[Kernel-packages] [Bug 1683577] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864787/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should
[Kernel-packages] [Bug 1683577] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864764/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should
[Kernel-packages] [Bug 1683577] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864749/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should
