subject:"Barn find Revo"

Re: Barn find Revo

2020-12-23 Thread Richard Ellis

Hi Mac, I don't know where the tractor is now >.. Revo !! However I know 
the brafield bodger reads this forum. So he can possible sell it to you. 
Get a pic of it first though and whats with it.
Tractors ,, I have had all sorts Cat D8 and Terex loading shovels  If I 
needed one for a particular job  LOGGING and LAND CLEARANCE. all bought 
secondhand When I first started the price for an old model :U or M was 
about £20 . now they would fetch about £3000 plus.
I think my email is shown on this site so if you need more info. don't 
hesitate to contact me
All the best for Xmas to all the members
Richard

On Tuesday, December 22, 2020 at 6:16:25 PM UTC Va Oak wrote:

> Tim,
> Have Richard arrange to pick up that "salvage case" Revo he knows about 
> and get him to "deliver" it to you in Minnie-soda using an old, restored 
> Ferrari Mini Articulating Tractor.  LoL!
> Mac
> --
>
> -Original Message- 
> From: Tim Ziegler 
> Sent: Dec 22, 2020 1:09 PM 
> To: legacy-orna...@googlegroups.com 
> Subject: Re: Barn find Revo 
>
> Thanks ok Richard, it helps us get to know each other a little. 
> We can bring the subject back. It all started with restoration of an LOM 
> so here we are right. 
>
> I do want to find a Revo as I mentioned earlier on too. 
>
> Kind Regards,
>
> Timothy J. Ziegler
> --
> On Tue, Dec 22, 2020 at 7:38 AM Richard Ellis  wrote:
>
>> Hi
>> The only pic of the little Ferrari tractor that I have is.A copy of my 
>> avatar on my VW Camper forum.I have taken a pic of it. but can't paste drag 
>> and drop.If Anyone wants to see it please email me.
>> Sorry to get too far off the Legacy chat
>> Richard
>> --
>>
>> On Tuesday, December 22, 2020 at 11:43:31 AM UTC timjz...@gmail.com 
>> wrote:
>>
>>> They showed an articulating on the web. It looked pretty cool must have 
>>> been close the one you may have had?
>>>
>>> Kind Regards,
>>>
>>> Timothy J. Ziegler
>>> --
>>> On Tue, Dec 22, 2020 at 3:35 AM Richard Ellis  
>>> wrote:
>>>
>>>> Hi Mac
>>>> Mine was an older model it was articulated , had a small hydraulic ram 
>>>> to make it pivot in the middle. As far as I can remember a strange gear 
>>>> set 
>>>> up.
>>>> Richard
>>>> --
>>>> On Monday, December 21, 2020 at 7:00:38 PM UTC Va Oak wrote:
>>>>
>>>>> Richard,
>>>>> Thanks.  I did that, and never could find one called "Artic".
>>>>> Saw a fair number of Ferrari "mini" tractors - but most seemed to be 
>>>>> somewhat "modern" - so figured they must be newer models - not one you 
>>>>> were 
>>>>> referring to.
>>>>> Mac
>>>>> --
>>>>>
>>>>> -Original Message- 
>>>>> From: Richard Ellis 
>>>>> Sent: Dec 21, 2020 1:53 PM 
>>>>> To: Legacy Ornamental Mills 
>>>>> Subject: Re: Barn find Revo 
>>>>>
>>>>> Mac
>>>>> If you just type  Ferrari tractors in google search . It was only 
>>>>> about 4 foot high. I used it to tow a small grass mower.
>>>>> Richard
>>>>> --
>>>>>
>>>>> On Monday, December 21, 2020 at 6:36:51 PM UTC Va Oak wrote:
>>>>>
>>>>>> Richard,
>>>>>> I can't find a "Ferrari mini artic" tractor on the internet.
>>>>>> Can you provide a link to pics or a site that shows one?
>>>>>> Sounds interesting.   Thanks.
>>>>>> Mac
>>>>>> --
>>>>>>
>>>>>> -Original Message- 
>>>>>> From: Richard Ellis 
>>>>>> Sent: Dec 21, 2020 3:47 AM 
>>>>>> To: Legacy Ornamental Mills 
>>>>>> Subject: Re: Barn find Revo 
>>>>>>
>>>>>> Thanks for the replies ,He wants a working Revo. And I don't want any 
>>>>>> parts. Tim talking tractors ,I have had Allis -Chalmers model "U" and 
>>>>>> "M" 
>>>>>> good old work horses Also Cletrac crawlers,, Minneapolis Moline .And 
>>>>>> even a 
>>>>>> Ferrari mini

Re: Barn find Revo

2020-12-22 Thread Tim Ziegler

well that sounds about as fast as the slow boat to china right. LOL
I think I want a little better unit my self lol.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Dec 22, 2020 at 12:16 PM M.W.Foscue  wrote:

> Tim,
> Have Richard arrange to pick up that "salvage case" Revo he knows about
> and get him to "deliver" it to you in Minnie-soda using an old, restored
> Ferrari Mini Articulating Tractor.  LoL!
> Mac
> --
>
> -Original Message-
> From: Tim Ziegler
> Sent: Dec 22, 2020 1:09 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Barn find Revo
>
> Thanks ok Richard, it helps us get to know each other a little.
> We can bring the subject back. It all started with restoration of an LOM
> so here we are right.
>
> I do want to find a Revo as I mentioned earlier on too.
>
> Kind Regards,
>
> Timothy J. Ziegler
> --
> On Tue, Dec 22, 2020 at 7:38 AM Richard Ellis 
> wrote:
>
>> Hi
>> The only pic of the little Ferrari tractor that I have is.A copy of my
>> avatar on my VW Camper forum.I have taken a pic of it. but can't paste drag
>> and drop.If Anyone wants to see it please email me.
>> Sorry to get too far off the Legacy chat
>> Richard
>> --
>>
>> On Tuesday, December 22, 2020 at 11:43:31 AM UTC timjz...@gmail.com
>> wrote:
>>
>>> They showed an articulating on the web. It looked pretty cool must have
>>> been close the one you may have had?
>>>
>>> Kind Regards,
>>>
>>> Timothy J. Ziegler
>>> --
>>> On Tue, Dec 22, 2020 at 3:35 AM Richard Ellis 
>>> wrote:
>>>
>>>> Hi Mac
>>>> Mine was an older model it was articulated , had a small hydraulic ram
>>>> to make it pivot in the middle. As far as I can remember a strange gear set
>>>> up.
>>>> Richard
>>>> --
>>>> On Monday, December 21, 2020 at 7:00:38 PM UTC Va Oak wrote:
>>>>
>>>>> Richard,
>>>>> Thanks.  I did that, and never could find one called "Artic".
>>>>> Saw a fair number of Ferrari "mini" tractors - but most seemed to be
>>>>> somewhat "modern" - so figured they must be newer models - not one you 
>>>>> were
>>>>> referring to.
>>>>> Mac
>>>>> --
>>>>>
>>>>> -Original Message-
>>>>> From: Richard Ellis
>>>>> Sent: Dec 21, 2020 1:53 PM
>>>>> To: Legacy Ornamental Mills
>>>>> Subject: Re: Barn find Revo
>>>>>
>>>>> Mac
>>>>> If you just type  Ferrari tractors in google search . It was only
>>>>> about 4 foot high. I used it to tow a small grass mower.
>>>>> Richard
>>>>> --
>>>>>
>>>>> On Monday, December 21, 2020 at 6:36:51 PM UTC Va Oak wrote:
>>>>>
>>>>>> Richard,
>>>>>> I can't find a "Ferrari mini artic" tractor on the internet.
>>>>>> Can you provide a link to pics or a site that shows one?
>>>>>> Sounds interesting.   Thanks.
>>>>>> Mac
>>>>>> --
>>>>>>
>>>>>> -Original Message-
>>>>>> From: Richard Ellis
>>>>>> Sent: Dec 21, 2020 3:47 AM
>>>>>> To: Legacy Ornamental Mills
>>>>>> Subject: Re: Barn find Revo
>>>>>>
>>>>>> Thanks for the replies ,He wants a working Revo. And I don't want any
>>>>>> parts. Tim talking tractors ,I have had Allis -Chalmers model "U" and "M"
>>>>>> good old work horses Also Cletrac crawlers,, Minneapolis Moline .And 
>>>>>> even a
>>>>>> Ferrari mini artic. plus loads of others . How I wish I had kept them all
>>>>>> !! I would have been a millionaire
>>>>>> I will tell my friend   to offer £100
>>>>>> Richard
>>>>>> --
>>>>>>
>>>>>> On Sunday, December 20, 2020 at 3:20:48 PM UTC timjz...@gmail.com
>>>>>> wrote:
>>&

