[Kernel-packages] [Bug 1671360] Re: System doesn't boot properly on Gigabyte AM4 motherboards (AMD Ryzen)
Some inputs for what it's worth... with a self built 4.10.4 from a few weeks back but same config as yours (AMD pinctrl disabled) - no other changes: - USB works fine on all the ports I tried (several devices) - Network works fine (both ports Intel and Killer Networks) - NVMe drive works fine - SATA drive works fine - NVidia closed source drivers work fine with the patch (see above in this thread for pointers to make the nvidia driver work on 4.10.x) - I haven't tested audio but it's displayed correctly in the settings I haven't yet noticed something that doesn't work because of that change. I'm tempted to think that the gpio ports are possibly used to control the onboard LED lighting and stuff like that... Board is GA-AX370-Gaming5 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1671360 Title: System doesn't boot properly on Gigabyte AM4 motherboards (AMD Ryzen) Status in linux package in Ubuntu: Confirmed Bug description: I'm trying to run ubuntu on Ryzen 1700x with Gigabyte GA-AB350-gaming-3 motherboard, and it has a load of problems, starting with not being able to boot normally. During normal boot, on 16.10 as well as 17.04 beta: system doesn't boot normally, hangs with a lot of "unexpected irq trap at vector 07" messages displayed. Following advice from various places, I've tried:disable cpu freq governor and cpu handling in acpi settings 1. add "acpi=off" to boot params That helps, allowing me to boot into recovery mode, though it leaves me with system seeing only one core, is really slow and still only boots in recovery mode. 2. Compile own kernel using 4.11.rc1 and disabling cpu freq governor and cpu handling in acpi settings. Boot with "quiet loglevel=3" option. That gets me even further - system sees all cores now. Still only recovery mode though, but its enough to get info for this bug report. Some observed problems: 1. dmesg reports *a lot* of messages like this all the time: [ 163.362068] ->handle_irq(): 87a7e090, [ 163.362081] bad_chained_irq+0x0/0x40 [ 163.362089] ->handle_irq(): 87a7e090, [ 163.362090] amd_gpio_irq_handler+0x0/0x200 [ 163.362090] ->irq_data.chip(): 88587e20, [ 163.362090] ioapic_ir_chip+0x0/0x120 [ 163.362090] ->action(): 884601c0 [ 163.362091]IRQ_NOPROBE set [ 163.362099] ->handle_irq(): 87a7e090, [ 163.362099] amd_gpio_irq_handler+0x0/0x200 [ 163.362100] ->irq_data.chip(): 88587e20, [ 163.362100] ioapic_ir_chip+0x0/0x120 [ 163.362101] ->action(): 884601c0 I've tried to redirect dmesg to a file, stopped after a short while, it generated 400M of those. 2. Systemd cannot start journald. Perhaps because it cannot cope with amount of kernel logs? 3. Looking at pci, I've noticed something called AMDI0040 (/sys/bus/acpi/devices/AMDI0040, path=_SB_.EMMC), among AMDI0010, AMDI0020, AMDI0030. Those however are mentioned in kernel source, kernel and google are completely silent about AMDI0040. Phoronix tested ryzen using different motherboard, and it worked better (though not well), so I suspect it is an issue with motherboard. --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 DistroRelease: Ubuntu 17.04 InstallationDate: Installed on 2015-08-06 (581 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150728.1) Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash Tags: zesty Uname: Linux 4.11.0-rc1-custom x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to zesty on 2017-03-03 (6 days ago) UserGroups: _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1671360/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1671360] Re: System doesn't boot properly on Gigabyte AM4 motherboards (AMD Ryzen)
@Eric Joslyn: you can do the same with a stable kernel from the 4.10 series, no need to be on the bleeding edge with release candidates. (I see it's been backported to 4.9 too) The key patch you really want to get in is the one that correctly identifies the hyper-threading capabilities of the Ryzen which came in 4.10 so anything from 4.10.0 upwards should give you the full performance. More info over there: https://www.phoronix.com/scan.php?page=news_item=AMD-Ryzen-Newer- Kernel -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1671360 Title: System doesn't boot properly on Gigabyte AM4 motherboards (AMD Ryzen) Status in linux package in Ubuntu: Confirmed Bug description: I'm trying to run ubuntu on Ryzen 1700x with Gigabyte GA-AB350-gaming-3 motherboard, and