KR> Ray Allen trim

[Jeff Scott]

?
?
?
>Can someone direct me to a thread about using the Ray Allen trim
>systems on a kr2. I am new to figuring out this whole krnet thing.
>
?


Lots of photos of installing the Ray Allen trim in both my KR and my SuperCub.

-Jeff Scott
Los Alamos, NM

KR> Ray Allen trim

[codylee.cramer]

Thank you Larry!

Sent from my T-Mobile 4G LTE Device
 Original message From: Larry Flesner via KRnet  Date: 5/12/16  7:52 PM  (GMT-05:00) To: KRnet  Cc: Larry Flesner  Subject: KR> Ray 
Allen trim 
At 05:41 PM 5/12/2016, you wrote:
>Can someone direct me to a thread about using the Ray Allen trim 
>systems on a kr2. I am new to figuring out this whole krnet thing.
>
+++

Here are 4000 words worth of thread.

Larry Flesner

https://dl.dropboxusercontent.com/u/32133949/IMG_8615.JPG
https://dl.dropboxusercontent.com/u/32133949/IMG_8613.JPG
https://dl.dropboxusercontent.com/u/32133949/IMG_8612.JPG
https://dl.dropboxusercontent.com/u/32133949/IMG_8611.JPG 


___
Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
please see other KRnet info at http://www.krnet.org/info.html
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
options

KR> Ray Allen trim

[Larry Flesner]

At 05:41 PM 5/12/2016, you wrote:
>Can someone direct me to a thread about using the Ray Allen trim 
>systems on a kr2. I am new to figuring out this whole krnet thing.
>
+++

Here are 4000 words worth of thread.

Larry Flesner

https://dl.dropboxusercontent.com/u/32133949/IMG_8615.JPG
https://dl.dropboxusercontent.com/u/32133949/IMG_8613.JPG
https://dl.dropboxusercontent.com/u/32133949/IMG_8612.JPG
https://dl.dropboxusercontent.com/u/32133949/IMG_8611.JPG 

KR> Ray Allen Trim System - Maintenace tip

[rahu...@peoplepc.com]

OK I asked the following:
> Has anyone had any operational problems with their Ray-Allen (MAC) 
> elevator trim? Now the elevator trim is acting up - works fine on the 
> ground including run up, but refuses to work in the air. Any body have any 
> suggestions?

Just so you will know if you experience the same in the future - check your 
grounds - clean them and make sure they are tight - I did and now it works 
as good as before!

Rick Human
N202RH
Houston, Texas 

KR> Ray Allen Trim System

[Larry Flesner]

At 12:58 PM 10/12/2008, you wrote:
>Has anyone had any operational problems with their
>Rick Human
+++


My Ray-Allen (MAC) elevator trim assembly is still working fine at 340 hours.
The indicator LED assembly went out early on and I never bothered to get
it repaired as I never referenced it and it was located in a hard to see area
anyway.  Later the servo unit was inop with blown fuses.  I cut the power
wire to the LED assembly and that fixed the problem.

Larry Flesner

KR> Ray Allen Trim System

[rahu...@peoplepc.com]

Has anyone had any operational problems with their Ray-Allen (MAC) elevator 
trim? Seems like with just at 100 hours things are starting to give up the 
ghost on N202RH. First to go was the pressure switch on my Hobbs meter. Now 
the elevator trim is acting up - works fine on the ground including run up, 
but refuses to work in the air. Any body have any suggestions?

Tried to post this earlier today - but I don't think it went through - If 
you see it twice, you have my apology!

Rick Human
N202RH
Houston, Texas