[Kernel-packages] [Bug 1978397] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1978397 Title: usb no longer works Mac mini 2012 Status in linux package in Ubuntu: Confirmed Bug description: This has been in use since 2019 but no longer works in 22.04 or 21.10, probably the usb rewrite to 40 Gb/s. 2016+ hardware works much better now, but 2012 hardware can no longer be used 2022 Dock via ORICO hub: verified to fail Jun 10 12:59:37 c32z kernel: [ 1043.251205] sd 6:0:0:0: [sdb] tag#23 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN 2022 Dock direct to usb-a port: Jun 10 13:01:51 c32z kernel: [ 1177.509589] usb 3-2: device descriptor read/64, error -110 plug in using hub Jun 10 11:45:33 c34z kernel: [ 131.031800] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 Jun 10 11:45:33 c34z kernel: [ 131.052300] sd 6:0:0:0: [sdb] Attached SCSI disk Jun 10 11:46:05 c34z kernel: [ 163.156554] sd 6:0:0:0: [sdb] tag#29 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD IN # disk failed within 32 seconds Plug in to usb-a-1 Jun 10 11:53:57 c34z kernel: [ 635.149760] usb 3-1: new high-speed USB device number 6 using xhci_hcd Jun 10 11:54:03 c34z kernel: [ 640.461860] usb 3-1: device descriptor read/64, error -110 Jun 10 11:54:18 c34z kernel: [ 656.078066] usb 3-1: device descriptor read/64, error -110 Jun 10 11:54:19 c34z kernel: [ 656.314045] usb 3-1: new high-speed USB device number 7 using xhci_hcd Jun 10 11:54:24 c34z kernel: [ 661.454133] usb 3-1: device descriptor read/64, error -110 Jun 10 11:54:39 c34z kernel: [ 677.070313] usb 3-1: device descriptor read/64, error -110 Jun 10 11:54:39 c34z kernel: [ 677.178378] usb usb3-port1: attempt power cycle Jun 10 11:54:40 c34z kernel: [ 677.830276] usb 3-1: new high-speed USB device number 8 using xhci_hcd Jun 10 11:54:50 c34z kernel: [ 688.086502] xhci_hcd :00:14.0: xHCI host controller not responding, assume dead # kills usb within 53 seconds If you write zero to the disk, syslog has fatal usb failures while dd claims everything worked fine date --rfc-3339=second && dd if=/dev/zero of=/dev/sde5 bs=1M count=128 status=progress 2022-06-11 11:52:46-07:00 128+0 records in 128+0 records out 134217728 bytes (134 MB, 128 MiB) copied, 2.74827 s, 48.8 MB/s Hardware: ls -l /sys/bus/usb/devices/usb4 lrwxrwxrwx 1 root root 0 Jun 10 11:43 /sys/bus/usb/devices/usb4 -> ../../../devices/pci:00/:00:14.0/usb4 lspci -knns14. 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) Subsystem: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:7270] Kernel driver in use: xhci_hcd Kernel modules: xhci_pci Mac mini (Late 2012) Macmini6,1 ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-5.15.0-37-generic 5.15.0-37.39 ProcVersionSignature: Ubuntu 5.15.0-37.39-generic 5.15.35 Uname: Linux 5.15.0-37-generic x86_64 NonfreeKernelModules: zfs zunicode zcommon znvpair zavl icp ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D8p', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D1c', '/dev/snd/pcmC0D1p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: pass Date: Sat Jun 11 21:57:15 2022 HibernationDevice: RESUME=none InstallationDate: Installed on 2021-07-05 (342 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) MachineType: Apple Inc. Macmini6,1 ProcEnviron: SHELL=/bin/bash LANG=en_US.UTF-8 TERM=screen PATH=(custom, no user) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/BOOT/ubuntu_uwnb63@/vmlinuz-5.15.0-37-generic root=ZFS=rpool/ROOT/ubuntu_uwnb63 ro quiet splash vt.handoff=1 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.15.0-37-generic N/A linux-backports-modules-5.15.0-37-generic N/A linux-firmware 20220329.git681281e4-0ubuntu3.2 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to jammy on 2022-06-10 (1 days ago) dmi.bios.date: 06/04/2021 dmi.bios.release: 0.1 dmi.bios.vendor: Apple Inc. dmi.bios.version: 422.0.0.0.0 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-031AEE4D24BFF0B1 dmi.board.vendor: Apple Inc.
[Kernel-packages] [Bug 1978397] [NEW] usb no longer works Mac mini 2012
Public bug reported: This has been in use since 2019 but no longer works in 22.04 or 21.10, probably the usb rewrite to 40 Gb/s. 2016+ hardware works much better now, but 2012 hardware can no longer be used 2022 Dock via ORICO hub: verified to fail Jun 10 12:59:37 c32z kernel: [ 1043.251205] sd 6:0:0:0: [sdb] tag#23 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN 2022 Dock direct to usb-a port: Jun 10 13:01:51 c32z kernel: [ 1177.509589] usb 3-2: device descriptor read/64, error -110 plug in using hub Jun 10 11:45:33 c34z kernel: [ 131.031800] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 Jun 10 11:45:33 c34z kernel: [ 131.052300] sd 6:0:0:0: [sdb] Attached SCSI disk Jun 10 11:46:05 c34z kernel: [ 163.156554] sd 6:0:0:0: [sdb] tag#29 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD IN # disk failed within 32 seconds Plug in to usb-a-1 Jun 10 11:53:57 c34z kernel: [ 635.149760] usb 3-1: new high-speed USB device number 6 using xhci_hcd Jun 10 11:54:03 c34z kernel: [ 640.461860] usb 3-1: device descriptor read/64, error -110 Jun 10 11:54:18 c34z kernel: [ 656.078066] usb 3-1: device descriptor read/64, error -110 Jun 10 11:54:19 c34z kernel: [ 656.314045] usb 3-1: new high-speed USB device number 7 using xhci_hcd Jun 10 11:54:24 c34z kernel: [ 661.454133] usb 3-1: device descriptor read/64, error -110 Jun 10 11:54:39 c34z kernel: [ 677.070313] usb 3-1: device descriptor read/64, error -110 Jun 10 11:54:39 c34z kernel: [ 677.178378] usb usb3-port1: attempt power cycle Jun 10 11:54:40 c34z kernel: [ 677.830276] usb 3-1: new high-speed USB device number 8 using xhci_hcd Jun 10 11:54:50 c34z kernel: [ 688.086502] xhci_hcd :00:14.0: xHCI host controller not responding, assume dead # kills usb within 53 seconds If you write zero to the disk, syslog has fatal usb failures while dd claims everything worked fine date --rfc-3339=second && dd if=/dev/zero of=/dev/sde5 bs=1M count=128 status=progress 2022-06-11 11:52:46-07:00 128+0 records in 128+0 records out 134217728 bytes (134 MB, 128 MiB) copied, 2.74827 s, 48.8 MB/s Hardware: ls -l /sys/bus/usb/devices/usb4 lrwxrwxrwx 1 root root 0 Jun 10 11:43 /sys/bus/usb/devices/usb4 -> ../../../devices/pci:00/:00:14.0/usb4 lspci -knns14. 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) Subsystem: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:7270] Kernel driver in use: xhci_hcd Kernel modules: xhci_pci Mac mini (Late 2012) Macmini6,1 ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-5.15.0-37-generic 5.15.0-37.39 ProcVersionSignature: Ubuntu 5.15.0-37.39-generic 5.15.35 Uname: Linux 5.15.0-37-generic x86_64 NonfreeKernelModules: zfs zunicode zcommon znvpair zavl icp ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D8p', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D1c', '/dev/snd/pcmC0D1p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: pass Date: Sat Jun 11 21:57:15 2022 HibernationDevice: RESUME=none InstallationDate: Installed on 2021-07-05 (342 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) MachineType: Apple Inc. Macmini6,1 ProcEnviron: SHELL=/bin/bash LANG=en_US.UTF-8 TERM=screen PATH=(custom, no user) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/BOOT/ubuntu_uwnb63@/vmlinuz-5.15.0-37-generic root=ZFS=rpool/ROOT/ubuntu_uwnb63 ro quiet splash vt.handoff=1 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.15.0-37-generic N/A linux-backports-modules-5.15.0-37-generic N/A linux-firmware 20220329.git681281e4-0ubuntu3.2 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to jammy on 2022-06-10 (1 days ago) dmi.bios.date: 06/04/2021 dmi.bios.release: 0.1 dmi.bios.vendor: Apple Inc. dmi.bios.version: 422.0.0.0.0 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-031AEE4D24BFF0B1 dmi.board.vendor: Apple Inc. dmi.board.version: Macmini6,1 dmi.chassis.type: 16 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-031AEE4D24BFF0B1 dmi.modalias: dmi:bvnAppleInc.:bvr422.0.0.0.0:bd06/04/2021:br0.1:svnAppleInc.:pnMacmini6,1:pvr1.0:rvnAppleInc.:rnMac-031AEE4D24BFF0B1:rvrMacmini6,1:cvnAppleInc.:ct16:cvrMac-031AEE4D24BFF0B1:skuSystemSKU#: dmi.product.family: Macmini dmi.product.name: Macmini6,1 dmi.product.sku: System SKU# dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. ** Affects: linux (Ubuntu) Importance:
[Kernel-packages] [Bug 1978396] Status changed to Confirmed
This change was made by a bot.
** Changed in: linux (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1978396
Title:
MacBook Pro 2016: 13” detected as 15”, wrong video mode
Status in linux package in Ubuntu:
Confirmed
Bug description:
On a vanilla install of Ubuntu 22.04 and 21.10, boot is in a video
mode with 2880 vertical pixels, not the real 2560x1600
Impact: at the bottom of the display are 6–12 invisible lines, and during
boot and console work, the cursor is below the bottom of the screen
— external display has same problem
Root cause: the computer is detected as MacBookPro13,3 (2016 15”
2880x1800) when it is MacBookPro13,2 (2016 13” 2560x1600)
It appears impossible to change the video mode in grub, there is only one
device and it only has one mode. edid seems to claim that the display supports
both 2560x1400 and 2880x1800 which is false
The dumb thing of course picks 2880x1800
I have noticed that linux-hardware.org probes incorrectly lists the
computer as MacBookPro13,3
— no kernel setting can fix this
— once efi or grub chose a video mode during boot, it cannot be changed
— the hidden lines is where the cursor is, error messages are displayed
after boot, one can find:
get-edid | parse-edidThis is read-edid version 3.0.2. Prepare for some fun.
Attempting to use i2c interface
No EDID on bus 0
No EDID on bus 1
No EDID on bus 2
No EDID on bus 3
No EDID on bus 5
No EDID on bus 6
1 potential busses found: 4
256-byte EDID successfully retrieved from i2c bus 4
Looks like i2c was successful. Have a good day.
Checksum Correct
Section "Monitor"
Identifier "Color LCD"
ModelName "Color LCD"
VendorName "APP"
# Monitor Manufactured week 37 of 2015
# EDID version 1.4
# Digital Display
DisplaySize 290 180
Gamma 2.20
Option "DPMS" "false"
Modeline "Mode 0" 260.73 2560 2568 2600 2640 1600 1632 1640 1646 +hsync -vsync
Modeline "Mode 1" 328.92 2880 2888 2920 2960 1800 1838 1846 1852 +hsync -vsync
EndSection
for p in /sys/class/drm/*/status; do con=${p%/status}; echo -n
"${con#*/card?-}: "; cat $p; done
DP-1: disconnected
DP-2: disconnected
eDP-1: connected
HDMI-A-1: disconnected
HDMI-A-2: disconnected
kernel command-line options tested:
video=eDP-1:2560x1600@60
# does not work
video=eDP-1:640x480
# works but number of rows still wrong
grub:
videoinfo
List of supported video modes:
Legend: mask/position=red/green/blue/reserved
Adapter ‘Bochs PCI Video Driver’:
No info available
Adapter ‘Cirrus CLGD 5446 PCI Video Driver’:
No info available
Adapter ‘EFI GOP driver’:
* 0x 2880 x 1800 x 32 (115200) Direct color, mask: 8/8/8/8 pos: 16/8/0/24
does not work:
videotest 2560x1600
videotest 640x480
videotest 1280x900
vbetest 640-480
error: can’t find command ‘vbetest’.
vbeinfo
error: can’t find command ‘vbeinfo’.
hwinfo --framebuffer
# has no output
ProblemType: Bug
DistroRelease: Ubuntu 22.04
Package: linux-image-5.15.0-37-generic 5.15.0-37.39
ProcVersionSignature: Ubuntu 5.15.0-37.39-generic 5.15.35
Uname: Linux 5.15.0-37-generic x86_64
NonfreeKernelModules: zfs zunicode zcommon znvpair zavl icp
ApportVersion: 2.20.11-0ubuntu82.1
Architecture: amd64
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path',
'/dev/snd/controlC0', '/dev/snd/hwC0D2', '/dev/snd/hwC0D0',
'/dev/snd/pcmC0D10p', '/dev/snd/pcmC0D9p', '/dev/snd/pcmC0D8p',
'/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/seq', '/dev/snd/timer']
failed with exit code 1:
CasperMD5CheckResult: pass
Date: Sat Jun 11 21:42:57 2022
HibernationDevice: RESUME=none
InstallationDate: Installed on 2021-10-31 (223 days ago)
InstallationMedia: Ubuntu 21.10 "Impish Indri" - Release amd64 (20211012)
MachineType: Apple Inc. MacBookPro13,2
ProcEnviron:
SHELL=/bin/bash
LANG=en_US.UTF-8
TERM=screen
PATH=(custom, no user)
ProcFB: 0 i915drmfb
ProcKernelCmdLine: BOOT_IMAGE=/BOOT/ubuntu_gk5crv@/vmlinuz-5.15.0-37-generic
root=ZFS=rpool/ROOT/ubuntu_gk5crv ro
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions:
linux-restricted-modules-5.15.0-37-generic N/A
linux-backports-modules-5.15.0-37-generic N/A
linux-firmware 20220329.git681281e4-0ubuntu3.2
SourcePackage: linux
UpgradeStatus: Upgraded to jammy on 2022-06-11 (1 days ago)
dmi.bios.date: 09/25/2021
dmi.bios.release: 0.1
dmi.bios.vendor: Apple Inc.
dmi.bios.version: 447.40.12.0.0
dmi.board.name: Mac-66E35819EE2D0D05
dmi.board.vendor: Apple Inc.
dmi.board.version: MacBookPro13,2
dmi.chassis.type: 9
dmi.chassis.vendor: Apple Inc.
dmi.chassis.version: Mac-66E35819EE2D0D05
dmi.modalias:
[Kernel-packages] [Bug 1978396] [NEW] MacBook Pro 2016: 13” detected as 15”, wrong video mode
Public bug reported:
On a vanilla install of Ubuntu 22.04 and 21.10, boot is in a video mode
with 2880 vertical pixels, not the real 2560x1600
Impact: at the bottom of the display are 6–12 invisible lines, and during boot
and console work, the cursor is below the bottom of the screen
— external display has same problem
Root cause: the computer is detected as MacBookPro13,3 (2016 15”
2880x1800) when it is MacBookPro13,2 (2016 13” 2560x1600)
It appears impossible to change the video mode in grub, there is only one
device and it only has one mode. edid seems to claim that the display supports
both 2560x1400 and 2880x1800 which is false
The dumb thing of course picks 2880x1800
I have noticed that linux-hardware.org probes incorrectly lists the
computer as MacBookPro13,3
— no kernel setting can fix this
— once efi or grub chose a video mode during boot, it cannot be changed
— the hidden lines is where the cursor is, error messages are displayed
after boot, one can find:
get-edid | parse-edidThis is read-edid version 3.0.2. Prepare for some fun.
Attempting to use i2c interface
No EDID on bus 0
No EDID on bus 1
No EDID on bus 2
No EDID on bus 3
No EDID on bus 5
No EDID on bus 6
1 potential busses found: 4
256-byte EDID successfully retrieved from i2c bus 4
Looks like i2c was successful. Have a good day.
Checksum Correct
Section "Monitor"
Identifier "Color LCD"
ModelName "Color LCD"
VendorName "APP"
# Monitor Manufactured week 37 of 2015
# EDID version 1.4
# Digital Display
DisplaySize 290 180
Gamma 2.20
Option "DPMS" "false"
Modeline "Mode 0" 260.73 2560 2568 2600 2640 1600 1632 1640 1646 +hsync -vsync
Modeline "Mode 1" 328.92 2880 2888 2920 2960 1800 1838 1846 1852 +hsync -vsync
EndSection
for p in /sys/class/drm/*/status; do con=${p%/status}; echo -n
"${con#*/card?-}: "; cat $p; done
DP-1: disconnected
DP-2: disconnected
eDP-1: connected
HDMI-A-1: disconnected
HDMI-A-2: disconnected
kernel command-line options tested:
video=eDP-1:2560x1600@60
# does not work
video=eDP-1:640x480
# works but number of rows still wrong
grub:
videoinfo
List of supported video modes:
Legend: mask/position=red/green/blue/reserved
Adapter ‘Bochs PCI Video Driver’:
No info available
Adapter ‘Cirrus CLGD 5446 PCI Video Driver’:
No info available
Adapter ‘EFI GOP driver’:
* 0x 2880 x 1800 x 32 (115200) Direct color, mask: 8/8/8/8 pos: 16/8/0/24
does not work:
videotest 2560x1600
videotest 640x480
videotest 1280x900
vbetest 640-480
error: can’t find command ‘vbetest’.
vbeinfo
error: can’t find command ‘vbeinfo’.
