[Kernel-packages] [Bug 1665589] Re: Killer 1535 802.11 2×2 Wi-Fi + BT 4.1 controller can't discover MS Mobile Mouse 3600
[Expired for bluez (Ubuntu) because there has been no activity for 60 days.] ** Changed in: bluez (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1665589 Title: Killer 1535 802.11 2×2 Wi-Fi + BT 4.1 controller can't discover MS Mobile Mouse 3600 Status in bluez package in Ubuntu: Expired Bug description: I saw number of posts here about Mobile Mouse 3600 but sadly none of them helped me to debug the issue. I have Killer 1535 card on my Dell XPS 13. According to specs it's Bluetooth 4.1 device. Mobile Mouse 3600 is Bluetooth Low Energy device of version 4.0. In theory these two devices should be able to communicate. Unfortunately they don't :( I'm on Ubuntu MATE 16.10 but I also tested it on Linux Mint 18 and Element OS. I have bluez 5.41 installed. Here is what info I have abut my devices usb-devices | awk '/e301/' RS= T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e301 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb hciconfig -a | grep HCI HCI Version: 4.1 (0x7) Revision: 0x0 lsusb | grep Ath Bus 001 Device 004: ID 0cf3:e301 Atheros Communications, Inc. `sudo hcitool lescan` finds nothing. After clean installation `dmesg | grep ath10` gives [ 14.979939] ath10k_pci :3a:00.0: enabling device ( -> 0002) [ 14.981966] ath10k_pci :3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 15.263691] ath10k_pci :3a:00.0: Direct firmware load for ath10k/pre-cal-pci-:3a:00.0.bin failed with error -2 [ 15.263709] ath10k_pci :3a:00.0: Direct firmware load for ath10k/cal-pci-:3a:00.0.bin failed with error -2 [ 15.263734] ath10k_pci :3a:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2 [ 15.263736] ath10k_pci :3a:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2 [ 15.440154] ath10k_pci :3a:00.0: qca6174 hw3.2 target 0x0503 chip_id 0x00340aff sub 1a56:1535 [ 15.440156] ath10k_pci :3a:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 15.440582] ath10k_pci :3a:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5 [ 15.532098] ath10k_pci :3a:00.0: board_file api 2 bmi_id N/A crc32 6fc88fe7 [ 17.658135] ath10k_pci :3a:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 17.770412] ath10k_pci :3a:00.0 wlp58s0: renamed from wlan0 My WiFi works. I can also pair Bluetooth keyboard. Since I don't really know how device drivers work in Linux I noticed line with error about `firmware-5.bin` in output of dmesg. So I took missing file from https://github.com/kvalo/ath10k- firmware/tree/master/QCA6174/hw3.0/4.4. It turned out to be bad idea because it botched wifi/bluetooth completely. Here is what I had in log [3.519354] ath10k_pci :3a:00.0: enabling device ( -> 0002) [3.521259] ath10k_pci :3a:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [3.765880] ath10k_pci :3a:00.0: Direct firmware load for ath10k/cal-pci-:3a:00.0.bin failed with error -2 [3.831220] ath10k_pci :3a:00.0: failed to fetch board data for ath10k/QCA6174/hw3.0 from bus=pci,bmi-chip-id=0,bmi-board-id=0/board-2.bin [5.887772] ath10k_pci :3a:00.0: Unknown eventid: 90118 [5.887786] ath10k_pci :3a:00.0: qca6174 hw3.2 (0x0503, 0x00340aff bmi 0:0) fw WLAN.RM.4.4-00022-QCARMSWPZ-2 fwapi 5 bdapi 1 htt-ver 3.32 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 features wowlan,ignore-otp [5.887789] ath10k_pci :3a:00.0: debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [8.884160] ath10k_pci :3a:00.0: could not suspend target (-11) [8.966789] ath10k_pci :3a:00.0 wlp58s0: renamed from wlan0 [ 11.178547] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 14.176459] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11 [ 20.176417] ath10k_pci :3a:00.0: could not suspend target (-11) [ 22.435758] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 25.432569] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11 [ 31.432925] ath10k_pci :3a:00.0: could not suspend target (-11) [ 33.687090] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 36.684683] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11 [ 42.685119]
