[Kernel-packages] [Bug 2063983] Re: 24.04 Upgrade/Fresh Install results in black screen on reboot on AMDGPU system
I had the same issue while trying to upgrade to Kubuntu 24.04 or install Kubuntu 24.04 from scratch. I get a black screen at startup. My graphic card is also an AMD GPU : Radeon RX 7800 XT. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2063983 Title: 24.04 Upgrade/Fresh Install results in black screen on reboot on AMDGPU system Status in linux package in Ubuntu: Confirmed Bug description: Config: Ryzen 5 5600X with Radeon 6800 XT GPU, a Navi21 card. Using xUbuntu. I had been daily driving the 24.04 nightly iso since March. About a week ago, I took a kernel update via apt and rebooted. The result was that the system would hard freeze to a black screen after the initial kernel messages cleared from the screen. Ctrl-Alt-Del did nothing, switching terminals (ctrl-alt-f#) did nothing, had to hard power off to regain control of the system. I tried various fixes, none of which permanently stuck. This includes nomodeset in grub, rebooting into safe mode, checking for proprietary drivers. Safe mode allowed me to reboot once more into desktop, but then any subsequent reboots would result in a black screen lockup. Suspending while able to use the desktop before reboot would cause a black screen lockup did not seem to cause any issues. 3 days before 24.04 was officially released, I reflashed the most recent installer iso to my thumbdrive, copied my home folder to my RAID and did a full wipe and fresh install. First reboot after installation always went to the desktop. Subsequent reboots always resulted in a black screen lockup. Memtest cleared without errors. Again tried various fixes, nomodeset, safe mode, drivers. The only consistency was that regardless of what I could do to regain control or what I did differently when doing a wipe and reinstall, I would always reboot to a black screen. Once 24.04 was officially released, I again did a full wipe and reinstall and encountered all of the above same issues as before. After mentioning this in #ubuntu on libera, someone suggested a kernel downgrade. 24.04 as installed was using 6.8.0-31.31 Using Mainline, I downgraded to the next minor version below 6.8 that was considered stable. 6.7.10 Problem went away. No more black screen on boot, no more hard power offs required to be able to use my system again, no suspend issues. Was not necessary for me to do anything else to maintain a consistent successful reboot to desktop. Did yet another full wipe and fresh install of 24.04, only installing Mainline upon first reboot to install 6.7.10, using Grub Customizer to edit the default grub option to boot the 6.7.10 kernel instead. No issues. I apologise that I did not collect logs during this process. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2063983/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1521173] Re: AER: Corrected error received: id=00e0
** Attachment added: "outputs_AER_errors" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1521173/+attachment/5751174/+files/outputs_AER_errors -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1521173 Title: AER: Corrected error received: id=00e0 Status in Linux: Unknown Status in linux package in Ubuntu: Triaged Status in linux source package in Xenial: Triaged Bug description: WORKAROUND: add pci=noaer to your kernel command line: 1) edit /etc/default/grub and and add pci=noaer to the line starting with GRUB_CMDLINE_LINUX_DEFAULT. It will look like this: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash pci=noaer" 2) run "sudo update-grub" 3) reboot My dmesg gets completely spammed with the following messages appearing over and over again. It stops after one s3 cycle; it only happens after reboot. [ 5315.986588] pcieport :00:1c.0: AER: Corrected error received: id=00e0 [ 5315.987249] pcieport :00:1c.0: can't find device of ID00e0 [ 5315.995632] pcieport :00:1c.0: AER: Corrected error received: id=00e0 [ 5315.995664] pcieport :00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 5315.995674] pcieport :00:1c.0: device [8086:9d14] error status/mask=0001/2000 [ 5315.995683] pcieport :00:1c.0:[ 0] Receiver Error [ 5316.002772] pcieport :00:1c.0: AER: Corrected error received: id=00e0 [ 5316.002811] pcieport :00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 5316.002826] pcieport :00:1c.0: device [8086:9d14] error status/mask=0001/2000 [ 5316.002838] pcieport :00:1c.0:[ 0] Receiver Error [ 5316.009926] pcieport :00:1c.0: AER: Corrected error received: id=00e0 [ 5316.009964] pcieport :00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 5316.009979] pcieport :00:1c.0: device [8086:9d14] error status/mask=0001/2000 [ 5316.009991] pcieport :00:1c.0:[ 0] Receiver Error ProblemType: BugDistroRelease: Ubuntu 16.04 Package: linux-image-4.2.0-19-generic 4.2.0-19.23 [modified: boot/vmlinuz-4.2.0-19-generic] ProcVersionSignature: Ubuntu 4.2.0-19.23-generic 4.2.6 Uname: Linux 4.2.0-19-generic x86_64 ApportVersion: 2.19.2-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC0D0c: david 1502 F...m pulseaudio /dev/snd/controlC0: david 1502 F pulseaudio CurrentDesktop: Unity Date: Mon Nov 30 13:19:00 2015 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=fe528b90-b4eb-4a20-82bd-6a03b79cfb14 InstallationDate: Installed on 2015-11-28 (2 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Alpha amd64 (20151127) MachineType: Dell Inc. Inspiron 13-7359 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-19-generic.efi.signed root=UUID=94d54f88-5d18-4e2b-960a-8717d6e618bb ro noprompt persistent quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.2.0-19-generic N/A linux-backports-modules-4.2.0-19-generic N/A linux-firmware1.153SourcePackage: linux UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/07/2015 dmi.bios.vendor: Dell Inc. dmi.bios.version: 01.00.00 dmi.board.name: 0NT3WX dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr01.00.00:bd08/07/2015:svnDellInc.:pnInspiron13-7359:pvr:rvnDellInc.:rn0NT3WX:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Inspiron 13-7359 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1521173/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1521173] Re: AER: Corrected error received: id=00e0
Hi there ! Same errors are spamming my logs, and my console... (Nearly) Fresh install on a Ubuntu server 22.04.4 LTS, motherboard Asus Pro Q670M-C-CSM. Kernel is 5.15.0-97-generic The "pci=noaer" grub patch does the job, but I’d rather not put the dust under the carpet ;-) Output of dmesg and lspci -vv attached if it could help. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1521173 Title: AER: Corrected error received: id=00e0 Status in Linux: Unknown Status in linux package in Ubuntu: Triaged Status in linux source package in Xenial: Triaged Bug description: WORKAROUND: add pci=noaer to your kernel command line: 1) edit /etc/default/grub and and add pci=noaer to the line starting with GRUB_CMDLINE_LINUX_DEFAULT. It will look like this: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash pci=noaer" 2) run "sudo update-grub" 3) reboot My dmesg gets completely spammed with the following messages appearing over and over again. It stops after one s3 cycle; it only happens after reboot. [ 5315.986588] pcieport :00:1c.0: AER: Corrected error received: id=00e0 [ 5315.987249] pcieport :00:1c.0: can't find device of ID00e0 [ 5315.995632] pcieport :00:1c.0: AER: Corrected error received: id=00e0 [ 5315.995664] pcieport :00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 5315.995674] pcieport :00:1c.0: device [8086:9d14] error status/mask=0001/2000 [ 5315.995683] pcieport :00:1c.0:[ 0] Receiver Error [ 5316.002772] pcieport :00:1c.0: AER: Corrected error received: id=00e0 [ 5316.002811] pcieport :00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 5316.002826] pcieport :00:1c.0: device [8086:9d14] error status/mask=0001/2000 [ 5316.002838] pcieport :00:1c.0:[ 0] Receiver Error [ 5316.009926] pcieport :00:1c.0: AER: Corrected error received: id=00e0 [ 5316.009964] pcieport :00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 5316.009979] pcieport :00:1c.0: device [8086:9d14] error status/mask=0001/2000 [ 5316.009991] pcieport :00:1c.0:[ 0] Receiver Error ProblemType: BugDistroRelease: Ubuntu 16.04 Package: linux-image-4.2.0-19-generic 4.2.0-19.23 [modified: boot/vmlinuz-4.2.0-19-generic] ProcVersionSignature: Ubuntu 4.2.0-19.23-generic 4.2.6 Uname: Linux 4.2.0-19-generic x86_64 ApportVersion: 2.19.2-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC0D0c: david 1502 F...m pulseaudio /dev/snd/controlC0: david 1502 F pulseaudio CurrentDesktop: Unity Date: Mon Nov 30 13:19:00 2015 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=fe528b90-b4eb-4a20-82bd-6a03b79cfb14 InstallationDate: Installed on 2015-11-28 (2 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Alpha amd64 (20151127) MachineType: Dell Inc. Inspiron 13-7359 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-19-generic.efi.signed root=UUID=94d54f88-5d18-4e2b-960a-8717d6e618bb ro noprompt persistent quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.2.0-19-generic N/A linux-backports-modules-4.2.0-19-generic N/A linux-firmware1.153SourcePackage: linux UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/07/2015 dmi.bios.vendor: Dell Inc. dmi.bios.version: 01.00.00 dmi.board.name: 0NT3WX dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr01.00.00:bd08/07/2015:svnDellInc.:pnInspiron13-7359:pvr:rvnDellInc.:rn0NT3WX:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Inspiron 13-7359 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1521173/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2054560] Re: Xorg freeze: i915 flips and commits are timing out
Hi Daniel, thank you for your advice : in fact, moving to Wayland seems to solve the issue. However, I am not ready to switch to Wayland because it has some annoying side effects : a few application/functionalities that I use on a daily basis work differently or not with wayland. I have realized also that with x.org, there is no freeze when using PowerSave mode (might be related to the log you mentioned in your last post). I will try to stay on kernel 6.2 or 6.5 with PowerSave mode for now. Thank you for your help. For my concern this issue can be closed. Xavier -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-hwe-6.5 in Ubuntu. https://bugs.launchpad.net/bugs/2054560 Title: Xorg freeze: i915 flips and commits are timing out Status in linux-hwe-6.5 package in Ubuntu: Incomplete Bug description: Random freezes occur since the installation of 6.5.x kernel. Freeze occur several times a day, probably after touching the mouse or keyboard, but I'm not sure. App continue to work sound is OK, there is just no dispay updated. Booting to old 6.2 kernel solves the problem. I have tried all 6.5 updates since the first released, but each time, I had a freeze after a few hours. Example of last mesg in dmesg when freeze occur : Feb 21 11:03:59 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:04:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:04:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:04:51 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:05:01 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:01 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:05:12 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:12 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:274:DP-5] commit wait timed out Feb 21 11:05:22 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:05:32 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:32 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:05:42 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:42 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:274:DP-5] commit wait timed out Feb 21 11:05:53 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:06:03 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:06:03 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:06:13 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:06:13 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:274:DP-5] commit wait timed out Feb 21 11:06:23 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out or : Feb 13 10:37:18 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 10:39:06 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 10:39:06 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 13 11:22:09 pf46avw7 kernel: perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 Feb 13 11:35:00 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 11:35:10 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:10 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 13 11:35:21 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:21 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:282:DP-5] commit wait timed out Feb 13 11:35:31 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 11:35:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 13 11:35:51 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:51 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:282:DP-5] commit wait timed out Feb 13 11:36:01 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 11:36:12 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:36:12 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:
[Kernel-packages] [Bug 2054560] Re: Xorg freeze: i915 flips and commits are timing out
Hi Daniel, Thank you for your quick reply. I will try that and post here the results. All the best Xavier -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-hwe-6.5 in Ubuntu. https://bugs.launchpad.net/bugs/2054560 Title: Xorg freeze: i915 flips and commits are timing out Status in linux-hwe-6.5 package in Ubuntu: Incomplete Bug description: Random freezes occur since the installation of 6.5.x kernel. Freeze occur several times a day, probably after touching the mouse or keyboard, but I'm not sure. App continue to work sound is OK, there is just no dispay updated. Booting to old 6.2 kernel solves the problem. I have tried all 6.5 updates since the first released, but each time, I had a freeze after a few hours. Example of last mesg in dmesg when freeze occur : Feb 21 11:03:59 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:04:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:04:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:04:51 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:05:01 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:01 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:05:12 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:12 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:274:DP-5] commit wait timed out Feb 21 11:05:22 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:05:32 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:32 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:05:42 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:42 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:274:DP-5] commit wait timed out Feb 21 11:05:53 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:06:03 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:06:03 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:06:13 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:06:13 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:274:DP-5] commit wait timed out Feb 21 11:06:23 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out or : Feb 13 10:37:18 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 10:39:06 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 10:39:06 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 13 11:22:09 pf46avw7 kernel: perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 Feb 13 11:35:00 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 11:35:10 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:10 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 13 11:35:21 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:21 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:282:DP-5] commit wait timed out Feb 13 11:35:31 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 11:35:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 13 11:35:51 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:51 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:282:DP-5] commit wait timed out Feb 13 11:36:01 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 11:36:12 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:36:12 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 13 11:36:22 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:36:22 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:282:DP-5] commit wait timed out Feb 13 11:36:32 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 11:37:42 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:37:42 pf46avw7 kernel: i915 0
[Kernel-packages] [Bug 2054560] Re: Xorg freeze: i915 flips and commits are timing out
Here is the journal of a previous crash with kernel 6.5.0-15. I have reproduced this behaviour with all versions of kernels 6.5 I am currently booting kernel 6.2 and switch to 6.5 whenever there is a new release to test, so I dont have other fresh traces, but if you need more, I can boot in 6.5 and wait for new freezes to collect logs. Also, it might be possible that freezes often occured when using zoom client (but not every time) and moving mouse or typing keyboard. Xavier ** Attachment added: "other.txt" https://bugs.launchpad.net/ubuntu/+source/linux-hwe-6.5/+bug/2054560/+attachment/5748483/+files/other.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-hwe-6.5 in Ubuntu. https://bugs.launchpad.net/bugs/2054560 Title: Xorg freeze: i915 flips and commits are timing out Status in linux-hwe-6.5 package in Ubuntu: Incomplete Bug description: Random freezes occur since the installation of 6.5.x kernel. Freeze occur several times a day, probably after touching the mouse or keyboard, but I'm not sure. App continue to work sound is OK, there is just no dispay updated. Booting to old 6.2 kernel solves the problem. I have tried all 6.5 updates since the first released, but each time, I had a freeze after a few hours. Example of last mesg in dmesg when freeze occur : Feb 21 11:03:59 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:04:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:04:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:04:51 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:05:01 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:01 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:05:12 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:12 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:274:DP-5] commit wait timed out Feb 21 11:05:22 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:05:32 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:32 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:05:42 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:42 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:274:DP-5] commit wait timed out Feb 21 11:05:53 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:06:03 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:06:03 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:06:13 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:06:13 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:274:DP-5] commit wait timed out Feb 21 11:06:23 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out or : Feb 13 10:37:18 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 10:39:06 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 10:39:06 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 13 11:22:09 pf46avw7 kernel: perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 Feb 13 11:35:00 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 11:35:10 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:10 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 13 11:35:21 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:21 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:282:DP-5] commit wait timed out Feb 13 11:35:31 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 11:35:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 13 11:35:51 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:51 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:282:DP-5] commit wait timed out Feb 13 11:36:01 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 11:36:12 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:3