Re: Barn find Revo

2020-12-22 Thread M.W.Foscue

Richard,Yes - I'd like to see the pic of your "Ferrari".Thanks - and I wish you a Very Merry Christmas & a Safe, Healthy, and Happy New Year.Mac-Original Message-
From: Richard Ellis 
Sent: Dec 22, 2020 8:38 AM
To: Legacy Ornamental Mills 
Subject: Re: Barn find Revo

HiThe only pic of the little Ferrari tractor that I have is.A copy of my avatar on my VW Camper forum.I have taken a pic of it. but can't paste drag and drop.If Anyone wants to see it please email me.Sorry to get too far off the Legacy chatRichardOn Tuesday, December 22, 2020 at 11:43:31 AM UTC timjz...@gmail.com wrote:They showed an articulating on the web. It looked pretty cool must have been close the one you may have had?Kind Regards,Timothy J. ZieglerOn Tue, Dec 22, 2020 at 3:35 AM Richard Ellis <rchrd@gmail.com> wrote:Hi MacMine was an older model it was articulated , had a small hydraulic ram to make it pivot in the middle. As far as I can remember a strange gear set up.RichardOn Monday, December 21, 2020 at 7:00:38 PM UTC Va Oak wrote:Richard,Thanks.  I did that, and never could find one called "Artic".Saw a fair number of Ferrari "mini" tractors - but most seemed to be somewhat "modern" - so figured they must be newer models - not one you were referring to.Mac-Original Message-
From: Richard Ellis 
Sent: Dec 21, 2020 1:53 PM
To: Legacy Ornamental Mills 
Subject: Re: Barn find Revo

MacIf you just type  Ferrari tractors in google search . It was only about 4 foot high. I used it to tow a small grass mower.RichardOn Monday, December 21, 2020 at 6:36:51 PM UTC Va Oak wrote:Richard,I can't find a "Ferrari mini artic" tractor on the internet.Can you provide a link to pics or a site that shows one?Sounds interesting.   Thanks.Mac-Original Message-
From: Richard Ellis 
Sent: Dec 21, 2020 3:47 AM
To: Legacy Ornamental Mills 
Subject: Re: Barn find Revo

Thanks for the replies ,He wants a working Revo. And I don't want any parts. Tim talking tractors ,I have had Allis -Chalmers model "U" and "M" good old work horses Also Cletrac crawlers,, Minneapolis Moline .And even a Ferrari mini artic. plus loads of others . How I wish I had kept them all !! I would have been a millionaireI will tell my friend   to offer £100RichardOn Sunday, December 20, 2020 at 3:20:48 PM UTC timjz...@gmail.com wrote:Any LOM is a good LOM. it's like restoration of an old OLIVER tractor. It's all worth it in the end. Keep the heritage alive even it's only for partsOn Sun, Dec 20, 2020, 9:05 AM 'Curt George' via Legacy Ornamental Mills <legacy-orna...@googlegroups.com> wrote:
Are you sure that lead screw is ruined? If its in as bad shape as you state. offer a few bucks for it. Out side the leadscrew and gears the hole machine only has $30.00 worth of scrap metal in it. If you can get it, a little TLC (Tender Loving Care.) I know you can get it working again.I wish you luck on this one.  In the worst case... if you pick it up. there are some parts in the machine that others (or your self) who could use with your Legacy.Good luck.C.A.G.

On Sunday, December 20, 2020, 05:47:50 AM EST, Richard Ellis <rchrd@gmail.com> wrote:

I have a good friend who wants a REVO  I know where there is one, in an old barn, but in a very sad state. It is very rusty and has been for a long while. It has a rotary table laying on the floor along with other Revo stuff. It also has a plate holder on the front with a few cutters  in it They are also very very rusty. I don't think This sad Revo has  been used for about six or more years.Now my question !!! What is a sensible offer ,bearing in mind the leadscrew is ruined. And spares are not available here in the U,K, It will need  a lot of work to restore it to a good condition.Richard U.K.

-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1339032456.4115.1608662964047%40wamui-gaston.atl.sa.earthlink.net.

Re: Barn find Revo

2020-12-22 Thread M.W.Foscue

Tim,Have Richard arrange to pick up that "salvage case" Revo he knows about and get him to "deliver" it to you in Minnie-soda using an old, restored Ferrari Mini Articulating Tractor.  LoL!Mac-Original Message-
From: Tim Ziegler 
Sent: Dec 22, 2020 1:09 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Barn find Revo

Thanks ok Richard, it helps us get to know each other a little. We can bring the subject back. It all started with restoration of an LOM so here we are right. I do want to find a Revo as I mentioned earlier on too. Kind Regards,Timothy J. ZieglerOn Tue, Dec 22, 2020 at 7:38 AM Richard Ellis <rchrd.ell...@gmail.com> wrote:HiThe only pic of the little Ferrari tractor that I have is.A copy of my avatar on my VW Camper forum.I have taken a pic of it. but can't paste drag and drop.If Anyone wants to see it please email me.Sorry to get too far off the Legacy chatRichardOn Tuesday, December 22, 2020 at 11:43:31 AM UTC timjz...@gmail.com wrote:They showed an articulating on the web. It looked pretty cool must have been close the one you may have had?Kind Regards,Timothy J. ZieglerOn Tue, Dec 22, 2020 at 3:35 AM Richard Ellis <rchrd@gmail.com> wrote:Hi MacMine was an older model it was articulated , had a small hydraulic ram to make it pivot in the middle. As far as I can remember a strange gear set up.RichardOn Monday, December 21, 2020 at 7:00:38 PM UTC Va Oak wrote:Richard,Thanks.  I did that, and never could find one called "Artic".Saw a fair number of Ferrari "mini" tractors - but most seemed to be somewhat "modern" - so figured they must be newer models - not one you were referring to.Mac-Original Message-
From: Richard Ellis 
Sent: Dec 21, 2020 1:53 PM
To: Legacy Ornamental Mills 
Subject: Re: Barn find Revo

MacIf you just type  Ferrari tractors in google search . It was only about 4 foot high. I used it to tow a small grass mower.RichardOn Monday, December 21, 2020 at 6:36:51 PM UTC Va Oak wrote:Richard,I can't find a "Ferrari mini artic" tractor on the internet.Can you provide a link to pics or a site that shows one?Sounds interesting.   Thanks.Mac-Original Message-
From: Richard Ellis 
Sent: Dec 21, 2020 3:47 AM
To: Legacy Ornamental Mills 
Subject: Re: Barn find Revo

Thanks for the replies ,He wants a working Revo. And I don't want any parts. Tim talking tractors ,I have had Allis -Chalmers model "U" and "M" good old work horses Also Cletrac crawlers,, Minneapolis Moline .And even a Ferrari mini artic. plus loads of others . How I wish I had kept them all !! I would have been a millionaireI will tell my friend   to offer £100RichardOn Sunday, December 20, 2020 at 3:20:48 PM UTC timjz...@gmail.com wrote:Any LOM is a good LOM. it's like restoration of an old OLIVER tractor. It's all worth it in the end. Keep the heritage alive even it's only for partsOn Sun, Dec 20, 2020, 9:05 AM 'Curt George' via Legacy Ornamental Mills <legacy-orna...@googlegroups.com> wrote:
Are you sure that lead screw is ruined? If its in as bad shape as you state. offer a few bucks for it. Out side the leadscrew and gears the hole machine only has $30.00 worth of scrap metal in it. If you can get it, a little TLC (Tender Loving Care.) I know you can get it working again.I wish you luck on this one.  In the worst case... if you pick it up. there are some parts in the machine that others (or your self) who could use with your Legacy.Good luck.C.A.G.

On Sunday, December 20, 2020, 05:47:50 AM EST, Richard Ellis <rchrd@gmail.com> wrote:

I have a good friend who wants a REVO  I know where there is one, in an old barn, but in a very sad state. It is very rusty and has been for a long while. It has a rotary table laying on the floor along with other Revo stuff. It also has a plate holder on the front with a few cutters  in it They are also very very rusty. I don't think This sad Revo has  been used for about six or more years.Now my question !!! What is a sensible offer ,bearing in mind the leadscrew is ruined. And spares are not available here in the U,K, It will need  a lot of work to restore it to a good condition.Richard U.K.

-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2095734714.3699.1608660983290%40wamui-gaston.atl.sa.earthlink.net.

Re: Barn find Revo

2020-12-22 Thread Tim Ziegler

Thanks ok Richard, it helps us get to know each other a little.
We can bring the subject back. It all started with restoration of an LOM so
here we are right.

I do want to find a Revo as I mentioned earlier on too.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Dec 22, 2020 at 7:38 AM Richard Ellis 
wrote:

> Hi
> The only pic of the little Ferrari tractor that I have is.A copy of my
> avatar on my VW Camper forum.I have taken a pic of it. but can't paste drag
> and drop.If Anyone wants to see it please email me.
> Sorry to get too far off the Legacy chat
> Richard
>
> On Tuesday, December 22, 2020 at 11:43:31 AM UTC timjz...@gmail.com wrote:
>
>> They showed an articulating on the web. It looked pretty cool must have
>> been close the one you may have had?
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 <(320)%20294-5798> shop
>> 320-630-2243 <(320)%20630-2243> cell
>>
>>
>> On Tue, Dec 22, 2020 at 3:35 AM Richard Ellis 
>> wrote:
>>
>>> Hi Mac
>>> Mine was an older model it was articulated , had a small hydraulic ram
>>> to make it pivot in the middle. As far as I can remember a strange gear set
>>> up.
>>> Richard
>>>
>>> On Monday, December 21, 2020 at 7:00:38 PM UTC Va Oak wrote:
>>>
>>>> Richard,
>>>> Thanks.  I did that, and never could find one called "Artic".
>>>> Saw a fair number of Ferrari "mini" tractors - but most seemed to be
>>>> somewhat "modern" - so figured they must be newer models - not one you were
>>>> referring to.
>>>> Mac
>>>> --
>>>>
>>>> -Original Message-
>>>> From: Richard Ellis
>>>> Sent: Dec 21, 2020 1:53 PM
>>>> To: Legacy Ornamental Mills
>>>> Subject: Re: Barn find Revo
>>>>
>>>> Mac
>>>> If you just type  Ferrari tractors in google search . It was only about
>>>> 4 foot high. I used it to tow a small grass mower.
>>>> Richard
>>>> ------
>>>>
>>>> On Monday, December 21, 2020 at 6:36:51 PM UTC Va Oak wrote:
>>>>
>>>>> Richard,
>>>>> I can't find a "Ferrari mini artic" tractor on the internet.
>>>>> Can you provide a link to pics or a site that shows one?
>>>>> Sounds interesting.   Thanks.
>>>>> Mac
>>>>> --
>>>>>
>>>>> -Original Message-
>>>>> From: Richard Ellis
>>>>> Sent: Dec 21, 2020 3:47 AM
>>>>> To: Legacy Ornamental Mills
>>>>> Subject: Re: Barn find Revo
>>>>>
>>>>> Thanks for the replies ,He wants a working Revo. And I don't want any
>>>>> parts. Tim talking tractors ,I have had Allis -Chalmers model "U" and "M"
>>>>> good old work horses Also Cletrac crawlers,, Minneapolis Moline .And even 
>>>>> a
>>>>> Ferrari mini artic. plus loads of others . How I wish I had kept them all
>>>>> !! I would have been a millionaire
>>>>> I will tell my friend   to offer £100
>>>>> Richard
>>>>> --
>>>>>
>>>>> On Sunday, December 20, 2020 at 3:20:48 PM UTC timjz...@gmail.com
>>>>> wrote:
>>>>>
>>>>>> Any LOM is a good LOM. it's like restoration of an old OLIVER
>>>>>> tractor. It's all worth it in the end. Keep the heritage alive even it's
>>>>>> only for parts
>>>>>> --
>>>>>>
>>>>>> On Sun, Dec 20, 2020, 9:05 AM 'Curt George' via Legacy Ornamental
>>>>>> Mills  wrote:
>>>>>>
>>>>>>> Are you sure that lead screw is ruined?
>>>>>>>
>>>>>>> If its in as bad shape as you state. offer a few bucks for it. Out
>>>>>>> side the leadscrew and gears the hole machine only has $30.00 worth of
>>>>>>> scrap metal in it. If you can get it, a little TLC (Tender Loving 
>>>>>>> Care.) I
>>>>>>> know you can ge

Re: Barn find Revo

2020-12-22 Thread Richard Ellis

Hi
The only pic of the little Ferrari tractor that I have is.A copy of my 
avatar on my VW Camper forum.I have taken a pic of it. but can't paste drag 
and drop.If Anyone wants to see it please email me.
Sorry to get too far off the Legacy chat
Richard

On Tuesday, December 22, 2020 at 11:43:31 AM UTC timjz...@gmail.com wrote:

> They showed an articulating on the web. It looked pretty cool must have 
> been close the one you may have had?
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 <(320)%20294-5798> shop
> 320-630-2243 <(320)%20630-2243> cell
>
>
> On Tue, Dec 22, 2020 at 3:35 AM Richard Ellis  wrote:
>
>> Hi Mac
>> Mine was an older model it was articulated , had a small hydraulic ram to 
>> make it pivot in the middle. As far as I can remember a strange gear set up.
>> Richard
>>
>> On Monday, December 21, 2020 at 7:00:38 PM UTC Va Oak wrote:
>>
>>> Richard,
>>> Thanks.  I did that, and never could find one called "Artic".
>>> Saw a fair number of Ferrari "mini" tractors - but most seemed to be 
>>> somewhat "modern" - so figured they must be newer models - not one you were 
>>> referring to.
>>> Mac
>>> --
>>>
>>> -Original Message- 
>>> From: Richard Ellis 
>>> Sent: Dec 21, 2020 1:53 PM 
>>> To: Legacy Ornamental Mills 
>>> Subject: Re: Barn find Revo 
>>>
>>> Mac
>>> If you just type  Ferrari tractors in google search . It was only about 
>>> 4 foot high. I used it to tow a small grass mower.
>>> Richard
>>> --
>>>
>>> On Monday, December 21, 2020 at 6:36:51 PM UTC Va Oak wrote:
>>>
>>>> Richard,
>>>> I can't find a "Ferrari mini artic" tractor on the internet.
>>>> Can you provide a link to pics or a site that shows one?
>>>> Sounds interesting.   Thanks.
>>>> Mac
>>>> --
>>>>
>>>> -Original Message- 
>>>> From: Richard Ellis 
>>>> Sent: Dec 21, 2020 3:47 AM 
>>>> To: Legacy Ornamental Mills 
>>>> Subject: Re: Barn find Revo 
>>>>
>>>> Thanks for the replies ,He wants a working Revo. And I don't want any 
>>>> parts. Tim talking tractors ,I have had Allis -Chalmers model "U" and "M" 
>>>> good old work horses Also Cletrac crawlers,, Minneapolis Moline .And even 
>>>> a 
>>>> Ferrari mini artic. plus loads of others . How I wish I had kept them all 
>>>> !! I would have been a millionaire
>>>> I will tell my friend   to offer £100
>>>> Richard
>>>> --
>>>>
>>>> On Sunday, December 20, 2020 at 3:20:48 PM UTC timjz...@gmail.com 
>>>> wrote:
>>>>
>>>>> Any LOM is a good LOM. it's like restoration of an old OLIVER tractor. 
>>>>> It's all worth it in the end. Keep the heritage alive even it's only for 
>>>>> parts
>>>>> --
>>>>>
>>>>> On Sun, Dec 20, 2020, 9:05 AM 'Curt George' via Legacy Ornamental 
>>>>> Mills  wrote:
>>>>>
>>>>>> Are you sure that lead screw is ruined? 
>>>>>>
>>>>>> If its in as bad shape as you state. offer a few bucks for it. Out 
>>>>>> side the leadscrew and gears the hole machine only has $30.00 worth of 
>>>>>> scrap metal in it. If you can get it, a little TLC (Tender Loving Care.) 
>>>>>> I 
>>>>>> know you can get it working again.
>>>>>> I wish you luck on this one.  In the worst case... if you pick it up. 
>>>>>> there are some parts in the machine that others (or your self) who could 
>>>>>> use with your Legacy.
>>>>>>
>>>>>> Good luck.
>>>>>> C.A.G.
>>>>>> --
>>>>>> On Sunday, December 20, 2020, 05:47:50 AM EST, Richard Ellis <
>>>>>> rchrd@gmail.com> wrote: 
>>>>>>
>>>>>> I have a good friend who wants a REVO  I know where there is one, in 
>>>>>> an old barn, but in a very sad state. It is very rusty and has been for 
>>>&

Re: Barn find Revo

2020-12-22 Thread Tim Ziegler

They showed an articulating on the web. It looked pretty cool must have
been close the one you may have had?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Dec 22, 2020 at 3:35 AM Richard Ellis 
wrote:

> Hi Mac
> Mine was an older model it was articulated , had a small hydraulic ram to
> make it pivot in the middle. As far as I can remember a strange gear set up.
> Richard
>
> On Monday, December 21, 2020 at 7:00:38 PM UTC Va Oak wrote:
>
>> Richard,
>> Thanks.  I did that, and never could find one called "Artic".
>> Saw a fair number of Ferrari "mini" tractors - but most seemed to be
>> somewhat "modern" - so figured they must be newer models - not one you were
>> referring to.
>> Mac
>> --
>>
>> -Original Message-----
>> From: Richard Ellis
>> Sent: Dec 21, 2020 1:53 PM
>> To: Legacy Ornamental Mills
>> Subject: Re: Barn find Revo
>>
>> Mac
>> If you just type  Ferrari tractors in google search . It was only about 4
>> foot high. I used it to tow a small grass mower.
>> Richard
>> --
>>
>> On Monday, December 21, 2020 at 6:36:51 PM UTC Va Oak wrote:
>>
>>> Richard,
>>> I can't find a "Ferrari mini artic" tractor on the internet.
>>> Can you provide a link to pics or a site that shows one?
>>> Sounds interesting.   Thanks.
>>> Mac
>>> --
>>>
>>> -Original Message-
>>> From: Richard Ellis
>>> Sent: Dec 21, 2020 3:47 AM
>>> To: Legacy Ornamental Mills
>>> Subject: Re: Barn find Revo
>>>
>>> Thanks for the replies ,He wants a working Revo. And I don't want any
>>> parts. Tim talking tractors ,I have had Allis -Chalmers model "U" and "M"
>>> good old work horses Also Cletrac crawlers,, Minneapolis Moline .And even a
>>> Ferrari mini artic. plus loads of others . How I wish I had kept them all
>>> !! I would have been a millionaire
>>> I will tell my friend   to offer £100
>>> Richard
>>> --
>>>
>>> On Sunday, December 20, 2020 at 3:20:48 PM UTC timjz...@gmail.com wrote:
>>>
>>>> Any LOM is a good LOM. it's like restoration of an old OLIVER tractor.
>>>> It's all worth it in the end. Keep the heritage alive even it's only for
>>>> parts
>>>> --
>>>>
>>>> On Sun, Dec 20, 2020, 9:05 AM 'Curt George' via Legacy Ornamental Mills
>>>>  wrote:
>>>>
>>>>> Are you sure that lead screw is ruined?
>>>>>
>>>>> If its in as bad shape as you state. offer a few bucks for it. Out
>>>>> side the leadscrew and gears the hole machine only has $30.00 worth of
>>>>> scrap metal in it. If you can get it, a little TLC (Tender Loving Care.) I
>>>>> know you can get it working again.
>>>>> I wish you luck on this one.  In the worst case... if you pick it up.
>>>>> there are some parts in the machine that others (or your self) who could
>>>>> use with your Legacy.
>>>>>
>>>>> Good luck.
>>>>> C.A.G.
>>>>> --
>>>>> On Sunday, December 20, 2020, 05:47:50 AM EST, Richard Ellis <
>>>>> rchrd@gmail.com> wrote:
>>>>>
>>>>> I have a good friend who wants a REVO  I know where there is one, in
>>>>> an old barn, but in a very sad state. It is very rusty and has been for a
>>>>> long while. It has a rotary table laying on the floor along with other 
>>>>> Revo
>>>>> stuff. It also has a plate holder on the front with a few cutters  in it
>>>>> They are also very very rusty. I don't think This sad Revo has  been used
>>>>> for about six or more years.
>>>>> *Now my question !!! What is a sensible offer* ,bearing in mind the
>>>>> leadscrew is ruined. And spares are not available here in the U,K, It will
>>>>> need  a lot of work to restore it to a good condition.
>>>>> Richard U.K.
>>>>>
>>>> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/0a822836-dd14-4ea7-bd18-b31b6f5a5203n%40googlegroups.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/0a822836-dd14-4ea7-bd18-b31b6f5a5203n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLG0wQ4-diszt30%3DK-sje05jno2Em2iASW51O0W6C0sOJQ%40mail.gmail.com.

Re: Barn find Revo

2020-12-22 Thread Richard Ellis

Hi Mac
Mine was an older model it was articulated , had a small hydraulic ram to 
make it pivot in the middle. As far as I can remember a strange gear set up.
Richard

On Monday, December 21, 2020 at 7:00:38 PM UTC Va Oak wrote:

> Richard,
> Thanks.  I did that, and never could find one called "Artic".
> Saw a fair number of Ferrari "mini" tractors - but most seemed to be 
> somewhat "modern" - so figured they must be newer models - not one you were 
> referring to.
> Mac
> --
>
> -Original Message- 
> From: Richard Ellis 
> Sent: Dec 21, 2020 1:53 PM 
> To: Legacy Ornamental Mills 
> Subject: Re: Barn find Revo 
>
> Mac
> If you just type  Ferrari tractors in google search . It was only about 4 
> foot high. I used it to tow a small grass mower.
> Richard
> --
>
> On Monday, December 21, 2020 at 6:36:51 PM UTC Va Oak wrote:
>
>> Richard,
>> I can't find a "Ferrari mini artic" tractor on the internet.
>> Can you provide a link to pics or a site that shows one?
>> Sounds interesting.   Thanks.
>> Mac
>> --
>>
>> -Original Message- 
>> From: Richard Ellis 
>> Sent: Dec 21, 2020 3:47 AM 
>> To: Legacy Ornamental Mills 
>> Subject: Re: Barn find Revo 
>>
>> Thanks for the replies ,He wants a working Revo. And I don't want any 
>> parts. Tim talking tractors ,I have had Allis -Chalmers model "U" and "M" 
>> good old work horses Also Cletrac crawlers,, Minneapolis Moline .And even a 
>> Ferrari mini artic. plus loads of others . How I wish I had kept them all 
>> !! I would have been a millionaire
>> I will tell my friend   to offer £100
>> Richard
>> --
>>
>> On Sunday, December 20, 2020 at 3:20:48 PM UTC timjz...@gmail.com wrote:
>>
>>> Any LOM is a good LOM. it's like restoration of an old OLIVER tractor. 
>>> It's all worth it in the end. Keep the heritage alive even it's only for 
>>> parts
>>> --
>>>
>>> On Sun, Dec 20, 2020, 9:05 AM 'Curt George' via Legacy Ornamental Mills <
>>> legacy-orna...@googlegroups.com> wrote:
>>>
>>>> Are you sure that lead screw is ruined? 
>>>>
>>>> If its in as bad shape as you state. offer a few bucks for it. Out side 
>>>> the leadscrew and gears the hole machine only has $30.00 worth of scrap 
>>>> metal in it. If you can get it, a little TLC (Tender Loving Care.) I know 
>>>> you can get it working again.
>>>> I wish you luck on this one.  In the worst case... if you pick it up. 
>>>> there are some parts in the machine that others (or your self) who could 
>>>> use with your Legacy.
>>>>
>>>> Good luck.
>>>> C.A.G.
>>>> --
>>>> On Sunday, December 20, 2020, 05:47:50 AM EST, Richard Ellis <
>>>> rchrd@gmail.com> wrote: 
>>>>
>>>> I have a good friend who wants a REVO  I know where there is one, in an 
>>>> old barn, but in a very sad state. It is very rusty and has been for a 
>>>> long 
>>>> while. It has a rotary table laying on the floor along with other Revo 
>>>> stuff. It also has a plate holder on the front with a few cutters  in it 
>>>> They are also very very rusty. I don't think This sad Revo has  been used 
>>>> for about six or more years.
>>>> *Now my question !!! What is a sensible offer* ,bearing in mind the 
>>>> leadscrew is ruined. And spares are not available here in the U,K, It will 
>>>> need  a lot of work to restore it to a good condition.
>>>> Richard U.K.
>>>>
>>>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/0a822836-dd14-4ea7-bd18-b31b6f5a5203n%40googlegroups.com.

Re: Barn find Revo

2020-12-21 Thread Tim Ziegler

Oh my I should never have looked that up. Now I want one?  those are cool
Hmmm I have a birthday coming up
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Dec 21, 2020 at 12:53 PM Richard Ellis 
wrote:

> Mac
> If you just type  Ferrari tractors in google search . It was only about 4
> foot high. I used it to tow a small grass mower.
> Richard
>
> On Monday, December 21, 2020 at 6:36:51 PM UTC Va Oak wrote:
>
>> Richard,
>> I can't find a "Ferrari mini artic" tractor on the internet.
>> Can you provide a link to pics or a site that shows one?
>> Sounds interesting.   Thanks.
>> Mac
>> --
>>
>> -Original Message-
>> From: Richard Ellis
>> Sent: Dec 21, 2020 3:47 AM
>> To: Legacy Ornamental Mills
>> Subject: Re: Barn find Revo
>>
>> Thanks for the replies ,He wants a working Revo. And I don't want any
>> parts. Tim talking tractors ,I have had Allis -Chalmers model "U" and "M"
>> good old work horses Also Cletrac crawlers,, Minneapolis Moline .And even a
>> Ferrari mini artic. plus loads of others . How I wish I had kept them all
>> !! I would have been a millionaire
>> I will tell my friend   to offer £100
>> Richard
>> --
>>
>> On Sunday, December 20, 2020 at 3:20:48 PM UTC timjz...@gmail.com wrote:
>>
>>> Any LOM is a good LOM. it's like restoration of an old OLIVER tractor.
>>> It's all worth it in the end. Keep the heritage alive even it's only for
>>> parts
>>> --
>>>
>>> On Sun, Dec 20, 2020, 9:05 AM 'Curt George' via Legacy Ornamental Mills <
>>> legacy-orna...@googlegroups.com> wrote:
>>>
>>>> Are you sure that lead screw is ruined?
>>>>
>>>> If its in as bad shape as you state. offer a few bucks for it. Out side
>>>> the leadscrew and gears the hole machine only has $30.00 worth of scrap
>>>> metal in it. If you can get it, a little TLC (Tender Loving Care.) I know
>>>> you can get it working again.
>>>> I wish you luck on this one.  In the worst case... if you pick it up.
>>>> there are some parts in the machine that others (or your self) who could
>>>> use with your Legacy.
>>>>
>>>> Good luck.
>>>> C.A.G.
>>>> --
>>>> On Sunday, December 20, 2020, 05:47:50 AM EST, Richard Ellis <
>>>> rchrd@gmail.com> wrote:
>>>>
>>>> I have a good friend who wants a REVO  I know where there is one, in an
>>>> old barn, but in a very sad state. It is very rusty and has been for a long
>>>> while. It has a rotary table laying on the floor along with other Revo
>>>> stuff. It also has a plate holder on the front with a few cutters  in it
>>>> They are also very very rusty. I don't think This sad Revo has  been used
>>>> for about six or more years.
>>>> *Now my question !!! What is a sensible offer* ,bearing in mind the
>>>> leadscrew is ruined. And spares are not available here in the U,K, It will
>>>> need  a lot of work to restore it to a good condition.
>>>> Richard U.K.
>>>>
>>> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/cea1b73a-22b0-4d66-b60a-af8b59801e5bn%40googlegroups.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/cea1b73a-22b0-4d66-b60a-af8b59801e5bn%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGexrLDzkdbBqgvVxZ-%2Bq8jEzRH6qFYn8oX-MqJLc4JsQ%40mail.gmail.com.

Re: Barn find Revo

2020-12-21 Thread M.W.Foscue

Richard,Thanks.  I did that, and never could find one called "Artic".Saw a fair number of Ferrari "mini" tractors - but most seemed to be somewhat "modern" - so figured they must be newer models - not one you were referring to.Mac-Original Message-
From: Richard Ellis 
Sent: Dec 21, 2020 1:53 PM
To: Legacy Ornamental Mills 
Subject: Re: Barn find Revo

MacIf you just type  Ferrari tractors in google search . It was only about 4 foot high. I used it to tow a small grass mower.RichardOn Monday, December 21, 2020 at 6:36:51 PM UTC Va Oak wrote:Richard,I can't find a "Ferrari mini artic" tractor on the internet.Can you provide a link to pics or a site that shows one?Sounds interesting.   Thanks.Mac-Original Message-
From: Richard Ellis 
Sent: Dec 21, 2020 3:47 AM
To: Legacy Ornamental Mills 
Subject: Re: Barn find Revo

Thanks for the replies ,He wants a working Revo. And I don't want any parts. Tim talking tractors ,I have had Allis -Chalmers model "U" and "M" good old work horses Also Cletrac crawlers,, Minneapolis Moline .And even a Ferrari mini artic. plus loads of others . How I wish I had kept them all !! I would have been a millionaireI will tell my friend   to offer £100RichardOn Sunday, December 20, 2020 at 3:20:48 PM UTC timjz...@gmail.com wrote:Any LOM is a good LOM. it's like restoration of an old OLIVER tractor. It's all worth it in the end. Keep the heritage alive even it's only for partsOn Sun, Dec 20, 2020, 9:05 AM 'Curt George' via Legacy Ornamental Mills <legacy-orna...@googlegroups.com> wrote:
Are you sure that lead screw is ruined? If its in as bad shape as you state. offer a few bucks for it. Out side the leadscrew and gears the hole machine only has $30.00 worth of scrap metal in it. If you can get it, a little TLC (Tender Loving Care.) I know you can get it working again.I wish you luck on this one.  In the worst case... if you pick it up. there are some parts in the machine that others (or your self) who could use with your Legacy.Good luck.C.A.G.

On Sunday, December 20, 2020, 05:47:50 AM EST, Richard Ellis <rchrd@gmail.com> wrote:

I have a good friend who wants a REVO  I know where there is one, in an old barn, but in a very sad state. It is very rusty and has been for a long while. It has a rotary table laying on the floor along with other Revo stuff. It also has a plate holder on the front with a few cutters  in it They are also very very rusty. I don't think This sad Revo has  been used for about six or more years.Now my question !!! What is a sensible offer ,bearing in mind the leadscrew is ruined. And spares are not available here in the U,K, It will need  a lot of work to restore it to a good condition.Richard U.K.

-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1514776225.4200.1608577236838%40wamui-gaston.atl.sa.earthlink.net.

Re: Barn find Revo

2020-12-21 Thread Richard Ellis

Mac
If you just type  Ferrari tractors in google search . It was only about 4 
foot high. I used it to tow a small grass mower.
Richard

On Monday, December 21, 2020 at 6:36:51 PM UTC Va Oak wrote:

> Richard,
> I can't find a "Ferrari mini artic" tractor on the internet.
> Can you provide a link to pics or a site that shows one?
> Sounds interesting.   Thanks.
> Mac
> --
>
> -Original Message- 
> From: Richard Ellis 
> Sent: Dec 21, 2020 3:47 AM 
> To: Legacy Ornamental Mills 
> Subject: Re: Barn find Revo 
>
> Thanks for the replies ,He wants a working Revo. And I don't want any 
> parts. Tim talking tractors ,I have had Allis -Chalmers model "U" and "M" 
> good old work horses Also Cletrac crawlers,, Minneapolis Moline .And even a 
> Ferrari mini artic. plus loads of others . How I wish I had kept them all 
> !! I would have been a millionaire
> I will tell my friend   to offer £100
> Richard
> --
>
> On Sunday, December 20, 2020 at 3:20:48 PM UTC timjz...@gmail.com wrote:
>
>> Any LOM is a good LOM. it's like restoration of an old OLIVER tractor. 
>> It's all worth it in the end. Keep the heritage alive even it's only for 
>> parts
>> --
>>
>> On Sun, Dec 20, 2020, 9:05 AM 'Curt George' via Legacy Ornamental Mills <
>> legacy-orna...@googlegroups.com> wrote:
>>
>>> Are you sure that lead screw is ruined? 
>>>
>>> If its in as bad shape as you state. offer a few bucks for it. Out side 
>>> the leadscrew and gears the hole machine only has $30.00 worth of scrap 
>>> metal in it. If you can get it, a little TLC (Tender Loving Care.) I know 
>>> you can get it working again.
>>> I wish you luck on this one.  In the worst case... if you pick it up. 
>>> there are some parts in the machine that others (or your self) who could 
>>> use with your Legacy.
>>>
>>> Good luck.
>>> C.A.G.
>>> --
>>> On Sunday, December 20, 2020, 05:47:50 AM EST, Richard Ellis <
>>> rchrd@gmail.com> wrote: 
>>>
>>> I have a good friend who wants a REVO  I know where there is one, in an 
>>> old barn, but in a very sad state. It is very rusty and has been for a long 
>>> while. It has a rotary table laying on the floor along with other Revo 
>>> stuff. It also has a plate holder on the front with a few cutters  in it 
>>> They are also very very rusty. I don't think This sad Revo has  been used 
>>> for about six or more years.
>>> *Now my question !!! What is a sensible offer* ,bearing in mind the 
>>> leadscrew is ruined. And spares are not available here in the U,K, It will 
>>> need  a lot of work to restore it to a good condition.
>>> Richard U.K.
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/cea1b73a-22b0-4d66-b60a-af8b59801e5bn%40googlegroups.com.