it has a load of problems, starting with not being able to boot normally. During normal boot, on 16.10 as well as 17.04 beta: system doesn't boot normally, hangs with a lot of "unexpected irq trap at vector 07" messages displayed. Following advice from various places, I've tried:disable cpu freq governor and cpu handling in acpi settings 1. add "acpi=off" to boot params That helps, allowing me to boot into recovery mode, though it leaves me with system seeing only one core, is really slow and still only boots in recovery mode. 2. Compile own kernel using 4.11.rc1 and disabling cpu freq governor and cpu handling in acpi settings. Boot with "quiet loglevel=3" option. That gets me even further - system sees all cores now. Still only recovery mode though, but its enough to get info for this bug report. Some observed problems: 1. dmesg reports *a lot* of messages like this all the time: [ 163.362068] ->handle_irq(): 87a7e090, [ 163.362081] bad_chained_irq+0x0/0x40 [ 163.362089] ->handle_irq(): 87a7e090, [ 163.362090] amd_gpio_irq_handler+0x0/0x200 [ 163.362090] ->irq_data.chip(): 88587e20, [ 163.362090] ioapic_ir_chip+0x0/0x120 [ 163.362090] ->action(): 884601c0 [ 163.362091]IRQ_NOPROBE set [ 163.362099] ->handle_irq(): 87a7e090, [ 163.362099] amd_gpio_irq_handler+0x0/0x200 [ 163.362100] ->irq_data.chip(): 88587e20, [ 163.362100] ioapic_ir_chip+0x0/0x120 [ 163.362101] ->action(): 884601c0 I've tried to redirect dmesg to a file, stopped after a short while, it generated 400M of those. 2. Systemd cannot start journald. Perhaps because it cannot cope with amount of kernel logs? 3. Looking at pci, I've noticed something called AMDI0040 (/sys/bus/acpi/devices/AMDI0040, path=_SB_.EMMC), among AMDI0010, AMDI0020, AMDI0030. Those however are mentioned in kernel source, kernel and google are completely silent about AMDI0040. Phoronix tested ryzen using different motherboard, and it worked better (though not well), so I suspect it is an issue with motherboard. --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 DistroRelease: Ubuntu 17.04 InstallationDate: Installed on 2015-08-06 (581 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150728.1) Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash Tags: zesty Uname: Linux 4.11.0-rc1-custom x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to zesty on 2017-03-03 (6 days ago) UserGroups: _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1671360/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1671360] Re: System doesn't boot properly on Gigabyte AM4 motherboards (AMD Ryzen)
In any case if this is confirmed we need to raise the issue with them. In the past they've been "hiding" behind the fact that the motherboard specification page says: Operating System Support for Windows 10 64-bit Support for Windows 7 64-bit * Please download the "Windows USB Installation Tool" from GIGABYTE's website and install it before installing Windows 7. Given recent Microsoft announcements that the most recent silicon will only be supported under Windows 10, this makes all Ryzen Gigabyte boards pretty much mono OS... I'm hoping that I'm not the only one to find it unacceptable that consumer choice has narrowed down to such an extent :-) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1671360 Title: System doesn't boot properly on Gigabyte AM4 motherboards (AMD Ryzen) Status in linux package in Ubuntu: Confirmed Bug description: I'm trying to run ubuntu on Ryzen 1700x with Gigabyte GA-AB350-gaming-3 motherboard, and it has a load of problems, starting with not being able to boot normally. During normal boot, on 16.10 as well as 17.04 beta: system doesn't boot normally, hangs with a lot of "unexpected irq trap at vector 07" messages displayed. Following advice from various places, I've tried:disable cpu freq governor and cpu handling in acpi settings 1. add "acpi=off" to boot params That helps, allowing me to boot into recovery mode, though it leaves me with system seeing only one core, is really slow and still only boots in recovery mode. 2. Compile own kernel using 4.11.rc1 and disabling cpu freq governor and cpu handling in acpi settings. Boot with "quiet loglevel=3" option. That gets me even further - system sees all cores now. Still only recovery mode though, but its enough to get info for this bug report. Some observed problems: 1. dmesg reports *a lot* of messages like this all the time: [ 163.362068] ->handle_irq(): 87a7e090, [ 163.362081] bad_chained_irq+0x0/0x40 [ 163.362089] ->handle_irq(): 87a7e090, [ 163.362090] amd_gpio_irq_handler+0x0/0x200 [ 163.362090] ->irq_data.chip(): 88587e20, [ 163.362090] ioapic_ir_chip+0x0/0x120 [ 163.362090] ->action(): 884601c0 [ 163.362091]IRQ_NOPROBE set [ 163.362099] ->handle_irq(): 87a7e090, [ 163.362099] amd_gpio_irq_handler+0x0/0x200 [ 163.362100] ->irq_data.chip(): 88587e20, [ 163.362100] ioapic_ir_chip+0x0/0x120 [ 163.362101] ->action(): 884601c0 I've tried to redirect dmesg to a file, stopped after a short while, it generated 400M of those. 