[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
I changed the tag for "verification-needed-focal" to "verification-done- focal", but I would like to add that the version of the kernel listed on the "focal" fix above is 5.8, when in fact the GA kernel for focal is 5.4. Kernel 5.8 has been an HWE kernel for focal in the past but even then it's already superceed by 5.11 and now 5.13. I think 5.4 is not mentioned here because the change came from upstream and not from a local patch. Anyway, 5.4.0-90 has the fix. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: Fix Released Status in linux source package in Bionic: Fix Committed Status in linux source package in Focal: Fix Committed Status in linux source package in Hirsute: Fix Released Bug description: [Impact] bnx2x driver won't add all devices ports/interfaces. [Test case] Boot system with bnx2x device and verify all ports/interfaces have been added. [Potential regression] bnx2x devices won't be properly probed. Devices won't be added or SR-IOV won't be correctly supported. --- Original Description --- Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
I can confirm that this is fixed for focal GA kernel. Kernel 5.4.0-89 still have the problem and kernel 5.4.0-90 is fixed, I can see all nics on the card now. ** Tags removed: verification-needed-focal ** Tags added: verification-done-focal -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: Fix Released Status in linux source package in Bionic: Fix Committed Status in linux source package in Focal: Fix Committed Status in linux source package in Hirsute: Fix Released Bug description: [Impact] bnx2x driver won't add all devices ports/interfaces. [Test case] Boot system with bnx2x device and verify all ports/interfaces have been added. [Potential regression] bnx2x devices won't be properly probed. Devices won't be added or SR-IOV won't be correctly supported. --- Original Description --- Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
This bug was fixed in the package linux - 5.13.0-21.21 --- linux (5.13.0-21.21) impish; urgency=medium * impish/linux: 5.13.0-21.21 -proposed tracker (LP: #1947347) * It hangs while booting up with AMD W6800 [1002:73A3] (LP: #1945553) - drm/amdgpu: Rename flag which prevents HW access - drm/amd/pm: Fix a bug communicating with the SMU (v5) - drm/amd/pm: Fix a bug in semaphore double-lock * Add final-checks to check certificates (LP: #1947174) - [Packaging] Add system trusted and revocation keys final check * No sound on Lenovo laptop models Legion 15IMHG05, Yoga 7 14ITL5, and 13s Gen2 (LP: #1939052) - ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops. - ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2 * Check for changes relevant for security certifications (LP: #1945989) - [Packaging] Add a new fips-checks script - [Packaging] Add fips-checks as part of finalchecks * BCM57800 SRIOV bug causes interfaces to disappear (LP: #1945707) - bnx2x: Fix enabling network interfaces without VFs * CVE-2021-3759 - memcg: enable accounting of ipc resources * [impish] Remove the downstream xr-usb-uart driver (LP: #1945938) - SAUCE: xr-usb-serial: remove driver - [Config] update modules list * Fix A yellow screen pops up in an instant (< 1 second) and then disappears before loading the system (LP: #1945932) - drm/i915: Stop force enabling pipe bottom color gammma/csc * Impish update: v5.13.18 upstream stable release (LP: #1946249) - Linux 5.13.18 * Impish update: v5.13.17 upstream stable release (LP: #1946247) - locking/mutex: Fix HANDOFF condition - regmap: fix the offset of register error log - regulator: tps65910: Silence deferred probe error - crypto: mxs-dcp - Check for DMA mapping errors - sched/deadline: Fix reset_on_fork reporting of DL tasks - power: supply: axp288_fuel_gauge: Report register-address on readb / writeb errors - crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop() - sched/deadline: Fix missing clock update in migrate_task_rq_dl() - rcu/tree: Handle VM stoppage in stall detection - EDAC/mce_amd: Do not load edac_mce_amd module on guests - hrtimer: Avoid double reprogramming in __hrtimer_start_range_ns() - hrtimer: Ensure timerfd notification for HIGHRES=n - udf: Check LVID earlier - udf: Fix iocharset=utf8 mount option - isofs: joliet: Fix iocharset=utf8 mount option - bcache: add proper error unwinding in bcache_device_init - nbd: add the check to prevent overflow in __nbd_ioctl() - blk-throtl: optimize IOPS throttle for large IO scenarios - nvme-tcp: don't update queue count when failing to set io queues - nvme-rdma: don't update queue count when failing to set io queues - nvmet: pass back cntlid on successful completion - power: supply: smb347-charger: Add missing pin control activation - power: supply: max17042_battery: fix typo in MAx17042_TOFF - s390/cio: add dev_busid sysfs entry for each subchannel - s390/zcrypt: fix wrong offset index for APKA master key valid state - libata: fix ata_host_start() - sched/topology: Skip updating masks for non-online nodes - crypto: omap - Fix inconsistent locking of device lists - crypto: qat - do not ignore errors from enable_vf2pf_comms() - crypto: qat - handle both source of interrupt in VF ISR - crypto: qat - fix reuse of completion variable - crypto: qat - fix naming for init/shutdown VF to PF notifications - crypto: qat - do not export adf_iov_putmsg() - crypto: hisilicon/sec - fix the abnormal exiting process - crypto: hisilicon/sec - modify the hardware endian configuration - crypto: tcrypt - Fix missing return value check - fcntl: fix potential deadlocks for _struct.lock - fcntl: fix potential deadlock for _struct.fa_lock - udf_get_extendedattr() had no boundary checks. - io-wq: remove GFP_ATOMIC allocation off schedule out path - s390/kasan: fix large PMD pages address alignment check - s390/pci: fix misleading rc in clp_set_pci_fn() - s390/debug: keep debug data on resize - s390/debug: fix debug area life cycle - s390/ap: fix state machine hang after failure to enable irq - sched/debug: Don't update sched_domain debug directories before sched_debug_init() - power: supply: cw2015: use dev_err_probe to allow deferred probe - m68k: emu: Fix invalid free in nfeth_cleanup() - crypto: x86/aes-ni - add missing error checks in XTS code - crypto: ecc - handle unaligned input buffer in ecc_swap_digits - sched/numa: Fix is_core_idle() - sched: Fix UCLAMP_FLAG_IDLE setting - rcu: Fix to include first blocked task in stall warning - rcu: Fix stall-warning deadlock due to non-release of
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
This bug was fixed in the package linux - 5.11.0-40.44 --- linux (5.11.0-40.44) hirsute; urgency=medium * hirsute/linux: 5.11.0-40.44 -proposed tracker (LP: #1947876) * Packaging resync (LP: #1786013) - debian/dkms-versions -- update from kernel-versions (main/2021.10.18) linux (5.11.0-39.43) hirsute; urgency=medium * hirsute/linux: 5.11.0-39.43 -proposed tracker (LP: #1947227) * Packaging resync (LP: #1786013) - debian/dkms-versions -- update from kernel-versions (main/2021.10.18) * Add final-checks to check certificates (LP: #1947174) - [Packaging] Add system trusted and revocation keys final check * No sound on Lenovo laptop models Legion 15IMHG05, Yoga 7 14ITL5, and 13s Gen2 (LP: #1939052) - ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops. - ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2 * Fix cold plugged USB device on certain PCIe USB cards (LP: #1945211) - Revert "UBUNTU: SAUCE: Revert "usb: core: reduce power-on-good delay time of root hub"" - usb: core: hcd: Add support for deferring roothub registration - xhci: Set HCD flag to defer primary roothub registration - usb: core: hcd: Modularize HCD stop configuration in usb_stop_hcd() * Hirsute update: upstream stable patchset 2021-10-12 (LP: #1946788) - locking/mutex: Fix HANDOFF condition - regmap: fix the offset of register error log - regulator: tps65910: Silence deferred probe error - crypto: mxs-dcp - Check for DMA mapping errors - sched/deadline: Fix reset_on_fork reporting of DL tasks - power: supply: axp288_fuel_gauge: Report register-address on readb / writeb errors - crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop() - sched/deadline: Fix missing clock update in migrate_task_rq_dl() - rcu/tree: Handle VM stoppage in stall detection - EDAC/mce_amd: Do not load edac_mce_amd module on guests - hrtimer: Avoid double reprogramming in __hrtimer_start_range_ns() - hrtimer: Ensure timerfd notification for HIGHRES=n - udf: Check LVID earlier - udf: Fix iocharset=utf8 mount option - isofs: joliet: Fix iocharset=utf8 mount option - bcache: add proper error unwinding in bcache_device_init - blk-throtl: optimize IOPS throttle for large IO scenarios - nvme-tcp: don't update queue count when failing to set io queues - nvme-rdma: don't update queue count when failing to set io queues - nvmet: pass back cntlid on successful completion - power: supply: smb347-charger: Add missing pin control activation - power: supply: max17042_battery: fix typo in MAx17042_TOFF - s390/cio: add dev_busid sysfs entry for each subchannel - s390/zcrypt: fix wrong offset index for APKA master key valid state - libata: fix ata_host_start() - crypto: omap - Fix inconsistent locking of device lists - crypto: qat - do not ignore errors from enable_vf2pf_comms() - crypto: qat - handle both source of interrupt in VF ISR - crypto: qat - fix reuse of completion variable - crypto: qat - fix naming for init/shutdown VF to PF notifications - crypto: qat - do not export adf_iov_putmsg() - fcntl: fix potential deadlock for _struct.fa_lock - udf_get_extendedattr() had no boundary checks. - s390/kasan: fix large PMD pages address alignment check - s390/pci: fix misleading rc in clp_set_pci_fn() - s390/debug: keep debug data on resize - s390/debug: fix debug area life cycle - s390/ap: fix state machine hang after failure to enable irq - power: supply: cw2015: use dev_err_probe to allow deferred probe - m68k: emu: Fix invalid free in nfeth_cleanup() - sched/numa: Fix is_core_idle() - sched: Fix UCLAMP_FLAG_IDLE setting - rcu: Fix to include first blocked task in stall warning - rcu: Add lockdep_assert_irqs_disabled() to rcu_sched_clock_irq() and callees - rcu: Fix stall-warning deadlock due to non-release of rcu_node ->lock - m68k: Fix invalid RMW_INSNS on CPUs that lack CAS - block: return ELEVATOR_DISCARD_MERGE if possible - spi: spi-fsl-dspi: Fix issue with uninitialized dma_slave_config - spi: spi-pic32: Fix issue with uninitialized dma_slave_config - genirq/timings: Fix error return code in irq_timings_test_irqs() - irqchip/loongson-pch-pic: Improve edge triggered interrupt support - lib/mpi: use kcalloc in mpi_resize - clocksource/drivers/sh_cmt: Fix wrong setting if don't request IRQ for clock source channel - spi: coldfire-qspi: Use clk_disable_unprepare in the remove function - irqchip/gic-v3: Fix priority comparison when non-secure priorities are used - crypto: qat - use proper type for vf_mask - certs: Trigger creation of RSA module signing key if it's not an RSA key - tpm: ibmvtpm: Avoid error message when
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
Sure! I cannot redeploy right now because I'm using the cloud to chase another bug, bug will do asap and report back. Thank you! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: Fix Committed Status in linux source package in Focal: Fix Committed Status in linux source package in Hirsute: Fix Committed Bug description: [Impact] bnx2x driver won't add all devices ports/interfaces. [Test case] Boot system with bnx2x device and verify all ports/interfaces have been added. [Potential regression] bnx2x devices won't be properly probed. Devices won't be added or SR-IOV won't be correctly supported. --- Original Description --- Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
Hey, Andre. As we talked, this is applied to 5.4 kernels as well, 5.4.0-90 should have it. Can you test that it fixes the problem? Thanks. Cascardo. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: Fix Committed Status in linux source package in Focal: Fix Committed Status in linux source package in Hirsute: Fix Committed Bug description: [Impact] bnx2x driver won't add all devices ports/interfaces. [Test case] Boot system with bnx2x device and verify all ports/interfaces have been added. [Potential regression] bnx2x devices won't be properly probed. Devices won't be added or SR-IOV won't be correctly supported. --- Original Description --- Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
This bug is awaiting verification that the linux/5.13.0-21.21 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-impish' to 'verification-done-impish'. If the problem still exists, change the tag 'verification-needed-impish' to 'verification-failed-impish'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: verification-needed-impish -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: Fix Committed Status in linux source package in Focal: Fix Committed Status in linux source package in Hirsute: Fix Committed Bug description: [Impact] bnx2x driver won't add all devices ports/interfaces. [Test case] Boot system with bnx2x device and verify all ports/interfaces have been added. [Potential regression] bnx2x devices won't be properly probed. Devices won't be added or SR-IOV won't be correctly supported. --- Original Description --- Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
This bug is awaiting verification that the linux/5.11.0-39.43 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-hirsute' to 'verification-done-hirsute'. If the problem still exists, change the tag 'verification-needed-hirsute' to 'verification-failed-hirsute'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: verification-needed-hirsute -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: Fix Committed Status in linux source package in Focal: Fix Committed Status in linux source package in Hirsute: Fix Committed Bug description: [Impact] bnx2x driver won't add all devices ports/interfaces. [Test case] Boot system with bnx2x device and verify all ports/interfaces have been added. [Potential regression] bnx2x devices won't be properly probed. Devices won't be added or SR-IOV won't be correctly supported. --- Original Description --- Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
** Changed in: linux (Ubuntu Bionic) Status: In Progress => Fix Committed ** Changed in: linux (Ubuntu Focal) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: Fix Committed Status in linux source package in Focal: Fix Committed Status in linux source package in Hirsute: Fix Committed Bug description: [Impact] bnx2x driver won't add all devices ports/interfaces. [Test case] Boot system with bnx2x device and verify all ports/interfaces have been added. [Potential regression] bnx2x devices won't be properly probed. Devices won't be added or SR-IOV won't be correctly supported. --- Original Description --- Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
** Changed in: linux (Ubuntu Hirsute) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: In Progress Status in linux source package in Focal: In Progress Status in linux source package in Hirsute: Fix Committed Bug description: [Impact] bnx2x driver won't add all devices ports/interfaces. [Test case] Boot system with bnx2x device and verify all ports/interfaces have been added. [Potential regression] bnx2x devices won't be properly probed. Devices won't be added or SR-IOV won't be correctly supported. --- Original Description --- Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
This bug is awaiting verification that the linux-hwe-5.8/5.8.0-66.74 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-focal' to 'verification-done-focal'. If the problem still exists, change the tag 'verification-needed-focal' to 'verification-failed-focal'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: verification-needed-focal -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: In Progress Status in linux source package in Focal: In Progress Status in linux source package in Hirsute: In Progress Bug description: [Impact] bnx2x driver won't add all devices ports/interfaces. [Test case] Boot system with bnx2x device and verify all ports/interfaces have been added. [Potential regression] bnx2x devices won't be properly probed. Devices won't be added or SR-IOV won't be correctly supported. --- Original Description --- Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
** Description changed: + [Impact] + bnx2x driver won't add all devices ports/interfaces. + + [Test case] + Boot system with bnx2x device and verify all ports/interfaces have been added. + + [Potential regression] + bnx2x devices won't be properly probed. Devices won't be added or SR-IOV won't be correctly supported. + + --- Original Description --- Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: In Progress Status in linux source package in Focal: In Progress Status in linux source package in Hirsute: In Progress Bug description: [Impact] bnx2x driver won't add all devices ports/interfaces. [Test case] Boot system with bnx2x device and verify all ports/interfaces have been added. [Potential regression] bnx2x devices won't be properly probed. Devices won't be added or SR-IOV won't be correctly supported. --- Original Description --- Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
[Impact] bnx2x driver won't add all devices ports/interfaces. [Test case] Boot system with bnx2x device and verify all ports/interfaces have been added. [Potential regression] bnx2x devices won't be properly probed. Devices won't be added or SR-IOV won't be correctly supported. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: In Progress Status in linux source package in Focal: In Progress Status in linux source package in Hirsute: In Progress Bug description: Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
** Changed in: linux (Ubuntu) Status: Incomplete => In Progress ** Changed in: linux (Ubuntu) Importance: Undecided => Medium ** Changed in: linux (Ubuntu) Assignee: (unassigned) => Thadeu Lima de Souza Cascardo (cascardo) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: In Progress Status in linux source package in Focal: In Progress Status in linux source package in Hirsute: In Progress Bug description: Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
** Changed in: linux (Ubuntu Bionic) Importance: Undecided => Medium ** Changed in: linux (Ubuntu Focal) Importance: Undecided => Medium ** Changed in: linux (Ubuntu Hirsute) Importance: Undecided => Medium ** Changed in: linux (Ubuntu Hirsute) Status: New => In Progress ** Changed in: linux (Ubuntu Focal) Status: New => In Progress ** Changed in: linux (Ubuntu Bionic) Status: New => In Progress ** Changed in: linux (Ubuntu Bionic) Assignee: (unassigned) => Thadeu Lima de Souza Cascardo (cascardo) ** Changed in: linux (Ubuntu Focal) Assignee: (unassigned) => Thadeu Lima de Souza Cascardo (cascardo) ** Changed in: linux (Ubuntu Hirsute) Assignee: (unassigned) => Thadeu Lima de Souza Cascardo (cascardo) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: Incomplete Status in linux source package in Bionic: In Progress Status in linux source package in Focal: In Progress Status in linux source package in Hirsute: In Progress Bug description: Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
** Also affects: linux (Ubuntu Bionic) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: Incomplete Status in linux source package in Bionic: New Status in linux source package in Focal: New Status in linux source package in Hirsute: New Bug description: Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
This seems to be the upstream bug: https://bugzilla.kernel.org/show_bug.cgi?id=214297 ** Bug watch added: Linux Kernel Bug Tracker #214297 https://bugzilla.kernel.org/show_bug.cgi?id=214297 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: Incomplete Status in linux source package in Bionic: New Status in linux source package in Focal: New Status in linux source package in Hirsute: New Bug description: Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1945707] Re: BCM57800 SRIOV bug causes interfaces to disappear
** Also affects: linux (Ubuntu Focal) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Hirsute) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1945707 Title: BCM57800 SRIOV bug causes interfaces to disappear Status in linux package in Ubuntu: Incomplete Status in linux source package in Bionic: New Status in linux source package in Focal: New Status in linux source package in Hirsute: New Bug description: Works with focal kernel 5.4.0-80 Broken with focal kernel 5.4.0-88 On a Dell R720 with the BCM57800 based 1/10 Gigabit Integrated Network cards Kernel 5.11.22-3 causes half of the network interfaces to disappear specifically the 1gb ports. Commands like "ip link show" and "dmesg" no longer show eno3 and eno4 nor any other interface name for these ports. I've read the note in the release notes and this does not appear to be a case of the interface changing names, the 3rd and 4th interface don't show up at all. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card. Commands like "ip link show" no longer show ports 3 and 4. "lspci" still shows four items. dmesg only shows the first two interfaces. This problem seems to be known upstream, and seems to be a regression. More information at https://bugzilla.proxmox.com/show_bug.cgi?id=3558 This is being seen at a customer during an openstack install. It would be appreciated if a workaround could be provided or the fix could be prioritized. Using standard Focal 20.04 LTS kernel (it installs ok with the working kernel then upgrades to the non-working one -- this is done through maas and is difficult to control). Tested other kernels like hwe-* and all seem to be affected too. Client does not want to disable SRIOV on whole card and also cannot disable only ports 3/4 (the bios will not allow it). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945707/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