hwinfo --framebuffer
# has no output
ProblemType: Bug
DistroRelease: Ubuntu 22.04
Package: linux-image-5.15.0-37-generic 5.15.0-37.39
ProcVersionSignature: Ubuntu 5.15.0-37.39-generic 5.15.35
Uname: Linux 5.15.0-37-generic x86_64
NonfreeKernelModules: zfs zunicode zcommon znvpair zavl icp
ApportVersion: 2.20.11-0ubuntu82.1
Architecture: amd64
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path',
'/dev/snd/controlC0', '/dev/snd/hwC0D2', '/dev/snd/hwC0D0',
'/dev/snd/pcmC0D10p', '/dev/snd/pcmC0D9p', '/dev/snd/pcmC0D8p',
'/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/seq', '/dev/snd/timer']
failed with exit code 1:
CasperMD5CheckResult: pass
Date: Sat Jun 11 21:42:57 2022
HibernationDevice: RESUME=none
InstallationDate: Installed on 2021-10-31 (223 days ago)
InstallationMedia: Ubuntu 21.10 "Impish Indri" - Release amd64 (20211012)
MachineType: Apple Inc. MacBookPro13,2
ProcEnviron:
SHELL=/bin/bash
LANG=en_US.UTF-8
TERM=screen
PATH=(custom, no user)
ProcFB: 0 i915drmfb
ProcKernelCmdLine: BOOT_IMAGE=/BOOT/ubuntu_gk5crv@/vmlinuz-5.15.0-37-generic
root=ZFS=rpool/ROOT/ubuntu_gk5crv ro
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions:
linux-restricted-modules-5.15.0-37-generic N/A
linux-backports-modules-5.15.0-37-generic N/A
linux-firmware 20220329.git681281e4-0ubuntu3.2
SourcePackage: linux
UpgradeStatus: Upgraded to jammy on 2022-06-11 (1 days ago)
dmi.bios.date: 09/25/2021
dmi.bios.release: 0.1
dmi.bios.vendor: Apple Inc.
dmi.bios.version: 447.40.12.0.0
dmi.board.name: Mac-66E35819EE2D0D05
dmi.board.vendor: Apple Inc.
dmi.board.version: MacBookPro13,2
dmi.chassis.type: 9
dmi.chassis.vendor: Apple Inc.
dmi.chassis.version: Mac-66E35819EE2D0D05
dmi.modalias:
dmi:bvnAppleInc.:bvr447.40.12.0.0:bd09/25/2021:br0.1:svnAppleInc.:pnMacBookPro13,2:pvr1.0:rvnAppleInc.:rnMac-66E35819EE2D0D05:rvrMacBookPro13,2:cvnAppleInc.:ct9:cvrMac-66E35819EE2D0D05:sku:
dmi.product.family: MacBook Pro
dmi.product.name: MacBookPro13,2
dmi.product.version: 1.0
dmi.sys.vendor: Apple Inc.
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug jammy
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1978396
Title:
[Kernel-packages] [Bug 1978392] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1978392 Title: Filesystem goes to read-only after long sleep Status in linux package in Ubuntu: Confirmed Bug description: If the laptop is slept of a long time > 12h on battery, the system will wake up, but the filesystem is read-only. Running dmesg is not possible as this results in an I/O error, so it seems that it is related to the nvme driver / disk. Running the 5.18 kernel from launchpad gives similar results, with that kernel the nvme also stops working after battery sleep. The problem doesn't happen when the laptop sleeps, but is connected to the mains power, sleep isn't affected. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-generic (not installed) ProcVersionSignature: Ubuntu 5.15.0-37.39-generic 5.15.35 Uname: Linux 5.15.0-37-generic x86_64 NonfreeKernelModules: zfs zunicode zcommon znvpair zavl icp ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: woutervb 2332 F pulseaudio /dev/snd/controlC1: woutervb 2332 F pulseaudio /dev/snd/controlC0: woutervb 2332 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sun Jun 12 12:41:40 2022 InstallationDate: Installed on 2022-05-31 (11 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) MachineType: LENOVO 21A0006GAU ProcFB: 0 amdgpudrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.15.0-37-generic root=/dev/mapper/vgubuntu-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.15.0-37-generic N/A linux-backports-modules-5.15.0-37-generic N/A linux-firmware 20220329.git681281e4-0ubuntu3.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/05/2021 dmi.bios.release: 1.13 dmi.bios.vendor: LENOVO dmi.bios.version: R1MET43W (1.13 ) dmi.board.asset.tag: Not Available dmi.board.name: 21A0006GAU dmi.board.vendor: LENOVO dmi.board.version: SDK0T76538 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.ec.firmware.release: 1.13 dmi.modalias: dmi:bvnLENOVO:bvrR1MET43W(1.13):bd11/05/2021:br1.13:efr1.13:svnLENOVO:pn21A0006GAU:pvrThinkPadP14sGen2a:rvnLENOVO:rn21A0006GAU:rvrSDK0T76538WIN:cvnLENOVO:ct10:cvrNone:skuLENOVO_MT_21A0_BU_Think_FM_ThinkPadP14sGen2a: dmi.product.family: ThinkPad P14s Gen 2a dmi.product.name: 21A0006GAU dmi.product.sku: LENOVO_MT_21A0_BU_Think_FM_ThinkPad P14s Gen 2a dmi.product.version: ThinkPad P14s Gen 2a dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1978392/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1978392] [NEW] Filesystem goes to read-only after long sleep
Public bug reported: If the laptop is slept of a long time > 12h on battery, the system will wake up, but the filesystem is read-only. Running dmesg is not possible as this results in an I/O error, so it seems that it is related to the nvme driver / disk. Running the 5.18 kernel from launchpad gives similar results, with that kernel the nvme also stops working after battery sleep. The problem doesn't happen when the laptop sleeps, but is connected to the mains power, sleep isn't affected. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-generic (not installed) ProcVersionSignature: Ubuntu 5.15.0-37.39-generic 5.15.35 Uname: Linux 5.15.0-37-generic x86_64 NonfreeKernelModules: zfs zunicode zcommon znvpair zavl icp ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: woutervb 2332 F pulseaudio /dev/snd/controlC1: woutervb 2332 F pulseaudio /dev/snd/controlC0: woutervb 2332 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sun Jun 12 12:41:40 2022 InstallationDate: Installed on 2022-05-31 (11 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) MachineType: LENOVO 21A0006GAU ProcFB: 0 amdgpudrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.15.0-37-generic root=/dev/mapper/vgubuntu-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.15.0-37-generic N/A linux-backports-modules-5.15.0-37-generic N/A linux-firmware 20220329.git681281e4-0ubuntu3.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/05/2021 dmi.bios.release: 1.13 dmi.bios.vendor: LENOVO dmi.bios.version: R1MET43W (1.13 ) dmi.board.asset.tag: Not Available dmi.board.name: 21A0006GAU dmi.board.vendor: LENOVO dmi.board.version: SDK0T76538 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.ec.firmware.release: 1.13 dmi.modalias: dmi:bvnLENOVO:bvrR1MET43W(1.13):bd11/05/2021:br1.13:efr1.13:svnLENOVO:pn21A0006GAU:pvrThinkPadP14sGen2a:rvnLENOVO:rn21A0006GAU:rvrSDK0T76538WIN:cvnLENOVO:ct10:cvrNone:skuLENOVO_MT_21A0_BU_Think_FM_ThinkPadP14sGen2a: dmi.product.family: ThinkPad P14s Gen 2a dmi.product.name: 21A0006GAU dmi.product.sku: LENOVO_MT_21A0_BU_Think_FM_ThinkPad P14s Gen 2a dmi.product.version: ThinkPad P14s Gen 2a dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1978392 Title: Filesystem goes to read-only after long sleep Status in linux package in Ubuntu: New Bug description: If the laptop is slept of a long time > 12h on battery, the system will wake up, but the filesystem is read-only. Running dmesg is not possible as this results in an I/O error, so it seems that it is related to the nvme driver / disk. Running the 5.18 kernel from launchpad gives similar results, with that kernel the nvme also stops working after battery sleep. The problem doesn't happen when the laptop sleeps, but is connected to the mains power, sleep isn't affected. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-generic (not installed) ProcVersionSignature: Ubuntu 5.15.0-37.39-generic 5.15.35 Uname: Linux 5.15.0-37-generic x86_64 NonfreeKernelModules: zfs zunicode zcommon znvpair zavl icp ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: woutervb 2332 F pulseaudio /dev/snd/controlC1: woutervb 2332 F pulseaudio /dev/snd/controlC0: woutervb 2332 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sun Jun 12 12:41:40 2022 InstallationDate: Installed on 2022-05-31 (11 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) MachineType: LENOVO 21A0006GAU ProcFB: 0 amdgpudrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.15.0-37-generic root=/dev/mapper/vgubuntu-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.15.0-37-generic N/A linux-backports-modules-5.15.0-37-generic N/A linux-firmware 20220329.git681281e4-0ubuntu3.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/05/2021 dmi.bios.release: 1.13 dmi.bios.vendor: LENOVO dmi.bios.version: R1MET43W (1.13 ) dmi.board.asset.tag: Not Available dmi.board.name: 21A0006GAU dmi.board.vendor: LENOVO dmi.board.version: SDK0T76538 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO
[Kernel-packages] [Bug 1967205] Re: Lenovo laptop doesn't wake from sleep with kernel newer than 5.13.0-27-generic
This issue was resolved for me after the upgrade to 22.04. Currently on 5.15.0-33-generic without issue. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1967205 Title: Lenovo laptop doesn't wake from sleep with kernel newer than 5.13.0-27-generic Status in linux package in Ubuntu: Confirmed Bug description: Issue: When closing the lid, my Lenovo 6 laptop goes to sleep, but when opening the lid the laptop will not wake from sleep when using a kernel newer than 5.13.0-27-generic. Pressing keys or the power button also does not wake the laptop from sleep. Expected behavior: The laptop should wake from sleep when opening the laptop lid when using the newest kernel. Steps to reproduce: 1. Boot laptop using kernel 5.13.0-27-generic 2. Close lid to put laptop to sleep 3. Open laptop lid and see laptop resume from sleep 4. Boot laptop with kernel newer than 5.13.0-27-generic 5. Close lid to put laptop to sleep 6. Open laptop lid and see laptop never resumes from sleep Work around: Hold the power button until laptop powers off. Press the power button again to power on the laptop Release: Ubuntu 21.10 Machine: Lenovo Yoga 6 laptop ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: linux-image-5.13.0-39-generic 5.13.0-39.44 ProcVersionSignature: Ubuntu 5.13.0-39.44-generic 5.13.19 Uname: Linux 5.13.0-39-generic x86_64 ApportVersion: 2.20.11-0ubuntu71 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: cale 1963 F pulseaudio /dev/snd/controlC2: cale 1963 F pulseaudio /dev/snd/controlC0: cale 1963 F pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Wed Mar 30 21:50:57 2022 InstallationDate: Installed on 2021-12-06 (114 days ago) InstallationMedia: Ubuntu 21.10 "Impish Indri" - Release amd64 (20211012) MachineType: LENOVO 82ND ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 amdgpudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.13.0-39-generic root=UUID=5f98fca4-658f-4f22-8c2b-f320c086f693 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.13.0-39-generic N/A linux-backports-modules-5.13.0-39-generic N/A linux-firmware 1.201.5 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/28/2021 dmi.bios.release: 1.10 dmi.bios.vendor: LENOVO dmi.bios.version: H6CN10WW(V1.03) dmi.board.asset.tag: NO Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40709 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 31 dmi.chassis.vendor: LENOVO dmi.chassis.version: Yoga 6 13ALC6 dmi.ec.firmware.release: 1.10 dmi.modalias: dmi:bvnLENOVO:bvrH6CN10WW(V1.03):bd05/28/2021:br1.10:efr1.10:svnLENOVO:pn82ND:pvrYoga613ALC6:rvnLENOVO:rnLNVNB161216:rvrSDK0J40709WIN:cvnLENOVO:ct31:cvrYoga613ALC6:skuLENOVO_MT_82ND_BU_idea_FM_Yoga613ALC6: dmi.product.family: Yoga 6 13ALC6 dmi.product.name: 82ND dmi.product.sku: LENOVO_MT_82ND_BU_idea_FM_Yoga 6 13ALC6 dmi.product.version: Yoga 6 13ALC6 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1967205/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1348890] Re: Asus UX32LN: Brightness keys Fn+F5 and Fn+F6 don't generate evdev event
This was fixed long ago for me. I think it's safe to close this since no one posted here for 5 years. ** Changed in: linux (Ubuntu) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1348890 Title: Asus UX32LN: Brightness keys Fn+F5 and Fn+F6 don't generate evdev event Status in Linux: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: Hello Community, It seems brightness keys don't work with latest Ubuntu 14.04 LTS for laptop Asus Zenbook UX32LN. sudo dmidecode -s bios-version UX32LN.203 To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1348890/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1967274] Re: Screen sometimes can't update [Failed to post KMS update: CRTC property (GAMMA_LUT) not found]
I am using kernel v5.15.0-37 but I am still affected by this bug on my
XPS 15 (9500). Installed mutter is 42.1.
