmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.6.0-1020-oem root=UUID=00ec17d2-a1e3-4363-a67b-a7c380cc9189 ro drm.debug=0x1ff log_buf_len=32M + ProcVersionSignature: Ubuntu 5.6.0-1020.20-oem 5.6.19 + PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. + RelatedPackageVersions: + linux-restricted-modules-5.6.0-1020-oem N/A + linux-backports-modules-5.6.0-1020-oem N/A + linux-firmware 1.187.2 + RfKill: + + Tags: focal + Uname: Linux 5.6.0-1020-oem x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: N/A + _MarkForUpload: True + dmi.bios.date: 07/30/2020 + dmi.bios.vendor: Dell Inc. + dmi.bios.version: 0.2.9 + dmi.board.vendor: Dell Inc. + dmi.chassis.asset.tag: 202007-28063 + dmi.chassis.type: 10 + dmi.chassis.vendor: Dell Inc. + dmi.modalias: dmi:bvnDellInc.:bvr0.2.9:bd07/30/2020:svnDellInc.:pnXPS139310:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct10:cvr: + dmi.product.family: XPS + dmi.product.name: XPS 13 9310 + dmi.product.sku: 0991 + dmi.sys.vendor: Dell Inc. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1891451 Title: Add TGL+ SAGV display support Status in HWE Next: New Status in linux package in Ubuntu: Incomplete Status in linux-oem-5.6 package in Ubuntu: Invalid Status in linux source package in Focal: Invalid Status in linux-oem-5.6 source package in Focal: In Progress Status in linux source package in Groovy: Incomplete Status in linux-oem-5.6 source package in Groovy: Invalid Bug description: TBD. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: u 1855 F pulseaudio CasperMD5CheckResult: skip DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-focal-amd64-20200502-85+fossa-bulbasaur+X35 DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-08-07 (6 days ago) InstallationMedia: Ubuntu 20.04 "Focal" - Build amd64 LIVE Binary 20200502-05:58 IwConfig: lono wireless extensions. enx00e04c6801fa no wireless extensions. MachineType: Dell Inc. XPS 13 9310 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.6.0-1020-oem root=UUID=00ec17d2-a1e3-4363-a67b-a7c380cc9189 ro drm.debug=0x1ff log_buf_len=32M ProcVersionSignature: Ubuntu 5.6.0-1020.20-oem 5.6.19 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.6.0-1020-oem N/A linux-backports-modules-5.6.0-1020-oem N/A linux-firmware 1.187.2 RfKill: Tags: focal Uname: Linux 5.6.0-1020-oem x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 07/30/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 0.2.9 dmi.board.vendor: Dell Inc. dmi.chassis.asset.tag: 202007-28063 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr0.2.9:bd07/30/2020:svnDellInc.:pnXPS139310:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct10:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9310 dmi.product.sku: 0991 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1891451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891461] Re: Add proper USB audio support for Lenovo ThinkStation P620
Repository can be accessed via: git://git.launchpad.net/~ubuntu-audio-dev/pulseaudio git+ssh://git.launchpad.net/~ubuntu-audio-dev/pulseaudio https://git.launchpad.net/~ubuntu-audio-dev/pulseaudio -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1891461 Title: Add proper USB audio support for Lenovo ThinkStation P620 Status in alsa-lib package in Ubuntu: New Status in alsa-ucm-conf package in Ubuntu: New Status in pulseaudio package in Ubuntu: In Progress Status in alsa-lib source package in Focal: New Status in alsa-ucm-conf source package in Focal: New Status in pulseaudio source package in Focal: In Progress Status in alsa-lib source package in Groovy: New Status in alsa-ucm-conf source package in Groovy: New Status in pulseaudio source package in Groovy: In Progress Bug description: [Impact] Lenovo ThinkStation P620 uses TRX4 board, which doesn't have PCI audio in its chipset. Instead, it's equipped with two USB audio devices, "Main", which is for internal speaker and front headset, and "Rear", which is for rear panel I/Os. However, both USB audio don't really work out of the box. Issues and fixes will be described together below. [Fix for alsa-lib] 1) Both USB audio devices don't have S/PDIF port, so we need to disable them: https://git.alsa-project.org/?p=alsa-lib.git;a=commit;h=464c2f8b61855cb22d61c4b232f74d6767fac5fb [Fix for alsa-ucm-conf] 2) PulseAudio doesn't assign the correct stream for "Main" device, audio output stays at "Speaker" after "Headset" is selected. So we need UCM to let PulseAudio understand correct stream assignment. In addition to that, in order to not let headset port availability invalidate speaker profile, we need two UCM profiles to separate "Speaker" and "Headset" logically: https://github.com/alsa-project/alsa-ucm-conf/pull/42 [Fix for PulseAudio] 3) USB audio devices, UAC v2 and v3, support jack detection (insertion control). However, PulseAudio doesn't monitor USB jack mixer controls, so jack detection doesn't work at userspace level. We need to let PulseAudio be aware those jacks: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/e153fb870618b1dcf65f6fce1667ea76acc5a28b 4) When a headset gets plugged, PulseAudio switches the profile from "Speaker" to "Headset" automatically. However, when headset gets unplugged, PulseAudio switch the profile from "Headset" to "HDMI", skipping the "Speaker" profile. We need to fix priorities for profiles that are created from UCM to avoid the problem: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/dd70c3c5890ce27b9ba4bd041dea4a01c3e1fc0f [Test] Under g-c-c's Sound tab, "Speaker", "Headphone", "S/PDIF", etc. profiles are all selectable. Sound comes out from speaker even if "Headphone" is chosen. Microphone is already selected though there's no microphone plugged. With the above fix all applied, open Gnome Control Center -> Sound tab. Sink "Speaker" is selected. Only "Speaker" and "HDMI" are in the drop down menu. Plug a headset to front port, "Headphone" and "Microphone" appears and automatically becomes default. Unplug the headset, sink switches back to "Speaker", and source switches to none. Plug line-in, line-out and microphone to the rear panel, jack detection works for all three ports, and they all work correctly. Unplug rear line-in, line-out or microphone makes the option in dropdown menu disappears. On other systems, nothing changed. [Regression Potential] For fix 1) and 2), The UCM in alsa-lib and alsa-ucm-conf strictly match kernel provided profile name, so no other device will be affected. For fix 3), if there are UAC v2/v3 devices claim to support jack detection but don't really support it, this will make the PulseAudio consider its availability to "no". AFAIK, the USB audios that have jack ports are mostly docking stations, which already have their own UCM profiles or PulseAudio profile-sets, so they are unaffected by this change. If we ever see this kind of regression, the proper fix is to disable jack detection from kernel side. For fix 4), if user depends on the old behavior (i.e. switch to another card while other profiles are still available), this will bring a behavioral change. However, all available profiles will still be available after the fix, so users can still be chose the preferred profile from the g-c-c dropdown menu. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1891461/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891461] Re: Add proper USB audio support for Lenovo ThinkStation P620
Please also remember to commit to git early. You should have full access... https://git.launchpad.net/~ubuntu-audio-dev/pulseaudio/log/?h=ubuntu- focal ** Tags added: focal groovy ** Changed in: pulseaudio (Ubuntu Focal) Importance: Undecided => Medium ** Changed in: pulseaudio (Ubuntu Groovy) Importance: Undecided => Medium ** Changed in: alsa-lib (Ubuntu Groovy) Status: Incomplete => New ** Changed in: alsa-ucm-conf (Ubuntu Groovy) Status: Incomplete => New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1891461 Title: Add proper USB audio support for Lenovo ThinkStation P620 Status in alsa-lib package in Ubuntu: New Status in alsa-ucm-conf package in Ubuntu: New Status in pulseaudio package in Ubuntu: In Progress Status in alsa-lib source package in Focal: New Status in alsa-ucm-conf source package in Focal: New Status in pulseaudio source package in Focal: In Progress Status in alsa-lib source package in Groovy: New Status in alsa-ucm-conf source package in Groovy: New Status in pulseaudio source package in Groovy: In Progress Bug description: [Impact] Lenovo ThinkStation P620 uses TRX4 board, which doesn't have PCI audio in its chipset. Instead, it's equipped with two USB audio devices, "Main", which is for internal speaker and front headset, and "Rear", which is for rear panel I/Os. However, both USB audio don't really work out of the box. Issues and fixes will be described together below. [Fix for alsa-lib] 1) Both USB audio devices don't have S/PDIF port, so we need to disable them: https://git.alsa-project.org/?p=alsa-lib.git;a=commit;h=464c2f8b61855cb22d61c4b232f74d6767fac5fb [Fix for alsa-ucm-conf] 2) PulseAudio doesn't assign the correct stream for "Main" device, audio output stays at "Speaker" after "Headset" is selected. So we need UCM to let PulseAudio understand correct stream assignment. In addition to that, in order to not let headset port availability invalidate speaker profile, we need two UCM profiles to separate "Speaker" and "Headset" logically: https://github.com/alsa-project/alsa-ucm-conf/pull/42 [Fix for PulseAudio] 3) USB audio devices, UAC v2 and v3, support jack detection (insertion control). However, PulseAudio doesn't monitor USB jack mixer controls, so jack detection doesn't work at userspace level. We need to let PulseAudio be aware those jacks: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/e153fb870618b1dcf65f6fce1667ea76acc5a28b 4) When a headset gets plugged, PulseAudio switches the profile from "Speaker" to "Headset" automatically. However, when headset gets unplugged, PulseAudio switch the profile from "Headset" to "HDMI", skipping the "Speaker" profile. We need to fix priorities for profiles that are created from UCM to avoid the problem: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/dd70c3c5890ce27b9ba4bd041dea4a01c3e1fc0f [Test] Under g-c-c's Sound tab, "Speaker", "Headphone", "S/PDIF", etc. profiles are all selectable. Sound comes out from speaker even if "Headphone" is chosen. Microphone is already selected though there's no microphone plugged. With the above fix all applied, open Gnome Control Center -> Sound tab. Sink "Speaker" is selected. Only "Speaker" and "HDMI" are in the drop down menu. Plug a headset to front port, "Headphone" and "Microphone" appears and automatically becomes default. Unplug the headset, sink switches back to "Speaker", and source switches to none. Plug line-in, line-out and microphone to the rear panel, jack detection works for all three ports, and they all work correctly. Unplug rear line-in, line-out or microphone makes the option in dropdown menu disappears. On other systems, nothing changed. [Regression Potential] For fix 1) and 2), The UCM in alsa-lib and alsa-ucm-conf strictly match kernel provided profile name, so no other device will be affected. For fix 3), if there are UAC v2/v3 devices claim to support jack detection but don't really support it, this will make the PulseAudio consider its availability to "no". AFAIK, the USB audios that have jack ports are mostly docking stations, which already have their own UCM profiles or PulseAudio profile-sets, so they are unaffected by this change. If we ever see this kind of regression, the proper fix is to disable jack detection from kernel side. For fix 4), if user depends on the old behavior (i.e. switch to another card while other profiles are still available), this will bring a behavioral change. However, all available profiles will still be available after the fix, so users can still be chose the preferred profile from the g-c-c dropdown menu. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1891461/+subscriptions -- Mailing list:
[Kernel-packages] [Bug 1891461] Re: Add proper USB audio support for Lenovo ThinkStation P620
Please remove pulseaudio_13.99.1-1ubuntu9.debdiff from comment #3 because that version already exists. And create a new version 13.99.1-1ubuntu10 rebased on: https://git.launchpad.net/~ubuntu-audio-dev/pulseaudio/log/ https://launchpad.net/ubuntu/+source/pulseaudio/1:13.99.1-1ubuntu9 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1891461 Title: Add proper USB audio support for Lenovo ThinkStation P620 Status in alsa-lib package in Ubuntu: Incomplete Status in alsa-ucm-conf package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: In Progress Status in alsa-lib source package in Focal: New Status in alsa-ucm-conf source package in Focal: New Status in pulseaudio source package in Focal: In Progress Status in alsa-lib source package in Groovy: Incomplete Status in alsa-ucm-conf source package in Groovy: Incomplete Status in pulseaudio source package in Groovy: In Progress Bug description: [Impact] Lenovo ThinkStation P620 uses TRX4 board, which doesn't have PCI audio in its chipset. Instead, it's equipped with two USB audio devices, "Main", which is for internal speaker and front headset, and "Rear", which is for rear panel I/Os. However, both USB audio don't really work out of the box. Issues and fixes will be described together below. [Fix for alsa-lib] 1) Both USB audio devices don't have S/PDIF port, so we need to disable them: https://git.alsa-project.org/?p=alsa-lib.git;a=commit;h=464c2f8b61855cb22d61c4b232f74d6767fac5fb [Fix for alsa-ucm-conf] 2) PulseAudio doesn't assign the correct stream for "Main" device, audio output stays at "Speaker" after "Headset" is selected. So we need UCM to let PulseAudio understand correct stream assignment. In addition to that, in order to not let headset port availability invalidate speaker profile, we need two UCM profiles to separate "Speaker" and "Headset" logically: https://github.com/alsa-project/alsa-ucm-conf/pull/42 [Fix for PulseAudio] 3) USB audio devices, UAC v2 and v3, support jack detection (insertion control). However, PulseAudio doesn't monitor USB jack mixer controls, so jack detection doesn't work at userspace level. We need to let PulseAudio be aware those jacks: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/e153fb870618b1dcf65f6fce1667ea76acc5a28b 4) When a headset gets plugged, PulseAudio switches the profile from "Speaker" to "Headset" automatically. However, when headset gets unplugged, PulseAudio switch the profile from "Headset" to "HDMI", skipping the "Speaker" profile. We need to fix priorities for profiles that are created from UCM to avoid the problem: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/dd70c3c5890ce27b9ba4bd041dea4a01c3e1fc0f [Test] Under g-c-c's Sound tab, "Speaker", "Headphone", "S/PDIF", etc. profiles are all selectable. Sound comes out from speaker even if "Headphone" is chosen. Microphone is already selected though there's no microphone plugged. With the above fix all applied, open Gnome Control Center -> Sound tab. Sink "Speaker" is selected. Only "Speaker" and "HDMI" are in the drop down menu. Plug a headset to front port, "Headphone" and "Microphone" appears and automatically becomes default. Unplug the headset, sink switches back to "Speaker", and source switches to none. Plug line-in, line-out and microphone to the rear panel, jack detection works for all three ports, and they all work correctly. Unplug rear line-in, line-out or microphone makes the option in dropdown menu disappears. On other systems, nothing changed. [Regression Potential] For fix 1) and 2), The UCM in alsa-lib and alsa-ucm-conf strictly match kernel provided profile name, so no other device will be affected. For fix 3), if there are UAC v2/v3 devices claim to support jack detection but don't really support it, this will make the PulseAudio consider its availability to "no". AFAIK, the USB audios that have jack ports are mostly docking stations, which already have their own UCM profiles or PulseAudio profile-sets, so they are unaffected by this change. If we ever see this kind of regression, the proper fix is to disable jack detection from kernel side. For fix 4), if user depends on the old behavior (i.e. switch to another card while other profiles are still available), this will bring a behavioral change. However, all available profiles will still be available after the fix, so users can still be chose the preferred profile from the g-c-c dropdown menu. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1891461/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1891461] Re: Add proper USB audio support for Lenovo ThinkStation P620
** Changed in: pulseaudio (Ubuntu Focal) Status: New => In Progress ** Changed in: pulseaudio (Ubuntu Groovy) Status: Incomplete => In Progress ** Changed in: pulseaudio (Ubuntu Focal) Assignee: (unassigned) => Kai-Heng Feng (kaihengfeng) ** Changed in: pulseaudio (Ubuntu Groovy) Assignee: (unassigned) => Kai-Heng Feng (kaihengfeng) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1891461 Title: Add proper USB audio support for Lenovo ThinkStation P620 Status in alsa-lib package in Ubuntu: Incomplete Status in alsa-ucm-conf package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: In Progress Status in alsa-lib source package in Focal: New Status in alsa-ucm-conf source package in Focal: New Status in pulseaudio source package in Focal: In Progress Status in alsa-lib source package in Groovy: Incomplete Status in alsa-ucm-conf source package in Groovy: Incomplete Status in pulseaudio source package in Groovy: In Progress Bug description: [Impact] Lenovo ThinkStation P620 uses TRX4 board, which doesn't have PCI audio in its chipset. Instead, it's equipped with two USB audio devices, "Main", which is for internal speaker and front headset, and "Rear", which is for rear panel I/Os. However, both USB audio don't really work out of the box. Issues and fixes will be described together below. [Fix for alsa-lib] 1) Both USB audio devices don't have S/PDIF port, so we need to disable them: https://git.alsa-project.org/?p=alsa-lib.git;a=commit;h=464c2f8b61855cb22d61c4b232f74d6767fac5fb [Fix for alsa-ucm-conf] 2) PulseAudio doesn't assign the correct stream for "Main" device, audio output stays at "Speaker" after "Headset" is selected. So we need UCM to let PulseAudio understand correct stream assignment. In addition to that, in order to not let headset port availability invalidate speaker profile, we need two UCM profiles to separate "Speaker" and "Headset" logically: https://github.com/alsa-project/alsa-ucm-conf/pull/42 [Fix for PulseAudio] 3) USB audio devices, UAC v2 and v3, support jack detection (insertion control). However, PulseAudio doesn't monitor USB jack mixer controls, so jack detection doesn't work at userspace level. We need to let PulseAudio be aware those jacks: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/e153fb870618b1dcf65f6fce1667ea76acc5a28b 4) When a headset gets plugged, PulseAudio switches the profile from "Speaker" to "Headset" automatically. However, when headset gets unplugged, PulseAudio switch the profile from "Headset" to "HDMI", skipping the "Speaker" profile. We need to fix priorities for profiles that are created from UCM to avoid the problem: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/dd70c3c5890ce27b9ba4bd041dea4a01c3e1fc0f [Test] Under g-c-c's Sound tab, "Speaker", "Headphone", "S/PDIF", etc. profiles are all selectable. Sound comes out from speaker even if "Headphone" is chosen. Microphone is already selected though there's no microphone plugged. With the above fix all applied, open Gnome Control Center -> Sound tab. Sink "Speaker" is selected. Only "Speaker" and "HDMI" are in the drop down menu. Plug a headset to front port, "Headphone" and "Microphone" appears and automatically becomes default. Unplug the headset, sink switches back to "Speaker", and source switches to none. Plug line-in, line-out and microphone to the rear panel, jack detection works for all three ports, and they all work correctly. Unplug rear line-in, line-out or microphone makes the option in dropdown menu disappears. On other systems, nothing changed. [Regression Potential] For fix 1) and 2), The UCM in alsa-lib and alsa-ucm-conf strictly match kernel provided profile name, so no other device will be affected. For fix 3), if there are UAC v2/v3 devices claim to support jack detection but don't really support it, this will make the PulseAudio consider its availability to "no". AFAIK, the USB audios that have jack ports are mostly docking stations, which already have their own UCM profiles or PulseAudio profile-sets, so they are unaffected by this change. If we ever see this kind of regression, the proper fix is to disable jack detection from kernel side. For fix 4), if user depends on the old behavior (i.e. switch to another card while other profiles are still available), this will bring a behavioral change. However, all available profiles will still be available after the fix, so users can still be chose the preferred profile from the g-c-c dropdown menu. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1891461/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net
[Kernel-packages] [Bug 1890863] Re: [amdgpu] Display does not come on after suspend
Can you please try again on kernel 5.8 and gather another log? The problem with the log in comment #6 is that it ends too early -- when the system suspends. And doesn't show anything about trying to resume from suspend. This is a common issue with these kinds of bugs. To make it more likely that a complete log is written please hit these keys after resuming from suspend (when the display isn't coming on): Alt + SysRq + S and then reboot. Or you can do it all in one: (Holding Alt+SysRq) R,E,I,S,U,B https://en.wikipedia.org/wiki/Magic_SysRq_key -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1890863 Title: [amdgpu] Display does not come on after suspend Status in linux package in Ubuntu: Incomplete Bug description: After coming out of suspend the display is not receiving any data and stays in power saving mode. Only power cycling the system brings it back. Unsure whether this is related to amdgpu or something else. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-42.46-generic 5.4.44 Uname: Linux 5.4.0-42-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.6 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sat Aug 8 12:51:28 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] [1002:731f] (rev c4) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] [1458:2314] InstallationDate: Installed on 2020-01-08 (212 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Alpha amd64 (20200106) MachineType: System manufacturer System Product Name ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-42-generic root=UUID=d1ce6274-5a98-4eab-93b4-393469cec0d9 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/05/2020 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2603 dmi.board.asset.tag: Default string dmi.board.name: TUF GAMING X570-PLUS (WI-FI) dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2603:bd08/05/2020:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnTUFGAMINGX570-PLUS(WI-FI):rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.101-2 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.8-0ubuntu1~20.04.1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1890863/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1856608] Re: [Regression] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
@jeremyn54 Thanks for testing the test kernel. I suppose this means that "usb: handle warm-reset port requests on hub resume" is still causing us trouble. @everyone Can you please unplug all USB devices from your computer, and connect them one by one until you find the device which causes the "usb usb2-port2: Cannot enable. Maybe the USB cable is bad?" in dmesg? When you find the device which is causing problems, can you write back with 1) What it is: Manufacturer, Make, Model etc. 2) The output the kernel has for it in demsg when you plug it in. E.g. The device which started this whole thing: https://www.spinics.net/lists/linux-usb/msg175832.html Sandisk Ultra T C. [1.868336] usb 3-3: New USB device found, idVendor=0781, idProduct=5596, bcdDevice= 1.00 [1.868337] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [1.868338] usb 3-3: Product: Ultra T C [1.868339] usb 3-3: Manufacturer: SanDisk [1.868340] usb 3-3: SerialNumber: 4C530001090830111403 The above device is an example of a device that only works when "usb: handle warm-reset port requests on hub resume" is applied, and is the reason for the commit to exist in the first place. We want to collect a list of devices that now fail to work when "usb: handle warm-reset port requests on hub resume" has been applied. We will take the list of devices that fail, and write to the USB maintainer on linux-usb mailing list and see what we can do to fix things. As a final note, if you can, please change out any USB cables for different ones, since they may be broken or not spec complaint, and testing with different cables can rule out hardware failures. Thanks, Matthew -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1856608 Title: [Regression] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? Status in linux package in Ubuntu: Incomplete Status in linux source package in Bionic: Fix Released Status in linux source package in Disco: Fix Released Status in linux source package in Eoan: Fix Released Status in linux source package in Focal: Incomplete Bug description: This appears to be a regression between 4.15.0-70.79 and 4.15.0-72.81. This bug was fixed by simply reverting the offending change. Bug 1859873 tracks root causing the issue and reapplying the change w/ any necessary fixes. [Impact] USB port unusable and boot time takes ~5 minutes longer to complete. Kernel emits messages like: usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [Test Case] dmesg | grep "Cannot enable" [Fix] [Regression Risk] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1856608/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891405] Re: Qualcomm Atheros QCA6174 [168c:003e] Subsystem [1a56:143a] Regular wifi crashes on XPS 13 9380
I have installed the new firmware from the PPA; I will keep you informed about how it works. Thanks for your help! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1891405 Title: Qualcomm Atheros QCA6174 [168c:003e] Subsystem [1a56:143a] Regular wifi crashes on XPS 13 9380 Status in linux package in Ubuntu: Incomplete Bug description: Within the past two weeks I've been suffering from a bunch more crashes of my wifi on my XPS 13 9380. The wifi will stay up for awhile after reboot, but will eventually throw the error below and require a reboot. [26425.814726] ath10k_pci :02:00.0: firmware crashed! (guid 63f4915b-939b-493a-8e39-2c19c0a15d9a) [26425.814732] ath10k_pci :02:00.0: qca6174 hw3.2 target 0x0503 chip_id 0x00340aff sub 1a56:143a [26425.814734] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [26425.815358] ath10k_pci :02:00.0: firmware ver WLAN.RM.4.4.1-00140-QCARMSWPZ-1 api 6 features wowlan,ignore-otp,mfp crc32 29eb8ca1 [26425.815910] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 4ac0889b [26425.815913] ath10k_pci :02:00.0: htt-ver 3.60 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [26425.826394] ath10k_pci :02:00.0: failed to get memcpy hi address for firmware address 4: -16 [26425.826397] ath10k_pci :02:00.0: failed to read firmware dump area: -16 [26425.826400] ath10k_pci :02:00.0: Copy Engine register dump: [26425.826410] ath10k_pci :02:00.0: [00]: 0x00034400 11 11 3 3 [26425.826419] ath10k_pci :02:00.0: [01]: 0x00034800 20 19 416 417 [26425.826427] ath10k_pci :02:00.0: [02]: 0x00034c00 1 0 127 0 [26425.826435] ath10k_pci :02:00.0: [03]: 0x00035000 5 5 7 5 [26425.826443] ath10k_pci :02:00.0: [04]: 0x00035400 7133 7107 34 226 [26425.826452] ath10k_pci :02:00.0: [05]: 0x00035800 0 0 64 0 [26425.826460] ath10k_pci :02:00.0: [06]: 0x00035c00 0 30 22 20 [26425.826468] ath10k_pci :02:00.0: [07]: 0x00036000 1 0 1 0 [26425.860520] ath10k_pci :02:00.0: failed to read hi_board_data address: -28 [26425.940417] ieee80211 phy0: Hardware restart was requested [26426.161669] ath10k_pci :02:00.0: unsupported HTC service id: 1536 [26426.285743] ath10k_pci :02:00.0: device successfully recovered lspci 00:00.0 Host bridge: Intel Corporation Coffee Lake HOST and DRAM Controller (rev 0b) 00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (Whiskey Lake) 00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 0b) 00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model 00:12.0 Signal processing controller: Intel Corporation Cannon Point-LP Thermal Controller (rev 30) 00:14.0 USB controller: Intel Corporation Cannon Point-LP USB 3.1 xHCI Controller (rev 30) 00:14.2 RAM memory: Intel Corporation Cannon Point-LP Shared SRAM (rev 30) 00:15.0 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP Serial IO I2C Controller #0 (rev 30) 00:15.1 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP Serial IO I2C Controller #1 (rev 30) 00:16.0 Communication controller: Intel Corporation Cannon Point-LP MEI Controller #1 (rev 30) 00:1c.0 PCI bridge: Intel Corporation Cannon Point-LP PCI Express Root Port #5 (rev f0) 00:1c.6 PCI bridge: Intel Corporation Cannon Point-LP PCI Express Root Port #7 (rev f0) 00:1d.0 PCI bridge: Intel Corporation Cannon Point-LP PCI Express Root Port #9 (rev f0) 00:1d.4 PCI bridge: Intel Corporation Cannon Point-LP PCI Express Root Port #13 (rev f0) 00:1f.0 ISA bridge: Intel Corporation Cannon Point-LP LPC Controller (rev 30) 00:1f.3 Audio device: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 30) 00:1f.4 SMBus: Intel Corporation Cannon Point-LP SMBus Controller (rev 30) 00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP SPI Controller (rev 30) 01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01) 02:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32) 03:00.0 PCI bridge: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] (rev 02) 04:00.0 PCI bridge: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] (rev 02) 04:01.0 PCI bridge: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] (rev 02) 04:02.0 PCI bridge: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] (rev 02) 04:04.0 PCI bridge: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C
[Kernel-packages] [Bug 1886860] Re: cgroup refcount is bogus when cgroup_sk_alloc is disabled
This bug is awaiting verification that the kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed- bionic' to 'verification-done-bionic'. If the problem still exists, change the tag 'verification-needed-bionic' to 'verification-failed- bionic'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: verification-needed-bionic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1886860 Title: cgroup refcount is bogus when cgroup_sk_alloc is disabled Status in linux package in Ubuntu: Invalid Status in linux-oem-5.6 package in Ubuntu: New Status in linux source package in Bionic: Fix Committed Status in linux-oem-5.6 source package in Bionic: Invalid Status in linux source package in Eoan: Fix Committed Status in linux-oem-5.6 source package in Eoan: Invalid Status in linux source package in Focal: Fix Committed Status in linux-oem-5.6 source package in Focal: Fix Released Status in linux source package in Groovy: Invalid Status in linux-oem-5.6 source package in Groovy: New Bug description: [Impact] When net_prio and net_cls cgroups are used, cgroup refcount is bogus, as it's not incremented anymore, but decremented when sockets are closed. This might lead to crashes possibly because of use-after-free when packets are received as shown in LP #1886668. [Test case] Ran reproducer from comment #2. [Regression potential] We could break the use of cgroup bpf. The use of cgroup bpf looks to still be working from the reproducer. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1886860/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1889683] Re: Touchpad used to work fine but suddently not working
Reading the link on kernel bisection, I suppose it's far too technical for a plain user like me. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1889683 Title: Touchpad used to work fine but suddently not working Status in linux package in Ubuntu: Confirmed Bug description: I: Bus=0019 Vendor= Product=0001 Version= N: Name="Power Button" P: Phys=PNP0C0C/button/input0 S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 U: Uniq= H: Handlers=kbd event0 B: PROP=0 B: EV=3 B: KEY=10 0 I: Bus=0019 Vendor= Product=0005 Version= N: Name="Lid Switch" P: Phys=PNP0C0D/button/input0 S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 U: Uniq= H: Handlers=event1 B: PROP=0 B: EV=21 B: SW=1 I: Bus=0019 Vendor= Product=0003 Version= N: Name="Sleep Button" P: Phys=PNP0C0E/button/input0 S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 U: Uniq= H: Handlers=kbd event2 B: PROP=0 B: EV=3 B: KEY=4000 0 0 I: Bus=0019 Vendor= Product=0001 Version= N: Name="Power Button" P: Phys=LNXPWRBN/button/input0 S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 U: Uniq= H: Handlers=kbd event3 B: PROP=0 B: EV=3 B: KEY=10 0 I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 N: Name="AT Translated Set 2 keyboard" P: Phys=isa0060/serio0/input0 S: Sysfs=/devices/platform/i8042/serio0/input/input4 U: Uniq= H: Handlers=sysrq kbd event4 leds B: PROP=0 B: EV=120013 B: KEY=40200 3803078f800d001 fedfffef fffe B: MSC=10 B: LED=7 I: Bus=0011 Vendor=0002 Product=0001 Version=0063 N: Name="PS/2 Logitech Wheel Mouse" P: Phys=isa0060/serio4/input0 S: Sysfs=/devices/platform/i8042/serio4/input/input12 U: Uniq= H: Handlers=mouse0 event5 B: PROP=1 B: EV=7 B: KEY=7 0 0 0 0 B: REL=3 I: Bus=0019 Vendor=1043 Product= Version= N: Name="Asus Wireless Radio Control" P: Phys=asus-wireless/input0 S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input13 U: Uniq= H: Handlers=rfkill kbd event6 B: PROP=0 B: EV=3 B: KEY=80 0 0 0 I: Bus=0019 Vendor= Product=0006 Version= N: Name="Video Bus" P: Phys=LNXVIDEO/video/input0 S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input14 U: Uniq= H: Handlers=kbd event7 B: PROP=0 B: EV=3 B: KEY=3e000b 0 0 0 I: Bus= Vendor= Product= Version= N: Name="HDA ATI HDMI HDMI/DP,pcm=3" P: Phys=ALSA S: Sysfs=/devices/pci:00/:00:01.1/sound/card0/input15 U: Uniq= H: Handlers=event8 B: PROP=0 B: EV=21 B: SW=140 I: Bus= Vendor= Product= Version= N: Name="HD-Audio Generic Mic" P: Phys=ALSA S: Sysfs=/devices/pci:00/:00:09.2/sound/card1/input16 U: Uniq= H: Handlers=event9 B: PROP=0 B: EV=21 B: SW=10 I: Bus= Vendor= Product= Version= N: Name="HD-Audio Generic Headphone" P: Phys=ALSA S: Sysfs=/devices/pci:00/:00:09.2/sound/card1/input17 U: Uniq= H: Handlers=event10 B: PROP=0 B: EV=21 B: SW=4 I: Bus=0019 Vendor= Product=0006 Version= N: Name="Video Bus" P: Phys=LNXVIDEO/video/input0 S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input18 U: Uniq= H: Handlers=kbd event11 B: PROP=0 B: EV=3 B: KEY=3e000b 0 0 0 I: Bus=0019 Vendor= Product= Version= N: Name="Asus WMI hotkeys" P: Phys=asus-nb-wmi/input0 S: Sysfs=/devices/platform/asus-nb-wmi/input/input19 U: Uniq= H: Handlers=rfkill kbd event12 B: PROP=0 B: EV=100013 B: KEY=10008 0 0 0 0 81606f0090 8200027801701000 e 0 B: MSC=10 I: Bus=0003 Vendor=0bda Product=57de Version=0014 N: Name="USB2.0 VGA UVC WebCam: USB2.0 V" P: Phys=usb-:00:12.0-1.4/button S: Sysfs=/devices/pci:00/:00:12.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input20 U: Uniq= H: Handlers=kbd event13 B: PROP=0 B: EV=3 B: KEY=10 0 0 0 ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-image-4.15.0-112-generic 4.15.0-112.113 ProcVersionSignature: Ubuntu 4.15.0-112.113-generic 4.15.18 Uname: Linux 4.15.0-112-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.15 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: cw 1644 F pulseaudio /dev/snd/controlC0: cw 1644 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Fri Jul 31 02:22:01 2020 HibernationDevice: RESUME=UUID=f708405d-38d1-4aaa-a65b-61f60cb0eb7d InstallationDate: Installed on 2018-11-15 (623 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) MachineType: ASUSTeK COMPUTER INC. X555BP ProcFB: 0
[Kernel-packages] [Bug 1870971] Re: [amdgpu] (X)ubuntu 20.04 boots to black screen on Lenovo Ideapad L340-17API when in battery mode
Same here on Ubuntu Mate 20.04. We have 50 laptops Lenovo V155-15API Ryzen 3 3500u unable to start in battery mode. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1870971 Title: [amdgpu] (X)ubuntu 20.04 boots to black screen on Lenovo Ideapad L340-17API when in battery mode Status in linux package in Ubuntu: Confirmed Status in vlc package in Ubuntu: Invalid Bug description: Freshly installed Xubuntu 20.04 shows black screen instead of login screen upon boot on Lenovo Ideapad L340-17API. It is not possible to chvt to text terminal when boot is stuck on black screen. Booting with 'nomodeset' kernel option works properly but is not an option (e.g. screen brightness is not adjustable in this case). Another workaround is to ssh to laptop and run systemctl restart display-manager.service. After 5-10 seconds upon executing this command perfectly working login screen appears. Check dmesg. There is apparently related messages from amdgpu driver: ... апр 05 20:46:45 kernel: [drm:amdgpu_dm_set_crtc_irq_state [amdgpu]] *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 апр 05 20:46:45 kernel: [drm:amdgpu_dm_set_crtc_irq_state [amdgpu]] *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 апр 05 20:46:45 kernel: [drm:amdgpu_dm_set_crtc_irq_state [amdgpu]] *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 апр 05 20:46:45 kernel: [drm:amdgpu_dm_set_crtc_irq_state [amdgpu]] *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 апр 05 20:46:45 kernel: [drm:amdgpu_dm_set_pflip_irq_state [amdgpu]] *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 апр 05 20:46:45 kernel: [drm:amdgpu_dm_set_pflip_irq_state [amdgpu]] *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 апр 05 20:46:45 kernel: [drm:amdgpu_dm_set_pflip_irq_state [amdgpu]] *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 апр 05 20:46:45 kernel: [drm:amdgpu_dm_set_pflip_irq_state [amdgpu]] *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 апр 05 20:46:45 kernel: [drm:amdgpu_dm_set_vupdate_irq_state [amdgpu]] *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 апр 05 20:46:45 kernel: [drm:amdgpu_dm_set_vupdate_irq_state [amdgpu]] *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 апр 05 20:46:45 kernel: [drm:amdgpu_dm_set_vupdate_irq_state [amdgpu]] *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 апр 05 20:46:45 kernel: [drm:amdgpu_dm_set_vupdate_irq_state [amdgpu]] *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 апр 05 20:46:45 kernel: [drm] recover vram bo from shadow start апр 05 20:46:45 kernel: [drm] recover vram bo from shadow done апр 05 20:46:45 kernel: [drm] Skip scheduling IBs! апр 05 20:46:45 kernel: [ cut here ] апр 05 20:46:45 kernel: WARNING: CPU: 3 PID: 793 at include/linux/dma-fence.h:533 drm_sched_resubmit_jobs+0x152/0x160 [gpu_sched] апр 05 20:46:45 kernel: Modules linked in: cmac algif_hash algif_skcipher af_alg bnep zram nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_nhlt snd_hda_codec > апр 05 20:46:45 kernel: CPU: 3 PID: 793 Comm: kworker/3:4 Tainted: G OE 5.4.0-21-generic #25-Ubuntu апр 05 20:46:45 kernel: Hardware name: LENOVO 81LY/LNVNB161216, BIOS ARCN32WW 07/11/2019 апр 05 20:46:45 kernel: Workqueue: events drm_sched_job_timedout [gpu_sched] апр 05 20:46:45 kernel: RIP: 0010:drm_sched_resubmit_jobs+0x152/0x160 [gpu_sched] апр 05 20:46:45 kernel: Code: 41 5c 41 5d 41 5e 41 5f 5d c3 49 8b 46 10 31 c9 48 c7 80 80 00 00 00 00 00 00 00 49 8b 7f 70 31 c0 83 e7 01 74 04 0f 0b eb bf <0f> 0b eb c7 0f 0b eb 8b 66 0f 1f 44 00 00 0f 1f 44 00 00 83 7f 4c апр 05 20:46:45 kernel: RSP: 0018:a4dc806d7d28 EFLAGS: 00010246 апр 05 20:46:45 kernel: RAX: RBX: 0001 RCX: апр 05 20:46:45 kernel: RDX: 8cc9a6fc9180 RSI: 8cc9ac4609f8 RDI: апр 05 20:46:45 kernel: RBP: a4dc806d7d60 R08: 047a R09: 0004 апр 05 20:46:45 kernel: R10: R11: 0001 R12: 8cc9ac463c00 апр 05 20:46:45 kernel: R13: 8cc9a63c7980 R14: 8cc9ac460800 R15: 8cc9a6fc9140 апр 05 20:46:45 kernel: FS: () GS:8cc9b88c() knlGS: апр 05 20:46:45 kernel: CS: 0010 DS: ES: CR0: 80050033 апр 05 20:46:45 kernel: CR2: 7f275ff6c000 CR3: 0001af148000 CR4: 003406e0 апр 05 20:46:45 kernel: Call Trace: апр 05 20:46:45 kernel: amdgpu_device_gpu_recover+0x6cd/0x95a [amdgpu] апр 05 20:46:45 kernel: amdgpu_job_timedout+0x103/0x130 [amdgpu] апр 05 20:46:45 kernel: drm_sched_job_timedout+0x44/0x90 [gpu_sched] апр 05 20:46:45
[Kernel-packages] [Bug 1867916] Re: Regression in kernel 4.15.0-91 causes kernel panic with Bcache
This bug was fixed in the package linux - 4.4.0-187.217 --- linux (4.4.0-187.217) xenial; urgency=medium * xenial/linux: 4.4.0-187.217 -proposed tracker (LP: #1888274) * Regression in kernel 4.15.0-91 causes kernel panic with Bcache (LP: #1867916) - bcache: check and adjust logical block size for backing devices * Xenial update: v4.4.230 upstream stable release (LP: #1887011) - btrfs: cow_file_range() num_bytes and disk_num_bytes are same - btrfs: fix data block group relocation failure due to concurrent scrub - mm: fix swap cache node allocation mask - EDAC/amd64: Read back the scrub rate PCI register on F15h - mm/slub: fix stack overruns with SLUB_STATS - usb: usbtest: fix missing kfree(dev->buf) in usbtest_disconnect - kgdb: Avoid suspicious RCU usage warning - crypto: af_alg - fix use-after-free in af_alg_accept() due to bh_lock_sock() - sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds - hwmon: (max6697) Make sure the OVERT mask is set correctly - hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add() - virtio-blk: free vblk-vqs in error path of virtblk_probe() - i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665 - Revert "ALSA: usb-audio: Improve frames size computation" - SMB3: Honor 'seal' flag for multiuser mounts - SMB3: Honor persistent/resilient handle flags for multiuser mounts - cifs: Fix the target file was deleted when rename failed. - MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen - netfilter: nf_conntrack_h323: lost .data_len definition for Q.931/ipv6 - Linux 4.4.230 * Xenial update: v4.4.229 upstream stable release (LP: #1885932) - s390: fix syscall_get_error for compat processes - clk: sunxi: Fix incorrect usage of round_down() - i2c: piix4: Detect secondary SMBus controller on AMD AM4 chipsets - clk: qcom: msm8916: Fix the address location of pll->config_reg - ALSA: isa/wavefront: prevent out of bounds write in ioctl - scsi: qla2xxx: Fix issue with adapter's stopping state - i2c: pxa: clear all master action bits in i2c_pxa_stop_message() - usblp: poison URBs upon disconnect - ps3disk: use the default segment boundary - vfio/pci: fix memory leaks in alloc_perm_bits() - mfd: wm8994: Fix driver operation if loaded as modules - scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event - nfsd: Fix svc_xprt refcnt leak when setup callback client failed - powerpc/crashkernel: Take "mem=" option into account - yam: fix possible memory leak in yam_init_driver - mksysmap: Fix the mismatch of '.L' symbols in System.map - scsi: sr: Fix sr_probe() missing deallocate of device minor - scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM - ALSA: usb-audio: Improve frames size computation - s390/qdio: put thinint indicator after early error - tty: hvc: Fix data abort due to race in hvc_open - staging: sm750fb: add missing case while setting FB_VISUAL - i2c: pxa: fix i2c_pxa_scream_blue_murder() debug output - serial: amba-pl011: Make sure we initialize the port.lock spinlock - drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish - PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges - power: supply: smb347-charger: IRQSTAT_D is volatile - scsi: mpt3sas: Fix double free warnings - dlm: remove BUG() before panic() - clk: ti: composite: fix memory leak - tty: n_gsm: Fix SOF skipping - tty: n_gsm: Fix waking up upper tty layer when room available - powerpc/pseries/ras: Fix FWNMI_VALID off by one - powerpc/ps3: Fix kexec shutdown hang - vfio-pci: Mask cap zero - usb/ohci-platform: Fix a warning when hibernating - USB: host: ehci-mxc: Add error handling in ehci_mxc_drv_probe() - tty: n_gsm: Fix bogus i++ in gsm_data_kick - clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1 - watchdog: da9062: No need to ping manually before setting timeout - usb: dwc2: gadget: move gadget resume after the core is in L0 state - USB: gadget: udc: s3c2410_udc: Remove pointless NULL check in s3c2410_udc_nuke - usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check - usb: gadget: fix potential double-free in m66592_probe. - net: sunrpc: Fix off-by-one issues in 'rpc_ntop6' - ASoC: fsl_asrc_dma: Fix dma_chan leak when config DMA channel failed - openrisc: Fix issue with argument clobbering for clone/fork - gfs2: Allow lock_nolock mount to specify jid=X - scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj - lib/zlib: remove outdated and incorrect pre-increment optimization - include/linux/bitops.h: avoid clang shift-count-overflow warnings - elfnote: mark all .note sections SHF_ALLOC -
[Kernel-packages] [Bug 1887011] Re: Xenial update: v4.4.230 upstream stable release
This bug was fixed in the package linux - 4.4.0-187.217 --- linux (4.4.0-187.217) xenial; urgency=medium * xenial/linux: 4.4.0-187.217 -proposed tracker (LP: #1888274) * Regression in kernel 4.15.0-91 causes kernel panic with Bcache (LP: #1867916) - bcache: check and adjust logical block size for backing devices * Xenial update: v4.4.230 upstream stable release (LP: #1887011) - btrfs: cow_file_range() num_bytes and disk_num_bytes are same - btrfs: fix data block group relocation failure due to concurrent scrub - mm: fix swap cache node allocation mask - EDAC/amd64: Read back the scrub rate PCI register on F15h - mm/slub: fix stack overruns with SLUB_STATS - usb: usbtest: fix missing kfree(dev->buf) in usbtest_disconnect - kgdb: Avoid suspicious RCU usage warning - crypto: af_alg - fix use-after-free in af_alg_accept() due to bh_lock_sock() - sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds - hwmon: (max6697) Make sure the OVERT mask is set correctly - hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add() - virtio-blk: free vblk-vqs in error path of virtblk_probe() - i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665 - Revert "ALSA: usb-audio: Improve frames size computation" - SMB3: Honor 'seal' flag for multiuser mounts - SMB3: Honor persistent/resilient handle flags for multiuser mounts - cifs: Fix the target file was deleted when rename failed. - MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen - netfilter: nf_conntrack_h323: lost .data_len definition for Q.931/ipv6 - Linux 4.4.230 * Xenial update: v4.4.229 upstream stable release (LP: #1885932) - s390: fix syscall_get_error for compat processes - clk: sunxi: Fix incorrect usage of round_down() - i2c: piix4: Detect secondary SMBus controller on AMD AM4 chipsets - clk: qcom: msm8916: Fix the address location of pll->config_reg - ALSA: isa/wavefront: prevent out of bounds write in ioctl - scsi: qla2xxx: Fix issue with adapter's stopping state - i2c: pxa: clear all master action bits in i2c_pxa_stop_message() - usblp: poison URBs upon disconnect - ps3disk: use the default segment boundary - vfio/pci: fix memory leaks in alloc_perm_bits() - mfd: wm8994: Fix driver operation if loaded as modules - scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event - nfsd: Fix svc_xprt refcnt leak when setup callback client failed - powerpc/crashkernel: Take "mem=" option into account - yam: fix possible memory leak in yam_init_driver - mksysmap: Fix the mismatch of '.L' symbols in System.map - scsi: sr: Fix sr_probe() missing deallocate of device minor - scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM - ALSA: usb-audio: Improve frames size computation - s390/qdio: put thinint indicator after early error - tty: hvc: Fix data abort due to race in hvc_open - staging: sm750fb: add missing case while setting FB_VISUAL - i2c: pxa: fix i2c_pxa_scream_blue_murder() debug output - serial: amba-pl011: Make sure we initialize the port.lock spinlock - drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish - PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges - power: supply: smb347-charger: IRQSTAT_D is volatile - scsi: mpt3sas: Fix double free warnings - dlm: remove BUG() before panic() - clk: ti: composite: fix memory leak - tty: n_gsm: Fix SOF skipping - tty: n_gsm: Fix waking up upper tty layer when room available - powerpc/pseries/ras: Fix FWNMI_VALID off by one - powerpc/ps3: Fix kexec shutdown hang - vfio-pci: Mask cap zero - usb/ohci-platform: Fix a warning when hibernating - USB: host: ehci-mxc: Add error handling in ehci_mxc_drv_probe() - tty: n_gsm: Fix bogus i++ in gsm_data_kick - clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1 - watchdog: da9062: No need to ping manually before setting timeout - usb: dwc2: gadget: move gadget resume after the core is in L0 state - USB: gadget: udc: s3c2410_udc: Remove pointless NULL check in s3c2410_udc_nuke - usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check - usb: gadget: fix potential double-free in m66592_probe. - net: sunrpc: Fix off-by-one issues in 'rpc_ntop6' - ASoC: fsl_asrc_dma: Fix dma_chan leak when config DMA channel failed - openrisc: Fix issue with argument clobbering for clone/fork - gfs2: Allow lock_nolock mount to specify jid=X - scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj - lib/zlib: remove outdated and incorrect pre-increment optimization - include/linux/bitops.h: avoid clang shift-count-overflow warnings - elfnote: mark all .note sections SHF_ALLOC -
[Kernel-packages] [Bug 1885932] Re: Xenial update: v4.4.229 upstream stable release
This bug was fixed in the package linux - 4.4.0-187.217 --- linux (4.4.0-187.217) xenial; urgency=medium * xenial/linux: 4.4.0-187.217 -proposed tracker (LP: #1888274) * Regression in kernel 4.15.0-91 causes kernel panic with Bcache (LP: #1867916) - bcache: check and adjust logical block size for backing devices * Xenial update: v4.4.230 upstream stable release (LP: #1887011) - btrfs: cow_file_range() num_bytes and disk_num_bytes are same - btrfs: fix data block group relocation failure due to concurrent scrub - mm: fix swap cache node allocation mask - EDAC/amd64: Read back the scrub rate PCI register on F15h - mm/slub: fix stack overruns with SLUB_STATS - usb: usbtest: fix missing kfree(dev->buf) in usbtest_disconnect - kgdb: Avoid suspicious RCU usage warning - crypto: af_alg - fix use-after-free in af_alg_accept() due to bh_lock_sock() - sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds - hwmon: (max6697) Make sure the OVERT mask is set correctly - hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add() - virtio-blk: free vblk-vqs in error path of virtblk_probe() - i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665 - Revert "ALSA: usb-audio: Improve frames size computation" - SMB3: Honor 'seal' flag for multiuser mounts - SMB3: Honor persistent/resilient handle flags for multiuser mounts - cifs: Fix the target file was deleted when rename failed. - MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen - netfilter: nf_conntrack_h323: lost .data_len definition for Q.931/ipv6 - Linux 4.4.230 * Xenial update: v4.4.229 upstream stable release (LP: #1885932) - s390: fix syscall_get_error for compat processes - clk: sunxi: Fix incorrect usage of round_down() - i2c: piix4: Detect secondary SMBus controller on AMD AM4 chipsets - clk: qcom: msm8916: Fix the address location of pll->config_reg - ALSA: isa/wavefront: prevent out of bounds write in ioctl - scsi: qla2xxx: Fix issue with adapter's stopping state - i2c: pxa: clear all master action bits in i2c_pxa_stop_message() - usblp: poison URBs upon disconnect - ps3disk: use the default segment boundary - vfio/pci: fix memory leaks in alloc_perm_bits() - mfd: wm8994: Fix driver operation if loaded as modules - scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event - nfsd: Fix svc_xprt refcnt leak when setup callback client failed - powerpc/crashkernel: Take "mem=" option into account - yam: fix possible memory leak in yam_init_driver - mksysmap: Fix the mismatch of '.L' symbols in System.map - scsi: sr: Fix sr_probe() missing deallocate of device minor - scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM - ALSA: usb-audio: Improve frames size computation - s390/qdio: put thinint indicator after early error - tty: hvc: Fix data abort due to race in hvc_open - staging: sm750fb: add missing case while setting FB_VISUAL - i2c: pxa: fix i2c_pxa_scream_blue_murder() debug output - serial: amba-pl011: Make sure we initialize the port.lock spinlock - drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish - PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges - power: supply: smb347-charger: IRQSTAT_D is volatile - scsi: mpt3sas: Fix double free warnings - dlm: remove BUG() before panic() - clk: ti: composite: fix memory leak - tty: n_gsm: Fix SOF skipping - tty: n_gsm: Fix waking up upper tty layer when room available - powerpc/pseries/ras: Fix FWNMI_VALID off by one - powerpc/ps3: Fix kexec shutdown hang - vfio-pci: Mask cap zero - usb/ohci-platform: Fix a warning when hibernating - USB: host: ehci-mxc: Add error handling in ehci_mxc_drv_probe() - tty: n_gsm: Fix bogus i++ in gsm_data_kick - clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1 - watchdog: da9062: No need to ping manually before setting timeout - usb: dwc2: gadget: move gadget resume after the core is in L0 state - USB: gadget: udc: s3c2410_udc: Remove pointless NULL check in s3c2410_udc_nuke - usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check - usb: gadget: fix potential double-free in m66592_probe. - net: sunrpc: Fix off-by-one issues in 'rpc_ntop6' - ASoC: fsl_asrc_dma: Fix dma_chan leak when config DMA channel failed - openrisc: Fix issue with argument clobbering for clone/fork - gfs2: Allow lock_nolock mount to specify jid=X - scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj - lib/zlib: remove outdated and incorrect pre-increment optimization - include/linux/bitops.h: avoid clang shift-count-overflow warnings - elfnote: mark all .note sections SHF_ALLOC -