[Kernel-packages] [Bug 2054560] Re: Xorg freeze: i915 flips and commits are timing out
Here is journal of an affected session from boot to freeze. ** Attachment added: "prevboot.txt" https://bugs.launchpad.net/ubuntu/+source/linux-hwe-6.5/+bug/2054560/+attachment/5748480/+files/prevboot.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-hwe-6.5 in Ubuntu. https://bugs.launchpad.net/bugs/2054560 Title: Xorg freeze: i915 flips and commits are timing out Status in linux-hwe-6.5 package in Ubuntu: Incomplete Bug description: Random freezes occur since the installation of 6.5.x kernel. Freeze occur several times a day, probably after touching the mouse or keyboard, but I'm not sure. App continue to work sound is OK, there is just no dispay updated. Booting to old 6.2 kernel solves the problem. I have tried all 6.5 updates since the first released, but each time, I had a freeze after a few hours. Example of last mesg in dmesg when freeze occur : Feb 21 11:03:59 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:04:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:04:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:04:51 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:05:01 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:01 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:05:12 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:12 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:274:DP-5] commit wait timed out Feb 21 11:05:22 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:05:32 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:32 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:05:42 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:05:42 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:274:DP-5] commit wait timed out Feb 21 11:05:53 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 21 11:06:03 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:06:03 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 21 11:06:13 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 21 11:06:13 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:274:DP-5] commit wait timed out Feb 21 11:06:23 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out or : Feb 13 10:37:18 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 10:39:06 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 10:39:06 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 13 11:22:09 pf46avw7 kernel: perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 Feb 13 11:35:00 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 11:35:10 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:10 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 13 11:35:21 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:21 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:282:DP-5] commit wait timed out Feb 13 11:35:31 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 11:35:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:41 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 13 11:35:51 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:35:51 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:282:DP-5] commit wait timed out Feb 13 11:36:01 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 11:36:12 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:36:12 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] commit wait timed out Feb 13 11:36:22 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* flip_done timed out Feb 13 11:36:22 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CONNECTOR:282:DP-5] commit wait timed out Feb 13 11:36:32 pf46avw7 kernel: i915 :00:02.0: [drm] *ERROR* [CRTC:131:pipe B] flip_done timed out Feb 13 11:37:42 pf46avw7
[Kernel-packages] [Bug 2017980] Re: Chrome crashes with FATAL:credentials.cc(127)] Check failed: . : Permission denied (13)
Hello everyone, I'm still a beginner, to see if I understood, any program that generates this error if I put "--no-sandbox" will it work? Are we going to have to keep using it like this until an update comes out or is there already something to do? Can anybody help me :) Sincerely, Jecé Xavier. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-meta-nvidia-5.19 in Ubuntu. https://bugs.launchpad.net/bugs/2017980 Title: Chrome crashes with FATAL:credentials.cc(127)] Check failed: . : Permission denied (13) Status in linux-meta-nvidia-5.19 package in Ubuntu: Confirmed Bug description: With this kernel linux-image-nvidia-5.19 (version 5.19.0.1009.10) I experience that google-chrome crashes. It shows ```shell [11849:11849:0428/091628.955956:FATAL:credentials.cc(127)] Check failed: . : Permission denied (13) Trace/breakpoint trap (core dumped)". ``` To be honest I don't think it has anything to do with google-chrome at all. When google-chrome starts it (normally) request the system key-manager (KWallet in my case) for access to the users keys before it actually shows anything from chrome. Not even that part (the KWallet password box) shows up. I can only reproduce this problem with this specific kernel. It should be possible to take google-chrome out of the equation by using another application that starts by request the desktop key manager for access. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-nvidia-5.19 (not installed) ProcVersionSignature: Ubuntu 5.15.0-1023.23-nvidia 5.15.92 Uname: Linux 5.15.0-1023-nvidia x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.4 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: KDE Date: Fri Apr 28 11:23:23 2023 InstallationDate: Installed on 2016-01-08 (2666 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) SourcePackage: linux-meta-nvidia-5.19 UpgradeStatus: Upgraded to jammy on 2022-07-21 (281 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-meta-nvidia-5.19/+bug/2017980/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1990851] Re: Unable to boot 5.19.0-18 with modeset
*** This bug is a duplicate of bug 1991704 *** https://bugs.launchpad.net/bugs/1991704 ** This bug has been marked a duplicate of bug 1991704 Kinetic kernels 5.19.0-18/19-generic won't boot on Intel 11th/12th gen -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1990851 Title: Unable to boot 5.19.0-18 with modeset Status in linux package in Ubuntu: Confirmed Bug description: After upgrade to `linux-image-5.19.0-18-generic`, system seems freeze during the boot. Boot to earlier 5.19 kernel, looks fine. And 5.19.0-18 with `nomodeset` also works. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: linux-image-5.19.0-18-generic 5.19.0-18.18 ProcVersionSignature: Ubuntu 5.19.0-18.18-generic 5.19.7 Uname: Linux 5.19.0-18-generic x86_64 ApportVersion: 2.23.0-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: gdm2004 F pipewire gdm2008 F wireplumber /dev/snd/controlC0: gdm2008 F wireplumber CasperMD5CheckResult: unknown Date: Mon Sep 26 21:25:44 2022 MachineType: LENOVO 82TF ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.19.0-18-generic root=/dev/mapper/vgroot-lvroot ro recovery nomodeset dis_ucode_ldr PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.19.0-18-generic N/A linux-backports-modules-5.19.0-18-generic N/A linux-firmware 20220923.gitf09bebf3-0ubuntu1 SourcePackage: linux UpgradeStatus: Upgraded to kinetic on 2022-09-07 (19 days ago) dmi.bios.date: 06/16/2022 dmi.bios.release: 1.39 dmi.bios.vendor: LENOVO dmi.bios.version: JYCN39WW dmi.board.asset.tag: No Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0T76479WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Legion Y9000X IAH7 dmi.ec.firmware.release: 1.39 dmi.modalias: dmi:bvnLENOVO:bvrJYCN39WW:bd06/16/2022:br1.39:efr1.39:svnLENOVO:pn82TF:pvrLegionY9000XIAH7:rvnLENOVO:rnLNVNB161216:rvrSDK0T76479WIN:cvnLENOVO:ct10:cvrLegionY9000XIAH7:skuLENOVO_MT_82TF_BU_idea_FM_LegionY9000XIAH7: dmi.product.family: Legion Y9000X IAH7 dmi.product.name: 82TF dmi.product.sku: LENOVO_MT_82TF_BU_idea_FM_Legion Y9000X IAH7 dmi.product.version: Legion Y9000X IAH7 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1990851/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1992126] [NEW] Kernel Oops: kernel NULL pointer dereference; RIP is at 0010:tgl_get_bw_info.isra.0+0x473/0x6c0 [i915]
Public bug reported: `linux-image-5.19.0-16-generic` looks fine; === [1.699774] i915 :00:02.0: [drm] VT-d active for gfx access [1.699828] Console: switching to colour dummy device 80x25 [1.699851] i915 :00:02.0: vgaarb: deactivate vga console [1.699884] i915 :00:02.0: [drm] Transparent Hugepage mode 'huge=within_size' [1.699966] BUG: kernel NULL pointer dereference, address: 002e [1.699969] #PF: supervisor write access in kernel mode [1.699971] #PF: error_code(0x0002) - not-present page [1.699972] PGD 0 P4D 0 [1.699974] Oops: 0002 [#1] PREEMPT SMP NOPTI [1.699976] CPU: 0 PID: 324 Comm: systemd-udevd Not tainted 5.19.0-19-generic #19-Ubuntu [1.699978] Hardware name: LENOVO 82TF/LNVNB161216, BIOS JYCN39WW 06/16/2022 [1.699980] RIP: 0010:tgl_get_bw_info.isra.0+0x473/0x6c0 [i915] [1.700052] Code: fa 0b 0f 86 e7 00 00 00 41 39 c2 0f 8e 77 fc ff ff e9 3a 5c 0f 00 49 8d b5 e4 21 00 00 0f b7 85 30 ff ff ff 8b 8d 4c ff ff ff 46 2e 00 66 41 89 85 e0 21 00 00 85 c9 0f 85 f2 fd ff ff e9 08 [1.700054] RSP: 0018:b92181fe7860 EFLAGS: 00010202 [1.700056] RAX: 0304 RBX: 0003 RCX: 0004 [1.700057] RDX: RSI: RDI: 0001 [1.700058] RBP: b92181fe7950 R08: R09: [1.700059] R10: 0004 R11: 0004 R12: 0080 [1.700061] R13: 9d3a9d8f80f0 R14: 0005 R15: 9d3a9d8f8000 [1.700062] FS: 7f4c6b69e8c0() GS:9d3dff60() knlGS: [1.700064] CS: 0010 DS: ES: CR0: 80050033 [1.700065] CR2: 002e CR3: 000119dce001 CR4: 00770ef0 [1.700066] PKRU: 5554 [1.700067] Call Trace: [1.700068] [1.700070] ? __intel_wait_for_register_fw+0xf5/0x200 [i915] [1.700123] intel_bw_init_hw+0xf3/0x140 [i915] [1.700184] i915_driver_hw_probe+0x2cc/0x370 [i915] [1.700229] i915_driver_probe+0x19b/0x490 [i915] [1.700267] ? drm_privacy_screen_get+0x16d/0x190 [drm] [1.700294] ? acpi_dev_found+0x64/0x80 [1.700299] i915_pci_probe+0x56/0x150 [i915] [1.700339] local_pci_probe+0x44/0x90 [1.700342] pci_call_probe+0x55/0x190 [1.700343] pci_device_probe+0x84/0x120 [1.700345] really_probe+0x1dc/0x3b0 [1.700348] __driver_probe_device+0x12c/0x1b0 [1.700349] driver_probe_device+0x24/0xd0 [1.700351] __driver_attach+0xe0/0x210 [1.700353] ? __device_attach_driver+0x130/0x130 [1.700355] bus_for_each_dev+0x8d/0xe0 [1.700356] driver_attach+0x1e/0x30 [1.700358] bus_add_driver+0x187/0x230 [1.700360] driver_register+0x8f/0x100 [1.700361] __pci_register_driver+0x62/0x70 [1.700363] i915_pci_register_driver+0x23/0x30 [i915] [1.700400] i915_init+0x3b/0xf2 [i915] [1.700449] ? 0xc0877000 [1.700451] do_one_initcall+0x5b/0x240 [1.700454] do_init_module+0x50/0x210 [1.700456] load_module+0xb7d/0xcd0 [1.700459] __do_sys_finit_module+0xc4/0x140 [1.700460] ? __do_sys_finit_module+0xc4/0x140 [1.700462] __x64_sys_finit_module+0x18/0x30 [1.700464] do_syscall_64+0x58/0x90 [1.700466] entry_SYSCALL_64_after_hwframe+0x63/0xcd [1.700469] RIP: 0033:0x7f4c6bd7ea1d [1.700470] Code: 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 f3 0d 00 f7 d8 64 89 01 48 [1.700473] RSP: 002b:7fff8a8b9a88 EFLAGS: 0246 ORIG_RAX: 0139 [1.700475] RAX: ffda RBX: 55649dea3290 RCX: 7f4c6bd7ea1d [1.700476] RDX: RSI: 7f4c6bf00458 RDI: 0016 [1.700477] RBP: 7f4c6bf00458 R08: R09: 7fff8a8b9bb0 [1.700478] R10: 0016 R11: 0246 R12: 0002 [1.700479] R13: 55649de9b8f0 R14: R15: 55649deabad0 [1.700481] [1.700482] Modules linked in: fjes(-) i915(+) drm_buddy i2c_algo_bit ttm drm_display_helper cec rc_core drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops aesni_intel nvme drm crypto_simd xhci_pci cryptd thunderbolt nvme_core xhci_pci_renesas mac_hid wmi video pinctrl_tigerlake [1.700492] CR2: 002e [1.700493] ---[ end trace ]--- [1.700495] RIP: 0010:tgl_get_bw_info.isra.0+0x473/0x6c0 [i915] [1.700554] Code: fa 0b 0f 86 e7 00 00 00 41 39 c2 0f 8e 77 fc ff ff e9 3a 5c 0f 00 49 8d b5 e4 21 00 00 0f b7 85 30 ff ff ff 8b 8d 4c ff ff ff 46 2e 00 66 41 89 85 e0 21 00 00 85 c9 0f 85 f2 fd ff ff e9 08 [1.700556] RSP: 0018:b92181fe7860 EFLAGS: 00010202 [1.700558] RAX: 0304 RBX: 0003 RCX: 0004 [1.700559] RDX: RSI: RDI: 0001 [1.700560] RBP:
[Kernel-packages] [Bug 1990851] Re: Unable to boot 5.19.0-18 with modeset
** Description changed: - After upgrade to `linux-image-5.19.0-18-generic`, system is hang on. + After upgrade to `linux-image-5.19.0-18-generic`, system seems freeze + during the boot. Boot to earlier 5.19 kernel, looks fine. And 5.19.0-18 with `nomodeset` also works. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: linux-image-5.19.0-18-generic 5.19.0-18.18 ProcVersionSignature: Ubuntu 5.19.0-18.18-generic 5.19.7 Uname: Linux 5.19.0-18-generic x86_64 ApportVersion: 2.23.0-0ubuntu2 Architecture: amd64 AudioDevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC1: gdm2004 F pipewire - gdm2008 F wireplumber - /dev/snd/controlC0: gdm2008 F wireplumber + USERPID ACCESS COMMAND + /dev/snd/controlC1: gdm2004 F pipewire + gdm2008 F wireplumber + /dev/snd/controlC0: gdm2008 F wireplumber CasperMD5CheckResult: unknown Date: Mon Sep 26 21:25:44 2022 MachineType: LENOVO 82TF ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.19.0-18-generic root=/dev/mapper/vgroot-lvroot ro recovery nomodeset dis_ucode_ldr PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: - linux-restricted-modules-5.19.0-18-generic N/A - linux-backports-modules-5.19.0-18-generic N/A - linux-firmware 20220923.gitf09bebf3-0ubuntu1 + linux-restricted-modules-5.19.0-18-generic N/A + linux-backports-modules-5.19.0-18-generic N/A + linux-firmware 20220923.gitf09bebf3-0ubuntu1 SourcePackage: linux UpgradeStatus: Upgraded to kinetic on 2022-09-07 (19 days ago) dmi.bios.date: 06/16/2022 dmi.bios.release: 1.39 dmi.bios.vendor: LENOVO dmi.bios.version: JYCN39WW dmi.board.asset.tag: No Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0T76479WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Legion Y9000X IAH7 dmi.ec.firmware.release: 1.39 dmi.modalias: dmi:bvnLENOVO:bvrJYCN39WW:bd06/16/2022:br1.39:efr1.39:svnLENOVO:pn82TF:pvrLegionY9000XIAH7:rvnLENOVO:rnLNVNB161216:rvrSDK0T76479WIN:cvnLENOVO:ct10:cvrLegionY9000XIAH7:skuLENOVO_MT_82TF_BU_idea_FM_LegionY9000XIAH7: dmi.product.family: Legion Y9000X IAH7 dmi.product.name: 82TF dmi.product.sku: LENOVO_MT_82TF_BU_idea_FM_Legion Y9000X IAH7 dmi.product.version: Legion Y9000X IAH7 dmi.sys.vendor: LENOVO -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1990851 Title: Unable to boot 5.19.0-18 with modeset Status in linux package in Ubuntu: Confirmed Bug description: After upgrade to `linux-image-5.19.0-18-generic`, system seems freeze during the boot. Boot to earlier 5.19 kernel, looks fine. And 5.19.0-18 with `nomodeset` also works. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: linux-image-5.19.0-18-generic 5.19.0-18.18 ProcVersionSignature: Ubuntu 5.19.0-18.18-generic 5.19.7 Uname: Linux 5.19.0-18-generic x86_64 ApportVersion: 2.23.0-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: gdm2004 F pipewire gdm2008 F wireplumber /dev/snd/controlC0: gdm2008 F wireplumber CasperMD5CheckResult: unknown Date: Mon Sep 26 21:25:44 2022 MachineType: LENOVO 82TF ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.19.0-18-generic root=/dev/mapper/vgroot-lvroot ro recovery nomodeset dis_ucode_ldr PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.19.0-18-generic N/A linux-backports-modules-5.19.0-18-generic N/A linux-firmware 20220923.gitf09bebf3-0ubuntu1 SourcePackage: linux UpgradeStatus: Upgraded to kinetic on 2022-09-07 (19 days ago) dmi.bios.date: 06/16/2022 dmi.bios.release: 1.39 dmi.bios.vendor: LENOVO dmi.bios.version: JYCN39WW dmi.board.asset.tag: No Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0T76479WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Legion Y9000X IAH7 dmi.ec.firmware.release: 1.39 dmi.modalias: dmi:bvnLENOVO:bvrJYCN39WW:bd06/16/2022:br1.39:efr1.39:svnLENOVO:pn82TF:pvrLegionY9000XIAH7:rvnLENOVO:rnLNVNB161216:rvrSDK0T76479WIN:cvnLENOVO:ct10:cvrLegionY9000XIAH7:skuLENOVO_MT_82TF_BU_idea_FM_LegionY9000XIAH7: dmi.product.family: Legion Y9000X IAH7 dmi.product.name: 82TF dmi.product.sku: LENOVO_MT_82TF_BU_idea_FM_Legion
[Kernel-packages] [Bug 1990851] [NEW] Unable to boot 5.19.0-18 with modeset
Public bug reported: After upgrade to `linux-image-5.19.0-18-generic`, system is hang on. Boot to earlier 5.19 kernel, looks fine. And 5.19.0-18 with `nomodeset` also works. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: linux-image-5.19.0-18-generic 5.19.0-18.18 ProcVersionSignature: Ubuntu 5.19.0-18.18-generic 5.19.7 Uname: Linux 5.19.0-18-generic x86_64 ApportVersion: 2.23.0-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: gdm2004 F pipewire gdm2008 F wireplumber /dev/snd/controlC0: gdm2008 F wireplumber CasperMD5CheckResult: unknown Date: Mon Sep 26 21:25:44 2022 MachineType: LENOVO 82TF ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.19.0-18-generic root=/dev/mapper/vgroot-lvroot ro recovery nomodeset dis_ucode_ldr PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.19.0-18-generic N/A linux-backports-modules-5.19.0-18-generic N/A linux-firmware 20220923.gitf09bebf3-0ubuntu1 SourcePackage: linux UpgradeStatus: Upgraded to kinetic on 2022-09-07 (19 days ago) dmi.bios.date: 06/16/2022 dmi.bios.release: 1.39 dmi.bios.vendor: LENOVO dmi.bios.version: JYCN39WW dmi.board.asset.tag: No Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0T76479WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Legion Y9000X IAH7 dmi.ec.firmware.release: 1.39 dmi.modalias: dmi:bvnLENOVO:bvrJYCN39WW:bd06/16/2022:br1.39:efr1.39:svnLENOVO:pn82TF:pvrLegionY9000XIAH7:rvnLENOVO:rnLNVNB161216:rvrSDK0T76479WIN:cvnLENOVO:ct10:cvrLegionY9000XIAH7:skuLENOVO_MT_82TF_BU_idea_FM_LegionY9000XIAH7: dmi.product.family: Legion Y9000X IAH7 dmi.product.name: 82TF dmi.product.sku: LENOVO_MT_82TF_BU_idea_FM_Legion Y9000X IAH7 dmi.product.version: Legion Y9000X IAH7 dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug kinetic package-from-proposed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1990851 Title: Unable to boot 5.19.0-18 with modeset Status in linux package in Ubuntu: New Bug description: After upgrade to `linux-image-5.19.0-18-generic`, system is hang on. Boot to earlier 5.19 kernel, looks fine. And 5.19.0-18 with `nomodeset` also works. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: linux-image-5.19.0-18-generic 5.19.0-18.18 ProcVersionSignature: Ubuntu 5.19.0-18.18-generic 5.19.7 Uname: Linux 5.19.0-18-generic x86_64 ApportVersion: 2.23.0-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: gdm2004 F pipewire gdm2008 F wireplumber /dev/snd/controlC0: gdm2008 F wireplumber CasperMD5CheckResult: unknown Date: Mon Sep 26 21:25:44 2022 MachineType: LENOVO 82TF ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.19.0-18-generic root=/dev/mapper/vgroot-lvroot ro recovery nomodeset dis_ucode_ldr PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.19.0-18-generic N/A linux-backports-modules-5.19.0-18-generic N/A linux-firmware 20220923.gitf09bebf3-0ubuntu1 SourcePackage: linux UpgradeStatus: Upgraded to kinetic on 2022-09-07 (19 days ago) dmi.bios.date: 06/16/2022 dmi.bios.release: 1.39 dmi.bios.vendor: LENOVO dmi.bios.version: JYCN39WW dmi.board.asset.tag: No Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0T76479WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Legion Y9000X IAH7 dmi.ec.firmware.release: 1.39 dmi.modalias: dmi:bvnLENOVO:bvrJYCN39WW:bd06/16/2022:br1.39:efr1.39:svnLENOVO:pn82TF:pvrLegionY9000XIAH7:rvnLENOVO:rnLNVNB161216:rvrSDK0T76479WIN:cvnLENOVO:ct10:cvrLegionY9000XIAH7:skuLENOVO_MT_82TF_BU_idea_FM_LegionY9000XIAH7: dmi.product.family: Legion Y9000X IAH7 dmi.product.name: 82TF dmi.product.sku: LENOVO_MT_82TF_BU_idea_FM_Legion Y9000X IAH7 dmi.product.version: Legion Y9000X IAH7 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1990851/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1931715] Re: [Lenovo Ideapad S145 82DJ0001BR] touchpad not working - does not appear on "cat /proc/bus/input/devices"
So is there something I can do right now? I did not understand very well if there's already a updated fix I can try. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1931715 Title: [Lenovo Ideapad S145 82DJ0001BR] touchpad not working - does not appear on "cat /proc/bus/input/devices" Status in linux package in Ubuntu: Confirmed Bug description: Laptop model: Lenovo Ideapad S145 82DJ0001BR Manufacturer of the Touchpad: Elan, Synaptics When the symptom first appeared: At the time I installed Ubuntu on my notebook (dual-boot) - it works fine on Windows. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.8.0-55-generic 5.8.0-55.62~20.04.1 ProcVersionSignature: Ubuntu 5.8.0-55.62~20.04.1-generic 5.8.18 Uname: Linux 5.8.0-55-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.18 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Fri Jun 11 11:58:39 2021 InstallationDate: Installed on 2021-06-09 (1 days ago) InstallationMedia: Ubuntu 20.04.2.0 LTS "Focal Fossa" - Release amd64 (20210209.1) SourcePackage: linux-signed-hwe-5.8 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931715/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1931715] Re: [Lenovo Ideapad S145 82DJ0001BR] touchpad not working - does not appear on "cat /proc/bus/input/devices"
No, I'm using Ubuntu 20.04.4 LTS. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1931715 Title: [Lenovo Ideapad S145 82DJ0001BR] touchpad not working - does not appear on "cat /proc/bus/input/devices" Status in linux package in Ubuntu: Confirmed Bug description: Laptop model: Lenovo Ideapad S145 82DJ0001BR Manufacturer of the Touchpad: Elan, Synaptics When the symptom first appeared: At the time I installed Ubuntu on my notebook (dual-boot) - it works fine on Windows. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.8.0-55-generic 5.8.0-55.62~20.04.1 ProcVersionSignature: Ubuntu 5.8.0-55.62~20.04.1-generic 5.8.18 Uname: Linux 5.8.0-55-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.18 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Fri Jun 11 11:58:39 2021 InstallationDate: Installed on 2021-06-09 (1 days ago) InstallationMedia: Ubuntu 20.04.2.0 LTS "Focal Fossa" - Release amd64 (20210209.1) SourcePackage: linux-signed-hwe-5.8 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931715/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1931715] Re: [Lenovo Ideapad S145 82DJ0001BR] touchpad not working - does not appear on "cat /proc/bus/input/devices"
Hey, how can I try this test kernel (5.18.0-3)? I've downloaded the three files in the link above but I can't install any of them, I'm always receiving the "unmet dependencies" warning. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1931715 Title: [Lenovo Ideapad S145 82DJ0001BR] touchpad not working - does not appear on "cat /proc/bus/input/devices" Status in linux package in Ubuntu: Confirmed Bug description: Laptop model: Lenovo Ideapad S145 82DJ0001BR Manufacturer of the Touchpad: Elan, Synaptics When the symptom first appeared: At the time I installed Ubuntu on my notebook (dual-boot) - it works fine on Windows. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.8.0-55-generic 5.8.0-55.62~20.04.1 ProcVersionSignature: Ubuntu 5.8.0-55.62~20.04.1-generic 5.8.18 Uname: Linux 5.8.0-55-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.18 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Fri Jun 11 11:58:39 2021 InstallationDate: Installed on 2021-06-09 (1 days ago) InstallationMedia: Ubuntu 20.04.2.0 LTS "Focal Fossa" - Release amd64 (20210209.1) SourcePackage: linux-signed-hwe-5.8 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931715/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1955845] Re: i915 0000:00:02.0: [drm] GPU HANG: ecode 12:1:859ffffb, in gnome-shell
apport information ** Tags added: apport-collected impish ** Description changed: i915 driver problem I get constant GPU HANGS which render de computer unusable. The only solution I have found is to boot with the nomodeset flag, but this prevents the HDMI port from working. I'm using Ubuntu 21.10 Kernel 5.16.0rc6 (same problem with all other pervious kernels) Linux squid 5.16.0-051600rc6-generic #202112192330 SMP PREEMPT Sun Dec 19 23:34:42 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu71 + Architecture: amd64 + CasperMD5CheckResult: unknown + CurrentDesktop: ubuntu:GNOME + DistroRelease: Ubuntu 21.10 + InstallationDate: Installed on 2021-11-23 (35 days ago) + InstallationMedia: Ubuntu 18.04.6 LTS "Bionic Beaver" - Release amd64 (20210915) + Package: linux (not installed) + Tags: impish + Uname: Linux 5.16.0-051600rc6-generic x86_64 + UnreportableReason: The running kernel is not an Ubuntu kernel + UpgradeStatus: Upgraded to impish on 2021-11-29 (29 days ago) + UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo + _MarkForUpload: True ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1955845/+attachment/5550291/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1955845 Title: i915 :00:02.0: [drm] GPU HANG: ecode 12:1:859b, in gnome-shell Status in linux package in Ubuntu: Confirmed Bug description: i915 driver problem I get constant GPU HANGS which render de computer unusable. The only solution I have found is to boot with the nomodeset flag, but this prevents the HDMI port from working. I'm using Ubuntu 21.10 Kernel 5.16.0rc6 (same problem with all other pervious kernels) Linux squid 5.16.0-051600rc6-generic #202112192330 SMP PREEMPT Sun Dec 19 23:34:42 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu71 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 21.10 InstallationDate: Installed on 2021-11-23 (35 days ago) InstallationMedia: Ubuntu 18.04.6 LTS "Bionic Beaver" - Release amd64 (20210915) Package: linux (not installed) Tags: impish Uname: Linux 5.16.0-051600rc6-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to impish on 2021-11-29 (29 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1955845/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1955845] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1955845/+attachment/5550292/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1955845 Title: i915 :00:02.0: [drm] GPU HANG: ecode 12:1:859b, in gnome-shell Status in linux package in Ubuntu: Confirmed Bug description: i915 driver problem I get constant GPU HANGS which render de computer unusable. The only solution I have found is to boot with the nomodeset flag, but this prevents the HDMI port from working. I'm using Ubuntu 21.10 Kernel 5.16.0rc6 (same problem with all other pervious kernels) Linux squid 5.16.0-051600rc6-generic #202112192330 SMP PREEMPT Sun Dec 19 23:34:42 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu71 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 21.10 InstallationDate: Installed on 2021-11-23 (35 days ago) InstallationMedia: Ubuntu 18.04.6 LTS "Bionic Beaver" - Release amd64 (20210915) Package: linux (not installed) Tags: impish Uname: Linux 5.16.0-051600rc6-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to impish on 2021-11-29 (29 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1955845/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1955845] Re: i915 0000:00:02.0: [drm] GPU HANG: ecode 12:1:859ffffb, in gnome-shell
I'm available to perform any test required and provide further information -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1955845 Title: i915 :00:02.0: [drm] GPU HANG: ecode 12:1:859b, in gnome-shell Status in linux package in Ubuntu: Confirmed Bug description: i915 driver problem I get constant GPU HANGS which render de computer unusable. The only solution I have found is to boot with the nomodeset flag, but this prevents the HDMI port from working. I'm using Ubuntu 21.10 Kernel 5.16.0rc6 (same problem with all other pervious kernels) Linux squid 5.16.0-051600rc6-generic #202112192330 SMP PREEMPT Sun Dec 19 23:34:42 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1955845/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1955845] Re: i915 0000:00:02.0: [drm] GPU HANG: ecode 12:1:859ffffb, in gnome-shell
Relevant log files are in attachment. ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1955845 Title: i915 :00:02.0: [drm] GPU HANG: ecode 12:1:859b, in gnome-shell Status in linux package in Ubuntu: Confirmed Bug description: i915 driver problem I get constant GPU HANGS which render de computer unusable. The only solution I have found is to boot with the nomodeset flag, but this prevents the HDMI port from working. I'm using Ubuntu 21.10 Kernel 5.16.0rc6 (same problem with all other pervious kernels) Linux squid 5.16.0-051600rc6-generic #202112192330 SMP PREEMPT Sun Dec 19 23:34:42 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1955845/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1881757] Re: webcam is detected but not working with kernel 5.4.0.33
** Changed in: linux-signed (Ubuntu) Assignee: (unassigned) => Xavier (xavier69) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-signed in Ubuntu. https://bugs.launchpad.net/bugs/1881757 Title: webcam is detected but not working with kernel 5.4.0.33 Status in linux-signed package in Ubuntu: Fix Released Bug description: webcam is detected not working under kernel 5.4.0.33 and 5.4.0.31 . The webcam is functional with kernels 5.0 and 5.6.15 . -usb:1 description: Video product: USB 2.0 Web Camera vendor: Alcor Micro, Corp. physical id: 2 bus info: usb@1:1.2 version: 0.08 capabilities: usb-2.00 configuration: driver=uvcvideo maxpower=200mA speed=480Mbit/s susb; lsb_release -a; uname -a Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 1d0b:0021 HAN HUA CABLE & WIRE TECHNOLOGY (J.X.) CO., LTD. Bus 001 Device 003: ID 058f:5608 Alcor Micro Corp. Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux afsal-Excelance 5.4.0-33-generic #37-Ubuntu SMP Thu May 21 12:53:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux more info : https://answers.launchpad.net/ubuntu/+question/691070 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-signed/+bug/1881757/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1931715] Re: [Lenovo Ideapad S145 82DJ0001BR] touchpad not working - does not appear on "cat /proc/bus/input/devices"
** Changed in: linux (Ubuntu) Status: Fix Released => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1931715 Title: [Lenovo Ideapad S145 82DJ0001BR] touchpad not working - does not appear on "cat /proc/bus/input/devices" Status in linux package in Ubuntu: Fix Committed Bug description: Laptop model: Lenovo Ideapad S145 82DJ0001BR Manufacturer of the Touchpad: Elan, Synaptics When the symptom first appeared: At the time I installed Ubuntu on my notebook (dual-boot) - it works fine on Windows. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.8.0-55-generic 5.8.0-55.62~20.04.1 ProcVersionSignature: Ubuntu 5.8.0-55.62~20.04.1-generic 5.8.18 Uname: Linux 5.8.0-55-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.18 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Fri Jun 11 11:58:39 2021 InstallationDate: Installed on 2021-06-09 (1 days ago) InstallationMedia: Ubuntu 20.04.2.0 LTS "Focal Fossa" - Release amd64 (20210209.1) SourcePackage: linux-signed-hwe-5.8 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931715/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1931715] Re: [Lenovo Ideapad S145 82DJ0001BR] touchpad not working - does not appear on "cat /proc/bus/input/devices"
Hey, I've tested the kernel as suggested by Hui Wang (5.8.0-60-generic) and now my touchpad is working normally. Thanks! I couldn't install the latest kernel as suggested by Po-Hsu Lin because I was getting errors with unmet dependecies in one of the .deb files, even after installing the other two. As requested, I'm uploading the dmesg. ** Attachment added: "dmesg.txt" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931715/+attachment/5506525/+files/dmesg.txt ** Changed in: linux (Ubuntu) Status: Incomplete => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1931715 Title: [Lenovo Ideapad S145 82DJ0001BR] touchpad not working - does not appear on "cat /proc/bus/input/devices" Status in linux package in Ubuntu: Fix Released Bug description: Laptop model: Lenovo Ideapad S145 82DJ0001BR Manufacturer of the Touchpad: Elan, Synaptics When the symptom first appeared: At the time I installed Ubuntu on my notebook (dual-boot) - it works fine on Windows. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.8.0-55-generic 5.8.0-55.62~20.04.1 ProcVersionSignature: Ubuntu 5.8.0-55.62~20.04.1-generic 5.8.18 Uname: Linux 5.8.0-55-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.18 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Fri Jun 11 11:58:39 2021 InstallationDate: Installed on 2021-06-09 (1 days ago) InstallationMedia: Ubuntu 20.04.2.0 LTS "Focal Fossa" - Release amd64 (20210209.1) SourcePackage: linux-signed-hwe-5.8 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931715/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1897727] [NEW] package linux-image-5.4.0-45-generic (not installed) failed to install/upgrade: o subprocesso instalado, do pacote linux-image-5.4.0-45-generic, o script post-ins
Public bug reported: repeat, always where restart ProblemType: Package DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-45-generic (not installed) ProcVersionSignature: Ubuntu 5.4.0-48.52-generic 5.4.60 Uname: Linux 5.4.0-48-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.8 AptOrdering: linux-libc-dev:amd64: Install NULL: ConfigurePending Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: marcio_fx 1216 F pulseaudio /dev/snd/controlC0: marcio_fx 1216 F pulseaudio CasperMD5CheckResult: skip Date: Tue Sep 22 06:26:21 2020 ErrorMessage: o subprocesso instalado, do pacote linux-image-5.4.0-45-generic, o script post-installation retornou erro do status de saída 135 InstallationDate: Installed on 2020-08-05 (55 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) IwConfig: lono wireless extensions. enp2s0no wireless extensions. MachineType: Dell Inc. OptiPlex 380 ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-48-generic root=UUID=9ff02dc6-c5e8-4c64-8801-31cf21d29d0e ro quiet splash PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Python3Details: /usr/bin/python3.8, Python 3.8.2, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: N/A RelatedPackageVersions: grub-pc 2.04-1ubuntu26.4 RfKill: SourcePackage: linux Title: package linux-image-5.4.0-45-generic (not installed) failed to install/upgrade: o subprocesso instalado, do pacote linux-image-5.4.0-45-generic, o script post-installation retornou erro do status de saída 135 UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/23/2009 dmi.bios.vendor: Dell Inc. dmi.bios.version: A00 dmi.board.name: 0HN7XN dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA00:bd10/23/2009:svnDellInc.:pnOptiPlex380:pvr:rvnDellInc.:rn0HN7XN:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: OptiPlex 380 dmi.sys.vendor: Dell Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package focal -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1897727 Title: package linux-image-5.4.0-45-generic (not installed) failed to install/upgrade: o subprocesso instalado, do pacote linux- image-5.4.0-45-generic, o script post-installation retornou erro do status de saída 135 Status in linux package in Ubuntu: New Bug description: repeat, always where restart ProblemType: Package DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-45-generic (not installed) ProcVersionSignature: Ubuntu 5.4.0-48.52-generic 5.4.60 Uname: Linux 5.4.0-48-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.8 AptOrdering: linux-libc-dev:amd64: Install NULL: ConfigurePending Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: marcio_fx 1216 F pulseaudio /dev/snd/controlC0: marcio_fx 1216 F pulseaudio CasperMD5CheckResult: skip Date: Tue Sep 22 06:26:21 2020 ErrorMessage: o subprocesso instalado, do pacote linux-image-5.4.0-45-generic, o script post-installation retornou erro do status de saída 135 InstallationDate: Installed on 2020-08-05 (55 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) IwConfig: lono wireless extensions. enp2s0no wireless extensions. MachineType: Dell Inc. OptiPlex 380 ProcFB: 0 nouveaudrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-48-generic root=UUID=9ff02dc6-c5e8-4c64-8801-31cf21d29d0e ro quiet splash PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Python3Details: /usr/bin/python3.8, Python 3.8.2, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: N/A RelatedPackageVersions: grub-pc 2.04-1ubuntu26.4 RfKill: SourcePackage: linux Title: package linux-image-5.4.0-45-generic (not installed) failed to install/upgrade: o subprocesso instalado, do pacote linux-image-5.4.0-45-generic, o script post-installation retornou erro do status de saída 135 UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/23/2009 dmi.bios.vendor: Dell Inc. dmi.bios.version: A00 dmi.board.name: 0HN7XN dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA00:bd10/23/2009:svnDellInc.:pnOptiPlex380:pvr:rvnDellInc.:rn0HN7XN:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: OptiPlex 380 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1897727/+subscriptions
[Kernel-packages] [Bug 1857385] Re: xHCI host controller not responding, assume dead via USB-C docking station
Logs I see in dmesg when undocking: [ 233.116257] xhci_hcd :05:00.3: Abort failed to stop command ring: -110 [ 233.128054] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 233.128087] xhci_hcd :05:00.3: HC died; cleaning up [ 233.128286] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 233.128382] usb 2-4.2.4: Not enough bandwidth for altsetting 1 [ 233.128389] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ... last 2 lines are repeated a lot. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: Confirmed Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64
[Kernel-packages] [Bug 1857385] Re: xHCI host controller not responding, assume dead via USB-C docking station
Same here on x395 (amd chipset) with Ubuntu 18.04 and 20.04 (kernel 5.4.0-14-generic). Also same on Fedora 31. Attached a script that restore USB after undocking as workaround. ** Attachment added: "Script to reset xHCI after undocking" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1857385/+attachment/5329344/+files/xhci-reset.sh -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: Confirmed Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro
[Kernel-packages] [Bug 1801404] [NEW] Macbook air, 18.10, fn keys to set keyboard backlight do not work
Public bug reported: The F5/F6 keys used to work to set the keyboard backillumination level with 18.04 but they do not work anymore with 18.10 4.18.0-10-generic The back illumination can be turned on with : echo 255 > /sys/class/leds/smc\:\:kbd_backlight/brightness but not anymore with the Fn keys. I'm not sure if it is a kernel issue or a keyboard mapping / X issue. Which test should I run to try to figure out where the problem is? ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: linux-image-4.18.0-10-generic 4.18.0-10.11 ProcVersionSignature: Ubuntu 4.18.0-10.11-generic 4.18.12 Uname: Linux 4.18.0-10-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.10-0ubuntu13 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xavier 1452 F pulseaudio /dev/snd/controlC1: xavier 1452 F pulseaudio CurrentDesktop: KDE Date: Fri Nov 2 19:45:26 2018 InstallationDate: Installed on 2018-10-27 (6 days ago) InstallationMedia: Kubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.2) MachineType: Apple Inc. MacBookAir7,2 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.18.0-10-generic root=/dev/mapper/lvm--vg-ubuntu--root ro cryptopts=target=CryptDisk,source=/dev/disk/by-uuid/0e4ab982-9511-479c-8a7a-4d933fcd3df1,lvm=lvm-vg quiet splash vt.handoff=1 RelatedPackageVersions: linux-restricted-modules-4.18.0-10-generic N/A linux-backports-modules-4.18.0-10-generic N/A linux-firmware 1.175 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/05/2018 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA71.88Z.0178.B00.1806051659 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-937CB26E2E02BB01 dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir7,2 dmi.chassis.asset.tag: Chassis Board Asset Tag# dmi.chassis.type: 9 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-937CB26E2E02BB01 dmi.modalias: dmi:bvnAppleInc.:bvrMBA71.88Z.0178.B00.1806051659:bd06/05/2018:svnAppleInc.:pnMacBookAir7,2:pvr1.0:rvnAppleInc.:rnMac-937CB26E2E02BB01:rvrMacBookAir7,2:cvnAppleInc.:ct9:cvrMac-937CB26E2E02BB01: dmi.product.family: Mac dmi.product.name: MacBookAir7,2 dmi.product.sku: System SKU# dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-bug cosmic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1801404 Title: Macbook air, 18.10, fn keys to set keyboard backlight do not work Status in linux package in Ubuntu: Confirmed Bug description: The F5/F6 keys used to work to set the keyboard backillumination level with 18.04 but they do not work anymore with 18.10 4.18.0-10-generic The back illumination can be turned on with : echo 255 > /sys/class/leds/smc\:\:kbd_backlight/brightness but not anymore with the Fn keys. I'm not sure if it is a kernel issue or a keyboard mapping / X issue. Which test should I run to try to figure out where the problem is? ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: linux-image-4.18.0-10-generic 4.18.0-10.11 ProcVersionSignature: Ubuntu 4.18.0-10.11-generic 4.18.12 Uname: Linux 4.18.0-10-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.10-0ubuntu13 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xavier 1452 F pulseaudio /dev/snd/controlC1: xavier 1452 F pulseaudio CurrentDesktop: KDE Date: Fri Nov 2 19:45:26 2018 InstallationDate: Installed on 2018-10-27 (6 days ago) InstallationMedia: Kubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.2) MachineType: Apple Inc. MacBookAir7,2 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.18.0-10-generic root=/dev/mapper/lvm--vg-ubuntu--root ro cryptopts=target=CryptDisk,source=/dev/disk/by-uuid/0e4ab982-9511-479c-8a7a-4d933fcd3df1,lvm=lvm-vg quiet splash vt.handoff=1 RelatedPackageVersions: linux-restricted-modules-4.18.0-10-generic N/A linux-backports-modules-4.18.0-10-generic N/A linux-firmware 1.175 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/05/2018 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA71.88Z.0178.B00.1806051659 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-937CB26E2E02BB01 dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir7,2 dmi.chassis.asset.tag: Chassis Board Asset Tag# dmi.chassis.type: 9 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-937CB26E2E02BB01 dmi.modalias: dmi:bvnAppleInc.:bvrMBA71.88Z.0178.B00.1806051659:bd06/05/2018:svnAppleInc.:pnMacBookAir7,2:pvr1.0:rvnAppleInc.:rnMac-937CB26E2E02BB01:rvrMacB
[Kernel-packages] [Bug 1794280] Re: gdm doesn't start on a fresh installation of Cosmic Desktop
Hi, I have the same problem since 3 weeks on a fresh install of Ubuntu Cosmic, with Wayland session enabled by default : 2/3 of the time, login screen doesn't appear and screen remains black, pushing power button makes Ubuntu background visible again and computer stops. I join some Auth.log since 17th September, here is an extract - will do some further tests : Session c1 logged out. Waiting for processes to exit. Unregistered Authentication Agent for unix-session:c1 (system bus name :1.35, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale fr_FR.UTF-8) (disconnected from bus) Removed session c1. session closed for user gdm session opened for user root by (uid=1000) Executing command [USER=root] [TTY=unknown] [CWD=/home/valeryan24] [COMMAND=/usr/lib/update-notifier/package-system-locked] Operator of unix-session:2 successfully authenticated as unix-user:valeryan24 to gain TEMPORARY authorization for action org.debian.apt.install-or-remove-packages for system-bus-name::1.336 [/usr/bin/python3 /usr/bin/update-manager --no-update --no-focus-on-map] (owned by unix-user:valeryan24) asked to register item /org/freedesktop/secrets/collection/login/1, but it's already registered [system] Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) Registered Authentication Agent for unix-session:2 (system bus name :1.190 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale fr_FR.UTF-8) New seat seat0. pam_unix(gdm-launch-environment:session): session opened for user gdm by (uid=0) New session c1 of user gdm. session opened for user gdm by (uid=0) gdm-launch-environment]: pam_unix(gdm-launch-environment:session): session closed for user gdm Session c1 logged out. Waiting for processes to exit. Removed session c1. pam_unix(gdm-launch-environment:session): session opened for user gdm by (uid=0) New session c2 of user gdm. pam_systemd(gdm-launch-environment:session): Failed to create session: Start job for unit user-121.slice failed with 'canceled' session closed for user gdm session opened for user gdm by (uid=0) pam_unix(gdm-launch-environment:session): session closed for user gdm Session c2 logged out. Waiting for processes to exit. Removed session c2. systemd: pam_unix(systemd-user:session): session closed for user gdm systemd-logind[815]: Power key pressed. systemd-logind[815]: Powering Off... systemd-logind[815]: System is powering down. ** Attachment added: "Auth.log" https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1794280/+attachment/5199069/+files/Auth.log -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1794280 Title: gdm doesn't start on a fresh installation of Cosmic Desktop Status in gdm3 package in Ubuntu: Won't Fix Status in kmod package in Ubuntu: Invalid Status in linux package in Ubuntu: Invalid Status in xorg-server package in Ubuntu: Confirmed Status in xserver-xorg-video-fbdev package in Ubuntu: Fix Released Status in gdm3 source package in Cosmic: Won't Fix Status in kmod source package in Cosmic: Invalid Status in linux source package in Cosmic: Invalid Status in xorg-server source package in Cosmic: Confirmed Status in xserver-xorg-video-fbdev source package in Cosmic: Fix Released Bug description: ubuntu cosmic desktop 20180925 After installation gdm fails to start and there is only a black screen with a blinking cursor on the top left of the screen. gdm3 can be started manually from a tty When this issue happens there is a plymouth crash reported in bug 1794292 ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: gdm3 3.30.0-0ubuntu2 ProcVersionSignature: Ubuntu 4.18.0-7.8-generic 4.18.5 Uname: Linux 4.18.0-7-generic x86_64 ApportVersion: 2.20.10-0ubuntu11 Architecture: amd64 Date: Tue Sep 25 13:54:45 2018 InstallationDate: Installed on 2018-09-25 (0 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Alpha amd64 (20180925) ProcEnviron: TERM=linux PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: gdm3 UpgradeStatus: No upgrade log present (probably fresh install) mtime.conffile..etc.gdm3.custom.conf: 2018-09-25T13:49:41.053012 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1794280/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1779802] Re: Touchpad of ThinkPad P52 failed to work with message "lost sync at byte"
I can also confirm that this is fixed in linux 4.15.0-31 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1779802 Title: Touchpad of ThinkPad P52 failed to work with message "lost sync at byte" Status in HWE Next: New Status in HWE Next artful series: New Status in HWE Next bionic series: New Status in linux package in Ubuntu: Incomplete Status in linux-oem package in Ubuntu: Fix Released Status in linux source package in Artful: Invalid Status in linux-oem source package in Artful: Invalid Status in linux source package in Bionic: Fix Committed Status in linux-oem source package in Bionic: Invalid Bug description: On ThinkPad P52: touchpad failed to work and reports: [ 2.713396] input: ETPS/2 Elantech TrackPoint as /devices/platform/i8042/serio1/input/input8 [ 2.725328] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 And lots of errors printed out: [ 19.468387] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.474455] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.480657] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.487665] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.494682] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.494685] psmouse serio1: issuing reconnect request [ 19.679895] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.686285] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.692642] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.699858] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.706873] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 And the middle button can not work too. [Impact] On ThinkPad P52, Elantech touchpad had sync issue then failed to work. Middle button was not enabled too. [Fix] With two upstream patches, elantech touchpad works fine with middle button. [Test Case] Touchpad moves fine, left/right/middle buttons works fine. scroll mode works fine. [Regression Potential] Very low, Just enable specific hardware support. ??? (1): Input: elantech - fix V4 report decoding for module with middle key Aaron Ma (1): Input: elantech - enable middle button of touchpads on ThinkPad P52 drivers/input/mouse/elantech.c | 11 +-- 1 file changed, 9 insertions(+), 2 deletions(-) To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1779802/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1779802] Re: Touchpad of ThinkPad P52 failed to work with message "lost sync at byte"
I don't know about Xenial, but with the latest Kernel from bionic- proposed (4.15.0-26-generic #28-Ubuntu x86_64), the problem still exists. I am a little confused about the tag name, would it apply to Bionic too? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1779802 Title: Touchpad of ThinkPad P52 failed to work with message "lost sync at byte" Status in HWE Next: New Status in HWE Next artful series: New Status in HWE Next bionic series: New Status in linux package in Ubuntu: Incomplete Status in linux-oem package in Ubuntu: Confirmed Status in linux source package in Artful: New Status in linux-oem source package in Artful: New Status in linux source package in Bionic: New Status in linux-oem source package in Bionic: Invalid Bug description: On ThinkPad P52: touchpad failed to work and reports: [ 2.713396] input: ETPS/2 Elantech TrackPoint as /devices/platform/i8042/serio1/input/input8 [ 2.725328] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 And lots of errors printed out: [ 19.468387] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.474455] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.480657] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.487665] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.494682] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.494685] psmouse serio1: issuing reconnect request [ 19.679895] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.686285] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.692642] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.699858] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 19.706873] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 And the middle button can not work too. [Impact] On ThinkPad P52, Elantech touchpad had sync issue then failed to work. Middle button was not enabled too. [Fix] With two upstream patches, elantech touchpad works fine with middle button. [Test Case] Touchpad moves fine, left/right/middle buttons works fine. scroll mode works fine. [Regression Potential] Very low, Just enable specific hardware support. ??? (1): Input: elantech - fix V4 report decoding for module with middle key Aaron Ma (1): Input: elantech - enable middle button of touchpads on ThinkPad P52 drivers/input/mouse/elantech.c | 11 +-- 1 file changed, 9 insertions(+), 2 deletions(-) To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1779802/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1685794] Re: Boot delayed for about 90 seconds until 'random: crng init done'
First of all, I do not use Ubuntu, I use Debian, but I thought it would be a nice input anyway, feel free to delete this if this don't help. I had the same problem the first reboot I did after a system update to: Linux version 4.9.0-6-amd64 (debian-ker...@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.88-1 (2018-04-29) Boot got stuck everytime at random: crng init, varying from 1min to 20min. A friend told me it was because the random pool was being populated everytime I booted and for some reason it was taking too long. I installed the havenge package (deb free repo) that contains an alternative algorithm to populate de RNG seeds. Apparently the problem is now solved, as my system is now booting in 13s. Hopefully this will be of some help. Anyway, if installing havenge does not work, you could purge it afterwards and no harm done... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1685794 Title: Boot delayed for about 90 seconds until 'random: crng init done' Status in linux package in Ubuntu: Confirmed Bug description: Shortened dmesg output, notice the unnaturally long delay before crng init finishes: [8.533630] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [8.542239] input: HDA Intel PCH Mic as /devices/pci:00/:00:1b.0/sound/card1/input18 [8.542313] input: HDA Intel PCH Line as /devices/pci:00/:00:1b.0/sound/card1/input19 [8.542382] input: HDA Intel PCH Dock Line Out as /devices/pci:00/:00:1b.0/sound/card1/input20 [8.542449] input: HDA Intel PCH Headphone as /devices/pci:00/:00:1b.0/sound/card1/input21 [8.544240] cdc_ether 2-6:2.0 usb0: register 'cdc_ether' at usb-:00:14.0-6, CDC Ethernet Device, 02:1e:10:1f:00:00 [8.544271] usbcore: registered new interface driver cdc_ether [8.637660] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [8.654022] input: HP WMI hotkeys as /devices/virtual/input/input22 [8.688226] cdc_ether 2-6:2.0 enp0s20u6c2: renamed from usb0 [8.713288] iwlwifi :02:00.0 wlo1: renamed from wlan0 [9.804308] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input23 [ 98.327857] random: crng init done [ 98.330072] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 98.330073] Bluetooth: BNEP filters: protocol multicast [ 98.330077] Bluetooth: BNEP socket layer initialized [ 98.443281] kauditd_printk_skb: 90 callbacks suppressed [ 98.492927] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 98.681030] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 98.685672] IPv6: ADDRCONF(NETDEV_UP): enp0s20u6c2: link is not ready [ 98.685789] cdc_ether 2-6:2.0 enp0s20u6c2: kevent 12 may have been dropped [ 98.688384] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 98.690915] iwlwifi :02:00.0: L1 Enabled - LTR Enabled ProblemType: Bug DistroRelease: Ubuntu 17.04 Package: linux-image-4.10.0-19-generic 4.10.0-19.21 [modified: boot/vmlinuz-4.10.0-19-generic] ProcVersionSignature: Ubuntu 4.10.0-19.21-generic 4.10.8 Uname: Linux 4.10.0-19-generic x86_64 ApportVersion: 2.20.4-0ubuntu4 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/hwC1D0', '/dev/snd/pcmC1D0c', '/dev/snd/pcmC1D0p', '/dev/snd/controlC1', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D8p', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/controlC0', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CurrentDesktop: Unity:Unity7 Date: Mon Apr 24 14:58:33 2017 EcryptfsInUse: Yes InstallationDate: Installed on 2017-04-18 (5 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) MachineType: Hewlett-Packard HP EliteBook 840 G1 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-19-generic.efi.signed root=UUID=9fb9fc1d-15a4-4e98-a2ae-bf572e0900d5 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.10.0-19-generic N/A linux-backports-modules-4.10.0-19-generic N/A linux-firmware 1.164 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/23/2016 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: L71 Ver. 01.37 dmi.board.name: 198F dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 15.59 dmi.chassis.asset.tag: USH452L0B1 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias:
[Kernel-packages] [Bug 1678590] Re: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event
It works with the kernel currently in -proposed. Thank you! ** Tags removed: verification-needed-zesty ** Tags added: verification-done-zesty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Fix Committed Status in linux source package in Zesty: Fix Committed Bug description: [Impact] Battery events does not work on Dell Inspiron 7537. [Test Case] Boot the machine, no battery detected. Add a quirk for Inspiron 7537 can make battery detection work. [Regression Potential] None. It only applies to one specific laptop, Dell Inspiron 7537. Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] Re: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event
Perfect example of excellent support! Thanks. I hope the patch will find its way to the next zesty kernel update. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Fix Committed Status in linux source package in Zesty: Fix Committed Bug description: [Impact] Battery events does not work on Dell Inspiron 7537. [Test Case] Boot the machine, no battery detected. Add a quirk for Inspiron 7537 can make battery detection work. [Regression Potential] None. It only applies to one specific laptop, Dell Inspiron 7537. Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1691169] [NEW] package linux-image-4.10.0-21-generic (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 128
Public bug reported: Crash ProblemType: Package DistroRelease: Ubuntu 17.04 Package: linux-image-4.10.0-21-generic (not installed) ProcVersionSignature: Ubuntu 4.10.0-20.22-generic 4.10.8 Uname: Linux 4.10.0-20-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.4-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ivo1631 F pulseaudio /dev/snd/controlC1: ivo1631 F pulseaudio Date: Tue May 16 15:27:54 2017 ErrorMessage: subprocess new pre-installation script returned error exit status 128 InstallationDate: Installed on 2017-05-11 (4 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) MachineType: Apple Inc. MacBookPro11,1 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-20-generic.efi.signed root=UUID=76c85118-4df4-4a25-a5ab-3d4849422ac8 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: grub-pc N/A SourcePackage: linux Title: package linux-image-4.10.0-21-generic (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 128 UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/17/2017 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBP111.88Z.0138.B25.1702171721 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-189A3D4F975D5FFC dmi.board.vendor: Apple Inc. dmi.board.version: MacBookPro11,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-189A3D4F975D5FFC dmi.modalias: dmi:bvnAppleInc.:bvrMBP111.88Z.0138.B25.1702171721:bd02/17/2017:svnAppleInc.:pnMacBookPro11,1:pvr1.0:rvnAppleInc.:rnMac-189A3D4F975D5FFC:rvrMacBookPro11,1:cvnAppleInc.:ct10:cvrMac-189A3D4F975D5FFC: dmi.product.name: MacBookPro11,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-package zesty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1691169 Title: package linux-image-4.10.0-21-generic (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 128 Status in linux package in Ubuntu: Confirmed Bug description: Crash ProblemType: Package DistroRelease: Ubuntu 17.04 Package: linux-image-4.10.0-21-generic (not installed) ProcVersionSignature: Ubuntu 4.10.0-20.22-generic 4.10.8 Uname: Linux 4.10.0-20-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.4-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ivo1631 F pulseaudio /dev/snd/controlC1: ivo1631 F pulseaudio Date: Tue May 16 15:27:54 2017 ErrorMessage: subprocess new pre-installation script returned error exit status 128 InstallationDate: Installed on 2017-05-11 (4 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) MachineType: Apple Inc. MacBookPro11,1 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-20-generic.efi.signed root=UUID=76c85118-4df4-4a25-a5ab-3d4849422ac8 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: grub-pc N/A SourcePackage: linux Title: package linux-image-4.10.0-21-generic (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 128 UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/17/2017 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBP111.88Z.0138.B25.1702171721 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-189A3D4F975D5FFC dmi.board.vendor: Apple Inc. dmi.board.version: MacBookPro11,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-189A3D4F975D5FFC dmi.modalias: dmi:bvnAppleInc.:bvrMBP111.88Z.0138.B25.1702171721:bd02/17/2017:svnAppleInc.:pnMacBookPro11,1:pvr1.0:rvnAppleInc.:rnMac-189A3D4F975D5FFC:rvrMacBookPro11,1:cvnAppleInc.:ct10:cvrMac-189A3D4F975D5FFC: dmi.product.name: MacBookPro11,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1691169/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] Re: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event
Here we go (except if it would be reverted before 4.12 but why would it?) https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/acpi/blacklist.c -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: In Progress Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] Re: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event
The patch is not getting much attention on the linux-acpi list :( -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: In Progress Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] Re: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event
Mix of "fun" and "to be right sure it works" :) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: In Progress Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] Re: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event
I think you mean this patch? It will probably take quite some time to
find its way to the package. I'm going to try to compile a patched
ubuntu kernel in the meantime. thanks.
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 4421f7c9981c..bb542acc0574 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -188,6 +188,14 @@ static struct dmi_system_id acpi_rev_dmi_table[]
__initdata = {
DMI_MATCH(DMI_PRODUCT_NAME, "Latitude 3350"),
},
},
+ {
+.callback = dmi_enable_rev_override,
+.ident = "DELL Inspiron 7537",
+.matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7537"),
+ },
+ },
#endif
{}
};
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1678590
Title:
Dell Inspiron on kernel 4.10 : battery detected only after AC power
adapter event
Status in linux package in Ubuntu:
In Progress
Bug description:
Hi,
I already reported the bug here:
http://www.spinics.net/lists/linux-acpi/msg73101.html
When I boot a Dell 15" serie 7000 with or without it AC power adapter
no battery is detected:
acpi -i -b -a
Adapter 0: off-line
As soon as I plug or unplug the AC adapter, the battery is detected:
acpi -i -b -a
Battery 0: Charging, 62%, 01:13:00 until charged
Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97%
Adapter 0: on-line
cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-
4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7
I've tried with and without acpi_osi=Linux but it makes no difference.
Attached : dmesg and dsdt in
http://www.spinics.net/lists/linux-acpi/msg73101.html
I think that acpi_osi=Linux used to do the trick but it does not work on
vmlinuz-4.10.0-13-generic
Xavier
---
ApportVersion: 2.20.4-0ubuntu2
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio
/dev/snd/controlC1: xavier 1473 F.... pulseaudio
/dev/snd/controlC0: xavier 1473 F pulseaudio
DistroRelease: Ubuntu 17.04
EcryptfsInUse: Yes
HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604
InstallationDate: Installed on 2017-03-28 (5 days ago)
InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321)
MachineType: Dell Inc. Inspiron 7537
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic
root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash
ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1
RelatedPackageVersions:
linux-restricted-modules-4.10.0-13-generic N/A
linux-backports-modules-4.10.0-13-generic N/A
linux-firmware 1.164
Tags: zesty
Uname: Linux 4.10.0-13-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers
_MarkForUpload: True
dmi.bios.date: 10/04/2016
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A14
dmi.board.name: 03HR9V
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: 0.1
dmi.modalias:
dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1:
dmi.product.name: Inspiron 7537
dmi.sys.vendor: Dell Inc.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] Re: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event
No such bug (The battery is correctly detected) with linux-image-4.4.0-72-generic_4.4.0-72.93_amd64.deb and ro acpi_osi=Linux quiet splash vt.handoff=7 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: In Progress Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] Re: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event
OK do you have a patch? On which basis do you want to set _REV to 2 instead of 5? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: In Progress Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] Re: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event
Thanks! Adding acpi_rev_override does the trick! I set it to "fix released" even if "workaround documented" would be more appropriate. ** Changed in: linux (Ubuntu) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Fix Released Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] Re: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event
Exact same bug with kernel 4.11.0-041100rc5-generic (still with acpi_osi=Linux in the kernel options) ** Tags added: kernel-bug-exists-upstream ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1678590/+attachment/4852654/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1678590/+attachment/4852653/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1678590/+attachment/4852656/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1678590/+attachment/4852657/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] JournalErrors.txt
apport information ** Attachment added: "JournalErrors.txt" https://bugs.launchpad.net/bugs/1678590/+attachment/4852650/+files/JournalErrors.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1678590/+attachment/4852659/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1678590/+attachment/4852652/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1678590/+attachment/4852655/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1678590/+attachment/4852651/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1678590/+attachment/4852648/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1678590/+attachment/4852649/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1678590/+attachment/4852658/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1678590/+attachment/4852647/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1678590/+attachment/4852660/+files/WifiSyslog.txt ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports-modules-4.10.0-13-generic N/A linux-firmware 1.164 Tags: zesty Uname: Linux 4.10.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 10/04/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 03HR9V dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Inspiron 7537 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1678590] Re: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event
apport information ** Tags added: apport-collected zesty ** Description changed: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier + --- + ApportVersion: 2.20.4-0ubuntu2 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio + /dev/snd/controlC1: xavier 1473 F pulseaudio + /dev/snd/controlC0: xavier 1473 F pulseaudio + DistroRelease: Ubuntu 17.04 + EcryptfsInUse: Yes + HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 + InstallationDate: Installed on 2017-03-28 (5 days ago) + InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) + MachineType: Dell Inc. Inspiron 7537 + Package: linux (not installed) + ProcFB: 0 inteldrmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash + ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 + RelatedPackageVersions: + linux-restricted-modules-4.10.0-13-generic N/A + linux-backports-modules-4.10.0-13-generic N/A + linux-firmware 1.164 + Tags: zesty + Uname: Linux 4.10.0-13-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers + _MarkForUpload: True + dmi.bios.date: 10/04/2016 + dmi.bios.vendor: Dell Inc. + dmi.bios.version: A14 + dmi.board.name: 03HR9V + dmi.board.vendor: Dell Inc. + dmi.board.version: A00 + dmi.chassis.type: 8 + dmi.chassis.vendor: Dell Inc. + dmi.chassis.version: 0.1 + dmi.modalias: dmi:bvnDellInc.:bvrA14:bd10/04/2016:svnDellInc.:pnInspiron7537:pvr:rvnDellInc.:rn03HR9V:rvrA00:cvnDellInc.:ct8:cvr0.1: + dmi.product.name: Inspiron 7537 + dmi.sys.vendor: Dell Inc. ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1678590/+attachment/4852646/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: Confirmed Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier --- ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: xavier 1473 F...m pulseaudio /dev/snd/controlC1: xavier 1473 F pulseaudio /dev/snd/controlC0: xavier 1473 F pulseaudio DistroRelease: Ubuntu 17.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=31a2d0a3-34b9-467d-8c4d-f226cc825604 InstallationDate: Installed on 2017-03-28 (5 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Beta amd64 (20170321) MachineType: Dell Inc. Inspiron 7537 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc-4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash ProcVersionSignature: Ubuntu 4.10.0-13.15-generic 4.10.1 RelatedPackageVersions: linux-restricted-modules-4.10.0-13-generic N/A linux-backports
[Kernel-packages] [Bug 1678590] [NEW] Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event
Public bug reported: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1678590 Title: Dell Inspiron on kernel 4.10 : battery detected only after AC power adapter event Status in linux package in Ubuntu: New Bug description: Hi, I already reported the bug here: http://www.spinics.net/lists/linux-acpi/msg73101.html When I boot a Dell 15" serie 7000 with or without it AC power adapter no battery is detected: acpi -i -b -a Adapter 0: off-line As soon as I plug or unplug the AC adapter, the battery is detected: acpi -i -b -a Battery 0: Charging, 62%, 01:13:00 until charged Battery 0: design capacity 3950 mAh, last full capacity 3850 mAh = 97% Adapter 0: on-line cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.10.0-13-generic root=UUID=42930a1e-fbdc- 4cd8-a1d2-caf2bd33de1b ro acpi_osi=Linux quiet splash vt.handoff=7 I've tried with and without acpi_osi=Linux but it makes no difference. Attached : dmesg and dsdt in http://www.spinics.net/lists/linux-acpi/msg73101.html I think that acpi_osi=Linux used to do the trick but it does not work on vmlinuz-4.10.0-13-generic Xavier To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678590/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1557776] Re: CONFIG_AUFS_XATTR is not set
In Ubuntu 16.10 the kernel configuration seems to have again # CONFIG_AUFS_XATTR is not set I'm wondering if this is intentional or by mistake. Observed from linux- image-4.8.0-21-generic_4.8.0-21.23_amd64.deb. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1557776 Title: CONFIG_AUFS_XATTR is not set Status in linux package in Ubuntu: Fix Released Status in linux source package in Wily: Fix Released Status in linux source package in Xenial: Fix Released Bug description: I am using ubuntu 15.10 with kernel linux-image-4.2.0-27-generic. The setting CONFIG_AUFS_XATTR is not set. With the previous ubuntu version 15.04 and linux- image-3.19.0-42-generic this setting was compiled as CONFIG_AUFS_XATTR=y Without CONFIG_AUFS_XATTR docker users using the AUFS driver can not work with capabilities. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1557776/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1384342] Re: kernel messages intel_crtc_wait_for_pending_flips correlate to compiz hang
Linux xavier 4.4.0-31-generic #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux Ubuntu 16.04.1 LTS (Xenial Xerus). Using external monitor and laptop lip closed. [52362.767655] WARNING: CPU: 0 PID: 2811 at /build/linux-dcxD3m/linux-4.4.0/drivers/gpu/drm/i915/intel_display.c:3968 intel_crtc_wait_for_pending_flips+0x233/0x240 [i915]() [52362.767656] Removing stuck page flip [52362.767657] Modules linked in: btrfs xor raid6_pq ufs qnx4 hfsplus hfs minix ntfs msdos jfs xfs libcrc32c cpuid hidp nvram rfcomm msr bnep btusb btrtl btbcm btintel bluetooth joydev input_leds bcm5974 binfmt_misc applesmc input_polldev nls_iso8859_1 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul snd_hda_codec_hdmi aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd thunderbolt brcmfmac brcmutil cfg80211 lpc_ich intel_pch_thermal bdc_pci mei_me snd_hda_codec_cirrus snd_hda_codec_generic mei shpchp snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq sbs snd_seq_device sbshc snd_timer acpi_als kfifo_buf snd industrialio apple_bl soundcore spi_pxa2xx_platform mac_hid parport_pc ppdev lp parport autofs4 uas usb_storage hid_apple hid_generic i915 i2c_algo_bit ahci drm_kms_helper libahci usbhid syscopyarea sysfillrect hid sysimgblt fb_sys_fops drm fje s video [52362.767706] CPU: 0 PID: 2811 Comm: Xorg Tainted: GW 4.4.0-31-generic #50-Ubuntu [52362.767707] Hardware name: Apple Inc. MacBookPro12,1/Mac-E43C1C25D4880AD6, BIOS MBP121.88Z.0167.B15.1510261437 10/26/2015 [52362.767708] 00200086 5bb1e7d4 88026295faa0 813f1143 [52362.767711] 88026295fae8 c0213a70 88026295fad8 81081102 [52362.767714] 8800358341a8 88025ee19008 880264827000 880035834000 [52362.767717] Call Trace: [52362.767720] [] dump_stack+0x63/0x90 [52362.767724] [] warn_slowpath_common+0x82/0xc0 [52362.767727] [] warn_slowpath_fmt+0x5c/0x80 [52362.767730] [] ? finish_wait+0x55/0x70 [52362.767756] [] intel_crtc_wait_for_pending_flips+0x233/0x240 [i915] [52362.767759] [] ? wake_atomic_t_function+0x60/0x60 [52362.767786] [] intel_pre_plane_update+0x111/0x140 [i915] [52362.767811] [] intel_atomic_commit+0x352/0x6f0 [i915] [52362.767829] [] ? drm_atomic_check_only+0x18e/0x590 [drm] [52362.767846] [] drm_atomic_commit+0x37/0x60 [drm] [52362.767854] [] drm_atomic_helper_disable_plane+0xa9/0xf0 [drm_kms_helper] [52362.767868] [] __setplane_internal+0x169/0x250 [drm] [52362.767885] [] ? drm_modeset_lock_all_ctx+0x9a/0xb0 [drm] [52362.767900] [] drm_mode_setplane+0x136/0x1b0 [drm] [52362.767911] [] drm_ioctl+0x152/0x540 [drm] [52362.767925] [] ? drm_plane_check_pixel_format+0x50/0x50 [drm] [52362.767929] [] do_vfs_ioctl+0x29f/0x490 [52362.767932] [] ? __sb_end_write+0x21/0x30 [52362.767935] [] ? vfs_write+0x15d/0x1a0 [52362.767938] [] SyS_ioctl+0x79/0x90 [52362.767940] [] entry_SYSCALL_64_fastpath+0x16/0x71 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1384342 Title: kernel messages intel_crtc_wait_for_pending_flips correlate to compiz hang Status in Linux: Unknown Status in System76: New Status in xf86-video-intel: Fix Released Status in linux package in Ubuntu: Triaged Status in linux package in Debian: Confirmed Status in linux package in Fedora: Unknown Status in linux package in openSUSE: Unknown Bug description: I am fairly frequently (maybe once every 2 days) seeing screen lockups. The system is fine, and then screen locks up. mouse is still movable and even changes icon based on content under it (ie mouse over link changes to pointing hand). Programs are still running (often this occurs during a google hangout, and the hangout, audio and mic seem to work fine). Today when this happened I had more patience and hit ctrl-alt-f1, and then subsequently saw that dmesg had: [82218.556025] [ cut here ] [82218.556074] WARNING: CPU: 0 PID: 8799 at /build/buildd/linux-3.16.0/drivers/gpu/drm/i915/intel_display.c:3324 intel_crtc_wait_for_pending_flips+0x16c/0x180 [i915]() [82218.556095] Modules linked in: xt_conntrack ipt_REJECT overlayfs pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack xt_tcpudp bridge stp llc iptable_filter ip_tables x_tables rfcomm bnep binfmt_misc dm_crypt uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media dm_multipath scsi_dh coretemp kvm_intel kvm arc4 joydev iwldvm mac80211 serio_raw btusb bluetooth pcmcia 6lowpan_iphc thinkpad_acpi snd_seq_midi snd_seq_midi_event nvram snd_hda_codec_conexant snd_hda_codec_generic r852 sm_common
[Kernel-packages] [Bug 1359803] Re: External mic not being used in combo port
It doesn't work for me. Macbook Pro Early 2015 using iPhone earphones. alsa-info.sh output: http://www.alsa-project.org/db/?f=a501c61487346e167aeb034a9ff0b7b0e8a81555 I've also tried using hdajackretask as explained by Denilson, but it didn't work for me. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1359803 Title: External mic not being used in combo port Status in linux package in Ubuntu: In Progress Bug description: I'm using Ubuntu 14.04 on my Asus 1015E that only has a combo audio port which accepts smartphone type "headsets" (3.5mm TRRS headphones with mic on the same wire). Ubuntu does not deactivate the built-in mic when I connect my headset. It doesn't even use the headset mic and instead keeps picking up audio signal from the integrated microphone (that's on my laptop bezel). ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-32-generic 3.13.0-32.57 ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: power-inside 4651 F pulseaudio Date: Thu Aug 21 20:24:20 2014 HibernationDevice: RESUME=UUID=d0a4bd33-50b7-419e-80da-efc7ad5b1247 InstallationDate: Installed on 2013-11-08 (286 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) MachineType: ASUSTeK COMPUTER INC. 1015E ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=0323822b-7902-4f91-bf79-2a91c47d7df5 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-32-generic N/A linux-backports-modules-3.13.0-32-generic N/A linux-firmware 1.127.5 SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-18 (124 days ago) dmi.bios.date: 03/15/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1015E.303 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: 1015E dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1015E.303:bd03/15/2013:svnASUSTeKCOMPUTERINC.:pn1015E:pvr1.0:rvnASUSTeKCOMPUTERINC.:rn1015E:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: 1015E dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1359803/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1478754] Re: [Lenovo Thinkpad X1 Carbon 3rd Gen] Wireless disconnects using Intel 7265 [8086:095b] (rev 59)
x1 carbon gen3. same problem. its usually disconnect about 30 times a day and I am trying to work on this laptop. this is becoming insane. sometimes the connection wont stay up longer than a minute at a time. Linux 3.19.0-42-generic #48~14.04.1-Ubuntu SMP Fri Dec 18 10:24:49 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1478754 Title: [Lenovo Thinkpad X1 Carbon 3rd Gen] Wireless disconnects using Intel 7265 [8086:095b] (rev 59) Status in linux package in Ubuntu: Confirmed Bug description: Wireless disconnects from networks randomly - sometimes connections OK for days, other times for only a few minutes. Sometimes a wireless power off/on or system standby/resume re-establishes connection, but usually a reboot is required. Wireless hardware and symptoms similar to bug 1437913, but different laptop model. Log messages vary depending on the type of network being used. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-23-generic 3.19.0-23.24 ProcVersionSignature: Ubuntu 3.19.0-23.24-generic 3.19.8-ckt2 Uname: Linux 3.19.0-23-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: cimes 1898 F pulseaudio /dev/snd/controlC0: cimes 1898 F pulseaudio /dev/snd/controlC1: cimes 1898 F pulseaudio CurrentDesktop: Unity Date: Mon Jul 27 21:17:20 2015 HibernationDevice: RESUME=UUID=3b6a30b4-016d-4ebd-ae99-2e6b978faadd InstallationDate: Installed on 2015-06-15 (42 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1) MachineType: LENOVO 20BSCTO1WW ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-23-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.19.0-23-generic N/A linux-backports-modules-3.19.0-23-generic N/A linux-firmware 1.143.2 SourcePackage: linux UpgradeStatus: Upgraded to vivid on 2015-06-19 (38 days ago) dmi.bios.date: 03/12/2015 dmi.bios.vendor: LENOVO dmi.bios.version: N14ET28W (1.06 ) dmi.board.asset.tag: Not Available dmi.board.name: 20BSCTO1WW dmi.board.vendor: LENOVO dmi.board.version: SDK0E50510 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrN14ET28W(1.06):bd03/12/2015:svnLENOVO:pn20BSCTO1WW:pvrThinkPadX1Carbon3rd:rvnLENOVO:rn20BSCTO1WW:rvrSDK0E50510WIN:cvnLENOVO:ct10:cvrNone: dmi.product.name: 20BSCTO1WW dmi.product.version: ThinkPad X1 Carbon 3rd dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1478754/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1328260] Re: mighty mouse bluetooth not pairing
I was getting this same thing with a Microsoft Designer Mouse but after running `bluez-simple-agent` and using pin the mouse pairs and the 'New Device Setup' says "Succesfully set up device 'Designer Mouse'" but it doesn't work. In the Bluetooth devices it says 'Paired Yes' but the 'switch' on Connection is set to OFF and is disabled. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1328260 Title: mighty mouse bluetooth not pairing Status in bluez package in Ubuntu: Confirmed Bug description: Using the default GUI, I cannot pair my Apple Mighty Mouse. The mouse is detected, but when trying to pair, nothing happens and it is impossible to connect. It seems there should be an agent running to handle the pairing/pin stuff, I found that here: http://askubuntu.com/questions/453655/ubuntu-14-04-bluetooth-magic-mouse-doesnt-pair-no-agent-available It might be an issue with more devices, I did not test it. So the fix: In a terminal as a normal user do: bluez-simple-agent then use pin (worked in my case). Description: Ubuntu 14.04 LTS Release: 14.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1328260/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1448566] Re: Ubuntu 15.04 - Macbook Pro Early 2015 (12, 1) Bluetooth disabled
Please, any updates on how this should be available to Ubuntu users? Any instructions on how to setting it up for now? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1448566 Title: Ubuntu 15.04 - Macbook Pro Early 2015 (12,1) Bluetooth disabled Status in bluez package in Ubuntu: Invalid Status in linux package in Ubuntu: Incomplete Bug description: Fresh install of 15.04 on a Macbook Pro 12,1. I get no Bluetooth icon in the status bar, and in System Settings > Bluetooth, everything is greyed out (i.e., can't turn it on). $lsusb; dmesg | grep -i bluetooth; dmesg | grep -i firmware; rfkill list all; lsmod | grep bluetooth; hciconfig -a; uname -a Bus 002 Device 002: ID 05ac:8406 Apple, Inc. Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 05ac:0273 Apple, Inc. Bus 001 Device 004: ID 05ac:8290 Apple, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [ 32.369395] usb 1-3: Product: Bluetooth USB Host Controller [ 32.435743] input: Broadcom Corp. Bluetooth USB Host Controller as /devices/pci:00/:00:14.0/usb1/1-3/1-3:1.0/0003:05AC:8290.0006/input/input7 [ 32.490662] hid-generic 0003:05AC:8290.0006: input,hidraw5: USB HID v1.11 Keyboard [Broadcom Corp. Bluetooth USB Host Controller] on usb-:00:14.0-3/input0 [ 32.490750] input: Broadcom Corp. Bluetooth USB Host Controller as /devices/pci:00/:00:14.0/usb1/1-3/1-3:1.1/0003:05AC:8290.0007/input/input8 [ 32.490995] hid-generic 0003:05AC:8290.0007: input,hidraw6: USB HID v1.11 Mouse [Broadcom Corp. Bluetooth USB Host Controller] on usb-:00:14.0-3/input1 [ 34.866186] Bluetooth: Core ver 2.20 [ 34.866205] Bluetooth: HCI device and connection manager initialized [ 34.866751] Bluetooth: HCI socket layer initialized [ 34.866754] Bluetooth: L2CAP socket layer initialized [ 34.866759] Bluetooth: SCO socket layer initialized [ 0.158493] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.168342] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain [bus 00-9b] only partially covers this bridge [ 35.003383] brcmfmac :03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt failed with error -2 [ 35.290656] brcmf_c_preinit_dcmds: Firmware version = wl0: Mar 13 2015 08:11:08 version 7.35.177.36 (r540934) FWID 01-e4dc15b 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no bluetooth 491520 1 btusb Linux hxn-laptop-linux 3.19.0-15-generic #15-Ubuntu SMP Thu Apr 16 23:32:37 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1448566/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1307236] Re: NVidia Issues - blurry text after upgrading from 13.10 to 14.04
In my particular case, i installed the nvidia driver off the nvidia site, and everything was good for about a week. I then experienced the blurry text yesterday. I searched the sites and what i read ranged from reboot to remove and re-install unity. That seemed extreme, so logged out of unity and logged in as guest. The screens were as crisp as they once were. It is a profile issue. I attempted to find the culprit and what i found is the nvida-settings file. it is either corrupted or has some odd information in it causing the text to display as blurry. I found an article (can't remember where) that said it was a H sync scan rate issue within the file. I tried disabling the FXAA fix but it didn't work for me. you find it by doing a ls -al (it shows the hidden files/directories) All I did was find the nvida-settings file and deleted it. Log out and log back in, and all should be good. The file gets recreated. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-settings in Ubuntu. https://bugs.launchpad.net/bugs/1307236 Title: NVidia Issues - blurry text after upgrading from 13.10 to 14.04 Status in “nvidia-settings” package in Ubuntu: Incomplete Bug description: I have a System76 Bonoboo with a GeForce GTX 670MX I upgraded from 13.10 to 14.04 and after the upgrade finished I logged in and the text in the windows would get blurry until I refocused on the window and then get blurry again. I tried various nvidia installs (nvidia-common, nvidia-prime, etc.) and when I would reboot I would get the lightdm screen to authenticate but the dash panel would not appear after logging in. Looking at .xsessions I noticed: init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd respawning too fast, stopped My workaround has been: apt-get purge nvidia* and then to run NVIDIA-Linux-x86_64-331.49.run xrandr shows: Screen 0: minimum 8 x 8, current 3280 x 1080, maximum 16384 x 16384 LVDS-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 382mm x 215mm 1920x1080 60.0*+ 40.0 HDMI-0 connected 1360x768+1920+0 (normal left inverted right x axis y axis) 880mm x 506mm 1360x768 60.0*+ 1920x1080 59.9 60.1 60.0 1440x480 60.1 1280x768 59.9 1280x720 60.0 59.9 1024x768 60.0 800x60060.3 720x48059.9 60.1 640x48059.9 59.9 DP-0 disconnected (normal left inverted right x axis y axis) DP-1 disconnected (normal left inverted right x axis y axis) DP-2 disconnected (normal left inverted right x axis y axis) Let me know if any other information would be helpful. I have seen that there are some nvidia related issues that will hopefully be worked out. I just wanted to document my experience in case others have a similar problem. Peace - Anthony To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-settings/+bug/1307236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1303277] [NEW] [LENOVO 42919Q1] suspend/resume failure
Public bug reported: I was booting after power failure, and then crash... ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-22-generic 3.13.0-22.44 ProcVersionSignature: Ubuntu 3.13.0-22.44-generic 3.13.8 Uname: Linux 3.13.0-22-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.14.1-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xavier 2095 F pulseaudio Date: Sun Apr 6 11:20:31 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=6fce8fc2-f7bd-4d6d-8ba6-7be6284b1406 InstallationDate: Installed on 2012-11-20 (501 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) InterpreterPath: /usr/bin/python3.4 Lsusb: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: LENOVO 42919Q1 ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-22-generic root=UUID=42b8be86-c054-4e02-950a-c5f0b80236d4 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-22-generic N/A linux-backports-modules-3.13.0-22-generic N/A linux-firmware 1.127 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Title: [LENOVO 42919Q1] suspend/resume failure UpgradeStatus: Upgraded to trusty on 2014-03-13 (23 days ago) UserGroups: dmi.bios.date: 04/02/2012 dmi.bios.vendor: LENOVO dmi.bios.version: 8DET59WW (1.29 ) dmi.board.asset.tag: Not Available dmi.board.name: 42919Q1 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8DET59WW(1.29):bd04/02/2012:svnLENOVO:pn42919Q1:pvrThinkPadX220:rvnLENOVO:rn42919Q1:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 42919Q1 dmi.product.version: ThinkPad X220 dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-kerneloops resume suspend trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1303277 Title: [LENOVO 42919Q1] suspend/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: I was booting after power failure, and then crash... ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-22-generic 3.13.0-22.44 ProcVersionSignature: Ubuntu 3.13.0-22.44-generic 3.13.8 Uname: Linux 3.13.0-22-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.14.1-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xavier 2095 F pulseaudio Date: Sun Apr 6 11:20:31 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=6fce8fc2-f7bd-4d6d-8ba6-7be6284b1406 InstallationDate: Installed on 2012-11-20 (501 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) InterpreterPath: /usr/bin/python3.4 Lsusb: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: LENOVO 42919Q1 ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-22-generic root=UUID=42b8be86-c054-4e02-950a-c5f0b80236d4 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-22-generic N/A linux-backports-modules-3.13.0-22-generic N/A linux-firmware 1.127 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Title: [LENOVO 42919Q1] suspend/resume failure UpgradeStatus: Upgraded to trusty on 2014
[Kernel-packages] [Bug 1258838] Re: [Lenovo ThinkPad X230] suspend/resume failure
Upstream fixed this bug with commit 85fbd722ad0f5d64d1ad15888cd1eb2188bfb557. I didn't test that myself yet, but if that commit can be included in an ubuntu kernel package, I'll be happy to test to confirm if it works. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1258838 Title: [Lenovo ThinkPad X230] suspend/resume failure Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: I'm using a docking station. If I suspend the laptop when it is docked and resume after undocking it, the screen stay blank. I have to long- press the power button to reboot. This is a regression in 13.10, was working fine on 13.04 with the same laptop. WORKAROUND: If I remove the DVD reader from the docking station, then the issue is solved. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic ProcVersionSignature: Ubuntu 3.11.0-15.22-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xclaesse 2545 F pulseaudio Date: Fri Dec 6 19:20:26 2013 ExecutablePath: /usr/share/apport/apportcheckresume ExecutableTimestamp: 1382617300 Failure: suspend/resume InstallationDate: Installed on 2012-09-29 (434 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Beta amd64 (20120929) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 23252EG MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcCwd: / ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=UUID=c4842ed7-a8fc-40fd-8c31-909f1a5ce55a ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 SourcePackage: linux Title: [LENOVO 23252EG] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-09-27 (71 days ago) UserGroups: dmi.bios.date: 05/24/2012 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET31WW (1.11 ) dmi.board.asset.tag: Not Available dmi.board.name: 23252EG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET31WW(1.11):bd05/24/2012:svnLENOVO:pn23252EG:pvrThinkPadX230:rvnLENOVO:rn23252EG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 23252EG dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1258838/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1258838] Re: [Lenovo ThinkPad X230] suspend/resume failure
Actually that's the patch I tested earlier (minus small detail). So I can confirm it does fix the bug. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1258838 Title: [Lenovo ThinkPad X230] suspend/resume failure Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: I'm using a docking station. If I suspend the laptop when it is docked and resume after undocking it, the screen stay blank. I have to long- press the power button to reboot. This is a regression in 13.10, was working fine on 13.04 with the same laptop. WORKAROUND: If I remove the DVD reader from the docking station, then the issue is solved. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic ProcVersionSignature: Ubuntu 3.11.0-15.22-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xclaesse 2545 F pulseaudio Date: Fri Dec 6 19:20:26 2013 ExecutablePath: /usr/share/apport/apportcheckresume ExecutableTimestamp: 1382617300 Failure: suspend/resume InstallationDate: Installed on 2012-09-29 (434 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Beta amd64 (20120929) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 23252EG MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcCwd: / ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=UUID=c4842ed7-a8fc-40fd-8c31-909f1a5ce55a ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 SourcePackage: linux Title: [LENOVO 23252EG] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-09-27 (71 days ago) UserGroups: dmi.bios.date: 05/24/2012 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET31WW (1.11 ) dmi.board.asset.tag: Not Available dmi.board.name: 23252EG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET31WW(1.11):bd05/24/2012:svnLENOVO:pn23252EG:pvrThinkPadX230:rvnLENOVO:rn23252EG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 23252EG dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1258838/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1258838] Re: [Lenovo ThinkPad X230] suspend/resume failure
G2ET97WW (2.57 ) 10/25/2013 If I remove the DVD reader from the docking station, then the issue is solved. That really sounds like upstream bug https://bugzilla.kernel.org/show_bug.cgi?id=62801. There is a patch attached that I can test if needed, but I'm not sure how to build ubuntu kernel with that patch... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1258838 Title: [Lenovo ThinkPad X230] suspend/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: I'm using a docking station. If I suspend the laptop when it is docked and resume after undocking it, the screen stay blank. I have to long- press the power button to reboot. This is a regression in 13.10, was working fine on 13.04 with the same laptop. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic ProcVersionSignature: Ubuntu 3.11.0-15.22-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xclaesse 2545 F pulseaudio Date: Fri Dec 6 19:20:26 2013 ExecutablePath: /usr/share/apport/apportcheckresume ExecutableTimestamp: 1382617300 Failure: suspend/resume InstallationDate: Installed on 2012-09-29 (434 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Beta amd64 (20120929) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 23252EG MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcCwd: / ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=UUID=c4842ed7-a8fc-40fd-8c31-909f1a5ce55a ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 SourcePackage: linux Title: [LENOVO 23252EG] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-09-27 (71 days ago) UserGroups: dmi.bios.date: 05/24/2012 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET31WW (1.11 ) dmi.board.asset.tag: Not Available dmi.board.name: 23252EG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET31WW(1.11):bd05/24/2012:svnLENOVO:pn23252EG:pvrThinkPadX230:rvnLENOVO:rn23252EG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 23252EG dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1258838/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1258838] Re: [Lenovo ThinkPad X230] suspend/resume failure
I upgraded the BIOS with the bootable CD from the page you linked, did not change anything to the issue. ** Attachment added: Crash report with up to date BIOS https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1258838/+attachment/3931122/+files/susres.2013-12-17_14%3A23%3A28.089873.crash ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1258838 Title: [Lenovo ThinkPad X230] suspend/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: I'm using a docking station. If I suspend the laptop when it is docked and resume after undocking it, the screen stay blank. I have to long- press the power button to reboot. This is a regression in 13.10, was working fine on 13.04 with the same laptop. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic ProcVersionSignature: Ubuntu 3.11.0-15.22-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xclaesse 2545 F pulseaudio Date: Fri Dec 6 19:20:26 2013 ExecutablePath: /usr/share/apport/apportcheckresume ExecutableTimestamp: 1382617300 Failure: suspend/resume InstallationDate: Installed on 2012-09-29 (434 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Beta amd64 (20120929) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 23252EG MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcCwd: / ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=UUID=c4842ed7-a8fc-40fd-8c31-909f1a5ce55a ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 SourcePackage: linux Title: [LENOVO 23252EG] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-09-27 (71 days ago) UserGroups: dmi.bios.date: 05/24/2012 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET31WW (1.11 ) dmi.board.asset.tag: Not Available dmi.board.name: 23252EG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET31WW(1.11):bd05/24/2012:svnLENOVO:pn23252EG:pvrThinkPadX230:rvnLENOVO:rn23252EG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 23252EG dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1258838/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1258838] Re: [Lenovo ThinkPad X230] suspend/resume failure
** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1258838 Title: [Lenovo ThinkPad X230] suspend/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: I'm using a docking station. If I suspend the laptop when it is docked and resume after undocking it, the screen stay blank. I have to long- press the power button to reboot. This is a regression in 13.10, was working fine on 13.04 with the same laptop. WORKAROUND: If I remove the DVD reader from the docking station, then the issue is solved. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic ProcVersionSignature: Ubuntu 3.11.0-15.22-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xclaesse 2545 F pulseaudio Date: Fri Dec 6 19:20:26 2013 ExecutablePath: /usr/share/apport/apportcheckresume ExecutableTimestamp: 1382617300 Failure: suspend/resume InstallationDate: Installed on 2012-09-29 (434 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Beta amd64 (20120929) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 23252EG MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcCwd: / ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=UUID=c4842ed7-a8fc-40fd-8c31-909f1a5ce55a ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 SourcePackage: linux Title: [LENOVO 23252EG] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-09-27 (71 days ago) UserGroups: dmi.bios.date: 05/24/2012 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET31WW (1.11 ) dmi.board.asset.tag: Not Available dmi.board.name: 23252EG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET31WW(1.11):bd05/24/2012:svnLENOVO:pn23252EG:pvrThinkPadX230:rvnLENOVO:rn23252EG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 23252EG dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1258838/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1258838] Re: [Lenovo ThinkPad X230] suspend/resume failure
I've rebuild ubuntu kernel 3.11.0-14 with the upstream patch applied[1] and that fixed the issue. [1] https://bugzilla.kernel.org/attachment.cgi?id=118791action=diff -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1258838 Title: [Lenovo ThinkPad X230] suspend/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: I'm using a docking station. If I suspend the laptop when it is docked and resume after undocking it, the screen stay blank. I have to long- press the power button to reboot. This is a regression in 13.10, was working fine on 13.04 with the same laptop. WORKAROUND: If I remove the DVD reader from the docking station, then the issue is solved. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic ProcVersionSignature: Ubuntu 3.11.0-15.22-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xclaesse 2545 F pulseaudio Date: Fri Dec 6 19:20:26 2013 ExecutablePath: /usr/share/apport/apportcheckresume ExecutableTimestamp: 1382617300 Failure: suspend/resume InstallationDate: Installed on 2012-09-29 (434 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Beta amd64 (20120929) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 23252EG MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcCwd: / ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=UUID=c4842ed7-a8fc-40fd-8c31-909f1a5ce55a ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 SourcePackage: linux Title: [LENOVO 23252EG] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-09-27 (71 days ago) UserGroups: dmi.bios.date: 05/24/2012 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET31WW (1.11 ) dmi.board.asset.tag: Not Available dmi.board.name: 23252EG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET31WW(1.11):bd05/24/2012:svnLENOVO:pn23252EG:pvrThinkPadX230:rvnLENOVO:rn23252EG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 23252EG dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1258838/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1258838] Re: [Lenovo ThinkPad X230] suspend/resume failure
Note that the upstream patch says it's an ugly hack. I don't know if they'll apply that or work on better solution. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1258838 Title: [Lenovo ThinkPad X230] suspend/resume failure Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: I'm using a docking station. If I suspend the laptop when it is docked and resume after undocking it, the screen stay blank. I have to long- press the power button to reboot. This is a regression in 13.10, was working fine on 13.04 with the same laptop. WORKAROUND: If I remove the DVD reader from the docking station, then the issue is solved. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic ProcVersionSignature: Ubuntu 3.11.0-15.22-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xclaesse 2545 F pulseaudio Date: Fri Dec 6 19:20:26 2013 ExecutablePath: /usr/share/apport/apportcheckresume ExecutableTimestamp: 1382617300 Failure: suspend/resume InstallationDate: Installed on 2012-09-29 (434 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Beta amd64 (20120929) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 23252EG MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcCwd: / ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=UUID=c4842ed7-a8fc-40fd-8c31-909f1a5ce55a ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 SourcePackage: linux Title: [LENOVO 23252EG] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-09-27 (71 days ago) UserGroups: dmi.bios.date: 05/24/2012 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET31WW (1.11 ) dmi.board.asset.tag: Not Available dmi.board.name: 23252EG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET31WW(1.11):bd05/24/2012:svnLENOVO:pn23252EG:pvrThinkPadX230:rvnLENOVO:rn23252EG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 23252EG dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1258838/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1258838] Re: [LENOVO 23252EG] suspend/resume failure
Booted on 3.13.0-031300rc3-generic from the link above and system crash on resume still happens. ** Tags added: kernel-bug-exists-upstream -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1258838 Title: [LENOVO 23252EG] suspend/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: I'm using a docking station. If I suspend the laptop when it is docked and resume after undocking it, the screen stay blank. I have to long- press the power button to reboot. This is a regression in 13.10, was working fine on 13.04 with the same laptop. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic ProcVersionSignature: Ubuntu 3.11.0-15.22-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xclaesse 2545 F pulseaudio Date: Fri Dec 6 19:20:26 2013 ExecutablePath: /usr/share/apport/apportcheckresume ExecutableTimestamp: 1382617300 Failure: suspend/resume InstallationDate: Installed on 2012-09-29 (434 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Beta amd64 (20120929) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 23252EG MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcCwd: / ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=UUID=c4842ed7-a8fc-40fd-8c31-909f1a5ce55a ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 SourcePackage: linux Title: [LENOVO 23252EG] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-09-27 (71 days ago) UserGroups: dmi.bios.date: 05/24/2012 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET31WW (1.11 ) dmi.board.asset.tag: Not Available dmi.board.name: 23252EG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET31WW(1.11):bd05/24/2012:svnLENOVO:pn23252EG:pvrThinkPadX230:rvnLENOVO:rn23252EG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 23252EG dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1258838/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1258838] Re: [LENOVO 23252EG] suspend/resume failure
** Attachment added: The crash report on mainling kernel https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1258838/+attachment/3926311/+files/susres.2013-12-09_16%3A48%3A49.212872.crash ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1258838 Title: [LENOVO 23252EG] suspend/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: I'm using a docking station. If I suspend the laptop when it is docked and resume after undocking it, the screen stay blank. I have to long- press the power button to reboot. This is a regression in 13.10, was working fine on 13.04 with the same laptop. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic ProcVersionSignature: Ubuntu 3.11.0-15.22-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xclaesse 2545 F pulseaudio Date: Fri Dec 6 19:20:26 2013 ExecutablePath: /usr/share/apport/apportcheckresume ExecutableTimestamp: 1382617300 Failure: suspend/resume InstallationDate: Installed on 2012-09-29 (434 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Beta amd64 (20120929) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 23252EG MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcCwd: / ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=UUID=c4842ed7-a8fc-40fd-8c31-909f1a5ce55a ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 SourcePackage: linux Title: [LENOVO 23252EG] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-09-27 (71 days ago) UserGroups: dmi.bios.date: 05/24/2012 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET31WW (1.11 ) dmi.board.asset.tag: Not Available dmi.board.name: 23252EG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET31WW(1.11):bd05/24/2012:svnLENOVO:pn23252EG:pvrThinkPadX230:rvnLENOVO:rn23252EG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 23252EG dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1258838/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1258838] Re: [LENOVO 23252EG] suspend/resume failure
This upstream kernel bug seems to describe the same symptoms: https://bugzilla.kernel.org/show_bug.cgi?id=62801. If you can provide .deb packages with 839a8e8660b6777e7fe4e80af1a048aebe2b5977 reverted, I'll test it. ** Bug watch added: Linux Kernel Bug Tracker #62801 http://bugzilla.kernel.org/show_bug.cgi?id=62801 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1258838 Title: [LENOVO 23252EG] suspend/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: I'm using a docking station. If I suspend the laptop when it is docked and resume after undocking it, the screen stay blank. I have to long- press the power button to reboot. This is a regression in 13.10, was working fine on 13.04 with the same laptop. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic ProcVersionSignature: Ubuntu 3.11.0-15.22-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xclaesse 2545 F pulseaudio Date: Fri Dec 6 19:20:26 2013 ExecutablePath: /usr/share/apport/apportcheckresume ExecutableTimestamp: 1382617300 Failure: suspend/resume InstallationDate: Installed on 2012-09-29 (434 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Beta amd64 (20120929) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 23252EG MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcCwd: / ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=UUID=c4842ed7-a8fc-40fd-8c31-909f1a5ce55a ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 SourcePackage: linux Title: [LENOVO 23252EG] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-09-27 (71 days ago) UserGroups: dmi.bios.date: 05/24/2012 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET31WW (1.11 ) dmi.board.asset.tag: Not Available dmi.board.name: 23252EG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET31WW(1.11):bd05/24/2012:svnLENOVO:pn23252EG:pvrThinkPadX230:rvnLENOVO:rn23252EG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 23252EG dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1258838/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1258838] [NEW] [LENOVO 23252EG] suspend/resume failure
Public bug reported: I'm using a docking station. If I suspend the laptop when it is docked and resume after undocking it, the screen stay blank. I have to long- press the power button to reboot. This is a regression in 13.10, was working fine on 13.04 with the same laptop. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic ProcVersionSignature: Ubuntu 3.11.0-15.22-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xclaesse 2545 F pulseaudio Date: Fri Dec 6 19:20:26 2013 ExecutablePath: /usr/share/apport/apportcheckresume ExecutableTimestamp: 1382617300 Failure: suspend/resume InstallationDate: Installed on 2012-09-29 (434 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Beta amd64 (20120929) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 23252EG MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcCwd: / ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=UUID=c4842ed7-a8fc-40fd-8c31-909f1a5ce55a ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 SourcePackage: linux Title: [LENOVO 23252EG] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-09-27 (71 days ago) UserGroups: dmi.bios.date: 05/24/2012 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET31WW (1.11 ) dmi.board.asset.tag: Not Available dmi.board.name: 23252EG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET31WW(1.11):bd05/24/2012:svnLENOVO:pn23252EG:pvrThinkPadX230:rvnLENOVO:rn23252EG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 23252EG dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-kerneloops resume suspend -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1258838 Title: [LENOVO 23252EG] suspend/resume failure Status in “linux” package in Ubuntu: New Bug description: I'm using a docking station. If I suspend the laptop when it is docked and resume after undocking it, the screen stay blank. I have to long- press the power button to reboot. This is a regression in 13.10, was working fine on 13.04 with the same laptop. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic ProcVersionSignature: Ubuntu 3.11.0-15.22-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: xclaesse 2545 F pulseaudio Date: Fri Dec 6 19:20:26 2013 ExecutablePath: /usr/share/apport/apportcheckresume ExecutableTimestamp: 1382617300 Failure: suspend/resume InstallationDate: Installed on 2012-09-29 (434 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Beta amd64 (20120929) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 23252EG MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcCwd: / ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=UUID=c4842ed7-a8fc-40fd-8c31-909f1a5ce55a ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 SourcePackage: linux Title: [LENOVO 23252EG] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-09-27 (71 days ago) UserGroups: dmi.bios.date: 05/24/2012 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET31WW (1.11 ) dmi.board.asset.tag: Not Available dmi.board.name: 23252EG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset
[Kernel-packages] [Bug 1101883] Re: 14e4:16bc Sandisk Extreme 32GB Class 10 45MB/s not readable in Acer Aspire V3-571G-9686
Hey Michele, I guess we are been answered by a bot or something. Still hoping we'll get a human reply... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1101883 Title: 14e4:16bc Sandisk Extreme 32GB Class 10 45MB/s not readable in Acer Aspire V3-571G-9686 Status in “linux” package in Ubuntu: Incomplete Bug description: SD cards with capacity 2Gb and less work fine. WINTEC 8GB Class 10 SDHC got recognized and mounted. However, Sandisk Extreme 32GB Class 10 45MB/s does not get recognized. Card reader: 02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10) kernel.log : Jan 19 14:58:32 super-pc kernel: [ 2499.254007] mmc0: error -110 whilst initialising SD card Jan 19 14:58:34 super-pc kernel: [ 2501.131883] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 Reverse mainline kernel version bisect revealed: v3.8-rc4 bad v3.10-rc3 good -- ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: linux-image-3.5.0-22-generic 3.5.0-22.34 ProcVersionSignature: Ubuntu 3.5.0-22.34-generic 3.5.7.2 Uname: Linux 3.5.0-22-generic x86_64 ApportVersion: 2.6.1-0ubuntu9 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: bowman 1840 F pulseaudio Date: Sat Jan 19 15:00:13 2013 HibernationDevice: RESUME=UUID=b8de7016-0d87-4aae-9f1b-e08b43bacb75 InstallationDate: Installed on 2013-01-19 (0 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MachineType: Acer Aspire V3-571G MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-22-generic root=UUID=987c7361-c40b-4803-94c4-691a9b51865f ro acpi_osi=Linux quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.5.0-22-generic N/A linux-backports-modules-3.5.0-22-generic N/A linux-firmware1.95 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/14/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.04 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.04 dmi.modalias: dmi:bvnAcer:bvrV2.04:bd09/14/2012:svnAcer:pnAspireV3-571G:pvrV2.04:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.04: dmi.product.name: Aspire V3-571G dmi.product.version: V2.04 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1101883/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 642930] Re: linux-image-virtual - No watchdog drivers enabled.
The watchdog drivers are present in the linux-image-extra-*-virtual package. Since they are not added installed by default to virtual installed, they must be manually installed by issuing the following command in the virtual machine. sudo apt-get install linux-image-extra-virtual Ubuntu disables by default all watchdog devices, so once you've installed the watchdog daemon, you'll have to add your device's driver to your /etc/module -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/642930 Title: linux-image-virtual - No watchdog drivers enabled. Status in “linux” package in Ubuntu: Confirmed Bug description: In KVM there is support for two different watchdog hardwares so it can reboot the VM if the machine stops responding, this is all pretty useless when the virtual kernel lacks support for watchdogs. =) (Tested on Lucid) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/642930/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
Yes indeed : kubuntu saucy is now installable without any extra option. All the other issues (sound and touchpad) are solved in 3.12-rc3 except the libata.force=noncq story. Thanks. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Fix Released Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Fix Released Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
Maybe we should setup a wiki but let me ask a side question here: How do you get the wifi up and running on a 3.12-rc1?? I have tried to install bcmwl-kernel-source and/or to follow the instructions of http://uli-heller.github.io/blog/2013/06/24/macbook-air/ Whatever I do, I see my wifi network but it does not connect (wpa/wpa2 personnal). Any ideas? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1101883] Re: 14e4:16bc Sandisk Extreme 32GB Class 10 45MB/s not readable in Acer Aspire V3-571G-9686
No, I don't. I just want to know what I asked, with all respect, please. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1101883 Title: 14e4:16bc Sandisk Extreme 32GB Class 10 45MB/s not readable in Acer Aspire V3-571G-9686 Status in “linux” package in Ubuntu: Incomplete Bug description: SD cards with capacity 2Gb and less work fine. WINTEC 8GB Class 10 SDHC got recognized and mounted. However, Sandisk Extreme 32GB Class 10 45MB/s does not get recognized. Card reader: 02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10) kernel.log : Jan 19 14:58:32 super-pc kernel: [ 2499.254007] mmc0: error -110 whilst initialising SD card Jan 19 14:58:34 super-pc kernel: [ 2501.131883] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 Reverse mainline kernel version bisect revealed: v3.8-rc4 bad v3.10-rc3 good -- ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: linux-image-3.5.0-22-generic 3.5.0-22.34 ProcVersionSignature: Ubuntu 3.5.0-22.34-generic 3.5.7.2 Uname: Linux 3.5.0-22-generic x86_64 ApportVersion: 2.6.1-0ubuntu9 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: bowman 1840 F pulseaudio Date: Sat Jan 19 15:00:13 2013 HibernationDevice: RESUME=UUID=b8de7016-0d87-4aae-9f1b-e08b43bacb75 InstallationDate: Installed on 2013-01-19 (0 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MachineType: Acer Aspire V3-571G MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-22-generic root=UUID=987c7361-c40b-4803-94c4-691a9b51865f ro acpi_osi=Linux quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.5.0-22-generic N/A linux-backports-modules-3.5.0-22-generic N/A linux-firmware1.95 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/14/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.04 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.04 dmi.modalias: dmi:bvnAcer:bvrV2.04:bd09/14/2012:svnAcer:pnAspireV3-571G:pvrV2.04:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.04: dmi.product.name: Aspire V3-571G dmi.product.version: V2.04 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1101883/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
** Changed in: linux (Ubuntu Saucy) Status: Triaged = Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Fix Committed Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Fix Committed Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
Set to Fix Committed according to http://marc.info/?l=linux-kernelm=137811791207884w=2 but I'm not sure if it is correct : we have patch upstream to be committed in 3.12. However, I not quite sure about the process to have this patch applied in 3.11.X Stable and in the ubuntu default kernel for 13.10. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Fix Committed Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Fix Committed Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1101883] Re: 14e4:16bc Sandisk Extreme 32GB Class 10 45MB/s not readable in Acer Aspire V3-571G-9686
Christopher, kernel v3.10-rc3 fixed bowman's bug. When is this going upstream on Ubuntu? Any plans? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1101883 Title: 14e4:16bc Sandisk Extreme 32GB Class 10 45MB/s not readable in Acer Aspire V3-571G-9686 Status in “linux” package in Ubuntu: Incomplete Bug description: SD cards with capacity 2Gb and less work fine. WINTEC 8GB Class 10 SDHC got recognized and mounted. However, Sandisk Extreme 32GB Class 10 45MB/s does not get recognized. Card reader: 02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10) kernel.log : Jan 19 14:58:32 super-pc kernel: [ 2499.254007] mmc0: error -110 whilst initialising SD card Jan 19 14:58:34 super-pc kernel: [ 2501.131883] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 Reverse mainline kernel version bisect revealed: v3.8-rc4 bad v3.10-rc3 good -- ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: linux-image-3.5.0-22-generic 3.5.0-22.34 ProcVersionSignature: Ubuntu 3.5.0-22.34-generic 3.5.7.2 Uname: Linux 3.5.0-22-generic x86_64 ApportVersion: 2.6.1-0ubuntu9 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: bowman 1840 F pulseaudio Date: Sat Jan 19 15:00:13 2013 HibernationDevice: RESUME=UUID=b8de7016-0d87-4aae-9f1b-e08b43bacb75 InstallationDate: Installed on 2013-01-19 (0 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MachineType: Acer Aspire V3-571G MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-22-generic root=UUID=987c7361-c40b-4803-94c4-691a9b51865f ro acpi_osi=Linux quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.5.0-22-generic N/A linux-backports-modules-3.5.0-22-generic N/A linux-firmware1.95 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/14/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.04 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.04 dmi.modalias: dmi:bvnAcer:bvrV2.04:bd09/14/2012:svnAcer:pnAspireV3-571G:pvrV2.04:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.04: dmi.product.name: Aspire V3-571G dmi.product.version: V2.04 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1101883/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
Do we have an open kernel bug on the audio issue? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
To sum up for newcomers The patch of #54 allows to boot in EFI mode without any special grub option and it just works. If you boot in legac bios mode, you still need the nosmp option to boot. I'm not quite sure about the simplest way to install (k)ubuntu direclty in EFI mode. It would be nice if someone could update the wiki to explain that. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
Great! I'm going to test that asap. With this patch, is it suppose to boot without extra option? or do we still need acpi=off or whatever else? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
It works. Thanks. This patch should find its way in 3.11.X or at least in the ubuntu kernel before 13.10 release. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
I did the same with the current vanilla git (3.11-rc7) but it is still stuck at loadig initial ramdisk. I did a make odlconfig. could be that there is on option missing somewhere and/or my EFI install is buggy. Imre Kaloz is going to tell us what's going on :) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
According to http://phoronix.com/forums/showthread.php?83754-Linux-Can-Work-On-The-2013-MacBook-Air/page2 3.11.0-rc5 and 3.10 boot on a mac book air 13 (i7 ?) Ok it's not the same as the 11 i5 but still...could it be that there is a bug somewhere in the ubuntu boot chain of 13.10 alpha and not in the kernel?? firmware incompatibility, modules compiled with on version of gcc and whatever else with another or I don't know what. Did you try 3.1x on fedora, archlinux or whatever? Did you try to boot a vanilla 3.11-rc7 wiht a minimal .config ? (I'm going to try that asap). Before starting a long biscet process between 3.9.11 (ok) and 3.10-rc1 (no boot) I would like ot be sure it's a bug in the kernel (and not in grub EFI or whatever else I'm not familiar with). -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
Ho great! I'm eager to know where the bug was. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
From http://kernel.ubuntu.com/~kernel-ppa/mainline/ : 3.9.11 is Ok. 3.10-rc1 is not. I don't have a lot of time this week to try to bisect that. Could someone confirm this finding and figure out where the pb could come from? It looks like we have a real kernel bug here. However, I ahve no idea how to report it in a usefull way. Do you know how to make-kpkg compile a kernel with pr_debug enable?? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
@Imre Kaloz : ok so you think it's a real issue in the kernel (and not an issue in my grub config)? I'm going to check it by installing a 3.8. If it's boots then yes it's an issue in the kernel. I would be happy to help to debug this potential kernel issue but what can I do as the boot process get stuck as early as Loading initial ramdisk? Is there any boot options related to UEFI we should try? (sorry I'm a fresh man when it comes to UEFI related issues). -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
ok I'm also booting 3.8 and 3.9 without issue using rEFIng + grub-EFI. 3.10 and 3.11 rc get stuck at Loading initial ramdisk @kaloz : Tell us if you have a patch to be tested. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
Ok I have used boot-repair to convert it to EFI and reinstall rEFInd and I see 4 CPUs with a 3.9.11. Great! For an unkown reason, the boot gets stuck at Loading initial ramdisk with a 3.11 rc but it must be something else (maybe a boot repair got confused...I'm going to check my grub config (I suppose grub-EFI config files are the same as the grug legacy ones). -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
Is it supposed to work automatically when a new kernel is apt-get installed or should we do some manual magic in /boot/efi or whatever else??? I'm asking because I only able to boot one kernel. All the other kernels are stuck at Loading initial ramdisk. My Boot Info Script : http://paste.ubuntu.com/6030209/ I know it's another bug but I want to make sure that it really works well in EFI mode before saying that I don't care about the failure in legacy bios mode. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
Hi Sean, Ok! thanks at lot. Apple has zero interest in fixing the legacy BIOS. Therefore I assume they will never do it. It's very unlikely that this is a bug in the kernel. It's even more unlikely that this problem exists with another hardware. I have updated the https://bugzilla.kernel.org/show_bug.cgi?id=60635 accordingly. I won't have time test this week end but I'm going to do it asap :) It would be great if someone with some EFI boot experience could update the wiki. Xavier -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
We should try to keep this bug report as clean as possible: On mac books air 11 i5 and without any specific boot option, the boot process get stuck at: smpboot: Booting Node 0, Processors #1 That *one* bug. Do you see the *same* bug ( it does not boot is to vague. it recovery mode you can check if it gets stuck at smpboot: Booting Node 0, Processors #1) on 13 and/or on mac book air equiped with i7? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
We ahve to be more precise : **We see this bug on 11 i5 machines**. It's now a bit confusing on the kernel bugzilla because we are talking about different hardware config. Sean V Kelley : Do you have an 11 i5 ? (if it is the case then I puzzled). If you have a 13 or/and i7, have a look at comment #1 of this thread and try to figure out how much your hardware if different. Do you boot using EFI or the emulated bios method? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197451] Re: Ubuntu fails to properly boot on Macbook Air 2013 6, 1 6, 2
ok but you qre using only one core. That's not a decent solution. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197451 Title: Ubuntu fails to properly boot on Macbook Air 2013 6,1 6,2 Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Precise: Triaged Status in “linux” source package in Quantal: Triaged Status in “linux” source package in Raring: Triaged Status in “linux” source package in Saucy: Triaged Bug description: Ubuntu fails to properly boot on Macbook Air 2013 6,1 Ubuntu fails to boot the 13.10 live image from usb without specifying acpi-off as a boot parameter. After installation is complete the boot process hangs at a purple screen. Booting into recovery mode shows that the process stops at the following: smpboot: Booting Node 0, #1 I've tried 12.04.2, 13.04, and 13.10. I've also tried booting with kernel ver 3.9.8-030908-generic and the result is the same. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.9 ProcVersionSignature: Ubuntu 3.10.0-2.9-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2885 F pulseaudio /dev/snd/controlC0: ubuntu 2885 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.335 Date: Wed Jul 3 15:31:42 2013 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64+mac (20130703) MachineType: Apple Inc. MacBookAir6,1 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash acpi=off BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B00.1305241529 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-35C1E88140C3E6CF dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-35C1E88140C3E6CF dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B00.1305241529:bd05/24/2013:svnAppleInc.:pnMacBookAir6,1:pvr1.0:rvnAppleInc.:rnMac-35C1E88140C3E6CF:rvrMacBookAir6,1:cvnAppleInc.:ct10:cvrMac-35C1E88140C3E6CF: dmi.product.name: MacBookAir6,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1197451/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
