subject:"Legacy Design Kit"

Otherwise  perfect Mac.

And yes we are getting  more snow again Tuesday-Wednesday

On Sun, Mar 19, 2023, 8:40 PM M.W.Foscue  wrote:

> #1: TK (Krause)
>
> #2: TZ (Ziegler)
>
> #3: TK2 (Knight)
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Mar 19, 2023 9:19 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
> yup or through a middle initial in there, have to do something simple lol.
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> On Sun, Mar 19, 2023 at 8:10 PM M.W.Foscue  wrote:
>
>> Ok "Tims" -
>>
>> We need to get ya'll's "names" (what we are going to refer to you as)
>> worked out sooner than later.
>>
>> We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z).
>>
>> Now that we have another Tim K (Knight) - we will depend upon ya'll to
>> work out what Tim Knight
>>
>> will be referred to as. (Tim K2?)
>>
>> Mac
>> --
>> --
>>
>> -Original Message-
>> From: 
>> Sent: Mar 19, 2023 8:06 PM
>> To: 
>> Subject: Re: Legacy Design Kit
>>
>>
>> Tim Z thanks for the welcome actually my name is also Tim Knight my wife
>> and I share the google account we do a lot of crafts together so we use the
>> same accounts to communicate with other so we don’t over look each other’s
>> orders when they come up. But I’m the only one that uses the Legacy 1200.
>> The account is under her name but I don’t mine if you call me out as Kelly
>> because I have seen a few Tim’s around on here. Just like my work we have 3
>> Tim’s there also better known as Tim 1, Tim 2 and Tim 3, I’m know as Tim 1
>> since I’ve been there the longest.
>>
>> On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler 
>> wrote:
>>
>>> Hey Kelly welcome and thanks for stepping up to the plate to help those
>>> out.
>>>
>>> Kind Regards,
>>>
>>> Timothy J. Ziegler
>>> Ziegler WoodWork & Specialty
>>> 14171 160th Ave.
>>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail&source=g>
>>> Foreston MN 56330
>>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail&source=g>
>>>
>>> 320-294-5798 shop
>>> 320-630-2243 cell
>>>
>>>
>>> On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:
>>>
>>>
>>>> If someone has DWG or DXF files I can convert them into just about any
>>>> format that is needed. I use AutoCAD just about every day. If anyone wants
>>>> to send me the file to convert, be glad to help.
>>>>
>>>> On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
>>>> wrote:
>>>>
>>>>> i will make copies at work , dont have a scanner at home , be glad to
>>>>> mail it to you.
>>>>>
>>>>> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
>>>>> wrote:
>>>>> >
>>>>> > Cole,
>>>>> >
>>>>> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
>>>>> identification of the bits"?
>>>>> >
>>>>> > If so, are they something that can be emailed or snail-mailed?  If
>>>>> they are, I'd like to work something out with you to get a copy.
>>>>> >
>>>>> > Thanks.
>>>>> >
>>>>> > Mac
>>>>> >
>>>>> > 
>>>>> >
>>>>> > -Original Message-
>>>>> > From: 
>>>>> > Sent: Mar 14, 2023 7:34 PM
>>>>> > To: 
>>>>> > Subject: Re: Legacy Design Kit
>>>>> >
>>>>> >
>>>>> >
>>>>> > Nat can email me so I can get his address.. mine is
>>>>> coleandrew...@gmail.com
>>>>> >
>>>>> > Sent from my iPhone
>>>>> >
>>>>> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>>>>> >
>>>>> > Your right mac there isn’t anything about a piece of plexiglass I
>>>>> guess that’s why I don’t know anything about it lo

Re: Legacy Design Kit

Except there's at least  1-2 more Tim's  on the forum.  Lol

On Sun, Mar 19, 2023, 8:40 PM M.W.Foscue  wrote:

> #1: TK (Krause)
>
> #2: TZ (Ziegler)
>
> #3: TK2 (Knight)
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Mar 19, 2023 9:19 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
> yup or through a middle initial in there, have to do something simple lol.
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> On Sun, Mar 19, 2023 at 8:10 PM M.W.Foscue  wrote:
>
>> Ok "Tims" -
>>
>> We need to get ya'll's "names" (what we are going to refer to you as)
>> worked out sooner than later.
>>
>> We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z).
>>
>> Now that we have another Tim K (Knight) - we will depend upon ya'll to
>> work out what Tim Knight
>>
>> will be referred to as. (Tim K2?)
>>
>> Mac
>> --
>> --
>>
>> -Original Message-
>> From: 
>> Sent: Mar 19, 2023 8:06 PM
>> To: 
>> Subject: Re: Legacy Design Kit
>>
>>
>> Tim Z thanks for the welcome actually my name is also Tim Knight my wife
>> and I share the google account we do a lot of crafts together so we use the
>> same accounts to communicate with other so we don’t over look each other’s
>> orders when they come up. But I’m the only one that uses the Legacy 1200.
>> The account is under her name but I don’t mine if you call me out as Kelly
>> because I have seen a few Tim’s around on here. Just like my work we have 3
>> Tim’s there also better known as Tim 1, Tim 2 and Tim 3, I’m know as Tim 1
>> since I’ve been there the longest.
>>
>> On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler 
>> wrote:
>>
>>> Hey Kelly welcome and thanks for stepping up to the plate to help those
>>> out.
>>>
>>> Kind Regards,
>>>
>>> Timothy J. Ziegler
>>> Ziegler WoodWork & Specialty
>>> 14171 160th Ave.
>>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail&source=g>
>>> Foreston MN 56330
>>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail&source=g>
>>>
>>> 320-294-5798 shop
>>> 320-630-2243 cell
>>>
>>>
>>> On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:
>>>
>>>
>>>> If someone has DWG or DXF files I can convert them into just about any
>>>> format that is needed. I use AutoCAD just about every day. If anyone wants
>>>> to send me the file to convert, be glad to help.
>>>>
>>>> On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
>>>> wrote:
>>>>
>>>>> i will make copies at work , dont have a scanner at home , be glad to
>>>>> mail it to you.
>>>>>
>>>>> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
>>>>> wrote:
>>>>> >
>>>>> > Cole,
>>>>> >
>>>>> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
>>>>> identification of the bits"?
>>>>> >
>>>>> > If so, are they something that can be emailed or snail-mailed?  If
>>>>> they are, I'd like to work something out with you to get a copy.
>>>>> >
>>>>> > Thanks.
>>>>> >
>>>>> > Mac
>>>>> >
>>>>> > 
>>>>> >
>>>>> > -Original Message-----
>>>>> > From: 
>>>>> > Sent: Mar 14, 2023 7:34 PM
>>>>> > To: 
>>>>> > Subject: Re: Legacy Design Kit
>>>>> >
>>>>> >
>>>>> >
>>>>> > Nat can email me so I can get his address.. mine is
>>>>> coleandrew...@gmail.com
>>>>> >
>>>>> > Sent from my iPhone
>>>>> >
>>>>> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>>>>> >
>>>>> > Your right mac there isn’t anything about a piece of plexiglass I
>>>>> guess that’s why I don’t know anything about it

Re: Legacy Design Kit

2023-03-19 Thread M.W.Foscue

#1: TK (Krause)
#2: TZ (Ziegler)
#3: TK2 (Knight)
Mac
-Original Message-
From: 
Sent: Mar 19, 2023 9:19 PM
To: 
Subject: Re: Legacy Design Kit

yup or through a middle initial in there, have to do something simple lol. Kind 
Regards, 
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell

On Sun, Mar 19, 2023 at 8:10 PM M.W.Foscue mailto:mwfos...@earthlink.net)> wrote:
Ok "Tims" -
We need to get ya'll's "names" (what we are going to refer to you as) worked 
out sooner than later.
We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z). 
Now that we have another Tim K (Knight) - we will depend upon ya'll to work out 
what Tim Knight
will be referred to as. (Tim K2?)
Mac

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com)>
Sent: Mar 19, 2023 8:06 PM
To: mailto:legacy-ornamental-mills@googlegroups.com)>
Subject: Re: Legacy Design Kit

Tim Z thanks for the welcome actually my name is also Tim Knight my wife and I 
share the google account we do a lot of crafts together so we use the same 
accounts to communicate with other so we don’t over look each 
other’s orders when they come up. But I’m the only one that uses 
the Legacy 1200. The account is under her name but I don’t mine if you 
call me out as Kelly because I have seen a few Tim’s around on here. Just 
like my work we have 3 Tim’s there also better known as Tim 1, Tim 2 and 
Tim 3, I’m know as Tim 1 since I’ve been there the longest.

On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler mailto:timjzieg...@gmail.com)> wrote:
Hey Kelly welcome and thanks for stepping up to the plate to help those out. 
Kind Regards, 
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave. 
(https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail&source=g)
Foreston MN 56330 
(https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail&source=g)

320-294-5798 shop
320-630-2243 cell

On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight mailto:tkms...@gmail.com)> wrote:

If someone has DWG or DXF files I can convert them into just about any format 
that is needed. I use AutoCAD just about every day. If anyone wants to send me 
the file to convert, be glad to help.

On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews mailto:coleandrew...@gmail.com)> wrote:
i will make copies at work , dont have a scanner at home , be glad to
mail it to you.

On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue mailto:mwfos...@earthlink.net)> wrote:
>
> Cole,
>
> Do you happen to have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
>
> If so, are they something that can be emailed or snail-mailed?  If they are, 
> I'd like to work something out with you to get a copy.
>
> Thanks.
>
> Mac
>
> 
>
> -Original Message-
> From:  (mailto:legacy-ornamental-mills@googlegroups.com)>
> Sent: Mar 14, 2023 7:34 PM
> To:  (mailto:legacy-ornamental-mills@googlegroups.com)>
> Subject: Re: Legacy Design Kit
>
>
>
> Nat can email me so I can get his address.. mine is
> coleandrew...@gmail.com (mailto:coleandrew...@gmail.com)
>
> Sent from my iPhone
>
> On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au 
> (mailto:bulke...@mmnet.com.au) wrote:
>
> Your right mac there isn’t anything about a piece of plexiglass I guess 
> that’s why I don’t know anything about it lol
>
>
>
> The other thing that the design kit doesn’t have which need making is 
> templates for all the combination bits
>
> 
>
>
>
> 
>
>
>
> Bill
>
>
>
>
>
> From: legacy-ornamental-mills@googlegroups.com 
> (mailto:legacy-ornamental-mills@googlegroups.com) 
>  (mailto:legacy-ornamental-mills@googlegroups.com)> On Behalf Of M.W.Foscue
> Sent: Tuesday, 14 March 2023 11:59 AM
> To: legacy-ornamental-mills@googlegroups.com 
> (mailto:legacy-ornamental-mills@googlegroups.com)
> Subject: RE: Legacy Design Kit
>
>
>
> According to the below images of the Design Kit - it states "The Legacy 
> Design Kit consists of:
>
> and it lists the components.  Nowhere in that list is any mention of a "blank 
> sheet of plexiglas".
>
> I suspect it was something the earlier owner added/used(?) - but was not a 
> component of the kit when purchased new.
>
>
>
> Does anyone have a copy of the "3 - Router Bit Keys for easy identification 
> of the bits"?
>
> A bought my Design Kit from someone in our Group - and it did not have them.
>
> I'd sure like to get a copy - if possible.
>
>
>
> The other question I have:
>
> Has anyone ever taken a Design Kit sheet (round, l

Re: Legacy Design Kit

yup or through a middle initial in there, have to do something simple lol.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Mar 19, 2023 at 8:10 PM M.W.Foscue  wrote:

> Ok "Tims" -
>
> We need to get ya'll's "names" (what we are going to refer to you as)
> worked out sooner than later.
>
> We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z).
>
> Now that we have another Tim K (Knight) - we will depend upon ya'll to
> work out what Tim Knight
>
> will be referred to as. (Tim K2?)
>
> Mac
> --
> --
>
> -----Original Message-
> From: 
> Sent: Mar 19, 2023 8:06 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
> Tim Z thanks for the welcome actually my name is also Tim Knight my wife
> and I share the google account we do a lot of crafts together so we use the
> same accounts to communicate with other so we don’t over look each other’s
> orders when they come up. But I’m the only one that uses the Legacy 1200.
> The account is under her name but I don’t mine if you call me out as Kelly
> because I have seen a few Tim’s around on here. Just like my work we have 3
> Tim’s there also better known as Tim 1, Tim 2 and Tim 3, I’m know as Tim 1
> since I’ve been there the longest.
>
> On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler  wrote:
>
>> Hey Kelly welcome and thanks for stepping up to the plate to help those
>> out.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail&source=g>
>> Foreston MN 56330
>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail&source=g>
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:
>>
>>
>>> If someone has DWG or DXF files I can convert them into just about any
>>> format that is needed. I use AutoCAD just about every day. If anyone wants
>>> to send me the file to convert, be glad to help.
>>>
>>> On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
>>> wrote:
>>>
>>>> i will make copies at work , dont have a scanner at home , be glad to
>>>> mail it to you.
>>>>
>>>> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
>>>> wrote:
>>>> >
>>>> > Cole,
>>>> >
>>>> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
>>>> identification of the bits"?
>>>> >
>>>> > If so, are they something that can be emailed or snail-mailed?  If
>>>> they are, I'd like to work something out with you to get a copy.
>>>> >
>>>> > Thanks.
>>>> >
>>>> > Mac
>>>> >
>>>> > 
>>>> >
>>>> > -Original Message-
>>>> > From: 
>>>> > Sent: Mar 14, 2023 7:34 PM
>>>> > To: 
>>>> > Subject: Re: Legacy Design Kit
>>>> >
>>>> >
>>>> >
>>>> > Nat can email me so I can get his address.. mine is
>>>> coleandrew...@gmail.com
>>>> >
>>>> > Sent from my iPhone
>>>> >
>>>> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>>>> >
>>>> > Your right mac there isn’t anything about a piece of plexiglass I
>>>> guess that’s why I don’t know anything about it lol
>>>> >
>>>> >
>>>> >
>>>> > The other thing that the design kit doesn’t have which need making is
>>>> templates for all the combination bits
>>>> >
>>>> > 
>>>> >
>>>> >
>>>> >
>>>> > 
>>>> >
>>>> >
>>>> >
>>>> > Bill
>>>> >
>>>> >
>>>> >
>>>> >
>>>> >
>>>> > From: legacy-ornamental-mills@googlegroups.com <
>>>> legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.Foscue
>>>> > Sent: Tuesday, 14 March 2023 11:59 AM
>>>> > To: legacy-ornamental-mills@googlegroups.com
>>>> > Subject: RE: Legacy Design

Re: Legacy Design Kit

2023-03-19 Thread M.W.Foscue

Ok "Tims" - 
We need to get ya'll's "names" (what we are going to refer to you as) worked 
out sooner than later.
We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z). 
Now that we have another Tim K (Knight) - we will depend upon ya'll to work out 
what Tim Knight
will be referred to as. (Tim K2?)
Mac
-Original Message-
From: 
Sent: Mar 19, 2023 8:06 PM
To: 
Subject: Re: Legacy Design Kit

Tim Z thanks for the welcome actually my name is also Tim Knight my wife and I 
share the google account we do a lot of crafts together so we use the same 
accounts to communicate with other so we don’t over look each 
other’s orders when they come up. But I’m the only one that uses 
the Legacy 1200. The account is under her name but I don’t mine if you 
call me out as Kelly because I have seen a few Tim’s around on here. Just 
like my work we have 3 Tim’s there also better known as Tim 1, Tim 2 and 
Tim 3, I’m know as Tim 1 since I’ve been there the longest.

On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler mailto:timjzieg...@gmail.com)> wrote:
Hey Kelly welcome and thanks for stepping up to the plate to help those out. 
Kind Regards, 
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave. 
(https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail&source=g)
Foreston MN 56330 
(https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail&source=g)

320-294-5798 shop
320-630-2243 cell

On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight mailto:tkms...@gmail.com)> wrote:

If someone has DWG or DXF files I can convert them into just about any format 
that is needed. I use AutoCAD just about every day. If anyone wants to send me 
the file to convert, be glad to help.

On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews mailto:coleandrew...@gmail.com)> wrote:
i will make copies at work , dont have a scanner at home , be glad to
mail it to you.

On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue mailto:mwfos...@earthlink.net)> wrote:
>
> Cole,
>
> Do you happen to have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
>
> If so, are they something that can be emailed or snail-mailed?  If they are, 
> I'd like to work something out with you to get a copy.
>
> Thanks.
>
> Mac
>
> 
>
> -Original Message-
> From:  (mailto:legacy-ornamental-mills@googlegroups.com)>
> Sent: Mar 14, 2023 7:34 PM
> To:  (mailto:legacy-ornamental-mills@googlegroups.com)>
> Subject: Re: Legacy Design Kit
>
>
>
> Nat can email me so I can get his address.. mine is
> coleandrew...@gmail.com (mailto:coleandrew...@gmail.com)
>
> Sent from my iPhone
>
> On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au 
> (mailto:bulke...@mmnet.com.au) wrote:
>
> Your right mac there isn’t anything about a piece of plexiglass I guess 
> that’s why I don’t know anything about it lol
>
>
>
> The other thing that the design kit doesn’t have which need making is 
> templates for all the combination bits
>
> 
>
>
>
> 
>
>
>
> Bill
>
>
>
>
>
> From: legacy-ornamental-mills@googlegroups.com 
> (mailto:legacy-ornamental-mills@googlegroups.com) 
>  (mailto:legacy-ornamental-mills@googlegroups.com)> On Behalf Of M.W.Foscue
> Sent: Tuesday, 14 March 2023 11:59 AM
> To: legacy-ornamental-mills@googlegroups.com 
> (mailto:legacy-ornamental-mills@googlegroups.com)
> Subject: RE: Legacy Design Kit
>
>
>
> According to the below images of the Design Kit - it states "The Legacy 
> Design Kit consists of:
>
> and it lists the components.  Nowhere in that list is any mention of a "blank 
> sheet of plexiglas".
>
> I suspect it was something the earlier owner added/used(?) - but was not a 
> component of the kit when purchased new.
>
>
>
> Does anyone have a copy of the "3 - Router Bit Keys for easy identification 
> of the bits"?
>
> A bought my Design Kit from someone in our Group - and it did not have them.
>
> I'd sure like to get a copy - if possible.
>
>
>
> The other question I have:
>
> Has anyone ever taken a Design Kit sheet (round, long rectangle, or both) to 
> a copy shop, like Staples, FedEx, etc. and had copies made?  If so, how'd 
> they turn out and what was the cost?
>
>
>
> Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
>
> Mac
>
> 
> 
>
> -Original Message-
> From:  (mailto:legacy-ornamental-mills@googlegroups.com)>
> Sent: Mar 13, 2023 5:27 PM
> To:  (mailto:legacy-ornamental-mills@googlegroups.com)>
&g

Re: Legacy Design Kit

Hey Tim,

Yeah and we have some trouble with so many Tims.
Where I use to work we had about 4 of them too. I was TZ, then we had TS,
TH and I can't remember the other guys nick name.
1,2,3,4 would have been easier.
I have asked the Forum guys to at least use our last initial for that very
reason. lol
Well anyway welcome and hope to see some of your posts.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Mar 19, 2023 at 7:06 PM Kelly Knight  wrote:

> Tim Z thanks for the welcome actually my name is also Tim Knight my wife
> and I share the google account we do a lot of crafts together so we use the
> same accounts to communicate with other so we don’t over look each other’s
> orders when they come up. But I’m the only one that uses the Legacy 1200.
> The account is under her name but I don’t mine if you call me out as Kelly
> because I have seen a few Tim’s around on here. Just like my work we have 3
> Tim’s there also better known as Tim 1, Tim 2 and Tim 3, I’m know as Tim 1
> since I’ve been there the longest.
>
> On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler  wrote:
>
>> Hey Kelly welcome and thanks for stepping up to the plate to help those
>> out.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail&source=g>
>> Foreston MN 56330
>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail&source=g>
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:
>>
>>> If someone has DWG or DXF files I can convert them into just about any
>>> format that is needed. I use AutoCAD just about every day. If anyone wants
>>> to send me the file to convert, be glad to help.
>>>
>>> On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
>>> wrote:
>>>
>>>> i will make copies at work , dont have a scanner at home , be glad to
>>>> mail it to you.
>>>>
>>>> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
>>>> wrote:
>>>> >
>>>> > Cole,
>>>> >
>>>> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
>>>> identification of the bits"?
>>>> >
>>>> > If so, are they something that can be emailed or snail-mailed?  If
>>>> they are, I'd like to work something out with you to get a copy.
>>>> >
>>>> > Thanks.
>>>> >
>>>> > Mac
>>>> >
>>>> > 
>>>> >
>>>> > -Original Message-
>>>> > From: 
>>>> > Sent: Mar 14, 2023 7:34 PM
>>>> > To: 
>>>> > Subject: Re: Legacy Design Kit
>>>> >
>>>> >
>>>> >
>>>> > Nat can email me so I can get his address.. mine is
>>>> coleandrew...@gmail.com
>>>> >
>>>> > Sent from my iPhone
>>>> >
>>>> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>>>> >
>>>> > Your right mac there isn’t anything about a piece of plexiglass I
>>>> guess that’s why I don’t know anything about it lol
>>>> >
>>>> >
>>>> >
>>>> > The other thing that the design kit doesn’t have which need making is
>>>> templates for all the combination bits
>>>> >
>>>> > 
>>>> >
>>>> >
>>>> >
>>>> > 
>>>> >
>>>> >
>>>> >
>>>> > Bill
>>>> >
>>>> >
>>>> >
>>>> >
>>>> >
>>>> > From: legacy-ornamental-mills@googlegroups.com <
>>>> legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.Foscue
>>>> > Sent: Tuesday, 14 March 2023 11:59 AM
>>>> > To: legacy-ornamental-mills@googlegroups.com
>>>> > Subject: RE: Legacy Design Kit
>>>> >
>>>> >
>>>> >
>>>> > According to the below images of the Design Kit - it states "The
>>>> Legacy Design Kit consists of:
>>>> >
>>>> > and it lists the components.  Nowhere in that list is any mention of
>>>>

Re: Legacy Design Kit

2023-03-19 Thread Kelly Knight

Tim Z thanks for the welcome actually my name is also Tim Knight my wife
and I share the google account we do a lot of crafts together so we use the
same accounts to communicate with other so we don’t over look each other’s
orders when they come up. But I’m the only one that uses the Legacy 1200.
The account is under her name but I don’t mine if you call me out as Kelly
because I have seen a few Tim’s around on here. Just like my work we have 3
Tim’s there also better known as Tim 1, Tim 2 and Tim 3, I’m know as Tim 1
since I’ve been there the longest.

On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler  wrote:

> Hey Kelly welcome and thanks for stepping up to the plate to help those
> out.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail&source=g>
> Foreston MN 56330
> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail&source=g>
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:
>
>> If someone has DWG or DXF files I can convert them into just about any
>> format that is needed. I use AutoCAD just about every day. If anyone wants
>> to send me the file to convert, be glad to help.
>>
>> On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
>> wrote:
>>
>>> i will make copies at work , dont have a scanner at home , be glad to
>>> mail it to you.
>>>
>>> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
>>> wrote:
>>> >
>>> > Cole,
>>> >
>>> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
>>> identification of the bits"?
>>> >
>>> > If so, are they something that can be emailed or snail-mailed?  If
>>> they are, I'd like to work something out with you to get a copy.
>>> >
>>> > Thanks.
>>> >
>>> > Mac
>>> >
>>> > 
>>> >
>>> > -Original Message-
>>> > From: 
>>> > Sent: Mar 14, 2023 7:34 PM
>>> > To: 
>>> > Subject: Re: Legacy Design Kit
>>> >
>>> >
>>> >
>>> > Nat can email me so I can get his address.. mine is
>>> coleandrew...@gmail.com
>>> >
>>> > Sent from my iPhone
>>> >
>>> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>>> >
>>> > Your right mac there isn’t anything about a piece of plexiglass I
>>> guess that’s why I don’t know anything about it lol
>>> >
>>> >
>>> >
>>> > The other thing that the design kit doesn’t have which need making is
>>> templates for all the combination bits
>>> >
>>> > 
>>> >
>>> >
>>> >
>>> > 
>>> >
>>> >
>>> >
>>> > Bill
>>> >
>>> >
>>> >
>>> >
>>> >
>>> > From: legacy-ornamental-mills@googlegroups.com <
>>> legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.Foscue
>>> > Sent: Tuesday, 14 March 2023 11:59 AM
>>> > To: legacy-ornamental-mills@googlegroups.com
>>> > Subject: RE: Legacy Design Kit
>>> >
>>> >
>>> >
>>> > According to the below images of the Design Kit - it states "The
>>> Legacy Design Kit consists of:
>>> >
>>> > and it lists the components.  Nowhere in that list is any mention of a
>>> "blank sheet of plexiglas".
>>> >
>>> > I suspect it was something the earlier owner added/used(?) - but was
>>> not a component of the kit when purchased new.
>>> >
>>> >
>>> >
>>> > Does anyone have a copy of the "3 - Router Bit Keys for easy
>>> identification of the bits"?
>>> >
>>> > A bought my Design Kit from someone in our Group - and it did not have
>>> them.
>>> >
>>> > I'd sure like to get a copy - if possible.
>>> >
>>> >
>>> >
>>> > The other question I have:
>>> >
>>> > Has anyone ever taken a Design Kit sheet (round, long rectangle, or
>>> both) to a copy shop, like Staples, FedEx, etc. and had copies made?  If
>>> so, how'd they turn out and what was the cost?
>>> >
>>> >
>

Re: Legacy Design Kit

2023-03-18 Thread Tim Ziegler

Very Good Jim, hats off to you for getting those made your self.
I appreciate your knowledge and motivation.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Mar 18, 2023 at 6:53 PM jrig...@gmail.com 
wrote:

> To All,
>
> Attached are some templates of the bits commonly used with the LOM.  I
> made them to fit on a 11"x8.5" piece of paper.  They are in PDF format with
> a ruler imbedded to validate the print size. When you print them be sure
> the 'scaling' in Adobe Reader is set to 'none'.
>
> We have a library in town that has a Laser engraver that is available to
> the public. I acquired some thin flexible plastic and took my drawings with
> the plastic and cut the templates.  We also have a plastics store in town
> and I got the plastic from their 'scrap' bin so the total cost was about
> $10.
>
> Enjoy,
>
> Jim
>
> On Sunday, March 12, 2023 at 12:06:01 AM UTC-6 Nathaniel Bacon wrote:
>
>> To all "Google Legacy Group" members:
>>
>> Included in a recent purchase was a box labeled "Design Kit".  The kit
>> only contained:
>> One large blank sheet of plexiglass
>> Three 50-page pads of 11" x 39" spindle layout graph paper
>> Two -- square pads of 13" round layout paper
>>
>> Missing were:
>> The three clear acrylic templates
>> The 12 sample designs
>> The "How-to-do" VHS Tape
>>
>> Question:
>> If I provide the large paper, would one of the members be willing to copy
>> the clear acrylic templates onto the paper?   From there I would make the
>> templates.
>>
>> Also, if I provide the large paper, would one of the members be willing
>> to copy the "sample Designs" onto the paper?  From there I would make the
>> templates.
>>
>> Lastly, would one of the members be willing to send me their VHS tape to
>> copy and return their VHS [image: Legacy Cover Page.png][image: Legacy
>> Design Kit - 1.png][image: Legacy Design Kit - 2.png]tape?
>>
>> A word Doc showing the Legacy "Design Kit" information in the Legacy
>> instruction manual is attached.
>>
>> Nat
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/7100e217-50a3-4ce4-b48f-25c90ad28552n%40googlegroups.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/7100e217-50a3-4ce4-b48f-25c90ad28552n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHnXh_SEHqA%2BG1WiTDhZr1Dn1x2A2w-b1uzYXuBgOKBLw%40mail.gmail.com.

Re: Legacy Design Kit

2023-03-18 Thread jrig...@gmail.com

To All,

Attached are some templates of the bits commonly used with the LOM.  I made 
them to fit on a 11"x8.5" piece of paper.  They are in PDF format with a 
ruler imbedded to validate the print size. When you print them be sure the 
'scaling' in Adobe Reader is set to 'none'.

We have a library in town that has a Laser engraver that is available to 
the public. I acquired some thin flexible plastic and took my drawings with 
the plastic and cut the templates.  We also have a plastics store in town 
and I got the plastic from their 'scrap' bin so the total cost was about 
$10.

Enjoy,

Jim

On Sunday, March 12, 2023 at 12:06:01 AM UTC-6 Nathaniel Bacon wrote:

> To all "Google Legacy Group" members:
>
> Included in a recent purchase was a box labeled "Design Kit".  The kit 
> only contained:
> One large blank sheet of plexiglass
> Three 50-page pads of 11" x 39" spindle layout graph paper
> Two -- square pads of 13" round layout paper
>
> Missing were:
> The three clear acrylic templates
> The 12 sample designs
> The "How-to-do" VHS Tape
>
> Question:
> If I provide the large paper, would one of the members be willing to copy 
> the clear acrylic templates onto the paper?   From there I would make the 
> templates.
>
> Also, if I provide the large paper, would one of the members be willing to 
> copy the "sample Designs" onto the paper?  From there I would make the 
> templates.
>
> Lastly, would one of the members be willing to send me their VHS tape to 
> copy and return their VHS [image: Legacy Cover Page.png][image: Legacy 
> Design Kit - 1.png][image: Legacy Design Kit - 2.png]tape?
>
> A word Doc showing the Legacy "Design Kit" information in the Legacy 
> instruction manual is attached.
>
> Nat
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/7100e217-50a3-4ce4-b48f-25c90ad28552n%40googlegroups.com.


Router Bit Profiles for Templates 5.pdf
Description: Adobe PDF document


Router Bit Profiles for Templates 4.pdf
Description: Adobe PDF document


Router Bit Profiles for Templates 1.pdf
Description: Adobe PDF document


Router Bit Profiles for Templates 2.pdf
Description: Adobe PDF document


Router Bit Profiles for Templates 3.pdf
Description: Adobe PDF document

Re: Legacy Design Kit

2023-03-16 Thread Tim Ziegler

Hey Kelly welcome and thanks for stepping up to the plate to help those
out.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:

> If someone has DWG or DXF files I can convert them into just about any
> format that is needed. I use AutoCAD just about every day. If anyone wants
> to send me the file to convert, be glad to help.
>
> On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
> wrote:
>
>> i will make copies at work , dont have a scanner at home , be glad to
>> mail it to you.
>>
>> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
>> wrote:
>> >
>> > Cole,
>> >
>> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
>> identification of the bits"?
>> >
>> > If so, are they something that can be emailed or snail-mailed?  If they
>> are, I'd like to work something out with you to get a copy.
>> >
>> > Thanks.
>> >
>> > Mac
>> >
>> > 
>> >
>> > -Original Message-
>> > From: 
>> > Sent: Mar 14, 2023 7:34 PM
>> > To: 
>> > Subject: Re: Legacy Design Kit
>> >
>> >
>> >
>> > Nat can email me so I can get his address.. mine is
>> coleandrew...@gmail.com
>> >
>> > Sent from my iPhone
>> >
>> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>> >
>> > Your right mac there isn’t anything about a piece of plexiglass I guess
>> that’s why I don’t know anything about it lol
>> >
>> >
>> >
>> > The other thing that the design kit doesn’t have which need making is
>> templates for all the combination bits
>> >
>> > 
>> >
>> >
>> >
>> > 
>> >
>> >
>> >
>> > Bill
>> >
>> >
>> >
>> >
>> >
>> > From: legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.Foscue
>> > Sent: Tuesday, 14 March 2023 11:59 AM
>> > To: legacy-ornamental-mills@googlegroups.com
>> > Subject: RE: Legacy Design Kit
>> >
>> >
>> >
>> > According to the below images of the Design Kit - it states "The Legacy
>> Design Kit consists of:
>> >
>> > and it lists the components.  Nowhere in that list is any mention of a
>> "blank sheet of plexiglas".
>> >
>> > I suspect it was something the earlier owner added/used(?) - but was
>> not a component of the kit when purchased new.
>> >
>> >
>> >
>> > Does anyone have a copy of the "3 - Router Bit Keys for easy
>> identification of the bits"?
>> >
>> > A bought my Design Kit from someone in our Group - and it did not have
>> them.
>> >
>> > I'd sure like to get a copy - if possible.
>> >
>> >
>> >
>> > The other question I have:
>> >
>> > Has anyone ever taken a Design Kit sheet (round, long rectangle, or
>> both) to a copy shop, like Staples, FedEx, etc. and had copies made?  If
>> so, how'd they turn out and what was the cost?
>> >
>> >
>> >
>> > Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
>> >
>> > Mac
>> >
>> > 
>> > 
>> >
>> > -Original Message-
>> > From: 
>> > Sent: Mar 13, 2023 5:27 PM
>> > To: 
>> > Subject: RE: Legacy Design Kit
>> >
>> >
>> >
>> > That’s great Cole I’m sure Nat will be contacting you soon ,you know I
>> still don’t know what the large blank sheet of plexiglass
>> >
>> > Is for, maybe its just to keep the paper from getting creases in it ???
>> >
>> >
>> >
>> > Bill
>> >
>> >
>> >
>> > From: legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> On Behalf Of Cole Andrews
>> > Sent: Tuesday, 14 March 2023 3:25 AM
>> > To: legacy-ornamental-mills@googlegroups.com
>> > Subject: Re: Legacy Design Kit
>> >
>> >
>> >
>> > I might have some extra templates , when I bought mine they sent extra
>> of some and none of the others ,

Re: Legacy Design Kit

2023-03-15 Thread Kelly Knight

If someone has DWG or DXF files I can convert them into just about any
format that is needed. I use AutoCAD just about every day. If anyone wants
to send me the file to convert, be glad to help.

On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
wrote:

> i will make copies at work , dont have a scanner at home , be glad to
> mail it to you.
>
> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
> wrote:
> >
> > Cole,
> >
> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
> >
> > If so, are they something that can be emailed or snail-mailed?  If they
> are, I'd like to work something out with you to get a copy.
> >
> > Thanks.
> >
> > Mac
> >
> > 
> >
> > -Original Message-
> > From: 
> > Sent: Mar 14, 2023 7:34 PM
> > To: 
> > Subject: Re: Legacy Design Kit
> >
> >
> >
> > Nat can email me so I can get his address.. mine is
> coleandrew...@gmail.com
> >
> > Sent from my iPhone
> >
> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
> >
> > Your right mac there isn’t anything about a piece of plexiglass I guess
> that’s why I don’t know anything about it lol
> >
> >
> >
> > The other thing that the design kit doesn’t have which need making is
> templates for all the combination bits
> >
> > 
> >
> >
> >
> > 
> >
> >
> >
> > Bill
> >
> >
> >
> >
> >
> > From: legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.Foscue
> > Sent: Tuesday, 14 March 2023 11:59 AM
> > To: legacy-ornamental-mills@googlegroups.com
> > Subject: RE: Legacy Design Kit
> >
> >
> >
> > According to the below images of the Design Kit - it states "The Legacy
> Design Kit consists of:
> >
> > and it lists the components.  Nowhere in that list is any mention of a
> "blank sheet of plexiglas".
> >
> > I suspect it was something the earlier owner added/used(?) - but was not
> a component of the kit when purchased new.
> >
> >
> >
> > Does anyone have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
> >
> > A bought my Design Kit from someone in our Group - and it did not have
> them.
> >
> > I'd sure like to get a copy - if possible.
> >
> >
> >
> > The other question I have:
> >
> > Has anyone ever taken a Design Kit sheet (round, long rectangle, or
> both) to a copy shop, like Staples, FedEx, etc. and had copies made?  If
> so, how'd they turn out and what was the cost?
> >
> >
> >
> > Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
> >
> > Mac
> >
> > 
> > ________
> >
> > -Original Message-
> > From: 
> > Sent: Mar 13, 2023 5:27 PM
> > To: 
> > Subject: RE: Legacy Design Kit
> >
> >
> >
> > That’s great Cole I’m sure Nat will be contacting you soon ,you know I
> still don’t know what the large blank sheet of plexiglass
> >
> > Is for, maybe its just to keep the paper from getting creases in it ???
> >
> >
> >
> > Bill
> >
> >
> >
> > From: legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> On Behalf Of Cole Andrews
> > Sent: Tuesday, 14 March 2023 3:25 AM
> > To: legacy-ornamental-mills@googlegroups.com
> > Subject: Re: Legacy Design Kit
> >
> >
> >
> > I might have some extra templates , when I bought mine they sent extra
> of some and none of the others , took awhile to get straight.
> >
> >
> >
> > On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon 
> wrote:
> >
> > To all "Google Legacy Group" members:
> >
> >
> >
> > Included in a recent purchase was a box labeled "Design Kit".  The kit
> only contained:
> >
> > One large blank sheet of plexiglass
> >
> > Three 50-page pads of 11" x 39" spindle layout graph paper
> >
> > Two -- square pads of 13" round layout paper
> >
> >
> >
> > Missing were:
> >
> > The three clear acrylic templates
> >
> > The 12 sample designs
> >
> > The "How-to-do" VHS Tape
> >
> >
> >
> > Question:
> >
&

Re: Legacy Design Kit

2023-03-15 Thread jrig...@gmail.com

Cole,
Would you email me a copy also?

Thank you,
Jim Riggen
jrigge...@gmail.com




On Wednesday, March 15, 2023 at 6:54:09 AM UTC-5 Cole Andrews wrote:

> i will make copies at work , dont have a scanner at home , be glad to
> mail it to you.
>
> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue  wrote:
> >
> > Cole,
> >
> > Do you happen to have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
> >
> > If so, are they something that can be emailed or snail-mailed? If they 
> are, I'd like to work something out with you to get a copy.
> >
> > Thanks.
> >
> > Mac
> >
> > ____
> >
> > -Original Message-
> > From: 
> > Sent: Mar 14, 2023 7:34 PM
> > To: 
> > Subject: Re: Legacy Design Kit
> >
> >
> >
> > Nat can email me so I can get his address.. mine is colean...@gmail.com
> >
> > Sent from my iPhone
> >
> > On Mar 13, 2023, at 9:45 PM, bulk...@mmnet.com.au wrote:
> >
> > Your right mac there isn’t anything about a piece of plexiglass I guess 
> that’s why I don’t know anything about it lol
> >
> >
> >
> > The other thing that the design kit doesn’t have which need making is 
> templates for all the combination bits
> >
> > 
> >
> >
> >
> > 
> >
> >
> >
> > Bill
> >
> >
> >
> >
> >
> > From: legacy-orna...@googlegroups.com  
> On Behalf Of M.W.Foscue
> > Sent: Tuesday, 14 March 2023 11:59 AM
> > To: legacy-orna...@googlegroups.com
> > Subject: RE: Legacy Design Kit
> >
> >
> >
> > According to the below images of the Design Kit - it states "The Legacy 
> Design Kit consists of:
> >
> > and it lists the components. Nowhere in that list is any mention of a 
> "blank sheet of plexiglas".
> >
> > I suspect it was something the earlier owner added/used(?) - but was not 
> a component of the kit when purchased new.
> >
> >
> >
> > Does anyone have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
> >
> > A bought my Design Kit from someone in our Group - and it did not have 
> them.
> >
> > I'd sure like to get a copy - if possible.
> >
> >
> >
> > The other question I have:
> >
> > Has anyone ever taken a Design Kit sheet (round, long rectangle, or 
> both) to a copy shop, like Staples, FedEx, etc. and had copies made? If so, 
> how'd they turn out and what was the cost?
> >
> >
> >
> > Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
> >
> > Mac
> >
> > ____________
> > 
> >
> > -Original Message-
> > From: 
> > Sent: Mar 13, 2023 5:27 PM
> > To: 
> > Subject: RE: Legacy Design Kit
> >
> >
> >
> > That’s great Cole I’m sure Nat will be contacting you soon ,you know I 
> still don’t know what the large blank sheet of plexiglass
> >
> > Is for, maybe its just to keep the paper from getting creases in it ???
> >
> >
> >
> > Bill
> >
> >
> >
> > From: legacy-orna...@googlegroups.com  
> On Behalf Of Cole Andrews
> > Sent: Tuesday, 14 March 2023 3:25 AM
> > To: legacy-orna...@googlegroups.com
> > Subject: Re: Legacy Design Kit
> >
> >
> >
> > I might have some extra templates , when I bought mine they sent extra 
> of some and none of the others , took awhile to get straight.
> >
> >
> >
> > On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon  
> wrote:
> >
> > To all "Google Legacy Group" members:
> >
> >
> >
> > Included in a recent purchase was a box labeled "Design Kit". The kit 
> only contained:
> >
> > One large blank sheet of plexiglass
> >
> > Three 50-page pads of 11" x 39" spindle layout graph paper
> >
> > Two -- square pads of 13" round layout paper
> >
> >
> >
> > Missing were:
> >
> > The three clear acrylic templates
> >
> > The 12 sample designs
> >
> > The "How-to-do" VHS Tape
> >
> >
> >
> > Question:
> >
> > If I provide the large paper, would one of the members be willing to 
> copy the clear acrylic templates onto the paper? From there I would make 
> the templates.
> >
> >
> >
> > Also, if I provide t

Re: Legacy Design Kit

2023-03-15 Thread Cole Andrews

i will make copies at work , dont have a scanner at home , be glad to
mail it to you.

On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue  wrote:
>
> Cole,
>
> Do you happen to have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
>
> If so, are they something that can be emailed or snail-mailed?  If they are, 
> I'd like to work something out with you to get a copy.
>
> Thanks.
>
> Mac
>
> 
>
> -Original Message-----
> From: 
> Sent: Mar 14, 2023 7:34 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
>
> Nat can email me so I can get his address.. mine iscoleandrew...@gmail.com
>
> Sent from my iPhone
>
> On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>
> Your right mac there isn’t anything about a piece of plexiglass I guess 
> that’s why I don’t know anything about it lol
>
>
>
> The other thing that the design kit doesn’t have which need making is 
> templates for all the combination bits
>
> 
>
>
>
> 
>
>
>
> Bill
>
>
>
>
>
> From: legacy-ornamental-mills@googlegroups.com 
>  On Behalf Of M.W.Foscue
> Sent: Tuesday, 14 March 2023 11:59 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: Legacy Design Kit
>
>
>
> According to the below images of the Design Kit - it states "The Legacy 
> Design Kit consists of:
>
> and it lists the components.  Nowhere in that list is any mention of a "blank 
> sheet of plexiglas".
>
> I suspect it was something the earlier owner added/used(?) - but was not a 
> component of the kit when purchased new.
>
>
>
> Does anyone have a copy of the "3 - Router Bit Keys for easy identification 
> of the bits"?
>
> A bought my Design Kit from someone in our Group - and it did not have them.
>
> I'd sure like to get a copy - if possible.
>
>
>
> The other question I have:
>
> Has anyone ever taken a Design Kit sheet (round, long rectangle, or both) to 
> a copy shop, like Staples, FedEx, etc. and had copies made?  If so, how'd 
> they turn out and what was the cost?
>
>
>
> Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
>
> Mac
>
> 
> 
>
> -Original Message-
> From: 
> Sent: Mar 13, 2023 5:27 PM
> To: 
> Subject: RE: Legacy Design Kit
>
>
>
> That’s great Cole I’m sure Nat will be contacting you soon ,you know I still 
> don’t know what the large blank sheet of plexiglass
>
> Is for, maybe its just to keep the paper from getting creases in it ???
>
>
>
> Bill
>
>
>
> From: legacy-ornamental-mills@googlegroups.com 
>  On Behalf Of Cole Andrews
> Sent: Tuesday, 14 March 2023 3:25 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Legacy Design Kit
>
>
>
> I might have some extra templates , when I bought mine they sent extra of 
> some and none of the others , took awhile to get straight.
>
>
>
> On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon  wrote:
>
> To all "Google Legacy Group" members:
>
>
>
> Included in a recent purchase was a box labeled "Design Kit".  The kit only 
> contained:
>
> One large blank sheet of plexiglass
>
> Three 50-page pads of 11" x 39" spindle layout graph paper
>
> Two -- square pads of 13" round layout paper
>
>
>
> Missing were:
>
> The three clear acrylic templates
>
> The 12 sample designs
>
> The "How-to-do" VHS Tape
>
>
>
> Question:
>
> If I provide the large paper, would one of the members be willing to copy the 
> clear acrylic templates onto the paper?   From there I would make the 
> templates.
>
>
>
> Also, if I provide the large paper, would one of the members be willing to 
> copy the "sample Designs" onto the paper?  From there I would make the 
> templates.
>
>
>
> Lastly, would one of the members be willing to send me their VHS tape to copy 
> and return their VHS
>
> 
> 
> 
>
> tape?
>
>
>
> A word Doc showing the Legacy "Design Kit" information in the Legacy 
> instruction manual is attached.
>
>
>
> Nat
>
> --
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/

Re: Legacy Design Kit

I thought maybe the Archives ? no?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Mar 14, 2023 at 10:28 PM  wrote:

> Not sure I don’t have them on computer I will look in my design kit pack
> and see whats there
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Wednesday, 15 March 2023 2:15 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Legacy Design Kit
>
>
>
> Mac that might already be posted somewhere, Bill
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
> wrote:
>
> Cole,
>
> Do you happen to have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
>
> If so, are they something that can be emailed or snail-mailed?  If they
> are, I'd like to work something out with you to get a copy.
>
> Thanks.
>
> Mac
> --
>
> -Original Message-
> From: 
> Sent: Mar 14, 2023 7:34 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
>
> Nat can email me so I can get his address.. mine is
> coleandrew...@gmail.com
>
> Sent from my iPhone
>
>
>
> On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>
> Your right mac there isn’t anything about a piece of plexiglass I guess
> that’s why I don’t know anything about it lol
>
>
>
> The other thing that the design kit doesn’t have which need making is
> templates for all the combination bits
>
> 
>
>
>
> 
>
>
>
> Bill
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Tuesday, 14 March 2023 11:59 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Legacy Design Kit
>
>
>
> According to the below images of the Design Kit - it states "The Legacy
> Design Kit consists of:
>
> and it lists the components.  Nowhere in that list is any mention of a
> "blank sheet of plexiglas".
>
> I suspect it was something the earlier owner added/used(?) - but was not a
> component of the kit when purchased new.
>
>
>
> Does anyone have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
>
> A bought my Design Kit from someone in our Group - and it did not have
> them.
>
> I'd sure like to get a copy - if possible.
>
>
>
> The other question I have:
>
> Has anyone ever taken a Design Kit sheet (round, long rectangle, or both)
> to a copy shop, like Staples, FedEx, etc. and had copies made?  If so,
> how'd they turn out and what was the cost?
>
>
>
> Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Mar 13, 2023 5:27 PM
> To: 
> Subject: RE: Legacy Design Kit
>
>
>
> That’s great Cole I’m sure Nat will be contacting you soon ,you know I
> still don’t know what the large blank sheet of plexiglass
>
> Is for, maybe its just to keep the paper from getting creases in it ???
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Cole Andrews
> *Sent:* Tuesday, 14 March 2023 3:25 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Legacy Design Kit
>
>
>
> I might have some extra templates , when I bought mine they sent extra of
> some and none of the others , took awhile to get straight.
>
>
>
> On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon 
> wrote:
>
> To all "Google Legacy Group" members:
>
>
>
> Included in a recent purchase was a box labeled "Design Kit".  The kit
> only contained:
>
> One large blank sheet of plexiglass
>
> Three 50-page pads of 11" x 39" spindle layout graph paper
>
> Two -- square pads of 13" round layout paper
>
>
>
> Missing were:
>
> The three clear acrylic templates
>
> The 12 sample designs
>
> The "How-to-do" VHS Tape
>
>
>
> Question:
>
> If I provide the large paper, would one of the members be willing to copy

RE: Legacy Design Kit

2023-03-14 Thread bulkeley

Not sure I don’t have them on computer I will look in my design kit pack and 
see whats there

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Wednesday, 15 March 2023 2:15 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Legacy Design Kit

 

Mac that might already be posted somewhere, Bill


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:

Cole,

Do you happen to have a copy of the "3 - Router Bit Keys for easy 
identification of the bits"?

If so, are they something that can be emailed or snail-mailed?  If they are, 
I'd like to work something out with you to get a copy.

Thanks.

Mac


  _  


-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Mar 14, 2023 7:34 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: Legacy Design Kit

 

Nat can email me so I can get his address.. mine iscoleandrew...@gmail.com 
<mailto:coleandrew...@gmail.com> 

Sent from my iPhone

 

On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au 
<mailto:bulke...@mmnet.com.au>  wrote:

Your right mac there isn’t anything about a piece of plexiglass I guess that’s 
why I don’t know anything about it lol

 

The other thing that the design kit doesn’t have which need making is templates 
for all the combination bits 



 



 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Tuesday, 14 March 2023 11:59 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Legacy Design Kit

 

According to the below images of the Design Kit - it states "The Legacy Design 
Kit consists of:

and it lists the components.  Nowhere in that list is any mention of a "blank 
sheet of plexiglas".

I suspect it was something the earlier owner added/used(?) - but was not a 
component of the kit when purchased new.

 

Does anyone have a copy of the "3 - Router Bit Keys for easy identification of 
the bits"?

A bought my Design Kit from someone in our Group - and it did not have them.

I'd sure like to get a copy - if possible.

 

The other question I have: 

Has anyone ever taken a Design Kit sheet (round, long rectangle, or both) to a 
copy shop, like Staples, FedEx, etc. and had copies made?  If so, how'd they 
turn out and what was the cost?

 

Here's an early "Happy St Patrick's Day" wish to all of ya'll!!

Mac

  _  

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Mar 13, 2023 5:27 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: Legacy Design Kit

 

That’s great Cole I’m sure Nat will be contacting you soon ,you know I still 
don’t know what the large blank sheet of plexiglass

Is for, maybe its just to keep the paper from getting creases in it ???

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Cole Andrews
Sent: Tuesday, 14 March 2023 3:25 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Legacy Design Kit

 

I might have some extra templates , when I bought mine they sent extra of some 
and none of the others , took awhile to get straight.

 

On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon mailto:natbac...@gmail.com> > wrote:

To all "Google Legacy Group" members:

 

Included in a recent purchase was a box labeled "Design Kit".  The kit only 
contained:

One large blank sheet of plexiglass

Three 50-page pads of 11" x 39" spindle layout graph paper

Two -- square pads of 13" round layout paper

 

Missing were:

The three clear acrylic templates

The 12 sample designs

The "How-to-do" VHS Tape

 

Question:

If I provide the large paper, would one of the members be willing to copy the 
clear acrylic templates onto the paper?   From there I would make the templates.

 

Also, if I provide the large paper, would one of the members be willing to copy 
the "sample Designs" onto the paper?  From there I would make the templates.

 

Lastly, would one of the members be willing to send me their VHS tape to copy 
and return their VHS







tape?

 

A word Doc showing the Legacy "Design Kit" information in the Legacy 
instruction manual is attached.

 

Nat

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy O

Re: Legacy Design Kit

Mac that might already be posted somewhere, Bill
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue  wrote:

> Cole,
>
> Do you happen to have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
>
> If so, are they something that can be emailed or snail-mailed?  If they
> are, I'd like to work something out with you to get a copy.
>
> Thanks.
>
> Mac
> --
>
> -Original Message-
> From: 
> Sent: Mar 14, 2023 7:34 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
> Nat can email me so I can get his address.. mine is
> coleandrew...@gmail.com
>
> Sent from my iPhone
>
> On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>
> Your right mac there isn’t anything about a piece of plexiglass I guess
> that’s why I don’t know anything about it lol
>
>
>
> The other thing that the design kit doesn’t have which need making is
> templates for all the combination bits
> 
>
>
> 
>
>
>
> Bill
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Tuesday, 14 March 2023 11:59 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Legacy Design Kit
>
>
>
> According to the below images of the Design Kit - it states "The Legacy
> Design Kit consists of:
>
> and it lists the components.  Nowhere in that list is any mention of a
> "blank sheet of plexiglas".
>
> I suspect it was something the earlier owner added/used(?) - but was not a
> component of the kit when purchased new.
>
>
>
> Does anyone have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
>
> A bought my Design Kit from someone in our Group - and it did not have
> them.
>
> I'd sure like to get a copy - if possible.
>
>
>
> The other question I have:
>
> Has anyone ever taken a Design Kit sheet (round, long rectangle, or both)
> to a copy shop, like Staples, FedEx, etc. and had copies made?  If so,
> how'd they turn out and what was the cost?
>
>
>
> Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Mar 13, 2023 5:27 PM
> To: 
> Subject: RE: Legacy Design Kit
>
>
>
> That’s great Cole I’m sure Nat will be contacting you soon ,you know I
> still don’t know what the large blank sheet of plexiglass
>
> Is for, maybe its just to keep the paper from getting creases in it ???
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Cole Andrews
> *Sent:* Tuesday, 14 March 2023 3:25 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Legacy Design Kit
>
>
>
> I might have some extra templates , when I bought mine they sent extra of
> some and none of the others , took awhile to get straight.
>
>
>
> On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon 
> wrote:
>
> To all "Google Legacy Group" members:
>
>
>
> Included in a recent purchase was a box labeled "Design Kit".  The kit
> only contained:
>
> One large blank sheet of plexiglass
>
> Three 50-page pads of 11" x 39" spindle layout graph paper
>
> Two -- square pads of 13" round layout paper
>
>
>
> Missing were:
>
> The three clear acrylic templates
>
> The 12 sample designs
>
> The "How-to-do" VHS Tape
>
>
>
> Question:
>
> If I provide the large paper, would one of the members be willing to copy
> the clear acrylic templates onto the paper?   From there I would make the
> templates.
>
>
>
> Also, if I provide the large paper, would one of the members be willing to
> copy the "sample Designs" onto the paper?  From there I would make the
> templates.
>
>
>
> Lastly, would one of the members be willing to send me their VHS tape to
> copy and return their VHS
> 
> 
> 
>
> tape?
>
>
>
> A word Doc showing the Legacy "Design Kit" information in the Legacy
> instruction manual is attached.
>
>
>
> Nat
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop recei

Re: Legacy Design Kit

2023-03-14 Thread M.W.Foscue

Cole,
Do you happen to have a copy of the "3 - Router Bit Keys for easy 
identification of the bits"?
If so, are they something that can be emailed or snail-mailed?  If they are, 
I'd like to work something out with you to get a copy.
Thanks.
Mac
-Original Message-
From: 
Sent: Mar 14, 2023 7:34 PM
To: 
Subject: Re: Legacy Design Kit

Nat can email me so I can get his address.. mine iscoleandrew...@gmail.com

Sent from my iPhone

On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:


Your right mac there isn’t anything about a piece of plexiglass I guess 
that’s why I don’t know anything about it lol
 
The other thing that the design kit doesn’t have which need making is 
templates for all the combination bits 

 

 
Bill
 
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Tuesday, 14 March 2023 11:59 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Legacy Design Kit


According to the below images of the Design Kit - it states "The Legacy Design 
Kit consists of:
and it lists the components.  Nowhere in that list is any mention of a "blank 
sheet of plexiglas".
I suspect it was something the earlier owner added/used(?) - but was not a 
component of the kit when purchased new.
 
Does anyone have a copy of the "3 - Router Bit Keys for easy identification of 
the bits"?
A bought my Design Kit from someone in our Group - and it did not have them.
I'd sure like to get a copy - if possible.
 
The other question I have: 
Has anyone ever taken a Design Kit sheet (round, long rectangle, or both) to a 
copy shop, like Staples, FedEx, etc. and had copies made?  If so, how'd they 
turn out and what was the cost?
 
Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
Mac



-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com)>
Sent: Mar 13, 2023 5:27 PM
To: mailto:legacy-ornamental-mills@googlegroups.com)>
Subject: RE: Legacy Design Kit

That’s great Cole I’m sure Nat will be contacting you soon ,you 
know I still don’t know what the large blank sheet of plexiglass
Is for, maybe its just to keep the paper from getting creases in it ???
 
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
(mailto:legacy-ornamental-mills@googlegroups.com) 
mailto:legacy-ornamental-mills@googlegroups.com)> On Behalf Of Cole Andrews
Sent: Tuesday, 14 March 2023 3:25 AM
To: legacy-ornamental-mills@googlegroups.com 
(mailto:legacy-ornamental-mills@googlegroups.com)
Subject: Re: Legacy Design Kit


I might have some extra templates , when I bought mine they sent extra of some 
and none of the others , took awhile to get straight.


On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon mailto:natbac...@gmail.com)> wrote:

To all "Google Legacy Group" members:



Included in a recent purchase was a box labeled "Design Kit".  The kit only 
contained:
One large blank sheet of plexiglass

Three 50-page pads of 11" x 39" spindle layout graph paper
Two -- square pads of 13" round layout paper



Missing were:

The three clear acrylic templates

The 12 sample designs

The "How-to-do" VHS Tape



Question:

If I provide the large paper, would one of the members be willing to copy the 
clear acrylic templates onto the paper?   From there I would make the templates.



Also, if I provide the large paper, would one of the members be willing to copy 
the "sample Designs" onto the paper?  From there I would make the templates.



Lastly, would one of the members be willing to send me their VHS tape to copy 
and return their VHS



tape?



A word Doc showing the Legacy "Design Kit" information in the Legacy 
instruction manual is attached.




Nat

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM7C%3D9Br3ruhnGE2U-yWrhcUcqCWcwZCivt-pbs91h6tLSOqKQ%40mail.gmail.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it,

Re: Legacy Design Kit

2023-03-14 Thread Cole Andrews

Nat can email me so I can get his address.. mine is    coleandrew...@gmail.comSent from my iPhoneOn Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:Your right mac there isn’t anything about a piece of plexiglass I guess that’s why I don’t know anything about it lol The other thing that the design kit doesn’t have which need making is templates for all the combination bits   Bill  From: legacy-ornamental-mills@googlegroups.com  On Behalf Of M.W.FoscueSent: Tuesday, 14 March 2023 11:59 AMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: Legacy Design Kit According to the below images of the Design Kit - it states "The Legacy Design Kit consists of:and it lists the components.  Nowhere in that list is any mention of a "blank sheet of plexiglas".I suspect it was something the earlier owner added/used(?) - but was not a component of the kit when purchased new. Does anyone have a copy of the "3 - Router Bit Keys for easy identification of the bits"?A bought my Design Kit from someone in our Group - and it did not have them.I'd sure like to get a copy - if possible. The other question I have: Has anyone ever taken a Design Kit sheet (round, long rectangle, or both) to a copy shop, like Staples, FedEx, etc. and had copies made?  If so, how'd they turn out and what was the cost? Here's an early "Happy St Patrick's Day" wish to all of ya'll!!Mac-Original Message-From: <legacy-ornamental-mills@googlegroups.com>Sent: Mar 13, 2023 5:27 PMTo: <legacy-ornamental-mills@googlegroups.com>Subject: RE: Legacy Design Kit That’s great Cole I’m sure Nat will be contacting you soon ,you know I still don’t know what the large blank sheet of plexiglassIs for, maybe its just to keep the paper from getting creases in it ??? Bill From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Cole AndrewsSent: Tuesday, 14 March 2023 3:25 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Legacy Design Kit I might have some extra templates , when I bought mine they sent extra of some and none of the others , took awhile to get straight. On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon <natbac...@gmail.com> wrote:To all "Google Legacy Group" members: Included in a recent purchase was a box labeled "Design Kit".  The kit only contained:One large blank sheet of plexiglassThree 50-page pads of 11" x 39" spindle layout graph paperTwo -- square pads of 13" round layout paper Missing were:The three clear acrylic templatesThe 12 sample designsThe "How-to-do" VHS Tape Question:If I provide the large paper, would one of the members be willing to copy the clear acrylic templates onto the paper?   From there I would make the templates. Also, if I provide the large paper, would one of the members be willing to copy the "sample Designs" onto the paper?  From there I would make the templates. Lastly, would one of the members be willing to send me their VHS tape to copy and return their VHS tape? A word Doc showing the Legacy "Design Kit" information in the Legacy instruction manual is attached. Nat-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM7C%3D9Br3ruhnGE2U-yWrhcUcqCWcwZCivt-pbs91h6tLSOqKQ%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001101d955f2%247ec86850%247c5938f0%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/643afd6a-ff54-2368-776f-e4ec914e18a2%40earthlink.net.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mil

Re: Legacy Design Kit

Could be a DXF file too; they are both used in Auto Cad.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Mar 14, 2023 at 9:42 AM  wrote:

> Is it a DWG file? I found a site online that will convert it.
>
>
>
> Bill Henry
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Jim Riggen
> *Sent:* Tuesday, March 14, 2023 9:48 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Legacy Design Kit
>
>
>
> I don't know how to convert it or if it is even possibly.
>
>
>
> Jim
>
>
>
> On Tue, Mar 14, 2023, 7:45 AM  wrote:
>
> Jim,
>
>
>
> Can you post the AutoCAD drawing in a format that can be opened without
> AutoCAD software?
>
>
>
> Bill Henry
>
> Baltimore
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *jrig...@gmail.com
> *Sent:* Monday, March 13, 2023 6:02 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Re: Legacy Design Kit
>
>
>
> You can also buy Magnate bits directly from Magnate.
> https://www.magnate.net/default.asp
>
>
>
> I have an Autocad drawing of the router bit templates if that would help.
>
>
>
> Jim Riggen
>
> On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:
>
> Sunday March 12, 2023 @ 4pm PDT
>
>
>
> To: bulk...@mmnet.com.au
>
> Bill:
>
>
>
> Thank you so much for your offer.
>
> I'm new to Legacy Mills.  I've been persistent in buying as much as I can,
> to obtain tools that are as complete as possible.
>
> My objectives are to take one step at a time. The first is to get the
> tools and the next is to learn how to use them properly.
>
> That's where the design kit has become important to me.  Learning the
> correct way and not guessing.
>
>
>
> On the router bits, Magnate router bits are still available on eBay from
> eBay seller: "*mbauc*
> <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559>" located in 
> Fullerton,
> California, USA.
>
> That makes it easier to coordinate the Legacy Design Center guides to the
> description of the router bits by reference numbers.
>
>
>
> Anything you can do will help.  Is there anything that you are looking
> for?
>
> On a side note, yes my surname "Bacon" is English.  My family originated
> in England and has been in America since 1635, before it became the USA!
>
> I've been to both Sydney and Perth, back in the 1960's.  I was very
> impressed by the warm and friendly people and the locations!
>
>
>
> Sincerely,
>
> Nathaniel Bacon
>
> email: natb...@hotmail.com
>
> Vacaville, CA, USA
>
>
>
> On Sun, Mar 12, 2023 at 10:50 AM  wrote:
>
> Hi Nathaniel
>
> I would do this for you but I am in Australia, if you can’t get anyone
> privet message me by email and we will see what I can do
>
> I might be able to scan the templates and email them to you the problem
> with that is printing them the correct size
>
> One of the members with a laser cutter might be able to help you I had a
> template set once that was cut out of 1mm thick
>
> plastic worked ok for years. I might be able to help with the video too
> maybe. Also some members have extra sets they might sell you a set of
> templates .
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Nathaniel Bacon
> *Sent:* Sunday, 12 March 2023 5:06 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Legacy Design Kit
>
>
>
> To all "Google Legacy Group" members:
>
>
>
> Included in a recent purchase was a box labeled "Design Kit".  The kit
> only contained:
>
> One large blank sheet of plexiglass
>
> Three 50-page pads of 11" x 39" spindle layout graph paper
>
> Two -- square pads of 13" round layout paper
>
>
>
> Missing were:
>
> The three clear acrylic templates
>
> The 12 sample designs
>
> The "How-to-do" VHS Tape
>
>
>
> Question:
>
> If I provide the large paper, would one of the members be willing to copy
> the clear acrylic templates onto the paper?   From there I would make the
> templates.
>
>
>
> Also, if I provide the large paper, would one of the members be willing to
> copy the "sample Designs" onto the paper?  From there I would make the
> templates.
>
>
>
> Lastly, would one of the members be willing to send me their

Re: Legacy Design Kit

Jim you should be able to go into "Save as" and save it as PDF or something?
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Mar 14, 2023 at 8:48 AM Jim Riggen  wrote:

> I don't know how to convert it or if it is even possibly.
>
> Jim
>
> On Tue, Mar 14, 2023, 7:45 AM  wrote:
>
>> Jim,
>>
>>
>>
>> Can you post the AutoCAD drawing in a format that can be opened without
>> AutoCAD software?
>>
>>
>>
>> Bill Henry
>>
>> Baltimore
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
>> jrig...@gmail.com
>> *Sent:* Monday, March 13, 2023 6:02 PM
>> *To:* Legacy Ornamental Mills 
>> *Subject:* Re: Legacy Design Kit
>>
>>
>>
>> You can also buy Magnate bits directly from Magnate.
>> https://www.magnate.net/default.asp
>>
>>
>>
>> I have an Autocad drawing of the router bit templates if that would help.
>>
>>
>>
>> Jim Riggen
>>
>> On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:
>>
>> Sunday March 12, 2023 @ 4pm PDT
>>
>>
>>
>> To: bulk...@mmnet.com.au
>>
>> Bill:
>>
>>
>>
>> Thank you so much for your offer.
>>
>> I'm new to Legacy Mills.  I've been persistent in buying as much as I
>> can, to obtain tools that are as complete as possible.
>>
>> My objectives are to take one step at a time. The first is to get the
>> tools and the next is to learn how to use them properly.
>>
>> That's where the design kit has become important to me.  Learning the
>> correct way and not guessing.
>>
>>
>>
>> On the router bits, Magnate router bits are still available on eBay from
>> eBay seller: "*mbauc*
>> <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559>" located
>> in Fullerton, California, USA.
>>
>> That makes it easier to coordinate the Legacy Design Center guides to the
>> description of the router bits by reference numbers.
>>
>>
>>
>> Anything you can do will help.  Is there anything that you are looking
>> for?
>>
>> On a side note, yes my surname "Bacon" is English.  My family originated
>> in England and has been in America since 1635, before it became the USA!
>>
>> I've been to both Sydney and Perth, back in the 1960's.  I was very
>> impressed by the warm and friendly people and the locations!
>>
>>
>>
>> Sincerely,
>>
>> Nathaniel Bacon
>>
>> email: natb...@hotmail.com
>>
>> Vacaville, CA, USA
>>
>>
>>
>> On Sun, Mar 12, 2023 at 10:50 AM  wrote:
>>
>> Hi Nathaniel
>>
>> I would do this for you but I am in Australia, if you can’t get anyone
>> privet message me by email and we will see what I can do
>>
>> I might be able to scan the templates and email them to you the problem
>> with that is printing them the correct size
>>
>> One of the members with a laser cutter might be able to help you I had a
>> template set once that was cut out of 1mm thick
>>
>> plastic worked ok for years. I might be able to help with the video too
>> maybe. Also some members have extra sets they might sell you a set of
>> templates .
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com 
>> *On Behalf Of *Nathaniel Bacon
>> *Sent:* Sunday, 12 March 2023 5:06 PM
>> *To:* Legacy Ornamental Mills 
>> *Subject:* Legacy Design Kit
>>
>>
>>
>> To all "Google Legacy Group" members:
>>
>>
>>
>> Included in a recent purchase was a box labeled "Design Kit".  The kit
>> only contained:
>>
>> One large blank sheet of plexiglass
>>
>> Three 50-page pads of 11" x 39" spindle layout graph paper
>>
>> Two -- square pads of 13" round layout paper
>>
>>
>>
>> Missing were:
>>
>> The three clear acrylic templates
>>
>> The 12 sample designs
>>
>> The "How-to-do" VHS Tape
>>
>>
>>
>> Question:
>>
>> If I provide the large paper, would one of the members be willing to copy
>> the clear acrylic templates onto the paper?   From there I would make the
>> templates.
>>
>>
>>
>> Also, if

Re: Legacy Design Kit

2020-11-30 Thread 'Curt George' via Legacy Ornamental Mills

If he saves it under a different Format he should be able to.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Mar 14, 2023 at 7:45 AM  wrote:

> Jim,
>
>
>
> Can you post the AutoCAD drawing in a format that can be opened without
> AutoCAD software?
>
>
>
> Bill Henry
>
> Baltimore
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *jrig...@gmail.com
> *Sent:* Monday, March 13, 2023 6:02 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Re: Legacy Design Kit
>
>
>
> You can also buy Magnate bits directly from Magnate.
> https://www.magnate.net/default.asp
>
>
>
> I have an Autocad drawing of the router bit templates if that would help.
>
>
>
> Jim Riggen
>
> On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:
>
> Sunday March 12, 2023 @ 4pm PDT
>
>
>
> To: bulk...@mmnet.com.au
>
> Bill:
>
>
>
> Thank you so much for your offer.
>
> I'm new to Legacy Mills.  I've been persistent in buying as much as I can,
> to obtain tools that are as complete as possible.
>
> My objectives are to take one step at a time. The first is to get the
> tools and the next is to learn how to use them properly.
>
> That's where the design kit has become important to me.  Learning the
> correct way and not guessing.
>
>
>
> On the router bits, Magnate router bits are still available on eBay from
> eBay seller: "*mbauc*
> <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559>" located in 
> Fullerton,
> California, USA.
>
> That makes it easier to coordinate the Legacy Design Center guides to the
> description of the router bits by reference numbers.
>
>
>
> Anything you can do will help.  Is there anything that you are looking
> for?
>
> On a side note, yes my surname "Bacon" is English.  My family originated
> in England and has been in America since 1635, before it became the USA!
>
> I've been to both Sydney and Perth, back in the 1960's.  I was very
> impressed by the warm and friendly people and the locations!
>
>
>
> Sincerely,
>
> Nathaniel Bacon
>
> email: natb...@hotmail.com
>
> Vacaville, CA, USA
>
>
>
> On Sun, Mar 12, 2023 at 10:50 AM  wrote:
>
> Hi Nathaniel
>
> I would do this for you but I am in Australia, if you can’t get anyone
> privet message me by email and we will see what I can do
>
> I might be able to scan the templates and email them to you the problem
> with that is printing them the correct size
>
> One of the members with a laser cutter might be able to help you I had a
> template set once that was cut out of 1mm thick
>
> plastic worked ok for years. I might be able to help with the video too
> maybe. Also some members have extra sets they might sell you a set of
> templates .
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Nathaniel Bacon
> *Sent:* Sunday, 12 March 2023 5:06 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Legacy Design Kit
>
>
>
> To all "Google Legacy Group" members:
>
>
>
> Included in a recent purchase was a box labeled "Design Kit".  The kit
> only contained:
>
> One large blank sheet of plexiglass
>
> Three 50-page pads of 11" x 39" spindle layout graph paper
>
> Two -- square pads of 13" round layout paper
>
>
>
> Missing were:
>
> The three clear acrylic templates
>
> The 12 sample designs
>
> The "How-to-do" VHS Tape
>
>
>
> Question:
>
> If I provide the large paper, would one of the members be willing to copy
> the clear acrylic templates onto the paper?   From there I would make the
> templates.
>
>
>
> Also, if I provide the large paper, would one of the members be willing to
> copy the "sample Designs" onto the paper?  From there I would make the
> templates.
>
>
>
> Lastly, would one of the members be willing to send me their VHS tape to
> copy and return their VHS tape?
>
>
>
> A word Doc showing the Legacy "Design Kit" information in the Legacy
> instruction manual is attached.
>
>
>
> Nat
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit
> https:/

RE: Legacy Design Kit

2023-03-14 Thread wm.o.henry

Is it a DWG file? I found a site online that will convert it. 

 

Bill Henry

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Jim Riggen
Sent: Tuesday, March 14, 2023 9:48 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Legacy Design Kit

 

I don't know how to convert it or if it is even possibly.

 

Jim

 

On Tue, Mar 14, 2023, 7:45 AM mailto:wm.o.he...@gmail.com> > wrote:

Jim,

 

Can you post the AutoCAD drawing in a format that can be opened without AutoCAD 
software? 

 

Bill Henry

Baltimore

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
jrig...@gmail.com <mailto:jrig...@gmail.com> 
Sent: Monday, March 13, 2023 6:02 PM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: Legacy Design Kit

 

You can also buy Magnate bits directly from Magnate. 
https://www.magnate.net/default.asp

 

I have an Autocad drawing of the router bit templates if that would help.

 

Jim Riggen

On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:

Sunday March 12, 2023 @ 4pm PDT

 

To: bulk...@mmnet.com.au <mailto:bulk...@mmnet.com.au> 

Bill:

 

Thank you so much for your offer.

I'm new to Legacy Mills.  I've been persistent in buying as much as I can, to 
obtain tools that are as complete as possible.

My objectives are to take one step at a time. The first is to get the tools and 
the next is to learn how to use them properly.  

That's where the design kit has become important to me.  Learning the correct 
way and not guessing.

 

On the router bits, Magnate router bits are still available on eBay from eBay 
seller: " <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559> mbauc" 
located in Fullerton, California, USA.

That makes it easier to coordinate the Legacy Design Center guides to the 
description of the router bits by reference numbers. 

 

Anything you can do will help.  Is there anything that you are looking for?  

On a side note, yes my surname "Bacon" is English.  My family originated in 
England and has been in America since 1635, before it became the USA!  

I've been to both Sydney and Perth, back in the 1960's.  I was very impressed 
by the warm and friendly people and the locations! 

 

Sincerely, 

Nathaniel Bacon

email: natb...@hotmail.com <mailto:natb...@hotmail.com> 

Vacaville, CA, USA

 

On Sun, Mar 12, 2023 at 10:50 AM mailto:bulk...@mmnet.com.au> > wrote:

Hi Nathaniel 

I would do this for you but I am in Australia, if you can’t get anyone privet 
message me by email and we will see what I can do

I might be able to scan the templates and email them to you the problem with 
that is printing them the correct size 

One of the members with a laser cutter might be able to help you I had a 
template set once that was cut out of 1mm thick

plastic worked ok for years. I might be able to help with the video too maybe. 
Also some members have extra sets they might sell you a set of templates .

 

Bill

 

From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>  
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Nathaniel Bacon
Sent: Sunday, 12 March 2023 5:06 PM
To: Legacy Ornamental Mills mailto:legacy-orna...@googlegroups.com> >
Subject: Legacy Design Kit

 

To all "Google Legacy Group" members:

 

Included in a recent purchase was a box labeled "Design Kit".  The kit only 
contained:

One large blank sheet of plexiglass

Three 50-page pads of 11" x 39" spindle layout graph paper

Two -- square pads of 13" round layout paper

 

Missing were:

The three clear acrylic templates

The 12 sample designs

The "How-to-do" VHS Tape

 

Question:

If I provide the large paper, would one of the members be willing to copy the 
clear acrylic templates onto the paper?   From there I would make the templates.

 

Also, if I provide the large paper, would one of the members be willing to copy 
the "sample Designs" onto the paper?  From there I would make the templates.

 

Lastly, would one of the members be willing to send me their VHS tape to copy 
and return their VHS   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image001.png?part=0.1&view=1>
   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image002.png?part=0.2&view=1>
   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image003.png?part=0.3&view=1>
 tape?

 

A word Doc showing the Legacy "Design Kit" information in the Legacy 
instruction manual is attached.

 

Nat

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills"

RE: Legacy Design Kit

2023-03-14 Thread wm.o.henry

If you send it to me I may be able to figure out how to do it. I have some 
AutoCAD products that may do it

 

Thanks,

 

Bill Henry

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Jim Riggen
Sent: Tuesday, March 14, 2023 9:48 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Legacy Design Kit

 

I don't know how to convert it or if it is even possibly.

 

Jim

 

On Tue, Mar 14, 2023, 7:45 AM mailto:wm.o.he...@gmail.com> > wrote:

Jim,

 

Can you post the AutoCAD drawing in a format that can be opened without AutoCAD 
software? 

 

Bill Henry

Baltimore

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
jrig...@gmail.com <mailto:jrig...@gmail.com> 
Sent: Monday, March 13, 2023 6:02 PM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: Legacy Design Kit

 

You can also buy Magnate bits directly from Magnate. 
https://www.magnate.net/default.asp

 

I have an Autocad drawing of the router bit templates if that would help.

 

Jim Riggen

On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:

Sunday March 12, 2023 @ 4pm PDT

 

To: bulk...@mmnet.com.au <mailto:bulk...@mmnet.com.au> 

Bill:

 

Thank you so much for your offer.

I'm new to Legacy Mills.  I've been persistent in buying as much as I can, to 
obtain tools that are as complete as possible.

My objectives are to take one step at a time. The first is to get the tools and 
the next is to learn how to use them properly.  

That's where the design kit has become important to me.  Learning the correct 
way and not guessing.

 

On the router bits, Magnate router bits are still available on eBay from eBay 
seller: " <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559> mbauc" 
located in Fullerton, California, USA.

That makes it easier to coordinate the Legacy Design Center guides to the 
description of the router bits by reference numbers. 

 

Anything you can do will help.  Is there anything that you are looking for?  

On a side note, yes my surname "Bacon" is English.  My family originated in 
England and has been in America since 1635, before it became the USA!  

I've been to both Sydney and Perth, back in the 1960's.  I was very impressed 
by the warm and friendly people and the locations! 

 

Sincerely, 

Nathaniel Bacon

email: natb...@hotmail.com <mailto:natb...@hotmail.com> 

Vacaville, CA, USA

 

On Sun, Mar 12, 2023 at 10:50 AM mailto:bulk...@mmnet.com.au> > wrote:

Hi Nathaniel 

I would do this for you but I am in Australia, if you can’t get anyone privet 
message me by email and we will see what I can do

I might be able to scan the templates and email them to you the problem with 
that is printing them the correct size 

One of the members with a laser cutter might be able to help you I had a 
template set once that was cut out of 1mm thick

plastic worked ok for years. I might be able to help with the video too maybe. 
Also some members have extra sets they might sell you a set of templates .

 

Bill

 

From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>  
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Nathaniel Bacon
Sent: Sunday, 12 March 2023 5:06 PM
To: Legacy Ornamental Mills mailto:legacy-orna...@googlegroups.com> >
Subject: Legacy Design Kit

 

To all "Google Legacy Group" members:

 

Included in a recent purchase was a box labeled "Design Kit".  The kit only 
contained:

One large blank sheet of plexiglass

Three 50-page pads of 11" x 39" spindle layout graph paper

Two -- square pads of 13" round layout paper

 

Missing were:

The three clear acrylic templates

The 12 sample designs

The "How-to-do" VHS Tape

 

Question:

If I provide the large paper, would one of the members be willing to copy the 
clear acrylic templates onto the paper?   From there I would make the templates.

 

Also, if I provide the large paper, would one of the members be willing to copy 
the "sample Designs" onto the paper?  From there I would make the templates.

 

Lastly, would one of the members be willing to send me their VHS tape to copy 
and return their VHS   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image001.png?part=0.1&view=1>
   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image002.png?part=0.2&view=1>
   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image003.png?part=0.3&view=1>
 tape?

 

A word Doc showing the Legacy "Design Kit" information in the Legacy 
instruction manual is attached.

 

Nat

-- 
You received this message because you are subscribed to the

Re: Legacy Design Kit

2023-03-14 Thread Jim Riggen

I don't know how to convert it or if it is even possibly.

Jim

On Tue, Mar 14, 2023, 7:45 AM  wrote:

> Jim,
>
>
>
> Can you post the AutoCAD drawing in a format that can be opened without
> AutoCAD software?
>
>
>
> Bill Henry
>
> Baltimore
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *jrig...@gmail.com
> *Sent:* Monday, March 13, 2023 6:02 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Re: Legacy Design Kit
>
>
>
> You can also buy Magnate bits directly from Magnate.
> https://www.magnate.net/default.asp
>
>
>
> I have an Autocad drawing of the router bit templates if that would help.
>
>
>
> Jim Riggen
>
> On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:
>
> Sunday March 12, 2023 @ 4pm PDT
>
>
>
> To: bulk...@mmnet.com.au
>
> Bill:
>
>
>
> Thank you so much for your offer.
>
> I'm new to Legacy Mills.  I've been persistent in buying as much as I can,
> to obtain tools that are as complete as possible.
>
> My objectives are to take one step at a time. The first is to get the
> tools and the next is to learn how to use them properly.
>
> That's where the design kit has become important to me.  Learning the
> correct way and not guessing.
>
>
>
> On the router bits, Magnate router bits are still available on eBay from
> eBay seller: "*mbauc*
> <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559>" located in 
> Fullerton,
> California, USA.
>
> That makes it easier to coordinate the Legacy Design Center guides to the
> description of the router bits by reference numbers.
>
>
>
> Anything you can do will help.  Is there anything that you are looking
> for?
>
> On a side note, yes my surname "Bacon" is English.  My family originated
> in England and has been in America since 1635, before it became the USA!
>
> I've been to both Sydney and Perth, back in the 1960's.  I was very
> impressed by the warm and friendly people and the locations!
>
>
>
> Sincerely,
>
> Nathaniel Bacon
>
> email: natb...@hotmail.com
>
> Vacaville, CA, USA
>
>
>
> On Sun, Mar 12, 2023 at 10:50 AM  wrote:
>
> Hi Nathaniel
>
> I would do this for you but I am in Australia, if you can’t get anyone
> privet message me by email and we will see what I can do
>
> I might be able to scan the templates and email them to you the problem
> with that is printing them the correct size
>
> One of the members with a laser cutter might be able to help you I had a
> template set once that was cut out of 1mm thick
>
> plastic worked ok for years. I might be able to help with the video too
> maybe. Also some members have extra sets they might sell you a set of
> templates .
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Nathaniel Bacon
> *Sent:* Sunday, 12 March 2023 5:06 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Legacy Design Kit
>
>
>
> To all "Google Legacy Group" members:
>
>
>
> Included in a recent purchase was a box labeled "Design Kit".  The kit
> only contained:
>
> One large blank sheet of plexiglass
>
> Three 50-page pads of 11" x 39" spindle layout graph paper
>
> Two -- square pads of 13" round layout paper
>
>
>
> Missing were:
>
> The three clear acrylic templates
>
> The 12 sample designs
>
> The "How-to-do" VHS Tape
>
>
>
> Question:
>
> If I provide the large paper, would one of the members be willing to copy
> the clear acrylic templates onto the paper?   From there I would make the
> templates.
>
>
>
> Also, if I provide the large paper, would one of the members be willing to
> copy the "sample Designs" onto the paper?  From there I would make the
> templates.
>
>
>
> Lastly, would one of the members be willing to send me their VHS tape to
> copy and return their VHS tape?
>
>
>
> A word Doc showing the Legacy "Design Kit" information in the Legacy
> instruction manual is attached.
>
>
>
> Nat
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com
> <https://groups.google.

RE: Legacy Design Kit

2023-03-14 Thread wm.o.henry

Jim,

 

Can you post the AutoCAD drawing in a format that can be opened without AutoCAD 
software? 

 

Bill Henry

Baltimore

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of jrig...@gmail.com
Sent: Monday, March 13, 2023 6:02 PM
To: Legacy Ornamental Mills 
Subject: Re: Legacy Design Kit

 

You can also buy Magnate bits directly from Magnate. 
https://www.magnate.net/default.asp

 

I have an Autocad drawing of the router bit templates if that would help.

 

Jim Riggen

On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:

Sunday March 12, 2023 @ 4pm PDT

 

To: bulk...@mmnet.com.au <mailto:bulk...@mmnet.com.au> 

Bill:

 

Thank you so much for your offer.

I'm new to Legacy Mills.  I've been persistent in buying as much as I can, to 
obtain tools that are as complete as possible.

My objectives are to take one step at a time. The first is to get the tools and 
the next is to learn how to use them properly.  

That's where the design kit has become important to me.  Learning the correct 
way and not guessing.

 

On the router bits, Magnate router bits are still available on eBay from eBay 
seller: " <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559> mbauc" 
located in Fullerton, California, USA.

That makes it easier to coordinate the Legacy Design Center guides to the 
description of the router bits by reference numbers. 

 

Anything you can do will help.  Is there anything that you are looking for?  

On a side note, yes my surname "Bacon" is English.  My family originated in 
England and has been in America since 1635, before it became the USA!  

I've been to both Sydney and Perth, back in the 1960's.  I was very impressed 
by the warm and friendly people and the locations! 

 

Sincerely, 

Nathaniel Bacon

email: natb...@hotmail.com <mailto:natb...@hotmail.com> 

Vacaville, CA, USA

 

On Sun, Mar 12, 2023 at 10:50 AM mailto:bulk...@mmnet.com.au> > wrote:

Hi Nathaniel 

I would do this for you but I am in Australia, if you can’t get anyone privet 
message me by email and we will see what I can do

I might be able to scan the templates and email them to you the problem with 
that is printing them the correct size 

One of the members with a laser cutter might be able to help you I had a 
template set once that was cut out of 1mm thick

plastic worked ok for years. I might be able to help with the video too maybe. 
Also some members have extra sets they might sell you a set of templates .

 

Bill

 

From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>  
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Nathaniel Bacon
Sent: Sunday, 12 March 2023 5:06 PM
To: Legacy Ornamental Mills mailto:legacy-orna...@googlegroups.com> >
Subject: Legacy Design Kit

 

To all "Google Legacy Group" members:

 

Included in a recent purchase was a box labeled "Design Kit".  The kit only 
contained:

One large blank sheet of plexiglass

Three 50-page pads of 11" x 39" spindle layout graph paper

Two -- square pads of 13" round layout paper

 

Missing were:

The three clear acrylic templates

The 12 sample designs

The "How-to-do" VHS Tape

 

Question:

If I provide the large paper, would one of the members be willing to copy the 
clear acrylic templates onto the paper?   From there I would make the templates.

 

Also, if I provide the large paper, would one of the members be willing to copy 
the "sample Designs" onto the paper?  From there I would make the templates.

 

Lastly, would one of the members be willing to send me their VHS tape to copy 
and return their VHS   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image001.png?part=0.1&view=1>
   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image002.png?part=0.2&view=1>
   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image003.png?part=0.3&view=1>
 tape?

 

A word Doc showing the Legacy "Design Kit" information in the Legacy 
instruction manual is attached.

 

Nat

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To

Re: Legacy Design Kit

2023-03-13 Thread jrig...@gmail.com

You can also buy Magnate bits directly from 
Magnate. https://www.magnate.net/default.asp

I have an Autocad drawing of the router bit templates if that would help.

Jim Riggen

On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:

> Sunday March 12, 2023 @ 4pm PDT
>
> To: bulk...@mmnet.com.au
> Bill:
>
> Thank you so much for your offer.
> I'm new to Legacy Mills.  I've been persistent in buying as much as I can, 
> to obtain tools that are as complete as possible.
> My objectives are to take one step at a time. The first is to get the 
> tools and the next is to learn how to use them properly.  
> That's where the design kit has become important to me.  Learning the 
> correct way and not guessing.
>
> On the router bits, Magnate router bits are still available on eBay from 
> eBay seller: "mbauc 
> <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559>" located in 
> Fullerton, 
> California, USA.
> That makes it easier to coordinate the Legacy Design Center guides to the 
> description of the router bits by reference numbers. 
>
> Anything you can do will help.  Is there anything that you are looking 
> for?  
> On a side note, yes my surname "Bacon" is English.  My family originated 
> in England and has been in America since 1635, before it became the USA!  
> I've been to both Sydney and Perth, back in the 1960's.  I was very 
> impressed by the warm and friendly people and the locations! 
>
> Sincerely, 
> Nathaniel Bacon
> email: natb...@hotmail.com
> Vacaville, CA, USA
>
> On Sun, Mar 12, 2023 at 10:50 AM  wrote:
>
>> Hi Nathaniel 
>>
>> I would do this for you but I am in Australia, if you can’t get anyone 
>> privet message me by email and we will see what I can do
>>
>> I might be able to scan the templates and email them to you the problem 
>> with that is printing them the correct size 
>>
>> One of the members with a laser cutter might be able to help you I had a 
>> template set once that was cut out of 1mm thick
>>
>> plastic worked ok for years. I might be able to help with the video too 
>> maybe. Also some members have extra sets they might sell you a set of 
>> templates .
>>
>>  
>>
>> Bill
>>
>>  
>>
>> *From:* legacy-orna...@googlegroups.com  
>> *On Behalf Of *Nathaniel Bacon
>> *Sent:* Sunday, 12 March 2023 5:06 PM
>> *To:* Legacy Ornamental Mills 
>> *Subject:* Legacy Design Kit
>>
>>  
>>
>> To all "Google Legacy Group" members:
>>
>>  
>>
>> Included in a recent purchase was a box labeled "Design Kit".  The kit 
>> only contained:
>>
>> One large blank sheet of plexiglass
>>
>> Three 50-page pads of 11" x 39" spindle layout graph paper
>>
>> Two -- square pads of 13" round layout paper
>>
>>  
>>
>> Missing were:
>>
>> The three clear acrylic templates
>>
>> The 12 sample designs
>>
>> The "How-to-do" VHS Tape
>>
>>  
>>
>> Question:
>>
>> If I provide the large paper, would one of the members be willing to copy 
>> the clear acrylic templates onto the paper?   From there I would make the 
>> templates.
>>
>>  
>>
>> Also, if I provide the large paper, would one of the members be willing 
>> to copy the "sample Designs" onto the paper?  From there I would make the 
>> templates.
>>
>>  
>>
>> Lastly, would one of the members be willing to send me their VHS tape to 
>> copy and return their VHS tape?
>>
>>  
>>
>> A word Doc showing the Legacy "Design Kit" information in the Legacy 
>> instruction manual is attached.
>>
>>  
>>
>> Nat
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com
>>  
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from

Re: Winner of the Legacy design kit.

2020-12-01 Thread Tim Ziegler

Well thats sure great to hear. yay!
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Dec 1, 2020 at 1:33 AM  wrote:

> Yay congrats Tim I had a feeling you would win good for you buddy very
> very useful tool the design kit
>
> You can see what a whole project looks like without cutting a single chip
>
> And unlike a computer it works without power lol
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Tuesday, 1 December 2020 5:02 PM
> *To:* Legacy ornamental mills 
> *Subject:* Winner of the Legacy design kit.
>
>
>
> Hello Everyone.
>
>
>
> Let me start by saying the Google has not been my friend this month...
>
>
>
> Starting on Nov 3 the Google web site went with the new format to all
> Groups.
>
> I was not aware of this change over until NOV 5.
> When I could not check on the number of posting this month for our/this
> contest.
>
>
>
> So all posting needed to be counted by hand.(BY ME!) And Yesterday! I
> almost had a stroke when I saw 85 new postings, in one day! ;-)
>
>
>
> I can say this Month has been one for the record books. (if those record
> books were still in use.) ;-p
>
>
>
> The top three posters .
>
>
>
> In 3rd place with 71 postings. is Mac.
>
> In 2nd place with 116 postings is BILL.
>
>
>
> And the winner of this design kit. with 125 postings is.
>
>
>
> Tim Z. .
>
>
>
> Tim, I will be sending you, your package latter this week.
>
>
>
> I would like to Thank you all for a Great month of some very interesting
> topics and good information. Its been a lot of FUN.
>
> Thank you all.
>
>
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/703602592.1946362.1606802490325%40mail.yahoo.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/703602592.1946362.1606802490325%40mail.yahoo.com?utm_medium=email&utm_source=footer>
> .
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
>  Virus-free.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
> <#m_-6874995627259131372_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001101d6c7b4%242de79240%2489b6b6c0%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/001101d6c7b4%242de79240%2489b6b6c0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHa1-0eaSY5XLrZ1SOBU5dNek2b7Xyu8gq5Yyedtvc65A%40mail.gmail.com.

RE: Winner of the Legacy design kit.

2020-11-30 Thread bulkeley

Yay congrats Tim I had a feeling you would win good for you buddy very very 
useful tool the design kit 

You can see what a whole project looks like without cutting a single chip

And unlike a computer it works without power lol

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Tuesday, 1 December 2020 5:02 PM
To: Legacy ornamental mills 
Subject: Winner of the Legacy design kit.

 

Hello Everyone.

 

Let me start by saying the Google has not been my friend this month...

 

Starting on Nov 3 the Google web site went with the new format to all Groups.

I was not aware of this change over until NOV 5. 
When I could not check on the number of posting this month for our/this contest.

 

So all posting needed to be counted by hand.(BY ME!) And Yesterday! I almost 
had a stroke when I saw 85 new postings, in one day! ;-)

 

I can say this Month has been one for the record books. (if those record books 
were still in use.) ;-p

 

The top three posters .

 

In 3rd place with 71 postings. is Mac.

In 2nd place with 116 postings is BILL.

 

And the winner of this design kit. with 125 postings is.

 

Tim Z. .

 

Tim, I will be sending you, your package latter this week.

 

I would like to Thank you all for a Great month of some very interesting topics 
and good information. Its been a lot of FUN.

Thank you all.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/703602592.1946362.1606802490325%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/703602592.1946362.1606802490325%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001101d6c7b4%242de79240%2489b6b6c0%24%40mmnet.com.au.

Winner of the Legacy design kit.

Hello Everyone.
Let me start by saying the Google has not been my friend this month...
Starting on Nov 3 the Google web site went with the new format to all Groups.I 
was not aware of this change over until NOV 5. 
When I could not check on the number of posting this month for our/this contest.

So all posting needed to be counted by hand.(BY ME!) And Yesterday! I almost 
had a stroke when I saw 85 new postings, in one day! ;-)
I can say this Month has been one for the record books. (if those record books 
were still in use.) ;-p
The top three posters .
In 3rd place with 71 postings. is Mac.In 2nd place with 116 postings is BILL.
And the winner of this design kit. with 125 postings is.
Tim Z. .
Tim, I will be sending you, your package latter this week.
I would like to Thank you all for a Great month of some very interesting topics 
and good information. Its been a lot of FUN.Thank you all.
C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/703602592.1946362.1606802490325%40mail.yahoo.com.

Re: November 1st. Who wants a Legacy Design kit?

2020-11-24 Thread 'Curt George' via Legacy Ornamental Mills

Hello Everyone,  6 more day left in this month.
The posting have been up this month,  so far its been a horse race between 
Bill, Mac and Tim Z.
for the most postings.  Its been a lot of fun reading everyone reply's and 
ideas.
Please keep up the good work. 

C.A.G.

On Sunday, November 1, 2020 at 5:56:40 PM UTC-5 Curt George wrote:

> Hello everyone.
>
> Who wants to win a Legacy Design kit?  In the past a number of our group 
> were all looking to buy one.  Since I found one.  This could be a good 
> chance that someone here could win it.
> What I would like to do, This month, Whom ever posts the most ,will win 
> this design kit.
>
> The Google system counts every posting everyone makes, So you don't have 
> to make your own topics, if you don't want to to win this design kit, all 
> you need to do is correspondence with the group.
>  By sharing ideas we all grow, by covering the ideas in more detail, gives 
> up more to think about.  So as I see it, this will be a win, win... for 
> everyone. 
> NOW lets keep this on the Up and Up. Lets have some fun, and start 
> talking. ;-)
>
> C.A.G.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1872b601-872b-4116-810f-fe818ce500f3n%40googlegroups.com.

November 1st. Who wants a Legacy Design kit?

2020-11-01 Thread 'Curt George' via Legacy Ornamental Mills

Hello everyone.
Who wants to win a Legacy Design kit?  In the past a number of our group were 
all looking to buy one.  Since I found one.  This could be a good chance that 
someone here could win it.What I would like to do, This month, Whom ever posts 
the most ,will win this design kit.
The Google system counts every posting everyone makes, So you don't have to 
make your own topics, if you don't want to to win this design kit, all you need 
to do is correspondence with the group. By sharing ideas we all grow, by 
covering the ideas in more detail, gives up more to think about.  So as I see 
it, this will be a win, win... for everyone. NOW lets keep this on the Up and 
Up. Lets have some fun, and start talking. ;-)
C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/265445270.760906.1604271396480%40mail.yahoo.com.

Re: legacy design kit

2019-09-07 Thread Paul Richmond

There is a video on the design kit located in the Videos directory of the 
following link;

https://drive.google.com/drive/folders/122Gx6u5a9GiXFQBPtbKwOdJ6f_kVnw3t?usp=sharing

Not the greatest quality but better than nothing.

Paul

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/273c25b5-f37b-4b18-a892-a28de27d87bf%40googlegroups.com.

RE: legacy design kit

2019-08-24 Thread Stan Partin

Thx.

Sent from Mail for Windows 10

From: rtjurg...@gmail.com
Sent: Saturday, August 24, 2019 8:08 PM
To: legacy-ornamental-mills@googlegroups.com; Stan Partin; 
legacy-ornamental-mills@googlegroups.com
Subject: RE: legacy design kit

https://minneapolis.craigslist.org/hnp/tls/d/northfield-legacy-ornamental-milling/6961228117.html

I took a look at the craigslist posting. Looks good!
Sent from Yahoo Mail on Android

On Sat, Aug 24, 2019 at 7:26 PM, Stan Partin
 wrote:
Hi all,
I have a Legacy 60" Ornamental Mill model EX 1000 with EX floor stand package. 
I am probably never going to use it due to space limitations. I  am considering 
offers. It is listed on Craigslist, Northfield, MN.
Have  look
Stan
 
Sent from Mail for Windows 10
 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Saturday, August 24, 2019 2:40 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy design kit
 
HI Jim
 
take a photo. You know what they say, "a photo is worth a 1000 words".  :-)
 
C.A.G.
 
On Saturday, August 24, 2019, 02:58:40 PM EDT, 4 Jim Carpenter 
 wrote: 
 
 
Yes, support  is great, so while all are reading. I have a .25x gear with
16 flat edged double back plates but only a red index 36 with 12 flat edges.
do they go together and what value (s) if and not ?
 
On Thu, Aug 15, 2019 at 6:41 AM Brafield Bodger  wrote:
I keep getting the feeling I've been shortchanged.
 
Good news is I have now received the headstock screw to enable me to mount the 
supernova chuck.  Wasn't cheap but this was the only one I found that had the 
right screw thread so I think I've saves a few £ pounds by not having to 
purchase a new insert.
 
Think that is the lot for my wallet for now so I suppose I better get on and 
actually try and make something :)
 
Thanks for all the advice and support folks.
 
Ray
 
 
 
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/daba69ff-7372-4d87-b604-9a3f24780bb8%40googlegroups.com.
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CA%2BTVV5scKU%2B6fj8wAyPzTa-uG9UGRBR8_JUAR%2BgkEEYRt_A8ag%40mail.gmail.com.
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2112128153.1166836.1566675649366%40mail.yahoo.com.
 
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/5d61d5b2.1c69fb81.2814d.0ee4SMTPIN_ADDED_MISSING%40gmr-mx.google.com.
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/250261216.1204260.1566695310704%40mail.yahoo.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/5d61e6b4.1c69fb81.632df.b8d6SMTPIN_ADDED_MISSING%40gmr-mx.google.com.

RE: legacy design kit

2019-08-24 Thread rtjurg...@gmail.com

https://minneapolis.craigslist.org/hnp/tls/d/northfield-legacy-ornamental-milling/6961228117.html
I took a look at the craigslist posting. Looks good!

Sent from Yahoo Mail on Android 
 
  On Sat, Aug 24, 2019 at 7:26 PM, Stan Partin wrote:   
#yiv6715920036 #yiv6715920036 -- _filtered #yiv6715920036 
{font-family:Helvetica;panose-1:2 11 5 4 2 2 2 2 2 4;} _filtered #yiv6715920036 
{panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv6715920036 
{font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;}#yiv6715920036 
#yiv6715920036 p.yiv6715920036MsoNormal, #yiv6715920036 
li.yiv6715920036MsoNormal, #yiv6715920036 div.yiv6715920036MsoNormal 
{margin:0in;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv6715920036
 a:link, #yiv6715920036 span.yiv6715920036MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv6715920036 
.yiv6715920036MsoChpDefault {} _filtered #yiv6715920036 {margin:1.0in 1.0in 
1.0in 1.0in;}#yiv6715920036 div.yiv6715920036WordSection1 {}#yiv6715920036 
Hi all,

I have a Legacy 60" Ornamental Mill model EX 1000 with EX floor stand package. 
I am probably never going to use it due to space limitations. I  am considering 
offers. It is listed on Craigslist, Northfield, MN.

Have  look

Stan

  

Sent from Mail for Windows 10

  

From: 'Curt George' via Legacy Ornamental Mills
Sent: Saturday, August 24, 2019 2:40 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy design kit

  

HI Jim

  

take a photo. You know what they say, "a photo is worth a 1000 words".  :-)

  

C.A.G.

  

On Saturday, August 24, 2019, 02:58:40 PM EDT, 4 Jim Carpenter 
 wrote: 

  

  

Yes, support  is great, so while all are reading. I have a .25x gear with

16 flat edged double back plates but only a red index 36 with 12 flat edges.

do they go together and what value (s) if and not ?

  

On Thu, Aug 15, 2019 at 6:41 AM Brafield Bodger  wrote:


I keep getting the feeling I've been shortchanged.

  

Good news is I have now received the headstock screw to enable me to mount the 
supernova chuck.  Wasn't cheap but this was the only one I found that had the 
right screw thread so I think I've saves a few £ pounds by not having to 
purchase a new insert.

  

Think that is the lot for my wallet for now so I suppose I better get on and 
actually try and make something :)

  

Thanks for all the advice and support folks.

  

Ray

  

  

  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/daba69ff-7372-4d87-b604-9a3f24780bb8%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CA%2BTVV5scKU%2B6fj8wAyPzTa-uG9UGRBR8_JUAR%2BgkEEYRt_A8ag%40mail.gmail.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2112128153.1166836.1566675649366%40mail.yahoo.com.

  


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/5d61d5b2.1c69fb81.2814d.0ee4SMTPIN_ADDED_MISSING%40gmr-mx.google.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/250261216.1204260.1566695310704%40mail.yahoo.com.

RE: legacy design kit

2019-08-24 Thread Stan Partin

Hi all,
I have a Legacy 60" Ornamental Mill model EX 1000 with EX floor stand package. 
I am probably never going to use it due to space limitations. I  am considering 
offers. It is listed on Craigslist, Northfield, MN.
Have  look
Stan

Sent from Mail for Windows 10

From: 'Curt George' via Legacy Ornamental Mills
Sent: Saturday, August 24, 2019 2:40 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy design kit

HI Jim

take a photo. You know what they say, "a photo is worth a 1000 words".  :-)

C.A.G.

On Saturday, August 24, 2019, 02:58:40 PM EDT, 4 Jim Carpenter 
 wrote: 


Yes, support  is great, so while all are reading. I have a .25x gear with
16 flat edged double back plates but only a red index 36 with 12 flat edges.
do they go together and what value (s) if and not ?

On Thu, Aug 15, 2019 at 6:41 AM Brafield Bodger  wrote:
I keep getting the feeling I've been shortchanged.

Good news is I have now received the headstock screw to enable me to mount the 
supernova chuck.  Wasn't cheap but this was the only one I found that had the 
right screw thread so I think I've saves a few £ pounds by not having to 
purchase a new insert.

Think that is the lot for my wallet for now so I suppose I better get on and 
actually try and make something :)

Thanks for all the advice and support folks.

Ray



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/daba69ff-7372-4d87-b604-9a3f24780bb8%40googlegroups.com.
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CA%2BTVV5scKU%2B6fj8wAyPzTa-uG9UGRBR8_JUAR%2BgkEEYRt_A8ag%40mail.gmail.com.
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2112128153.1166836.1566675649366%40mail.yahoo.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/5d61d5b2.1c69fb81.2814d.0ee4SMTPIN_ADDED_MISSING%40gmr-mx.google.com.

Re: legacy design kit

2019-08-24 Thread 'Curt George' via Legacy Ornamental Mills

HI Jim
take a photo. You know what they say, "a photo is worth a 1000 words". :-)
C.A.G.
On Saturday, August 24, 2019, 02:58:40 PM EDT, 4 Jim Carpenter
wrote:

Yes, support is great, so while all are reading. I have a .25x gear with16
flat edged double back plates but only a red index 36 with 12 flat edges.do
they go together and what value (s) if and not ?

On Thu, Aug 15, 2019 at 6:41 AM Brafield Bodger wrote:

I keep getting the feeling I've been shortchanged.
Good news is I have now received the headstock screw to enable me to mount the
supernova chuck. Wasn't cheap but this was the only one I found that had the
right screw thread so I think I've saves a few £ pounds by not having to
purchase a new insert.
Think that is the lot for my wallet for now so I suppose I better get on and
actually try and make something :)
Thanks for all the advice and support folks.
Ray

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/daba69ff-7372-4d87-b604-9a3f24780bb8%40googlegroups.com.

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CA%2BTVV5scKU%2B6fj8wAyPzTa-uG9UGRBR8_JUAR%2BgkEEYRt_A8ag%40mail.gmail.com.

Re: legacy design kit

2019-08-24 Thread 4 Jim Carpenter

Yes, support  is great, so while all are reading. I have a .25x gear with
16 flat edged double back plates but only a red index 36 with 12 flat edges.
do they go together and what value (s) if and not ?

On Thu, Aug 15, 2019 at 6:41 AM Brafield Bodger  wrote:

> I keep getting the feeling I've been shortchanged.
>
> Good news is I have now received the headstock screw to enable me to mount
> the supernova chuck.  Wasn't cheap but this was the only one I found that
> had the right screw thread so I think I've saves a few £ pounds by not
> having to purchase a new insert.
>
> Think that is the lot for my wallet for now so I suppose I better get on
> and actually try and make something :)
>
> Thanks for all the advice and support folks.
>
> Ray
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/daba69ff-7372-4d87-b604-9a3f24780bb8%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CA%2BTVV5scKU%2B6fj8wAyPzTa-uG9UGRBR8_JUAR%2BgkEEYRt_A8ag%40mail.gmail.com.

Re: legacy design kit

2019-08-15 Thread Brafield Bodger

I keep getting the feeling I've been shortchanged.

Good news is I have now received the headstock screw to enable me to mount 
the supernova chuck.  Wasn't cheap but this was the only one I found that 
had the right screw thread so I think I've saves a few £ pounds by not 
having to purchase a new insert.

Think that is the lot for my wallet for now so I suppose I better get on 
and actually try and make something :)

Thanks for all the advice and support folks.

Ray



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/daba69ff-7372-4d87-b604-9a3f24780bb8%40googlegroups.com.

RE: legacy design kit

2019-08-15 Thread Ray

Well – I bought the design kit when I got the machine.  Mine didn’t contain 
either the booklet or the DVD ☹

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Wednesday, August 14, 2019 11:08 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: legacy design kit

 

Ok for all newbies out there the design kit is used to make drawings of spirals 
and shapes of things you can make on your mills

Sort of like blue prints. Here is part of the lessons that used to be available 
on line sorry but due to size I had to remove the video parts. And I don’t have 
lesson 3 but you get the idea maybe ray can get the instructions from legacy.

 

Bill 

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEMkKbXRWmMNNjJaQZ3yRfdsBAA%3D%3D%40sky.com.

Re: legacy design kit

2017-02-24 Thread Jim Riggen

Brandon,

Is there a way to convert a Sketchup file into an AutoCAD file?  I'm quite 
familiar with autocad (used it at work) but not with sketchup.

Jim

On Wednesday, July 9, 2014 at 8:52:15 PM UTC-5, Brandon Khoury wrote:

> Ok, this went quicker than I thought. I got home early tonight  and had 
> some time to hash this out. I have attached the Bit Profiles needed, along 
> with a few screenshots to help visualize the process.
> First, save the Bit Profiles to a folder that you can easily locate. You 
> will need that file location to load them into sketchup. You will also need 
> to find and install the Grid plugin. If I recall correctly, it can be found 
> in the extension warehouse. I have listed out the process and how they 
> correspond to the screenshots.
>
> 1) Set view to Parallel Projection and set the view to Top.
> 2) Go to Tools and open Components
> 3) Click the menu button on the side of the Components window and click 
> Open Collection. (Screenshot 1)
> 4) Locate the Bit Profiles to load them.
> 5) Go to Tools, and select Grid from the bottom of the list.
> 6) Set the scale by typing 1" into the Measurements box at the bottom 
> right. Then press enter to set the scale.
> 7) Click to set the start point, drag to set the length along the x-axis 
> then click again. Then drag up to set the y-axis. (Screenshot 2)
> 8) Use the line tool, as normal, to create any flat surfaces.
> 9) Drag and drop the desired profile onto the grid. (Screenshot 3)
> 10) The side edges of the bits are still in place to help identify 
> overlapping, but can be erased if desired to clean up the image. 
> (Screenshot 4)
>
> That's the quick and dirty version. Let me know if you have any other 
> questions. 
> By the way, I created the profiles by outlining the profiles that were 
> distributed by Tracy at Legacy. Hopefully, distributing my sketchup 
> versions doesn't create any issue.
>
> Enjoy!
> Brandon
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-07-31 Thread Brandon Khoury

I'm curious to know if anyone has tried out the sketchup method for designing 
spindles,  so I thought I would post a reply to keep the thread active.

Brandon

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-07-15 Thread Brandon Khoury

Did anyone get a chance to try out this method? I'm curious to hear your 
experience.  Especially, for those who have used the paper design kit, how this 
compares to the pen/paper method. Also,  are there any suggestions/tips to make 
this easier to use? 

I look forward to hearing your thoughts. 
Brandon

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-07-10 Thread Brandon Khoury

A quick FYI. You will probably notice that there are some profiles that are 
missing. I am still working on creating them. I haven't had much time to 
dedicate to them lately, but I will upload them when once I get them 
finished.

Brandon

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-07-10 Thread Stan Shuford

That's great Brandon. I'm in the process of learnining Sketchup and this
will help. Aspire (my CNC software) has recently announced Sketchup import
for tool path generation. Haven't tried it yet.
Thanks!

Stan Shuford
s...@shuford.com


On Wed, Jul 9, 2014 at 9:52 PM, Brandon Khoury  wrote:

> Ok, this went quicker than I thought. I got home early tonight  and had
> some time to hash this out. I have attached the Bit Profiles needed, along
> with a few screenshots to help visualize the process.
> First, save the Bit Profiles to a folder that you can easily locate. You
> will need that file location to load them into sketchup. You will also need
> to find and install the Grid plugin. If I recall correctly, it can be found
> in the extension warehouse. I have listed out the process and how they
> correspond to the screenshots.
>
> 1) Set view to Parallel Projection and set the view to Top.
> 2) Go to Tools and open Components
> 3) Click the menu button on the side of the Components window and click
> Open Collection. (Screenshot 1)
> 4) Locate the Bit Profiles to load them.
> 5) Go to Tools, and select Grid from the bottom of the list.
> 6) Set the scale by typing 1" into the Measurements box at the bottom
> right. Then press enter to set the scale.
> 7) Click to set the start point, drag to set the length along the x-axis
> then click again. Then drag up to set the y-axis. (Screenshot 2)
> 8) Use the line tool, as normal, to create any flat surfaces.
> 9) Drag and drop the desired profile onto the grid. (Screenshot 3)
> 10) The side edges of the bits are still in place to help identify
> overlapping, but can be erased if desired to clean up the image.
> (Screenshot 4)
>
> That's the quick and dirty version. Let me know if you have any other
> questions.
> By the way, I created the profiles by outlining the profiles that were
> distributed by Tracy at Legacy. Hopefully, distributing my sketchup
> versions doesn't create any issue.
>
> Enjoy!
> Brandon
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at http://groups.google.com/group/legacy-ornamental-mills
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-07-09 Thread CURTIS GEORGE

Brandon 
I too would like to see how you do what you do. 
When you have the time. please let us know. 
C.A.G. 

- Original Message -






Brandon, 


I would be interested in how you use sketchup for profiles. 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group. 
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com . 
To post to this group, send email to legacy-ornamental-mills@googlegroups.com . 
Visit this group at http://groups.google.com/group/legacy-ornamental-mills . 
For more options, visit https://groups.google.com/d/optout . 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-07-09 Thread stormin...@snet.net



> Brandon,
>
I would be interested in how you use sketchup for profiles. 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-07-08 Thread Bill Bulkeley

if possible could you also do some profiles of the combination bits that 
would be great i have been wanting them for quite some time

Bill


- Original Message - 
From: "Brandon Khoury" 

To: 
Sent: Wednesday, July 09, 2014 6:02 AM
Subject: Re: legacy design kit


I have developed a method for designing spindles using sketchup.  Give me 
some time and I'll do a write up and see if I can attach the bit profiles I 
created.  I made them using the profiles from Tracy. There are a couple 
plug-ins needed as well.


Again,  give me some time to get this done.  I am extraordinarily busy at 
work at I'm doing a lot of traveling currently. Hopefully,  I can get his 
done in the next week or so.


Brandon

--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com.
Visit this group at 
http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout. 


--
You received this message because you are subscribed to the Google Groups "Legacy 
Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-07-08 Thread Brandon Khoury

I have developed a method for designing spindles using sketchup.  Give me some 
time and I'll do a write up and see if I can attach the bit profiles I created. 
 I made them using the profiles from Tracy. There are a couple plug-ins needed 
as well.  

Again,  give me some time to get this done.  I am extraordinarily busy at work 
at I'm doing a lot of traveling currently. Hopefully,  I can get his done in 
the next week or so. 

Brandon

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-06-12 Thread Bill Bulkeley

I have the profiles if you want to make your own with a scroll saw
Bill
  - Original Message - 
  From: mwfos...@earthlink.net 
  To: legacy-ornamental-mills@googlegroups.com 
  Sent: Friday, June 13, 2014 12:51 AM
  Subject: RE: legacy design kit


  Max,
  No, I have been searching for one for well over a year.  Still no luck.
  Why, do you have one you are no longer using and are willing to part with?
  Thanks.
  Mac

--

--

-Original Message- 
From: MAX LATHAM 
Sent: Jun 12, 2014 9:56 AM 
To: "legacy-ornamental-mills@googlegroups.com" 
Subject: RE: legacy design kit 


Did you ever get a set?
max latham





From: bulke...@mmnet.com.au
To: legacy-ornamental-mills@googlegroups.com
    Subject: legacy design kit
Date: Mon, 12 May 2014 14:35:53 +1000


Has anybody out there got the sheets with all the router bit shapes and 
numbers of the bits on it that comes with the legacy design kit .my kit I got 
second hand doesn’t have this sheet and I would like to get one again 

Not the plastic sheets the paper ones 

If so could someone scan it and either post it here or email it to me

I started to design some stair balustrades  and found out I didn’t have it

I have to keep going to the router cupboard to check if I have the bits I’m 
tracing and the number on them it’s a pain  

Bill





This email is free from viruses and malware because avast! 
Antivirus protection is active. 
 


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.


  -- 
  You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
  To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
  To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
  Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
  For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-06-12 Thread Bill Bulkeley

yes i did get the sheets but i didnt get any one to draw up the combination bit 
profiles so i can make templeats for them I dont have a drawing program to do it
perhaps some one on the group that has a drawing program migh post some for me 
one day hint hint hint 
Bill
  - Original Message - 
  From: MAX LATHAM 
  To: legacy-ornamental-mills@googlegroups.com 
  Sent: Thursday, June 12, 2014 11:56 PM
  Subject: RE: legacy design kit


  Did you ever get a set?
  max latham




--
  From: bulke...@mmnet.com.au
  To: legacy-ornamental-mills@googlegroups.com
  Subject: legacy design kit
  Date: Mon, 12 May 2014 14:35:53 +1000


  Has anybody out there got the sheets with all the router bit shapes and 
numbers of the bits on it that comes with the legacy design kit .my kit I got 
second hand doesn't have this sheet and I would like to get one again 

  Not the plastic sheets the paper ones 

  If so could someone scan it and either post it here or email it to me

  I started to design some stair balustrades  and found out I didn't have it

  I have to keep going to the router cupboard to check if I have the bits I'm 
tracing and the number on them it's a pain  

  Bill




--
  This email is free from viruses and malware because avast! Antivirus 
protection is active. 
   


  -- 
  You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
  To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
  To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
  Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
  For more options, visit https://groups.google.com/d/optout.


  -- 
  You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
  To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
  To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
  Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
  For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-06-12 Thread 'joe biunno' via Legacy Ornamental Mills

if anyone is up for a trade of some sort, here is what i have...a pad of 
paper that has a 1" grid pattern laid out on it, with the legacy trademark 
on it...the pad measures 13" x 40" overall...approx. 30 pages...also a pad 
that has a circular graph on it that you would use with your rotary table, 
also with the legacy info on it...this pad is full and about 40 
pages...three thick plastic sheets with template cut outs that i would 
assume would correspond to various router bit profiles...they still have 
the protective plastic on each side of the piece so my guess is that they 
were never used...and all of this is still in the original box as shipped 
by legacy...i'd be interested in trading for some legacy 
items...railing?...let me know...thanks...joe...e-mail   

On Thursday, June 12, 2014 3:06:12 PM UTC-4, Milt wrote:
>
> I just found mine.  Will PDF and post by the weekend. 
>
> Sent from my Iphone 5
>
> On Jun 12, 2014, at 7:51 AM, > wrote:
>
> Max,
> No, I have been searching for one for well over a year.  Still no luck.
> Why, do you have one you are no longer using and are willing to part with?
> Thanks.
> Mac
> --
> --
>
> -Original Message- 
> From: MAX LATHAM 
> Sent: Jun 12, 2014 9:56 AM 
> To: "legacy-orna...@googlegroups.com " 
> Subject: RE: legacy design kit 
>
> Did you ever get a set?
> max latham
>
>
> ----------
> From: bulk...@mmnet.com.au 
> To: legacy-orna...@googlegroups.com 
> Subject: legacy design kit
> Date: Mon, 12 May 2014 14:35:53 +1000
>
> Has anybody out there got the sheets with all the router bit shapes and 
> numbers of the bits on it that comes with the legacy design kit .my kit I 
> got second hand doesn’t have this sheet and I would like to get one again 
>
> Not the plastic sheets the paper ones 
>
> If so could someone scan it and either post it here or email it to me
>
> I started to design some stair balustrades  and found out I didn’t have it
>
> I have to keep going to the router cupboard to check if I have the bits 
> I’m tracing and the number on them it’s a pain  
>
> Bill
>
>
> --
><http://www.avast.com/>  
>
> This email is free from viruses and malware because avast! Antivirus 
> <http://www.avast.com/> protection is active. 
>   
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To post to this group, send email to legacy-orna...@googlegroups.com 
> .
> Visit this group at http://groups.google.com/group/legacy-ornamental-mills
> .
> For more options, visit https://groups.google.com/d/optout.
>  
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To post to this group, send email to legacy-orna...@googlegroups.com 
> .
> Visit this group at http://groups.google.com/group/legacy-ornamental-mills
> .
> For more options, visit https://groups.google.com/d/optout.
>
>  -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To post to this group, send email to legacy-orna...@googlegroups.com 
> .
> Visit this group at http://groups.google.com/group/legacy-ornamental-mills
> .
> For more options, visit https://groups.google.com/d/optout.
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-06-12 Thread Milt on Gmail

I just found mine.  Will PDF and post by the weekend. 

Sent from my Iphone 5

> On Jun 12, 2014, at 7:51 AM,  wrote:
> 
> Max,
> No, I have been searching for one for well over a year.  Still no luck.
> Why, do you have one you are no longer using and are willing to part with?
> Thanks.
> Mac
> -Original Message- 
> From: MAX LATHAM 
> Sent: Jun 12, 2014 9:56 AM 
> To: "legacy-ornamental-mills@googlegroups.com" 
> Subject: RE: legacy design kit 
> 
> Did you ever get a set?
> max latham
> 
> 
> From: bulke...@mmnet.com.au
> To: legacy-ornamental-mills@googlegroups.com
> Subject: legacy design kit
> Date: Mon, 12 May 2014 14:35:53 +1000
> 
> Has anybody out there got the sheets with all the router bit shapes and 
> numbers of the bits on it that comes with the legacy design kit .my kit I got 
> second hand doesn’t have this sheet and I would like to get one again
> Not the plastic sheets the paper ones
> If so could someone scan it and either post it here or email it to me
> I started to design some stair balustrades  and found out I didn’t have it
> I have to keep going to the router cupboard to check if I have the bits I’m 
> tracing and the number on them it’s a pain  
> Bill
> 
> 
>   
> This email is free from viruses and malware because avast! Antivirus 
> protection is active.
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: legacy design kit

2014-06-12 Thread mwfoscue

Max,No, I have been searching for one for well over a year.  Still no luck.Why, do you have one you are no longer using and are willing to part with?Thanks.Mac-Original Message-
From: MAX LATHAM 
Sent: Jun 12, 2014 9:56 AM
To: "legacy-ornamental-mills@googlegroups.com" 
Subject: RE: legacy design kit




Did you ever get a set?max lathamFrom: bulke...@mmnet.com.auTo: legacy-ornamental-mills@googlegroups.comSubject: legacy design kitDate: Mon, 12 May 2014 14:35:53 +1000Has anybody out there got the sheets with all the router bit shapes and numbers of the bits on it that comes with the legacy design kit .my kit I got second hand doesn’t have this sheet and I would like to get one again Not the plastic sheets the paper ones If so could someone scan it and either post it here or email it to meI started to design some stair balustrades  and found out I didn’t have itI have to keep going to the router cupboard to check if I have the bits I’m tracing and the number on them it’s a pain  Bill



	
		
			

			
		
		
			
This email is free from viruses and malware because avast! Antivirus protection is active.
			
		
	






-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout. 		 	   		  




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: legacy design kit

2014-06-12 Thread MAX LATHAM

Did you ever get a set?max latham

From: bulke...@mmnet.com.au
To: legacy-ornamental-mills@googlegroups.com
Subject: legacy design kit
Date: Mon, 12 May 2014 14:35:53 +1000

Has anybody out there got the sheets with all the router bit shapes and numbers 
of the bits on it that comes with the legacy design kit .my kit I got second 
hand doesn't have this sheet and I would like to get one again Not the plastic 
sheets the paper ones If so could someone scan it and either post it here or 
email it to meI started to design some stair balustrades  and found out I 
didn't have itI have to keep going to the router cupboard to check if I have 
the bits I'm tracing and the number on them it's a pain  Bill

This email is free from viruses and malware 
because avast! Antivirus protection is active.

-- 

You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.

To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.

To post to this group, send email to legacy-ornamental-mills@googlegroups.com.

Visit this group at http://groups.google.com/group/legacy-ornamental-mills.

For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-05-17 Thread mwfoscue

Tim,No file included or attached - please re-send.  Thanks.Mac===-Original Message-
From: "regal...@juno.com" 
Sent: May 16, 2014 10:42 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy design kit

A long time ago I made this file that covers what is in the design kit.  It is for the groups benefit.  I'd assume not what Bill is looking for but interesting. -Tim  - Original Message -   From: mwfos...@earthlink.net   To: legacy-ornamental-mills@googlegroups.com   Sent: Monday, May 12, 2014 1:34 PM  Subject: Re: legacy design kitMike,Yes, I am interested in getting a set of the Magnate Legacy Ornamental Mill router bit templates.I'm not in a hurry - so give The Group a  bit of time to reply back to you on this.  I assume you have a set of the "Originals"?  I have a couple sheets of the rectangular grid - unfortunately, none of the round sheets.  I was thinking I could probably take one of my sheets to a "printing shop" and have then produce a couple "tablets" of the graph paper. (Or better yet a Community College where they teach printing - could be a "project" for a student.  That way it would cost less.)Do you have an Epilogue laser cutter?  Thanks for the offer.Mac--Original Message- From: mike Sent: May 12, 2014 3:01 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: legacy design kit I attached the router bit profile dxf file, I can make the templates out of 1/8in plexiglass if anybody is interested let me know.On Sunday, May 11, 2014 11:35:53 PM UTC-5, aussiman wrote:>> Has anybody out there got the sheets with all the router bit shapes and     > numbers of the bits on it that comes with the legacy design kit .my kit I > got second hand doesn’t have this sheet and I would like to get one again >> Not the plastic sheets the paper ones >> If so could someone scan it and either post it here or email it to me>> I started to design some stair balustrades and found out I didn’t have it>> I have to keep going to the router cupboard to check if I have the bits > I’m tracing and the number on them it’s a pain >> Bill

-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-05-16 Thread regal...@juno.com

A long time ago I made this file that covers what is in the design kit.  It is 
for the groups benefit.  I'd assume not what Bill is looking for but 
interesting. 

-Tim

  - Original Message - 
  From: mwfos...@earthlink.net 
  To: legacy-ornamental-mills@googlegroups.com 
  Sent: Monday, May 12, 2014 1:34 PM
  Subject: Re: legacy design kit

Mike,
Yes, I am interested in getting a set of the Magnate Legacy Ornamental Mill 
router bit templates.
I'm not in a hurry - so give The Group a  bit of time to reply back to you 
on this.  I assume you have a set of the "Originals"?  I have a couple sheets 
of the rectangular grid - unfortunately, none of the round sheets.  I was 
thinking I could probably take one of my sheets to a "printing shop" and have 
then produce a couple "tablets" of the graph paper. (Or better yet a Community 
College where they teach printing - could be a "project" for a student.  That 
way it would cost less.)
Do you have an Epilogue laser cutter?  
Thanks for the offer.
Mac

-
-Original Message- 
From: mike 
Sent: May 12, 2014 3:01 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: legacy design kit 

I attached the router bit profile dxf file, I can make the templates out of 
1/8in plexiglass if anybody is interested let me know.

On Sunday, May 11, 2014 11:35:53 PM UTC-5, aussiman wrote:
>
> Has anybody out there got the sheets with all the router bit shapes and 
    > numbers of the bits on it that comes with the legacy design kit .my kit I 
> got second hand doesn’t have this sheet and I would like to get one again 
>
> Not the plastic sheets the paper ones 
>
> If so could someone scan it and either post it here or email it to me
>
> I started to design some stair balustrades and found out I didn’t have it
>
> I have to keep going to the router cupboard to check if I have the bits 
> I’m tracing and the number on them it’s a pain 
>
> Bill

  -- 
  You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
  To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
  To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
  Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
  For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: legacy design kit

While we’re talking design kit if someone can make a profile i can print of all 
the combination rope and barley bits  both separate and when they are combined 
i would like that please so i can make my own template for them legacy never 
did do those ones .

With what tim has posted for me any one with time and a scroll saw could make 
their own templates

Bill

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of 
mwfos...@earthlink.net
Sent: Tuesday, 13 May 2014 6:35 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy design kit

Mike,

Yes, I am interested in getting a set of the Magnate Legacy Ornamental Mill 
router bit templates.

I'm not in a hurry - so give The Group a  bit of time to reply back to you on 
this.  I assume you have a set of the "Originals"?  I have a couple sheets of 
the rectangular grid - unfortunately, none of the round sheets.  I was thinking 
I could probably take one of my sheets to a "printing shop" and have then 
produce a couple "tablets" of the graph paper. (Or better yet a Community 
College where they teach printing - could be a "project" for a student.  That 
way it would cost less.)

Do you have an Epilogue laser cutter?  

Thanks for the offer.

Mac

-

-Original Message- 
From: mike 
Sent: May 12, 2014 3:01 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: legacy design kit 

I attached the router bit profile dxf file, I can make the templates out of 
1/8in plexiglass if anybody is interested let me know.

On Sunday, May 11, 2014 11:35:53 PM UTC-5, aussiman wrote:
>
> Has anybody out there got the sheets with all the router bit shapes and 
> numbers of the bits on it that comes with the legacy design kit .my kit I 
> got second hand doesn’t have this sheet and I would like to get one again 
>
> Not the plastic sheets the paper ones 
>
> If so could someone scan it and either post it here or email it to me
>
> I started to design some stair balustrades and found out I didn’t have it
>
> I have to keep going to the router cupboard to check if I have the bits 
> I’m tracing and the number on them it’s a pain 
>
> Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

---
This email is free from viruses and malware because avast! Antivirus protection 
is active.
http://www.avast.com

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-05-12 Thread Tim Krause

Hi All,

I was just going to draft a rotary table graph that will fit on a 8-1/2" x 11 
sheet of paper in Legacy's style.  Any one interested?  If I recall, there was 
nothing unique or interesting about the full size table leg designing paper.  
Any graph paper would work.

-Tim

  - Original Message - 
  From: Bill Bulkeley 
  To: legacy-ornamental-mills@googlegroups.com 
  Sent: Monday, May 12, 2014 3:21 PM
  Subject: RE: legacy design kit


  There are programs on line too that you can use to print just about any graph 
paper you need

  Bill

   

  From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of 
mwfos...@earthlink.net
  Sent: Tuesday, 13 May 2014 6:35 AM
  To: legacy-ornamental-mills@googlegroups.com
  Subject: Re: legacy design kit

   

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-05-12 Thread Tim Krause

Bill's good to go then. 

-Tim

  - Original Message - 
  From: Bill Bulkeley 
  To: legacy-ornamental-mills@googlegroups.com 
  Sent: Monday, May 12, 2014 3:16 PM
  Subject: RE: legacy design kit


  No Tim just the reference pages with the bit profiles and numbers on it i 
already own all the rest

  Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: legacy design kit

There are programs on line too that you can use to print just about any graph 
paper you need

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of 
mwfos...@earthlink.net
Sent: Tuesday, 13 May 2014 6:35 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy design kit

 

Mike,

Yes, I am interested in getting a set of the Magnate Legacy Ornamental Mill 
router bit templates.

I'm not in a hurry - so give The Group a  bit of time to reply back to you on 
this.  I assume you have a set of the "Originals"?  I have a couple sheets of 
the rectangular grid - unfortunately, none of the round sheets.  I was thinking 
I could probably take one of my sheets to a "printing shop" and have then 
produce a couple "tablets" of the graph paper. (Or better yet a Community 
College where they teach printing - could be a "project" for a student.  That 
way it would cost less.)

Do you have an Epilogue laser cutter?  

Thanks for the offer.

Mac

-

-Original Message- 
From: mike 
Sent: May 12, 2014 3:01 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: legacy design kit 

I attached the router bit profile dxf file, I can make the templates out of 
1/8in plexiglass if anybody is interested let me know.

On Sunday, May 11, 2014 11:35:53 PM UTC-5, aussiman wrote:
>
> Has anybody out there got the sheets with all the router bit shapes and 
> numbers of the bits on it that comes with the legacy design kit .my kit I 
> got second hand doesn’t have this sheet and I would like to get one again 
>
> Not the plastic sheets the paper ones 
>
> If so could someone scan it and either post it here or email it to me
>
> I started to design some stair balustrades and found out I didn’t have it
>
> I have to keep going to the router cupboard to check if I have the bits 
> I’m tracing and the number on them it’s a pain 
>
> Bill



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.



---
This email is free from viruses and malware because avast! Antivirus protection 
is active.
http://www.avast.com

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: legacy design kit

No Tim just the reference pages with the bit profiles and numbers on it i 
already own all the rest

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim
Sent: Tuesday, 13 May 2014 6:09 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy design kit

 

HI Mike,

I had to delete your post.  I agreed with Tracy Anderson that I would not allow 
sharing this file in the group.  Tracy said he would send the file to anyone 
that contacted him at Legacy.  As to your offer to make the templates, I don't 
think that is out of line since the product is no longer available through 
Legacy as far as I'm aware of.  Someone might check on that. 

Bill, are you looking for the graph paper that was included, or the 
instructions?  For others, there is a great video under the Legacy Academy 
label on how the design kit can be used..

-Tim


On Monday, May 12, 2014 12:01:26 PM UTC-7, mike wrote:

I attached the router bit profile dxf file, I can make the templates out of 
1/8in plexiglass if anybody is interested let me know.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.



---
This email is free from viruses and malware because avast! Antivirus protection 
is active.
http://www.avast.com

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-05-12 Thread mwfoscue

Mike,Yes, I am interested in getting a set of the Magnate Legacy Ornamental Mill router bit templates.I'm not in a hurry - so give The Group a  bit of time to reply back to you on this.  I assume you have a set of the "Originals"?  I have a couple sheets of the rectangular grid - unfortunately, none of the round sheets.  I was thinking I could probably take one of my sheets to a "printing shop" and have then produce a couple "tablets" of the graph paper. (Or better yet a Community College where they teach printing - could be a "project" for a student.  That way it would cost less.)Do you have an Epilogue laser cutter?  Thanks for the offer.Mac--Original Message-
From: mike 
Sent: May 12, 2014 3:01 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy design kit

I attached the router bit profile dxf file, I can make the templates out of 1/8in plexiglass if anybody is interested let me know.On Sunday, May 11, 2014 11:35:53 PM UTC-5, aussiman wrote:>> Has anybody out there got the sheets with all the router bit shapes and > numbers of the bits on it that comes with the legacy design kit .my kit I > got second hand doesn’t have this sheet and I would like to get one again >> Not the plastic sheets the paper ones >> If so could someone scan it and either post it here or email it to me>> I started to design some stair balustrades  and found out I didn’t have it>> I have to keep going to the router cupboard to check if I have the bits > I’m tracing and the number on them it’s a pain  >> Bill

-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-05-12 Thread Tim

HI Mike,

I had to delete your post.  I agreed with Tracy Anderson that I would not 
allow sharing this file in the group.  Tracy said he would send the file to 
anyone that contacted him at Legacy.  As to your offer to make the 
templates, I don't think that is out of line since the product is no longer 
available through Legacy as far as I'm aware of.  Someone might check on 
that. 

Bill, are you looking for the graph paper that was included, or the 
instructions?  For others, there is a great video under the Legacy Academy 
label on how the design kit can be used..

-Tim

On Monday, May 12, 2014 12:01:26 PM UTC-7, mike wrote:
>
> I attached the router bit profile dxf file, I can make the templates out 
> of 1/8in plexiglass if anybody is interested let me know.
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: legacy design kit

Thanks curt

Bill

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Monday, 12 May 2014 5:54 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy design kit

Hello and Good morning.

I own the design kit, I will see if I can scan those pages for you Bill.

I too was not aware of the model number change, You know the last time I 
ordered some bits, Magnate sent my an CD of there catalog Ive not looked at it, 
Perhaps there is something on it that could explain the changes and ...? I will 
see if I can find it?

I need to get to work now. 

talk to you and all latter.

C.A.G.

  _  

Bill,

Glad you brought up the subject of the Legacy Design Kit.  I'd love to get my 
hands on one.  If that is not possible, perhaps someone in The Group has the 
ability (or knows someone who does) to reproduce the Lexan/plastic (?) bit 
templates like what came in the no-longer-produced kit.  If we have enough 
Group Members interested is getting the plastic templates - their production 
may be economically feasible.

I do know that you used to be able to get the CAD shapes/sizes from Legacy (and 
perhaps Tim?). Perhaps you can then print them out to do what you are wanting 
to do.

You bring up a "beef" I have with the Magnate router bits:  On the few Magnate 
router bits I have, the plastic container/box they came in has a label with 
most of the bit's info on it.  HOWEVER! - the router bits only have "Magnate" 
etched on the shank - NO bit model number!  I HATE that!  Why don't they etch 
the bit's stock/model number on the shank?

A related "beef":  Magnate has changed the Model numbers of a number of their 
bits.  I don't know why - nor have I seen a cross-reference table, where you 
can look up a bit you have and the table tells you its "equivalent" bit: "old 
to new" or new to old".  

Does anyone have such a cross-reference table/list they can scan and post here? 

Can anyone explain why Magnate changed their model numbers?  

All info anyone can share with The Group regarding Magnate's Legacy Ornamental 
Mill bits will be greatly appreciated.

Thanks.

Mac

--

-Original Message- 
From: Bill Bulkeley 
Sent: May 12, 2014 12:35 AM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: legacy design kit 

Has anybody out there got the sheets with all the router bit shapes and
numbers of the bits on it that comes with the legacy design kit .my kit I
got second hand doesn't have this sheet and I would like to get one again 

Not the plastic sheets the paper ones 

If so could someone scan it and either post it here or email it to me

I started to design some stair balustrades and found out I didn't have it

I have to keep going to the router cupboard to check if I have the bits I'm
tracing and the number on them it's a pain 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

---
This email is free from viruses and malware because avast! Antivirus protection 
is active.
http://www.avast.com

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

2014-05-12 Thread CURTIS GEORGE

Hello and Good morning. 
I own the design kit, I will see if I can scan those pages for you Bill. 
I too was not aware of the model number change, You know the last time I 
ordered some bits, Magnate sent my an CD of there catalog Ive not looked at it, 
Perhaps there is something on it that could explain the changes and ...? I will 
see if I can find it? 
I need to get to work now. 
talk to you and all latter. 
C.A.G. 

- Original Message -


Bill, 



Glad you brought up the subject of the Legacy Design Kit. I'd love to get my 
hands on one. If that is not possible, perhaps someone in The Group has the 
ability (or knows someone who does) to reproduce the Lexan/plastic (?) bit 
templates like what came in the no-longer-produced kit. If we have enough Group 
Members interested is getting the plastic templates - their production may be 
economically feasible. 



I do know that you used to be able to get the CAD shapes/sizes from Legacy (and 
perhaps Tim?). Perhaps you can then print them out to do what you are wanting 
to do. 



You bring up a "beef" I have with the Magnate router bits: On the few Magnate 
router bits I have, the plastic container/box they came in has a label with 
most of the bit's info on it. HOWEVER! - the router bits only have "Magnate" 
etched on the shank - NO bit model number! I HATE that! Why don't they etch the 
bit's stock/model number on the shank? 



A related "beef": Magnate has changed the Model numbers of a number of their 
bits. I don't know why - nor have I seen a cross-reference table, where you can 
look up a bit you have and the table tells you its "equivalent" bit: "old to 
new" or new to old". 



Does anyone have such a cross-reference table/list they can scan and post here? 



Can anyone explain why Magnate changed their model numbers? 



All info anyone can share with The Group regarding Magnate's Legacy Ornamental 
Mill bits will be greatly appreciated. 



Thanks. 



Mac 



--
 



-Original Message- 
From: Bill Bulkeley 
Sent: May 12, 2014 12:35 AM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: legacy design kit 

Has anybody out there got the sheets with all the router bit shapes and 
numbers of the bits on it that comes with the legacy design kit .my kit I 
got second hand doesn't have this sheet and I would like to get one again 

Not the plastic sheets the paper ones 

If so could someone scan it and either post it here or email it to me 

I started to design some stair balustrades and found out I didn't have it 

I have to keep going to the router cupboard to check if I have the bits I'm 
tracing and the number on them it's a pain 

Bill 




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group. 
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com . 
To post to this group, send email to legacy-ornamental-mills@googlegroups.com . 
Visit this group at http://groups.google.com/group/legacy-ornamental-mills . 
For more options, visit https://groups.google.com/d/optout . 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: legacy design kit