[Kernel-packages] [Bug 1867983] Re: Computer is frozen after suspend
This bug was fixed in the package linux - 4.4.0-187.217 --- linux (4.4.0-187.217) xenial; urgency=medium * xenial/linux: 4.4.0-187.217 -proposed tracker (LP: #1888274) * Regression in kernel 4.15.0-91 causes kernel panic with Bcache (LP: #1867916) - bcache: check and adjust logical block size for backing devices * Xenial update: v4.4.230 upstream stable release (LP: #1887011) - btrfs: cow_file_range() num_bytes and disk_num_bytes are same - btrfs: fix data block group relocation failure due to concurrent scrub - mm: fix swap cache node allocation mask - EDAC/amd64: Read back the scrub rate PCI register on F15h - mm/slub: fix stack overruns with SLUB_STATS - usb: usbtest: fix missing kfree(dev->buf) in usbtest_disconnect - kgdb: Avoid suspicious RCU usage warning - crypto: af_alg - fix use-after-free in af_alg_accept() due to bh_lock_sock() - sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds - hwmon: (max6697) Make sure the OVERT mask is set correctly - hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add() - virtio-blk: free vblk-vqs in error path of virtblk_probe() - i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665 - Revert "ALSA: usb-audio: Improve frames size computation" - SMB3: Honor 'seal' flag for multiuser mounts - SMB3: Honor persistent/resilient handle flags for multiuser mounts - cifs: Fix the target file was deleted when rename failed. - MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen - netfilter: nf_conntrack_h323: lost .data_len definition for Q.931/ipv6 - Linux 4.4.230 * Xenial update: v4.4.229 upstream stable release (LP: #1885932) - s390: fix syscall_get_error for compat processes - clk: sunxi: Fix incorrect usage of round_down() - i2c: piix4: Detect secondary SMBus controller on AMD AM4 chipsets - clk: qcom: msm8916: Fix the address location of pll->config_reg - ALSA: isa/wavefront: prevent out of bounds write in ioctl - scsi: qla2xxx: Fix issue with adapter's stopping state - i2c: pxa: clear all master action bits in i2c_pxa_stop_message() - usblp: poison URBs upon disconnect - ps3disk: use the default segment boundary - vfio/pci: fix memory leaks in alloc_perm_bits() - mfd: wm8994: Fix driver operation if loaded as modules - scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event - nfsd: Fix svc_xprt refcnt leak when setup callback client failed - powerpc/crashkernel: Take "mem=" option into account - yam: fix possible memory leak in yam_init_driver - mksysmap: Fix the mismatch of '.L' symbols in System.map - scsi: sr: Fix sr_probe() missing deallocate of device minor - scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM - ALSA: usb-audio: Improve frames size computation - s390/qdio: put thinint indicator after early error - tty: hvc: Fix data abort due to race in hvc_open - staging: sm750fb: add missing case while setting FB_VISUAL - i2c: pxa: fix i2c_pxa_scream_blue_murder() debug output - serial: amba-pl011: Make sure we initialize the port.lock spinlock - drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish - PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges - power: supply: smb347-charger: IRQSTAT_D is volatile - scsi: mpt3sas: Fix double free warnings - dlm: remove BUG() before panic() - clk: ti: composite: fix memory leak - tty: n_gsm: Fix SOF skipping - tty: n_gsm: Fix waking up upper tty layer when room available - powerpc/pseries/ras: Fix FWNMI_VALID off by one - powerpc/ps3: Fix kexec shutdown hang - vfio-pci: Mask cap zero - usb/ohci-platform: Fix a warning when hibernating - USB: host: ehci-mxc: Add error handling in ehci_mxc_drv_probe() - tty: n_gsm: Fix bogus i++ in gsm_data_kick - clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1 - watchdog: da9062: No need to ping manually before setting timeout - usb: dwc2: gadget: move gadget resume after the core is in L0 state - USB: gadget: udc: s3c2410_udc: Remove pointless NULL check in s3c2410_udc_nuke - usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check - usb: gadget: fix potential double-free in m66592_probe. - net: sunrpc: Fix off-by-one issues in 'rpc_ntop6' - ASoC: fsl_asrc_dma: Fix dma_chan leak when config DMA channel failed - openrisc: Fix issue with argument clobbering for clone/fork - gfs2: Allow lock_nolock mount to specify jid=X - scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj - lib/zlib: remove outdated and incorrect pre-increment optimization - include/linux/bitops.h: avoid clang shift-count-overflow warnings - elfnote: mark all .note sections SHF_ALLOC -
[Kernel-packages] [Bug 1776563]
Add: acpi_osi='Windows 2018' acpi_backlight=vendor in grub boot parameters and use kernel 5.4,for me it doesnt blink at all i've tested thoroughly.Laptop was always charged while tested though. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776563 Title: Acer Aspire A315 IOAPIC failure on Ubuntu 18.04, kernel hangs, can't load, kernel freeze (AMD Ryzen 5/Radeon/Raven) / AMDGPU Hybrid crash Status in amd: Fix Released Status in Linux: Fix Released Status in linux package in Ubuntu: Triaged Bug description: CPU: Ryzen 5 2500U VGA: Radeon 535 Notebook: Acer Aspire A315 This is a brand new notebook on the market with Ryzen 5/Radeon. The default kernel of Ubuntu(18.04) hangs at loading with message: tsc: Refined TSC clocksource calibration: 1996.250 MHz clocksource: tsc: mask: 0x max_cycles: (...), max_idle_ns: (...) Soft lockup Using pci=noacpi kernel parameter kernel loads without any problem but my notebook produces more heat than on Win10. If I know right Acer notebooks need ACPI to the correct power management. The same thing happens on mainline 4.17,4.18rc1-2. BIOS upgrade to the latest version: 1.08 hasn't helped This problem has been reported upstream: https://bugzilla.kernel.org/show_bug.cgi?id=200087 The latest correctly working kernel was 4.13.* but the heat problem was present with this too. To manage notifications about this bug go to: https://bugs.launchpad.net/amd/+bug/1776563/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1776563]
haha, it seems it blinks even not on max brightness while charging (didn't use your workaround). -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776563 Title: Acer Aspire A315 IOAPIC failure on Ubuntu 18.04, kernel hangs, can't load, kernel freeze (AMD Ryzen 5/Radeon/Raven) / AMDGPU Hybrid crash Status in amd: Fix Released Status in Linux: Fix Released Status in linux package in Ubuntu: Triaged Bug description: CPU: Ryzen 5 2500U VGA: Radeon 535 Notebook: Acer Aspire A315 This is a brand new notebook on the market with Ryzen 5/Radeon. The default kernel of Ubuntu(18.04) hangs at loading with message: tsc: Refined TSC clocksource calibration: 1996.250 MHz clocksource: tsc: mask: 0x max_cycles: (...), max_idle_ns: (...) Soft lockup Using pci=noacpi kernel parameter kernel loads without any problem but my notebook produces more heat than on Win10. If I know right Acer notebooks need ACPI to the correct power management. The same thing happens on mainline 4.17,4.18rc1-2. BIOS upgrade to the latest version: 1.08 hasn't helped This problem has been reported upstream: https://bugzilla.kernel.org/show_bug.cgi?id=200087 The latest correctly working kernel was 4.13.* but the heat problem was present with this too. To manage notifications about this bug go to: https://bugs.launchpad.net/amd/+bug/1776563/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891528] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1891528 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1891528 Title: fix ftrace pid filtering on linux 5.8 Status in ubuntu-kernel-tests: In Progress Status in linux package in Ubuntu: Incomplete Status in linux source package in Groovy: Incomplete Bug description: A couple of ftrace kernel self test regression tests are failing on systems with 1 CPU, notably small 1 CPU cloud instances. The two tests that are failing are: [20] ftrace - function graph filters with stack tracer [21] ftrace - function graph filters Bisected this down to commit 717e3f5ebc82 ("ftrace: Make function trace pid filtering a bit more exact") in linux 5.6-rc4 and found and tested an upstream fix to this issue with the commit c58b6b0372de ("ftrace: Fix ftrace_trace_task return value"). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1891528/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891528] Re: fix ftrace pid filtering on linux 5.8
** Also affects: linux (Ubuntu) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Groovy) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1891528 Title: fix ftrace pid filtering on linux 5.8 Status in ubuntu-kernel-tests: In Progress Status in linux package in Ubuntu: Incomplete Status in linux source package in Groovy: Incomplete Bug description: A couple of ftrace kernel self test regression tests are failing on systems with 1 CPU, notably small 1 CPU cloud instances. The two tests that are failing are: [20] ftrace - function graph filters with stack tracer [21] ftrace - function graph filters Bisected this down to commit 717e3f5ebc82 ("ftrace: Make function trace pid filtering a bit more exact") in linux 5.6-rc4 and found and tested an upstream fix to this issue with the commit c58b6b0372de ("ftrace: Fix ftrace_trace_task return value"). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1891528/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891461] Re: Add proper USB audio support for Lenovo ThinkStation P620
The attachment "pulseaudio_13.99.1-1ubuntu9.debdiff" seems to be a debdiff. The ubuntu-sponsors team has been subscribed to the bug report so that they can review and hopefully sponsor the debdiff. If the attachment isn't a patch, please remove the "patch" flag from the attachment, remove the "patch" tag, and if you are member of the ~ubuntu-sponsors, unsubscribe the team. [This is an automated message performed by a Launchpad user owned by ~brian-murray, for any issue please contact him.] ** Tags added: patch -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1891461 Title: Add proper USB audio support for Lenovo ThinkStation P620 Status in alsa-lib package in Ubuntu: Incomplete Status in alsa-ucm-conf package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Status in alsa-lib source package in Focal: New Status in alsa-ucm-conf source package in Focal: New Status in pulseaudio source package in Focal: New Status in alsa-lib source package in Groovy: Incomplete Status in alsa-ucm-conf source package in Groovy: Incomplete Status in pulseaudio source package in Groovy: Incomplete Bug description: [Impact] Lenovo ThinkStation P620 uses TRX4 board, which doesn't have PCI audio in its chipset. Instead, it's equipped with two USB audio devices, "Main", which is for internal speaker and front headset, and "Rear", which is for rear panel I/Os. However, both USB audio don't really work out of the box. Issues and fixes will be described together below. [Fix for alsa-lib] 1) Both USB audio devices don't have S/PDIF port, so we need to disable them: https://git.alsa-project.org/?p=alsa-lib.git;a=commit;h=464c2f8b61855cb22d61c4b232f74d6767fac5fb [Fix for alsa-ucm-conf] 2) PulseAudio doesn't assign the correct stream for "Main" device, audio output stays at "Speaker" after "Headset" is selected. So we need UCM to let PulseAudio understand correct stream assignment. In addition to that, in order to not let headset port availability invalidate speaker profile, we need two UCM profiles to separate "Speaker" and "Headset" logically: https://github.com/alsa-project/alsa-ucm-conf/pull/42 [Fix for PulseAudio] 3) USB audio devices, UAC v2 and v3, support jack detection (insertion control). However, PulseAudio doesn't monitor USB jack mixer controls, so jack detection doesn't work at userspace level. We need to let PulseAudio be aware those jacks: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/e153fb870618b1dcf65f6fce1667ea76acc5a28b 4) When a headset gets plugged, PulseAudio switches the profile from "Speaker" to "Headset" automatically. However, when headset gets unplugged, PulseAudio switch the profile from "Headset" to "HDMI", skipping the "Speaker" profile. We need to fix priorities for profiles that are created from UCM to avoid the problem: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/dd70c3c5890ce27b9ba4bd041dea4a01c3e1fc0f [Test] Under g-c-c's Sound tab, "Speaker", "Headphone", "S/PDIF", etc. profiles are all selectable. Sound comes out from speaker even if "Headphone" is chosen. Microphone is already selected though there's no microphone plugged. With the above fix all applied, open Gnome Control Center -> Sound tab. Sink "Speaker" is selected. Only "Speaker" and "HDMI" are in the drop down menu. Plug a headset to front port, "Headphone" and "Microphone" appears and automatically becomes default. Unplug the headset, sink switches back to "Speaker", and source switches to none. Plug line-in, line-out and microphone to the rear panel, jack detection works for all three ports, and they all work correctly. Unplug rear line-in, line-out or microphone makes the option in dropdown menu disappears. On other systems, nothing changed. [Regression Potential] For fix 1) and 2), The UCM in alsa-lib and alsa-ucm-conf strictly match kernel provided profile name, so no other device will be affected. For fix 3), if there are UAC v2/v3 devices claim to support jack detection but don't really support it, this will make the PulseAudio consider its availability to "no". AFAIK, the USB audios that have jack ports are mostly docking stations, which already have their own UCM profiles or PulseAudio profile-sets, so they are unaffected by this change. If we ever see this kind of regression, the proper fix is to disable jack detection from kernel side. For fix 4), if user depends on the old behavior (i.e. switch to another card while other profiles are still available), this will bring a behavioral change. However, all available profiles will still be available after the fix, so users can still be chose the preferred profile from the g-c-c dropdown menu. To manage notifications about this bug go to:
[Kernel-packages] [Bug 1880503] Re: aarch64 kernel module for exfat not in raspberry pi 4 build
This bug was fixed in the package linux-raspi - 5.4.0-1015.15 --- linux-raspi (5.4.0-1015.15) focal; urgency=medium * focal/linux-raspi: 5.4.0-1015.15 -proposed tracker (LP: #1887056) [ Ubuntu: 5.4.0-42.46 ] * focal/linux: 5.4.0-42.46 -proposed tracker (LP: #1887069) * linux 4.15.0-109-generic network DoS regression vs -108 (LP: #1886668) - SAUCE: Revert "netprio_cgroup: Fix unlimited memory leak of v2 cgroups" linux-raspi (5.4.0-1014.14) focal; urgency=medium * focal/linux-raspi: 5.4.0-1014.14 -proposed tracker (LP: #1885841) * Add crda dependency (LP: #1877415) - [Packaging] raspi: Depend on crda * dtoverlay=uart4 breaks Raspberry Pi 4B boot (LP: #1875454) - SAUCE: arm: dts: Add 'brcm, bcm2835-pl011' for compatible for uart2-5 * aarch64 kernel module for exfat not in raspberry pi 4 build (LP: #1880503) - [Config] raspi: Set EXFAT_FS=m * Enable ZFS for Raspberry Pi arm64 (LP: #1884110) - [Config] raspi: Enable zfs modules for arm64 * focal/linux-raspi: Upstream raspberrypi patchset 2020-06-10 (LP: #1882930) - Revert "net: bcmgenet: Workaround for Pi 4B network issue" - Revert "gpiolib: Don't prevent IRQ usage of output GPIOs" - gpiolib: Don't prevent IRQ usage of output GPIOs - drm/vc4: Fix HDMI mode validation - clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks - bcm2835-dma: Add proper 40-bit DMA support - overlays: tc358743: Use intra-overlay fragments - overlays: Move "fixed-clock" nodes to the root - raspberrypi: dts: Switch to discrete ALSA devices - dt-bindings: media: i2c: Add IMX477 CMOS sensor binding - dtoverlays: Add IMX477 sensor overlay - media: i2c: Add driver for Sony IMX477 sensor - media: i2c: imx477: Add support for adaptive frame control - configs: Add imx477 sensor driver to all Raspberry Pi defconfigs - udmabuf: Remove deleted map/unmap handlers. - udmabuf: use cache_sgt_mapping option - udmabuf: add a pointer to the miscdevice in dma-buf private data - udmabuf: separate out creating/destroying scatter-table - udmabuf: implement begin_cpu_access/end_cpu_access hooks - udmabuf: fix dma-buf cpu access - dma-buf: Add dma-buf heaps framework - dma-buf: heaps: Add heap helpers - dma-buf: heaps: Add system heap to dmabuf heaps - dma-buf: heaps: Add CMA heap to dmabuf heaps - kselftests: Add dma-heap test - dma-buf: heaps: Use _IOCTL_ for userspace IOCTL identifier - dma-buf: heaps: Remove redundant heap identifier from system heap name - dma-buf: fix resource leak on -ENOTTY error return path - dma-heap: Make the symbol 'dma_heap_ioctl_cmds' static - defconfig: Add CMA and system dma-heaps to the config - ARM: dts: Enable firmware-clocks on all Pis - configs: Include the firmware-clocks driver - configs: Use the upstream cpufreq driver - media: bcm2835-unicam: Always service interrupts - sc16is7xx: Fix for hardware flow control - drm/vc4: Fix VIC usage with Broadcast RGB - staging: vc04_services: mmal-vchiq: Update parameters list - staging:vc04_services: bcm2835-codec: Request headers with I-frame - staging:vc04_services: bcm2835-codec: Avoid fragmenting buffers - staging:vc04_services: bcm2835-camera: Request headers with I-frame - configs: Restore missing NF_TABLES settings - overlays: Fix audio parameter of vc4-kms-v3d - Switch to snd_soc_dai_set_bclk_ratio - media: bcm2835-unicam: Retain packing information on G_FMT - zswap: Defer zswap initialisation - configs: Add ZSWAP=y, ZBUD=m, Z3FOLD=m - drm/vc4: Adopt the dma configuration from the HVS or V3D component - drm/vc4: Add FKMS as an acceptable node for dma ranges. - media: i2c: imx477: Return correct result on sensor id verification - staging: vchiq_arm: Clean up 40-bit DMA support - ARM: dts: Update for new VCHIQ BCM2711 DMA support - media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1 - dt-bindings: Add Broadcom AVS RO thermal - thermal: Add BCM2711 thermal driver - ARM: dts: bcm2711: Enable thermal - ARM: configs: Build BCM2711 thermal as module - Revert "thermal: brcmstb_thermal: Correct SoC name" - Revert "thermal: brcmstb_thermal: Add BCM2838 support" - ARM: dts: bcm2711-rpi: Remove downstream thermal sensor node - configs: Switch to upstream thermal sensor for RPi 4 - BCM2711_THERMAL - configs: Build HWMON core into kernel - brcmfmac: BCM43436 needs dedicated firmware - overlays: i2c-rtc: Fix trickle-resistor-ohms param - overlays: gpio-shutdown: Add information for SysV init / inittab - overlays: gpio-shutdown: Add information for Raspberry Pi 1 Model B rev 1 - overlays: Add spi0 overlay to support sc16is752 - net: rtl8192cu: fix gcc misleading whitespace warning - overlays: i2c-rtc-gpio: Fix trickle-resistor-ohms param - media: bcm2835-isp: fix bytes per
[Kernel-packages] [Bug 1875454] Re: dtoverlay=uart4 breaks Raspberry Pi 4B boot
This bug was fixed in the package linux-raspi - 5.4.0-1015.15 --- linux-raspi (5.4.0-1015.15) focal; urgency=medium * focal/linux-raspi: 5.4.0-1015.15 -proposed tracker (LP: #1887056) [ Ubuntu: 5.4.0-42.46 ] * focal/linux: 5.4.0-42.46 -proposed tracker (LP: #1887069) * linux 4.15.0-109-generic network DoS regression vs -108 (LP: #1886668) - SAUCE: Revert "netprio_cgroup: Fix unlimited memory leak of v2 cgroups" linux-raspi (5.4.0-1014.14) focal; urgency=medium * focal/linux-raspi: 5.4.0-1014.14 -proposed tracker (LP: #1885841) * Add crda dependency (LP: #1877415) - [Packaging] raspi: Depend on crda * dtoverlay=uart4 breaks Raspberry Pi 4B boot (LP: #1875454) - SAUCE: arm: dts: Add 'brcm, bcm2835-pl011' for compatible for uart2-5 * aarch64 kernel module for exfat not in raspberry pi 4 build (LP: #1880503) - [Config] raspi: Set EXFAT_FS=m * Enable ZFS for Raspberry Pi arm64 (LP: #1884110) - [Config] raspi: Enable zfs modules for arm64 * focal/linux-raspi: Upstream raspberrypi patchset 2020-06-10 (LP: #1882930) - Revert "net: bcmgenet: Workaround for Pi 4B network issue" - Revert "gpiolib: Don't prevent IRQ usage of output GPIOs" - gpiolib: Don't prevent IRQ usage of output GPIOs - drm/vc4: Fix HDMI mode validation - clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks - bcm2835-dma: Add proper 40-bit DMA support - overlays: tc358743: Use intra-overlay fragments - overlays: Move "fixed-clock" nodes to the root - raspberrypi: dts: Switch to discrete ALSA devices - dt-bindings: media: i2c: Add IMX477 CMOS sensor binding - dtoverlays: Add IMX477 sensor overlay - media: i2c: Add driver for Sony IMX477 sensor - media: i2c: imx477: Add support for adaptive frame control - configs: Add imx477 sensor driver to all Raspberry Pi defconfigs - udmabuf: Remove deleted map/unmap handlers. - udmabuf: use cache_sgt_mapping option - udmabuf: add a pointer to the miscdevice in dma-buf private data - udmabuf: separate out creating/destroying scatter-table - udmabuf: implement begin_cpu_access/end_cpu_access hooks - udmabuf: fix dma-buf cpu access - dma-buf: Add dma-buf heaps framework - dma-buf: heaps: Add heap helpers - dma-buf: heaps: Add system heap to dmabuf heaps - dma-buf: heaps: Add CMA heap to dmabuf heaps - kselftests: Add dma-heap test - dma-buf: heaps: Use _IOCTL_ for userspace IOCTL identifier - dma-buf: heaps: Remove redundant heap identifier from system heap name - dma-buf: fix resource leak on -ENOTTY error return path - dma-heap: Make the symbol 'dma_heap_ioctl_cmds' static - defconfig: Add CMA and system dma-heaps to the config - ARM: dts: Enable firmware-clocks on all Pis - configs: Include the firmware-clocks driver - configs: Use the upstream cpufreq driver - media: bcm2835-unicam: Always service interrupts - sc16is7xx: Fix for hardware flow control - drm/vc4: Fix VIC usage with Broadcast RGB - staging: vc04_services: mmal-vchiq: Update parameters list - staging:vc04_services: bcm2835-codec: Request headers with I-frame - staging:vc04_services: bcm2835-codec: Avoid fragmenting buffers - staging:vc04_services: bcm2835-camera: Request headers with I-frame - configs: Restore missing NF_TABLES settings - overlays: Fix audio parameter of vc4-kms-v3d - Switch to snd_soc_dai_set_bclk_ratio - media: bcm2835-unicam: Retain packing information on G_FMT - zswap: Defer zswap initialisation - configs: Add ZSWAP=y, ZBUD=m, Z3FOLD=m - drm/vc4: Adopt the dma configuration from the HVS or V3D component - drm/vc4: Add FKMS as an acceptable node for dma ranges. - media: i2c: imx477: Return correct result on sensor id verification - staging: vchiq_arm: Clean up 40-bit DMA support - ARM: dts: Update for new VCHIQ BCM2711 DMA support - media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1 - dt-bindings: Add Broadcom AVS RO thermal - thermal: Add BCM2711 thermal driver - ARM: dts: bcm2711: Enable thermal - ARM: configs: Build BCM2711 thermal as module - Revert "thermal: brcmstb_thermal: Correct SoC name" - Revert "thermal: brcmstb_thermal: Add BCM2838 support" - ARM: dts: bcm2711-rpi: Remove downstream thermal sensor node - configs: Switch to upstream thermal sensor for RPi 4 - BCM2711_THERMAL - configs: Build HWMON core into kernel - brcmfmac: BCM43436 needs dedicated firmware - overlays: i2c-rtc: Fix trickle-resistor-ohms param - overlays: gpio-shutdown: Add information for SysV init / inittab - overlays: gpio-shutdown: Add information for Raspberry Pi 1 Model B rev 1 - overlays: Add spi0 overlay to support sc16is752 - net: rtl8192cu: fix gcc misleading whitespace warning - overlays: i2c-rtc-gpio: Fix trickle-resistor-ohms param - media: bcm2835-isp: fix bytes per
[Kernel-packages] [Bug 1877415] Re: Add crda dependency
This bug was fixed in the package linux-raspi - 5.4.0-1015.15 --- linux-raspi (5.4.0-1015.15) focal; urgency=medium * focal/linux-raspi: 5.4.0-1015.15 -proposed tracker (LP: #1887056) [ Ubuntu: 5.4.0-42.46 ] * focal/linux: 5.4.0-42.46 -proposed tracker (LP: #1887069) * linux 4.15.0-109-generic network DoS regression vs -108 (LP: #1886668) - SAUCE: Revert "netprio_cgroup: Fix unlimited memory leak of v2 cgroups" linux-raspi (5.4.0-1014.14) focal; urgency=medium * focal/linux-raspi: 5.4.0-1014.14 -proposed tracker (LP: #1885841) * Add crda dependency (LP: #1877415) - [Packaging] raspi: Depend on crda * dtoverlay=uart4 breaks Raspberry Pi 4B boot (LP: #1875454) - SAUCE: arm: dts: Add 'brcm, bcm2835-pl011' for compatible for uart2-5 * aarch64 kernel module for exfat not in raspberry pi 4 build (LP: #1880503) - [Config] raspi: Set EXFAT_FS=m * Enable ZFS for Raspberry Pi arm64 (LP: #1884110) - [Config] raspi: Enable zfs modules for arm64 * focal/linux-raspi: Upstream raspberrypi patchset 2020-06-10 (LP: #1882930) - Revert "net: bcmgenet: Workaround for Pi 4B network issue" - Revert "gpiolib: Don't prevent IRQ usage of output GPIOs" - gpiolib: Don't prevent IRQ usage of output GPIOs - drm/vc4: Fix HDMI mode validation - clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks - bcm2835-dma: Add proper 40-bit DMA support - overlays: tc358743: Use intra-overlay fragments - overlays: Move "fixed-clock" nodes to the root - raspberrypi: dts: Switch to discrete ALSA devices - dt-bindings: media: i2c: Add IMX477 CMOS sensor binding - dtoverlays: Add IMX477 sensor overlay - media: i2c: Add driver for Sony IMX477 sensor - media: i2c: imx477: Add support for adaptive frame control - configs: Add imx477 sensor driver to all Raspberry Pi defconfigs - udmabuf: Remove deleted map/unmap handlers. - udmabuf: use cache_sgt_mapping option - udmabuf: add a pointer to the miscdevice in dma-buf private data - udmabuf: separate out creating/destroying scatter-table - udmabuf: implement begin_cpu_access/end_cpu_access hooks - udmabuf: fix dma-buf cpu access - dma-buf: Add dma-buf heaps framework - dma-buf: heaps: Add heap helpers - dma-buf: heaps: Add system heap to dmabuf heaps - dma-buf: heaps: Add CMA heap to dmabuf heaps - kselftests: Add dma-heap test - dma-buf: heaps: Use _IOCTL_ for userspace IOCTL identifier - dma-buf: heaps: Remove redundant heap identifier from system heap name - dma-buf: fix resource leak on -ENOTTY error return path - dma-heap: Make the symbol 'dma_heap_ioctl_cmds' static - defconfig: Add CMA and system dma-heaps to the config - ARM: dts: Enable firmware-clocks on all Pis - configs: Include the firmware-clocks driver - configs: Use the upstream cpufreq driver - media: bcm2835-unicam: Always service interrupts - sc16is7xx: Fix for hardware flow control - drm/vc4: Fix VIC usage with Broadcast RGB - staging: vc04_services: mmal-vchiq: Update parameters list - staging:vc04_services: bcm2835-codec: Request headers with I-frame - staging:vc04_services: bcm2835-codec: Avoid fragmenting buffers - staging:vc04_services: bcm2835-camera: Request headers with I-frame - configs: Restore missing NF_TABLES settings - overlays: Fix audio parameter of vc4-kms-v3d - Switch to snd_soc_dai_set_bclk_ratio - media: bcm2835-unicam: Retain packing information on G_FMT - zswap: Defer zswap initialisation - configs: Add ZSWAP=y, ZBUD=m, Z3FOLD=m - drm/vc4: Adopt the dma configuration from the HVS or V3D component - drm/vc4: Add FKMS as an acceptable node for dma ranges. - media: i2c: imx477: Return correct result on sensor id verification - staging: vchiq_arm: Clean up 40-bit DMA support - ARM: dts: Update for new VCHIQ BCM2711 DMA support - media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1 - dt-bindings: Add Broadcom AVS RO thermal - thermal: Add BCM2711 thermal driver - ARM: dts: bcm2711: Enable thermal - ARM: configs: Build BCM2711 thermal as module - Revert "thermal: brcmstb_thermal: Correct SoC name" - Revert "thermal: brcmstb_thermal: Add BCM2838 support" - ARM: dts: bcm2711-rpi: Remove downstream thermal sensor node - configs: Switch to upstream thermal sensor for RPi 4 - BCM2711_THERMAL - configs: Build HWMON core into kernel - brcmfmac: BCM43436 needs dedicated firmware - overlays: i2c-rtc: Fix trickle-resistor-ohms param - overlays: gpio-shutdown: Add information for SysV init / inittab - overlays: gpio-shutdown: Add information for Raspberry Pi 1 Model B rev 1 - overlays: Add spi0 overlay to support sc16is752 - net: rtl8192cu: fix gcc misleading whitespace warning - overlays: i2c-rtc-gpio: Fix trickle-resistor-ohms param - media: bcm2835-isp: fix bytes per
[Kernel-packages] [Bug 1876259] Re: bcm2835-codec module is missing
This bug was fixed in the package linux-raspi - 5.4.0-1015.15 --- linux-raspi (5.4.0-1015.15) focal; urgency=medium * focal/linux-raspi: 5.4.0-1015.15 -proposed tracker (LP: #1887056) [ Ubuntu: 5.4.0-42.46 ] * focal/linux: 5.4.0-42.46 -proposed tracker (LP: #1887069) * linux 4.15.0-109-generic network DoS regression vs -108 (LP: #1886668) - SAUCE: Revert "netprio_cgroup: Fix unlimited memory leak of v2 cgroups" linux-raspi (5.4.0-1014.14) focal; urgency=medium * focal/linux-raspi: 5.4.0-1014.14 -proposed tracker (LP: #1885841) * Add crda dependency (LP: #1877415) - [Packaging] raspi: Depend on crda * dtoverlay=uart4 breaks Raspberry Pi 4B boot (LP: #1875454) - SAUCE: arm: dts: Add 'brcm, bcm2835-pl011' for compatible for uart2-5 * aarch64 kernel module for exfat not in raspberry pi 4 build (LP: #1880503) - [Config] raspi: Set EXFAT_FS=m * Enable ZFS for Raspberry Pi arm64 (LP: #1884110) - [Config] raspi: Enable zfs modules for arm64 * focal/linux-raspi: Upstream raspberrypi patchset 2020-06-10 (LP: #1882930) - Revert "net: bcmgenet: Workaround for Pi 4B network issue" - Revert "gpiolib: Don't prevent IRQ usage of output GPIOs" - gpiolib: Don't prevent IRQ usage of output GPIOs - drm/vc4: Fix HDMI mode validation - clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks - bcm2835-dma: Add proper 40-bit DMA support - overlays: tc358743: Use intra-overlay fragments - overlays: Move "fixed-clock" nodes to the root - raspberrypi: dts: Switch to discrete ALSA devices - dt-bindings: media: i2c: Add IMX477 CMOS sensor binding - dtoverlays: Add IMX477 sensor overlay - media: i2c: Add driver for Sony IMX477 sensor - media: i2c: imx477: Add support for adaptive frame control - configs: Add imx477 sensor driver to all Raspberry Pi defconfigs - udmabuf: Remove deleted map/unmap handlers. - udmabuf: use cache_sgt_mapping option - udmabuf: add a pointer to the miscdevice in dma-buf private data - udmabuf: separate out creating/destroying scatter-table - udmabuf: implement begin_cpu_access/end_cpu_access hooks - udmabuf: fix dma-buf cpu access - dma-buf: Add dma-buf heaps framework - dma-buf: heaps: Add heap helpers - dma-buf: heaps: Add system heap to dmabuf heaps - dma-buf: heaps: Add CMA heap to dmabuf heaps - kselftests: Add dma-heap test - dma-buf: heaps: Use _IOCTL_ for userspace IOCTL identifier - dma-buf: heaps: Remove redundant heap identifier from system heap name - dma-buf: fix resource leak on -ENOTTY error return path - dma-heap: Make the symbol 'dma_heap_ioctl_cmds' static - defconfig: Add CMA and system dma-heaps to the config - ARM: dts: Enable firmware-clocks on all Pis - configs: Include the firmware-clocks driver - configs: Use the upstream cpufreq driver - media: bcm2835-unicam: Always service interrupts - sc16is7xx: Fix for hardware flow control - drm/vc4: Fix VIC usage with Broadcast RGB - staging: vc04_services: mmal-vchiq: Update parameters list - staging:vc04_services: bcm2835-codec: Request headers with I-frame - staging:vc04_services: bcm2835-codec: Avoid fragmenting buffers - staging:vc04_services: bcm2835-camera: Request headers with I-frame - configs: Restore missing NF_TABLES settings - overlays: Fix audio parameter of vc4-kms-v3d - Switch to snd_soc_dai_set_bclk_ratio - media: bcm2835-unicam: Retain packing information on G_FMT - zswap: Defer zswap initialisation - configs: Add ZSWAP=y, ZBUD=m, Z3FOLD=m - drm/vc4: Adopt the dma configuration from the HVS or V3D component - drm/vc4: Add FKMS as an acceptable node for dma ranges. - media: i2c: imx477: Return correct result on sensor id verification - staging: vchiq_arm: Clean up 40-bit DMA support - ARM: dts: Update for new VCHIQ BCM2711 DMA support - media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1 - dt-bindings: Add Broadcom AVS RO thermal - thermal: Add BCM2711 thermal driver - ARM: dts: bcm2711: Enable thermal - ARM: configs: Build BCM2711 thermal as module - Revert "thermal: brcmstb_thermal: Correct SoC name" - Revert "thermal: brcmstb_thermal: Add BCM2838 support" - ARM: dts: bcm2711-rpi: Remove downstream thermal sensor node - configs: Switch to upstream thermal sensor for RPi 4 - BCM2711_THERMAL - configs: Build HWMON core into kernel - brcmfmac: BCM43436 needs dedicated firmware - overlays: i2c-rtc: Fix trickle-resistor-ohms param - overlays: gpio-shutdown: Add information for SysV init / inittab - overlays: gpio-shutdown: Add information for Raspberry Pi 1 Model B rev 1 - overlays: Add spi0 overlay to support sc16is752 - net: rtl8192cu: fix gcc misleading whitespace warning - overlays: i2c-rtc-gpio: Fix trickle-resistor-ohms param - media: bcm2835-isp: fix bytes per
[Kernel-packages] [Bug 1888510] Re: xen-netfront: potential deadlock in xennet_remove()
This bug was fixed in the package linux-aws - 5.4.0-1021.21 --- linux-aws (5.4.0-1021.21) focal; urgency=medium * focal/linux-aws: 5.4.0-1021.21 -proposed tracker (LP: #111) * xen-netfront: potential deadlock in xennet_remove() (LP: #1888510) - SAUCE: xen-netfront: fix potential deadlock in xennet_remove() -- Stefan Bader Fri, 24 Jul 2020 11:24:21 +0200 ** Changed in: linux-aws (Ubuntu) Status: Invalid => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-aws in Ubuntu. https://bugs.launchpad.net/bugs/1888510 Title: xen-netfront: potential deadlock in xennet_remove() Status in linux-aws package in Ubuntu: Fix Released Status in linux-aws-5.3 package in Ubuntu: Invalid Status in linux-aws source package in Bionic: Incomplete Status in linux-aws-5.3 source package in Bionic: Fix Released Status in linux-aws source package in Focal: Fix Released Status in linux-aws-5.3 source package in Focal: Invalid Bug description: [Impact] During our AWS testing we were experiencing deadlocks on hibernate across all Xen instance types. The trace was showing that the system was stuck in xennet_remove(): [ 358.109087] Freezing of tasks failed after 20.006 seconds (1 tasks refusing to freeze, wq_busy=0): [ 358.115102] modprobeD0 4892 4833 0x4004 [ 358.115104] Call Trace: [ 358.115112] __schedule+0x2a8/0x670 [ 358.115115] schedule+0x33/0xa0 [ 358.115118] xennet_remove+0x1f0/0x230 [xen_netfront] [ 358.115121] ? wait_woken+0x80/0x80 [ 358.115124] xenbus_dev_remove+0x51/0xa0 [ 358.115126] device_release_driver_internal+0xe0/0x1b0 [ 358.115127] driver_detach+0x49/0x90 [ 358.115129] bus_remove_driver+0x59/0xd0 [ 358.115131] driver_unregister+0x2c/0x40 [ 358.115132] xenbus_unregister_driver+0x12/0x20 [ 358.115134] netif_exit+0x10/0x7aa [xen_netfront] [ 358.115137] __x64_sys_delete_module+0x146/0x290 [ 358.115140] do_syscall_64+0x5a/0x130 [ 358.115142] entry_SYSCALL_64_after_hwframe+0x44/0xa9 This prevented hibernation to complete. The reason of this problem is a race condition in xennet_remove(): the system is reading the current state of the bus, it's requesting to change the state to "Closing", and it's waiting for the state to be changed to "Closing". However, if the state becomes "Closed" between reading the state and requesting the state change, we are stuck forever, because the state will never change from "Closed" back to "Closing". [Test case] Create any Xen-based instance in AWS, hibernate/resume multiple times. Some times the system gets stuck (hung task timeout). [Fix] Prevent the deadlock by changing the wait condition to check also for state == Closed. [Regression potential] Minimal, this change affects only Xen, more exactly only the xen- netfront driver. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-aws/+bug/1888510/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1889217] Re: Make digital mic on the AMD Renoir machines work under gnome desktop
This bug was fixed in the package alsa-ucm-conf - 1.2.2-1ubuntu2 --- alsa-ucm-conf (1.2.2-1ubuntu2) groovy; urgency=medium * d/p/0003-ucm-fix-wrong-If-in-sequence-in-HiFi-dual.conf.patch * d/p/0004-ucm2-add-initial-ucm.conf-for-the-latest-alsa-lib.patch * d/p/0005-sof-hda-dsp-don-t-fail-if-Auto-Mute-control-is-not-p.patch * d/p/0006-ucm.conf-add-support-for-the-kernel-module-name-tree.patch * d/p/0007-sof-hda-dsp-make-Headphone-Playback-Switch-condition.patch * d/p/0008-sof-soundwire-initial-UCM2-version.patch * d/p/0009-sof-soundwire-cleanups-recommended-by-the-ucm-valida.patch * d/p/0010-sof-soundwire-rewrite-for-syntax-3.patch * d/p/0011-HDA-Intel-add-support-for-AMD-acp-microphone-devices.patch * d/p/0012-hda-hdmi-add-HDMI4-HDMI5-HDMI6-devices.patch * d/p/0013-amd-renoir-acp-use-the-machine-driver-s-name-for-top.patch * d/p/0014-amd-renoir-acp-add-syntax-in-the-Linked.patch * d/p/0015-HDA-Intel-only-bind-the-acp-dmic-to-the-soundcard-wi.patch * d/p/0016-Fix-invalid-Regex-Type-in-various-Condition-blocks.patch Make digital mic on the AMD Renoir machines work under gnome desktop (LP: #1889217) -- Hui Wang Thu, 13 Aug 2020 16:18:58 +0200 ** Changed in: alsa-ucm-conf (Ubuntu Groovy) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1889217 Title: Make digital mic on the AMD Renoir machines work under gnome desktop Status in alsa-lib package in Ubuntu: Fix Committed Status in alsa-ucm-conf package in Ubuntu: Fix Released Status in pulseaudio package in Ubuntu: Fix Committed Status in alsa-lib source package in Focal: New Status in alsa-ucm-conf source package in Focal: New Status in pulseaudio source package in Focal: New Status in alsa-lib source package in Groovy: Fix Committed Status in alsa-ucm-conf source package in Groovy: Fix Released Status in pulseaudio source package in Groovy: Fix Committed Bug description: [Impact] On the LENOVO AMD Renoir machines, there is a digital mic directly connected to the APU instead of the codec, so there are two separate sound cards in the system, one is for analogue codec driven by hda driver, the other is for the dmic driven by ASoC acp driver. The current audio stack (pulseaudio + alsa-ucm-conf + alsa-lib) doesn't support this design yet, it could support all audio devices on the codec well, but it doesn't support that dmic well. In the gnome-control-center, the dmic becomes two input devices: analog input and multichannel input, and users can only record sound from analog input, the multichannel input can't function at all. Besides this issue, there is another issue, after users plug an external mic, the external mic can't replace the dmic automatically, this gives users a bad experience since this behaviour is different from the other audio designs. [Fix for pulseaudio] backport 3 patches: 2 of them from upstream device-port: queue CARD CHANGE event before update default sink alsa: adjust ucm sink/source priority according to ports priority 1 of them from a merge request: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/305 [Fix for alsa-ucm-conf] backport 14 patches: 11 of them from upstream: ucm-fix-wrong-If-in-sequence-in-HiFi-dual.conf.patch ucm2-add-initial-ucm.conf-for-the-latest-alsa-lib.patch sof-hda-dsp-don-t-fail-if-Auto-Mute-control-is-not-p.patch ucm.conf-add-support-for-the-kernel-module-name-tree.patch sof-hda-dsp-make-Headphone-Playback-Switch-condition.patch sof-soundwire-initial-UCM2-version.patch sof-soundwire-cleanups-recommended-by-the-ucm-valida.patch sof-soundwire-rewrite-for-syntax-3.patch HDA-Intel-add-support-for-AMD-acp-microphone-devices.patch Fix-invalid-Regex-Type-in-various-Condition-blocks.patch hda-hdmi-add-HDMI4-HDMI5-HDMI6-devices.patch 3 of them from a merge request: https://github.com/alsa-project/alsa-ucm-conf/pull/41 [Fix for alsa-lib] backport 47 patches from upstream: Enabled-extended-namehints-in-alsa.conf.patch conf-add-snd_config_is_array-function.patch topology-use-snd_config_is_array-function.patch ucm-merge-the-array-items-from-the-condition-blocks.patch ucm-parse-SectionOnce-section-in-the-master-UCM-conf.patch ucm-execute-SectionDefaults-lately-when-the-first-ve.patch ucm-handle-set-_once-command.patch ucm-handle-set-_defaults-command.patch ucm-initialize-mgr-once_list.patch ucm-fix-SectionOnce-comment.patch ucm-fix-compilation-error-in-set_defaults_user.patch ucm-rename-SectionOnce-to-BootSequence.patch ucm-rename-_once-command-to-_boot-command.patch ucm-configuration-implement-in-place-Include.patch ucm-configuration-substitute-ConfDir-and-ConfTopDir.patch ucm-config-substitute-File-string-to-allow-variables.patch
[Kernel-packages] [Bug 1886908] Re: Add support for Atlantic NIC firmware v4
This bug was fixed in the package linux-oem-5.6 - 5.6.0-1021.21 --- linux-oem-5.6 (5.6.0-1021.21) focal; urgency=medium * focal/linux-oem-5.6: 5.6.0-1021.21 -proposed tracker (LP: #1889371) * Fix right speaker of HP laptop (LP: #1889375) - SAUCE: hda/realtek: Fix right speaker of HP laptop * blk_update_request error when mount nvme partition (LP: #1872383) - SAUCE: nvme-pci: prevent SK hynix PC400 from using Write Zeroes command * cgroup refcount is bogus when cgroup_sk_alloc is disabled (LP: #1886860) - cgroup: fix cgroup_sk_alloc() for sk_clone_lock() - cgroup: Fix sock_cgroup_data on big-endian. * Add support for Atlantic NIC firmware v4 (LP: #1886908) - net: atlantic: simplify hw_get_fw_version() usage - net: atlantic: align return value of ver_match function with function name - net: atlantic: add support for FW 4.x * Restart the machine successfully after suspend (LP: #1888375) - SAUCE: iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu - iommu/vt-d: Don't apply gfx quirks to untrusted devices * Wakeup the system by touching the touchpad (LP: #1888331) - gpio: gpiolib: Allow GPIO IRQs to lazy disable - HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle * soc/amd/renoir: detect dmic from acpi table (LP: #1887734) - ASoC: amd: add logic to check dmic hardware runtime - ASoC: amd: add ACPI dependency check - ASoC: amd: fixed kernel warnings * [SRU][PATCH 0/1][oem-5.6] fix amd RENOIR screen backlight issue. (LP: #1886785) - Revert "drm/amd/display: disable dcn20 abm feature for bring up" * Enable Quectel EG95 LTE modem [2c7c:0195] (LP: #1886744) - net: usb: qmi_wwan: add support for Quectel EG95 LTE modem - USB: serial: option: add Quectel EG95 LTE modem * soc/amd/renoir: change the module name to make it work with ucm3 (LP: #1888166) - AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module - remove a kernel module since its name is changed * System stops responding while entering S3 with SD card installed (LP: #1880519) - xhci: Return if xHCI doesn't support LPM - xhci: Poll for U0 after disabling USB2 LPM * [SRU][F/OEM-5.6] add a new OLED panel support for brightness control (LP: #1887909) - drm/dp: Lenovo X13 Yoga OLED panel brightness fix -- Timo Aaltonen Wed, 29 Jul 2020 21:08:56 +0300 ** Changed in: linux-oem-5.6 (Ubuntu Focal) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1886908 Title: Add support for Atlantic NIC firmware v4 Status in HWE Next: New Status in linux package in Ubuntu: Triaged Status in linux-oem-5.6 package in Ubuntu: Invalid Status in linux source package in Focal: Fix Committed Status in linux-oem-5.6 source package in Focal: Fix Released Status in linux source package in Groovy: Triaged Status in linux-oem-5.6 source package in Groovy: Invalid Bug description: [Impact] Atlantic NIC doesn't work. [Fix] Add firmware v4 support. [Test] With the patch applied, the driver probe success. Using iperf as a smoketest shows positive result. [Regression Potential] None. We were contacted by Marvell after I sent the patch to upstream, and they told us firmware v4 is created specifically for this upcoming platform. There are none firmware v4 in production. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1886908/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1872383] Re: blk_update_request error when mount nvme partition
This bug was fixed in the package linux-oem-5.6 - 5.6.0-1021.21 --- linux-oem-5.6 (5.6.0-1021.21) focal; urgency=medium * focal/linux-oem-5.6: 5.6.0-1021.21 -proposed tracker (LP: #1889371) * Fix right speaker of HP laptop (LP: #1889375) - SAUCE: hda/realtek: Fix right speaker of HP laptop * blk_update_request error when mount nvme partition (LP: #1872383) - SAUCE: nvme-pci: prevent SK hynix PC400 from using Write Zeroes command * cgroup refcount is bogus when cgroup_sk_alloc is disabled (LP: #1886860) - cgroup: fix cgroup_sk_alloc() for sk_clone_lock() - cgroup: Fix sock_cgroup_data on big-endian. * Add support for Atlantic NIC firmware v4 (LP: #1886908) - net: atlantic: simplify hw_get_fw_version() usage - net: atlantic: align return value of ver_match function with function name - net: atlantic: add support for FW 4.x * Restart the machine successfully after suspend (LP: #1888375) - SAUCE: iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu - iommu/vt-d: Don't apply gfx quirks to untrusted devices * Wakeup the system by touching the touchpad (LP: #1888331) - gpio: gpiolib: Allow GPIO IRQs to lazy disable - HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle * soc/amd/renoir: detect dmic from acpi table (LP: #1887734) - ASoC: amd: add logic to check dmic hardware runtime - ASoC: amd: add ACPI dependency check - ASoC: amd: fixed kernel warnings * [SRU][PATCH 0/1][oem-5.6] fix amd RENOIR screen backlight issue. (LP: #1886785) - Revert "drm/amd/display: disable dcn20 abm feature for bring up" * Enable Quectel EG95 LTE modem [2c7c:0195] (LP: #1886744) - net: usb: qmi_wwan: add support for Quectel EG95 LTE modem - USB: serial: option: add Quectel EG95 LTE modem * soc/amd/renoir: change the module name to make it work with ucm3 (LP: #1888166) - AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module - remove a kernel module since its name is changed * System stops responding while entering S3 with SD card installed (LP: #1880519) - xhci: Return if xHCI doesn't support LPM - xhci: Poll for U0 after disabling USB2 LPM * [SRU][F/OEM-5.6] add a new OLED panel support for brightness control (LP: #1887909) - drm/dp: Lenovo X13 Yoga OLED panel brightness fix -- Timo Aaltonen Wed, 29 Jul 2020 21:08:56 +0300 ** Changed in: linux-oem-5.6 (Ubuntu Focal) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1872383 Title: blk_update_request error when mount nvme partition Status in HWE Next: New Status in OEM Priority Project: Confirmed Status in linux package in Ubuntu: In Progress Status in linux-oem-5.6 package in Ubuntu: Invalid Status in linux source package in Focal: Fix Committed Status in linux-oem-5.6 source package in Focal: Fix Released Status in linux source package in Groovy: In Progress Bug description: [Impact] Got below error message after upgraded Focal kernel(v5.4) [ 576.793852] blk_update_request: operation not supported error, dev nvme1n1, sector 4218887 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 This issue was introduced by below commit which added write zeros command 6e02318eaea5 nvme: add support for the Write Zeroes command SK hynix firmware has a bug that it treats NLB as max value instead of a range, so the NLB passed isn't a valid value to the firmware. [Fix] Add a quirk to disable write zeros support [Test] Verified on the machine with SK hynix PC400 nvme machine. [Regression Potential] Low, it's a quirk to a specific PCI ID. == Can't install on this nvme with a focal server installer. As mount a nvme partition with kernel with focal 5.4.0-21-generic kernel endless blk_update_request error will exists in kernel dmesg. the nvme module: PC400 NVMe SK hynix 512GB While mount nvme module: PC SN720 NVMe WDC 256GB, there is no such issue. --- ProblemType: Bug AlsaVersion: Advanced Linux Sound Architecture Driver Version k5.4.0-21-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.20.11-0ubuntu26 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D2', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D10p', '/dev/snd/pcmC0D9p', '/dev/snd/pcmC0D8p', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D2c', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer'
[Kernel-packages] [Bug 1886860] Re: cgroup refcount is bogus when cgroup_sk_alloc is disabled
This bug was fixed in the package linux-oem-5.6 - 5.6.0-1021.21 --- linux-oem-5.6 (5.6.0-1021.21) focal; urgency=medium * focal/linux-oem-5.6: 5.6.0-1021.21 -proposed tracker (LP: #1889371) * Fix right speaker of HP laptop (LP: #1889375) - SAUCE: hda/realtek: Fix right speaker of HP laptop * blk_update_request error when mount nvme partition (LP: #1872383) - SAUCE: nvme-pci: prevent SK hynix PC400 from using Write Zeroes command * cgroup refcount is bogus when cgroup_sk_alloc is disabled (LP: #1886860) - cgroup: fix cgroup_sk_alloc() for sk_clone_lock() - cgroup: Fix sock_cgroup_data on big-endian. * Add support for Atlantic NIC firmware v4 (LP: #1886908) - net: atlantic: simplify hw_get_fw_version() usage - net: atlantic: align return value of ver_match function with function name - net: atlantic: add support for FW 4.x * Restart the machine successfully after suspend (LP: #1888375) - SAUCE: iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu - iommu/vt-d: Don't apply gfx quirks to untrusted devices * Wakeup the system by touching the touchpad (LP: #1888331) - gpio: gpiolib: Allow GPIO IRQs to lazy disable - HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle * soc/amd/renoir: detect dmic from acpi table (LP: #1887734) - ASoC: amd: add logic to check dmic hardware runtime - ASoC: amd: add ACPI dependency check - ASoC: amd: fixed kernel warnings * [SRU][PATCH 0/1][oem-5.6] fix amd RENOIR screen backlight issue. (LP: #1886785) - Revert "drm/amd/display: disable dcn20 abm feature for bring up" * Enable Quectel EG95 LTE modem [2c7c:0195] (LP: #1886744) - net: usb: qmi_wwan: add support for Quectel EG95 LTE modem - USB: serial: option: add Quectel EG95 LTE modem * soc/amd/renoir: change the module name to make it work with ucm3 (LP: #1888166) - AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module - remove a kernel module since its name is changed * System stops responding while entering S3 with SD card installed (LP: #1880519) - xhci: Return if xHCI doesn't support LPM - xhci: Poll for U0 after disabling USB2 LPM * [SRU][F/OEM-5.6] add a new OLED panel support for brightness control (LP: #1887909) - drm/dp: Lenovo X13 Yoga OLED panel brightness fix -- Timo Aaltonen Wed, 29 Jul 2020 21:08:56 +0300 ** Changed in: linux-oem-5.6 (Ubuntu Focal) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1886860 Title: cgroup refcount is bogus when cgroup_sk_alloc is disabled Status in linux package in Ubuntu: Invalid Status in linux-oem-5.6 package in Ubuntu: New Status in linux source package in Bionic: Fix Committed Status in linux-oem-5.6 source package in Bionic: Invalid Status in linux source package in Eoan: Fix Committed Status in linux-oem-5.6 source package in Eoan: Invalid Status in linux source package in Focal: Fix Committed Status in linux-oem-5.6 source package in Focal: Fix Released Status in linux source package in Groovy: Invalid Status in linux-oem-5.6 source package in Groovy: New Bug description: [Impact] When net_prio and net_cls cgroups are used, cgroup refcount is bogus, as it's not incremented anymore, but decremented when sockets are closed. This might lead to crashes possibly because of use-after-free when packets are received as shown in LP #1886668. [Test case] Ran reproducer from comment #2. [Regression potential] We could break the use of cgroup bpf. The use of cgroup bpf looks to still be working from the reproducer. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1886860/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1886785] Re: [SRU][PATCH 0/1][oem-5.6] fix amd RENOIR screen backlight issue.
This bug was fixed in the package linux-oem-5.6 - 5.6.0-1021.21 --- linux-oem-5.6 (5.6.0-1021.21) focal; urgency=medium * focal/linux-oem-5.6: 5.6.0-1021.21 -proposed tracker (LP: #1889371) * Fix right speaker of HP laptop (LP: #1889375) - SAUCE: hda/realtek: Fix right speaker of HP laptop * blk_update_request error when mount nvme partition (LP: #1872383) - SAUCE: nvme-pci: prevent SK hynix PC400 from using Write Zeroes command * cgroup refcount is bogus when cgroup_sk_alloc is disabled (LP: #1886860) - cgroup: fix cgroup_sk_alloc() for sk_clone_lock() - cgroup: Fix sock_cgroup_data on big-endian. * Add support for Atlantic NIC firmware v4 (LP: #1886908) - net: atlantic: simplify hw_get_fw_version() usage - net: atlantic: align return value of ver_match function with function name - net: atlantic: add support for FW 4.x * Restart the machine successfully after suspend (LP: #1888375) - SAUCE: iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu - iommu/vt-d: Don't apply gfx quirks to untrusted devices * Wakeup the system by touching the touchpad (LP: #1888331) - gpio: gpiolib: Allow GPIO IRQs to lazy disable - HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle * soc/amd/renoir: detect dmic from acpi table (LP: #1887734) - ASoC: amd: add logic to check dmic hardware runtime - ASoC: amd: add ACPI dependency check - ASoC: amd: fixed kernel warnings * [SRU][PATCH 0/1][oem-5.6] fix amd RENOIR screen backlight issue. (LP: #1886785) - Revert "drm/amd/display: disable dcn20 abm feature for bring up" * Enable Quectel EG95 LTE modem [2c7c:0195] (LP: #1886744) - net: usb: qmi_wwan: add support for Quectel EG95 LTE modem - USB: serial: option: add Quectel EG95 LTE modem * soc/amd/renoir: change the module name to make it work with ucm3 (LP: #1888166) - AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module - remove a kernel module since its name is changed * System stops responding while entering S3 with SD card installed (LP: #1880519) - xhci: Return if xHCI doesn't support LPM - xhci: Poll for U0 after disabling USB2 LPM * [SRU][F/OEM-5.6] add a new OLED panel support for brightness control (LP: #1887909) - drm/dp: Lenovo X13 Yoga OLED panel brightness fix -- Timo Aaltonen Wed, 29 Jul 2020 21:08:56 +0300 ** Changed in: linux-oem-5.6 (Ubuntu Focal) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1886785 Title: [SRU][PATCH 0/1][oem-5.6] fix amd RENOIR screen backlight issue. Status in HWE Next: New Status in linux-oem-5.6 package in Ubuntu: Incomplete Status in linux-oem-5.6 source package in Focal: Fix Released Bug description: [Impact] On AMD RENOIR gpu, after S3 backlight brightness can not be changed. [Fix] Pevious patch prevent loading iram, then dmcu can not work. Remove unused check to load iram right. Then backlight works well. [Test] Verified on hardware, after 10 times of S3, backlight can be changed by hotkey. [Regression Potential] Low Upstream fix, backports is minimal. RENOIR is only supported on oem-5.6, no focal patch. Harry Wentland (1): Revert "drm/amd/display: disable dcn20 abm feature for bring up" drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 11 --- 1 file changed, 4 insertions(+), 7 deletions(-) To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1886785/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1886744] Re: Enable Quectel EG95 LTE modem [2c7c:0195]
This bug was fixed in the package linux-oem-5.6 - 5.6.0-1021.21 --- linux-oem-5.6 (5.6.0-1021.21) focal; urgency=medium * focal/linux-oem-5.6: 5.6.0-1021.21 -proposed tracker (LP: #1889371) * Fix right speaker of HP laptop (LP: #1889375) - SAUCE: hda/realtek: Fix right speaker of HP laptop * blk_update_request error when mount nvme partition (LP: #1872383) - SAUCE: nvme-pci: prevent SK hynix PC400 from using Write Zeroes command * cgroup refcount is bogus when cgroup_sk_alloc is disabled (LP: #1886860) - cgroup: fix cgroup_sk_alloc() for sk_clone_lock() - cgroup: Fix sock_cgroup_data on big-endian. * Add support for Atlantic NIC firmware v4 (LP: #1886908) - net: atlantic: simplify hw_get_fw_version() usage - net: atlantic: align return value of ver_match function with function name - net: atlantic: add support for FW 4.x * Restart the machine successfully after suspend (LP: #1888375) - SAUCE: iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu - iommu/vt-d: Don't apply gfx quirks to untrusted devices * Wakeup the system by touching the touchpad (LP: #1888331) - gpio: gpiolib: Allow GPIO IRQs to lazy disable - HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle * soc/amd/renoir: detect dmic from acpi table (LP: #1887734) - ASoC: amd: add logic to check dmic hardware runtime - ASoC: amd: add ACPI dependency check - ASoC: amd: fixed kernel warnings * [SRU][PATCH 0/1][oem-5.6] fix amd RENOIR screen backlight issue. (LP: #1886785) - Revert "drm/amd/display: disable dcn20 abm feature for bring up" * Enable Quectel EG95 LTE modem [2c7c:0195] (LP: #1886744) - net: usb: qmi_wwan: add support for Quectel EG95 LTE modem - USB: serial: option: add Quectel EG95 LTE modem * soc/amd/renoir: change the module name to make it work with ucm3 (LP: #1888166) - AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module - remove a kernel module since its name is changed * System stops responding while entering S3 with SD card installed (LP: #1880519) - xhci: Return if xHCI doesn't support LPM - xhci: Poll for U0 after disabling USB2 LPM * [SRU][F/OEM-5.6] add a new OLED panel support for brightness control (LP: #1887909) - drm/dp: Lenovo X13 Yoga OLED panel brightness fix -- Timo Aaltonen Wed, 29 Jul 2020 21:08:56 +0300 ** Changed in: linux-oem-5.6 (Ubuntu Focal) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1886744 Title: Enable Quectel EG95 LTE modem [2c7c:0195] Status in HWE Next: New Status in linux package in Ubuntu: In Progress Status in linux-oem-5.6 package in Ubuntu: Invalid Status in linux source package in Bionic: Fix Committed Status in linux source package in Eoan: Fix Committed Status in linux source package in Focal: Fix Committed Status in linux-oem-5.6 source package in Focal: Fix Released Status in linux source package in Groovy: In Progress Bug description: [Impact] No modems were found by `mmcli -L` [Fix] Below 2 commits are required to enable this chip. https://lkml.org/lkml/2020/7/7/200 https://lkml.org/lkml/2020/7/7/199 [Test] Verified on the machine with EG95 LTE modem [Regression Potential] Low, just adding IDs. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1886744/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1880519] Re: System stops responding while entering S3 with SD card installed
This bug was fixed in the package linux-oem-5.6 - 5.6.0-1021.21 --- linux-oem-5.6 (5.6.0-1021.21) focal; urgency=medium * focal/linux-oem-5.6: 5.6.0-1021.21 -proposed tracker (LP: #1889371) * Fix right speaker of HP laptop (LP: #1889375) - SAUCE: hda/realtek: Fix right speaker of HP laptop * blk_update_request error when mount nvme partition (LP: #1872383) - SAUCE: nvme-pci: prevent SK hynix PC400 from using Write Zeroes command * cgroup refcount is bogus when cgroup_sk_alloc is disabled (LP: #1886860) - cgroup: fix cgroup_sk_alloc() for sk_clone_lock() - cgroup: Fix sock_cgroup_data on big-endian. * Add support for Atlantic NIC firmware v4 (LP: #1886908) - net: atlantic: simplify hw_get_fw_version() usage - net: atlantic: align return value of ver_match function with function name - net: atlantic: add support for FW 4.x * Restart the machine successfully after suspend (LP: #1888375) - SAUCE: iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu - iommu/vt-d: Don't apply gfx quirks to untrusted devices * Wakeup the system by touching the touchpad (LP: #1888331) - gpio: gpiolib: Allow GPIO IRQs to lazy disable - HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle * soc/amd/renoir: detect dmic from acpi table (LP: #1887734) - ASoC: amd: add logic to check dmic hardware runtime - ASoC: amd: add ACPI dependency check - ASoC: amd: fixed kernel warnings * [SRU][PATCH 0/1][oem-5.6] fix amd RENOIR screen backlight issue. (LP: #1886785) - Revert "drm/amd/display: disable dcn20 abm feature for bring up" * Enable Quectel EG95 LTE modem [2c7c:0195] (LP: #1886744) - net: usb: qmi_wwan: add support for Quectel EG95 LTE modem - USB: serial: option: add Quectel EG95 LTE modem * soc/amd/renoir: change the module name to make it work with ucm3 (LP: #1888166) - AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module - remove a kernel module since its name is changed * System stops responding while entering S3 with SD card installed (LP: #1880519) - xhci: Return if xHCI doesn't support LPM - xhci: Poll for U0 after disabling USB2 LPM * [SRU][F/OEM-5.6] add a new OLED panel support for brightness control (LP: #1887909) - drm/dp: Lenovo X13 Yoga OLED panel brightness fix -- Timo Aaltonen Wed, 29 Jul 2020 21:08:56 +0300 ** Changed in: linux-oem-5.6 (Ubuntu Focal) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1880519 Title: System stops responding while entering S3 with SD card installed Status in HWE Next: New Status in linux package in Ubuntu: Triaged Status in linux-oem package in Ubuntu: Invalid Status in linux-oem-5.6 package in Ubuntu: Invalid Status in linux-oem-osp1 package in Ubuntu: Invalid Status in linux source package in Bionic: Fix Committed Status in linux-oem source package in Bionic: In Progress Status in linux-oem-5.6 source package in Bionic: Invalid Status in linux-oem-osp1 source package in Bionic: Fix Committed Status in linux source package in Eoan: Won't Fix Status in linux-oem source package in Eoan: Invalid Status in linux-oem-5.6 source package in Eoan: Invalid Status in linux-oem-osp1 source package in Eoan: Invalid Status in linux source package in Focal: Fix Committed Status in linux-oem source package in Focal: Invalid Status in linux-oem-5.6 source package in Focal: Fix Released Status in linux-oem-osp1 source package in Focal: Invalid Status in linux source package in Groovy: Triaged Status in linux-oem source package in Groovy: Invalid Status in linux-oem-5.6 source package in Groovy: Invalid Status in linux-oem-osp1 source package in Groovy: Invalid Bug description: [SRU Justfication] [Impact] The system stops responding while entering S3, screen will be lit up if touchpad is triggered by finger. Cursor could be seen with black background, but system is not responding to any input. [Fix] b3d71abd135e xhci: Poll for U0 after disabling USB2 LPM f0c472a6da51 xhci: Return if xHCI doesn't support LPM [Fix] Patchset[1] for fix this issue currently landed in upstream, so we backported them: [1]:
[Kernel-packages] [Bug 1887909] Re: [SRU][F/OEM-5.6] add a new OLED panel support for brightness control
This bug was fixed in the package linux-oem-5.6 - 5.6.0-1021.21 --- linux-oem-5.6 (5.6.0-1021.21) focal; urgency=medium * focal/linux-oem-5.6: 5.6.0-1021.21 -proposed tracker (LP: #1889371) * Fix right speaker of HP laptop (LP: #1889375) - SAUCE: hda/realtek: Fix right speaker of HP laptop * blk_update_request error when mount nvme partition (LP: #1872383) - SAUCE: nvme-pci: prevent SK hynix PC400 from using Write Zeroes command * cgroup refcount is bogus when cgroup_sk_alloc is disabled (LP: #1886860) - cgroup: fix cgroup_sk_alloc() for sk_clone_lock() - cgroup: Fix sock_cgroup_data on big-endian. * Add support for Atlantic NIC firmware v4 (LP: #1886908) - net: atlantic: simplify hw_get_fw_version() usage - net: atlantic: align return value of ver_match function with function name - net: atlantic: add support for FW 4.x * Restart the machine successfully after suspend (LP: #1888375) - SAUCE: iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu - iommu/vt-d: Don't apply gfx quirks to untrusted devices * Wakeup the system by touching the touchpad (LP: #1888331) - gpio: gpiolib: Allow GPIO IRQs to lazy disable - HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle * soc/amd/renoir: detect dmic from acpi table (LP: #1887734) - ASoC: amd: add logic to check dmic hardware runtime - ASoC: amd: add ACPI dependency check - ASoC: amd: fixed kernel warnings * [SRU][PATCH 0/1][oem-5.6] fix amd RENOIR screen backlight issue. (LP: #1886785) - Revert "drm/amd/display: disable dcn20 abm feature for bring up" * Enable Quectel EG95 LTE modem [2c7c:0195] (LP: #1886744) - net: usb: qmi_wwan: add support for Quectel EG95 LTE modem - USB: serial: option: add Quectel EG95 LTE modem * soc/amd/renoir: change the module name to make it work with ucm3 (LP: #1888166) - AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module - remove a kernel module since its name is changed * System stops responding while entering S3 with SD card installed (LP: #1880519) - xhci: Return if xHCI doesn't support LPM - xhci: Poll for U0 after disabling USB2 LPM * [SRU][F/OEM-5.6] add a new OLED panel support for brightness control (LP: #1887909) - drm/dp: Lenovo X13 Yoga OLED panel brightness fix -- Timo Aaltonen Wed, 29 Jul 2020 21:08:56 +0300 ** Changed in: linux-oem-5.6 (Ubuntu Focal) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1887909 Title: [SRU][F/OEM-5.6] add a new OLED panel support for brightness control Status in linux package in Ubuntu: Triaged Status in linux-oem-5.6 package in Ubuntu: New Status in linux source package in Focal: Triaged Status in linux-oem-5.6 source package in Focal: Fix Released Bug description: [Impact] Lenovo reported that a new OLED panel needs dpcd support to change screen brightness. [Fix] Add the panel ID in quirk list to support dpcd control. [Test] Verified on hardware by Lenovo. [Regression Potential] Low Upstream fix, clean cherry-picked. Add an ID only affected on specific hw. Unstable branch already got this patch. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1887909/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1887734] Re: soc/amd/renoir: detect dmic from acpi table
This bug was fixed in the package linux-oem-5.6 - 5.6.0-1021.21 --- linux-oem-5.6 (5.6.0-1021.21) focal; urgency=medium * focal/linux-oem-5.6: 5.6.0-1021.21 -proposed tracker (LP: #1889371) * Fix right speaker of HP laptop (LP: #1889375) - SAUCE: hda/realtek: Fix right speaker of HP laptop * blk_update_request error when mount nvme partition (LP: #1872383) - SAUCE: nvme-pci: prevent SK hynix PC400 from using Write Zeroes command * cgroup refcount is bogus when cgroup_sk_alloc is disabled (LP: #1886860) - cgroup: fix cgroup_sk_alloc() for sk_clone_lock() - cgroup: Fix sock_cgroup_data on big-endian. * Add support for Atlantic NIC firmware v4 (LP: #1886908) - net: atlantic: simplify hw_get_fw_version() usage - net: atlantic: align return value of ver_match function with function name - net: atlantic: add support for FW 4.x * Restart the machine successfully after suspend (LP: #1888375) - SAUCE: iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu - iommu/vt-d: Don't apply gfx quirks to untrusted devices * Wakeup the system by touching the touchpad (LP: #1888331) - gpio: gpiolib: Allow GPIO IRQs to lazy disable - HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle * soc/amd/renoir: detect dmic from acpi table (LP: #1887734) - ASoC: amd: add logic to check dmic hardware runtime - ASoC: amd: add ACPI dependency check - ASoC: amd: fixed kernel warnings * [SRU][PATCH 0/1][oem-5.6] fix amd RENOIR screen backlight issue. (LP: #1886785) - Revert "drm/amd/display: disable dcn20 abm feature for bring up" * Enable Quectel EG95 LTE modem [2c7c:0195] (LP: #1886744) - net: usb: qmi_wwan: add support for Quectel EG95 LTE modem - USB: serial: option: add Quectel EG95 LTE modem * soc/amd/renoir: change the module name to make it work with ucm3 (LP: #1888166) - AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module - remove a kernel module since its name is changed * System stops responding while entering S3 with SD card installed (LP: #1880519) - xhci: Return if xHCI doesn't support LPM - xhci: Poll for U0 after disabling USB2 LPM * [SRU][F/OEM-5.6] add a new OLED panel support for brightness control (LP: #1887909) - drm/dp: Lenovo X13 Yoga OLED panel brightness fix -- Timo Aaltonen Wed, 29 Jul 2020 21:08:56 +0300 ** Changed in: linux-oem-5.6 (Ubuntu Focal) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1887734 Title: soc/amd/renoir: detect dmic from acpi table Status in HWE Next: New Status in linux package in Ubuntu: Fix Committed Status in linux-oem-5.6 package in Ubuntu: Invalid Status in linux source package in Focal: Fix Committed Status in linux-oem-5.6 source package in Focal: Fix Released Status in linux source package in Groovy: Fix Committed Bug description: Groovy kernel already merged the patchset [Impact] On the amd renoir machines, there is possibility that they have no dmic from the hardware desgin, but the driver register a dmic unconditionally, to avoid it, add the dmic detection code in the driver. [Fix] Backport 3 patches from upstream. [Test Case] On the 3 Lenovo ADM renoir machines, boot the kernel with this patchset, all dmic could be detected and registered as before. Disable the dmic in the BIOS, the driver can't detect the dmic and the dmic is not registered in the driver. [Regression Risk] Low, this SRU are only specific to soc/amd/renoir, and we already tested on 3 lenovo machines, they worked as expected. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1887734/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1889375] Re: Fix right speaker of HP laptop
This bug was fixed in the package linux-oem-5.6 - 5.6.0-1021.21 --- linux-oem-5.6 (5.6.0-1021.21) focal; urgency=medium * focal/linux-oem-5.6: 5.6.0-1021.21 -proposed tracker (LP: #1889371) * Fix right speaker of HP laptop (LP: #1889375) - SAUCE: hda/realtek: Fix right speaker of HP laptop * blk_update_request error when mount nvme partition (LP: #1872383) - SAUCE: nvme-pci: prevent SK hynix PC400 from using Write Zeroes command * cgroup refcount is bogus when cgroup_sk_alloc is disabled (LP: #1886860) - cgroup: fix cgroup_sk_alloc() for sk_clone_lock() - cgroup: Fix sock_cgroup_data on big-endian. * Add support for Atlantic NIC firmware v4 (LP: #1886908) - net: atlantic: simplify hw_get_fw_version() usage - net: atlantic: align return value of ver_match function with function name - net: atlantic: add support for FW 4.x * Restart the machine successfully after suspend (LP: #1888375) - SAUCE: iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu - iommu/vt-d: Don't apply gfx quirks to untrusted devices * Wakeup the system by touching the touchpad (LP: #1888331) - gpio: gpiolib: Allow GPIO IRQs to lazy disable - HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle * soc/amd/renoir: detect dmic from acpi table (LP: #1887734) - ASoC: amd: add logic to check dmic hardware runtime - ASoC: amd: add ACPI dependency check - ASoC: amd: fixed kernel warnings * [SRU][PATCH 0/1][oem-5.6] fix amd RENOIR screen backlight issue. (LP: #1886785) - Revert "drm/amd/display: disable dcn20 abm feature for bring up" * Enable Quectel EG95 LTE modem [2c7c:0195] (LP: #1886744) - net: usb: qmi_wwan: add support for Quectel EG95 LTE modem - USB: serial: option: add Quectel EG95 LTE modem * soc/amd/renoir: change the module name to make it work with ucm3 (LP: #1888166) - AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module - remove a kernel module since its name is changed * System stops responding while entering S3 with SD card installed (LP: #1880519) - xhci: Return if xHCI doesn't support LPM - xhci: Poll for U0 after disabling USB2 LPM * [SRU][F/OEM-5.6] add a new OLED panel support for brightness control (LP: #1887909) - drm/dp: Lenovo X13 Yoga OLED panel brightness fix -- Timo Aaltonen Wed, 29 Jul 2020 21:08:56 +0300 ** Changed in: linux-oem-5.6 (Ubuntu Focal) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1889375 Title: Fix right speaker of HP laptop Status in HWE Next: New Status in linux package in Ubuntu: Confirmed Status in linux-oem-5.6 package in Ubuntu: Confirmed Status in linux source package in Focal: Fix Committed Status in linux-oem-5.6 source package in Focal: Fix Released Bug description: [Impact] Right speaker on an HP laptop doesn't work. [Fix] Correctly enable the AMP to drive the right speaker. [Test] Open Gnome Control Center to test the right channel. I can hear the "front right" voice from the right speaker. [Regression Potential] Low. It's only affect a platform which is not on the market yet. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1889375/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1888166] Re: soc/amd/renoir: change the module name to make it work with ucm3
This bug was fixed in the package linux-oem-5.6 - 5.6.0-1021.21 --- linux-oem-5.6 (5.6.0-1021.21) focal; urgency=medium * focal/linux-oem-5.6: 5.6.0-1021.21 -proposed tracker (LP: #1889371) * Fix right speaker of HP laptop (LP: #1889375) - SAUCE: hda/realtek: Fix right speaker of HP laptop * blk_update_request error when mount nvme partition (LP: #1872383) - SAUCE: nvme-pci: prevent SK hynix PC400 from using Write Zeroes command * cgroup refcount is bogus when cgroup_sk_alloc is disabled (LP: #1886860) - cgroup: fix cgroup_sk_alloc() for sk_clone_lock() - cgroup: Fix sock_cgroup_data on big-endian. * Add support for Atlantic NIC firmware v4 (LP: #1886908) - net: atlantic: simplify hw_get_fw_version() usage - net: atlantic: align return value of ver_match function with function name - net: atlantic: add support for FW 4.x * Restart the machine successfully after suspend (LP: #1888375) - SAUCE: iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu - iommu/vt-d: Don't apply gfx quirks to untrusted devices * Wakeup the system by touching the touchpad (LP: #1888331) - gpio: gpiolib: Allow GPIO IRQs to lazy disable - HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle * soc/amd/renoir: detect dmic from acpi table (LP: #1887734) - ASoC: amd: add logic to check dmic hardware runtime - ASoC: amd: add ACPI dependency check - ASoC: amd: fixed kernel warnings * [SRU][PATCH 0/1][oem-5.6] fix amd RENOIR screen backlight issue. (LP: #1886785) - Revert "drm/amd/display: disable dcn20 abm feature for bring up" * Enable Quectel EG95 LTE modem [2c7c:0195] (LP: #1886744) - net: usb: qmi_wwan: add support for Quectel EG95 LTE modem - USB: serial: option: add Quectel EG95 LTE modem * soc/amd/renoir: change the module name to make it work with ucm3 (LP: #1888166) - AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module - remove a kernel module since its name is changed * System stops responding while entering S3 with SD card installed (LP: #1880519) - xhci: Return if xHCI doesn't support LPM - xhci: Poll for U0 after disabling USB2 LPM * [SRU][F/OEM-5.6] add a new OLED panel support for brightness control (LP: #1887909) - drm/dp: Lenovo X13 Yoga OLED panel brightness fix -- Timo Aaltonen Wed, 29 Jul 2020 21:08:56 +0300 ** Changed in: linux-oem-5.6 (Ubuntu Focal) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1888166 Title: soc/amd/renoir: change the module name to make it work with ucm3 Status in HWE Next: New Status in linux package in Ubuntu: Incomplete Status in linux-oem-5.6 package in Ubuntu: New Status in linux source package in Focal: Fix Committed Status in linux-oem-5.6 source package in Focal: Fix Released Bug description: [Impact] the alsa upstream worte the ucm3 files for amd renoir audio, but to load the ucm3, it depends on the kernel module name, and the upstream ucm3 needs the name snd-xxx, so we need to backport the patch from mainline kernel to change the kernel module name to meet ucm3 requirement. [Fix] Backport 1 patch from upstream. [Test Case] boot the kernel with the patch on amd renoir machines (lenovo machines), the audio driver works well (via command line like aplay or areord), then upgrade the alsa-lib and alsa-ucm-conf to 1.2.3.2, now we could see the audio devices from gnome, and they work well. [Regression Risk] Low, this SRU are only specific to soc/amd/renoir, and we already tested on 2 lenovo machines, their audio worked as before. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1888166/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1888331] Re: Wakeup the system by touching the touchpad
This bug was fixed in the package linux-oem-5.6 - 5.6.0-1021.21 --- linux-oem-5.6 (5.6.0-1021.21) focal; urgency=medium * focal/linux-oem-5.6: 5.6.0-1021.21 -proposed tracker (LP: #1889371) * Fix right speaker of HP laptop (LP: #1889375) - SAUCE: hda/realtek: Fix right speaker of HP laptop * blk_update_request error when mount nvme partition (LP: #1872383) - SAUCE: nvme-pci: prevent SK hynix PC400 from using Write Zeroes command * cgroup refcount is bogus when cgroup_sk_alloc is disabled (LP: #1886860) - cgroup: fix cgroup_sk_alloc() for sk_clone_lock() - cgroup: Fix sock_cgroup_data on big-endian. * Add support for Atlantic NIC firmware v4 (LP: #1886908) - net: atlantic: simplify hw_get_fw_version() usage - net: atlantic: align return value of ver_match function with function name - net: atlantic: add support for FW 4.x * Restart the machine successfully after suspend (LP: #1888375) - SAUCE: iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu - iommu/vt-d: Don't apply gfx quirks to untrusted devices * Wakeup the system by touching the touchpad (LP: #1888331) - gpio: gpiolib: Allow GPIO IRQs to lazy disable - HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle * soc/amd/renoir: detect dmic from acpi table (LP: #1887734) - ASoC: amd: add logic to check dmic hardware runtime - ASoC: amd: add ACPI dependency check - ASoC: amd: fixed kernel warnings * [SRU][PATCH 0/1][oem-5.6] fix amd RENOIR screen backlight issue. (LP: #1886785) - Revert "drm/amd/display: disable dcn20 abm feature for bring up" * Enable Quectel EG95 LTE modem [2c7c:0195] (LP: #1886744) - net: usb: qmi_wwan: add support for Quectel EG95 LTE modem - USB: serial: option: add Quectel EG95 LTE modem * soc/amd/renoir: change the module name to make it work with ucm3 (LP: #1888166) - AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module - remove a kernel module since its name is changed * System stops responding while entering S3 with SD card installed (LP: #1880519) - xhci: Return if xHCI doesn't support LPM - xhci: Poll for U0 after disabling USB2 LPM * [SRU][F/OEM-5.6] add a new OLED panel support for brightness control (LP: #1887909) - drm/dp: Lenovo X13 Yoga OLED panel brightness fix -- Timo Aaltonen Wed, 29 Jul 2020 21:08:56 +0300 ** Changed in: linux-oem-5.6 (Ubuntu Focal) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1888331 Title: Wakeup the system by touching the touchpad Status in HWE Next: New Status in linux-oem-5.6 package in Ubuntu: New Status in linux-oem-5.6 source package in Focal: Fix Released Bug description: [Impact] Can't wake up by touching the touchpad. [Fix] 1.gpio: With 'commit 461c1a7d4733 ("gpiolib: override irq_enable/disable")' gpiolib overrides irqchip's irq_enable and irq_disable callbacks. If irq_disable callback is implemented then genirq takes unlazy path to disable irq. Underlying irqchip may not want to implement irq_disable callback to lazy disable irq when client drivers invokes disable_irq(). By overriding irq_disable callback, gpiolib ends up always unlazy disabling IRQ. Allow gpiolib to lazy disable IRQs by overriding irq_disable callback only if irqchip implemented irq_disable. In cases where irq_disable is not implemented irq_mask is overridden. Similarly override irq_enable callback only if irqchip implemented irq_enable otherwise irq_unmask is overridden. 2. hid: Many laptops can be woken up from Suspend-to-Idle by touchpad. This is also the default behavior on other OSes. However, if touchpad and touchscreen contact to each other when lid is closed, wakeup events can be triggered inadventertly. So let's disable the wakeup by default, but enable the wakeup capability so users can enable it at their own discretion. [test] With the patch and manually enable HID's power/wakeup, the system can wake up by touching the touchpad. [Regression Potential] Low. The two patches are already landed in the upstream. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1888331/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1888375] Re: Restart the machine successfully after suspend
This bug was fixed in the package linux-oem-5.6 - 5.6.0-1021.21 --- linux-oem-5.6 (5.6.0-1021.21) focal; urgency=medium * focal/linux-oem-5.6: 5.6.0-1021.21 -proposed tracker (LP: #1889371) * Fix right speaker of HP laptop (LP: #1889375) - SAUCE: hda/realtek: Fix right speaker of HP laptop * blk_update_request error when mount nvme partition (LP: #1872383) - SAUCE: nvme-pci: prevent SK hynix PC400 from using Write Zeroes command * cgroup refcount is bogus when cgroup_sk_alloc is disabled (LP: #1886860) - cgroup: fix cgroup_sk_alloc() for sk_clone_lock() - cgroup: Fix sock_cgroup_data on big-endian. * Add support for Atlantic NIC firmware v4 (LP: #1886908) - net: atlantic: simplify hw_get_fw_version() usage - net: atlantic: align return value of ver_match function with function name - net: atlantic: add support for FW 4.x * Restart the machine successfully after suspend (LP: #1888375) - SAUCE: iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu - iommu/vt-d: Don't apply gfx quirks to untrusted devices * Wakeup the system by touching the touchpad (LP: #1888331) - gpio: gpiolib: Allow GPIO IRQs to lazy disable - HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle * soc/amd/renoir: detect dmic from acpi table (LP: #1887734) - ASoC: amd: add logic to check dmic hardware runtime - ASoC: amd: add ACPI dependency check - ASoC: amd: fixed kernel warnings * [SRU][PATCH 0/1][oem-5.6] fix amd RENOIR screen backlight issue. (LP: #1886785) - Revert "drm/amd/display: disable dcn20 abm feature for bring up" * Enable Quectel EG95 LTE modem [2c7c:0195] (LP: #1886744) - net: usb: qmi_wwan: add support for Quectel EG95 LTE modem - USB: serial: option: add Quectel EG95 LTE modem * soc/amd/renoir: change the module name to make it work with ucm3 (LP: #1888166) - AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module - remove a kernel module since its name is changed * System stops responding while entering S3 with SD card installed (LP: #1880519) - xhci: Return if xHCI doesn't support LPM - xhci: Poll for U0 after disabling USB2 LPM * [SRU][F/OEM-5.6] add a new OLED panel support for brightness control (LP: #1887909) - drm/dp: Lenovo X13 Yoga OLED panel brightness fix -- Timo Aaltonen Wed, 29 Jul 2020 21:08:56 +0300 ** Changed in: linux-oem-5.6 (Ubuntu Focal) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1888375 Title: Restart the machine successfully after suspend Status in HWE Next: New Status in linux-oem-5.6 package in Ubuntu: New Status in linux-oem-5.6 source package in Focal: Fix Released Bug description: [Impact] After suspend then restart, the System would hang during shutdown. [Fix] The commit has pushed to upstream but still wait for the maintainer of IOMMU to apply. https://lore.kernel.org/linux-iommu/20200721001713.24282-1-baolu...@linux.intel.com/ Skip the TE disabling for the quirky gfx dedicated iommu and the system would not hang during shutdown. [test] With the patch, the machine restart successfully. [Regression Potential] low, the patch just skip the TE disabling and wouldn't affect the normal usage. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1888375/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1890913] Re: init is using 100% of processor
