date:20230626

RE: New live center for my 200

2023-06-26 Thread M.W.Foscue

Bill,

We mostly use "cycles" - but on rare occasion, you will see Hz.  On electric 
appliances, motors, etc. you will see one or the other.

As for voltage, I see our lower voltage mentioned as any of these: 110, 115, or 
120.
And I see our higher household voltage usually mentioned as either 220 or 240. 
(Never seen mention of 230v)

When I was growing up (very younger years) in the Panama Canal Zone - I 
remember we had 25 cycle electricity.  Not sure if it was 110v or something 
else.  Then one day they had a truck come thru the neighborhood - and families 
could swap out their "cycles sensitive" devices - like clocks - for new ones 
that ran on 60 cycles.  Strange, huh?

Mac
  -Original Message-
From: 
Sent: Jun 27, 2023 1:35 AM
To: 
Subject: RE: New live center for my 200

We use 240volt 50 cycles but we call cycles Hertz 
 
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Tuesday, June 27, 2023 2:41 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: New live center for my 200


Bill,
 
What juice (mains?) do you run in your house/shop?
Do you have 110 and 220; or only 220 like in Europe? 
Many "home shops" in America add 220v AC/60 cycles if they didn't already have 
it before outfitting their shop.
What cycle do you have - 50?  Or 60 - like here in America?
 
Thanks.
Mac



-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com)>
Sent: Jun 27, 2023 12:21 AM
To: mailto:legacy-ornamental-mills@googlegroups.com)>
Subject: RE: New live center for my 200

You need a gas generator curt like I have power outages I just start it up and 
keep on going
 
Bill


 From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com)> 
Sent: Tuesday, June 27, 2023 11:16 AM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com)>
Subject: New live center for my 200

Hello and good evening everyone.

 

Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday 
evening, which caused a power outage for me, The power was restored appx. 6pm 
today.  3 hours in the shop form me over a weekend is NOT normal, And I was 
having withdrawal systems. (Yes people my Feet hurt!  You see with out 
electricity the only way for me to spend my time at home is to walk our dog. We 
walked 10 miles today and even more yesterday.) ;-)

 

OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This 
weekend was Horrible! )  ;-p

 

Today's shop time was meant to turn some bone blanks that I got ready for 
turning last weekend. 

 

I did one turning, which turned out pretty good, but after switching form 
machines I noticed that the dead center on my 200 was wearing badly.

(Note: the 200 was meant to by turned by hand, the motor I use , is way more 
rotations then the dead center was meant to handle.)   

I found an old live center that I used on my pedal lathe, (see Bill web site. 
https://www.youtube.com/watch?v=gpAz-xgLynU )

The live center has a 1/2-24 thread that holds it onto the MT-1 shaft. knowing 
this I removed it form its shaft and used a fine thread bolt to mount it onto 
my 200.  It was a simple matter of drilling out the 3/8" hole that the old dead 
center used for its mountings and making it 1/2" then screwing the bolt onto 
and in the live center.

Over all this weekend was not a total lost cause. 

A new toy and bonding time with our puppy. ;-)

 

Have a good night everyone.

talk to you all more latter.

 

C.A.G.






-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/69fe5eff-6ed5-fb1f-b6ec-faff21655e83%40earthlink.net.

RE: New live center for my 200

2023-06-26 Thread bulkeley

We use 240volt 50 cycles but we call cycles Hertz 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Tuesday, June 27, 2023 2:41 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: New live center for my 200

 

Bill,

 

What juice (mains?) do you run in your house/shop?

Do you have 110 and 220; or only 220 like in Europe? 

Many "home shops" in America add 220v AC/60 cycles if they didn't already have 
it before outfitting their shop.

What cycle do you have - 50?  Or 60 - like here in America?

 

Thanks.

Mac

  _  

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Jun 27, 2023 12:21 AM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: New live center for my 200

 

You need a gas generator curt like I have power outages I just start it up and 
keep on going

 

Bill

  _  

  _  

 From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Tuesday, June 27, 2023 11:16 AM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: New live center for my 200

 

Hello and good evening everyone.

 

Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday 
evening, which caused a power outage for me, The power was restored appx. 6pm 
today.  3 hours in the shop form me over a weekend is NOT normal, And I was 
having withdrawal systems. (Yes people my Feet hurt!  You see with out 
electricity the only way for me to spend my time at home is to walk our dog. We 
walked 10 miles today and even more yesterday.) ;-)

 

OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This 
weekend was Horrible! )  ;-p

 

Today's shop time was meant to turn some bone blanks that I got ready for 
turning last weekend. 

 

I did one turning, which turned out pretty good, but after switching form 
machines I noticed that the dead center on my 200 was wearing badly.

(Note: the 200 was meant to by turned by hand, the motor I use , is way more 
rotations then the dead center was meant to handle.)   

I found an old live center that I used on my pedal lathe, (see Bill web site. 
https://www.youtube.com/watch?v=gpAz-xgLynU )

The live center has a 1/2-24 thread that holds it onto the MT-1 shaft. knowing 
this I removed it form its shaft and used a fine thread bolt to mount it onto 
my 200.  It was a simple matter of drilling out the 3/8" hole that the old dead 
center used for its mountings and making it 1/2" then screwing the bolt onto 
and in the live center.

Over all this weekend was not a total lost cause. 

A new toy and bonding time with our puppy. ;-)

 

Have a good night everyone.

talk to you all more latter.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1059378b-ed45-f0b4-47a2-4274a02414a7%40earthlink.net
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001201d9a8b9%241f6e9fe0%245e4bdfa0%24%40mmnet.com.au.

RE: New live center for my 200

2023-06-26 Thread bulkeley

Yea talk about bad timing

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Tuesday, June 27, 2023 2:29 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New live center for my 200

 

Thanks Bill. 

I own one (Mine is propane powered/not gasoline), but its in parts at this 
time. I had an oil leak and took it apart to repair the leak, Sadly, it looks 
like I had bad timing. ;-p

 

Have a good night.

 

C.A.G.

 

On Tuesday, June 27, 2023 at 12:21:18 AM EDT, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

You need a gas generator curt like I have power outages I just start it up and 
keep on going

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Tuesday, June 27, 2023 11:16 AM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: New live center for my 200

 

Hello and good evening everyone.

 

Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday 
evening, which caused a power outage for me, The power was restored appx. 6pm 
today.  3 hours in the shop form me over a weekend is NOT normal, And I was 
having withdrawal systems. (Yes people my Feet hurt!  You see with out 
electricity the only way for me to spend my time at home is to walk our dog. We 
walked 10 miles today and even more yesterday.) ;-)

 

OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This 
weekend was Horrible! )  ;-p

 

Today's shop time was meant to turn some bone blanks that I got ready for 
turning last weekend. 

 

I did one turning, which turned out pretty good, but after switching form 
machines I noticed that the dead center on my 200 was wearing badly.

(Note: the 200 was meant to by turned by hand, the motor I use , is way more 
rotations then the dead center was meant to handle.)   

I found an old live center that I used on my pedal lathe, (see Bill web site. 
https://www.youtube.com/watch?v=gpAz-xgLynU )

The live center has a 1/2-24 thread that holds it onto the MT-1 shaft. knowing 
this I removed it form its shaft and used a fine thread bolt to mount it onto 
my 200.  It was a simple matter of drilling out the 3/8" hole that the old dead 
center used for its mountings and making it 1/2" then screwing the bolt onto 
and in the live center.

Over all this weekend was not a total lost cause. 

A new toy and bonding time with our puppy. ;-)

 

Have a good night everyone.

talk to you all more latter.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000c01d9a8ae%24ca614b10%245f23e130%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/80131890.3056120.1687840159496%40mail.yahoo.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000b01d9a8b7%244ffe7ce0%24effb76a0%24%40mmnet.com.au.

RE: New live center for my 200

2023-06-26 Thread M.W.Foscue

Bill,

What juice (mains?) do you run in your house/shop?
Do you have 110 and 220; or only 220 like in Europe? 
Many "home shops" in America add 220v AC/60 cycles if they didn't already have 
it before outfitting their shop.
What cycle do you have - 50?  Or 60 - like here in America?

Thanks.
Mac
-Original Message-
From: 
Sent: Jun 27, 2023 12:21 AM
To: 
Subject: RE: New live center for my 200

You need a gas generator curt like I have power outages I just start it up and 
keep on going
 
Bill
 From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Tuesday, June 27, 2023 11:16 AM
To: Legacy ornamental mills 
Subject: New live center for my 200

Hello and good evening everyone.

 

Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday 
evening, which caused a power outage for me, The power was restored appx. 6pm 
today.  3 hours in the shop form me over a weekend is NOT normal, And I was 
having withdrawal systems. (Yes people my Feet hurt!  You see with out 
electricity the only way for me to spend my time at home is to walk our dog. We 
walked 10 miles today and even more yesterday.) ;-)

 

OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This 
weekend was Horrible! )  ;-p

 

Today's shop time was meant to turn some bone blanks that I got ready for 
turning last weekend. 

 

I did one turning, which turned out pretty good, but after switching form 
machines I noticed that the dead center on my 200 was wearing badly.

(Note: the 200 was meant to by turned by hand, the motor I use , is way more 
rotations then the dead center was meant to handle.)   

I found an old live center that I used on my pedal lathe, (see Bill web site. 
https://www.youtube.com/watch?v=gpAz-xgLynU )

The live center has a 1/2-24 thread that holds it onto the MT-1 shaft. knowing 
this I removed it form its shaft and used a fine thread bolt to mount it onto 
my 200.  It was a simple matter of drilling out the 3/8" hole that the old dead 
center used for its mountings and making it 1/2" then screwing the bolt onto 
and in the live center.

Over all this weekend was not a total lost cause. 

A new toy and bonding time with our puppy. ;-)

 

Have a good night everyone.

talk to you all more latter.

 

C.A.G.




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1059378b-ed45-f0b4-47a2-4274a02414a7%40earthlink.net.

Re: New live center for my 200

2023-06-26 Thread 'Curt George' via Legacy Ornamental Mills

 Thanks Bill. I own one (Mine is propane powered/not gasoline), but its in 
parts at this time. I had an oil leak and took it apart to repair the leak, 
Sadly, it looks like I had bad timing. ;-p
Have a good night.
C.A.G.
On Tuesday, June 27, 2023 at 12:21:18 AM EDT,  
wrote:  
 
 
You need a gas generator curt like I have power outages I just start it up and 
keep on going

  

Bill

  

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Tuesday, June 27, 2023 11:16 AM
To: Legacy ornamental mills 
Subject: New live center for my 200

  

Hello and good evening everyone.

  

Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday 
evening, which caused a power outage for me, The power was restored appx. 6pm 
today.  3 hours in the shop form me over a weekend is NOT normal, And I was 
having withdrawal systems. (Yes people my Feet hurt!  You see with out 
electricity the only way for me to spend my time at home is to walk our dog. We 
walked 10 miles today and even more yesterday.) ;-)

  

OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This 
weekend was Horrible! )  ;-p

  

Today's shop time was meant to turn some bone blanks that I got ready for 
turning last weekend. 

  

I did one turning, which turned out pretty good, but after switching form 
machines I noticed that the dead center on my 200 was wearing badly.

(Note: the 200 was meant to by turned by hand, the motor I use , is way more 
rotations then the dead center was meant to handle.)   

I found an old live center that I used on my pedal lathe, (see Bill web site. 
https://www.youtube.com/watch?v=gpAz-xgLynU )

The live center has a 1/2-24 thread that holds it onto the MT-1 shaft. knowing 
this I removed it form its shaft and used a fine thread bolt to mount it onto 
my 200.  It was a simple matter of drilling out the 3/8" hole that the old dead 
center used for its mountings and making it 1/2" then screwing the bolt onto 
and in the live center.

Over all this weekend was not a total lost cause. 

A new toy and bonding time with our puppy. ;-)

  

Have a good night everyone.

talk to you all more latter.

  

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000c01d9a8ae%24ca614b10%245f23e130%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/80131890.3056120.1687840159496%40mail.yahoo.com.

RE: New live center for my 200

2023-06-26 Thread bulkeley

You need a gas generator curt like I have power outages I just start it up and 
keep on going

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Tuesday, June 27, 2023 11:16 AM
To: Legacy ornamental mills 
Subject: New live center for my 200

 

Hello and good evening everyone.