2. Systemd cannot start journald. Perhaps because it cannot cope with amount of kernel logs? 3. Looking at pci, I've noticed something called AMDI0040 (/sys/bus/acpi/devices/AMDI0040, path=_SB_.EMMC), among AMDI0010, AMDI0020, AMDI0030. Those however are mentioned in kernel source, kernel and google are completely silent about AMDI0040. Phoronix tested ryzen using different motherboard, and it worked better (though not well), so I suspect it is an issue with motherboard. --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 DistroRelease: Ubuntu 17.04 InstallationDate: Installed on 2015-08-06 (581 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150728.1) Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash Tags: zesty Uname: Linux 4.11.0-rc1-custom x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to zesty on 2017-03-03 (6 days ago) UserGroups: _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1671360/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1671360] Re: System doesn't boot properly on AMD Ryzen / Gigabyte GA-AB350-gaming-3
@Eric: I've managed to boot the system using your custom built kernel! Not usable really now as the nvidia driver installation is failing but much better... So clearly the code around PINCTRL_AMD seems to be related. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1671360 Title: System doesn't boot properly on AMD Ryzen / Gigabyte GA-AB350-gaming-3 Status in linux package in Ubuntu: Confirmed Bug description: I'm trying to run ubuntu on Ryzen 1700x with Gigabyte GA-AB350-gaming-3 motherboard, and it has a load of problems, starting with not being able to boot normally. During normal boot, on 16.10 as well as 17.04 beta: system doesn't boot normally, hangs with a lot of "unexpected irq trap at vector 07" messages displayed. Following advice from various places, I've tried:disable cpu freq governor and cpu handling in acpi settings 1. add "acpi=off" to boot params That helps, allowing me to boot into recovery mode, though it leaves me with system seeing only one core, is really slow and still only boots in recovery mode. 2. Compile own kernel using 4.11.rc1 and disabling cpu freq governor and cpu handling in acpi settings. Boot with "quiet loglevel=3" option. That gets me even further - system sees all cores now. Still only recovery mode though, but its enough to get info for this bug report. Some observed problems: 1. dmesg reports *a lot* of messages like this all the time: [ 163.362068] ->handle_irq(): 87a7e090, [ 163.362081] bad_chained_irq+0x0/0x40 [ 163.362089] ->handle_irq(): 87a7e090, [ 163.362090] amd_gpio_irq_handler+0x0/0x200 [ 163.362090] ->irq_data.chip(): 88587e20, [ 163.362090] ioapic_ir_chip+0x0/0x120 [ 163.362090] ->action(): 884601c0 [ 163.362091]IRQ_NOPROBE set [ 163.362099] ->handle_irq(): 87a7e090, [ 163.362099] amd_gpio_irq_handler+0x0/0x200 [ 163.362100] ->irq_data.chip(): 88587e20, [ 163.362100] ioapic_ir_chip+0x0/0x120 [ 163.362101] ->action(): 884601c0 I've tried to redirect dmesg to a file, stopped after a short while, it generated 400M of those. 2. Systemd cannot start journald. Perhaps because it cannot cope with amount of kernel logs? 3. Looking at pci, I've noticed something called AMDI0040 (/sys/bus/acpi/devices/AMDI0040, path=_SB_.EMMC), among AMDI0010, AMDI0020, AMDI0030. Those however are mentioned in kernel source, kernel and google are completely silent about AMDI0040. Phoronix tested ryzen using different motherboard, and it worked better (though not well), so I suspect it is an issue with motherboard. --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 DistroRelease: Ubuntu 17.04 InstallationDate: Installed on 2015-08-06 (581 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150728.1) Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash Tags: zesty Uname: Linux 4.11.0-rc1-custom x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to zesty on 2017-03-03 (6 days ago) UserGroups: _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1671360/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1671360] Re: System doesn't boot properly on AMD Ryzen / Gigabyte GA-AB350-gaming-3