Also, the Night Light is not working (I saw some references in this
thread about this feature).
Is there anything else I must update on my system to have it working
properly?
Thanks!
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1967274
Title:
Screen sometimes can't update [Failed to post KMS update: CRTC
property (GAMMA_LUT) not found]
Status in Mutter:
Fix Released
Status in OEM Priority Project:
Fix Released
Status in linux package in Ubuntu:
Invalid
Status in mutter package in Ubuntu:
Fix Released
Status in linux source package in Jammy:
Fix Released
Status in mutter source package in Jammy:
Fix Released
Bug description:
Screen can't turn back on by clicking keyboard after screen off by meta + l
key.
Try to do VT switch can make the screen back, some error poped when I try to
wake up screen.
gnome-shell[1666]: Failed to post KMS update: CRTC property (GAMMA_LUT) not
found
gnome-shell[1666]: Failed to post KMS update: CRTC property (GAMMA_LUT) not
found
gnome-shell[1666]: Failed to post KMS update: drmModeAtomicCommit: Invalid
argument
gnome-shell[1666]: Failed to post KMS update: drmModeAtomicCommit: Invalid
argument
gnome-shell[1666]: Failed to post KMS update: drmModeAtomicCommit: Invalid
argument
---
ProblemType: Bug
ApportVersion: 2.20.11-0ubuntu79
Architecture: amd64
CasperMD5CheckResult: pass
CurrentDesktop: ubuntu:GNOME
DisplayManager: gdm3
DistroRelease: Ubuntu 22.04
GsettingsChanges:
b'org.gnome.shell' b'welcome-dialog-last-shown-version' b"'42.beta'"
b'org.gnome.desktop.input-sources' b'sources' b"[('xkb', 'us')]"
b'org.gnome.desktop.interface' b'gtk-im-module' b"'gtk-im-context-simple'"
b'org.gnome.desktop.privacy' b'report-technical-problems' b'true'
InstallationDate: Installed on 2022-03-31 (0 days ago)
InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20220326)
Package: gnome-shell 42~beta-1ubuntu3 [origin: unknown]
PackageArchitecture: amd64
ProcVersionSignature: Ubuntu 5.15.0-23.23-generic 5.15.27
RelatedPackageVersions: mutter-common 42~beta-1ubuntu2
Tags: wayland-session jammy third-party-packages
Uname: Linux 5.15.0-23-generic x86_64
UnreportableReason: This does not seem to be an official Ubuntu package.
Please retry after updating the indexes of available packages, if that does not
work then remove related third party packages and try again.
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo
_MarkForUpload: True
==
SRU Justification
[Impact]
The backlight power won't come back after the meta + l to turn off the
display on ADL machines.
[Fix]
Below series of commits from v5.17 fix this issue
1c7ab5affa5e drm/i915/xelpd: Add Pipe Color Lut caps to platform config
17815f624a90 drm/i915/xelpd: Enable Pipe Degamma
e83c18cffaed drm/i915/xelpd: Enable Pipe color support for D13 platform
[Test]
Verified on at least 2 different machines, the backlight is on after the
screen dimmed with touchpad movement or key stroke.
[Where problems could occcur]
The patches only affect ADL-P and up.
To manage notifications about this bug go to:
https://bugs.launchpad.net/mutter/+bug/1967274/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1884232] Re: touchpad and touchscreen doesn't work at all on ACER Spin 5 (SP513-54N)
Thanks for informing us, Bjorn. That means the safest way to go is wait until one's favourite distro ships kernel 5.19, which requires 5.19 be oficially out (non-rc stable final) - any estimates how long this might be (how much time kernel updates usually need to get from RC1 to final release?) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1884232 Title: touchpad and touchscreen doesn't work at all on ACER Spin 5 (SP513-54N) Status in linux package in Ubuntu: Confirmed Bug description: Touchpad is not working at all on ACER Spin 5 SP513-54N. According to https://wiki.ubuntu.com/DebuggingTouchpadDetection#In_case_your_Touchpad_doesn.27t_work_at_all_.28No_response_from_the_Touchpad.29 I am creating this kernel bug issue. There are more issues, too, like touchscreen not working and Ubuntu not installable - see here if interrested https://askubuntu.com/questions/1251719/ I would like to run Ubuntu on this machine and I am willing to help with any debug or kernel tweaking... Please let me know. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4195 F pulseaudio CasperMD5CheckResult: skip CasperVersion: 1.445 CurrentDesktop: ubuntu:GNOME Date: Fri Jun 19 10:44:58 2020 LiveMediaBuild: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: Acer Spin SP513-54N ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed maybe-ubiquity quiet splash --- RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/21/2020 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.00 dmi.board.name: Caboom_IL dmi.board.vendor: IL dmi.board.version: V1.00 dmi.chassis.type: 31 dmi.chassis.vendor: Acer dmi.chassis.version: V1.00 dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.00:bd02/21/2020:svnAcer:pnSpinSP513-54N:pvrV1.00:rvnIL:rnCaboom_IL:rvrV1.00:cvnAcer:ct31:cvrV1.00: dmi.product.family: Spin 5 dmi.product.name: Spin SP513-54N dmi.product.sku: dmi.product.version: V1.00 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1884232/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1970957] Re: suspend problem
