[lace] Re: curling pieces
On Jan 14, 2005, at 21:03, Helene Gannac wrote: I didn't know DMC 50 was a Z ply. I've used it for years, and never had any problem until I used it with this particular metallic thread which I have never used before. I've never made any of the Springetts snakes, so didn't have anything to contribute to Brenda's original "poll". But, Helene's mention of metallic thread, *did* set some alarms a-ringing... :) I've been using metallic thread (fine: Sulky 142, Kreinik cord, and some of the madeira threads, like Astros) for ages, and never had any problems with pieces curling (lots of problems winding the bobbins, but that's a different story). But, the metallics have always been used *sparingly* - usually as a worker or an edge pair. I began to notice some misbehaviour, when I tried making a 2-Pair flake centre (1" diameter) using metallic excusively; it stretched in an unpredictable way. Still, the result was acceptable, and I considered the experiment as "positive". But the Windrose 2, which is much bigger... I'm so disgusted with the result, I didn't hang it on the tree; not even in the back, where it wouldn't show. As soon as I can find the time, I'll cut off the beads (waste not, want not) and trash it... :) So I think metallics have something to answer for, in addition to the S-ply/Z-ply conundrum (and, aren't all metallics Z-plied, on top of being naughty otherwise?) -- Tamara P Duvallhttp://t-n-lace.net/ Lexington, Virginia, USA (Formerly of Warsaw, Poland) - To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]
Re: [lace] curling pieces
Hello, Brenda, I didn't know DMC 50 was a Z ply. I've used it for years, and never had any problem until I used it with this particular metallic thread which I have never used before. I'm going to make the smae bookmzrk with a linen thread and the same metallic silver, just to see what happens! I'll keep you posted! Yes those 2 Brioude photos are great. I hope I'll be able to visit in September and those pieces will still be in the Museum. Yours in lace, Helene, the froggy from Melbourne, where we are luxuriating in a wet and coll day after 3 very hot ones! --- Brenda Paternoster <[EMAIL PROTECTED]> wrote: > Hello Helene > > If your DMC 30 is Broder Machine then it's a z-plied thread and I'm > pretty certain that that's why it's curled up - only happens with > Z-plies and narrow pieces lace. Bev Walker in canada and I are going > to test the theory again by working snakes in "mirror image" half > stitch, ie 3 over 2, 1 over 2, 3 over 4. The expected results are that > it will be the S-ply which curls. Will keep the group posted. > Find local movie times and trailers on Yahoo! Movies. http://au.movies.yahoo.com - To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]
[lace] Roseground Supplies
A couple of people have asked me for details about Roseground Supplies. It's run by Pat Hallam and Pam Sharples. Address: 62 Chetwynd Road Toton Nottingham NG9 6FT Telephone/Fax: +44 (0)115-9720110 Web site: http://www.roseground.com email: [EMAIL PROTECTED] No connection, just a previously satisfied customer. Jean in Poole - To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]
[lace] Vienna
Hi Everyone, I don't remember whether this has been mentioned before but it is worth another reminder! I treated myself to 4 days in Vienna just before Christmas and it was wonderful. If any of you visit the city then you must visit the Museum of Decorative Art and its incredibly beautiful display of historic lace. It is together with the glass collection and it seems to be a permanent exhibition. The lace is displayed in cabinets and you can easily come to study it at close range, but unfortunately there is no photography permitted. I visited the museum to see the Wiener Werkstatte section and so discovering the lace was an extra bonus. All the best and keep bobbin' along from Avril -- And on the 8th day, God created golf courses and lacemakers Avril Bayne Denmark - To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]
[lace] Lost little boy (Tsunami)
Thank you to all who recognised my description of the little Swedish boy, as the same picture that went the rounds last week, on Arachne, just as I thought. Wanted to check it out, and not send it on circling like a chain letter, but I am more than happy to pass on any if new. Pauline in Somerset on a very grey day. - To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]
Re: [lace] MagnaPin Web Site
