RE: Just to confirm this will fit the Revo - thanks

[Ray]

Thanks – someone in the group emailed me a copy.

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Richard Ellis
Sent: Sunday, August 11, 2019 5:41 PM
To: Legacy Ornamental Mills 
Subject: Re: Just to confirm this will fit the Revo - thanks

 

Hi Ray

I have a manual and loads of other stuff . But no copier . But you are welcome 
to come over and study it,and  also have a look at my Revo .

I am a little puzzled though !! When I visited you, I saw the Revo in your barn 
,with a Triton router fixed to it. ( a bit rusty on the chuck and leadscrew and 
other places ) through lack of use,,  What exactly do you need to know to 
enable you to put it together.?? It did look together !!

One thing I wish to stress _I never lend my tools and that of 
course includes the manual, but you are quite welcome to peruse them 

Richard




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEGTW/ig6SI9Gh1RPxW%2BQlE8BAA%3D%3D%40sky.com.

Re: Just to confirm this will fit the Revo - thanks

[Richard Ellis]

Hi Ray
I have a manual and loads of other stuff . But no copier . But you are 
welcome to come over and study it,and  also have a look at my Revo .
I am a little puzzled though !! When I visited you, I saw the Revo in your 
barn ,with a Triton router fixed to it. ( a bit rusty on the chuck and 
leadscrew and other places ) through lack of use,,  What exactly do you 
need to know to enable you to put it together.?? It did look together !!
One thing I wish to stress _I never lend my tools and that of 
course includes the manual, but you are quite welcome to peruse them 
Richard

On Saturday, August 10, 2019 at 11:10:59 AM UTC+1, Brafield Bodger wrote:
>
> I only got a couple of DVDs and I have no idea where there are.
>
>  
>
> **groan**
>
>  
>
>  
>
> *From:* legacy-orna...@googlegroups.com  <
> legacy-orna...@googlegroups.com > *On Behalf Of *
> bulk...@mmnet.com.au 
> *Sent:* Friday, August 9, 2019 11:55 PM
> *To:* legacy-orna...@googlegroups.com 
> *Subject:* RE: Just to confirm this will fit the Revo - thanks
>
>  
>
> Ps if your revo is in pieces follow the manual putting it back together 
> remember the rails are not the same both sides even though the look it they 
> only go one way up or the saddle and cross slide wont slide smoothly
>
>  
>
> Bill
>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/b5df4e88-883c-44f0-9fee-16677d5fae98%40googlegroups.com.

RE: Just to confirm this will fit the Revo - thanks

[bulkeley]

Send me your email address and I will send you one if its ok with Tim K 
normally its his job but I’m not sure if he has access to his one where he is 
right now

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Ray
Sent: Saturday, 10 August 2019 8:09 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Just to confirm this will fit the Revo - thanks

 

There’s a manual?  I never got one.  Can anyone email me a scanned copy please?

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
bulke...@mmnet.com.au  
Sent: Friday, August 9, 2019 11:55 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: RE: Just to confirm this will fit the Revo - thanks

 

Ps if your revo is in pieces follow the manual putting it back together 
remember the rails are not the same both sides even though the look it they 
only go one way up or the saddle and cross slide wont slide smoothly

 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEDowVdXg0ExPuAT4JKe5oEoBAA%3D%3D%40sky.com
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d54f67%24f7aec6f0%24e70c54d0%24%40mmnet.com.au.

RE: Just to confirm this will fit the Revo - thanks

[Ray]

I only got a couple of DVDs and I have no idea where there are.

 

*groan*

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Friday, August 9, 2019 11:55 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Just to confirm this will fit the Revo - thanks

 

Ps if your revo is in pieces follow the manual putting it back together 
remember the rails are not the same both sides even though the look it they 
only go one way up or the saddle and cross slide wont slide smoothly

 

Bill

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEETJmfmRKDBKirsMUEkIgP0BAA%3D%3D%40sky.com.

RE: Just to confirm this will fit the Revo - thanks

[Ray]

There’s a manual?  I never got one.  Can anyone email me a scanned copy please?

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Friday, August 9, 2019 11:55 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Just to confirm this will fit the Revo - thanks

 

Ps if your revo is in pieces follow the manual putting it back together 
remember the rails are not the same both sides even though the look it they 
only go one way up or the saddle and cross slide wont slide smoothly

 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEDowVdXg0ExPuAT4JKe5oEoBAA%3D%3D%40sky.com.

