[Kernel-packages] [Bug 1313279] Re: xHCI host not responding to stop endpoint command
What are the ways to figure out if the symptoms I am seeing is because of this bug or something else? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1313279 Title: xHCI host not responding to stop endpoint command Status in Linux: Unknown Status in linux package in Ubuntu: Confirmed Bug description: Description: Ubuntu 14.04 LTS Release: 14.04 Hardware: Intel NUC D34010WYK (Core i3 4010U) Memory: 4 gigabytes USD device: PCTV 292e DVB-T tuner I have 2 PCTV 292e DVB-T tuners connected to the system. When I start to use either of the tuner, the xHCI host crashes. Since I'm booting from an USB disk. If I only connect 1 of the tuners, the system works ok. It does not matter which one of the tuners I connect. [ 68.990396] xhci_hcd :00:14.0: xHCI host not responding to stop endpoint command. [ 68.990402] xhci_hcd :00:14.0: Assuming host is dying, halting host. Sometimes this also leads to this: [ 638.183002] IP: [] usb_enable_link_state+0x2d/0x2f0 [ 638.183057] PGD 0 [ 638.183077] Oops: [#1] SMP I can also observe the same fault with OpenELEC Linux distribution that runs kernel 3.14 when I run the system from an internal SATA SSD drive (not from an external USB disk). lsusb -v: http://paste.ubuntu.com/7343384/ dmesg: http://sprunge.us/HMXH dmesg (crash type 2): http://sprunge.us/PSiX ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: lubuntu-desktop 0.55 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 Date: Sun Apr 27 11:12:22 2014 InstallationDate: Installed on 2014-04-07 (19 days ago) InstallationMedia: Lubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) SourcePackage: lubuntu-meta UpgradeStatus: Upgraded to trusty on 2014-04-26 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1313279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1313279] Re: xHCI host not responding to stop endpoint command
Output of lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description:Ubuntu 14.04.5 LTS Release:14.04 Codename: trusty output of uname -a Linux 4.4.0-127-lowlatency #153~14.04.1-Ubuntu SMP PREEMPT Sat May 19 15:05:22 UTC 2018 x86_64 x86_64 x8 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1313279 Title: xHCI host not responding to stop endpoint command Status in Linux: Unknown Status in linux package in Ubuntu: Confirmed Bug description: Description: Ubuntu 14.04 LTS Release: 14.04 Hardware: Intel NUC D34010WYK (Core i3 4010U) Memory: 4 gigabytes USD device: PCTV 292e DVB-T tuner I have 2 PCTV 292e DVB-T tuners connected to the system. When I start to use either of the tuner, the xHCI host crashes. Since I'm booting from an USB disk. If I only connect 1 of the tuners, the system works ok. It does not matter which one of the tuners I connect. [ 68.990396] xhci_hcd :00:14.0: xHCI host not responding to stop endpoint command. [ 68.990402] xhci_hcd :00:14.0: Assuming host is dying, halting host. Sometimes this also leads to this: [ 638.183002] IP: [] usb_enable_link_state+0x2d/0x2f0 [ 638.183057] PGD 0 [ 638.183077] Oops: [#1] SMP I can also observe the same fault with OpenELEC Linux distribution that runs kernel 3.14 when I run the system from an internal SATA SSD drive (not from an external USB disk). lsusb -v: http://paste.ubuntu.com/7343384/ dmesg: http://sprunge.us/HMXH dmesg (crash type 2): http://sprunge.us/PSiX ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: lubuntu-desktop 0.55 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 Date: Sun Apr 27 11:12:22 2014 InstallationDate: Installed on 2014-04-07 (19 days ago) InstallationMedia: Lubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) SourcePackage: lubuntu-meta UpgradeStatus: Upgraded to trusty on 2014-04-26 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1313279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1313279] Re: xHCI host not responding to stop endpoint command
I am using kernel 4.4.0-127-lowlatency (Ubuntu 14.04) and I have this bug. When we run an UVC camera, the host controller dies randomly after some point. The symptoms are exactly as described by other users above. I would like to know which kernels this bug affects and where a patch has been applied. The link below describes a fix but I couldn't figure out which kernel it has been applied to. May I know which kernel fixes it? https://www.spinics.net/lists/linux-usb/msg122678.html Hardware: Asus X99-E-10G WS Motherboard Intel Xeon E5-2687W v4 3.0 GHz -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1313279 Title: xHCI host not responding to stop endpoint command Status in Linux: Unknown Status in linux package in Ubuntu: Confirmed Bug description: Description: Ubuntu 14.04 LTS Release: 14.04 Hardware: Intel NUC D34010WYK (Core i3 4010U) Memory: 4 gigabytes USD device: PCTV 292e DVB-T tuner I have 2 PCTV 292e DVB-T tuners connected to the system. When I start to use either of the tuner, the xHCI host crashes. Since I'm booting from an USB disk. If I only connect 1 of the tuners, the system works ok. It does not matter which one of the tuners I connect. [ 68.990396] xhci_hcd :00:14.0: xHCI host not responding to stop endpoint command. [ 68.990402] xhci_hcd :00:14.0: Assuming host is dying, halting host. Sometimes this also leads to this: [ 638.183002] IP: [] usb_enable_link_state+0x2d/0x2f0 [ 638.183057] PGD 0 [ 638.183077] Oops: [#1] SMP I can also observe the same fault with OpenELEC Linux distribution that runs kernel 3.14 when I run the system from an internal SATA SSD drive (not from an external USB disk). lsusb -v: http://paste.ubuntu.com/7343384/ dmesg: http://sprunge.us/HMXH dmesg (crash type 2): http://sprunge.us/PSiX ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: lubuntu-desktop 0.55 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 Date: Sun Apr 27 11:12:22 2014 InstallationDate: Installed on 2014-04-07 (19 days ago) InstallationMedia: Lubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) SourcePackage: lubuntu-meta UpgradeStatus: Upgraded to trusty on 2014-04-26 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1313279/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