Hi Cosmin, thanks a lot for the details. I can see a couple of differences that I need to look into: - Chipset is different B350 vs. X370 - I attempted the fresh 16.04 install from a USB stick instead of a DVD (I've got no optical drive at all, so can't test that) -> IRQ TRAP (same with 16.10 and 17.04 beta) So my next tentative will be to take the drive out from that computer, install in a different one and perform the 16.04 install and move it back to the Ryzen system. That would be similar to your initial state with a working 16.04. One last question (:-), was your existing 16.04 running on a special kernel version before you moved your SSD to your new Ryzen system? Thanks! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1671360 Title: System doesn't boot properly on AMD Ryzen / Gigabyte GA-AB350-gaming-3 Status in linux package in Ubuntu: Confirmed Bug description: I'm trying to run ubuntu on Ryzen 1700x with Gigabyte GA-AB350-gaming-3 motherboard, and it has a load of problems, starting with not being able to boot normally. During normal boot, on 16.10 as well as 17.04 beta: system doesn't boot normally, hangs with a lot of "unexpected irq trap at vector 07" messages displayed. Following advice from various places, I've tried:disable cpu freq governor and cpu handling in acpi settings 1. add "acpi=off" to boot params That helps, allowing me to boot into recovery mode, though it leaves me with system seeing only one core, is really slow and still only boots in recovery mode. 2. Compile own kernel using 4.11.rc1 and disabling cpu freq governor and cpu handling in acpi settings. Boot with "quiet loglevel=3" option. That gets me even further - system sees all cores now. Still only recovery mode though, but its enough to get info for this bug report. Some observed problems: 1. dmesg reports *a lot* of messages like this all the time: [ 163.362068] ->handle_irq(): 87a7e090, [ 163.362081] bad_chained_irq+0x0/0x40 [ 163.362089] ->handle_irq(): 87a7e090, [ 163.362090] amd_gpio_irq_handler+0x0/0x200 [ 163.362090] ->irq_data.chip(): 88587e20, [ 163.362090] ioapic_ir_chip+0x0/0x120 [ 163.362090] ->action(): 884601c0 [ 163.362091]IRQ_NOPROBE set [ 163.362099] ->handle_irq(): 87a7e090, [ 163.362099] amd_gpio_irq_handler+0x0/0x200 [ 163.362100] ->irq_data.chip(): 88587e20, [ 163.362100] ioapic_ir_chip+0x0/0x120 [ 163.362101] ->action(): 884601c0 I've tried to redirect dmesg to a file, stopped after a short while, it generated 400M of those. 2. Systemd cannot start journald. Perhaps because it cannot cope with amount of kernel logs? 3. Looking at pci, I've noticed something called AMDI0040 (/sys/bus/acpi/devices/AMDI0040, path=_SB_.EMMC), among AMDI0010, AMDI0020, AMDI0030. Those however are mentioned in kernel source, kernel and google are completely silent about AMDI0040. Phoronix tested ryzen using different motherboard, and it worked better (though not well), so I suspect it is an issue with motherboard. --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 DistroRelease: Ubuntu 17.04 InstallationDate: Installed on 2015-08-06 (581 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150728.1) Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash Tags: zesty Uname: Linux 4.11.0-rc1-custom x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to zesty on 2017-03-03 (6 days ago) UserGroups: _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1671360/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1671360] Re: System doesn't boot properly on AMD Ryzen / Gigabyte GA-AB350-gaming-3
Cosmin, when you say you installed 16.04, do you mean Ubuntu Studio 16.04 or the standard distribution? Did you install the OS from scratch using an USB stick of some other media? You were trying to do an update to 17.04 so did 16.04 boot initially correctly? Please provide details, just saying it works isn't helping to pinpoint the issue. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1671360 Title: System doesn't boot properly on AMD Ryzen / Gigabyte GA-AB350-gaming-3 Status in linux package in Ubuntu: Confirmed Bug description: I'm trying to run ubuntu on Ryzen 1700x with Gigabyte GA-AB350-gaming-3 motherboard, and it has a load of problems, starting with not being able to boot normally. During normal boot, on 16.10 as well as 17.04 beta: system doesn't boot normally, hangs with a lot of "unexpected irq trap at vector 07" messages displayed. Following advice from various places, I've tried:disable cpu freq governor and cpu handling in acpi settings 1. add "acpi=off" to boot params That helps, allowing me to boot into recovery mode, though it leaves me with system seeing only one core, is really slow and still only boots in recovery mode. 2. Compile own kernel using 4.11.rc1 and disabling cpu freq governor and cpu handling in acpi settings. Boot with "quiet loglevel=3" option. That gets me even further - system sees all cores now. Still only recovery mode though, but its enough to get info for this bug report. Some observed problems: 1. dmesg reports *a lot* of messages like this all the time: [ 163.362068] ->handle_irq(): 87a7e090, [ 163.362081] bad_chained_irq+0x0/0x40 [ 163.362089] ->handle_irq(): 87a7e090, [ 163.362090] amd_gpio_irq_handler+0x0/0x200 [ 163.362090] ->irq_data.chip(): 88587e20, [ 163.362090] ioapic_ir_chip+0x0/0x120 [ 163.362090] ->action(): 884601c0 [ 163.362091]IRQ_NOPROBE set [ 163.362099] ->handle_irq(): 87a7e090, [ 163.362099] amd_gpio_irq_handler+0x0/0x200 [ 163.362100] ->irq_data.chip(): 88587e20, [ 163.362100] ioapic_ir_chip+0x0/0x120 [ 163.362101] ->action(): 884601c0 I've tried to redirect dmesg to a file, stopped after a short while, it generated 400M of those. 2. Systemd cannot start journald. Perhaps because it cannot cope with amount of kernel logs? 3. Looking at pci, I've noticed something called AMDI0040 (/sys/bus/acpi/devices/AMDI0040, path=_SB_.EMMC), among AMDI0010, AMDI0020, AMDI0030. Those however are mentioned in kernel source, kernel and google are completely silent about AMDI0040. Phoronix tested ryzen using different motherboard, and it worked better (though not well), so I suspect it is an issue with motherboard. --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 DistroRelease: Ubuntu 17.04 InstallationDate: Installed on 2015-08-06 (581 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150728.1) Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash Tags: zesty Uname: Linux 4.11.0-rc1-custom x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to zesty on 2017-03-03 (6 days ago) UserGroups: _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1671360/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1671360] Re: System doesn't boot properly on AMD Ryzen / Gigabyte GA-AB350-gaming-3
Still no dice. Tried another path: - Installed on a spare HDD using VMware in Windows (assigned full disk to VMware), no additional drivers or anything changed - Updated kernel to 4.11rc1 (using prebuild binaries) - Updated grub parameters: acpi=off quiet loglevel=3 - Rebooted computer with that drive as the boot disk Still gets stuck during startup. Removing the acpi=off parameter spews again the irq trap messages so same situation. Setup is 1700X on Gigabyte GA-AX370-Gaming 5 motherboard For all it's worth I'm also using an NVMe bootdrive - not sure it makes a difference. Giving up until a kernel dev with the appropriate knowledge looks into this. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1671360 Title: System doesn't boot properly on AMD Ryzen / Gigabyte GA-AB350-gaming-3 Status in linux package in Ubuntu: Confirmed Bug description: I'm trying to run ubuntu on Ryzen 1700x with Gigabyte GA-AB350-gaming-3 motherboard, and it has a load of problems, starting with not being able to boot normally. During normal boot, on 16.10 as well as 17.04 beta: system doesn't boot normally, hangs with a lot of "unexpected irq trap at vector 07" messages displayed. Following advice from various places, I've tried:disable cpu freq governor and cpu handling in acpi settings 1. add "acpi=off" to boot params That helps, allowing me to boot into recovery mode, though it leaves me with system seeing only one core, is really slow and still only boots in recovery mode. 2. Compile own kernel using 4.11.rc1 and disabling cpu freq governor and cpu handling in acpi settings. Boot with "quiet loglevel=3" option. That gets me even further - system sees all cores now. Still only recovery mode though, but its enough to get info for this bug report. Some observed problems: 1. dmesg reports *a lot* of messages like this all the time: [ 163.362068] ->handle_irq(): 87a7e090, [ 163.362081] bad_chained_irq+0x0/0x40 [ 163.362089] ->handle_irq(): 87a7e090, [ 163.362090] amd_gpio_irq_handler+0x0/0x200 [ 163.362090] ->irq_data.chip(): 88587e20, [ 163.362090] ioapic_ir_chip+0x0/0x120 [ 163.362090] ->action(): 884601c0 [ 163.362091]IRQ_NOPROBE set [ 163.362099] ->handle_irq(): 87a7e090, [ 163.362099] amd_gpio_irq_handler+0x0/0x200 [ 163.362100] ->irq_data.chip(): 88587e20, [ 163.362100] ioapic_ir_chip+0x0/0x120 [ 163.362101] ->action(): 884601c0 I've tried to redirect dmesg to a file, stopped after a short while, it generated 400M of those. 2. Systemd cannot start journald. Perhaps because it cannot cope with amount of kernel logs? 3. Looking at pci, I've noticed something called AMDI0040 (/sys/bus/acpi/devices/AMDI0040, path=_SB_.EMMC), among AMDI0010, AMDI0020, AMDI0030. Those however are mentioned in kernel source, kernel and google are completely silent about AMDI0040. Phoronix tested ryzen using different motherboard, and it worked better (though not well), so I suspect it is an issue with motherboard. --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 DistroRelease: Ubuntu 17.04 InstallationDate: Installed on 2015-08-06 (581 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150728.1) Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash Tags: zesty Uname: Linux 4.11.0-rc1-custom x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to zesty on 2017-03-03 (6 days ago) UserGroups: _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1671360/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1671360] Re: System doesn't boot properly on AMD Ryzen / Gigabyte GA-AB350-gaming-3
Maciej, do you have any suggestions if there is no previous OS installed? Any way for to fix the installation image so that I can at least get a base installation going? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1671360 Title: System doesn't boot properly on AMD Ryzen / Gigabyte GA-AB350-gaming-3 Status in linux package in Ubuntu: Confirmed Bug description: I'm trying to run ubuntu on Ryzen 1700x with Gigabyte GA-AB350-gaming-3 motherboard, and it has a load of problems, starting with not being able to boot normally. During normal boot, on 16.10 as well as 17.04 beta: system doesn't boot normally, hangs with a lot of "unexpected irq trap at vector 07" messages displayed. Following advice from various places, I've tried:disable cpu freq governor and cpu handling in acpi settings 1. add "acpi=off" to boot params That helps, allowing me to boot into recovery mode, though it leaves me with system seeing only one core, is really slow and still only boots in recovery mode. 2. Compile own kernel using 4.11.rc1 and disabling cpu freq governor and cpu handling in acpi settings. Boot with "quiet loglevel=3" option. That gets me even further - system sees all cores now. Still only recovery mode though, but its enough to get info for this bug report. Some observed problems: 1. dmesg reports *a lot* of messages like this all the time: [ 163.362068] ->handle_irq(): 87a7e090, [ 163.362081] bad_chained_irq+0x0/0x40 [ 163.362089] ->handle_irq(): 87a7e090, [ 163.362090] amd_gpio_irq_handler+0x0/0x200 [ 163.362090] ->irq_data.chip(): 88587e20, [ 163.362090] ioapic_ir_chip+0x0/0x120 [ 163.362090] ->action(): 884601c0 [ 163.362091]IRQ_NOPROBE set [ 163.362099] ->handle_irq(): 87a7e090, [ 163.362099] amd_gpio_irq_handler+0x0/0x200 [ 163.362100] ->irq_data.chip(): 88587e20, [ 163.362100] ioapic_ir_chip+0x0/0x120 [ 163.362101] ->action(): 884601c0 I've tried to redirect dmesg to a file, stopped after a short while, it generated 400M of those. 2. Systemd cannot start journald. Perhaps because it cannot cope with amount of kernel logs? 3. Looking at pci, I've noticed something called AMDI0040 (/sys/bus/acpi/devices/AMDI0040, path=_SB_.EMMC), among AMDI0010, AMDI0020, AMDI0030. Those however are mentioned in kernel source, kernel and google are completely silent about AMDI0040. Phoronix tested ryzen using different motherboard, and it worked better (though not well), so I suspect it is an issue with motherboard. --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 DistroRelease: Ubuntu 17.04 InstallationDate: Installed on 2015-08-06 (581 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Alpha amd64 (20150728.1) Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash Tags: zesty Uname: Linux 4.11.0-rc1-custom x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to zesty on 2017-03-03 (6 days ago) UserGroups: _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1671360/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
