KR> RE: KR Canadian Bingelis etal/Eaa books
RE: KR> Canadian Bingelis etal/Eaa books To all Canadian KR people and other lurkers like me, whenever you order books from EAA be sure to have them shipped by USpost as they (EAA) usually use Purlator or some other type and you will be faced with an additional 'brokerage fee'. I ordered their Christmas special of the 3 book Bingelis Special several years ago and was faced with an additional $38 brokerage fee - not nice!. I phoned EAA about it and got no satisfaction and wonder if their shipping rules still apply. ( I/we now have a US drop box that is only 60 miles away for USA purchases - eliminating high delivery charges etc) Gary Canada -Original Message- From: Larry Flesner Sent: Fri, 02 December 2011 14:18:29 To: KRnet Subject: RE: KR> Instrument panel wire When in doubt, consult your Tony Bingelis book with the chart of amp loads and wire size needed, in a bundle or open air. Everyone building should have all of Tony's books, especially his first three. "..Larry Flesner ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> RE: Glenda McElwee email to KR list
RE: Glenda McElwee email to KR list I received an email on the KR list yesterday afternoon supposedly from Glenda. I saw a number of folks on the KR list attached to it as well (Joe Horton etc) and believed it to be OK. When I opened, what looked like a photo album, I was puked op with a number of Trojan viruses. It was a good thing I had a good anti-virus system in place. Did anyone on the KR list get it too, and if so has anyone investigated the root of the viruses and who sent them? I'm sure Glenda didn't, maybe someone she pissed off raided her name and dropped a the bomb . I won't open an attachment on the list for awhile, unless I verify it somehow. Gary- Canada
KR> Re: KR Sun 'N Fun Hammered by Storms
Re: KR> Sun 'N Fun Hammered by Storms I am writing this from my room just outside of Sun n Fun (Plant City) and drove by the airport about an hour ago and it is wet! Trees are pulled out and in the airport site two guys who were back at the motel told of 5 or six planes got flipped into others as well as tents going down. A Caravan flipped over...that's big! I am going to try tomorrow if it isn't too swampy and if the weather is good it should be a big day...see some of you there! Gary-Canada Lots of large thunderstorms, Though Friday-Sunday is expected to be nice and sunny and NO rain. Sorry for anyone that has lost thier plane, my projects are like other children, I would hate to lose one like that. I'm guessing this has kept alot of people from making it down. I bet Friday and Sat are going to be real BIG! Joe On Thu, Mar 31, 2011 at 2:10 PM, John Bouyea wrote: > Im sending a wish, hope & prayer that everyone at S is ok. Many > aircraft > are damaged by the storms passing through the area today. > > > > If you hear from anyone, the list subscribers would appreciate an update > from Florida. > > > > Be safe everyone! > > > > John Bouyea > > > > > > ___ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > -- Jose Fuentes Founding Father (one of and former Vice Prez) of Capital City.NET User's Group Former Microsoft MVP http://blogs.aspadvice.com/jfuentes ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> RE: KRTrailer length and width
RE: KR>Trailer length and width Hey guys I am going to trailer a KR2 and need to know the size of an enclosed trailer to do the job. The bird has to be outside for awhile. What is the length and width the internals need to be to accept the KR? And the height? (wings are off) I'm thinking 8' wide x 15' long x 4' high? (w/o engine) Any easy trailer tips as I might convert my boat trailer? Gary
KR> RE: KR Gathering Pre-Registration
RE: KR> Gathering Pre-Registration How many days 'till the 2011 Gathering Mark? Gary -Original Message- From: Mark Jones Sent: Wed, 15 December 2010 20:05:11 To: KR Net Subject: KR> Gathering Pre-Registration Pre-Registration for the 2011 Gathering is open. Go to this link and click on Pre-registration on the left side of the page. http://krgathering.org/ Mark Jones (N886MJ) Stevens Point, WI E-mail: flyk...@charter.net Web: www.flykr2s.com ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> Re: KR GAN pulse of aviation
Re: KR> GAN pulse of aviation Wicks today, was asking for support for GAN and I was perusing around and found these gems from Sportys new 'T' shirt logos: It only takes two things to fly: Airspeed and Money is the message of one shirt. Another charts the four forces of flight, which are dreams (up), reality (down), money (forward) and the FAA (backward). A third shirt explains the FAA mission, which is Were not happy until youre not happy. Then theres the dictionary definition of pilot which is the highest form of life on earth. Gary Canada Merry Christmas all! -Original Message- From: Larry Flesner Sent: Wed, 23 December 2009 01:30:26 To: KRnet Subject: Re: KR> Tail wheel/rudder interconnection > I don't have any >close up photos. In the photo at >http://mysite.verizon.net/flesner/lf103.jpg you can see it is a very >standard installation. >Larry Flesner >+++ I forgot to mention the one thing I did differently then most builders do. I attached the tail wheel cable to the rudder cable inside the fuselage and they exit the fuselage through different fair leads. I did this so the "pull angle" of the tail wheel cable is in line with the rudder cable and does not pull the rudder cable at an angle when rudder pressure is applied. Most set ups have the cables connected outside the fuselage and, with the tail wheel on the ground and full rudder peddle deflection, you could be stressing your rudder stop if it is located at the rudder and not on the peddles themselves. Any side loads on my tail wheel, when not running in line with the aircraft, are transferred in a straight line to my peddles and not pulling the rudder cable at an angle causing additional rudder deflection. Clear as mud, right?? Larry Flesner ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> RE: KR Longest time?
RE: KR> Longest time? Got the EAA newsletter tonight and wondered what kr has the most flying hours and will Mark Langford's 1000 hours be a milestone? EAA is compiling a list of 'high milage' homebuilts and maybe the KR's can make the list. Gary
KR> RE: KR New Kiwi web site
RE: KR> New Kiwi web site I know you Kiwi's are on a different time zone but Gavin's last fuselage statement was August 31, 2009! I know it took him a long time to build the fuse his way but working in the future sure must help!!-lol- Gary (still August 11, 2009) -Original Message- From: Darren Crompton Sent: Tue, 11 August 2009 13:44:59 To: KRnet Subject: KR> New Kiwi web site New Zealander, Gavin Magill has a new web site to document his KR2S build. http://www.kiwikr.co.nz/index.html Happy building Gavin. -- Darren Crompton AUSTRALIA My web site: www.kr-2s.com ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> RE: OSH weather
RE: OSH weather Mark Jones et al What is the weather forcast for Monday at Osh? ...and longer. Hope to land there sometime Monday Gary - Canada
KR> Re: KR KR2 for sale by Lee Van Dyke
Re: KR> KR2 for sale by Lee Van Dyke It is in the original message border:(doesn't show on your message though) l...@vandyke5.com -Original Message- From: rdrace...@aol.com Sent: Wed, 04 February 2009 22:44:48 To: kr...@mylist.net Subject: Re: KR> KR2 for sale by Lee Van Dyke Lee, I live in the Seattle area and would be interested in both seeing pictures, and seeing the airplane in person. I would have emailed you off line, but you didn't put your email address in your email. Todd Thelin rdrace...@aol.com -Original Message- From: Lee Van Dyke To: KRnet Sent: Wed, 4 Feb 2009 6:20 pm Subject: KR> KR2 for sale Netters, I have been working on a KR2 that is for sale. Not my Snakebite. The original owner is in AZ he sold it to a guy in WA who had a nose gear failure, and it flipped. We are about done with all of the repairs. I have photos to send to anyone off line. It is a KR2 2100 revmaster, trike, with a new Todd's canopy. all of the other goodies that you may want. Starting price will be 12,000. It is a good built KR2 Lee Van Dyke ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> Ebay junk plans
Ebay junk plans I noticed some plans were written in Russian! Especially the propeller making plans - that ought to be fun! I guess we'll get Langford to translate or get Jones to get Langford to translate. That sunset was taken in Moscow - right? Is it Friday yet? From all the junk on the Krnet this week it must have been Friday all week! -lol- Gary -Original Message- From: Tony King Subject: Re: KR> Re: KR2 Plans/Drawings on ebay Just in case anyone is tempted, I just took a look at the site Bobby mentioned and downloaded one of the files (claiming to be a manual for a Falco). It was a .rar file (a form of zip file) containing an executable - not a pdf or a drawing or a Word file.
KR> Re: KR O-200 in Barnstormers.
Re: KR> O-200 in Barnstormers. Greg Dart resides near Lake Erie and is just next to Penn near Chattaqua Lake (nice country) NW NY State. He has a small airstrip and has owned a Vj22 Volmer and has a Cub ( last I heard) He is a knowlegeable guy and would have the info. As always 'caveat emptor' Hey this is from a Canadian who loves this part of your country and hope to travel more and see a lot of the rest. Gary -Original Message- From: Jeff Scott Subject: Re: KR> O-200 in Barnstormers. Reread the my previous post. I ran across this ad on barnstormers.com and know nothing about it beyond what's in the ad. It is located somewhere in NY. An O-200 Continental is nominally 100 HP. I would suggest having the owner scan the last few years of logs and all of the overhaul information as well as sending a few pictures if it piques your interest. Jeff Scott Los Alamos, NM
KR> KR2S for sale and props
Contact magazine #77 had an ad for a KR2S project - I don't know if it has been sold yet. Also a 3100cc - Big Boy Corvair and a Subaru 2.2L new 'crate' engine with new RFI direct drive and ground adjustable prop ( Richard Allen Email: r...@snowcrest.net ) . Also in 'Contact' is a propeller 'story/discussion' by Paul Lipps (Elippse Propeller) that might change some of your thinking about propellers. This is not an ad for Contact; just noting another information source Gary