[Kernel-packages] [Bug 2079246] Re: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console
I removed the package linux-image-generic-hwe-22.04, the computer runs perfectly with standard 5.15 kernel. I removed the Nvidia 8400GS additional card, then reinstalled the linux- image-generic-hwe-22.04 package. The computer runs perfectly with kernel 6.8.0-40-generic. I believe one can conclude to an incompatibility between nouveau and this kernel, probably with old cards only. I hope someone will be able to fix the problem, as it's very unpleasant and disappointing... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christele 1894 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2023-09-23 (350 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IwConfig: lono wireless extensions. eno1 no wireless extensions. MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.5.0-45-generic N/A linux-backports-modules-6.5.0-45-generic N/A linux-firmware20220329.git681281e4-0ubuntu3.31 RfKill: Tags: jammy Uname: Linux 6.5.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 04/04/2016 dmi.bios.release: 2.29 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: J01 v02.29 dmi.board.asset.tag: CZC2214XXD dmi.board.name: 1497 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC2214XXD dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP Compaq 6200 Pro MT PC dmi.product.sku: XL504AV dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/2079246/+attachment/5814445/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christele 1894 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2023-09-23 (350 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IwConfig: lono wireless extensions. eno1 no wireless extensions. MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.5.0-45-generic N/A linux-backports-modules-6.5.0-45-generic N/A linux-firmware20220329.git681281e4-0ubuntu3.31 RfKill: Tags: jammy Uname: Linux 6.5.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 04/04/2016 dmi.bios.release: 2.29 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: J01 v02.29 dmi.board.asset.tag: CZC2214XXD dmi.board.name: 1497 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC2214XXD dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP Compaq 6200 Pro MT PC dmi.product.sku: XL504AV dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/2079246/+attachment/5814442/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christele 1894 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2023-09-23 (350 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IwConfig: lono wireless extensions. eno1 no wireless extensions. MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.5.0-45-generic N/A linux-backports-modules-6.5.0-45-generic N/A linux-firmware20220329.git681281e4-0ubuntu3.31 RfKill: Tags: jammy Uname: Linux 6.5.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 04/04/2016 dmi.bios.release: 2.29 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: J01 v02.29 dmi.board.asset.tag: CZC2214XXD dmi.board.name: 1497 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC2214XXD dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP Compaq 6200 Pro MT PC dmi.product.sku: XL504AV dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/2079246/+attachment/5814434/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christele 1894 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2023-09-23 (350 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IwConfig: lono wireless extensions. eno1 no wireless extensions. MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.5.0-45-generic N/A linux-backports-modules-6.5.0-45-generic N/A linux-firmware20220329.git681281e4-0ubuntu3.31 RfKill: Tags: jammy Uname: Linux 6.5.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 04/04/2016 dmi.bios.release: 2.29 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: J01 v02.29 dmi.board.asset.tag: CZC2214XXD dmi.board.name: 1497 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC2214XXD dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP Compaq 6200 Pro MT PC dmi.product.sku: XL504AV dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] acpidump.txt
apport information ** Attachment added: "acpidump.txt" https://bugs.launchpad.net/bugs/2079246/+attachment/5814447/+files/acpidump.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christele 1894 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2023-09-23 (350 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IwConfig: lono wireless extensions. eno1 no wireless extensions. MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.5.0-45-generic N/A linux-backports-modules-6.5.0-45-generic N/A linux-firmware20220329.git681281e4-0ubuntu3.31 RfKill: Tags: jammy Uname: Linux 6.5.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 04/04/2016 dmi.bios.release: 2.29 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: J01 v02.29 dmi.board.asset.tag: CZC2214XXD dmi.board.name: 1497 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC2214XXD dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP Compaq 6200 Pro MT PC dmi.product.sku: XL504AV dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/2079246/+attachment/581/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christele 1894 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2023-09-23 (350 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IwConfig: lono wireless extensions. eno1 no wireless extensions. MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.5.0-45-generic N/A linux-backports-modules-6.5.0-45-generic N/A linux-firmware20220329.git681281e4-0ubuntu3.31 RfKill: Tags: jammy Uname: Linux 6.5.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 04/04/2016 dmi.bios.release: 2.29 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: J01 v02.29 dmi.board.asset.tag: CZC2214XXD dmi.board.name: 1497 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC2214XXD dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP Compaq 6200 Pro MT PC dmi.product.sku: XL504AV dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/2079246/+attachment/5814446/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christele 1894 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2023-09-23 (350 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IwConfig: lono wireless extensions. eno1 no wireless extensions. MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.5.0-45-generic N/A linux-backports-modules-6.5.0-45-generic N/A linux-firmware20220329.git681281e4-0ubuntu3.31 RfKill: Tags: jammy Uname: Linux 6.5.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 04/04/2016 dmi.bios.release: 2.29 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: J01 v02.29 dmi.board.asset.tag: CZC2214XXD dmi.board.name: 1497 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC2214XXD dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP Compaq 6200 Pro MT PC dmi.product.sku: XL504AV dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/2079246/+attachment/5814441/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christele 1894 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2023-09-23 (350 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IwConfig: lono wireless extensions. eno1 no wireless extensions. MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.5.0-45-generic N/A linux-backports-modules-6.5.0-45-generic N/A linux-firmware20220329.git681281e4-0ubuntu3.31 RfKill: Tags: jammy Uname: Linux 6.5.