[Kernel-packages] [Bug 1909428] Re: eeh-basic.sh from powerpc in ubuntu_kernel_selftests failed with unexpected operator on F-5.8
** Also affects: linux (Ubuntu) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Hirsute) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Groovy) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Focal) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1909428 Title: eeh-basic.sh from powerpc in ubuntu_kernel_selftests failed with unexpected operator on F-5.8 Status in ubuntu-kernel-tests: In Progress Status in linux package in Ubuntu: New Status in linux source package in Focal: New Status in linux source package in Groovy: New Status in linux source package in Hirsute: New Bug description: Issue found on 5.8.0-34.37~20.04.2 with P8 node dryden This is a test case issue,caused by the following line in the script: $ test "$failed" == 0 /bin/sh: 4: test: 0: unexpected operator To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1909428/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1912789] Re: Add support for selective build of special drivers
Resetting back to pending to reflect the required fixup. ** Changed in: linux (Ubuntu Focal) Status: Fix Released => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1912789 Title: Add support for selective build of special drivers Status in linux package in Ubuntu: In Progress Status in linux source package in Focal: Fix Committed Bug description: [SRU Justification] = Impact = We want to add some driver code which exists in the primary kernel source but will not get included unless specifically asked for. As long as there are no drivers using this, there is no user-visible change. = Impact = This will be done by adding a new config option which gets turned on via build setup rules. The default will be off. = Testcase = As long as there are no consumers changes can only be seen by inspecting the build logs (if even that). = Regression Potential = This prepares for future consumers. At this stage either the build will fail completely or pass and in that case the produced kernel binaries are the same as they were before. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1912789/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1915717] Re: Ubuntu 21.04, kernel feature request, TLS device offload for Bond
Hi, I retried and All 8 commits were cleanly applied above tag: Ubuntu-unstable-5.11.0-10.11 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1915717 Title: Ubuntu 21.04, kernel feature request, TLS device offload for Bond Status in linux package in Ubuntu: Confirmed Bug description: The request here is to pull needed patches to support tls rx/tx offload for bond interfaces. patch set: 4e5a73329051 net/tls: Except bond interface from some TLS checks 153cbd137f0a net/tls: Device offload to use lowest netdevice in chain dc5809f9e2b6 net/bonding: Declare TLS RX device offload support 89df6a810470 net/bonding: Implement TLS TX device offload f45583de361d net/bonding: Take update_features call out of XFRM funciton 007feb87fb15 net/bonding: Implement ndo_sk_get_lower_dev 5b99854540e3 net/bonding: Take IP hash logic into a helper 719a402cf603 net: netdevice: Add operation ndo_sk_get_lower_dev https://www.spinics.net/lists/netdev/msg714607.html https://www.spinics.net/lists/netdev/msg714991.html * the set was originally applied to net/net-next (hashes above are from net-next tree cloned from git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git) * The set is cleanly applied on ubuntu-unstable branch (cloned from git://git.launchpad.net/~ubuntu-kernel/ubuntu/+source/linux/+git/unstable) * the set is accepted to upstream v5.12 and thus not natively in 21.04 thanks, Amir To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1915717/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1916570] Re: BlueZ 5.56 release
** Tags added: upgrade-software-version -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1916570 Title: BlueZ 5.56 release Status in bluez package in Ubuntu: In Progress Bug description: BlueZ 5.56 is now available: https://mirrors.edge.kernel.org/pub/linux/bluetooth/ ver 5.56: Fix issue with setting AVDTP disconnect timer. Fix issue with AVDTP not sending GetCapabilities. Fix issue with AVDTP connecting using streaming mode. Fix issue with handling A2DP and remote SEP disappearing. Fix issue with handling session of A2DP channels. Fix issue with GATT and handling device removal. Fix issue with GATT not accepting multiple requests. Fix issue with HID report value callback registration. Add support for new advertising management command. Add support for battery D-Bus interface. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1916570/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1916468] Re: powerpc/eeh-basic.sh in kselftest make P8 node stopped working
https://lists.ubuntu.com/archives/kernel-team/2021-February/117502.html ** Changed in: ubuntu-kernel-tests Status: New => In Progress ** Changed in: ubuntu-kernel-tests Assignee: (unassigned) => Po-Hsu Lin (cypressyew) ** Changed in: linux (Ubuntu Focal) Assignee: (unassigned) => Po-Hsu Lin (cypressyew) ** Changed in: linux (Ubuntu Focal) Status: Incomplete => In Progress -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1916468 Title: powerpc/eeh-basic.sh in kselftest make P8 node stopped working Status in ubuntu-kernel-tests: In Progress Status in linux package in Ubuntu: Fix Released Status in linux source package in Focal: In Progress Bug description: [Impact] When trying to run this test on P8 node entei with Focal kernel, it will try to break 4 devices on Focal, and one of them is using the AHCI driver which doesn't support error recovery: $ sudo ./eeh-basic.sh :00:00.0, Skipped: bridge 0001:00:00.0, Skipped: bridge 0020:00:00.0, Skipped: bridge 0021:00:00.0, Skipped: bridge 0021:01:00.0, Skipped: bridge 0021:02:01.0, Skipped: bridge 0021:02:08.0, Skipped: bridge 0021:02:09.0, Skipped: bridge 0021:02:0a.0, Skipped: bridge 0021:02:0b.0, Skipped: bridge 0021:02:0c.0, Skipped: bridge 0021:0d:00.0, Added 0021:0e:00.0, Added 0021:0f:00.0, Skipped: bridge 0021:10:00.0, Added 0022:00:00.0, Skipped: bridge 0022:01:00.0, Added Found 4 breakable devices... Breaking 0021:0d:00.0... 0021:0d:00.0, waited 0/60 0021:0d:00.0, waited 1/60 0021:0d:00.0, waited 2/60 0021:0d:00.0, waited 3/60 0021:0d:00.0, waited 4/60 0021:0d:00.0, waited 5/60 0021:0d:00.0, waited 6/60 0021:0d:00.0, waited 7/60 0021:0d:00.0, waited 8/60 0021:0d:00.0, Recovered after 9 seconds Breaking 0021:0e:00.0... 0021:0e:00.0, waited 0/60 0021:0e:00.0, waited 1/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 2/60 ./eeh-basic.sh: 74: sleep: Input/output error ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 59/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 60/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, Failed to recover! Breaking 0021:10:00.0... Skipping 0021:10:00.0, Initial PE state is not ok Breaking 0022:01:00.0... Skipping 0022:01:00.0, Initial PE state is not ok 3 devices failed to recover (4 tested) ./eeh-basic.sh: 81: lspci: Input/output error ./eeh-basic.sh: 81: diff: Input/output error ./eeh-basic.sh: 82: rm: Input/output error ./eeh-basic.sh: 84: test: 3: unexpected operator With the driver failed to recovery, the system will start acting up. $ ls ls: command not found And drop into a read-only state [Fixes] * bbe9064f30f06e ("selftests/eeh: Skip ahci adapters") This is only affecting Focal and it can be cherry-picked. [Test case] Run the eeh-basic.sh script in tools/testing/selftests/powerpc/eeh/ on the affected P8 node, the test should pass without any issue. [Where problems could occur] This fix is limited to PowerPC testing tool, it should not cause any issue. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1916468/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1885087] Re: Can't keep brightness value after reboot/poweroff in some nvidia gfx
** Changed in: oem-priority Status: Fix Committed => Fix Released ** Changed in: oem-priority/bionic Status: Fix Committed => Fix Released ** Changed in: oem-priority/focal Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-450 in Ubuntu. https://bugs.launchpad.net/bugs/1885087 Title: Can't keep brightness value after reboot/poweroff in some nvidia gfx Status in OEM Priority Project: Fix Released Status in OEM Priority Project bionic series: Fix Released Status in OEM Priority Project focal series: Fix Released Status in nvidia-graphics-drivers-450 package in Ubuntu: Fix Released Status in nvidia-graphics-drivers-455 package in Ubuntu: Fix Released Status in nvidia-graphics-drivers-450 source package in Bionic: Fix Released Status in nvidia-graphics-drivers-455 source package in Bionic: Fix Released Status in nvidia-graphics-drivers-450 source package in Focal: Fix Released Status in nvidia-graphics-drivers-455 source package in Focal: Fix Released Status in nvidia-graphics-drivers-450 source package in Groovy: Fix Released Status in nvidia-graphics-drivers-455 source package in Groovy: Fix Released Bug description: systemd-backlight saves the brightness value right before shutdown.target, however it doesn't work because the nvidia_0 backlight sysfs disappears after GFX device is closed by Xorg, long before shutdown.target. [Impact] System can not keep the brightness value, after reboot/poweroff the brightness will still be highest. [Fix] Suggested by Nvidia, we need to run nvidia-persistenced.service before systemd-backlight@backlight:nvidia_0.service [Test Case] Adjust the brightness value, reboot, the value must keep persistence during boots. [Regression Risk] Low, this fix is just adjust the systemd order more earier. https://github.com/hugh712/nvidia-graphics-drivers To manage notifications about this bug go to: https://bugs.launchpad.net/oem-priority/+bug/1885087/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1916468] Re: powerpc/eeh-basic.sh in kselftest make P8 node stopped working
** Description changed: - Issue found on node entei with Focal kernel. + [Impact] + When trying to run this test on P8 node entei with Focal kernel, it will try to break 4 devices on Focal, and one of them is using the AHCI driver: - When trying to run this test, it will try to break 4 devices on Focal, - and one of them is using the AHCI driver: - - $ sudo ./eeh-basic.sh + $ sudo ./eeh-basic.sh :00:00.0, Skipped: bridge 0001:00:00.0, Skipped: bridge 0020:00:00.0, Skipped: bridge 0021:00:00.0, Skipped: bridge 0021:01:00.0, Skipped: bridge 0021:02:01.0, Skipped: bridge 0021:02:08.0, Skipped: bridge 0021:02:09.0, Skipped: bridge 0021:02:0a.0, Skipped: bridge 0021:02:0b.0, Skipped: bridge 0021:02:0c.0, Skipped: bridge 0021:0d:00.0, Added 0021:0e:00.0, Added 0021:0f:00.0, Skipped: bridge 0021:10:00.0, Added 0022:00:00.0, Skipped: bridge 0022:01:00.0, Added Found 4 breakable devices... Breaking 0021:0d:00.0... 0021:0d:00.0, waited 0/60 0021:0d:00.0, waited 1/60 0021:0d:00.0, waited 2/60 0021:0d:00.0, waited 3/60 0021:0d:00.0, waited 4/60 0021:0d:00.0, waited 5/60 0021:0d:00.0, waited 6/60 0021:0d:00.0, waited 7/60 0021:0d:00.0, waited 8/60 0021:0d:00.0, Recovered after 9 seconds Breaking 0021:0e:00.0... 0021:0e:00.0, waited 0/60 0021:0e:00.0, waited 1/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 2/60 ./eeh-basic.sh: 74: sleep: Input/output error - 0021:0e:00.0, waited 3/60 - ./eeh-basic.sh: 74: sleep: Input/output error ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 59/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 60/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, Failed to recover! Breaking 0021:10:00.0... Skipping 0021:10:00.0, Initial PE state is not ok Breaking 0022:01:00.0... Skipping 0022:01:00.0, Initial PE state is not ok 3 devices failed to recover (4 tested) ./eeh-basic.sh: 81: lspci: Input/output error ./eeh-basic.sh: 81: diff: Input/output error ./eeh-basic.sh: 82: rm: Input/output error ./eeh-basic.sh: 84: test: 3: unexpected operator With the driver failed to recovery, the system will start acting up. $ ls ls: command not found - And drop into read-only state, dmesg can be found in the attachment. + And drop into a read-only state + + [Fixes] + * bbe9064f30f06e ("selftests/eeh: Skip ahci adapters") + + This is only affecting Focal and it can be cherry-picked. + + [Test case] + Run the eeh-basic.sh script in tools/testing/selftests/powerpc/eeh/ on the affected P8 node, the test should pass without any issue. + + [Where problems could occur] + This fix is limited to PowerPC testing tool, it should not cause any issue. ** Description changed: - [Impact] - When trying to run this test on P8 node entei with Focal kernel, it will try to break 4 devices on Focal, and one of them is using the AHCI driver: + [Impact] + When trying to run this test on P8 node entei with Focal kernel, it will try to break 4 devices on Focal, and one of them is using the AHCI driver which doesn't support error recovery: $ sudo ./eeh-basic.sh :00:00.0, Skipped: bridge 0001:00:00.0, Skipped: bridge 0020:00:00.0, Skipped: bridge 0021:00:00.0, Skipped: bridge 0021:01:00.0, Skipped: bridge 0021:02:01.0, Skipped: bridge 0021:02:08.0, Skipped: bridge 0021:02:09.0, Skipped: bridge 0021:02:0a.0, Skipped: bridge 0021:02:0b.0, Skipped: bridge 0021:02:0c.0, Skipped: bridge 0021:0d:00.0, Added 0021:0e:00.0, Added 0021:0f:00.0, Skipped: bridge 0021:10:00.0, Added 0022:00:00.0, Skipped: bridge 0022:01:00.0, Added Found 4 breakable devices... Breaking 0021:0d:00.0... 0021:0d:00.0, waited 0/60 0021:0d:00.0, waited 1/60 0021:0d:00.0, waited 2/60 0021:0d:00.0, waited 3/60 0021:0d:00.0, waited 4/60 0021:0d:00.0, waited 5/60 0021:0d:00.0, waited 6/60 0021:0d:00.0, waited 7/60 0021:0d:00.0, waited 8/60 0021:0d:00.0, Recovered after 9 seconds Breaking 0021:0e:00.0... 0021:0e:00.0, waited 0/60 0021:0e:00.0, waited 1/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 2/60 ./eeh-basic.sh: 74: sleep: Input/output error ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 59/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 60/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, Failed to recover! Breaking 0021:10:00.0... Skipping 0021:10:00.0, Initial PE state is not ok Breaking 0022:01:00.0... Skipping 0022:01:00.0, Initial PE state is not ok 3 devices failed to recover (4 tested) ./eeh-basic.sh: 81: lspci: Input/output error ./eeh-basic.sh: 81: diff: Input/output error ./eeh-basic.sh: 82: rm: Input/output error ./eeh-basic.sh: 84: test: 3: unexpected operator With the driver failed to recovery, the system will start acting up. $ ls ls: command
[Kernel-packages] [Bug 1906236] Re: Intel Thunderbolt 4 Maple Ridge support
** Changed in: hwe-next Status: New => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1906236 Title: Intel Thunderbolt 4 Maple Ridge support Status in HWE Next: Fix Released Status in linux package in Ubuntu: Fix Released Status in linux-oem-5.10 package in Ubuntu: Invalid Status in linux source package in Focal: Won't Fix Status in linux-oem-5.10 source package in Focal: Fix Released Status in linux source package in Hirsute: Fix Released Status in linux-oem-5.10 source package in Hirsute: Invalid Bug description: [SRU] BugLink: https://bugs.launchpad.net/bugs/1906236 [Impact] New hardware support for Intel Thunderbolt4/USB4 controller codenamed Maple Ridge, PCI ID 8086:1137. [Fix] Patchset titled "thunderbolt: USB4 NVM upgrade improvements & Maple Ridge support" in https://lore.kernel.org/lkml/20201119155523.41332-1-mika.westerb...@linux.intel.com/ currently landed in thunderbolt tree as commit 45ef561abcdd ("thunderbolt: Move max_boot_acl field to correct place in struct icm") targeting v5.11, as well as commit 62233f88fda2 ("xhci-pci: Allow host runtime PM as default for Intel Maple Ridge xHCI") from the xHCI tree also targeting v5.11. [Test Case] 1. attach thunderbolt docking to the port connecting to a Maple Ridge controller, 2. use `boltctl list` to enumerate thunderbolt devices connected [Where problems could occur] These changes introduce a proxy for USB4 route operations with fallback to native one depending on the protocol version, so it doesn't seem to affect exsiting devices. == Original Bug Description == Patchset https://lore.kernel.org/lkml/20201119155523.41332-1-mika.westerb...@linux.intel.com/ for Maple Ridge support landed git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt.git Patchset https://lore.kernel.org/linux- usb/20201105110031.8691-1-mika.westerb...@linux.intel.com/ for xHCI runtime PM accepted in https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h =for-usb-linus To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1906236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1916468] Re: powerpc/eeh-basic.sh in kselftest make P8 node stopped working
Hi Guilherme, yes this should be skipped in the test. Thanks ** Changed in: linux (Ubuntu) Status: Incomplete => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1916468 Title: powerpc/eeh-basic.sh in kselftest make P8 node stopped working Status in ubuntu-kernel-tests: New Status in linux package in Ubuntu: Fix Released Status in linux source package in Focal: Incomplete Bug description: [Impact] When trying to run this test on P8 node entei with Focal kernel, it will try to break 4 devices on Focal, and one of them is using the AHCI driver which doesn't support error recovery: $ sudo ./eeh-basic.sh :00:00.0, Skipped: bridge 0001:00:00.0, Skipped: bridge 0020:00:00.0, Skipped: bridge 0021:00:00.0, Skipped: bridge 0021:01:00.0, Skipped: bridge 0021:02:01.0, Skipped: bridge 0021:02:08.0, Skipped: bridge 0021:02:09.0, Skipped: bridge 0021:02:0a.0, Skipped: bridge 0021:02:0b.0, Skipped: bridge 0021:02:0c.0, Skipped: bridge 0021:0d:00.0, Added 0021:0e:00.0, Added 0021:0f:00.0, Skipped: bridge 0021:10:00.0, Added 0022:00:00.0, Skipped: bridge 0022:01:00.0, Added Found 4 breakable devices... Breaking 0021:0d:00.0... 0021:0d:00.0, waited 0/60 0021:0d:00.0, waited 1/60 0021:0d:00.0, waited 2/60 0021:0d:00.0, waited 3/60 0021:0d:00.0, waited 4/60 0021:0d:00.0, waited 5/60 0021:0d:00.0, waited 6/60 0021:0d:00.0, waited 7/60 0021:0d:00.0, waited 8/60 0021:0d:00.0, Recovered after 9 seconds Breaking 0021:0e:00.0... 0021:0e:00.0, waited 0/60 0021:0e:00.0, waited 1/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 2/60 ./eeh-basic.sh: 74: sleep: Input/output error ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 59/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 60/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, Failed to recover! Breaking 0021:10:00.0... Skipping 0021:10:00.0, Initial PE state is not ok Breaking 0022:01:00.0... Skipping 0022:01:00.0, Initial PE state is not ok 3 devices failed to recover (4 tested) ./eeh-basic.sh: 81: lspci: Input/output error ./eeh-basic.sh: 81: diff: Input/output error ./eeh-basic.sh: 82: rm: Input/output error ./eeh-basic.sh: 84: test: 3: unexpected operator With the driver failed to recovery, the system will start acting up. $ ls ls: command not found And drop into a read-only state [Fixes] * bbe9064f30f06e ("selftests/eeh: Skip ahci adapters") This is only affecting Focal and it can be cherry-picked. [Test case] Run the eeh-basic.sh script in tools/testing/selftests/powerpc/eeh/ on the affected P8 node, the test should pass without any issue. [Where problems could occur] This fix is limited to PowerPC testing tool, it should not cause any issue. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1916468/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1916468] Re: powerpc/eeh-basic.sh in kselftest make P8 node stopped working
** Also affects: ubuntu-kernel-tests Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1916468 Title: powerpc/eeh-basic.sh in kselftest make P8 node stopped working Status in ubuntu-kernel-tests: New Status in linux package in Ubuntu: Fix Released Status in linux source package in Focal: Incomplete Bug description: Issue found on node entei with Focal kernel. When trying to run this test, it will try to break 4 devices on Focal, and one of them is using the AHCI driver: $ sudo ./eeh-basic.sh :00:00.0, Skipped: bridge 0001:00:00.0, Skipped: bridge 0020:00:00.0, Skipped: bridge 0021:00:00.0, Skipped: bridge 0021:01:00.0, Skipped: bridge 0021:02:01.0, Skipped: bridge 0021:02:08.0, Skipped: bridge 0021:02:09.0, Skipped: bridge 0021:02:0a.0, Skipped: bridge 0021:02:0b.0, Skipped: bridge 0021:02:0c.0, Skipped: bridge 0021:0d:00.0, Added 0021:0e:00.0, Added 0021:0f:00.0, Skipped: bridge 0021:10:00.0, Added 0022:00:00.0, Skipped: bridge 0022:01:00.0, Added Found 4 breakable devices... Breaking 0021:0d:00.0... 0021:0d:00.0, waited 0/60 0021:0d:00.0, waited 1/60 0021:0d:00.0, waited 2/60 0021:0d:00.0, waited 3/60 0021:0d:00.0, waited 4/60 0021:0d:00.0, waited 5/60 0021:0d:00.0, waited 6/60 0021:0d:00.0, waited 7/60 0021:0d:00.0, waited 8/60 0021:0d:00.0, Recovered after 9 seconds Breaking 0021:0e:00.0... 0021:0e:00.0, waited 0/60 0021:0e:00.0, waited 1/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 2/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 3/60 ./eeh-basic.sh: 74: sleep: Input/output error ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 59/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, waited 60/60 ./eeh-basic.sh: 74: sleep: Input/output error 0021:0e:00.0, Failed to recover! Breaking 0021:10:00.0... Skipping 0021:10:00.0, Initial PE state is not ok Breaking 0022:01:00.0... Skipping 0022:01:00.0, Initial PE state is not ok 3 devices failed to recover (4 tested) ./eeh-basic.sh: 81: lspci: Input/output error ./eeh-basic.sh: 81: diff: Input/output error ./eeh-basic.sh: 82: rm: Input/output error ./eeh-basic.sh: 84: test: 3: unexpected operator With the driver failed to recovery, the system will start acting up. $ ls ls: command not found And drop into read-only state, dmesg can be found in the attachment. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1916468/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1912316] Re: log_check / kernel_tainted test from ubuntu_boot failed on Intel Cloud node grumman (failed with flag 2048)
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: linux (Ubuntu Focal) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1912316 Title: log_check / kernel_tainted test from ubuntu_boot failed on Intel Cloud node grumman (failed with flag 2048) Status in ubuntu-kernel-tests: New Status in linux package in Ubuntu: Incomplete Status in linux source package in Xenial: Incomplete Status in linux source package in Bionic: Confirmed Status in linux source package in Focal: Confirmed Status in linux source package in Groovy: Confirmed Bug description: Issue found on node grumman, this is not a regression. The kernel_tainted check reports a non-zero flag 2048, this means "workaround for bug in platform firmware applied" log_check reports WARNINGs found in the dmesg: 10. 01/06 09:46:51 INFO |ubuntu_boo:0030| kernel: [ 7.852005] WARNING: CPU: 0 PID: 179 at /build/linux-0dlxvs/linux-4.4.0/drivers/dma/ioat/dca.c:342 ioat_dca_init+0x17c/0x1a0 [ioatdma]() 11. 01/06 09:46:51 INFO |ubuntu_boo:0030| kernel: [ 5.387292] WARNING: CPU: 0 PID: 181 at /build/linux-7Nk88i/linux-4.4.0/drivers/dma/ioat/dca.c:342 ioat_dca_init+0x17c/0x1a0 [ioatdma]() 12. 01/06 09:46:51 INFO |ubuntu_boo:0030| kernel: [ 6.039705] WARNING: CPU: 0 PID: 4 at /build/linux-7Nk88i/linux-4.4.0/drivers/dma/ioat/dca.c:342 ioat_dca_init+0x17c/0x1a0 [ioatdma]() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1912316/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1882503] Re: eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9
** Changed in: ubuntu-kernel-tests Status: In Progress => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1882503 Title: eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 Status in ubuntu-kernel-tests: Fix Released Status in linux package in Ubuntu: Fix Released Status in linux source package in Focal: Fix Released Status in linux source package in Groovy: Fix Released Status in linux source package in Hirsute: Fix Released Bug description: [Impact] The breakable devices test is hardware-dependent. In our test pool it will take about: * 30 seconds to run on a Power8 system that with 5 breakable devices, * 60 seconds to run on a Power9 system that with 4 breakable devices. The default 45 seconds kselftest framework timeout is not enough to allow this test to finish on some nodes. Thus causing this test to fail with TIMEOUT error. [Fix] * f5eca0b279117f ("selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic") We have this testcase since Focal, and this patch can be cherry-picked into all affected releases. [Test case] Run this test on P9 node baltar, on which this timeout issue can be 100% reproduced. With this patch applied, the test can finish without being terminated by the default timeout. [Where problems could occur] This will make test takes longer to finish, but it's still being controlled by the timeout mechanism both in the test case and kselftest framework. It's unlikely to make the test hang forever. == Original Bug Report == Issue found on 5.4.0-34.38, Focal P9 "baltar" # selftests: powerpc/eeh: eeh-basic.sh # :00:00.0, Skipped: bridge # 0001:00:00.0, Skipped: bridge # 0002:00:00.0, Skipped: bridge # 0002:01:00.0, Added # 0003:00:00.0, Skipped: bridge # 0003:01:00.0, Added # 0004:00:00.0, Skipped: bridge # 0004:01:00.0, Skipped: bridge # 0004:02:00.0, Added # 0005:00:00.0, Skipped: bridge # 0005:01:00.0, Added # 0030:00:00.0, Skipped: bridge # 0031:00:00.0, Skipped: bridge # 0032:00:00.0, Skipped: bridge # 0033:00:00.0, Skipped: bridge # Found 4 breakable devices... # Breaking 0002:01:00.0... # 0002:01:00.0, waited 0/60 # 0002:01:00.0, waited 1/60 # 0002:01:00.0, waited 2/60 # 0002:01:00.0, waited 3/60 # 0002:01:00.0, waited 4/60 # 0002:01:00.0, waited 5/60 # 0002:01:00.0, waited 6/60 # 0002:01:00.0, Recovered after 7 seconds # Breaking 0003:01:00.0... # 0003:01:00.0, waited 0/60 # 0003:01:00.0, waited 1/60 # 0003:01:00.0, waited 2/60 # 0003:01:00.0, waited 3/60 # 0003:01:00.0, waited 4/60 # 0003:01:00.0, waited 5/60 # 0003:01:00.0, waited 6/60 # 0003:01:00.0, waited 7/60 # 0003:01:00.0, waited 8/60 # 0003:01:00.0, waited 9/60 # 0003:01:00.0, waited 10/60 # 0003:01:00.0, waited 11/60 # 0003:01:00.0, waited 12/60 # 0003:01:00.0, waited 13/60 # 0003:01:00.0, waited 14/60 # 0003:01:00.0, waited 15/60 # 0003:01:00.0, waited 16/60 # 0003:01:00.0, waited 17/60 # 0003:01:00.0, waited 18/60 # 0003:01:00.0, waited 19/60 # 0003:01:00.0, waited 20/60 # 0003:01:00.0, waited 21/60 # 0003:01:00.0, waited 22/60 # 0003:01:00.0, waited 23/60 # 0003:01:00.0, waited 24/60 # 0003:01:00.0, waited 25/60 # 0003:01:00.0, waited 26/60 # 0003:01:00.0, waited 27/60 # 0003:01:00.0, waited 28/60 # 0003:01:00.0, waited 29/60 # 0003:01:00.0, waited 30/60 # 0003:01:00.0, waited 31/60 # 0003:01:00.0, waited 32/60 # 0003:01:00.0, waited 33/60 # 0003:01:00.0, waited 34/60 # 0003:01:00.0, waited 35/60 # 0003:01:00.0, Recovered after 36 seconds # Breaking 0004:02:00.0... # 0004:02:00.0, Recovered after 0 seconds # Breaking 0005:01:00.0... # 0005:01:00.0, waited 0/60 # 0005:01:00.0, waited 1/60 # not ok 1 selftests: powerpc/eeh: eeh-basic.sh # TIMEOUT To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1882503/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1912316] Re: log_check / kernel_tainted test from ubuntu_boot failed on Intel Cloud node grumman (failed with flag 2048)
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: linux (Ubuntu Groovy) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1912316 Title: log_check / kernel_tainted test from ubuntu_boot failed on Intel Cloud node grumman (failed with flag 2048) Status in ubuntu-kernel-tests: New Status in linux package in Ubuntu: Incomplete Status in linux source package in Xenial: Incomplete Status in linux source package in Bionic: Confirmed Status in linux source package in Focal: Confirmed Status in linux source package in Groovy: Confirmed Bug description: Issue found on node grumman, this is not a regression. The kernel_tainted check reports a non-zero flag 2048, this means "workaround for bug in platform firmware applied" log_check reports WARNINGs found in the dmesg: 10. 01/06 09:46:51 INFO |ubuntu_boo:0030| kernel: [ 7.852005] WARNING: CPU: 0 PID: 179 at /build/linux-0dlxvs/linux-4.4.0/drivers/dma/ioat/dca.c:342 ioat_dca_init+0x17c/0x1a0 [ioatdma]() 11. 01/06 09:46:51 INFO |ubuntu_boo:0030| kernel: [ 5.387292] WARNING: CPU: 0 PID: 181 at /build/linux-7Nk88i/linux-4.4.0/drivers/dma/ioat/dca.c:342 ioat_dca_init+0x17c/0x1a0 [ioatdma]() 12. 01/06 09:46:51 INFO |ubuntu_boo:0030| kernel: [ 6.039705] WARNING: CPU: 0 PID: 4 at /build/linux-7Nk88i/linux-4.4.0/drivers/dma/ioat/dca.c:342 ioat_dca_init+0x17c/0x1a0 [ioatdma]() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1912316/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1912316] Re: log_check / kernel_tainted test from ubuntu_boot failed on Intel Cloud node grumman (failed with flag 2048)
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: linux (Ubuntu Bionic) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1912316 Title: log_check / kernel_tainted test from ubuntu_boot failed on Intel Cloud node grumman (failed with flag 2048) Status in ubuntu-kernel-tests: New Status in linux package in Ubuntu: Incomplete Status in linux source package in Xenial: Incomplete Status in linux source package in Bionic: Confirmed Status in linux source package in Focal: Confirmed Status in linux source package in Groovy: Confirmed Bug description: Issue found on node grumman, this is not a regression. The kernel_tainted check reports a non-zero flag 2048, this means "workaround for bug in platform firmware applied" log_check reports WARNINGs found in the dmesg: 10. 01/06 09:46:51 INFO |ubuntu_boo:0030| kernel: [ 7.852005] WARNING: CPU: 0 PID: 179 at /build/linux-0dlxvs/linux-4.4.0/drivers/dma/ioat/dca.c:342 ioat_dca_init+0x17c/0x1a0 [ioatdma]() 11. 01/06 09:46:51 INFO |ubuntu_boo:0030| kernel: [ 5.387292] WARNING: CPU: 0 PID: 181 at /build/linux-7Nk88i/linux-4.4.0/drivers/dma/ioat/dca.c:342 ioat_dca_init+0x17c/0x1a0 [ioatdma]() 12. 01/06 09:46:51 INFO |ubuntu_boo:0030| kernel: [ 6.039705] WARNING: CPU: 0 PID: 4 at /build/linux-7Nk88i/linux-4.4.0/drivers/dma/ioat/dca.c:342 ioat_dca_init+0x17c/0x1a0 [ioatdma]() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1912316/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1914411] Re: Fix broken efifb on graphics device without driver
https://cgit.freedesktop.org/drm/drm- misc/commit/?id=a6c0fd3d5a8bac08b0d79301be23f961e9038d60 in drm-misc- next the day before yesterday. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1914411 Title: Fix broken efifb on graphics device without driver Status in HWE Next: New Status in linux package in Ubuntu: In Progress Status in linux-oem-5.10 package in Ubuntu: New Status in linux source package in Focal: In Progress Status in linux-oem-5.10 source package in Focal: New Status in linux source package in Groovy: In Progress Status in linux-oem-5.10 source package in Groovy: New Bug description: [Impact] EFIFB stops working after graphics device is runtime suspended in D3cold. [Fix] Prevent the graphics device from being runtime suspended. [Test] With the patch applied, using efifb on graphics device without driver always work, because the device stays at D0 all the time. [Where problems could occur] Potentially this can affect power consumption, if user expects to put graphics device to D3cold, and is fine to get a broken efifb. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1914411/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1914411] Re: Fix broken efifb on graphics device without driver
https://lore.kernel.org/linux- fbdev/20210129084327.986630-1-kai.heng.f...@canonical.com/ -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1914411 Title: Fix broken efifb on graphics device without driver Status in HWE Next: New Status in linux package in Ubuntu: In Progress Status in linux-oem-5.10 package in Ubuntu: New Status in linux source package in Focal: In Progress Status in linux-oem-5.10 source package in Focal: New Status in linux source package in Groovy: In Progress Status in linux-oem-5.10 source package in Groovy: New Bug description: [Impact] EFIFB stops working after graphics device is runtime suspended in D3cold. [Fix] Prevent the graphics device from being runtime suspended. [Test] With the patch applied, using efifb on graphics device without driver always work, because the device stays at D0 all the time. [Where problems could occur] Potentially this can affect power consumption, if user expects to put graphics device to D3cold, and is fine to get a broken efifb. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1914411/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1914411] Re: Fix broken efifb on graphics device without driver
