[Kernel-packages] [Bug 1265151] Re: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1265151 Title: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10 Status in “linux” package in Ubuntu: Expired Bug description: After upgrading to 13.10 wifi no longer works for rt2800pci (RT3290) To me it looks like this problem: http://www.spinics.net/lists/linux-wireless/msg113047.html $ lsb_releasee -rd Description:Ubuntu 13.10 Release:13.10 $ apt-cache policy linux linux: Installeret: (ingen) Kandidat:3.11.0.14.15 Versionstabel: 3.11.0.14.15 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu/ saucy-security/main amd64 Packages 3.11.0.12.13 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy/main amd64 Packages I expected wifi to work as in 13.04, but it is unstable and in is deactivated after some time. I can reproduce the problem with $ sudo rmmod rt2800pci $ sudo modprobe rt2800pci after that WIFI works for some seconds or minutes, then it is disconnected. the dmesg output is like this but it varies a bit... [ 360.455741] rt2800pci :04:00.0: irq 56 for MSI/MSI-X [ 360.455823] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected [ 360.459348] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 3290 detected [ 360.459674] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 360.471808] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin' [ 360.471870] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37 [ 360.517677] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 360.518267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 362.601583] wlan0: authenticate with 00:18:e7:8a:55:2b [ 362.616562] wlan0: send auth to 00:18:e7:8a:55:2b (try 1/3) [ 362.617959] wlan0: authenticated [ 362.620409] wlan0: associate with 00:18:e7:8a:55:2b (try 1/3) [ 362.624016] wlan0: RX AssocResp from 00:18:e7:8a:55:2b (capab=0x431 status=0 aid=2) [ 362.624103] wlan0: associated [ 362.624156] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 446.156373] r8169 :02:00.0 eth0: link down [ 476.091171] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.251186] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.639219] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.799146] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.807303] cfg80211: Calling CRDA to update world regulatory domain [ 476.813452] cfg80211: World regulatory domain updated: [ 476.813459] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 476.813464] cfg80211: (2402000 KHz - 2472000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813468] cfg80211: (2457000 KHz - 2482000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813472] cfg80211: (2474000 KHz - 2494000 KHz @ 2 KHz), (300 mBi, 2000 mBm) [ 476.813475] cfg80211: (517 KHz - 525 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813478] cfg80211: (5735000 KHz - 5835000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 477.059262] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.219205] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 477.379126] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.539122] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 478.759324] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 478.919410] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 483.755832] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 483.915844] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 484.075688] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 484.235771] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-14-generic 3.11.0-14.21 ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: jarl 1860 F pulseaudio
[Kernel-packages] [Bug 1265151] Re: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10
Have exactly the same problem, very difficult to fix -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1265151 Title: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10 Status in “linux” package in Ubuntu: Incomplete Bug description: After upgrading to 13.10 wifi no longer works for rt2800pci (RT3290) To me it looks like this problem: http://www.spinics.net/lists/linux-wireless/msg113047.html $ lsb_releasee -rd Description:Ubuntu 13.10 Release:13.10 $ apt-cache policy linux linux: Installeret: (ingen) Kandidat:3.11.0.14.15 Versionstabel: 3.11.0.14.15 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu/ saucy-security/main amd64 Packages 3.11.0.12.13 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy/main amd64 Packages I expected wifi to work as in 13.04, but it is unstable and in is deactivated after some time. I can reproduce the problem with $ sudo rmmod rt2800pci $ sudo modprobe rt2800pci after that WIFI works for some seconds or minutes, then it is disconnected. the dmesg output is like this but it varies a bit... [ 360.455741] rt2800pci :04:00.0: irq 56 for MSI/MSI-X [ 360.455823] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected [ 360.459348] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 3290 detected [ 360.459674] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 360.471808] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin' [ 360.471870] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37 [ 360.517677] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 360.518267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 362.601583] wlan0: authenticate with 00:18:e7:8a:55:2b [ 362.616562] wlan0: send auth to 00:18:e7:8a:55:2b (try 1/3) [ 362.617959] wlan0: authenticated [ 362.620409] wlan0: associate with 00:18:e7:8a:55:2b (try 1/3) [ 362.624016] wlan0: RX AssocResp from 00:18:e7:8a:55:2b (capab=0x431 status=0 aid=2) [ 362.624103] wlan0: associated [ 362.624156] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 446.156373] r8169 :02:00.0 eth0: link down [ 476.091171] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.251186] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.639219] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.799146] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.807303] cfg80211: Calling CRDA to update world regulatory domain [ 476.813452] cfg80211: World regulatory domain updated: [ 476.813459] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 476.813464] cfg80211: (2402000 KHz - 2472000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813468] cfg80211: (2457000 KHz - 2482000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813472] cfg80211: (2474000 KHz - 2494000 KHz @ 2 KHz), (300 mBi, 2000 mBm) [ 476.813475] cfg80211: (517 KHz - 525 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813478] cfg80211: (5735000 KHz - 5835000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 477.059262] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.219205] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 477.379126] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.539122] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 478.759324] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 478.919410] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 483.755832] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 483.915844] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 484.075688] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 484.235771] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-14-generic 3.11.0-14.21 ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: jarl 1860 F pulseaudio /dev/snd/controlC0: jarl 1860 F pulseaudio Date: Tue Dec 31 09:11:38 2013
[Kernel-packages] [Bug 1265151] Re: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10
I istalled the latest kernel I have update to the latest kernel using the steps in http://ubuntuhandbook.org/index.php/2013/11/linux- kernel-3-12-released-install-ubuntu-or-linux-mint/ it seem to work well. I am using it now! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1265151 Title: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10 Status in “linux” package in Ubuntu: Incomplete Bug description: After upgrading to 13.10 wifi no longer works for rt2800pci (RT3290) To me it looks like this problem: http://www.spinics.net/lists/linux-wireless/msg113047.html $ lsb_releasee -rd Description:Ubuntu 13.10 Release:13.10 $ apt-cache policy linux linux: Installeret: (ingen) Kandidat:3.11.0.14.15 Versionstabel: 3.11.0.14.15 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu/ saucy-security/main amd64 Packages 3.11.0.12.13 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy/main amd64 Packages I expected wifi to work as in 13.04, but it is unstable and in is deactivated after some time. I can reproduce the problem with $ sudo rmmod rt2800pci $ sudo modprobe rt2800pci after that WIFI works for some seconds or minutes, then it is disconnected. the dmesg output is like this but it varies a bit... [ 360.455741] rt2800pci :04:00.0: irq 56 for MSI/MSI-X [ 360.455823] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected [ 360.459348] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 3290 detected [ 360.459674] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 360.471808] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin' [ 360.471870] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37 [ 360.517677] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 360.518267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 362.601583] wlan0: authenticate with 00:18:e7:8a:55:2b [ 362.616562] wlan0: send auth to 00:18:e7:8a:55:2b (try 1/3) [ 362.617959] wlan0: authenticated [ 362.620409] wlan0: associate with 00:18:e7:8a:55:2b (try 1/3) [ 362.624016] wlan0: RX AssocResp from 00:18:e7:8a:55:2b (capab=0x431 status=0 aid=2) [ 362.624103] wlan0: associated [ 362.624156] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 446.156373] r8169 :02:00.0 eth0: link down [ 476.091171] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.251186] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.639219] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.799146] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.807303] cfg80211: Calling CRDA to update world regulatory domain [ 476.813452] cfg80211: World regulatory domain updated: [ 476.813459] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 476.813464] cfg80211: (2402000 KHz - 2472000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813468] cfg80211: (2457000 KHz - 2482000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813472] cfg80211: (2474000 KHz - 2494000 KHz @ 2 KHz), (300 mBi, 2000 mBm) [ 476.813475] cfg80211: (517 KHz - 525 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813478] cfg80211: (5735000 KHz - 5835000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 477.059262] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.219205] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 477.379126] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.539122] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 478.759324] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 478.919410] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 483.755832] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 483.915844] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 484.075688] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 484.235771] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-14-generic 3.11.0-14.21 ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 AudioDevicesInUse: USERPID
[Kernel-packages] [Bug 1265151] Re: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10
Thanks a lot for the verify specific links, especially https://help.ubuntu.com/community/BiosUpdate, I didn't know. I will update the BIOS later today and get back. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1265151 Title: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10 Status in “linux” package in Ubuntu: Incomplete Bug description: After upgrading to 13.10 wifi no longer works for rt2800pci (RT3290) To me it looks like this problem: http://www.spinics.net/lists/linux-wireless/msg113047.html $ lsb_releasee -rd Description:Ubuntu 13.10 Release:13.10 $ apt-cache policy linux linux: Installeret: (ingen) Kandidat:3.11.0.14.15 Versionstabel: 3.11.0.14.15 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu/ saucy-security/main amd64 Packages 3.11.0.12.13 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy/main amd64 Packages I expected wifi to work as in 13.04, but it is unstable and in is deactivated after some time. I can reproduce the problem with $ sudo rmmod rt2800pci $ sudo modprobe rt2800pci after that WIFI works for some seconds or minutes, then it is disconnected. the dmesg output is like this but it varies a bit... [ 360.455741] rt2800pci :04:00.0: irq 56 for MSI/MSI-X [ 360.455823] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected [ 360.459348] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 3290 detected [ 360.459674] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 360.471808] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin' [ 360.471870] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37 [ 360.517677] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 360.518267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 362.601583] wlan0: authenticate with 00:18:e7:8a:55:2b [ 362.616562] wlan0: send auth to 00:18:e7:8a:55:2b (try 1/3) [ 362.617959] wlan0: authenticated [ 362.620409] wlan0: associate with 00:18:e7:8a:55:2b (try 1/3) [ 362.624016] wlan0: RX AssocResp from 00:18:e7:8a:55:2b (capab=0x431 status=0 aid=2) [ 362.624103] wlan0: associated [ 362.624156] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 446.156373] r8169 :02:00.0 eth0: link down [ 476.091171] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.251186] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.639219] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.799146] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.807303] cfg80211: Calling CRDA to update world regulatory domain [ 476.813452] cfg80211: World regulatory domain updated: [ 476.813459] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 476.813464] cfg80211: (2402000 KHz - 2472000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813468] cfg80211: (2457000 KHz - 2482000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813472] cfg80211: (2474000 KHz - 2494000 KHz @ 2 KHz), (300 mBi, 2000 mBm) [ 476.813475] cfg80211: (517 KHz - 525 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813478] cfg80211: (5735000 KHz - 5835000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 477.059262] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.219205] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 477.379126] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.539122] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 478.759324] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 478.919410] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 483.755832] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 483.915844] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 484.075688] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 484.235771] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-14-generic 3.11.0-14.21 ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: jarl 1860 F
[Kernel-packages] [Bug 1265151] Re: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10
I updated the BIOS, it doesn't help... After BIOS update: $ sudo dmidecode -s bios-version sudo dmidecode -s bios-release-date 68CPE Ver. F.24 10/18/2013 The problem seems to be introduced in kernel 3.11 and solved in 3.12. Are there any plans on updating ubuntu official kernel to 3.12? Jarl -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1265151 Title: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10 Status in “linux” package in Ubuntu: Incomplete Bug description: After upgrading to 13.10 wifi no longer works for rt2800pci (RT3290) To me it looks like this problem: http://www.spinics.net/lists/linux-wireless/msg113047.html $ lsb_releasee -rd Description:Ubuntu 13.10 Release:13.10 $ apt-cache policy linux linux: Installeret: (ingen) Kandidat:3.11.0.14.15 Versionstabel: 3.11.0.14.15 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu/ saucy-security/main amd64 Packages 3.11.0.12.13 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy/main amd64 Packages I expected wifi to work as in 13.04, but it is unstable and in is deactivated after some time. I can reproduce the problem with $ sudo rmmod rt2800pci $ sudo modprobe rt2800pci after that WIFI works for some seconds or minutes, then it is disconnected. the dmesg output is like this but it varies a bit... [ 360.455741] rt2800pci :04:00.0: irq 56 for MSI/MSI-X [ 360.455823] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected [ 360.459348] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 3290 detected [ 360.459674] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 360.471808] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin' [ 360.471870] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37 [ 360.517677] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 360.518267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 362.601583] wlan0: authenticate with 00:18:e7:8a:55:2b [ 362.616562] wlan0: send auth to 00:18:e7:8a:55:2b (try 1/3) [ 362.617959] wlan0: authenticated [ 362.620409] wlan0: associate with 00:18:e7:8a:55:2b (try 1/3) [ 362.624016] wlan0: RX AssocResp from 00:18:e7:8a:55:2b (capab=0x431 status=0 aid=2) [ 362.624103] wlan0: associated [ 362.624156] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 446.156373] r8169 :02:00.0 eth0: link down [ 476.091171] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.251186] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.639219] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.799146] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.807303] cfg80211: Calling CRDA to update world regulatory domain [ 476.813452] cfg80211: World regulatory domain updated: [ 476.813459] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 476.813464] cfg80211: (2402000 KHz - 2472000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813468] cfg80211: (2457000 KHz - 2482000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813472] cfg80211: (2474000 KHz - 2494000 KHz @ 2 KHz), (300 mBi, 2000 mBm) [ 476.813475] cfg80211: (517 KHz - 525 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813478] cfg80211: (5735000 KHz - 5835000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 477.059262] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.219205] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 477.379126] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.539122] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 478.759324] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 478.919410] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 483.755832] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 483.915844] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 484.075688] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 484.235771] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-14-generic 3.11.0-14.21 ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 NonfreeKernelModules: fglrx ApportVersion:
[Kernel-packages] [Bug 1265151] Re: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10
Should I change status to New now that I have provided the requested info? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1265151 Title: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10 Status in “linux” package in Ubuntu: Incomplete Bug description: After upgrading to 13.10 wifi no longer works for rt2800pci (RT3290) To me it looks like this problem: http://www.spinics.net/lists/linux-wireless/msg113047.html $ lsb_releasee -rd Description:Ubuntu 13.10 Release:13.10 $ apt-cache policy linux linux: Installeret: (ingen) Kandidat:3.11.0.14.15 Versionstabel: 3.11.0.14.15 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu/ saucy-security/main amd64 Packages 3.11.0.12.13 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy/main amd64 Packages I expected wifi to work as in 13.04, but it is unstable and in is deactivated after some time. I can reproduce the problem with $ sudo rmmod rt2800pci $ sudo modprobe rt2800pci after that WIFI works for some seconds or minutes, then it is disconnected. the dmesg output is like this but it varies a bit... [ 360.455741] rt2800pci :04:00.0: irq 56 for MSI/MSI-X [ 360.455823] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected [ 360.459348] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 3290 detected [ 360.459674] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 360.471808] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin' [ 360.471870] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37 [ 360.517677] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 360.518267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 362.601583] wlan0: authenticate with 00:18:e7:8a:55:2b [ 362.616562] wlan0: send auth to 00:18:e7:8a:55:2b (try 1/3) [ 362.617959] wlan0: authenticated [ 362.620409] wlan0: associate with 00:18:e7:8a:55:2b (try 1/3) [ 362.624016] wlan0: RX AssocResp from 00:18:e7:8a:55:2b (capab=0x431 status=0 aid=2) [ 362.624103] wlan0: associated [ 362.624156] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 446.156373] r8169 :02:00.0 eth0: link down [ 476.091171] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.251186] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.639219] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.799146] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.807303] cfg80211: Calling CRDA to update world regulatory domain [ 476.813452] cfg80211: World regulatory domain updated: [ 476.813459] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 476.813464] cfg80211: (2402000 KHz - 2472000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813468] cfg80211: (2457000 KHz - 2482000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813472] cfg80211: (2474000 KHz - 2494000 KHz @ 2 KHz), (300 mBi, 2000 mBm) [ 476.813475] cfg80211: (517 KHz - 525 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813478] cfg80211: (5735000 KHz - 5835000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 477.059262] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.219205] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 477.379126] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.539122] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 478.759324] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 478.919410] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 483.755832] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 483.915844] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 484.075688] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 484.235771] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-14-generic 3.11.0-14.21 ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: jarl 1860 F pulseaudio /dev/snd/controlC0: jarl 1860 F pulseaudio Date: Tue Dec 31
[Kernel-packages] [Bug 1265151] Re: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10
Jarl, thank you for updating your BIOS. Could you please confirm this issue exists with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com/daily-live/current/ . If the issue remains, please just make a comment to this. ** Tags added: latest-bios-f.24 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1265151 Title: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10 Status in “linux” package in Ubuntu: Incomplete Bug description: After upgrading to 13.10 wifi no longer works for rt2800pci (RT3290) To me it looks like this problem: http://www.spinics.net/lists/linux-wireless/msg113047.html $ lsb_releasee -rd Description:Ubuntu 13.10 Release:13.10 $ apt-cache policy linux linux: Installeret: (ingen) Kandidat:3.11.0.14.15 Versionstabel: 3.11.0.14.15 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu/ saucy-security/main amd64 Packages 3.11.0.12.13 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy/main amd64 Packages I expected wifi to work as in 13.04, but it is unstable and in is deactivated after some time. I can reproduce the problem with $ sudo rmmod rt2800pci $ sudo modprobe rt2800pci after that WIFI works for some seconds or minutes, then it is disconnected. the dmesg output is like this but it varies a bit... [ 360.455741] rt2800pci :04:00.0: irq 56 for MSI/MSI-X [ 360.455823] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected [ 360.459348] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 3290 detected [ 360.459674] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 360.471808] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin' [ 360.471870] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37 [ 360.517677] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 360.518267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 362.601583] wlan0: authenticate with 00:18:e7:8a:55:2b [ 362.616562] wlan0: send auth to 00:18:e7:8a:55:2b (try 1/3) [ 362.617959] wlan0: authenticated [ 362.620409] wlan0: associate with 00:18:e7:8a:55:2b (try 1/3) [ 362.624016] wlan0: RX AssocResp from 00:18:e7:8a:55:2b (capab=0x431 status=0 aid=2) [ 362.624103] wlan0: associated [ 362.624156] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 446.156373] r8169 :02:00.0 eth0: link down [ 476.091171] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.251186] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.639219] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.799146] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.807303] cfg80211: Calling CRDA to update world regulatory domain [ 476.813452] cfg80211: World regulatory domain updated: [ 476.813459] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 476.813464] cfg80211: (2402000 KHz - 2472000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813468] cfg80211: (2457000 KHz - 2482000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813472] cfg80211: (2474000 KHz - 2494000 KHz @ 2 KHz), (300 mBi, 2000 mBm) [ 476.813475] cfg80211: (517 KHz - 525 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813478] cfg80211: (5735000 KHz - 5835000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 477.059262] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.219205] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 477.379126] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.539122] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 478.759324] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 478.919410] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 483.755832] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 483.915844] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 484.075688] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 484.235771] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-14-generic 3.11.0-14.21 ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 NonfreeKernelModules: fglrx ApportVersion:
[Kernel-packages] [Bug 1265151] Re: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10
I have update to the latest kernel using the steps in http://ubuntuhandbook.org/index.php/2013/11/linux-kernel-3-12-released- install-ubuntu-or-linux-mint/ (Thanks Ivo) That solved my problem. Christopher, Are you serious? you are asking me to completely wipe my ubuntu installation and reinstall from scratch the daily CD image to see if that solves the problem. It has been confirmed now by three sources that kernel 3.12 solves the problem, isn't that sufficient information? I trust that if daily CD has kernel 3.11 the problem is there, if it has kernel 3.12 the problem is not there. Jarl -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1265151 Title: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10 Status in “linux” package in Ubuntu: Incomplete Bug description: After upgrading to 13.10 wifi no longer works for rt2800pci (RT3290) To me it looks like this problem: http://www.spinics.net/lists/linux-wireless/msg113047.html $ lsb_releasee -rd Description:Ubuntu 13.10 Release:13.10 $ apt-cache policy linux linux: Installeret: (ingen) Kandidat:3.11.0.14.15 Versionstabel: 3.11.0.14.15 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu/ saucy-security/main amd64 Packages 3.11.0.12.13 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy/main amd64 Packages I expected wifi to work as in 13.04, but it is unstable and in is deactivated after some time. I can reproduce the problem with $ sudo rmmod rt2800pci $ sudo modprobe rt2800pci after that WIFI works for some seconds or minutes, then it is disconnected. the dmesg output is like this but it varies a bit... [ 360.455741] rt2800pci :04:00.0: irq 56 for MSI/MSI-X [ 360.455823] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected [ 360.459348] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 3290 detected [ 360.459674] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 360.471808] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin' [ 360.471870] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37 [ 360.517677] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 360.518267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 362.601583] wlan0: authenticate with 00:18:e7:8a:55:2b [ 362.616562] wlan0: send auth to 00:18:e7:8a:55:2b (try 1/3) [ 362.617959] wlan0: authenticated [ 362.620409] wlan0: associate with 00:18:e7:8a:55:2b (try 1/3) [ 362.624016] wlan0: RX AssocResp from 00:18:e7:8a:55:2b (capab=0x431 status=0 aid=2) [ 362.624103] wlan0: associated [ 362.624156] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 446.156373] r8169 :02:00.0 eth0: link down [ 476.091171] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.251186] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.639219] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.799146] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.807303] cfg80211: Calling CRDA to update world regulatory domain [ 476.813452] cfg80211: World regulatory domain updated: [ 476.813459] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 476.813464] cfg80211: (2402000 KHz - 2472000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813468] cfg80211: (2457000 KHz - 2482000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813472] cfg80211: (2474000 KHz - 2494000 KHz @ 2 KHz), (300 mBi, 2000 mBm) [ 476.813475] cfg80211: (517 KHz - 525 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813478] cfg80211: (5735000 KHz - 5835000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 477.059262] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.219205] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 477.379126] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.539122] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 478.759324] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 478.919410] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 483.755832] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 483.915844] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 484.075688] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 484.235771] ieee80211 phy2:
[Kernel-packages] [Bug 1265151] Re: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10
I tend to agree with Ivo, this bug report is a duplicate of https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1245819 (though it is a slightly different computer model) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1265151 Title: 1814:3290 [HP ProBook 455 G1 Notebook PC] rt2800pci doesn't work after upgrading to 13.10 Status in “linux” package in Ubuntu: Incomplete Bug description: After upgrading to 13.10 wifi no longer works for rt2800pci (RT3290) To me it looks like this problem: http://www.spinics.net/lists/linux-wireless/msg113047.html $ lsb_releasee -rd Description:Ubuntu 13.10 Release:13.10 $ apt-cache policy linux linux: Installeret: (ingen) Kandidat:3.11.0.14.15 Versionstabel: 3.11.0.14.15 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu/ saucy-security/main amd64 Packages 3.11.0.12.13 0 500 http://dk.archive.ubuntu.com/ubuntu/ saucy/main amd64 Packages I expected wifi to work as in 13.04, but it is unstable and in is deactivated after some time. I can reproduce the problem with $ sudo rmmod rt2800pci $ sudo modprobe rt2800pci after that WIFI works for some seconds or minutes, then it is disconnected. the dmesg output is like this but it varies a bit... [ 360.455741] rt2800pci :04:00.0: irq 56 for MSI/MSI-X [ 360.455823] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected [ 360.459348] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 3290 detected [ 360.459674] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 360.471808] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin' [ 360.471870] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37 [ 360.517677] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 360.518267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 362.601583] wlan0: authenticate with 00:18:e7:8a:55:2b [ 362.616562] wlan0: send auth to 00:18:e7:8a:55:2b (try 1/3) [ 362.617959] wlan0: authenticated [ 362.620409] wlan0: associate with 00:18:e7:8a:55:2b (try 1/3) [ 362.624016] wlan0: RX AssocResp from 00:18:e7:8a:55:2b (capab=0x431 status=0 aid=2) [ 362.624103] wlan0: associated [ 362.624156] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 446.156373] r8169 :02:00.0 eth0: link down [ 476.091171] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.251186] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.639219] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 476.799146] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 476.807303] cfg80211: Calling CRDA to update world regulatory domain [ 476.813452] cfg80211: World regulatory domain updated: [ 476.813459] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 476.813464] cfg80211: (2402000 KHz - 2472000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813468] cfg80211: (2457000 KHz - 2482000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813472] cfg80211: (2474000 KHz - 2494000 KHz @ 2 KHz), (300 mBi, 2000 mBm) [ 476.813475] cfg80211: (517 KHz - 525 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 476.813478] cfg80211: (5735000 KHz - 5835000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 477.059262] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.219205] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 477.379126] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 477.539122] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 478.759324] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 478.919410] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 483.755832] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 483.915844] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 484.075688] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush [ 484.235771] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-14-generic 3.11.0-14.21 ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: jarl 1860
