Re: Design

[Chainlink]

Yeah, that's it too. There's some great pictures in that post that detail 
the construction. 
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design

[Chainlink]

It's 1 1/2" - 5tpi oak.

On Sunday, June 10, 2018 at 7:38:32 AM UTC-4, Richard Ellis wrote:
>
>  Now looks interesting My one concern is the threaded rod TPI and what 
> wood did you use.
>
> On Sunday, June 10, 2018 at 12:28:54 PM UTC+1, Chainlink wrote:
>>
>>
>> 
>>
>>
>> I can't believe that google has not one image of this, but JR Beall put a 
>> flyer in the wood threading kits that had a plan for an adjustable height 
>> stool that I really like. Here is a photo of the one I made. 
>>
>> The support block under the stool seat is 1.5" thick and has a 1.5" hole 
>> bored in its center for the threaded rod (that end is not threaded, btw). 
>> the frame upper support is also 1.5" thick and is tapped for the threaded 
>> rod. The bottom support has a 1.5" hole to keep the threaded rod centered, 
>> but it is not threaded. The seat really needs to be scooped out for comfort 
>> or padding of some kind needs to be added.
>>
>> Dustin
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Pleasing yourself

[Bawdsey64]

Hi Michael
Now $2,800 a day is a good rate and I have no doubt they learnt a lot and were 
also entertained. But when you analyse the numbers he has hotel, food & travel 
to take out of it plus he pays US taxes. Still beats real manual work but it 
can be hard work teaching people.
I am getting ready to go to Portland for the AAW Symposium this week and it 
made me think where would I learn the most?
Cheers
Roger






From: Michael Kratky
Received: 11/06/2018 14:12:12 +01:00
To: legacy-ornamental-mills@googlegroups.com
Hi Curt,
Another turning Club here in the Albany NY area that I belong to just had Jimmy 
Clewes come in a do 2 two day back to back hands on workshops for 16 
participants charging some $350 per individual, one member new to turning asked 
me at the Club meeting a few days prior wanted to know what he sells, I 
responded himself.

Michael
 
From: 'Curt George' via Legacy Ornamental Mills 
[mailto:legacy-ornamental-mills@googlegroups.com]
Sent: Monday, June 11, 2018 8:19 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: RE: Design and 1200 LOM lead
 
Hello Michael
 
I am sorry to hear about your fathers passing. ( I know its been 7 years, but 
that loss never quite leaves you.)
 
Its hard for me to understand, a wood turners club would not like the Legacy??? 
but like what I said earlier, spindles are not what people
want to make today. The ornamental look (flutes and roping mainly. ) Is 
something form the past generations,  Even thought I like this type of
construction, people today just are not into it.
I met an Antique dealer, not long ago. He told me his sales are way down, and 
no one under 50 yrs. old ever comes into his store any more.
 
I don't know what people like or want any more.  A garage full of tools! "Man" 
that is my idea of a dream come true. So what ever happen to all
those tools of your dad's?  I hope you found a good home for them? or at least 
keep what you could?
 
Its like the song that I posted form Ricky Nelson, Garden party,  "You cant 
please everyone...So you might as well please your self." ;-)
 
Have a great day.
 
C.A.G.
  
 
On Sunday, June 10, 2018, 9:10:09 AM EDT, Michael Kratky 
 wrote:
 
 
Hello Bill,
Parallel thoughts; have no family member that is the least bit interested or 
appreciative, schools don’t teach hand skill classes any more (at least here in 
NY),  loaned my 1200 LOM to the Mohawk Valley Woodturners club for a solid year 
in 2014 they had  no interest so I brought it back and it’s been in storage 
since.
Interesting how one’s mind starts to work when the body and mind remind you 
every day that sands in the hour glass are running out.
My dad who made his living as a carpenter passed away some 7 years ago at age 
88 leaving behind a garage full of tools that I couldn’t even give away, most 
of the power and cordless ones where those that I had given him.   
The last several years of his life he kept saying that they’d all be mine as I 
was the only heir in the building trades.
Michael K
 
 
From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Sunday, June 10, 2018 8:37 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Design and 1200 LOM lead
 
I feel your pain guys i have a workshop full of stuff to and 4 sons to leave it 
all too one day, accept none of them are the slightest bit interested in any of 
it. When I am ready one day in the far future to stop rather than just scrap I 
think I will donate to a club or school or something
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis
Sent: Sunday, 10 June 2018 7:40 PM
To: Legacy Ornamental Mills
Subject: Re: Design and 1200 LOM lead
 
How right you are Curt, I have had about a dozen men and women looking at my 
house that is for sale, and not one of the men showed any interest in the 
contents of my two workshops  a metal work one with lathe milling machine 
drill press etc.etc.
Woodwork one  Record wood lathe Revo LOM, Radial arm saw Scroll saw Woodrat  
another drill press and several routers and other wood working equipment.
When I move a lot of it will go to scrap not the Revo or Scroll saw
Richard


On Saturday, June 9, 2018 at 2:41:11 PM UTC+1, Curt George wrote:
Hello and Good morning Micheal.
 
"Beauty is in the eye of the beholder".  
The Legacy and the Lathe for that matter are tools that honestly not many 
people today are interested in. and those who 
are only do a few things on them. ( pens or bowls) For some reason at this time 
 people don't make spindles.( and that is what the Legacy does best!)
My guess is, Someday Like the OT lathes , People will come back to them, Sadly 
it may take 100 yrs, but what's old will become new again, Someday.
 
Have a great day.
 
I for one am going out to the shop and PLAY, And I will be using my Legacy.
 
 
 
:-)
 
C.A.G.
 
On Friday, June 8, 2018, 

Pleasing yourself

[Michael Kratky]

Hi Curt,

Another turning Club here in the Albany NY area that I belong to just had Jimmy 
Clewes come in a do 2 two day back to back hands on workshops for 16 
participants charging some $350 per individual, one member new to turning asked 
me at the Club meeting a few days prior wanted to know what he sells, I 
responded himself.



Michael

 

From: 'Curt George' via Legacy Ornamental Mills 
[mailto:legacy-ornamental-mills@googlegroups.com] 
Sent: Monday, June 11, 2018 8:19 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: RE: Design and 1200 LOM lead

 

Hello Michael

 

I am sorry to hear about your fathers passing. ( I know its been 7 years, but 
that loss never quite leaves you.)

 

Its hard for me to understand, a wood turners club would not like the Legacy??? 
but like what I said earlier, spindles are not what people

want to make today. The ornamental look (flutes and roping mainly. ) Is 
something form the past generations,  Even thought I like this type of

construction, people today just are not into it.

I met an Antique dealer, not long ago. He told me his sales are way down, and 
no one under 50 yrs. old ever comes into his store any more.

 

I don't know what people like or want any more.  A garage full of tools! "Man" 
that is my idea of a dream come true. So what ever happen to all

those tools of your dad's?  I hope you found a good home for them? or at least 
keep what you could?

 

Its like the song that I posted form Ricky Nelson, Garden party,  "You cant 
please everyone...So you might as well please your self." ;-)

 

Have a great day.

 

C.A.G.

  

 

On Sunday, June 10, 2018, 9:10:09 AM EDT, Michael Kratky 
 wrote: 

 

 

Hello Bill,

Parallel thoughts; have no family member that is the least bit interested or 
appreciative, schools don’t teach hand skill classes any more (at least here in 
NY),  loaned my 1200 LOM to the Mohawk Valley Woodturners club for a solid year 
in 2014 they had  no interest so I brought it back and it’s been in storage 
since. 

Interesting how one’s mind starts to work when the body and mind remind you 
every day that sands in the hour glass are running out.

My dad who made his living as a carpenter passed away some 7 years ago at age 
88 leaving behind a garage full of tools that I couldn’t even give away, most 
of the power and cordless ones where those that I had given him.   

The last several years of his life he kept saying that they’d all be mine as I 
was the only heir in the building trades.

Michael K

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Sunday, June 10, 2018 8:37 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Design and 1200 LOM lead

 

I feel your pain guys i have a workshop full of stuff to and 4 sons to leave it 
all too one day, accept none of them are the slightest bit interested in any of 
it. When I am ready one day in the far future to stop rather than just scrap I 
think I will donate to a club or school or something

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis
Sent: Sunday, 10 June 2018 7:40 PM
To: Legacy Ornamental Mills
Subject: Re: Design and 1200 LOM lead

 

How right you are Curt, I have had about a dozen men and women looking at my 
house that is for sale, and not one of the men showed any interest in the 
contents of my two workshops  a metal work one with lathe milling machine 
drill press etc.etc.

Woodwork one  Record wood lathe Revo LOM, Radial arm saw Scroll saw Woodrat  
another drill press and several routers and other wood working equipment.

When I move a lot of it will go to scrap not the Revo or Scroll saw

Richard



On Saturday, June 9, 2018 at 2:41:11 PM UTC+1, Curt George wrote:

Hello and Good morning Micheal.

 

"Beauty is in the eye of the beholder".  

The Legacy and the Lathe for that matter are tools that honestly not many 
people today are interested in. and those who 

are only do a few things on them. ( pens or bowls) For some reason at this time 
 people don't make spindles.( and that is what the Legacy does best!)

My guess is, Someday Like the OT lathes , People will come back to them, Sadly 
it may take 100 yrs, but what's old will become new again, Someday.

 

Have a great day.

 

I for one am going out to the shop and PLAY, And I will be using my Legacy.

 

 

 

:-)

 

C.A.G.

 

On Friday, June 8, 2018, 10:20:50 AM EDT, Michael Kratky 
 wrote: 

 

 

Agree with Curt about the Piano Stool.

 

BTW; interestingly I have a lead on a 1200 motorized LOM very close to me but 
the owner’s son who inherited it some 10 years ago wants unrealistic full 
retail calling it a duplicator. This discussion is periodically surfacing 
within in this group as to what these mills are really worth, but I guess it 
boils down to how bad either side wants it, the flip side is 

Re: RE: Design and 1200 LOM lead

['Curt George' via Legacy Ornamental Mills]

 Hello Michael
I am sorry to hear about your fathers passing. ( I know its been 7 years, but 
that loss never quite leaves you.)
Its hard for me to understand, a wood turners club would not like the Legacy??? 
but like what I said earlier, spindles are not what peoplewant to make today. 
The ornamental look (flutes and roping mainly. ) Is something form the past 
generations,  Even thought I like this type ofconstruction, people today just 
are not into it.I met an Antique dealer, not long ago. He told me his sales are 
way down, and no one under 50 yrs. old ever comes into his store any more.
I don't know what people like or want any more.  A garage full of tools! "Man" 
that is my idea of a dream come true. So what ever happen to allthose tools of 
your dad's?  I hope you found a good home for them? or at least keep what you 
could?
Its like the song that I posted form Ricky Nelson, Garden party,  "You cant 
please everyone...So you might as well please your self." ;-)
Have a great day.
C.A.G.  
On Sunday, June 10, 2018, 9:10:09 AM EDT, Michael Kratky 
 wrote:  
 
 #yiv3213503207 #yiv3213503207 -- _filtered #yiv3213503207 
{font-family:Helvetica;panose-1:2 11 6 4 2 2 2 2 2 4;} _filtered #yiv3213503207 
{panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv3213503207 
{font-family:Tahoma;panose-1:2 11 6 4 3 5 4 4 2 4;} _filtered #yiv3213503207 
{font-family:Sans;panose-1:3 15 7 2 3 3 2 2 2 4;}#yiv3213503207 #yiv3213503207 
p.yiv3213503207MsoNormal, #yiv3213503207 li.yiv3213503207MsoNormal, 
#yiv3213503207 div.yiv3213503207MsoNormal 
{margin:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:New;}#yiv3213503207
 a:link, #yiv3213503207 span.yiv3213503207MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv3213503207 a:visited, #yiv3213503207 
span.yiv3213503207MsoHyperlinkFollowed 
{color:purple;text-decoration:underline;}#yiv3213503207 p 
{margin-right:0in;margin-left:0in;font-size:12.0pt;font-family:New;}#yiv3213503207
 span.yiv3213503207EmailStyle18 
{color:windowtext;font-weight:normal;font-style:normal;}#yiv3213503207 
span.yiv3213503207EmailStyle19 
{font-family:Sans;color:black;font-weight:normal;font-style:normal;}#yiv3213503207
 .yiv3213503207MsoChpDefault {font-size:10.0pt;} _filtered #yiv3213503207 
{margin:1.0in 1.0in 1.0in 1.0in;}#yiv3213503207 div.yiv3213503207WordSection1 
{}#yiv3213503207 
Hello Bill,

Parallel thoughts; have no family member that is the least bit interested or 
appreciative, schools don’t teach hand skill classes any more (at least here in 
NY),  loaned my 1200 LOM to the Mohawk Valley Woodturners club for a solid year 
in 2014 they had  no interest so I brought it back and it’s been in storage 
since. 

Interesting how one’s mind starts to work when the body and mind remind you 
every day that sands in the hour glass are running out.

My dad who made his living as a carpenter passed away some 7 years ago at age 
88 leaving behind a garage full of tools that I couldn’t even give away, most 
of the power and cordless ones where those that I had given him.   

The last several years of his life he kept saying that they’d all be mine as I 
was the only heir in the building trades.

Michael K

  

  

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Sunday, June 10, 2018 8:37 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Design and 1200 LOM lead

  

I feel your pain guys i have a workshop full of stuff to and 4 sons to leave it 
all too one day, accept none of them are the slightest bit interested in any of 
it. When I am ready one day in the far future to stop rather than just scrap I 
think I will donate to a club or school or something

Bill 

  

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis
Sent: Sunday, 10 June 2018 7:40 PM
To: Legacy Ornamental Mills
Subject: Re: Design and 1200 LOM lead

  

How right you are Curt, I have had about a dozen men and women looking at my 
house that is for sale, and not one of the men showed any interest in the 
contents of my two workshops  a metal work one with lathe milling machine 
drill press etc.etc.

Woodwork one  Record wood lathe Revo LOM, Radial arm saw Scroll saw Woodrat  
another drill press and several routers and other wood working equipment.

When I move a lot of it will go to scrap not the Revo or Scroll saw

Richard



On Saturday, June 9, 2018 at 2:41:11 PM UTC+1, Curt George wrote:

Hello and Good morning Micheal.

  

"Beauty is in the eye of the beholder".  

The Legacy and the Lathe for that matter are tools that honestly not many 
people today are interested in. and those who 

are only do a few things on them. ( pens or bowls) For some reason at this time 
 people don't make spindles.( and that is what the Legacy does best!)

My guess is, Someday Like the OT lathes , People will come back to them, Sadly 
it may take 100 yrs, but 

Re: RE: RE: Design

['Curt George' via Legacy Ornamental Mills]

 Good morning Bill
Yes I was thinking the very same thing, along with some flutes, perhaps some 
buttons cut into the sides of the legs and seat? I was thinking of some way to 
make claw type of feet as well. That type of detail is always a nice eye 
catcher..
C.A.G.

On Sunday, June 10, 2018, 5:25:24 PM EDT, Bill Bulkeley 
 wrote:  
 
 #yiv6998117281 #yiv6998117281 -- _filtered #yiv6998117281 
{font-family:Helvetica;panose-1:2 11 6 4 2 2 2 2 2 4;} _filtered #yiv6998117281 
{panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv6998117281 
{font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;} _filtered #yiv6998117281 
{font-family:Tahoma;panose-1:2 11 6 4 3 5 4 4 2 4;} _filtered #yiv6998117281 
{font-family:New;panose-1:0 0 0 0 0 0 0 0 0 0;}#yiv6998117281 #yiv6998117281 
p.yiv6998117281MsoNormal, #yiv6998117281 li.yiv6998117281MsoNormal, 
#yiv6998117281 div.yiv6998117281MsoNormal 
{margin:0cm;margin-bottom:.0001pt;font-size:12.0pt;font-family:New;}#yiv6998117281
 a:link, #yiv6998117281 span.yiv6998117281MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv6998117281 a:visited, #yiv6998117281 
span.yiv6998117281MsoHyperlinkFollowed 
{color:purple;text-decoration:underline;}#yiv6998117281 p 
{margin-right:0cm;margin-left:0cm;font-size:12.0pt;font-family:New;}#yiv6998117281
 p.yiv6998117281separator, #yiv6998117281 li.yiv6998117281separator, 
#yiv6998117281 div.yiv6998117281separator 
{margin-right:0cm;margin-left:0cm;font-size:12.0pt;font-family:New;}#yiv6998117281
 p.yiv6998117281msonormal, #yiv6998117281 li.yiv6998117281msonormal, 
#yiv6998117281 div.yiv6998117281msonormal 
{margin-right:0cm;margin-left:0cm;font-size:12.0pt;font-family:New;}#yiv6998117281
 span.yiv6998117281msohyperlink {}#yiv6998117281 
span.yiv6998117281msohyperlinkfollowed {}#yiv6998117281 
span.yiv6998117281emailstyle19 {}#yiv6998117281 p.yiv6998117281msonormal1, 
#yiv6998117281 li.yiv6998117281msonormal1, #yiv6998117281 
div.yiv6998117281msonormal1 
{margin:0cm;margin-bottom:.0001pt;font-size:12.0pt;}#yiv6998117281 
span.yiv6998117281msohyperlink1 
{color:blue;text-decoration:underline;}#yiv6998117281 
span.yiv6998117281msohyperlinkfollowed1 
{color:purple;text-decoration:underline;}#yiv6998117281 
p.yiv6998117281separator1, #yiv6998117281 li.yiv6998117281separator1, 
#yiv6998117281 div.yiv6998117281separator1 
{margin-right:0cm;margin-left:0cm;font-size:12.0pt;}#yiv6998117281 
span.yiv6998117281emailstyle191 
{color:windowtext;font-weight:normal;font-style:normal;}#yiv6998117281 
span.yiv6998117281EmailStyle28 
{color:windowtext;font-weight:normal;font-style:normal;}#yiv6998117281 
.yiv6998117281MsoChpDefault {font-size:10.0pt;} _filtered #yiv6998117281 
{margin:72.0pt 72.0pt 72.0pt 72.0pt;}#yiv6998117281 div.yiv6998117281Section1 
{}#yiv6998117281 
Some reeds, flutes or rosettes on the legsmight fancy it up a might.
 
Bill
 
  
 
  
 
From:'Curt George' via Legacy Ornamental 
Mills[mailto:legacy-ornamental-mills@googlegroups.com] 
Sent: Monday, 11 June 2018 1:50 AM
To:legacy-ornamental-mills@googlegroups.com
Subject: Re: RE: Design
 
  
 
Hello everyone.
 
This is a nice topic to look at, Verynice stools (all of them.)
 
  
 
Besides the threaded rod, what otherembellishments do you all think could have 
been done if they used the Legacy???
 
  
 
Gota run.
 
talk to you all more latter.
 
  
 
C.A.G. 
 
  
 
OnSunday, June 10, 2018, 8:30:04 AM EDT, Bill Bulkeley 
wrote: 
 
  
 
  
 
Couldn’tfind any plans but found this looks the same stool
 
http://169.46.96.71/projects/357497
 
 
 
Bill
 
 
 
From:legacy-ornamental-mills@googlegroups.com[mailto:legacy-ornamental-mills@googlegroups.com]
 On Behalf Of Chainlink
Sent: Sunday, 10 June 2018 9:29 PM
To: Legacy Ornamental Mills
Subject: Re: Design
 
 
 

 

 
I can'tbelieve that google has not one image of this, but JR Beall put a flyer 
in thewood threading kits that had a plan for an adjustable height stool that 
Ireally like. Here is a photo of the one I made. 
 
 
 
The supportblock under the stool seat is 1.5" thick and has a 1.5" hole bored 
inits center for the threaded rod (that end is not threaded, btw). the 
frameupper support is also 1.5" thick and is tapped for the threaded rod. 
Thebottom support has a 1.5" hole to keep the threaded rod centered, but itis 
not threaded. The seat really needs to be scooped out for comfort or paddingof 
some kind needs to be added.
 
 
 
Dustin
 
-- 
You received this message because you are subscribed to the Google 
Groups"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an 
emailto legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.
 
 
 
|  

  |  
Virus-free. www.avg.com 
  |


 
 
-- 
You received this message because you are subscribed to the Google 
Groups"Legacy