KR> EIS Thermocouple Wiring
I've done alot of wiring of small pins for the lighting system on a friends plane and found that the best thing is always to solder the pin connections no matter how good you think the crimp is. With a good iron it takes only moments to do and will keep the wires in place. If you are using a DB25 connector (looks like a computer cable) those come as a unit which you solder together and then screw on the strain relief w/o crimping. GT > How can I get the CHT and EGT wires crimped to the 25-pin connector pin for > the GRT EIS 4000? ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> EIS Thermocouple Wiring
If the thermocouples are like the ones from Westach, with the little male pin on the end. Get some of the female pins and make you a connector with whatever size wire you like and run that wire into the 25-pin connector. Westach can supply the female pin ends. This is very easy to do. See N64KR at http://KRBuilder.org - Then click on the pics See you at the 2011 - KR Gathering in Mt. Vernon, Il - MVN There is a time for building and it never seems to end. Daniel R. Heath - Lexington, SC -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Glenn Martin Sent: Monday, October 03, 2011 9:35 PM To: KRnet Subject: Re: KR> EIS Thermocouple Wiring On 10/3/2011 4:50 PM, smwood wrote: > How can I get the CHT and EGT wires crimped to the 25-pin connector pin for > the GRT EIS 4000?
KR> EIS Thermocouple Wiring
On 10/3/2011 4:50 PM, smwood wrote: > How can I get the CHT and EGT wires crimped to the 25-pin connector pin for > the GRT EIS 4000? I have the 4-point ratchet crimper for these pins. The > hard thermocouple wires (Iron and Constantine?) apparently will not deform > enough to get a reliable crimp. The crimped pin falls off with the > slightest wiggle, much less a NASA pull test. Copper wire crimping works > every. GRT tech support are no help. > > Sid Wood > Tri-gear KR-2 N6242 > Mechanicsville, MD, USA > smw...@md.metrocast.net > > > > ___ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > Time consuming but..perhaps mix some short copper strands in with the EGT wires, which should crush into the EGT wires when you crimp it. I cant guarantee it, but it would be something I would try. I assume the EGT wire will not solder? -- Glenn Martin, KR2 N1333A Biloxi, MS
KR> EIS Thermocouple Wiring
How can I get the CHT and EGT wires crimped to the 25-pin connector pin for the GRT EIS 4000? I have the 4-point ratchet crimper for these pins. The hard thermocouple wires (Iron and Constantine?) apparently will not deform enough to get a reliable crimp. The crimped pin falls off with the slightest wiggle, much less a NASA pull test. Copper wire crimping works every. GRT tech support are no help. Sid Wood Tri-gear KR-2 N6242 Mechanicsville, MD, USA smw...@md.metrocast.net