date:20230105

I think the 2x gear is smaller than the legacy rotary table gear but it should 
work ok fudge away, please keep us in the loop if you do with pics

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tom B.C. Canada
Sent: Friday, 6 January 2023 5:20 PM
To: Legacy Ornamental Mills 
Subject: Re: old 900

 

I just realized I could fab up a rotary table from the 10"  2x  duplex gear and 
a smaller gear.

maybe get some bevel gears from a radial arm saw height winder  to transfer the 
handle motion to the table.

On Thursday, January 5, 2023 at 10:10:02 PM UTC-8 Tom B.C. Canada wrote:

On Thursday, January 5, 2023 at 10:09:32 PM UTC-8 Tom B.C. Canada wrote:

On Thursday, January 5, 2023 at 10:09:06 PM UTC-8 Tom B.C. Canada wrote:

On Thursday, January 5, 2023 at 10:08:37 PM UTC-8 Tom B.C. Canada wrote:

On Thursday, January 5, 2023 at 10:07:56 PM UTC-8 Tom B.C. Canada wrote:

On Thursday, January 5, 2023 at 10:07:01 PM UTC-8 Tom B.C. Canada wrote:

I don't think it's a 400 or 500.  the frame rails are 5 feet long.  

more pics

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/e74c9878-eabc-4441-90cd-830646adcbcfn%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d921a2%2408f6f080%241ae4d180%24%40mmnet.com.au.

Re: old 900

I think you're right Bill, it seems to be the closest  even though it says 
the 800 should have a MT2 head.
almost 12" between frame rails and 8&1/2" between bed rails.   Y axis rails 
are 15&1/2" long.
has tapering capacity.  the tail is about 3/8" threaded rod.  The index hub 
is welded to the 3/4"  head shaft.
Thanks for the head link Curt...might go that route.
  


On Thursday, January 5, 2023 at 10:25:23 PM UTC-8 aussiman wrote:

> I’m sticking with my last guess as a model 800EXL I really think that’s 
> the one you have
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Tom B.C. Canada
> *Sent:* Friday, 6 January 2023 5:10 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Re: old 900
>
>  
>
> On Thursday, January 5, 2023 at 10:09:32 PM UTC-8 Tom B.C. Canada wrote:
>
> On Thursday, January 5, 2023 at 10:09:06 PM UTC-8 Tom B.C. Canada wrote:
>
> On Thursday, January 5, 2023 at 10:08:37 PM UTC-8 Tom B.C. Canada wrote:
>
> On Thursday, January 5, 2023 at 10:07:56 PM UTC-8 Tom B.C. Canada wrote:
>
> On Thursday, January 5, 2023 at 10:07:01 PM UTC-8 Tom B.C. Canada wrote:
>
> I don't think it's a 400 or 500.  the frame rails are 5 feet long.  
>
> more pics
>
> -- 
>
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
>
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/f59b8484-4078-4628-b72f-59cf10a8fdb4n%40googlegroups.com
>  
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/db6555be-c124-4905-86ab-51efacd78ce0n%40googlegroups.com.

RE: old 900

I’m sticking with my last guess as a model 800EXL I really think that’s the one 
you have

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tom B.C. Canada
Sent: Friday, 6 January 2023 5:10 PM
To: Legacy Ornamental Mills 
Subject: Re: old 900

 

On Thursday, January 5, 2023 at 10:09:32 PM UTC-8 Tom B.C. Canada wrote:

On Thursday, January 5, 2023 at 10:09:06 PM UTC-8 Tom B.C. Canada wrote:

On Thursday, January 5, 2023 at 10:08:37 PM UTC-8 Tom B.C. Canada wrote:

On Thursday, January 5, 2023 at 10:07:56 PM UTC-8 Tom B.C. Canada wrote:

On Thursday, January 5, 2023 at 10:07:01 PM UTC-8 Tom B.C. Canada wrote:

I don't think it's a 400 or 500.  the frame rails are 5 feet long.  

more pics

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/f59b8484-4078-4628-b72f-59cf10a8fdb4n%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/006301d92197%24a5282470%24ef786d50%24%40mmnet.com.au.

Re: old 900

I just realized I could fab up a rotary table from the 10"  2x  duplex gear 
and a smaller gear.
maybe get some bevel gears from a radial arm saw height winder  to transfer 
the handle motion to the table.