Re: Barn find Revo

2020-12-21 Thread M.W.Foscue

Richard,I can't find a "Ferrari mini artic" tractor on the internet.Can you provide a link to pics or a site that shows one?Sounds interesting.   Thanks.Mac-Original Message-
From: Richard Ellis 
Sent: Dec 21, 2020 3:47 AM
To: Legacy Ornamental Mills 
Subject: Re: Barn find Revo

Thanks for the replies ,He wants a working Revo. And I don't want any parts. Tim talking tractors ,I have had Allis -Chalmers model "U" and "M" good old work horses Also Cletrac crawlers,, Minneapolis Moline .And even a Ferrari mini artic. plus loads of others . How I wish I had kept them all !! I would have been a millionaireI will tell my friend   to offer £100RichardOn Sunday, December 20, 2020 at 3:20:48 PM UTC timjz...@gmail.com wrote:Any LOM is a good LOM. it's like restoration of an old OLIVER tractor. It's all worth it in the end. Keep the heritage alive even it's only for partsOn Sun, Dec 20, 2020, 9:05 AM 'Curt George' via Legacy Ornamental Mills <legacy-orna...@googlegroups.com> wrote:
Are you sure that lead screw is ruined? If its in as bad shape as you state. offer a few bucks for it. Out side the leadscrew and gears the hole machine only has $30.00 worth of scrap metal in it. If you can get it, a little TLC (Tender Loving Care.) I know you can get it working again.I wish you luck on this one.  In the worst case... if you pick it up. there are some parts in the machine that others (or your self) who could use with your Legacy.Good luck.C.A.G.

On Sunday, December 20, 2020, 05:47:50 AM EST, Richard Ellis <rchrd@gmail.com> wrote:

I have a good friend who wants a REVO  I know where there is one, in an old barn, but in a very sad state. It is very rusty and has been for a long while. It has a rotary table laying on the floor along with other Revo stuff. It also has a plate holder on the front with a few cutters  in it They are also very very rusty. I don't think This sad Revo has  been used for about six or more years.Now my question !!! What is a sensible offer ,bearing in mind the leadscrew is ruined. And spares are not available here in the U,K, It will need  a lot of work to restore it to a good condition.Richard U.K.

-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/373442182.3890.1608575809645%40wamui-gaston.atl.sa.earthlink.net.

Re: Barn find Revo

2020-12-21 Thread Tim Ziegler

Great to hear other's share the same interests lol. I want to find a
Cletrac real bad.
We currently have 5 tractors and will sprinkle a bit in as this post moves
ahead ok.

sounds like fair price if I understood your lbs system.  What is that
equal too?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Dec 21, 2020 at 2:47 AM Richard Ellis 
wrote:

> Thanks for the replies ,He wants a working Revo. And I don't want any
> parts. Tim talking tractors ,I have had Allis -Chalmers model "U" and "M"
> good old work horses Also Cletrac crawlers,, Minneapolis Moline .And even a
> Ferrari mini artic. plus loads of others . How I wish I had kept them all
> !! I would have been a millionaire
> I will tell my friend   to offer £100
> Richard
>
>
>
> On Sunday, December 20, 2020 at 3:20:48 PM UTC timjz...@gmail.com wrote:
>
>> Any LOM is a good LOM. it's like restoration of an old OLIVER tractor.
>> It's all worth it in the end. Keep the heritage alive even it's only for
>> parts
>>
>>
>> On Sun, Dec 20, 2020, 9:05 AM 'Curt George' via Legacy Ornamental Mills <
>> legacy-orna...@googlegroups.com> wrote:
>>
>>> Are you sure that lead screw is ruined?
>>>
>>> If its in as bad shape as you state. offer a few bucks for it. Out side
>>> the leadscrew and gears the hole machine only has $30.00 worth of scrap
>>> metal in it. If you can get it, a little TLC (Tender Loving Care.) I know
>>> you can get it working again.
>>> I wish you luck on this one.  In the worst case... if you pick it up.
>>> there are some parts in the machine that others (or your self) who could
>>> use with your Legacy.
>>>
>>> Good luck.
>>> C.A.G.
>>>
>>> On Sunday, December 20, 2020, 05:47:50 AM EST, Richard Ellis <
>>> rchrd@gmail.com> wrote:
>>>
>>>
>>> I have a good friend who wants a REVO  I know where there is one, in an
>>> old barn, but in a very sad state. It is very rusty and has been for a long
>>> while. It has a rotary table laying on the floor along with other Revo
>>> stuff. It also has a plate holder on the front with a few cutters  in it
>>> They are also very very rusty. I don't think This sad Revo has  been used
>>> for about six or more years.
>>> *Now my question !!! What is a sensible offer* ,bearing in mind the
>>> leadscrew is ruined. And spares are not available here in the U,K, It will
>>> need  a lot of work to restore it to a good condition.
>>> Richard U.K.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/887f739c-cb48-4ff8-9e55-67f81470f77an%40googlegroups.com
>>> 
>>> .
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental...@googlegroups.com.
>>>
>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1027502550.1769687.1608476726041%40mail.yahoo.com
>>> 
>>> .
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/4c29cb58-82dc-4a82-bdd2-3fa518a9473fn%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFe02FRkm0MBwrDKLncG9YLhiW32UO8Czr%2BF3huvOKpDQ%40mail.gmail.com.

Re: Barn find Revo

2020-12-21 Thread Richard Ellis

Thanks for the replies ,He wants a working Revo. And I don't want any 
parts. Tim talking tractors ,I have had Allis -Chalmers model "U" and "M" 
good old work horses Also Cletrac crawlers,, Minneapolis Moline .And even a 
Ferrari mini artic. plus loads of others . How I wish I had kept them all 
!! I would have been a millionaire
I will tell my friend   to offer £100
Richard



On Sunday, December 20, 2020 at 3:20:48 PM UTC timjz...@gmail.com wrote:

> Any LOM is a good LOM. it's like restoration of an old OLIVER tractor. 
> It's all worth it in the end. Keep the heritage alive even it's only for 
> parts
>
>
> On Sun, Dec 20, 2020, 9:05 AM 'Curt George' via Legacy Ornamental Mills <
> legacy-orna...@googlegroups.com> wrote:
>
>> Are you sure that lead screw is ruined? 
>>
>> If its in as bad shape as you state. offer a few bucks for it. Out side 
>> the leadscrew and gears the hole machine only has $30.00 worth of scrap 
>> metal in it. If you can get it, a little TLC (Tender Loving Care.) I know 
>> you can get it working again.
>> I wish you luck on this one.  In the worst case... if you pick it up. 
>> there are some parts in the machine that others (or your self) who could 
>> use with your Legacy.
>>
>> Good luck.
>> C.A.G.
>>
>> On Sunday, December 20, 2020, 05:47:50 AM EST, Richard Ellis <
>> rchrd@gmail.com> wrote: 
>>
>>
>> I have a good friend who wants a REVO  I know where there is one, in an 
>> old barn, but in a very sad state. It is very rusty and has been for a long 
>> while. It has a rotary table laying on the floor along with other Revo 
>> stuff. It also has a plate holder on the front with a few cutters  in it 
>> They are also very very rusty. I don't think This sad Revo has  been used 
>> for about six or more years.
>> *Now my question !!! What is a sensible offer* ,bearing in mind the 
>> leadscrew is ruined. And spares are not available here in the U,K, It will 
>> need  a lot of work to restore it to a good condition.
>> Richard U.K.
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/887f739c-cb48-4ff8-9e55-67f81470f77an%40googlegroups.com
>>  
>> 
>> .
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental...@googlegroups.com.
>>
> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1027502550.1769687.1608476726041%40mail.yahoo.com
>>  
>> 
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/4c29cb58-82dc-4a82-bdd2-3fa518a9473fn%40googlegroups.com.

Re: Barn find Revo

2020-12-20 Thread Tim Ziegler

Any LOM is a good LOM. it's like restoration of an old OLIVER tractor. It's
all worth it in the end. Keep the heritage alive even it's only for parts


On Sun, Dec 20, 2020, 9:05 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Are you sure that lead screw is ruined?
>
> If its in as bad shape as you state. offer a few bucks for it. Out side
> the leadscrew and gears the hole machine only has $30.00 worth of scrap
> metal in it. If you can get it, a little TLC (Tender Loving Care.) I know
> you can get it working again.
> I wish you luck on this one.  In the worst case... if you pick it up.
> there are some parts in the machine that others (or your self) who could
> use with your Legacy.
>
> Good luck.
> C.A.G.
>
> On Sunday, December 20, 2020, 05:47:50 AM EST, Richard Ellis <
> rchrd.ell...@gmail.com> wrote:
>
>
> I have a good friend who wants a REVO  I know where there is one, in an
> old barn, but in a very sad state. It is very rusty and has been for a long
> while. It has a rotary table laying on the floor along with other Revo
> stuff. It also has a plate holder on the front with a few cutters  in it
> They are also very very rusty. I don't think This sad Revo has  been used
> for about six or more years.
> *Now my question !!! What is a sensible offer* ,bearing in mind the
> leadscrew is ruined. And spares are not available here in the U,K, It will
> need  a lot of work to restore it to a good condition.
> Richard U.K.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/887f739c-cb48-4ff8-9e55-67f81470f77an%40googlegroups.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1027502550.1769687.1608476726041%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF%2B6XPE_VivuocOdo8sQb9YL9H6n77-ZNPWvDisWGeOVg%40mail.gmail.com.

Re: Barn find Revo

2020-12-20 Thread 'Curt George' via Legacy Ornamental Mills

Richard.take some pictures of this machine. When there is a will, There is
always a way...There may be a way to restore this machine? or to use it for
the base of a New idea. ;-) I've been playing around with the idea of adding
linear rails onto a REVO, If you use this idea, most of the bad parts could be
bypassed. What I'm saying is, Don't ever give up! Any Machine can ALWAYS be
re-worked.And a machine in bad shape is worth nothing to most people.
C.A.G.
On Sunday, December 20, 2020, 10:05:26 AM EST, Curt George
wrote:

Are you sure that lead screw is ruined?
If its in as bad shape as you state. offer a few bucks for it. Out side the
leadscrew and gears the hole machine only has $30.00 worth of scrap metal in
it. If you can get it, a little TLC (Tender Loving Care.) I know you can get it
working again.I wish you luck on this one. In the worst case... if you pick it
up. there are some parts in the machine that others (or your self) who could
use with your Legacy.
Good luck.C.A.G.
On Sunday, December 20, 2020, 05:47:50 AM EST, Richard Ellis
wrote:

I have a good friend who wants a REVO I know where there is one, in an old
barn, but in a very sad state. It is very rusty and has been for a long while.
It has a rotary table laying on the floor along with other Revo stuff. It also
has a plate holder on the front with a few cutters in it They are also very
very rusty. I don't think This sad Revo has been used for about six or more
years.Now my question !!! What is a sensible offer ,bearing in mind the
leadscrew is ruined. And spares are not available here in the U,K, It will need
a lot of work to restore it to a good condition.Richard U.K.

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/887f739c-cb48-4ff8-9e55-67f81470f77an%40googlegroups.com.

Re: Barn find Revo

2020-12-20 Thread 'Curt George' via Legacy Ornamental Mills

RE: Barn find Revo

2020-12-20 Thread bulkeley

With out seeing it and what gears are there I would offer £100 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Richard Ellis
Sent: Sunday, 20 December 2020 9:48 PM
To: Legacy Ornamental Mills 
Subject: Barn find Revo

 

I have a good friend who wants a REVO  I know where there is one, in an old 
barn, but in a very sad state. It is very rusty and has been for a long while. 
It has a rotary table laying on the floor along with other Revo stuff. It also 
has a plate holder on the front with a few cutters  in it They are also very 
very rusty. I don't think This sad Revo has  been used for about six or more 
years.

Now my question !!! What is a sensible offer ,bearing in mind the leadscrew is 
ruined. And spares are not available here in the U,K, It will need  a lot of 
work to restore it to a good condition.

Richard U.K.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/887f739c-cb48-4ff8-9e55-67f81470f77an%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/887f739c-cb48-4ff8-9e55-67f81470f77an%40googlegroups.com?utm_medium=email&utm_source=footer>
 .



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000b01d6d6e0%24d7140480%24853c0d80%24%40mmnet.com.au.

Barn find Revo

2020-12-20 Thread Richard Ellis

I have a good friend who wants a REVO  I know where there is one, in an old 
barn, but in a very sad state. It is very rusty and has been for a long 
while. It has a rotary table laying on the floor along with other Revo 
stuff. It also has a plate holder on the front with a few cutters  in it 
They are also very very rusty. I don't think This sad Revo has  been used 
for about six or more years.
*Now my question !!! What is a sensible offer* ,bearing in mind the 
leadscrew is ruined. And spares are not available here in the U,K, It will 
need  a lot of work to restore it to a good condition.
Richard U.K.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/887f739c-cb48-4ff8-9e55-67f81470f77an%40googlegroups.com.

Re: Barn find Revo

Re: Barn find Revo

Re: Barn find Revo

Re: Barn find Revo

Re: Barn find Revo

Re: Barn find Revo

Re: Barn find Revo

Re: Barn find Revo

Re: Barn find Revo

Re: Barn find Revo

Re: Barn find Revo

Re: Barn find Revo

Re: Barn find Revo

Re: Barn find Revo

Re: Barn find Revo

Re: Barn find Revo

Re: Barn find Revo

RE: Barn find Revo

Barn find Revo

19 matches

Site Navigation

Mail list logo

Footer information