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 04/04/2016 dmi.bios.release: 2.29 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: J01 v02.29 dmi.board.asset.tag: CZC2214XXD dmi.board.name: 1497 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC2214XXD dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP Compaq 6200 Pro MT PC dmi.product.sku: XL504AV dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/2079246/+attachment/5814443/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christele 1894 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2023-09-23 (350 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IwConfig: lono wireless extensions. eno1 no wireless extensions. MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.5.0-45-generic N/A linux-backports-modules-6.5.0-45-generic N/A linux-firmware20220329.git681281e4-0ubuntu3.31 RfKill: Tags: jammy Uname: Linux 6.5.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 04/04/2016 dmi.bios.release: 2.29 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: J01 v02.29 dmi.board.asset.tag: CZC2214XXD dmi.board.name: 1497 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC2214XXD dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP Compaq 6200 Pro MT PC dmi.product.sku: XL504AV dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] PaInfo.txt
apport information ** Attachment added: "PaInfo.txt" https://bugs.launchpad.net/bugs/2079246/+attachment/5814440/+files/PaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christele 1894 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2023-09-23 (350 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IwConfig: lono wireless extensions. eno1 no wireless extensions. MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.5.0-45-generic N/A linux-backports-modules-6.5.0-45-generic N/A linux-firmware20220329.git681281e4-0ubuntu3.31 RfKill: Tags: jammy Uname: Linux 6.5.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 04/04/2016 dmi.bios.release: 2.29 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: J01 v02.29 dmi.board.asset.tag: CZC2214XXD dmi.board.name: 1497 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC2214XXD dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP Compaq 6200 Pro MT PC dmi.product.sku: XL504AV dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] Lspci-vt.txt
apport information ** Attachment added: "Lspci-vt.txt" https://bugs.launchpad.net/bugs/2079246/+attachment/5814436/+files/Lspci-vt.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christele 1894 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2023-09-23 (350 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IwConfig: lono wireless extensions. eno1 no wireless extensions. MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.5.0-45-generic N/A linux-backports-modules-6.5.0-45-generic N/A linux-firmware20220329.git681281e4-0ubuntu3.31 RfKill: Tags: jammy Uname: Linux 6.5.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 04/04/2016 dmi.bios.release: 2.29 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: J01 v02.29 dmi.board.asset.tag: CZC2214XXD dmi.board.name: 1497 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC2214XXD dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP Compaq 6200 Pro MT PC dmi.product.sku: XL504AV dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/2079246/+attachment/5814435/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christele 1894 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2023-09-23 (350 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IwConfig: lono wireless extensions. eno1 no wireless extensions. MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.5.0-45-generic N/A linux-backports-modules-6.5.0-45-generic N/A linux-firmware20220329.git681281e4-0ubuntu3.31 RfKill: Tags: jammy Uname: Linux 6.5.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 04/04/2016 dmi.bios.release: 2.29 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: J01 v02.29 dmi.board.asset.tag: CZC2214XXD dmi.board.name: 1497 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC2214XXD dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP Compaq 6200 Pro MT PC dmi.product.sku: XL504AV dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] Lsusb-t.txt
apport information ** Attachment added: "Lsusb-t.txt" https://bugs.launchpad.net/bugs/2079246/+attachment/5814438/+files/Lsusb-t.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christele 1894 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2023-09-23 (350 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IwConfig: lono wireless extensions. eno1 no wireless extensions. MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.5.0-45-generic N/A linux-backports-modules-6.5.0-45-generic N/A linux-firmware20220329.git681281e4-0ubuntu3.31 RfKill: Tags: jammy Uname: Linux 6.5.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 04/04/2016 dmi.bios.release: 2.29 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: J01 v02.29 dmi.board.asset.tag: CZC2214XXD dmi.board.name: 1497 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC2214XXD dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP Compaq 6200 Pro MT PC dmi.product.sku: XL504AV dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] Lsusb-v.txt
apport information ** Attachment added: "Lsusb-v.txt" https://bugs.launchpad.net/bugs/2079246/+attachment/5814439/+files/Lsusb-v.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christele 1894 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2023-09-23 (350 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IwConfig: lono wireless extensions. eno1 no wireless extensions. MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.5.0-45-generic N/A linux-backports-modules-6.5.0-45-generic N/A linux-firmware20220329.git681281e4-0ubuntu3.31 RfKill: Tags: jammy Uname: Linux 6.5.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 04/04/2016 dmi.bios.release: 2.29 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: J01 v02.29 dmi.board.asset.tag: CZC2214XXD dmi.board.name: 1497 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC2214XXD dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP Compaq 6200 Pro MT PC dmi.product.sku: XL504AV dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/2079246/+attachment/5814437/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: christele 1894 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2023-09-23 (350 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IwConfig: lono wireless extensions. eno1 no wireless extensions. MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.5.0-45-generic N/A linux-backports-modules-6.5.0-45-generic N/A linux-firmware20220329.git681281e4-0ubuntu3.31 RfKill: Tags: jammy Uname: Linux 6.5.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 04/04/2016 dmi.bios.release: 2.29 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: J01 v02.29 dmi.board.asset.tag: CZC2214XXD dmi.board.name: 1497 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC2214XXD dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: dmi.product.family: 103C_53307F G=D dmi.product.name: HP Compaq 6200 Pro MT PC dmi.product.sku: XL504AV dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] Re: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console
apport information ** Tags added: apport-collected jammy ** Description changed: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu82.6 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: christele 1894 F pulseaudio + CRDA: N/A + CasperMD5CheckResult: pass + CurrentDesktop: ubuntu:GNOME + DistroRelease: Ubuntu 22.04 + InstallationDate: Installed on 2023-09-23 (350 days ago) + InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) + IwConfig: + lono wireless extensions. + + eno1 no wireless extensions. + MachineType: Hewlett-Packard HP Compaq 6200 Pro MT PC + Package: linux (not installed) + ProcEnviron: + TERM=xterm-256color + PATH=(custom, no user) + LANG=fr_FR.UTF-8 + SHELL=/bin/bash + ProcFB: 0 nouveaudrmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-45-generic root=UUID=caebb7ef-3a0b-4a41-8dbb-d64e6eae70a6 ro quiet splash vt.handoff=7 + ProcVersionSignature: Ubuntu 6.5.0-45.45~22.04.1-generic 6.5.13 + PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. + RelatedPackageVersions: + linux-restricted-modules-6.5.0-45-generic N/A + linux-backports-modules-6.5.0-45-generic N/A + linux-firmware20220329.git681281e4-0ubuntu3.31 + RfKill: + + Tags: jammy + Uname: Linux 6.5.0-45-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: N/A + _MarkForUpload: True + dmi.bios.date: 04/04/2016 + dmi.bios.release: 2.29 + dmi.bios.vendor: Hewlett-Packard + dmi.bios.version: J01 v02.29 + dmi.board.asset.tag: CZC2214XXD + dmi.board.name: 1497 + dmi.board.vendor: Hewlett-Packard + dmi.chassis.asset.tag: CZC2214XXD + dmi.chassis.type: 6 + dmi.chassis.vendor: Hewlett-Packard + dmi.modalias: dmi:bvnHewlett-Packard:bvrJ01v02.29:bd04/04/2016:br2.29:svnHewlett-Packard:pnHPCompaq6200ProMTPC:pvr:rvnHewlett-Packard:rn1497:rvr:cvnHewlett-Packard:ct6:cvr:skuXL504AV: + dmi.product.family: 103C_53307F G=D + dmi.product.name: HP Compaq 6200 Pro MT PC + dmi.product.sku: XL504AV + dmi.sys.vendor: Hewlett-Packard ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/2079246/+attachment/5814433/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional inform
[Kernel-packages] [Bug 2079246] Re: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console
I can't boot with 6.8 kernel, whether the "quiet splash" options are activated or not. As I wrote, everything is fine with previous 6.5 kernel. I get the "Direct firmware load for nouveau/nv98_fuc084 failed with error -2" line in dmesg after a normal boot process with this kernel. I installed the nouveau-firmware package, without any effect. I thus purged it. Would it be useful to run "apport-collect 2079246" with the 6.5 kernel ? I don't think so, but as I said, I'm not skilled enough to be sure of that... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux package in Ubuntu: Incomplete Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2079246] [NEW] System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console
Public bug reported: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! ** Affects: linux-meta-hwe-6.8 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-meta-hwe-6.8 in Ubuntu. https://bugs.launchpad.net/bugs/2079246 Title: System hanging at startup after seeing the line "Listening on Load/save RF Kill Switch Status" in console Status in linux-meta-hwe-6.8 package in Ubuntu: New Bug description: Hi, the system just hangs. When choosing not to use quiet & splash options on boot, I can see the last line before complete freeze, which starts with "Listening on Load/save RF Kill Switch Status". After that, a hard reboot is needed. I can boot on previous kernel without problem (linux- image-6.5.0-45-generic). After booting with previous kernel, all I can see in dmesg, near the end, is : [ 20.115597] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 20.115640] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 20.115643] nouveau :01:00.0: msvld: unable to load firmware data [ 20.115646] nouveau :01:00.0: msvld: init failed, -19 I'm not skilled enough to say whether it's relevant or not. My computer is an old HP 6200 MT with Intel Core i7-2600 and a Nvidia Geforce 8400GS additional graphic card. If I can help furthermore by providing any additional information, I will do it. I found two topis on the web where similar issues are reported : https://www.reddit.com/r/archlinux/comments/1dusm7g/os_booting_stuck_at_ok_started_load_save_rf_kill/ https://askubuntu.com/questions/1524855/kubuntu-22-04-problem-with-kernel-6-8-0-after-update-from-kernel-6-5-0-45-to-6 Thx ! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-meta-hwe-6.8/+bug/2079246/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1876632] Re: [nvidia] Corrupted shell textures when switching users or resuming from suspend
Same problem occurs for me with nvidia-driver-470. The graphical effect / issue is a bit different, yet. See attached pic... My Ubuntu 20.04 is as up-to-date as possible. The last suggested solution is working for me (restarting gnome-shell), but this is still annoying... I've just read this : https://www.reddit.com/r/gnome/comments/k5ea3g/text_and_icon_glitching_out_after_resuming_from/ so it seems we won't have any solution before quite a long time... Fed up with nvidia ! ** Attachment added: "Capture d’écran de 2021-08-09 12-53-14.png" https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1876632/+attachment/5517062/+files/Capture%20d%E2%80%99%C3%A9cran%20de%202021-08-09%2012-53-14.png -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-460 in Ubuntu. https://bugs.launchpad.net/bugs/1876632 Title: [nvidia] Corrupted shell textures when switching users or resuming from suspend Status in GNOME Shell: Unknown Status in gnome-shell package in Ubuntu: Triaged Status in mutter package in Ubuntu: Triaged Status in nvidia-graphics-drivers-440 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-460 package in Ubuntu: Confirmed Bug description: I recently installed ubuntu 20.04 on my computer, and I am running into an issue when I do the following: * Login with a user on desktop * Select switch user, and login as second user * Switch user again, and return to original user At this point, text and icons in the menubar / sidebar are corrupted. Text and icons in normal windows appear correctly. I have attached a screenshot of what this looks like. Screenshots: https://imgur.com/a/3ZFDLMc ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-28.32-generic 5.4.30 Uname: Linux 5.4.0-28-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..09.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/:09:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 440.64 Fri Feb 21 01:17:26 UTC 2020 GCC version: ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sun May 3 18:12:45 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation GP104 [GeForce GTX 1070] [10de:1b81] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. GP104 [GeForce GTX 1070] [1043:85a0] InstallationDate: Installed on 2020-05-03 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: Gigabyte Technology Co., Ltd. AX370-Gaming ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.4.0-28-generic root=/dev/mapper/vgubuntu-root ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F3 dmi.board.asset.tag: Default string dmi.board.name: AX370-Gaming-CF dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: se1 dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF3:bd06/19/2017:svnGigabyteTechnologyCo.,Ltd.:pnAX370-Gaming:pvrDefaultstring:rvnGigabyteTechnologyCo.,Ltd.:rnAX370-Gaming-CF:rvrse1:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string dmi.product.name: AX370-Gaming dmi.product.sku: Default string dmi.product.version: Default string dmi.sys.vendor: Gigabyte Technology Co., Ltd. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.101-2 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.4-2ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 20.0.4-2ubuntu1 version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1876632/+subscriptions -- Mailing list: https:
[Kernel-packages] [Bug 1854592] Re: kern.log flooded by ACPI error messages
I can't as I'm already at the latest version. Is there a way to prevent these messages to fill the logs ? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1854592 Title: kern.log flooded by ACPI error messages Status in linux package in Ubuntu: Confirmed Bug description: I use Ubuntu 19.10 AMD64 (completely up to date) on a Lenovo Thinkpad S1 Yoga 12, and I've just noticed that /var/log/kern.log is flooded by messages like : Nov 30 21:12:44 yoga kernel: [ 526.471259] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190703/nsarguments-204) Every about two seconds, 18 messages of this kind are recorded. What could I do to provide more informations ? ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: linux-image-5.3.0-23-generic 5.3.0-23.25 ProcVersionSignature: Ubuntu 5.3.0-23.25-generic 5.3.7 Uname: Linux 5.3.0-23-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: tley 1650 F pulseaudio /dev/snd/controlC1: tley 1650 F pulseaudio /dev/snd/pcmC1D0p: tley 1650 F...m pulseaudio Date: Sat Nov 30 21:18:09 2019 InstallationDate: Installed on 2019-11-17 (13 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: LENOVO 20DKS1MA00 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-23-generic root=UUID=6662e662-b3da-478c-bf6b-ea7d12495e6e ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.3.0-23-generic N/A linux-backports-modules-5.3.0-23-generic N/A linux-firmware1.183.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/24/2015 dmi.bios.vendor: LENOVO dmi.bios.version: JEET69WW (1.18 ) dmi.board.asset.tag: Not Available dmi.board.name: 20DKS1MA00 dmi.board.vendor: LENOVO dmi.board.version: SDK0E50510 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrJEET69WW(1.18):bd07/24/2015:svnLENOVO:pn20DKS1MA00:pvrThinkPadS1Yoga12:rvnLENOVO:rn20DKS1MA00:rvrSDK0E50510WIN:cvnLENOVO:ct10:cvrNone: dmi.product.family: ThinkPad S1 Yoga 12 dmi.product.name: 20DKS1MA00 dmi.product.sku: LENOVO_MT_20DK_BU_Think_FM_ThinkPad S1 Yoga 12 dmi.product.version: ThinkPad S1 Yoga 12 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1854592/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1854592] [NEW] kern.log flooded by ACPI error messages
Public bug reported: I use Ubuntu 19.10 AMD64 (completely up to date) on a Lenovo Thinkpad S1 Yoga 12, and I've just noticed that /var/log/kern.log is flooded by messages like : Nov 30 21:12:44 yoga kernel: [ 526.471259] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190703/nsarguments-204) Every about two seconds, 18 messages of this kind are recorded. What could I do to provide more informations ? ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: linux-image-5.3.0-23-generic 5.3.0-23.25 ProcVersionSignature: Ubuntu 5.3.0-23.25-generic 5.3.7 Uname: Linux 5.3.0-23-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: tley 1650 F pulseaudio /dev/snd/controlC1: tley 1650 F pulseaudio /dev/snd/pcmC1D0p: tley 1650 F...m pulseaudio Date: Sat Nov 30 21:18:09 2019 InstallationDate: Installed on 2019-11-17 (13 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: LENOVO 20DKS1MA00 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-23-generic root=UUID=6662e662-b3da-478c-bf6b-ea7d12495e6e ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.3.0-23-generic N/A linux-backports-modules-5.3.0-23-generic N/A linux-firmware1.183.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/24/2015 dmi.bios.vendor: LENOVO dmi.bios.version: JEET69WW (1.18 ) dmi.board.asset.tag: Not Available dmi.board.name: 20DKS1MA00 dmi.board.vendor: LENOVO dmi.board.version: SDK0E50510 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrJEET69WW(1.18):bd07/24/2015:svnLENOVO:pn20DKS1MA00:pvrThinkPadS1Yoga12:rvnLENOVO:rn20DKS1MA00:rvrSDK0E50510WIN:cvnLENOVO:ct10:cvrNone: dmi.product.family: ThinkPad S1 Yoga 12 dmi.product.name: 20DKS1MA00 dmi.product.sku: LENOVO_MT_20DK_BU_Think_FM_ThinkPad S1 Yoga 12 dmi.product.version: ThinkPad S1 Yoga 12 dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-bug eoan -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1854592 Title: kern.log flooded by ACPI error messages Status in linux package in Ubuntu: Confirmed Bug description: I use Ubuntu 19.10 AMD64 (completely up to date) on a Lenovo Thinkpad S1 Yoga 12, and I've just noticed that /var/log/kern.log is flooded by messages like : Nov 30 21:12:44 yoga kernel: [ 526.471259] ACPI: \_SB.PCI0.LPCB.EC0.ECRD: 1 arguments were passed to a non-method ACPI object (RegionField) (20190703/nsarguments-204) Every about two seconds, 18 messages of this kind are recorded. What could I do to provide more informations ? ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: linux-image-5.3.0-23-generic 5.3.0-23.25 ProcVersionSignature: Ubuntu 5.3.0-23.25-generic 5.3.7 Uname: Linux 5.3.0-23-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: tley 1650 F pulseaudio /dev/snd/controlC1: tley 1650 F pulseaudio /dev/snd/pcmC1D0p: tley 1650 F...m pulseaudio Date: Sat Nov 30 21:18:09 2019 InstallationDate: Installed on 2019-11-17 (13 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: LENOVO 20DKS1MA00 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-23-generic root=UUID=6662e662-b3da-478c-bf6b-ea7d12495e6e ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.3.0-23-generic N/A linux-backports-modules-5.3.0-23-generic N/A linux-firmware1.183.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/24/2015 dmi.bios.vendor: LENOVO dmi.bios.version: JEET69WW (1.18 ) dmi.board.asset.tag: Not Available dmi.board.name: 20DKS1MA00 dmi.board.vendor: LENOVO dmi.board.version: SDK0E50510 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLEN
[Kernel-packages] [Bug 1788361] Re: [Lenovo laptop] Fail to completely boot with kernel 4.15.0-32-generic
I don't know what to do with this report, I have no right to close it. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1788361 Title: [Lenovo laptop] Fail to completely boot with kernel 4.15.0-32-generic Status in linux package in Ubuntu: Incomplete Bug description: Hi, my girlfriend was told yesterday it was time to upgrade from 16.04 to 18.04. Her computer is a Lenovo Ideapad 700-17ISK 80RV (Core i7 6700HQ with 16 GB RAM, a NVIDIA GeForce 940M embedded graphic card and a Samsung SSD 830). The upgrade process ran fluently but the disaster came after : the laptop is unable to complete boot process. There is no more graphical login screen. I searched a bit and found various tips, mainly recommanding to disable Wayland (https://www.reddit.com/r/Ubuntu/comments/8fu6oq/1804_is_not_booting_up_its_stuck_in_splash_screen/) but it does not work for me. I tried the recovery mode, and I can confirm that using directly the resume option conveniently leads to a graphical login screen. Odd thing : I have twice the recovery menu (and I need to validate twice the resume entry to complete the startup process). I also tried other kernels (4.15.0-30, -29, -24 and -23 versions), that fluently leads to the graphical login screen, but completely lacks basic modules for networking (no r8169 nor iwlmvm modules, thus making the computer completely unusable). There are also other problems, which are perhaps not related to the Linux kernel / package. For example : - the keyboard shortcuts for adjusting brightness are not functional with any of the kernel I tried, 4.15.0-32-generic included ; - there is no simple way to suspend the computer (no option directly reachable - ergonomic fail - and closing the screen only make the screen black) and when configuring the power button action to suspend the computer, there is no way to recover (the screen remains black - no more pm-suspend command available but systemctl suspend ends the same way). A hard poweroff is needed (several seconds pressing the poweroff button). Here is the output of the lspci command : 00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07) 00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07) 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06) 00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31) 00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31) 00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31) 00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31) 00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1) 00:1c.5 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #6 (rev f1) 00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO UART #0 (rev 31) 00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31) 00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31) 00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31) 00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31) 01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 940M] (rev a2) 02:00.0 Network controller: Intel Corporation Dual Band Wireless-AC 3165 Plus Bluetooth (rev 99) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Version : Ubuntu 4.15.0-32.35-generic 4.15.18 Linux chani-lenovo-i7 4.15.0-32-generic #35-Ubuntu SMP Fri Aug 10 17:58:07 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux Please help, this is a very unfriendly situation, and very surprising with a computer not so old and with no bleeding edge components. Thanks in advance & best regards, Al. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788361/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1788361] Re: [Lenovo laptop] Fail to completely boot with kernel 4.15.0-32-generic
After all, it seems that my problems entirely came from the nvidia packages (proprietary driver) that was left broken by the 16.04 to 18.04 update process. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1788361 Title: [Lenovo laptop] Fail to completely boot with kernel 4.15.0-32-generic Status in linux package in Ubuntu: Incomplete Bug description: Hi, my girlfriend was told yesterday it was time to upgrade from 16.04 to 18.04. Her computer is a Lenovo Ideapad 700-17ISK 80RV (Core i7 6700HQ with 16 GB RAM, a NVIDIA GeForce 940M embedded graphic card and a Samsung SSD 830). The upgrade process ran fluently but the disaster came after : the laptop is unable to complete boot process. There is no more graphical login screen. I searched a bit and found various tips, mainly recommanding to disable Wayland (https://www.reddit.com/r/Ubuntu/comments/8fu6oq/1804_is_not_booting_up_its_stuck_in_splash_screen/) but it does not work for me. I tried the recovery mode, and I can confirm that using directly the resume option conveniently leads to a graphical login screen. Odd thing : I have twice the recovery menu (and I need to validate twice the resume entry to complete the startup process). I also tried other kernels (4.15.0-30, -29, -24 and -23 versions), that fluently leads to the graphical login screen, but completely lacks basic modules for networking (no r8169 nor iwlmvm modules, thus making the computer completely unusable). There are also other problems, which are perhaps not related to the Linux kernel / package. For example : - the keyboard shortcuts for adjusting brightness are not functional with any of the kernel I tried, 4.15.0-32-generic included ; - there is no simple way to suspend the computer (no option directly reachable - ergonomic fail - and closing the screen only make the screen black) and when configuring the power button action to suspend the computer, there is no way to recover (the screen remains black - no more pm-suspend command available but systemctl suspend ends the same way). A hard poweroff is needed (several seconds pressing the poweroff button). Here is the output of the lspci command : 00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07) 00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07) 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06) 00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31) 00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31) 00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31) 00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31) 00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1) 00:1c.5 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #6 (rev f1) 00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO UART #0 (rev 31) 00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31) 00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31) 00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31) 00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31) 01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 940M] (rev a2) 02:00.0 Network controller: Intel Corporation Dual Band Wireless-AC 3165 Plus Bluetooth (rev 99) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Version : Ubuntu 4.15.0-32.35-generic 4.15.18 Linux chani-lenovo-i7 4.15.0-32-generic #35-Ubuntu SMP Fri Aug 10 17:58:07 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux Please help, this is a very unfriendly situation, and very surprising with a computer not so old and with no bleeding edge components. Thanks in advance & best regards, Al. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788361/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1788361] Re: [Lenovo laptop] Fail to completely boot with kernel 4.15.0-32-generic
Hey, Ubuntu Team bot, your apport-collect 1788361 command does not work. After logging in Launchpad from a terminal browser (probably Lynx), I got this message : No REFERER Header Launchpad requires a REFERER header to perform this action. There is no REFERER header present. This can be caused by configuring your browser to block REFERER headers. Unblock REFERER headers for launchpad.net and try again, or see the FAQ Why does Launchpad require a REFERER header? for more information. ... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1788361 Title: [Lenovo laptop] Fail to completely boot with kernel 4.15.0-32-generic Status in linux package in Ubuntu: Incomplete Bug description: Hi, my girlfriend was told yesterday it was time to upgrade from 16.04 to 18.04. Her computer is a Lenovo Ideapad 700-17ISK 80RV (Core i7 6700HQ with 16 GB RAM, a NVIDIA GeForce 940M embedded graphic card and a Samsung SSD 830). The upgrade process ran fluently but the disaster came after : the laptop is unable to complete boot process. There is no more graphical login screen. I searched a bit and found various tips, mainly recommanding to disable Wayland (https://www.reddit.com/r/Ubuntu/comments/8fu6oq/1804_is_not_booting_up_its_stuck_in_splash_screen/) but it does not work for me. I tried the recovery mode, and I can confirm that using directly the resume option conveniently leads to a graphical login screen. Odd thing : I have twice the recovery menu (and I need to validate twice the resume entry to complete the startup process). I also tried other kernels (4.15.0-30, -29, -24 and -23 versions), that fluently leads to the graphical login screen, but completely lacks basic modules for networking (no r8169 nor iwlmvm modules, thus making the computer completely unusable). There are also other problems, which are perhaps not related to the Linux kernel / package. For example : - the keyboard shortcuts for adjusting brightness are not functional with any of the kernel I tried, 4.15.0-32-generic included ; - there is no simple way to suspend the computer (no option directly reachable - ergonomic fail - and closing the screen only make the screen black) and when configuring the power button action to suspend the computer, there is no way to recover (the screen remains black - no more pm-suspend command available but systemctl suspend ends the same way). A hard poweroff is needed (several seconds pressing the poweroff button). Here is the output of the lspci command : 00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07) 00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07) 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06) 00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31) 00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31) 00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31) 00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31) 00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1) 00:1c.5 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #6 (rev f1) 00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO UART #0 (rev 31) 00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31) 00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31) 00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31) 00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31) 01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 940M] (rev a2) 02:00.0 Network controller: Intel Corporation Dual Band Wireless-AC 3165 Plus Bluetooth (rev 99) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Version : Ubuntu 4.15.0-32.35-generic 4.15.18 Linux chani-lenovo-i7 4.15.0-32-generic #35-Ubuntu SMP Fri Aug 10 17:58:07 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux Please help, this is a very unfriendly situation, and very surprising with a computer not so old and with no bleeding edge components. Thanks in advance & best regards, Al. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788361/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1788361] Re: [Lenovo laptop] Fail to completely boot with kernel 4.15.0-32-generic
The machine perfectly boots up with gdm3 and Wayland after removing the broken nvidia packages. I will now try to reinstall these packages... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1788361 Title: [Lenovo laptop] Fail to completely boot with kernel 4.15.0-32-generic Status in linux package in Ubuntu: Incomplete Bug description: Hi, my girlfriend was told yesterday it was time to upgrade from 16.04 to 18.04. Her computer is a Lenovo Ideapad 700-17ISK 80RV (Core i7 6700HQ with 16 GB RAM, a NVIDIA GeForce 940M embedded graphic card and a Samsung SSD 830). The upgrade process ran fluently but the disaster came after : the laptop is unable to complete boot process. There is no more graphical login screen. I searched a bit and found various tips, mainly recommanding to disable Wayland (https://www.reddit.com/r/Ubuntu/comments/8fu6oq/1804_is_not_booting_up_its_stuck_in_splash_screen/) but it does not work for me. I tried the recovery mode, and I can confirm that using directly the resume option conveniently leads to a graphical login screen. Odd thing : I have twice the recovery menu (and I need to validate twice the resume entry to complete the startup process). I also tried other kernels (4.15.0-30, -29, -24 and -23 versions), that fluently leads to the graphical login screen, but completely lacks basic modules for networking (no r8169 nor iwlmvm modules, thus making the computer completely unusable). There are also other problems, which are perhaps not related to the Linux kernel / package. For example : - the keyboard shortcuts for adjusting brightness are not functional with any of the kernel I tried, 4.15.0-32-generic included ; - there is no simple way to suspend the computer (no option directly reachable - ergonomic fail - and closing the screen only make the screen black) and when configuring the power button action to suspend the computer, there is no way to recover (the screen remains black - no more pm-suspend command available but systemctl suspend ends the same way). A hard poweroff is needed (several seconds pressing the poweroff button). Here is the output of the lspci command : 00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07) 00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07) 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06) 00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31) 00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31) 00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31) 00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31) 00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1) 00:1c.5 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #6 (rev f1) 00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO UART #0 (rev 31) 00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31) 00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31) 00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31) 00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31) 01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 940M] (rev a2) 02:00.0 Network controller: Intel Corporation Dual Band Wireless-AC 3165 Plus Bluetooth (rev 99) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Version : Ubuntu 4.15.0-32.35-generic 4.15.18 Linux chani-lenovo-i7 4.15.0-32-generic #35-Ubuntu SMP Fri Aug 10 17:58:07 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux Please help, this is a very unfriendly situation, and very surprising with a computer not so old and with no bleeding edge components. Thanks in advance & best regards, Al. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788361/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1788361] Re: [Lenovo laptop] Fail to completely boot with kernel 4.15.0-32-generic
Okay Ubuntu Team bot, but I'ver realized that the nvidia packages were silently left broken by your update process (not fair !). When suppressing these packages, re-deactivating Wayland and moving from gdm3 to lightdm, I finally got a working machine. Will now try to go back to Wayland and gdm3 to determine where is exactly the bug. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1788361 Title: [Lenovo laptop] Fail to completely boot with kernel 4.15.0-32-generic Status in linux package in Ubuntu: Incomplete Bug description: Hi, my girlfriend was told yesterday it was time to upgrade from 16.04 to 18.04. Her computer is a Lenovo Ideapad 700-17ISK 80RV (Core i7 6700HQ with 16 GB RAM, a NVIDIA GeForce 940M embedded graphic card and a Samsung SSD 830). The upgrade process ran fluently but the disaster came after : the laptop is unable to complete boot process. There is no more graphical login screen. I searched a bit and found various tips, mainly recommanding to disable Wayland (https://www.reddit.com/r/Ubuntu/comments/8fu6oq/1804_is_not_booting_up_its_stuck_in_splash_screen/) but it does not work for me. I tried the recovery mode, and I can confirm that using directly the resume option conveniently leads to a graphical login screen. Odd thing : I have twice the recovery menu (and I need to validate twice the resume entry to complete the startup process). I also tried other kernels (4.15.0-30, -29, -24 and -23 versions), that fluently leads to the graphical login screen, but completely lacks basic modules for networking (no r8169 nor iwlmvm modules, thus making the computer completely unusable). There are also other problems, which are perhaps not related to the Linux kernel / package. For example : - the keyboard shortcuts for adjusting brightness are not functional with any of the kernel I tried, 4.15.0-32-generic included ; - there is no simple way to suspend the computer (no option directly reachable - ergonomic fail - and closing the screen only make the screen black) and when configuring the power button action to suspend the computer, there is no way to recover (the screen remains black - no more pm-suspend command available but systemctl suspend ends the same way). A hard poweroff is needed (several seconds pressing the poweroff button). Here is the output of the lspci command : 00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07) 00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07) 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06) 00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31) 00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31) 00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31) 00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31) 00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1) 00:1c.5 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #6 (rev f1) 00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO UART #0 (rev 31) 00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31) 00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31) 00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31) 00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31) 01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 940M] (rev a2) 02:00.0 Network controller: Intel Corporation Dual Band Wireless-AC 3165 Plus Bluetooth (rev 99) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Version : Ubuntu 4.15.0-32.35-generic 4.15.18 Linux chani-lenovo-i7 4.15.0-32-generic #35-Ubuntu SMP Fri Aug 10 17:58:07 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux Please help, this is a very unfriendly situation, and very surprising with a computer not so old and with no bleeding edge components. Thanks in advance & best regards, Al. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788361/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1788361] Re: [Lenovo laptop] Fail to completely boot with kernel 4.15.0-32-generic
** Description changed: Hi, my girlfriend was told yesterday it was time to upgrade from 16.04 to 18.04. Her computer is a Lenovo Ideapad 700-17ISK 80RV (Core i7 6700HQ with 16 GB RAM, a NVIDIA GeForce 940M embedded graphic card and a Samsung SSD 830). The upgrade process ran fluently but the disaster came after : the laptop is unable to complete boot process. There is no more graphical login screen. I searched a bit and found various tips, mainly recommanding to disable Wayland (https://www.reddit.com/r/Ubuntu/comments/8fu6oq/1804_is_not_booting_up_its_stuck_in_splash_screen/) but it does not work for me. I tried the recovery mode, and I can confirm that using directly the resume option conveniently leads to a graphical login screen. Odd thing : I have twice the recovery menu (and I need to validate twice the resume entry to complete the startup process). I also tried other kernels (4.15.0-30, -29, -24 and -23 versions), that fluently leads to the graphical login screen, but completely lacks basic modules for networking (no r8169 nor iwlmvm modules, thus making the computer completely unusable). There are also other problems, which are perhaps not related to the Linux kernel / package. For example : - the keyboard shortcuts for adjusting brightness are not functional with any of the kernel I tried, 4.15.0-32-generic included ; - - there is no simple way to suspend the computer (no option directly reachable - ergonomic fail - and closing the screen only make the screen black ; no more pm-suspend command available) and when configuring the power button action to suspend the computer, there is no way to recover (the screen remains black). A hard poweroff is needed (several seconds pressing the poweroff button). + - there is no simple way to suspend the computer (no option directly reachable - ergonomic fail - and closing the screen only make the screen black) and when configuring the power button action to suspend the computer, there is no way to recover (the screen remains black - no more pm-suspend command available but systemctl suspend ends the same way). A hard poweroff is needed (several seconds pressing the poweroff button). Here is the output of the lspci command : 00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07) 00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07) 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06) 00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31) 00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31) 00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31) 00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31) 00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1) 00:1c.5 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #6 (rev f1) 00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO UART #0 (rev 31) 00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31) 00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31) 00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31) 00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31) 01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 940M] (rev a2) 02:00.0 Network controller: Intel Corporation Dual Band Wireless-AC 3165 Plus Bluetooth (rev 99) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Version : Ubuntu 4.15.0-32.35-generic 4.15.18 Linux chani-lenovo-i7 4.15.0-32-generic #35-Ubuntu SMP Fri Aug 10 17:58:07 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux Please help, this is a very unfriendly situation, and very surprising with a computer not so old and with no bleeding edge components. Thanks in advance & best regards, Al. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1788361 Title: [Lenovo laptop] Fail to completely boot with kernel 4.15.0-32-generic Status in linux package in Ubuntu: New Bug description: Hi, my girlfriend was told yesterday it was time to upgrade from 16.04 to 18.04. Her computer is a Lenovo Ideapad 700-17ISK 80RV (Core i7 6700HQ with 16 GB RAM, a NVIDIA GeForce 940M embedded graphic card and a Samsung SSD 830). The upgrade process ran fluently but the disaster came after : the laptop is unable to complete boot process. There is no more graphical login screen. I searched a bit and found various tips, mainly recommanding to disable Wayland (https://www.reddit.com/r/Ubuntu/comments/8fu6oq/1804
[Kernel-packages] [Bug 1788361] [NEW] [Lenovo laptop] Fail to completely boot with kernel 4.15.0-32-generic
Public bug reported: Hi, my girlfriend was told yesterday it was time to upgrade from 16.04 to 18.04. Her computer is a Lenovo Ideapad 700-17ISK 80RV (Core i7 6700HQ with 16 GB RAM, a NVIDIA GeForce 940M embedded graphic card and a Samsung SSD 830). The upgrade process ran fluently but the disaster came after : the laptop is unable to complete boot process. There is no more graphical login screen. I searched a bit and found various tips, mainly recommanding to disable Wayland (https://www.reddit.com/r/Ubuntu/comments/8fu6oq/1804_is_not_booting_up_its_stuck_in_splash_screen/) but it does not work for me. I tried the recovery mode, and I can confirm that using directly the resume option conveniently leads to a graphical login screen. Odd thing : I have twice the recovery menu (and I need to validate twice the resume entry to complete the startup process). I also tried other kernels (4.15.0-30, -29, -24 and -23 versions), that fluently leads to the graphical login screen, but completely lacks basic modules for networking (no r8169 nor iwlmvm modules, thus making the computer completely unusable). There are also other problems, which are perhaps not related to the Linux kernel / package. For example : - the keyboard shortcuts for adjusting brightness are not functional with any of the kernel I tried, 4.15.0-32-generic included ; - there is no simple way to suspend the computer (no option directly reachable - ergonomic fail - and closing the screen only make the screen black ; no more pm-suspend command available) and when configuring the power button action to suspend the computer, there is no way to recover (the screen remains black). A hard poweroff is needed (several seconds pressing the poweroff button). Here is the output of the lspci command : 00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07) 00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07) 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06) 00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31) 00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31) 00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31) 00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31) 00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1) 00:1c.5 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #6 (rev f1) 00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO UART #0 (rev 31) 00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31) 00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31) 00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31) 00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31) 01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 940M] (rev a2) 02:00.0 Network controller: Intel Corporation Dual Band Wireless-AC 3165 Plus Bluetooth (rev 99) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Version : Ubuntu 4.15.0-32.35-generic 4.15.18 Linux chani-lenovo-i7 4.15.0-32-generic #35-Ubuntu SMP Fri Aug 10 17:58:07 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux Please help, this is a very unfriendly situation, and very surprising with a computer not so old and with no bleeding edge components. Thanks in advance & best regards, Al. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Description changed: Hi, my girlfriend was told yesterday it was time to upgrade from 16.04 to 18.04. Her computer is a Lenovo Ideapad 700-17ISK 80RV (Core i7 6700HQ with 16 GB RAM and a Samsung SSD 830). The upgrade process ran fluently but the disaster came after : the laptop is unable to complete boot process. There is no more graphical login screen. I searched a bit and found various tips, mainly recommanding to disable Wayland (https://www.reddit.com/r/Ubuntu/comments/8fu6oq/1804_is_not_booting_up_its_stuck_in_splash_screen/) but it does not work for me. I tried the recovery mode, and I can confirm that using directly the resume option conveniently leads to a graphical login screen. Odd thing : I have twice the recovery menu (and I need to validate twice the resume entry to complete the startup process). I also tried other kernels (4.15.0-30, -29, -24 and -23 versions), that fluently leads to the graphical login screen, but completely lacks basic modules for networking (no r8169 nor iwlmvm modules, thus making the computer completely unusable). There are also other problems, which are perhaps not related to the Linux kernel / package. For example : - - the keyboard shortcuts for adjusting brightness are also not functional with
[Kernel-packages] [Bug 1439361] Re: USB to Ethernet adapter not working on USB 3 port but OK on USB 2 port
The package linux-image-extra-3.13.0-48-generic may also be concerned, I'm sot sure... ** Package changed: ubuntu => linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1439361 Title: USB to Ethernet adapter not working on USB 3 port but OK on USB 2 port Status in linux package in Ubuntu: New Bug description: Hello, my new laptop is a Dell XPS 11, with no ethernet port. So I bought an USB to Ethernet adapter. It also has two more USB 3 ports. When connected on my laptop, I'm unable to acquire an IP through my DHCP, but a new network interface is automatically raised. I tried to set manually an IP, but I cannot ping any system which normally honors ping requests. The surprising point is that when I connect the same adapter on an old laptop (Dell E4300), running the same version of Ubuntu 14.04 (both systems are fully up-to-date), it perfectly works ! The only difference I can see is that my old laptop has only USB 2 ports... Additionally, the USB hub works on both computers, and I connected the adapter to 2 desktop computers : - one with an additional USB 3 card : it works ; - one with embedded USB 3 port : same error as with the modern laptop. So it really seems to be a problem related to the way USB 3 is handled by Ubuntu 14.04, but perhaps only with some specific chipsets. I cannot find what chipset is on the mainboard of my laptop (it is an Intel one, for sure, since the CPU is a Core i5-4210Y), but my desktop PC as an Intel Z97 chipset. Here is what I read tailing kern.log when connecting the adapter. Note the errors near the end : Apr 1 21:00:57 XPS11 kernel: [ 1360.356635] usb 2-1: new high-speed USB device number 5 using xhci_hcd Apr 1 21:00:57 XPS11 kernel: [ 1360.385156] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610 Apr 1 21:00:57 XPS11 kernel: [ 1360.385165] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Apr 1 21:00:57 XPS11 kernel: [ 1360.385170] usb 2-1: Product: USB2.0 Hub Apr 1 21:00:57 XPS11 kernel: [ 1360.385174] usb 2-1: Manufacturer: GenesysLogic Apr 1 21:00:57 XPS11 kernel: [ 1360.386453] hub 2-1:1.0: USB hub found Apr 1 21:00:57 XPS11 kernel: [ 1360.387717] hub 2-1:1.0: 4 ports detected Apr 1 21:00:57 XPS11 kernel: [ 1360.508766] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd Apr 1 21:00:57 XPS11 kernel: [ 1360.528979] usb 3-1: New USB device found, idVendor=05e3, idProduct=0616 Apr 1 21:00:57 XPS11 kernel: [ 1360.528993] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Apr 1 21:00:57 XPS11 kernel: [ 1360.528999] usb 3-1: Product: USB3.0 Hub Apr 1 21:00:57 XPS11 kernel: [ 1360.529005] usb 3-1: Manufacturer: GenesysLogic Apr 1 21:00:57 XPS11 kernel: [ 1360.532085] hub 3-1:1.0: USB hub found Apr 1 21:00:57 XPS11 kernel: [ 1360.532498] hub 3-1:1.0: 4 ports detected Apr 1 21:00:58 XPS11 kernel: [ 1360.805848] usb 3-1.1: new SuperSpeed USB device number 3 using xhci_hcd Apr 1 21:00:58 XPS11 kernel: [ 1360.821076] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 Apr 1 21:00:58 XPS11 kernel: [ 1360.821088] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 Apr 1 21:00:58 XPS11 kernel: [ 1360.821094] usb 3-1.1: Product: USB 10/100/1000 LAN Apr 1 21:00:58 XPS11 kernel: [ 1360.821099] usb 3-1.1: Manufacturer: Realtek Apr 1 21:00:58 XPS11 kernel: [ 1360.821104] usb 3-1.1: SerialNumber: 0100 Apr 1 21:01:03 XPS11 kernel: [ 1365.846558] usb 3-1.1: Disable of device-initiated U1 failed. Apr 1 21:01:03 XPS11 kernel: [ 1365.850638] usb 3-1.1: Disable of device-initiated U2 failed. Apr 1 21:01:03 XPS11 kernel: [ 1365.854180] usb 3-1.1: Set SEL for device-initiated U1 failed. Apr 1 21:01:03 XPS11 kernel: [ 1365.857613] usb 3-1.1: Set SEL for device-initiated U2 failed. Apr 1 21:01:03 XPS11 kernel: [ 1365.857682] usbcore: registered new interface driver cdc_ether Apr 1 21:01:03 XPS11 kernel: [ 1365.865825] xhci_hcd :00:14.0: URB transfer length is wrong, xHC issue? req. len = 0, act. len = 4294967288 Apr 1 21:01:03 XPS11 kernel: [ 1365.887328] usb 3-1.1: Set SEL for device-initiated U1 failed. Apr 1 21:01:03 XPS11 kernel: [ 1365.890841] usb 3-1.1: Set SEL for device-initiated U2 failed. Apr 1 21:01:03 XPS11 kernel: [ 1365.890862] r815x: probe of 3-1.1:2.0 failed with error -71 Apr 1 21:01:03 XPS11 kernel: [ 1365.890922] usbcore: registered new interface driver r815x uname -ar output : Linux XPS11 3.13.0-48-generic #80-Ubuntu SMP Thu Mar 12 11:16:15 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux On my old laptop, here is the kern.log relevant parts : Apr 1 21:24:13 stilgar-e4300 kernel: [11988.964194] usb 2-4: new high-speed USB device number 8 using ehci-pci Apr 1 21:24:13 stilgar-e4300 kernel: [11989.107799] us