On Thursday, January 5, 2023 at 10:10:02 PM UTC-8 Tom B.C. Canada wrote:

> On Thursday, January 5, 2023 at 10:09:32 PM UTC-8 Tom B.C. Canada wrote:
>
>> On Thursday, January 5, 2023 at 10:09:06 PM UTC-8 Tom B.C. Canada wrote:
>>
>>> On Thursday, January 5, 2023 at 10:08:37 PM UTC-8 Tom B.C. Canada wrote:
>>>
 On Thursday, January 5, 2023 at 10:07:56 PM UTC-8 Tom B.C. Canada wrote:

> On Thursday, January 5, 2023 at 10:07:01 PM UTC-8 Tom B.C. Canada 
> wrote:
>
>> I don't think it's a 400 or 500.  the frame rails are 5 feet long.  
>> more pics
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/e74c9878-eabc-4441-90cd-830646adcbcfn%40googlegroups.com.

RE: old 900

I think I saw 2 lots of rails in one of the pics curt

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Friday, 6 January 2023 5:06 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: old 900

 

I think you are right Bill.

Both the tail and headstock look the same as the  500. Both the 5 and 600 ,Y 
axis did not have a screw adjustment.  But the page states the 600 has a MT2 
headstock.  almost no info on the 500.

Tom If you can give us some more photos. Your machine just give us a history 
lesson. on a Legacy we know very little about. 


500

   

2000

This is a model 500 according to the name plate on the machine. The owner is 
selling it as a Model 500 EXS. It's believed to have the same pitch 
capabilities as the earlier steel rail version but no information is available. 
The machine was offered for sale on Ebay in Nov 2012.


0EXL

   

2000-2002

Introduction of Aluminum rails. No y-axis screw. Single direction spirals.

*   2" thick by 8" wide flat stock
*   5 1/2" dia. by 40" round stock capacity
*   Spiral Pitches: 1/2", 1", 2", 3", 6" and .33" per rotation
*   #2MT headstock with 1" -8 tpi threads will utilize most standard lathe 
accessories
*   Precision machined, laser cut and stamped steel construction, Acrylic 
gears.
*   24" X 48" bench space required

 

 

Have a good night.

C.A.G.

 

On Friday, January 6, 2023 at 12:47:29 AM EST, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

Im thinking now after seeing 3 pics it might be a 500

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tom B.C. Canada
Sent: Friday, 6 January 2023 3:45 PM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: old 900

 

On Thursday, January 5, 2023 at 8:43:30 PM UTC-8 Tom B.C. Canada wrote:

whoops wrong picI tried sending 3 pics but it says the message was too long 
??

lets try another pic

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/3d5cfe83-d9c4-4167-8623-e274c813c42fn%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/003401d92192%2458a80b10%2409f82130%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1152722755.4454481.1672985181012%40mail.yahoo.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/005e01d92196%24bfaac0b0%243f004210%24%40mmnet.com.au.

RE: 3d printing

2023-01-05 Thread 'Curt George' via Legacy Ornamental Mills

Perhaps your right mike, but I still think I will play just for my self just to 
see what happens I will only report it here if they work

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Okla Mike (Liltwisted)
Sent: Friday, 6 January 2023 3:44 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: 3d printing

 

Tim Krause has made gears in the past for some special pitches.  We will never 
be in a position that we will have to rely on plastic gears.  But you know, 
they are making 3D metal printing more and more affordable.  

Mike OK

On 1/5/2023 10:31 PM, bulke...@mmnet.com.au   
wrote:

Me neither but if you had nothing else you would look at them, I’m not doing it 
for me it’s for the future 

Members who cant get gears anywhere one day also for experiment pitches and 
such 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
   
 
 On Behalf Of Tim Ziegler
Sent: Friday, 6 January 2023 3:14 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: 3d printing

 

LOL, don't let him scare you, he wants challenges with it I'm sure. 

We have a couple local guys with 3d printing too that I may have try some 
things. Not ready for plastic gears though.

 

Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Thu, Jan 5, 2023 at 9:03 PM mailto:bulke...@mmnet.com.au> > wrote:

My son bought a 3d printer yesterday he didn’t even have it out of the box and 
I dropped 4 gears

In front of him and said here print these to try it out for a start lol, the 
standard gears and the .25 gears 

He said gee dad I haven’t even got it working yet, never too early to start son 
lol I replied . unfortunately

The 2x gears are beyond the printers capacity ,I been wanting to see if legacy 
gears can be printed

for some time now if this works might be an easy answer if we cant get them 
anymore and hopefully 

considerably cheaper too after that top hats if Delrin wire is available that 
is if my son is still talking to me lol

 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000b01d9217b%247afd1280%2470f73780%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEnZ5Ay65ncQAhWRfJSX5wG_VR_HMdEyScZQixLHAmfbg%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001a01d92187%24bfc72020%243f556060%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/13a7c7ad-767d-b370-70a9-b44bca280940%40iglide.net
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to

Re: old 900

 I think you are right Bill.Both the tail and headstock look the same as the  
500. Both the 5 and 600 ,Y axis did not have a screw adjustment.  But the page 
states the 600 has a MT2 headstock.  almost no info on the 500.Tom If you can 
give us some more photos. Your machine just give us a history lesson. on a 
Legacy we know very little about. 
| 500 |  | 2000 | This is a model 500 according to the name plate on the 
machine. The owner is selling it as a Model 500 EXS. It's believed to have the 
same pitch capabilities as the earlier steel rail version but no information is 
available. The machine was offered for sale on Ebay in Nov 2012. |


| 0EXL |  | 2000-2002 | 
Introduction of Aluminum rails. No y-axis screw. Single direction spirals.
   
   - 2" thick by 8" wide flat stock
   - 5 1/2" dia. by 40" round stock capacity
   - Spiral Pitches: 1/2", 1", 2", 3", 6" and .33" per rotation
   - #2MT headstock with 1" -8 tpi threads will utilize most standard lathe 
accessories
   - Precision machined, laser cut and stamped steel construction, Acrylic 
gears.
   - 24" X 48" bench space required
  |


Have a good night.C.A.G.
On Friday, January 6, 2023 at 12:47:29 AM EST,  
wrote:  
 
 
Im thinking now after seeing 3 pics it might be a 500

  

Bill

  

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tom B.C. Canada
Sent: Friday, 6 January 2023 3:45 PM
To: Legacy Ornamental Mills 
Subject: Re: old 900

  

On Thursday, January 5, 2023 at 8:43:30 PM UTC-8 Tom B.C. Canada wrote:


whoops wrong picI tried sending 3 pics but it says the message was too long 
??

lets try another pic


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/3d5cfe83-d9c4-4167-8623-e274c813c42fn%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/003401d92192%2458a80b10%2409f82130%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1152722755.4454481.1672985181012%40mail.yahoo.com.

RE: old 900

Ok my last guess and I think the right one, after looking and looking I’m 
hoping it’s a 800EXL I’m sorry for so many guesses

I kept seeing something different with each pic. a pic of the overall mill 
might have made it a little  easier I think.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tom B.C. Canada
Sent: Friday, 6 January 2023 3:45 PM
To: Legacy Ornamental Mills 
Subject: Re: old 900

 

On Thursday, January 5, 2023 at 8:43:30 PM UTC-8 Tom B.C. Canada wrote:

whoops wrong picI tried sending 3 pics but it says the message was too long 
??

lets try another pic

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/3d5cfe83-d9c4-4167-8623-e274c813c42fn%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/004401d92194%24bdd01f30%2439705d90%24%40mmnet.com.au.

RE: old 900

My mistake sorry I meant a model 400

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tom B.C. Canada
Sent: Friday, 6 January 2023 3:45 PM
To: Legacy Ornamental Mills 
Subject: Re: old 900

 

On Thursday, January 5, 2023 at 8:43:30 PM UTC-8 Tom B.C. Canada wrote:

whoops wrong picI tried sending 3 pics but it says the message was too long 
??

lets try another pic

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/3d5cfe83-d9c4-4167-8623-e274c813c42fn%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/003901d92192%248c98b460%24a5ca1d20%24%40mmnet.com.au.

RE: old 900

Im thinking now after seeing 3 pics it might be a 500

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tom B.C. Canada
Sent: Friday, 6 January 2023 3:45 PM
To: Legacy Ornamental Mills 
Subject: Re: old 900

 

On Thursday, January 5, 2023 at 8:43:30 PM UTC-8 Tom B.C. Canada wrote:

whoops wrong picI tried sending 3 pics but it says the message was too long 
??

lets try another pic

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/3d5cfe83-d9c4-4167-8623-e274c813c42fn%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/003401d92192%2458a80b10%2409f82130%24%40mmnet.com.au.

RE: old 900

2023-01-05 Thread 'Curt George' via Legacy Ornamental Mills

It’s a little hard to tell from just one pic but I think maybe you have a model 
500 but im not sure

Have a look here https://ornamentalmills.com/history/index.html

and see your self if the 500 looks likes your mill

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tom B.C. Canada
Sent: Friday, 6 January 2023 3:41 PM
To: Legacy Ornamental Mills 
Subject: Re: old 900

 

Thank you Curt and Bill.

 

Maybe I don't have a 900, maybe it's another model ??

Curt I don't think your tail mod will work on this but I appreciate the pics.

There seems to be no provision for a Y scale so I'll have to improvise.

I'm thinking of doing major mods to this unit.  
Tom

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/d254cfc4-d4fe-4e6a-8fb8-dbe3daafc09an%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/002f01d92190%2406d91ec0%24148b5c40%24%40mmnet.com.au.

Re: old 900

Hello TomI have not seen your headstock and tail before on a Legacy.But I do
know/think that a De-sta-co push/pull clamp and a MT2 adaptor would work on
your tailstock if you choose to do so.Here is the link to my headstock mod.
https://ornamentalmills.com/turningaround/HeadStochBearings.htm (from the
original collection a few years back.)"When there is a will, There is Always a
way to make (or do) anything."How long is your machine? It looks very small.
C.A.G.
On Thursday, January 5, 2023 at 11:51:29 PM EST, Tom B.C. Canada
wrote:

On Thursday, January 5, 2023 at 8:43:30 PM UTC-8 Tom B.C. Canada wrote:

whoops wrong picI tried sending 3 pics but it says the message was too long
??lets try another pic

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/3d5cfe83-d9c4-4167-8623-e274c813c42fn%40googlegroups.com.

Re: old 900

from the pics over on  "history of orn mills"   it looks like a model 800.

On Thursday, January 5, 2023 at 8:44:48 PM UTC-8 Tom B.C. Canada wrote:

> On Thursday, January 5, 2023 at 8:43:30 PM UTC-8 Tom B.C. Canada wrote:
>
>> whoops wrong picI tried sending 3 pics but it says the message was 
>> too long ??
>> lets try another pic
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/dabbfebc-9a49-438e-949f-6cb5c715c840n%40googlegroups.com.

Re: Jeff Richmond's Bearing Tailstock conversion

Thank you Jeff.
I'm not sure what model I have.
I'll have to do some digging.

On Thursday, January 5, 2023 at 6:21:45 AM UTC-8 jtric...@gmail.com wrote:

> Tom, this was posted previously. 
>
> You may find it helpful. I have a 900 model as well with no stand. 
>
> Jeff from Connecticut 
> Sent from my iPhone
>
> Begin forwarded message:
>
> *From:* Tim Ziegler 
> *Date:* May 16, 2022 at 2:45:38 PM EDT
> *To:* LOM Group , Tim Ziegler <
> timjz...@gmail.com>
> *Subject:* *Jeff Richmond's Bearing Tailstock conversion*
> *Reply-To:* legacy-orna...@googlegroups.com
>
> 
>
> Hey Guys, 
> Jeff shared some pics to post on the forum and so I am forwarding them to 
> share.  this basically shows the process to change it out, and clean it. 
> So if any of you don't have a bearing tailstock it's rather easy to do. 
> Jeff ordered a WoodRiver Tailstock from WoodCraft for about $30.00, a 
> pretty cheap investment for the benefits this offer's. Much smoother 
> turning no out of round tailstock holes. 
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 <(320)%20294-5798> shop
> 320-630-2243 <(320)%20630-2243> cell
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFeKZBmVUDakkzeFzZAZtaydUmV1OEpc7OXCQMF%3DVmKoA%40mail.gmail.com
>  
> 
> .
> [image: Jeff's bearing replacement LOM 900.jpg][image: Jeff's bearing 
> replacement 2 LOM 900.jpg]
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/76792d0e-5733-4375-81aa-0def2d1e369en%40googlegroups.com.

RE: 3d printing

Me neither but if you had nothing else you would look at them, I’m not doing it 
for me it’s for the future 

Members who cant get gears anywhere one day also for experiment pitches and 
such 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Friday, 6 January 2023 3:14 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: 3d printing

 

LOL, don't let him scare you, he wants challenges with it I'm sure. 

We have a couple local guys with 3d printing too that I may have try some 
things. Not ready for plastic gears though.

 

Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Thu, Jan 5, 2023 at 9:03 PM mailto:bulke...@mmnet.com.au> > wrote:

My son bought a 3d printer yesterday he didn’t even have it out of the box and 
I dropped 4 gears

In front of him and said here print these to try it out for a start lol, the 
standard gears and the .25 gears 

He said gee dad I haven’t even got it working yet, never too early to start son 
lol I replied . unfortunately

The 2x gears are beyond the printers capacity ,I been wanting to see if legacy 
gears can be printed

for some time now if this works might be an easy answer if we cant get them 
anymore and hopefully 

considerably cheaper too after that top hats if Delrin wire is available that 
is if my son is still talking to me lol

 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000b01d9217b%247afd1280%2470f73780%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEnZ5Ay65ncQAhWRfJSX5wG_VR_HMdEyScZQixLHAmfbg%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001a01d92187%24bfc72020%243f556060%24%40mmnet.com.au.

Re: 3d printing

LOL, don't let him scare you, he wants challenges with it I'm sure.
We have a couple local guys with 3d printing too that I may have try some
things. Not ready for plastic gears though.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Jan 5, 2023 at 9:03 PM  wrote:

> My son bought a 3d printer yesterday he didn’t even have it out of the box
> and I dropped 4 gears
>
> In front of him and said here print these to try it out for a start lol,
> the standard gears and the .25 gears
>
> He said gee dad I haven’t even got it working yet, never too early to
> start son lol I replied . unfortunately
>
> The 2x gears are beyond the printers capacity ,I been wanting to see if
> legacy gears can be printed
>
> for some time now if this works might be an easy answer if we cant get
> them anymore and hopefully
>
> considerably cheaper too after that top hats if Delrin wire is available
> that is if my son is still talking to me lol
>
>
>
> Bill
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000b01d9217b%247afd1280%2470f73780%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEnZ5Ay65ncQAhWRfJSX5wG_VR_HMdEyScZQixLHAmfbg%40mail.gmail.com.

Re: z axis

yup Bill you're the master. I admire your work.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Jan 5, 2023 at 8:33 PM  wrote:

> Not me guys I don’t care what it is  I will try and machine it lol accept
> cnc stuff I’m totally lost
>
> when it comes to computerised stuff
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Friday, 6 January 2023 1:20 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: z axis
>
>
>
> yup  me too. Give me wood and I can do anything, metal or aluminum I'm
> heading to my Brothers lol
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Thu, Jan 5, 2023 at 10:20 AM 'Denson Ingram' via Legacy Ornamental
> Mills  wrote:
>
> Way above my abilities. Nice work
>
> Thanks Bill
>
> Denson
>
> Sent from Denson's iPhone
>
>
>
> On Jan 5, 2023, at 12:31 AM, bulke...@mmnet.com.au wrote:
>
> 
>
> I don’t mind curt its up to each member what they do most of them have
> been there for 6 years or more
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Thursday, 5 January 2023 5:05 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: z axis
>
>
>
> Awesome.
>
>
>
> Sorry about locking off your video's.  I think that's shaky ground.
>
>
>
> C.A.G.
>
>
>
> On Thursday, January 5, 2023 at 12:57:01 AM EST, 
> wrote:
>
>
>
>
>
> It was posted to the group
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Thursday, 5 January 2023 4:33 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: z axis
>
>
>
> I have seen this Z axis before. He was or still may be one of our group?
>
> Nice job. It looks Rock solid!
>
>
>
> Perhaps you could re-post this to our group and see what happen?
>
>
>
> C.A.G.
>
> On Wednesday, January 4, 2023 at 07:44:41 PM EST, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
>
>
>
> Wow that was entertaining. Some pretty serious Machining went into that.
> Even showed a Triton Router for you Bill.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Jan 4, 2023 at 3:37 PM  wrote:
>
> Here are some interesting pics I stumbled on
>
>
> https://www.routerforums.com/threads/fabricated-a-z-axis-on-legacy-ornamental-mill-model-1800.91969/#lg=thread-91969=1
>
>
>
> Bill
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000101d92084%24b87b98e0%242972caa0%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH%2BrWPB_Yrh3t6Ldpn1aXb156_V9ca4HqX6fZVoPbbmjQ%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/2136594340.4210475.1672896759307%40mail.yahoo.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001c01d920ca%2482d68600%2488839200%24%40mmnet.com.au
>

3d printing

My son bought a 3d printer yesterday he didn't even have it out of the box
and I dropped 4 gears

In front of him and said here print these to try it out for a start lol, the
standard gears and the .25 gears 

He said gee dad I haven't even got it working yet, never too early to start
son lol I replied . unfortunately

The 2x gears are beyond the printers capacity ,I been wanting to see if
legacy gears can be printed

for some time now if this works might be an easy answer if we cant get them
anymore and hopefully 

considerably cheaper too after that top hats if Delrin wire is available
that is if my son is still talking to me lol

 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000b01d9217b%247afd1280%2470f73780%24%40mmnet.com.au.

RE: z axis

Not me guys I don’t care what it is  I will try and machine it lol accept cnc 
stuff I’m totally lost

when it comes to computerised stuff

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Friday, 6 January 2023 1:20 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: z axis

 

yup  me too. Give me wood and I can do anything, metal or aluminum I'm heading 
to my Brothers lol


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Thu, Jan 5, 2023 at 10:20 AM 'Denson Ingram' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Way above my abilities. Nice work

Thanks Bill

Denson

Sent from Denson's iPhone





On Jan 5, 2023, at 12:31 AM, bulke...@mmnet.com.au 
  wrote:



I don’t mind curt its up to each member what they do most of them have been 
there for 6 years or more

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Thursday, 5 January 2023 5:05 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: z axis

 

Awesome.

 

Sorry about locking off your video's.  I think that's shaky ground.

 

C.A.G.

 

On Thursday, January 5, 2023 at 12:57:01 AM EST, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

It was posted to the group

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Thursday, 5 January 2023 4:33 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: z axis

 

I have seen this Z axis before. He was or still may be one of our group?

Nice job. It looks Rock solid!

 

Perhaps you could re-post this to our group and see what happen?

 

C.A.G.

On Wednesday, January 4, 2023 at 07:44:41 PM EST, Tim Ziegler 
mailto:timjzieg...@gmail.com> > wrote: 

 

 

Wow that was entertaining. Some pretty serious Machining went into that. Even 
showed a Triton Router for you Bill.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Jan 4, 2023 at 3:37 PM mailto:bulke...@mmnet.com.au> > wrote:

Here are some interesting pics I stumbled on

https://www.routerforums.com/threads/fabricated-a-z-axis-on-legacy-ornamental-mill-model-1800.91969/#lg=thread-91969
 

 =1

 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000101d92084%24b87b98e0%242972caa0%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH%2BrWPB_Yrh3t6Ldpn1aXb156_V9ca4HqX6fZVoPbbmjQ%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2136594340.4210475.1672896759307%40mail.yahoo.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit

Re: z axis

yup  me too. Give me wood and I can do anything, metal or aluminum I'm
heading to my Brothers lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Jan 5, 2023 at 10:20 AM 'Denson Ingram' via Legacy Ornamental Mills
 wrote:

> Way above my abilities. Nice work
> Thanks Bill
> Denson
>
> Sent from Denson's iPhone
>
> On Jan 5, 2023, at 12:31 AM, bulke...@mmnet.com.au wrote:
>
> 
>
> I don’t mind curt its up to each member what they do most of them have
> been there for 6 years or more
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Thursday, 5 January 2023 5:05 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: z axis
>
>
>
> Awesome.
>
>
>
> Sorry about locking off your video's.  I think that's shaky ground.
>
>
>
> C.A.G.
>
>
>
> On Thursday, January 5, 2023 at 12:57:01 AM EST, 
> wrote:
>
>
>
>
>
> It was posted to the group
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Thursday, 5 January 2023 4:33 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: z axis
>
>
>
> I have seen this Z axis before. He was or still may be one of our group?
>
> Nice job. It looks Rock solid!
>
>
>
> Perhaps you could re-post this to our group and see what happen?
>
>
>
> C.A.G.
>
> On Wednesday, January 4, 2023 at 07:44:41 PM EST, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
>
>
>
> Wow that was entertaining. Some pretty serious Machining went into that.
> Even showed a Triton Router for you Bill.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Jan 4, 2023 at 3:37 PM  wrote:
>
> Here are some interesting pics I stumbled on
>
>
> https://www.routerforums.com/threads/fabricated-a-z-axis-on-legacy-ornamental-mill-model-1800.91969/#lg=thread-91969=1
>
>
>
> Bill
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000101d92084%24b87b98e0%242972caa0%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH%2BrWPB_Yrh3t6Ldpn1aXb156_V9ca4HqX6fZVoPbbmjQ%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/2136594340.4210475.1672896759307%40mail.yahoo.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001c01d920ca%2482d68600%2488839200%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/746406986.4311058.1672898724706%40mail.yahoo.com
> 
> .
>
> --
> You received this message because

Re: z axis