SRU: https://lists.ubuntu.com/archives/kernel- team/2021-February/117003.html Currently NAK-ed for F/G for it's not yet in linux-next, but oem-5.10/U is open for further decision. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1914411 Title: Fix broken efifb on graphics device without driver Status in HWE Next: New Status in linux package in Ubuntu: In Progress Status in linux-oem-5.10 package in Ubuntu: New Status in linux source package in Focal: In Progress Status in linux-oem-5.10 source package in Focal: New Status in linux source package in Groovy: In Progress Status in linux-oem-5.10 source package in Groovy: New Bug description: [Impact] EFIFB stops working after graphics device is runtime suspended in D3cold. [Fix] Prevent the graphics device from being runtime suspended. [Test] With the patch applied, using efifb on graphics device without driver always work, because the device stays at D0 all the time. [Where problems could occur] Potentially this can affect power consumption, if user expects to put graphics device to D3cold, and is fine to get a broken efifb. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1914411/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1879633] Re: Killer 500s (QCA6390) WLAN/BT [17cb:1101] unavailable
@Patricio, updated in the beginning of the bug description :) ** Description changed: TL;DR To bring up QCA6390, aka. AX500s, on Ubuntu 20.04 Focal, please first update your system BIOS to the latest version available. And then you will need both kernel (either oem-5.6, or oem-5.10, or generic-5.11) and firmware with ath11k support: [kernel] 1. oem-5.6 >= 5.6.0-1039.43 - $ sudo apt-get install linux-oem-20.04 + $ sudo apt-get install linux-oem-20.04 - linux-oem-20.04 meta package may upgrade to v5.10 soon, but it will + linux-oem-20.04 meta package may upgrade to v5.10 soon, but it will still support ath11k. 2. oem-5.10 >= 5.10.0-1010.11 (recommended) - $ sudo apt-get install linux-oem-20.04b + $ sudo apt-get install linux-oem-20.04b - This meta package may cease to exist after 5.10 oem kernel transition. + This meta package may cease to exist after 5.10 oem kernel transition. Use linux-oem-20.04 then. 3. linux-generic-5.11 - $ sudo apt-add-repository ppa:canonical-kernel-team/bootstrap - $ sudo sed -e 's,focal,devel,' -i /etc/apt/sources.list.d/ppa-canonical-kernel-team-ubuntu-bootstrap-focal.list - $ sudo mv /etc/apt/sources.list.d/ppa-canonical-kernel-team-ubuntu-bootstrap-focal.list /etc/apt/sources.list.d/ppa-canonical-kernel-team-ubuntu-bootstrap-devel.list - $ sudo apt-get update - $ sudo apt-get install $(apt-cache search linux-modules-extra-5.11 | awk '{print $1}') + # Enable ppa:canonical-kernel-team/bootstrap for Hirsute: + $ sudo apt-add-repository ppa:canonical-kernel-team/bootstrap + $ sudo sed -e 's,focal,devel,' -i /etc/apt/sources.list.d/ppa-canonical-kernel-team-ubuntu-bootstrap-focal.list + $ sudo mv /etc/apt/sources.list.d/ppa-canonical-kernel-team-ubuntu-bootstrap-focal.list /etc/apt/sources.list.d/ppa-canonical-kernel-team-ubuntu-bootstrap-devel.list + + $ sudo apt-get update + $ sudo apt-get install $(apt-cache search linux-modules-extra-5.11 | awk '{print $1}') + + # Then rename the list to prevent unexpected upgrades: + $ sudo mv /etc/apt/sources.list.d/ppa-canonical-kernel-team-ubuntu-bootstrap-devel.list /etc/apt/sources.list.d/ppa-canonical-kernel-team-ubuntu-bootstrap-devel.list_ + $ sudo apt update [firmware] Version 1.187.7 or newer is needed. So just do: - $ sudo apt-get install linux-firmware + $ sudo apt-get install linux-firmware Then reboot and check if wireless is now working. If doesn't, please file a new bug instead. == previous SRU justification header == [SRU Justification: oem-5.6] [Impact] Qualcomm QCA6390 series not recognized due to the lack of ath11k and all its prerequisite drivers. $ lspci :55:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:1101] Subsystem: Bigfoot Networks, Inc. Device [1a56:a501] [Fix] Tag ath11k-qca6390-bringup-202011301608 from ath tree (https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git) marks first stable milestone on the platform/device under development since v5.6-rc1. Most of the commits under this tag, ~350 commits, have been in vanilla kernel v5.10-rc4 except those starting from commit 065c9528cc50 ("ath11k: add 64bit check before reading msi high addr"). While ath11k depends on MHI bus, qrtr and qmi helpers, changes falling in these components are also pulled. Besides, tx encapsulation https://lore.kernel.org/linux-wireless/20200908123702.88454-1-...@nbd.name/ and a couple more inclusive of 6 GHz capability, BSS Color were also pulled to satisfy API changes in mac80211/cfg80211. [Test Case] 1. Install firmwares & boot from patched kernel, 2. ath11k should be now up and running. Check with `sudo dmesg | grep ath11k` While this is going to bring massive changes to the kernel, as well as shared wireless stack that is not only used by ath11k but also many others, prebuilt kernel/firmware packages were deployed on platforms with and without ath11k for regression tests, and so far the results are positive. [Where problems could occur] ath11k and its relying parts have never been enabled in oem-5.6, so changes to them should have little effect on most platforms. For platforms equip QCA6390, this will be the first time they're probed and enabled, and as the driver is still under polishing, there can be regressions, performance lost, power consumption increase at this moment. Changes to wireless stack could also be an issue as this introduces interface changes to the API, so maybe DKMS packages in the wild will be affected. == SRU for U/OEM-5.10 == [SRU Justification: U/OEM-5.10] [Impact] Qualcomm QCA6390 series not recognized due to the lack of ath11k driver. $ lspci :55:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:1101] Subsystem: Bigfoot Networks, Inc. Device [1a56:a501] [Fix]
[Kernel-packages] [Bug 1879633] Re: Killer 500s (QCA6390) WLAN/BT [17cb:1101] unavailable
** Description changed: + TL;DR + + To bring up QCA6390, aka. AX500s, on Ubuntu 20.04 Focal, please first + update your system BIOS to the latest version available. + + And then you will need both kernel (either oem-5.6, or oem-5.10, or + generic-5.11) and firmware with ath11k support: + + [kernel] + + 1. oem-5.6 >= 5.6.0-1039.43 + + $ sudo apt-get install linux-oem-20.04 + + linux-oem-20.04 meta package may upgrade to v5.10 soon, but it will + still support ath11k. + + 2. oem-5.10 >= 5.10.0-1010.11 (recommended) + + $ sudo apt-get install linux-oem-20.04b + + This meta package may cease to exist after 5.10 oem kernel transition. + Use linux-oem-20.04 then. + + 3. linux-generic-5.11 + + $ sudo apt-add-repository ppa:canonical-kernel-team/bootstrap + $ sudo sed -e 's,focal,devel,' -i /etc/apt/sources.list.d/ppa-canonical-kernel-team-ubuntu-bootstrap-focal.list + $ sudo mv /etc/apt/sources.list.d/ppa-canonical-kernel-team-ubuntu-bootstrap-focal.list /etc/apt/sources.list.d/ppa-canonical-kernel-team-ubuntu-bootstrap-devel.list + $ sudo apt-get update + $ sudo apt-get install $(apt-cache search linux-modules-extra-5.11 | awk '{print $1}') + + [firmware] + + Version 1.187.7 or newer is needed. So just do: + + $ sudo apt-get install linux-firmware + + Then reboot and check if wireless is now working. If doesn't, please + file a new bug instead. + + == previous SRU justification header == + [SRU Justification: oem-5.6] [Impact] Qualcomm QCA6390 series not recognized due to the lack of ath11k and all its prerequisite drivers. $ lspci :55:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:1101] - Subsystem: Bigfoot Networks, Inc. Device [1a56:a501] + Subsystem: Bigfoot Networks, Inc. Device [1a56:a501] [Fix] Tag ath11k-qca6390-bringup-202011301608 from ath tree (https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git) marks first stable milestone on the platform/device under development since v5.6-rc1. Most of the commits under this tag, ~350 commits, have been in vanilla kernel v5.10-rc4 except those starting from commit 065c9528cc50 ("ath11k: add 64bit check before reading msi high addr"). While ath11k depends on MHI bus, qrtr and qmi helpers, changes falling in these components are also pulled. Besides, tx encapsulation https://lore.kernel.org/linux-wireless/20200908123702.88454-1-...@nbd.name/ and a couple more inclusive of 6 GHz capability, BSS Color were also pulled to satisfy API changes in mac80211/cfg80211. [Test Case] 1. Install firmwares & boot from patched kernel, 2. ath11k should be now up and running. Check with -`sudo dmesg | grep ath11k` + `sudo dmesg | grep ath11k` While this is going to bring massive changes to the kernel, as well as shared wireless stack that is not only used by ath11k but also many others, prebuilt kernel/firmware packages were deployed on platforms with and without ath11k for regression tests, and so far the results are positive. [Where problems could occur] ath11k and its relying parts have never been enabled in oem-5.6, so changes to them should have little effect on most platforms. For platforms equip QCA6390, this will be the first time they're probed and enabled, and as the driver is still under polishing, there can be regressions, performance lost, power consumption increase at this moment. Changes to wireless stack could also be an issue as this introduces interface changes to the API, so maybe DKMS packages in the wild will be affected. == SRU for U/OEM-5.10 == [SRU Justification: U/OEM-5.10] [Impact] Qualcomm QCA6390 series not recognized due to the lack of ath11k driver. $ lspci :55:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:1101] Subsystem: Bigfoot Networks, Inc. Device [1a56:a501] [Fix] 25 additional fixes in ath tree (https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git), tag ath11k-qca6390-bringup-202011301608 to resolve issues on TGL platforms, and firmware updates from mainline are required. [Test Case] 1. Install firmwares & boot from patched kernel, 2. ath11k should be now up and running. Check with `sudo dmesg | grep ath11k` [Where problems could occur] There has been a lot patches landed in kernel since 5.7 devel cycle. The last bits here has merge base with mainline at v5.10-rc4, and since then only patches for ath11k itself has been committed. == Original Bug Description == Qualcomm QCA6390 series not recognized due to the lack of ath11k driver. :55:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:1101] Subsystem: Bigfoot Networks, Inc. Device [1a56:a501] Depending on bug 1891632 to fix Wi-Fi dead after resumed from suspend. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64
[Kernel-packages] [Bug 1810183] Re: numpad on touchpad doesn't work in ASUS Zenbook 14
So sad, Asus doesn't care about linux users, that's the reality ... Our only hope is a community developed driver for this feature. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1810183 Title: numpad on touchpad doesn't work in ASUS Zenbook 14 Status in Linux: New Status in linux package in Ubuntu: Confirmed Bug description: I have Asus Zenbook 14 UX433FA which I have installed Ubuntu 18.10 alongside windows 10. The numeric keypads are within the touchpad and are supposed to be turned on by a button on the touchpad. This works well in Windows but doesn't work in Ubuntu. I have tried to search for any related problems/solutions online but I haven't been able to. I will appreciate any suggestion or help. Thanks, --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu13.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.10 InstallationDate: Installed on 2018-12-30 (4 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) Package: linux (not installed) Tags: cosmic Uname: Linux 4.19.11-041911-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu13.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 18.10 InstallationDate: Installed on 2018-12-30 (4 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) Package: linux (not installed) Tags: cosmic Uname: Linux 4.18.10-041810-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810183/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1904249] Re: nvidia: module license 'NVIDIA' taints kernel
@Peter, please file a new bug instead as this one is about thermal control and has expired. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1904249 Title: nvidia: module license 'NVIDIA' taints kernel Status in linux package in Ubuntu: Expired Bug description: The nvidia module is not loaded properly on kernel 5.8 which is causing the fan/thermals to go crazy. This only happens when running on Nvidia and Ondemand. No issues on Intel graphics. The error goes away on kernel 5.4 Ubuntu 20.04 Nvidia 450.80.02 5.8.0-28-generic $ dmesg | grep nvidia [1.159145] nvidia-gpu :01:00.3: enabling device ( -> 0002) [3.446992] nvidia: loading out-of-tree module taints kernel. [3.447002] nvidia: module license 'NVIDIA' taints kernel. [3.482650] nvidia-nvlink: Nvlink Core is being initialized, major device number 511 [3.483217] nvidia :01:00.0: enabling device (0006 -> 0007) [3.483347] nvidia :01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none [3.618157] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 450.80.02 Wed Sep 23 00:48:09 UTC 2020 [3.630548] [drm] [nvidia-drm] [GPU ID 0x0100] Loading driver [3.630551] [drm] Initialized nvidia-drm 0.0.0 20160202 for :01:00.0 on minor 1 [3.662490] audit: type=1400 audit(1605307253.247:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=690 comm="apparmor_parser" [3.664545] audit: type=1400 audit(1605307253.247:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=690 comm="apparmor_parser" [3.701059] nvidia_uvm: module verification failed: signature and/or required key missing - tainting kernel [3.706629] nvidia-uvm: Loaded the UVM driver, major device number 509. [4.225159] nvidia-gpu :01:00.3: i2c timeout error e000 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1904249/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1909352] Re: [nvidia] (1) video hangs or (2) screen goes blank and case fan turns on
Thank you for taking the time to report this bug and helping to make Ubuntu better. It sounds like some part of the system has crashed. To help us find the cause of the crash please follow these steps: 1. Look in /var/crash for crash files and if found run: ubuntu-bug YOURFILE.crash Then tell us the ID of the newly-created bug. 2. If step 1 failed then look at https://errors.ubuntu.com/user/ID where ID is the content of file /var/lib/whoopsie/whoopsie-id on the machine. Do you find any links to recent problems on that page? If so then please send the links to us. 3. If step 2 also failed then apply the workaround from bug 994921, reboot, reproduce the crash, and retry step 1. Please take care to avoid attaching .crash files to bugs as we are unable to process them as file attachments. It would also be a security risk for yourself. ** Also affects: nvidia-graphics-drivers-460 (Ubuntu) Importance: Undecided Status: New ** Changed in: nvidia-graphics-drivers-460 (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-455 in Ubuntu. https://bugs.launchpad.net/bugs/1909352 Title: [nvidia] (1) video hangs or (2) screen goes blank and case fan turns on Status in nvidia-graphics-drivers-455 package in Ubuntu: Incomplete Status in nvidia-graphics-drivers-460 package in Ubuntu: Incomplete Bug description: Recover system by press and release reset switch. Log in again. Had these issues with Ubuntu 18.04. Updated to Nvidia drivers and issues resolved. Updated to 20.04.1 and issues have returned. Checked and see that Nvidia drivers newer than those packaged for use. Available at Nvidia / Newest package and in use: GeForce Game Ready Driver LINUX X64 (AMD64/EM64T) DISPLAY DRIVER Driver Version: 455.45 - Release Date: Tue Nov 17, 2020 GeForce Game Ready Driver LINUX X64 (AMD64/EM64T) DISPLAY DRIVER Driver Version: 455.38 - Release Date: Thu Oct 29, 2020 Hopefully the command ubuntu-bug xorg attached all the information you may need. $ lsb_release -rd Description: Ubuntu 20.04.1 LTS Release: 20.04 ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-58.64-generic 5.4.73 Uname: Linux 5.4.0-58-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.capabilities.gpu0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/capabilities/gpu0' .proc.driver.nvidia.capabilities.mig: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/capabilities/mig' .proc.driver.nvidia.gpus..09.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/:09:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 455.38 Thu Oct 22 06:06:59 UTC 2020 GCC version: gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04) .tmp.unity_support_test.0: ApportVersion: 2.20.11-0ubuntu27.13 Architecture: amd64 CasperMD5CheckResult: skip CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sat Dec 26 09:54:40 2020 DistUpgraded: 2020-10-02 13:11:28,665 DEBUG icon theme changed, re-reading DistroCodename: focal DistroVariant: ubuntu DkmsStatus: nvidia, 455.38, 5.4.0-56-generic, x86_64: installed nvidia, 455.38, 5.4.0-58-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation GP107 [GeForce GTX 1050] [10de:1c81] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GP107 [GeForce GTX 1050] [3842:6150] InstallationDate: Installed on 2018-03-03 (1029 days ago) InstallationMedia: Ubuntu 16.04.4 LTS "Xenial Xerus" - Release amd64 (20180228) MachineType: Gigabyte Technology Co., Ltd. AB350-Gaming 3 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-58-generic root=UUID=fc7c6eeb-fbb0-4f6c-8815-349d9ff6efd6 ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: Upgraded to focal on 2020-10-02 (84 days ago) dmi.bios.date: 08/18/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F8 dmi.board.asset.tag: Default string dmi.board.name: AB350-Gaming 3-CF dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF8:bd08/18/2017:svnGigabyteTechnologyCo.,Ltd.:pnAB350-Gaming3:pvrDefaultstring:rvnGigabyteTechnologyCo.,Ltd.:rnAB350-Gaming3-CF:rvrx.x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family:
[Kernel-packages] [Bug 1904249] Re: nvidia: module license 'NVIDIA' taints kernel
I have NVIDIA Driver Version: 460.32.03 installed, and have had display and font issues $ dmesg | grep nvidia [0.805138] nvidia: loading out-of-tree module taints kernel. [0.805151] nvidia: module license 'NVIDIA' taints kernel. [0.836165] nvidia: module verification failed: signature and/or required key missing - tainting kernel [0.848083] nvidia-nvlink: Nvlink Core is being initialized, major device number 238 [0.966956] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 460.32.03 Sun Dec 27 18:51:11 UTC 2020 [0.968185] [drm] [nvidia-drm] [GPU ID 0x0800] Loading driver [0.968187] [drm] Initialized nvidia-drm 0.0.0 20160202 for :08:00.0 on minor 1 [ 12.317149] nvidia-uvm: Loaded the UVM driver, major device number 235. [ 42.863316] caller os_map_kernel_space.part.0+0x77/0xa0 [nvidia] mapping multiple BARs [ 7858.114245] nvidia :08:00.0: Enabling HDA controller -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1904249 Title: nvidia: module license 'NVIDIA' taints kernel Status in linux package in Ubuntu: Expired Bug description: The nvidia module is not loaded properly on kernel 5.8 which is causing the fan/thermals to go crazy. This only happens when running on Nvidia and Ondemand. No issues on Intel graphics. The error goes away on kernel 5.4 Ubuntu 20.04 Nvidia 450.80.02 5.8.0-28-generic $ dmesg | grep nvidia [1.159145] nvidia-gpu :01:00.3: enabling device ( -> 0002) [3.446992] nvidia: loading out-of-tree module taints kernel. [3.447002] nvidia: module license 'NVIDIA' taints kernel. [3.482650] nvidia-nvlink: Nvlink Core is being initialized, major device number 511 [3.483217] nvidia :01:00.0: enabling device (0006 -> 0007) [3.483347] nvidia :01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none [3.618157] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 450.80.02 Wed Sep 23 00:48:09 UTC 2020 [3.630548] [drm] [nvidia-drm] [GPU ID 0x0100] Loading driver [3.630551] [drm] Initialized nvidia-drm 0.0.0 20160202 for :01:00.0 on minor 1 [3.662490] audit: type=1400 audit(1605307253.247:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=690 comm="apparmor_parser" [3.664545] audit: type=1400 audit(1605307253.247:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=690 comm="apparmor_parser" [3.701059] nvidia_uvm: module verification failed: signature and/or required key missing - tainting kernel [3.706629] nvidia-uvm: Loaded the UVM driver, major device number 509. [4.225159] nvidia-gpu :01:00.3: i2c timeout error e000 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1904249/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1911055] Re: [modeset][nvidia] suspend/resume broken in nvidia-460 : Display engine push buffer channel allocation failed
I'm getting a "kernel taint" message with Nvidia-460 ; not sure if it is related to this bug, reference https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1904249/comments/3 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-460 in Ubuntu. https://bugs.launchpad.net/bugs/1911055 Title: [modeset][nvidia] suspend/resume broken in nvidia-460 : Display engine push buffer channel allocation failed Status in nvidia-graphics-drivers-460 package in Ubuntu: Confirmed Bug description: After a recent update to nvidia-460, suspend then resume results in a black screen, then a hang for around 120 seconds, and then the text: nvidia-modeset: ERROR: GPU:0: Display engine push buffer channel allocation failed: 0x65 (Call timed out [NV_ERR_TIMEOUT]) nvidia-modeset: ERROR: GPU:0: Failed to allocate display engine core DMA push buffer nvidia-modeset: ERROR: GPU:0: Display engine push buffer channel allocation failed: 0x65 (Call timed out [NV_ERR_TIMEOUT]) nvidia-modeset: ERROR: GPU:0: Failed to allocate display engine core DMA push buffer dmesg shows: [ 188.352670] ACPI: Waking up from system sleep state S3 ... [ 309.142164] nvidia-modeset: ERROR: GPU:0: Display engine push buffer channel allocation failed: 0x65 (Call timed out [NV_ERR_TIMEOUT]) [ 309.142319] nvidia-modeset: ERROR: GPU:0: Failed to allocate display engine core DMA push buffer [ 313.142165] nvidia-modeset: ERROR: GPU:0: Display engine push buffer channel allocation failed: 0x65 (Call timed out [NV_ERR_TIMEOUT]) [ 313.142348] nvidia-modeset: ERROR: GPU:0: Failed to allocate display engine core DMA push buffer [ 313.151885] acpi LNXPOWER:08: Turning OFF [ 313.151898] acpi LNXPOWER:04: Turning OFF [ 313.152351] acpi LNXPOWER:03: Turning OFF [ 313.153064] acpi LNXPOWER:02: Turning OFF ... [ 325.010192] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device DELL 2209WA (HDMI-0) [ 325.010577] BUG: kernel NULL pointer dereference, address: 0050 [ 325.010579] #PF: supervisor read access in kernel mode [ 325.010580] #PF: error_code(0x) - not-present page [ 325.010580] PGD 0 P4D 0 [ 325.010582] Oops: [#1] SMP PTI [ 325.010583] CPU: 9 PID: 2247 Comm: Xorg Tainted: P O 5.4.0-60-generic #67-Ubuntu [ 325.010584] Hardware name: Razer Blade/DANA_MB, BIOS 01.01 08/31/2018 [ 325.010595] RIP: 0010:_nv000112kms+0xd/0x30 [nvidia_modeset] [ 325.010596] Code: 16 00 74 06 83 7e 0c 02 77 03 31 c0 c3 c7 46 0c 01 00 00 00 b8 01 00 00 00 c3 0f 1f 00 0f b7 46 04 0f b7 56 08 39 d0 0f 47 c2 <3b> 47 18 77 06 83 7e 10 02 77 08 31 c0 c3 0f 1f 44 00 00 c7 46 10 [ 325.010597] RSP: 0018:b89542e5b8a8 EFLAGS: 00010246 [ 325.010598] RAX: 0280 RBX: 0038 RCX: 03ff [ 325.010598] RDX: 0280 RSI: b89542e5bba0 RDI: 0038 [ 325.010599] RBP: b89542e5b9c8 R08: R09: c379e440 [ 325.010600] R10: R11: R12: b89542e5b948 [ 325.010600] R13: b89542e5b948 R14: b89542e5b930 R15: c3a50e60 [ 325.010601] FS: 7feb4c09ea80() GS:8e46ada4() knlGS: [ 325.010602] CS: 0010 DS: ES: CR0: 80050033 [ 325.010602] CR2: 0050 CR3: 0004772e2006 CR4: 003606e0 [ 325.010603] Call Trace: [ 325.010610] ? _nv002768kms+0x96/0xd0 [nvidia_modeset] [ 325.010616] ? _nv002328kms+0xb5/0x110 [nvidia_modeset] [ 325.010624] ? _nv000742kms+0x168/0x370 [nvidia_modeset] [ 325.010823] ? _nv036002rm+0x62/0x70 [nvidia] [ 325.010910] ? os_get_current_tick+0x2c/0x50 [nvidia] [ 325.010921] ? _nv002771kms+0x433/0x600 [nvidia_modeset] [ 325.010928] ? _nv002771kms+0x3fc/0x600 [nvidia_modeset] [ 325.010930] ? __schedule+0x2eb/0x740 [ 325.010935] ? _nv000742kms+0x40/0x40 [nvidia_modeset] [ 325.010939] ? nvkms_alloc+0x6a/0xa0 [nvidia_modeset] [ 325.010944] ? _nv000742kms+0x40/0x40 [nvidia_modeset] [ 325.010948] ? _nv000744kms+0x2a/0x40 [nvidia_modeset] [ 325.010952] ? nvKmsIoctl+0x96/0x1d0 [nvidia_modeset] [ 325.010957] ? nvkms_ioctl_common+0x42/0x80 [nvidia_modeset] [ 325.010961] ? nvkms_ioctl+0xc4/0x100 [nvidia_modeset] [ 325.011016] ? nvidia_frontend_unlocked_ioctl+0x3b/0x50 [nvidia] [ 325.011017] ? do_vfs_ioctl+0x407/0x670 [ 325.011019] ? do_user_addr_fault+0x216/0x450 [ 325.011020] ? ksys_ioctl+0x67/0x90 [ 325.011021] ? __x64_sys_ioctl+0x1a/0x20 [ 325.011023] ? do_syscall_64+0x57/0x190 [ 325.011024] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 325.011025] Modules linked in: rfcomm ccm aufs overlay cmac algif_hash algif_skcipher af_alg bnep snd_sof_pci snd_sof_intel_hda_common nvidia_uvm(O) snd_soc_hdac_hda snd_sof_intel_hda snd_sof_intel_byt snd_sof_intel_ipc snd_sof
[Kernel-packages] [Bug 1916570] Re: BlueZ 5.56 release
Yeah. I have merged with Debian in the past but not recently. Unfortunately this one needs to be released quickly for feature freeze tomorrow. So I have no plans to merge with Debian till at least next cycle. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1916570 Title: BlueZ 5.56 release Status in bluez package in Ubuntu: In Progress Bug description: BlueZ 5.56 is now available: https://mirrors.edge.kernel.org/pub/linux/bluetooth/ ver 5.56: Fix issue with setting AVDTP disconnect timer. Fix issue with AVDTP not sending GetCapabilities. Fix issue with AVDTP connecting using streaming mode. Fix issue with handling A2DP and remote SEP disappearing. Fix issue with handling session of A2DP channels. Fix issue with GATT and handling device removal. Fix issue with GATT not accepting multiple requests. Fix issue with HID report value callback registration. Add support for new advertising management command. Add support for battery D-Bus interface. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1916570/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1909352] Re: [nvidia] (1) video hangs or (2) screen goes blank and case fan turns on
Journal file delayed because email went to "Promotions". Just saw it today. ** Attachment added: "journalctl -b0 > journal.txt" https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-455/+bug/1909352/+attachment/5466347/+files/journal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-455 in Ubuntu. https://bugs.launchpad.net/bugs/1909352 Title: [nvidia] (1) video hangs or (2) screen goes blank and case fan turns on Status in nvidia-graphics-drivers-455 package in Ubuntu: Incomplete Bug description: Recover system by press and release reset switch. Log in again. Had these issues with Ubuntu 18.04. Updated to Nvidia drivers and issues resolved. Updated to 20.04.1 and issues have returned. Checked and see that Nvidia drivers newer than those packaged for use. Available at Nvidia / Newest package and in use: GeForce Game Ready Driver LINUX X64 (AMD64/EM64T) DISPLAY DRIVER Driver Version: 455.45 - Release Date: Tue Nov 17, 2020 GeForce Game Ready Driver LINUX X64 (AMD64/EM64T) DISPLAY DRIVER Driver Version: 455.38 - Release Date: Thu Oct 29, 2020 Hopefully the command ubuntu-bug xorg attached all the information you may need. $ lsb_release -rd Description: Ubuntu 20.04.1 LTS Release: 20.04 ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-58.64-generic 5.4.73 Uname: Linux 5.4.0-58-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.capabilities.gpu0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/capabilities/gpu0' .proc.driver.nvidia.capabilities.mig: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/capabilities/mig' .proc.driver.nvidia.gpus..09.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/:09:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 455.38 Thu Oct 22 06:06:59 UTC 2020 GCC version: gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04) .tmp.unity_support_test.0: ApportVersion: 2.20.11-0ubuntu27.13 Architecture: amd64 CasperMD5CheckResult: skip CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sat Dec 26 09:54:40 2020 DistUpgraded: 2020-10-02 13:11:28,665 DEBUG icon theme changed, re-reading DistroCodename: focal DistroVariant: ubuntu DkmsStatus: nvidia, 455.38, 5.4.0-56-generic, x86_64: installed nvidia, 455.38, 5.4.0-58-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation GP107 [GeForce GTX 1050] [10de:1c81] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. GP107 [GeForce GTX 1050] [3842:6150] InstallationDate: Installed on 2018-03-03 (1029 days ago) InstallationMedia: Ubuntu 16.04.4 LTS "Xenial Xerus" - Release amd64 (20180228) MachineType: Gigabyte Technology Co., Ltd. AB350-Gaming 3 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-58-generic root=UUID=fc7c6eeb-fbb0-4f6c-8815-349d9ff6efd6 ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: Upgraded to focal on 2020-10-02 (84 days ago) dmi.bios.date: 08/18/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F8 dmi.board.asset.tag: Default string dmi.board.name: AB350-Gaming 3-CF dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF8:bd08/18/2017:svnGigabyteTechnologyCo.,Ltd.:pnAB350-Gaming3:pvrDefaultstring:rvnGigabyteTechnologyCo.,Ltd.:rnAB350-Gaming3-CF:rvrx.x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string dmi.product.name: AB350-Gaming 3 dmi.product.sku: Default string dmi.product.version: Default string dmi.sys.vendor: Gigabyte Technology Co., Ltd. version.compiz: compiz 1:0.9.14.1+20.04.20200211-0ubuntu1 version.libdrm2: libdrm2 2.4.101-2 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.8-0ubuntu1~20.04.1 version.libgl1-mesa-glx: libgl1-mesa-glx 20.0.8-0ubuntu1~20.04.1 version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2.6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.6-1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 xserver.bootTime:
[Kernel-packages] [Bug 1915276] Re: Touchpad not working
It seemed you have a typo (it's hwe, not hew) Or you can try oem kernel: https://wiki.ubuntu.com/Kernel/OEMKernel -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1915276 Title: Touchpad not working Status in linux package in Ubuntu: Confirmed Bug description: I have recently switched to Ubuntu from Windows 10 but during and after the installation the touchpad is unresponsive at all. I have tried almost all the things from google but nothing works. I hope this issue might get resolved soon. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-65-generic 5.4.0-65.73 ProcVersionSignature: Ubuntu 5.4.0-65.73-generic 5.4.78 Uname: Linux 5.4.0-65-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.16 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: neutrino 1440 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed Feb 10 19:16:29 2021 InstallationDate: Installed on 2021-02-10 (0 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 5986:1135 Acer, Inc Integrated Camera Bus 001 Device 002: ID 0250:3412 Genius Wireless Mouse Bus 001 Device 004: ID 8087:0aaa Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: LENOVO 82C5 ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-65-generic root=UUID=e14254b4-ac0f-4e72-8e11-a450ac37103c ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-65-generic N/A linux-backports-modules-5.4.0-65-generic N/A linux-firmware1.187.9 SourcePackage: linux UpgradeStatus: Upgraded to focal on 2021-02-10 (0 days ago) dmi.bios.date: 07/22/2020 dmi.bios.vendor: LENOVO dmi.bios.version: DKCN48WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0Q55722 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo V15-IIL dmi.modalias: dmi:bvnLENOVO:bvrDKCN48WW:bd07/22/2020:svnLENOVO:pn82C5:pvrLenovoV15-IIL:rvnLENOVO:rnLNVNB161216:rvrSDK0Q55722WIN:cvnLENOVO:ct10:cvrLenovoV15-IIL: dmi.product.family: V15-IIL dmi.product.name: 82C5 dmi.product.sku: LENOVO_MT_82C5_BU_idea_FM_V15-IIL dmi.product.version: Lenovo V15-IIL dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1915276/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1916612] Re: My touchpad stopped working
