KR> Re:9

2011-09-26 Thread phillabaum...@aol.com 
Sexy-time right now!... 
http://spsp2.free.fr/sites.friend.php?dgoogleId=56a4

KR> Engine Failure on Take OFF.

2011-09-26 Thread Dan Heath 
Brian,  I am sure that you can if you want to.  However, I will bet that you
will spend more money and time than you would by putting on a Diehl gear.
And if you did make the mods, when would you have enough confidence in it?
Also, if your gear fails, how much money and time will you lose?

I believe this has been tried several times before, but I don't remember
seeing any at the KR Gathering.

See N64KR at http://KRBuilder.org - Then click on the pics 
See you at the 2011 - KR Gathering in Mt. Vernon, Il - MVN
There is a time for building and it never seems to end.
Daniel R. Heath - Lexington, SC


-Original Message-

can make mods on original retracts,to make them
safe, also a good flairing method or design?

KR> Engine Failure on Take OFF.

2011-09-26 Thread Brian Coss 
Hi again, can ground effect be benificial, as for absorbing landings?
Thx
On Sep 26, 2011 5:18 PM, "Tony King"  wrote:
> Glad to hear you're safe Phil. Hope you'll be back in the air soon.
>
> Cheers,
>
> Tony King
>
> On 26 September 2011 20:26, Phil Matheson wrote:
>
>> Well, it can happen to you.
>>
>> Last night 1730 at 500 ft Engine stopped dead. Lack of landing spots. Had
>> to
>> make 150' turn to safe ground.
>>
>> Check, tanks pumps NO start, but engine wind milling. A bit hot and ran
out
>> of field, had to lift over fence, then channel, stall, O S*#T - ground.
>> Bugger.
>>
>> Walked away. KR home in my workshop.
>>
>> Damage,
>> Prop, nose wheel collapse, L main collapse. Under inner wing whole from
>> wheel. But main leg undamaged, the main bolts Sheared OFF, as did the
nose
>> wheel to fire wall bolts. NO cowl damage only paint. Engine mount bent.
>>
>> FOUND the cause this morning, the coil lead came out of the distributor
>> Cap.
>> No wonder it would not start.
>> Did I seem Mark Jones make a cover or his dist. cap, Should listen to
Mark.
>>
>> Impact point Google Earth 145 32.527 E 35 39.681S only 400m from my home.
>>
>> Phil Matheson
>>
>> VH PKR. KR2.
>>
>>
>> ___
>> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
>> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
>> please see other KRnet info at http://www.krnet.org/info.html
>>
>>
>> ___
>> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
>> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
>> please see other KRnet info at http://www.krnet.org/info.html
>>
> ___
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html

KR> Engine Failure on Take OFF.

2011-09-26 Thread Barry Kruyssen 
Hi Phil

Sorry to hear about your accident.  

Regards
Barry Kruyssen
k...@bigpond.com 
http://athertonairport.com.au/kr2/ 


-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf
Of Phil Matheson
Sent: Monday, 26 September 2011 8:26 PM
To: 'KRnet'
Subject: KR> Engine Failure on Take OFF.

Well, it can happen to you.

Last night 1730 at 500 ft Engine stopped dead. Lack of landing spots. Had to
make 150' turn to safe ground.

Check, tanks pumps NO start, but engine wind milling. A bit hot and ran out
of field, had to lift over fence, then channel, stall, O S*#T - ground.
Bugger.

Walked away. KR home in my workshop.

Damage,
Prop, nose wheel collapse, L main collapse. Under inner wing whole from
wheel. But main leg undamaged, the main bolts Sheared OFF, as did the nose
wheel to fire wall bolts. NO cowl damage only paint. Engine mount bent.  

FOUND the cause this morning, the coil lead came out of the distributor Cap.
No wonder it would not start.
Did I seem Mark Jones make a cover or his dist. cap, Should listen to Mark.

Impact point Google Earth  145 32.527 E 35 39.681S only 400m from my home.

Phil Matheson

VH PKR.  KR2.


___
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html


___
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html

KR> Engine Failure on Take OFF.

2011-09-26 Thread Tony King 
Glad to hear you're safe Phil.  Hope you'll be back in the air soon.

