Re: Wave Attachment
Hi all, C.G.what is spackling compound?,is it similar to Polyfilla,it is an indoor plaster filling compound,that can be sanded very smooth,ideal for voids revealed under old wallpaper,and very interesting things under the old paper,such as old newspapers ,great story's and articles about the war and slimy politicians,so what's new,.. Bill I have sent off an E/Ml. about the logs,waiting for a reply,will let you know when I hear, I'm trying to make your design of the twist mechanism,hell that's a big word I'll have to rest my brain,MAC. On Aug 28, 2:04 am, curt george curtgeo...@wowway.com wrote: Well Thank you Bill I came up with an old article a few years back about using plaster-of-Paris to fill in the grain on old painted goods. In the article it stated that this method worked well for its time, but the plaster dries out and can shrink. I bet you guessed it,One day I ran short of wood filler on a project so I used light weight spackling compound, It dose not shrink... ( and I had it on hand, So I figured, Why not try???) The stuff go's on realy easy, sands out like nothing flat. it takes paint and stain realy well. So on most of my plywood projects I seal all the opened grain with spackling compound,sand the hole project, then stain and seal the wood with poly. or shellac. for the pedestal I sealed with shellac and then stained again, I used red mahogany stain (General finishes.) What I think looks neat is to cut ropes on plywood, it gives an elusion that the wood in waving/twisting. (the photo realy doesn't do this effect justice) The legs on the portable alter was a split turning of a off sized rope (I like to call it a rope and ribbon combo.) One more note on plywood, I find that there are many kinds of plywood's, thin veneer works well, but I find that I like the look of construction grade plywood. even though it dose have some voids. The plywood cuts alright on the legacy,although there is some glue build up on the cutter, so you need to hone the cutter a little bit more often, but I find that the build up isn't as bad as turning pine. I need to go. have a good night. C.A.G. - Original Message - From: Bill Bulkeley bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, August 27, 2009 5:40 AM Subject: Re: Wave Attachment I like the pole goes to show once painted it can be made of anything and still looks great what did you stain the column with I cant tell if its made of plywood looks great too I like the puppet stage as well Bill - Original Message - From: curt george curtgeo...@wowway.com To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, August 27, 2009 6:19 PM Subject: Re: Wave Attachment Single and 4 kids! Wow!!! I had three in my house just a few month ago,but now Im down to two. I can understand something about your time/money that you must be going through. Yes I can get my hands on almost any wood I choose, but I normally use what I can when doing different projects, Friends use to tease me about being a plywood master,(because that's a easy medium for me to get my hands on, its cheap and...) Im in a hurry. but I am posting some pix's to show you what can be done . have a good day. C.A.G. - Original Message - From: Bill Bulkeley bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, August 26, 2009 6:26 PM Subject: Re: Wave Attachment Its no better here in Aus wood is always a problem.tools are a little better thanks to the internet. I too wish we had the availability of different woods the Americans do, and any that are are worth a fortune . I'm a single dad of 4 children so money is always an issue. so I figger if you cant get a lovely grained wood then make the dull old wood available to you have lots of patterns in it like the wave pattern walking stick was a hard wood tomato stake from the local nursery but your so busy looking at the pattern you don't notice what the wood is.I live in a small town called Castlemaine. in Victoria it is about 1 1/2 hours drive from Melbourne Bill - Original Message - From: MACSWAG TAE davidcraig.dil...@virgin.net To: Legacy Ornamental Mills legacy-ornamental-mills@googlegroups.com Sent: Thursday, August 27, 2009 5:59 AM Subject: Re: Wave Attachment Me again BILL,I live in the U.K.sorry about the confusion,I wish I did live in U.S.A. tools and wood are more reasonably priced,here every-one is out to get top buck,MAC On Aug 25, 3:21 am, Bill Bulkeley bulke...@mmnet.com.au wrote: I don't have any more wave stuff I've been to busy doing other stuff none revo. but here is a pic or 2 I posted before you might have not seen all made on the revo.Im no expert either but its all fun. and if the teak is in Australia then yes Im interested always interested in wood to turn Bill -
Re: Wave Attachment
Hello Yes that sounds very much like the same stuff. If you need any help making your own wave attachment, feel free to ask, I just might have a few ideas that might help you out. Good luck. I will talk to you latter. C.A.G. - Original Message - From: MACSWAG TAE davidcraig.dil...@virgin.net To: Legacy Ornamental Mills legacy-ornamental-mills@googlegroups.com Sent: Friday, August 28, 2009 4:35 PM Subject: Re: Wave Attachment Hi all, C.G.what is spackling compound?,is it similar to Polyfilla,it is an indoor plaster filling compound,that can be sanded very smooth,ideal for voids revealed under old wallpaper,and very interesting things under the old paper,such as old newspapers ,great story's and articles about the war and slimy politicians,so what's new,.. Bill I have sent off an E/Ml. about the logs,waiting for a reply,will let you know when I hear, I'm trying to make your design of the twist mechanism,hell that's a big word I'll have to rest my brain,MAC. On Aug 28, 2:04 am, curt george curtgeo...@wowway.com wrote: Well Thank you Bill I came up with an old article a few years back about using plaster-of-Paris to fill in the grain on old painted goods. In the article it stated that this method worked well for its time, but the plaster dries out and can shrink. I bet you guessed it,One day I ran short of wood filler on a project so I used light weight spackling compound, It dose not shrink... ( and I had it on hand, So I figured, Why not try???) The stuff go's on realy easy, sands out like nothing flat. it takes paint and stain realy well. So on most of my plywood projects I seal all the opened grain with spackling compound,sand the hole project, then stain and seal the wood with poly. or shellac. for the pedestal I sealed with shellac and then stained again, I used red mahogany stain (General finishes.) What I think looks neat is to cut ropes on plywood, it gives an elusion that the wood in waving/twisting. (the photo realy doesn't do this effect justice) The legs on the portable alter was a split turning of a off sized rope (I like to call it a rope and ribbon combo.) One more note on plywood, I find that there are many kinds of plywood's, thin veneer works well, but I find that I like the look of construction grade plywood. even though it dose have some voids. The plywood cuts alright on the legacy,although there is some glue build up on the cutter, so you need to hone the cutter a little bit more often, but I find that the build up isn't as bad as turning pine. I need to go. have a good night. C.A.G. - Original Message - From: Bill Bulkeley bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, August 27, 2009 5:40 AM Subject: Re: Wave Attachment I like the pole goes to show once painted it can be made of anything and still looks great what did you stain the column with I cant tell if its made of plywood looks great too I like the puppet stage as well Bill - Original Message - From: curt george curtgeo...@wowway.com To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, August 27, 2009 6:19 PM Subject: Re: Wave Attachment Single and 4 kids! Wow!!! I had three in my house just a few month ago,but now Im down to two. I can understand something about your time/money that you must be going through. Yes I can get my hands on almost any wood I choose, but I normally use what I can when doing different projects, Friends use to tease me about being a plywood master,(because that's a easy medium for me to get my hands on, its cheap and...) Im in a hurry. but I am posting some pix's to show you what can be done . have a good day. C.A.G. - Original Message - From: Bill Bulkeley bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, August 26, 2009 6:26 PM Subject: Re: Wave Attachment Its no better here in Aus wood is always a problem.tools are a little better thanks to the internet. I too wish we had the availability of different woods the Americans do, and any that are are worth a fortune . I'm a single dad of 4 children so money is always an issue. so I figger if you cant get a lovely grained wood then make the dull old wood available to you have lots of patterns in it like the wave pattern walking stick was a hard wood tomato stake from the local nursery but your so busy looking at the pattern you don't notice what the wood is.I live in a small town called Castlemaine. in Victoria it is about 1 1/2 hours drive from Melbourne Bill - Original Message - From: MACSWAG TAE davidcraig.dil...@virgin.net To: Legacy Ornamental Mills legacy-ornamental-mills@googlegroups.com Sent: Thursday, August 27, 2009 5:59 AM Subject: Re: Wave Attachment Me again BILL,I live in the U.K.sorry about the confusion,I wish I did live in U.S.A. tools and
Re: Wave Attachment
you guys probably already know but for those who don't check this out http://www.legacycncwoodworking.com/ Bill - Original Message - From: curt george curtgeo...@wowway.com To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, August 29, 2009 6:49 AM Subject: Re: Wave Attachment Hello Yes that sounds very much like the same stuff. If you need any help making your own wave attachment, feel free to ask, I just might have a few ideas that might help you out. Good luck. I will talk to you latter. C.A.G. - Original Message - From: MACSWAG TAE davidcraig.dil...@virgin.net To: Legacy Ornamental Mills legacy-ornamental-mills@googlegroups.com Sent: Friday, August 28, 2009 4:35 PM Subject: Re: Wave Attachment Hi all, C.G.what is spackling compound?,is it similar to Polyfilla,it is an indoor plaster filling compound,that can be sanded very smooth,ideal for voids revealed under old wallpaper,and very interesting things under the old paper,such as old newspapers ,great story's and articles about the war and slimy politicians,so what's new,.. Bill I have sent off an E/Ml. about the logs,waiting for a reply,will let you know when I hear, I'm trying to make your design of the twist mechanism,hell that's a big word I'll have to rest my brain,MAC. On Aug 28, 2:04 am, curt george curtgeo...@wowway.com wrote: Well Thank you Bill I came up with an old article a few years back about using plaster-of-Paris to fill in the grain on old painted goods. In the article it stated that this method worked well for its time, but the plaster dries out and can shrink. I bet you guessed it,One day I ran short of wood filler on a project so I used light weight spackling compound, It dose not shrink... ( and I had it on hand, So I figured, Why not try???) The stuff go's on realy easy, sands out like nothing flat. it takes paint and stain realy well. So on most of my plywood projects I seal all the opened grain with spackling compound,sand the hole project, then stain and seal the wood with poly. or shellac. for the pedestal I sealed with shellac and then stained again, I used red mahogany stain (General finishes.) What I think looks neat is to cut ropes on plywood, it gives an elusion that the wood in waving/twisting. (the photo realy doesn't do this effect justice) The legs on the portable alter was a split turning of a off sized rope (I like to call it a rope and ribbon combo.) One more note on plywood, I find that there are many kinds of plywood's, thin veneer works well, but I find that I like the look of construction grade plywood. even though it dose have some voids. The plywood cuts alright on the legacy,although there is some glue build up on the cutter, so you need to hone the cutter a little bit more often, but I find that the build up isn't as bad as turning pine. I need to go. have a good night. C.A.G. - Original Message - From: Bill Bulkeley bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, August 27, 2009 5:40 AM Subject: Re: Wave Attachment I like the pole goes to show once painted it can be made of anything and still looks great what did you stain the column with I cant tell if its made of plywood looks great too I like the puppet stage as well Bill - Original Message - From: curt george curtgeo...@wowway.com To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, August 27, 2009 6:19 PM Subject: Re: Wave Attachment Single and 4 kids! Wow!!! I had three in my house just a few month ago,but now Im down to two. I can understand something about your time/money that you must be going through. Yes I can get my hands on almost any wood I choose, but I normally use what I can when doing different projects, Friends use to tease me about being a plywood master,(because that's a easy medium for me to get my hands on, its cheap and...) Im in a hurry. but I am posting some pix's to show you what can be done . have a good day. C.A.G. - Original Message - From: Bill Bulkeley bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, August 26, 2009 6:26 PM Subject: Re: Wave Attachment Its no better here in Aus wood is always a problem.tools are a little better thanks to the internet. I too wish we had the availability of different woods the Americans do, and any that are are worth a fortune . I'm a single dad of 4 children so money is always an issue. so I figger if you cant get a lovely grained wood then make the dull old wood available to you have lots of patterns in it like the wave pattern walking stick was a hard wood tomato stake from the local nursery but your so busy looking at the pattern you don't notice what the wood is.I live in a small town called Castlemaine. in Victoria it is about 1 1/2 hours drive from Melbourne Bill