KR> capacitance fuel level sender?

[Jeff Scott]

It looks like the same thing as the Westach capacitance probe which is what 
I've got in my KR. ?It has 5 holes for 3/16 screws and should come with a 
square mounting plate and gasket. ?You bond the aluminum plate to the side of 
the fuel tank where you want to mount the probe. ?The probe goes through a hole 
in the center of the plate and the base mounts to the flange using 5 3/16 
screws or bolts. ?I had problems with them weeping under the mounting gaskets 
off and on until I finally sealed the gaskets with some west epoxy. ?If you 
have an aluminum tank, you could weld or rivet the aluminum mounting flange to 
the tank. ?The picture at 
 shows the 
mounting flange (even though that particular unit is the older 12V version of 
the probe).

-Jeff Scott
Los Alamos, NM



> - Original Message -
> From: Mark Langford
> Sent: 07/19/13 06:12 PM
> To: KRnet
> Subject: KR> capacitance fuel level sender?
> 
> KRNetHeads,
> 
> I've finally finished up front-hinging the canopy (I'll work up a web page 
> over the weekend), and next on the list is adding a fuel level sender to 
> N891JF. I have a VDO 226-007 resistive sender, but am considering a 
> capacitance sensor as well. MGL sells one near the bottom of 
> http://www.mglavionics.com/html/infinity.html described as "Capacitance Fuel 
> Level Sender, Bendable, Cutable" . Is anybody familiar with this particular 
> unit, and might know the thread size or other mounting details? I have a call 
> in to MGL but have not heard back yet. I'm using an RDAC XF interface, and I 
> think either of these two would work, but am checking my options.
> 
> Thanks a lot,
> 
> Mark Langford
> ML at N56ML.com
> website at http://www.N56ML.com 
> 
> 
> ___
> Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
> To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
> please see other KRnet info at http://www.krnet.org/info.html
> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
> options

KR> Soapbox about furloughs

[jon kimmel]

Here I am sitting at home on furlough...which I take as a breech of
contract.  I enjoy having an extra day of leave to work on my flaps, but I
can't help feeling violated.  I am not allowed to campaign, but I think
every member of congress should be voted out at the next election for
allowing this to happen...regardless of how they voted.  They simply didn't
do their job...but they still get paid.

https://sites.google.com/site/mykr2stretch/
https://sites.google.com/site/mykr2stretch/parts-for-sale

KR> Soapbox about furloughs

[Craig Williams]

Jon

The lesson here is Don't trust the Govt.? I know how you feel about being 
betrayed.? That's how I feel about my free military health care for life if I 
gave them 20 years.? Now I pay.? Who do I sue?? 

Now for KR stuff.

I added AC and a ceiling fan to my garage this week so I can do layups while 
its 97 deg outside.

Craig
USAF Ret





 From: jon kimmel 
To: KRnet  
Sent: Friday, July 19, 2013 9:41 AM
Subject: KR> Soapbox about furloughs


Here I am sitting at home on furlough...which I take as a breech of
contract.? I enjoy having an extra day of leave to work on my flaps, but I
can't help feeling violated.? I am not allowed to campaign, but I think
every member of congress should be voted out at the next election for
allowing this to happen...regardless of how they voted.? They simply didn't
do their job...but they still get paid.

https://sites.google.com/site/mykr2stretch/
https://sites.google.com/site/mykr2stretch/parts-for-sale
___
Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
please see other KRnet info at http://www.krnet.org/info.html
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
options