 

Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday 
evening, which caused a power outage for me, The power was restored appx. 6pm 
today.  3 hours in the shop form me over a weekend is NOT normal, And I was 
having withdrawal systems. (Yes people my Feet hurt!  You see with out 
electricity the only way for me to spend my time at home is to walk our dog. We 
walked 10 miles today and even more yesterday.) ;-)

 

OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This 
weekend was Horrible! )  ;-p

 

Today's shop time was meant to turn some bone blanks that I got ready for 
turning last weekend. 

 

I did one turning, which turned out pretty good, but after switching form 
machines I noticed that the dead center on my 200 was wearing badly.

(Note: the 200 was meant to by turned by hand, the motor I use , is way more 
rotations then the dead center was meant to handle.)   

I found an old live center that I used on my pedal lathe, (see Bill web site. 
https://www.youtube.com/watch?v=gpAz-xgLynU )

The live center has a 1/2-24 thread that holds it onto the MT-1 shaft. knowing 
this I removed it form its shaft and used a fine thread bolt to mount it onto 
my 200.  It was a simple matter of drilling out the 3/8" hole that the old dead 
center used for its mountings and making it 1/2" then screwing the bolt onto 
and in the live center.

Over all this weekend was not a total lost cause. 

A new toy and bonding time with our puppy. ;-)

 

Have a good night everyone.

talk to you all more latter.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000c01d9a8ae%24ca614b10%245f23e130%24%40mmnet.com.au.

Re: New live center for my 200

2023-06-26 Thread Tim Ziegler

Thank you Curt, about time to hit the hay here.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Jun 26, 2023 at 10:09 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Thank you Tim.
>
> I hope you have a good night as well.
>
> C.A.G.
>
> On Monday, June 26, 2023 at 10:58:02 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Great stuff Curt, was good you posted a pic of your pedal lathe too. Many
> may have not seen that
> great innovation. bone turning was great too. Yeah a real bummer on the
> power going out , but at least you got
> a good pic of you and your dog.
> Keep smiling my Friend.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Mon, Jun 26, 2023 at 8:16 PM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> Hello and good evening everyone.
>
> Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday
> evening, which caused a power outage for me, The power was restored appx.
> 6pm today.  3 hours in the shop form me over a weekend is NOT normal, And I
> was having withdrawal systems. (Yes people my Feet hurt!  You see with out
> electricity the only way for me to spend my time at home is to walk our
> dog. We walked 10 miles today and even more yesterday.) ;-)
>
> OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This
> weekend was Horrible! )  ;-p
>
> Today's shop time was meant to turn some bone blanks that I got ready for
> turning last weekend.
>
> I did one turning, which turned out pretty good, but after switching form
> machines I noticed that the dead center on my 200 was wearing badly.
> (Note: the 200 was meant to by turned by hand, the motor I use , is way
> more rotations then the dead center was meant to handle.)
> I found an old live center that I used on my pedal lathe, (see Bill web
> site. https://www.youtube.com/watch?v=gpAz-xgLynU )
> The live center has a 1/2-24 thread that holds it onto the MT-1 shaft.
> knowing this I removed it form its shaft and used a fine thread bolt to
> mount it onto my 200.  It was a simple matter of drilling out the 3/8" hole
> that the old dead center used for its mountings and making it 1/2" then
> screwing the bolt onto and in the live center.
> Over all this weekend was not a total lost cause.
> A new toy and bonding time with our puppy. ;-)
>
> Have a good night everyone.
> talk to you all more latter.
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHJ5SLRNgqEVtR%2BChCJQq14hNYVezGeT%3DYOzSus0%2BEjsg%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/537993551.3115886.1687835365699%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGDJJxSLPG3BHJ97vGtbSXNJ0dVAjKhO1iMgwSkDYWgiA%40mail.gmail.com.

Re: New live center for my 200

2023-06-26 Thread 'Curt George' via Legacy Ornamental Mills

Thank you Tim.
I hope you have a good night as well.
C.A.G.
On Monday, June 26, 2023 at 10:58:02 PM EDT, Tim Ziegler
wrote:

Great stuff Curt, was good you posted a pic of your pedal lathe too. Many may
have not seen that great innovation. bone turning was great too. Yeah a real
bummer on the power going out , but at least you got a good pic of you and your
dog. Keep smiling my Friend.
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Mon, Jun 26, 2023 at 8:16 PM 'Curt George' via Legacy Ornamental Mills
wrote:

Hello and good evening everyone.
Sunday's and Mondays are my weekends. But sadly, We had a storm Saturday
evening, which caused a power outage for me, The power was restored appx. 6pm
today. 3 hours in the shop form me over a weekend is NOT normal, And I was
having withdrawal systems. (Yes people my Feet hurt! You see with out
electricity the only way for me to spend my time at home is to walk our dog. We
walked 10 miles today and even more yesterday.) ;-)
OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This
weekend was Horrible! ) ;-p
Today's shop time was meant to turn some bone blanks that I got ready for
turning last weekend.
I did one turning, which turned out pretty good, but after switching form
machines I noticed that the dead center on my 200 was wearing badly.(Note: the
200 was meant to by turned by hand, the motor I use , is way more rotations
then the dead center was meant to handle.) I found an old live center that I
used on my pedal lathe, (see Bill web site.
https://www.youtube.com/watch?v=gpAz-xgLynU )The live center has a 1/2-24
thread that holds it onto the MT-1 shaft. knowing this I removed it form its
shaft and used a fine thread bolt to mount it onto my 200. It was a simple
matter of drilling out the 3/8" hole that the old dead center used for its
mountings and making it 1/2" then screwing the bolt onto and in the live
center.Over all this weekend was not a total lost cause. A new toy and bonding
time with our puppy. ;-)
Have a good night everyone.talk to you all more latter.
C.A.G.

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com.

Re: New live center for my 200

2023-06-26 Thread Tim Ziegler

Great stuff Curt, was good you posted a pic of your pedal lathe too. Many
may have not seen that
great innovation. bone turning was great too. Yeah a real bummer on the
power going out , but at least you got
a good pic of you and your dog.
Keep smiling my Friend.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Jun 26, 2023 at 8:16 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello and good evening everyone.
>
> Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday
> evening, which caused a power outage for me, The power was restored appx.
> 6pm today.  3 hours in the shop form me over a weekend is NOT normal, And I
> was having withdrawal systems. (Yes people my Feet hurt!  You see with out
> electricity the only way for me to spend my time at home is to walk our
> dog. We walked 10 miles today and even more yesterday.) ;-)
>
> OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This
> weekend was Horrible! )  ;-p
>
> Today's shop time was meant to turn some bone blanks that I got ready for
> turning last weekend.
>
> I did one turning, which turned out pretty good, but after switching form
> machines I noticed that the dead center on my 200 was wearing badly.
> (Note: the 200 was meant to by turned by hand, the motor I use , is way
> more rotations then the dead center was meant to handle.)
> I found an old live center that I used on my pedal lathe, (see Bill web
> site. https://www.youtube.com/watch?v=gpAz-xgLynU )
> The live center has a 1/2-24 thread that holds it onto the MT-1 shaft.
> knowing this I removed it form its shaft and used a fine thread bolt to
> mount it onto my 200.  It was a simple matter of drilling out the 3/8" hole
> that the old dead center used for its mountings and making it 1/2" then
> screwing the bolt onto and in the live center.
> Over all this weekend was not a total lost cause.
> A new toy and bonding time with our puppy. ;-)
>
> Have a good night everyone.
> talk to you all more latter.
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHJ5SLRNgqEVtR%2BChCJQq14hNYVezGeT%3DYOzSus0%2BEjsg%40mail.gmail.com.

Re: wood lathe

2023-06-26 Thread Tim Ziegler

yeah one must be a bit careful, and common sense has to come into play for
sure.
I think I heard that story a time or two.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Jun 26, 2023 at 2:19 AM Dexter Bland  wrote:

> Your digital control comment reminds me of a story I read several years
> ago about a guy that bought a digital control lathe, set it up with a big
> chunk of wood, starts to turn it on, then turns to his son and says "lets
> put on our safety glasses". He starts the lathe not realizing the speed
> setting in 10x faster than he thought. The machine is so out of balance it
> starts walking across the floor, throws the chunk of wood thru the garage
> wall, falls over and unplugs itself. His son then says to his dad, "good
> thing we put on our safety glasses."!
>
> On Friday, June 23, 2023 at 9:31:33 AM UTC-5 Rick Hutley wrote:
>
>> I would add to Michael’s advice: get a digital lathe. The ability to
>> control the speed from a few revolutions (e.g. for sanding) to full speed
>> without having to stop and manually change bands makes turning so much
>> easier and more enjoyable.
>>
>> Rick
>>
>> On Jun 23, 2023, at 10:00, Tim Ziegler  wrote:
>>
>> 
>>
>> That's the exact lathe I got. PM4224B Great lathe and yes its a tank,
>> But absolutely everything you'd ever want and need in a lathe.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 <(320)%20294-5798> shop
>> 320-630-2243 <(320)%20630-2243> cell
>>
>>
>> On Fri, Jun 23, 2023 at 8:32 AM Owner  wrote:
>>
>>> Have been turning for 60 years there are more lathes manufactures and
>>> models out there than you can count, my advice is to buy the biggest and
>>> heaviest  one you can’t afford or you’ll regret it.
>>> For me my go to lathe is a Powermatic 4224B could’d be happier as
>>> there's nothing it can’t turn big or small it also has a built in vacuum
>>> chuck system and indexing.
>>> Mass is critical if your turning anything bigger than spindles.
>>> Some fellow club members have reported issues with Laguna electronics as
>>> has the local Woodcraft that sells them.
>>>
>>> Have a Jet 1220 VS with stand I’m will to sell for a reasonable price
>>> with many accessories I used to take on the road for demos but I no longer
>>> do that.
>>>
>>> Michael Kratky
>>> 119 Riverview Rd.,
>>> Northville, N.Y. 12134
>>>
>>> 518 863-2821 <(518)%20863-2821>
>>> text 518 207-7247 <(518)%20207-7247>
>>>
>>> Email;
>>> kra...@roadrunner.com
>>>
>>>
>>>
>>> On Jun 23, 2023, at 9:06 AM, Rick Hutley  wrote:
>>>
>>> This also rates Laguna in the top picks:
>>>
>>>   https://www.lathematters.com/best-wood-lathe/
>>>
>>> Rick
>>>
>>> On Jun 23, 2023, at 09:05, Rick Hutley  wrote:
>>>
>>> 
>>> I’ve done wood lathe turning for a number of years - not on a Laguna I’m
>>> afraid. However, I can tell you that Laguna have a very good reputation.
>>> You might also look at the Powermatic lathes.
>>>
>>> Rick
>>>
>>> On Jun 23, 2023, at 07:07, Tim Ziegler  wrote:
>>>
>>> 
>>> I have a call turning friend that just bought a Laguna for a replacement
>>> lathe.
>>> He turns everyday and said it runs super smooth and really likes it. Not
>>> sure what
>>> model he has but could find out.
>>> I'm a Power Matic guy so can only attest to his opinion, and if he likes
>>> a tool its got
>>> to be pretty good.
>>>
>>> Kind Regards,
>>>
>>> Timothy J. Ziegler
>>> Ziegler WoodWork & Specialty
>>> 14171 160th Ave.
>>> Foreston MN 56330
>>>
>>> 320-294-5798 <(320)%20294-5798> shop
>>> 320-630-2243 <(320)%20630-2243> cell
>>>
>>>
>>> On Fri, Jun 23, 2023 at 3:19 AM  wrote:
>>>
 Has anybody had any experience with a laguna wood lathe I am looking at
 different brands for a friend and laguna keeps coming up as a very good one
 looking for opinions



 Bill





 --
 You received this message because you are subscribed to the Google
 Groups "Legacy Ornamental Mills" group.
 To unsubscribe from this group and stop receiving emails from it, send
 an email to legacy-ornamental...@googlegroups.com.
 To view this discussion on the web visit
 https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d9a5ab%246ea72a20%244bf57e60%24%40mmnet.com.au
 
 .

>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental...@googlegroups.com.
>>> To view this discussion on the web visit
>>>

Re: wood lathe

2023-06-26 Thread Dexter Bland

Your digital control comment reminds me of a story I read several years ago 
about a guy that bought a digital control lathe, set it up with a big chunk 
of wood, starts to turn it on, then turns to his son and says "lets put on 
our safety glasses". He starts the lathe not realizing the speed setting in 
10x faster than he thought. The machine is so out of balance it starts 
walking across the floor, throws the chunk of wood thru the garage wall, 
falls over and unplugs itself. His son then says to his dad, "good thing we 
put on our safety glasses."!

On Friday, June 23, 2023 at 9:31:33 AM UTC-5 Rick Hutley wrote:

> I would add to Michael’s advice: get a digital lathe. The ability to 
> control the speed from a few revolutions (e.g. for sanding) to full speed 
> without having to stop and manually change bands makes turning so much 
> easier and more enjoyable.
>
> Rick
>
> On Jun 23, 2023, at 10:00, Tim Ziegler  wrote:
>
> 
>
> That's the exact lathe I got. PM4224B Great lathe and yes its a tank, 
> But absolutely everything you'd ever want and need in a lathe. 
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 <(320)%20294-5798> shop
> 320-630-2243 <(320)%20630-2243> cell
>
>
> On Fri, Jun 23, 2023 at 8:32 AM Owner  wrote:
>
>> Have been turning for 60 years there are more lathes manufactures and 
>> models out there than you can count, my advice is to buy the biggest and 
>> heaviest  one you can’t afford or you’ll regret it.
>> For me my go to lathe is a Powermatic 4224B could’d be happier as there's 
>> nothing it can’t turn big or small it also has a built in vacuum chuck 
>> system and indexing. 
>> Mass is critical if your turning anything bigger than spindles. 
>> Some fellow club members have reported issues with Laguna electronics as 
>> has the local Woodcraft that sells them.
>>
>> Have a Jet 1220 VS with stand I’m will to sell for a reasonable price 
>> with many accessories I used to take on the road for demos but I no longer 
>> do that.
>>
>> Michael Kratky
>> 119 Riverview Rd., 
>> Northville, N.Y. 12134
>>
>> 518 863-2821 <(518)%20863-2821>
>> text 518 207-7247 <(518)%20207-7247>
>>
>> Email;
>> kra...@roadrunner.com
>>
>>
>>
>> On Jun 23, 2023, at 9:06 AM, Rick Hutley  wrote:
>>
>> This also rates Laguna in the top picks:
>>
>>   https://www.lathematters.com/best-wood-lathe/
>>
>> Rick
>>
>> On Jun 23, 2023, at 09:05, Rick Hutley  wrote:
>>
>> 
>> I’ve done wood lathe turning for a number of years - not on a Laguna I’m 
>> afraid. However, I can tell you that Laguna have a very good reputation. 
>> You might also look at the Powermatic lathes.
>>
>> Rick
>>
>> On Jun 23, 2023, at 07:07, Tim Ziegler  wrote:
>>
>> 
>> I have a call turning friend that just bought a Laguna for a replacement 
>> lathe. 
>> He turns everyday and said it runs super smooth and really likes it. Not 
>> sure what 
>> model he has but could find out. 
>> I'm a Power Matic guy so can only attest to his opinion, and if he likes 
>> a tool its got 
>> to be pretty good. 
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 <(320)%20294-5798> shop
>> 320-630-2243 <(320)%20630-2243> cell
>>
>>
>> On Fri, Jun 23, 2023 at 3:19 AM  wrote:
>>
>>> Has anybody had any experience with a laguna wood lathe I am looking at 
>>> different brands for a friend and laguna keeps coming up as a very good one 
>>> looking for opinions
>>>
>>>  
>>>
>>> Bill
>>>
>>>  
>>>
>>>  
>>>
>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to legacy-ornamental...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d9a5ab%246ea72a20%244bf57e60%24%40mmnet.com.au
>>>  
>>> 
>>> .
>>>
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHVJaNEkGE%3DudkVVMDqdh1JFLropLDcVaXgj5fPNOPeMA%40mail.gmail.com
>>  
>> 
>> .
>>
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to

RE: New live center for my 200

RE: New live center for my 200

RE: New live center for my 200

RE: New live center for my 200

Re: New live center for my 200

RE: New live center for my 200

Re: New live center for my 200

Re: New live center for my 200

Re: New live center for my 200

Re: wood lathe

Re: wood lathe

11 matches

Site Navigation

Mail list logo

Footer information