Systemd since then migrated and probably we don't want to have the kernel migrated as well to trigger the issue, thus I've added the block- proposed tag. ** Tags added: block-proposed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1890913 Title: init is using 100% of processor Status in linux package in Ubuntu: Incomplete Bug description: the `sbin/init splash` process is using more than 100% of processor after boot. ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: systemd 246-2ubuntu1 ProcVersionSignature: Ubuntu 5.8.0-12.13-generic 5.8.0-rc7 Uname: Linux 5.8.0-12-generic x86_64 ApportVersion: 2.20.11-0ubuntu44 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME CurrentDmesg: Error: command ['dmesg'] failed with exit code 1: dmesg: read kernel buffer failed: Operation not permitted Date: Sat Aug 8 22:14:37 2020 InstallationDate: Installed on 2019-11-01 (280 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: LENOVO 2349KEG ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.8.0-12-generic root=/dev/mapper/vgubuntu-root ro i915.fastboot=1 quiet splash vt.handoff=7 SourcePackage: systemd SystemdDelta: [EXTENDED] /usr/lib/systemd/system/rc-local.service → /usr/lib/systemd/system/rc-local.service.d/debian.conf [EXTENDED] /usr/lib/systemd/system/user@.service → /usr/lib/systemd/system/user@.service.d/timeout.conf 2 overridden configuration files found. SystemdFailedUnits: Error: command ['systemctl', 'status', '--full', '●'] failed with exit code 4: Invalid unit name "●" escaped as "\xe2\x97\x8f" (maybe you should use systemd-escape?). Unit \xe2\x97\x8f.service could not be found. UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/07/2019 dmi.bios.release: 2.82 dmi.bios.vendor: LENOVO dmi.bios.version: G1ETC2WW (2.82 ) dmi.board.asset.tag: Not Available dmi.board.name: 2349KEG dmi.board.vendor: LENOVO dmi.board.version: Win8 Pro DPK TPG dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.ec.firmware.release: 1.14 dmi.modalias: dmi:bvnLENOVO:bvrG1ETC2WW(2.82):bd08/07/2019:br2.82:efr1.14:svnLENOVO:pn2349KEG:pvrThinkPadT430:rvnLENOVO:rn2349KEG:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.family: ThinkPad T430 dmi.product.name: 2349KEG dmi.product.sku: LENOVO_MT_2349 dmi.product.version: ThinkPad T430 dmi.sys.vendor: LENOVO modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-08-08T22:11:41.151132 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1890913/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 998143] Re: em28xx incorrectly sets Terratec Grabster AV350MX resulting in no sound - Workaround provided
Hello. Maybe following is helpful information. I also have a Grabster AV 350 MX. I used this 350 yesterday for the first time under Linux "ubuntu 16.04 LTS" (Kernel version: oliver:~$ uname -srm Linux 4.4.0-186-generic x86_64). And the grabbing of a 30 second clip (until now I was not able to grab longer videos) is working with mencoder: oliver:~$ mencoder MEncoder 1.2.1 (Debian), built with gcc-5.4.0 (C) 2000-2016 MPlayer Team Without using the in the above "Bug Description" stated WORKAROUND. And both video and audio are OK. For details, I would ask you to see https://forum.ubuntuusers.de/topic /video-grabber-terratec-grabster-av-350-ohne-to/#post-9179871 Regards Oliver. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/998143 Title: em28xx incorrectly sets Terratec Grabster AV350MX resulting in no sound - Workaround provided Status in linux package in Ubuntu: Incomplete Bug description: When using Ubuntu 12.04, 64bit, kernel 3.2.0-24 with my Terratec Grabster AV350MX plugged into USB, the wrong settings are applied, allowing only a video picture with no sound via mplayer, vlc, and arecord. I verified that the error still exists in kernel 3.4.0-rc6. WORKAROUND: Insert Grabster and leave inserted. Execute at a terminal: sudo rmmod em28xx sudo modprobe em28xx card=67 Now enjoy video with sound with (PAL video, video on /dev/video0, sound on alsa hw:1,0): mplayer tv:// -tv driver=v4l2:width=720:height=576:outfmt=uyvy:device=/dev/video0:input=0:fps=25:alsa:amode=1:forcechan=2:audiorate=48000:adevice=plughw.1,0:forceaudio:immediatemode=0 -ao sdl,alsa or record to file with (1 minute of uncompressed video/sound): mencoder tv:// -tv driver=v4l2:width=720:height=576:device=/dev/video0:input=0:fps=25:alsa:amode=1:forcechan=2:audiorate=48000:adevice=plughw.1,0:forceaudio:immediatemode=0 -oac copy -ovc copy -o myvideofile -endpos 00:01:00 An insight to the work around is the Terratec Grabster AV350MX (lsusb: 0ccd:0084) is similar to the Terratec Grabby (0ccd:0096) with the same hardware chip Empia EM2860. Also, in the kernel driver file em28xx.h the former is card#68, while the latter is card#67. --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ullix 1784 F pulseaudio /dev/snd/controlC0: ullix 1784 F pulseaudio Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xee24 irq 47' Mixer name : 'Analog Devices AD1981' Components : 'HDA:11d41981,17aa2025,00100200' Controls : 20 Simple ctrls : 11 Card1.Amixer.info: Card hw:1 'G350'/'Grabster AV 350 at usb-:00:1d.7-5, high speed' Mixer name : 'USB Mixer' Components : 'USB0ccd:0084' Controls : 2 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'Line',0 Capabilities: cvolume cvolume-joined cswitch cswitch-joined penum Capture channels: Mono Limits: Capture 0 - 16 Mono: Capture 8 [50%] [0.00dB] [on] Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 79HT50WW-1.07' Mixer name : 'ThinkPad EC 79HT50WW-1.07' Components : '' Controls : 2 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 14 Mono: Playback 14 [100%] [on] DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=0be66720-b3a2-41e0-aaa3-8beeea963a64 InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) MachineType: LENOVO 1952YQB Package: linux (not installed) PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=1c88d399-ed4f-4761-bb96-765e24bb2c1a ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.2.0-24.38-generic 3.2.16 RelatedPackageVersions: linux-restricted-modules-3.2.0-24-generic N/A linux-backports-modules-3.2.0-24-generic N/A linux-firmware1.79 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Tags: precise precise Uname: Linux 3.2.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin mythtv plugdev sambashare sudo dmi.bios.date: 04/30/2007 dmi.bios.vendor: LENOVO dmi.bios.version: 79ETD3WW (2.13 ) dmi.board.name: 1952YQB dmi.board.vendor: LENOVO dmi.board.version:
[Kernel-packages] [Bug 1891461] Re: Add proper USB audio support for Lenovo ThinkStation P620
Hit LP: #1891518 so I can't upload more debdiff... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1891461 Title: Add proper USB audio support for Lenovo ThinkStation P620 Status in alsa-lib package in Ubuntu: Incomplete Status in alsa-ucm-conf package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Status in alsa-lib source package in Focal: New Status in alsa-ucm-conf source package in Focal: New Status in pulseaudio source package in Focal: New Status in alsa-lib source package in Groovy: Incomplete Status in alsa-ucm-conf source package in Groovy: Incomplete Status in pulseaudio source package in Groovy: Incomplete Bug description: [Impact] Lenovo ThinkStation P620 uses TRX4 board, which doesn't have PCI audio in its chipset. Instead, it's equipped with two USB audio devices, "Main", which is for internal speaker and front headset, and "Rear", which is for rear panel I/Os. However, both USB audio don't really work out of the box. Issues and fixes will be described together below. [Fix for alsa-lib] 1) Both USB audio devices don't have S/PDIF port, so we need to disable them: https://git.alsa-project.org/?p=alsa-lib.git;a=commit;h=464c2f8b61855cb22d61c4b232f74d6767fac5fb [Fix for alsa-ucm-conf] 2) PulseAudio doesn't assign the correct stream for "Main" device, audio output stays at "Speaker" after "Headset" is selected. So we need UCM to let PulseAudio understand correct stream assignment. In addition to that, in order to not let headset port availability invalidate speaker profile, we need two UCM profiles to separate "Speaker" and "Headset" logically: https://github.com/alsa-project/alsa-ucm-conf/pull/42 [Fix for PulseAudio] 3) USB audio devices, UAC v2 and v3, support jack detection (insertion control). However, PulseAudio doesn't monitor USB jack mixer controls, so jack detection doesn't work at userspace level. We need to let PulseAudio be aware those jacks: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/e153fb870618b1dcf65f6fce1667ea76acc5a28b 4) When a headset gets plugged, PulseAudio switches the profile from "Speaker" to "Headset" automatically. However, when headset gets unplugged, PulseAudio switch the profile from "Headset" to "HDMI", skipping the "Speaker" profile. We need to fix priorities for profiles that are created from UCM to avoid the problem: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/dd70c3c5890ce27b9ba4bd041dea4a01c3e1fc0f [Test] Under g-c-c's Sound tab, "Speaker", "Headphone", "S/PDIF", etc. profiles are all selectable. Sound comes out from speaker even if "Headphone" is chosen. Microphone is already selected though there's no microphone plugged. With the above fix all applied, open Gnome Control Center -> Sound tab. Sink "Speaker" is selected. Only "Speaker" and "HDMI" are in the drop down menu. Plug a headset to front port, "Headphone" and "Microphone" appears and automatically becomes default. Unplug the headset, sink switches back to "Speaker", and source switches to none. Plug line-in, line-out and microphone to the rear panel, jack detection works for all three ports, and they all work correctly. Unplug rear line-in, line-out or microphone makes the option in dropdown menu disappears. On other systems, nothing changed. [Regression Potential] For fix 1) and 2), The UCM in alsa-lib and alsa-ucm-conf strictly match kernel provided profile name, so no other device will be affected. For fix 3), if there are UAC v2/v3 devices claim to support jack detection but don't really support it, this will make the PulseAudio consider its availability to "no". AFAIK, the USB audios that have jack ports are mostly docking stations, which already have their own UCM profiles or PulseAudio profile-sets, so they are unaffected by this change. If we ever see this kind of regression, the proper fix is to disable jack detection from kernel side. For fix 4), if user depends on the old behavior (i.e. switch to another card while other profiles are still available), this will bring a behavioral change. However, all available profiles will still be available after the fix, so users can still be chose the preferred profile from the g-c-c dropdown menu. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1891461/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891519] [NEW] vboxdrv.ko isn't signed on Virtualbox install when MOK is assigned already on kernel 5.8.0-16.17-generic 5.8.0, groovy proposed
Public bug reported: Follow on from: [1](https://bugs.launchpad.net/ubuntu/+source/virtualbox/+bug/1884652) [2](https://bugs.launchpad.net/ubuntu/+source/virtualbox/+bug/1884652/comments/8) # cat /sys/kernel/security/lockdown none [integrity] confidentiality # bootctl status System: Firmware: n/a (n/a) Secure Boot: enabled Setup Mode: user Boot into FW: supported # xxd /lib/modules/$(uname -r)/updates/dkms/vboxdrv.ko| tail 0008ca10: 3100 3d05 0800 1...=... 0008ca20: 1800 0900 0300 0008ca30: 0008ca40: 3013 0500 68cd 0...h... 0008ca50: 0100 0008ca60: 1100 0300 0008ca70: 0008ca80: 08bc 0800 df01 0008ca90: 0100 0008caa0: # systemctl status virtualbox ● virtualbox.service - LSB: VirtualBox Linux kernel module Loaded: loaded (/etc/init.d/virtualbox; generated) Active: failed (Result: exit-code) since Thu 2020-08-13 12:58:50 UTC; 8min ago Docs: man:systemd-sysv-generator(8) Aug 13 12:58:50 kortewegdevries systemd[1]: Starting LSB: VirtualBox Linux kernel module... Aug 13 12:58:50 kortewegdevries virtualbox[6653]: * Loading VirtualBox kernel modules... Aug 13 12:58:50 kortewegdevries virtualbox[6653]: * modprobe vboxdrv failed. Please use 'dmesg' to fin> Aug 13 12:58:50 kortewegdevries virtualbox[6653]: ...fail! Aug 13 12:58:50 kortewegdevries systemd[1]: virtualbox.service: Control process exited, code=exited, st> Aug 13 12:58:50 kortewegdevries systemd[1]: virtualbox.service: Failed with result 'exit-code'. Aug 13 12:58:50 kortewegdevries systemd[1]: Failed to start LSB: VirtualBox Linux kernel module. Aug 13 12:58:50 kortewegdevries virtualbox[6653]: * Loading VirtualBox kernel modules... Aug 13 12:58:50 kortewegdevries kernel: Lockdown: modprobe: unsigned module loading is restricted; see > Aug 13 12:58:50 kortewegdevries virtualbox[6653]: * modprobe vboxdrv failed. Please use 'dmesg' to fin> Aug 13 12:58:50 kortewegdevries virtualbox[6653]: ...fail! Aug 13 12:58:50 kortewegdevries systemd[1]: virtualbox.service: Control process exited, code=exited, st> Subject: Unit process exited Defined-By: systemd Support: http://www.ubuntu.com/support An ExecStart= process belonging to unit virtualbox.service has exited. The process' exit code is 'exited' and its exit status is 1. Aug 13 12:58:50 kortewegdevries systemd[1]: virtualbox.service: Failed with result 'exit-code'. Subject: Unit failed Defined-By: systemd Support: http://www.ubuntu.com/support The unit virtualbox.service has entered the 'failed' state with result 'exit-code'. Aug 13 12:58:50 kortewegdevries systemd[1]: Failed to start LSB: VirtualBox Linux kernel module. Subject: A start job for unit virtualbox.service has failed Defined-By: systemd Support: http://www.ubuntu.com/support A start job for unit virtualbox.service has finished with a failure. The job identifier is 5769 and the job result is failed. After rebooting with the broken virtualbox install following is printed on: # journalctl -b 0|egrep -i "virt|vbox" Aug 13 13:10:48 kortewegdevries systemd[1]: vboxweb.service: Can't open PID file /run/vboxweb.pid (yet?) after start: Operation not permitted Aug 13 13:10:48 kortewegdevries systemd[1]: vboxweb.service: Failed with result 'protocol'. Aug 13 13:10:48 kortewegdevries audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=vboxweb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' Aug 13 13:10:48 kortewegdevries virtualbox[1278]: * Loading VirtualBox kernel modules... Aug 13 13:11:12 kortewegdevries virtualbox[1278]: * modprobe vboxdrv failed. Please use 'dmesg' to find out why Aug 13 13:11:12 kortewegdevries virtualbox[1278]: ...fail! Aug 13 13:11:12 kortewegdevries systemd[1]: virtualbox.service: Control process exited, code=exited, status=1/FAILURE Aug 13 13:11:12 kortewegdevries systemd[1]: virtualbox.service: Failed with result 'exit-code'. Aug 13 13:11:12 kortewegdevries audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=virtualbox comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' dkms version 2.8.3-4 Also see attached dmesg: lines 68-69,102 for secure boot; lines 696-709 where it loads two keys I signed manually at some point; lines 1106-1121 were probably after reinstalling virtualbox. MOKs assigned (696-709): https://bugs.launchpad.net/ubuntu/+source/virtualbox/+bug/1884652/+attachment/5401381/+files/dmesg Expected Outcome: Once virtualbox-dkms is installed against a kernel, the modules are signed
[Kernel-packages] [Bug 1886827] Re: Machine hangs when doing a normal reboot
Finally got 5.8-rc4 compiled with patch applied. Posting dmesg results. ** Attachment added: "dmesg.txt" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1886827/+attachment/5401384/+files/dmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1886827 Title: Machine hangs when doing a normal reboot Status in linux package in Ubuntu: Incomplete Bug description: Hi, When booting into kernel 4.15.0-99-generic or higher and also kernel 5.3.0-53-generic or higher, the system hangs when issuing the reboot command or CTRL-ALT-DEL from console with the following console messages: -- snip Reached target Final Step. Starting Reboot... < following message repeats indefinetely every 120 seconds > INFO: task systemd-shutdow:1 blocked for more than 120 seconds. Not tainted 4.15.0-99-generic #100 " echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. -- snip I did a git bisect procedure between kernels 4.15.0-96-generic and 4.15.0-99 and it reported the following: -- snip b52be79f3c6cc89bb3834c5174843e34f945f386 is the first bad commit commit b52be79f3c6cc89bb3834c5174843e34f945f386 -- snip Ubuntu version affected: Ubuntu 4.15.0-99.100-generic 4.15.18 First kernel package affected: linux-image-4.15.0-99-generic Necessary debug files will be attached as soon as possible. Quinn --- ProblemType: Bug AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jul 9 09:55 seq crw-rw 1 root audio 116, 33 Jul 9 09:55 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay': 'aplay' ApportVersion: 2.20.9-0ubuntu7.15 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord': 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 18.04 HibernationDevice: RESUME=/dev/mapper/system-swap IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig': 'iwconfig' Lsusb: Bus 001 Device 003: ID 0b38:0010 Gear Head 107-Key Keyboard Bus 001 Device 002: ID 8087:07e6 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: To be filled by O.E.M. To be filled by O.E.M. Package: linux (not installed) PciMultimedia: ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-4.15.0-99-generic root=/dev/mapper/system-root ro rootflags=subvol=@ biosdevname=0 net.ifnames=0 nomodeset "dyndbg=file drivers/base/* +p" ProcVersionSignature: Ubuntu 4.15.0-99.100-generic 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-99-generic N/A linux-backports-modules-4.15.0-99-generic N/A linux-firmware 1.173.18 RfKill: Error: [Errno 2] No such file or directory: 'rfkill': 'rfkill' Tags: bionic Uname: Linux 4.15.0-99-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip disk plugdev sudo _MarkForUpload: True dmi.bios.date: 05/05/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 5.6.5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Aptio CRB dmi.board.vendor: AMI Corporation dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr5.6.5:bd05/05/2016:svnTobefilledbyO.E.M.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnAMICorporation:rnAptioCRB:rvrTobefilledbyO.E.M.:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: To be filled by O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1886827/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891461] Re: Add proper USB audio support for Lenovo ThinkStation P620
PulseAudio debdiff for focal ** Patch added: "pulseaudio_13.99.1-1ubuntu3.6.debdiff" https://bugs.launchpad.net/ubuntu/+source/alsa-ucm-conf/+bug/1891461/+attachment/5401383/+files/pulseaudio_13.99.1-1ubuntu3.6.debdiff -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1891461 Title: Add proper USB audio support for Lenovo ThinkStation P620 Status in alsa-lib package in Ubuntu: Incomplete Status in alsa-ucm-conf package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Status in alsa-lib source package in Focal: New Status in alsa-ucm-conf source package in Focal: New Status in pulseaudio source package in Focal: New Status in alsa-lib source package in Groovy: Incomplete Status in alsa-ucm-conf source package in Groovy: Incomplete Status in pulseaudio source package in Groovy: Incomplete Bug description: [Impact] Lenovo ThinkStation P620 uses TRX4 board, which doesn't have PCI audio in its chipset. Instead, it's equipped with two USB audio devices, "Main", which is for internal speaker and front headset, and "Rear", which is for rear panel I/Os. However, both USB audio don't really work out of the box. Issues and fixes will be described together below. [Fix for alsa-lib] 1) Both USB audio devices don't have S/PDIF port, so we need to disable them: https://git.alsa-project.org/?p=alsa-lib.git;a=commit;h=464c2f8b61855cb22d61c4b232f74d6767fac5fb [Fix for alsa-ucm-conf] 2) PulseAudio doesn't assign the correct stream for "Main" device, audio output stays at "Speaker" after "Headset" is selected. So we need UCM to let PulseAudio understand correct stream assignment. In addition to that, in order to not let headset port availability invalidate speaker profile, we need two UCM profiles to separate "Speaker" and "Headset" logically: https://github.com/alsa-project/alsa-ucm-conf/pull/42 [Fix for PulseAudio] 3) USB audio devices, UAC v2 and v3, support jack detection (insertion control). However, PulseAudio doesn't monitor USB jack mixer controls, so jack detection doesn't work at userspace level. We need to let PulseAudio be aware those jacks: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/e153fb870618b1dcf65f6fce1667ea76acc5a28b 4) When a headset gets plugged, PulseAudio switches the profile from "Speaker" to "Headset" automatically. However, when headset gets unplugged, PulseAudio switch the profile from "Headset" to "HDMI", skipping the "Speaker" profile. We need to fix priorities for profiles that are created from UCM to avoid the problem: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/dd70c3c5890ce27b9ba4bd041dea4a01c3e1fc0f [Test] Under g-c-c's Sound tab, "Speaker", "Headphone", "S/PDIF", etc. profiles are all selectable. Sound comes out from speaker even if "Headphone" is chosen. Microphone is already selected though there's no microphone plugged. With the above fix all applied, open Gnome Control Center -> Sound tab. Sink "Speaker" is selected. Only "Speaker" and "HDMI" are in the drop down menu. Plug a headset to front port, "Headphone" and "Microphone" appears and automatically becomes default. Unplug the headset, sink switches back to "Speaker", and source switches to none. Plug line-in, line-out and microphone to the rear panel, jack detection works for all three ports, and they all work correctly. Unplug rear line-in, line-out or microphone makes the option in dropdown menu disappears. On other systems, nothing changed. [Regression Potential] For fix 1) and 2), The UCM in alsa-lib and alsa-ucm-conf strictly match kernel provided profile name, so no other device will be affected. For fix 3), if there are UAC v2/v3 devices claim to support jack detection but don't really support it, this will make the PulseAudio consider its availability to "no". AFAIK, the USB audios that have jack ports are mostly docking stations, which already have their own UCM profiles or PulseAudio profile-sets, so they are unaffected by this change. If we ever see this kind of regression, the proper fix is to disable jack detection from kernel side. For fix 4), if user depends on the old behavior (i.e. switch to another card while other profiles are still available), this will bring a behavioral change. However, all available profiles will still be available after the fix, so users can still be chose the preferred profile from the g-c-c dropdown menu. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1891461/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891461] Re: Add proper USB audio support for Lenovo ThinkStation P620
PulseAudio debdiff for groovy ** Description changed: - TBD + [Impact] + Lenovo ThinkStation P620 uses TRX4 board, which doesn't have PCI audio in its chipset. Instead, it's equipped with two USB audio devices, "Main", which is for internal speaker and front headset, and "Rear", which is for rear panel I/Os. + + However, both USB audio don't really work out of the box. Issues and + fixes will be described together below. + + [Fix for alsa-lib] + 1) Both USB audio devices don't have S/PDIF port, so we need to disable them: + https://git.alsa-project.org/?p=alsa-lib.git;a=commit;h=464c2f8b61855cb22d61c4b232f74d6767fac5fb + + [Fix for alsa-ucm-conf] + 2) PulseAudio doesn't assign the correct stream for "Main" device, audio output stays at "Speaker" after "Headset" is selected. So we need UCM to let PulseAudio understand correct stream assignment. + In addition to that, in order to not let headset port availability invalidate speaker profile, we need two UCM profiles to separate "Speaker" and "Headset" logically: + https://github.com/alsa-project/alsa-ucm-conf/pull/42 + + [Fix for PulseAudio] + 3) USB audio devices, UAC v2 and v3, support jack detection (insertion control). However, PulseAudio doesn't monitor USB jack mixer controls, so jack detection doesn't work at userspace level. We need to let PulseAudio be aware those jacks: + https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/e153fb870618b1dcf65f6fce1667ea76acc5a28b + + 4) When a headset gets plugged, PulseAudio switches the profile from "Speaker" to "Headset" automatically. However, when headset gets unplugged, PulseAudio switch the profile from "Headset" to "HDMI", skipping the "Speaker" profile. We need to fix priorities for profiles that are created from UCM to avoid the problem: + https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/dd70c3c5890ce27b9ba4bd041dea4a01c3e1fc0f + + [Test] + Under g-c-c's Sound tab, "Speaker", "Headphone", "S/PDIF", etc. profiles are all selectable. Sound comes out from speaker even if "Headphone" is chosen. Microphone is already selected though there's no microphone plugged. + + With the above fix all applied, open Gnome Control Center -> Sound tab. + Sink "Speaker" is selected. Only "Speaker" and "HDMI" are in the drop down menu. + Plug a headset to front port, "Headphone" and "Microphone" appears and automatically becomes default. Unplug the headset, sink switches back to "Speaker", and source switches to none. + Plug line-in, line-out and microphone to the rear panel, jack detection works for all three ports, and they all work correctly. Unplug rear line-in, line-out or microphone makes the option in dropdown menu disappears. + + On other systems, nothing changed. + + [Regression Potential] + For fix 1) and 2), The UCM in alsa-lib and alsa-ucm-conf strictly match kernel provided profile name, so no other device will be affected. + + For fix 3), if there are UAC v2/v3 devices claim to support jack detection but don't really support it, this will make the PulseAudio consider its availability to "no". + AFAIK, the USB audios that have jack ports are mostly docking stations, which already have their own UCM profiles or PulseAudio profile-sets, so they are unaffected by this change. + If we ever see this kind of regression, the proper fix is to disable jack detection from kernel side. + + For fix 4), if user depends on the old behavior (i.e. switch to another + card while other profiles are still available), this will bring a + behavioral change. However, all available profiles will still be + available after the fix, so users can still be chose the preferred + profile from the g-c-c dropdown menu. ** Patch added: "pulseaudio_13.99.1-1ubuntu9.debdiff" https://bugs.launchpad.net/ubuntu/+source/alsa-ucm-conf/+bug/1891461/+attachment/5401382/+files/pulseaudio_13.99.1-1ubuntu9.debdiff -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1891461 Title: Add proper USB audio support for Lenovo ThinkStation P620 Status in alsa-lib package in Ubuntu: Incomplete Status in alsa-ucm-conf package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Status in alsa-lib source package in Focal: New Status in alsa-ucm-conf source package in Focal: New Status in pulseaudio source package in Focal: New Status in alsa-lib source package in Groovy: Incomplete Status in alsa-ucm-conf source package in Groovy: Incomplete Status in pulseaudio source package in Groovy: Incomplete Bug description: [Impact] Lenovo ThinkStation P620 uses TRX4 board, which doesn't have PCI audio in its chipset. Instead, it's equipped with two USB audio devices, "Main", which is for internal speaker and front headset, and "Rear", which is for rear panel I/Os. However, both USB audio don't really work out of the box. Issues and fixes will be
[Kernel-packages] [Bug 1889217] Re: Make digital mic on the AMD Renoir machines work under gnome desktop
Thanks, I've uploaded the changes to groovy now. It would be nice having some confirmation it works there before SRUing to focal. One point for improvement also, the changelog have no human description of the changes which is suboptimal, especially in case of a SRU -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1889217 Title: Make digital mic on the AMD Renoir machines work under gnome desktop Status in alsa-lib package in Ubuntu: Fix Committed Status in alsa-ucm-conf package in Ubuntu: Fix Committed Status in pulseaudio package in Ubuntu: Fix Committed Status in alsa-lib source package in Focal: New Status in alsa-ucm-conf source package in Focal: New Status in pulseaudio source package in Focal: New Status in alsa-lib source package in Groovy: Fix Committed Status in alsa-ucm-conf source package in Groovy: Fix Committed Status in pulseaudio source package in Groovy: Fix Committed Bug description: [Impact] On the LENOVO AMD Renoir machines, there is a digital mic directly connected to the APU instead of the codec, so there are two separate sound cards in the system, one is for analogue codec driven by hda driver, the other is for the dmic driven by ASoC acp driver. The current audio stack (pulseaudio + alsa-ucm-conf + alsa-lib) doesn't support this design yet, it could support all audio devices on the codec well, but it doesn't support that dmic well. In the gnome-control-center, the dmic becomes two input devices: analog input and multichannel input, and users can only record sound from analog input, the multichannel input can't function at all. Besides this issue, there is another issue, after users plug an external mic, the external mic can't replace the dmic automatically, this gives users a bad experience since this behaviour is different from the other audio designs. [Fix for pulseaudio] backport 3 patches: 2 of them from upstream device-port: queue CARD CHANGE event before update default sink alsa: adjust ucm sink/source priority according to ports priority 1 of them from a merge request: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/305 [Fix for alsa-ucm-conf] backport 14 patches: 11 of them from upstream: ucm-fix-wrong-If-in-sequence-in-HiFi-dual.conf.patch ucm2-add-initial-ucm.conf-for-the-latest-alsa-lib.patch sof-hda-dsp-don-t-fail-if-Auto-Mute-control-is-not-p.patch ucm.conf-add-support-for-the-kernel-module-name-tree.patch sof-hda-dsp-make-Headphone-Playback-Switch-condition.patch sof-soundwire-initial-UCM2-version.patch sof-soundwire-cleanups-recommended-by-the-ucm-valida.patch sof-soundwire-rewrite-for-syntax-3.patch HDA-Intel-add-support-for-AMD-acp-microphone-devices.patch Fix-invalid-Regex-Type-in-various-Condition-blocks.patch hda-hdmi-add-HDMI4-HDMI5-HDMI6-devices.patch 3 of them from a merge request: https://github.com/alsa-project/alsa-ucm-conf/pull/41 [Fix for alsa-lib] backport 47 patches from upstream: Enabled-extended-namehints-in-alsa.conf.patch conf-add-snd_config_is_array-function.patch topology-use-snd_config_is_array-function.patch ucm-merge-the-array-items-from-the-condition-blocks.patch ucm-parse-SectionOnce-section-in-the-master-UCM-conf.patch ucm-execute-SectionDefaults-lately-when-the-first-ve.patch ucm-handle-set-_once-command.patch ucm-handle-set-_defaults-command.patch ucm-initialize-mgr-once_list.patch ucm-fix-SectionOnce-comment.patch ucm-fix-compilation-error-in-set_defaults_user.patch ucm-rename-SectionOnce-to-BootSequence.patch ucm-rename-_once-command-to-_boot-command.patch ucm-configuration-implement-in-place-Include.patch ucm-configuration-substitute-ConfDir-and-ConfTopDir.patch ucm-config-substitute-File-string-to-allow-variables.patch ucm-configuration-allow-to-define-the-configuration-.patch ucm-configuration-add-DefineRegex.patch ucm-substitute-arguments-in-sequences.patch ucm-allow-syntax-version-3.patch ucm-config-change-the-in-place-include-evaluation-or.patch ucm-allow-to-specify-the-toplevel-directory-using-as.patch ucm-substitute-also-value-strings.patch ucm-handle-strict-prefix-correctly-for-the-UCM-card-.patch ucm-String-condition-implement-Empty.patch ucm-Define-DefineRegex-is-supported-in-Syntax-3.patch ucm-substitute-OpenName.patch ucm-substitute-CardNumber.patch ucm-implement-the-toplevel-ucm-configuration-file-pa.patch ucm-substitute-device-modifier-names-too.patch ucm-substitute-device-strings-in-the-device-lists.patch ucm-substitute-component-sequence-string.patch ucm-substitute-verb-name-and-file-field.patch ucm-substitute-Comment-in-Transition-and-Device.patch ucm-substitute-RenameDevice-and-DeleteDevice-lists.patch ucm-substitute-arguments-in-sequences-only-for-synta.patch ucm-shuffle-code-in-compound_merge.patch
[Kernel-packages] [Bug 1889217] Re: Make digital mic on the AMD Renoir machines work under gnome desktop