Cheers,

Tony King

On 26 September 2011 20:26, Phil Matheson wrote:

> Well, it can happen to you.
>
> Last night 1730 at 500 ft Engine stopped dead. Lack of landing spots. Had
> to
> make 150' turn to safe ground.
>
> Check, tanks pumps NO start, but engine wind milling. A bit hot and ran out
> of field, had to lift over fence, then channel, stall, O S*#T - ground.
> Bugger.
>
> Walked away. KR home in my workshop.
>
> Damage,
> Prop, nose wheel collapse, L main collapse. Under inner wing whole from
> wheel. But main leg undamaged, the main bolts Sheared OFF, as did the nose
> wheel to fire wall bolts. NO cowl damage only paint. Engine mount bent.
>
> FOUND the cause this morning, the coil lead came out of the distributor
> Cap.
> No wonder it would not start.
> Did I seem Mark Jones make a cover or his dist. cap, Should listen to Mark.
>
> Impact point Google Earth  145 32.527 E 35 39.681S only 400m from my home.
>
> Phil Matheson
>
> VH PKR.  KR2.
>
>
> ___
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
>
> ___
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>

KR> Kr-2 Project For Sale

2011-09-26 Thread kr1pi...@aol.com 
To KR Knetters,

Health matters have dictated an end to my dream.. I have a KR-2 In canoe  
form with wing stubs attached and sitting on original KR retractable landing  
gear. Vertical and horizontal tail feathers are attached and front and rear 
wing  spars have been built but not attached.

I have the original nose cowling, canopy. Needs a turtle deck  built.

Along with the project I have (2) 66 110hp corvair engines to go along with 
 the project. (1) engine is in the tear down stage and the other is 
complete and  not been taken apart... I will sell the engines separate of the 
KR-2  
but I would like to sell the engines together.

I am not parting out pieces off the project so please don't ask.

Feel free to E-Mail Paul @  _Kr1pilot@aol.com_ (mailto:kr1pi...@aol.com) 

The project is located in Lakeland Florida..

Regards,

Paul

KR> Gathering pictures

2011-09-26 Thread Ed Janssen 
I've uploaded a few more pictures taken at the Gathering.

https://picasaweb.google.com/ejanssen3/KRGathering2011?authuser=0=Gv1sRgCImr1sSf1sDqDw=directlink

Ed Janssen

KR> Need a Nose wheel assy

2011-09-26 Thread Brian G Douglas 


Hi KR world.
  Help! I need a Diehl nose landing gear assy.  I would also like the wheel and 
tire and tube assy.  But the big thing that I need is the nose assy.  This is 
the last part that i need to finish my airplane before I get the DAR to 
inspect.  
  The assy that I have now is like the RV series and I can't get the shimmy out 
of it.

So If any one can help me please contact me off KR line.  I live in Killeen 
Texas and will entertain any offers

Thanks in advance

Brian G. Douglas
254-289-4298
bgd...@vvm.com

Had Kr2 N8575C
Now have a Bradly Aerobat N27BD

KR> Engine Failure on Take OFF.

2011-09-26 Thread Gavin Magill 
Glad to hear you are ok Phil.

Not good about your plane. Back to the workshop I guess.

Hopefully you didn't have too much explaining or paperwork to do for CASA.

Regards
Gavin


On 26 September 2011 23:26, Phil Matheson wrote:

> Well, it can happen to you.
>
> Last night 1730 at 500 ft Engine stopped dead. Lack of landing spots. Had
> to
> make 150' turn to safe ground.
>
> Check, tanks pumps NO start, but engine wind milling. A bit hot and ran out
> of field, had to lift over fence, then channel, stall, O S*#T - ground.
> Bugger.
>
> Walked away. KR home in my workshop.
>
> Damage,
> Prop, nose wheel collapse, L main collapse. Under inner wing whole from
> wheel. But main leg undamaged, the main bolts Sheared OFF, as did the nose
> wheel to fire wall bolts. NO cowl damage only paint. Engine mount bent.
>
> FOUND the cause this morning, the coil lead came out of the distributor
> Cap.
> No wonder it would not start.
> Did I seem Mark Jones make a cover or his dist. cap, Should listen to Mark.
>
> Impact point Google Earth  145 32.527 E 35 39.681S only 400m from my home.
>
> Phil Matheson
>
> VH PKR.  KR2.
>
>
> ___
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
>
> ___
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>

KR> Engine Failure on Take OFF.

2011-09-26 Thread Virgil N. Salisbury 

Good reason to lift the Cowl top during preflight, Virg


On 9/26/2011 10:22 AM, Brad Stone wrote:
> Hate to hear you buggered your plane but so glad your ok.
> Brad Stone
> KR2S
> "Sky Pig"
> Madison, Ms.
>
> From: Phil Matheson
> To: 'KRnet'
> Sent: Monday, September 26, 2011 5:26 AM
> Subject: KR>  Engine Failure on Take OFF.
>
> Well, it can happen to you.
>
> Last night 1730 at 500 ft Engine stopped dead. Lack of landing spots. Had to
> make 150' turn to safe ground.
>
> Check, tanks pumps NO start, but engine wind milling. A bit hot and ran out
> of field, had to lift over fence, then channel, stall, O S*#T - ground.
> Bugger.
>
> Walked away. KR home in my workshop.
>
> Damage,
> Prop, nose wheel collapse, L main collapse. Under inner wing whole from
> wheel. But main leg undamaged, the main bolts Sheared OFF, as did the nose
> wheel to fire wall bolts. NO cowl damage only paint. Engine mount bent.
>
> FOUND the cause this morning, the coil lead came out of the distributor Cap.
> No wonder it would not start.
> Did I seem Mark Jones make a cover or his dist. cap, Should listen to Mark.
>
> Impact point Google Earth  145 32.527 E 35 39.681S only 400m from my home.
>
> Phil Matheson
>
> VH PKR.  KR2.
>

KR> Engine Failure on Take OFF.

2011-09-26 Thread Brad Stone 
Hate to hear you buggered your plane but so glad your ok.
Brad Stone
KR2S
"Sky Pig"
Madison, Ms.

From: Phil Matheson 
To: 'KRnet' 
Sent: Monday, September 26, 2011 5:26 AM
Subject: KR> Engine Failure on Take OFF.

Well, it can happen to you.

Last night 1730 at 500 ft Engine stopped dead. Lack of landing spots. Had to
make 150' turn to safe ground.

Check, tanks pumps NO start, but engine wind milling. A bit hot and ran out
of field, had to lift over fence, then channel, stall, O S*#T - ground.
Bugger.

Walked away. KR home in my workshop.

Damage,
Prop, nose wheel collapse, L main collapse. Under inner wing whole from
wheel. But main leg undamaged, the main bolts Sheared OFF, as did the nose
wheel to fire wall bolts. NO cowl damage only paint. Engine mount bent.  

FOUND the cause this morning, the coil lead came out of the distributor Cap.
No wonder it would not start.
Did I seem Mark Jones make a cover or his dist. cap, Should listen to Mark.

Impact point Google Earth  145 32.527 E 35 39.681S only 400m from my home.

Phil Matheson

VH PKR.  KR2.


___
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html


___
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html

KR> Engine Failure on Take OFF.

2011-09-26 Thread Eric j Pitts 
Glad you are OK, the plane can be fixed.

On Mon, Sep 26, 2011 at 6:26 AM, Phil Matheson
wrote:

> Well, it can happen to you.
>


>
> Eric Pitts
> Terre Haute, Indiana
> HTTP://eric.pitts.mystarband.net/KR2S.html


"Life should NOT be a  journey to the grave with the  intention of arriving
safely in an attractive and well preserved body, but  rather to skid in
sideways, chocolate in one hand, body thoroughly used up, totally worn  out
and screaming "WOO HOO what a ride!"

KR> Engine Failure on Take OFF.

2011-09-26 Thread Phil Matheson 
Well, it can happen to you.

Last night 1730 at 500 ft Engine stopped dead. Lack of landing spots. Had to
make 150' turn to safe ground.

Check, tanks pumps NO start, but engine wind milling. A bit hot and ran out
of field, had to lift over fence, then channel, stall, O S*#T - ground.
Bugger.

Walked away. KR home in my workshop.

Damage,
Prop, nose wheel collapse, L main collapse. Under inner wing whole from
wheel. But main leg undamaged, the main bolts Sheared OFF, as did the nose
wheel to fire wall bolts. NO cowl damage only paint. Engine mount bent.  

FOUND the cause this morning, the coil lead came out of the distributor Cap.
No wonder it would not start.
Did I seem Mark Jones make a cover or his dist. cap, Should listen to Mark.

Impact point Google Earth  145 32.527 E 35 39.681S only 400m from my home.

Phil Matheson

VH PKR.  KR2.


___
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html

KR> New Pics - Stress analysis

2011-09-26 Thread Mike 
Hi Peter
Mike Whittaker (MW designer) has done stress analysis for several LAA
members in the UK. His contact details are on the MW website
http://www.mwclub.org/?page_id=82 
Regards
Mike Mold

-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf
Of Peter Drake
Sent: 25 September 2011 12:11
To: KRnet
Subject: KR> New Pics

Hi All

I have just updated my website with a few more pics.
We are using an Emeraude canopy for extra headroom. But I had to modify the
turtle deck to give it a more organic shape.
Used Mark L's method for making tail access cover, worked a treat!

I am still getting nowhere with obtaining some stress analysis calcs on the
fire wall for using this Jabiru 3300 we have bought. No reply from Bill
Marcy or his charity.

60% etc.

Peter Drake
Hereford UK

www.peterskr2s.co.uk


--
I am using the free version of SPAMfighter.
We are a community of 7 million users fighting spam.
SPAMfighter has removed 930 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len

The Professional version does not have this message
___
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html
-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1410 / Virus Database: 1520/3918 - Release Date: 09/25/11