[Kernel-packages] [Bug 1665589] Re: Killer 1535 802.11 2×2 Wi-Fi + BT 4.1 controller can't discover MS Mobile Mouse 3600
Marking as Invalid because the release is EOL is not correct. Marking as Incomplete. Also, 18.04 is (at the time of writing) still in development, and you should expect some breakage. https://wiki.ubuntu.com/Bugs/Responses#Release_has_reached_End_of_Life_.28EOL.29 Reporter, is this still present on 17.10 or 16.04? ** Changed in: bluez (Ubuntu) Status: Invalid => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1665589 Title: Killer 1535 802.11 2×2 Wi-Fi + BT 4.1 controller can't discover MS Mobile Mouse 3600 Status in bluez package in Ubuntu: Incomplete Bug description: I saw number of posts here about Mobile Mouse 3600 but sadly none of them helped me to debug the issue. I have Killer 1535 card on my Dell XPS 13. According to specs it's Bluetooth 4.1 device. Mobile Mouse 3600 is Bluetooth Low Energy device of version 4.0. In theory these two devices should be able to communicate. Unfortunately they don't :( I'm on Ubuntu MATE 16.10 but I also tested it on Linux Mint 18 and Element OS. I have bluez 5.41 installed. Here is what info I have abut my devices usb-devices | awk '/e301/' RS= T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e301 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb hciconfig -a | grep HCI HCI Version: 4.1 (0x7) Revision: 0x0 lsusb | grep Ath Bus 001 Device 004: ID 0cf3:e301 Atheros Communications, Inc. `sudo hcitool lescan` finds nothing. After clean installation `dmesg | grep ath10` gives [ 14.979939] ath10k_pci :3a:00.0: enabling device ( -> 0002) [ 14.981966] ath10k_pci :3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 15.263691] ath10k_pci :3a:00.0: Direct firmware load for ath10k/pre-cal-pci-:3a:00.0.bin failed with error -2 [ 15.263709] ath10k_pci :3a:00.0: Direct firmware load for ath10k/cal-pci-:3a:00.0.bin failed with error -2 [ 15.263734] ath10k_pci :3a:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2 [ 15.263736] ath10k_pci :3a:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2 [ 15.440154] ath10k_pci :3a:00.0: qca6174 hw3.2 target 0x0503 chip_id 0x00340aff sub 1a56:1535 [ 15.440156] ath10k_pci :3a:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 15.440582] ath10k_pci :3a:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5 [ 15.532098] ath10k_pci :3a:00.0: board_file api 2 bmi_id N/A crc32 6fc88fe7 [ 17.658135] ath10k_pci :3a:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 17.770412] ath10k_pci :3a:00.0 wlp58s0: renamed from wlan0 My WiFi works. I can also pair Bluetooth keyboard. Since I don't really know how device drivers work in Linux I noticed line with error about `firmware-5.bin` in output of dmesg. So I took missing file from https://github.com/kvalo/ath10k- firmware/tree/master/QCA6174/hw3.0/4.4. It turned out to be bad idea because it botched wifi/bluetooth completely. Here is what I had in log [3.519354] ath10k_pci :3a:00.0: enabling device ( -> 0002) [3.521259] ath10k_pci :3a:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [3.765880] ath10k_pci :3a:00.0: Direct firmware load for ath10k/cal-pci-:3a:00.0.bin failed with error -2 [3.831220] ath10k_pci :3a:00.0: failed to fetch board data for ath10k/QCA6174/hw3.0 from bus=pci,bmi-chip-id=0,bmi-board-id=0/board-2.bin [5.887772] ath10k_pci :3a:00.0: Unknown eventid: 90118 [5.887786] ath10k_pci :3a:00.0: qca6174 hw3.2 (0x0503, 0x00340aff bmi 0:0) fw WLAN.RM.4.4-00022-QCARMSWPZ-2 fwapi 5 bdapi 1 htt-ver 3.32 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 features wowlan,ignore-otp [5.887789] ath10k_pci :3a:00.0: debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [8.884160] ath10k_pci :3a:00.0: could not suspend target (-11) [8.966789] ath10k_pci :3a:00.0 wlp58s0: renamed from wlan0 [ 11.178547] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 14.176459] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11 [ 20.176417] ath10k_pci :3a:00.0: could not suspend target (-11) [ 22.435758] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 25.432569] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11
[Kernel-packages] [Bug 1665589] Re: Killer 1535 802.11 2×2 Wi-Fi + BT 4.1 controller can't discover MS Mobile Mouse 3600
This is an unsupported release now. Please think to install the next LTS 'Bionic 18.04' http://cdimage.ubuntu.com/ubuntu-next/daily-live/current/ https://www.omgubuntu.co.uk/2018/02/ubuntu-18-04-minimal-install-option ** Changed in: bluez (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1665589 Title: Killer 1535 802.11 2×2 Wi-Fi + BT 4.1 controller can't discover MS Mobile Mouse 3600 Status in bluez package in Ubuntu: Invalid Bug description: I saw number of posts here about Mobile Mouse 3600 but sadly none of them helped me to debug the issue. I have Killer 1535 card on my Dell XPS 13. According to specs it's Bluetooth 4.1 device. Mobile Mouse 3600 is Bluetooth Low Energy device of version 4.0. In theory these two devices should be able to communicate. Unfortunately they don't :( I'm on Ubuntu MATE 16.10 but I also tested it on Linux Mint 18 and Element OS. I have bluez 5.41 installed. Here is what info I have abut my devices usb-devices | awk '/e301/' RS= T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e301 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb hciconfig -a | grep HCI HCI Version: 4.1 (0x7) Revision: 0x0 lsusb | grep Ath Bus 001 Device 004: ID 0cf3:e301 Atheros Communications, Inc. `sudo hcitool lescan` finds nothing. After clean installation `dmesg | grep ath10` gives [ 14.979939] ath10k_pci :3a:00.0: enabling device ( -> 0002) [ 14.981966] ath10k_pci :3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 15.263691] ath10k_pci :3a:00.0: Direct firmware load for ath10k/pre-cal-pci-:3a:00.0.bin failed with error -2 [ 15.263709] ath10k_pci :3a:00.0: Direct firmware load for ath10k/cal-pci-:3a:00.0.bin failed with error -2 [ 15.263734] ath10k_pci :3a:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2 [ 15.263736] ath10k_pci :3a:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2 [ 15.440154] ath10k_pci :3a:00.0: qca6174 hw3.2 target 0x0503 chip_id 0x00340aff sub 1a56:1535 [ 15.440156] ath10k_pci :3a:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 15.440582] ath10k_pci :3a:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5 [ 15.532098] ath10k_pci :3a:00.0: board_file api 2 bmi_id N/A crc32 6fc88fe7 [ 17.658135] ath10k_pci :3a:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 17.770412] ath10k_pci :3a:00.0 wlp58s0: renamed from wlan0 My WiFi works. I can also pair Bluetooth keyboard. Since I don't really know how device drivers work in Linux I noticed line with error about `firmware-5.bin` in output of dmesg. So I took missing file from https://github.com/kvalo/ath10k- firmware/tree/master/QCA6174/hw3.0/4.4. It turned out to be bad idea because it botched wifi/bluetooth completely. Here is what I had in log [3.519354] ath10k_pci :3a:00.0: enabling device ( -> 0002) [3.521259] ath10k_pci :3a:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [3.765880] ath10k_pci :3a:00.0: Direct firmware load for ath10k/cal-pci-:3a:00.0.bin failed with error -2 [3.831220] ath10k_pci :3a:00.0: failed to fetch board data for ath10k/QCA6174/hw3.0 from bus=pci,bmi-chip-id=0,bmi-board-id=0/board-2.bin [5.887772] ath10k_pci :3a:00.0: Unknown eventid: 90118 [5.887786] ath10k_pci :3a:00.0: qca6174 hw3.2 (0x0503, 0x00340aff bmi 0:0) fw WLAN.RM.4.4-00022-QCARMSWPZ-2 fwapi 5 bdapi 1 htt-ver 3.32 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 features wowlan,ignore-otp [5.887789] ath10k_pci :3a:00.0: debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [8.884160] ath10k_pci :3a:00.0: could not suspend target (-11) [8.966789] ath10k_pci :3a:00.0 wlp58s0: renamed from wlan0 [ 11.178547] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 14.176459] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11 [ 20.176417] ath10k_pci :3a:00.0: could not suspend target (-11) [ 22.435758] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 25.432569] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11 [ 31.432925] ath10k_pci :3a:00.0: could not suspend target (-11) [ 33.687090]
[Kernel-packages] [Bug 1665589] Re: Killer 1535 802.11 2×2 Wi-Fi + BT 4.1 controller can't discover MS Mobile Mouse 3600
Thank you for reporting this bug to Ubuntu. Ubuntu 16.10 (yakkety) reached end-of-life on July 20, 2017. Ubuntu 17.04 (zesty) reached end-of-life on January 13, 2018. See this document for currently supported Ubuntu releases: https://wiki.ubuntu.com/Releases We appreciate that this bug may be old and you might not be interested in discussing it any more. But if you are then please upgrade to the latest Ubuntu version and re-test. If you then find the bug is still present in the newer Ubuntu version, please add a comment here telling us which new version it is in and change the bug status to Confirmed. ** Changed in: bluez (Ubuntu) Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1665589 Title: Killer 1535 802.11 2×2 Wi-Fi + BT 4.1 controller can't discover MS Mobile Mouse 3600 Status in bluez package in Ubuntu: Incomplete Bug description: I saw number of posts here about Mobile Mouse 3600 but sadly none of them helped me to debug the issue. I have Killer 1535 card on my Dell XPS 13. According to specs it's Bluetooth 4.1 device. Mobile Mouse 3600 is Bluetooth Low Energy device of version 4.0. In theory these two devices should be able to communicate. Unfortunately they don't :( I'm on Ubuntu MATE 16.10 but I also tested it on Linux Mint 18 and Element OS. I have bluez 5.41 installed. Here is what info I have abut my devices usb-devices | awk '/e301/' RS= T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e301 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb hciconfig -a | grep HCI HCI Version: 4.1 (0x7) Revision: 0x0 lsusb | grep Ath Bus 001 Device 004: ID 0cf3:e301 Atheros Communications, Inc. `sudo hcitool lescan` finds nothing. After clean installation `dmesg | grep ath10` gives [ 14.979939] ath10k_pci :3a:00.0: enabling device ( -> 0002) [ 14.981966] ath10k_pci :3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 15.263691] ath10k_pci :3a:00.0: Direct firmware load for ath10k/pre-cal-pci-:3a:00.0.bin failed with error -2 [ 15.263709] ath10k_pci :3a:00.0: Direct firmware load for ath10k/cal-pci-:3a:00.0.bin failed with error -2 [ 15.263734] ath10k_pci :3a:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2 [ 15.263736] ath10k_pci :3a:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2 [ 15.440154] ath10k_pci :3a:00.0: qca6174 hw3.2 target 0x0503 chip_id 0x00340aff sub 1a56:1535 [ 15.440156] ath10k_pci :3a:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 15.440582] ath10k_pci :3a:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5 [ 15.532098] ath10k_pci :3a:00.0: board_file api 2 bmi_id N/A crc32 6fc88fe7 [ 17.658135] ath10k_pci :3a:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 17.770412] ath10k_pci :3a:00.0 wlp58s0: renamed from wlan0 My WiFi works. I can also pair Bluetooth keyboard. Since I don't really know how device drivers work in Linux I noticed line with error about `firmware-5.bin` in output of dmesg. So I took missing file from https://github.com/kvalo/ath10k- firmware/tree/master/QCA6174/hw3.0/4.4. It turned out to be bad idea because it botched wifi/bluetooth completely. Here is what I had in log [3.519354] ath10k_pci :3a:00.0: enabling device ( -> 0002) [3.521259] ath10k_pci :3a:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [3.765880] ath10k_pci :3a:00.0: Direct firmware load for ath10k/cal-pci-:3a:00.0.bin failed with error -2 [3.831220] ath10k_pci :3a:00.0: failed to fetch board data for ath10k/QCA6174/hw3.0 from bus=pci,bmi-chip-id=0,bmi-board-id=0/board-2.bin [5.887772] ath10k_pci :3a:00.0: Unknown eventid: 90118 [5.887786] ath10k_pci :3a:00.0: qca6174 hw3.2 (0x0503, 0x00340aff bmi 0:0) fw WLAN.RM.4.4-00022-QCARMSWPZ-2 fwapi 5 bdapi 1 htt-ver 3.32 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 features wowlan,ignore-otp [5.887789] ath10k_pci :3a:00.0: debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [8.884160] ath10k_pci :3a:00.0: could not suspend target (-11) [8.966789] ath10k_pci :3a:00.0 wlp58s0: renamed from wlan0 [ 11.178547] ath10k_pci :3a:00.0: Unknown eventid: 90118 [
[Kernel-packages] [Bug 1665589] Re: Killer 1535 802.11 2×2 Wi-Fi + BT 4.1 controller can't discover MS Mobile Mouse 3600
** Tags added: zesty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1665589 Title: Killer 1535 802.11 2×2 Wi-Fi + BT 4.1 controller can't discover MS Mobile Mouse 3600 Status in bluez package in Ubuntu: Confirmed Bug description: I saw number of posts here about Mobile Mouse 3600 but sadly none of them helped me to debug the issue. I have Killer 1535 card on my Dell XPS 13. According to specs it's Bluetooth 4.1 device. Mobile Mouse 3600 is Bluetooth Low Energy device of version 4.0. In theory these two devices should be able to communicate. Unfortunately they don't :( I'm on Ubuntu MATE 16.10 but I also tested it on Linux Mint 18 and Element OS. I have bluez 5.41 installed. Here is what info I have abut my devices usb-devices | awk '/e301/' RS= T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e301 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb hciconfig -a | grep HCI HCI Version: 4.1 (0x7) Revision: 0x0 lsusb | grep Ath Bus 001 Device 004: ID 0cf3:e301 Atheros Communications, Inc. `sudo hcitool lescan` finds nothing. After clean installation `dmesg | grep ath10` gives [ 14.979939] ath10k_pci :3a:00.0: enabling device ( -> 0002) [ 14.981966] ath10k_pci :3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 15.263691] ath10k_pci :3a:00.0: Direct firmware load for ath10k/pre-cal-pci-:3a:00.0.bin failed with error -2 [ 15.263709] ath10k_pci :3a:00.0: Direct firmware load for ath10k/cal-pci-:3a:00.0.bin failed with error -2 [ 15.263734] ath10k_pci :3a:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2 [ 15.263736] ath10k_pci :3a:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2 [ 15.440154] ath10k_pci :3a:00.0: qca6174 hw3.2 target 0x0503 chip_id 0x00340aff sub 1a56:1535 [ 15.440156] ath10k_pci :3a:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 15.440582] ath10k_pci :3a:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5 [ 15.532098] ath10k_pci :3a:00.0: board_file api 2 bmi_id N/A crc32 6fc88fe7 [ 17.658135] ath10k_pci :3a:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 17.770412] ath10k_pci :3a:00.0 wlp58s0: renamed from wlan0 My WiFi works. I can also pair Bluetooth keyboard. Since I don't really know how device drivers work in Linux I noticed line with error about `firmware-5.bin` in output of dmesg. So I took missing file from https://github.com/kvalo/ath10k- firmware/tree/master/QCA6174/hw3.0/4.4. It turned out to be bad idea because it botched wifi/bluetooth completely. Here is what I had in log [3.519354] ath10k_pci :3a:00.0: enabling device ( -> 0002) [3.521259] ath10k_pci :3a:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [3.765880] ath10k_pci :3a:00.0: Direct firmware load for ath10k/cal-pci-:3a:00.0.bin failed with error -2 [3.831220] ath10k_pci :3a:00.0: failed to fetch board data for ath10k/QCA6174/hw3.0 from bus=pci,bmi-chip-id=0,bmi-board-id=0/board-2.bin [5.887772] ath10k_pci :3a:00.0: Unknown eventid: 90118 [5.887786] ath10k_pci :3a:00.0: qca6174 hw3.2 (0x0503, 0x00340aff bmi 0:0) fw WLAN.RM.4.4-00022-QCARMSWPZ-2 fwapi 5 bdapi 1 htt-ver 3.32 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 features wowlan,ignore-otp [5.887789] ath10k_pci :3a:00.0: debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [8.884160] ath10k_pci :3a:00.0: could not suspend target (-11) [8.966789] ath10k_pci :3a:00.0 wlp58s0: renamed from wlan0 [ 11.178547] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 14.176459] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11 [ 20.176417] ath10k_pci :3a:00.0: could not suspend target (-11) [ 22.435758] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 25.432569] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11 [ 31.432925] ath10k_pci :3a:00.0: could not suspend target (-11) [ 33.687090] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 36.684683] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11 [ 42.685119] ath10k_pci :3a:00.0: could not suspend target (-11) [ 55.191367] ath10k_pci :3a:00.0: Unknown eventid:
[Kernel-packages] [Bug 1665589] Re: Killer 1535 802.11 2×2 Wi-Fi + BT 4.1 controller can't discover MS Mobile Mouse 3600
I can confirm that the issue can be reproduced on fresh installed ubuntu 17.04. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1665589 Title: Killer 1535 802.11 2×2 Wi-Fi + BT 4.1 controller can't discover MS Mobile Mouse 3600 Status in bluez package in Ubuntu: Confirmed Bug description: I saw number of posts here about Mobile Mouse 3600 but sadly none of them helped me to debug the issue. I have Killer 1535 card on my Dell XPS 13. According to specs it's Bluetooth 4.1 device. Mobile Mouse 3600 is Bluetooth Low Energy device of version 4.0. In theory these two devices should be able to communicate. Unfortunately they don't :( I'm on Ubuntu MATE 16.10 but I also tested it on Linux Mint 18 and Element OS. I have bluez 5.41 installed. Here is what info I have abut my devices usb-devices | awk '/e301/' RS= T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e301 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb hciconfig -a | grep HCI HCI Version: 4.1 (0x7) Revision: 0x0 lsusb | grep Ath Bus 001 Device 004: ID 0cf3:e301 Atheros Communications, Inc. `sudo hcitool lescan` finds nothing. After clean installation `dmesg | grep ath10` gives [ 14.979939] ath10k_pci :3a:00.0: enabling device ( -> 0002) [ 14.981966] ath10k_pci :3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 15.263691] ath10k_pci :3a:00.0: Direct firmware load for ath10k/pre-cal-pci-:3a:00.0.bin failed with error -2 [ 15.263709] ath10k_pci :3a:00.0: Direct firmware load for ath10k/cal-pci-:3a:00.0.bin failed with error -2 [ 15.263734] ath10k_pci :3a:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2 [ 15.263736] ath10k_pci :3a:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2 [ 15.440154] ath10k_pci :3a:00.0: qca6174 hw3.2 target 0x0503 chip_id 0x00340aff sub 1a56:1535 [ 15.440156] ath10k_pci :3a:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 15.440582] ath10k_pci :3a:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5 [ 15.532098] ath10k_pci :3a:00.0: board_file api 2 bmi_id N/A crc32 6fc88fe7 [ 17.658135] ath10k_pci :3a:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 17.770412] ath10k_pci :3a:00.0 wlp58s0: renamed from wlan0 My WiFi works. I can also pair Bluetooth keyboard. Since I don't really know how device drivers work in Linux I noticed line with error about `firmware-5.bin` in output of dmesg. So I took missing file from https://github.com/kvalo/ath10k- firmware/tree/master/QCA6174/hw3.0/4.4. It turned out to be bad idea because it botched wifi/bluetooth completely. Here is what I had in log [3.519354] ath10k_pci :3a:00.0: enabling device ( -> 0002) [3.521259] ath10k_pci :3a:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [3.765880] ath10k_pci :3a:00.0: Direct firmware load for ath10k/cal-pci-:3a:00.0.bin failed with error -2 [3.831220] ath10k_pci :3a:00.0: failed to fetch board data for ath10k/QCA6174/hw3.0 from bus=pci,bmi-chip-id=0,bmi-board-id=0/board-2.bin [5.887772] ath10k_pci :3a:00.0: Unknown eventid: 90118 [5.887786] ath10k_pci :3a:00.0: qca6174 hw3.2 (0x0503, 0x00340aff bmi 0:0) fw WLAN.RM.4.4-00022-QCARMSWPZ-2 fwapi 5 bdapi 1 htt-ver 3.32 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 features wowlan,ignore-otp [5.887789] ath10k_pci :3a:00.0: debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [8.884160] ath10k_pci :3a:00.0: could not suspend target (-11) [8.966789] ath10k_pci :3a:00.0 wlp58s0: renamed from wlan0 [ 11.178547] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 14.176459] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11 [ 20.176417] ath10k_pci :3a:00.0: could not suspend target (-11) [ 22.435758] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 25.432569] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11 [ 31.432925] ath10k_pci :3a:00.0: could not suspend target (-11) [ 33.687090] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 36.684683] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11 [ 42.685119] ath10k_pci :3a:00.0: could not suspend target (-11) [
[Kernel-packages] [Bug 1665589] Re: Killer 1535 802.11 2×2 Wi-Fi + BT 4.1 controller can't discover MS Mobile Mouse 3600
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: bluez (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1665589 Title: Killer 1535 802.11 2×2 Wi-Fi + BT 4.1 controller can't discover MS Mobile Mouse 3600 Status in bluez package in Ubuntu: Confirmed Bug description: I saw number of posts here about Mobile Mouse 3600 but sadly none of them helped me to debug the issue. I have Killer 1535 card on my Dell XPS 13. According to specs it's Bluetooth 4.1 device. Mobile Mouse 3600 is Bluetooth Low Energy device of version 4.0. In theory these two devices should be able to communicate. Unfortunately they don't :( I'm on Ubuntu MATE 16.10 but I also tested it on Linux Mint 18 and Element OS. I have bluez 5.41 installed. Here is what info I have abut my devices usb-devices | awk '/e301/' RS= T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e301 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb hciconfig -a | grep HCI HCI Version: 4.1 (0x7) Revision: 0x0 lsusb | grep Ath Bus 001 Device 004: ID 0cf3:e301 Atheros Communications, Inc. `sudo hcitool lescan` finds nothing. After clean installation `dmesg | grep ath10` gives [ 14.979939] ath10k_pci :3a:00.0: enabling device ( -> 0002) [ 14.981966] ath10k_pci :3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 15.263691] ath10k_pci :3a:00.0: Direct firmware load for ath10k/pre-cal-pci-:3a:00.0.bin failed with error -2 [ 15.263709] ath10k_pci :3a:00.0: Direct firmware load for ath10k/cal-pci-:3a:00.0.bin failed with error -2 [ 15.263734] ath10k_pci :3a:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2 [ 15.263736] ath10k_pci :3a:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2 [ 15.440154] ath10k_pci :3a:00.0: qca6174 hw3.2 target 0x0503 chip_id 0x00340aff sub 1a56:1535 [ 15.440156] ath10k_pci :3a:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 15.440582] ath10k_pci :3a:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5 [ 15.532098] ath10k_pci :3a:00.0: board_file api 2 bmi_id N/A crc32 6fc88fe7 [ 17.658135] ath10k_pci :3a:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 17.770412] ath10k_pci :3a:00.0 wlp58s0: renamed from wlan0 My WiFi works. I can also pair Bluetooth keyboard. Since I don't really know how device drivers work in Linux I noticed line with error about `firmware-5.bin` in output of dmesg. So I took missing file from https://github.com/kvalo/ath10k- firmware/tree/master/QCA6174/hw3.0/4.4. It turned out to be bad idea because it botched wifi/bluetooth completely. Here is what I had in log [3.519354] ath10k_pci :3a:00.0: enabling device ( -> 0002) [3.521259] ath10k_pci :3a:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [3.765880] ath10k_pci :3a:00.0: Direct firmware load for ath10k/cal-pci-:3a:00.0.bin failed with error -2 [3.831220] ath10k_pci :3a:00.0: failed to fetch board data for ath10k/QCA6174/hw3.0 from bus=pci,bmi-chip-id=0,bmi-board-id=0/board-2.bin [5.887772] ath10k_pci :3a:00.0: Unknown eventid: 90118 [5.887786] ath10k_pci :3a:00.0: qca6174 hw3.2 (0x0503, 0x00340aff bmi 0:0) fw WLAN.RM.4.4-00022-QCARMSWPZ-2 fwapi 5 bdapi 1 htt-ver 3.32 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 features wowlan,ignore-otp [5.887789] ath10k_pci :3a:00.0: debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [8.884160] ath10k_pci :3a:00.0: could not suspend target (-11) [8.966789] ath10k_pci :3a:00.0 wlp58s0: renamed from wlan0 [ 11.178547] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 14.176459] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11 [ 20.176417] ath10k_pci :3a:00.0: could not suspend target (-11) [ 22.435758] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 25.432569] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11 [ 31.432925] ath10k_pci :3a:00.0: could not suspend target (-11) [ 33.687090] ath10k_pci :3a:00.0: Unknown eventid: 90118 [ 36.684683] ath10k_pci :3a:00.0: failed to enable dynamic BW: -11 [ 42.685119] ath10k_pci