I've also commited to the pulseaudio Vcs, the alsa packages don't have a Vcs -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1889217 Title: Make digital mic on the AMD Renoir machines work under gnome desktop Status in alsa-lib package in Ubuntu: Fix Committed Status in alsa-ucm-conf package in Ubuntu: Fix Committed Status in pulseaudio package in Ubuntu: Fix Committed Status in alsa-lib source package in Focal: New Status in alsa-ucm-conf source package in Focal: New Status in pulseaudio source package in Focal: New Status in alsa-lib source package in Groovy: Fix Committed Status in alsa-ucm-conf source package in Groovy: Fix Committed Status in pulseaudio source package in Groovy: Fix Committed Bug description: [Impact] On the LENOVO AMD Renoir machines, there is a digital mic directly connected to the APU instead of the codec, so there are two separate sound cards in the system, one is for analogue codec driven by hda driver, the other is for the dmic driven by ASoC acp driver. The current audio stack (pulseaudio + alsa-ucm-conf + alsa-lib) doesn't support this design yet, it could support all audio devices on the codec well, but it doesn't support that dmic well. In the gnome-control-center, the dmic becomes two input devices: analog input and multichannel input, and users can only record sound from analog input, the multichannel input can't function at all. Besides this issue, there is another issue, after users plug an external mic, the external mic can't replace the dmic automatically, this gives users a bad experience since this behaviour is different from the other audio designs. [Fix for pulseaudio] backport 3 patches: 2 of them from upstream device-port: queue CARD CHANGE event before update default sink alsa: adjust ucm sink/source priority according to ports priority 1 of them from a merge request: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/305 [Fix for alsa-ucm-conf] backport 14 patches: 11 of them from upstream: ucm-fix-wrong-If-in-sequence-in-HiFi-dual.conf.patch ucm2-add-initial-ucm.conf-for-the-latest-alsa-lib.patch sof-hda-dsp-don-t-fail-if-Auto-Mute-control-is-not-p.patch ucm.conf-add-support-for-the-kernel-module-name-tree.patch sof-hda-dsp-make-Headphone-Playback-Switch-condition.patch sof-soundwire-initial-UCM2-version.patch sof-soundwire-cleanups-recommended-by-the-ucm-valida.patch sof-soundwire-rewrite-for-syntax-3.patch HDA-Intel-add-support-for-AMD-acp-microphone-devices.patch Fix-invalid-Regex-Type-in-various-Condition-blocks.patch hda-hdmi-add-HDMI4-HDMI5-HDMI6-devices.patch 3 of them from a merge request: https://github.com/alsa-project/alsa-ucm-conf/pull/41 [Fix for alsa-lib] backport 47 patches from upstream: Enabled-extended-namehints-in-alsa.conf.patch conf-add-snd_config_is_array-function.patch topology-use-snd_config_is_array-function.patch ucm-merge-the-array-items-from-the-condition-blocks.patch ucm-parse-SectionOnce-section-in-the-master-UCM-conf.patch ucm-execute-SectionDefaults-lately-when-the-first-ve.patch ucm-handle-set-_once-command.patch ucm-handle-set-_defaults-command.patch ucm-initialize-mgr-once_list.patch ucm-fix-SectionOnce-comment.patch ucm-fix-compilation-error-in-set_defaults_user.patch ucm-rename-SectionOnce-to-BootSequence.patch ucm-rename-_once-command-to-_boot-command.patch ucm-configuration-implement-in-place-Include.patch ucm-configuration-substitute-ConfDir-and-ConfTopDir.patch ucm-config-substitute-File-string-to-allow-variables.patch ucm-configuration-allow-to-define-the-configuration-.patch ucm-configuration-add-DefineRegex.patch ucm-substitute-arguments-in-sequences.patch ucm-allow-syntax-version-3.patch ucm-config-change-the-in-place-include-evaluation-or.patch ucm-allow-to-specify-the-toplevel-directory-using-as.patch ucm-substitute-also-value-strings.patch ucm-handle-strict-prefix-correctly-for-the-UCM-card-.patch ucm-String-condition-implement-Empty.patch ucm-Define-DefineRegex-is-supported-in-Syntax-3.patch ucm-substitute-OpenName.patch ucm-substitute-CardNumber.patch ucm-implement-the-toplevel-ucm-configuration-file-pa.patch ucm-substitute-device-modifier-names-too.patch ucm-substitute-device-strings-in-the-device-lists.patch ucm-substitute-component-sequence-string.patch ucm-substitute-verb-name-and-file-field.patch ucm-substitute-Comment-in-Transition-and-Device.patch ucm-substitute-RenameDevice-and-DeleteDevice-lists.patch ucm-substitute-arguments-in-sequences-only-for-synta.patch ucm-shuffle-code-in-compound_merge.patch ucm-implement-CardIdByName-substitution.patch ucm-allow-to-ignore-errors-for-the-value-substitutio.patch ucm-allow-to-use-the-defined-variables-in-the-substi.patch
Re: [Kernel-packages] [Bug 1879334] Re: Desktop Activities - first key typed is repeated 21 times
Hi Kai-Heng, Apparently this issue was a result of installing some (apt) updates and not rebooting. When I rebooted, the problem stopped. So, some installation artifact caused it or some update should have required reboot after installation. Since I cannot repeat the problem now, I don't think it makes sense to try an older kernel. But, my sense tells me this was a problem with the Gnome Shell and not the kernel. No repeating keys were seen in any other application or use, besides the one I reported. On Tue, Aug 11, 2020 at 11:55 PM Kai-Heng Feng <1879...@bugs.launchpad.net> wrote: > Can you please try some older kernel? If it only happens in new kernels > then it's a regression. > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1879334 > > Title: > Desktop Activities - first key typed is repeated 21 times > > Status in linux package in Ubuntu: > Expired > > Bug description: > Pretty simple scenario. I often press the Super key and then start > typing a command name. Within the last two weeks (I stay up to date on > any updates to 18.04), when I press the first key it gets repeated a > total of 21 times. It is only the first key. If I press backspace or > Ctl-u to erase the entries, then there is no problem. It seems that > this problem went from being intermittent to being constant now. > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1879334/+subscriptions > -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1879334 Title: Desktop Activities - first key typed is repeated 21 times Status in linux package in Ubuntu: Expired Bug description: Pretty simple scenario. I often press the Super key and then start typing a command name. Within the last two weeks (I stay up to date on any updates to 18.04), when I press the first key it gets repeated a total of 21 times. It is only the first key. If I press backspace or Ctl-u to erase the entries, then there is no problem. It seems that this problem went from being intermittent to being constant now. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1879334/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1889217] Re: Make digital mic on the AMD Renoir machines work under gnome desktop
** Changed in: alsa-lib (Ubuntu Groovy) Status: New => Fix Committed ** Changed in: alsa-ucm-conf (Ubuntu Groovy) Status: New => Fix Committed ** Changed in: pulseaudio (Ubuntu Groovy) Status: New => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1889217 Title: Make digital mic on the AMD Renoir machines work under gnome desktop Status in alsa-lib package in Ubuntu: Fix Committed Status in alsa-ucm-conf package in Ubuntu: Fix Committed Status in pulseaudio package in Ubuntu: Fix Committed Status in alsa-lib source package in Focal: New Status in alsa-ucm-conf source package in Focal: New Status in pulseaudio source package in Focal: New Status in alsa-lib source package in Groovy: Fix Committed Status in alsa-ucm-conf source package in Groovy: Fix Committed Status in pulseaudio source package in Groovy: Fix Committed Bug description: [Impact] On the LENOVO AMD Renoir machines, there is a digital mic directly connected to the APU instead of the codec, so there are two separate sound cards in the system, one is for analogue codec driven by hda driver, the other is for the dmic driven by ASoC acp driver. The current audio stack (pulseaudio + alsa-ucm-conf + alsa-lib) doesn't support this design yet, it could support all audio devices on the codec well, but it doesn't support that dmic well. In the gnome-control-center, the dmic becomes two input devices: analog input and multichannel input, and users can only record sound from analog input, the multichannel input can't function at all. Besides this issue, there is another issue, after users plug an external mic, the external mic can't replace the dmic automatically, this gives users a bad experience since this behaviour is different from the other audio designs. [Fix for pulseaudio] backport 3 patches: 2 of them from upstream device-port: queue CARD CHANGE event before update default sink alsa: adjust ucm sink/source priority according to ports priority 1 of them from a merge request: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/305 [Fix for alsa-ucm-conf] backport 14 patches: 11 of them from upstream: ucm-fix-wrong-If-in-sequence-in-HiFi-dual.conf.patch ucm2-add-initial-ucm.conf-for-the-latest-alsa-lib.patch sof-hda-dsp-don-t-fail-if-Auto-Mute-control-is-not-p.patch ucm.conf-add-support-for-the-kernel-module-name-tree.patch sof-hda-dsp-make-Headphone-Playback-Switch-condition.patch sof-soundwire-initial-UCM2-version.patch sof-soundwire-cleanups-recommended-by-the-ucm-valida.patch sof-soundwire-rewrite-for-syntax-3.patch HDA-Intel-add-support-for-AMD-acp-microphone-devices.patch Fix-invalid-Regex-Type-in-various-Condition-blocks.patch hda-hdmi-add-HDMI4-HDMI5-HDMI6-devices.patch 3 of them from a merge request: https://github.com/alsa-project/alsa-ucm-conf/pull/41 [Fix for alsa-lib] backport 47 patches from upstream: Enabled-extended-namehints-in-alsa.conf.patch conf-add-snd_config_is_array-function.patch topology-use-snd_config_is_array-function.patch ucm-merge-the-array-items-from-the-condition-blocks.patch ucm-parse-SectionOnce-section-in-the-master-UCM-conf.patch ucm-execute-SectionDefaults-lately-when-the-first-ve.patch ucm-handle-set-_once-command.patch ucm-handle-set-_defaults-command.patch ucm-initialize-mgr-once_list.patch ucm-fix-SectionOnce-comment.patch ucm-fix-compilation-error-in-set_defaults_user.patch ucm-rename-SectionOnce-to-BootSequence.patch ucm-rename-_once-command-to-_boot-command.patch ucm-configuration-implement-in-place-Include.patch ucm-configuration-substitute-ConfDir-and-ConfTopDir.patch ucm-config-substitute-File-string-to-allow-variables.patch ucm-configuration-allow-to-define-the-configuration-.patch ucm-configuration-add-DefineRegex.patch ucm-substitute-arguments-in-sequences.patch ucm-allow-syntax-version-3.patch ucm-config-change-the-in-place-include-evaluation-or.patch ucm-allow-to-specify-the-toplevel-directory-using-as.patch ucm-substitute-also-value-strings.patch ucm-handle-strict-prefix-correctly-for-the-UCM-card-.patch ucm-String-condition-implement-Empty.patch ucm-Define-DefineRegex-is-supported-in-Syntax-3.patch ucm-substitute-OpenName.patch ucm-substitute-CardNumber.patch ucm-implement-the-toplevel-ucm-configuration-file-pa.patch ucm-substitute-device-modifier-names-too.patch ucm-substitute-device-strings-in-the-device-lists.patch ucm-substitute-component-sequence-string.patch ucm-substitute-verb-name-and-file-field.patch ucm-substitute-Comment-in-Transition-and-Device.patch ucm-substitute-RenameDevice-and-DeleteDevice-lists.patch ucm-substitute-arguments-in-sequences-only-for-synta.patch ucm-shuffle-code-in-compound_merge.patch
[Kernel-packages] [Bug 1889625] Re: Bug fix for ktls feature
** Description changed: [IMPACT] Clearing the sock TX queue in sk_set_socket() might cause unexpected out-of-order transmit when called from sock_orphan(), as outstanding packets can pick a different TX queue and bypass the ones already queued. This is undesired in general. More specifically, it breaks the in-order scheduling property guarantee for device-offloaded TLS sockets. Remove the call to sk_tx_queue_clear() in sk_set_socket(), and add it explicitly only where needed. - [FIXES] e022f0b4a03f "net: Introduce sk_tx_queue_mapping" This cleanly cherry picks into 5.4 from 5.8. It can be checked out in my branch here: https://git.launchpad.net/~bladernr/ubuntu/+source/linux/+git/focal 1889625-mxl-ktls-bugfix [REGRESSION RISK] - + low! [TEST] + reproducing the bug is not trivial. in general terms: + nic: ConnectX6-dx with crypto enabled + send intense encrypted tcp traffic with tls offload between many clients and one server. + * clients may run on the same machine. + * clients continuously opens and closes connection to server + + at some point decryption errores might arise on some of the clients. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1889625 Title: Bug fix for ktls feature Status in linux package in Ubuntu: In Progress Status in linux source package in Focal: In Progress Bug description: [IMPACT] Clearing the sock TX queue in sk_set_socket() might cause unexpected out-of-order transmit when called from sock_orphan(), as outstanding packets can pick a different TX queue and bypass the ones already queued. This is undesired in general. More specifically, it breaks the in-order scheduling property guarantee for device-offloaded TLS sockets. Remove the call to sk_tx_queue_clear() in sk_set_socket(), and add it explicitly only where needed. [FIXES] e022f0b4a03f "net: Introduce sk_tx_queue_mapping" This cleanly cherry picks into 5.4 from 5.8. It can be checked out in my branch here: https://git.launchpad.net/~bladernr/ubuntu/+source/linux/+git/focal 1889625-mxl-ktls-bugfix [REGRESSION RISK] low! [TEST] reproducing the bug is not trivial. in general terms: nic: ConnectX6-dx with crypto enabled send intense encrypted tcp traffic with tls offload between many clients and one server. * clients may run on the same machine. * clients continuously opens and closes connection to server at some point decryption errores might arise on some of the clients. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1889625/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891502] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1891502 Title: tpm tpm0: Error (28) sending savestate before suspend Status in linux package in Ubuntu: Confirmed Bug description: Upon clicking suspend via Log Out... button in Xubuntu and also via systemctl suspend, the screen turns to black for 2 sec but then brings me back to log in screen instead of suspending. This was not an issue in 18.04. Currently on fresh install of 20.04.1. Aug 13 08:12:59 laptop kernel: [87528.628302] PM: suspend entry (s2idle) Aug 13 08:13:00 laptop kernel: [87529.250844] printk: Suspending console(s) (use no_console_suspend to debug) Aug 13 08:13:00 laptop kernel: [87529.250844] printk: Suspending console(s) (use no_console_suspend to debug) Aug 13 08:13:00 laptop kernel: [87529.555272] tpm tpm0: Error (28) sending savestate before suspend Aug 13 08:13:00 laptop kernel: [87529.555287] PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28 Aug 13 08:13:00 laptop kernel: [87529.555292] PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x20 returns 28 Aug 13 08:13:00 laptop kernel: [87529.555296] PM: Device 00:01 failed to suspend: error 28 Aug 13 08:13:00 laptop kernel: [87529.929361] PM: Some devices failed to suspend, or early wake event detected Aug 13 08:13:01 laptop kernel: [87530.458095] PM: suspend exit Aug 13 08:13:01 laptop systemd[1]: systemd-suspend.service: Succeeded. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-42-generic 5.4.0-42.46 ProcVersionSignature: Ubuntu 5.4.0-42.46-generic 5.4.44 Uname: Linux 5.4.0-42-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: smrtalec 1174 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: XFCE Date: Thu Aug 13 08:25:19 2020 InstallationDate: Installed on 2020-08-10 (2 days ago) InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) MachineType: Hewlett-Packard HP Compaq 2510p Notebook PC PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-42-generic root=UUID=bf5ecda3-8bba-45a8-8f73-038836aa1952 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-42-generic N/A linux-backports-modules-5.4.0-42-generic N/A linux-firmware1.187.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/11/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68MSP Ver. F.30 dmi.board.name: 30C9 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 75.28 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68MSPVer.F.30:bd11/11/2011:svnHewlett-Packard:pnHPCompaq2510pNotebookPC:pvrF.30:rvnHewlett-Packard:rn30C9:rvrKBCVersion75.28:cvnHewlett-Packard:ct10:cvr: dmi.product.family: 103C_5336AN dmi.product.name: HP Compaq 2510p Notebook PC dmi.product.sku: KR918UT#ABA dmi.product.version: F.30 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891502/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891502] [NEW] tpm tpm0: Error (28) sending savestate before suspend
Public bug reported: Upon clicking suspend via Log Out... button in Xubuntu and also via systemctl suspend, the screen turns to black for 2 sec but then brings me back to log in screen instead of suspending. This was not an issue in 18.04. Currently on fresh install of 20.04.1. Aug 13 08:12:59 laptop kernel: [87528.628302] PM: suspend entry (s2idle) Aug 13 08:13:00 laptop kernel: [87529.250844] printk: Suspending console(s) (use no_console_suspend to debug) Aug 13 08:13:00 laptop kernel: [87529.250844] printk: Suspending console(s) (use no_console_suspend to debug) Aug 13 08:13:00 laptop kernel: [87529.555272] tpm tpm0: Error (28) sending savestate before suspend Aug 13 08:13:00 laptop kernel: [87529.555287] PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28 Aug 13 08:13:00 laptop kernel: [87529.555292] PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x20 returns 28 Aug 13 08:13:00 laptop kernel: [87529.555296] PM: Device 00:01 failed to suspend: error 28 Aug 13 08:13:00 laptop kernel: [87529.929361] PM: Some devices failed to suspend, or early wake event detected Aug 13 08:13:01 laptop kernel: [87530.458095] PM: suspend exit Aug 13 08:13:01 laptop systemd[1]: systemd-suspend.service: Succeeded. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-42-generic 5.4.0-42.46 ProcVersionSignature: Ubuntu 5.4.0-42.46-generic 5.4.44 Uname: Linux 5.4.0-42-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: smrtalec 1174 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: XFCE Date: Thu Aug 13 08:25:19 2020 InstallationDate: Installed on 2020-08-10 (2 days ago) InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) MachineType: Hewlett-Packard HP Compaq 2510p Notebook PC PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-42-generic root=UUID=bf5ecda3-8bba-45a8-8f73-038836aa1952 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-42-generic N/A linux-backports-modules-5.4.0-42-generic N/A linux-firmware1.187.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/11/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68MSP Ver. F.30 dmi.board.name: 30C9 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 75.28 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68MSPVer.F.30:bd11/11/2011:svnHewlett-Packard:pnHPCompaq2510pNotebookPC:pvrF.30:rvnHewlett-Packard:rn30C9:rvrKBCVersion75.28:cvnHewlett-Packard:ct10:cvr: dmi.product.family: 103C_5336AN dmi.product.name: HP Compaq 2510p Notebook PC dmi.product.sku: KR918UT#ABA dmi.product.version: F.30 dmi.sys.vendor: Hewlett-Packard ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1891502 Title: tpm tpm0: Error (28) sending savestate before suspend Status in linux package in Ubuntu: New Bug description: Upon clicking suspend via Log Out... button in Xubuntu and also via systemctl suspend, the screen turns to black for 2 sec but then brings me back to log in screen instead of suspending. This was not an issue in 18.04. Currently on fresh install of 20.04.1. Aug 13 08:12:59 laptop kernel: [87528.628302] PM: suspend entry (s2idle) Aug 13 08:13:00 laptop kernel: [87529.250844] printk: Suspending console(s) (use no_console_suspend to debug) Aug 13 08:13:00 laptop kernel: [87529.250844] printk: Suspending console(s) (use no_console_suspend to debug) Aug 13 08:13:00 laptop kernel: [87529.555272] tpm tpm0: Error (28) sending savestate before suspend Aug 13 08:13:00 laptop kernel: [87529.555287] PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28 Aug 13 08:13:00 laptop kernel: [87529.555292] PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x20 returns 28 Aug 13 08:13:00 laptop kernel: [87529.555296] PM: Device 00:01 failed to suspend: error 28 Aug 13 08:13:00 laptop kernel: [87529.929361] PM: Some devices failed to suspend, or early wake event detected Aug 13 08:13:01 laptop kernel: [87530.458095] PM: suspend exit Aug 13 08:13:01 laptop systemd[1]: systemd-suspend.service: Succeeded. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-42-generic 5.4.0-42.46 ProcVersionSignature: Ubuntu 5.4.0-42.46-generic 5.4.44 Uname: Linux 5.4.0-42-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: smrtalec 1174 F pulseaudio CasperMD5CheckResult: skip
[Kernel-packages] [Bug 1886827] Re: Machine hangs when doing a normal reboot
I haven't been able to compile 5.8-rc4 for some reason but have had success with 5.4.0-44 - I applied the patch to 5.4.0-44 and attached the dmesg file here. Hope this helps. ** Attachment added: "kernel messages from serial patched kernel 5.4.0-44" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1886827/+attachment/5401335/+files/dmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1886827 Title: Machine hangs when doing a normal reboot Status in linux package in Ubuntu: Incomplete Bug description: Hi, When booting into kernel 4.15.0-99-generic or higher and also kernel 5.3.0-53-generic or higher, the system hangs when issuing the reboot command or CTRL-ALT-DEL from console with the following console messages: -- snip Reached target Final Step. Starting Reboot... < following message repeats indefinetely every 120 seconds > INFO: task systemd-shutdow:1 blocked for more than 120 seconds. Not tainted 4.15.0-99-generic #100 " echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. -- snip I did a git bisect procedure between kernels 4.15.0-96-generic and 4.15.0-99 and it reported the following: -- snip b52be79f3c6cc89bb3834c5174843e34f945f386 is the first bad commit commit b52be79f3c6cc89bb3834c5174843e34f945f386 -- snip Ubuntu version affected: Ubuntu 4.15.0-99.100-generic 4.15.18 First kernel package affected: linux-image-4.15.0-99-generic Necessary debug files will be attached as soon as possible. Quinn --- ProblemType: Bug AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jul 9 09:55 seq crw-rw 1 root audio 116, 33 Jul 9 09:55 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay': 'aplay' ApportVersion: 2.20.9-0ubuntu7.15 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord': 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 18.04 HibernationDevice: RESUME=/dev/mapper/system-swap IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig': 'iwconfig' Lsusb: Bus 001 Device 003: ID 0b38:0010 Gear Head 107-Key Keyboard Bus 001 Device 002: ID 8087:07e6 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: To be filled by O.E.M. To be filled by O.E.M. Package: linux (not installed) PciMultimedia: ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-4.15.0-99-generic root=/dev/mapper/system-root ro rootflags=subvol=@ biosdevname=0 net.ifnames=0 nomodeset "dyndbg=file drivers/base/* +p" ProcVersionSignature: Ubuntu 4.15.0-99.100-generic 4.15.18 RelatedPackageVersions: linux-restricted-modules-4.15.0-99-generic N/A linux-backports-modules-4.15.0-99-generic N/A linux-firmware 1.173.18 RfKill: Error: [Errno 2] No such file or directory: 'rfkill': 'rfkill' Tags: bionic Uname: Linux 4.15.0-99-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip disk plugdev sudo _MarkForUpload: True dmi.bios.date: 05/05/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 5.6.5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Aptio CRB dmi.board.vendor: AMI Corporation dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr5.6.5:bd05/05/2016:svnTobefilledbyO.E.M.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnAMICorporation:rnAptioCRB:rvrTobefilledbyO.E.M.:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: To be filled by O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1886827/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891406] Re: Touchpad not detected
Thanks Kai-Heng. I added the text "i2c_hid.debug=1" to the line "GRUB_CMDLINE_LINUX_DEFAULT" of /etc/default/grub. Attached is the dmesg output. ** Attachment added: "dmesg" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891406/+attachment/5401336/+files/dmesg -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1891406 Title: Touchpad not detected Status in linux package in Ubuntu: Incomplete Bug description: Lenovo IdeaPad 3 15" Laptop, Intel Core i3-1005G1 Dual-Core Processor, 8GB Memory, 256GB Solid State Drive, Windows 10S - Abyss Blue - 81WE008HUS ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-42-generic 5.4.0-42.46 ProcVersionSignature: Ubuntu 5.4.0-42.46-generic 5.4.44 Uname: Linux 5.4.0-42-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: skjwang1501 F pulseaudio /dev/snd/controlC1: skjwang1501 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: Unity:Unity7:ubuntu Date: Wed Aug 12 19:53:05 2020 InstallationDate: Installed on 2020-07-25 (18 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200402) MachineType: LENOVO 81WE ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-42-generic root=UUID=89459a6c-37b1-4aa8-8399-dad2021b4422 ro i8042.reset quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-42-generic N/A linux-backports-modules-5.4.0-42-generic N/A linux-firmware1.187.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/29/2020 dmi.bios.vendor: LENOVO dmi.bios.version: EMCN36WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0R32866 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: IdeaPad 3 15IIL05 dmi.modalias: dmi:bvnLENOVO:bvrEMCN36WW:bd05/29/2020:svnLENOVO:pn81WE:pvrIdeaPad315IIL05:rvnLENOVO:rnLNVNB161216:rvrSDK0R32866WIN:cvnLENOVO:ct10:cvrIdeaPad315IIL05: dmi.product.family: IdeaPad 3 15IIL05 dmi.product.name: 81WE dmi.product.sku: LENOVO_MT_81WE_BU_idea_FM_IdeaPad 3 15IIL05 dmi.product.version: IdeaPad 3 15IIL05 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891406/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891451] Re: Add TGL+ SAGV display support
PPA: https://launchpad.net/~vicamo/+archive/ubuntu/ppa-1891451 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1891451 Title: Add TGL+ SAGV display support Status in HWE Next: New Status in linux package in Ubuntu: Incomplete Status in linux-oem-5.6 package in Ubuntu: Invalid Status in linux source package in Focal: Invalid Status in linux-oem-5.6 source package in Focal: In Progress Status in linux source package in Groovy: Incomplete Status in linux-oem-5.6 source package in Groovy: Invalid Bug description: TBD. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1891451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1861554] Re: Radeon mobility HD3450 (RV620) heavy screen flickering after trying to upgrade kernel 4.15.0-54
@kaihengfeng Yep, that works beautifully on Ubuntu 16.04.6 LTS. Thanks. Any idea if/when we would be looking at getting this committed into the kernel proper and back ported to all the current supported distros? Let me know if you need any further help testing. I'm limited in the hardware I have available but will help wherever I can so I can officially use the latest and greatest kernel. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1861554 Title: Radeon mobility HD3450 (RV620) heavy screen flickering after trying to upgrade kernel 4.15.0-54 Status in linux package in Ubuntu: Incomplete Bug description: laptop Asus x50sl with graphic card AMD rv620 / Mobility Radeon HD3450. Distro: Linux Mint 19.2 Tina base: Ubuntu 18.04 bionic. This happen trying any distro. I tried Ubuntu, Manjaro, Debian, Deepin, MX and so on. I'm stuck with Kernel 4.15.0-54 and 5.0.0-20 (and the contemporary 5.3 kernel). I cannot upgrade to newer kernels. Seems that the fixes for bug #1791312 broke my kind of card. here is a video: https://youtu.be/9Rez7s0V6iA here is another user with same problem: https://forums.linuxmint.com/viewtopic.php?p=1702005#p1702005 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1861554/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891461] Re: Add proper USB audio support for Lenovo ThinkStation P620
** Also affects: alsa-lib (Ubuntu Groovy) Importance: Undecided Status: Incomplete ** Also affects: pulseaudio (Ubuntu Groovy) Importance: Undecided Status: Incomplete ** Also affects: alsa-ucm-conf (Ubuntu Groovy) Importance: Undecided Status: Incomplete ** Also affects: alsa-lib (Ubuntu Focal) Importance: Undecided Status: New ** Also affects: pulseaudio (Ubuntu Focal) Importance: Undecided Status: New ** Also affects: alsa-ucm-conf (Ubuntu Focal) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1891461 Title: Add proper USB audio support for Lenovo ThinkStation P620 Status in alsa-lib package in Ubuntu: Incomplete Status in alsa-ucm-conf package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Status in alsa-lib source package in Focal: New Status in alsa-ucm-conf source package in Focal: New Status in pulseaudio source package in Focal: New Status in alsa-lib source package in Groovy: Incomplete Status in alsa-ucm-conf source package in Groovy: Incomplete Status in pulseaudio source package in Groovy: Incomplete Bug description: TBD To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1891461/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1890863] Re: [amdgpu] Display does not come on after suspend
Tested, however the issue persists ** Attachment added: "prevboot.5.8.txt" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1890863/+attachment/5401334/+files/prevboot.5.8.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1890863 Title: [amdgpu] Display does not come on after suspend Status in linux package in Ubuntu: Incomplete Bug description: After coming out of suspend the display is not receiving any data and stays in power saving mode. Only power cycling the system brings it back. Unsure whether this is related to amdgpu or something else. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-42.46-generic 5.4.44 Uname: Linux 5.4.0-42-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.6 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sat Aug 8 12:51:28 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] [1002:731f] (rev c4) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] [1458:2314] InstallationDate: Installed on 2020-01-08 (212 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Alpha amd64 (20200106) MachineType: System manufacturer System Product Name ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-42-generic root=UUID=d1ce6274-5a98-4eab-93b4-393469cec0d9 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/05/2020 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2603 dmi.board.asset.tag: Default string dmi.board.name: TUF GAMING X570-PLUS (WI-FI) dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2603:bd08/05/2020:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnTUFGAMINGX570-PLUS(WI-FI):rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.101-2 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.8-0ubuntu1~20.04.1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1890863/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891461] Re: Add proper USB audio support for Lenovo ThinkStation P620
... because USB audio should work already. If something doesn't work then please describe that. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1891461 Title: Add proper USB audio support for Lenovo ThinkStation P620 Status in alsa-lib package in Ubuntu: Incomplete Status in alsa-ucm-conf package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: TBD To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1891461/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891461] Re: Add proper USB audio support for Lenovo ThinkStation P620
Obviously more information is required :) ** Changed in: alsa-lib (Ubuntu) Status: New => Incomplete ** Changed in: alsa-ucm-conf (Ubuntu) Status: New => Incomplete ** Changed in: pulseaudio (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1891461 Title: Add proper USB audio support for Lenovo ThinkStation P620 Status in alsa-lib package in Ubuntu: Incomplete Status in alsa-ucm-conf package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: TBD To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1891461/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1845801] Re: [nvidia] Automatic login fails and then all subsequent logins fail. Killing gnome-session-binary fixes it, or just not using automatic login.