I also installed kernel 5.18 in my Thinkpad Carbon X1 4th gen and suspend works as expected but not all the times. Some times the laptop doesnt suspend. I also get an error message (usb failed to query get_info ...) when booting. It is strange because all my usb ports, camera, etc work fine. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1970957 Title: suspend problem Status in linux package in Ubuntu: Confirmed Bug description: I've installed Ubuntu 22.04 on the ThinkPad E480. Suspend functions ok intermittently. Some times it works fine, other times the computer does not enter the suspend mode (the screen gets blank, but the machine is still running and the ThinPad led is on, and there is no way out... no response from keyboard or mouse... the only solution is to switch off manually hitting and holding the power button), other times the machine does not wakes up from suspension mode. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: ubuntu-release-upgrader-core 1:22.04.10 ProcVersionSignature: Ubuntu 5.15.0-27.28-generic 5.15.30 Uname: Linux 5.15.0-27-generic x86_64 ApportVersion: 2.20.11-0ubuntu82 Architecture: amd64 CasperMD5CheckResult: pass CrashDB: ubuntu CurrentDesktop: ubuntu:GNOME Date: Fri Apr 29 10:53:59 2022 EcryptfsInUse: Yes InstallationDate: Installed on 2022-04-24 (4 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) PackageArchitecture: all SourcePackage: ubuntu-release-upgrader Symptom: dist-upgrade UpgradeStatus: No upgrade log present (probably fresh install) --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: leoca 1913 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 EcryptfsInUse: Yes InstallationDate: Installed on 2022-04-24 (4 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) MachineType: LENOVO 20KQ000EBR Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-27-generic root=UUID=1e7d6212-699d-4319-b137-8a7059545433 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.15.0-27.28-generic 5.15.30 RelatedPackageVersions: linux-restricted-modules-5.15.0-27-generic N/A linux-backports-modules-5.15.0-27-generic N/A linux-firmware 20220329.git681281e4-0ubuntu1 Tags: jammy Uname: Linux 5.15.0-27-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 06/14/2018 dmi.bios.release: 1.19 dmi.bios.vendor: LENOVO dmi.bios.version: R0PET42W (1.19 ) dmi.board.asset.tag: Not Available dmi.board.name: 20KQ000EBR dmi.board.vendor: LENOVO dmi.board.version: SDK0J40697 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.ec.firmware.release: 1.19 dmi.modalias: dmi:bvnLENOVO:bvrR0PET42W(1.19):bd06/14/2018:br1.19:efr1.19:svnLENOVO:pn20KQ000EBR:pvrThinkPadE480:rvnLENOVO:rn20KQ000EBR:rvrSDK0J40697WIN:cvnLENOVO:ct10:cvrNone:skuLENOVO_MT_20KQ_BU_Think_FM_ThinkPadE480: dmi.product.family: ThinkPad E480 dmi.product.name: 20KQ000EBR dmi.product.sku: LENOVO_MT_20KQ_BU_Think_FM_ThinkPad E480 dmi.product.version: ThinkPad E480 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1970957/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1958386] Re: bpfilter umh restarts
hi when we update kernel to 5.18.3 this error occurs for example when you use ufw command. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1958386 Title: bpfilter umh restarts Status in linux package in Ubuntu: Expired Bug description: [Impact] When booting a system, lots of error messages regarding bpfilter are observed, like below. These indicate that the bpfilter user mode helper is exiting after reading the request message. [Test case] Boot a system and do not observe messages like "bpfilter: read fail 0" during boot. [ 260.724579] bpfilter: read fail 0 [ 260.784373] bpfilter: Loaded bpfilter_umh pid 2553 [ 260.784951] bpfilter: read fail 0 [ 260.855731] bpfilter: Loaded bpfilter_umh pid 2555 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1958386/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1905142] Re: [amdgpu] When entering sleep mode the monitors turn off then immediately turn back on
This happens to me as well on Ubuntu 20.04.4 LTS with Xorg on a Tuxedo Pulse 15 (AMD Ryzen 7 4800H with Radeon Graphics), but only when I plug an external HDMI 4k monitor. Sometimes I see the same error message, but most of the time the warning that seems related to the screen going black is: Jun 11 00:03:36 ardoise /usr/lib/gdm3/gdm-x-session[358811]: (WW) EDID timing clock 138.50 exceeds claimed max 135MHz, fixing -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1905142 Title: [amdgpu] When entering sleep mode the monitors turn off then immediately turn back on Status in linux package in Ubuntu: Confirmed Bug description: every time that happens the following message is shown in syslog: /usr/libexec/gdm-x-session[3330]: (EE) AMDGPU(0): drmmode_do_crtc_dpms cannot get last vblank counter ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: xorg 1:7.7+19ubuntu15 ProcVersionSignature: Ubuntu 5.8.0-30.32-generic 5.8.17 Uname: Linux 5.8.0-30-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.11-0ubuntu50.2 Architecture: amd64 BootLog: CasperMD5CheckResult: skip CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sat Nov 21 18:38:27 2020 DistUpgraded: 2020-11-18 01:07:32,653 ERROR got error from PostInstallScript ./xorg_fix_proprietary.py (g-exec-error-quark: Failed to execute child process “./xorg_fix_proprietary.py” (No such file or directory) (8)) DistroCodename: groovy DistroVariant: ubuntu ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] [1002:731f] (rev c1) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] [1458:2316] MachineType: Gigabyte Technology Co., Ltd. AB350-Gaming ProcEnviron: LANGUAGE=en_IE:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_IE.