This bug was fixed in the package linux-raspi - 5.15.0-1004.4
---
linux-raspi (5.15.0-1004.4) jammy; urgency=medium
* jammy/linux-raspi: 5.15.0-1004.4 -proposed tracker (LP: #1965283)
* Packaging resync (LP: #1786013)
- [Packaging] update Ubuntu.md
* jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-03-16)
(LP: #1965308)
- ARM: dts: bcm2711-rpi-ds: Disable the BCM2835 STC
- Revert "drm/tc358762: Set the DRM_BRIDGE_OP_UPSTREAM_FIRST flag to
configure
DSI host"
- Revert "drm: Introduce DRM_BRIDGE_OP_UPSTREAM_FIRST to alter bridge init
order"
- drm/bridge: Introduce pre_enable_upstream_first to alter bridge init order
- drm/panel: Add prepare_upstream_first flag to drm_panel
- drm: Include drm_connector.h from drm_panel.h
- drm/tc358762: Set the pre_enable_upstream_first flag to configure DSI host
* jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-03-08)
(LP: #1964144)
- drm/vc4: hdmi: Make sure the device is powered with CEC
- overlays: rpi-poe(-plus): Fix parameters
- dtoverlays: fix overrides in vc4-kms-dpi-generic
- dtoverlays: add rgb565-padhi output to vc4-kms-dpi-generic
- media: i2c: imx219: Scale the pixel clock rate for the 640x480 mode
- drm/vc4: For DPI, MEDIA_BUS_FMT_RGB565_1X16 is mode 1, not 3.
- dtoverlays: Add additional mappings to vc4-kms-dpi-generic
- drm: Introduce DRM_BRIDGE_OP_UPSTREAM_FIRST to alter bridge init order
- drm/dsi: Document the meaning and spec references for MIPI_DSI_MODE_*
- drm/bridge: tc358762: Ignore EPROBE_DEFER when logging errors
- drm/tc358762: Set the DRM_BRIDGE_OP_UPSTREAM_FIRST flag to configure DSI
host
- drm/vc4: Rename bridge to out_bridge
- drm/vc4: Move DSI initialisation to encoder_mode_set.
- drm/vc4: Remove splitting the bridge chain from the driver.
- drm/vc4: Convert vc4_dsi to use atomic enable/disable/mode_set.
- drm/vc4: Convert vc4_dsi to using a bridge instead of encoder.
- drm/vc4: Remove entry to ULPS from vc4_dsi post_disable
- usb: xhci: add a quirk for Superspeed bulk OUT transfers on VL805
- dtoverlays: Correct link frequency for ov7251
- media: i2c: Add acpi support to ov7251
- media: i2c: Provide ov7251_check_hwcfg()
- media: i2c: Add ov7251_pll_configure()
- media: i2c: Add support for 19.2MHz clock to ov7251
- media: i2c: Add ov7251_detect_chip()
- media: i2c: Add pm_runtime support to ov7251
- media: i2c: Remove .s_power() from ov7251
- media: i2c: ov7251: Reinstate setting ov7251_global_init_setting
- media: i2c: ov7251: V4L2_CID_PIXEL_RATE is fixed
- media: i2c: ov7251: V4L2_CID_LINK_FREQUENCY is fixed
- media: i2c: ov7251: Initialise current_mode during probe
- media: i2c: ov7251: Add V4L2_CID_HBLANK control
- media: i2c: ov7251: Do not reset gain on mode change
- media: i2c: ov7251: Fix link_freq validation loop
- media: i2c: ov7251: Add get_selection for NATIVE_SIZE, CROP_BOUNDS,
CROP_DEFAULT
- media: i2c: ov7251: Set VTS instead of having full tables for FPS.
- media: i2c: ov7251: Limit exposure based on VTS
- media: i2c: ov7251: Separate modes from frame intervals
- media: i2c: ov7251: Add V4L2_CID_VBLANK
- media: i2c: ov7251: Switch from V4L2_CID_GAIN to V4L2_CID_ANALOGUE_GAIN
- dtoverlays: Switch ov7251 to using Media Controller by default
- Revert "drm/vc4: Fix interrupt masking for HVS5."
- Revert "drm/vc4: Correct interrupt enable bits on hvs4"
- Revert "drm/vc4: hvs: Create a shadow dlist"
- Revert "drm/vc4: plane: Use dlist offset instead of pointer"
- ARM: boot: dts: bcm2711: Fix HVS register range
- drm/vc4: hvs: Fix frame count register readout
- drm/vc4: hvs: Use pointer to HVS in HVS_READ and HVS_WRITE macros
- drm/vc4: hvs: Defer dlist slots deallocation
- ARM: dts: Add GPIO line names for downstream RPis
- overlays:fixes probing of Hifiberry DAC2 HD
- overlays: Overlays for WaveShare 2-Chan CAN FD HAT
- overlays: Add "drm" parameter to pitft35-resistive
- configs: Add CONFIG_TINYDRM_HX8357D=m
- usb: xhci: rework XHCI_VLI_SS_BULK_OUT_BUG quirk
- usb: xhci: expand the scope of XHCI_VLI_SS_BULK_OUT_BUG
- media/i2c: Add driver for Omnivision OV2311
- dtoverlays: Add overlay for Omnivision OV2311 image sensor
- defconfigs: Add OV2311 image sensor to Pi defconfigs
- staging/vc-sm-cma: Avoid log spamming on Pi0/1 over cache alias.
- staging: vc04_services: isp: Permit all sRGB colour spaces on ISP outputs
- drivers: staging: bcm2835-isp: Do not cleanup mmal vcsm buffer on
stop_streaming
- drm/vc4: Fix out of order frames during asynchronous page flips
- staging: vc04_services: codec: Add support for V4L2_PIX_FMT_RGBA32 format
- drm/vc4: hvs: Reset muxes at probe time
- drm/vc4: kms: Store channel in local variable
- drm/vc4: kms: Warn