The proposed debdiff is wrong, it reverts a patch in the patch series by adding a new patch. I think we can probably remove the vt-handoff.patch from the patch series for groovy without much checking, but any SRU will need to consult with flavours to check if they need the handoff. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-390 in Ubuntu. https://bugs.launchpad.net/bugs/1845801 Title: [nvidia] Automatic login fails and then all subsequent logins fail. Killing gnome-session-binary fixes it, or just not using automatic login. Status in OEM Priority Project: Triaged Status in gdm3 package in Ubuntu: Confirmed Status in gnome-session package in Ubuntu: Confirmed Status in grub2 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-390 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-430 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-435 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-440 package in Ubuntu: Confirmed Status in gdm3 source package in Eoan: Confirmed Status in gnome-session source package in Eoan: Confirmed Status in nvidia-graphics-drivers-435 source package in Eoan: Confirmed Bug description: [ Impact ] In some platforms with specific Nvidia cards, auto-login will fail due to the old vt-handoff patch in grub2. [ Test Case ] 1. Boot ubuntu into desktop environment. 2. Enabled auto login in System->Users 3. Reboot the system [Expected result] System will boot into desktop environment without the login page. [Actual result] System boots to login page, and can't login to desktop environment with the correct password. [ Regression potential ] Low, the patch just removes vt.handoff part in grub2 package, and I can't find any regression in several runs of stress tests. PPA: https://launchpad.net/~hugh712/+archive/ubuntu/sru-1845801 --- I just updated to the Ubuntu 19.10 beta. After boot, I'm shown the GDM login screen (which I shouldn't; I have auto login enabled), and logging in just takes me back to the same user selection screen even though the password is correct. If I switch to a TTY and run `sudo pkill gnome-session-binary`, logging in through GDM starts working again. I should add that the do-release-upgrade was rocky; I did it in a terminal from within gnome, went away for a while, and when I returned, I just saw an Ubuntu 19.10 in a TTY. I was able to do `sudo dpkg --configure -a` and complete the upgrade, but I don't know if something's still messed up due to that. ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: xorg 1:7.7+19ubuntu12 ProcVersionSignature: Ubuntu 5.3.0-13.14-generic 5.3.0 Uname: Linux 5.3.0-13-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..01.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/:01:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 435.21 Sun Aug 25 08:17:57 CDT 2019 GCC version: gcc version 9.2.1 20190909 (Ubuntu 9.2.1-8ubuntu1) ApportVersion: 2.20.11-0ubuntu7 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sat Sep 28 19:55:42 2019 DistUpgraded: 2019-09-28 18:35:15,142 INFO cache.commit() DistroCodename: eoan DistroVariant: ubuntu DkmsStatus: nvidia, 435.21, 5.3.0-13-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation GP102 [GeForce GTX 1080 Ti] [10de:1b06] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. GP102 [GeForce GTX 1080 Ti] [1043:85e4] InstallationDate: Installed on 2019-09-14 (13 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Release amd64 (20190416) MachineType: MSI MS-7A67 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-13-generic root=UUID=04974c80-e732-49b6-8148-c3dce7c02a25 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display Title: Xorg crash UpgradeStatus: Upgraded to eoan on 2019-09-28 (0 days ago) dmi.bios.date: 01/25/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2.60 dmi.board.asset.tag: Default string dmi.board.name: H270I GAMING PRO AC (MS-7A67) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2.60:bd01/25/2018:svnMSI:pnMS-7A67:pvr1.0:rvnMSI:rnH270IGAMINGPROAC(MS-7A67):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.family: Default string dmi.product.name: MS-7A67 dmi.product.sku: Default string
[Kernel-packages] [Bug 1891451] Re: Add TGL+ SAGV display support
** Changed in: linux (Ubuntu Focal) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1891451 Title: Add TGL+ SAGV display support Status in HWE Next: New Status in linux package in Ubuntu: Incomplete Status in linux-oem-5.6 package in Ubuntu: Invalid Status in linux source package in Focal: Invalid Status in linux-oem-5.6 source package in Focal: In Progress Status in linux source package in Groovy: Incomplete Status in linux-oem-5.6 source package in Groovy: Invalid Bug description: TBD. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1891451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1861938] Re: laptop locks up every time I try to put it to sleep (suspend)
*** This bug is a duplicate of bug 1861837 *** https://bugs.launchpad.net/bugs/1861837 I am also seeing exactly this bug on older hardware (Lenovo G560) using up to date kernel, so this can not be a duplicate of #1861837. Workaround as proposed does also not work. Can I provide any more information or does anybody have another idea? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-signed-5.4 in Ubuntu. https://bugs.launchpad.net/bugs/1861938 Title: laptop locks up every time I try to put it to sleep (suspend) Status in linux-signed-5.4 package in Ubuntu: Confirmed Bug description: My ThinkPad X1 Carbon 7th Gen running 20.04 hangs every time I put it to sleep. It doesn't finish going to sleep, i.e., the LEDs stay on, and all I can do is hard power-cycle it by holding down the power button. /var/log/syslog extract showing that after "PM: suspend entry (deep)" the next thing that happens is the system rebooting after I power- cycled it. Feb 4 18:20:10 jik-d42-x1 systemd[1]: Starting Suspend... Feb 4 18:20:10 jik-d42-x1 systemd-sleep[4511]: /usr/lib/systemd/system-sleep/displaylink.sh: line 7: /tmp/PmMessagesPort_out: No such file or directory Feb 4 18:20:10 jik-d42-x1 systemd-sleep[4509]: Suspending system... Feb 4 18:20:10 jik-d42-x1 kernel: [ 54.970789] PM: suspend entry (deep) Feb 4 18:21:01 jik-d42-x1 systemd-modules-load[678]: Inserted module 'lp' Feb 4 18:21:01 jik-d42-x1 kernel: [0.00] microcode: microcode updated early to revision 0xca, date = 2019-10-03 Feb 4 18:21:01 jik-d42-x1 kernel: [0.00] Linux version 5.4.0-13-generic (buildd@lgw01-amd64-039) (gcc version 9.2.1 20200123 (Ubuntu 9.2.1-25ubuntu1)) #16-Ubuntu SMP Thu Jan 30 17:28:41 UTC 2020 (Ubuntu 5.4.0-13.16-generic 5.4.16) I also have a ThinkPad X1 Carbon 6th Gen running 20.04, and it does not have this problem, as you can see from this log snippet... Feb 4 16:24:32 jik-x1 systemd[1]: Starting Suspend... Feb 4 16:24:32 jik-x1 systemd-sleep[1904652]: /usr/lib/systemd/system-sleep/displaylink.sh: line 7: /tmp/PmMessagesPort_out: No such file or directory Feb 4 16:24:32 jik-x1 systemd-sleep[1904650]: Suspending system... Feb 4 16:24:32 jik-x1 kernel: [267217.248978] PM: suspend entry (deep) Feb 4 17:30:38 jik-x1 kernel: [267217.262691] Filesystems sync: 0.013 seconds Feb 4 17:30:38 jik-x1 kernel: [267217.263841] Freezing user space processes ... (elapsed 0.002 seconds) done. Feb 4 17:30:38 jik-x1 kernel: [267217.266689] OOM killer disabled. Feb 4 17:30:38 jik-x1 kernel: [267217.266689] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. ... etc. ... The 7th Gen laptop was able to go to sleep successfully before I upgraded it to 20.04, so this is a regression. I installed all the current packages from proposed as of a few minutes before filing this bug, and that did not fix the problem. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-13-generic 5.4.0-13.16 ProcVersionSignature: Ubuntu 5.4.0-13.16-generic 5.4.16 Uname: Linux 5.4.0-13-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu16 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Tue Feb 4 18:23:17 2020 InstallationDate: Installed on 2019-09-12 (145 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Release amd64 (20190416) SourcePackage: linux-signed-5.4 UpgradeStatus: Upgraded to focal on 2020-02-04 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-signed-5.4/+bug/1861938/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891461] [NEW] Add proper USB audio support for Lenovo ThinkStation P620
Public bug reported: TBD ** Affects: alsa-lib (Ubuntu) Importance: Undecided Status: New ** Affects: alsa-ucm-conf (Ubuntu) Importance: Undecided Status: New ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Also affects: alsa-lib (Ubuntu) Importance: Undecided Status: New ** Also affects: alsa-ucm-conf (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1891461 Title: Add proper USB audio support for Lenovo ThinkStation P620 Status in alsa-lib package in Ubuntu: New Status in alsa-ucm-conf package in Ubuntu: New Status in pulseaudio package in Ubuntu: New Bug description: TBD To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1891461/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891451] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1891451 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete ** Changed in: linux (Ubuntu Focal) Status: New => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1891451 Title: Add TGL+ SAGV display support Status in HWE Next: New Status in linux package in Ubuntu: Incomplete Status in linux-oem-5.6 package in Ubuntu: Invalid Status in linux source package in Focal: Incomplete Status in linux-oem-5.6 source package in Focal: In Progress Status in linux source package in Groovy: Incomplete Status in linux-oem-5.6 source package in Groovy: Invalid Bug description: TBD. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1891451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891454] Re: [UBUNTU 20.04] kernel: s390/cpum_cf, perf: change DFLT_CCERROR counter name
** Also affects: ubuntu-z-systems Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1891454 Title: [UBUNTU 20.04] kernel: s390/cpum_cf,perf: change DFLT_CCERROR counter name Status in Ubuntu on IBM z Systems: New Status in linux package in Ubuntu: New Bug description: Description: kernel: s390/cpum_cf,perf: change DFLT_CCERROR counter name Symptom: Counter name CCERROR is misleading. Problem: Change the counter name DLFT_CCERROR to DLFT_CCFINISH on IBM z15. This counter counts completed DEFLATE instructions with exit code 0, 1 or 2. Since exit code 0 means success and exit code 1 or 2 indicate errors, change the counter name to avoid confusion. This counter is incremented each time the DEFLATE instruction completed regardless if an error was detected or not. Solution: Rename s390 z15 counter named DFLT_CCERROR to DFLT_CCFINISH Reproduction: Command # ls /sys/devices/cpum_cf/events/DFLT_CCERROR currently succeeds. After this patch has been applied the command does not work anymore. The file does not exist anymore. Use command # ls /sys/devices/cpum_cf/events/DFLT_CCFINISH instead. Upstream-ID: 5ce1a24dd98c00a57a8fa13660648abf7e08e3ef Component: kernel 5.8 Will be integrated into 20.10 by kernel 5.8 integration. Backport available for 20.04. To be checked for 18.04 and 16.04, update will be provided Here is the backported patch. The upstream commit id is 3d3af181d370069861a3be94608464e2ff3682e2 ("s390/cpum_cf,perf: change DFLT_CCERROR counter name") To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/1891454/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891437] Re: [UBUNTU 20.04] zPCI: Enabling of a reserved PCI function regression introduced by multi-function support
** Also affects: ubuntu-z-systems Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1891437 Title: [UBUNTU 20.04] zPCI: Enabling of a reserved PCI function regression introduced by multi-function support Status in Ubuntu on IBM z Systems: New Status in linux package in Ubuntu: New Bug description: When a NVMe drive is assigned/hotplugged to a Linux LPAR then a bug is hit in lib/list_debug.c. And the device is not accessible, there is no /dev/ file and lspci does not report it also. [ 1681.564462] list_add double add: new=eed0f808, prev=eed0f808, next=4070a300. [ 1681.564489] [ cut here ] [ 1681.564490] kernel BUG at lib/list_debug.c:31! [ 1681.564504] monitor event: 0040 ilc:2 [#1] SMP [ 1681.564507] Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6t_rpfilter ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat iptable_mangle iptable_raw iptable_security nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c ip_set nfnetlink ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter s390_trng ghash_s390 prng aes_s390 des_s390 libdes sha512_s390 vfio_ccw sha1_s390 vfio_mdev mdev chsc_sch vfio_iommu_type1 eadm_sch vfio ip_tables dm_service_time nvme crc32_vx_s390 sha256_s390 sha_common nvme_core qeth_l2 zfcp qeth scsi_transport_fc qdio ccwgroup dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt [ 1681.564534] CPU: 6 PID: 139 Comm: kmcheck Not tainted 5.8.0-rc1+ #2 [ 1681.564535] Hardware name: IBM 8561 T01 701 (LPAR) [ 1681.564536] Krnl PSW : 0704c0018000 3ffcadb8 (__list_add_valid+0x70/0xa8) [ 1681.564544]R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 [ 1681.564545] Krnl GPRS: 0040 0027 0058 0007 [ 1681.564546]3ffcadb4 03e0051a7ce0 [ 1681.564547]4070a300 eed0f808 eed0f808 4070a300 [ 1681.564548]f56a2000 40c2c788 3ffcadb4 03e0051a7bc8 [ 1681.564583] Krnl Code: 3ffcada8: c02000302b09larl %r2,405d03ba 3ffcadae: c0e5ffdd30b1brasl %r14,3fb70f10 #3ffcadb4: af00mc 0,0 >3ffcadb8: b9040054lgr %r5,%r4 3ffcadbc: c02000302aadlarl %r2,405d0316 3ffcadc2: b9040041lgr %r4,%r1 3ffcadc6: c0e5ffdd30a5brasl %r14,3fb70f10 3ffcadcc: af00mc 0,0 [ 1681.564592] Call Trace: [ 1681.564594] [<3ffcadb8>] __list_add_valid+0x70/0xa8 [ 1681.564596] ([<3ffcadb4>] __list_add_valid+0x6c/0xa8) [ 1681.564599] [<3faf2920>] zpci_create_device+0x60/0x1b0 [ 1681.564601] [<3faf704a>] zpci_event_availability+0x282/0x2f0 [ 1681.564605] [<40367848>] chsc_process_crw+0x2b8/0xa18 [ 1681.564607] [<4036f35c>] crw_collect_info+0x254/0x348 [ 1681.564610] [<3fb2a6ea>] kthread+0x14a/0x168 [ 1681.564613] [<403a55c0>] ret_from_fork+0x24/0x2c [ 1681.564614] Last Breaking-Event-Address: [ 1681.564618] [<3fb70f62>] printk+0x52/0x58 [ 1681.564620] ---[ end trace 7ea67c348aa67e14 ]--- uname: Linux t83lp49.lnxne.boe 5.8.0-rc1+ #2 SMP Thu Jun 18 12:38:02 CEST 2020 s390x s390x s390x GNU/Linux How to reproduce: 1. Unassign a NVMe drive in HMC from your LPAR 2. Reassign it to your LPAR again 3. dmesg This issue is fixed by the following upstream commit that is also CCed to stable so might be coming in over the stable pulls in parallel: 3047766bc6ec ("s390/pci: fix enabling a reserved PCI function") To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/1891437/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891454] s390/cpum_cf, perf: change DFLT_CCERROR counter name
Default Comment by Bridge ** Attachment added: "s390/cpum_cf,perf: change DFLT_CCERROR counter name" https://bugs.launchpad.net/bugs/1891454/+attachment/5401272/+files/0001-s390-cpum_cf-perf-change-DFLT_CCERROR-counter-name.patch ** Changed in: ubuntu Assignee: (unassigned) => Skipper Bug Screeners (skipper-screen-team) ** Package changed: ubuntu => linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1891454 Title: [UBUNTU 20.04] kernel: s390/cpum_cf,perf: change DFLT_CCERROR counter name Status in Ubuntu on IBM z Systems: New Status in linux package in Ubuntu: New Bug description: Description: kernel: s390/cpum_cf,perf: change DFLT_CCERROR counter name Symptom: Counter name CCERROR is misleading. Problem: Change the counter name DLFT_CCERROR to DLFT_CCFINISH on IBM z15. This counter counts completed DEFLATE instructions with exit code 0, 1 or 2. Since exit code 0 means success and exit code 1 or 2 indicate errors, change the counter name to avoid confusion. This counter is incremented each time the DEFLATE instruction completed regardless if an error was detected or not. Solution: Rename s390 z15 counter named DFLT_CCERROR to DFLT_CCFINISH Reproduction: Command # ls /sys/devices/cpum_cf/events/DFLT_CCERROR currently succeeds. After this patch has been applied the command does not work anymore. The file does not exist anymore. Use command # ls /sys/devices/cpum_cf/events/DFLT_CCFINISH instead. Upstream-ID: 5ce1a24dd98c00a57a8fa13660648abf7e08e3ef Component: kernel 5.8 Will be integrated into 20.10 by kernel 5.8 integration. Backport available for 20.04. To be checked for 18.04 and 16.04, update will be provided Here is the backported patch. The upstream commit id is 3d3af181d370069861a3be94608464e2ff3682e2 ("s390/cpum_cf,perf: change DFLT_CCERROR counter name") To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/1891454/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05
sudo evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: AT Translated Set 2 keyboard /dev/input/event1: AKKO AKKO 3084BT /dev/input/event2: AKKO AKKO 3084BT Keyboard /dev/input/event3: AKKO AKKO 3084BT Wireless Radio Control /dev/input/event4: AKKO AKKO 3084BT Consumer Control /dev/input/event5: AKKO AKKO 3084BT /dev/input/event6: Integrated Camera: Integrated C /dev/input/event7: Logitech M350 /dev/input/event8: ITE Tech. Inc. ITE Device(8910) Keyboard /dev/input/event9: ITE Tech. Inc. ITE Device(8910) Consumer Control /dev/input/event10: ITE Tech. Inc. ITE Device(8910) Wireless Radio Control /dev/input/event11: Lid Switch /dev/input/event12: Power Button /dev/input/event13: Power Button /dev/input/event14: Video Bus /dev/input/event15: Video Bus /dev/input/event16: PC Speaker /dev/input/event17: Elan Touchpad /dev/input/event18: MSFT0001:00 04F3:3140 /dev/input/event19: Ideapad extra buttons /dev/input/event20: HDA NVidia HDMI/DP,pcm=3 /dev/input/event21: HDA NVidia HDMI/DP,pcm=7 /dev/input/event22: HDA NVidia HDMI/DP,pcm=8 /dev/input/event23: HDA NVidia HDMI/DP,pcm=9 /dev/input/event24: HDA NVidia HDMI/DP,pcm=10 /dev/input/event25: HDA Digital PCBeep /dev/input/event26: HD-Audio Generic Mic /dev/input/event27: HD-Audio Generic Headphone Select the device event number [0-27]: 17 Input driver version is 1.0.1 Input device ID: bus 0x18 vendor 0x4f3 product 0x3140 version 0x100 Input device name: "Elan Touchpad" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 272 (BTN_LEFT) Event code 325 (BTN_TOOL_FINGER) Event code 328 (BTN_TOOL_QUINTTAP) Event code 330 (BTN_TOUCH) Event code 333 (BTN_TOOL_DOUBLETAP) Event code 334 (BTN_TOOL_TRIPLETAP) Event code 335 (BTN_TOOL_QUADTAP) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 0 Min0 Max 3209 Resolution 31 Event code 1 (ABS_Y) Value 0 Min0 Max 2097 Resolution 31 Event code 24 (ABS_PRESSURE) Value 0 Min0 Max 255 Event code 47 (ABS_MT_SLOT) Value 0 Min0 Max4 Event code 53 (ABS_MT_POSITION_X) Value 0 Min0 Max 3209 Event code 54 (ABS_MT_POSITION_Y) Value 0 Min0 Max 2097 Event code 57 (ABS_MT_TRACKING_ID) Value 0 Min0 Max65535 Event code 58 (ABS_MT_PRESSURE) Value 0 Min0 Max 255 Properties: Property type 0 (INPUT_PROP_POINTER) Property type 2 (INPUT_PROP_BUTTONPAD) Testing ... (interrupt to exit) sudo evtest (I choose 18) Input driver version is 1.0.1 Input device ID: bus 0x18 vendor 0x4f3 product 0x3140 version 0x100 Input device name: "MSFT0001:00 04F3:3140" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 256 (BTN_0) Event code 272 (BTN_LEFT) Event code 273 (BTN_RIGHT) Event code 330 (BTN_TOUCH) Event type 2 (EV_REL) Event code 0 (REL_X) Event code 1 (REL_Y) Event code 6 (REL_HWHEEL) Event code 8 (REL_WHEEL) Event code 11 (REL_WHEEL_HI_RES) Event code 12 (REL_HWHEEL_HI_RES) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 0 Min0 Max 3209 Resolution 32 Event code 1 (ABS_Y) Value 0 Min0 Max 2097 Resolution 32 Event code 40 (ABS_MISC) Value 0 Min0 Max 15 Event type 4 (EV_MSC) Event code 4 (MSC_SCAN) Properties: Testing ... (interrupt to exit) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1887190 Title: MSFT Touchpad not working on Lenovo Legion-5 15ARH05 Status in linux package in Ubuntu: Confirmed Status in xserver-xorg-input-libinput package in Ubuntu: Confirmed Status in linux package in Arch Linux: Confirmed Status in linux package in Fedora: Confirmed Bug description: Hello The MSFT touchpad of this Lenovo Legion-5 15ARH05 laptop is not reacting at all (pointer and click never move when touchpad is touched). This has been reported by other users in various websites, with various linux systems including other Ubuntu systems, but I saw no launchpad bug so I post one. Example of websites covering the issue : - https://askubuntu.com/questions/1253830/lenovo-legion-5-touchpad (exactly the same laptop) - https://www.linux.org/threads/lenovo-legion-5-touchpad.29536/ (similar laptop) xinput indentifies it as MSFT0001:00 04F3:3140 Virtual core pointer id=2[master pointer (3)] ⎜ ↳ Virtual
[Kernel-packages] [Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05
about my previous post.. > I couldn't find the string 0x3140. Do you mean the device is defined in > another way? I am really sorry (it might have been late at night :) ) that line it was actually added by the kernel patch I prepared (I am building the whole kernel using makepkg and patching is done automatically).. one more thing I found is, when I remove and insert again i2c_hid module (with rmmod and modprobe), I get this messages from system journal journalctl -f Aug 13 16:36:48 hypervisor kernel: i2c_hid i2c-MSFT0001:00: supply vdd not found, using dummy regulator Aug 13 16:36:48 hypervisor kernel: i2c_hid i2c-MSFT0001:00: supply vddl not found, using dummy regulator Aug 13 16:36:48 hypervisor kernel: input: Elan Touchpad as /devices/platform/AMDI0010:03/i2c-0/i2c-MSFT0001:00/0018:04F3:3140.0008/input/input40 Aug 13 16:36:48 hypervisor kernel: input: MSFT0001:00 04F3:3140 as /devices/platform/AMDI0010:03/i2c-0/i2c-MSFT0001:00/0018:04F3:3140.0008/input/input39 Aug 13 16:36:48 hypervisor kernel: elan 0018:04F3:3140.0008: input,hidraw5: I2C HID v1.00 Mouse [MSFT0001:00 04F3:3140] on i2c-MSFT0001:00 Aug 13 16:36:48 hypervisor sudo[4748]: pam_unix(sudo:session): session closed for user root Aug 13 16:36:48 hypervisor /usr/lib/gdm-x-session[1902]: (II) config/udev: Adding input device Elan Touchpad (/dev/input/mouse1) Aug 13 16:36:48 hypervisor /usr/lib/gdm-x-session[1902]: (II) No input driver specified, ignoring this device. Aug 13 16:36:48 hypervisor /usr/lib/gdm-x-session[1902]: (II) This device may have been added with another device file. Aug 13 16:36:48 hypervisor /usr/lib/gdm-x-session[1902]: (II) config/udev: Adding input device MSFT0001:00 04F3:3140 (/dev/input/mouse2) Aug 13 16:36:48 hypervisor /usr/lib/gdm-x-session[1902]: (II) No input driver specified, ignoring this device. Aug 13 16:36:48 hypervisor /usr/lib/gdm-x-session[1902]: (II) This device may have been added with another device file. Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (II) config/udev: Adding input device MSFT0001:00 04F3:3140 (/dev/input/event18) Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (**) MSFT0001:00 04F3:3140: Applying InputClass "evdev pointer catchall" Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (**) MSFT0001:00 04F3:3140: Applying InputClass "libinput pointer catchall" Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (II) Using input driver 'libinput' for 'MSFT0001:00 04F3:3140' Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 56 paused 0 Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (**) MSFT0001:00 04F3:3140: always reports core events Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (**) Option "Device" "/dev/input/event18" Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (**) Option "_source" "server/udev" Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (II) event18 - MSFT0001:00 04F3:3140: is tagged by udev as: Mouse Pointingstick Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (II) event18 - MSFT0001:00 04F3:3140: device is a pointer Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (II) event18 - MSFT0001:00 04F3:3140: device removed Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:03/i2c-0/i2c-MSFT0001:00/0018:04F3:3140.0008/input/input39/event18" Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (II) XINPUT: Adding extended input device "MSFT0001:00 04F3:3140" (type: MOUSE, id 20) Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (**) Option "AccelerationScheme" "none" Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (**) MSFT0001:00 04F3:3140: (accel) selected scheme none/0 Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (**) MSFT0001:00 04F3:3140: (accel) acceleration factor: 2.000 Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (**) MSFT0001:00 04F3:3140: (accel) acceleration threshold: 4 Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (II) event18 - MSFT0001:00 04F3:3140: is tagged by udev as: Mouse Pointingstick Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (II) event18 - MSFT0001:00 04F3:3140: device is a pointer Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (II) config/udev: Adding input device Elan Touchpad (/dev/input/event17) Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (**) Elan Touchpad: Applying InputClass "evdev touchpad catchall" Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (**) Elan Touchpad: Applying InputClass "libinput touchpad catchall" Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (II) Using input driver 'libinput' for 'Elan Touchpad' Aug 13 16:36:49 hypervisor /usr/lib/gdm-x-session[1902]: (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 82 paused 0 Aug 13 16:36:49 hypervisor
[Kernel-packages] [Bug 1891451] [NEW] Add TGL+ SAGV display support
Public bug reported: TBD. ** Affects: hwe-next Importance: Undecided Status: New ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Affects: linux-oem-5.6 (Ubuntu) Importance: Undecided Status: Invalid ** Affects: linux (Ubuntu Focal) Importance: Undecided Status: New ** Affects: linux-oem-5.6 (Ubuntu Focal) Importance: High Assignee: You-Sheng Yang (vicamo) Status: In Progress ** Affects: linux (Ubuntu Groovy) Importance: Undecided Status: New ** Affects: linux-oem-5.6 (Ubuntu Groovy) Importance: Undecided Status: Invalid ** Tags: oem-priority originate-from-1890495 somerville ** Also affects: linux-oem-5.6 (Ubuntu) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Groovy) Importance: Undecided Status: New ** Also affects: linux-oem-5.6 (Ubuntu Groovy) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Focal) Importance: Undecided Status: New ** Also affects: linux-oem-5.6 (Ubuntu Focal) Importance: Undecided Status: New ** Changed in: linux-oem-5.6 (Ubuntu Groovy) Status: New => Invalid ** Changed in: linux-oem-5.6 (Ubuntu Focal) Assignee: (unassigned) => You-Sheng Yang (vicamo) ** Changed in: linux-oem-5.6 (Ubuntu Focal) Importance: Undecided => High ** Changed in: linux-oem-5.6 (Ubuntu Focal) Status: New => In Progress ** Tags added: oem-priority originate-from-1890495 somerville -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1891451 Title: Add TGL+ SAGV display support Status in HWE Next: New Status in linux package in Ubuntu: New Status in linux-oem-5.6 package in Ubuntu: Invalid Status in linux source package in Focal: New Status in linux-oem-5.6 source package in Focal: In Progress Status in linux source package in Groovy: New Status in linux-oem-5.6 source package in Groovy: Invalid Bug description: TBD. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1891451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891454] [NEW] [UBUNTU 20.04] kernel: s390/cpum_cf, perf: change DFLT_CCERROR counter name
You have been subscribed to a public bug: Description: kernel: s390/cpum_cf,perf: change DFLT_CCERROR counter name Symptom: Counter name CCERROR is misleading. Problem: Change the counter name DLFT_CCERROR to DLFT_CCFINISH on IBM z15. This counter counts completed DEFLATE instructions with exit code 0, 1 or 2. Since exit code 0 means success and exit code 1 or 2 indicate errors, change the counter name to avoid confusion. This counter is incremented each time the DEFLATE instruction completed regardless if an error was detected or not. Solution: Rename s390 z15 counter named DFLT_CCERROR to DFLT_CCFINISH Reproduction: Command # ls /sys/devices/cpum_cf/events/DFLT_CCERROR currently succeeds. After this patch has been applied the command does not work anymore. The file does not exist anymore. Use command # ls /sys/devices/cpum_cf/events/DFLT_CCFINISH instead. Upstream-ID: 5ce1a24dd98c00a57a8fa13660648abf7e08e3ef Component: kernel 5.8 Will be integrated into 20.10 by kernel 5.8 integration. Backport available for 20.04. To be checked for 18.04 and 16.04, update will be provided Here is the backported patch. The upstream commit id is 3d3af181d370069861a3be94608464e2ff3682e2 ("s390/cpum_cf,perf: change DFLT_CCERROR counter name") ** Affects: linux (Ubuntu) Importance: Undecided Assignee: Skipper Bug Screeners (skipper-screen-team) Status: New ** Tags: architecture-s39064 bugnameltc-187544 severity-high targetmilestone-inin2004 -- [UBUNTU 20.04] kernel: s390/cpum_cf,perf: change DFLT_CCERROR counter name https://bugs.launchpad.net/bugs/1891454 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1891449] Re: Enable PCI ACS for platform opt to get the usb flash drive from WD19TB
** Summary changed: - Enable PCI ACS for platform opt to get the usb dongle from WD19TB + Enable PCI ACS for platform opt to get the usb flash drive from WD19TB -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1891449 Title: Enable PCI ACS for platform opt to get the usb flash drive from WD19TB Status in HWE Next: New Status in linux-oem-5.6 package in Ubuntu: New Status in linux-oem-5.6 source package in Focal: In Progress Bug description: [Impact] Connect with the WD19TB on the right TB port and plug the USB flash drive on it, the machine can't recognize the USB flash drive. [Fix] Enable the PCI ACS when Intel IOMMU is detected with platform opt in hint. [test] With the fix, the machine can recognize the USB flash drive. [Regression Potential] Low. the patch has landed on the mainline kernel. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1891449/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp