apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1556471/+attachment/4597152/+files/UdevDb.txt
-- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1556471 Title: Connecting an Osprey 2 Mini (USB cellular wireless router) sometimes causes an endless reset loop or a kernel panic Status in linux package in Ubuntu: Confirmed Bug description: Steps to reproduce (happens > 50% of the time, but not every time): Turn on an Osprey 2 Mini Connect it to a USB port via a USB cable while both the device and computer are on (i.e. hotplug) Observed symptoms: - sometimes the Osprey 2 Mini goes into an endless reset loop (visible as the LEDs on the front of the device flashing rapidly), being reset approximately every 200ms; on such occasions, the Ubuntu user interface often reacts as though I'd inserted an audio CD containing corrupted data (e.g. via repeteadly adding an "Audio CD" icon to the launcher and then removing it, and putting up dialog boxes complaining about failure to read the data) - sometimes the kernel panics (often some time after the reset loop starts, perhaps up to 10 seconds); when this happens there was always or nearly always a reset loop occurring beforehand - sometimes the device resets once or not at all, then works as expected (showing up as a network interface, and allowing me to communicate to the Internet with a wired connection); I'm currently using an Osprey 2 Mini for this purpose right now I haven't been able to gain much information about the source of the kernel panics, as they lock up the entire system (forcing a hard power off). Alt-Sysrq commands don't work in this state (even though I have them enabled), and sometimes the Caps Lock light flashes repeatedly, both signs of a panic. The logs end some time before the panic occurs; presumably the panic means that the log file is never written to disk. Looking at my logs retrospectively, here's an interesting/relevant portion of /var/log/syslog: Mar 11 20:37:04 tundra kernel: [20656.424192] usb 3-1.2: new high-speed USB device number 3 using ehci-pci Mar 11 20:37:04 tundra kernel: [20656.549351] usb 3-1.2: New USB device found, idVendor=1bbb, idProduct=f000 Mar 11 20:37:04 tundra kernel: [20656.549362] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 11 20:37:04 tundra kernel: [20656.549367] usb 3-1.2: Product: MobileBroadBand Mar 11 20:37:04 tundra kernel: [20656.549371] usb 3-1.2: Manufacturer: Alcatel Mar 11 20:37:04 tundra kernel: [20656.549375] usb 3-1.2: SerialNumber: 0123456789ABCDEF Mar 11 20:37:02 tundra gnome-session[5167]: message repeated 19 times: [ log_kalarm:] Mar 11 20:37:05 tundra mtp-probe: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2" Mar 11 20:37:05 tundra mtp-probe: bus: 3, device: 3 was not an MTP device Mar 11 20:37:05 tundra systemd[1]: Created slice system-usb_modeswitch.slice. Mar 11 20:37:05 tundra systemd[1]: Starting USB_ModeSwitch_3-1.2... Mar 11 20:37:05 tundra usb_modeswitch_dispatcher[11944]: Could not read attribute: No such file or directory Mar 11 20:37:05 tundra kernel: [20657.479875] usb-storage 3-1.2:1.0: USB Mass Storage device detected Mar 11 20:37:05 tundra kernel: [20657.480088] scsi host6: usb-storage 3-1.2:1.0 Mar 11 20:37:05 tundra kernel: [20657.480291] usbcore: registered new interface driver usb-storage Mar 11 20:37:05 tundra kernel: [20657.528383] usbcore: registered new interface driver uas Mar 11 20:37:06 tundra kernel: [20658.481811] scsi 6:0:0:0: Direct-Access ONETOUCH LINK4 2.31 PQ: 0 ANSI: 2 Mar 11 20:37:06 tundra kernel: [20658.482801] scsi 6:0:0:1: CD-ROM ONETOUCH LINK4 2.31 PQ: 0 ANSI: 2 Mar 11 20:37:06 tundra kernel: [20658.483902] sd 6:0:0:0: Attached scsi generic sg2 type 0 Mar 11 20:37:06 tundra kernel: [20658.495442] sr 6:0:0:1: [sr1] scsi-1 drive Mar 11 20:37:06 tundra kernel: [20658.496665] sr 6:0:0:1: Attached scsi CD-ROM sr1 Mar 11 20:37:06 tundra kernel: [20658.496740] sd 6:0:0:0: [sdb] Attached SCSI removable disk Mar 11 20:37:06 tundra kernel: [20658.496914] sr 6:0:0:1: Attached scsi generic sg3 type 5 Mar 11 20:37:06 tundra kernel: [20658.587460] usb 3-1.2: reset high-speed USB device number 3 using ehci-pci Mar 11 20:37:07 tundra kernel: [20658.795437] usb 3-1.2: reset high-speed USB device number 3 using ehci-pci Mar 11 20:37:07 tundra kernel: [20658.999352] usb 3-1.2: reset high-speed USB device number 3 using ehci-pci Mar 11 20:37:07 tundra kernel: [20659.207280] usb 3-1.2: reset high-speed USB device number 3 using ehci-pci Mar 11 20:37:05 tundra usb_modeswitch_dispatcher[11944]: message repeated 2 times: [ Could not read attribute: No such file or directory] Mar 11 20:37:07 tundra usb_modeswitch_dispatcher[11944]: Error: could not get description string "serial number" Mar 11 20:37:07 tundra usb_modeswitch: switch device 1bbb:f000 on 003/003 Mar 11 20:37:07 tundra kernel: [20659.328319] scsi 6:0:0:0: rejecting I/O to offline device Mar 11 20:37:07 tundra kernel: [20659.328412] scsi 6:0:0:0: killing request Mar 11 20:37:13 tundra systemd-udevd[11969]: inotify_add_watch(9, /dev/sdb, 10) failed: No such file or directory Mar 11 20:37:13 tundra kernel: [20665.683553] usb 3-1.2: USB disconnect, device number 3 Mar 11 20:37:14 tundra kernel: [20665.881104] usb 3-1.2: new high-speed USB device number 4 using ehci-pci Mar 11 20:37:14 tundra kernel: [20665.995273] usb 3-1.2: New USB device found, idVendor=1bbb, idProduct=0195 Mar 11 20:37:14 tundra kernel: [20665.995280] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 11 20:37:14 tundra kernel: [20665.995284] usb 3-1.2: Product: MobileBroadBand Mar 11 20:37:14 tundra kernel: [20665.995286] usb 3-1.2: Manufacturer: Alcatel Mar 11 20:37:14 tundra kernel: [20665.995289] usb 3-1.2: SerialNumber: 0123456789ABCDEF Mar 11 20:37:14 tundra kernel: [20666.017853] usb-storage 3-1.2:1.2: USB Mass Storage device detected Mar 11 20:37:14 tundra kernel: [20666.018314] scsi host7: usb-storage 3-1.2:1.2 Mar 11 20:37:13 tundra systemd-udevd[11969]: message repeated 3 times: [ inotify_add_watch(9, /dev/sdb, 10) failed: No such file or directory] Mar 11 20:37:14 tundra mtp-probe: checking bus 3, device 4: "/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2" Mar 11 20:37:14 tundra mtp-probe: bus: 3, device: 4 was not an MTP device Mar 11 20:37:14 tundra kernel: [20666.244421] usbcore: registered new interface driver cdc_ether Mar 11 20:37:14 tundra NetworkManager[2492]: <warn> (usb0): failed to find device 4 'usb0' with udev Mar 11 20:37:14 tundra kernel: [20666.303099] rndis_host 3-1.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1a.0-1.2, RNDIS device, 46:c4:64:00:d0:da Mar 11 20:37:14 tundra kernel: [20666.303379] usbcore: registered new interface driver rndis_host Mar 11 20:37:14 tundra usb_modeswitch[11944]: usb_modeswitch: switched to 1bbb:0195 on 3/4 Mar 11 20:37:14 tundra laptop-mode: Laptop mode Mar 11 20:37:14 tundra laptop-mode: enabled, not active Mar 11 20:37:14 tundra kernel: [20666.597851] rndis_host 3-1.2:1.0 enx46c46400d0da: renamed from usb0 Mar 11 20:37:15 tundra laptop-mode: Laptop mode Mar 11 20:37:15 tundra laptop-mode: enabled, not active Mar 11 20:37:15 tundra kernel: [20667.018355] scsi 7:0:0:0: Direct-Access ONETOUCH LINK4 2.31 PQ: 0 ANSI: 2 Mar 11 20:37:15 tundra kernel: [20667.019463] sd 7:0:0:0: Attached scsi generic sg2 type 0 Mar 11 20:37:15 tundra kernel: [20667.025108] sd 7:0:0:0: [sdb] Attached SCSI removable disk Mar 11 20:37:15 tundra usb_modeswitch_dispatcher[11944]: Unable to open bind list file: No such file or directory Mar 11 20:37:15 tundra NetworkManager[2492]: <info> (usb0): new Ethernet device (carrier: OFF, driver: 'rndis_host', ifindex: 4) Mar 11 20:37:15 tundra kernel: [20667.647210] usbcore: registered new interface driver usbserial Mar 11 20:37:15 tundra kernel: [20667.647263] usbcore: registered new interface driver usbserial_generic Mar 11 20:37:15 tundra kernel: [20667.647293] usbserial: USB Serial support registered for generic Mar 11 20:37:16 tundra kernel: [20667.830369] usbcore: registered new interface driver option Mar 11 20:37:16 tundra kernel: [20667.830470] usbserial: USB Serial support registered for GSM modem (1-port) Mar 11 20:37:16 tundra usb_modeswitch[11944]: usb_modeswitch: add device ID 1bbb:0195 to driver option Mar 11 20:37:16 tundra usb_modeswitch[11944]: usb_modeswitch: please report the device ID to the Linux USB developers! Mar 11 20:37:16 tundra NetworkManager[2492]: <info> devices added (path: /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/net/enx46c46400d0da, iface: enx46c46400d0da) Mar 11 20:37:16 tundra NetworkManager[2492]: <info> device added (path: /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/net/enx46c46400d0da, iface: enx46c46400d0da): no ifupdown configuration found. Mar 11 20:37:16 tundra kernel: [20667.906599] IPv6: ADDRCONF(NETDEV_UP): enx46c46400d0da: link is not ready The reset loops also occurred when I was using Ubuntu vivid. The kernel panics (which identify Linux as the broken package, as no user action should cause it to panic) only happened after an upgrade to wily. I couldn't get ubuntu-bug to work (after gathering information, nothing visibly happens and it has no windows on screen), and thus filed this bug report manually. Output of lsusb -v is attached. Here's the output of the other relevant commands. $ cat /proc/version_signature Ubuntu 4.2.0-32.37-generic 4.2.8-ckt4 $ lsb_release -rd Description: Ubuntu 15.10 Release: 15.10 $ apt-cache policy linux-signed-image-4.2.0-32-generic linux-signed-image-4.2.0-32-generic: Installed: 4.2.0-32.37 Candidate: 4.2.0-32.37 Version table: *** 4.2.0-32.37 0 100 /var/lib/dpkg/status $ sudo lspci -vnvn 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) Subsystem: Hewlett-Packard Company Device [103c:2186] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: ivb_uncore 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) DeviceName: Intel(R) Graphics 4000 Subsystem: Hewlett-Packard Company Device [103c:2186] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 27 Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 5000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0f00c Data: 4152 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: i915 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device [103c:2186] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 24 Region 0: Memory at c2600000 (64-bit, non-prefetchable) [size=64K] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+ Address: 00000000fee0c00c Data: 41c1 Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:2186] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 28 Region 0: Memory at c2614000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0f00c Data: 4162 Kernel driver in use: mei_me 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:2186] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at c2619000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+ Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:2186] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 Region 0: Memory at c2610000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0f00c Data: 4182 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: c2500000-c25fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:2186] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 16 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: c2400000-c24fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #1, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:2186] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Bus: primary=00, secondary=03, subordinate=08, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c1000000-c1ffffff Prefetchable memory behind bridge: 00000000c0000000-00000000c0ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #2, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:2186] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:2186] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at c2618000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:2186] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:2186] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 26 Region 0: I/O ports at 5088 [size=8] Region 1: I/O ports at 5094 [size=4] Region 2: I/O ports at 5080 [size=8] Region 3: I/O ports at 5090 [size=4] Region 4: I/O ports at 5060 [size=32] Region 5: Memory at c2617000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4142 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Capabilities: [b0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:2186] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 0 Region 0: Memory at c2615000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 5040 [size=32] 01:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188EE Wireless Network Adapter [10ec:8179] (rev 01) DeviceName: Realtek 802.11 b/g/n w/ *2 antennas Subsystem: Hewlett-Packard Company Device [103c:197d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 30 Region 0: I/O ports at 4000 [size=256] Region 2: Memory at c2500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0800c Data: 4192 Capabilities: [70] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+, OBFF Via message/WAKE# DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Device Serial Number 00-e0-4c-ff-fe-81-91-01 Capabilities: [150 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Kernel driver in use: rtl8188ee 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07) DeviceName: Realtek PCIe FE Family Controller Subsystem: Hewlett-Packard Company Device [103c:2186] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 25 Region 0: I/O ports at 3000 [size=256] Region 2: Memory at c2404000 (64-bit, prefetchable) [size=4K] Region 4: Memory at c2400000 (64-bit, prefetchable) [size=16K] Expansion ROM at c2410000 [disabled] [size=64K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0f00c Data: 41e1 Capabilities: [70] Express (v2) Endpoint, MSI 01 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Via message/WAKE# DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [d0] Vital Product Data No end tag found Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [170 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Kernel driver in use: r8169 --- ApportVersion: 2.19.1-0ubuntu5 Architecture: amd64 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: ais523 6233 F.... pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 15.10 HibernationDevice: RESUME=UUID=bfbc4bf8-2e40-4799-bbef-9c5044c87007 InstallationDate: Installed on 2014-06-03 (648 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) MachineType: Hewlett-Packard HP Pavilion 15 Notebook PC Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-32-generic.efi.signed root=UUID=e92d655d-cf36-4d45-90e7-30a0f9d0949e ro quiet splash ProcVersionSignature: Ubuntu 4.2.0-32.37-generic 4.2.8-ckt4 RelatedPackageVersions: linux-restricted-modules-4.2.0-32-generic N/A linux-backports-modules-4.2.0-32-generic N/A linux-firmware 1.149.3 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: wily Uname: Linux 4.2.0-32-generic x86_64 UpgradeStatus: Upgraded to wily on 2016-02-18 (22 days ago) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo wireshark _MarkForUpload: True dmi.bios.date: 12/04/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.42 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 2186 dmi.board.vendor: Hewlett-Packard dmi.board.version: 35.12 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.42:bd12/04/2013:svnHewlett-Packard:pnHPPavilion15NotebookPC:pvr098B110000404100000620180:rvnHewlett-Packard:rn2186:rvr35.12:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion 15 Notebook PC dmi.product.version: 098B110000404100000620180 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1556471/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
