[Kernel-packages] [Bug 1857385] Re: xHCI host controller not responding, assume dead via USB-C docking station
Tested, still the same results: no usb available after the undock on laptop (I had a pendrive attached to test) uname -a Linux 5.3.0-27-generic #29~lp1857385 SMP Fri Jan 3 21:30:32 CST 2020 x86_64 x86_64 x86_64 GNU/Linux dmesg when I undock the laptop: [ 129.399949] usb 2-1: USB disconnect, device number 2 [ 129.417254] [drm] DM_MST: stopping TM on aconnector: 76d67240 [id: 77] [ 129.417557] [drm] DM_MST: Disabling connector: 242d96de [id: 81] [master: 76d67240] [ 129.418358] [drm] DM_MST: Disabling connector: 3436afd3 [id: 86] [master: 76d67240] [ 129.418543] [drm] DM_MST: Disabling connector: 1b62a1c6 [id: 91] [master: 76d67240] [ 129.431465] usb 3-4: USB disconnect, device number 2 [ 129.431478] usb 3-4.2: USB disconnect, device number 3 [ 129.467388] r8169 :03:00.0 enp3s0f0: Link is Down [ 129.581266] usb 2-4: USB disconnect, device number 3 [ 129.581280] usb 2-4.2: USB disconnect, device number 4 [ 129.581288] usb 2-4.2.4: USB disconnect, device number 6 [ 131.262762] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 131.262932] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of lines (the same) [ 134.530663] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 135.983562] [drm] Fence fallback timer expired on ring sdma0 [ 135.987559] [drm] Fence fallback timer expired on ring gfx [ 136.495422] [drm] Fence fallback timer expired on ring sdma0 [ 137.007323] [drm] Fence fallback timer expired on ring sdma0 [ 137.519202] [drm] Fence fallback timer expired on ring sdma0 [ 138.031056] [drm] Fence fallback timer expired on ring sdma0 [ 142.290091] iwlwifi :01:00.0: Error sending STATISTICS_CMD: time out after 2000ms. [ 142.290101] iwlwifi :01:00.0: Current CMD queue read_ptr 176 write_ptr 177 [ 142.292482] iwlwifi :01:00.0: Start IWL Error Log Dump: [ 142.292486] iwlwifi :01:00.0: Status: 0x0080, count: 6 [ 142.292491] iwlwifi :01:00.0: Loaded firmware version: 46.6bf1df06.0 [ 142.292495] iwlwifi :01:00.0: 0x0071 | NMI_INTERRUPT_UMAC_FATAL [ 142.292499] iwlwifi :01:00.0: 0x26F4 | trm_hw_status0 [ 142.292502] iwlwifi :01:00.0: 0x | trm_hw_status1 [ 142.292506] iwlwifi :01:00.0: 0x0048853E | branchlink2 [ 142.292509] iwlwifi :01:00.0: 0x00192402 | interruptlink1 [ 142.292512] iwlwifi :01:00.0: 0x00479392 | interruptlink2 [ 142.292515] iwlwifi :01:00.0: 0x0001ACA2 | data1 [ 142.292518] iwlwifi :01:00.0: 0xFF001000 | data2 [ 142.292521] iwlwifi :01:00.0: 0xF000 | data3 [ 142.292524] iwlwifi :01:00.0: 0x4780C555 | beacon time [ 142.292527] iwlwifi :01:00.0: 0x059DFF69 | tsf low [ 142.292529] iwlwifi :01:00.0: 0x0163 | tsf hi [ 142.292532] iwlwifi :01:00.0: 0x | time gp1 [ 142.292535] iwlwifi :01:00.0: 0x08362F53 | time gp2 [ 142.292538] iwlwifi :01:00.0: 0x0001 | uCode revision type [ 142.292541] iwlwifi :01:00.0: 0x002E | uCode version major [ 142.292543] iwlwifi :01:00.0: 0x6BF1DF06 | uCode version minor [ 142.292546] iwlwifi :01:00.0: 0x0321 | hw version [ 142.292549] iwlwifi :01:00.0: 0x00C89004 | board version [ 142.292551] iwlwifi :01:00.0: 0x001C | hcmd [ 142.292554] iwlwifi :01:00.0: 0x80022002 | isr0 [ 142.292557] iwlwifi :01:00.0: 0x | isr1 [ 142.292559] iwlwifi :01:00.0: 0x08101002 | isr2 [ 142.292562] iwlwifi :01:00.0: 0x404000C6 | isr3 [ 142.292565] iwlwifi :01:00.0: 0x | isr4 [ 142.292567] iwlwifi :01:00.0: 0x0B48001C | last cmd Id [ 142.292570] iwlwifi :01:00.0: 0x0001ACA2 | wait_event [ 142.292573] iwlwifi :01:00.0: 0x | l2p_control [ 142.292576] iwlwifi :01:00.0: 0x2020 | l2p_duration [ 142.292578] iwlwifi :01:00.0: 0x | l2p_mhvalid [ 142.292581] iwlwifi :01:00.0: 0x | l2p_addr_match [ 142.292584] iwlwifi :01:00.0: 0x000D | lmpm_pmg_sel [ 142.292586] iwlwifi :01:00.0: 0x08081424 | timestamp [ 142.292589] iwlwifi :01:00.0: 0x38EC | flow_handler [ 142.292698] iwlwifi :01:00.0: Start IWL Error Log Dump: [ 142.292701] iwlwifi :01:00.0: Status: 0x0080, count: 7 [ 142.292704] iwlwifi :01:00.0: 0x2066 | NMI_INTERRUPT_HOST [ 142.292707] iwlwifi :01:00.0: 0x | umac branchlink1 [ 142.292709] iwlwifi :01:00.0: 0xC00E | umac branchlink2 [ 142.292712] iwlwifi :01:00.0: 0x | umac interruptlink1 [ 142.292715] iwlwifi :01:00.0: 0x8044FE76 | umac interruptlink2 [ 142.292718] iwlwifi :01:00.0: 0x0100 | umac data1 [ 142.292720] iwlwifi :01:00.0: 0x8044FE76 | umac data2 [ 142.292723] iwlwifi :01:00.0: 0xDEADBEEF | umac data3 [ 142.292726] iwlwifi :01:00.0: 0x002E | umac major [ 142.292728] iwlwifi :01:00.0: 0x6BF1DF06 | umac minor [ 142.292731] iwlwifi :01:00.0: 0x08362EE9 | frame pointer [ 142.292733] iwlwifi
[Kernel-packages] [Bug 1857385] Re: xHCI host controller not responding, assume dead via USB-C docking station
tested but it's still stucking the usb hub. After the undock I need to run the reset of the USB hub to have it working. Undock: [ 84.219765] usb 2-1: USB disconnect, device number 2 [ 84.225638] [drm] DM_MST: stopping TM on aconnector: da0f527b [id: 78] [ 84.225876] [drm] DM_MST: Disabling connector: 63ebb1ca [id: 83] [master: da0f527b] [ 84.227747] [drm] DM_MST: Disabling connector: 4a641ca6 [id: 88] [master: da0f527b] [ 84.228238] [drm] DM_MST: Disabling connector: c365f2c1 [id: 93] [master: da0f527b] [ 84.255498] usb 3-4: USB disconnect, device number 2 [ 84.255516] usb 3-4.2: USB disconnect, device number 3 [ 84.255528] usb 3-4.2.2: USB disconnect, device number 4 [ 84.285331] r8169 :03:00.0 enp3s0f0: Link is Down [ 84.380070] usb 2-4: USB disconnect, device number 3 [ 84.380088] usb 2-4.2: USB disconnect, device number 4 [ 84.380101] usb 2-4.2.4: USB disconnect, device number 6 [ 84.590759] usb 2-4.3: USB disconnect, device number 5 [ 94.852024] xhci_hcd :05:00.3: Abort failed to stop command ring: -110 [ 94.863836] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 94.863859] xhci_hcd :05:00.3: HC died; cleaning up [ 94.863951] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 94.865041] usb 2-4.5: USB disconnect, device number 7 Dock: [ 147.920108] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 148.973615] [drm] DM_MST: starting TM on aconnector: da0f527b [id: 78] [ 149.070161] [drm] DM_MST: added connector: 1e859739 [id: 101] [master: da0f527b] [ 149.070321] [drm] DM_MST: added connector: 761fd001 [id: 106] [master: da0f527b] [ 149.070414] [drm] DM_MST: added connector: f8739422 [id: 117] [master: da0f527b] unbind/bind manually/via script: [ 197.186295] xhci_hcd :05:00.3: remove, state 1 [ 197.186302] usb usb3: USB disconnect, device number 1 [ 197.186786] xhci_hcd :05:00.3: USB bus 3 deregistered [ 197.186850] xhci_hcd :05:00.3: remove, state 1 [ 197.186854] usb usb2: USB disconnect, device number 1 [ 197.187771] xhci_hcd :05:00.3: USB bus 2 deregistered [ 197.188174] xhci_hcd :05:00.4: remove, state 4 [ 197.188181] usb usb5: USB disconnect, device number 1 [ 197.188540] xhci_hcd :05:00.4: USB bus 5 deregistered [ 197.188560] xhci_hcd :05:00.4: remove, state 1 [ 197.188567] usb usb4: USB disconnect, device number 1 [ 197.188569] usb 4-1: USB disconnect, device number 2 [ 197.189511] usb 4-2: USB disconnect, device number 3 [ 197.189517] usb 4-2.1: USB disconnect, device number 4 [ 197.262799] usb 4-2.4: USB disconnect, device number 5 [ 197.312146] xhci_hcd :05:00.4: Host halt failed, -110 [ 197.312149] xhci_hcd :05:00.4: Host controller not halted, aborting reset. [ 197.312483] xhci_hcd :05:00.4: USB bus 4 deregistered [ 198.315237] xhci_hcd :05:00.3: xHCI Host Controller [ 198.315247] xhci_hcd :05:00.3: new USB bus registered, assigned bus number 2 [ 198.315424] xhci_hcd :05:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x00084410 [ 198.316177] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 [ 198.316181] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 198.316184] usb usb2: Product: xHCI Host Controller [ 198.316187] usb usb2: Manufacturer: Linux 5.5.0-050500rc3-generic xhci-hcd [ 198.316189] usb usb2: SerialNumber: :05:00.3 [ 198.316472] hub 2-0:1.0: USB hub found [ 198.316514] hub 2-0:1.0: 4 ports detected [ 198.317303] xhci_hcd :05:00.3: xHCI Host Controller [ 198.317310] xhci_hcd :05:00.3: new USB bus registered, assigned bus number 3 [ 198.317315] xhci_hcd :05:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 198.317372] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 198.317432] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05 [ 198.317435] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 198.317436] usb usb3: Product: xHCI Host Controller [ 198.317438] usb usb3: Manufacturer: Linux 5.5.0-050500rc3-generic xhci-hcd [ 198.317440] usb usb3: SerialNumber: :05:00.3 [ 198.317632] hub 3-0:1.0: USB hub found [ 198.317651] hub 3-0:1.0: 4 ports detected [ 198.318427] xhci_hcd :05:00.4: xHCI Host Controller [ 198.318435] xhci_hcd :05:00.4: new USB bus registered, assigned bus number 4 [ 198.318644] xhci_hcd :05:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x00084410 [ 198.319507] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 [ 198.319510] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 198.319512] usb usb4: Product: xHCI Host Controller [ 198.319514] usb usb4: Manufacturer: Linux
[Kernel-packages] [Bug 1857385] Re: xHCI host controller not responding, assume dead via USB-C docking station
just for info : I tried also the kernel provided by https://launchpad.net/~kaihengfeng on post 90 ( https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/90) but nothing changed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: Confirmed Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
[Kernel-packages] [Bug 1857385] Re: xHCI host controller not responding, assume dead via USB-C docking station
** Description changed: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. - The bios and firmware of the docking station are updated at the last one + The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] - Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] 00:01.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] 00:01.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] 00:01.7 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] 00:08.0 Host bridge:
[Kernel-packages] [Bug 1857385] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1857385/+attachment/5314920/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: New Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD]
[Kernel-packages] [Bug 1857385] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1857385/+attachment/5314919/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: New Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2
[Kernel-packages] [Bug 1857385] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1857385/+attachment/5314918/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: New Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2
[Kernel-packages] [Bug 1857385] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1857385/+attachment/5314917/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: New Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD]
[Kernel-packages] [Bug 1857385] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1857385/+attachment/5314913/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: New Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe
[Kernel-packages] [Bug 1857385] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1857385/+attachment/5314912/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: New Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe
[Kernel-packages] [Bug 1857385] AlsaInfo.txt
apport information ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1857385/+attachment/5314907/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: New Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD]
[Kernel-packages] [Bug 1857385] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1857385/+attachment/5314909/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: New Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe
[Kernel-packages] [Bug 1857385] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1857385/+attachment/5314910/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: New Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD]
[Kernel-packages] [Bug 1857385] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1857385/+attachment/5314911/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: New Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD]
[Kernel-packages] [Bug 1857385] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1857385/+attachment/5314914/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: New Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD]
[Kernel-packages] [Bug 1857385] [NEW] xHCI host controller not responding, assume dead via USB-C docking station
Public bug reported: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] 00:01.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] 00:01.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] 00:01.7 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] 00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus A 00:14.0 SMBus: Advanced Micro
[Kernel-packages] [Bug 1857385] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1857385/+attachment/5314915/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: New Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices,
[Kernel-packages] [Bug 1857385] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1857385/+attachment/5314916/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: New Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD]
[Kernel-packages] [Bug 1857385] AudioDevicesInUse.txt
apport information ** Attachment added: "AudioDevicesInUse.txt" https://bugs.launchpad.net/bugs/1857385/+attachment/5314908/+files/AudioDevicesInUse.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1857385 Title: xHCI host controller not responding, assume dead via USB-C docking station Status in linux package in Ubuntu: New Bug description: Hello, I'm using a Lenovo T495s with the Lenovo AJ40 - Ultra Docking Station USB-C (https://support.lenovo.com/us/en/solutions/pd500173O) and, when I undock the laptop from the docking station, the USB Hub disconnects all the local laptop USB ports and they are unusable. If I try to re-attach the laptop to the docking station nothing change, the ports (docking and laptop) are still disconnected, the hdmi/lan/power is working good. Sometimes it happens also when the laptop is docked and I'm working. The issue seems similar of the bug 1766076: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076 but here no thunderbolt, it's a ryzen cpu. As written in the bug 1766076, the only way to have the USB in working condition is unbinding/binding the xhci or using the unit/systemd workaround described on post 83 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1766076/comments/83) with some modification, sometimes is still not working at all. The issue is present on Ubuntu 19.10 (see below the logs), on Ubuntu 18.04 (with kernel 4.x or 5.0 mainline by ubuntu, 5.2 and 5.4 debs installed from kernel.org) and on Fedora 31 too. In Windows everything is working fine. The bios and firmware of the docking station are updated to the last one (1 month ago). The dmesg when I undock the laptop: [ 305.299725] usb 2-1: USB disconnect, device number 2 [ 305.310888] [drm] DM_MST: stopping TM on aconnector: 8e933bad [id: 77] [ 305.311186] [drm] DM_MST: Disabling connector: 0c5e8d66 [id: 81] [master: 8e933bad] [ 305.311957] [drm] DM_MST: Disabling connector: b7fb3125 [id: 86] [master: 8e933bad] [ 305.312136] [drm] DM_MST: Disabling connector: e642e447 [id: 91] [master: 8e933bad] [ 305.362012] r8169 :03:00.0 enp3s0f0: Link is Down [ 305.464627] usb 3-4: USB disconnect, device number 2 [ 305.464642] usb 3-4.2: USB disconnect, device number 3 [ 305.472691] usb 2-4: USB disconnect, device number 4 [ 305.472704] usb 2-4.2: USB disconnect, device number 5 [ 305.472712] usb 2-4.2.4: USB disconnect, device number 7 [ 306.725746] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 306.725892] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) ...hundreds of line - the same [ 310.520323] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.520504] xhci_hcd :05:00.3: xHCI host not responding to stop endpoint command. [ 310.520622] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) hundreds of line - the same [ 310.529388] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.529626] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530634] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530740] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.530843] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531095] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.531324] usb 2-4.2.4: 2:1: usb_set_interface failed (-19) [ 310.532315] xhci_hcd :05:00.3: xHCI host controller not responding, assume dead [ 310.532379] xhci_hcd :05:00.3: HC died; cleaning up [ 310.532440] xhci_hcd :05:00.3: Timeout while waiting for configure endpoint command [ 310.670248] usb 2-4.3: USB disconnect, device number 6 [ 310.834039] usb 2-4.5: USB disconnect, device number 8 [ 310.835017] usb 2-2: USB disconnect, device number 10 When I re-attach the latop to the docking: [ 343.111212] r8169 :03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control rx/tx [ 344.272052] [drm] DM_MST: starting TM on aconnector: 8e933bad [id: 77] [ 344.365795] [drm] DM_MST: added connector: e2f1a7b4 [id: 100] [master: 8e933bad] [ 344.365857] [drm] DM_MST: added connector: c263592d [id: 105] [master: 8e933bad] [ 344.365899] [drm] DM_MST: added connector: 44df80f6 [id: 116] [master: 8e933bad] Software: Ubuntu 19.10 - Ubuntu 5.3.0-24.26-generic 5.3.10 Linux 5.3.0-24-generic #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux lspci: (laptop + docking) 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc.