[Kernel-packages] [Bug 1671360] Re: System doesn't boot properly on Gigabyte AM4 motherboards (AMD Ryzen)
Make sure you leave a review for your MB. I've already done that on Amazon UK. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1671360 Title: System doesn't boot properly on Gigabyte AM4 motherboards (AMD Ryzen) Status in Linux: Unknown Status in linux package in Ubuntu: Confirmed Bug description: I'm trying to run ubuntu on Ryzen 1700x with Gigabyte GA-AB350-gaming-3 motherboard, and it has a load of problems, starting with not being able to boot normally. During normal boot, on 16.10 as well as 17.04 beta: system doesn't boot normally, hangs with a lot of "unexpected irq trap at vector 07" messages displayed. Following advice from various places, I've tried:disable cpu freq governor and cpu handling in acpi settings 1. add "acpi=off" to boot params That helps, allowing me to boot into recovery mode, though it leaves me with system seeing only one core, is really slow and still only boots in recovery mode. 2. Compile own kernel using 4.11.rc1 and disabling cpu freq governor and cpu handling in acpi settings. Boot with "quiet loglevel=3" option. That gets me even further - system sees all cores now. Still only recovery mode though, but its enough to get info for this bug report. Some observed problems: 1. dmesg reports *a lot* of messages like this all the time: [ 163.362068] ->handle_irq(): 87a7e090, [ 163.362081] bad_chained_irq+0x0/0x40 [ 163.362089] ->handle_irq(): 87a7e090, [ 163.362090] amd_gpio_irq_handler+0x0/0x200 [ 163.362090] ->irq_data.chip(): 88587e20, [ 163.362090] ioapic_ir_chip+0x0/0x120 [ 163.362090] ->action(): 884601c0 [ 163.362091]IRQ_NOPROBE set [ 163.362099] ->handle_irq(): 87a7e090, [ 163.362099] amd_gpio_irq_handler+0x0/0x200 [ 163.362100] ->irq_data.chip(): 88587e20, [ 163.362100] ioapic_ir_chip+0x0/0x120 [ 163.362101] ->action(): 884601c0 I've tried to redirect dmesg to a file, stopped after a short while, it generated 400M of those. 2. Systemd cannot start journald. Perhaps because it cannot cope with amount of kernel logs? 3. Looking at pci, I've noticed something called AMDI0040 (/sys/bus/acpi/devices/AMDI0040, path=_SB_.EMMC), among AMDI0010, AMDI0020, AMDI0030. Those however are mentioned in kernel source, kernel and google are completely silent about AMDI0040. Phoronix tested ryzen using different motherboard, and it worked better (though not well), so I suspect it is an issue with motherboard. --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 DistroRelease: Ubuntu 17.04 InstallationDate: Installed on 2015-08-06 (581 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150728.1) Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash Tags: zesty Uname: Linux 4.11.0-rc1-custom x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to zesty on 2017-03-03 (6 days ago) UserGroups: _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1671360/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1671360] Re: System doesn't boot properly on Gigabyte AM4 motherboards (AMD Ryzen)
Just got this from Gigabyte Support: "Hello, Sorry but Gigabyte do not guarantee Linux Platform on the desktop motherboard. It support for Windows 10/7." Extremely helpful :/ In the meantime, I booted the Kubuntu install ISO with acpi=off setting. The same option was required for the first boot after install. Kernel version 4.10.0-21 compiled by kaihengfeng on http://people.canonical.com/~khfeng/lp1671360-2/ seems to work fine, the only thing to report is a long boot time. Thanks Kai-Heng Feng! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1671360 Title: System doesn't boot properly on Gigabyte AM4 motherboards (AMD Ryzen) Status in linux package in Ubuntu: Confirmed Bug description: I'm trying to run ubuntu on Ryzen 1700x with Gigabyte GA-AB350-gaming-3 motherboard, and it has a load of problems, starting with not being able to boot normally. During normal boot, on 16.10 as well as 17.04 beta: system doesn't boot normally, hangs with a lot of "unexpected irq trap at vector 07" messages displayed. Following advice from various places, I've tried:disable cpu freq governor and cpu handling in acpi settings 1. add "acpi=off" to boot params That helps, allowing me to boot into recovery mode, though it leaves me with system seeing only one core, is really slow and still only boots in recovery mode. 2. Compile own kernel using 4.11.rc1 and disabling cpu freq governor and cpu handling in acpi settings. Boot with "quiet loglevel=3" option. That gets me even further - system sees all cores now. Still only recovery mode though, but its enough to get info for this bug report. Some observed problems: 1. dmesg reports *a lot* of messages like this all the time: [ 163.362068] ->handle_irq(): 87a7e090, [ 163.362081] bad_chained_irq+0x0/0x40 [ 163.362089] ->handle_irq(): 87a7e090, [ 163.362090] amd_gpio_irq_handler+0x0/0x200 [ 163.362090] ->irq_data.chip(): 88587e20, [ 163.362090] ioapic_ir_chip+0x0/0x120 [ 163.362090] ->action(): 884601c0 [ 163.362091]IRQ_NOPROBE set [ 163.362099] ->handle_irq(): 87a7e090, [ 163.362099] amd_gpio_irq_handler+0x0/0x200 [ 163.362100] ->irq_data.chip(): 88587e20, [ 163.362100] ioapic_ir_chip+0x0/0x120 [ 163.362101] ->action(): 884601c0 I've tried to redirect dmesg to a file, stopped after a short while, it generated 400M of those. 2. Systemd cannot start journald. Perhaps because it cannot cope with amount of kernel logs? 3. Looking at pci, I've noticed something called AMDI0040 (/sys/bus/acpi/devices/AMDI0040, path=_SB_.EMMC), among AMDI0010, AMDI0020, AMDI0030. Those however are mentioned in kernel source, kernel and google are completely silent about AMDI0040. Phoronix tested ryzen using different motherboard, and it worked better (though not well), so I suspect it is an issue with motherboard. --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 DistroRelease: Ubuntu 17.04 InstallationDate: Installed on 2015-08-06 (581 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150728.1) Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash Tags: zesty Uname: Linux 4.11.0-rc1-custom x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to zesty on 2017-03-03 (6 days ago) UserGroups: _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1671360/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1671360] Re: System doesn't boot properly on Gigabyte AM4 motherboards (AMD Ryzen)
Submitted a request with Gigabyte support just now. Can't believe this has been dragging on for two months. Who would have thought to check whether the chosen motherboard even boots up with the latest OS prior to purchasing :\ Extremely frustrating. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1671360 Title: System doesn't boot properly on Gigabyte AM4 motherboards (AMD Ryzen) Status in linux package in Ubuntu: Confirmed Bug description: I'm trying to run ubuntu on Ryzen 1700x with Gigabyte GA-AB350-gaming-3 motherboard, and it has a load of problems, starting with not being able to boot normally. During normal boot, on 16.10 as well as 17.04 beta: system doesn't boot normally, hangs with a lot of "unexpected irq trap at vector 07" messages displayed. Following advice from various places, I've tried:disable cpu freq governor and cpu handling in acpi settings 1. add "acpi=off" to boot params That helps, allowing me to boot into recovery mode, though it leaves me with system seeing only one core, is really slow and still only boots in recovery mode. 2. Compile own kernel using 4.11.rc1 and disabling cpu freq governor and cpu handling in acpi settings. Boot with "quiet loglevel=3" option. That gets me even further - system sees all cores now. Still only recovery mode though, but its enough to get info for this bug report. Some observed problems: 1. dmesg reports *a lot* of messages like this all the time: [ 163.362068] ->handle_irq(): 87a7e090, [ 163.362081] bad_chained_irq+0x0/0x40 [ 163.362089] ->handle_irq(): 87a7e090, [ 163.362090] amd_gpio_irq_handler+0x0/0x200 [ 163.362090] ->irq_data.chip(): 88587e20, [ 163.362090] ioapic_ir_chip+0x0/0x120 [ 163.362090] ->action(): 884601c0 [ 163.362091]IRQ_NOPROBE set [ 163.362099] ->handle_irq(): 87a7e090, [ 163.362099] amd_gpio_irq_handler+0x0/0x200 [ 163.362100] ->irq_data.chip(): 88587e20, [ 163.362100] ioapic_ir_chip+0x0/0x120 [ 163.362101] ->action(): 884601c0 I've tried to redirect dmesg to a file, stopped after a short while, it generated 400M of those. 2. Systemd cannot start journald. Perhaps because it cannot cope with amount of kernel logs? 3. Looking at pci, I've noticed something called AMDI0040 (/sys/bus/acpi/devices/AMDI0040, path=_SB_.EMMC), among AMDI0010, AMDI0020, AMDI0030. Those however are mentioned in kernel source, kernel and google are completely silent about AMDI0040. Phoronix tested ryzen using different motherboard, and it worked better (though not well), so I suspect it is an issue with motherboard. --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 DistroRelease: Ubuntu 17.04 InstallationDate: Installed on 2015-08-06 (581 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150728.1) Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash Tags: zesty Uname: Linux 4.11.0-rc1-custom x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to zesty on 2017-03-03 (6 days ago) UserGroups: _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1671360/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1671360] Re: System doesn't boot properly on Gigabyte AM4 motherboards (AMD Ryzen)
Same issue here on Ryzen 5 1600 + Gigabyte AB350M Gaming 3 when fresh- installing Kubuntu 17.10. Shouldn't the importance of this issue be at least "High"? What can be worse than if you can't even install the OS on your PC? In the meantime as a workaround, Fedora 26 seems to work fine. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1671360 Title: System doesn't boot properly on Gigabyte AM4 motherboards (AMD Ryzen) Status in linux package in Ubuntu: Confirmed Bug description: I'm trying to run ubuntu on Ryzen 1700x with Gigabyte GA-AB350-gaming-3 motherboard, and it has a load of problems, starting with not being able to boot normally. During normal boot, on 16.10 as well as 17.04 beta: system doesn't boot normally, hangs with a lot of "unexpected irq trap at vector 07" messages displayed. Following advice from various places, I've tried:disable cpu freq governor and cpu handling in acpi settings 1. add "acpi=off" to boot params That helps, allowing me to boot into recovery mode, though it leaves me with system seeing only one core, is really slow and still only boots in recovery mode. 2. Compile own kernel using 4.11.rc1 and disabling cpu freq governor and cpu handling in acpi settings. Boot with "quiet loglevel=3" option. That gets me even further - system sees all cores now. Still only recovery mode though, but its enough to get info for this bug report. Some observed problems: 1. dmesg reports *a lot* of messages like this all the time: [ 163.362068] ->handle_irq(): 87a7e090, [ 163.362081] bad_chained_irq+0x0/0x40 [ 163.362089] ->handle_irq(): 87a7e090, [ 163.362090] amd_gpio_irq_handler+0x0/0x200 [ 163.362090] ->irq_data.chip(): 88587e20, [ 163.362090] ioapic_ir_chip+0x0/0x120 [ 163.362090] ->action(): 884601c0 [ 163.362091]IRQ_NOPROBE set [ 163.362099] ->handle_irq(): 87a7e090, [ 163.362099] amd_gpio_irq_handler+0x0/0x200 [ 163.362100] ->irq_data.chip(): 88587e20, [ 163.362100] ioapic_ir_chip+0x0/0x120 [ 163.362101] ->action(): 884601c0 I've tried to redirect dmesg to a file, stopped after a short while, it generated 400M of those. 2. Systemd cannot start journald. Perhaps because it cannot cope with amount of kernel logs? 3. Looking at pci, I've noticed something called AMDI0040 (/sys/bus/acpi/devices/AMDI0040, path=_SB_.EMMC), among AMDI0010, AMDI0020, AMDI0030. Those however are mentioned in kernel source, kernel and google are completely silent about AMDI0040. Phoronix tested ryzen using different motherboard, and it worked better (though not well), so I suspect it is an issue with motherboard. --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 DistroRelease: Ubuntu 17.04 InstallationDate: Installed on 2015-08-06 (581 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150728.1) Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash Tags: zesty Uname: Linux 4.11.0-rc1-custom x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to zesty on 2017-03-03 (6 days ago) UserGroups: _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1671360/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