In a message dated 1/14/05 6:33:44 AM Eastern Standard Time, [EMAIL PROTECTED] writes: > Like Carolina in Spain I am unable to order these as I am in the UK. > > But they are basically only a strong magnet with a "tunnel" attached to one > of them for the brooch pin to pass through. I must admit that my first > thought > when I looked at them, (before I realised it would be complicated to get > them > to here anyway,) was that it is a very expensive way of buying 4 magnets, > and > that there must be a way to add the little tube to a magnet. Maybe a circle > > of fabric to tone in with your outfit, with a little "pucker" to push the > brooch pin through. > Dear Lacemakers, Firstly: There is a www.qvcuk.com. However, I looked and they do not have the MagnaPins. One could ask. Demand = interest. There is also a qvcjp (Japan), but I didn't try it. Inside the tunnel that you push your pin through is some substance that grips the pin. The wrapper has instructions to insert a pin shaft into each end of the magnet a few times to loosen it up before you wear it. If you have a pacemaker or defibrilator or other implanted medical device, check with your doctor before using. The MagnaPin is nickel-plated, and may cause a skin reaction to persons allergic to nickel. There is a Web Site where you can see drawings (if you are thinking of making your own) and more useful information. http://www.magnapin.com/index.html Look at all the menu options offered to learn more. Jeri - To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]
[lace] magnetic brooch holder ideas
Like Carolina in Spain I am unable to order these as I am in the UK. But they are basically only a strong magnet with a "tunnel" attached to one of them for the brooch pin to pass through. I must admit that my first thought when I looked at them, (before I realised it would be complicated to get them to here anyway,) was that it is a very expensive way of buying 4 magnets, and that there must be a way to add the little tube to a magnet. Maybe a circle of fabric to tone in with your outfit, with a little "pucker" to push the brooch pin through. We have got some small magnets (quarter inch) which were bought at Lee Valley (in Ottawa), and when I got up to fetch them discovered that the ones Richard chose have a small hole through the centre. They are what are described as "rare earth" magnets and in the newest catalogue I have (2003) they were 50 cents (CA) each (or 40c for 10+). The brooch pin could very easily be sewn onto one of these and at that price you could have one for each brooch, or a pair to make it more balanced as Jeri suggests. There is a website www.leevalley.com and I'm sure you could see them there. In case you are worrying about losing the brooch, the quarter inch magnet will lift a two-and-a-half pound block of steel, so if you are "sticking" magnet to magnet (even with fabric between) it will be a firm hold! I've just tried it through a thick wooly sweater and had to prise them apart. Now, this doesn't directly help non USA and Canadian citizens but there must be sources of magnets in your own countries. Lee Valley for those of you who haven't heard of it is a store selling woodworking tools, fittings for furniture and the like, and gardening stuff. A magical place for us Brits as the quality is mostly good to excellent and the prices (especially with the favourable exchange rate) about half the cost of mediocre tools in the UK. But it's not a specialist *magnet shop*. Just one more thought, as with any sort of magnets, keep them away from your credit and other "swipe" cards! Jacquie - To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]
[lace] MagnaPins for Holding Lace
After a long discussion with Devon today, I've decided to tell you about MagnaPin Jewelry Fasteners, which might meet a need lace wearers have. Two sets are $26.50 + p/h. Thank you Jeri I have considered very interesting your information. It is not known here in Spain this little and so practice stuff. I have entered the page but they ship only to Canada and USA. Perhaps anyone on the list could help me to buy it. If so, please contact me privately. Thank you again. Carolina. Barcelona. Spain. -- Carolina de la Guardia http://www.geocities.com/carolgallego/ Private apartments for rent on Spanish Coast http://www.winterinspain.com - To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]
Re: [lace] Re: Translation ? Polish
I have had a quick look in the International Lace Dictionary and cannot find the word 'pitsipulgad' in any of the languages that are included. In Finnish there are 2 words pitsinpatka and pitsipatja which mean strip of lace and lace pillow respectively. Jean in Cleveland U.K. On 12 Jan 2005, at 23:04, Tamara P. Duvall wrote: On Jan 12, 2005, at 1:10, Brian Lemin wrote: pitsipulgad Can anyone translate this word for me please? Not anyone from Poland That's Finnish, I think, or maybe Estonian; I recognize "pitsi" (lace) but nothing else... -- Tamara P Duvallhttp://t-n-lace.net/ Lexington, Virginia, USA (Formerly of Warsaw, Poland) - To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED] - To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]
