[Kernel-packages] [Bug 1911449] Re: Calibre fails on ubuntu 20.04
Here is for sudo lspci -vnvn > lspci-vnvn.log 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) Subsystem: Toshiba Corporation 3rd Gen Core processor DRAM Controller [1179:0001] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: ivb_uncore 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Toshiba Corporation 3rd Gen Core processor Graphics Controller [1179:0003] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s (downgraded), Width x1 (ok) TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState+ RootCap: CRSVisible- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootSta: PME ReqID , PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+, NROPrPrP-, LTR- 10BitTagComp-, 10BitTagReq-, OBFF Not Supported, ExtFmt-, EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS-, LN System CLS Not Supported, TPHComp-, ExtTPHComp-, ARIFwd- AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- AtomicOpsCtl: ReqEn- EgressBlck- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee04004 Data: 4021 Capabilities: [90] Subsystem: Toshiba Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 [1179:0001] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes
[Kernel-packages] [Bug 1911449] Re: Calibre fails on ubuntu 20.04
Ubuntu 5.4.0-56.62-generic 5.4.73 sudo lspci -vnvn > lspci-vnvn.log returns nothing ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1911449 Title: Calibre fails on ubuntu 20.04 Status in linux package in Ubuntu: Confirmed Bug description: Hi, On the repository server of Ubuntu / Xubuntu 20.04, the version of "Calibre" (to read ebooks) proposed is 4.99.4 but it doesn't launch. On Calibre website (https://calibre-ebook.com/download_linux), it's written : The latest release of calibre is 5.9.0. Please do not use your distribution provided calibre package, as those are often buggy/outdated. Instead use the Binary install described below. Could a more recent version of Calibre, which should work better, be proposed on the repository server ? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1911449/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1911449] [NEW] Calibre fails on ubuntu 20.04
Public bug reported: Hi, On the repository server of Ubuntu / Xubuntu 20.04, the version of "Calibre" (to read ebooks) proposed is 4.99.4 but it doesn't launch. On Calibre website (https://calibre-ebook.com/download_linux), it's written : The latest release of calibre is 5.9.0. Please do not use your distribution provided calibre package, as those are often buggy/outdated. Instead use the Binary install described below. Could a more recent version of Calibre, which should work better, be proposed on the repository server ? ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1911449 Title: Calibre fails on ubuntu 20.04 Status in linux package in Ubuntu: Confirmed Bug description: Hi, On the repository server of Ubuntu / Xubuntu 20.04, the version of "Calibre" (to read ebooks) proposed is 4.99.4 but it doesn't launch. On Calibre website (https://calibre-ebook.com/download_linux), it's written : The latest release of calibre is 5.9.0. Please do not use your distribution provided calibre package, as those are often buggy/outdated. Instead use the Binary install described below. Could a more recent version of Calibre, which should work better, be proposed on the repository server ? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1911449/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] acpidump.txt
apport information ** Attachment added: "acpidump.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450139/+files/acpidump.txt ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450136/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450138/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450137/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450134/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450132/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450135/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450133/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450126/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] Lspci-vt.txt
apport information ** Attachment added: "Lspci-vt.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450128/+files/Lspci-vt.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450125/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450129/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450124/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] Lsusb-t.txt
apport information ** Attachment added: "Lsusb-t.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450130/+files/Lsusb-t.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] Lsusb-v.txt
apport information ** Attachment added: "Lsusb-v.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450131/+files/Lsusb-v.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450127/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-59-generic N/A linux-backports-modules-5.4.0-59-generic N/A linux-firmware1.187.7 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: focal Uname: Linux 5.4.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/27/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0F3KHR dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 9010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1910527] Re: Cannot open URL in Evince (AppArmor issue ?)
apport information ** Tags added: apport-collected focal ** Description changed: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu27.14 + Architecture: amd64 + AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: + CasperMD5CheckResult: skip + CurrentDesktop: XFCE + DistroRelease: Ubuntu 20.04 + InstallationDate: Installed on 2020-06-17 (204 days ago) + InstallationMedia: + + MachineType: Dell Inc. OptiPlex 9010 + Package: linux (not installed) + ProcFB: 0 i915drmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 + ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 + PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. + RelatedPackageVersions: + linux-restricted-modules-5.4.0-59-generic N/A + linux-backports-modules-5.4.0-59-generic N/A + linux-firmware1.187.7 + RfKill: + 0: phy0: Wireless LAN + Soft blocked: no + Hard blocked: no + Tags: focal + Uname: Linux 5.4.0-59-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo + _MarkForUpload: True + dmi.bios.date: 03/27/2013 + dmi.bios.vendor: Dell Inc. + dmi.bios.version: A13 + dmi.board.name: 0F3KHR + dmi.board.vendor: Dell Inc. + dmi.board.version: A00 + dmi.chassis.type: 15 + dmi.chassis.vendor: Dell Inc. + dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/27/2013:svnDellInc.:pnOptiPlex9010:pvr01:rvnDellInc.:rn0F3KHR:rvrA00:cvnDellInc.:ct15:cvr: + dmi.product.name: OptiPlex 9010 + dmi.product.version: 01 + dmi.sys.vendor: Dell Inc. + modified.conffile..etc.default.apport: + # set this to 0 to disable apport, or to 1 to enable it + # you can temporarily override this with + # sudo service apport start force_start=1 + enabled=0 + mtime.conffile..etc.default.apport: 2020-06-17T14:44:33 ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1910527/+attachment/5450123/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Confirmed Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D3', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: XFCE DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-17 (204 days ago) InstallationMedia: MachineType: Dell Inc. OptiPlex 9010 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=4ebde411-6fd1-4a30-b880-a931cb3c9d0e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-59.65-generic 5.4.78 PulseList: Error: command
[Kernel-packages] [Bug 1910527] [NEW] Cannot open URL in Evince (AppArmor issue ?)
Public bug reported: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! ** Affects: linux (Ubuntu) Importance: Undecided Status: Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1910527 Title: Cannot open URL in Evince (AppArmor issue ?) Status in linux package in Ubuntu: Incomplete Bug description: Hello, In a pdf (created with Libre Office, URL checked and working), when I try to open a URL (including the one in "About Evince" to the Website), it doesn't work and the following message appears : Failed to launch preferred application for category WebBrowser. Failed to execute child process "/usr/lib/x86_64-linux-gnu/xfce4/exo-1/exo- helper-2" (Permission denied) I reported this bug to Evince (https://gitlab.gnome.org/GNOME/evince/-/issues/1539#note_999642) and someone told me : "The issue you describe is likely a constraint defined at the system level, for example, using AppArmor. The issue should be reported to the distribution." Xubuntu 20.04, evince 3.36.7 Have a nice day and thanks for your amazing job ! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1910527/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp