[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
OK ,, https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1841304 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Fix Released Status in linux source package in Cosmic: Fix Released Bug description: [SRU justification] == Impact == Ethernet connection using a SKY2 card stops working after suspend. == Fix == A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. == Testcase == Suspend/resume with affected hardware present. == Risk of Regression == Very low as only changing a timeout value in a specific hardware driver. --- Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
ricardovitor, Please file a new bug, thanks. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Fix Released Status in linux source package in Cosmic: Fix Released Bug description: [SRU justification] == Impact == Ethernet connection using a SKY2 card stops working after suspend. == Fix == A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. == Testcase == Suspend/resume with affected hardware present. == Risk of Regression == Very low as only changing a timeout value in a specific hardware driver. --- Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
I'm new to the community, I wanted some guidance on how to report this bug. I have a Samsung RV510 Notebook, which uses this "sky 2" Driver to manage the Notebook's Lan network interface. Upon returning from sleep, the Lan interface stops working and only works when you completely restart the Notebook. I've read some comments here in the topic, including that the bugs were fixed in some kernel versions, but for me the version: 4.15.0-55.57 and 4.18.0-25.26 still have the same bug. I did some tests on other distros not based on Ubuntu and using newer Kernel, the problem also happens, very strange this problem. An interim solution I found in this topic was the "quiet splash pci = nomsi, noaer" which I believe has temporarily solved the problem. I appreciate the community response. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Fix Released Status in linux source package in Cosmic: Fix Released Bug description: [SRU justification] == Impact == Ethernet connection using a SKY2 card stops working after suspend. == Fix == A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. == Testcase == Suspend/resume with affected hardware present. == Risk of Regression == Very low as only changing a timeout value in a specific hardware driver. --- Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
** Tags added: cscc -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Fix Released Status in linux source package in Cosmic: Fix Released Bug description: [SRU justification] == Impact == Ethernet connection using a SKY2 card stops working after suspend. == Fix == A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. == Testcase == Suspend/resume with affected hardware present. == Risk of Regression == Very low as only changing a timeout value in a specific hardware driver. --- Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
kris (ski007), I think that I may have spoken too soon. I've been testing with the same "4.15.0-53-generic" kernel, and the issue seems that hasn't been resolved. Workaround is still: sudo modprobe -r sky2; sudo modprobe -i sky2 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Fix Released Status in linux source package in Cosmic: Fix Released Bug description: [SRU justification] == Impact == Ethernet connection using a SKY2 card stops working after suspend. == Fix == A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. == Testcase == Suspend/resume with affected hardware present. == Risk of Regression == Very low as only changing a timeout value in a specific hardware driver. --- Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
4.15.0-54-generic #58-Ubuntu SMP Mon Jun 24 10:55:24 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux with me nothing has changed the error remained I returned to: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash pci=nomsi,noaer" -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Fix Released Status in linux source package in Cosmic: Fix Released Bug description: [SRU justification] == Impact == Ethernet connection using a SKY2 card stops working after suspend. == Fix == A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. == Testcase == Suspend/resume with affected hardware present. == Risk of Regression == Very low as only changing a timeout value in a specific hardware driver. --- Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Confirmed fix with: "Linux 4.15.0-54-generic #58-Ubuntu SMP Mon Jun 24 10:55:24 UTC 2019 x86_64" Still waiting for the 4.18 series to "catch up", I'm still at: "Linux 4.18.0-17-generic #18~18.04.1-Ubuntu SMP Fri Mar 15 15:27:12 UTC 2019 x86_64" -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Fix Released Status in linux source package in Cosmic: Fix Released Bug description: [SRU justification] == Impact == Ethernet connection using a SKY2 card stops working after suspend. == Fix == A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. == Testcase == Suspend/resume with affected hardware present. == Risk of Regression == Very low as only changing a timeout value in a specific hardware driver. --- Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
this bug is platform dependent or maybe also from hardware? I am helped by adding options in grub / kernel GRUB_CMDLINE_LINUX_DEFAULT="quiet splash pci=nomsi,noaer" -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Fix Released Status in linux source package in Cosmic: Fix Released Bug description: [SRU justification] == Impact == Ethernet connection using a SKY2 card stops working after suspend. == Fix == A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. == Testcase == Suspend/resume with affected hardware present. == Risk of Regression == Very low as only changing a timeout value in a specific hardware driver. --- Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Socratis, this bug is platform dependent. Please file a new bug so we can find an in-kernel solution. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Fix Released Status in linux source package in Cosmic: Fix Released Bug description: [SRU justification] == Impact == Ethernet connection using a SKY2 card stops working after suspend. == Fix == A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. == Testcase == Suspend/resume with affected hardware present. == Risk of Regression == Very low as only changing a timeout value in a specific hardware driver. --- Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Sorry I couldn't test the pre-release version (out of order), but with my current version "4.15.0-50-generic", I still see the issue; the NICs aren't active upon wake up. I need the "/lib/systemd/system- sleep/sky2-refresh" workaround to make it happen: #!/bin/bash PROGNAME=$(basename "$0") state=$1 action=$2 function log { logger -i -t "$PROGNAME" "$*" } log "Running $action $state" if [[ $state == post ]]; then modprobe -r sky2 \ && log "Removed sky2 for Marvell Ethernet" \ && modprobe -i sky2 \ && log "Inserted sky2 for Marvell Ethernet" fi -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Fix Released Status in linux source package in Cosmic: Fix Released Bug description: [SRU justification] == Impact == Ethernet connection using a SKY2 card stops working after suspend. == Fix == A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. == Testcase == Suspend/resume with affected hardware present. == Risk of Regression == Very low as only changing a timeout value in a specific hardware driver. --- Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
This bug was fixed in the package linux - 4.15.0-50.54 --- linux (4.15.0-50.54) bionic; urgency=medium * CVE-2018-12126 // CVE-2018-12127 // CVE-2018-12130 - Documentation/l1tf: Fix small spelling typo - x86/cpu: Sanitize FAM6_ATOM naming - kvm: x86: Report STIBP on GET_SUPPORTED_CPUID - locking/atomics, asm-generic: Move some macros from to a new file - tools include: Adopt linux/bits.h - x86/msr-index: Cleanup bit defines - x86/speculation: Consolidate CPU whitelists - x86/speculation/mds: Add basic bug infrastructure for MDS - x86/speculation/mds: Add BUG_MSBDS_ONLY - x86/kvm: Expose X86_FEATURE_MD_CLEAR to guests - x86/speculation/mds: Add mds_clear_cpu_buffers() - x86/speculation/mds: Clear CPU buffers on exit to user - x86/kvm/vmx: Add MDS protection when L1D Flush is not active - x86/speculation/mds: Conditionally clear CPU buffers on idle entry - x86/speculation/mds: Add mitigation control for MDS - x86/speculation/mds: Add sysfs reporting for MDS - x86/speculation/mds: Add mitigation mode VMWERV - Documentation: Move L1TF to separate directory - Documentation: Add MDS vulnerability documentation - x86/speculation/mds: Add mds=full,nosmt cmdline option - x86/speculation: Move arch_smt_update() call to after mitigation decisions - x86/speculation/mds: Add SMT warning message - x86/speculation/mds: Fix comment - x86/speculation/mds: Print SMT vulnerable on MSBDS with mitigations off - x86/speculation/mds: Add 'mitigations=' support for MDS * CVE-2017-5715 // CVE-2017-5753 - s390/speculation: Support 'mitigations=' cmdline option * CVE-2017-5715 // CVE-2017-5753 // CVE-2017-5754 // CVE-2018-3639 - powerpc/speculation: Support 'mitigations=' cmdline option * CVE-2017-5715 // CVE-2017-5754 // CVE-2018-3620 // CVE-2018-3639 // CVE-2018-3646 - cpu/speculation: Add 'mitigations=' cmdline option - x86/speculation: Support 'mitigations=' cmdline option * Packaging resync (LP: #1786013) - [Packaging] resync git-ubuntu-log linux (4.15.0-49.53) bionic; urgency=medium * linux: 4.15.0-49.53 -proposed tracker (LP: #1826358) * Backport support for software count cache flush Spectre v2 mitigation. (CVE) (required for POWER9 DD2.3) (LP: #1822870) - powerpc/64s: Add support for ori barrier_nospec patching - powerpc/64s: Patch barrier_nospec in modules - powerpc/64s: Enable barrier_nospec based on firmware settings - powerpc: Use barrier_nospec in copy_from_user() - powerpc/64: Use barrier_nospec in syscall entry - powerpc/64s: Enhance the information in cpu_show_spectre_v1() - powerpc/64: Disable the speculation barrier from the command line - powerpc/64: Make stf barrier PPC_BOOK3S_64 specific. - powerpc/64: Add CONFIG_PPC_BARRIER_NOSPEC - powerpc/64: Call setup_barrier_nospec() from setup_arch() - powerpc/64: Make meltdown reporting Book3S 64 specific - powerpc/lib/code-patching: refactor patch_instruction() - powerpc/lib/feature-fixups: use raw_patch_instruction() - powerpc/asm: Add a patch_site macro & helpers for patching instructions - powerpc/64s: Add new security feature flags for count cache flush - powerpc/64s: Add support for software count cache flush - powerpc/pseries: Query hypervisor for count cache flush settings - powerpc/powernv: Query firmware for count cache flush settings - powerpc/fsl: Add nospectre_v2 command line argument - KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char() - [Config] Add CONFIG_PPC_BARRIER_NOSPEC * Packaging resync (LP: #1786013) - [Packaging] resync git-ubuntu-log * autopkgtests run too often, too much and don't skip enough (LP: #1823056) - [Debian] Set +x on rebuild testcase. - [Debian] Skip rebuild test, for regression-suite deps. - [Debian] Make ubuntu-regression-suite skippable on unbootable kernels. - [Debian] make rebuild use skippable error codes when skipping. - [Debian] Only run regression-suite, if requested to. * bionic: fork out linux-snapdragon into its own topic kernel (LP: #1820868) - [Packaging] remove arm64 snapdragon from getabis - [Config] config changes for snapdragon split - packaging: arm64: disable building the snapdragon flavour - [Packaging] arm64: Drop snapdragon from kernel-versions * CVE-2017-5753 - KVM: arm/arm64: vgic: fix possible spectre-v1 in vgic_get_irq() - media: dvb_ca_en50221: prevent using slot_info for Spectre attacs - sysvipc/sem: mitigate semnum index against spectre v1 - libahci: Fix possible Spectre-v1 pmp indexing in ahci_led_store() - s390/keyboard: sanitize array index in do_kdsk_ioctl - arm64: fix possible spectre-v1 write in ptrace_hbp_set_event() - KVM: arm/arm64: vgic: Fix possible spectre-v1 write in vgic_mmio_write_apr() - pktcdvd: Fix possible Spectre-v1 for pkt_d
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
This bug was fixed in the package linux - 4.18.0-20.21 --- linux (4.18.0-20.21) cosmic; urgency=medium * CVE-2018-12126 // CVE-2018-12127 // CVE-2018-12130 - Documentation/l1tf: Fix small spelling typo - x86/cpu: Sanitize FAM6_ATOM naming - kvm: x86: Report STIBP on GET_SUPPORTED_CPUID - locking/atomics, asm-generic: Move some macros from to a new file - tools include: Adopt linux/bits.h - x86/msr-index: Cleanup bit defines - x86/speculation: Consolidate CPU whitelists - x86/speculation/mds: Add basic bug infrastructure for MDS - x86/speculation/mds: Add BUG_MSBDS_ONLY - x86/kvm: Expose X86_FEATURE_MD_CLEAR to guests - x86/speculation/mds: Add mds_clear_cpu_buffers() - x86/speculation/mds: Clear CPU buffers on exit to user - x86/kvm/vmx: Add MDS protection when L1D Flush is not active - x86/speculation/mds: Conditionally clear CPU buffers on idle entry - x86/speculation/mds: Add mitigation control for MDS - x86/speculation/mds: Add sysfs reporting for MDS - x86/speculation/mds: Add mitigation mode VMWERV - Documentation: Move L1TF to separate directory - Documentation: Add MDS vulnerability documentation - x86/speculation/mds: Add mds=full,nosmt cmdline option - x86/speculation: Move arch_smt_update() call to after mitigation decisions - x86/speculation/mds: Add SMT warning message - x86/speculation/mds: Fix comment - x86/speculation/mds: Print SMT vulnerable on MSBDS with mitigations off - x86/speculation/mds: Add 'mitigations=' support for MDS * CVE-2017-5715 // CVE-2017-5753 - s390/speculation: Support 'mitigations=' cmdline option * CVE-2017-5715 // CVE-2017-5753 // CVE-2017-5754 // CVE-2018-3639 - powerpc/speculation: Support 'mitigations=' cmdline option * CVE-2017-5715 // CVE-2017-5754 // CVE-2018-3620 // CVE-2018-3639 // CVE-2018-3646 - cpu/speculation: Add 'mitigations=' cmdline option - x86/speculation: Support 'mitigations=' cmdline option * Packaging resync (LP: #1786013) - [Packaging] resync git-ubuntu-log linux (4.18.0-19.20) cosmic; urgency=medium * linux: 4.18.0-19.20 -proposed tracker (LP: #1826171) * Packaging resync (LP: #1786013) - [Packaging] resync git-ubuntu-log * autopkgtests run too often, too much and don't skip enough (LP: #1823056) - [Debian] Set +x on rebuild testcase. - [Debian] Skip rebuild test, for regression-suite deps. - [Debian] Make ubuntu-regression-suite skippable on unbootable kernels. - [Debian] make rebuild use skippable error codes when skipping. - [Debian] Only run regression-suite, if requested to. * CVE-2017-5753 - s390/keyboard: sanitize array index in do_kdsk_ioctl - drm/bufs: Fix Spectre v1 vulnerability - drivers/misc/sgi-gru: fix Spectre v1 vulnerability - ipv4: Fix potential Spectre v1 vulnerability - aio: fix spectre gadget in lookup_ioctx - ALSA: emux: Fix potential Spectre v1 vulnerabilities - ALSA: pcm: Fix potential Spectre v1 vulnerability - ip6mr: Fix potential Spectre v1 vulnerability - ALSA: rme9652: Fix potential Spectre v1 vulnerability - ALSA: emu10k1: Fix potential Spectre v1 vulnerabilities - KVM: arm/arm64: vgic: Fix off-by-one bug in vgic_get_irq() - drm/ioctl: Fix Spectre v1 vulnerabilities - net: core: Fix Spectre v1 vulnerability - phonet: af_phonet: Fix Spectre v1 vulnerability - nfc: af_nfc: Fix Spectre v1 vulnerability - can: af_can: Fix Spectre v1 vulnerability - net: Revert recent Spectre-v1 patches. - char/mwave: fix potential Spectre v1 vulnerability - applicom: Fix potential Spectre v1 vulnerabilities - ipmi: msghandler: Fix potential Spectre v1 vulnerabilities - powerpc/ptrace: Mitigate potential Spectre v1 - cfg80211: prevent speculation on cfg80211_classify8021d() return - ALSA: rawmidi: Fix potential Spectre v1 vulnerability - ALSA: seq: oss: Fix Spectre v1 vulnerability * NULL pointer dereference when using z3fold and zswap (LP: #1814874) - z3fold: fix possible reclaim races * The Realtek card reader does not enter PCIe 1.1/1.2 (LP: #1825487) - misc: rtsx: Enable OCP for rts522a rts524a rts525a rts5260 - SAUCE: misc: rtsx: Fixed rts5260 power saving parameter and sd glitch * headset-mic doesn't work on two Dell laptops. (LP: #1825272) - ALSA: hda/realtek - add two more pin configuration sets to quirk table * CVE-2018-16884 - sunrpc: use SVC_NET() in svcauth_gss_* functions - sunrpc: use-after-free in svc_process_common() * AMD Rome : Minimal support patches (LP: #1816669) - x86: irq_remapping: Move irq remapping mode enum - iommu/amd: Add support for higher 64-bit IOMMU Control Register - iommu/amd: Add support for IOMMU XT mode * sky2 ethernet card don't work after returning from suspension (LP: #1798921) - sky2: Increase D3 delay again * CVE-2019-9500 - brcmfmac: assure