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.8.0-30-generic root=UUID=556540f5-c271-4a31-8207-81a7fcaac401 ro amdgpu.dc=1 SourcePackage: xorg UpgradeStatus: Upgraded to groovy on 2020-11-18 (3 days ago) dmi.bios.date: 11/27/2019 dmi.bios.release: 5.14 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F50a dmi.board.asset.tag: Default string dmi.board.name: AB350-Gaming-CF dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF50a:bd11/27/2019:br5.14:svnGigabyteTechnologyCo.,Ltd.:pnAB350-Gaming:pvrDefaultstring:rvnGigabyteTechnologyCo.,Ltd.:rnAB350-Gaming-CF:rvrx.x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string dmi.product.name: AB350-Gaming dmi.product.sku: Default string dmi.product.version: Default string dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2016-03-16T23:17:19.931496 version.compiz: compiz 1:0.9.14.1+20.10.20200813-0ubuntu1 version.libdrm2: libdrm2 2.4.102-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 20.2.1-1 version.libgl1-mesa-glx: libgl1-mesa-glx 20.2.1-1 version.xserver-xorg-core: xserver-xorg-core 2:1.20.9-2ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.6-2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 xserver.bootTime: Tue Nov 17 23:04:32 2020 xserver.configfile: default xserver.errors: open /dev/dri/card0: No such file or directory open /dev/dri/card0: No such file or directory Screen 0 deleted because of no matching config section. xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.20.8-2ubuntu2.4 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1905142/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1959685] Re: Kernel BUG with btrfs on linux 5.13
I'm now trying to run v5.15 kernel after months of v5.4 running without crashes on BTRFS. On first boot with v5.15 I've got on dmesg ... [ 63.021417] BTRFS warning (device sdb): block group 12481442611200 has wrong amount of free space [ 63.021424] BTRFS warning (device sdb): failed to load free space cache for block group 12481442611200, rebuilding it now ..., which I didn't get with either v5.11 or v5.13. Maybe this corruption was the problem that v5.4 ignored, and v5.11/v5.13 crashed on. Uptime with v5.15 is 2 days so far. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1959685 Title: Kernel BUG with btrfs on linux 5.13 Status in linux package in Ubuntu: Expired Bug description: I am hitting the below kernel oops every 2-5 days on my home server box. RIP is always "0010:btrfs_evict_inode+0xa1/0x480 [btrfs]" and address is always "0068". I'm using btrfs in raid1 configuration for general storage. === Feb 1 01:40:38 server kernel: [172867.493851] BUG: kernel NULL pointer dereference, address: 0068 Feb 1 01:40:38 server kernel: [172867.493885] #PF: supervisor write access in kernel mode Feb 1 01:40:38 server kernel: [172867.493903] #PF: error_code(0x0002) - not-present page Feb 1 01:40:38 server kernel: [172867.493920] PGD 0 P4D 0 Feb 1 01:40:38 server kernel: [172867.493931] Oops: 0002 [#1] SMP PTI Feb 1 01:40:38 server kernel: [172867.493946] CPU: 2 PID: 104 Comm: kswapd0 Not tainted 5.13.0-27-generic #29~20.04.1-Ubuntu Feb 1 01:40:38 server kernel: [172867.493972] Hardware name: Gigabyte Technology Co., Ltd. H67MA-D2H-B3/H67MA-D2H-B3, BIOS F1 02/11/2011 Feb 1 01:40:38 server kernel: [172867.493999] RIP: 0010:btrfs_evict_inode+0xa1/0x480 [btrfs] Feb 1 01:40:38 server kernel: [172867.494070] Code: fd ff ff e8 d1 b1 9f c8 65 48 8b 04 25 c0 7b 01 00 48 89 45 b8 49 8b 84 24 f0 fd ff ff 48 85 c0 74 55 4d 8b b4 24 f8 fd ff ff 41 80 66 68 fe f0 41 80 66 68 f7 4c 89 f6 4c 89 ff e8 98 00 01 Feb 1 01:40:38 server kernel: [172867.494123] RSP: 0018:ab8dc042fad0 EFLAGS: 00010202 Feb 1 01:40:38 server kernel: [172867.494141] RAX: 0004 RBX: 8f01001251d8 RCX: 8f0100125040 Feb 1 01:40:38 server kernel: [172867.494163] RDX: 00ff RSI: RDI: 8f01001251d0 Feb 1 01:40:38 server kernel: [172867.494185] RBP: ab8dc042fb28 R08: R09: Feb 1 01:40:38 server kernel: [172867.494206] R10: 8f00c2ea6280 R11: 0001 R12: 8f01001253c0 Feb 1 01:40:38 server kernel: [172867.494228] R13: 8f01001251d0 R14: R15: 8f01001251b0 Feb 1 01:40:38 server kernel: [172867.494250] FS: () GS:8f03cfa8() knlGS: Feb 1 01:40:38 server kernel: [172867.494274] CS: 0010 DS: ES: CR0: 80050033 Feb 1 01:40:38 server kernel: [172867.494293] CR2: 0068 CR3: 000202810001 CR4: 000606e0 Feb 1 01:40:38 server kernel: [172867.494315] Call Trace: Feb 1 01:40:38 server kernel: [172867.494328] evict+0xd2/0x180 Feb 1 01:40:38 server kernel: [172867.494342] dispose_list+0x39/0x50 Feb 1 01:40:38 server kernel: [172867.494356] prune_icache_sb+0x5c/0x80 Feb 1 01:40:38 server kernel: [172867.494370] super_cache_scan+0x132/0x1b0 Feb 1 01:40:38 server kernel: [172867.494386] do_shrink_slab+0x144/0x2c0 Feb 1 01:40:38 server kernel: [172867.494402] shrink_slab+0x215/0x2b0 Feb 1 01:40:38 server kernel: [172867.494416] shrink_node+0x2dd/0x6f0 Feb 1 01:40:38 server kernel: [172867.494430] balance_pgdat+0x322/0x5f0 Feb 1 01:40:38 server kernel: [172867.494445] kswapd+0x1f8/0x380 Feb 1 01:40:38 server kernel: [172867.494458] ? wait_woken+0x80/0x80 Feb 1 01:40:38 server kernel: [172867.494473] ? balance_pgdat+0x5f0/0x5f0 Feb 1 01:40:38 server kernel: [172867.494487] kthread+0x12b/0x150 Feb 1 01:40:38 server kernel: [172867.494501] ? set_kthread_struct+0x40/0x40 Feb 1 01:40:38 server kernel: [172867.494516] ret_from_fork+0x22/0x30 Feb 1 01:40:38 server kernel: [172867.494532] Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defra g_ipv6 nf_defrag_ipv4 bpfilter br_netfilter bridge stp llc aufs overlay snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_code c snd_hda_core snd_hwdep snd_pcm intel_rapl_msr snd_seq_midi snd_seq_midi_event mei_hdcp intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp snd_rawmidi kvm_intel kvm snd_seq crct10dif_pclmul ghash_ clmulni_intel snd_seq_device cryptd i915 rapl snd_timer intel_cstate serio_raw joydev drm_kms_helper
