KR> sorry about the subject info needed

[mfreeman2 at indy.rr.com]

In case anyone else is in need of type 4 parts, I have a clean case, new stock 
pistons with rings, connecting rods and cylinders and some miscellaneous parts. 
I'm not sure if I still have a good stock crankshaft, would have to look and 
see. 
 "Randy Moore Newbern Tn. N318RM"  wrote: 
> 
> thanks, for all the info.
> 
> Randy Moore
> newbern tn
> N318RM
> KR rebuild
> 
> 
> -Original Message-
> From: Lawrence Bell 
> To: KRnet 
> Sent: Sun, Mar 2, 2014 11:28 am
> Subject: Re: KR> sorry about the subject info needed
> 
> 
> Randy,
> You get type 4 hub and bearings from Great Plains Aircraft supply co under
> type 1 parts. It is called a force 1 prop hub and bearing. The Great Plains
> web site is on the KR net Internet List. I have some type 4 engine basic
> parts,such as case, crank, oil pump. I think Great Plains still has some of
> the other parts for type 4. It gets a lot more expensive than a type 1. I
> gave up and am using a type 1.
> Larry Bell
> 
> 
> On Sat, Mar 1, 2014 at 7:30 PM, Randy Moore Newbern Tn. N318RM <
> no1son38 at aol.com> wrote:
> 
> >
> >
> >
> >
> > -Original Message-
> > From: Randy Moore Newbern Tn. N318RM 
> > To: krnet 
> > Sent: Sat, Mar 1, 2014 9:27 pm
> > Subject: KR> (no subject)
> >
> >
> >
> > __I am in need of some info. where can I get a prop hub and a fourth
> > bearing for
> > a type 4 engine?
> >
> > Randy Moore
> > newbern tn
> > 731 589 1330
> > N318RM
> 
> 
>  
> ___
> Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
> To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
> please see other KRnet info at http://www.krnet.org/info.html
> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
> options

KR> sorry about the subject info needed

[Jeff Scott]

Force 1 hub from Steve Bennett at Great Plains.

http://www.greatplainsas.com/scphub.html

> - Original Message - 
> 
> __I am in need of some info. where can I get a prop hub and a fourth bearing 
> for 
> a type 4 engine?
> 
> Randy Moore
> newbern tn
> 731 589 1330
> N318RM

KR> sorry about the subject info needed

[Randy Moore Newbern Tn. N318RM]

-Original Message-
From: Randy Moore Newbern Tn. N318RM 
To: krnet 
Sent: Sat, Mar 1, 2014 9:27 pm
Subject: KR> (no subject)



__I am in need of some info. where can I get a prop hub and a fourth bearing 
for 
a type 4 engine?

Randy Moore
newbern tn
731 589 1330
N318RM














__Do THIS before eating 
carbs every time1 EASY tip to increase fat-burning, lower blood sugar 
& decrease fat 
storagehttp://thirdpartyoffers.juno.com/TGL3141/530e6557d5de36557373est03vuc___Search
 
the KRnet Archives at http://tugantek.com/archmailv2-kr/search.To UNsubscribe 
from KRnet, send a message to KRnet-leave at list.krnet.orgplease see other 
KRnet 
info at http://www.krnet.org/info.htmlsee 
http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org 
to change options
___
Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
please see other KRnet info at http://www.krnet.org/info.html
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
options

KR> sorry about the pic site here is the web siteRE kr2 s for sale

[Ron Kraj]

facebook won't let me play...


On Thu, May 30, 2013 at 11:55 AM, warron gray  wrote:

> If you can't get into thesite send me your email and when I get home
> tonight I
> wil send you the pictures directly. sorry hate Face  Book
>
>
>
>
> 
> From: warron gray 
> To: krnet at list.krnet.org
> Sent: Thu, May 30, 2013 11:07:58 AM
> Subject: KR> sorry about the pic site here is the web siteRE kr2 s for sale
>
> sorry about the wrong site here is the correct web address
>
> https://www.facebook.com/media/set/?set=a.1679418956705.89529.1574462713=3
> ___
> Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
> To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
> please see other KRnet info at http://www.krnet.org/info.html
> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
> options
> ___
> Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
> To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
> please see other KRnet info at http://www.krnet.org/info.html
> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
> options
>

KR> sorry about the pic site here is the web siteRE kr2 s for sale

[warron gray]

sorry about the wrong site here is the correct web address
https://www.facebook.com/media/set/?set=a.1679418956705.89529.1574462713=3

KR> Sorry for the trouble

[Dan Heath]

I have been running on Windstream for years and no blocking here.

See N64KR at http://KRBuilder.org - Then click on the pics 
See you at the 2012 - KR Gathering in Mt. Vernon, Il – MVN – 40th
Anniversary
There is a time for building and it is over.
Daniel R. Heath - Lexington, SC



-Original Message-

Sorry folks, I ran through 6 email accounts trying to figure out who wouldnt
block KRNET, and yahoo free email appears to be the only one that wont

KR> Sorry for the trouble

[LG McCaw]

Glenn,

You might let Mark know the names of the other email providers. It
sounds like the KRNet may have been added to some blacklists. He'll have to
track'em down and request to be removed.  They'll test his system to make
sure it's not a relay or spambot or whatever and remove it. It's a pain in
the butt, I have to do it constantly for several of my customers. It usually
happens when people are too lazy to ask to be removed, so they just report
it as spam to their ISP's 

Take care,
L.G.



-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf
Of Glenn Martin
Sent: Saturday, January 07, 2012 2:22 PM
To: K Rnet
Subject: KR> Sorry for the trouble

Sorry folks, I ran through 6 email accounts trying to figure out who wouldnt
block KRNET, and yahoo free email appears to be the only one that wont. This
feels more and more like I'm living in communist CHINA than the USA.

 
Glenn Martin
KR2 N1333A
Biloxi, MS

___
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please
see other KRnet info at http://www.krnet.org/info.html

KR> Sorry for the trouble

[Glenn Martin]

Sorry folks, I ran through 6 email accounts trying to figure out who wouldnt 
block KRNET, and yahoo free email appears to be the only one that wont. This 
feels more and more like I'm living in communist CHINA than the USA.

 
Glenn Martin
KR2 N1333A
Biloxi, MS

KR> Sorry

[Michael Swierk]

Hi Eric,
  My name is Mike Swierk and I live Oxford, Indiana was wondering if I could 
get together with you one day and check out your KR? I have been interested in 
a while and maybe looking to pick up a project or start fresh. They seem to be 
a great little machine from what I have been reading for a while and checking 
out all the builders sites.
 Thanks Mike 

--- On Fri, 10/8/10, Eric j Pitts <eric.pi...@starband.net> wrote:


From: Eric j Pitts <eric.pi...@starband.net>
Subject: KR> Sorry
To: kr...@mylist.net
List-Post: krnet@list.krnet.org
Date: Friday, October 8, 2010, 7:10 PM


Sorry for all the crap attached to the last message.

-- 
Eric Pitts
Terre Haute, Indiana
HTTP://eric.pitts.mystarband.net/KR2S.html<http://eric.pitts.mystarband.net/KR2S.html>

"Life should NOT be a  journey to the grave with the  intention of arriving
safely in an attractive and well preserved body, but  rather to skid in
sideways, chocolate in one hand, body thoroughly used up, totally worn  out
and screaming "WOO HOO what a ride!"
___
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html

KR> Sorry

[Eric j Pitts]

Sorry for all the crap attached to the last message.

-- 
Eric Pitts
Terre Haute, Indiana
HTTP://eric.pitts.mystarband.net/KR2S.html

"Life should NOT be a  journey to the grave with the  intention of arriving
safely in an attractive and well preserved body, but  rather to skid in
sideways, chocolate in one hand, body thoroughly used up, totally worn  out
and screaming "WOO HOO what a ride!"

KR> Sorry for Goofing up last nights digest

[JR Freiberger]

Hey guys I realized that I really made a mess of last nights mail. My 
appologies... And thank you to those that provided the info are KR's in 
Indiana.
Jim Freiberger 

KR> Sorry

[Charlie Morehead]

Netters
 
Sorry about my last post, it should have gone to Dan Heath, but I hit the wrong 
button.
 
While I have your attention, Now that the weather is getting better I hope 
everyone  is either working on their project or if you are past that phase I 
hope you are having a great time in the air.
 
Charlie (Jim) Morehead
Cameron Park, CA
N522PC

KR> SORRY!!!!!!!! boatless fuselage

[Chris Johnston]

Extremely sorry about  sending this post on "BOATLESS FUSELAGE" I have sent 
it to the wrong place, just ignore it. 

"You will probably find as time goes by that a lot in sport aircraft
design is very empirical, ie a bit like building old sailing ships, ( of
whihc I have a bit of an interest in ), line up a few planks on the river
bank with a plumb bob and a thumb, and away you go, undercarrige for
instance, there is not a lot of design information available, its a case of
this works, so everyone uses this, then follows over the years a process of
empirical development, I am surprised that thngs happen this way, I would
have thought that a more engineering approach would be more appropriate, 
but.."



Chris Johnston

North Richmond

NSW Australia

KR> Sorry forgot to give the author of the poem

[Ron Smith]

His name was John Gillespie.





Ron Smith
Kr2ssxl
Cypress Ca U.S.A.
mercedesm...@yahoo.com
http://ronsmith.myphotoalbum.com/albums.php

KR> sorry

[DENE COLLETT (SA)]

Sorry guys, that last e-mail was not meant to be sent to the group but a
private individual.
Regards
Dene Collett
KR2S builder
South Africa
mailto: dene.coll...@telkomsa.net

KR> sorry

[Colin & Bev Rainey]

Sorry gang not meant for net

Colin & Beverly Rainey
Apex Lending, Inc.
407-323-6960 (p)
407-557-3260 (f)
www.eloan2004cr.com
crai...@apexlending.com

KR>(Sorry)test

[Timothy Bellville]

Sorry guys , this is a test

KR>Sorry about the attachments

[Bobby Muse]

BlankI keep trying to create a new message for the KRnet, but each time my 
message goes out as an attachment.  I apologize, but does anyone know why or 
how it's happening.  I am using 'Outlook Express'.

Bobby Muse

KR>Sorry about the attachments

[Dan Heath]

Bobby,

Are your replying, or sending new.  I am getting your test messages, not as
attachments. 

N64KR

Daniel R. Heath - Columbia, SC

da...@kr-builder.org

See you in Mt. Vernon - 2004 - KR Gathering

See our KR at http://KR-Builder.org - Click on the pic
See our EAA Chapter 242 at http://EAA242.org

---Original Message---

From: KRnet
List-Post: krnet@list.krnet.org
Date: Saturday, December 13, 2003 7:55:31 AM
To: KRnet
Subject: KR>Sorry about the attachments

BlankI keep trying to create a new message for the KRnet, but each time my
message goes out as an attachment. I apologize, but does anyone know why or
how it's happening. I am using 'Outlook Express'.

Bobby Muse

___
see KRnet list details at http://www.krnet.org/instructions.html
. 

KR>Sorry about the attachments

[Bobby Sather]

To protect from virus, I don't belive you can send attachments


- Original Message - 
From: "Bobby Muse" <bm...@ev1.net>
To: "KRnet" <kr...@mylist.net>
Sent: Saturday, December 13, 2003 5:55 AM
Subject: KR>Sorry about the attachments


BlankI keep trying to create a new message for the KRnet, but each time my
message goes out as an attachment.  I apologize, but does anyone know why or
how it's happening.  I am using 'Outlook Express'.

Bobby Muse

___
see KRnet list details at http://www.krnet.org/instructions.html

KR>Sorry about the attachments

[Mark Langford]

Bobby Muse wrote:

>> BlankI keep trying to create a new message for the KRnet, but each time
my message goes out as an attachment.  I apologize, but does anyone know why
or how it's happening.  I am using 'Outlook Express'.<<

If you'll go to HELP while in Outlook (without any messages "expanded", then
"contents and index", search for "attachments" and pick "HTML", it'll tell
you that if you have chosen HTML then your messages are sent as plain text
with an HTML attachment.  Since the mail server is fixed to strip out HTML
(as a virus and obnoxious image filter), so when the message gets to the
list, there is an attachment, but it's empty.  So to fix it, go under TOOLS,
OPTIONS, SEND, and change MAIL SENDING FORMAT to PLAIN, rather than HTML.

Sending messages in HTML allows you to send web content such as embedded
images, cute little smiley faces, spinning propellers, and that sort of
thing.  Since I am "no fun", I don't have much use for it (it just makes the
file size larger and more distracting IMHO).

The truth about attachments is that last time I tried to eliminate
absolutely all attachments, those folks who send HTML and some other formats
stopped being able to post.  So right now we're just operating under a 10K
limit, which is smaller than most viruses that have been going around.
Anybody that knows how to make "Mailman" strip them ALL without side effects
would be my hero, since the people that host this particular list are
compeletely unresponsive, and I've yet been able to find a way anywhere else
on the web.

If I'm wrong about any of this, more savvy Outlook Express users are welcome
to correct me.  I don't claim to be an expert,  I just do the best I can.

By the way, Bobby Muse's plane is the best looking KR that I've personally
seen, although I haven't seen it for a few years.  The interior is
spectacularly detailed.

Mark Langford, Huntsville, AL
N56ML "at"  hiwaay.net
see KR2S project at http://home.hiwaay.net/~langford

KR>Sorry about the attachments

[Mark Jones]

Mark,
I am not sure that is the correct fix for Bobby. My "Mail Sending Format" in
Outlook Express has always been coded HTML and they always post. Now
directly below that option is "News Sending Format" and I have that coded
plain text. Could that possibly allow my post through? I did look through
all options for a "send as attachment" on/off switch but have not found it
yet. I know it is there somewhere.

Mark Jones (N886MJ)
Wales, WI  USA
E-mail me at flyk...@wi.rr.com
Visit my KR-2S CorvAIRCRAFT web site at
http://mywebpage.netscape.com/n886mj/homepage.html


- Original Message - 
From: "Mark Langford" 
>.  So to fix it, go under TOOLS,
> OPTIONS, SEND, and change MAIL SENDING FORMAT to PLAIN, rather than HTML.
>
>>
> If I'm wrong about any of this, more savvy Outlook Express users are
welcome
> to correct me.  I don't claim to be an expert,  I just do the best I can.
>
> >
> ___
> see KRnet list details at http://www.krnet.org/instructions.html
>

KR>Sorry about the attachments

[Patrick Driscoll]

I use outlook express and I have both messages and news set for HTML and all
of my messages get through.
Pat Driscoll
patric...@usfamily.net
Saint Paul, MN




-- http://USFamily.Net/info - Unlimited Internet - From $8.99/mo! --

KR>sorry

[alphabravo pilot]

Hi friends ... there are  new pics in our site, but there is aproblem
   with some  of my pics,  , I just knew that ,and we are going to
   correct them as soon as we can today.  best regards
 _

   MSN 8 with [1]e-mail virus protection service: 2 months FREE*

References

   1. http://g.msn.com/8HMBEN/2740??PS=

KR>Sorry, I forgot you cannot send attachments

[Dan Heath]

Mark,

I sent 4 messages with spread sheets for weight and balance, one with all 3
and 3 with one each.  I understand that you can approve them, however if you
don't want to do that, I can send them all to anyone who wants to include
their e-mail address. 

N64KR

Daniel R. Heath - Columbia, SC

da...@kr-builder.org

See you in Mt. Vernon - 2004 - KR Gathering

See our KR at http://KR-Builder.org - Click on the pic
See our EAA Chapter 242 at http://EAA242.org

KR>Sorry, I forgot you cannot send attachments

[larry severson]

Love to have the attachments sent to me, all 3 at once works.

>I sent 4 messages with spread sheets for weight and balance, one with all 3
>and 3 with one each.  I understand that you can approve them, however if you
>don't want to do that, I can send them all to anyone who wants to include
>their e-mail address.

Larry Severson
Fountain Valley, CA 92708
(714) 968-9852
lar...@socal.rr.com 

KR>Sorry, My Bad on the flight sim not coming up

[Dan Heath]

Alltel DSL sucks.  I thought I was connected, but it wasn't.  Thanks for the
link. 

N64KR

Daniel R. Heath - Columbia, SC

da...@kr-builder.org

See you in Red Oak - 2003

See our KR at http://KR-Builder.org - Click on the pic
See our EAA Chapter 242 at http://EAA242.org