[kicad-users] curves router I was looking at the different autorouters on the kicads links
curves router I was looking at the different autorouters on the kicads links their was a wiki with a autorouter someone was routing that didn't route and reuse it found curves and streight lines and made squiggles to make groups of wires the same length. Is their anything new kicad might have for autorouting I used freeroute it works great for what I do. But I want to know more about autorouting tech.
Re: [kicad-users] kicad kicad-2010-03-14-svn-R2456-final-UBUNTU_9.10.tgz
Hello Andy. The install txt makes no mention of GLIBCXX_3.4.11 Oh, yes In an another forum ( http://www.debianforum.de (only german) i got the answer, that libstdc++6 4.3.2-1.1 (of debian lenny) contains only up to GLIBCXX_3.4.10. So i should test the libstdc++6 from the lenny-backports repository of squeeze (at http://packages.debian.org/libstdc++6 , put it into the sources list) But i doesn't work. But by reading this artikle again, i noticed, that i was urged to install libgcc1_4.4 and gcc-4.4-base also, when i use this package from testing/squeeze. And i forgot this. So i will test this at the weekend again. Judging from the various net postings, GLIBCXX_3.4.11 is causing all kinds of trouble. Probablly because it is not generally available and users don't know exactly what package they need. a bit of guidance as to what is needed would be welcome. Exactly this is the Problem. I hope, i can solve the problem about the weekend. And i think, the way to get this package would be similar in your suse, too. With best regards: Bernd Wiebus -- Sicherer, schneller und einfacher. Die aktuellen Internet-Browser - jetzt kostenlos herunterladen! http://portal.gmx.net/de/go/chbrowser
[kicad-users] linux problem
Hi , i'm sorry for my english , i have installed on Kubuntu 9.10 , Kicad work fine but EESCHEMA print very wrong , arcs are printed with constructions line , and resolution its very low , PCB print blank sheets. I have see then Kicad don't use CUP but one generic postscript driver. Other program print very well , i use same pc with XP and kicad print very well. Same problem with kicad version 2009 . Help. Best regards
Re: [kicad-users] linux problem
2010/3/24 mancapit manca...@yahoo.it Hi , i'm sorry for my english , i have installed on Kubuntu 9.10 , Kicad work fine but EESCHEMA print very wrong , arcs are printed with constructions line , and resolution its very low , PCB print blank sheets. I have see then Kicad don't use CUP but one generic postscript driver. Other program print very well , i use same pc with XP and kicad print very well. Same problem with kicad version 2009 . Help. Best regards Hello, For quality printing on Ubuntu, I use plot in Postcript then I print it with evince (Document viewer). HTH Danilo
Re: [kicad-users] linux problem
See to that you make PostScript plots. I installed a program calledps2pdf This creates very very nice PDF files in colour. Best Regards Dan Andersson/ M0DFI On Wednesday 24 March 2010 13:29:48 mancapit wrote: Hi , i'm sorry for my english , i have installed on Kubuntu 9.10 , Kicad work fine but EESCHEMA print very wrong , arcs are printed with constructions line , and resolution its very low , PCB print blank sheets. I have see then Kicad don't use CUP but one generic postscript driver. Other program print very well , i use same pc with XP and kicad print very well. Same problem with kicad version 2009 . Help. Best regards Please read the Kicad FAQ in the group files section before posting your question. Please post your bug reports here. They will be picked up by the creator of Kicad. Please visit http://www.kicadlib.org for details of how to contribute your symbols/modules to the kicad library. For building Kicad from source and other development questions visit the kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/kicad-users/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/kicad-users/join (Yahoo! ID required) * To change settings via email: kicad-users-dig...@yahoogroups.com kicad-users-fullfeatu...@yahoogroups.com * To unsubscribe from this group, send an email to: kicad-users-unsubscr...@yahoogroups.com * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[kicad-users] Re: linux problem
Thanks for the suggestion. Best regards --- In kicad-users@yahoogroups.com, Dan Andersson d...@... wrote: See to that you make PostScript plots. I installed a program calledps2pdf This creates very very nice PDF files in colour. Best Regards Dan Andersson/ M0DFI On Wednesday 24 March 2010 13:29:48 mancapit wrote: Hi , i'm sorry for my english , i have installed on Kubuntu 9.10 , Kicad work fine but EESCHEMA print very wrong , arcs are printed with constructions line , and resolution its very low , PCB print blank sheets. I have see then Kicad don't use CUP but one generic postscript driver. Other program print very well , i use same pc with XP and kicad print very well. Same problem with kicad version 2009 . Help. Best regards
[kicad-users] Re: linux problem
Hello Dan. I installed a program called ps2pdf I think ps2pdf is not a program, but a script for steering the program ghostscript. Also ghostscript has to be compiled in a way allowing to write pdf-files. Not all distributions support ps2pdf in their package repository or support the convertion of ps to pdf by ghostscript. Look: http://pages.cs.wisc.edu/~ghost/doc/AFPL/6.50/Ps2pdf.htm with best regards: Bernd Wiebus alias dl1eic
[kicad-users] Re: linux problem
Hi , i have't send a bug report. bye --- In kicad-users@yahoogroups.com, Alain Portal apor...@... wrote: Hi, Le Mercredi 24 Mars 2010 11:29:48, mancapit a écrit : Hi , i'm sorry for my english , i have installed on Kubuntu 9.10 , Kicad work fine but EESCHEMA print very wrong , arcs are printed with constructions line , and resolution its very low , PCB print blank sheets. I have see then Kicad don't use CUP but one generic postscript driver. Other program print very well , i use same pc with XP and kicad print very well. Same problem with kicad version 2009 . Help. Happy to see I'm not alone... I get the same problem when trying to print my board with pcbnew, printing on a printer or in a file, the result is useless: http://dionysos.fedorapeople.org/tmp/synchro.ps http://dionysos.fedorapeople.org/tmp/synchro.brd Do I have to report a bug for that? Regards, Alain -- La version française des pages de manuel Linux http://manpagesfr.free.fr -- La version française des pages de manuel Linux http://manpagesfr.free.fr
Re: [kicad-users] Re: linux problem
Bernd, I use an out of the box Ubuntu 9.10 and I have it installed automatically. As you note, the ps2pdf is a part of the ghostscript package. Both SuSE and Ubuntu have the package as well as my Asus laptop and eeePC laptop. I would say it's unusual to NOT have this available unless you run a really exotic distro... Regards Dan, M0DFI On Wednesday 24 March 2010 16:02:15 bernd.wiebus wrote: Hello Dan. I installed a program called ps2pdf I think ps2pdf is not a program, but a script for steering the program ghostscript. Also ghostscript has to be compiled in a way allowing to write pdf-files. Not all distributions support ps2pdf in their package repository or support the convertion of ps to pdf by ghostscript. Look: http://pages.cs.wisc.edu/~ghost/doc/AFPL/6.50/Ps2pdf.htm with best regards: Bernd Wiebus alias dl1eic Please read the Kicad FAQ in the group files section before posting your question. Please post your bug reports here. They will be picked up by the creator of Kicad. Please visit http://www.kicadlib.org for details of how to contribute your symbols/modules to the kicad library. For building Kicad from source and other development questions visit the kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/kicad-users/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/kicad-users/join (Yahoo! ID required) * To change settings via email: kicad-users-dig...@yahoogroups.com kicad-users-fullfeatu...@yahoogroups.com * To unsubscribe from this group, send an email to: kicad-users-unsubscr...@yahoogroups.com * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