Thanks for clarifying. Let me set it to invalid. ** Changed in: linux (Ubuntu) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1916612 Title: My touchpad stopped working Status in linux package in Ubuntu: Invalid Bug description: // IT WAS AN EASY FIX, BUG PROLLY NOT WORTH CHECKING OUT I was checking out different ttys by pressing Ctrl+Alt+F_keys and i pressed exit once to lock back in. My touchpad stopped working so I navigated to: https://wiki.ubuntu.com/DebuggingTouchpadDetection and basically there's nothing i can do except filing a report to you guys: I attached my /proc/bus/input/devices file. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1916612/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1879633] Re: Killer 500s (QCA6390) WLAN/BT [17cb:1101] unavailable
Hi You-Sheng Yang, first of all, thank you for your hard work on this issue. Now that this fix has been released, could you tell me what is the procedure to get the ax500 wifi working on a Dell XPS 9310 with ubuntu 20.04? It is hard to make out a definitive guide from a conversation this big. Thanks, have a nice day. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1879633 Title: Killer 500s (QCA6390) WLAN/BT [17cb:1101] unavailable Status in HWE Next: New Status in linux package in Ubuntu: Fix Released Status in linux-firmware package in Ubuntu: Invalid Status in linux-oem-5.10 package in Ubuntu: Invalid Status in linux-oem-5.6 package in Ubuntu: Invalid Status in linux source package in Focal: Won't Fix Status in linux-firmware source package in Focal: Fix Released Status in linux-oem-5.10 source package in Focal: Fix Released Status in linux-oem-5.6 source package in Focal: Fix Released Status in linux source package in Groovy: Won't Fix Status in linux-firmware source package in Groovy: Won't Fix Status in linux-oem-5.10 source package in Groovy: Invalid Status in linux-oem-5.6 source package in Groovy: Invalid Bug description: [SRU Justification: oem-5.6] [Impact] Qualcomm QCA6390 series not recognized due to the lack of ath11k and all its prerequisite drivers. $ lspci :55:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:1101] Subsystem: Bigfoot Networks, Inc. Device [1a56:a501] [Fix] Tag ath11k-qca6390-bringup-202011301608 from ath tree (https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git) marks first stable milestone on the platform/device under development since v5.6-rc1. Most of the commits under this tag, ~350 commits, have been in vanilla kernel v5.10-rc4 except those starting from commit 065c9528cc50 ("ath11k: add 64bit check before reading msi high addr"). While ath11k depends on MHI bus, qrtr and qmi helpers, changes falling in these components are also pulled. Besides, tx encapsulation https://lore.kernel.org/linux-wireless/20200908123702.88454-1-...@nbd.name/ and a couple more inclusive of 6 GHz capability, BSS Color were also pulled to satisfy API changes in mac80211/cfg80211. [Test Case] 1. Install firmwares & boot from patched kernel, 2. ath11k should be now up and running. Check with `sudo dmesg | grep ath11k` While this is going to bring massive changes to the kernel, as well as shared wireless stack that is not only used by ath11k but also many others, prebuilt kernel/firmware packages were deployed on platforms with and without ath11k for regression tests, and so far the results are positive. [Where problems could occur] ath11k and its relying parts have never been enabled in oem-5.6, so changes to them should have little effect on most platforms. For platforms equip QCA6390, this will be the first time they're probed and enabled, and as the driver is still under polishing, there can be regressions, performance lost, power consumption increase at this moment. Changes to wireless stack could also be an issue as this introduces interface changes to the API, so maybe DKMS packages in the wild will be affected. == SRU for U/OEM-5.10 == [SRU Justification: U/OEM-5.10] [Impact] Qualcomm QCA6390 series not recognized due to the lack of ath11k driver. $ lspci :55:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:1101] Subsystem: Bigfoot Networks, Inc. Device [1a56:a501] [Fix] 25 additional fixes in ath tree (https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git), tag ath11k-qca6390-bringup-202011301608 to resolve issues on TGL platforms, and firmware updates from mainline are required. [Test Case] 1. Install firmwares & boot from patched kernel, 2. ath11k should be now up and running. Check with `sudo dmesg | grep ath11k` [Where problems could occur] There has been a lot patches landed in kernel since 5.7 devel cycle. The last bits here has merge base with mainline at v5.10-rc4, and since then only patches for ath11k itself has been committed. == Original Bug Description == Qualcomm QCA6390 series not recognized due to the lack of ath11k driver. :55:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:1101] Subsystem: Bigfoot Networks, Inc. Device [1a56:a501] Depending on bug 1891632 to fix Wi-Fi dead after resumed from suspend. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: u 1842 F pulseaudio CasperMD5CheckResult: skip DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see
[Kernel-packages] [Bug 1916661] Re: Xenial update: v4.4.258 upstream stable release
** Changed in: linux (Ubuntu Xenial) Status: New => In Progress ** Changed in: linux (Ubuntu Xenial) Importance: Undecided => Medium ** Changed in: linux (Ubuntu Xenial) Assignee: (unassigned) => Kamal Mostafa (kamalmostafa) ** No longer affects: linux (Ubuntu) ** Description changed: + SRU Justification - SRU Justification + Impact: + The upstream process for stable tree updates is quite similar + in scope to the Ubuntu SRU process, e.g., each patch has to + demonstrably fix a bug, and each patch is vetted by upstream + by originating either directly from a mainline/stable Linux tree or + a minimally backported form of that patch. The following upstream + stable patches should be included in the Ubuntu kernel: - Impact: -The upstream process for stable tree updates is quite similar -in scope to the Ubuntu SRU process, e.g., each patch has to -demonstrably fix a bug, and each patch is vetted by upstream -by originating either directly from a mainline/stable Linux tree or -a minimally backported form of that patch. The following upstream -stable patches should be included in the Ubuntu kernel: + v4.4.258 upstream stable release + from git://git.kernel.org/ -v4.4.258 upstream stable release -from git://git.kernel.org/ + tracing: Do not count ftrace events in top level enable output + fgraph: Initialize tracing_graph_pause at task creation + af_key: relax availability checks for skb size calculation + iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmap + iwlwifi: mvm: guard against device removal in reprobe + SUNRPC: Move simple_get_bytes and simple_get_netobj into private header + SUNRPC: Handle 0 length opaque XDR object data properly + lib/string: Add strscpy_pad() function + include/trace/events/writeback.h: fix -Wstringop-truncation warnings + memcg: fix a crash in wb_workfn when a device disappears + squashfs: add more sanity checks in id lookup + squashfs: add more sanity checks in inode lookup + squashfs: add more sanity checks in xattr id lookup + memblock: do not start bottom-up allocations with kernel_end + netfilter: xt_recent: Fix attempt to update deleted entry + h8300: fix PREEMPTION build, TI_PRE_COUNT undefined + usb: dwc3: ulpi: fix checkpatch warning + usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one + net: watchdog: hold device global xmit lock during tx disable + vsock: fix locking in vsock_shutdown() + x86/build: Disable CET instrumentation in the kernel for 32-bit too + trace: Use -mcount-record for dynamic ftrace + tracing: Fix SKIP_STACK_VALIDATION=1 build due to bad merge with -mrecord-mcount + tracing: Avoid calling cc-option -mrecord-mcount for every Makefile + Xen/x86: don't bail early from clear_foreign_p2m_mapping() + Xen/x86: also check kernel mapping in set_foreign_p2m_mapping() + Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages() + Xen/gntdev: correct error checking in gntdev_map_grant_pages() + xen/arm: don't ignore return errors from set_phys_to_machine + xen-blkback: don't "handle" error by BUG() + xen-netback: don't "handle" error by BUG() + xen-scsiback: don't "handle" error by BUG() + xen-blkback: fix error handling in xen_blkbk_map() + scsi: qla2xxx: Fix crash during driver load on big endian machines + kvm: check tlbs_dirty directly + Linux 4.4.258 + UBUNTU: upstream stable to v4.4.258 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1916661 Title: Xenial update: v4.4.258 upstream stable release Status in linux source package in Xenial: In Progress Bug description: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v4.4.258 upstream stable release from git://git.kernel.org/ tracing: Do not count ftrace events in top level enable output fgraph: Initialize tracing_graph_pause at task creation af_key: relax availability checks for skb size calculation iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmap iwlwifi: mvm: guard against device removal in reprobe SUNRPC: Move simple_get_bytes and simple_get_netobj into private header SUNRPC: Handle 0 length opaque XDR object data properly lib/string: Add strscpy_pad() function include/trace/events/writeback.h: fix -Wstringop-truncation warnings memcg: fix a crash in wb_workfn when a device disappears squashfs: add more sanity checks in id lookup squashfs: add more
[Kernel-packages] [Bug 1916660] [NEW] Xenial update: v4.4.257 upstream stable release
Public bug reported: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v4.4.257 upstream stable release from git://git.kernel.org/ net_sched: reject silly cell_log in qdisc_get_rtab() futex,rt_mutex: Provide futex specific rt_mutex API futex: Remove rt_mutex_deadlock_account_*() futex: Rework inconsistent rt_mutex/futex_q state futex: Avoid violating the 10th rule of futex futex: Replace pointless printk in fixup_owner() futex: Provide and use pi_state_update_owner() rtmutex: Remove unused argument from rt_mutex_proxy_unlock() futex: Use pi_state_update_owner() in put_pi_state() futex: Simplify fixup_pi_state_owner() futex: Handle faults correctly for PI futexes usb: udc: core: Use lock when write to soft_connect scsi: libfc: Avoid invoking response handler twice if ep is already completed scsi: ibmvfc: Set default timeout to avoid crash during migration stable: clamp SUBLEVEL in 4.4 and 4.9 USB: serial: cp210x: add pid/vid for WSDA-200-USB USB: serial: cp210x: add new VID/PID for supporting Teraoka AD2000 USB: serial: option: Adding support for Cinterion MV31 net: lapb: Copy the skb before sending a packet UBUNTU: [Config] updateconfigs for ELFCORE ELF/MIPS build fix elfcore: fix building with clang USB: gadget: legacy: fix an error code in eth_bind() USB: usblp: don't call usb_set_interface if there's a single alt usb: dwc2: Fix endpoint direction check in ep_from_windex mac80211: fix station rate table updates on assoc kretprobe: Avoid re-registration of the same kretprobe earlier cifs: report error instead of invalid when revalidating a dentry fails mmc: core: Limit retries when analyse of SDIO tuples fails ARM: footbridge: fix dc21285 PCI configuration accessors mm: hugetlbfs: fix cannot migrate the fallocated HugeTLB page mm: hugetlb: fix a race between isolating and freeing page mm: hugetlb: remove VM_BUG_ON_PAGE from page_huge_active x86/build: Disable CET instrumentation in the kernel x86/apic: Add extra serialization for non-serializing MSRs Input: xpad - sync supported devices with fork on GitHub ACPI: thermal: Do not call acpi_thermal_check() directly ALSA: hda/realtek - Fix typo of pincfg for Dell quirk Linux 4.4.257 UBUNTU: upstream stable to v4.4.257 ** Affects: linux (Ubuntu Xenial) Importance: Medium Assignee: Kamal Mostafa (kamalmostafa) Status: In Progress ** Tags: kernel-stable-tracking-bug ** Changed in: linux (Ubuntu) Status: New => Confirmed ** Tags added: kernel-stable-tracking-bug ** Also affects: linux (Ubuntu Xenial) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Xenial) Status: New => In Progress ** Changed in: linux (Ubuntu Xenial) Importance: Undecided => Medium ** Changed in: linux (Ubuntu Xenial) Assignee: (unassigned) => Kamal Mostafa (kamalmostafa) ** No longer affects: linux (Ubuntu) ** Description changed: + SRU Justification - SRU Justification + Impact: + The upstream process for stable tree updates is quite similar + in scope to the Ubuntu SRU process, e.g., each patch has to + demonstrably fix a bug, and each patch is vetted by upstream + by originating either directly from a mainline/stable Linux tree or + a minimally backported form of that patch. The following upstream + stable patches should be included in the Ubuntu kernel: - Impact: -The upstream process for stable tree updates is quite similar -in scope to the Ubuntu SRU process, e.g., each patch has to -demonstrably fix a bug, and each patch is vetted by upstream -by originating either directly from a mainline/stable Linux tree or -a minimally backported form of that patch. The following upstream -stable patches should be included in the Ubuntu kernel: + v4.4.257 upstream stable release + from git://git.kernel.org/ -v4.4.257 upstream stable release -from git://git.kernel.org/ + net_sched: reject silly cell_log in qdisc_get_rtab() + futex,rt_mutex: Provide futex specific rt_mutex API + futex: Remove rt_mutex_deadlock_account_*() + futex: Rework inconsistent rt_mutex/futex_q state + futex: Avoid violating the 10th rule of futex + futex: Replace pointless printk in fixup_owner() + futex: Provide and use pi_state_update_owner() + rtmutex: Remove unused argument from rt_mutex_proxy_unlock() + futex: Use pi_state_update_owner() in put_pi_state() + futex: Simplify fixup_pi_state_owner() + futex: Handle faults correctly for PI futexes + usb: udc: core: Use lock when write to soft_connect + scsi:
[Kernel-packages] [Bug 1916661] [NEW] Xenial update: v4.4.258 upstream stable release
Public bug reported: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v4.4.258 upstream stable release from git://git.kernel.org/ ** Affects: linux (Ubuntu Xenial) Importance: Medium Assignee: Kamal Mostafa (kamalmostafa) Status: In Progress ** Tags: kernel-stable-tracking-bug ** Changed in: linux (Ubuntu) Status: New => Confirmed ** Tags added: kernel-stable-tracking-bug ** Also affects: linux (Ubuntu Xenial) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1916661 Title: Xenial update: v4.4.258 upstream stable release Status in linux source package in Xenial: In Progress Bug description: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v4.4.258 upstream stable release from git://git.kernel.org/ To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/xenial/+source/linux/+bug/1916661/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1543919] Re: Remove EISA support from main kernel image and make it M (modular)
Still an issue with latest kernel on 20.10 # uname -a Linux Workstation 5.8.0-43-generic #49-Ubuntu SMP Fri Feb 5 03:01:28 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1543919 Title: Remove EISA support from main kernel image and make it M (modular) Status in linux package in Ubuntu: Triaged Bug description: (This is a sort of RfC. ) I have a PC that still has the good old PCI ports, but I am 100% sure that the active use of EISA dates back yet more 10 years. In other words, boards that _only_ support EISA date back 25 years now, while those that provide *one* EISA slot date back roughly 15 years (one of the Elitegroup K7 series comes to mind, from about 2001/02). So the EISA support *should* be provided, as we should even support ancient hardware (Linux principle :)) However, why the EISA support is *compiled in* is beyond me. For instance, it creates lots of totally unnecessary noise in dmesg: [0.08] EISA bus registered [1.598316] platform eisa.0: Probing EISA bus 0 [1.598345] platform eisa.0: Cannot allocate resource for EISA slot 1 (repeated 10 times, i=i+1) [1.598368] platform eisa.0: EISA: Detected 0 cards For a 1997 mainboard, this would make perfect sense. But it is very probable that said mainboard would require linux-image-extra nonetheless to support some days-of-yore chipset. So why not leave it as a *module*, while removing its support from main kernel image once and for all? Your turn. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1543919/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910139] Re: Xenial update: v4.4.249 upstream stable release
This bug was fixed in the package linux - 4.4.0-203.235 --- linux (4.4.0-203.235) xenial; urgency=medium * xenial/linux: 4.4.0-203.235 -proposed tracker (LP: #1914140) * Ubuntu 16.04 kernel 4.4.0-202 basic commands hanging (LP: #1913853) - SAUCE: Revert "mm: check that mm is still valid in madvise()" linux (4.4.0-202.234) xenial; urgency=medium * xenial/linux: 4.4.0-202.234 -proposed tracker (LP: #1913086) * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * errinjct open fails on IBM POWER LPAR (LP: #1908710) - powerpc/rtas: Fix typo of ibm, open-errinjct in RTAS filter * 4.4 kernel panics in kvm wake_up() handler (LP: #1908428) - kvm: vmx: rename vmx_pre/post_block to pi_pre/post_block - KVM: VMX: extract __pi_post_block - KVM: VMX: avoid double list add with VT-d posted interrupts * restore reverted commit "crypto: arm64/sha - avoid non-standard inline asm tricks" (LP: #1907489) - crypto: arm64/sha - avoid non-standard inline asm tricks * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Xenial update: v4.4.249 upstream stable release (LP: #1910139) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - ARC: stack unwinding: don't assume non-current task is sleeping - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - [Config] updateconfigs for SPI_DYNAMIC - spi: Prevent adding devices below an unregistering controller - net/mlx4_en: Avoid scheduling restart task if it is already running - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: bridge: vlan: fix error return code in __vlan_add() - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - USB: serial: cp210x: enable usb generic throttle/unthrottle - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - dm table: Remove BUG_ON(in_interrupt()) - soc/tegra: fuse: Fix index bug in get_process_id - USB: serial: option: add interface-number sanity check to flag handling - USB: gadget: f_rndis: fix bitrate for SuperSpeed and above - usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul - media: msi2500: assign SPI bus number dynamically - Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt() - drm/gma500: fix double free of gma_connector - ARM: p2v: fix handling of LPAE translation in BE mode - crypto: talitos - Fix return type of current_desc_hdr() - spi: img-spfi: fix reference leak in img_spfi_resume - ASoC: pcm: DRAIN support reactivation - Bluetooth: Fix null pointer dereference in hci_event_packet() - spi: spi-ti-qspi: fix reference leak in ti_qspi_setup - spi: tegra20-slink: fix reference leak in slink ops of tegra20 - spi: tegra20-sflash: fix reference leak in tegra_sflash_resume - spi: tegra114: fix reference leak in tegra spi ops - RDMa/mthca: Work around -Wenum-conversion warning - MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA - media: solo6x10: fix missing snd_card_free in error handling case - drm/omap: dmm_tiler: fix return error code in omap_dmm_probe() - Input: ads7846 - fix integer overflow on Rt calculation - Input: ads7846 - fix unaligned access on 7845 - powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32 - soc: ti: knav_qmss: fix reference leak in knav_queue_probe - soc: ti: Fix reference imbalance in knav_dma_probe - drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe - memstick: fix a double-free bug in memstick_check - ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host - ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host - orinoco: Move context allocation after processing the skb - cw1200: fix missing destroy_workqueue() on error in cw1200_init_common - mips: cdmm: fix use-after-free in mips_cdmm_bus_discover -
[Kernel-packages] [Bug 1910139] Re: Xenial update: v4.4.249 upstream stable release
This bug was fixed in the package linux-raspi2 - 4.4.0-1146.156 --- linux-raspi2 (4.4.0-1146.156) xenial; urgency=medium * xenial/linux-raspi2: 4.4.0-1146.156 -proposed tracker (LP: #1914134) * Xenial update: v4.4.249 upstream stable release (LP: #1910139) - [Config] raspi2: updateconfigs for SPI_DYNAMIC - [Config] raspi2: updateconfigs for USB_SISUSBVGA_CON [ Ubuntu: 4.4.0-203.235 ] * xenial/linux: 4.4.0-203.235 -proposed tracker (LP: #1914140) * Ubuntu 16.04 kernel 4.4.0-202 basic commands hanging (LP: #1913853) - SAUCE: Revert "mm: check that mm is still valid in madvise()" [ Ubuntu: 4.4.0-202.234 ] * xenial/linux: 4.4.0-202.234 -proposed tracker (LP: #1913086) * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * errinjct open fails on IBM POWER LPAR (LP: #1908710) - powerpc/rtas: Fix typo of ibm, open-errinjct in RTAS filter * 4.4 kernel panics in kvm wake_up() handler (LP: #1908428) - kvm: vmx: rename vmx_pre/post_block to pi_pre/post_block - KVM: VMX: extract __pi_post_block - KVM: VMX: avoid double list add with VT-d posted interrupts * restore reverted commit "crypto: arm64/sha - avoid non-standard inline asm tricks" (LP: #1907489) - crypto: arm64/sha - avoid non-standard inline asm tricks * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Xenial update: v4.4.249 upstream stable release (LP: #1910139) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - ARC: stack unwinding: don't assume non-current task is sleeping - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - [Config] updateconfigs for SPI_DYNAMIC - spi: Prevent adding devices below an unregistering controller - net/mlx4_en: Avoid scheduling restart task if it is already running - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: bridge: vlan: fix error return code in __vlan_add() - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - USB: serial: cp210x: enable usb generic throttle/unthrottle - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - dm table: Remove BUG_ON(in_interrupt()) - soc/tegra: fuse: Fix index bug in get_process_id - USB: serial: option: add interface-number sanity check to flag handling - USB: gadget: f_rndis: fix bitrate for SuperSpeed and above - usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul - media: msi2500: assign SPI bus number dynamically - Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt() - drm/gma500: fix double free of gma_connector - ARM: p2v: fix handling of LPAE translation in BE mode - crypto: talitos - Fix return type of current_desc_hdr() - spi: img-spfi: fix reference leak in img_spfi_resume - ASoC: pcm: DRAIN support reactivation - Bluetooth: Fix null pointer dereference in hci_event_packet() - spi: spi-ti-qspi: fix reference leak in ti_qspi_setup - spi: tegra20-slink: fix reference leak in slink ops of tegra20 - spi: tegra20-sflash: fix reference leak in tegra_sflash_resume - spi: tegra114: fix reference leak in tegra spi ops - RDMa/mthca: Work around -Wenum-conversion warning - MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA - media: solo6x10: fix missing snd_card_free in error handling case - drm/omap: dmm_tiler: fix return error code in omap_dmm_probe() - Input: ads7846 - fix integer overflow on Rt calculation - Input: ads7846 - fix unaligned access on 7845 - powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32 - soc: ti: knav_qmss: fix reference leak in knav_queue_probe - soc: ti: Fix reference imbalance in knav_dma_probe - drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe - memstick: fix a double-free bug in memstick_check - ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host -
[Kernel-packages] [Bug 1910139] Re: Xenial update: v4.4.249 upstream stable release
This bug was fixed in the package linux-snapdragon - 4.4.0-1150.160 --- linux-snapdragon (4.4.0-1150.160) xenial; urgency=medium * xenial/linux-snapdragon: 4.4.0-1150.160 -proposed tracker (LP: #1914136) * Xenial update: v4.4.249 upstream stable release (LP: #1910139) - [Config] snapdragon: update config for SPI_DYNAMIC - [Config] snapdragon: update config for USB_SISUSBVGA_CON [ Ubuntu: 4.4.0-203.235 ] * xenial/linux: 4.4.0-203.235 -proposed tracker (LP: #1914140) * Ubuntu 16.04 kernel 4.4.0-202 basic commands hanging (LP: #1913853) - SAUCE: Revert "mm: check that mm is still valid in madvise()" [ Ubuntu: 4.4.0-202.234 ] * xenial/linux: 4.4.0-202.234 -proposed tracker (LP: #1913086) * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * errinjct open fails on IBM POWER LPAR (LP: #1908710) - powerpc/rtas: Fix typo of ibm, open-errinjct in RTAS filter * 4.4 kernel panics in kvm wake_up() handler (LP: #1908428) - kvm: vmx: rename vmx_pre/post_block to pi_pre/post_block - KVM: VMX: extract __pi_post_block - KVM: VMX: avoid double list add with VT-d posted interrupts * restore reverted commit "crypto: arm64/sha - avoid non-standard inline asm tricks" (LP: #1907489) - crypto: arm64/sha - avoid non-standard inline asm tricks * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Xenial update: v4.4.249 upstream stable release (LP: #1910139) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - ARC: stack unwinding: don't assume non-current task is sleeping - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - [Config] updateconfigs for SPI_DYNAMIC - spi: Prevent adding devices below an unregistering controller - net/mlx4_en: Avoid scheduling restart task if it is already running - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: bridge: vlan: fix error return code in __vlan_add() - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - USB: serial: cp210x: enable usb generic throttle/unthrottle - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - dm table: Remove BUG_ON(in_interrupt()) - soc/tegra: fuse: Fix index bug in get_process_id - USB: serial: option: add interface-number sanity check to flag handling - USB: gadget: f_rndis: fix bitrate for SuperSpeed and above - usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul - media: msi2500: assign SPI bus number dynamically - Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt() - drm/gma500: fix double free of gma_connector - ARM: p2v: fix handling of LPAE translation in BE mode - crypto: talitos - Fix return type of current_desc_hdr() - spi: img-spfi: fix reference leak in img_spfi_resume - ASoC: pcm: DRAIN support reactivation - Bluetooth: Fix null pointer dereference in hci_event_packet() - spi: spi-ti-qspi: fix reference leak in ti_qspi_setup - spi: tegra20-slink: fix reference leak in slink ops of tegra20 - spi: tegra20-sflash: fix reference leak in tegra_sflash_resume - spi: tegra114: fix reference leak in tegra spi ops - RDMa/mthca: Work around -Wenum-conversion warning - MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA - media: solo6x10: fix missing snd_card_free in error handling case - drm/omap: dmm_tiler: fix return error code in omap_dmm_probe() - Input: ads7846 - fix integer overflow on Rt calculation - Input: ads7846 - fix unaligned access on 7845 - powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32 - soc: ti: knav_qmss: fix reference leak in knav_queue_probe - soc: ti: Fix reference imbalance in knav_dma_probe - drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe - memstick: fix a double-free bug in memstick_check - ARM: dts: at91: sama5d4_xplained: add pincontrol
[Kernel-packages] [Bug 1910749] Re: stop building nvidia dkms on kernels with no lrm
This bug was fixed in the package linux-oracle - 4.15.0-1065.73~16.04.1 --- linux-oracle (4.15.0-1065.73~16.04.1) xenial; urgency=medium * xenial/linux-oracle: 4.15.0-1065.73~16.04.1 -proposed tracker (LP: #1913112) * stop building nvidia dkms on kernels with no lrm (LP: #1910749) - [Packaging]: Stop building nvidia dkms [ Ubuntu: 4.15.0-1065.73 ] * bionic/linux-oracle: 4.15.0-1065.73 -proposed tracker (LP: #1913113) * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time - arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. - iwlwifi: mvm: fix kernel panic in case of assert during CSA - ARC: stack unwinding: don't assume non-current task is sleeping - scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE - soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - kbuild: avoid static_assert for genksyms - scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" - x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP - PCI: qcom: Add missing reset for ipq806x - net: stmmac: free tx skb buffer in stmmac_resume() - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net/mlx4_en: Avoid scheduling restart task if it is already running - net/mlx4_en: Handle TX error CQE - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux - net: bridge: vlan: fix error return code in __vlan_add() - mac80211: mesh: fix mesh_pathtbl_init() error path - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: UAS: introduce a quirk to set no_write_same - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning
[Kernel-packages] [Bug 1915717] Re: Ubuntu 21.04, kernel feature request, TLS device offload for Bond
These two do not cleanly pick to either Hirsute (currently at 5.10) or unstable (currently 5.11). The conflicts are small, but not clean in any case dc5809f9e2b6 net/bonding: Declare TLS RX device offload support 89df6a810470 net/bonding: Implement TLS TX device offload -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1915717 Title: Ubuntu 21.04, kernel feature request, TLS device offload for Bond Status in linux package in Ubuntu: Confirmed Bug description: The request here is to pull needed patches to support tls rx/tx offload for bond interfaces. patch set: 4e5a73329051 net/tls: Except bond interface from some TLS checks 153cbd137f0a net/tls: Device offload to use lowest netdevice in chain dc5809f9e2b6 net/bonding: Declare TLS RX device offload support 89df6a810470 net/bonding: Implement TLS TX device offload f45583de361d net/bonding: Take update_features call out of XFRM funciton 007feb87fb15 net/bonding: Implement ndo_sk_get_lower_dev 5b99854540e3 net/bonding: Take IP hash logic into a helper 719a402cf603 net: netdevice: Add operation ndo_sk_get_lower_dev https://www.spinics.net/lists/netdev/msg714607.html https://www.spinics.net/lists/netdev/msg714991.html * the set was originally applied to net/net-next (hashes above are from net-next tree cloned from git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git) * The set is cleanly applied on ubuntu-unstable branch (cloned from git://git.launchpad.net/~ubuntu-kernel/ubuntu/+source/linux/+git/unstable) * the set is accepted to upstream v5.12 and thus not natively in 21.04 thanks, Amir To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1915717/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1908428] Re: 4.4 kernel panics in kvm wake_up() handler
This bug was fixed in the package linux - 4.4.0-203.235 --- linux (4.4.0-203.235) xenial; urgency=medium * xenial/linux: 4.4.0-203.235 -proposed tracker (LP: #1914140) * Ubuntu 16.04 kernel 4.4.0-202 basic commands hanging (LP: #1913853) - SAUCE: Revert "mm: check that mm is still valid in madvise()" linux (4.4.0-202.234) xenial; urgency=medium * xenial/linux: 4.4.0-202.234 -proposed tracker (LP: #1913086) * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * errinjct open fails on IBM POWER LPAR (LP: #1908710) - powerpc/rtas: Fix typo of ibm, open-errinjct in RTAS filter * 4.4 kernel panics in kvm wake_up() handler (LP: #1908428) - kvm: vmx: rename vmx_pre/post_block to pi_pre/post_block - KVM: VMX: extract __pi_post_block - KVM: VMX: avoid double list add with VT-d posted interrupts * restore reverted commit "crypto: arm64/sha - avoid non-standard inline asm tricks" (LP: #1907489) - crypto: arm64/sha - avoid non-standard inline asm tricks * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Xenial update: v4.4.249 upstream stable release (LP: #1910139) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - ARC: stack unwinding: don't assume non-current task is sleeping - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - [Config] updateconfigs for SPI_DYNAMIC - spi: Prevent adding devices below an unregistering controller - net/mlx4_en: Avoid scheduling restart task if it is already running - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: bridge: vlan: fix error return code in __vlan_add() - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - USB: serial: cp210x: enable usb generic throttle/unthrottle - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - dm table: Remove BUG_ON(in_interrupt()) - soc/tegra: fuse: Fix index bug in get_process_id - USB: serial: option: add interface-number sanity check to flag handling - USB: gadget: f_rndis: fix bitrate for SuperSpeed and above - usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul - media: msi2500: assign SPI bus number dynamically - Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt() - drm/gma500: fix double free of gma_connector - ARM: p2v: fix handling of LPAE translation in BE mode - crypto: talitos - Fix return type of current_desc_hdr() - spi: img-spfi: fix reference leak in img_spfi_resume - ASoC: pcm: DRAIN support reactivation - Bluetooth: Fix null pointer dereference in hci_event_packet() - spi: spi-ti-qspi: fix reference leak in ti_qspi_setup - spi: tegra20-slink: fix reference leak in slink ops of tegra20 - spi: tegra20-sflash: fix reference leak in tegra_sflash_resume - spi: tegra114: fix reference leak in tegra spi ops - RDMa/mthca: Work around -Wenum-conversion warning - MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA - media: solo6x10: fix missing snd_card_free in error handling case - drm/omap: dmm_tiler: fix return error code in omap_dmm_probe() - Input: ads7846 - fix integer overflow on Rt calculation - Input: ads7846 - fix unaligned access on 7845 - powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32 - soc: ti: knav_qmss: fix reference leak in knav_queue_probe - soc: ti: Fix reference imbalance in knav_dma_probe - drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe - memstick: fix a double-free bug in memstick_check - ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host - ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host - orinoco: Move context allocation after processing the skb - cw1200: fix missing destroy_workqueue() on error in cw1200_init_common - mips: cdmm: fix use-after-free in mips_cdmm_bus_discover -
[Kernel-packages] [Bug 1907489] Re: restore reverted commit "crypto: arm64/sha - avoid non-standard inline asm tricks"
This bug was fixed in the package linux - 4.4.0-203.235 --- linux (4.4.0-203.235) xenial; urgency=medium * xenial/linux: 4.4.0-203.235 -proposed tracker (LP: #1914140) * Ubuntu 16.04 kernel 4.4.0-202 basic commands hanging (LP: #1913853) - SAUCE: Revert "mm: check that mm is still valid in madvise()" linux (4.4.0-202.234) xenial; urgency=medium * xenial/linux: 4.4.0-202.234 -proposed tracker (LP: #1913086) * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * errinjct open fails on IBM POWER LPAR (LP: #1908710) - powerpc/rtas: Fix typo of ibm, open-errinjct in RTAS filter * 4.4 kernel panics in kvm wake_up() handler (LP: #1908428) - kvm: vmx: rename vmx_pre/post_block to pi_pre/post_block - KVM: VMX: extract __pi_post_block - KVM: VMX: avoid double list add with VT-d posted interrupts * restore reverted commit "crypto: arm64/sha - avoid non-standard inline asm tricks" (LP: #1907489) - crypto: arm64/sha - avoid non-standard inline asm tricks * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Xenial update: v4.4.249 upstream stable release (LP: #1910139) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - ARC: stack unwinding: don't assume non-current task is sleeping - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - [Config] updateconfigs for SPI_DYNAMIC - spi: Prevent adding devices below an unregistering controller - net/mlx4_en: Avoid scheduling restart task if it is already running - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: bridge: vlan: fix error return code in __vlan_add() - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - USB: serial: cp210x: enable usb generic throttle/unthrottle - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - dm table: Remove BUG_ON(in_interrupt()) - soc/tegra: fuse: Fix index bug in get_process_id - USB: serial: option: add interface-number sanity check to flag handling - USB: gadget: f_rndis: fix bitrate for SuperSpeed and above - usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul - media: msi2500: assign SPI bus number dynamically - Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt() - drm/gma500: fix double free of gma_connector - ARM: p2v: fix handling of LPAE translation in BE mode - crypto: talitos - Fix return type of current_desc_hdr() - spi: img-spfi: fix reference leak in img_spfi_resume - ASoC: pcm: DRAIN support reactivation - Bluetooth: Fix null pointer dereference in hci_event_packet() - spi: spi-ti-qspi: fix reference leak in ti_qspi_setup - spi: tegra20-slink: fix reference leak in slink ops of tegra20 - spi: tegra20-sflash: fix reference leak in tegra_sflash_resume - spi: tegra114: fix reference leak in tegra spi ops - RDMa/mthca: Work around -Wenum-conversion warning - MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA - media: solo6x10: fix missing snd_card_free in error handling case - drm/omap: dmm_tiler: fix return error code in omap_dmm_probe() - Input: ads7846 - fix integer overflow on Rt calculation - Input: ads7846 - fix unaligned access on 7845 - powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32 - soc: ti: knav_qmss: fix reference leak in knav_queue_probe - soc: ti: Fix reference imbalance in knav_dma_probe - drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe - memstick: fix a double-free bug in memstick_check - ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host - ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host - orinoco: Move context allocation after processing the skb - cw1200: fix missing destroy_workqueue() on error in cw1200_init_common - mips: cdmm: fix use-after-free in mips_cdmm_bus_discover -
[Kernel-packages] [Bug 1837326] Re: platform eisa.0: EISA: Cannot allocate resource for mainboard
Still an issue on latest kernel: 5.8.0-43-generic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1837326 Title: platform eisa.0: EISA: Cannot allocate resource for mainboard Status in linux package in Ubuntu: Confirmed Bug description: dmesg: [0.889531] platform eisa.0: EISA: Cannot allocate resource for mainboard [0.889533] platform eisa.0: Cannot allocate resource for EISA slot 1 [0.889535] platform eisa.0: Cannot allocate resource for EISA slot 2 [0.889536] platform eisa.0: Cannot allocate resource for EISA slot 3 [0.889537] platform eisa.0: Cannot allocate resource for EISA slot 4 [0.889539] platform eisa.0: Cannot allocate resource for EISA slot 5 [0.889540] platform eisa.0: Cannot allocate resource for EISA slot 6 [0.889541] platform eisa.0: Cannot allocate resource for EISA slot 7 [0.889542] platform eisa.0: Cannot allocate resource for EISA slot 8 ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: linux-image-5.2.0-8-generic 5.2.0-8.9 ProcVersionSignature: Ubuntu 5.2.0-8.9-generic 5.2.0 Uname: Linux 5.2.0-8-generic x86_64 ApportVersion: 2.20.11-0ubuntu5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: caravena 3028 F pulseaudio /dev/snd/pcmC0D0p: caravena 3028 F...m pulseaudio CurrentDesktop: ubuntu:GNOME Date: Sun Jul 21 12:16:07 2019 HibernationDevice: RESUME=UUID=efcf081f-0bb0-4907-b78c-1299aa4aee57 InstallationDate: Installed on 2018-12-02 (230 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) MachineType: HP HP Pavilion x360 Convertible 14-cd0xxx ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-5.2.0-8-generic root=UUID=28bdadba-133c-4f5b-a5c9-b06993ea7ce2 ro rootflags=subvol=@ quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.2.0-8-generic N/A linux-backports-modules-5.2.0-8-generic N/A linux-firmware 1.181 SourcePackage: linux UpgradeStatus: Upgraded to eoan on 2018-12-02 (230 days ago) dmi.bios.date: 04/29/2019 dmi.bios.vendor: Insyde dmi.bios.version: F.34 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8486 dmi.board.vendor: HP dmi.board.version: 72.23 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 31 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.34:bd04/29/2019:svnHP:pnHPPavilionx360Convertible14-cd0xxx:pvrType1ProductConfigId:rvnHP:rn8486:rvr72.23:cvnHP:ct31:cvrChassisVersion: dmi.product.family: 103C_5335KV HP Pavilion dmi.product.name: HP Pavilion x360 Convertible 14-cd0xxx dmi.product.sku: 3PX63LA#ABM dmi.product.version: Type1ProductConfigId dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1837326/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1908264] Re: Disable Atari partition support for cloud kernels
This bug was fixed in the package linux-azure - 4.15.0-1108.120~16.04.1 --- linux-azure (4.15.0-1108.120~16.04.1) xenial; urgency=medium * xenial/linux-azure: 4.15.0-1108.120~16.04.1 -proposed tracker (LP: #1915370) * Enable boot from NVMe device for all images (LP: #1908571) - [Config] azure: Remove pci-hyperv from module list * stop building nvidia dkms on kernels with no lrm (LP: #1910749) - [Packaging]: Stop building nvidia dkms [ Ubuntu: 4.15.0-1108.120 ] * bionic/linux-azure-4.15: 4.15.0-1108.120 -proposed tracker (LP: #1915371) * Add XDP support to hv_netvsc driver (LP: #1877654) - hv_netvsc: pass netvsc_device to receive callback - xdp: base API for new XDP rx-queue info concept - ixgbe: setup xdp_rxq_info - xdp/qede: setup xdp_rxq_info and intro xdp_rxq_info_is_reg - tun: setup xdp_rxq_info - virtio_net: setup xdp_rxq_info - xdp: generic XDP handling of xdp_rxq_info - tun/tap: use ptr_ring instead of skb_array - tuntap: XDP transmission - net: avoid including xdp.h in filter.h - virtio_net: fix ndo_xdp_xmit crash towards dev not ready for XDP - tuntap: XDP_TX can use native XDP - i40e: add support for XDP_REDIRECT - xdp: introduce xdp_return_frame API and use in cpumap - ixgbe: use xdp_return_frame API - xdp: move struct xdp_buff from filter.h to xdp.h - xdp: introduce a new xdp_frame type - tun: convert to use generic xdp_frame and xdp_return_frame API - virtio_net: convert to use generic xdp_frame and xdp_return_frame API - bpf: cpumap convert to use generic xdp_frame - i40e: convert to use generic xdp_frame and xdp_return_frame API - xdp: rhashtable with allocator ID to pointer mapping - page_pool: refurbish version of page_pool code - xdp: allow page_pool as an allocator type in xdp_return_frame - xdp: transition into using xdp_frame for return API - xdp: transition into using xdp_frame for ndo_xdp_xmit - xsk: add user memory registration support sockopt - xsk: add umem fill queue support and mmap - xsk: add Rx queue setup and mmap support - xsk: add support for bind for Rx - xsk: add Rx receive functions and poll support - bpf: devmap introduce dev_map_enqueue - bpf: devmap prepare xdp frames for bulking - xdp: introduce xdp_return_frame_rx_napi - xdp: add MEM_TYPE_ZERO_COPY - hv_netvsc: Add support for LRO/RSC in the vSwitch - hv_netvsc: Refactor assignments of struct netvsc_device_info - hv_netvsc: Add XDP support - hv_netvsc: Update document for XDP support - hv_netvsc: Fix XDP refcnt for synthetic and VF NICs * Sync FSGSBASE patches in azure kernel with mainline (LP: #1913294) - x86/kvm/vmx: read MSR_{FS, KERNEL_GS}_BASE from current->thread - x86/process/64: Make save_fsgs_for_kvm() ready for FSGSBASE - x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM * Disable Atari partition support for cloud kernels (LP: #1908264) - [Config] azure: Disable ATARI_PARTITION * Enable boot from NVMe device for all images (LP: #1908571) - [Config] azure: CONFIG_PCI_HYPERV=y * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names *
[Kernel-packages] [Bug 1908571] Re: Enable boot from NVMe device for all images
This bug was fixed in the package linux-azure - 4.15.0-1108.120~16.04.1 --- linux-azure (4.15.0-1108.120~16.04.1) xenial; urgency=medium * xenial/linux-azure: 4.15.0-1108.120~16.04.1 -proposed tracker (LP: #1915370) * Enable boot from NVMe device for all images (LP: #1908571) - [Config] azure: Remove pci-hyperv from module list * stop building nvidia dkms on kernels with no lrm (LP: #1910749) - [Packaging]: Stop building nvidia dkms [ Ubuntu: 4.15.0-1108.120 ] * bionic/linux-azure-4.15: 4.15.0-1108.120 -proposed tracker (LP: #1915371) * Add XDP support to hv_netvsc driver (LP: #1877654) - hv_netvsc: pass netvsc_device to receive callback - xdp: base API for new XDP rx-queue info concept - ixgbe: setup xdp_rxq_info - xdp/qede: setup xdp_rxq_info and intro xdp_rxq_info_is_reg - tun: setup xdp_rxq_info - virtio_net: setup xdp_rxq_info - xdp: generic XDP handling of xdp_rxq_info - tun/tap: use ptr_ring instead of skb_array - tuntap: XDP transmission - net: avoid including xdp.h in filter.h - virtio_net: fix ndo_xdp_xmit crash towards dev not ready for XDP - tuntap: XDP_TX can use native XDP - i40e: add support for XDP_REDIRECT - xdp: introduce xdp_return_frame API and use in cpumap - ixgbe: use xdp_return_frame API - xdp: move struct xdp_buff from filter.h to xdp.h - xdp: introduce a new xdp_frame type - tun: convert to use generic xdp_frame and xdp_return_frame API - virtio_net: convert to use generic xdp_frame and xdp_return_frame API - bpf: cpumap convert to use generic xdp_frame - i40e: convert to use generic xdp_frame and xdp_return_frame API - xdp: rhashtable with allocator ID to pointer mapping - page_pool: refurbish version of page_pool code - xdp: allow page_pool as an allocator type in xdp_return_frame - xdp: transition into using xdp_frame for return API - xdp: transition into using xdp_frame for ndo_xdp_xmit - xsk: add user memory registration support sockopt - xsk: add umem fill queue support and mmap - xsk: add Rx queue setup and mmap support - xsk: add support for bind for Rx - xsk: add Rx receive functions and poll support - bpf: devmap introduce dev_map_enqueue - bpf: devmap prepare xdp frames for bulking - xdp: introduce xdp_return_frame_rx_napi - xdp: add MEM_TYPE_ZERO_COPY - hv_netvsc: Add support for LRO/RSC in the vSwitch - hv_netvsc: Refactor assignments of struct netvsc_device_info - hv_netvsc: Add XDP support - hv_netvsc: Update document for XDP support - hv_netvsc: Fix XDP refcnt for synthetic and VF NICs * Sync FSGSBASE patches in azure kernel with mainline (LP: #1913294) - x86/kvm/vmx: read MSR_{FS, KERNEL_GS}_BASE from current->thread - x86/process/64: Make save_fsgs_for_kvm() ready for FSGSBASE - x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM * Disable Atari partition support for cloud kernels (LP: #1908264) - [Config] azure: Disable ATARI_PARTITION * Enable boot from NVMe device for all images (LP: #1908571) - [Config] azure: CONFIG_PCI_HYPERV=y * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names *
[Kernel-packages] [Bug 1908710] Re: errinjct open fails on IBM POWER LPAR
This bug was fixed in the package linux - 4.4.0-203.235 --- linux (4.4.0-203.235) xenial; urgency=medium * xenial/linux: 4.4.0-203.235 -proposed tracker (LP: #1914140) * Ubuntu 16.04 kernel 4.4.0-202 basic commands hanging (LP: #1913853) - SAUCE: Revert "mm: check that mm is still valid in madvise()" linux (4.4.0-202.234) xenial; urgency=medium * xenial/linux: 4.4.0-202.234 -proposed tracker (LP: #1913086) * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * errinjct open fails on IBM POWER LPAR (LP: #1908710) - powerpc/rtas: Fix typo of ibm, open-errinjct in RTAS filter * 4.4 kernel panics in kvm wake_up() handler (LP: #1908428) - kvm: vmx: rename vmx_pre/post_block to pi_pre/post_block - KVM: VMX: extract __pi_post_block - KVM: VMX: avoid double list add with VT-d posted interrupts * restore reverted commit "crypto: arm64/sha - avoid non-standard inline asm tricks" (LP: #1907489) - crypto: arm64/sha - avoid non-standard inline asm tricks * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Xenial update: v4.4.249 upstream stable release (LP: #1910139) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - ARC: stack unwinding: don't assume non-current task is sleeping - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - [Config] updateconfigs for SPI_DYNAMIC - spi: Prevent adding devices below an unregistering controller - net/mlx4_en: Avoid scheduling restart task if it is already running - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: bridge: vlan: fix error return code in __vlan_add() - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - USB: serial: cp210x: enable usb generic throttle/unthrottle - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - dm table: Remove BUG_ON(in_interrupt()) - soc/tegra: fuse: Fix index bug in get_process_id - USB: serial: option: add interface-number sanity check to flag handling - USB: gadget: f_rndis: fix bitrate for SuperSpeed and above - usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul - media: msi2500: assign SPI bus number dynamically - Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt() - drm/gma500: fix double free of gma_connector - ARM: p2v: fix handling of LPAE translation in BE mode - crypto: talitos - Fix return type of current_desc_hdr() - spi: img-spfi: fix reference leak in img_spfi_resume - ASoC: pcm: DRAIN support reactivation - Bluetooth: Fix null pointer dereference in hci_event_packet() - spi: spi-ti-qspi: fix reference leak in ti_qspi_setup - spi: tegra20-slink: fix reference leak in slink ops of tegra20 - spi: tegra20-sflash: fix reference leak in tegra_sflash_resume - spi: tegra114: fix reference leak in tegra spi ops - RDMa/mthca: Work around -Wenum-conversion warning - MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA - media: solo6x10: fix missing snd_card_free in error handling case - drm/omap: dmm_tiler: fix return error code in omap_dmm_probe() - Input: ads7846 - fix integer overflow on Rt calculation - Input: ads7846 - fix unaligned access on 7845 - powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32 - soc: ti: knav_qmss: fix reference leak in knav_queue_probe - soc: ti: Fix reference imbalance in knav_dma_probe - drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe - memstick: fix a double-free bug in memstick_check - ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host - ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host - orinoco: Move context allocation after processing the skb - cw1200: fix missing destroy_workqueue() on error in cw1200_init_common - mips: cdmm: fix use-after-free in mips_cdmm_bus_discover -
[Kernel-packages] [Bug 1910639] Re: DMI entry syntax fix for Pegatron / ByteSpeed C15B
This bug was fixed in the package linux - 4.4.0-203.235 --- linux (4.4.0-203.235) xenial; urgency=medium * xenial/linux: 4.4.0-203.235 -proposed tracker (LP: #1914140) * Ubuntu 16.04 kernel 4.4.0-202 basic commands hanging (LP: #1913853) - SAUCE: Revert "mm: check that mm is still valid in madvise()" linux (4.4.0-202.234) xenial; urgency=medium * xenial/linux: 4.4.0-202.234 -proposed tracker (LP: #1913086) * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * errinjct open fails on IBM POWER LPAR (LP: #1908710) - powerpc/rtas: Fix typo of ibm, open-errinjct in RTAS filter * 4.4 kernel panics in kvm wake_up() handler (LP: #1908428) - kvm: vmx: rename vmx_pre/post_block to pi_pre/post_block - KVM: VMX: extract __pi_post_block - KVM: VMX: avoid double list add with VT-d posted interrupts * restore reverted commit "crypto: arm64/sha - avoid non-standard inline asm tricks" (LP: #1907489) - crypto: arm64/sha - avoid non-standard inline asm tricks * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Xenial update: v4.4.249 upstream stable release (LP: #1910139) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - ARC: stack unwinding: don't assume non-current task is sleeping - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - [Config] updateconfigs for SPI_DYNAMIC - spi: Prevent adding devices below an unregistering controller - net/mlx4_en: Avoid scheduling restart task if it is already running - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: bridge: vlan: fix error return code in __vlan_add() - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - USB: serial: cp210x: enable usb generic throttle/unthrottle - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - dm table: Remove BUG_ON(in_interrupt()) - soc/tegra: fuse: Fix index bug in get_process_id - USB: serial: option: add interface-number sanity check to flag handling - USB: gadget: f_rndis: fix bitrate for SuperSpeed and above - usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul - media: msi2500: assign SPI bus number dynamically - Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt() - drm/gma500: fix double free of gma_connector - ARM: p2v: fix handling of LPAE translation in BE mode - crypto: talitos - Fix return type of current_desc_hdr() - spi: img-spfi: fix reference leak in img_spfi_resume - ASoC: pcm: DRAIN support reactivation - Bluetooth: Fix null pointer dereference in hci_event_packet() - spi: spi-ti-qspi: fix reference leak in ti_qspi_setup - spi: tegra20-slink: fix reference leak in slink ops of tegra20 - spi: tegra20-sflash: fix reference leak in tegra_sflash_resume - spi: tegra114: fix reference leak in tegra spi ops - RDMa/mthca: Work around -Wenum-conversion warning - MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA - media: solo6x10: fix missing snd_card_free in error handling case - drm/omap: dmm_tiler: fix return error code in omap_dmm_probe() - Input: ads7846 - fix integer overflow on Rt calculation - Input: ads7846 - fix unaligned access on 7845 - powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32 - soc: ti: knav_qmss: fix reference leak in knav_queue_probe - soc: ti: Fix reference imbalance in knav_dma_probe - drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe - memstick: fix a double-free bug in memstick_check - ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host - ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host - orinoco: Move context allocation after processing the skb - cw1200: fix missing destroy_workqueue() on error in cw1200_init_common - mips: cdmm: fix use-after-free in mips_cdmm_bus_discover -
[Kernel-packages] [Bug 1910137] Re: Xenial update: v4.4.248 upstream stable release
This bug was fixed in the package linux - 4.4.0-203.235 --- linux (4.4.0-203.235) xenial; urgency=medium * xenial/linux: 4.4.0-203.235 -proposed tracker (LP: #1914140) * Ubuntu 16.04 kernel 4.4.0-202 basic commands hanging (LP: #1913853) - SAUCE: Revert "mm: check that mm is still valid in madvise()" linux (4.4.0-202.234) xenial; urgency=medium * xenial/linux: 4.4.0-202.234 -proposed tracker (LP: #1913086) * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * errinjct open fails on IBM POWER LPAR (LP: #1908710) - powerpc/rtas: Fix typo of ibm, open-errinjct in RTAS filter * 4.4 kernel panics in kvm wake_up() handler (LP: #1908428) - kvm: vmx: rename vmx_pre/post_block to pi_pre/post_block - KVM: VMX: extract __pi_post_block - KVM: VMX: avoid double list add with VT-d posted interrupts * restore reverted commit "crypto: arm64/sha - avoid non-standard inline asm tricks" (LP: #1907489) - crypto: arm64/sha - avoid non-standard inline asm tricks * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Xenial update: v4.4.249 upstream stable release (LP: #1910139) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - ARC: stack unwinding: don't assume non-current task is sleeping - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - [Config] updateconfigs for SPI_DYNAMIC - spi: Prevent adding devices below an unregistering controller - net/mlx4_en: Avoid scheduling restart task if it is already running - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: bridge: vlan: fix error return code in __vlan_add() - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - USB: serial: cp210x: enable usb generic throttle/unthrottle - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - dm table: Remove BUG_ON(in_interrupt()) - soc/tegra: fuse: Fix index bug in get_process_id - USB: serial: option: add interface-number sanity check to flag handling - USB: gadget: f_rndis: fix bitrate for SuperSpeed and above - usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul - media: msi2500: assign SPI bus number dynamically - Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt() - drm/gma500: fix double free of gma_connector - ARM: p2v: fix handling of LPAE translation in BE mode - crypto: talitos - Fix return type of current_desc_hdr() - spi: img-spfi: fix reference leak in img_spfi_resume - ASoC: pcm: DRAIN support reactivation - Bluetooth: Fix null pointer dereference in hci_event_packet() - spi: spi-ti-qspi: fix reference leak in ti_qspi_setup - spi: tegra20-slink: fix reference leak in slink ops of tegra20 - spi: tegra20-sflash: fix reference leak in tegra_sflash_resume - spi: tegra114: fix reference leak in tegra spi ops - RDMa/mthca: Work around -Wenum-conversion warning - MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA - media: solo6x10: fix missing snd_card_free in error handling case - drm/omap: dmm_tiler: fix return error code in omap_dmm_probe() - Input: ads7846 - fix integer overflow on Rt calculation - Input: ads7846 - fix unaligned access on 7845 - powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32 - soc: ti: knav_qmss: fix reference leak in knav_queue_probe - soc: ti: Fix reference imbalance in knav_dma_probe - drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe - memstick: fix a double-free bug in memstick_check - ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host - ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host - orinoco: Move context allocation after processing the skb - cw1200: fix missing destroy_workqueue() on error in cw1200_init_common - mips: cdmm: fix use-after-free in mips_cdmm_bus_discover -
[Kernel-packages] [Bug 1913294] Re: Sync FSGSBASE patches in azure kernel with mainline
This bug was fixed in the package linux-azure - 4.15.0-1108.120~16.04.1 --- linux-azure (4.15.0-1108.120~16.04.1) xenial; urgency=medium * xenial/linux-azure: 4.15.0-1108.120~16.04.1 -proposed tracker (LP: #1915370) * Enable boot from NVMe device for all images (LP: #1908571) - [Config] azure: Remove pci-hyperv from module list * stop building nvidia dkms on kernels with no lrm (LP: #1910749) - [Packaging]: Stop building nvidia dkms [ Ubuntu: 4.15.0-1108.120 ] * bionic/linux-azure-4.15: 4.15.0-1108.120 -proposed tracker (LP: #1915371) * Add XDP support to hv_netvsc driver (LP: #1877654) - hv_netvsc: pass netvsc_device to receive callback - xdp: base API for new XDP rx-queue info concept - ixgbe: setup xdp_rxq_info - xdp/qede: setup xdp_rxq_info and intro xdp_rxq_info_is_reg - tun: setup xdp_rxq_info - virtio_net: setup xdp_rxq_info - xdp: generic XDP handling of xdp_rxq_info - tun/tap: use ptr_ring instead of skb_array - tuntap: XDP transmission - net: avoid including xdp.h in filter.h - virtio_net: fix ndo_xdp_xmit crash towards dev not ready for XDP - tuntap: XDP_TX can use native XDP - i40e: add support for XDP_REDIRECT - xdp: introduce xdp_return_frame API and use in cpumap - ixgbe: use xdp_return_frame API - xdp: move struct xdp_buff from filter.h to xdp.h - xdp: introduce a new xdp_frame type - tun: convert to use generic xdp_frame and xdp_return_frame API - virtio_net: convert to use generic xdp_frame and xdp_return_frame API - bpf: cpumap convert to use generic xdp_frame - i40e: convert to use generic xdp_frame and xdp_return_frame API - xdp: rhashtable with allocator ID to pointer mapping - page_pool: refurbish version of page_pool code - xdp: allow page_pool as an allocator type in xdp_return_frame - xdp: transition into using xdp_frame for return API - xdp: transition into using xdp_frame for ndo_xdp_xmit - xsk: add user memory registration support sockopt - xsk: add umem fill queue support and mmap - xsk: add Rx queue setup and mmap support - xsk: add support for bind for Rx - xsk: add Rx receive functions and poll support - bpf: devmap introduce dev_map_enqueue - bpf: devmap prepare xdp frames for bulking - xdp: introduce xdp_return_frame_rx_napi - xdp: add MEM_TYPE_ZERO_COPY - hv_netvsc: Add support for LRO/RSC in the vSwitch - hv_netvsc: Refactor assignments of struct netvsc_device_info - hv_netvsc: Add XDP support - hv_netvsc: Update document for XDP support - hv_netvsc: Fix XDP refcnt for synthetic and VF NICs * Sync FSGSBASE patches in azure kernel with mainline (LP: #1913294) - x86/kvm/vmx: read MSR_{FS, KERNEL_GS}_BASE from current->thread - x86/process/64: Make save_fsgs_for_kvm() ready for FSGSBASE - x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM * Disable Atari partition support for cloud kernels (LP: #1908264) - [Config] azure: Disable ATARI_PARTITION * Enable boot from NVMe device for all images (LP: #1908571) - [Config] azure: CONFIG_PCI_HYPERV=y * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names *
[Kernel-packages] [Bug 1913739] Re: aws: properly support instance types with > 255 cpu cores
This bug was fixed in the package linux-aws - 4.4.0-1122.136 --- linux-aws (4.4.0-1122.136) xenial; urgency=medium * xenial/linux-aws: 4.4.0-1122.136 -proposed tracker (LP: #1914129) * Xenial update: v4.4.249 upstream stable release (LP: #1910139) - [Config] updateconfigs for SPI_DYNAMIC * aws: properly support instance types with > 255 cpu cores (LP: #1913739) - iommu/vt-d: Gracefully handle DMAR units with no supported address widths [ Ubuntu: 4.4.0-203.235 ] * xenial/linux: 4.4.0-203.235 -proposed tracker (LP: #1914140) * Ubuntu 16.04 kernel 4.4.0-202 basic commands hanging (LP: #1913853) - SAUCE: Revert "mm: check that mm is still valid in madvise()" [ Ubuntu: 4.4.0-202.234 ] * xenial/linux: 4.4.0-202.234 -proposed tracker (LP: #1913086) * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * errinjct open fails on IBM POWER LPAR (LP: #1908710) - powerpc/rtas: Fix typo of ibm, open-errinjct in RTAS filter * 4.4 kernel panics in kvm wake_up() handler (LP: #1908428) - kvm: vmx: rename vmx_pre/post_block to pi_pre/post_block - KVM: VMX: extract __pi_post_block - KVM: VMX: avoid double list add with VT-d posted interrupts * restore reverted commit "crypto: arm64/sha - avoid non-standard inline asm tricks" (LP: #1907489) - crypto: arm64/sha - avoid non-standard inline asm tricks * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Xenial update: v4.4.249 upstream stable release (LP: #1910139) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - ARC: stack unwinding: don't assume non-current task is sleeping - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - [Config] updateconfigs for SPI_DYNAMIC - spi: Prevent adding devices below an unregistering controller - net/mlx4_en: Avoid scheduling restart task if it is already running - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: bridge: vlan: fix error return code in __vlan_add() - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - USB: serial: cp210x: enable usb generic throttle/unthrottle - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - dm table: Remove BUG_ON(in_interrupt()) - soc/tegra: fuse: Fix index bug in get_process_id - USB: serial: option: add interface-number sanity check to flag handling - USB: gadget: f_rndis: fix bitrate for SuperSpeed and above - usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul - media: msi2500: assign SPI bus number dynamically - Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt() - drm/gma500: fix double free of gma_connector - ARM: p2v: fix handling of LPAE translation in BE mode - crypto: talitos - Fix return type of current_desc_hdr() - spi: img-spfi: fix reference leak in img_spfi_resume - ASoC: pcm: DRAIN support reactivation - Bluetooth: Fix null pointer dereference in hci_event_packet() - spi: spi-ti-qspi: fix reference leak in ti_qspi_setup - spi: tegra20-slink: fix reference leak in slink ops of tegra20 - spi: tegra20-sflash: fix reference leak in tegra_sflash_resume - spi: tegra114: fix reference leak in tegra spi ops - RDMa/mthca: Work around -Wenum-conversion warning - MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA - media: solo6x10: fix missing snd_card_free in error handling case - drm/omap: dmm_tiler: fix return error code in omap_dmm_probe() - Input: ads7846 - fix integer overflow on Rt calculation - Input: ads7846 - fix unaligned access on 7845 - powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32 - soc: ti: knav_qmss: fix reference leak in knav_queue_probe - soc: ti: Fix reference imbalance in knav_dma_probe - drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe - memstick: fix a double-free bug in
[Kernel-packages] [Bug 1913853] Re: Ubuntu 16.04 kernel 4.4.0-202 basic commands hanging