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Hi Podesta, Socratis and everyone affected, Could you please test the Bionic (4.15) and/or Cosmic (4.18) kernels currently available in -proposed to verify if the fix applied really fixes the issue reported? Please see the instructions on the comments above describing how to install the kernels. Any help is verifying this fix would be much appreciated. Thank you. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Fix Committed Status in linux source package in Cosmic: Fix Committed Bug description: [SRU justification] == Impact == Ethernet connection using a SKY2 card stops working after suspend. == Fix == A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. == Testcase == Suspend/resume with affected hardware present. == Risk of Regression == Very low as only changing a timeout value in a specific hardware driver. --- Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
This bug is awaiting verification that the kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed- bionic' to 'verification-done-bionic'. If the problem still exists, change the tag 'verification-needed-bionic' to 'verification-failed- bionic'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: verification-needed-bionic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Fix Committed Status in linux source package in Cosmic: Fix Committed Bug description: [SRU justification] == Impact == Ethernet connection using a SKY2 card stops working after suspend. == Fix == A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. == Testcase == Suspend/resume with affected hardware present. == Risk of Regression == Very low as only changing a timeout value in a specific hardware driver. --- Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
This bug is awaiting verification that the kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed- cosmic' to 'verification-done-cosmic'. If the problem still exists, change the tag 'verification-needed-cosmic' to 'verification-failed- cosmic'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: verification-needed-cosmic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Fix Committed Status in linux source package in Cosmic: Fix Committed Bug description: [SRU justification] == Impact == Ethernet connection using a SKY2 card stops working after suspend. == Fix == A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. == Testcase == Suspend/resume with affected hardware present. == Risk of Regression == Very low as only changing a timeout value in a specific hardware driver. --- Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
** Changed in: linux (Ubuntu Bionic) Status: Confirmed => Fix Committed ** Changed in: linux (Ubuntu Cosmic) Status: Confirmed => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Fix Committed Status in linux source package in Cosmic: Fix Committed Bug description: [SRU justification] == Impact == Ethernet connection using a SKY2 card stops working after suspend. == Fix == A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. == Testcase == Suspend/resume with affected hardware present. == Risk of Regression == Very low as only changing a timeout value in a specific hardware driver. --- Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
** Description changed: + [SRU justification] + + == Impact == + Ethernet connection using a SKY2 card stops working after suspend. + + == Fix == + A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. + + == Testcase == + Suspend/resume with affected hardware present. + + == Risk of Regression == + Very low as only changing a timeout value in a specific hardware driver. + + --- + Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network-manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Confirmed Status in linux source package in Cosmic: Confirmed Bug description: [SRU justification] == Impact == Ethernet connection using a SKY2 card stops working after suspend. == Fix == A fix for this landed in v5.0 upstream and was picked up in Xenial via upstream stable but not yet in Bionic and Cosmic. The change simply increases a timeout. == Testcase == Suspend/resume with affected hardware present. == Risk of Regression == Very low as only changing a timeout value in a specific hardware driver. --- Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Hey there, I'm having this issue with a Mint 19 (bionic) installation and two Marvell 88E8053 NICs. Logged in, press the power button or the Suspend menu, computer goes to sleep. When awoken from the power button, "Network cable is disconnected". I found the workaround of "sudo modprobe -r sky2; modprobe -i sky2" to work quite nicely. $ uname -rms Linux 4.15.0-47-generic x86_64 Tested with: * linux-image-4.15.0-47-generic/bionic-updates,bionic-security,now 4.15.0-47.50 amd64 * linux-image-4.18.0-17-generic/bionic-updates,bionic-security,now 4.18.0-17.18~18.04.1 amd64 If you need any more details, please feel free to be as analytical as possible ;) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Confirmed Status in linux source package in Cosmic: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
** Changed in: linux (Ubuntu Bionic) Status: New => Confirmed ** Changed in: linux (Ubuntu Cosmic) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: Confirmed Status in linux source package in Cosmic: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
** Changed in: linux (Ubuntu Bionic) Importance: Undecided => Medium ** Changed in: linux (Ubuntu Cosmic) Importance: Undecided => Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: New Status in linux source package in Cosmic: New Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
** Tags removed: verification-needed-xenial ** Tags added: verification-done-xenial -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Status in linux source package in Bionic: New Status in linux source package in Cosmic: New Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
This bug was fixed in the package linux - 4.4.0-145.171 --- linux (4.4.0-145.171) xenial; urgency=medium * linux: 4.4.0-145.171 -proposed tracker (LP: #1821724) * linux-generic should depend on linux-base >=4.1 (LP: #1820419) - [Packaging] Fix linux-base dependency linux (4.4.0-144.170) xenial; urgency=medium * linux: 4.4.0-144.170 -proposed tracker (LP: #1819660) * Packaging resync (LP: #1786013) - [Packaging] resync getabis - [Packaging] update helper scripts - [Packaging] resync retpoline extraction * C++ demangling support missing from perf (LP: #1396654) - [Packaging] fix a mistype * CVE-2019-9213 - mm: enforce min addr even if capable() in expand_downwards() * CVE-2019-3460 - Bluetooth: Check L2CAP option sizes returned from l2cap_get_conf_opt * Xenial update: 4.4.176 upstream stable release (LP: #1818815) - net: fix IPv6 prefix route residue - vsock: cope with memory allocation failure at socket creation time - hwmon: (lm80) Fix missing unlock on error in set_fan_div() - net: Fix for_each_netdev_feature on Big endian - net: Add header for usage of fls64() - tcp: tcp_v4_err() should be more careful - net: Do not allocate page fragments that are not skb aligned - tcp: clear icsk_backoff in tcp_write_queue_purge() - vxlan: test dev->flags & IFF_UP before calling netif_rx() - net: stmmac: Fix a race in EEE enable callback - net: ipv4: use a dedicated counter for icmp_v4 redirect packets - x86: livepatch: Treat R_X86_64_PLT32 as R_X86_64_PC32 - mfd: as3722: Handle interrupts on suspend - mfd: as3722: Mark PM functions as __maybe_unused - net/x25: do not hold the cpu too long in x25_new_lci() - mISDN: fix a race in dev_expire_timer() - ax25: fix possible use-after-free - Linux 4.4.176 * sky2 ethernet card don't work after returning from suspension (LP: #1798921) // Xenial update: 4.4.176 upstream stable release (LP: #1818815) - sky2: Increase D3 delay again * Xenial update: 4.4.175 upstream stable release (LP: #1818813) - drm/bufs: Fix Spectre v1 vulnerability - staging: iio: adc: ad7280a: handle error from __ad7280_read32() - ASoC: Intel: mrfld: fix uninitialized variable access - scsi: lpfc: Correct LCB RJT handling - ARM: 8808/1: kexec:offline panic_smp_self_stop CPU - dlm: Don't swamp the CPU with callbacks queued during recovery - x86/PCI: Fix Broadcom CNB20LE unintended sign extension (redux) - powerpc/pseries: add of_node_put() in dlpar_detach_node() - serial: fsl_lpuart: clear parity enable bit when disable parity - ptp: check gettime64 return code in PTP_SYS_OFFSET ioctl - staging:iio:ad2s90: Make probe handle spi_setup failure - staging: iio: ad7780: update voltage on read - ARM: OMAP2+: hwmod: Fix some section annotations - modpost: validate symbol names also in find_elf_symbol - perf tools: Add Hygon Dhyana support - soc/tegra: Don't leak device tree node reference - f2fs: move dir data flush to write checkpoint process - f2fs: fix wrong return value of f2fs_acl_create - sunvdc: Do not spin in an infinite loop when vio_ldc_send() returns EAGAIN - nfsd4: fix crash on writing v4_end_grace before nfsd startup - arm64: ftrace: don't adjust the LR value - ARM: dts: mmp2: fix TWSI2 - x86/fpu: Add might_fault() to user_insn() - media: DaVinci-VPBE: fix error handling in vpbe_initialize() - smack: fix access permissions for keyring - usb: hub: delay hub autosuspend if USB3 port is still link training - timekeeping: Use proper seqcount initializer - ARM: dts: Fix OMAP4430 SDP Ethernet startup - mips: bpf: fix encoding bug for mm_srlv32_op - iommu/arm-smmu-v3: Use explicit mb() when moving cons pointer - sata_rcar: fix deferred probing - clk: imx6sl: ensure MMDC CH0 handshake is bypassed - cpuidle: big.LITTLE: fix refcount leak - i2c-axxia: check for error conditions first - udf: Fix BUG on corrupted inode - ARM: pxa: avoid section mismatch warning - ASoC: fsl: Fix SND_SOC_EUKREA_TLV320 build error on i.MX8M - memstick: Prevent memstick host from getting runtime suspended during card detection - tty: serial: samsung: Properly set flags in autoCTS mode - arm64: KVM: Skip MMIO insn after emulation - powerpc/uaccess: fix warning/error with access_ok() - mac80211: fix radiotap vendor presence bitmap handling - xfrm6_tunnel: Fix spi check in __xfrm6_tunnel_alloc_spi - Bluetooth: Fix unnecessary error message for HCI request completion - cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan() - drbd: narrow rcu_read_lock in drbd_sync_handshake - drbd: disconnect, if the wrong UUIDs are attached on a connected peer - drbd: skip spurious timeout (ping-timeo) when failing promote - drbd: Avoid Clang warning about pointless switch statment - video: c
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Hello, As Stefan mentioned on comment #38, this fix is for now available only on xenial/linux 4.4 kernels, which received the patch as part of an stable upstream update. So only this kernel needs verification for now. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Committed Status in linux source package in Bionic: New Status in linux source package in Cosmic: New Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
I can not check the kernel v5.0-rc8 because I have other errors regarding the nvidia graphics card and the system does not start -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Committed Status in linux source package in Bionic: New Status in linux source package in Cosmic: New Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
This bug is awaiting verification that the kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed- xenial' to 'verification-done-xenial'. If the problem still exists, change the tag 'verification-needed-xenial' to 'verification-failed- xenial'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: verification-needed-xenial -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Committed Status in linux source package in Bionic: New Status in linux source package in Cosmic: New Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
** Changed in: linux (Ubuntu) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Committed Status in linux source package in Bionic: New Status in linux source package in Cosmic: New Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
** Also affects: linux (Ubuntu Cosmic) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Xenial) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Bionic) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Status in linux source package in Xenial: Fix Committed Status in linux source package in Bionic: New Status in linux source package in Cosmic: New Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
This actually came to Xenial via upstream stable 4.4.176. This went into v5.0-rc8 upstream, so it is by now released on devel/disco. I am adding additional nominations to act as reminders for those releases. ** Changed in: linux (Ubuntu Xenial) Importance: Undecided => Medium ** Changed in: linux (Ubuntu Xenial) Status: New => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Committed Status in linux source package in Bionic: New Status in linux source package in Cosmic: New Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Sorry for the late reply. Sent a patch: https://lkml.org/lkml/2019/2/19/513 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Sorry, didn't realize what was meant. I don't use WoL, only suspend (manually or by closing the lid). Resume works for me with the 4.13 kernels Mint provided so far. All of the 4.15 kernels I tried so far didn't work. I've also filed https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1807259 for this issue. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
For me, it works with any 4.13 kernel. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
So there are three different issue: Podesta's (original bug reporter): increase D3 delay can workaround the issue. Kris': non-maskable MSI issued IRQ before device resume, we probably need a DMI quirk table to let affected platforms use INTx. WoL: Does it ever work in previous kernel versions? Anyway please file a new bugs for separate issues. I'll upstream a fix for Podesta's issue as he's the original bug reporter. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
I have the same problem. I am on "Linux Mint 18.2 Sonya". Upgrading to Kernel 4.15.0-39.42~16.04.1 showed the same problem. I reverted to a 4.13 kernel for this reason. $ lshw -class network WARNUNG: Sie sollten dieses Programm mit Systemverwalterrechten (root) ausführen. *-network DEAKTIVIERT Beschreibung: Kabellose Verbindung Produkt: BCM4312 802.11b/g LP-PHY Hersteller: Broadcom Corporation Physische ID: 0 Bus-Informationen: pci@:0c:00.0 Logischer Name: wlp12s0 Version: 01 Seriennummer: 00:26:5e:33:a9:6d Breite: 64 bits Takt: 33MHz Fähigkeiten: bus_master cap_list ethernet physical wireless Konfiguration: broadcast=yes driver=wl0 driverversion=6.30.223.271 (r587334) latency=0 multicast=yes wireless=IEEE 802.11 Ressourcen: irq:17 memory:f69fc000-f69f *-network Beschreibung: Ethernet interface Produkt: 88E8040 PCI-E Fast Ethernet Controller Hersteller: Marvell Technology Group Ltd. Physische ID: 0 Bus-Informationen: pci@:09:00.0 Logischer Name: enp9s0 Version: 13 Seriennummer: 00:25:64:4a:26:00 Größe: 100Mbit/s Kapazität: 100Mbit/s Breite: 64 bits Takt: 33MHz Fähigkeiten: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.7 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s Ressourcen: irq:24 memory:f68fc000-f68f ioport:de00(Größe=256) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Would this bug effect WoL functionality? I've not experienced connectivity problems after resuming from suspend (using power button) but I only log into one account and use a pre- assigned IP address. Bios and WoL flags are set correctly withing netplan yaml config file but I cannot get the computer to wake using WoL. I can see that the router is sending the magic packet information as well. This leads to conclude that this bug could be affecting this functionality? dump of lsci -vvnn: --- 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12) Subsystem: ASUSTeK Computer Inc. Motherboard [1043:81f8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Hello I no longer use the suspend option I replaced the HDD drive with SSD :-) if you need a command result from a Samsung R780 laptop I give it: http://paste.ubuntu.com/p/9qfjpvSgd7/ -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Please attach `sudo lspci -vvnn`. I'd like to see if it support MSI-X or maskable MSI. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
I wonder what performance penalty "pci=nomsi,noaer" would has? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
I'm sorry but it's probably the fault of a particular laptop Samsung R780 :-( I checked the recurring error on the internet : [ 380.567633] do_IRQ: 3.34 No irq handler for vector I applied fix to grub file : pci=nomsi,noaer GRUB_CMDLINE_LINUX_DEFAULT="quiet splash pci=nomsi,noaer" update-grub / reboot and everything works fine ??? :-) The sky2 ethernet card works well after coming back from the suspension ! but why do not I need this entry on my laptop on Debian with the 4.9.x.x kernel? I have no idea ... regards! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
I'm running Gentoo with a 4.19.1 kernel on a macbook 3.1. If you want me to revert that git, do bissects, etc, please just ask, I won't be able to run debian/ubuntu kernels. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
what to do if no one can fix it :-) I know the fix #15 it will be harder for other linux users :-( -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Kris, So your issue happens since commit bc976233a872. Once Debian starts using kernel > 4.14 then the issue will resurface again. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
I'm now using Debian - everything works OK ? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
:-) I installed the kernel again from the link https://people.canonical.com/~khfeng/lp1798921/ the error with me is the same dmesg : http://paste.ubuntu.com/p/CWBzNfHn98/ I'm not testing anymore regards! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
The head of your dmesg is "Linux version 4.15.0-39-generic (buildd@lgw01-amd64-054)" so it's not built by me. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
maybe someone else will help with this error ... :-( regards! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
No it's not. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Here you are #9 :-) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Please provide dmesg when the issue happens, under kernel in #7. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
And this is not the same as #7 ? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Kris, have you tried kernel in #3? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
I will say yes, I have three systems Linux Mint / Xubuntu / Debian (stretch) Debian (stretch) stable: kernel 4.9.XXX - sky2 / suspend - OK Linux Mint 18.3 Sylvia: kernel 4.13. XX - sky2 / suspend - OK Xubuntu 18.04.1 LTS: kernel 4.19.1 - sky2 / suspend - Error sky2 works OK also on kernel 4.14.xxx I think sky2 does not work correctly on kernels above 4.14 but I am not a specialist, maybe others will speak :-) for now I will still use this fix: cd /lib/systemd/system-sleep/restore_connection #!/bin/sh sleep 5 case $1/$2 in post/*) sudo systemctl restart network-manager.service modprobe -r sky2 modprobe sky2 ;; esac . regards! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
> * Boot Computer -> login to BOB -> Suspend -> Wake -> login to BOB => NO > PROBLEMS. Then the issue is solve, from kernel's perspective. > * Boot Computer -> login to BOB -> Suspend -> Wake -> Login to MARY => FAIL. Under the fail case, can you establish internet connection manually via NetworkManager? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
I ran some tests today to try and pinpoint it a little better, and understand why I didn't encounter it when testing a couple days ago. For me, the case seems to be related to the user that suspends. I couldn't find any difference between the kernel "4.15.0-38-generic #41-Ubuntu" and "4.15.0-39-generic #42~lp1798921", meaning that on my tests, they both happened and didn't happen under the same circumstances. * Boot Computer -> login to BOB -> Suspend -> Wake -> login to BOB => NO PROBLEMS. No matter how many times I tried, as long as I suspended and when woke logged back in to the same user, I never encountered the bug. * Boot Computer -> login to BOB -> Suspend -> Wake -> Login to MARY => FAIL. If when I returned from suspend I logged in to a different user, I always encountered the bug. * Boot Computer -> login to BOB -> Suspend -> Wake -> Suspend again -> login to BOB => FAIL. If when I woke from the first sleep, the pc went back to suspend, and only then I logged back in to BOB, I encountered the bug 100% of the time. * Boot Computer -> login to BOB -> Lock screen(change user) -> Login to MARY -> Suspend -> Wake -> Login to BOB => NO PROBLEMS. Again, once I return from suspend, logging back to the user that 'established the connection' means I don't have any issues. * Boot Computer -> login to BOB -> Lock screen(change user) -> Login to MARY -> Suspend -> Wake -> Login to MARY => FAIL. Now, if I login to a different user, even if it is the user that performed the suspend, I always encountered the bug. * The instance that was not clear cut is when I logged out of a user, instead of simply changing users. So for example, login to BOB, suspend, wake, login to BOB, logout, and then go to Mary. I very rarely encountered issues, but it did happen a couple times, so I'm not sure on this point. One very important thing to note is that when the bug happens, it sticks up no matter what. So, if I encounter the bug, and do the workaround fix with the modprobe command, the bug will happen again in the next suspend, no matter in which circunstance. A reboot restores things to normal. Not sure if my case is similar to yours kris, but hopefully this bit helps a bit more to pinpoint the issue. ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed ** Description changed: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network-manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux - *-network -description: Ethernet interface -product: 88E8040 PCI-E Fast Ethernet Controller -vendor: Marvell Technology Group Ltd. -physical id: 0 -bus info: pci@:09:00.0 -logical name: enp9s0 -version: 13 -serial: 00:23:ae:ea:23:3e -size: 100Mbit/s -capacity: 100Mbit/s -width: 64 bits -clock: 33MHz -capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation -configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s -resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) + *-network + description: Ethernet interface + product: 88E8040 PCI-E Fast Ethernet Controller + vendor: Marvell Technology Group Ltd. + physical id: 0 + bus info: pci@:09:00.0 + logical name: enp9s0 + version: 13 + serial: + size: 100Mbit/s + capacity: 100Mbit/s + width: 64 bits + clock: 33MHz + capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation + configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s + resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Confirmed Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but a
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
and which kernel is corrected :-) Now I have : Linux kris-R780 4.19.1-041901-generic #201811041431 SMP Sun Nov 4 14:33:06 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux the same error -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Incomplete Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: 00:23:ae:ea:23:3e size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Thanks. I'll upstream the change when you confirm it really fixes the issue. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Incomplete Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: 00:23:ae:ea:23:3e size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
I came in to apologize for not testing the posted kernel before and finally do it. Went on to use the ethernet only since yesterday, and couldn't get the bug anymore, while it happened 100% of the time before. kris, could you test if you are still getting it with the latest normal ubuntu kernel? 4.15.0-38-generic #41-Ubuntu SMP Wed Oct 10 10:59:38 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux I'll still try the posted kernel and see if the problem happens again. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Incomplete Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: 00:23:ae:ea:23:3e size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
my dmesg saved on pastebinit https://paste.ubuntu.com/p/nbFhQwWVVP/ however, the error ends on the line [ 380.567633] do_IRQ: 3.34 No irq handler for vector further entries after the option: rmmod sky2 modprobe sky2 to get internet access and pastebinit services :-) regards -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Incomplete Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: 00:23:ae:ea:23:3e size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Please attach the dmesg when the issue happens, thanks! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Incomplete Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: 00:23:ae:ea:23:3e size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
uname -a Linux kris-R780 4.15.0-39-generic #42~lp1798921 SMP Wed Oct 24 05:59:26 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux after waking up with the option suspend helps only: rmmod sky2 modprobe sky2 :-) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Incomplete Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: 00:23:ae:ea:23:3e size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
I just installed it it does not work there is still an error: "sky2 ethernet card do not work after returning from suspension" regards -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Incomplete Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: 00:23:ae:ea:23:3e size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
kris, Please try the kernel in https://people.canonical.com/~khfeng/lp1798921/ Best regards, -- Cristian Aravena Romero (caravena) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Incomplete Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: 00:23:ae:ea:23:3e size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
4.19.0-041900-generic kernel-bug-exists-upstream :-( -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Incomplete Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: 00:23:ae:ea:23:3e size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Please try the kernel in https://people.canonical.com/~khfeng/lp1798921/ -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Incomplete Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: 00:23:ae:ea:23:3e size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1798921] Re: sky2 ethernet card don't work after returning from suspension
Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v4.19 kernel[0]. If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'. Once testing of the upstream kernel is complete, please mark this bug as "Confirmed". Thanks in advance. [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.19 ** Changed in: linux (Ubuntu) Importance: Undecided => Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1798921 Title: sky2 ethernet card don't work after returning from suspension Status in linux package in Ubuntu: Incomplete Bug description: Bug very similar to #1752772 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772) but affecting the sky2 driver instead of r8169. After system suspend the ethernet connection stops working. The card is still up and the modem can see it is connected, but the card doesn't get an ip address. Ifconfig down/up and restarting network- manager does not solve the issue. Similarly to the other bug, "sudo modprobe sky2 -r" an then "sudo modprobe sky2" solves the issue. Relevant: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1752772/comments/107 Linux 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@:09:00.0 logical name: enp9s0 version: 13 serial: 00:23:ae:ea:23:3e size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f68fc000-f68f ioport:de00(size=256) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798921/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp