[Kernel-packages] [Bug 1287157] Re: Bridge only working on second netcard - be2net
Submitted bugreport upstream. Verified that the error also exist in Fedora. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1287157 Title: Bridge only working on second netcard - be2net Status in “linux” package in Ubuntu: Triaged Bug description: This is reduced bug report for a bug similar to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1213887 What we have done is to make a simple network and basic installation af 14.04 daily build from 2014-03-03. The error is also in 12.04 and later kernels. If we use the first network card a a bridge: /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto p5p1 iface p5p1 inet manual auto vlan280 iface vlan280 inet static address 10.230.80.26 netmask 255.255.255.0 gateway 10.230.80.1 dns-search 10.230.80.11 10.230.80.12 bridge_ports p5p1 bridge_maxwait 0 bridge_fd 0 bridge stp_off auto p5p2 iface p5p2 inet static mtu 9000 address 10.230.92.26 network 10.230.92.0 netmask 255.255.255.0 post-up ifconfig p5p2 txqueuelen 1 You begin to lose pings and the connection to 10.230.80.26 becomes very unstable. The connection to 10.230.92.26 i running without problems all the time. We get some messages in syslog vlan280: received packet on p5p1 with own address as source address If we switch the bridge to the second networkcard the bridge works: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto p5p2 iface p5p2 inet manual auto vlan280 iface vlan280 inet static address 10.230.80.26 netmask 255.255.255.0 gateway 10.230.80.1 dns-search 10.230.80.11 10.230.80.12 bridge_ports p5p2 bridge_maxwait 0 bridge_fd 0 bridge stp_off auto p5p1 iface p5p1 inet static mtu 9000 address 10.230.92.26 network 10.230.92.0 netmask 255.255.255.0 post-up ifconfig p5p1 txqueuelen 1 A normal network setup does not give any problems at all on p5p1 lsb_release -rd: Description:Ubuntu Trusty Tahr (development branch) Release:14.04 lsmod: Module Size Used by drbd 323103 0 lru_cache 15442 1 drbd libcrc32c 12644 1 drbd bridge110702 0 stp12976 1 bridge llc14552 2 stp,bridge intel_rapl 18773 0 x86_pkg_temp_thermal14162 0 intel_powerclamp 14705 0 coretemp 13435 0 kvm_intel 143060 0 kvm 451519 1 kvm_intel crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ghash_clmulni_intel13259 0 aesni_intel55624 0 aes_x86_64 17131 1 aesni_intel lrw13286 1 aesni_intel gf128mul 14951 1 lrw glue_helper13990 1 aesni_intel ablk_helper13597 1 aesni_intel cryptd 20359 3 ghash_clmulni_intel,aesni_intel,ablk_helper gpio_ich 13476 0 microcode 23656 0 psmouse 101945 0 serio_raw 13462 0 joydev 17381 0 sb_edac22344 0 edac_core 62291 1 sb_edac ioatdma63447 0 lpc_ich21080 0 hpilo 17381 0 hpwdt 14242 0 dca15130 1 ioatdma ipmi_si53257 0 acpi_power_meter 18058 0 mac_hid13205 0 lp 17759 0 parport42348 1 lp hid_generic12548 0 tg3 166442 0 usbhid 52616 0 ptp18933 1 tg3 hid 106148 2 hid_generic,usbhid be2net104514 0 hpsa 67363 2 pps_core 19382 1 ptp ethtool -i p5p1 driver: be2net version: 10.0.600.0u firmware-version: 4.6.247.5 bus-info: :24:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: no supports-priv-flags: no To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1287157/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1287157] Re: Bridge only working on second netcard - be2net
** Tags added: trust -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1287157 Title: Bridge only working on second netcard - be2net Status in “linux” package in Ubuntu: Incomplete Bug description: This is reduced bug report for a bug similar to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1213887 What we have done is to make a simple network and basic installation af 14.04 daily build from 2014-03-03. The error is also in 12.04 and later kernels. If we use the first network card a a bridge: /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto p5p1 iface p5p1 inet manual auto vlan280 iface vlan280 inet static address 10.230.80.26 netmask 255.255.255.0 gateway 10.230.80.1 dns-search 10.230.80.11 10.230.80.12 bridge_ports p5p1 bridge_maxwait 0 bridge_fd 0 bridge stp_off auto p5p2 iface p5p2 inet static mtu 9000 address 10.230.92.26 network 10.230.92.0 netmask 255.255.255.0 post-up ifconfig p5p2 txqueuelen 1 You begin to lose pings and the connection to 10.230.80.26 becomes very unstable. The connection to 10.230.92.26 i running without problems all the time. We get some messages in syslog vlan280: received packet on p5p1 with own address as source address If we switch the bridge to the second networkcard the bridge works: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto p5p2 iface p5p2 inet manual auto vlan280 iface vlan280 inet static address 10.230.80.26 netmask 255.255.255.0 gateway 10.230.80.1 dns-search 10.230.80.11 10.230.80.12 bridge_ports p5p2 bridge_maxwait 0 bridge_fd 0 bridge stp_off auto p5p1 iface p5p1 inet static mtu 9000 address 10.230.92.26 network 10.230.92.0 netmask 255.255.255.0 post-up ifconfig p5p1 txqueuelen 1 A normal network setup does not give any problems at all on p5p1 lsb_release -rd: Description:Ubuntu Trusty Tahr (development branch) Release:14.04 lsmod: Module Size Used by drbd 323103 0 lru_cache 15442 1 drbd libcrc32c 12644 1 drbd bridge110702 0 stp12976 1 bridge llc14552 2 stp,bridge intel_rapl 18773 0 x86_pkg_temp_thermal14162 0 intel_powerclamp 14705 0 coretemp 13435 0 kvm_intel 143060 0 kvm 451519 1 kvm_intel crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ghash_clmulni_intel13259 0 aesni_intel55624 0 aes_x86_64 17131 1 aesni_intel lrw13286 1 aesni_intel gf128mul 14951 1 lrw glue_helper13990 1 aesni_intel ablk_helper13597 1 aesni_intel cryptd 20359 3 ghash_clmulni_intel,aesni_intel,ablk_helper gpio_ich 13476 0 microcode 23656 0 psmouse 101945 0 serio_raw 13462 0 joydev 17381 0 sb_edac22344 0 edac_core 62291 1 sb_edac ioatdma63447 0 lpc_ich21080 0 hpilo 17381 0 hpwdt 14242 0 dca15130 1 ioatdma ipmi_si53257 0 acpi_power_meter 18058 0 mac_hid13205 0 lp 17759 0 parport42348 1 lp hid_generic12548 0 tg3 166442 0 usbhid 52616 0 ptp18933 1 tg3 hid 106148 2 hid_generic,usbhid be2net104514 0 hpsa 67363 2 pps_core 19382 1 ptp ethtool -i p5p1 driver: be2net version: 10.0.600.0u firmware-version: 4.6.247.5 bus-info: :24:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: no supports-priv-flags: no To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1287157/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1287157] Re: Bridge only working on second netcard - be2net
Tried the 10.0.800.0 driver from emulex: http://www.emulex.com/downloads/emulex/drivers/linux/ubuntu/drivers/ on ubuntu 13.04 This did not solve the problem ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1287157 Title: Bridge only working on second netcard - be2net Status in “linux” package in Ubuntu: Confirmed Bug description: This is reduced bug report for a bug similar to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1213887 What we have done is to make a simple network and basic installation af 14.04 daily build from 2014-03-03. The error is also in 12.04 and later kernels. If we use the first network card a a bridge: /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto p5p1 iface p5p1 inet manual auto vlan280 iface vlan280 inet static address 10.230.80.26 netmask 255.255.255.0 gateway 10.230.80.1 dns-search 10.230.80.11 10.230.80.12 bridge_ports p5p1 bridge_maxwait 0 bridge_fd 0 bridge stp_off auto p5p2 iface p5p2 inet static mtu 9000 address 10.230.92.26 network 10.230.92.0 netmask 255.255.255.0 post-up ifconfig p5p2 txqueuelen 1 You begin to lose pings and the connection to 10.230.80.26 becomes very unstable. The connection to 10.230.92.26 i running without problems all the time. We get some messages in syslog vlan280: received packet on p5p1 with own address as source address If we switch the bridge to the second networkcard the bridge works: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto p5p2 iface p5p2 inet manual auto vlan280 iface vlan280 inet static address 10.230.80.26 netmask 255.255.255.0 gateway 10.230.80.1 dns-search 10.230.80.11 10.230.80.12 bridge_ports p5p2 bridge_maxwait 0 bridge_fd 0 bridge stp_off auto p5p1 iface p5p1 inet static mtu 9000 address 10.230.92.26 network 10.230.92.0 netmask 255.255.255.0 post-up ifconfig p5p1 txqueuelen 1 A normal network setup does not give any problems at all on p5p1 lsb_release -rd: Description:Ubuntu Trusty Tahr (development branch) Release:14.04 lsmod: Module Size Used by drbd 323103 0 lru_cache 15442 1 drbd libcrc32c 12644 1 drbd bridge110702 0 stp12976 1 bridge llc14552 2 stp,bridge intel_rapl 18773 0 x86_pkg_temp_thermal14162 0 intel_powerclamp 14705 0 coretemp 13435 0 kvm_intel 143060 0 kvm 451519 1 kvm_intel crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ghash_clmulni_intel13259 0 aesni_intel55624 0 aes_x86_64 17131 1 aesni_intel lrw13286 1 aesni_intel gf128mul 14951 1 lrw glue_helper13990 1 aesni_intel ablk_helper13597 1 aesni_intel cryptd 20359 3 ghash_clmulni_intel,aesni_intel,ablk_helper gpio_ich 13476 0 microcode 23656 0 psmouse 101945 0 serio_raw 13462 0 joydev 17381 0 sb_edac22344 0 edac_core 62291 1 sb_edac ioatdma63447 0 lpc_ich21080 0 hpilo 17381 0 hpwdt 14242 0 dca15130 1 ioatdma ipmi_si53257 0 acpi_power_meter 18058 0 mac_hid13205 0 lp 17759 0 parport42348 1 lp hid_generic12548 0 tg3 166442 0 usbhid 52616 0 ptp18933 1 tg3 hid 106148 2 hid_generic,usbhid be2net104514 0 hpsa 67363 2 pps_core 19382 1 ptp ethtool -i p5p1 driver: be2net version: 10.0.600.0u firmware-version: 4.6.247.5 bus-info: :24:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: no supports-priv-flags: no To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1287157/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1287157] Re: Bridge only working on second netcard - be2net
Testet latest v3.14-rc4 it still exist. HP had issued a firmware upgrade to the network card, it did not help: driver: be2net version: 10.0.600.0u firmware-version: 4.9.311.20 It did not solve the problem tags:kernel-bug-exists-upstream ** Tags removed: trusty ** Tags added: kernel-bug-exists-upstream -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1287157 Title: Bridge only working on second netcard - be2net Status in “linux” package in Ubuntu: Incomplete Bug description: This is reduced bug report for a bug similar to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1213887 What we have done is to make a simple network and basic installation af 14.04 daily build from 2014-03-03. The error is also in 12.04 and later kernels. If we use the first network card a a bridge: /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto p5p1 iface p5p1 inet manual auto vlan280 iface vlan280 inet static address 10.230.80.26 netmask 255.255.255.0 gateway 10.230.80.1 dns-search 10.230.80.11 10.230.80.12 bridge_ports p5p1 bridge_maxwait 0 bridge_fd 0 bridge stp_off auto p5p2 iface p5p2 inet static mtu 9000 address 10.230.92.26 network 10.230.92.0 netmask 255.255.255.0 post-up ifconfig p5p2 txqueuelen 1 You begin to lose pings and the connection to 10.230.80.26 becomes very unstable. The connection to 10.230.92.26 i running without problems all the time. We get some messages in syslog vlan280: received packet on p5p1 with own address as source address If we switch the bridge to the second networkcard the bridge works: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto p5p2 iface p5p2 inet manual auto vlan280 iface vlan280 inet static address 10.230.80.26 netmask 255.255.255.0 gateway 10.230.80.1 dns-search 10.230.80.11 10.230.80.12 bridge_ports p5p2 bridge_maxwait 0 bridge_fd 0 bridge stp_off auto p5p1 iface p5p1 inet static mtu 9000 address 10.230.92.26 network 10.230.92.0 netmask 255.255.255.0 post-up ifconfig p5p1 txqueuelen 1 A normal network setup does not give any problems at all on p5p1 lsb_release -rd: Description:Ubuntu Trusty Tahr (development branch) Release:14.04 lsmod: Module Size Used by drbd 323103 0 lru_cache 15442 1 drbd libcrc32c 12644 1 drbd bridge110702 0 stp12976 1 bridge llc14552 2 stp,bridge intel_rapl 18773 0 x86_pkg_temp_thermal14162 0 intel_powerclamp 14705 0 coretemp 13435 0 kvm_intel 143060 0 kvm 451519 1 kvm_intel crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ghash_clmulni_intel13259 0 aesni_intel55624 0 aes_x86_64 17131 1 aesni_intel lrw13286 1 aesni_intel gf128mul 14951 1 lrw glue_helper13990 1 aesni_intel ablk_helper13597 1 aesni_intel cryptd 20359 3 ghash_clmulni_intel,aesni_intel,ablk_helper gpio_ich 13476 0 microcode 23656 0 psmouse 101945 0 serio_raw 13462 0 joydev 17381 0 sb_edac22344 0 edac_core 62291 1 sb_edac ioatdma63447 0 lpc_ich21080 0 hpilo 17381 0 hpwdt 14242 0 dca15130 1 ioatdma ipmi_si53257 0 acpi_power_meter 18058 0 mac_hid13205 0 lp 17759 0 parport42348 1 lp hid_generic12548 0 tg3 166442 0 usbhid 52616 0 ptp18933 1 tg3 hid 106148 2 hid_generic,usbhid be2net104514 0 hpsa 67363 2 pps_core 19382 1 ptp ethtool -i p5p1 driver: be2net version: 10.0.600.0u firmware-version: 4.6.247.5 bus-info: :24:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: no supports-priv-flags: no To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1287157/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe :
[Kernel-packages] [Bug 1287157] Re: Bridge only working on second netcard - be2net
The link http://www.ubuntu.com/testing/ is 404. I can see that there are some errors in my copy-and-paste. It should read: dns-search foo.com dns-nameservers 10.230.80.11 10.230.80.12 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1287157 Title: Bridge only working on second netcard - be2net Status in “linux” package in Ubuntu: Incomplete Bug description: This is reduced bug report for a bug similar to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1213887 What we have done is to make a simple network and basic installation af 14.04 daily build from 2014-03-03. The error is also in 12.04 and later kernels. If we use the first network card a a bridge: /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto p5p1 iface p5p1 inet manual auto vlan280 iface vlan280 inet static address 10.230.80.26 netmask 255.255.255.0 gateway 10.230.80.1 dns-search 10.230.80.11 10.230.80.12 bridge_ports p5p1 bridge_maxwait 0 bridge_fd 0 bridge stp_off auto p5p2 iface p5p2 inet static mtu 9000 address 10.230.92.26 network 10.230.92.0 netmask 255.255.255.0 post-up ifconfig p5p2 txqueuelen 1 You begin to lose pings and the connection to 10.230.80.26 becomes very unstable. The connection to 10.230.92.26 i running without problems all the time. We get some messages in syslog vlan280: received packet on p5p1 with own address as source address If we switch the bridge to the second networkcard the bridge works: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto p5p2 iface p5p2 inet manual auto vlan280 iface vlan280 inet static address 10.230.80.26 netmask 255.255.255.0 gateway 10.230.80.1 dns-search 10.230.80.11 10.230.80.12 bridge_ports p5p2 bridge_maxwait 0 bridge_fd 0 bridge stp_off auto p5p1 iface p5p1 inet static mtu 9000 address 10.230.92.26 network 10.230.92.0 netmask 255.255.255.0 post-up ifconfig p5p1 txqueuelen 1 A normal network setup does not give any problems at all on p5p1 lsb_release -rd: Description:Ubuntu Trusty Tahr (development branch) Release:14.04 lsmod: Module Size Used by drbd 323103 0 lru_cache 15442 1 drbd libcrc32c 12644 1 drbd bridge110702 0 stp12976 1 bridge llc14552 2 stp,bridge intel_rapl 18773 0 x86_pkg_temp_thermal14162 0 intel_powerclamp 14705 0 coretemp 13435 0 kvm_intel 143060 0 kvm 451519 1 kvm_intel crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ghash_clmulni_intel13259 0 aesni_intel55624 0 aes_x86_64 17131 1 aesni_intel lrw13286 1 aesni_intel gf128mul 14951 1 lrw glue_helper13990 1 aesni_intel ablk_helper13597 1 aesni_intel cryptd 20359 3 ghash_clmulni_intel,aesni_intel,ablk_helper gpio_ich 13476 0 microcode 23656 0 psmouse 101945 0 serio_raw 13462 0 joydev 17381 0 sb_edac22344 0 edac_core 62291 1 sb_edac ioatdma63447 0 lpc_ich21080 0 hpilo 17381 0 hpwdt 14242 0 dca15130 1 ioatdma ipmi_si53257 0 acpi_power_meter 18058 0 mac_hid13205 0 lp 17759 0 parport42348 1 lp hid_generic12548 0 tg3 166442 0 usbhid 52616 0 ptp18933 1 tg3 hid 106148 2 hid_generic,usbhid be2net104514 0 hpsa 67363 2 pps_core 19382 1 ptp ethtool -i p5p1 driver: be2net version: 10.0.600.0u firmware-version: 4.6.247.5 bus-info: :24:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: no supports-priv-flags: no To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1287157/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1013199] Re: be2net driver used by HP BL460c bridge networking not working
Looks like a similar bug here, but on HP ProLiant DL380p Gen8: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1213887 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1013199 Title: be2net driver used by HP BL460c bridge networking not working Status in “linux” package in Ubuntu: Invalid Bug description: When using bridge networking under Ubuntu 12.04 LTS on HP C-Clase Blades (BL460c G7) which uses the be2net driver, networking doesn't work. Networking without bridging (assigning an address directly to, say, eth0) does work. To recreate 1. Configure eth0 with an address 2. Test ping to other server on same network 3. Works Now take down the interface and configure bridging. 1. /etc/network/interfaces # Bridge between eth0 and eth1 auto br0 iface br0 inet static address 192.168.1.10 netmask 255.255.255.0 network 192.168.1.0 gateway 192.168.1.1 pre-up ip link set eth0 down pre-up brctl addbr br0 pre-up brctl addif br0 eth0 pre-up ip addr flush dev eth0 post-down ip link set eth0 down post-down ip link set br0 down post-down brctl delif br0 eth0 post-down brctl delbr br0 2. Bring br0 up 3. Ping other server on network 4. Doesn't work 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux 02:00.0 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01) 02:00.1 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01) 02:00.2 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01) 02:00.3 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01) 02:00.4 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01) 02:00.5 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01) 02:00.6 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01) 02:00.7 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01) lsmod | grep be2net be2net 78296 0 ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image (not installed) ProcVersionSignature: Ubuntu 3.2.0-24.39-generic 3.2.16 Uname: Linux 3.2.0-24-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu8 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: melmoth2460 F pulseaudio CRDA: country GB: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5490 - 5710 @ 40), (N/A, 27), DFS Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xf252 irq 47' Mixer name : 'Intel CougarPoint HDMI' Components : 'HDA:14f1506e,17aa21da,0012 HDA:80862805,80860101,0010' Controls : 26 Simple ctrls : 8 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw unknown' Mixer name : 'ThinkPad EC (unknown)' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Thu Jun 14 16:31:39 2012 EcryptfsInUse: Yes InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012) MachineType: LENOVO 4287CTO ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=ffd0d87e-afc2-4ccf-b2ca-0e7f3dd164d3 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-24-generic N/A linux-backports-modules-3.2.0-24-generic N/A linux-firmware1.79 SourcePackage: linux StagingDrivers: mei UpgradeStatus: Upgraded to precise on 2012-05-14 (31 days ago) dmi.bios.date: 11/01/2011 dmi.bios.vendor: LENOVO dmi.bios.version: 8DET55WW (1.25 ) dmi.board.asset.tag: Not Available dmi.board.name: 4287CTO dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8DET55WW(1.25):bd11/01/2011:svnLENOVO:pn4287CTO:pvrThinkPadX220:rvnLENOVO:rn4287CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 4287CTO dmi.product.version: ThinkPad X220 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1013199/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to :
[Kernel-packages] [Bug 1213887] Re: Bridge does not work i ubuntu 12.04 - kernel 3.5.0-37
Tried to make some reduced testcases: The test is done on: Linux kvm07 3.11.0-031100rc6-generic #201308181835 SMP Sun Aug 18 22:35:54 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Later I tested it on Linux kvm07 3.11.0-031100-generic #201309021735 SMP Mon Sep 2 21:36:21 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux, the problems was not solved. eth3 - testlan driver: tg3 version: 3.132 firmware-version: 5719-v1.31 NCSI v1.1.15.0 bus-info: :03:00.3 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes eth4 - vlan280 driver: be2net version: 4.6.62.0u firmware-version: 4.2.401.605 bus-info: :24:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: no Small kvm scripts: sudo tunctl -u root -t tap42 sudo brctl addif vlan280 tap42 sudo ip link set tap42 up sudo kvm -hda vdisk.img -cdrom /srv/ganeti/iso/linux-secure-13.04-64bit.iso -m 1024 -net nic -net tap,ifname=tap42,script=no -boot d sudo tunctl -u root -t tap42 sudo brctl addif vlan280 tap42 sudo ip link set tap42 up sudo kvm -hda vdisk.img -cdrom /srv/ganeti/iso/ubuntu-rescue-remix-11-10.iso -m 1024 -net nic -net tap,ifname=tap42,script=no -boot d sudo tunctl -u root -t tap42 sudo brctl addif vlan280 tap42 sudo ip link set tap42 up sudo kvm -hda vdisk.img -cdrom /srv/ganeti/iso/clonezilla-live-2.1.1-7-amd64.iso -m 1024 -net nic -net tap,ifname=tap42,script=no -boot d Then I testet it on testlan (tg3 device), the testlan is on the same network at vlan280 All the test working sudo tunctl -u root -t tap43 sudo brctl addif testlan tap43xit sudo ip link set tap43 up sudo kvm -hda vdisk.img -cdrom /srv/ganeti/iso/linux-secure-13.04-64bit.iso -m 1024 -net nic -net tap,ifname=tap43,script=no -boot d sudo tunctl -u root -t tap43 sudo brctl addif testlan tap43 sudo ip link set tap43 up sudo kvm -hda vdisk.img -cdrom /srv/ganeti/iso/ubuntu-rescue-remix-11-10.iso -m 1024 -net nic -net tap,ifname=tap43,script=no -boot d sudo tunctl -u root -t tap43 sudo brctl addif testlan tap43 sudo ip link set tap43 up sudo kvm -hda vdisk.img -cdrom /srv/ganeti/iso/clonezilla-live-2.1.1-7-amd64.iso -m 1024 -net nic -net tap,ifname=tap43,script=no -boot d Change the two network cards, that is testlan moved to eth4, vlan280 moved to eth3 Nothing worked at vlan280 and nothing worked at testlan. We could not get at dhcp working on vlan280 (eth3 - tg3) driver. The bridge setup is as followed, with or without the mac address setup, the result is the same. And I remember to change it when change the bridge_ports. The other 10Gbit interface is used to do drbd and is working without problems. auto vlan280 iface vlan280 inet static address 10.230.80.26 netmask 255.255.255.0 gateway 10.230.80.1 dns-search fcoo.dk dns-nameservers 10.230.80.11 10.230.80.12 bridge_ports eth3 bridge_maxwait 0 bridge_fd 0 bridge_stp off post-up ip link set vlan280 address ac:16:2d:7b:35:4f # # TEST VLAN # auto eth4 iface eth4 inet manual # # TEST VLAN bridge # auto testlan iface testlan inet manual bridge_ports eth4 bridge_maxwait 0 bridge_fd 0 bridge_stp off -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1213887 Title: Bridge does not work i ubuntu 12.04 - kernel 3.5.0-37 Status in “linux” package in Ubuntu: Incomplete Bug description: We are using ganeti on a HP ProLiant DL380p Gen8. We are running kvm as virtualization. Then enable a new ganeti instance, the kernel will make a new network interface (TAPx). After a minut or two, the instance starts to drop packages. Ping is sufficent. We have tried on different network cards on the server, and all fails. Changing to different kernels has not solved the problems. Currently we have 6 ProLiant DL380p Gen7 running on the same configuration with no problems at all. Regards Søren Laursen ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.5.0-37-generic 3.5.0-37.58~precise1 ProcVersionSignature: Ubuntu 3.5.0-37.58~precise1-generic 3.5.7.16 Uname: Linux 3.5.0-37-generic x86_64 AlsaDevices: total 0 crw-rw---T 1 root audio 116, 1 Aug 16 11:08 seq crw-rw---T 1 root audio 116, 33 Aug 16 11:08 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.0.1-0ubuntu17.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Date: Mon Aug 19 13:05:33 2013 HibernationDevice: RESUME=UUID=eb9606b5-5c67-4221-82c4-13d0f88abba9 InstallationMedia: Ubuntu-Server 12.04.2 LTS Precise Pangolin - Release amd64 (20130214) MachineType: HP ProLiant DL380p Gen8 MarkForUpload
[Kernel-packages] [Bug 1213887] Re: Bridge does not work i ubuntu 12.04 - kernel 3.5.0-37
Looks a lot like this bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1013199 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1213887 Title: Bridge does not work i ubuntu 12.04 - kernel 3.5.0-37 Status in “linux” package in Ubuntu: Incomplete Bug description: We are using ganeti on a HP ProLiant DL380p Gen8. We are running kvm as virtualization. Then enable a new ganeti instance, the kernel will make a new network interface (TAPx). After a minut or two, the instance starts to drop packages. Ping is sufficent. We have tried on different network cards on the server, and all fails. Changing to different kernels has not solved the problems. Currently we have 6 ProLiant DL380p Gen7 running on the same configuration with no problems at all. Regards Søren Laursen ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.5.0-37-generic 3.5.0-37.58~precise1 ProcVersionSignature: Ubuntu 3.5.0-37.58~precise1-generic 3.5.7.16 Uname: Linux 3.5.0-37-generic x86_64 AlsaDevices: total 0 crw-rw---T 1 root audio 116, 1 Aug 16 11:08 seq crw-rw---T 1 root audio 116, 33 Aug 16 11:08 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.0.1-0ubuntu17.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Date: Mon Aug 19 13:05:33 2013 HibernationDevice: RESUME=UUID=eb9606b5-5c67-4221-82c4-13d0f88abba9 InstallationMedia: Ubuntu-Server 12.04.2 LTS Precise Pangolin - Release amd64 (20130214) MachineType: HP ProLiant DL380p Gen8 MarkForUpload: True PciMultimedia: ProcEnviron: LANGUAGE=en_GB:en TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-37-generic root=UUID=3a6a448e-8900-4eb5-b203-f5ddd1fbe28d ro RelatedPackageVersions: linux-restricted-modules-3.5.0-37-generic N/A linux-backports-modules-3.5.0-37-generic N/A linux-firmware1.79.6 RfKill: Error: [Errno 2] No such file or directory SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/14/2012 dmi.bios.vendor: HP dmi.bios.version: P70 dmi.chassis.type: 23 dmi.chassis.vendor: HP dmi.modalias: dmi:bvnHP:bvrP70:bd12/14/2012:svnHP:pnProLiantDL380pGen8:pvr:cvnHP:ct23:cvr: dmi.product.name: ProLiant DL380p Gen8 dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1213887/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1213887] Re: Bridge does not work i ubuntu 12.04 - kernel 3.5.0-37
Have tried: Linux kvm07 3.5.0-37-generic #58~precise1-Ubuntu SMP Wed Jul 10 17:48:11 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Linux kvm07 3.10.7-031007-generic #201308150319 SMP Thu Aug 15 07:20:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Linux kvm07 3.11.0-999-generic #201308190423 SMP Mon Aug 19 08:24:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Linux kvm07 3.11.0-031100rc6-generic #201308181835 SMP Sun Aug 18 22:35:54 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux The bridge still fails. However, I have narrowed it a bit down. If you create a simple tap interface for example: sudo tunctl -u root -t tap42 sudo brctl addif mybridte tap42 sudo ip link set tap42 up sudo ip addr add 10.0.0.10 dev tap42 It will continue to work and response to ping etc. If the bridge is created by ganeti/kvm it will fail, if you try to make more than one connection. For example, start a ping and the a ssh connection the network freeze. Regards Søren ** Tags added: kernel-bug-exists-upstream -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1213887 Title: Bridge does not work i ubuntu 12.04 - kernel 3.5.0-37 Status in “linux” package in Ubuntu: Incomplete Bug description: We are using ganeti on a HP ProLiant DL380p Gen8. We are running kvm as virtualization. Then enable a new ganeti instance, the kernel will make a new network interface (TAPx). After a minut or two, the instance starts to drop packages. Ping is sufficent. We have tried on different network cards on the server, and all fails. Changing to different kernels has not solved the problems. Currently we have 6 ProLiant DL380p Gen7 running on the same configuration with no problems at all. Regards Søren Laursen ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.5.0-37-generic 3.5.0-37.58~precise1 ProcVersionSignature: Ubuntu 3.5.0-37.58~precise1-generic 3.5.7.16 Uname: Linux 3.5.0-37-generic x86_64 AlsaDevices: total 0 crw-rw---T 1 root audio 116, 1 Aug 16 11:08 seq crw-rw---T 1 root audio 116, 33 Aug 16 11:08 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.0.1-0ubuntu17.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Date: Mon Aug 19 13:05:33 2013 HibernationDevice: RESUME=UUID=eb9606b5-5c67-4221-82c4-13d0f88abba9 InstallationMedia: Ubuntu-Server 12.04.2 LTS Precise Pangolin - Release amd64 (20130214) MachineType: HP ProLiant DL380p Gen8 MarkForUpload: True PciMultimedia: ProcEnviron: LANGUAGE=en_GB:en TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-37-generic root=UUID=3a6a448e-8900-4eb5-b203-f5ddd1fbe28d ro RelatedPackageVersions: linux-restricted-modules-3.5.0-37-generic N/A linux-backports-modules-3.5.0-37-generic N/A linux-firmware1.79.6 RfKill: Error: [Errno 2] No such file or directory SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/14/2012 dmi.bios.vendor: HP dmi.bios.version: P70 dmi.chassis.type: 23 dmi.chassis.vendor: HP dmi.modalias: dmi:bvnHP:bvrP70:bd12/14/2012:svnHP:pnProLiantDL380pGen8:pvr:cvnHP:ct23:cvr: dmi.product.name: ProLiant DL380p Gen8 dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1213887/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1213887] [NEW] Bridge does not work i ubuntu 12.04 - kernel 3.5.0-37
Public bug reported: We are using ganeti on a HP ProLiant DL380p Gen8. We are running kvm as virtualization. Then enable a new ganeti instance, the kernel will make a new network interface (TAPx). After a minut or two, the instance starts to drop packages. Ping is sufficent. We have tried on different network cards on the server, and all fails. Changing to different kernels has not solved the problems. Currently we have 6 ProLiant DL380p Gen7 running on the same configuration with no problems at all. Regards Søren Laursen ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.5.0-37-generic 3.5.0-37.58~precise1 ProcVersionSignature: Ubuntu 3.5.0-37.58~precise1-generic 3.5.7.16 Uname: Linux 3.5.0-37-generic x86_64 AlsaDevices: total 0 crw-rw---T 1 root audio 116, 1 Aug 16 11:08 seq crw-rw---T 1 root audio 116, 33 Aug 16 11:08 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.0.1-0ubuntu17.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Date: Mon Aug 19 13:05:33 2013 HibernationDevice: RESUME=UUID=eb9606b5-5c67-4221-82c4-13d0f88abba9 InstallationMedia: Ubuntu-Server 12.04.2 LTS Precise Pangolin - Release amd64 (20130214) MachineType: HP ProLiant DL380p Gen8 MarkForUpload: True PciMultimedia: ProcEnviron: LANGUAGE=en_GB:en TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-37-generic root=UUID=3a6a448e-8900-4eb5-b203-f5ddd1fbe28d ro RelatedPackageVersions: linux-restricted-modules-3.5.0-37-generic N/A linux-backports-modules-3.5.0-37-generic N/A linux-firmware1.79.6 RfKill: Error: [Errno 2] No such file or directory SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/14/2012 dmi.bios.vendor: HP dmi.bios.version: P70 dmi.chassis.type: 23 dmi.chassis.vendor: HP dmi.modalias: dmi:bvnHP:bvrP70:bd12/14/2012:svnHP:pnProLiantDL380pGen8:pvr:cvnHP:ct23:cvr: dmi.product.name: ProLiant DL380p Gen8 dmi.sys.vendor: HP ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug precise qa-kernel-lts-testing -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1213887 Title: Bridge does not work i ubuntu 12.04 - kernel 3.5.0-37 Status in “linux” package in Ubuntu: New Bug description: We are using ganeti on a HP ProLiant DL380p Gen8. We are running kvm as virtualization. Then enable a new ganeti instance, the kernel will make a new network interface (TAPx). After a minut or two, the instance starts to drop packages. Ping is sufficent. We have tried on different network cards on the server, and all fails. Changing to different kernels has not solved the problems. Currently we have 6 ProLiant DL380p Gen7 running on the same configuration with no problems at all. Regards Søren Laursen ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.5.0-37-generic 3.5.0-37.58~precise1 ProcVersionSignature: Ubuntu 3.5.0-37.58~precise1-generic 3.5.7.16 Uname: Linux 3.5.0-37-generic x86_64 AlsaDevices: total 0 crw-rw---T 1 root audio 116, 1 Aug 16 11:08 seq crw-rw---T 1 root audio 116, 33 Aug 16 11:08 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.0.1-0ubuntu17.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Date: Mon Aug 19 13:05:33 2013 HibernationDevice: RESUME=UUID=eb9606b5-5c67-4221-82c4-13d0f88abba9 InstallationMedia: Ubuntu-Server 12.04.2 LTS Precise Pangolin - Release amd64 (20130214) MachineType: HP ProLiant DL380p Gen8 MarkForUpload: True PciMultimedia: ProcEnviron: LANGUAGE=en_GB:en TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-37-generic root=UUID=3a6a448e-8900-4eb5-b203-f5ddd1fbe28d ro RelatedPackageVersions: linux-restricted-modules-3.5.0-37-generic N/A linux-backports-modules-3.5.0-37-generic N/A linux-firmware1.79.6 RfKill: Error: [Errno 2] No such file or directory SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/14/2012 dmi.bios.vendor: HP dmi.bios.version: P70 dmi.chassis.type: 23 dmi.chassis.vendor: HP dmi.modalias: dmi:bvnHP:bvrP70:bd12/14/2012:svnHP:pnProLiantDL380pGen8:pvr:cvnHP:ct23:cvr: dmi.product.name