This bug was fixed in the package linux - 4.4.0-203.235 --- linux (4.4.0-203.235) xenial; urgency=medium * xenial/linux: 4.4.0-203.235 -proposed tracker (LP: #1914140) * Ubuntu 16.04 kernel 4.4.0-202 basic commands hanging (LP: #1913853) - SAUCE: Revert "mm: check that mm is still valid in madvise()" linux (4.4.0-202.234) xenial; urgency=medium * xenial/linux: 4.4.0-202.234 -proposed tracker (LP: #1913086) * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * errinjct open fails on IBM POWER LPAR (LP: #1908710) - powerpc/rtas: Fix typo of ibm, open-errinjct in RTAS filter * 4.4 kernel panics in kvm wake_up() handler (LP: #1908428) - kvm: vmx: rename vmx_pre/post_block to pi_pre/post_block - KVM: VMX: extract __pi_post_block - KVM: VMX: avoid double list add with VT-d posted interrupts * restore reverted commit "crypto: arm64/sha - avoid non-standard inline asm tricks" (LP: #1907489) - crypto: arm64/sha - avoid non-standard inline asm tricks * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Xenial update: v4.4.249 upstream stable release (LP: #1910139) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - ARC: stack unwinding: don't assume non-current task is sleeping - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - [Config] updateconfigs for SPI_DYNAMIC - spi: Prevent adding devices below an unregistering controller - net/mlx4_en: Avoid scheduling restart task if it is already running - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: bridge: vlan: fix error return code in __vlan_add() - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - USB: serial: cp210x: enable usb generic throttle/unthrottle - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - dm table: Remove BUG_ON(in_interrupt()) - soc/tegra: fuse: Fix index bug in get_process_id - USB: serial: option: add interface-number sanity check to flag handling - USB: gadget: f_rndis: fix bitrate for SuperSpeed and above - usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul - media: msi2500: assign SPI bus number dynamically - Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt() - drm/gma500: fix double free of gma_connector - ARM: p2v: fix handling of LPAE translation in BE mode - crypto: talitos - Fix return type of current_desc_hdr() - spi: img-spfi: fix reference leak in img_spfi_resume - ASoC: pcm: DRAIN support reactivation - Bluetooth: Fix null pointer dereference in hci_event_packet() - spi: spi-ti-qspi: fix reference leak in ti_qspi_setup - spi: tegra20-slink: fix reference leak in slink ops of tegra20 - spi: tegra20-sflash: fix reference leak in tegra_sflash_resume - spi: tegra114: fix reference leak in tegra spi ops - RDMa/mthca: Work around -Wenum-conversion warning - MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA - media: solo6x10: fix missing snd_card_free in error handling case - drm/omap: dmm_tiler: fix return error code in omap_dmm_probe() - Input: ads7846 - fix integer overflow on Rt calculation - Input: ads7846 - fix unaligned access on 7845 - powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32 - soc: ti: knav_qmss: fix reference leak in knav_queue_probe - soc: ti: Fix reference imbalance in knav_dma_probe - drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe - memstick: fix a double-free bug in memstick_check - ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host - ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host - orinoco: Move context allocation after processing the skb - cw1200: fix missing destroy_workqueue() on error in cw1200_init_common - mips: cdmm: fix use-after-free in mips_cdmm_bus_discover -
[Kernel-packages] [Bug 1916656] [NEW] Xenial update: v4.4.255 upstream stable release
Public bug reported: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v4.4.255 upstream stable release from git://git.kernel.org/ ACPI: sysfs: Prefer "compatible" modalias wext: fix NULL-ptr-dereference with cfg80211's lack of commit() net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem family KVM: x86/pmu: Fix HW_REF_CPU_CYCLES event pseudo-encoding in intel_arch_events[] mt7601u: fix kernel crash unplugging the device mt7601u: fix rx buffer refcounting y2038: futex: Move compat implementation into futex.c futex: Move futex exit handling into futex code futex: Replace PF_EXITPIDONE with a state exit/exec: Seperate mm_release() futex: Split futex_mm_release() for exit/exec futex: Set task::futex_state to DEAD right after handling futex exit futex: Mark the begin of futex exit explicitly futex: Sanitize exit state handling futex: Provide state handling for exec() as well futex: Add mutex around futex exit futex: Provide distinct return value when owner is exiting futex: Prevent exit livelock ARM: imx: build suspend-imx6.S with arm instruction set netfilter: nft_dynset: add timeout extension to template xfrm: Fix oops in xfrm_replay_advance_bmp RDMA/cxgb4: Fix the reported max_recv_sge value mac80211: pause TX while changing interface type can: dev: prevent potential information leak in can_fill_info() iommu/vt-d: Gracefully handle DMAR units with no supported address widths iommu/vt-d: Don't dereference iommu_device if IOMMU_API is not built NFC: fix resource leak when target index is invalid NFC: fix possible resource leak Linux 4.4.255 UBUNTU: upstream stable to v4.4.255 ** Affects: linux (Ubuntu Xenial) Importance: Medium Assignee: Kamal Mostafa (kamalmostafa) Status: In Progress ** Tags: kernel-stable-tracking-bug ** Changed in: linux (Ubuntu) Status: New => Confirmed ** Tags added: kernel-stable-tracking-bug ** Also affects: linux (Ubuntu Xenial) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Xenial) Status: New => In Progress ** Changed in: linux (Ubuntu Xenial) Assignee: (unassigned) => Kamal Mostafa (kamalmostafa) ** Changed in: linux (Ubuntu Xenial) Importance: Undecided => Medium ** No longer affects: linux (Ubuntu) ** Description changed: + SRU Justification - SRU Justification + Impact: + The upstream process for stable tree updates is quite similar + in scope to the Ubuntu SRU process, e.g., each patch has to + demonstrably fix a bug, and each patch is vetted by upstream + by originating either directly from a mainline/stable Linux tree or + a minimally backported form of that patch. The following upstream + stable patches should be included in the Ubuntu kernel: - Impact: -The upstream process for stable tree updates is quite similar -in scope to the Ubuntu SRU process, e.g., each patch has to -demonstrably fix a bug, and each patch is vetted by upstream -by originating either directly from a mainline/stable Linux tree or -a minimally backported form of that patch. The following upstream -stable patches should be included in the Ubuntu kernel: + v4.4.255 upstream stable release + from git://git.kernel.org/ -v4.4.255 upstream stable release -from git://git.kernel.org/ + ACPI: sysfs: Prefer "compatible" modalias + wext: fix NULL-ptr-dereference with cfg80211's lack of commit() + net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem family + KVM: x86/pmu: Fix HW_REF_CPU_CYCLES event pseudo-encoding in intel_arch_events[] + mt7601u: fix kernel crash unplugging the device + mt7601u: fix rx buffer refcounting + y2038: futex: Move compat implementation into futex.c + futex: Move futex exit handling into futex code + futex: Replace PF_EXITPIDONE with a state + exit/exec: Seperate mm_release() + futex: Split futex_mm_release() for exit/exec + futex: Set task::futex_state to DEAD right after handling futex exit + futex: Mark the begin of futex exit explicitly + futex: Sanitize exit state handling + futex: Provide state handling for exec() as well + futex: Add mutex around futex exit + futex: Provide distinct return value when owner is exiting + futex: Prevent exit livelock + ARM: imx: build suspend-imx6.S with arm instruction set + netfilter: nft_dynset: add timeout extension to template + xfrm: Fix oops in xfrm_replay_advance_bmp + RDMA/cxgb4: Fix the reported max_recv_sge value + mac80211: pause TX while changing interface type + can: dev: prevent
[Kernel-packages] [Bug 1916657] [NEW] Xenial update: v4.4.256 upstream stable release
Public bug reported: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v4.4.256 upstream stable release from git://git.kernel.org/ Linux 4.4.256 UBUNTU: upstream stable to v4.4.256 *Note: It is correct that this stable update is effectively "empty" (just updates the version number in Makefile). ** Affects: linux (Ubuntu Xenial) Importance: Medium Assignee: Kamal Mostafa (kamalmostafa) Status: In Progress ** Tags: kernel-stable-tracking-bug ** Changed in: linux (Ubuntu) Status: New => Confirmed ** Tags added: kernel-stable-tracking-bug ** Also affects: linux (Ubuntu Xenial) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Xenial) Status: New => In Progress ** Changed in: linux (Ubuntu Xenial) Importance: Undecided => Medium ** Changed in: linux (Ubuntu Xenial) Assignee: (unassigned) => Kamal Mostafa (kamalmostafa) ** No longer affects: linux (Ubuntu) ** Description changed: + SRU Justification - SRU Justification + Impact: + The upstream process for stable tree updates is quite similar + in scope to the Ubuntu SRU process, e.g., each patch has to + demonstrably fix a bug, and each patch is vetted by upstream + by originating either directly from a mainline/stable Linux tree or + a minimally backported form of that patch. The following upstream + stable patches should be included in the Ubuntu kernel: - Impact: -The upstream process for stable tree updates is quite similar -in scope to the Ubuntu SRU process, e.g., each patch has to -demonstrably fix a bug, and each patch is vetted by upstream -by originating either directly from a mainline/stable Linux tree or -a minimally backported form of that patch. The following upstream -stable patches should be included in the Ubuntu kernel: + v4.4.256 upstream stable release + from git://git.kernel.org/ -v4.4.256 upstream stable release -from git://git.kernel.org/ + Linux 4.4.256 + UBUNTU: upstream stable to v4.4.256 ** Description changed: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v4.4.256 upstream stable release from git://git.kernel.org/ Linux 4.4.256 UBUNTU: upstream stable to v4.4.256 + + *Note: It is correct that this stable update is effectively "empty" + (just updates the version number in Makefile). -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1916657 Title: Xenial update: v4.4.256 upstream stable release Status in linux source package in Xenial: In Progress Bug description: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v4.4.256 upstream stable release from git://git.kernel.org/ Linux 4.4.256 UBUNTU: upstream stable to v4.4.256 *Note: It is correct that this stable update is effectively "empty" (just updates the version number in Makefile). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/xenial/+source/linux/+bug/1916657/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1914830] Re: Mellanox Patches To Prevent Kernel Hang In MLX4
** Changed in: linux-azure (Ubuntu Bionic) Status: Fix Committed => Fix Released ** Changed in: linux-azure (Ubuntu Focal) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-azure in Ubuntu. https://bugs.launchpad.net/bugs/1914830 Title: Mellanox Patches To Prevent Kernel Hang In MLX4 Status in linux-azure package in Ubuntu: In Progress Status in linux-azure source package in Bionic: Fix Released Status in linux-azure source package in Focal: Fix Released Status in linux-azure source package in Groovy: In Progress Bug description: We have had customer reports of kernel hangs related to MLX4. Mellanox has addressed the issue with the following two patches: fed91613c9dd ("net/mlx4_en: Avoid scheduling restart task if it is already running") ba603d9d7b12 ("net/mlx4_en: Handle TX error CQE") Microsoft would like to request these two commits in all releases supported on Azure. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-azure/+bug/1914830/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1914022] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1914022 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete ** Tags added: focal -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1914022 Title: Netdev watchdog closes link on PowerEdge R6515 Realtek BCM5720 Status in linux package in Ubuntu: Incomplete Bug description: A few months ago we got 3 Dell PowerEdge™ R6515 machines and installed Ubuntu 20.04 LTS. After a few days problems started showing on the network interface for the internal network. The network link is disconnected, and a few seconds later it is connected again. We have updated all the server firmware, checked the cables and switch but the problem persists. Digging deeper in the logs we found this in dmesg (full log in the attached file): [Sat Jan 30 09:57:07 2021] NETDEV WATCHDOG: eno2 (tg3): transmit queue 0 timed out [Sat Jan 30 09:57:07 2021] tg3 :c1:00.1 eno2: transmit timed out, resetting [Sat Jan 30 09:57:08 2021] tg3 :c1:00.1 eno2: Link is down [Sat Jan 30 09:57:12 2021] tg3 :c1:00.1 eno2: Link is up at 1000 Mbps, full duplex For some reason, the link is disconnected and reconnected a few seconds later. This happens randomly on all 3 servers and it does not seem to correlate with the current traffic on that interface. The problem seems to be very similar to Bug #1331513 but this happens on the up to date Ubutnu 20.04 (last updated mid last week). If you need any additional info, feel free to ask. Additional info: -- linux-firmware/now 1.187.8 all linux-image-5.4.0-64-generic/focal-updates,focal-updates,now 5.4.0-64.72 amd64 linux-image-generic/now 5.4.0.64.67 amd64 -- lspci -nnk | grep -iA2 net c1:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f] DeviceName: NIC1 Subsystem: Dell PowerEdge R6515/R7515 LOM [1028:08fd] -- c1:00.1 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f] DeviceName: NIC2 Subsystem: Dell PowerEdge R6515/R7515 LOM [1028:08fd] -- modinfo tg3 | grep ^version version:3.137 -- lshw -C network *-network:0 description: Ethernet interface product: NetXtreme BCM5720 2-port Gigabit Ethernet PCIe vendor: Broadcom Inc. and subsidiaries physical id: 0 bus info: pci@:c1:00.0 logical name: eno1 version: 00 serial: 34:48:ed:ef:07:0e size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.137 duplex=full firmware=FFV21.60.16 bc 5720-v1.39 ip=213.133.114.208 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:160 memory:c703-c703 memory:c704-c704 memory:c705-c705 memory:c710-c713 *-network:1 description: Ethernet interface product: NetXtreme BCM5720 2-port Gigabit Ethernet PCIe vendor: Broadcom Inc. and subsidiaries physical id: 0.1 bus info: pci@:c1:00.1 logical name: eno2 version: 00 serial: 34:48:ed:ef:07:0f size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.137 duplex=full firmware=FFV21.60.16 bc 5720-v1.39 ip=10.0.1.6 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:163 memory:c700-c700 memory:c701-c701 memory:c702-c702 memory:c714-c717 ethtool --show-offload eno2 Features for eno2: rx-checksumming: on tx-checksumming: on
[Kernel-packages] [Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05
"This bug was fixed in the package linux - 5.4.0-66.74" Wait, current kernel in Ubuntu 20.04.2 is 5.8 so can I expect to have it working on Ubuntu 20.04.2 without any hassle or I have to switch kernel? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1887190 Title: MSFT Touchpad not working on Lenovo Legion-5 15ARH05 Status in Pop!_OS: New Status in linux package in Ubuntu: Fix Released Status in xserver-xorg-input-libinput package in Ubuntu: Confirmed Status in linux package in Arch Linux: Fix Committed Status in linux package in Fedora: Confirmed Status in linux package in openSUSE: New Bug description: Update (based on #296) = The latest kernel tree (https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git) has the complete solution to fix this bug. So we can expect kernel v5.11 to fix this issue without any additional work. Before the release of v5.11, you are suggested to use #189 to save your touchpad. Note that for distributions like Ubuntu and Fedora, the pinctrl-amd driver is built into the initramfs. So you have to rebuild the initramfs after replacing the old module with new one. On Fedora, run `sudo dracut --force`; On ubuntu, run `sudo update-initramfs -u`. The complete solution is three patches, - 47a0001436352c9853d72bf2071e85b316d688a2 ("pinctrl: amd: remove debounce filter setting in IRQ type setting") - 06abe8291bc31839950f7d0362d9979edc88a666 ("pinctrl: amd: fix incorrect way to disable debounce filter") - 8dcb7a15a585b6d0fee15751ce11d7a68cfedd56 ("gpiolib: acpi: Take into account debounce settings") The first two patches has reached the stable tree. If the last one is also backported to LTS kernel, you won't need to install kernel 5.11. But I don't know when this will happen. Original bug report === Hello The MSFT touchpad of this Lenovo Legion-5 15ARH05 laptop is not reacting at all (pointer and click never move when touchpad is touched). This has been reported by other users in various websites, with various linux systems including other Ubuntu systems, but I saw no launchpad bug so I post one. Example of websites covering the issue : - https://askubuntu.com/questions/1253830/lenovo-legion-5-touchpad (exactly the same laptop) - https://www.linux.org/threads/lenovo-legion-5-touchpad.29536/ (similar laptop) xinput indentifies it as MSFT0001:00 04F3:3140 Virtual core pointer id=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ MSFT0001:00 04F3:3140 Touchpad id=17 [slave pointer (2)] ⎜ ↳ MSFT0001:00 04F3:3140 Mouse id=16 [slave pointer (2)] ⎜ ↳ ITE Tech. Inc. ITE Device(8910) Consumer Controlid=12 [slave pointer (2)] ⎜ ↳ Logitech USB Optical Mouse id=11 [slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Ideapad extra buttons id=15 [slave keyboard (3)] ↳ Power Buttonid=6[slave keyboard (3)] ↳ Integrated Camera: Integrated C id=10 [slave keyboard (3)] ↳ Video Bus id=7[slave keyboard (3)] ↳ ITE Tech. Inc. ITE Device(8910) Consumer Controlid=19 [slave keyboard (3)] ↳ Power Buttonid=9[slave keyboard (3)] ↳ ITE Tech. Inc. ITE Device(8910) Wireless Radio Control id=13 [slave keyboard (3)] ↳ ITE Tech. Inc. ITE Device(8910) Keyboardid=14 [slave keyboard (3)] ↳ AT Translated Set 2 keyboardid=18 [slave keyboard (3)] ↳ Video Bus id=8[slave keyboard (3)] Thanks a lot for your time. It does not help, but I can confirm what was reported on askubuntu by another user : the touchpad does work on Windows. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-40-generic 5.4.0-40.44 ProcVersionSignature: Ubuntu 5.4.0-40.44-generic 5.4.44 Uname: Linux 5.4.0-40-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: nicolas1567 F pulseaudio /dev/snd/controlC1: nicolas1567 F pulseaudio /dev/snd/controlC2: nicolas1567 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Fri Jul 10 20:14:25 2020 InstallationDate: Installed on 2020-07-02 (8 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal
[Kernel-packages] [Bug 1914022] Re: Netdev watchdog closes link on PowerEdge R6515 Realtek BCM5720
On second thought, nevermind, I was able to do it. There does not appear to be any identifying information in this summary so I've been able to mark this public and moved it to the appropriate project. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1914022 Title: Netdev watchdog closes link on PowerEdge R6515 Realtek BCM5720 Status in linux package in Ubuntu: New Bug description: A few months ago we got 3 Dell PowerEdge™ R6515 machines and installed Ubuntu 20.04 LTS. After a few days problems started showing on the network interface for the internal network. The network link is disconnected, and a few seconds later it is connected again. We have updated all the server firmware, checked the cables and switch but the problem persists. Digging deeper in the logs we found this in dmesg (full log in the attached file): [Sat Jan 30 09:57:07 2021] NETDEV WATCHDOG: eno2 (tg3): transmit queue 0 timed out [Sat Jan 30 09:57:07 2021] tg3 :c1:00.1 eno2: transmit timed out, resetting [Sat Jan 30 09:57:08 2021] tg3 :c1:00.1 eno2: Link is down [Sat Jan 30 09:57:12 2021] tg3 :c1:00.1 eno2: Link is up at 1000 Mbps, full duplex For some reason, the link is disconnected and reconnected a few seconds later. This happens randomly on all 3 servers and it does not seem to correlate with the current traffic on that interface. The problem seems to be very similar to Bug #1331513 but this happens on the up to date Ubutnu 20.04 (last updated mid last week). If you need any additional info, feel free to ask. Additional info: -- linux-firmware/now 1.187.8 all linux-image-5.4.0-64-generic/focal-updates,focal-updates,now 5.4.0-64.72 amd64 linux-image-generic/now 5.4.0.64.67 amd64 -- lspci -nnk | grep -iA2 net c1:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f] DeviceName: NIC1 Subsystem: Dell PowerEdge R6515/R7515 LOM [1028:08fd] -- c1:00.1 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f] DeviceName: NIC2 Subsystem: Dell PowerEdge R6515/R7515 LOM [1028:08fd] -- modinfo tg3 | grep ^version version:3.137 -- lshw -C network *-network:0 description: Ethernet interface product: NetXtreme BCM5720 2-port Gigabit Ethernet PCIe vendor: Broadcom Inc. and subsidiaries physical id: 0 bus info: pci@:c1:00.0 logical name: eno1 version: 00 serial: 34:48:ed:ef:07:0e size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.137 duplex=full firmware=FFV21.60.16 bc 5720-v1.39 ip=213.133.114.208 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:160 memory:c703-c703 memory:c704-c704 memory:c705-c705 memory:c710-c713 *-network:1 description: Ethernet interface product: NetXtreme BCM5720 2-port Gigabit Ethernet PCIe vendor: Broadcom Inc. and subsidiaries physical id: 0.1 bus info: pci@:c1:00.1 logical name: eno2 version: 00 serial: 34:48:ed:ef:07:0f size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.137 duplex=full firmware=FFV21.60.16 bc 5720-v1.39 ip=10.0.1.6 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:163 memory:c700-c700 memory:c701-c701 memory:c702-c702 memory:c714-c717 ethtool --show-offload eno2 Features for eno2: rx-checksumming: on tx-checksumming: on tx-checksum-ipv4: on tx-checksum-ip-generic: off [fixed] tx-checksum-ipv6: on tx-checksum-fcoe-crc: off [fixed] tx-checksum-sctp: off [fixed] scatter-gather: on tx-scatter-gather: on tx-scatter-gather-fraglist: off [fixed] tcp-segmentation-offload: on tx-tcp-segmentation: on tx-tcp-ecn-segmentation: on tx-tcp-mangleid-segmentation: off
[Kernel-packages] [Bug 1914022] Re: Netdev watchdog closes link on PowerEdge R6515 Realtek BCM5720
Hi. I think you've filed this bug in the wrong place. Please file a public kernel bug here: https://bugs.launchpad.net/ubuntu/+source/linux/+filebug Thank you, Jeff ** Information type changed from Proprietary to Public ** Project changed: dell-poweredge => linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1914022 Title: Netdev watchdog closes link on PowerEdge R6515 Realtek BCM5720 Status in linux package in Ubuntu: New Bug description: A few months ago we got 3 Dell PowerEdge™ R6515 machines and installed Ubuntu 20.04 LTS. After a few days problems started showing on the network interface for the internal network. The network link is disconnected, and a few seconds later it is connected again. We have updated all the server firmware, checked the cables and switch but the problem persists. Digging deeper in the logs we found this in dmesg (full log in the attached file): [Sat Jan 30 09:57:07 2021] NETDEV WATCHDOG: eno2 (tg3): transmit queue 0 timed out [Sat Jan 30 09:57:07 2021] tg3 :c1:00.1 eno2: transmit timed out, resetting [Sat Jan 30 09:57:08 2021] tg3 :c1:00.1 eno2: Link is down [Sat Jan 30 09:57:12 2021] tg3 :c1:00.1 eno2: Link is up at 1000 Mbps, full duplex For some reason, the link is disconnected and reconnected a few seconds later. This happens randomly on all 3 servers and it does not seem to correlate with the current traffic on that interface. The problem seems to be very similar to Bug #1331513 but this happens on the up to date Ubutnu 20.04 (last updated mid last week). If you need any additional info, feel free to ask. Additional info: -- linux-firmware/now 1.187.8 all linux-image-5.4.0-64-generic/focal-updates,focal-updates,now 5.4.0-64.72 amd64 linux-image-generic/now 5.4.0.64.67 amd64 -- lspci -nnk | grep -iA2 net c1:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f] DeviceName: NIC1 Subsystem: Dell PowerEdge R6515/R7515 LOM [1028:08fd] -- c1:00.1 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f] DeviceName: NIC2 Subsystem: Dell PowerEdge R6515/R7515 LOM [1028:08fd] -- modinfo tg3 | grep ^version version:3.137 -- lshw -C network *-network:0 description: Ethernet interface product: NetXtreme BCM5720 2-port Gigabit Ethernet PCIe vendor: Broadcom Inc. and subsidiaries physical id: 0 bus info: pci@:c1:00.0 logical name: eno1 version: 00 serial: 34:48:ed:ef:07:0e size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.137 duplex=full firmware=FFV21.60.16 bc 5720-v1.39 ip=213.133.114.208 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:160 memory:c703-c703 memory:c704-c704 memory:c705-c705 memory:c710-c713 *-network:1 description: Ethernet interface product: NetXtreme BCM5720 2-port Gigabit Ethernet PCIe vendor: Broadcom Inc. and subsidiaries physical id: 0.1 bus info: pci@:c1:00.1 logical name: eno2 version: 00 serial: 34:48:ed:ef:07:0f size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.137 duplex=full firmware=FFV21.60.16 bc 5720-v1.39 ip=10.0.1.6 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:163 memory:c700-c700 memory:c701-c701 memory:c702-c702 memory:c714-c717 ethtool --show-offload eno2 Features for eno2: rx-checksumming: on tx-checksumming: on tx-checksum-ipv4: on tx-checksum-ip-generic: off [fixed] tx-checksum-ipv6: on tx-checksum-fcoe-crc: off [fixed] tx-checksum-sctp: off [fixed] scatter-gather: on tx-scatter-gather: on tx-scatter-gather-fraglist: off [fixed] tcp-segmentation-offload: on tx-tcp-segmentation: on
[Kernel-packages] [Bug 1861936] Re: Raspberry Pi 3 network dies shortly after a burst of IPv6 tunnel network load ((lan78xx): transmit queue 0 timed out)
NB: Have been informed that this will trickle down from upstream into the 5.10 kernels for Raspberry Pi OS as well. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-raspi2 in Ubuntu. https://bugs.launchpad.net/bugs/1861936 Title: Raspberry Pi 3 network dies shortly after a burst of IPv6 tunnel network load ((lan78xx): transmit queue 0 timed out) Status in linux-raspi package in Ubuntu: Incomplete Status in linux-raspi2 package in Ubuntu: Incomplete Status in linux-raspi2 source package in Eoan: Won't Fix Status in linux-raspi source package in Focal: Fix Committed Status in linux-raspi source package in Groovy: Fix Committed Bug description: [Impact] A mix of incoming TCP traffic, forwarding packets and saturating the link results in lan78xx TX queue timeouts which brings the network interface down. [Test Case] Se comment #99 below. [Where Problems Could Occur] Probably lost or corrupted TCP packets. Most likely not worse than what we're currently seeing. [Original Description] Desciption changed: Raspberry Pi 3 network partially dies (transmission doesn't work, reception still does) shortly after a burst of network load over IPv6, when IPv6 connectivity is provided by a tunnel from tunnelbroker.net. The triggering load is typically an HTTP(S) download, and replication can be done without actually saving the file (wget -O /dev/null ...). Problem happens within downloading ~10 GB, usually withinthe first 1 GB of traffic) Replication is 100% as long as _all_ of the following conditions are met - 6in4 tunnel to HE.net set up with netplan - ipv6 rules applied (netfilter-persistent) - ipv6 forwarding enabled (edit /etc/sysctl.conf) kern.log message that appears after a while: Feb 4 23:42:59 rpi3 kernel: [ 571.878359] [ cut here ] Feb 4 23:42:59 rpi3 kernel: [ 571.878420] NETDEV WATCHDOG: eth0 (lan78xx): transmit queue 0 timed out Feb 4 23:42:59 rpi3 kernel: [ 571.878550] WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:447 dev_watchdog+0x324/0x330 Feb 4 23:42:59 rpi3 kernel: [ 571.878557] Modules linked in: sit tunnel4 ip_tunnel bridge stp llc ip6table_filter ip6_tables xt_tcpudp xt_conntrack nf_conntrack iptable_filter bpfilter nls_ascii dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua btsdio bluetooth ecdh_generic ecc brcmfmac brcmutil cfg80211 bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) input_leds vc_sm_cma(CE) v4l2_common videobuf2_vmalloc spidev videobuf2_memops videobuf2_v4l2 raspberrypi_hwmon videobuf2_common videodev mc uio_pdrv_genirq uio sch_fq_codel jool(OE) jool_common(OE) nf_defrag_ipv6 nf_defrag_ipv4 ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid crct10dif_ce sdhci_iproc phy_generic fixed aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 Feb 4 23:42:59 rpi3 kernel: [ 571.878774] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G C OE 5.3.0-1017-raspi2 #19-Ubuntu Feb 4 23:42:59 rpi3 kernel: [ 571.878781] Hardware name: Raspberry Pi 3 Model B Plus Rev 1.3 (DT) Feb 4 23:42:59 rpi3 kernel: [ 571.878789] pstate: 6045 (nZCv daif +PAN -UAO) Feb 4 23:42:59 rpi3 kernel: [ 571.878800] pc : dev_watchdog+0x324/0x330 Feb 4 23:42:59 rpi3 kernel: [ 571.878807] lr : dev_watchdog+0x324/0x330 Feb 4 23:42:59 rpi3 kernel: [ 571.878812] sp : 1001bd60 Feb 4 23:42:59 rpi3 kernel: [ 571.878817] x29: 1001bd60 x28: 0140 Feb 4 23:42:59 rpi3 kernel: [ 571.878827] x27: x26: Feb 4 23:42:59 rpi3 kernel: [ 571.878836] x25: 8ecbefa4e000 x24: 305e0f529018 Feb 4 23:42:59 rpi3 kernel: [ 571.878845] x23: x22: 0001 Feb 4 23:42:59 rpi3 kernel: [ 571.878853] x21: 8ecbefa4e480 x20: 305e0f807000 Feb 4 23:42:59 rpi3 kernel: [ 571.878862] x19: x18: Feb 4 23:42:59 rpi3 kernel: [ 571.878871] x17: 10fd8218 x16: 305e0e30efb8 Feb 4 23:42:59 rpi3 kernel: [ 571.878879] x15: 8ecbf922a290 x14: Feb 4 23:42:59 rpi3 kernel: [ 571.87] x13: x12: 305e0f944000 Feb 4 23:42:59 rpi3 kernel: [ 571.878897] x11: 305e0f82d000 x10: Feb 4 23:42:59 rpi3 kernel: [ 571.878905] x9 : 0004 x8 : 017f Feb 4 23:42:59 rpi3 kernel: [ 571.878913] x7 : x6 : 0001 Feb 4 23:42:59 rpi3 kernel: [ 571.878921] x5 : x4 : 0008 Feb 4 23:42:59 rpi3 kernel: [ 571.878929] x3 : 305e0ee15750 x2 : 0004 Feb 4 23:42:59 rpi3 kernel: [ 571.878937] x1 : 6abb42c67c954600 x0 : Feb 4 23:42:59 rpi3 kernel: [ 571.878946] Call
[Kernel-packages] [Bug 1914022] [NEW] Netdev watchdog closes link on PowerEdge R6515 Realtek BCM5720
You have been subscribed to a public bug: A few months ago we got 3 Dell PowerEdge™ R6515 machines and installed Ubuntu 20.04 LTS. After a few days problems started showing on the network interface for the internal network. The network link is disconnected, and a few seconds later it is connected again. We have updated all the server firmware, checked the cables and switch but the problem persists. Digging deeper in the logs we found this in dmesg (full log in the attached file): [Sat Jan 30 09:57:07 2021] NETDEV WATCHDOG: eno2 (tg3): transmit queue 0 timed out [Sat Jan 30 09:57:07 2021] tg3 :c1:00.1 eno2: transmit timed out, resetting [Sat Jan 30 09:57:08 2021] tg3 :c1:00.1 eno2: Link is down [Sat Jan 30 09:57:12 2021] tg3 :c1:00.1 eno2: Link is up at 1000 Mbps, full duplex For some reason, the link is disconnected and reconnected a few seconds later. This happens randomly on all 3 servers and it does not seem to correlate with the current traffic on that interface. The problem seems to be very similar to Bug #1331513 but this happens on the up to date Ubutnu 20.04 (last updated mid last week). If you need any additional info, feel free to ask. Additional info: -- linux-firmware/now 1.187.8 all linux-image-5.4.0-64-generic/focal-updates,focal-updates,now 5.4.0-64.72 amd64 linux-image-generic/now 5.4.0.64.67 amd64 -- lspci -nnk | grep -iA2 net c1:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f] DeviceName: NIC1 Subsystem: Dell PowerEdge R6515/R7515 LOM [1028:08fd] -- c1:00.1 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f] DeviceName: NIC2 Subsystem: Dell PowerEdge R6515/R7515 LOM [1028:08fd] -- modinfo tg3 | grep ^version version:3.137 -- lshw -C network *-network:0 description: Ethernet interface product: NetXtreme BCM5720 2-port Gigabit Ethernet PCIe vendor: Broadcom Inc. and subsidiaries physical id: 0 bus info: pci@:c1:00.0 logical name: eno1 version: 00 serial: 34:48:ed:ef:07:0e size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.137 duplex=full firmware=FFV21.60.16 bc 5720-v1.39 ip=213.133.114.208 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:160 memory:c703-c703 memory:c704-c704 memory:c705-c705 memory:c710-c713 *-network:1 description: Ethernet interface product: NetXtreme BCM5720 2-port Gigabit Ethernet PCIe vendor: Broadcom Inc. and subsidiaries physical id: 0.1 bus info: pci@:c1:00.1 logical name: eno2 version: 00 serial: 34:48:ed:ef:07:0f size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.137 duplex=full firmware=FFV21.60.16 bc 5720-v1.39 ip=10.0.1.6 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:163 memory:c700-c700 memory:c701-c701 memory:c702-c702 memory:c714-c717 ethtool --show-offload eno2 Features for eno2: rx-checksumming: on tx-checksumming: on tx-checksum-ipv4: on tx-checksum-ip-generic: off [fixed] tx-checksum-ipv6: on tx-checksum-fcoe-crc: off [fixed] tx-checksum-sctp: off [fixed] scatter-gather: on tx-scatter-gather: on tx-scatter-gather-fraglist: off [fixed] tcp-segmentation-offload: on tx-tcp-segmentation: on tx-tcp-ecn-segmentation: on tx-tcp-mangleid-segmentation: off tx-tcp6-segmentation: on generic-segmentation-offload: on generic-receive-offload: on large-receive-offload: off [fixed] rx-vlan-offload: on [fixed] tx-vlan-offload: on [fixed] ntuple-filters: off [fixed] receive-hashing: off [fixed] highdma: on rx-vlan-filter: off [fixed] vlan-challenged: off [fixed] tx-lockless: off [fixed] netns-local: off [fixed] tx-gso-robust: off [fixed] tx-fcoe-segmentation: off [fixed] tx-gre-segmentation: off [fixed] tx-gre-csum-segmentation: off [fixed] tx-ipxip4-segmentation: off [fixed] tx-ipxip6-segmentation: off [fixed] tx-udp_tnl-segmentation: off [fixed] tx-udp_tnl-csum-segmentation: off
[Kernel-packages] [Bug 1910749] Re: stop building nvidia dkms on kernels with no lrm
This bug was fixed in the package linux-kvm - 4.15.0-1085.87 --- linux-kvm (4.15.0-1085.87) bionic; urgency=medium * bionic/linux-kvm: 4.15.0-1085.87 -proposed tracker (LP: #1913110) * stop building nvidia dkms on kernels with no lrm (LP: #1910749) - [Packaging]: Stop building nvidia dkms [ Ubuntu: 4.15.0-136.140 ] * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time - arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. - iwlwifi: mvm: fix kernel panic in case of assert during CSA - ARC: stack unwinding: don't assume non-current task is sleeping - scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE - soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - kbuild: avoid static_assert for genksyms - scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" - x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP - PCI: qcom: Add missing reset for ipq806x - net: stmmac: free tx skb buffer in stmmac_resume() - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net/mlx4_en: Avoid scheduling restart task if it is already running - net/mlx4_en: Handle TX error CQE - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux - net: bridge: vlan: fix error return code in __vlan_add() - mac80211: mesh: fix mesh_pathtbl_init() error path - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: UAS: introduce a quirk to set no_write_same - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling - drm/tegra:
[Kernel-packages] [Bug 1911331] Re: Bionic update: upstream stable patchset 2021-01-12
This bug was fixed in the package linux-snapdragon - 4.15.0-1096.105 --- linux-snapdragon (4.15.0-1096.105) bionic; urgency=medium * bionic/linux-snapdragon: 4.15.0-1096.105 -proposed tracker (LP: #1913094) * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - [Config] snapdragon: updateconfigs for USB_SISUSBVGA_CON [ Ubuntu: 4.15.0-136.140 ] * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time - arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. - iwlwifi: mvm: fix kernel panic in case of assert during CSA - ARC: stack unwinding: don't assume non-current task is sleeping - scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE - soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - kbuild: avoid static_assert for genksyms - scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" - x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP - PCI: qcom: Add missing reset for ipq806x - net: stmmac: free tx skb buffer in stmmac_resume() - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net/mlx4_en: Avoid scheduling restart task if it is already running - net/mlx4_en: Handle TX error CQE - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux - net: bridge: vlan: fix error return code in __vlan_add() - mac80211: mesh: fix mesh_pathtbl_init() error path - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: UAS: introduce a quirk to set no_write_same - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - kernel/cpu: add arch override for
[Kernel-packages] [Bug 1911331] Re: Bionic update: upstream stable patchset 2021-01-12
This bug was fixed in the package linux-raspi2 - 4.15.0-1079.84 --- linux-raspi2 (4.15.0-1079.84) bionic; urgency=medium * bionic/linux-raspi2: 4.15.0-1079.84 -proposed tracker (LP: #1913092) * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - [Config] raspi2: updateconfigs for USB_SISUSBVGA_CON [ Ubuntu: 4.15.0-136.140 ] * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time - arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. - iwlwifi: mvm: fix kernel panic in case of assert during CSA - ARC: stack unwinding: don't assume non-current task is sleeping - scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE - soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - kbuild: avoid static_assert for genksyms - scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" - x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP - PCI: qcom: Add missing reset for ipq806x - net: stmmac: free tx skb buffer in stmmac_resume() - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net/mlx4_en: Avoid scheduling restart task if it is already running - net/mlx4_en: Handle TX error CQE - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux - net: bridge: vlan: fix error return code in __vlan_add() - mac80211: mesh: fix mesh_pathtbl_init() error path - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: UAS: introduce a quirk to set no_write_same - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm
[Kernel-packages] [Bug 1908571] Re: Enable boot from NVMe device for all images
This bug was fixed in the package linux-azure-4.15 - 4.15.0-1108.120 --- linux-azure-4.15 (4.15.0-1108.120) bionic; urgency=medium * bionic/linux-azure-4.15: 4.15.0-1108.120 -proposed tracker (LP: #1915371) * Add XDP support to hv_netvsc driver (LP: #1877654) - hv_netvsc: pass netvsc_device to receive callback - xdp: base API for new XDP rx-queue info concept - ixgbe: setup xdp_rxq_info - xdp/qede: setup xdp_rxq_info and intro xdp_rxq_info_is_reg - tun: setup xdp_rxq_info - virtio_net: setup xdp_rxq_info - xdp: generic XDP handling of xdp_rxq_info - tun/tap: use ptr_ring instead of skb_array - tuntap: XDP transmission - net: avoid including xdp.h in filter.h - virtio_net: fix ndo_xdp_xmit crash towards dev not ready for XDP - tuntap: XDP_TX can use native XDP - i40e: add support for XDP_REDIRECT - xdp: introduce xdp_return_frame API and use in cpumap - ixgbe: use xdp_return_frame API - xdp: move struct xdp_buff from filter.h to xdp.h - xdp: introduce a new xdp_frame type - tun: convert to use generic xdp_frame and xdp_return_frame API - virtio_net: convert to use generic xdp_frame and xdp_return_frame API - bpf: cpumap convert to use generic xdp_frame - i40e: convert to use generic xdp_frame and xdp_return_frame API - xdp: rhashtable with allocator ID to pointer mapping - page_pool: refurbish version of page_pool code - xdp: allow page_pool as an allocator type in xdp_return_frame - xdp: transition into using xdp_frame for return API - xdp: transition into using xdp_frame for ndo_xdp_xmit - xsk: add user memory registration support sockopt - xsk: add umem fill queue support and mmap - xsk: add Rx queue setup and mmap support - xsk: add support for bind for Rx - xsk: add Rx receive functions and poll support - bpf: devmap introduce dev_map_enqueue - bpf: devmap prepare xdp frames for bulking - xdp: introduce xdp_return_frame_rx_napi - xdp: add MEM_TYPE_ZERO_COPY - hv_netvsc: Add support for LRO/RSC in the vSwitch - hv_netvsc: Refactor assignments of struct netvsc_device_info - hv_netvsc: Add XDP support - hv_netvsc: Update document for XDP support - hv_netvsc: Fix XDP refcnt for synthetic and VF NICs * Sync FSGSBASE patches in azure kernel with mainline (LP: #1913294) - x86/kvm/vmx: read MSR_{FS, KERNEL_GS}_BASE from current->thread - x86/process/64: Make save_fsgs_for_kvm() ready for FSGSBASE - x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM * Disable Atari partition support for cloud kernels (LP: #1908264) - [Config] azure: Disable ATARI_PARTITION * Enable boot from NVMe device for all images (LP: #1908571) - [Config] azure: CONFIG_PCI_HYPERV=y [ Ubuntu: 4.15.0-136.140 ] * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time -
[Kernel-packages] [Bug 1910291] Re: update ENA driver, incl. new ethtool stats
This bug was fixed in the package linux - 4.15.0-136.140 --- linux (4.15.0-136.140) bionic; urgency=medium * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time - arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. - iwlwifi: mvm: fix kernel panic in case of assert during CSA - ARC: stack unwinding: don't assume non-current task is sleeping - scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE - soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - kbuild: avoid static_assert for genksyms - scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" - x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP - PCI: qcom: Add missing reset for ipq806x - net: stmmac: free tx skb buffer in stmmac_resume() - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net/mlx4_en: Avoid scheduling restart task if it is already running - net/mlx4_en: Handle TX error CQE - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux - net: bridge: vlan: fix error return code in __vlan_add() - mac80211: mesh: fix mesh_pathtbl_init() error path - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: UAS: introduce a quirk to set no_write_same - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling - drm/tegra: sor: Disable clocks on error in tegra_sor_init() - vxlan: Add needed_headroom for lower device - vxlan: Copy needed_tailroom from lowerdev - scsi: mpt3sas: Increase IOCInit request timeout to 30s - dm
[Kernel-packages] [Bug 1840488] Re: Disable Bluetooth in cloud kernels
This bug was fixed in the package linux-aws - 4.15.0-1094.101 --- linux-aws (4.15.0-1094.101) bionic; urgency=medium * bionic/linux-aws: 4.15.0-1094.101 -proposed tracker (LP: #1913097) * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - [Config] aws: Update config for USB_SISUSBVGA_CON * Disable Bluetooth in cloud kernels (LP: #1840488) - aws: [Config] disable CONFIG_BT - aws: [Config] remove disabled BT modules * aws: properly support instance types with > 255 cpu cores (LP: #1913739) - iommu/vt-d: Gracefully handle DMAR units with no supported address widths [ Ubuntu: 4.15.0-136.140 ] * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time - arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. - iwlwifi: mvm: fix kernel panic in case of assert during CSA - ARC: stack unwinding: don't assume non-current task is sleeping - scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE - soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - kbuild: avoid static_assert for genksyms - scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" - x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP - PCI: qcom: Add missing reset for ipq806x - net: stmmac: free tx skb buffer in stmmac_resume() - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net/mlx4_en: Avoid scheduling restart task if it is already running - net/mlx4_en: Handle TX error CQE - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux - net: bridge: vlan: fix error return code in __vlan_add() - mac80211: mesh: fix mesh_pathtbl_init() error path - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: UAS: introduce a quirk to set no_write_same - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - gpio:
[Kernel-packages] [Bug 1877654] Re: Add XDP support to hv_netvsc driver
This bug was fixed in the package linux-azure-4.15 - 4.15.0-1108.120 --- linux-azure-4.15 (4.15.0-1108.120) bionic; urgency=medium * bionic/linux-azure-4.15: 4.15.0-1108.120 -proposed tracker (LP: #1915371) * Add XDP support to hv_netvsc driver (LP: #1877654) - hv_netvsc: pass netvsc_device to receive callback - xdp: base API for new XDP rx-queue info concept - ixgbe: setup xdp_rxq_info - xdp/qede: setup xdp_rxq_info and intro xdp_rxq_info_is_reg - tun: setup xdp_rxq_info - virtio_net: setup xdp_rxq_info - xdp: generic XDP handling of xdp_rxq_info - tun/tap: use ptr_ring instead of skb_array - tuntap: XDP transmission - net: avoid including xdp.h in filter.h - virtio_net: fix ndo_xdp_xmit crash towards dev not ready for XDP - tuntap: XDP_TX can use native XDP - i40e: add support for XDP_REDIRECT - xdp: introduce xdp_return_frame API and use in cpumap - ixgbe: use xdp_return_frame API - xdp: move struct xdp_buff from filter.h to xdp.h - xdp: introduce a new xdp_frame type - tun: convert to use generic xdp_frame and xdp_return_frame API - virtio_net: convert to use generic xdp_frame and xdp_return_frame API - bpf: cpumap convert to use generic xdp_frame - i40e: convert to use generic xdp_frame and xdp_return_frame API - xdp: rhashtable with allocator ID to pointer mapping - page_pool: refurbish version of page_pool code - xdp: allow page_pool as an allocator type in xdp_return_frame - xdp: transition into using xdp_frame for return API - xdp: transition into using xdp_frame for ndo_xdp_xmit - xsk: add user memory registration support sockopt - xsk: add umem fill queue support and mmap - xsk: add Rx queue setup and mmap support - xsk: add support for bind for Rx - xsk: add Rx receive functions and poll support - bpf: devmap introduce dev_map_enqueue - bpf: devmap prepare xdp frames for bulking - xdp: introduce xdp_return_frame_rx_napi - xdp: add MEM_TYPE_ZERO_COPY - hv_netvsc: Add support for LRO/RSC in the vSwitch - hv_netvsc: Refactor assignments of struct netvsc_device_info - hv_netvsc: Add XDP support - hv_netvsc: Update document for XDP support - hv_netvsc: Fix XDP refcnt for synthetic and VF NICs * Sync FSGSBASE patches in azure kernel with mainline (LP: #1913294) - x86/kvm/vmx: read MSR_{FS, KERNEL_GS}_BASE from current->thread - x86/process/64: Make save_fsgs_for_kvm() ready for FSGSBASE - x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM * Disable Atari partition support for cloud kernels (LP: #1908264) - [Config] azure: Disable ATARI_PARTITION * Enable boot from NVMe device for all images (LP: #1908571) - [Config] azure: CONFIG_PCI_HYPERV=y [ Ubuntu: 4.15.0-136.140 ] * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time -
[Kernel-packages] [Bug 1908264] Re: Disable Atari partition support for cloud kernels
This bug was fixed in the package linux-azure-4.15 - 4.15.0-1108.120 --- linux-azure-4.15 (4.15.0-1108.120) bionic; urgency=medium * bionic/linux-azure-4.15: 4.15.0-1108.120 -proposed tracker (LP: #1915371) * Add XDP support to hv_netvsc driver (LP: #1877654) - hv_netvsc: pass netvsc_device to receive callback - xdp: base API for new XDP rx-queue info concept - ixgbe: setup xdp_rxq_info - xdp/qede: setup xdp_rxq_info and intro xdp_rxq_info_is_reg - tun: setup xdp_rxq_info - virtio_net: setup xdp_rxq_info - xdp: generic XDP handling of xdp_rxq_info - tun/tap: use ptr_ring instead of skb_array - tuntap: XDP transmission - net: avoid including xdp.h in filter.h - virtio_net: fix ndo_xdp_xmit crash towards dev not ready for XDP - tuntap: XDP_TX can use native XDP - i40e: add support for XDP_REDIRECT - xdp: introduce xdp_return_frame API and use in cpumap - ixgbe: use xdp_return_frame API - xdp: move struct xdp_buff from filter.h to xdp.h - xdp: introduce a new xdp_frame type - tun: convert to use generic xdp_frame and xdp_return_frame API - virtio_net: convert to use generic xdp_frame and xdp_return_frame API - bpf: cpumap convert to use generic xdp_frame - i40e: convert to use generic xdp_frame and xdp_return_frame API - xdp: rhashtable with allocator ID to pointer mapping - page_pool: refurbish version of page_pool code - xdp: allow page_pool as an allocator type in xdp_return_frame - xdp: transition into using xdp_frame for return API - xdp: transition into using xdp_frame for ndo_xdp_xmit - xsk: add user memory registration support sockopt - xsk: add umem fill queue support and mmap - xsk: add Rx queue setup and mmap support - xsk: add support for bind for Rx - xsk: add Rx receive functions and poll support - bpf: devmap introduce dev_map_enqueue - bpf: devmap prepare xdp frames for bulking - xdp: introduce xdp_return_frame_rx_napi - xdp: add MEM_TYPE_ZERO_COPY - hv_netvsc: Add support for LRO/RSC in the vSwitch - hv_netvsc: Refactor assignments of struct netvsc_device_info - hv_netvsc: Add XDP support - hv_netvsc: Update document for XDP support - hv_netvsc: Fix XDP refcnt for synthetic and VF NICs * Sync FSGSBASE patches in azure kernel with mainline (LP: #1913294) - x86/kvm/vmx: read MSR_{FS, KERNEL_GS}_BASE from current->thread - x86/process/64: Make save_fsgs_for_kvm() ready for FSGSBASE - x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM * Disable Atari partition support for cloud kernels (LP: #1908264) - [Config] azure: Disable ATARI_PARTITION * Enable boot from NVMe device for all images (LP: #1908571) - [Config] azure: CONFIG_PCI_HYPERV=y [ Ubuntu: 4.15.0-136.140 ] * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time -
[Kernel-packages] [Bug 1910599] Re: Bionic update: upstream stable patchset 2021-01-07
This bug was fixed in the package linux - 4.15.0-136.140 --- linux (4.15.0-136.140) bionic; urgency=medium * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time - arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. - iwlwifi: mvm: fix kernel panic in case of assert during CSA - ARC: stack unwinding: don't assume non-current task is sleeping - scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE - soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - kbuild: avoid static_assert for genksyms - scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" - x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP - PCI: qcom: Add missing reset for ipq806x - net: stmmac: free tx skb buffer in stmmac_resume() - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net/mlx4_en: Avoid scheduling restart task if it is already running - net/mlx4_en: Handle TX error CQE - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux - net: bridge: vlan: fix error return code in __vlan_add() - mac80211: mesh: fix mesh_pathtbl_init() error path - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: UAS: introduce a quirk to set no_write_same - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling - drm/tegra: sor: Disable clocks on error in tegra_sor_init() - vxlan: Add needed_headroom for lower device - vxlan: Copy needed_tailroom from lowerdev - scsi: mpt3sas: Increase IOCInit request timeout to 30s - dm
[Kernel-packages] [Bug 1911331] Re: Bionic update: upstream stable patchset 2021-01-12
This bug was fixed in the package linux-aws - 4.15.0-1094.101 --- linux-aws (4.15.0-1094.101) bionic; urgency=medium * bionic/linux-aws: 4.15.0-1094.101 -proposed tracker (LP: #1913097) * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - [Config] aws: Update config for USB_SISUSBVGA_CON * Disable Bluetooth in cloud kernels (LP: #1840488) - aws: [Config] disable CONFIG_BT - aws: [Config] remove disabled BT modules * aws: properly support instance types with > 255 cpu cores (LP: #1913739) - iommu/vt-d: Gracefully handle DMAR units with no supported address widths [ Ubuntu: 4.15.0-136.140 ] * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time - arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. - iwlwifi: mvm: fix kernel panic in case of assert during CSA - ARC: stack unwinding: don't assume non-current task is sleeping - scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE - soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - kbuild: avoid static_assert for genksyms - scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" - x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP - PCI: qcom: Add missing reset for ipq806x - net: stmmac: free tx skb buffer in stmmac_resume() - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net/mlx4_en: Avoid scheduling restart task if it is already running - net/mlx4_en: Handle TX error CQE - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux - net: bridge: vlan: fix error return code in __vlan_add() - mac80211: mesh: fix mesh_pathtbl_init() error path - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: UAS: introduce a quirk to set no_write_same - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - gpio:
[Kernel-packages] [Bug 1910639] Re: DMI entry syntax fix for Pegatron / ByteSpeed C15B
This bug was fixed in the package linux - 4.15.0-136.140 --- linux (4.15.0-136.140) bionic; urgency=medium * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time - arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. - iwlwifi: mvm: fix kernel panic in case of assert during CSA - ARC: stack unwinding: don't assume non-current task is sleeping - scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE - soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - kbuild: avoid static_assert for genksyms - scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" - x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP - PCI: qcom: Add missing reset for ipq806x - net: stmmac: free tx skb buffer in stmmac_resume() - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net/mlx4_en: Avoid scheduling restart task if it is already running - net/mlx4_en: Handle TX error CQE - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux - net: bridge: vlan: fix error return code in __vlan_add() - mac80211: mesh: fix mesh_pathtbl_init() error path - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: UAS: introduce a quirk to set no_write_same - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling - drm/tegra: sor: Disable clocks on error in tegra_sor_init() - vxlan: Add needed_headroom for lower device - vxlan: Copy needed_tailroom from lowerdev - scsi: mpt3sas: Increase IOCInit request timeout to 30s - dm
[Kernel-packages] [Bug 1911331] Re: Bionic update: upstream stable patchset 2021-01-12
This bug was fixed in the package linux - 4.15.0-136.140 --- linux (4.15.0-136.140) bionic; urgency=medium * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time - arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. - iwlwifi: mvm: fix kernel panic in case of assert during CSA - ARC: stack unwinding: don't assume non-current task is sleeping - scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE - soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - kbuild: avoid static_assert for genksyms - scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" - x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP - PCI: qcom: Add missing reset for ipq806x - net: stmmac: free tx skb buffer in stmmac_resume() - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net/mlx4_en: Avoid scheduling restart task if it is already running - net/mlx4_en: Handle TX error CQE - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux - net: bridge: vlan: fix error return code in __vlan_add() - mac80211: mesh: fix mesh_pathtbl_init() error path - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: UAS: introduce a quirk to set no_write_same - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling - drm/tegra: sor: Disable clocks on error in tegra_sor_init() - vxlan: Add needed_headroom for lower device - vxlan: Copy needed_tailroom from lowerdev - scsi: mpt3sas: Increase IOCInit request timeout to 30s - dm
[Kernel-packages] [Bug 1913200] Re: Introduce the new NVIDIA 460-server series and update the 460 series
This bug was fixed in the package linux - 4.15.0-136.140 --- linux (4.15.0-136.140) bionic; urgency=medium * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time - arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. - iwlwifi: mvm: fix kernel panic in case of assert during CSA - ARC: stack unwinding: don't assume non-current task is sleeping - scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE - soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - kbuild: avoid static_assert for genksyms - scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" - x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP - PCI: qcom: Add missing reset for ipq806x - net: stmmac: free tx skb buffer in stmmac_resume() - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net/mlx4_en: Avoid scheduling restart task if it is already running - net/mlx4_en: Handle TX error CQE - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux - net: bridge: vlan: fix error return code in __vlan_add() - mac80211: mesh: fix mesh_pathtbl_init() error path - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: UAS: introduce a quirk to set no_write_same - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - can: softing: softing_netdev_open(): fix error handling - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait - kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling - drm/tegra: sor: Disable clocks on error in tegra_sor_init() - vxlan: Add needed_headroom for lower device - vxlan: Copy needed_tailroom from lowerdev - scsi: mpt3sas: Increase IOCInit request timeout to 30s - dm
[Kernel-packages] [Bug 1913294] Re: Sync FSGSBASE patches in azure kernel with mainline
This bug was fixed in the package linux-azure-4.15 - 4.15.0-1108.120 --- linux-azure-4.15 (4.15.0-1108.120) bionic; urgency=medium * bionic/linux-azure-4.15: 4.15.0-1108.120 -proposed tracker (LP: #1915371) * Add XDP support to hv_netvsc driver (LP: #1877654) - hv_netvsc: pass netvsc_device to receive callback - xdp: base API for new XDP rx-queue info concept - ixgbe: setup xdp_rxq_info - xdp/qede: setup xdp_rxq_info and intro xdp_rxq_info_is_reg - tun: setup xdp_rxq_info - virtio_net: setup xdp_rxq_info - xdp: generic XDP handling of xdp_rxq_info - tun/tap: use ptr_ring instead of skb_array - tuntap: XDP transmission - net: avoid including xdp.h in filter.h - virtio_net: fix ndo_xdp_xmit crash towards dev not ready for XDP - tuntap: XDP_TX can use native XDP - i40e: add support for XDP_REDIRECT - xdp: introduce xdp_return_frame API and use in cpumap - ixgbe: use xdp_return_frame API - xdp: move struct xdp_buff from filter.h to xdp.h - xdp: introduce a new xdp_frame type - tun: convert to use generic xdp_frame and xdp_return_frame API - virtio_net: convert to use generic xdp_frame and xdp_return_frame API - bpf: cpumap convert to use generic xdp_frame - i40e: convert to use generic xdp_frame and xdp_return_frame API - xdp: rhashtable with allocator ID to pointer mapping - page_pool: refurbish version of page_pool code - xdp: allow page_pool as an allocator type in xdp_return_frame - xdp: transition into using xdp_frame for return API - xdp: transition into using xdp_frame for ndo_xdp_xmit - xsk: add user memory registration support sockopt - xsk: add umem fill queue support and mmap - xsk: add Rx queue setup and mmap support - xsk: add support for bind for Rx - xsk: add Rx receive functions and poll support - bpf: devmap introduce dev_map_enqueue - bpf: devmap prepare xdp frames for bulking - xdp: introduce xdp_return_frame_rx_napi - xdp: add MEM_TYPE_ZERO_COPY - hv_netvsc: Add support for LRO/RSC in the vSwitch - hv_netvsc: Refactor assignments of struct netvsc_device_info - hv_netvsc: Add XDP support - hv_netvsc: Update document for XDP support - hv_netvsc: Fix XDP refcnt for synthetic and VF NICs * Sync FSGSBASE patches in azure kernel with mainline (LP: #1913294) - x86/kvm/vmx: read MSR_{FS, KERNEL_GS}_BASE from current->thread - x86/process/64: Make save_fsgs_for_kvm() ready for FSGSBASE - x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM * Disable Atari partition support for cloud kernels (LP: #1908264) - [Config] azure: Disable ATARI_PARTITION * Enable boot from NVMe device for all images (LP: #1908571) - [Config] azure: CONFIG_PCI_HYPERV=y [ Ubuntu: 4.15.0-136.140 ] * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time -
[Kernel-packages] [Bug 1913739] Re: aws: properly support instance types with > 255 cpu cores
This bug was fixed in the package linux-aws - 4.15.0-1094.101 --- linux-aws (4.15.0-1094.101) bionic; urgency=medium * bionic/linux-aws: 4.15.0-1094.101 -proposed tracker (LP: #1913097) * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - [Config] aws: Update config for USB_SISUSBVGA_CON * Disable Bluetooth in cloud kernels (LP: #1840488) - aws: [Config] disable CONFIG_BT - aws: [Config] remove disabled BT modules * aws: properly support instance types with > 255 cpu cores (LP: #1913739) - iommu/vt-d: Gracefully handle DMAR units with no supported address widths [ Ubuntu: 4.15.0-136.140 ] * bionic/linux: 4.15.0-136.140 -proposed tracker (LP: #1913117) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: change num_queues to num_io_queues for clarity and consistency - net: ena: ethtool: get_channels: use combined only - net: ena: ethtool: support set_channels callback - net: ena: ethtool: remove redundant non-zero check on rc - net/amazon: Ensure that driver version is aligned to the linux kernel - net: ena: ethtool: clean up minor indentation issue - net: ena: remove code that does nothing - net: ena: add unmask interrupts statistics to ethtool - net: ena: cosmetic: change ena_com_stats_admin stats to u64 - net: ena: cosmetic: remove unnecessary code - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: Change license into format to SPDX in all files - net: ena: Change RSS related macros and variables names * CVE-2020-29374 - gup: document and work around "COW can break either way" issue * Bionic update: upstream stable patchset 2021-01-12 (LP: #1911331) - spi: bcm2835aux: Fix use-after-free on unbind - spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe - iwlwifi: pcie: limit memory read spin time - arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. - iwlwifi: mvm: fix kernel panic in case of assert during CSA - ARC: stack unwinding: don't assume non-current task is sleeping - scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE - soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) - platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE - Input: cm109 - do not stomp on control URB - Input: i8042 - add Acer laptops to the i8042 reset list - kbuild: avoid static_assert for genksyms - scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()" - x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP - PCI: qcom: Add missing reset for ipq806x - net: stmmac: free tx skb buffer in stmmac_resume() - tcp: fix cwnd-limited bug for TSO deferral where we send nothing - net/mlx4_en: Avoid scheduling restart task if it is already running - net/mlx4_en: Handle TX error CQE - net: stmmac: delete the eee_ctrl_timer after napi disabled - net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux - net: bridge: vlan: fix error return code in __vlan_add() - mac80211: mesh: fix mesh_pathtbl_init() error path - USB: dummy-hcd: Fix uninitialized array use in init() - USB: add RESET_RESUME quirk for Snapscan 1212 - ALSA: usb-audio: Fix potential out-of-bounds shift - ALSA: usb-audio: Fix control 'access overflow' errors from chmap - xhci: Give USB2 ports time to enter U3 in bus suspend - USB: UAS: introduce a quirk to set no_write_same - USB: sisusbvga: Make console support depend on BROKEN - [Config] updateconfigs for USB_SISUSBVGA_CON - ALSA: pcm: oss: Fix potential out-of-bounds shift - serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access - drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - gpio:
[Kernel-packages] [Bug 1914279] Re: linux from security may force reboots without complete dkms modules
@kernel team please check which dkms packages in -updates fix FTBFS, and if they need to be rebuilt in -security pocket and released in -security pocket. ** Changed in: linux-meta (Ubuntu) Status: New => Triaged ** Changed in: linux (Ubuntu) Status: Confirmed => Triaged -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to dkms in Ubuntu. https://bugs.launchpad.net/bugs/1914279 Title: linux from security may force reboots without complete dkms modules Status in apt package in Ubuntu: Invalid Status in dkms package in Ubuntu: New Status in linux package in Ubuntu: Triaged Status in linux-meta package in Ubuntu: Triaged Status in unattended-upgrades package in Ubuntu: Invalid Status in update-manager package in Ubuntu: Invalid Bug description: Whilst discussing https://discourse.ubuntu.com/t/improvements-for-hardware-support-in- ubuntu-desktop-installation-media/20606 We have noticed a reference to somebody not having working backport- iwlwifi-dkms, whilst SRU of that happened before the v5.4 -> v5.8 switch. However, kernel meta switch was pushed to security pocket, but the dkms modules are all in -updates only. This may result in people automatically installing the new kernel with unatanded upgrades; dkms modules failing to build; and a reboot required flag left on disk. At this point launching update manager will not offer to install dkms modules from updates, and will guide the users to reboot. which will then cause them to boot the new kernel without the dkms modules that might be providing networking for them. Should dkms modules SRUs always getting published into -security pocket, as well as the -updates pocket? Should linux maintainer scripts prevent touching reboot required flag if any dkms modules fail to build? Should apt / unattanded-upgrades / update-manager always update dkms modules with kernels? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1914279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1907265] Re: [UBUNTU 21.04] s390/pci: vfio-pci mmio being disabled erroneously
** Changed in: ubuntu-z-systems Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1907265 Title: [UBUNTU 21.04] s390/pci: vfio-pci mmio being disabled erroneously Status in Ubuntu on IBM z Systems: Fix Released Status in linux package in Ubuntu: Fix Released Status in linux source package in Focal: Fix Released Status in linux source package in Groovy: Fix Released Status in linux source package in Hirsute: Fix Released Bug description: Description: s390/pci: vfio-pci mmio being disabled erroneously Symptom: PCI virtual functions passed through via vfio-pci are unusable Problem: The fix for CVE-2020-12888 'abafbc551fdd vfio-pci: Invalidate mmaps and block MMIO access on disabled memory' introduced an issue which prevented PCI Virtual Functions from being passed- through via vfio-pci as VFs are not allowed to have the PCI_COMMAND_MEMORY bit enabled per spec. This issue was initially thought to be fixed via 'ebfa440ce38b vfio/pci: Fix SR-IOV VF handling with MMIO blocking' which removes the PCI_COMMAND_MEMORY requirement for VFs but this did not solve the issue for virtual functions on s390 that are first passed through to an LPAR without their associated physical function as they are not identified as VFs in the traditional sense (there is no PF available to the host kernel to link to). As a result, when passing these devices through to a guest via vfio-pci, these devices do not trigger the check added by ebfa440ce38b which results in MMIO access from the guest being blocked because the PCI_COMMAND_MEMORY bit is off. Solution: Identify devices beyond traditional linked VFs that vfio must consider memory-enabled. Reproduction: Pass a PCI Virtual Function to a qemu-kvm guest via vfio-pci Upstream-ID: 12856e7acde4702b7c3238c15fcba86ff6aa507f 08b6e22b850c28b6032da1e4d767a33116e23dfb 515ecd5368f1510152fa4f9b9ce55b66ac56c334 These patches need to be applied for 20.10 and 20.04. The git-commits will apply cleanly on the dedicated kernels. Manx thx To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/1907265/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1903682] Re: NULL pointer dereference when configuring multi-function with devfn != 0 before devfn == 0
** Changed in: ubuntu-z-systems Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1903682 Title: NULL pointer dereference when configuring multi-function with devfn != 0 before devfn == 0 Status in Ubuntu on IBM z Systems: Fix Released Status in linux package in Ubuntu: Fix Released Status in linux source package in Focal: Fix Released Status in linux source package in Groovy: Fix Released Status in linux source package in Hirsute: Fix Released Bug description: SRU Justification: == [Impact] * While handling multifunction devices in zPCI the UID of the PCI function with function number 0 (that always exists according to the PCI spec) is taken as domain number. * Therefore if hot plugging functions with a function number larger than 0 are used before function 0, these need to be held in standby before creating the domain and bus. * This has been tested during development of this feature using a patched QEMU and in DPM, but unfortunately never in classic/traditional HMC mode. * On a classic/traditional mode machine with a multi-function device, and hot plug ("Reassign I/O Path") of the FID of the second port of the LPAR, any additional hotplug (and even just deconfiguring a PCI device) will hang - and hotplug now makes the entire Linux instance unresponsive. * The reason for this is a NULL pointer dereference - inc case configuring multi-function with devfn != 0 before devfn == 0. * This issue was introduced with the topology-aware PCI enumeration code. [Fix] * 0b2ca2c7d0c9e2731d01b6c862375d44a7e13923 0b2ca2c7d0c9 "s390/pci: fix hot-plug of PCI function missing bus" [Test Case] * IBM Z or LinuxONE hardware, equipped with hot-pluggable, multi- functional PCIe cards (like for example RoCE Express 2 adapters) in classic/traditional mode. * An Ubuntu OS running in LPAR, that comes with a kernel that includes the topology-aware PCI enumeration code (like for example 20.04.1 w/o further updates or 20.10 GA kernel). * Now on a system that is in classic/traditional mode, hot plug ("Reassign I/O Path") a multi-function device, but using the FID of the second port. [Regression Potential] * There is at least some regression risk, but I consider it as low, because: * Even is the modification is a single if statement (that spans two lines) in 'zpci_event_availability' it could harm the zPCI event management even more, in worst case it could break hot plug not only for systems in classic/traditional mode, but also in DPM mode (and making the system hang) or for all ports. * In such a case no enabling / disabling of devices would be possible. * But the fix is very simple and straight-forward, it checks zdev->zbus->bus for being NULL and in such a case break the function - means breaking instead of calling the PCI common code pci_scan_single_device() with the NULL pointer. * PCIe devices are usually more optional devices on s390x (compared to CCW and OSA devices for network) and this affects the zPCI subsystem only, which is unique to s390x. [Other] * The patch got upstream accepted with kernel v5.10-rc3, hence it will land sooner or later in Hirsute. * It was initially planned to address groovy via 5.8 upstream stable update, and in fact the patch was already marked for this, but it didn't made it because 5.8 reached it's EOL already. * Hence in addition to the already submitted SRU for focal, this is now a separate SRU for groovy. __ Background: When handling multifunction devices in zPCI we take the UID of the PCI function with function number 0 (that always exists according to the PCI spec) as domain number. Therefore when hot plugging functions with function number larger than 0 before function 0, we need to hold these in standby before creating the domain and bus. This has been tested during feature development using a patched QEMU and with DPM but never in Classic Mode. Reproduction: This issue was introduced with the Topology aware PCI Enumeration code so test with a Linux supporting that feature. E.g. Upstream, Devel Driver etc. On a Classic Mode machine with a multi-function device, hot plug ("Reassign I/O Path") only the FID of the second port to the LPAR. Symptom: After this any additional hotplug and even just deconfiguring a PCI device will hang. A hotplug makes the entire Linux instance unresponsive. Analysis: The problem occurs in Classic Mode but not with previous testing as the LPAR hypervisor does hot plug/Reassign I/O Path as a two step process: 1. zPCI event with PEC 0x0302 to plug the zPCI function in Standby 2. zPCI event with PEC 0x0301 to configure the zPCI function For the first event we create the
[Kernel-packages] [Bug 1895132] Re: s390x broken with unknown syscall number on kernels < 5.8
** Changed in: ubuntu-z-systems Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1895132 Title: s390x broken with unknown syscall number on kernels < 5.8 Status in Ubuntu on IBM z Systems: Fix Released Status in linux package in Ubuntu: Invalid Status in linux source package in Focal: Fix Released Bug description: SRU Justification Impact: On kernels prior to 5.8 when a task is in traced state (due to audit, ptrace, or seccomp) s390x and a syscall is issued that the kernel doesn't know about s390x will not return ENOSYS in r2 but instead will return the syscall number. This breaks userspace all over the place. The following program compiled on s390x will output 500 instead of -ENOSYS: root@test:~# cat test.c #define _GNU_SOURCE #include #include #include #include #include #include #include #include #include #include #include #include #include static inline int dummy_inline_asm(void) { register long r1 asm("r1") = 500; register long r2 asm("r2") = -1; register long r3 asm("r3") = -1; register long r4 asm("r4") = -1; register long r5 asm("r5") = -1; register long __res_r2 asm("r2"); asm volatile( "svc 0\n\t" : "=d"(__res_r2) : "d"(r1), "0"(r2), "d"(r3), "d"(r4), "d"(r5) : "memory"); return (int) __res_r2; } static inline int dummy_syscall(void) { return syscall(500, -1, -1, -1, -1); } int main(int argc, char *argv[]) { printf("Uhm: %d\n", dummy_inline_asm()); printf("Uhm: %d\n", dummy_syscall()); exit(EXIT_SUCCESS); } This breaks LXD on s390x currently completely as well as strace. Fix: Backport commit cd29fa798001075a554b978df3a64e6656c25794 Author: Sven Schnelle Date: Fri Mar 6 13:18:31 2020 +0100 s390/ptrace: return -ENOSYS when invalid syscall is supplied The current code returns the syscall number which an invalid syscall number is supplied and tracing is enabled. This makes the strace testsuite fail. Signed-off-by: Sven Schnelle Signed-off-by: Vasily Gorbik which got released with 5.8. The commit missed to Cc stable and although I've asked Sven to include it in stable I'm not sure when or if it will show up there. Regression Potential: Limited to s390x. Test Case: The reproducer given above needs to output -ENOSYS instead of 500. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/1895132/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1906255] Re: [UBUNTU 20.10] Applications runing in QEMU/KVM get translation faults
** Changed in: ubuntu-z-systems Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1906255 Title: [UBUNTU 20.10] Applications runing in QEMU/KVM get translation faults Status in Ubuntu on IBM z Systems: Fix Released Status in linux package in Ubuntu: Fix Released Status in linux source package in Groovy: Fix Released Status in linux source package in Hirsute: Fix Released Bug description: SRU Justification: == [Impact] * The commit 0b0ed657fe "s390: remove critical section cleanup from entry.S" was introduced in kernel 5.8, but instigated a problem where FPU registers were not properly restored when entering the SIE (start interpretive execution) instruction. * This leads to crashes of applications runnning inside KVM, as most of the programs in use nowdays are using FPU registers for backing of general register content. * To fix this interrupts in load_fpu_regs() need to be disabled - otherwise an interrupt might come in after the registers are loaded, but before CIF_FPU is cleared in load_fpu_regs(). * When the interrupt returns, CIF_FPU will be cleared and the registers will never be restored. [Fix] * 1179f170b6f0af7bb0b3b7628136eaac450ddf31 1179f170b6f0 "s390: fix fpu restore in entry.S" [Test Case] * IBM Z or LinuxONE hardware with Ubuntu Server 20.10 installed. * A KVM host needs to be setup as well as an KVM guest (use again 20.10). * Run (ideally context switching) workload that makes use of FP instructions inside of the KVM guest. * Monitor the health of the guest for crashes (logs). [Regression Potential] * Even if the code changes are quite overseeable, there is still a certain risk for regression, because: * the modifications affect a critical part of the kernel (arch/s390/kernel/entry.S) * affect the handling of the FPU registers * and are always in use if KVM guests run * So in worst case the changes may have an even bigger impact on FPU workloads in KVM guests * and may not only crash in case of FPU usage, but also KVM in general. * But the code is peurly s390x specific, hence affects IBM Z only, * and it got already upstream accepted with v5.10-rc6 * and a test kernel (based on groovy master-next) was build for further testing. [Other] * The patch got upstream accepted with kernel v5.10-rc6, hence it will land sooner or later in Hirsute. * It was initially planned to address groovy via 5.8 upstream stable update, and in fact the patch was already marked for this, but it didn't made it because 5.8 already reached it's EOL. * Hence this SRU is submitted for groovy only. __ commit 0b0ed657fe ("s390: remove critical section cleanup from entry.S") introduced a problem where FPU registers were not properly restored when entering SIE. This leads to crashes of applications runnning inside kvm, as most of the programs in use nowdays are using FPU registers for backing of general register content. Fix is upstream: authorSven Schnelle 2020-11-20 14:17:52 +0100 committer Heiko Carstens 2020-11-23 11:52:13 +0100 commit1179f170b6f0af7bb0b3b7628136eaac450ddf31 (patch) tree 19e8acb64e0968b41de4899cc1315c41b002839e /arch/s390/kernel/entry.S parent78d732e1f326f74f240d416af9484928303d9951 (diff) download linux-1179f170b6f0af7bb0b3b7628136eaac450ddf31.tar.gz s390: fix fpu restore in entry.S We need to disable interrupts in load_fpu_regs(). Otherwise an interrupt might come in after the registers are loaded, but before CIF_FPU is cleared in load_fpu_regs(). When the interrupt returns, CIF_FPU will be cleared and the registers will never be restored. The entry.S code usually saves the interrupt state in __SF_EMPTY on the stack when disabling/restoring interrupts. sie64a however saves the pointer to the sie control block in __SF_SIE_CONTROL, which references the same location. This is non-obvious to the reader. To avoid thrashing the sie control block pointer in load_fpu_regs(), move the __SIE_* offsets eight bytes after __SF_EMPTY on the stack. Cc: # 5.8 Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S") Reported-by: Pierre Morel Signed-off-by: Sven Schnelle Acked-by: Christian Borntraeger Reviewed-by: Heiko Carstens Signed-off-by: Heiko Carstens To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/1906255/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1861936] Re: Raspberry Pi 3 network dies shortly after a burst of IPv6 tunnel network load ((lan78xx): transmit queue 0 timed out)
The upstream fix "b160c28548bc tcp: do not mess with cloned skbs in tcp_add_backlog()" has been applied to focal/linux as part of the fixes for bug 1915195 (Focal update: v5.4.93 upstream stable release). It will be included for the next focal/linux-raspi, however this bug report will not be closed automatically. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-raspi2 in Ubuntu. https://bugs.launchpad.net/bugs/1861936 Title: Raspberry Pi 3 network dies shortly after a burst of IPv6 tunnel network load ((lan78xx): transmit queue 0 timed out) Status in linux-raspi package in Ubuntu: Incomplete Status in linux-raspi2 package in Ubuntu: Incomplete Status in linux-raspi2 source package in Eoan: Won't Fix Status in linux-raspi source package in Focal: Fix Committed Status in linux-raspi source package in Groovy: Fix Committed Bug description: [Impact] A mix of incoming TCP traffic, forwarding packets and saturating the link results in lan78xx TX queue timeouts which brings the network interface down. [Test Case] Se comment #99 below. [Where Problems Could Occur] Probably lost or corrupted TCP packets. Most likely not worse than what we're currently seeing. [Original Description] Desciption changed: Raspberry Pi 3 network partially dies (transmission doesn't work, reception still does) shortly after a burst of network load over IPv6, when IPv6 connectivity is provided by a tunnel from tunnelbroker.net. The triggering load is typically an HTTP(S) download, and replication can be done without actually saving the file (wget -O /dev/null ...). Problem happens within downloading ~10 GB, usually withinthe first 1 GB of traffic) Replication is 100% as long as _all_ of the following conditions are met - 6in4 tunnel to HE.net set up with netplan - ipv6 rules applied (netfilter-persistent) - ipv6 forwarding enabled (edit /etc/sysctl.conf) kern.log message that appears after a while: Feb 4 23:42:59 rpi3 kernel: [ 571.878359] [ cut here ] Feb 4 23:42:59 rpi3 kernel: [ 571.878420] NETDEV WATCHDOG: eth0 (lan78xx): transmit queue 0 timed out Feb 4 23:42:59 rpi3 kernel: [ 571.878550] WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:447 dev_watchdog+0x324/0x330 Feb 4 23:42:59 rpi3 kernel: [ 571.878557] Modules linked in: sit tunnel4 ip_tunnel bridge stp llc ip6table_filter ip6_tables xt_tcpudp xt_conntrack nf_conntrack iptable_filter bpfilter nls_ascii dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua btsdio bluetooth ecdh_generic ecc brcmfmac brcmutil cfg80211 bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) input_leds vc_sm_cma(CE) v4l2_common videobuf2_vmalloc spidev videobuf2_memops videobuf2_v4l2 raspberrypi_hwmon videobuf2_common videodev mc uio_pdrv_genirq uio sch_fq_codel jool(OE) jool_common(OE) nf_defrag_ipv6 nf_defrag_ipv4 ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid crct10dif_ce sdhci_iproc phy_generic fixed aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 Feb 4 23:42:59 rpi3 kernel: [ 571.878774] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G C OE 5.3.0-1017-raspi2 #19-Ubuntu Feb 4 23:42:59 rpi3 kernel: [ 571.878781] Hardware name: Raspberry Pi 3 Model B Plus Rev 1.3 (DT) Feb 4 23:42:59 rpi3 kernel: [ 571.878789] pstate: 6045 (nZCv daif +PAN -UAO) Feb 4 23:42:59 rpi3 kernel: [ 571.878800] pc : dev_watchdog+0x324/0x330 Feb 4 23:42:59 rpi3 kernel: [ 571.878807] lr : dev_watchdog+0x324/0x330 Feb 4 23:42:59 rpi3 kernel: [ 571.878812] sp : 1001bd60 Feb 4 23:42:59 rpi3 kernel: [ 571.878817] x29: 1001bd60 x28: 0140 Feb 4 23:42:59 rpi3 kernel: [ 571.878827] x27: x26: Feb 4 23:42:59 rpi3 kernel: [ 571.878836] x25: 8ecbefa4e000 x24: 305e0f529018 Feb 4 23:42:59 rpi3 kernel: [ 571.878845] x23: x22: 0001 Feb 4 23:42:59 rpi3 kernel: [ 571.878853] x21: 8ecbefa4e480 x20: 305e0f807000 Feb 4 23:42:59 rpi3 kernel: [ 571.878862] x19: x18: Feb 4 23:42:59 rpi3 kernel: [ 571.878871] x17: 10fd8218 x16: 305e0e30efb8 Feb 4 23:42:59 rpi3 kernel: [ 571.878879] x15: 8ecbf922a290 x14: Feb 4 23:42:59 rpi3 kernel: [ 571.87] x13: x12: 305e0f944000 Feb 4 23:42:59 rpi3 kernel: [ 571.878897] x11: 305e0f82d000 x10: Feb 4 23:42:59 rpi3 kernel: [ 571.878905] x9 : 0004 x8 : 017f Feb 4 23:42:59 rpi3 kernel: [ 571.878913] x7 : x6 : 0001 Feb 4 23:42:59 rpi3 kernel: [ 571.878921] x5 : x4 : 0008 Feb 4 23:42:59 rpi3 kernel: [
[Kernel-packages] [Bug 1916570] Re: BlueZ 5.56 release
Just a comment on the packaging: the Ubuntu packaging is a bit old: it still build-depends on debhelper (>= 9), autotools-dev and libdbus- glib-1-dev (which is deprecated and the Debian package replaced it with libdbus-1-dev (>= 1.6)), and it is at Standards-Version: 3.9.6, which is ancient by now. I suggest merging with Debian first then updating to 5.56 to benefit from the up-to-date best practices in Debian packaging. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1916570 Title: BlueZ 5.56 release Status in bluez package in Ubuntu: In Progress Bug description: BlueZ 5.56 is now available: https://mirrors.edge.kernel.org/pub/linux/bluetooth/ ver 5.56: Fix issue with setting AVDTP disconnect timer. Fix issue with AVDTP not sending GetCapabilities. Fix issue with AVDTP connecting using streaming mode. Fix issue with handling A2DP and remote SEP disappearing. Fix issue with handling session of A2DP channels. Fix issue with GATT and handling device removal. Fix issue with GATT not accepting multiple requests. Fix issue with HID report value callback registration. Add support for new advertising management command. Add support for battery D-Bus interface. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1916570/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05
Hi Coiby, Did you find anything about why it still doesn't work properly on my machine? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1887190 Title: MSFT Touchpad not working on Lenovo Legion-5 15ARH05 Status in Pop!_OS: New Status in linux package in Ubuntu: Fix Released Status in xserver-xorg-input-libinput package in Ubuntu: Confirmed Status in linux package in Arch Linux: Fix Committed Status in linux package in Fedora: Confirmed Status in linux package in openSUSE: New Bug description: Update (based on #296) = The latest kernel tree (https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git) has the complete solution to fix this bug. So we can expect kernel v5.11 to fix this issue without any additional work. Before the release of v5.11, you are suggested to use #189 to save your touchpad. Note that for distributions like Ubuntu and Fedora, the pinctrl-amd driver is built into the initramfs. So you have to rebuild the initramfs after replacing the old module with new one. On Fedora, run `sudo dracut --force`; On ubuntu, run `sudo update-initramfs -u`. The complete solution is three patches, - 47a0001436352c9853d72bf2071e85b316d688a2 ("pinctrl: amd: remove debounce filter setting in IRQ type setting") - 06abe8291bc31839950f7d0362d9979edc88a666 ("pinctrl: amd: fix incorrect way to disable debounce filter") - 8dcb7a15a585b6d0fee15751ce11d7a68cfedd56 ("gpiolib: acpi: Take into account debounce settings") The first two patches has reached the stable tree. If the last one is also backported to LTS kernel, you won't need to install kernel 5.11. But I don't know when this will happen. Original bug report === Hello The MSFT touchpad of this Lenovo Legion-5 15ARH05 laptop is not reacting at all (pointer and click never move when touchpad is touched). This has been reported by other users in various websites, with various linux systems including other Ubuntu systems, but I saw no launchpad bug so I post one. Example of websites covering the issue : - https://askubuntu.com/questions/1253830/lenovo-legion-5-touchpad (exactly the same laptop) - https://www.linux.org/threads/lenovo-legion-5-touchpad.29536/ (similar laptop) xinput indentifies it as MSFT0001:00 04F3:3140 Virtual core pointer id=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ MSFT0001:00 04F3:3140 Touchpad id=17 [slave pointer (2)] ⎜ ↳ MSFT0001:00 04F3:3140 Mouse id=16 [slave pointer (2)] ⎜ ↳ ITE Tech. Inc. ITE Device(8910) Consumer Controlid=12 [slave pointer (2)] ⎜ ↳ Logitech USB Optical Mouse id=11 [slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Ideapad extra buttons id=15 [slave keyboard (3)] ↳ Power Buttonid=6[slave keyboard (3)] ↳ Integrated Camera: Integrated C id=10 [slave keyboard (3)] ↳ Video Bus id=7[slave keyboard (3)] ↳ ITE Tech. Inc. ITE Device(8910) Consumer Controlid=19 [slave keyboard (3)] ↳ Power Buttonid=9[slave keyboard (3)] ↳ ITE Tech. Inc. ITE Device(8910) Wireless Radio Control id=13 [slave keyboard (3)] ↳ ITE Tech. Inc. ITE Device(8910) Keyboardid=14 [slave keyboard (3)] ↳ AT Translated Set 2 keyboardid=18 [slave keyboard (3)] ↳ Video Bus id=8[slave keyboard (3)] Thanks a lot for your time. It does not help, but I can confirm what was reported on askubuntu by another user : the touchpad does work on Windows. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-40-generic 5.4.0-40.44 ProcVersionSignature: Ubuntu 5.4.0-40.44-generic 5.4.44 Uname: Linux 5.4.0-40-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: nicolas1567 F pulseaudio /dev/snd/controlC1: nicolas1567 F pulseaudio /dev/snd/controlC2: nicolas1567 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Fri Jul 10 20:14:25 2020 InstallationDate: Installed on 2020-07-02 (8 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: LENOVO 82B5 ProcEnviron: TERM=xterm-256color
[Kernel-packages] [Bug 1840488] Re: Disable Bluetooth in cloud kernels
This bug was fixed in the package linux-aws - 5.4.0-1038.40 --- linux-aws (5.4.0-1038.40) focal; urgency=medium * focal/linux-aws: 5.4.0-1038.40 -proposed tracker (LP: #1913135) * Focal update: v5.4.85 upstream stable release (LP: #1910817) - [Config] aws: updateconfigs for USB_SISUSBVGA_CON * Focal update: v5.4.84 upstream stable release (LP: #1910816) - [Config] aws: updateconfigs for PGTABLE_MAPPING * Focal update: v5.4.80 upstream stable release (LP: #1908561) - [Config] aws: updateconfigs for INFINIBAND_VIRT_DMA * Disable Bluetooth in cloud kernels (LP: #1840488) - aws: [Config] disable CONFIG_BT - aws: [Config] remove disabled BT modules * aws: properly support instance types with > 255 cpu cores (LP: #1913739) - iommu/vt-d: Gracefully handle DMAR units with no supported address widths [ Ubuntu: 5.4.0-66.74 ] * focal/linux: 5.4.0-66.74 -proposed tracker (LP: #1913152) * Add support for selective build of special drivers (LP: #1912789) - [Packaging] Add support for ODM drivers - [Packaging] Turn on ODM support for amd64 * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * kvm: Windows 2k19 with Hyper-v role gets stuck on pending hypervisor requests on cascadelake based kvm hosts (LP: #1911848) - KVM: x86: Set KVM_REQ_EVENT if run is canceled with req_immediate_exit set * Ubuntu 20.10 four needed fixes to 'Add driver for Mellanox Connect-IB adapters' (LP: #1905574) - net/mlx5: Fix a race when moving command interface to polling mode * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: Change WARN_ON expression in ena_del_napi_in_range() - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Capitalize all log strings and improve code readability - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: handle bad request id in ena_netdev - net: ena: fix packet's addresses for rx_offset feature * s390x broken with unknown syscall number on kernels < 5.8 (LP: #1895132) - s390/ptrace: return -ENOSYS when invalid syscall is supplied * Focal update: v5.4.86 upstream stable release (LP: #1910822) - ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY - ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator - ARM:
[Kernel-packages] [Bug 1906255] Re: [UBUNTU 20.10] Applications runing in QEMU/KVM get translation faults
This bug was fixed in the package linux - 5.8.0-44.50 --- linux (5.8.0-44.50) groovy; urgency=medium * groovy/linux: 5.8.0-44.50 -proposed tracker (LP: #1914805) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * [SRU][G/H/U/OEM-5.10] re-enable s0ix of e1000e (LP: #1910541) - Revert "UBUNTU: SAUCE: e1000e: bump up timeout to wait when ME un-configure ULP mode" - e1000e: Only run S0ix flows if shutdown succeeded - Revert "e1000e: disable s0ix entry and exit flows for ME systems" - e1000e: Export S0ix flags to ethtool * suspend only works once on ThinkPad X1 Carbon gen 7 (LP: #1865570) // [SRU][G/H/U/OEM-5.10] re-enable s0ix of e1000e (LP: #1910541) - e1000e: bump up timeout to wait when ME un-configures ULP mode * Cannot probe sata disk on sata controller behind VMD: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) (LP: #1894778) - PCI: vmd: Offset Client VMD MSI-X vectors * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * [UBUNTU 21.04] vfio: pass DMA availability information to userspace (LP: #1907421) - vfio/type1: Refactor vfio_iommu_type1_ioctl() - vfio iommu: Add dma available capability * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: Capitalize all log strings and improve code readability * Groovy update: upstream stable patchset 2021-01-15 (LP: #1912027) - net: ipconfig: Avoid spurious blank lines in boot log - x86/split-lock: Avoid returning with interrupts enabled - exfat: Avoid allocating upcase table using kcalloc() - soc/tegra: fuse: Fix index bug in get_process_id - usb: mtu3: fix memory corruption in mtu3_debugfs_regset() - USB: serial: option: add interface-number sanity check to flag handling - USB: gadget: f_acm: add support for SuperSpeed Plus - USB: gadget: f_midi: setup SuperSpeed Plus descriptors - usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus - USB: gadget: f_rndis: fix bitrate for SuperSpeed and above - usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul - ARM: dts: exynos: fix roles of USB 3.0 ports on Odroid XU - ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410 - ARM: dts: exynos: fix USB 3.0 pins supply being turned off on
[Kernel-packages] [Bug 1907151] Re: Focal update: v5.4.79 upstream stable release
This bug was fixed in the package linux - 5.4.0-66.74 --- linux (5.4.0-66.74) focal; urgency=medium * focal/linux: 5.4.0-66.74 -proposed tracker (LP: #1913152) * Add support for selective build of special drivers (LP: #1912789) - [Packaging] Add support for ODM drivers - [Packaging] Turn on ODM support for amd64 * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * kvm: Windows 2k19 with Hyper-v role gets stuck on pending hypervisor requests on cascadelake based kvm hosts (LP: #1911848) - KVM: x86: Set KVM_REQ_EVENT if run is canceled with req_immediate_exit set * Ubuntu 20.10 four needed fixes to 'Add driver for Mellanox Connect-IB adapters' (LP: #1905574) - net/mlx5: Fix a race when moving command interface to polling mode * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: Change WARN_ON expression in ena_del_napi_in_range() - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Capitalize all log strings and improve code readability - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: handle bad request id in ena_netdev - net: ena: fix packet's addresses for rx_offset feature * s390x broken with unknown syscall number on kernels < 5.8 (LP: #1895132) - s390/ptrace: return -ENOSYS when invalid syscall is supplied * Focal update: v5.4.86 upstream stable release (LP: #1910822) - ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY - ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator - ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY - ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp - ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin - PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter - gpio: zynq: fix reference leak in zynq_gpio functions - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - xsk: Fix xsk_poll()'s return type - xsk: Replace
[Kernel-packages] [Bug 1907200] Re: rtwpci driver blocks the system to enter PC10, stuck at PC3
This bug was fixed in the package linux - 5.8.0-44.50 --- linux (5.8.0-44.50) groovy; urgency=medium * groovy/linux: 5.8.0-44.50 -proposed tracker (LP: #1914805) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * [SRU][G/H/U/OEM-5.10] re-enable s0ix of e1000e (LP: #1910541) - Revert "UBUNTU: SAUCE: e1000e: bump up timeout to wait when ME un-configure ULP mode" - e1000e: Only run S0ix flows if shutdown succeeded - Revert "e1000e: disable s0ix entry and exit flows for ME systems" - e1000e: Export S0ix flags to ethtool * suspend only works once on ThinkPad X1 Carbon gen 7 (LP: #1865570) // [SRU][G/H/U/OEM-5.10] re-enable s0ix of e1000e (LP: #1910541) - e1000e: bump up timeout to wait when ME un-configures ULP mode * Cannot probe sata disk on sata controller behind VMD: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) (LP: #1894778) - PCI: vmd: Offset Client VMD MSI-X vectors * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * [UBUNTU 21.04] vfio: pass DMA availability information to userspace (LP: #1907421) - vfio/type1: Refactor vfio_iommu_type1_ioctl() - vfio iommu: Add dma available capability * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: Capitalize all log strings and improve code readability * Groovy update: upstream stable patchset 2021-01-15 (LP: #1912027) - net: ipconfig: Avoid spurious blank lines in boot log - x86/split-lock: Avoid returning with interrupts enabled - exfat: Avoid allocating upcase table using kcalloc() - soc/tegra: fuse: Fix index bug in get_process_id - usb: mtu3: fix memory corruption in mtu3_debugfs_regset() - USB: serial: option: add interface-number sanity check to flag handling - USB: gadget: f_acm: add support for SuperSpeed Plus - USB: gadget: f_midi: setup SuperSpeed Plus descriptors - usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus - USB: gadget: f_rndis: fix bitrate for SuperSpeed and above - usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul - ARM: dts: exynos: fix roles of USB 3.0 ports on Odroid XU - ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410 - ARM: dts: exynos: fix USB 3.0 pins supply being turned off on
[Kernel-packages] [Bug 1901842] Re: Ubuntu 20.04 - multicast counter is not increased in ip -s
This bug was fixed in the package linux - 5.8.0-44.50 --- linux (5.8.0-44.50) groovy; urgency=medium * groovy/linux: 5.8.0-44.50 -proposed tracker (LP: #1914805) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * [SRU][G/H/U/OEM-5.10] re-enable s0ix of e1000e (LP: #1910541) - Revert "UBUNTU: SAUCE: e1000e: bump up timeout to wait when ME un-configure ULP mode" - e1000e: Only run S0ix flows if shutdown succeeded - Revert "e1000e: disable s0ix entry and exit flows for ME systems" - e1000e: Export S0ix flags to ethtool * suspend only works once on ThinkPad X1 Carbon gen 7 (LP: #1865570) // [SRU][G/H/U/OEM-5.10] re-enable s0ix of e1000e (LP: #1910541) - e1000e: bump up timeout to wait when ME un-configures ULP mode * Cannot probe sata disk on sata controller behind VMD: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) (LP: #1894778) - PCI: vmd: Offset Client VMD MSI-X vectors * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * [UBUNTU 21.04] vfio: pass DMA availability information to userspace (LP: #1907421) - vfio/type1: Refactor vfio_iommu_type1_ioctl() - vfio iommu: Add dma available capability * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: Capitalize all log strings and improve code readability * Groovy update: upstream stable patchset 2021-01-15 (LP: #1912027) - net: ipconfig: Avoid spurious blank lines in boot log - x86/split-lock: Avoid returning with interrupts enabled - exfat: Avoid allocating upcase table using kcalloc() - soc/tegra: fuse: Fix index bug in get_process_id - usb: mtu3: fix memory corruption in mtu3_debugfs_regset() - USB: serial: option: add interface-number sanity check to flag handling - USB: gadget: f_acm: add support for SuperSpeed Plus - USB: gadget: f_midi: setup SuperSpeed Plus descriptors - usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus - USB: gadget: f_rndis: fix bitrate for SuperSpeed and above - usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul - ARM: dts: exynos: fix roles of USB 3.0 ports on Odroid XU - ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410 - ARM: dts: exynos: fix USB 3.0 pins supply being turned off on
[Kernel-packages] [Bug 1895132] Re: s390x broken with unknown syscall number on kernels < 5.8
This bug was fixed in the package linux - 5.4.0-66.74 --- linux (5.4.0-66.74) focal; urgency=medium * focal/linux: 5.4.0-66.74 -proposed tracker (LP: #1913152) * Add support for selective build of special drivers (LP: #1912789) - [Packaging] Add support for ODM drivers - [Packaging] Turn on ODM support for amd64 * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * kvm: Windows 2k19 with Hyper-v role gets stuck on pending hypervisor requests on cascadelake based kvm hosts (LP: #1911848) - KVM: x86: Set KVM_REQ_EVENT if run is canceled with req_immediate_exit set * Ubuntu 20.10 four needed fixes to 'Add driver for Mellanox Connect-IB adapters' (LP: #1905574) - net/mlx5: Fix a race when moving command interface to polling mode * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: Change WARN_ON expression in ena_del_napi_in_range() - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Capitalize all log strings and improve code readability - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: handle bad request id in ena_netdev - net: ena: fix packet's addresses for rx_offset feature * s390x broken with unknown syscall number on kernels < 5.8 (LP: #1895132) - s390/ptrace: return -ENOSYS when invalid syscall is supplied * Focal update: v5.4.86 upstream stable release (LP: #1910822) - ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY - ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator - ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY - ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp - ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin - PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter - gpio: zynq: fix reference leak in zynq_gpio functions - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - xsk: Fix xsk_poll()'s return type - xsk: Replace
[Kernel-packages] [Bug 1893024] Re: failing ftrace self tests from 5.7+ onwards
This bug was fixed in the package linux - 5.4.0-66.74 --- linux (5.4.0-66.74) focal; urgency=medium * focal/linux: 5.4.0-66.74 -proposed tracker (LP: #1913152) * Add support for selective build of special drivers (LP: #1912789) - [Packaging] Add support for ODM drivers - [Packaging] Turn on ODM support for amd64 * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * kvm: Windows 2k19 with Hyper-v role gets stuck on pending hypervisor requests on cascadelake based kvm hosts (LP: #1911848) - KVM: x86: Set KVM_REQ_EVENT if run is canceled with req_immediate_exit set * Ubuntu 20.10 four needed fixes to 'Add driver for Mellanox Connect-IB adapters' (LP: #1905574) - net/mlx5: Fix a race when moving command interface to polling mode * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: Change WARN_ON expression in ena_del_napi_in_range() - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Capitalize all log strings and improve code readability - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: handle bad request id in ena_netdev - net: ena: fix packet's addresses for rx_offset feature * s390x broken with unknown syscall number on kernels < 5.8 (LP: #1895132) - s390/ptrace: return -ENOSYS when invalid syscall is supplied * Focal update: v5.4.86 upstream stable release (LP: #1910822) - ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY - ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator - ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY - ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp - ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin - PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter - gpio: zynq: fix reference leak in zynq_gpio functions - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - xsk: Fix xsk_poll()'s return type - xsk: Replace
[Kernel-packages] [Bug 1882503] Re: eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9
This bug was fixed in the package linux - 5.4.0-66.74 --- linux (5.4.0-66.74) focal; urgency=medium * focal/linux: 5.4.0-66.74 -proposed tracker (LP: #1913152) * Add support for selective build of special drivers (LP: #1912789) - [Packaging] Add support for ODM drivers - [Packaging] Turn on ODM support for amd64 * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * kvm: Windows 2k19 with Hyper-v role gets stuck on pending hypervisor requests on cascadelake based kvm hosts (LP: #1911848) - KVM: x86: Set KVM_REQ_EVENT if run is canceled with req_immediate_exit set * Ubuntu 20.10 four needed fixes to 'Add driver for Mellanox Connect-IB adapters' (LP: #1905574) - net/mlx5: Fix a race when moving command interface to polling mode * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: Change WARN_ON expression in ena_del_napi_in_range() - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Capitalize all log strings and improve code readability - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: handle bad request id in ena_netdev - net: ena: fix packet's addresses for rx_offset feature * s390x broken with unknown syscall number on kernels < 5.8 (LP: #1895132) - s390/ptrace: return -ENOSYS when invalid syscall is supplied * Focal update: v5.4.86 upstream stable release (LP: #1910822) - ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY - ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator - ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY - ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp - ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin - PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter - gpio: zynq: fix reference leak in zynq_gpio functions - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - xsk: Fix xsk_poll()'s return type - xsk: Replace
[Kernel-packages] [Bug 1906229] Re: Refresh ACPI wakeup power to make Thunderbolt hotplug detection work
This bug was fixed in the package linux - 5.8.0-44.50 --- linux (5.8.0-44.50) groovy; urgency=medium * groovy/linux: 5.8.0-44.50 -proposed tracker (LP: #1914805) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * [SRU][G/H/U/OEM-5.10] re-enable s0ix of e1000e (LP: #1910541) - Revert "UBUNTU: SAUCE: e1000e: bump up timeout to wait when ME un-configure ULP mode" - e1000e: Only run S0ix flows if shutdown succeeded - Revert "e1000e: disable s0ix entry and exit flows for ME systems" - e1000e: Export S0ix flags to ethtool * suspend only works once on ThinkPad X1 Carbon gen 7 (LP: #1865570) // [SRU][G/H/U/OEM-5.10] re-enable s0ix of e1000e (LP: #1910541) - e1000e: bump up timeout to wait when ME un-configures ULP mode * Cannot probe sata disk on sata controller behind VMD: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) (LP: #1894778) - PCI: vmd: Offset Client VMD MSI-X vectors * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * [UBUNTU 21.04] vfio: pass DMA availability information to userspace (LP: #1907421) - vfio/type1: Refactor vfio_iommu_type1_ioctl() - vfio iommu: Add dma available capability * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: Capitalize all log strings and improve code readability * Groovy update: upstream stable patchset 2021-01-15 (LP: #1912027) - net: ipconfig: Avoid spurious blank lines in boot log - x86/split-lock: Avoid returning with interrupts enabled - exfat: Avoid allocating upcase table using kcalloc() - soc/tegra: fuse: Fix index bug in get_process_id - usb: mtu3: fix memory corruption in mtu3_debugfs_regset() - USB: serial: option: add interface-number sanity check to flag handling - USB: gadget: f_acm: add support for SuperSpeed Plus - USB: gadget: f_midi: setup SuperSpeed Plus descriptors - usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus - USB: gadget: f_rndis: fix bitrate for SuperSpeed and above - usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul - ARM: dts: exynos: fix roles of USB 3.0 ports on Odroid XU - ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410 - ARM: dts: exynos: fix USB 3.0 pins supply being turned off on
[Kernel-packages] [Bug 1906229] Re: Refresh ACPI wakeup power to make Thunderbolt hotplug detection work
This bug was fixed in the package linux - 5.4.0-66.74 --- linux (5.4.0-66.74) focal; urgency=medium * focal/linux: 5.4.0-66.74 -proposed tracker (LP: #1913152) * Add support for selective build of special drivers (LP: #1912789) - [Packaging] Add support for ODM drivers - [Packaging] Turn on ODM support for amd64 * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * kvm: Windows 2k19 with Hyper-v role gets stuck on pending hypervisor requests on cascadelake based kvm hosts (LP: #1911848) - KVM: x86: Set KVM_REQ_EVENT if run is canceled with req_immediate_exit set * Ubuntu 20.10 four needed fixes to 'Add driver for Mellanox Connect-IB adapters' (LP: #1905574) - net/mlx5: Fix a race when moving command interface to polling mode * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: Change WARN_ON expression in ena_del_napi_in_range() - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Capitalize all log strings and improve code readability - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: handle bad request id in ena_netdev - net: ena: fix packet's addresses for rx_offset feature * s390x broken with unknown syscall number on kernels < 5.8 (LP: #1895132) - s390/ptrace: return -ENOSYS when invalid syscall is supplied * Focal update: v5.4.86 upstream stable release (LP: #1910822) - ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY - ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator - ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY - ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp - ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin - PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter - gpio: zynq: fix reference leak in zynq_gpio functions - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - xsk: Fix xsk_poll()'s return type - xsk: Replace
[Kernel-packages] [Bug 1906128] Re: Touchpad not detected on ByteSpeed C15B laptop
This bug was fixed in the package linux - 5.4.0-66.74 --- linux (5.4.0-66.74) focal; urgency=medium * focal/linux: 5.4.0-66.74 -proposed tracker (LP: #1913152) * Add support for selective build of special drivers (LP: #1912789) - [Packaging] Add support for ODM drivers - [Packaging] Turn on ODM support for amd64 * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * kvm: Windows 2k19 with Hyper-v role gets stuck on pending hypervisor requests on cascadelake based kvm hosts (LP: #1911848) - KVM: x86: Set KVM_REQ_EVENT if run is canceled with req_immediate_exit set * Ubuntu 20.10 four needed fixes to 'Add driver for Mellanox Connect-IB adapters' (LP: #1905574) - net/mlx5: Fix a race when moving command interface to polling mode * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: Change WARN_ON expression in ena_del_napi_in_range() - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Capitalize all log strings and improve code readability - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: handle bad request id in ena_netdev - net: ena: fix packet's addresses for rx_offset feature * s390x broken with unknown syscall number on kernels < 5.8 (LP: #1895132) - s390/ptrace: return -ENOSYS when invalid syscall is supplied * Focal update: v5.4.86 upstream stable release (LP: #1910822) - ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY - ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator - ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY - ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp - ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin - PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter - gpio: zynq: fix reference leak in zynq_gpio functions - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - xsk: Fix xsk_poll()'s return type - xsk: Replace
[Kernel-packages] [Bug 1906851] Re: Fix reading speed and duplex sysfs on igc device
This bug was fixed in the package linux - 5.8.0-44.50 --- linux (5.8.0-44.50) groovy; urgency=medium * groovy/linux: 5.8.0-44.50 -proposed tracker (LP: #1914805) * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * [SRU][G/H/U/OEM-5.10] re-enable s0ix of e1000e (LP: #1910541) - Revert "UBUNTU: SAUCE: e1000e: bump up timeout to wait when ME un-configure ULP mode" - e1000e: Only run S0ix flows if shutdown succeeded - Revert "e1000e: disable s0ix entry and exit flows for ME systems" - e1000e: Export S0ix flags to ethtool * suspend only works once on ThinkPad X1 Carbon gen 7 (LP: #1865570) // [SRU][G/H/U/OEM-5.10] re-enable s0ix of e1000e (LP: #1910541) - e1000e: bump up timeout to wait when ME un-configures ULP mode * Cannot probe sata disk on sata controller behind VMD: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) (LP: #1894778) - PCI: vmd: Offset Client VMD MSI-X vectors * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * [UBUNTU 21.04] vfio: pass DMA availability information to userspace (LP: #1907421) - vfio/type1: Refactor vfio_iommu_type1_ioctl() - vfio iommu: Add dma available capability * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: Capitalize all log strings and improve code readability * Groovy update: upstream stable patchset 2021-01-15 (LP: #1912027) - net: ipconfig: Avoid spurious blank lines in boot log - x86/split-lock: Avoid returning with interrupts enabled - exfat: Avoid allocating upcase table using kcalloc() - soc/tegra: fuse: Fix index bug in get_process_id - usb: mtu3: fix memory corruption in mtu3_debugfs_regset() - USB: serial: option: add interface-number sanity check to flag handling - USB: gadget: f_acm: add support for SuperSpeed Plus - USB: gadget: f_midi: setup SuperSpeed Plus descriptors - usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus - USB: gadget: f_rndis: fix bitrate for SuperSpeed and above - usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul - ARM: dts: exynos: fix roles of USB 3.0 ports on Odroid XU - ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410 - ARM: dts: exynos: fix USB 3.0 pins supply being turned off on
[Kernel-packages] [Bug 1907200] Re: rtwpci driver blocks the system to enter PC10, stuck at PC3
This bug was fixed in the package linux - 5.4.0-66.74 --- linux (5.4.0-66.74) focal; urgency=medium * focal/linux: 5.4.0-66.74 -proposed tracker (LP: #1913152) * Add support for selective build of special drivers (LP: #1912789) - [Packaging] Add support for ODM drivers - [Packaging] Turn on ODM support for amd64 * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * kvm: Windows 2k19 with Hyper-v role gets stuck on pending hypervisor requests on cascadelake based kvm hosts (LP: #1911848) - KVM: x86: Set KVM_REQ_EVENT if run is canceled with req_immediate_exit set * Ubuntu 20.10 four needed fixes to 'Add driver for Mellanox Connect-IB adapters' (LP: #1905574) - net/mlx5: Fix a race when moving command interface to polling mode * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: Change WARN_ON expression in ena_del_napi_in_range() - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Capitalize all log strings and improve code readability - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: handle bad request id in ena_netdev - net: ena: fix packet's addresses for rx_offset feature * s390x broken with unknown syscall number on kernels < 5.8 (LP: #1895132) - s390/ptrace: return -ENOSYS when invalid syscall is supplied * Focal update: v5.4.86 upstream stable release (LP: #1910822) - ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY - ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator - ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY - ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp - ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin - PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter - gpio: zynq: fix reference leak in zynq_gpio functions - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - xsk: Fix xsk_poll()'s return type - xsk: Replace
[Kernel-packages] [Bug 1906851] Re: Fix reading speed and duplex sysfs on igc device
This bug was fixed in the package linux - 5.4.0-66.74 --- linux (5.4.0-66.74) focal; urgency=medium * focal/linux: 5.4.0-66.74 -proposed tracker (LP: #1913152) * Add support for selective build of special drivers (LP: #1912789) - [Packaging] Add support for ODM drivers - [Packaging] Turn on ODM support for amd64 * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * kvm: Windows 2k19 with Hyper-v role gets stuck on pending hypervisor requests on cascadelake based kvm hosts (LP: #1911848) - KVM: x86: Set KVM_REQ_EVENT if run is canceled with req_immediate_exit set * Ubuntu 20.10 four needed fixes to 'Add driver for Mellanox Connect-IB adapters' (LP: #1905574) - net/mlx5: Fix a race when moving command interface to polling mode * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: Change WARN_ON expression in ena_del_napi_in_range() - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Capitalize all log strings and improve code readability - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: handle bad request id in ena_netdev - net: ena: fix packet's addresses for rx_offset feature * s390x broken with unknown syscall number on kernels < 5.8 (LP: #1895132) - s390/ptrace: return -ENOSYS when invalid syscall is supplied * Focal update: v5.4.86 upstream stable release (LP: #1910822) - ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY - ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator - ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY - ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp - ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin - PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter - gpio: zynq: fix reference leak in zynq_gpio functions - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - xsk: Fix xsk_poll()'s return type - xsk: Replace
[Kernel-packages] [Bug 1907265] Re: [UBUNTU 21.04] s390/pci: vfio-pci mmio being disabled erroneously
This bug was fixed in the package linux - 5.4.0-66.74 --- linux (5.4.0-66.74) focal; urgency=medium * focal/linux: 5.4.0-66.74 -proposed tracker (LP: #1913152) * Add support for selective build of special drivers (LP: #1912789) - [Packaging] Add support for ODM drivers - [Packaging] Turn on ODM support for amd64 * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * kvm: Windows 2k19 with Hyper-v role gets stuck on pending hypervisor requests on cascadelake based kvm hosts (LP: #1911848) - KVM: x86: Set KVM_REQ_EVENT if run is canceled with req_immediate_exit set * Ubuntu 20.10 four needed fixes to 'Add driver for Mellanox Connect-IB adapters' (LP: #1905574) - net/mlx5: Fix a race when moving command interface to polling mode * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: Change WARN_ON expression in ena_del_napi_in_range() - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Capitalize all log strings and improve code readability - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: handle bad request id in ena_netdev - net: ena: fix packet's addresses for rx_offset feature * s390x broken with unknown syscall number on kernels < 5.8 (LP: #1895132) - s390/ptrace: return -ENOSYS when invalid syscall is supplied * Focal update: v5.4.86 upstream stable release (LP: #1910822) - ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY - ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator - ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY - ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp - ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin - PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter - gpio: zynq: fix reference leak in zynq_gpio functions - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - xsk: Fix xsk_poll()'s return type - xsk: Replace
[Kernel-packages] [Bug 1901842] Re: Ubuntu 20.04 - multicast counter is not increased in ip -s
This bug was fixed in the package linux - 5.4.0-66.74 --- linux (5.4.0-66.74) focal; urgency=medium * focal/linux: 5.4.0-66.74 -proposed tracker (LP: #1913152) * Add support for selective build of special drivers (LP: #1912789) - [Packaging] Add support for ODM drivers - [Packaging] Turn on ODM support for amd64 * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * kvm: Windows 2k19 with Hyper-v role gets stuck on pending hypervisor requests on cascadelake based kvm hosts (LP: #1911848) - KVM: x86: Set KVM_REQ_EVENT if run is canceled with req_immediate_exit set * Ubuntu 20.10 four needed fixes to 'Add driver for Mellanox Connect-IB adapters' (LP: #1905574) - net/mlx5: Fix a race when moving command interface to polling mode * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: Change WARN_ON expression in ena_del_napi_in_range() - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Capitalize all log strings and improve code readability - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: handle bad request id in ena_netdev - net: ena: fix packet's addresses for rx_offset feature * s390x broken with unknown syscall number on kernels < 5.8 (LP: #1895132) - s390/ptrace: return -ENOSYS when invalid syscall is supplied * Focal update: v5.4.86 upstream stable release (LP: #1910822) - ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY - ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator - ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY - ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp - ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin - PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter - gpio: zynq: fix reference leak in zynq_gpio functions - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - xsk: Fix xsk_poll()'s return type - xsk: Replace
[Kernel-packages] [Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05
This bug was fixed in the package linux - 5.4.0-66.74 --- linux (5.4.0-66.74) focal; urgency=medium * focal/linux: 5.4.0-66.74 -proposed tracker (LP: #1913152) * Add support for selective build of special drivers (LP: #1912789) - [Packaging] Add support for ODM drivers - [Packaging] Turn on ODM support for amd64 * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * kvm: Windows 2k19 with Hyper-v role gets stuck on pending hypervisor requests on cascadelake based kvm hosts (LP: #1911848) - KVM: x86: Set KVM_REQ_EVENT if run is canceled with req_immediate_exit set * Ubuntu 20.10 four needed fixes to 'Add driver for Mellanox Connect-IB adapters' (LP: #1905574) - net/mlx5: Fix a race when moving command interface to polling mode * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: Change WARN_ON expression in ena_del_napi_in_range() - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Capitalize all log strings and improve code readability - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: handle bad request id in ena_netdev - net: ena: fix packet's addresses for rx_offset feature * s390x broken with unknown syscall number on kernels < 5.8 (LP: #1895132) - s390/ptrace: return -ENOSYS when invalid syscall is supplied * Focal update: v5.4.86 upstream stable release (LP: #1910822) - ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY - ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator - ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY - ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp - ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin - PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter - gpio: zynq: fix reference leak in zynq_gpio functions - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - xsk: Fix xsk_poll()'s return type - xsk: Replace
[Kernel-packages] [Bug 1903596] Re: stack trace in kernel
This bug was fixed in the package linux - 5.4.0-66.74 --- linux (5.4.0-66.74) focal; urgency=medium * focal/linux: 5.4.0-66.74 -proposed tracker (LP: #1913152) * Add support for selective build of special drivers (LP: #1912789) - [Packaging] Add support for ODM drivers - [Packaging] Turn on ODM support for amd64 * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * kvm: Windows 2k19 with Hyper-v role gets stuck on pending hypervisor requests on cascadelake based kvm hosts (LP: #1911848) - KVM: x86: Set KVM_REQ_EVENT if run is canceled with req_immediate_exit set * Ubuntu 20.10 four needed fixes to 'Add driver for Mellanox Connect-IB adapters' (LP: #1905574) - net/mlx5: Fix a race when moving command interface to polling mode * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: Change WARN_ON expression in ena_del_napi_in_range() - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Capitalize all log strings and improve code readability - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: handle bad request id in ena_netdev - net: ena: fix packet's addresses for rx_offset feature * s390x broken with unknown syscall number on kernels < 5.8 (LP: #1895132) - s390/ptrace: return -ENOSYS when invalid syscall is supplied * Focal update: v5.4.86 upstream stable release (LP: #1910822) - ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY - ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator - ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY - ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp - ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin - PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter - gpio: zynq: fix reference leak in zynq_gpio functions - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - xsk: Fix xsk_poll()'s return type - xsk: Replace
[Kernel-packages] [Bug 1905663] Re: Add dpcd backlight control for 0x4c83 0x4f41
This bug was fixed in the package linux - 5.4.0-66.74 --- linux (5.4.0-66.74) focal; urgency=medium * focal/linux: 5.4.0-66.74 -proposed tracker (LP: #1913152) * Add support for selective build of special drivers (LP: #1912789) - [Packaging] Add support for ODM drivers - [Packaging] Turn on ODM support for amd64 * Packaging resync (LP: #1786013) - update dkms package versions - update dkms package versions * Introduce the new NVIDIA 460-server series and update the 460 series (LP: #1913200) - [Config] dkms-versions -- drop NVIDIA 435 455 and 440-server - [Config] dkms-versions -- add the 460-server nvidia driver * Enable mute and micmute LED on HP EliteBook 850 G7 (LP: #1910102) - ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7 * SYNA30B4:00 06CB:CE09 Mouse on HP EliteBook 850 G7 not working at all (LP: #1908992) - HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device * HD Audio Device PCI ID for the Intel Cometlake-R platform (LP: #1912427) - SAUCE: ALSA: hda: Add Cometlake-R PCI ID * switch to an autogenerated nvidia series based core via dkms-versions (LP: #1912803) - [Packaging] nvidia -- use dkms-versions to define versions built - [Packaging] update-version-dkms -- maintain flags fields - [Config] dkms-versions -- add transitional/skip information for nvidia packages * udpgro.sh in net from ubuntu_kernel_selftests seems not reflecting sub-test result (LP: #1908499) - selftests: fix the return value for UDP GRO test * qede: Kubernetes Internal DNS Failure due to QL41xxx NIC not supporting IPIP tx csum offload (LP: #1909062) - qede: fix offload for IPIP tunnel packets * Use DCPD to control HP DreamColor panel (LP: #1911001) - SAUCE: drm/dp: Another HP DreamColor panel brigntness fix * kvm: Windows 2k19 with Hyper-v role gets stuck on pending hypervisor requests on cascadelake based kvm hosts (LP: #1911848) - KVM: x86: Set KVM_REQ_EVENT if run is canceled with req_immediate_exit set * Ubuntu 20.10 four needed fixes to 'Add driver for Mellanox Connect-IB adapters' (LP: #1905574) - net/mlx5: Fix a race when moving command interface to polling mode * Fix right sounds and mute/micmute LEDs for HP ZBook Fury 15/17 G7 Mobile Workstation (LP: #1910561) - ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines * Ubuntu 20.04 - multicast counter is not increased in ip -s (LP: #1901842) - net/mlx5e: Fix multicast counter not up-to-date in "ip -s" * eeh-basic.sh in powerpc from ubuntu_kernel_selftests timeout with 5.4 P8 / P9 (LP: #1882503) - selftests/powerpc/eeh: disable kselftest timeout setting for eeh-basic * DMI entry syntax fix for Pegatron / ByteSpeed C15B (LP: #1910639) - Input: i8042 - unbreak Pegatron C15B * CVE-2020-29372 - mm: check that mm is still valid in madvise() * update ENA driver, incl. new ethtool stats (LP: #1910291) - net: ena: Change WARN_ON expression in ena_del_napi_in_range() - net: ena: ethtool: convert stat_offset to 64 bit resolution - net: ena: ethtool: Add new device statistics - net: ena: ethtool: add stats printing to XDP queues - net: ena: xdp: add queue counters for xdp actions - net: ena: Change license into format to SPDX in all files - net: ena: Change log message to netif/dev function - net: ena: Capitalize all log strings and improve code readability - net: ena: Remove redundant print of placement policy - net: ena: Change RSS related macros and variables names - net: ena: Fix all static chekers' warnings - drivers/net/ethernet: remove incorrectly formatted doc - net: ena: handle bad request id in ena_netdev - net: ena: fix packet's addresses for rx_offset feature * s390x broken with unknown syscall number on kernels < 5.8 (LP: #1895132) - s390/ptrace: return -ENOSYS when invalid syscall is supplied * Focal update: v5.4.86 upstream stable release (LP: #1910822) - ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY - ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator - ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node - pinctrl: merrifield: Set default bias in case no particular value given - pinctrl: baytrail: Avoid clearing debounce value when turning it off - ARM: dts: sun8i: v3s: fix GIC node memory range - ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY - ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp - ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin - PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter - gpio: zynq: fix reference leak in zynq_gpio functions - gpio: mvebu: fix potential user-after-free on probe - scsi: bnx2i: Requires MMU - xsk: Fix xsk_poll()'s return type - xsk: Replace