RE: Just to confirm this will fit the Revo - thanks

[bulkeley]

Ps if your revo is in pieces follow the manual putting it back together 
remember the rails are not the same both sides even though the look it they 
only go one way up or the saddle and cross slide wont slide smoothly

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Saturday, 10 August 2019 8:30 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Just to confirm this will fit the Revo - thanks

 

That’s great please post pictures of your revo when she’s up and running be 
great to see it

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Ray
Sent: Saturday, 10 August 2019 6:07 AM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: RE: Just to confirm this will fit the Revo - thanks

 

Yup – have now ordered the insert thanks.

 

All I need now is for it to arrive and to put my REVO back together ☹

 

Ray

 

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
bulke...@mmnet.com.au  
Sent: Friday, August 9, 2019 6:39 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: RE: Just to confirm this will fit the Revo - thanks

 

I see now I understand as long as the insert thread is the same as your chuck 
you will end up with a chuck that fits your revo

 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEJHbCjaeVclJqh8waUKd4aoBAA%3D%3D%40sky.com
 

 .

 


 

 

Virus-free.  

 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d54f02%2404d58a50%240e809ef0%24%40mmnet.com.au
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001801d54f05%2486e67a60%2494b36f20%24%40mmnet.com.au.

RE: Just to confirm this will fit the Revo - thanks

[Ray]

Yup – have now ordered the insert thanks.

 

All I need now is for it to arrive and to put my REVO back together ☹

 

Ray

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Friday, August 9, 2019 6:39 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Just to confirm this will fit the Revo - thanks

 

I see now I understand as long as the insert thread is the same as your chuck 
you will end up with a chuck that fits your revo

 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEJHbCjaeVclJqh8waUKd4aoBAA%3D%3D%40sky.com.

RE: Just to confirm this will fit the Revo - thanks

[bulkeley]

I see now I understand as long as the insert thread is the same as your chuck 
you will end up with a chuck that fits your revo

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Ray
Sent: Saturday, 10 August 2019 1:35 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Just to confirm this will fit the Revo - thanks

 

Havent yet got the insert.

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
bulke...@mmnet.com.au  
Sent: Friday, August 9, 2019 12:18 AM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: RE: Just to confirm this will fit the Revo - thanks

 

I don’t get it? If you have the chuck and insert and you have your revo just go 
and slip it on the headstock spindle and see if it fits what am I missing 

 

Bill

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEDRl6CqcS09NmlAJthES3l4BAA%3D%3D%40sky.com
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d54ed9%2467b320c0%2437196240%24%40mmnet.com.au.

RE: Just to confirm this will fit the Revo - thanks

[Ray]

Havent yet got the insert.

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Friday, August 9, 2019 12:18 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Just to confirm this will fit the Revo - thanks

 

I don’t get it? If you have the chuck and insert and you have your revo just go 
and slip it on the headstock spindle and see if it fits what am I missing 

 

Bill

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEDRl6CqcS09NmlAJthES3l4BAA%3D%3D%40sky.com.

RE: Just to confirm this will fit the Revo - thanks

[bulkeley]

You are totally right Richard that’s why all questions on this group will be 
answered if possible no matter how simple they are or how often asked sharing 
knowledge is what we’re all about.

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Richard Ellis
Sent: Friday, 9 August 2019 5:01 PM
To: Legacy Ornamental Mills 
Subject: Re: Just to confirm this will fit the Revo - thanks

 

Tim

I think you are right  and of course Bill certainly is . But the question that 
Ray has asked may help someone somewhere ,, some time !!

Richard

On Friday, August 9, 2019 at 7:37:25 AM UTC+1, Tim wrote:

Just wanted to say, welcome to the group and feel free to ask any question to 
keep the  LOM information flowing

Tim

On Aug 8, 2019, at 2:21 PM, Brafield Bodger  > 
wrote:

I have a supernova with just that insert fitted :)

 

 Thanks for your help.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/71e5cc4f-2514-456a-955e-98d6b6c4de8b%40googlegroups.com
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d54e9e%24dd710ab0%2498532010%24%40mmnet.com.au.

Re: Just to confirm this will fit the Revo - thanks

[Richard Ellis]

Tim
I think you are right  and of course Bill certainly is . But the question 
that Ray has asked may help someone somewhere ,, some time !!
Richard

On Friday, August 9, 2019 at 7:37:25 AM UTC+1, Tim wrote:
>
> Just wanted to say, welcome to the group and feel free to ask any question 
> to keep the  LOM information flowing
>
> Tim
> On Aug 8, 2019, at 2:21 PM, Brafield Bodger > 
> wrote:
>>
>> I have a supernova with just that insert fitted :)
>>>
>>
>>  Thanks for your help.
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/71e5cc4f-2514-456a-955e-98d6b6c4de8b%40googlegroups.com.

Re: Just to confirm this will fit the Revo - thanks

[Tim Krause]

Just wanted to say, welcome to the group and feel free to ask any question to 
keep the  LOM information flowing

Tim

On Aug 8, 2019, 2:21 PM, at 2:21 PM, Brafield Bodger  wrote:
>
>>
>> I have a supernova with just that insert fitted :)
>>
>
> Thanks for your help.
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/44f2add4-7cc5-4af3-8529-8b77e6eb2540%40googlegroups.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/749ad95e-e010-4548-8b9e-e3556f0b1748%40comcast.net.

RE: Just to confirm this will fit the Revo - thanks

[bulkeley]

I don’t get it? If you have the chuck and insert and you have your revo just go 
and slip it on the headstock spindle and see if it fits what am I missing 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Brafield Bodger
Sent: Friday, 9 August 2019 7:21 AM
To: Legacy Ornamental Mills 
Subject: Re: Just to confirm this will fit the Revo - thanks

 

I have a supernova with just that insert fitted :)

 

 Thanks for your help.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/44f2add4-7cc5-4af3-8529-8b77e6eb2540%40googlegroups.com
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d54e3f%2495f894a0%24c1e9bde0%24%40mmnet.com.au.

Re: Just to confirm this will fit the Revo - thanks

[Brafield Bodger]

>
> I have a supernova with just that insert fitted :)
>

 Thanks for your help.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/44f2add4-7cc5-4af3-8529-8b77e6eb2540%40googlegroups.com.

RE: Just to confirm this will fit the Revo - thanks

[Tim Krause]

Well that's good!  I'm in sunny Spokane, Wa right now so swinging by home ain't 
an option!

On Aug 7, 2019, 9:29 PM, at 9:29 PM, MWF  wrote:
>Tim,
>
>You found your mind - it was not lost.  All 3 of the output shafts on
>the Shopsmith Headstock are 5/8" diameter.
>
>So any lathe accessory that says it is an adapter for, or "fits"
>Shipsmith, will have to have a 5/8" diameter bore.
>
>You can sleep well - knowing that you have your mind well in hand.
>
>Mac
>_
>_
>
>
>-Original Message- 
>From: Tim Krause 
>Sent: Aug 7, 2019 11:18 PM 
>To: Legacy Ornamental Mills 
>Subject: RE: Just to confirm this will fit the Revo - thanks 
>
>Um, I might be losing my mind, but shopsmith is a 5/8" bore, either my
>mind is of, the ad is wrong or shopsmith has a new size.  See... 
>
>https://www.pennstateind.com/store/L5818.html
>
>Tim 
>
>PS. I'm a long ways away from mine to measures.
>
>On Aug 7, 2019, at 1:30 PM, bulke...@mmnet.com.au wrote:
>
>Yes I believe it will provided the thread fits your chuck or you will
>need a chuck with a ¾ dia X 16 TPI thread
>
> 
>
>Bill
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
> On Behalf Of Brafield Bodger
>Sent: Thursday, 8 August 2019 1:43 AM
>To: Legacy Ornamental Mills 
>Subject: Just to confirm this will fit the Revo - thanks
>
> 
>
>https://www.ebay.co.uk/itm/NEW-LATHE-CHUCK-ADAPTER-3-4-X-16-TPI-MADE-IN-USA-FOR-THE-SHOPSMITH-MARK-V/273131056739?hash=item3f97e12e63:g:M~QAAOSwEjFXdFPy
>
> 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/607b445b-d7f9-4769-9a19-b8973c0028da%40googlegroups.com.
>
>
> Virus-free. www.avast.com 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/98225972-5836-485c-b3bd-cee1119650df%40comcast.net.
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/1948005117.17870.1565238562476%40wamui-berry.atl.sa.earthlink.net.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1bb6993d-145b-4628-a8bb-2cf7cb40caea%40comcast.net.

RE: Just to confirm this will fit the Revo - thanks

[MWF]

Tim,You found your mind - it was not lost.  All 3 of the output shafts on the Shopsmith Headstock are 5/8" diameter.So any lathe accessory that says it is an adapter for, or "fits" Shipsmith, will have to have a 5/8" diameter bore.You can sleep well - knowing that you have your mind well in hand.Mac-Original Message-
From: Tim Krause 
Sent: Aug 7, 2019 11:18 PM
To: Legacy Ornamental Mills 
Subject: RE: Just to confirm this will fit the Revo - thanks

Um, I might be losing my mind, but shopsmith is a 5/8" bore, either my mind is of, the ad is wrong or shopsmith has a new size.  See... 
 https://www.pennstateind.com/store/L5818.html
Tim 
PS. I'm a long ways away from mine to measures.
On Aug 7, 2019, at 1:30 PM, bulke...@mmnet.com.au wrote:
Yes I believe it will provided the thread fits your chuck or you will need a chuck with a ¾ dia X 16 TPI thread Bill From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Brafield BodgerSent: Thursday, 8 August 2019 1:43 AMTo: Legacy Ornamental Mills Subject: Just to confirm this will fit the Revo - thanks https://www.ebay.co.uk/itm/NEW-LATHE-CHUCK-ADAPTER-3-4-X-16-TPI-MADE-IN-USA-FOR-THE-SHOPSMITH-MARK-V/273131056739?hash=item3f97e12e63:g:M~QAAOSwEjFXdFPy -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/607b445b-d7f9-4769-9a19-b8973c0028da%40googlegroups.com.

 

  Virus-free. www.avast.com
  
 
 




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/98225972-5836-485c-b3bd-cee1119650df%40comcast.net.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1948005117.17870.1565238562476%40wamui-berry.atl.sa.earthlink.net.

RE: Just to confirm this will fit the Revo - thanks

[Tim Krause]

Um, I might be losing my mind, but shopsmith is a 5/8" bore, either my mind is 
of, the ad is wrong or shopsmith has a new size.  See... 

https://www.pennstateind.com/store/L5818.html

Tim 

PS. I'm a long ways away from mine to measures.

On Aug 7, 2019, 1:30 PM, at 1:30 PM, bulke...@mmnet.com.au wrote:
>Yes I believe it will provided the thread fits your chuck or you will
>need a chuck with a ¾ dia X 16 TPI thread
>
> 
>
>Bill
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
> On Behalf Of Brafield Bodger
>Sent: Thursday, 8 August 2019 1:43 AM
>To: Legacy Ornamental Mills 
>Subject: Just to confirm this will fit the Revo - thanks
>
> 
>
>https://www.ebay.co.uk/itm/NEW-LATHE-CHUCK-ADAPTER-3-4-X-16-TPI-MADE-IN-USA-FOR-THE-SHOPSMITH-MARK-V/273131056739?hash=item3f97e12e63:g:M~QAAOSwEjFXdFPy
>
> 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
> .
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/607b445b-d7f9-4769-9a19-b8973c0028da%40googlegroups.com
>
>.
>
>
>
>---
>This email has been checked for viruses by Avast antivirus software.
>https://www.avast.com/antivirus
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d54d5e%24f97ed0c0%24ec7c7240%24%40mmnet.com.au.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/98225972-5836-485c-b3bd-cee1119650df%40comcast.net.

RE: Just to confirm this will fit the Revo - thanks

[bulkeley]

Yes I believe it will provided the thread fits your chuck or you will need a 
chuck with a ¾ dia X 16 TPI thread

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Brafield Bodger
Sent: Thursday, 8 August 2019 1:43 AM
To: Legacy Ornamental Mills 
Subject: Just to confirm this will fit the Revo - thanks

 

https://www.ebay.co.uk/itm/NEW-LATHE-CHUCK-ADAPTER-3-4-X-16-TPI-MADE-IN-USA-FOR-THE-SHOPSMITH-MARK-V/273131056739?hash=item3f97e12e63:g:M~QAAOSwEjFXdFPy

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/607b445b-d7f9-4769-9a19-b8973c0028da%40googlegroups.com
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d54d5e%24f97ed0c0%24ec7c7240%24%40mmnet.com.au.

Just to confirm this will fit the Revo - thanks

[Brafield Bodger]

https://www.ebay.co.uk/itm/NEW-LATHE-CHUCK-ADAPTER-3-4-X-16-TPI-MADE-IN-USA-FOR-THE-SHOPSMITH-MARK-V/273131056739?hash=item3f97e12e63:g:M~QAAOSwEjFXdFPy

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/607b445b-d7f9-4769-9a19-b8973c0028da%40googlegroups.com.