Re: New Year ahead!
Yeah good luck and lets get this mystery solved and productive. I am looking forward to it. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Jan 1, 2024 at 10:00 AM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Good morning Dan. > > Yes this is what I am working for. > the Legacy is the fixed point, the jig/table will be adjustable so I can > very different size of the ovals ark/shape, the size of the oval will be > dependent to the router bit/Legacy. > The linkage could be a slot or a bar, pushing or pulling the top as it > rotates around the sun gear, making the oval. > Now the template, I need to think on that one. I know that indexing an > Oval/ even spacing on an oval. needs a > special indexing plate, Perhaps a template could surface??? But that's a > long way from where I am at, At this time. But a very nice idea! > > NOW "Not" trying to change the subject. What you suggest about the > Spirograph type of designs, Are made by the way of a Geometric chuck, That > too. I have been working on for a while. (and I am very close to finishing > that project as well. but that is a different topic all together. ) > > Have a GREAT Day, and a Happy New Year. > As for me, I'm going out to the shop now and see if I can dig up some > parts to make this linkage for the table. > > talk to you, (and all) more latter. > > C.A.G. > > On Monday, January 1, 2024 at 10:22:57 AM EST, cdkr...@gmail.com < > cdkra...@gmail.com> wrote: > > > Given the pictures you posted, I'm not sure that gears are necessary at > all. If the center gear were simply a plate with a slotted arm (for > adjustability) secured to it (in a groove?) and if the arm had a pin in the > end to engage a hole in the plate sitting on the drawer slides, it would > move the plate back and forth as the table holding the plate (on its > slides) turned. A fixed point above the plate (the router) would trace an > oval whose axes differ by how far the pin is from center. Look up > "Archimedes compass". > > I mentioned an idea that popped into my head. It is based upon a template > follower that moves the router frame back and forth on the X axis as the > rotary table rotates the template under a workpiece. This opens up the > possibility of just about any shape the follower can follow. Different > sizes could be generated using the same template by adjusting the arm > holding the follower, just like using the template (and follower) moves the > router frame on the Y axis. An oval template would produce any size oval > workpiece of the same height to length ratio within the range of the table > clearance. And it occurs to me that it's a dumb idea because one can do > that same thing with a template following router bit not even needing the > mill! Doh! > > So, Curt is on a good path. I'm wondering if by using the planetary gear > system one could produce patterns like the famous sketching toy did. It was > known as Spirograph and operated on a principle very close to what Curt is > trying to do. Producing different patterns might extend to producing gears > that are not round. All kinds of possibilitiesbut one step at a time. > > > DanK > Ooooh look. A shiny object! ,, > On Monday, January 1, 2024 at 9:44:28 AM UTC-5 Curt George wrote: > > Good morning Tim. (Happy New Year to everyone!) > > The slides will move back and forth, the movement will be more to one side > then the other, but the answers is Yes, there will be some movement in both > directions. > I am hoping that the drawer slides will work for me? The basic design that > I am basing my jig on, used dovetails for its movement. > This is all trial and error time for me. I feel pretty sure that its > going to work, but...? We will have to wait and see. > Wish me luck. ;-) > > More latter. > C.A.G. > > On Monday, January 1, 2024 at 07:17:26 AM EST, Tim Ziegler < > timjz...@gmail.com> wrote: > > > Going to be interesting for sure. I'm looking forward to your progress on > this one too. > Does it need slides going both directions though? > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Sun, Dec 31, 2023 at 9:58 PM 'Curt George' via Legacy Ornamental Mills < > legacy-orna...@googlegroups.com> wrote: > > Hello Dan. > > Lets not put the cart before the horse (so to speak.) At this
Re: New Year ahead!
wow thanks for all the knowledge there Sir. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Jan 1, 2024 at 9:46 AM cdkr...@gmail.com wrote: > The XY movement of the work piece Tim is concerned about is accomplished > through the single direction movement of the slides as it rotates through > the axial directions. Picture a pencil tracing an oval centered on an XY > origin. The X and Y coordinates of the pencil change continuously as the > pencil traces the arc of the fixed oval. Curt's plan will move the oval > (work piece) under a fixed pencil (the router) in the same fashion. One has > to consider the effect of the rotary motion upon the X and Y coordinates. > The Trammel of Archimedes does not need gears. > > But pursuing the gear option might open other more complex design > possibilities. For example, if the two gears Curt shows are different tooth > counts, the path of the oval will advance slightly with each turn of the > table creating the Spirograph traces which will eventually repeat. The > repetition is predictable by the modularity of the difference in tooth > count relative to the larger gear. > DanK > > On Monday, January 1, 2024 at 10:22:54 AM UTC-5 cdkr...@gmail.com wrote: > >> Given the pictures you posted, I'm not sure that gears are necessary at >> all. If the center gear were simply a plate with a slotted arm (for >> adjustability) secured to it (in a groove?) and if the arm had a pin in the >> end to engage a hole in the plate sitting on the drawer slides, it would >> move the plate back and forth as the table holding the plate (on its >> slides) turned. A fixed point above the plate (the router) would trace an >> oval whose axes differ by how far the pin is from center. Look up >> "Archimedes compass". >> >> I mentioned an idea that popped into my head. It is based upon a >> template follower that moves the router frame back and forth on the X axis >> as the rotary table rotates the template under a workpiece. This opens up >> the possibility of just about any shape the follower can follow. Different >> sizes could be generated using the same template by adjusting the arm >> holding the follower, just like using the template (and follower) moves the >> router frame on the Y axis. An oval template would produce any size oval >> workpiece of the same height to length ratio within the range of the table >> clearance. And it occurs to me that it's a dumb idea because one can do >> that same thing with a template following router bit not even needing the >> mill! Doh! >> >> So, Curt is on a good path. I'm wondering if by using the planetary gear >> system one could produce patterns like the famous sketching toy did. It was >> known as Spirograph and operated on a principle very close to what Curt is >> trying to do. Producing different patterns might extend to producing gears >> that are not round. All kinds of possibilitiesbut one step at a time. >> >> >> DanK >> Ooooh look. A shiny object! ,, >> On Monday, January 1, 2024 at 9:44:28 AM UTC-5 Curt George wrote: >> >>> Good morning Tim. (Happy New Year to everyone!) >>> >>> The slides will move back and forth, the movement will be more to one >>> side then the other, but the answers is Yes, there will be some movement in >>> both directions. >>> I am hoping that the drawer slides will work for me? The basic design >>> that I am basing my jig on, used dovetails for its movement. >>> This is all trial and error time for me. I feel pretty sure that its >>> going to work, but...? We will have to wait and see. >>> Wish me luck. ;-) >>> >>> More latter. >>> C.A.G. >>> >>> On Monday, January 1, 2024 at 07:17:26 AM EST, Tim Ziegler < >>> timjz...@gmail.com> wrote: >>> >>> >>> Going to be interesting for sure. I'm looking forward to your progress >>> on this one too. >>> Does it need slides going both directions though? >>> >>> Kind Regards, >>> >>> Timothy J. Ziegler >>> Ziegler WoodWork & Specialty >>> Ziegler Laser Worx LLC >>> 14171 160th Ave. >>> Foreston MN 56330 >>> >>> 320-294-5798 <(320)%20294-5798> shop >>> 320-630-2243 <(320)%20630-2243> cell >>> >>> >>> On Sun, Dec 31, 2023 at 9:58 PM 'Curt George' via Legacy Ornamental >>> Mills wrote: >>> >>&g
Re: New Year ahead!
Yeah all as clear as mud here lol. I have an oval maker I will have to study that a bit which runs on the dovetails Curt mentioned. this could get super exciting for sure. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Jan 1, 2024 at 9:22 AM cdkr...@gmail.com wrote: > Given the pictures you posted, I'm not sure that gears are necessary at > all. If the center gear were simply a plate with a slotted arm (for > adjustability) secured to it (in a groove?) and if the arm had a pin in the > end to engage a hole in the plate sitting on the drawer slides, it would > move the plate back and forth as the table holding the plate (on its > slides) turned. A fixed point above the plate (the router) would trace an > oval whose axes differ by how far the pin is from center. Look up > "Archimedes compass". > > I mentioned an idea that popped into my head. It is based upon a template > follower that moves the router frame back and forth on the X axis as the > rotary table rotates the template under a workpiece. This opens up the > possibility of just about any shape the follower can follow. Different > sizes could be generated using the same template by adjusting the arm > holding the follower, just like using the template (and follower) moves the > router frame on the Y axis. An oval template would produce any size oval > workpiece of the same height to length ratio within the range of the table > clearance. And it occurs to me that it's a dumb idea because one can do > that same thing with a template following router bit not even needing the > mill! Doh! > > So, Curt is on a good path. I'm wondering if by using the planetary gear > system one could produce patterns like the famous sketching toy did. It was > known as Spirograph and operated on a principle very close to what Curt is > trying to do. Producing different patterns might extend to producing gears > that are not round. All kinds of possibilitiesbut one step at a time. > > > DanK > Ooooh look. A shiny object! ,, > On Monday, January 1, 2024 at 9:44:28 AM UTC-5 Curt George wrote: > >> Good morning Tim. (Happy New Year to everyone!) >> >> The slides will move back and forth, the movement will be more to one >> side then the other, but the answers is Yes, there will be some movement in >> both directions. >> I am hoping that the drawer slides will work for me? The basic design >> that I am basing my jig on, used dovetails for its movement. >> This is all trial and error time for me. I feel pretty sure that its >> going to work, but...? We will have to wait and see. >> Wish me luck. ;-) >> >> More latter. >> C.A.G. >> >> On Monday, January 1, 2024 at 07:17:26 AM EST, Tim Ziegler < >> timjz...@gmail.com> wrote: >> >> >> Going to be interesting for sure. I'm looking forward to your progress on >> this one too. >> Does it need slides going both directions though? >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> Ziegler Laser Worx LLC >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> >> >> On Sun, Dec 31, 2023 at 9:58 PM 'Curt George' via Legacy Ornamental Mills >> wrote: >> >> Hello Dan. >> >> Lets not put the cart before the horse (so to speak.) At this time ONE >> is all that I am planning to make. >> But having said that, If you or any of the LOM group wants to try to make >> one after me, I would be all to glad to give them any help that I can. >> The ONLY thing that I am running into a problem with at this time, is the >> adjustable linkage for the planet gear. >> I want to make it adjustable, but I'm limited to space and How adjustable >> it needs to be? I could use a cam/lever to make one-three oval sizes, at >> this time. but I am not sure how I want to make it? >> If you or anyone has any ideas, I would be grateful for any advice. >> >> C.A.G.[image: Inline image] >> >> On Sunday, December 31, 2023 at 10:45:51 PM EST, cdkr...@gmail.com < >> cdkr...@gmail.com> wrote: >> >> >> Yes, I know about the "other" materials for peg board. The object of my >> game is to use as much as I can from what's laying around, and that >> includes the paint I rarely use! >> >> Curt, you're on to something there! It seems very workable! And I would >> want mine to be infini
Re: New Year ahead!
Good morning Dan. Yes this is what I am working for.the Legacy is the fixed point, the jig/table will be adjustable so I can very different size of the ovals ark/shape, the size of the oval will be dependent to the router bit/Legacy.The linkage could be a slot or a bar, pushing or pulling the top as it rotates around the sun gear, making the oval.Now the template, I need to think on that one. I know that indexing an Oval/ even spacing on an oval. needs a special indexing plate, Perhaps a template could surface??? But that's a long way from where I am at, At this time. But a very nice idea! NOW "Not" trying to change the subject. What you suggest about the Spirograph type of designs, Are made by the way of a Geometric chuck, That too. I have been working on for a while. (and I am very close to finishing that project as well. but that is a different topic all together. ) Have a GREAT Day, and a Happy New Year.As for me, I'm going out to the shop now and see if I can dig up some parts to make this linkage for the table. talk to you, (and all) more latter. C.A.G. On Monday, January 1, 2024 at 10:22:57 AM EST, cdkr...@gmail.com wrote: Given the pictures you posted, I'm not sure that gears are necessary at all. If the center gear were simply a plate with a slotted arm (for adjustability) secured to it (in a groove?) and if the arm had a pin in the end to engage a hole in the plate sitting on the drawer slides, it would move the plate back and forth as the table holding the plate (on its slides) turned. A fixed point above the plate (the router) would trace an oval whose axes differ by how far the pin is from center. Look up "Archimedes compass". I mentioned an idea that popped into my head. It is based upon a template follower that moves the router frame back and forth on the X axis as the rotary table rotates the template under a workpiece. This opens up the possibility of just about any shape the follower can follow. Different sizes could be generated using the same template by adjusting the arm holding the follower, just like using the template (and follower) moves the router frame on the Y axis. An oval template would produce any size oval workpiece of the same height to length ratio within the range of the table clearance. And it occurs to me that it's a dumb idea because one can do that same thing with a template following router bit not even needing the mill! Doh! So, Curt is on a good path. I'm wondering if by using the planetary gear system one could produce patterns like the famous sketching toy did. It was known as Spirograph and operated on a principle very close to what Curt is trying to do. Producing different patterns might extend to producing gears that are not round. All kinds of possibilitiesbut one step at a time. DanKOoooh look. A shiny object! ,, On Monday, January 1, 2024 at 9:44:28 AM UTC-5 Curt George wrote: Good morning Tim. (Happy New Year to everyone!) The slides will move back and forth, the movement will be more to one side then the other, but the answers is Yes, there will be some movement in both directions.I am hoping that the drawer slides will work for me? The basic design that I am basing my jig on, used dovetails for its movement. This is all trial and error time for me. I feel pretty sure that its going to work, but...? We will have to wait and see. Wish me luck. ;-) More latter.C.A.G. On Monday, January 1, 2024 at 07:17:26 AM EST, Tim Ziegler wrote: Going to be interesting for sure. I'm looking forward to your progress on this one too. Does it need slides going both directions though? Kind Regards, Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Sun, Dec 31, 2023 at 9:58 PM 'Curt George' via Legacy Ornamental Mills wrote: Hello Dan. Lets not put the cart before the horse (so to speak.) At this time ONE is all that I am planning to make.But having said that, If you or any of the LOM group wants to try to make one after me, I would be all to glad to give them any help that I can.The ONLY thing that I am running into a problem with at this time, is the adjustable linkage for the planet gear.I want to make it adjustable, but I'm limited to space and How adjustable it needs to be? I could use a cam/lever to make one-three oval sizes, at this time. but I am not sure how I want to make it? If you or anyone has any ideas, I would be grateful for any advice. C.A.G. On Sunday, December 31, 2023 at 10:45:51 PM EST, cdkr...@gmail.com wrote: Yes, I know about the "other" materials for peg board. The object of my game is to use as much as I can from what's laying around, and that includes the paint I rarely use! Curt, you're on to something there! It seems very workable! And I would wan
Re: New Year ahead!
The XY movement of the work piece Tim is concerned about is accomplished through the single direction movement of the slides as it rotates through the axial directions. Picture a pencil tracing an oval centered on an XY origin. The X and Y coordinates of the pencil change continuously as the pencil traces the arc of the fixed oval. Curt's plan will move the oval (work piece) under a fixed pencil (the router) in the same fashion. One has to consider the effect of the rotary motion upon the X and Y coordinates. The Trammel of Archimedes does not need gears. But pursuing the gear option might open other more complex design possibilities. For example, if the two gears Curt shows are different tooth counts, the path of the oval will advance slightly with each turn of the table creating the Spirograph traces which will eventually repeat. The repetition is predictable by the modularity of the difference in tooth count relative to the larger gear. DanK On Monday, January 1, 2024 at 10:22:54 AM UTC-5 cdkr...@gmail.com wrote: > Given the pictures you posted, I'm not sure that gears are necessary at > all. If the center gear were simply a plate with a slotted arm (for > adjustability) secured to it (in a groove?) and if the arm had a pin in the > end to engage a hole in the plate sitting on the drawer slides, it would > move the plate back and forth as the table holding the plate (on its > slides) turned. A fixed point above the plate (the router) would trace an > oval whose axes differ by how far the pin is from center. Look up > "Archimedes compass". > > I mentioned an idea that popped into my head. It is based upon a template > follower that moves the router frame back and forth on the X axis as the > rotary table rotates the template under a workpiece. This opens up the > possibility of just about any shape the follower can follow. Different > sizes could be generated using the same template by adjusting the arm > holding the follower, just like using the template (and follower) moves the > router frame on the Y axis. An oval template would produce any size oval > workpiece of the same height to length ratio within the range of the table > clearance. And it occurs to me that it's a dumb idea because one can do > that same thing with a template following router bit not even needing the > mill! Doh! > > So, Curt is on a good path. I'm wondering if by using the planetary gear > system one could produce patterns like the famous sketching toy did. It was > known as Spirograph and operated on a principle very close to what Curt is > trying to do. Producing different patterns might extend to producing gears > that are not round. All kinds of possibilitiesbut one step at a time. > > > DanK > Ooooh look. A shiny object! ,, > On Monday, January 1, 2024 at 9:44:28 AM UTC-5 Curt George wrote: > >> Good morning Tim. (Happy New Year to everyone!) >> >> The slides will move back and forth, the movement will be more to one >> side then the other, but the answers is Yes, there will be some movement in >> both directions. >> I am hoping that the drawer slides will work for me? The basic design >> that I am basing my jig on, used dovetails for its movement. >> This is all trial and error time for me. I feel pretty sure that its >> going to work, but...? We will have to wait and see. >> Wish me luck. ;-) >> >> More latter. >> C.A.G. >> >> On Monday, January 1, 2024 at 07:17:26 AM EST, Tim Ziegler < >> timjz...@gmail.com> wrote: >> >> >> Going to be interesting for sure. I'm looking forward to your progress on >> this one too. >> Does it need slides going both directions though? >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> Ziegler Laser Worx LLC >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> >> >> On Sun, Dec 31, 2023 at 9:58 PM 'Curt George' via Legacy Ornamental Mills >> wrote: >> >> Hello Dan. >> >> Lets not put the cart before the horse (so to speak.) At this time ONE >> is all that I am planning to make. >> But having said that, If you or any of the LOM group wants to try to make >> one after me, I would be all to glad to give them any help that I can. >> The ONLY thing that I am running into a problem with at this time, is the >> adjustable linkage for the planet gear. >> I want to make it adjustable, but I'm limited to space and How adjustable >> it needs to be? I could use a cam/lever to
Re: New Year ahead!
Given the pictures you posted, I'm not sure that gears are necessary at all. If the center gear were simply a plate with a slotted arm (for adjustability) secured to it (in a groove?) and if the arm had a pin in the end to engage a hole in the plate sitting on the drawer slides, it would move the plate back and forth as the table holding the plate (on its slides) turned. A fixed point above the plate (the router) would trace an oval whose axes differ by how far the pin is from center. Look up "Archimedes compass". I mentioned an idea that popped into my head. It is based upon a template follower that moves the router frame back and forth on the X axis as the rotary table rotates the template under a workpiece. This opens up the possibility of just about any shape the follower can follow. Different sizes could be generated using the same template by adjusting the arm holding the follower, just like using the template (and follower) moves the router frame on the Y axis. An oval template would produce any size oval workpiece of the same height to length ratio within the range of the table clearance. And it occurs to me that it's a dumb idea because one can do that same thing with a template following router bit not even needing the mill! Doh! So, Curt is on a good path. I'm wondering if by using the planetary gear system one could produce patterns like the famous sketching toy did. It was known as Spirograph and operated on a principle very close to what Curt is trying to do. Producing different patterns might extend to producing gears that are not round. All kinds of possibilitiesbut one step at a time. DanK Ooooh look. A shiny object! ,, On Monday, January 1, 2024 at 9:44:28 AM UTC-5 Curt George wrote: > Good morning Tim. (Happy New Year to everyone!) > > The slides will move back and forth, the movement will be more to one side > then the other, but the answers is Yes, there will be some movement in both > directions. > I am hoping that the drawer slides will work for me? The basic design that > I am basing my jig on, used dovetails for its movement. > This is all trial and error time for me. I feel pretty sure that its > going to work, but...? We will have to wait and see. > Wish me luck. ;-) > > More latter. > C.A.G. > > On Monday, January 1, 2024 at 07:17:26 AM EST, Tim Ziegler < > timjz...@gmail.com> wrote: > > > Going to be interesting for sure. I'm looking forward to your progress on > this one too. > Does it need slides going both directions though? > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 <(320)%20294-5798> shop > 320-630-2243 <(320)%20630-2243> cell > > > On Sun, Dec 31, 2023 at 9:58 PM 'Curt George' via Legacy Ornamental Mills < > legacy-orna...@googlegroups.com> wrote: > > Hello Dan. > > Lets not put the cart before the horse (so to speak.) At this time ONE is > all that I am planning to make. > But having said that, If you or any of the LOM group wants to try to make > one after me, I would be all to glad to give them any help that I can. > The ONLY thing that I am running into a problem with at this time, is the > adjustable linkage for the planet gear. > I want to make it adjustable, but I'm limited to space and How adjustable > it needs to be? I could use a cam/lever to make one-three oval sizes, at > this time. but I am not sure how I want to make it? > If you or anyone has any ideas, I would be grateful for any advice. > > C.A.G.[image: Inline image] > > On Sunday, December 31, 2023 at 10:45:51 PM EST, cdkr...@gmail.com < > cdkr...@gmail.com> wrote: > > > Yes, I know about the "other" materials for peg board. The object of my > game is to use as much as I can from what's laying around, and that > includes the paint I rarely use! > > Curt, you're on to something there! It seems very workable! And I would > want mine to be infinitely adjustable for the range it can handle. You're > making more than one, right? :) > DanK > > On Sunday, December 31, 2023 at 9:37:46 PM UTC-5 Tim Ziegler wrote: > > yup very interesting stuff for sure. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > On Sun, Dec 31, 2023 at 2:47 PM 'Curt George' via Legacy Ornamental Mills < > legacy-orna...@googlegroups.com> wrote: > > Hello Everyone. > > Thank you Ed. > > This Group was formed to help Legacy users achieve as much
Re: New Year ahead!
Yes, I know about the "other" materials for peg board. The object of my game is to use as much as I can from what's laying around, and that includes the paint I rarely use! Curt, you're on to something there! It seems very workable! And I would want mine to be infinitely adjustable for the range it can handle. You're making more than one, right? :) DanK On Sunday, December 31, 2023 at 9:37:46 PM UTC-5 Tim Ziegler wrote: > yup very interesting stuff for sure. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 <(320)%20294-5798> shop > 320-630-2243 <(320)%20630-2243> cell > > On Sun, Dec 31, 2023 at 2:47 PM 'Curt George' via Legacy Ornamental Mills < > legacy-orna...@googlegroups.com> wrote: > >> Hello Everyone. >> >> Thank you Ed. >> >> This Group was formed to help Legacy users achieve as much as we can, >> by the use of sharing information and ideas. >> >> This Oval jig is just one of the ideas that I want to explore. >> Here are some photo's of what I have up to date. >> >> This is what I have now. >> Please let me explain what is happening here. (NO Video yet.) >> the Rotary table turns with the Legacy headstock. My table has a >> vacuum port in the center, Its not being used at this time, So I have a >> 1/4" rod running threw the vacuum hole at this time. >> The idea here is called a Planetary gear set. >> The center gear is the Sun gear, and the other is a planetary gear. >> it moves around the sun gear, (like the planets do around our sun in this >> solar system.) What is a little confusing here is the table turns by the >> sun gear is >> held in place by the use of the 1/4" rod . >> The planetary gear will have a rod on it to push or pull the table as it >> moves around >> the table. Making the Oval. >> I am using 14" drawer slides to hold the top on this jig. >> I do not have a cam/arm to adjust the ovals size made as yet. but >> everything works >> as designed so far. >> Here is a video that shows what I am looking to do. >> https://www.youtube.com/watch?v=fSiD7lL8P_k >> >> Any and all suggestion or comments are welcome. >> >> C.A.G. >> >> On Sunday, December 31, 2023 at 10:23:42 AM EST, >> wrote: >> >> >> Curt, >> >> You inspire me ! >> >> Thank you ! >> >> >> >> *Ed Trevillian* >> >> edn...@gmail.com >> >> Cell 704-776-5591 <(704)%20776-5591> >> >> >> >> >> >> *From:* legacy-orna...@googlegroups.com >> *On Behalf Of *cdkr...@gmail.com >> *Sent:* Sunday, December 31, 2023 9:42 AM >> *To:* Legacy Ornamental Mills >> *Subject:* Re: New Year ahead! >> >> >> >> This is an idea I've had for several years but have never taken the time >> to engineer the Archimedes compass mechanism. I had a wooden "Bridgeport" >> router mill that it was to be it's first implementation, but I gave up that >> home built machine in the move to IN. Now it will be interesting to see >> how you, Curt, implement this fabulous process. >> >> >> >> I'm currently building a storage "wall" for the REVO to store all it's >> parts, a framed peg board panel secured to the back of the REVO stand. It >> will be two sided and have a box of boxes (drawers) for which the REVO will >> cut the finger joints. >> >> Have stalled out on the ball and nested bowl turner temporarily. ADHD >> kicked in and some shop housekeeping (oh LOOK! a shiny object) and now >> Curt's distraction. Life is hard. But I'm eternally grateful for the >> privileges and opportunities we still have! >> >> >> >> Happy New Year everyone! >> >> >> >> Hoo boi. An idea just popped into my head. Must go write it down >> before I forget! >> >> DanK >> >> >> >> On Saturday, December 30, 2023 at 10:37:33 PM UTC-5 Tim Ziegler wrote: >> >> Hey Curt >> >> >> >> Super excited to see what you come up with with your new toy. should be >> an exciting time. >> >> I will have to watch those videos tomorrow. Thanks for sharing this. >> >> >> >> I have a bunch of wood projects going but nothing LOM related. >> >> though I did round a couple spindles last night with my new spo
Re: New Year ahead!
yup very interesting stuff for sure. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Dec 31, 2023 at 2:47 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello Everyone. > > Thank you Ed. > > This Group was formed to help Legacy users achieve as much as we can, > by the use of sharing information and ideas. > > This Oval jig is just one of the ideas that I want to explore. > Here are some photo's of what I have up to date. > > This is what I have now. > Please let me explain what is happening here. (NO Video yet.) > the Rotary table turns with the Legacy headstock. My table has a > vacuum port in the center, Its not being used at this time, So I have a > 1/4" rod running threw the vacuum hole at this time. > The idea here is called a Planetary gear set. > The center gear is the Sun gear, and the other is a planetary gear. > it moves around the sun gear, (like the planets do around our sun in this > solar system.) What is a little confusing here is the table turns by the > sun gear is > held in place by the use of the 1/4" rod . > The planetary gear will have a rod on it to push or pull the table as it > moves around > the table. Making the Oval. > I am using 14" drawer slides to hold the top on this jig. > I do not have a cam/arm to adjust the ovals size made as yet. but > everything works > as designed so far. > Here is a video that shows what I am looking to do. > https://www.youtube.com/watch?v=fSiD7lL8P_k > > Any and all suggestion or comments are welcome. > > C.A.G. > > On Sunday, December 31, 2023 at 10:23:42 AM EST, > wrote: > > > Curt, > > You inspire me ! > > Thank you ! > > > > *Ed Trevillian* > > edn...@gmail.com > > Cell 704-776-5591 > > > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *cdkr...@gmail.com > *Sent:* Sunday, December 31, 2023 9:42 AM > *To:* Legacy Ornamental Mills > *Subject:* Re: New Year ahead! > > > > This is an idea I've had for several years but have never taken the time > to engineer the Archimedes compass mechanism. I had a wooden "Bridgeport" > router mill that it was to be it's first implementation, but I gave up that > home built machine in the move to IN. Now it will be interesting to see > how you, Curt, implement this fabulous process. > > > > I'm currently building a storage "wall" for the REVO to store all it's > parts, a framed peg board panel secured to the back of the REVO stand. It > will be two sided and have a box of boxes (drawers) for which the REVO will > cut the finger joints. > > Have stalled out on the ball and nested bowl turner temporarily. ADHD > kicked in and some shop housekeeping (oh LOOK! a shiny object) and now > Curt's distraction. Life is hard. But I'm eternally grateful for the > privileges and opportunities we still have! > > > > Happy New Year everyone! > > > > Hoo boi. An idea just popped into my head. Must go write it down before > I forget! > > DanK > > > > On Saturday, December 30, 2023 at 10:37:33 PM UTC-5 Tim Ziegler wrote: > > Hey Curt > > > > Super excited to see what you come up with with your new toy. should be an > exciting time. > > I will have to watch those videos tomorrow. Thanks for sharing this. > > > > I have a bunch of wood projects going but nothing LOM related. > > though I did round a couple spindles last night with my new spoil board > bit. > > Works awesome. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > Ziegler Laser Worx LLC > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Sat, Dec 30, 2023 at 8:10 PM 'Curt George' via Legacy Ornamental Mills < > legacy-orna...@googlegroups.com> wrote: > > Hello Everyone. > > > > Just a short note to say hello and wish you all a Very Happy New years. > > Hopefully 2024 will be a better year for all. > > > > Dose anyone have any "Pet" Projects coming up, that they would like to > share? > > I have a number of them that I will share as soon as they are completed. > And ONE that is in the works now. > > I can and will go into details on this project if anyone is interested? > > I found this Video of what One person did, I know that the same thin
Re: New Year ahead!
Hey Dan Just got back form Home Depot. Did you know that they sell both plastic and steel Pag board? the ones that I was looking at were appx. 2'x2" something like that might work well with your parts idea. This stuff is New to me. Best of luck. C.A.G. On Sunday, December 31, 2023 at 9:42:15 AM UTC-5 cdkr...@gmail.com wrote: > This is an idea I've had for several years but have never taken the time > to engineer the Archimedes compass mechanism. I had a wooden "Bridgeport" > router mill that it was to be it's first implementation, but I gave up that > home built machine in the move to IN. Now it will be interesting to see > how you, Curt, implement this fabulous process. > > I'm currently building a storage "wall" for the REVO to store all it's > parts, a framed peg board panel secured to the back of the REVO stand. It > will be two sided and have a box of boxes (drawers) for which the REVO will > cut the finger joints. > [image: REVOBackboard.png] > Have stalled out on the ball and nested bowl turner temporarily. ADHD > kicked in and some shop housekeeping (oh LOOK! a shiny object) and now > Curt's distraction. Life is hard. But I'm eternally grateful for the > privileges and opportunities we still have! > > Happy New Year everyone! > > Hoo boi. An idea just popped into my head. Must go write it down before > I forget! > DanK > > On Saturday, December 30, 2023 at 10:37:33 PM UTC-5 Tim Ziegler wrote: > >> Hey Curt >> >> Super excited to see what you come up with with your new toy. should be >> an exciting time. >> I will have to watch those videos tomorrow. Thanks for sharing this. >> >> I have a bunch of wood projects going but nothing LOM related. >> though I did round a couple spindles last night with my new spoil board >> bit. >> Works awesome. >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> Ziegler Laser Worx LLC >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> >> >> On Sat, Dec 30, 2023 at 8:10 PM 'Curt George' via Legacy Ornamental Mills >> wrote: >> >>> Hello Everyone. >>> >>> Just a short note to say hello and wish you all a Very Happy New years. >>> Hopefully 2024 will be a better year for all. >>> >>> Dose anyone have any "Pet" Projects coming up, that they would like to >>> share? >>> I have a number of them that I will share as soon as they are completed. >>> And ONE that is in the works now. >>> I can and will go into details on this project if anyone is interested? >>> I found this Video of what One person did, I know that the same thing >>> can be done on the Legacy, So last week I started on my version. >>> https://www.youtube.com/watch?v=a4YseqnjWjs >>> https://www.youtube.com/shorts/cw6T2ZbYJuM >>> and how it could have been done. >>> https://www.youtube.com/watch?v=TjaBYsAlwGc >>> >>> If all goes well, I should have it done Early Next year. ;-) >>> >>> Lets hear what you think? >>> >>> talk to you all more latter. >>> have a good night. and a Happy New Year. >>> >>> C.A.G. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1640233350.3834987.1703988637732%40mail.yahoo.com >>> >>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1640233350.3834987.1703988637732%40mail.yahoo.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/fafb6701-4b18-4682-94e6-8c17ed4769d1n%40googlegroups.com.
Re: New Year ahead!
Wow impressive Dan. I'm sure we will have more questions too. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Dec 31, 2023 at 8:42 AM cdkr...@gmail.com wrote: > This is an idea I've had for several years but have never taken the time > to engineer the Archimedes compass mechanism. I had a wooden "Bridgeport" > router mill that it was to be it's first implementation, but I gave up that > home built machine in the move to IN. Now it will be interesting to see > how you, Curt, implement this fabulous process. > > I'm currently building a storage "wall" for the REVO to store all it's > parts, a framed peg board panel secured to the back of the REVO stand. It > will be two sided and have a box of boxes (drawers) for which the REVO will > cut the finger joints. > [image: REVOBackboard.png] > Have stalled out on the ball and nested bowl turner temporarily. ADHD > kicked in and some shop housekeeping (oh LOOK! a shiny object) and now > Curt's distraction. Life is hard. But I'm eternally grateful for the > privileges and opportunities we still have! > > Happy New Year everyone! > > Hoo boi. An idea just popped into my head. Must go write it down before > I forget! > DanK > > On Saturday, December 30, 2023 at 10:37:33 PM UTC-5 Tim Ziegler wrote: > >> Hey Curt >> >> Super excited to see what you come up with with your new toy. should be >> an exciting time. >> I will have to watch those videos tomorrow. Thanks for sharing this. >> >> I have a bunch of wood projects going but nothing LOM related. >> though I did round a couple spindles last night with my new spoil board >> bit. >> Works awesome. >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> Ziegler Laser Worx LLC >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> >> >> On Sat, Dec 30, 2023 at 8:10 PM 'Curt George' via Legacy Ornamental Mills >> wrote: >> >>> Hello Everyone. >>> >>> Just a short note to say hello and wish you all a Very Happy New years. >>> Hopefully 2024 will be a better year for all. >>> >>> Dose anyone have any "Pet" Projects coming up, that they would like to >>> share? >>> I have a number of them that I will share as soon as they are completed. >>> And ONE that is in the works now. >>> I can and will go into details on this project if anyone is interested? >>> I found this Video of what One person did, I know that the same thing >>> can be done on the Legacy, So last week I started on my version. >>> https://www.youtube.com/watch?v=a4YseqnjWjs >>> https://www.youtube.com/shorts/cw6T2ZbYJuM >>> and how it could have been done. >>> https://www.youtube.com/watch?v=TjaBYsAlwGc >>> >>> If all goes well, I should have it done Early Next year. ;-) >>> >>> Lets hear what you think? >>> >>> talk to you all more latter. >>> have a good night. and a Happy New Year. >>> >>> C.A.G. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1640233350.3834987.1703988637732%40mail.yahoo.com >>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1640233350.3834987.1703988637732%40mail.yahoo.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/bff5ed95-b12e-47f3-9852-366d1743f6a7n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/bff5ed95-b12e-47f3-9852-366d1743f6a7n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEG%3DtJsgDTA2mQFSVxNB0D6N8BA1BRdQLWkC6rZgxvX_w%40mail.gmail.com.
RE: New Year ahead!
Curt, You inspire me ! Thank you ! Ed Trevillian <mailto:edn...@gmail.com> edn...@gmail.com Cell 704-776-5591 From: legacy-ornamental-mills@googlegroups.com On Behalf Of cdkr...@gmail.com Sent: Sunday, December 31, 2023 9:42 AM To: Legacy Ornamental Mills Subject: Re: New Year ahead! This is an idea I've had for several years but have never taken the time to engineer the Archimedes compass mechanism. I had a wooden "Bridgeport" router mill that it was to be it's first implementation, but I gave up that home built machine in the move to IN. Now it will be interesting to see how you, Curt, implement this fabulous process. I'm currently building a storage "wall" for the REVO to store all it's parts, a framed peg board panel secured to the back of the REVO stand. It will be two sided and have a box of boxes (drawers) for which the REVO will cut the finger joints. Have stalled out on the ball and nested bowl turner temporarily. ADHD kicked in and some shop housekeeping (oh LOOK! a shiny object) and now Curt's distraction. Life is hard. But I'm eternally grateful for the privileges and opportunities we still have! Happy New Year everyone! Hoo boi. An idea just popped into my head. Must go write it down before I forget! DanK On Saturday, December 30, 2023 at 10:37:33 PM UTC-5 Tim Ziegler wrote: Hey Curt Super excited to see what you come up with with your new toy. should be an exciting time. I will have to watch those videos tomorrow. Thanks for sharing this. I have a bunch of wood projects going but nothing LOM related. though I did round a couple spindles last night with my new spoil board bit. Works awesome. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Dec 30, 2023 at 8:10 PM 'Curt George' via Legacy Ornamental Mills mailto:legacy-orna...@googlegroups.com> > wrote: Hello Everyone. Just a short note to say hello and wish you all a Very Happy New years. Hopefully 2024 will be a better year for all. Dose anyone have any "Pet" Projects coming up, that they would like to share? I have a number of them that I will share as soon as they are completed. And ONE that is in the works now. I can and will go into details on this project if anyone is interested? I found this Video of what One person did, I know that the same thing can be done on the Legacy, So last week I started on my version. https://www.youtube.com/watch?v=a4YseqnjWjs https://www.youtube.com/shorts/cw6T2ZbYJuM and how it could have been done. https://www.youtube.com/watch?v=TjaBYsAlwGc If all goes well, I should have it done Early Next year. ;-) Lets hear what you think? talk to you all more latter. have a good night. and a Happy New Year. C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com <mailto:legacy-ornamental...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1640233350.3834987.1703988637732%40mail.yahoo.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/1640233350.3834987.1703988637732%40mail.yahoo.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/bff5ed95-b12e-47f3-9852-366d1743f6a7n%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/bff5ed95-b12e-47f3-9852-366d1743f6a7n%40googlegroups.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/006501da3bfd%245408d2c0%24fc1a7840%24%40gmail.com.
Re: New Year ahead!
Good morning everyone. Dan, Most certainly write your ideas down. I use to use a tape player to record my ideas when I was driving to and from work. (Note: I have an 48mile trip, one way for work./lots of driving everyday.) Perhaps I should start doing it again, for some reason I stopped this practice, a while back, and never picked it up again? I think I have this Oval jig straight in my head at this time. Its just finding the "Free" Time to make it work. Dan I like your idea on the shelving for the Your REVO. I have a drawer in a filing cabinet, and three tool boxes of Legacy stuff, that I use. Tring to keep things organized can be hard at times. I wish you luck. Gota run now. have a good day. I hope to hear form others in the group? Have a great day. C.A.G. On Sunday, December 31, 2023 at 09:42:18 AM EST, cdkr...@gmail.com wrote: This is an idea I've had for several years but have never taken the time to engineer the Archimedes compass mechanism. I had a wooden "Bridgeport" router mill that it was to be it's first implementation, but I gave up that home built machine in the move to IN. Now it will be interesting to see how you, Curt, implement this fabulous process. I'm currently building a storage "wall" for the REVO to store all it's parts, a framed peg board panel secured to the back of the REVO stand. It will be two sided and have a box of boxes (drawers) for which the REVO will cut the finger joints. Have stalled out on the ball and nested bowl turner temporarily. ADHD kicked in and some shop housekeeping (oh LOOK! a shiny object) and now Curt's distraction. Life is hard. But I'm eternally grateful for the privileges and opportunities we still have! Happy New Year everyone! Hoo boi. An idea just popped into my head. Must go write it down before I forget! DanK On Saturday, December 30, 2023 at 10:37:33 PM UTC-5 Tim Ziegler wrote: Hey Curt Super excited to see what you come up with with your new toy. should be an exciting time. I will have to watch those videos tomorrow. Thanks for sharing this. I have a bunch of wood projects going but nothing LOM related. though I did round a couple spindles last night with my new spoil board bit. Works awesome. Kind Regards, Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Sat, Dec 30, 2023 at 8:10 PM 'Curt George' via Legacy Ornamental Mills wrote: Hello Everyone. Just a short note to say hello and wish you all a Very Happy New years.Hopefully 2024 will be a better year for all. Dose anyone have any "Pet" Projects coming up, that they would like to share?I have a number of them that I will share as soon as they are completed. And ONE that is in the works now. I can and will go into details on this project if anyone is interested?I found this Video of what One person did, I know that the same thing can be done on the Legacy, So last week I started on my version.https://www.youtube.com/watch?v=a4YseqnjWjs https://www.youtube.com/shorts/cw6T2ZbYJuM and how it could have been done.https://www.youtube.com/watch?v=TjaBYsAlwGc If all goes well, I should have it done Early Next year. ;-) Lets hear what you think? talk to you all more latter.have a good night. and a Happy New Year. C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1640233350.3834987.1703988637732%40mail.yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/bff5ed95-b12e-47f3-9852-366d1743f6a7n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/503192371.3871222.1704035811193%40mail.yahoo.com.
Re: New Year ahead!
This is an idea I've had for several years but have never taken the time to engineer the Archimedes compass mechanism. I had a wooden "Bridgeport" router mill that it was to be it's first implementation, but I gave up that home built machine in the move to IN. Now it will be interesting to see how you, Curt, implement this fabulous process. I'm currently building a storage "wall" for the REVO to store all it's parts, a framed peg board panel secured to the back of the REVO stand. It will be two sided and have a box of boxes (drawers) for which the REVO will cut the finger joints. [image: REVOBackboard.png] Have stalled out on the ball and nested bowl turner temporarily. ADHD kicked in and some shop housekeeping (oh LOOK! a shiny object) and now Curt's distraction. Life is hard. But I'm eternally grateful for the privileges and opportunities we still have! Happy New Year everyone! Hoo boi. An idea just popped into my head. Must go write it down before I forget! DanK On Saturday, December 30, 2023 at 10:37:33 PM UTC-5 Tim Ziegler wrote: > Hey Curt > > Super excited to see what you come up with with your new toy. should be an > exciting time. > I will have to watch those videos tomorrow. Thanks for sharing this. > > I have a bunch of wood projects going but nothing LOM related. > though I did round a couple spindles last night with my new spoil board > bit. > Works awesome. > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 <(320)%20294-5798> shop > 320-630-2243 <(320)%20630-2243> cell > > > On Sat, Dec 30, 2023 at 8:10 PM 'Curt George' via Legacy Ornamental Mills < > legacy-orna...@googlegroups.com> wrote: > >> Hello Everyone. >> >> Just a short note to say hello and wish you all a Very Happy New years. >> Hopefully 2024 will be a better year for all. >> >> Dose anyone have any "Pet" Projects coming up, that they would like to >> share? >> I have a number of them that I will share as soon as they are completed. >> And ONE that is in the works now. >> I can and will go into details on this project if anyone is interested? >> I found this Video of what One person did, I know that the same thing can >> be done on the Legacy, So last week I started on my version. >> https://www.youtube.com/watch?v=a4YseqnjWjs >> https://www.youtube.com/shorts/cw6T2ZbYJuM >> and how it could have been done. >> https://www.youtube.com/watch?v=TjaBYsAlwGc >> >> If all goes well, I should have it done Early Next year. ;-) >> >> Lets hear what you think? >> >> talk to you all more latter. >> have a good night. and a Happy New Year. >> >> C.A.G. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/1640233350.3834987.1703988637732%40mail.yahoo.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1640233350.3834987.1703988637732%40mail.yahoo.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/bff5ed95-b12e-47f3-9852-366d1743f6a7n%40googlegroups.com.
Re: New Year ahead!
Hey Curt Super excited to see what you come up with with your new toy. should be an exciting time. I will have to watch those videos tomorrow. Thanks for sharing this. I have a bunch of wood projects going but nothing LOM related. though I did round a couple spindles last night with my new spoil board bit. Works awesome. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Dec 30, 2023 at 8:10 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello Everyone. > > Just a short note to say hello and wish you all a Very Happy New years. > Hopefully 2024 will be a better year for all. > > Dose anyone have any "Pet" Projects coming up, that they would like to > share? > I have a number of them that I will share as soon as they are completed. > And ONE that is in the works now. > I can and will go into details on this project if anyone is interested? > I found this Video of what One person did, I know that the same thing can > be done on the Legacy, So last week I started on my version. > https://www.youtube.com/watch?v=a4YseqnjWjs > https://www.youtube.com/shorts/cw6T2ZbYJuM > and how it could have been done. > https://www.youtube.com/watch?v=TjaBYsAlwGc > > If all goes well, I should have it done Early Next year. ;-) > > Lets hear what you think? > > talk to you all more latter. > have a good night. and a Happy New Year. > > C.A.G. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1640233350.3834987.1703988637732%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/1640233350.3834987.1703988637732%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF6Lrk0u5tdXTL5vNgaefxZFvCTjT%3DEuBoRC4CBo1Bpcg%40mail.gmail.com.
New Year ahead!
Hello Everyone. Just a short note to say hello and wish you all a Very Happy New years.Hopefully 2024 will be a better year for all. Dose anyone have any "Pet" Projects coming up, that they would like to share?I have a number of them that I will share as soon as they are completed. And ONE that is in the works now. I can and will go into details on this project if anyone is interested?I found this Video of what One person did, I know that the same thing can be done on the Legacy, So last week I started on my version.https://www.youtube.com/watch?v=a4YseqnjWjs https://www.youtube.com/shorts/cw6T2ZbYJuM and how it could have been done.https://www.youtube.com/watch?v=TjaBYsAlwGc If all goes well, I should have it done Early Next year. ;-) Lets hear what you think? talk to you all more latter.have a good night. and a Happy New Year. C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1640233350.3834987.1703988637732%40mail.yahoo.com.
Re: Wishing everyone a Very happy New Year.
Hey Curt, Happy new Year to you too. On Sat, Dec 31, 2022, 10:58 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Just got home. two min. to go. > > Happy New Year everyone. > > C.A.G. > > On Saturday, December 31, 2022 at 11:06:19 PM EST, > wrote: > > > Hey Arkady so good to hear from you buddy hope you’re going ok we all miss > you > > And a very happy new year to you and your family > > > > Bill > > > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Arkady Paka > *Sent:* Sunday, 1 January 2023 1:13 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Wishing everyone a Very happy New Year. > > > > Happy New Year to all!!! > > I wish you all Peace in over the World.. > > Arkady fröm Ukraine. (now from Germany) > > > > сб, 31 дек. 2022 г. в 19:52, Tim Ziegler : > > Hey Steve, > > > > Bummer on the freeze wow, not something to be expected in your neck of the > woods. Maybe the talk of global warming can be > > put to a rest now for a while lol > > > > Happy & Blessed New year to you as well. lets hope theres lots of Legacy > time in 2023 for you. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Sat, Dec 31, 2022 at 10:25 AM Steven Jacobs > wrote: > > Happy New Year all! > > > > I was getting spooled up to be more active here as life was starting to > slow down. I have a nice Revo and 900 CNC to get going again. > > That was until the deep freeze bit us while in Florida for the holidays. > Pipe burst and ran for 3 days. Repairs are in progress and Border Collie > does not like it at the Hampton Inn.. I don’t either really. > > > > Just another experience I would rather not have! LOL > > > > To all of you and your family around the world I hope you have a very > Happy and Safe New Year! > > > > Regards, > > > > Steve Jacobs > > Brighton, TN. USA > > > > > > On Dec 31, 2022, at 9:48 AM, Tim Ziegler wrote: > > > > Wishing you a happy new year as well Curt. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Sat, Dec 31, 2022 at 8:35 AM 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > > Just wanted to Wish everyone a Happy New Year. > > I hope (and pray) that This up and coming new year will be an > > even better year for Everyone. > > > > C.A.G. > > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46DF-B0B6-42A982617076%40gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46
Re: Wishing everyone a Very happy New Year.
Ditto. It’s nice to hear from you Arkady.Jeff from Connecticut Sent from my iPhoneOn Dec 31, 2022, at 9:55 PM, Tim Ziegler wrote:Hey Arkady, Happy new year from our house to yours too. Awesome to see you post. I wish you peace in your country as well. Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Sat, Dec 31, 2022 at 8:12 PM Arkady Paka <arkadyp...@gmail.com> wrote:Happy New Year to all!!!I wish you all Peace in over the World..Arkady fröm Ukraine. (now from Germany)сб, 31 дек. 2022 г. в 19:52, Tim Ziegler <timjzieg...@gmail.com>:Hey Steve,Bummer on the freeze wow, not something to be expected in your neck of the woods. Maybe the talk of global warming can be put to a rest now for a while lol Happy & Blessed New year to you as well. lets hope theres lots of Legacy time in 2023 for you.Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Sat, Dec 31, 2022 at 10:25 AM Steven Jacobs <s.jacobs0...@gmail.com> wrote:Happy New Year all!I was getting spooled up to be more active here as life was starting to slow down. I have a nice Revo and 900 CNC to get going again.That was until the deep freeze bit us while in Florida for the holidays. Pipe burst and ran for 3 days. Repairs are in progress and Border Collie does not like it at the Hampton Inn.. I don’t either really.Just another experience I would rather not have! LOLTo all of you and your family around the world I hope you have a very Happy and Safe New Year!Regards,Steve JacobsBrighton, TN. USAOn Dec 31, 2022, at 9:48 AM, Tim Ziegler <timjzieg...@gmail.com> wrote:Wishing you a happy new year as well Curt. Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Sat, Dec 31, 2022 at 8:35 AM 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:Just wanted to Wish everyone a Happy New Year.I hope (and pray) that This up and coming new year will be aneven better year for Everyone.C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46DF-B0B6-42A982617076%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFOyHLBe28%2BhQCM2-Q8fntaS%2B8gwB1ZWqwz8AXQ7F8WrA%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CANzkk58vkwQsrBFGXgso8RHbqZTkzTtOAdKF-HS-FvQwxVgWEg%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGymKmA_beL-D2cZs4WFc5QB5sJtW5iV2O-MaZjMQORng%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.c
Re: Wishing everyone a Very happy New Year.
Just got home. two min. to go. Happy New Year everyone. C.A.G. On Saturday, December 31, 2022 at 11:06:19 PM EST, wrote: Hey Arkady so good to hear from you buddy hope you’re going ok we all miss you And a very happy new year to you and your family Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Arkady Paka Sent: Sunday, 1 January 2023 1:13 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Wishing everyone a Very happy New Year. Happy New Year to all!!! I wish you all Peace in over the World.. Arkady fröm Ukraine. (now from Germany) сб, 31 дек. 2022 г. в 19:52, Tim Ziegler : Hey Steve, Bummer on the freeze wow, not something to be expected in your neck of the woods. Maybe the talk of global warming can be put to a rest now for a while lol Happy & Blessed New year to you as well. lets hope theres lots of Legacy time in 2023 for you. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Dec 31, 2022 at 10:25 AM Steven Jacobs wrote: Happy New Year all! I was getting spooled up to be more active here as life was starting to slow down. I have a nice Revo and 900 CNC to get going again. That was until the deep freeze bit us while in Florida for the holidays. Pipe burst and ran for 3 days. Repairs are in progress and Border Collie does not like it at the Hampton Inn.. I don’t either really. Just another experience I would rather not have! LOL To all of you and your family around the world I hope you have a very Happy and Safe New Year! Regards, Steve Jacobs Brighton, TN. USA On Dec 31, 2022, at 9:48 AM, Tim Ziegler wrote: Wishing you a happy new year as well Curt. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Dec 31, 2022 at 8:35 AM 'Curt George' via Legacy Ornamental Mills wrote: Just wanted to Wish everyone a Happy New Year. I hope (and pray) that This up and coming new year will be an even better year for Everyone. C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46DF-B0B6-42A982617076%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFOyHLBe28%2BhQCM2-Q8fntaS%2B8gwB1ZWqwz8AXQ7F8WrA%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CANzkk58vkwQsrBFGXgso8RHbqZTkzTtOAdKF-HS-FvQwxVgWEg%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001401d91d96%2462a6aa90%2427f3ffb0%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails f
RE: Wishing everyone a Very happy New Year.
Hey Arkady so good to hear from you buddy hope you’re going ok we all miss you And a very happy new year to you and your family Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Arkady Paka Sent: Sunday, 1 January 2023 1:13 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Wishing everyone a Very happy New Year. Happy New Year to all!!! I wish you all Peace in over the World.. Arkady fröm Ukraine. (now from Germany) сб, 31 дек. 2022 г. в 19:52, Tim Ziegler mailto:timjzieg...@gmail.com> >: Hey Steve, Bummer on the freeze wow, not something to be expected in your neck of the woods. Maybe the talk of global warming can be put to a rest now for a while lol Happy & Blessed New year to you as well. lets hope theres lots of Legacy time in 2023 for you. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Dec 31, 2022 at 10:25 AM Steven Jacobs mailto:s.jacobs0...@gmail.com> > wrote: Happy New Year all! I was getting spooled up to be more active here as life was starting to slow down. I have a nice Revo and 900 CNC to get going again. That was until the deep freeze bit us while in Florida for the holidays. Pipe burst and ran for 3 days. Repairs are in progress and Border Collie does not like it at the Hampton Inn.. I don’t either really. Just another experience I would rather not have! LOL To all of you and your family around the world I hope you have a very Happy and Safe New Year! Regards, Steve Jacobs Brighton, TN. USA On Dec 31, 2022, at 9:48 AM, Tim Ziegler mailto:timjzieg...@gmail.com> > wrote: Wishing you a happy new year as well Curt. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Dec 31, 2022 at 8:35 AM 'Curt George' via Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> > wrote: Just wanted to Wish everyone a Happy New Year. I hope (and pray) that This up and coming new year will be an even better year for Everyone. C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46DF-B0B6-42A982617076%40gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46DF-B0B6-42A982617076%40gmail.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFOyHLBe28%2BhQCM2-Q8fntaS%2B8gwB1ZWqwz8AXQ7F8WrA%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFOyHLBe28%2BhQCM2-Q8fntaS%2B8gwB1ZWqwz8AXQ7F8WrA%40mail.gmail.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Googl
Re: Wishing everyone a Very happy New Year.
Hey Arkady, Happy new year from our house to yours too. Awesome to see you post. I wish you peace in your country as well. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Dec 31, 2022 at 8:12 PM Arkady Paka wrote: > Happy New Year to all!!! > I wish you all Peace in over the World.. > Arkady fröm Ukraine. (now from Germany) > > сб, 31 дек. 2022 г. в 19:52, Tim Ziegler : > >> Hey Steve, >> >> Bummer on the freeze wow, not something to be expected in your neck of >> the woods. Maybe the talk of global warming can be >> put to a rest now for a while lol >> >> Happy & Blessed New year to you as well. lets hope theres lots of Legacy >> time in 2023 for you. >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 shop >> 320-630-2243 cell >> >> >> On Sat, Dec 31, 2022 at 10:25 AM Steven Jacobs >> wrote: >> >>> Happy New Year all! >>> >>> I was getting spooled up to be more active here as life was starting to >>> slow down. I have a nice Revo and 900 CNC to get going again. >>> That was until the deep freeze bit us while in Florida for the holidays. >>> Pipe burst and ran for 3 days. Repairs are in progress and Border Collie >>> does not like it at the Hampton Inn.. I don’t either really. >>> >>> Just another experience I would rather not have! LOL >>> >>> To all of you and your family around the world I hope you have a very >>> Happy and Safe New Year! >>> >>> Regards, >>> >>> Steve Jacobs >>> Brighton, TN. USA >>> >>> >>> On Dec 31, 2022, at 9:48 AM, Tim Ziegler wrote: >>> >>> Wishing you a happy new year as well Curt. >>> >>> Kind Regards, >>> >>> Timothy J. Ziegler >>> Ziegler WoodWork & Specialty >>> 14171 160th Ave. >>> Foreston MN 56330 >>> >>> 320-294-5798 shop >>> 320-630-2243 cell >>> >>> >>> On Sat, Dec 31, 2022 at 8:35 AM 'Curt George' via Legacy Ornamental >>> Mills wrote: >>> >>>> Just wanted to Wish everyone a Happy New Year. >>>> I hope (and pray) that This up and coming new year will be an >>>> even better year for Everyone. >>>> >>>> C.A.G. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Legacy Ornamental Mills" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com >>>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com >>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com?utm_medium=email&utm_source=footer> >>> . >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46DF-B0B6-42A982617076%40gmail.com >>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46DF-B0B6-42A982617076%40gmail.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- &
Re: Wishing everyone a Very happy New Year.
Happy New Year to all!!! I wish you all Peace in over the World.. Arkady fröm Ukraine. (now from Germany) сб, 31 дек. 2022 г. в 19:52, Tim Ziegler : > Hey Steve, > > Bummer on the freeze wow, not something to be expected in your neck of the > woods. Maybe the talk of global warming can be > put to a rest now for a while lol > > Happy & Blessed New year to you as well. lets hope theres lots of Legacy > time in 2023 for you. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Sat, Dec 31, 2022 at 10:25 AM Steven Jacobs > wrote: > >> Happy New Year all! >> >> I was getting spooled up to be more active here as life was starting to >> slow down. I have a nice Revo and 900 CNC to get going again. >> That was until the deep freeze bit us while in Florida for the holidays. >> Pipe burst and ran for 3 days. Repairs are in progress and Border Collie >> does not like it at the Hampton Inn.. I don’t either really. >> >> Just another experience I would rather not have! LOL >> >> To all of you and your family around the world I hope you have a very >> Happy and Safe New Year! >> >> Regards, >> >> Steve Jacobs >> Brighton, TN. USA >> >> >> On Dec 31, 2022, at 9:48 AM, Tim Ziegler wrote: >> >> Wishing you a happy new year as well Curt. >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 shop >> 320-630-2243 cell >> >> >> On Sat, Dec 31, 2022 at 8:35 AM 'Curt George' via Legacy Ornamental Mills >> wrote: >> >>> Just wanted to Wish everyone a Happy New Year. >>> I hope (and pray) that This up and coming new year will be an >>> even better year for Everyone. >>> >>> C.A.G. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com >>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com?utm_medium=email&utm_source=footer> >>> . >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46DF-B0B6-42A982617076%40gmail.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46DF-B0B6-42A982617076%40gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFOyHLBe28%2BhQCM2-Q8fntaS%2B8gwB1ZWqwz8AXQ7F8WrA%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFOyHLBe28%2BhQCM2-Q8fntaS%2B8gwB1ZWqwz8AXQ7F8WrA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CANzkk58vkwQsrBFGXgso8RHbqZTkzTtOAdKF-HS-FvQwxVgWEg%40mail.gmail.com.
Re: Wishing everyone a Very happy New Year.
Hey Steve, Bummer on the freeze wow, not something to be expected in your neck of the woods. Maybe the talk of global warming can be put to a rest now for a while lol Happy & Blessed New year to you as well. lets hope theres lots of Legacy time in 2023 for you. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Dec 31, 2022 at 10:25 AM Steven Jacobs wrote: > Happy New Year all! > > I was getting spooled up to be more active here as life was starting to > slow down. I have a nice Revo and 900 CNC to get going again. > That was until the deep freeze bit us while in Florida for the holidays. > Pipe burst and ran for 3 days. Repairs are in progress and Border Collie > does not like it at the Hampton Inn.. I don’t either really. > > Just another experience I would rather not have! LOL > > To all of you and your family around the world I hope you have a very > Happy and Safe New Year! > > Regards, > > Steve Jacobs > Brighton, TN. USA > > > On Dec 31, 2022, at 9:48 AM, Tim Ziegler wrote: > > Wishing you a happy new year as well Curt. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Sat, Dec 31, 2022 at 8:35 AM 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > >> Just wanted to Wish everyone a Happy New Year. >> I hope (and pray) that This up and coming new year will be an >> even better year for Everyone. >> >> C.A.G. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com?utm_medium=email&utm_source=footer> >> . >> > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46DF-B0B6-42A982617076%40gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46DF-B0B6-42A982617076%40gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFOyHLBe28%2BhQCM2-Q8fntaS%2B8gwB1ZWqwz8AXQ7F8WrA%40mail.gmail.com.
Re: Wishing everyone a Very happy New Year.
…and may 2023 be better for us all Rick > On Dec 31, 2022, at 11:25 AM, Steven Jacobs wrote: > > Happy New Year all! > > I was getting spooled up to be more active here as life was starting to slow > down. I have a nice Revo and 900 CNC to get going again. > That was until the deep freeze bit us while in Florida for the holidays. Pipe > burst and ran for 3 days. Repairs are in progress and Border Collie does not > like it at the Hampton Inn.. I don’t either really. > > Just another experience I would rather not have! LOL > > To all of you and your family around the world I hope you have a very Happy > and Safe New Year! > > Regards, > > Steve Jacobs > Brighton, TN. USA > > >> On Dec 31, 2022, at 9:48 AM, Tim Ziegler wrote: >> >> Wishing you a happy new year as well Curt. >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 shop >> 320-630-2243 cell >> >> >> On Sat, Dec 31, 2022 at 8:35 AM 'Curt George' via Legacy Ornamental Mills >> > <mailto:legacy-ornamental-mills@googlegroups.com>> wrote: >> Just wanted to Wish everyone a Happy New Year. >> I hope (and pray) that This up and coming new year will be an >> even better year for Everyone. >> >> C.A.G. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com >> <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com?utm_medium=email&utm_source=footer>. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com >> <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com?utm_medium=email&utm_source=footer>. > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com > <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46DF-B0B6-42A982617076%40gmail.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46DF-B0B6-42A982617076%40gmail.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/97666409-65D8-450A-BB4C-3F494AC0C844%40gmail.com.
Re: Wishing everyone a Very happy New Year.
Wow what a mess Steve. How it all turns out well.Happy New Year to all.DensonSent from Denson's iPhoneOn Dec 31, 2022, at 10:30 AM, Steven Jacobs wrote:Happy New Year all!I was getting spooled up to be more active here as life was starting to slow down. I have a nice Revo and 900 CNC to get going again.That was until the deep freeze bit us while in Florida for the holidays. Pipe burst and ran for 3 days. Repairs are in progress and Border Collie does not like it at the Hampton Inn.. I don’t either really.Just another experience I would rather not have! LOLTo all of you and your family around the world I hope you have a very Happy and Safe New Year!Regards,Steve JacobsBrighton, TN. USAOn Dec 31, 2022, at 9:48 AM, Tim Ziegler wrote:Wishing you a happy new year as well Curt. Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Sat, Dec 31, 2022 at 8:35 AM 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:Just wanted to Wish everyone a Happy New Year.I hope (and pray) that This up and coming new year will be aneven better year for Everyone.C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46DF-B0B6-42A982617076%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/F042060B-A73E-4F66-89C3-7B8EC071FC9C%40yahoo.com.
Re: Wishing everyone a Very happy New Year.
Happy New Year all! I was getting spooled up to be more active here as life was starting to slow down. I have a nice Revo and 900 CNC to get going again. That was until the deep freeze bit us while in Florida for the holidays. Pipe burst and ran for 3 days. Repairs are in progress and Border Collie does not like it at the Hampton Inn.. I don’t either really. Just another experience I would rather not have! LOL To all of you and your family around the world I hope you have a very Happy and Safe New Year! Regards, Steve Jacobs Brighton, TN. USA > On Dec 31, 2022, at 9:48 AM, Tim Ziegler wrote: > > Wishing you a happy new year as well Curt. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Sat, Dec 31, 2022 at 8:35 AM 'Curt George' via Legacy Ornamental Mills > <mailto:legacy-ornamental-mills@googlegroups.com>> wrote: >> Just wanted to Wish everyone a Happy New Year. >> I hope (and pray) that This up and coming new year will be an >> even better year for Everyone. >> >> C.A.G. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com >> <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com?utm_medium=email&utm_source=footer>. > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com > <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2FE106C3-A04F-46DF-B0B6-42A982617076%40gmail.com.
Re: Wishing everyone a Very happy New Year.
Wishing you a happy new year as well Curt. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Dec 31, 2022 at 8:35 AM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Just wanted to Wish everyone a Happy New Year. > I hope (and pray) that This up and coming new year will be an > even better year for Everyone. > > C.A.G. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMfbBiacnKEPwVpJP2wjpcumpvT7XbH6p%3D_e_FRTyRWw%40mail.gmail.com.
Wishing everyone a Very happy New Year.
Just wanted to Wish everyone a Happy New Year.I hope (and pray) that This up and coming new year will be aneven better year for Everyone. C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1372737295.2202173.1672497295706%40mail.yahoo.com.
Re: new year
Hey Milt, Nice short story, and thanks for sharing. Maybe some of us in Minnesota can do some wood swapping. We have ample oaks and ash popular and Birch, hard maple etc There is a saw mill in texas somewhere I will have to look him up but he sells kiln dried Mesquite as I had to find some for a job one time a few short years ago. I'll look his name up sooner then later for you, but I may have to dig. Excited for you to get your shop up and get the LOM rolling. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Jan 1, 2022 at 9:47 AM Milt wrote: > Yes it is a new year and I’m witnessing the first snow of the year in > Amarillo Texas known as the high plains vs N Texas I guess. It is presently > 14 going to 10 tonight. I lived in Dallas for 30+ years moved to Oregon > for 10+ years now back to Texas. I’m in the northern edge of mesquite > country with ample access, my 1800 LOM is still in the freight container in > which it and all my other toys remain until I get the new shop completed. > Which should have been last year but now I know it will be early this year > like maybe next week. Will have a dedicated lathe room for my 1800 LOM and > my Powermatic. Big problem is with the exception of mesquite there is > little wood available here for turning on lathe or LOM so I also brought a > small container 20’ of wood with me just in case. Neighbor has small ranch > south of here (2000 acres) infested with mesquite of various sizes and ages > that he’s willing to give me access to. Time will tell. > > While I am mostly a lurker, I tremendously enjoy the site and appreciate > the talent demonstrated. Finding wood workers let alone LOM enthusiasts in > the Amarillo area has been a challenge i would welcome contact with other > like minded in the area and once shop is set up again hope to be more than > just a lurker. Happy New Year to all from the high plains (damn few trees) > of Texas. > > Milt > > Sent from my iPhone > > On Jan 1, 2022, at 5:50 AM, Tim Ziegler wrote: > > > thanks Denson > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Fri, Dec 31, 2021 at 11:10 PM 'Denson Ingram' via Legacy Ornamental > Mills wrote: > >> It will be in N TX tmrw night. 20 degrees thank you lol. >> I hope for a >> Happy and blessed New Year to all of you >> Denson >> >> Sent from my iPad >> >> On Dec 31, 2021, at 10:22 PM, Tim Ziegler wrote: >> >> >> The winds are picking up as we speak, look out Mac here it comes. lol >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 shop >> 320-630-2243 cell >> >> >> On Fri, Dec 31, 2021 at 9:30 PM M.W.Foscue >> wrote: >> >>> I wish all ya'll a Safe, Healthy, Prosperous, and Happy New Year! >>> >>> As for all ya'll north of the Mason-Dixon Line - be greedy!! >>> >>> KEEP THAT COLD WEATHER FOR YOURSELVES!! >>> >>> Don't let ANY of it escape and drift South, PLEASE! >>> >>> Cheers! 😃 >>> >>> Mac >>> -- >>> -- >>> >>> -Original Message- >>> From: >>> Sent: Dec 31, 2021 10:08 PM >>> To: >>> Subject: Re: new year >>> >>> >>> Brrr… 🥶 >>> >>> Jeff from Connecticut >>> >>> On Dec 31, 2021, at 9:48 PM, Tim Ziegler wrote: >>> >>> Yeah if we could split the difference tonight Bill, I think you could go >>> out. We are supposed to >>> dip down around -18 below. >>> thats a huge difference. Making ice though. >>> >>> Kind Regards, >>> >>> Timothy J. Ziegler >>> Ziegler WoodWork & Specialty >>> 14171 160th Ave. >>> Foreston MN 56330 >>> >>> 320-294-5798 shop >>> 320-630-2243 cell >>> >>> On Fri, Dec 31, 2021 at 7:34 PM wrote: >>> >>>> Bit warm here today 98F over a 100 inside my shop just too hot, my shop >>>> time is over for a while >>>> >>>> >>>> >>>> Bill >>>> >>>> >>>> >>>> *From:* legacy-ornamental-mills@googlegroups.com < >>>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim
Re: new year
Thanks Milt. Good luck on the New shop and finding free wood. ;-) Have a happy New Year... C.A.G. On Saturday, January 1, 2022, 10:47:05 AM EST, Milt wrote: Yes it is a new year and I’m witnessing the first snow of the year in Amarillo Texas known as the high plains vs N Texas I guess. It is presently 14 going to 10 tonight. I lived in Dallas for 30+ years moved to Oregon for 10+ years now back to Texas. I’m in the northern edge of mesquite country with ample access, my 1800 LOM is still in the freight container in which it and all my other toys remain until I get the new shop completed. Which should have been last year but now I know it will be early this year like maybe next week. Will have a dedicated lathe room for my 1800 LOM and my Powermatic. Big problem is with the exception of mesquite there is little wood available here for turning on lathe or LOM so I also brought a small container 20’ of wood with me just in case. Neighbor has small ranch south of here (2000 acres) infested with mesquite of various sizes and ages that he’s willing to give me access to. Time will tell. While I am mostly a lurker, I tremendously enjoy the site and appreciate the talent demonstrated. Finding wood workers let alone LOM enthusiasts in the Amarillo area has been a challenge i would welcome contact with other like minded in the area and once shop is set up again hope to be more than just a lurker. Happy New Year to all from the high plains (damn few trees) of Texas. Milt Sent from my iPhone On Jan 1, 2022, at 5:50 AM, Tim Ziegler wrote: thanks Denson Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Fri, Dec 31, 2021 at 11:10 PM 'Denson Ingram' via Legacy Ornamental Mills wrote: It will be in N TX tmrw night. 20 degrees thank you lol.I hope for a Happy and blessed New Year to all of youDenson Sent from my iPad On Dec 31, 2021, at 10:22 PM, Tim Ziegler wrote: The winds are picking up as we speak, look out Mac here it comes. lol Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Fri, Dec 31, 2021 at 9:30 PM M.W.Foscue wrote: I wish all ya'll a Safe, Healthy, Prosperous, and Happy New Year! As for all ya'll north of the Mason-Dixon Line - be greedy!! KEEP THAT COLD WEATHER FOR YOURSELVES!! Don't let ANY of it escape and drift South, PLEASE! Cheers! 😃 Mac -Original Message- From: Sent: Dec 31, 2021 10:08 PM To: Subject: Re: new year Brrr… 🥶 Jeff from Connecticut On Dec 31, 2021, at 9:48 PM, Tim Ziegler wrote: Yeah if we could split the difference tonight Bill, I think you could go out. We are supposed to dip down around -18 below. thats a huge difference. Making ice though. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Fri, Dec 31, 2021 at 7:34 PM wrote: Bit warm here today 98F over a 100 inside my shop just too hot, my shop time is over for a while Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Saturday, 1 January 2022 11:28 AM To: LOM Group Subject: Re: new year Hey Bill, Happy New Year to you as well. Happy New Year to all of you in the group too. Blessings on the new year! Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Dec 31, 2021 at 2:57 PM wrote: Happy new year everyone from down under Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d7feaf%24c3599980%244a0ccc80%24%40mmnet.com.au. -- You receive
Re: new year
Yes it is a new year and I’m witnessing the first snow of the year in Amarillo Texas known as the high plains vs N Texas I guess. It is presently 14 going to 10 tonight. I lived in Dallas for 30+ years moved to Oregon for 10+ years now back to Texas. I’m in the northern edge of mesquite country with ample access, my 1800 LOM is still in the freight container in which it and all my other toys remain until I get the new shop completed. Which should have been last year but now I know it will be early this year like maybe next week. Will have a dedicated lathe room for my 1800 LOM and my Powermatic. Big problem is with the exception of mesquite there is little wood available here for turning on lathe or LOM so I also brought a small container 20’ of wood with me just in case. Neighbor has small ranch south of here (2000 acres) infested with mesquite of various sizes and ages that he’s willing to give me access to. Time will tell. While I am mostly a lurker, I tremendously enjoy the site and appreciate the talent demonstrated. Finding wood workers let alone LOM enthusiasts in the Amarillo area has been a challenge i would welcome contact with other like minded in the area and once shop is set up again hope to be more than just a lurker. Happy New Year to all from the high plains (damn few trees) of Texas. Milt Sent from my iPhone > On Jan 1, 2022, at 5:50 AM, Tim Ziegler wrote: > > > thanks Denson > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > >> On Fri, Dec 31, 2021 at 11:10 PM 'Denson Ingram' via Legacy Ornamental Mills >> wrote: >> It will be in N TX tmrw night. 20 degrees thank you lol. >> I hope for a >> Happy and blessed New Year to all of you >> Denson >> >> Sent from my iPad >> >>>> On Dec 31, 2021, at 10:22 PM, Tim Ziegler wrote: >>>> >>> >>> The winds are picking up as we speak, look out Mac here it comes. lol >>> Kind Regards, >>> >>> Timothy J. Ziegler >>> Ziegler WoodWork & Specialty >>> 14171 160th Ave. >>> Foreston MN 56330 >>> >>> 320-294-5798 shop >>> 320-630-2243 cell >>> >>> >>>> On Fri, Dec 31, 2021 at 9:30 PM M.W.Foscue wrote: >>>> I wish all ya'll a Safe, Healthy, Prosperous, and Happy New Year! >>>> As for all ya'll north of the Mason-Dixon Line - be greedy!! >>>> KEEP THAT COLD WEATHER FOR YOURSELVES!! >>>> Don't let ANY of it escape and drift South, PLEASE! >>>> Cheers! 😃 >>>> Mac >>>> -Original Message- >>>> From: >>>> Sent: Dec 31, 2021 10:08 PM >>>> To: >>>> Subject: Re: new year >>>> >>>> >>>> Brrr… 🥶 >>>> >>>> Jeff from Connecticut >>>> >>>> On Dec 31, 2021, at 9:48 PM, Tim Ziegler wrote: >>>> >>>> Yeah if we could split the difference tonight Bill, I think you could go >>>> out. We are supposed to >>>> dip down around -18 below. >>>> thats a huge difference. Making ice though. >>>> >>>> Kind Regards, >>>> >>>> Timothy J. Ziegler >>>> Ziegler WoodWork & Specialty >>>> 14171 160th Ave. >>>> Foreston MN 56330 >>>> >>>> 320-294-5798 shop >>>> 320-630-2243 cell >>>> >>>>> On Fri, Dec 31, 2021 at 7:34 PM wrote: >>>>> Bit warm here today 98F over a 100 inside my shop just too hot, my shop >>>>> time is over for a while >>>>> >>>>> >>>>> >>>>> Bill >>>>> >>>>> >>>>> >>>>> From: legacy-ornamental-mills@googlegroups.com >>>>> On Behalf Of Tim Ziegler >>>>> Sent: Saturday, 1 January 2022 11:28 AM >>>>> To: LOM Group >>>>> Subject: Re: new year >>>>> >>>>> >>>>> >>>>> Hey Bill, >>>>> >>>>> >>>>> >>>>> Happy New Year to you as well. >>>>> >>>>> >>>>> >>>>> Happy New Year to all of you in the group too. >>>>> >>>>> >>>>> >>>>> Blessings on the new year! >>>>> >>>>> >>>>> >>
Re: new year
thanks Denson Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Dec 31, 2021 at 11:10 PM 'Denson Ingram' via Legacy Ornamental Mills wrote: > It will be in N TX tmrw night. 20 degrees thank you lol. > I hope for a > Happy and blessed New Year to all of you > Denson > > Sent from my iPad > > On Dec 31, 2021, at 10:22 PM, Tim Ziegler wrote: > > > The winds are picking up as we speak, look out Mac here it comes. lol > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Fri, Dec 31, 2021 at 9:30 PM M.W.Foscue wrote: > >> I wish all ya'll a Safe, Healthy, Prosperous, and Happy New Year! >> >> As for all ya'll north of the Mason-Dixon Line - be greedy!! >> >> KEEP THAT COLD WEATHER FOR YOURSELVES!! >> >> Don't let ANY of it escape and drift South, PLEASE! >> >> Cheers! 😃 >> >> Mac >> -- >> -- >> >> -Original Message- >> From: >> Sent: Dec 31, 2021 10:08 PM >> To: >> Subject: Re: new year >> >> >> Brrr… 🥶 >> >> Jeff from Connecticut >> >> On Dec 31, 2021, at 9:48 PM, Tim Ziegler wrote: >> >> Yeah if we could split the difference tonight Bill, I think you could go >> out. We are supposed to >> dip down around -18 below. >> thats a huge difference. Making ice though. >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 shop >> 320-630-2243 cell >> >> On Fri, Dec 31, 2021 at 7:34 PM wrote: >> >>> Bit warm here today 98F over a 100 inside my shop just too hot, my shop >>> time is over for a while >>> >>> >>> >>> Bill >>> >>> >>> >>> *From:* legacy-ornamental-mills@googlegroups.com < >>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler >>> *Sent:* Saturday, 1 January 2022 11:28 AM >>> *To:* LOM Group >>> *Subject:* Re: new year >>> >>> >>> >>> Hey Bill, >>> >>> >>> >>> Happy New Year to you as well. >>> >>> >>> >>> Happy New Year to all of you in the group too. >>> >>> >>> >>> Blessings on the new year! >>> >>> >>> Kind Regards, >>> >>> >>> >>> Timothy J. Ziegler >>> >>> Ziegler WoodWork & Specialty >>> >>> 14171 160th Ave. >>> >>> Foreston MN 56330 >>> >>> >>> >>> 320-294-5798 shop >>> >>> 320-630-2243 cell >>> >>> >>> >>> >>> >>> On Fri, Dec 31, 2021 at 2:57 PM wrote: >>> >>> Happy new year everyone from down under >>> >>> >>> >>> Bill >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au >>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au?utm_medium=email&utm_source=footer> >>> . >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com >>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com?utm_medium=email&utm_source=footer> >>> . >>> >>> >>> -- >>> You received this mess
Re: new year
Happy New Year to all of you from Ukraine. Arkady. сб, 1 янв. 2022 г., 07:10 'Denson Ingram' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com>: > It will be in N TX tmrw night. 20 degrees thank you lol. > I hope for a > Happy and blessed New Year to all of you > Denson > > Sent from my iPad > > On Dec 31, 2021, at 10:22 PM, Tim Ziegler wrote: > > > The winds are picking up as we speak, look out Mac here it comes. lol > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Fri, Dec 31, 2021 at 9:30 PM M.W.Foscue wrote: > >> I wish all ya'll a Safe, Healthy, Prosperous, and Happy New Year! >> >> As for all ya'll north of the Mason-Dixon Line - be greedy!! >> >> KEEP THAT COLD WEATHER FOR YOURSELVES!! >> >> Don't let ANY of it escape and drift South, PLEASE! >> >> Cheers! 😃 >> >> Mac >> -- >> -- >> >> -Original Message- >> From: >> Sent: Dec 31, 2021 10:08 PM >> To: >> Subject: Re: new year >> >> >> Brrr… 🥶 >> >> Jeff from Connecticut >> >> On Dec 31, 2021, at 9:48 PM, Tim Ziegler wrote: >> >> Yeah if we could split the difference tonight Bill, I think you could go >> out. We are supposed to >> dip down around -18 below. >> thats a huge difference. Making ice though. >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 shop >> 320-630-2243 cell >> >> On Fri, Dec 31, 2021 at 7:34 PM wrote: >> >>> Bit warm here today 98F over a 100 inside my shop just too hot, my shop >>> time is over for a while >>> >>> >>> >>> Bill >>> >>> >>> >>> *From:* legacy-ornamental-mills@googlegroups.com < >>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler >>> *Sent:* Saturday, 1 January 2022 11:28 AM >>> *To:* LOM Group >>> *Subject:* Re: new year >>> >>> >>> >>> Hey Bill, >>> >>> >>> >>> Happy New Year to you as well. >>> >>> >>> >>> Happy New Year to all of you in the group too. >>> >>> >>> >>> Blessings on the new year! >>> >>> >>> Kind Regards, >>> >>> >>> >>> Timothy J. Ziegler >>> >>> Ziegler WoodWork & Specialty >>> >>> 14171 160th Ave. >>> >>> Foreston MN 56330 >>> >>> >>> >>> 320-294-5798 shop >>> >>> 320-630-2243 cell >>> >>> >>> >>> >>> >>> On Fri, Dec 31, 2021 at 2:57 PM wrote: >>> >>> Happy new year everyone from down under >>> >>> >>> >>> Bill >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au >>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au?utm_medium=email&utm_source=footer> >>> . >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com >>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com?utm_medium=email&utm_source=footer> >>> . >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups &qu
Re: new year
It will be in N TX tmrw night. 20 degrees thank you lol. I hope for a Happy and blessed New Year to all of you Denson Sent from my iPad > On Dec 31, 2021, at 10:22 PM, Tim Ziegler wrote: > > > The winds are picking up as we speak, look out Mac here it comes. lol > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > >> On Fri, Dec 31, 2021 at 9:30 PM M.W.Foscue wrote: >> I wish all ya'll a Safe, Healthy, Prosperous, and Happy New Year! >> As for all ya'll north of the Mason-Dixon Line - be greedy!! >> KEEP THAT COLD WEATHER FOR YOURSELVES!! >> Don't let ANY of it escape and drift South, PLEASE! >> Cheers! 😃 >> Mac >> -Original Message- >> From: >> Sent: Dec 31, 2021 10:08 PM >> To: >> Subject: Re: new year >> >> >> Brrr… 🥶 >> >> Jeff from Connecticut >> >> On Dec 31, 2021, at 9:48 PM, Tim Ziegler wrote: >> >> Yeah if we could split the difference tonight Bill, I think you could go >> out. We are supposed to >> dip down around -18 below. >> thats a huge difference. Making ice though. >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 shop >> 320-630-2243 cell >> >>> On Fri, Dec 31, 2021 at 7:34 PM wrote: >>> Bit warm here today 98F over a 100 inside my shop just too hot, my shop >>> time is over for a while >>> >>> >>> >>> Bill >>> >>> >>> >>> From: legacy-ornamental-mills@googlegroups.com >>> On Behalf Of Tim Ziegler >>> Sent: Saturday, 1 January 2022 11:28 AM >>> To: LOM Group >>> Subject: Re: new year >>> >>> >>> >>> Hey Bill, >>> >>> >>> >>> Happy New Year to you as well. >>> >>> >>> >>> Happy New Year to all of you in the group too. >>> >>> >>> >>> Blessings on the new year! >>> >>> >>> >>> Kind Regards, >>> >>> >>> >>> Timothy J. Ziegler >>> >>> Ziegler WoodWork & Specialty >>> >>> 14171 160th Ave. >>> >>> Foreston MN 56330 >>> >>> >>> >>> 320-294-5798 shop >>> >>> 320-630-2243 cell >>> >>> >>> >>> >>> >>> On Fri, Dec 31, 2021 at 2:57 PM wrote: >>> >>> Happy new year everyone from down under >>> >>> >>> >>> Bill >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com. >>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d7feaf%24c3599980%244a0ccc80%24%40mmnet.com.au. >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamenta
Re: new year
The winds are picking up as we speak, look out Mac here it comes. lol Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Dec 31, 2021 at 9:30 PM M.W.Foscue wrote: > I wish all ya'll a Safe, Healthy, Prosperous, and Happy New Year! > > As for all ya'll north of the Mason-Dixon Line - be greedy!! > > KEEP THAT COLD WEATHER FOR YOURSELVES!! > > Don't let ANY of it escape and drift South, PLEASE! > > Cheers! 😃 > > Mac > -- > -- > > -Original Message----- > From: > Sent: Dec 31, 2021 10:08 PM > To: > Subject: Re: new year > > > Brrr… 🥶 > > Jeff from Connecticut > > On Dec 31, 2021, at 9:48 PM, Tim Ziegler wrote: > > Yeah if we could split the difference tonight Bill, I think you could go > out. We are supposed to > dip down around -18 below. > thats a huge difference. Making ice though. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > On Fri, Dec 31, 2021 at 7:34 PM wrote: > >> Bit warm here today 98F over a 100 inside my shop just too hot, my shop >> time is over for a while >> >> >> >> Bill >> >> >> >> *From:* legacy-ornamental-mills@googlegroups.com < >> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler >> *Sent:* Saturday, 1 January 2022 11:28 AM >> *To:* LOM Group >> *Subject:* Re: new year >> >> >> >> Hey Bill, >> >> >> >> Happy New Year to you as well. >> >> >> >> Happy New Year to all of you in the group too. >> >> >> >> Blessings on the new year! >> >> >> Kind Regards, >> >> >> >> Timothy J. Ziegler >> >> Ziegler WoodWork & Specialty >> >> 14171 160th Ave. >> >> Foreston MN 56330 >> >> >> >> 320-294-5798 shop >> >> 320-630-2243 cell >> >> >> >> >> >> On Fri, Dec 31, 2021 at 2:57 PM wrote: >> >> Happy new year everyone from down under >> >> >> >> Bill >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d7feaf%24c3599980%244a0ccc80%24%40mmnet.com.au >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d7feaf%24c3599980%244a0ccc80%24%40mmnet.com.au?utm_medium=email&utm_source=footer> >> . > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHn5Lt8q7FWXD72Tj%3DVMnWp_Z_-NA2sXVYfyJOUASqi3Q%40mail.gma
Re: new year
yup and gets worse next week a couple days! Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Dec 31, 2021 at 9:08 PM Jeff Richmond wrote: > Brrr… 🥶 > > Jeff from Connecticut > > On Dec 31, 2021, at 9:48 PM, Tim Ziegler wrote: > > > Yeah if we could split the difference tonight Bill, I think you could go > out. We are supposed to > dip down around -18 below. > thats a huge difference. Making ice though. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Fri, Dec 31, 2021 at 7:34 PM wrote: > >> Bit warm here today 98F over a 100 inside my shop just too hot, my shop >> time is over for a while >> >> >> >> Bill >> >> >> >> *From:* legacy-ornamental-mills@googlegroups.com < >> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler >> *Sent:* Saturday, 1 January 2022 11:28 AM >> *To:* LOM Group >> *Subject:* Re: new year >> >> >> >> Hey Bill, >> >> >> >> Happy New Year to you as well. >> >> >> >> Happy New Year to all of you in the group too. >> >> >> >> Blessings on the new year! >> >> >> Kind Regards, >> >> >> >> Timothy J. Ziegler >> >> Ziegler WoodWork & Specialty >> >> 14171 160th Ave. >> >> Foreston MN 56330 >> >> >> >> 320-294-5798 shop >> >> 320-630-2243 cell >> >> >> >> >> >> On Fri, Dec 31, 2021 at 2:57 PM wrote: >> >> Happy new year everyone from down under >> >> >> >> Bill >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d7feaf%24c3599980%244a0ccc80%24%40mmnet.com.au >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d7feaf%24c3599980%244a0ccc80%24%40mmnet.com.au?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHn5Lt8q7FWXD72Tj%3DVMnWp_Z_-NA2sXVYfyJOUASqi3Q%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHn5Lt8q7FWXD72Tj%3DVMnWp_Z_-NA2sXVYfyJOUASqi3Q%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/E14A63E7-CF14-49EA-8A66-3B0E3628C7F9%40gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/E14A63E7-CF14-49EA-8A66-3B0E3628C7F9%40gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFu8DfRstNMphfAuUK35dFJ5YoUnm_aFAq38%3DuqcyYt6Q%40mail.gmail.com.
Re: new year
I wish all ya'll a Safe, Healthy, Prosperous, and Happy New Year! As for all ya'll north of the Mason-Dixon Line - be greedy!! KEEP THAT COLD WEATHER FOR YOURSELVES!! Don't let ANY of it escape and drift South, PLEASE! Cheers! 😃 Mac -Original Message- From: Sent: Dec 31, 2021 10:08 PM To: Subject: Re: new year Brrr… 🥶 Jeff from Connecticut On Dec 31, 2021, at 9:48 PM, Tim Ziegler wrote: Yeah if we could split the difference tonight Bill, I think you could go out. We are supposed to dip down around -18 below. thats a huge difference. Making ice though. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Dec 31, 2021 at 7:34 PM wrote: Bit warm here today 98F over a 100 inside my shop just too hot, my shop time is over for a while Bill From: legacy-ornamental-mills@googlegroups.com (mailto:legacy-ornamental-mills@googlegroups.com) On Behalf Of Tim Ziegler Sent: Saturday, 1 January 2022 11:28 AM To: LOM Group Subject: Re: new year Hey Bill, Happy New Year to you as well. Happy New Year to all of you in the group too. Blessings on the new year! Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Dec 31, 2021 at 2:57 PM wrote: Happy new year everyone from down under Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com (mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com). To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com (mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com). To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com (mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com). To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d7feaf%24c3599980%244a0ccc80%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com (mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com). To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHn5Lt8q7FWXD72Tj%3DVMnWp_Z_-NA2sXVYfyJOUASqi3Q%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com (mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com). To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/E14A63E7-CF14-49EA-8A66-3B0E3628C7F9%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/93afd25f-1fe3-bcbe-7558-ddf1a410d4ab%40earthlink.net.
Re: new year
Brrr… 🥶 Jeff from Connecticut > On Dec 31, 2021, at 9:48 PM, Tim Ziegler wrote: > > > Yeah if we could split the difference tonight Bill, I think you could go out. > We are supposed to > dip down around -18 below. > thats a huge difference. Making ice though. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > >> On Fri, Dec 31, 2021 at 7:34 PM wrote: >> Bit warm here today 98F over a 100 inside my shop just too hot, my shop time >> is over for a while >> >> >> >> Bill >> >> >> >> From: legacy-ornamental-mills@googlegroups.com >> On Behalf Of Tim Ziegler >> Sent: Saturday, 1 January 2022 11:28 AM >> To: LOM Group >> Subject: Re: new year >> >> >> >> Hey Bill, >> >> >> >> Happy New Year to you as well. >> >> >> >> Happy New Year to all of you in the group too. >> >> >> >> Blessings on the new year! >> >> >> >> Kind Regards, >> >> >> >> Timothy J. Ziegler >> >> Ziegler WoodWork & Specialty >> >> 14171 160th Ave. >> >> Foreston MN 56330 >> >> >> >> 320-294-5798 shop >> >> 320-630-2243 cell >> >> >> >> >> >> On Fri, Dec 31, 2021 at 2:57 PM wrote: >> >> Happy new year everyone from down under >> >> >> >> Bill >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d7feaf%24c3599980%244a0ccc80%24%40mmnet.com.au. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHn5Lt8q7FWXD72Tj%3DVMnWp_Z_-NA2sXVYfyJOUASqi3Q%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/E14A63E7-CF14-49EA-8A66-3B0E3628C7F9%40gmail.com.
Re: new year
Yeah if we could split the difference tonight Bill, I think you could go out. We are supposed to dip down around -18 below. thats a huge difference. Making ice though. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Dec 31, 2021 at 7:34 PM wrote: > Bit warm here today 98F over a 100 inside my shop just too hot, my shop > time is over for a while > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Saturday, 1 January 2022 11:28 AM > *To:* LOM Group > *Subject:* Re: new year > > > > Hey Bill, > > > > Happy New Year to you as well. > > > > Happy New Year to all of you in the group too. > > > > Blessings on the new year! > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Fri, Dec 31, 2021 at 2:57 PM wrote: > > Happy new year everyone from down under > > > > Bill > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d7feaf%24c3599980%244a0ccc80%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d7feaf%24c3599980%244a0ccc80%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHn5Lt8q7FWXD72Tj%3DVMnWp_Z_-NA2sXVYfyJOUASqi3Q%40mail.gmail.com.
RE: new year
Bit warm here today 98F over a 100 inside my shop just too hot, my shop time is over for a while Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Saturday, 1 January 2022 11:28 AM To: LOM Group Subject: Re: new year Hey Bill, Happy New Year to you as well. Happy New Year to all of you in the group too. Blessings on the new year! Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Dec 31, 2021 at 2:57 PM mailto:bulke...@mmnet.com.au> > wrote: Happy new year everyone from down under Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au <https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d7feaf%24c3599980%244a0ccc80%24%40mmnet.com.au.
Re: new year
yeah for sure Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Dec 31, 2021 at 3:09 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Happy New Year to you as well Bill. > > I hope and Pray that Next year will be better for all. (Lets Go 22!) ;-) > > C.A.G. > > On Friday, December 31, 2021, 03:57:17 PM EST, bulke...@mmnet.com.au < > bulke...@mmnet.com.au> wrote: > > > Happy new year everyone from down under > > > > Bill > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/920896595.409756.1640984983372%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/920896595.409756.1640984983372%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF_xr4CjkOE0scp4uMvuXK77bbeSCxkRz9M7rdvkUHupA%40mail.gmail.com.
Re: new year
Hey Bill, Happy New Year to you as well. Happy New Year to all of you in the group too. Blessings on the new year! Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Dec 31, 2021 at 2:57 PM wrote: > Happy new year everyone from down under > > > > Bill > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGEhfDsg29v0HHmHUg_%2BJ1OyHPq7SwiogtzQApqhjFvvw%40mail.gmail.com.
Re: new year
Happy New Year to you as well Bill. I hope and Pray that Next year will be better for all. (Lets Go 22!) ;-) C.A.G. On Friday, December 31, 2021, 03:57:17 PM EST, bulke...@mmnet.com.au wrote: Happy new year everyone from down under Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/920896595.409756.1640984983372%40mail.yahoo.com.
new year
Happy new year everyone from down under Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d7fe88%24f6eb1d90%24e4c158b0%24%40mmnet.com.au.
Re: Happy New Year good by 2020
Mork from Ork? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Jan 1, 2021 at 11:51 AM Okla Mike (Liltwisted) < legacym...@iglide.net> wrote: > True story, I walked by a young high school girl the other day. She was > wearing a mask and I said on my way by. "I sure have saved a lot of money > on lipstick" She said, "Yeah me too!" Then it hit her, she was talking to > an old dude with a beard. Pam told me to stop messing with her! I just > laughed! Can't take me anywhere! > > Here is to a new year filled with many opportunities to mess with as many > people as one can, each and every day. Nah noo Nah noo! > > Mike OK > > PS and may God have mercy on our souls! > On 1/1/2021 9:04 AM, Michael Kratky wrote: > > Happy New Year good riddance to 2020; > > > > 1. The dumbest thing I ever bought was a 2020 planner. > > 2. I was so bored I called Jake from State Farm just to talk to someone. > He asked me what I was wearing. > > 3. 2019: Stay away from negative people. 2020: Stay away from positive > people. > > 4. The world has turned upside down. Old folks are sneaking out of the > house & their kids are yelling at them to stay indoors! > > 5. This morning I saw a neighbor talking to her dog. It was obvious she > thought her dog understood her. I came into my house & told my cat. We > laughed a lot. > > 6. Every few days try your jeans on just to make sure they fit. Pajamas > will have you believe all is well in the kingdom. > > 7. Does anyone know if we can take showers yet or should we just keep > washing our hands? > > 8. This virus has done what no woman has been able to do. Cancel sports, > shut down all bars & keep men at home! > > 9. I never thought the comment, “I wouldn’t touch him/her with a 6-foot > pole” would become a national policy, but here we are! > > 10. I need to practice social-distancing from the refrigerator. > > 11. I hope the weather is good tomorrow for my trip to the Backyard. I’m > getting tired of the Living Room. > > 12. Never in a million years could I have imagined I would go up to a bank > teller wearing a mask & ask for money. > > > > > > > > *From:* legacy-ornamental-mills@googlegroups.com [ > mailto:legacy-ornamental-mills@googlegroups.com > ] *On Behalf Of *Richard Ellis > *Sent:* Friday, January 01, 2021 5:00 AM > *To:* Legacy Ornamental Mills > *Subject:* New Year > > > > A safe and prosperous 2021 to all the members of this group > > From Richard in the U K > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/be59d895-676c-46b0-adb6-ce15de6a62a4n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/be59d895-676c-46b0-adb6-ce15de6a62a4n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/004701d6e04f%245bb2c8d0%2413185a70%24%40com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/004701d6e04f%245bb2c8d0%2413185a70%24%40com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/c38b1ec9-1c3a-ae79-399d-99b5d60a45c4%40iglide.net > <https://groups.google.com/d/msgid/legacy-ornamental-mills/c38b1ec9-1c3a-ae79-399d-99b5d60a45c4%40iglide.net?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH6xc7GnsdQq2cW3hgQA08QBEVAn7KwF0XiqiqinCdGdA%40mail.gmail.com.
Re: Happy New Year good by 2020
Thanks Mike. Lots of fun reads, Thanks for your Notes. ;-) C.A.G. On Friday, January 1, 2021, 12:51:03 PM EST, Okla Mike (Liltwisted) wrote: True story, I walked by a young high school girl the other day. She was wearing a mask and I said on my way by. "I sure have saved a lot of money on lipstick" She said, "Yeah me too!" Then it hit her, she was talking to an old dude with a beard. Pam told me to stop messing with her! I just laughed! Can't take me anywhere! Here is to a new year filled with many opportunities to mess with as many people as one can, each and every day. Nah noo Nah noo! Mike OK PS and may God have mercy on our souls! On 1/1/2021 9:04 AM, Michael Kratky wrote: _filtered {} _filtered {} _filtered {} _filtered {}#yiv3893179800 p.yiv3893179800MsoNormal, #yiv3893179800 li.yiv3893179800MsoNormal, #yiv3893179800 div.yiv3893179800MsoNormal {margin:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:New;}#yiv3893179800 a:link, #yiv3893179800 span.yiv3893179800MsoHyperlink {color:blue;text-decoration:underline;}#yiv3893179800 a:visited, #yiv3893179800 span.yiv3893179800MsoHyperlinkFollowed {color:purple;text-decoration:underline;}#yiv3893179800 p {margin-right:0in;margin-left:0in;font-size:12.0pt;font-family:New;}#yiv3893179800 span.yiv3893179800EmailStyle18 {font-family:Sans;color:black;font-weight:normal;font-style:normal;}#yiv3893179800 .yiv3893179800MsoChpDefault {}#yiv3893179800 div.yiv3893179800WordSection1 {} Happy New Year good riddance to 2020; 1. The dumbest thing I ever bought was a 2020 planner. 2. I was so bored I called Jake from State Farm just to talk to someone. He asked me what I was wearing. 3. 2019: Stay away from negative people. 2020: Stay away from positive people. 4. The world has turned upside down. Old folks are sneaking out of the house & their kids are yelling at them to stay indoors! 5. This morning I saw a neighbor talking to her dog. It was obvious she thought her dog understood her. I came into my house & told my cat. We laughed a lot. 6. Every few days try your jeans on just to make sure they fit. Pajamas will have you believe all is well in the kingdom. 7. Does anyone know if we can take showers yet or should we just keep washing our hands? 8. This virus has done what no woman has been able to do. Cancel sports, shut down all bars & keep men at home! 9. I never thought the comment, “I wouldn’t touch him/her with a 6-foot pole” would become a national policy, but here we are! 10. I need to practice social-distancing from the refrigerator. 11. I hope the weather is good tomorrow for my trip to the Backyard. I’m getting tired of the Living Room. 12. Never in a million years could I have imagined I would go up to a bank teller wearing a mask & ask for money. From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis Sent: Friday, January 01, 2021 5:00 AM To: Legacy Ornamental Mills Subject: New Year A safe and prosperous 2021 to all the members of this group >From Richard in the U K -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/be59d895-676c-46b0-adb6-ce15de6a62a4n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/004701d6e04f%245bb2c8d0%2413185a70%24%40com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/c38b1ec9-1c3a-ae79-399d-99b5d60a45c4%40iglide.net. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1797321603.3842553.1609532871803%40mail.yahoo.com.
Re: Happy New Year good by 2020
True story, I walked by a young high school girl the other day. She was wearing a mask and I said on my way by. "I sure have saved a lot of money on lipstick" She said, "Yeah me too!" Then it hit her, she was talking to an old dude with a beard. Pam told me to stop messing with her! I just laughed! Can't take me anywhere! Here is to a new year filled with many opportunities to mess with as many people as one can, each and every day. Nah noo Nah noo! Mike OK PS and may God have mercy on our souls! On 1/1/2021 9:04 AM, Michael Kratky wrote: Happy New Year good riddance to 2020; 1. The dumbest thing I ever bought was a 2020 planner. 2. I was so bored I called Jake from State Farm just to talk to someone. He asked me what I was wearing. 3. 2019: Stay away from negative people. 2020: Stay away from positive people. 4. The world has turned upside down. Old folks are sneaking out of the house & their kids are yelling at them to stay indoors! 5. This morning I saw a neighbor talking to her dog. It was obvious she thought her dog understood her. I came into my house & told my cat. We laughed a lot. 6. Every few days try your jeans on just to make sure they fit. Pajamas will have you believe all is well in the kingdom. 7. Does anyone know if we can take showers yet or should we just keep washing our hands? 8. This virus has done what no woman has been able to do. Cancel sports, shut down all bars & keep men at home! 9. I never thought the comment, “I wouldn’t touch him/her with a 6-foot pole” would become a national policy, but here we are! 10. I need to practice social-distancing from the refrigerator. 11. I hope the weather is good tomorrow for my trip to the Backyard. I’m getting tired of the Living Room. 12. Never in a million years could I have imagined I would go up to a bank teller wearing a mask & ask for money. *From:*legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Richard Ellis *Sent:* Friday, January 01, 2021 5:00 AM *To:* Legacy Ornamental Mills *Subject:* New Year A safe and prosperous 2021 to all the members of this group From Richard in the U K -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/be59d895-676c-46b0-adb6-ce15de6a62a4n%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/be59d895-676c-46b0-adb6-ce15de6a62a4n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/004701d6e04f%245bb2c8d0%2413185a70%24%40com <https://groups.google.com/d/msgid/legacy-ornamental-mills/004701d6e04f%245bb2c8d0%2413185a70%24%40com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/c38b1ec9-1c3a-ae79-399d-99b5d60a45c4%40iglide.net.
RE: Happy New Year good by 2020
Happy New Year good riddance to 2020; 1. The dumbest thing I ever bought was a 2020 planner. 2. I was so bored I called Jake from State Farm just to talk to someone. He asked me what I was wearing. 3. 2019: Stay away from negative people. 2020: Stay away from positive people. 4. The world has turned upside down. Old folks are sneaking out of the house & their kids are yelling at them to stay indoors! 5. This morning I saw a neighbor talking to her dog. It was obvious she thought her dog understood her. I came into my house & told my cat. We laughed a lot. 6. Every few days try your jeans on just to make sure they fit. Pajamas will have you believe all is well in the kingdom. 7. Does anyone know if we can take showers yet or should we just keep washing our hands? 8. This virus has done what no woman has been able to do. Cancel sports, shut down all bars & keep men at home! 9. I never thought the comment, “I wouldn’t touch him/her with a 6-foot pole” would become a national policy, but here we are! 10. I need to practice social-distancing from the refrigerator. 11. I hope the weather is good tomorrow for my trip to the Backyard. I’m getting tired of the Living Room. 12. Never in a million years could I have imagined I would go up to a bank teller wearing a mask & ask for money. From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis Sent: Friday, January 01, 2021 5:00 AM To: Legacy Ornamental Mills Subject: New Year A safe and prosperous 2021 to all the members of this group >From Richard in the U K -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/be59d895-676c-46b0-adb6-ce15de6a62a4n%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/be59d895-676c-46b0-adb6-ce15de6a62a4n%40googlegroups.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/004701d6e04f%245bb2c8d0%2413185a70%24%40com.
Re: New Year
Yes Happy New Year all. Blessings on a new and prosperous 2021 Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Jan 1, 2021 at 5:10 AM Arkady Paka wrote: > Happy New Year to everybody!!! > Arkady from Ukraine. > > пт, 1 янв. 2021 г., 11:59 Richard Ellis : > >> A safe and prosperous 2021 to all the members of this group >> From Richard in the U K >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/be59d895-676c-46b0-adb6-ce15de6a62a4n%40googlegroups.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/be59d895-676c-46b0-adb6-ce15de6a62a4n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CANzkk59U3i%3DHBOxTj62SAgPQR5KrKh9V-EuS7me1Rdmh9tf4gg%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CANzkk59U3i%3DHBOxTj62SAgPQR5KrKh9V-EuS7me1Rdmh9tf4gg%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFT0OWtFmbX%3Dj5i0TpZ1ZH%3DHL2svu1HgtAtbQ0Wx3DQnw%40mail.gmail.com.
Re: New Year
Happy New Year to everybody!!! Arkady from Ukraine. пт, 1 янв. 2021 г., 11:59 Richard Ellis : > A safe and prosperous 2021 to all the members of this group > From Richard in the U K > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/be59d895-676c-46b0-adb6-ce15de6a62a4n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/be59d895-676c-46b0-adb6-ce15de6a62a4n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CANzkk59U3i%3DHBOxTj62SAgPQR5KrKh9V-EuS7me1Rdmh9tf4gg%40mail.gmail.com.
New Year
A safe and prosperous 2021 to all the members of this group >From Richard in the U K -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/be59d895-676c-46b0-adb6-ce15de6a62a4n%40googlegroups.com.
Re: happy new year
Thanks Tim.And when you wake up tomorrow morning - I can guarantee you will have 2020 vision - for at least 365 days.Mac-Original Message- From: Tim Ziegler Sent: Dec 31, 2019 1:53 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: happy new year Thanks a pretty good one Mac. Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Tue, Dec 31, 2019 at 11:28 AM MWF <mwfos...@earthlink.net> wrote:Thank you Bill. Same back to you and yours.This year in particular, your life should finally come into "perfect focus" for you: 20-20!Mac-Original Message- From: bulke...@mmnet.com.au Sent: Dec 31, 2019 8:23 AM To: legacy-ornamental-mills@googlegroups.com Subject: happy new year Happy new year everyone. its just past midnight 1/1/2020 and I have already past my first resolution I’m still breathing, 😉 so all the rest is downhill from here. Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/649056935.3632.1577813280819%40wamui-abby.atl.sa.earthlink.net. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLESOhNm7AQtUrZEPnVE3U%3DP8wZ-1NQDfJwzjy6srR%3D4uQ%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/855294787.4439.1577818954137%40wamui-abby.atl.sa.earthlink.net.
Re: happy new year
Thanks a pretty good one Mac. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Dec 31, 2019 at 11:28 AM MWF wrote: > Thank you Bill. > Same back to you and yours. > > This year in particular, your life should *finally* come into "perfect > focus" for you: *20-20*! > > Mac > -- > -- > > -Original Message- > From: bulke...@mmnet.com.au > Sent: Dec 31, 2019 8:23 AM > To: legacy-ornamental-mills@googlegroups.com > Subject: happy new year > > Happy new year everyone. its just past midnight 1/1/2020 and I have > already past my first resolution I’m still breathing, 😉 so all the rest > is downhill from here. > > > > Bill > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/649056935.3632.1577813280819%40wamui-abby.atl.sa.earthlink.net > <https://groups.google.com/d/msgid/legacy-ornamental-mills/649056935.3632.1577813280819%40wamui-abby.atl.sa.earthlink.net?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLESOhNm7AQtUrZEPnVE3U%3DP8wZ-1NQDfJwzjy6srR%3D4uQ%40mail.gmail.com.
Re: happy new year
Happy New Year from Minnesota in about 11 hours and 11 minutes. It will come in with my eyes closed guaranteed. LOL Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Dec 31, 2019 at 7:23 AM wrote: > Happy new year everyone. its just past midnight 1/1/2020 and I have > already past my first resolution I’m still breathing, 😉 so all the rest > is downhill from here. > > > > Bill > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5bfdd%24794d3bc0%246be7b340%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5bfdd%24794d3bc0%246be7b340%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFFpK%3DPo84Dy%3DR4F8x1aoai-vExerovMY4m2YchnUk84g%40mail.gmail.com.
Re: happy new year
I'm still breathing as well, heavy and winded, it's the final stretch! Glad to hear that there is another year waiting around the corner and the world has not just stopped. Onward and upwards to bigger and better things. Love laughter and good health to all. But the greatest wish for the group is 2020 creativity. On your mark, get set G! Mike OK On 12/31/2019 7:23 AM, bulke...@mmnet.com.au<mailto:bulke...@mmnet.com.au> wrote: Happy new year everyone. its just past midnight 1/1/2020 and I have already past my first resolution I’m still breathing, 😉 so all the rest is downhill from here. Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5bfdd%24794d3bc0%246be7b340%24%40mmnet.com.au<https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5bfdd%24794d3bc0%246be7b340%24%40mmnet.com.au?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/a2a4779b-af11-d060-1091-6112df4dc450%40iglide.net.
Re: happy new year
Thank you Bill. Same back to you and yours.This year in particular, your life should finally come into "perfect focus" for you: 20-20!Mac-Original Message- From: bulke...@mmnet.com.au Sent: Dec 31, 2019 8:23 AM To: legacy-ornamental-mills@googlegroups.com Subject: happy new year Happy new year everyone. its just past midnight 1/1/2020 and I have already past my first resolution I’m still breathing, 😉 so all the rest is downhill from here. Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/649056935.3632.1577813280819%40wamui-abby.atl.sa.earthlink.net.
Re: happy new year
Happy New Year to you and your family Bill, Ron from Texas. On Tue, Dec 31, 2019 at 7:23 AM wrote: > Happy new year everyone. its just past midnight 1/1/2020 and I have > already past my first resolution I’m still breathing, 😉 so all the rest > is downhill from here. > > > > Bill > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5bfdd%24794d3bc0%246be7b340%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5bfdd%24794d3bc0%246be7b340%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAH4Mj5v3MYxhKbhBtJ2nsEfsGf%2BCwGM6_rFvSY_ppvY7HoFQTA%40mail.gmail.com.
Re: happy new year
Hi Bill Curt and averybody!!! Happy New Year to you and your familiers. Arkady From Ukraine. . вт, 31 дек. 2019 г. в 18:12, Arkady Paka : > > > вт, 31 груд. 2019, 16:38 користувач 'Curt George' via Legacy Ornamental > Mills пише: > >> Happy New Year Bill. >> >> I'm still breathing as well. ;-) >> >> 2020 (Wow!) >> >> C.A.G. >> >> On Tuesday, December 31, 2019, 08:23:32 AM EST, >> wrote: >> >> >> Happy new year everyone. its just past midnight 1/1/2020 and I have >> already past my first resolution I’m still breathing, 😉 so all the rest >> is downhill from here. >> >> >> >> Bill >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5bfdd%24794d3bc0%246be7b340%24%40mmnet.com.au >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5bfdd%24794d3bc0%246be7b340%24%40mmnet.com.au?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/1857283108.3390343.1577803131389%40mail.yahoo.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1857283108.3390343.1577803131389%40mail.yahoo.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CANzkk5-b9MMNP1JDUvuqN56jp6yRwmcWR9CrS5GAuryPajBiug%40mail.gmail.com.
Re: happy new year
вт, 31 груд. 2019, 16:38 користувач 'Curt George' via Legacy Ornamental Mills пише: > Happy New Year Bill. > > I'm still breathing as well. ;-) > > 2020 (Wow!) > > C.A.G. > > On Tuesday, December 31, 2019, 08:23:32 AM EST, > wrote: > > > Happy new year everyone. its just past midnight 1/1/2020 and I have > already past my first resolution I’m still breathing, 😉 so all the rest > is downhill from here. > > > > Bill > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5bfdd%24794d3bc0%246be7b340%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5bfdd%24794d3bc0%246be7b340%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1857283108.3390343.1577803131389%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/1857283108.3390343.1577803131389%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CANzkk5_aMbT6%3DZ7t3-7_8PvoE5F2VM5%3Dg3HO2C20n%3D-PgE3rrg%40mail.gmail.com.
Re: happy new year
Happy New Year Bill. I'm still breathing as well. ;-) 2020 (Wow!) C.A.G. On Tuesday, December 31, 2019, 08:23:32 AM EST, wrote: Happy new year everyone. its just past midnight 1/1/2020 and I have already past my first resolution I’m still breathing, 😉 so all the rest is downhill from here. Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5bfdd%24794d3bc0%246be7b340%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1857283108.3390343.1577803131389%40mail.yahoo.com.
happy new year
Happy new year everyone. its just past midnight 1/1/2020 and I have already past my first resolution I’m still breathing, 😉 so all the rest is downhill from here. Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5bfdd%24794d3bc0%246be7b340%24%40mmnet.com.au.
Re: Legacy's turn table (Happy New Year.)
Greetings Arkady, my apologies in the delay in getting back to you on your question. The DC speed controller is a Dayton model #6X165E, the DC gearmotor is a Dayton model #4Z131. On Sunday, January 6, 2019 at 7:34:50 PM UTC-8, Curt George wrote: > > Hello Everyone. Happy New Year to all. > > I received an e-mail asking what I though about the Legacy's turn table. > > The question brings me to think, How many of you own a turn table? Do you > think it was > worth the expensive? > > On a side note.( If you think its a good tool.) Do you think you could > make something the > would work as well? > > Its been a little quite this month,( Granted its only 6 days into it. ) > Lets start this New Year off with a big posting month for our group. > > Lets hear what you think ! > > Have a great day everyone, > > Happy New Year. > > C.A.G. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Legacy's turn table (Happy New Year.)
Hi Rookie. Thanks for pics. Very good modifications. What motor and dayton dc speed control have you used? Arkady from Ukraine. вт, 8 янв. 2019 г. в 20:34, Tim Ziegler : > very nice! Looks very thought out. That certainly opens up a lot of > features and options. > now if I can just find one thats for sale I'll be happy. > > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Tue, Jan 8, 2019 at 12:16 PM rookie wrote: > >> IMHO the rotary table greatly expands the capability of the LOM. Like >> many woodworking machines you just have to tailor it to your needs. I >> recently posted a thread here titled "rotary table modifications", since >> that posting I have put together two rotary table "inserts" so to speak, >> that I am still tweaking but so far are working pretty well. I've enclosed >> a pic, (hope it came across it's been awhile since I've tried this). With >> the changes I can now accurately center the table in seconds, change out >> table inserts without have to remove rotary table, ( I tack-welded threaded >> tees to underside of table), also has a threaded center for holding down >> wood pieces. I use sacrificial wood base pieces that are held fast by the >> wood inserts. >> >> >> https://s1180.photobucket.com/user/sammyparrot/media/DSC_3313_zpsgwvn7kbf.jpg.html >> >> http://s1180.photobucket.com/user/sammyparrot/media/DSC_3311_zpsaxa8djia.jpg.html >> On Sunday, January 6, 2019 at 7:34:50 PM UTC-8, Curt George wrote: >> >>> Hello Everyone. Happy New Year to all. >>> >>> I received an e-mail asking what I though about the Legacy's turn table. >>> >>> The question brings me to think, How many of you own a turn table? Do >>> you think it was >>> worth the expensive? >>> >>> On a side note.( If you think its a good tool.) Do you think you could >>> make something the >>> would work as well? >>> >>> Its been a little quite this month,( Granted its only 6 days into it. ) >>> Lets start this New Year off with a big posting month for our group. >>> >>> Lets hear what you think ! >>> >>> Have a great day everyone, >>> >>> Happy New Year. >>> >>> C.A.G. >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To post to this group, send email to >> legacy-ornamental-mills@googlegroups.com. >> Visit this group at >> https://groups.google.com/group/legacy-ornamental-mills. >> For more options, visit https://groups.google.com/d/optout. >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Legacy's turn table (Happy New Year.)
very nice! Looks very thought out. That certainly opens up a lot of features and options. now if I can just find one thats for sale I'll be happy. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jan 8, 2019 at 12:16 PM rookie wrote: > IMHO the rotary table greatly expands the capability of the LOM. Like > many woodworking machines you just have to tailor it to your needs. I > recently posted a thread here titled "rotary table modifications", since > that posting I have put together two rotary table "inserts" so to speak, > that I am still tweaking but so far are working pretty well. I've enclosed > a pic, (hope it came across it's been awhile since I've tried this). With > the changes I can now accurately center the table in seconds, change out > table inserts without have to remove rotary table, ( I tack-welded threaded > tees to underside of table), also has a threaded center for holding down > wood pieces. I use sacrificial wood base pieces that are held fast by the > wood inserts. > > > https://s1180.photobucket.com/user/sammyparrot/media/DSC_3313_zpsgwvn7kbf.jpg.html > > http://s1180.photobucket.com/user/sammyparrot/media/DSC_3311_zpsaxa8djia.jpg.html > On Sunday, January 6, 2019 at 7:34:50 PM UTC-8, Curt George wrote: > >> Hello Everyone. Happy New Year to all. >> >> I received an e-mail asking what I though about the Legacy's turn table. >> >> The question brings me to think, How many of you own a turn table? Do >> you think it was >> worth the expensive? >> >> On a side note.( If you think its a good tool.) Do you think you could >> make something the >> would work as well? >> >> Its been a little quite this month,( Granted its only 6 days into it. ) >> Lets start this New Year off with a big posting month for our group. >> >> Lets hear what you think ! >> >> Have a great day everyone, >> >> Happy New Year. >> >> C.A.G. >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Legacy's turn table (Happy New Year.)
IMHO the rotary table greatly expands the capability of the LOM. Like many woodworking machines you just have to tailor it to your needs. I recently posted a thread here titled "rotary table modifications", since that posting I have put together two rotary table "inserts" so to speak, that I am still tweaking but so far are working pretty well. I've enclosed a pic, (hope it came across it's been awhile since I've tried this). With the changes I can now accurately center the table in seconds, change out table inserts without have to remove rotary table, ( I tack-welded threaded tees to underside of table), also has a threaded center for holding down wood pieces. I use sacrificial wood base pieces that are held fast by the wood inserts. https://s1180.photobucket.com/user/sammyparrot/media/DSC_3313_zpsgwvn7kbf.jpg.html http://s1180.photobucket.com/user/sammyparrot/media/DSC_3311_zpsaxa8djia.jpg.html On Sunday, January 6, 2019 at 7:34:50 PM UTC-8, Curt George wrote: > Hello Everyone. Happy New Year to all. > > I received an e-mail asking what I though about the Legacy's turn table. > > The question brings me to think, How many of you own a turn table? Do you > think it was > worth the expensive? > > On a side note.( If you think its a good tool.) Do you think you could > make something the > would work as well? > > Its been a little quite this month,( Granted its only 6 days into it. ) > Lets start this New Year off with a big posting month for our group. > > Lets hear what you think ! > > Have a great day everyone, > > Happy New Year. > > C.A.G. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Legacy's turn table (Happy New Year.)
No table, but I have plenty of index plates that I never use anymore because of these methods. Crank handle indexing https://www.youtube.com/watch?v=oHgzEKnON-o Carriage Indexing https://www.youtube.com/watch?v=SjcFpO51upw&t=23s On 1/8/2019 8:04 AM, Tim Ziegler wrote: Does anyone have the Legacy Turn table they would consider selling? Also looking for the different indexing plates etc for the 1200. I have the single set that come with it but would like all the others that were offered on the 1200. thanks, Tim ZWW&S On Sunday, January 6, 2019 at 9:34:50 PM UTC-6, Curt George wrote: Hello Everyone. Happy New Year to all. I received an e-mail asking what I though about the Legacy's turn table. The question brings me to think, How many of you own a turn table? Do you think it was worth the expensive? On a side note.( If you think its a good tool.) Do you think you could make something the would work as well? Its been a little quite this month,( Granted its only 6 days into it. ) Lets start this New Year off with a big posting month for our group. Lets hear what you think ! Have a great day everyone, Happy New Year. C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. To post to this group, send email to legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com>. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Legacy's turn table (Happy New Year.)
Does anyone have the Legacy Turn table they would consider selling? Also looking for the different indexing plates etc for the 1200. I have the single set that come with it but would like all the others that were offered on the 1200. thanks, Tim ZWW&S On Sunday, January 6, 2019 at 9:34:50 PM UTC-6, Curt George wrote: > > Hello Everyone. Happy New Year to all. > > I received an e-mail asking what I though about the Legacy's turn table. > > The question brings me to think, How many of you own a turn table? Do you > think it was > worth the expensive? > > On a side note.( If you think its a good tool.) Do you think you could > make something the > would work as well? > > Its been a little quite this month,( Granted its only 6 days into it. ) > Lets start this New Year off with a big posting month for our group. > > Lets hear what you think ! > > Have a great day everyone, > > Happy New Year. > > C.A.G. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: Legacy's turn table (Happy New Year.)
I have 2 rotary tables one for the revo and one for the 900 both are very good and well worth the cost i feel. But if i didn’t have one I think one could be made by cutting the gears using a gear pattern generator on line and a scroll saw to cut from either aluminium or wood personally i would use aluminium. Bill From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Monday, 7 January 2019 2:35 PM To: Legacy-Ornamental-Mills Subject: Legacy's turn table (Happy New Year.) Hello Everyone. Happy New Year to all. I received an e-mail asking what I though about the Legacy's turn table. The question brings me to think, How many of you own a turn table? Do you think it was worth the expensive? On a side note.( If you think its a good tool.) Do you think you could make something the would work as well? Its been a little quite this month,( Granted its only 6 days into it. ) Lets start this New Year off with a big posting month for our group. Lets hear what you think ! Have a great day everyone, Happy New Year. C.A.G. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Legacy's turn table (Happy New Year.)
Does anyone have a turn table they may be interested in selling? I have a recent purchase on a good used 1200 and looking for both the turn table and extra gears? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Jan 7, 2019 at 8:45 AM 'Frank Vidmar' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Have one haven’t played around with it yet > > Sent from my iPhone > > On Jan 6, 2019, at 10:20 PM, 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > > Cole I haven't heard for you in an Year. ;-) > > I hope all is well ? > > What do you think about making a turn table? Legacy's turn table > shouldn't be to hard to copy, or would you make your's differently ? > Perhaps a worm gear drive? or a chain/belt drive? > Any Ideas? > > C.A.G. > > On Sunday, January 6, 2019, 10:40:02 PM EST, Cole Andrews < > coleandrew...@gmail.com> wrote: > > > Love mine > > On Sunday, January 6, 2019, Tracy Smith wrote: > > I've got one. Excited to try it. I just haven't had the time to play with > it yet. > > Tracy > > On Sun, Jan 6, 2019 at 8:34 PM 'Curt George' via Legacy Ornamental Mills > googlegroups.com > wrote: > > Hello Everyone. Happy New Year to all. > > I received an e-mail asking what I though about the Legacy's turn table. > > The question brings me to think, How many of you own a turn table? Do you > think it was > worth the expensive? > > On a side note.( If you think its a good tool.) Do you think you could > make something the > would work as well? > > Its been a little quite this month,( Granted its only 6 days into it. ) > Lets start this New Year off with a big posting month for our group. > > Lets hear what you think ! > > Have a great day everyone, > > Happy New Year. > > C.A.G. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+ unsubscr...@googlegroups.com > . > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com . > Visit this group at https://groups.google.com/ > group/legacy-ornamental-mills > <https://groups.google.com/group/legacy-ornamental-mills>. > For more options, visit https://groups.google.com/d/ optout > <https://groups.google.com/d/optout>. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+ unsubscr...@googlegroups.com > . > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com . > Visit this group at https://groups.google.com/ > group/legacy-ornamental-mills > <https://groups.google.com/group/legacy-ornamental-mills>. > For more options, visit https://groups.google.com/d/ optout > <https://groups.google.com/d/optout>. > > > > -- > Sent from Gmail Mobile > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/grou
Re: Legacy's turn table (Happy New Year.)
Have one haven’t played around with it yet Sent from my iPhone > On Jan 6, 2019, at 10:20 PM, 'Curt George' via Legacy Ornamental Mills > wrote: > > Cole I haven't heard for you in an Year. ;-) > > I hope all is well ? > > What do you think about making a turn table? Legacy's turn table shouldn't > be to hard to copy, or would you make your's differently ? Perhaps a worm > gear drive? or a chain/belt drive? > Any Ideas? > > C.A.G. > > On Sunday, January 6, 2019, 10:40:02 PM EST, Cole Andrews > wrote: > > > Love mine > > On Sunday, January 6, 2019, Tracy Smith wrote: > I've got one. Excited to try it. I just haven't had the time to play with it > yet. > > Tracy > > On Sun, Jan 6, 2019 at 8:34 PM 'Curt George' via Legacy Ornamental Mills > wrote: > Hello Everyone. Happy New Year to all. > > I received an e-mail asking what I though about the Legacy's turn table. > > The question brings me to think, How many of you own a turn table? Do you > think it was > worth the expensive? > > On a side note.( If you think its a good tool.) Do you think you could make > something the > would work as well? > > Its been a little quite this month,( Granted its only 6 days into it. ) Lets > start this New Year off with a big posting month for our group. > > Lets hear what you think ! > > Have a great day everyone, > > Happy New Year. > > C.A.G. > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+ unsubscr...@googlegroups.com. > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com. > Visit this group at https://groups.google.com/ group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/ optout. > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+ unsubscr...@googlegroups.com. > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com. > Visit this group at https://groups.google.com/ group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/ optout. > > > -- > Sent from Gmail Mobile > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to legacy-ornamental-mills@googlegroups.com. > Visit this group at https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to legacy-ornamental-mills@googlegroups.com. > Visit this group at https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Legacy's turn table (Happy New Year.)
Cole I haven't heard for you in an Year. ;-) I hope all is well ? What do you think about making a turn table? Legacy's turn table shouldn't be to hard to copy, or would you make your's differently ? Perhaps a worm gear drive? or a chain/belt drive?Any Ideas? C.A.G. On Sunday, January 6, 2019, 10:40:02 PM EST, Cole Andrews wrote: Love mine On Sunday, January 6, 2019, Tracy Smith wrote: I've got one. Excited to try it. I just haven't had the time to play with it yet. Tracy On Sun, Jan 6, 2019 at 8:34 PM 'Curt George' via Legacy Ornamental Mills wrote: Hello Everyone. Happy New Year to all. I received an e-mail asking what I though about the Legacy's turn table. The question brings me to think, How many of you own a turn table? Do you think it was worth the expensive? On a side note.( If you think its a good tool.) Do you think you could make something the would work as well? Its been a little quite this month,( Granted its only 6 days into it. ) Lets start this New Year off with a big posting month for our group. Lets hear what you think ! Have a great day everyone, Happy New Year. C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+ unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@ googlegroups.com. Visit this group at https://groups.google.com/ group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/ optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+ unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@ googlegroups.com. Visit this group at https://groups.google.com/ group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/ optout. -- Sent from Gmail Mobile -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Legacy's turn table (Happy New Year.)
Love mine On Sunday, January 6, 2019, Tracy Smith wrote: > I've got one. Excited to try it. I just haven't had the time to play with > it yet. > > Tracy > > On Sun, Jan 6, 2019 at 8:34 PM 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > >> Hello Everyone. Happy New Year to all. >> >> I received an e-mail asking what I though about the Legacy's turn table. >> >> The question brings me to think, How many of you own a turn table? Do >> you think it was >> worth the expensive? >> >> On a side note.( If you think its a good tool.) Do you think you could >> make something the >> would work as well? >> >> Its been a little quite this month,( Granted its only 6 days into it. ) >> Lets start this New Year off with a big posting month for our group. >> >> Lets hear what you think ! >> >> Have a great day everyone, >> >> Happy New Year. >> >> C.A.G. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To post to this group, send email to legacy-ornamental-mills@ >> googlegroups.com. >> Visit this group at https://groups.google.com/ >> group/legacy-ornamental-mills. >> For more options, visit https://groups.google.com/d/optout. >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com. > Visit this group at https://groups.google.com/ > group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- Sent from Gmail Mobile -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Legacy's turn table (Happy New Year.)
I've got one. Excited to try it. I just haven't had the time to play with it yet. Tracy On Sun, Jan 6, 2019 at 8:34 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello Everyone. Happy New Year to all. > > I received an e-mail asking what I though about the Legacy's turn table. > > The question brings me to think, How many of you own a turn table? Do you > think it was > worth the expensive? > > On a side note.( If you think its a good tool.) Do you think you could > make something the > would work as well? > > Its been a little quite this month,( Granted its only 6 days into it. ) > Lets start this New Year off with a big posting month for our group. > > Lets hear what you think ! > > Have a great day everyone, > > Happy New Year. > > C.A.G. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Legacy's turn table (Happy New Year.)
Hello Everyone. Happy New Year to all. I received an e-mail asking what I though about the Legacy's turn table. The question brings me to think, How many of you own a turn table? Do you think it was worth the expensive? On a side note.( If you think its a good tool.) Do you think you could make something the would work as well? Its been a little quite this month,( Granted its only 6 days into it. ) Lets start this New Year off with a big posting month for our group. Lets hear what you think ! Have a great day everyone, Happy New Year. C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: happy new year
Thanks for the honorable mention Bill :>) I'm big on making things multi-taskers. The only significant difference between the 1800 and the 1200 is the 2' in length. I think the shorter version fits in my small shop (720 sq ft) better. I always thought the 900 (at 4') was a great size for the small shop except the smaller max diameter would be missed after using the 1200. Hey Milt, as to using the LOM, I use my LOM for a lot of things (not just spindles). it is great for joinery and flat milling too. I use mine all the time. On Sunday, December 31, 2017 at 9:34:18 PM UTC-6, aussiman wrote: > > Well its 2018 here now and I’m still breathing so it’s already a good year > I don’t have any new year resolutions yet accept perhaps trying to finalise > some transactions that have been hanging around all last year. > > Anyway happy new year to all from down under hope you all have a great year > > > > Bill > > > > > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: happy new year
I like russes sort of idea mount a top on the legacy and use it as your work bench when not being used ,that way its not the legacy that goes but the work bench to get more room in a small shop Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Michael Kratky Sent: Wednesday, 3 January 2018 5:22 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: happy new year Agree, don’t see much of an advantage in the vertical position, space appears to be a major problem with most unless the Legacy is all you own and tinker with, I even lent mine to a regional Woodturners Club who never used it despite me demonstrating making several ornate walking staffs so its back here in storage because my 648 Sq ft shop is simply too small; even thought about a pulley system to raise it 6 ½’ off the floor but you’d need 10’ ceilings for that. Happy sub zero 1st of the of the year, Michael From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Monday, January 01, 2018 7:24 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: happy new year Hello Arkady As I see it space is the only real advantage, a small foot print. The Legacy could be easier to store in most work shops, since it would really take up no more room than a person standing. Now using the Legacy in the vertical position might cause problems with the carriage, and the tail stock lock would have to be stronger, due to weight/ gravity (,if you stand the machine on the tail side of the end). but other then that, I don't think turning in-between centers would be not problem. I hear a lot of people say that they do not have room in there shop for the Legacy. so they store it away, (Out of sight. Out of mind in my book.) If I dont use the tool, then its just a thing to take up needed space. Unless you are like Russ V. and make a work station that can be used in l"ALL" that you do. a machine that is in the way, just in the way. and a pain to work around.thus it is something to be gotten rid of. Perhaps we should look out side the box? (so to speak.) to fix our problems? Or perhaps we just need to start looking at what we see in-sise our/ the box? The Legacy is a great machine, and can do alot, but unless you use it, is just sits in the corner and gathers dust. and take up needed space. that is all that I can say at this min. Have a good night. And again A Happy New Year. C.A.G. and gravity is the only real dis-advantage. On Monday, January 1, 2018 2:10 PM, Arkady Paka wrote: Hello Curt Making the Legacy into a Vertical machine instead of a horizontal one is interesting idea. Which advantages of doing just that are you see? Arkady. 2018-01-01 18:58 GMT+02:00 'Curt George' via Legacy Ornamental Mills : Hello Michael You know its warmer in Alaska at this time then it is in most of the lower 48. today. I am glad to hear your staying worm in your shop. but putting your Legacy into storage? (I would stand my unit on its end and put it into the corner of the shop before I would do that! ;-p ) With all kidding aside, I have been re-thinking this idea again. I am talking about , is making the Legacy into a Vertical machine instead of a horizontal one. There might be some advantages of doing just that. Any thought on this idea??? Open to all takers. (Not just Michael.) What do you all think? More latter. C.A.G. On Monday, January 1, 2018 10:55 AM, Michael Kratky wrote: -22°F here overnight in the Adirondacks but the shop is nice and warm thanks to a new Rinnai LP Gas heater I installed last year. Like every New Years I have a lengthy list of woodworking projects and shows on tap, unfortunately the 1200 LOM is in storage due to space restraints. 2018 is a transition year for us looking to move out of New York State to more tax friendly and temperate region. Happy New Years, Michael K From: legacy-ornamental-mills@ googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> [mailto:legacy-ornamental- <mailto:legacy-ornamental-mills@googlegroups.com> mi...@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Sunday, December 31, 2017 11:18 PM To: legacy-ornamental-mills@ <mailto:legacy-ornamental-mills@googlegroups.com> googlegroups.com Subject: RE: happy new year Send some of that cold my way it’s going to reach 39C here this week thats like 102F too hot for me Bill From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental- <mailto:legacy-ornamental-mills@googlegroups.com> mi...@googlegroups.com] Sent: Monday, 1 January 2018 2:56 PM To: legacy-ornamental-mills@ <mailto:legacy-ornamental-mills@googlegroups.com> googlegroups.com Subject: Re: happy n
RE: happy new year
Agree, don’t see much of an advantage in the vertical position, space appears to be a major problem with most unless the Legacy is all you own and tinker with, I even lent mine to a regional Woodturners Club who never used it despite me demonstrating making several ornate walking staffs so its back here in storage because my 648 Sq ft shop is simply too small; even thought about a pulley system to raise it 6 ½’ off the floor but you’d need 10’ ceilings for that. Happy sub zero 1st of the of the year, Michael From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Monday, January 01, 2018 7:24 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: happy new year Hello Arkady As I see it space is the only real advantage, a small foot print. The Legacy could be easier to store in most work shops, since it would really take up no more room than a person standing. Now using the Legacy in the vertical position might cause problems with the carriage, and the tail stock lock would have to be stronger, due to weight/ gravity (,if you stand the machine on the tail side of the end). but other then that, I don't think turning in-between centers would be not problem. I hear a lot of people say that they do not have room in there shop for the Legacy. so they store it away, (Out of sight. Out of mind in my book.) If I dont use the tool, then its just a thing to take up needed space. Unless you are like Russ V. and make a work station that can be used in l"ALL" that you do. a machine that is in the way, just in the way. and a pain to work around.thus it is something to be gotten rid of. Perhaps we should look out side the box? (so to speak.) to fix our problems? Or perhaps we just need to start looking at what we see in-sise our/ the box? The Legacy is a great machine, and can do alot, but unless you use it, is just sits in the corner and gathers dust. and take up needed space. that is all that I can say at this min. Have a good night. And again A Happy New Year. C.A.G. and gravity is the only real dis-advantage. On Monday, January 1, 2018 2:10 PM, Arkady Paka wrote: Hello Curt Making the Legacy into a Vertical machine instead of a horizontal one is interesting idea. Which advantages of doing just that are you see? Arkady. 2018-01-01 18:58 GMT+02:00 'Curt George' via Legacy Ornamental Mills : Hello Michael You know its warmer in Alaska at this time then it is in most of the lower 48. today. I am glad to hear your staying worm in your shop. but putting your Legacy into storage? (I would stand my unit on its end and put it into the corner of the shop before I would do that! ;-p ) With all kidding aside, I have been re-thinking this idea again. I am talking about , is making the Legacy into a Vertical machine instead of a horizontal one. There might be some advantages of doing just that. Any thought on this idea??? Open to all takers. (Not just Michael.) What do you all think? More latter. C.A.G. On Monday, January 1, 2018 10:55 AM, Michael Kratky wrote: -22°F here overnight in the Adirondacks but the shop is nice and warm thanks to a new Rinnai LP Gas heater I installed last year. Like every New Years I have a lengthy list of woodworking projects and shows on tap, unfortunately the 1200 LOM is in storage due to space restraints. 2018 is a transition year for us looking to move out of New York State to more tax friendly and temperate region. Happy New Years, Michael K From: legacy-ornamental-mills@ googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> [mailto:legacy-ornamental- mi...@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> ] On Behalf Of Bill Bulkeley Sent: Sunday, December 31, 2017 11:18 PM To: legacy-ornamental-mills@ googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: RE: happy new year Send some of that cold my way it’s going to reach 39C here this week thats like 102F too hot for me Bill From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental- mi...@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> ] Sent: Monday, 1 January 2018 2:56 PM To: legacy-ornamental-mills@ googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: Re: happy new year Howdy Bill Still a hours to go. but I think I will survive?>. ;-) But "Man" it is Cold out-side! 8 deg. F. ( -13.3 deg. C.) So you can see, I am staying Home tonight. (STAYING BY THE FIRE Tonight.) ;-) I wish you the Very best in this year adventures. Take care, I will talk to you more Next year. ;-p Have a good night. Bill. C.A.G. On Sunday, December 31, 2017 10:34 PM, Bill Bulkeley wrote: Well its
Re: happy new year
Hello Arkady As I see it space is the only real advantage, a small foot print. The Legacy could be easier to store in most work shops, since it would really take up no more room than a person standing. Now using the Legacy in the vertical position might cause problems with the carriage, and the tail stock lock would have to be stronger, due to weight/ gravity (,if you stand the machine on the tail side of the end). but other then that, I don't think turning in-between centers would be not problem. I hear a lot of people say that they do not have room in there shop for the Legacy. so they store it away, (Out of sight. Out of mind in my book.) If I dont use the tool, then its just a thing to take up needed space.Unless you are like Russ V. and make a work station that can be used in l"ALL" that you do. a machine that is in the way, just in the way. and a pain to work around.thus it is something to be gotten rid of.Perhaps we should look out side the box? (so to speak.) to fix our problems? Or perhaps we just need to start looking at what we see in-sise our/ the box? The Legacy is a great machine, and can do alot, but unless you use it, is just sits in the corner and gathers dust. and take up needed space. that is all that I can say at this min. Have a good night.And again A Happy New Year. C.A.G. and gravity is the only real dis-advantage. On Monday, January 1, 2018 2:10 PM, Arkady Paka wrote: Hello CurtMaking the Legacy into a Vertical machine instead of a horizontal one is interesting idea.Which advantages of doing just that are you see? Arkady. 2018-01-01 18:58 GMT+02:00 'Curt George' via Legacy Ornamental Mills : Hello MichaelYou know its warmer in Alaska at this time then it is in most of the lower 48. today. I am glad to hear your staying worm in your shop. but putting your Legacy into storage? (I would stand my unit on its end and put it into the corner of the shop before I would do that! ;-p ) With all kidding aside, I have been re-thinking this idea again. I am talking about , is making the Legacy into a Vertical machine instead of a horizontal one. There might be some advantages of doing just that.Any thought on this idea???Open to all takers. (Not just Michael.)What do you all think?More latter. C.A.G. On Monday, January 1, 2018 10:55 AM, Michael Kratky wrote: -22°F here overnight in the Adirondacks but the shop is nice and warm thanks to a new Rinnai LP Gas heater I installed last year. Like every New Years I have a lengthy list of woodworking projects and shows on tap, unfortunately the 1200 LOM is in storage due to space restraints. 2018 is a transition year for us looking to move out of New York State to more tax friendly and temperate region. Happy New Years,Michael K From: legacy-ornamental-mills@ googlegroups.com [mailto:legacy-ornamental- mi...@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Sunday, December 31, 2017 11:18 PM To: legacy-ornamental-mills@ googlegroups.com Subject: RE: happy new year Send some of that cold my way it’s going to reach 39C here this week thats like 102F too hot for me Bill From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental- mi...@googlegroups.com] Sent: Monday, 1 January 2018 2:56 PM To: legacy-ornamental-mills@ googlegroups.com Subject: Re: happy new year Howdy Bill Still a hours to go. but I think I will survive?>. ;-)But "Man" it is Cold out-side! 8 deg. F. ( -13.3 deg. C.) So you can see, I am staying Home tonight. (STAYING BY THE FIRE Tonight.) ;-) I wish you the Very best in this year adventures. Take care, I will talk to you more Next year. ;-pHave a good night. Bill. C.A.G. On Sunday, December 31, 2017 10:34 PM, Bill Bulkeley wrote: Well its 2018 here now and I’m still breathing so it’s already a good year I don’t have any new year resolutions yet accept perhaps trying to finalise some transactions that have been hanging around all last year.Anyway happy new year to all from down under hope you all have a great year Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+ unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@ googlegroups.com. Visit this group at https://groups.google.com/ group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/ optout. | | Virus-free. www.avg.com | -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+ unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@ googlegroups.com. Visit th
Re: happy new year
Hello Curt Making the Legacy into a Vertical machine instead of a horizontal one is interesting idea. Which advantages of doing just that are you see? Arkady. 2018-01-01 18:58 GMT+02:00 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com>: > Hello Michael > You know its warmer in Alaska at this time then it is in most of the lower > 48. today. > > I am glad to hear your staying worm in your shop. but putting your Legacy > into storage? (I would stand my unit on its end and put it into the corner > of the shop before I would do that! ;-p ) > > With all kidding aside, I have been re-thinking this idea again. > > I am talking about , is making the Legacy into a Vertical machine instead > of a horizontal one. There might be some advantages of doing just that. > Any thought on this idea??? > Open to all takers. (Not just Michael.) > What do you all think? > More latter. > > C.A.G. > > > On Monday, January 1, 2018 10:55 AM, Michael Kratky < > krat...@roadrunner.com> wrote: > > > -22°F here overnight in the Adirondacks but the shop is nice and warm > thanks to a new Rinnai LP Gas heater I installed last year. Like every New > Years I have a lengthy list of woodworking projects and shows on tap, > unfortunately the 1200 LOM is in storage due to space restraints. 2018 is a > transition year for us looking to move out of New York State to more tax > friendly and temperate region. > > Happy New Years, > Michael K > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Bill Bulkeley > *Sent:* Sunday, December 31, 2017 11:18 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* RE: happy new year > > Send some of that cold my way it’s going to reach 39C here this week > thats like 102F too hot for me > > Bill > > > *From:* 'Curt George' via Legacy Ornamental Mills [ > mailto:legacy-ornamental-mills@googlegroups.com > ] > *Sent:* Monday, 1 January 2018 2:56 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: happy new year > > Howdy Bill > > Still a hours to go. but I think I will survive?>. ;-) > But "Man" it is Cold out-side! 8 deg. F. ( -13.3 deg. C.) So you can > see, I am staying Home tonight. (STAYING BY THE FIRE Tonight.) ;-) > > I wish you the Very best in this year adventures. Take care, I will talk > to you more Next year. ;-p > Have a good night. Bill. > > C.A.G. > > On Sunday, December 31, 2017 10:34 PM, Bill Bulkeley < > bulke...@mmnet.com.au> wrote: > > Well its 2018 here now and I’m still breathing so it’s already a good year > I don’t have any new year resolutions yet accept perhaps trying to finalise > some transactions that have been hanging around all last year. > Anyway happy new year to all from down under hope you all have a great year > > Bill > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com. > Visit this group at https://groups.google.com/ > group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > > > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > Virus-free. www.avg.com > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com. > Visit this group at https://groups.google.com/ > group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com. > Visit this group at https://groups.google.com/ > group/legacy-ornamental-mills. > For more options, visit https://gro
Re: happy new year
Hello MichaelYou know its warmer in Alaska at this time then it is in most of the lower 48. today. I am glad to hear your staying worm in your shop. but putting your Legacy into storage? (I would stand my unit on its end and put it into the corner of the shop before I would do that! ;-p ) With all kidding aside, I have been re-thinking this idea again. I am talking about , is making the Legacy into a Vertical machine instead of a horizontal one. There might be some advantages of doing just that.Any thought on this idea???Open to all takers. (Not just Michael.)What do you all think?More latter. C.A.G. On Monday, January 1, 2018 10:55 AM, Michael Kratky wrote: #yiv2747270474 #yiv2747270474 -- _filtered #yiv2747270474 {font-family:Helvetica;panose-1:2 11 6 4 2 2 2 2 2 4;} _filtered #yiv2747270474 {panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv2747270474 {font-family:Tahoma;panose-1:2 11 6 4 3 5 4 4 2 4;} _filtered #yiv2747270474 {panose-1:3 15 7 2 3 3 2 2 2 4;}#yiv2747270474 #yiv2747270474 p.yiv2747270474MsoNormal, #yiv2747270474 li.yiv2747270474MsoNormal, #yiv2747270474 div.yiv2747270474MsoNormal {margin:0in;margin-bottom:.0001pt;font-size:12.0pt;}#yiv2747270474 a:link, #yiv2747270474 span.yiv2747270474MsoHyperlink {color:blue;text-decoration:underline;}#yiv2747270474 a:visited, #yiv2747270474 span.yiv2747270474MsoHyperlinkFollowed {color:purple;text-decoration:underline;}#yiv2747270474 p {margin-right:0in;margin-left:0in;font-size:12.0pt;}#yiv2747270474 p.yiv2747270474MsoAcetate, #yiv2747270474 li.yiv2747270474MsoAcetate, #yiv2747270474 div.yiv2747270474MsoAcetate {margin:0in;margin-bottom:.0001pt;font-size:8.0pt;}#yiv2747270474 p.yiv2747270474msonormal, #yiv2747270474 li.yiv2747270474msonormal, #yiv2747270474 div.yiv2747270474msonormal {margin-right:0in;margin-left:0in;font-size:12.0pt;}#yiv2747270474 p.yiv2747270474msonormal1, #yiv2747270474 li.yiv2747270474msonormal1, #yiv2747270474 div.yiv2747270474msonormal1 {margin:0in;margin-bottom:.0001pt;font-size:16.0pt;}#yiv2747270474 span.yiv2747270474msohyperlink {}#yiv2747270474 span.yiv2747270474msohyperlinkfollowed {}#yiv2747270474 span.yiv2747270474emailstyle17 {}#yiv2747270474 span.yiv2747270474msohyperlink1 {color:blue;text-decoration:underline;}#yiv2747270474 span.yiv2747270474msohyperlinkfollowed1 {color:purple;text-decoration:underline;}#yiv2747270474 span.yiv2747270474emailstyle171 {color:windowtext;font-weight:normal;font-style:normal;}#yiv2747270474 span.yiv2747270474EmailStyle26 {color:windowtext;font-weight:normal;font-style:normal;}#yiv2747270474 span.yiv2747270474BalloonTextChar {}#yiv2747270474 span.yiv2747270474EmailStyle29 {color:black;font-weight:normal;font-style:normal;}#yiv2747270474 .yiv2747270474MsoChpDefault {font-size:10.0pt;} _filtered #yiv2747270474 {margin:1.0in 1.0in 1.0in 1.0in;}#yiv2747270474 div.yiv2747270474WordSection1 {}#yiv2747270474 -22°F here overnight in the Adirondacks but the shop is nice and warm thanks to a new Rinnai LP Gas heater I installed last year. Like every New Years I have a lengthy list of woodworking projects and shows on tap, unfortunately the 1200 LOM is in storage due to space restraints. 2018 is a transition year for us looking to move out of New York State to more tax friendly and temperate region. Happy New Years,Michael K From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Sunday, December 31, 2017 11:18 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: happy new year Send some of that cold my way it’s going to reach 39C here this week thats like 102F too hot for me Bill From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Monday, 1 January 2018 2:56 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: happy new year Howdy Bill Still a hours to go. but I think I will survive?>. ;-)But "Man" it is Cold out-side! 8 deg. F. ( -13.3 deg. C.) So you can see, I am staying Home tonight. (STAYING BY THE FIRE Tonight.) ;-) I wish you the Very best in this year adventures. Take care, I will talk to you more Next year. ;-pHave a good night. Bill. C.A.G. On Sunday, December 31, 2017 10:34 PM, Bill Bulkeley wrote: Well its 2018 here now and I’m still breathing so it’s already a good year I don’t have any new year resolutions yet accept perhaps trying to finalise some transactions that have been hanging around all last year.Anyway happy new year to all from down under hope you all have a great year Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegrou
RE: happy new year
-22°F here overnight in the Adirondacks but the shop is nice and warm thanks to a new Rinnai LP Gas heater I installed last year. Like every New Years I have a lengthy list of woodworking projects and shows on tap, unfortunately the 1200 LOM is in storage due to space restraints. 2018 is a transition year for us looking to move out of New York State to more tax friendly and temperate region. Happy New Years, Michael K From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Sunday, December 31, 2017 11:18 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: happy new year Send some of that cold my way it’s going to reach 39C here this week thats like 102F too hot for me Bill From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Monday, 1 January 2018 2:56 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: happy new year Howdy Bill Still a hours to go. but I think I will survive?>. ;-) But "Man" it is Cold out-side! 8 deg. F. ( -13.3 deg. C.) So you can see, I am staying Home tonight. (STAYING BY THE FIRE Tonight.) ;-) I wish you the Very best in this year adventures. Take care, I will talk to you more Next year. ;-p Have a good night. Bill. C.A.G. On Sunday, December 31, 2017 10:34 PM, Bill Bulkeley wrote: Well its 2018 here now and I’m still breathing so it’s already a good year I don’t have any new year resolutions yet accept perhaps trying to finalise some transactions that have been hanging around all last year. Anyway happy new year to all from down under hope you all have a great year Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
And a wonderful New Year blessing
I don't know about the majority, but us learners all appreciate the exchange of ideas and project plans of the more advanced group. A lot of hobby folks have mills and I've appreciated pics of their projects too. Keep it up max [No automatic alt text available.] -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: happy new year
Happy New Year again everyone, Arkady that is a very nice wish for all. I thank you. I wish everyone out there the very best for this New Year. Which comes to the Big Question? What dose everyone want form our group this years?We have 433 members of this group, but only a few people post messages to our group. I cant wounder, why? My goal from the very start, has been to get the very most out of our my (Legacy Ornamental Mill.) So along these lines, I like new ideas, techniques, and projects. But those are just my goals, what are yours?It seems to me the most postings that we get are over tools. (E-bay and other sales sites.) If I'm honest with you all, the most postings we got last years are over gripes and problems with Legacy (the company) and its policy's,or mis-understanding of them, but this is a topic that I really do not want to re-hash. So if there are still some people out that who want to complain, I suggest lets make it productive. After all, I think it was Teddy Roosevelt who said a complaint with out a salutation is call'd whining. If you have a problem, let's FIX IT ! is my motto. ;-) So What do you want, from this group? Goals, Hopes and Dreams, all are open... ;-)Have a good day, and again Happy New Year. C.A.G. On Monday, January 1, 2018 4:47 AM, Arkady Paka wrote: Happy New Year to everybody!!!Wish you all a peaceful sky, happiness and health. Arkady. Ukraine. 2018-01-01 6:17 GMT+02:00 Bill Bulkeley : Send some of that cold my way it’s going toreach 39C here this week thats like 102F too hot for me Bill From:'Curt George' via Legacy Ornamental Mills[mailto:legacy-ornamental- mi...@googlegroups.com] Sent: Monday, 1 January 2018 2:56PM To:legacy-ornamental-mills@ googlegroups.com Subject: Re: happy new year Howdy Bill Still a hours to go. but I think I will survive?>. ;-)But "Man" it is Cold out-side! 8 deg. F. ( -13.3deg. C.) So you can see, I am staying Home tonight. (STAYING BY THE FIRETonight.) ;-) I wish you the Very best in this year adventures. Take care,I will talk to you more Next year. ;-pHave a good night. Bill. C.A.G. On Sunday, December 31, 2017 10:34 PM, Bill Bulkeley wrote: Well its 2018 here now and I’m still breathing so it’s already agood year I don’t have any new year resolutions yet accept perhaps trying tofinalise some transactions that have been hanging around all last year.Anyway happy new year to all from down under hope you all have agreat year Bill -- You received this message because you are subscribed to the Google Groups"Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an emailto legacy-ornamental-mills+ unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@ googlegroups.com. Visit this group at https://groups.google.com/ group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/ optout. || Virus-free. www.avg.com | -- You received this message because you are subscribed to the Google Groups"Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an emailto legacy-ornamental-mills+ unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@ googlegroups.com. Visit this group at https://groups.google.com/ group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/ optout.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+ unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@ googlegroups.com. Visit this group at https://groups.google.com/ group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/ optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: happy new year
Happy New Year to everybody!!! Wish you all a peaceful sky, happiness and health. Arkady. Ukraine. 2018-01-01 6:17 GMT+02:00 Bill Bulkeley : > Send some of that cold my way it’s going to reach 39C here this week > thats like 102F too hot for me > > > > Bill > > > > > > *From:* 'Curt George' via Legacy Ornamental Mills [mailto: > legacy-ornamental-mills@googlegroups.com] > *Sent:* Monday, 1 January 2018 2:56 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: happy new year > > > > Howdy Bill > > > > Still a hours to go. but I think I will survive?>. ;-) > > But "Man" it is Cold out-side! 8 deg. F. ( -13.3 deg. C.) So you can > see, I am staying Home tonight. (STAYING BY THE FIRE Tonight.) ;-) > > > > I wish you the Very best in this year adventures. Take care, I will talk > to you more Next year. ;-p > > Have a good night. Bill. > > > > C.A.G. > > > > On Sunday, December 31, 2017 10:34 PM, Bill Bulkeley < > bulke...@mmnet.com.au> wrote: > > > > Well its 2018 here now and I’m still breathing so it’s already a good year > I don’t have any new year resolutions yet accept perhaps trying to finalise > some transactions that have been hanging around all last year. > > Anyway happy new year to all from down under hope you all have a great year > > > > Bill > > > > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com. > Visit this group at https://groups.google.com/ > group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > > > > > > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > > Virus-free. www.avg.com > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com. > Visit this group at https://groups.google.com/ > group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com. > Visit this group at https://groups.google.com/ > group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: happy new year
Send some of that cold my way it’s going to reach 39C here this week thats like 102F too hot for me Bill From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Monday, 1 January 2018 2:56 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: happy new year Howdy Bill Still a hours to go. but I think I will survive?>. ;-) But "Man" it is Cold out-side! 8 deg. F. ( -13.3 deg. C.) So you can see, I am staying Home tonight. (STAYING BY THE FIRE Tonight.) ;-) I wish you the Very best in this year adventures. Take care, I will talk to you more Next year. ;-p Have a good night. Bill. C.A.G. On Sunday, December 31, 2017 10:34 PM, Bill Bulkeley wrote: Well its 2018 here now and I’m still breathing so it’s already a good year I don’t have any new year resolutions yet accept perhaps trying to finalise some transactions that have been hanging around all last year. Anyway happy new year to all from down under hope you all have a great year Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: happy new year
Cold! you call 8 deg F cold! It's -1 def F here and according to the weather service fells like - 20 deg f. I don't know if the F is for Fahrenheit or something else. Also, a piece of trivia, 50 years ago today the Green Bay Packers beat the Dallas Cowboys in the Famous Ice Bowl game. Take care, On Sun, Dec 31, 2017 at 9:56 PM, 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Howdy Bill > > Still a hours to go. but I think I will survive?>. ;-) > But "Man" it is Cold out-side! 8 deg. F. ( -13.3 deg. C.) So you can > see, I am staying Home tonight. (STAYING BY THE FIRE Tonight.) ;-) > > I wish you the Very best in this year adventures. Take care, I will talk > to you more Next year. ;-p > Have a good night. Bill. > > C.A.G. > > > On Sunday, December 31, 2017 10:34 PM, Bill Bulkeley < > bulke...@mmnet.com.au> wrote: > > > Well its 2018 here now and I’m still breathing so it’s already a good year > I don’t have any new year resolutions yet accept perhaps trying to finalise > some transactions that have been hanging around all last year. > Anyway happy new year to all from down under hope you all have a great year > > Bill > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com. > Visit this group at https://groups.google.com/ > group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com. > Visit this group at https://groups.google.com/ > group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: happy new year
Howdy Bill Still a hours to go. but I think I will survive?>. ;-)But "Man" it is Cold out-side! 8 deg. F. ( -13.3 deg. C.) So you can see, I am staying Home tonight. (STAYING BY THE FIRE Tonight.) ;-) I wish you the Very best in this year adventures. Take care, I will talk to you more Next year. ;-pHave a good night. Bill. C.A.G. On Sunday, December 31, 2017 10:34 PM, Bill Bulkeley wrote: Well its2018 here now and I’m still breathing so it’s already a good year Idon’t have any new year resolutions yet accept perhaps trying to finalisesome transactions that have been hanging around all last year. Anywayhappy new year to all from down under hope you all have a great year Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
happy new year
Well its 2018 here now and I'm still breathing so it's already a good year I don't have any new year resolutions yet accept perhaps trying to finalise some transactions that have been hanging around all last year. Anyway happy new year to all from down under hope you all have a great year Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
A Merry Christmas and wishing one and all a Happy, Healthy & Prosperous New Year
Peace and goodwill to all. Regards Roger in UK -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Happy New Year
Happy New year Everyone -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Happy New Year
Tim, next time I use my LOM will be in your Pacific Northwest, my battle cry for this year is "Oregon 2015". (Gotta sell my house here in the Chicago area first) A happy and full year to all of you. Old Irish saying, "May your troubles in the new year last as long as your New Year's resolution". On Wednesday, December 31, 2014 1:26:24 PM UTC-6, Gavin wrote: > The clock is ticking, time is running out.. > You haven't got much chance of finishing all the things you promised you > were going to do at the beginning of 2014. > So shelve them again, grab a glass and I raise a toast to a ~ > > *#*HAPPY *NEW *YEAR#!!* > > Here's to making sawdust in 2015 > > Cheers Lads > > Legacy Widow > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Happy New Year
Happy New Year from the West Coast, Go Ducks!!! -Tim - Original Message - From: CURTIS GEORGE To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, December 31, 2014 2:17 PM Subject: Re: Happy New Year Happy New year Everyone. Its not happened yet. but ... It will in a few hours. (Thanks Bill ) Thank you all for your participation. on this forum. . Hopefully Next year we will be getting back to some interesting conversations,and neat new ways the get things made,with your Legacy Ornamental mill. I am truly looking forward to a exciting 2015. C.A.G. -- From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, December 31, 2014 4:16:55 PM Subject: RE: Happy New Year Happy new year to all from down under its already happened here its new year morning here now My new year’s resolution is a simple one just to wake up every morning breathing that will do me because there is nothing more important everything else is a bonus after that Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Brigitte Graham Sent: Thursday, 1 January 2015 6:26 AM To: legacy-ornamental-mills Subject: Happy New Year The clock is ticking, time is running out.. You haven't got much chance of finishing all the things you promised you were going to do at the beginning of 2014. So shelve them again, grab a glass and I raise a toast to a ~ #*HAPPY *NEW *YEAR#!! Here's to making sawdust in 2015 Cheers Lads Legacy Widow -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5577 / Virus Database: 4257/8843 - Release Date: 12/31/14 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Happy New Year
Happy New year Everyone. Its not happened yet. but ... It will in a few hours. (Thanks Bill ) Thank you all for your participation. on this forum. . Hopefully Next year we will be getting back to some interesting conversations,and neat new ways the get things made,with your Legacy Ornamental mill. I am truly looking forward to a exciting 2015. C.A.G. - Original Message - From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, December 31, 2014 4:16:55 PM Subject: RE: Happy New Year Happy new year to all from down under its already happened here its new year morning here now My new year’s resolution is a simple one just to wake up every morning breathing that will do me because there is nothing more important everything else is a bonus after that Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Brigitte Graham Sent: Thursday, 1 January 2015 6:26 AM To: legacy-ornamental-mills Subject: Happy New Year The clock is ticking, time is running out.. You haven't got much chance of finishing all the things you promised you were going to do at the beginning of 2014. So shelve them again, grab a glass and I raise a toast to a ~ #*H A P P Y * N E W * Y E A R #! ! Here's to making sawdust in 2015 Cheers Lads Legacy Widow -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5577 / Virus Database: 4257/8843 - Release Date: 12/31/14 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: Happy New Year
Happy new year to all from down under its already happened here its new year morning here now My new year’s resolution is a simple one just to wake up every morning breathing that will do me because there is nothing more important everything else is a bonus after that Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Brigitte Graham Sent: Thursday, 1 January 2015 6:26 AM To: legacy-ornamental-mills Subject: Happy New Year The clock is ticking, time is running out.. You haven't got much chance of finishing all the things you promised you were going to do at the beginning of 2014. So shelve them again, grab a glass and I raise a toast to a ~ #*HAPPY *NEW *YEAR#!! Here's to making sawdust in 2015 Cheers Lads Legacy Widow -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5577 / Virus Database: 4257/8843 - Release Date: 12/31/14 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Happy New Year
Yes there are those promises, this year my resolution is going to be forgiveness, starting with me. LOL Merry New Year to one and all. Did I do that wrong? Oh please forgive me. Mike OK On 12/31/2014 1:26 PM, Brigitte Graham wrote: The clock is ticking, time is running out.. You haven't got much chance of finishing all the things you promised you were going to do at the beginning of 2014. So shelve them again, grab a glass and I raise a toast to a ~ /*#*HAPPY *NEW *YEAR#!!*/ Here's to making sawdust in 2015 Cheers Lads Legacy Widow -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. To post to this group, send email to legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com>. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Happy New Year
A very Happy New Year to you Brigitte, Best Wishes, Ron T. On Wed, Dec 31, 2014 at 1:26 PM, Brigitte Graham wrote: > The clock is ticking, time is running out.. > You haven't got much chance of finishing all the things you promised you > were going to do at the beginning of 2014. > So shelve them again, grab a glass and I raise a toast to a ~ > > *#*HAPPY *NEW *YEAR#!!* > > Here's to making sawdust in 2015 > > Cheers Lads > > Legacy Widow > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at http://groups.google.com/group/legacy-ornamental-mills > . > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Happy New Year
The clock is ticking, time is running out.. You haven't got much chance of finishing all the things you promised you were going to do at the beginning of 2014. So shelve them again, grab a glass and I raise a toast to a ~ *#*HAPPY *NEW *YEAR#!!* Here's to making sawdust in 2015 Cheers Lads Legacy Widow -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: Happy New Year evryone!
Thank you for sharing - and yes, the "blessing", if you will, is that you and your family all survived - especially when it seem so close to an "end" for you and your son. I pray that 2014 will be a better year for you as well as for all other members of our "Group".I am sure that there is at least one member, besides me, who appreciates you sharing your home fire story. I will be diligent in ensuring that the screen and glass doors are secured before retiring any night I use the fireplace.Happy New Year to ALL of you!Mac-Original Message- From: Bill Bulkeley Sent: Jan 1, 2014 10:13 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Happy New Year evryone! Yea mac I don’t mind, the fire was caused by a long rolling out of our wood heater and setting my sons mattress on fire, he was camping in the lounge room that night and he didn’t shut the door on the wood heater properly and the log rolled against the door which opened and it fell out showering the floor and his mattress in fire. we came in to his screams of help.I sent the rest of my family out while me and my son tried to fight the blaze but in seconds it was out of control and by minuets the fire was totally all round us and we had no way out .we were on the floor trying to breath and basically saying good bye to each other when an outside wall fell and made a way for us to crawl out. our house was all timber. dam scary, I’m having flash backs while I’m typing this. Anyway in 20 minutes our home was totally gone. 30 minutes after all that the fire fighters arrived our version of 911 is 000 they seemed slow to respond for some reason, one of my children phoned it in when they went out sideanyway enough of that its all past now and we are all safe.And yes it is after the new year here I just plane forgot to post a happy new year lolol yes I’m slack Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of mwfos...@earthlink.netSent: Thursday, 2 January 2014 12:50 PMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: Happy New Year evryone! Bill, A belated Happy New Year to you! With you being "Down Under" I expected to get my first "Happy New Year" from you - since, I believe, you folks are about 15 or 16 hours ahead of us in the United States' Eastern Time Zone. It should be almost halfway through Thursday there now - while it is about 20:45 local for me. Have you found out what caused you house fire? Perhaps, if you don't mind sharing, it may keep one of us from experiencing the same. I looked at the Time Zone map for Australia - Wow, who dreamed that one up?!? Here in the USA, at least the zones have north-south dividing lines. There are a few exceptions. One that comes to mind is one state, Arizona. It seems to have a somewhat crazy time table. At one time Alaska had 4 or 5 time zones - I think they reduced it to 3 now. In any case, we all wish you a Happy, Healthy, and Prosperous New Year. Mac-Original Message- From: Bill Bulkeley Sent: Jan 1, 2014 5:17 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Happy New Year evryone! Happy new year to you both and everybody else on the group. This is the year I can have a house again it’s been such a terrible long wait, being homeless for nearly 2 years is no picnic . my new year’s resolution and for the rest of my life is never to take my home for granted because it can be taken away from you literally over night.In case anyone didn’t know my house burnt to the ground 19 months ago and it has taken till now to get through all the red tape and regulations in my country to be able to start to rebuild.BillPs mike if you hit the mother load my door (when its built lolol) is always open if you visit down under on your trip around the worldBring curt and we can all do legacy down under loloHappy new year all From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of curt georgeSent: Thursday, 2 January 2014 8:19 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Happy New Year evryone! MikeHow about the Michigan PAY Dirt/sand??? Are you saving the best for last? ;-)After two hour of heating the garage is finally up to 60 deg. ( Its 17 deg. outside so its not so bad for an un-insulated building,) So I can start now, playing too. Don't work to hard Mike,Remember its a holiday.send me a few photos of all the gold you found once you are done.. ;-)C.A.G.- Original Message - From: Okla Mike (Liltwisted) To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, January 01, 2014 1:27 PMSubject: Re: Happy New Year evryone! Same to you Curt, I am going to make it a short day in the shop, only 10 hours LOL, Then I am going to play with some gold paydirt I have been wanting to get the gold out of. Some is from New Mexico and the rest is from a mine
RE: Happy New Year evryone!
Yea mac I don't mind, the fire was caused by a long rolling out of our wood heater and setting my sons mattress on fire, he was camping in the lounge room that night and he didn't shut the door on the wood heater properly and the log rolled against the door which opened and it fell out showering the floor and his mattress in fire. we came in to his screams of help. I sent the rest of my family out while me and my son tried to fight the blaze but in seconds it was out of control and by minuets the fire was totally all round us and we had no way out .we were on the floor trying to breath and basically saying good bye to each other when an outside wall fell and made a way for us to crawl out. our house was all timber. dam scary, I'm having flash backs while I'm typing this. Anyway in 20 minutes our home was totally gone. 30 minutes after all that the fire fighters arrived our version of 911 is 000 they seemed slow to respond for some reason, one of my children phoned it in when they went out side anyway enough of that its all past now and we are all safe. And yes it is after the new year here I just plane forgot to post a happy new year lolol yes I'm slack Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of mwfos...@earthlink.net Sent: Thursday, 2 January 2014 12:50 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Happy New Year evryone! Bill, A belated Happy New Year to you! With you being "Down Under" I expected to get my first "Happy New Year" from you - since, I believe, you folks are about 15 or 16 hours ahead of us in the United States' Eastern Time Zone. It should be almost halfway through Thursday there now - while it is about 20:45 local for me. Have you found out what caused you house fire? Perhaps, if you don't mind sharing, it may keep one of us from experiencing the same. I looked at the Time Zone map for Australia - Wow, who dreamed that one up?!? Here in the USA, at least the zones have north-south dividing lines. There are a few exceptions. One that comes to mind is one state, Arizona. It seems to have a somewhat crazy time table. At one time Alaska had 4 or 5 time zones - I think they reduced it to 3 now. In any case, we all wish you a Happy, Healthy, and Prosperous New Year. Mac _ _ -Original Message- From: Bill Bulkeley Sent: Jan 1, 2014 5:17 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Happy New Year evryone! Happy new year to you both and everybody else on the group. This is the year I can have a house again it's been such a terrible long wait, being homeless for nearly 2 years is no picnic . my new year's resolution and for the rest of my life is never to take my home for granted because it can be taken away from you literally over night. In case anyone didn't know my house burnt to the ground 19 months ago and it has taken till now to get through all the red tape and regulations in my country to be able to start to rebuild. Bill Ps mike if you hit the mother load my door (when its built lolol) is always open if you visit down under on your trip around the world Bring curt and we can all do legacy down under lolo Happy new year all From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of curt george Sent: Thursday, 2 January 2014 8:19 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Happy New Year evryone! Mike How about the Michigan PAY Dirt/sand??? Are you saving the best for last? ;-) After two hour of heating the garage is finally up to 60 deg. ( Its 17 deg. outside so its not so bad for an un-insulated building,) So I can start now, playing too. Don't work to hard Mike,Remember its a holiday.send me a few photos of all the gold you found once you are done.. ;-) C.A.G. - Original Message - From: Okla Mike (Liltwisted) <mailto:legacym...@iglide.net> To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, January 01, 2014 1:27 PM Subject: Re: Happy New Year evryone! Same to you Curt, I am going to make it a short day in the shop, only 10 hours LOL, Then I am going to play with some gold paydirt I have been wanting to get the gold out of. Some is from New Mexico and the rest is from a mine in Arizona. Woo Hoo should be a blast. Mike OK On 1/1/2014 12:22 PM, curt george wrote: Happy New year. Hopefully this year will be better than the past ones for all of you. I have to day off so I'm going out to play in the garage today. Take care Everyone, and enjoy the Holladay. C.A.G. _ No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4259 / Virus Database: 3658/6967 - Release Date: 01/01/14 -- You received this messa
RE: Happy New Year evryone!
Bill,A belated Happy New Year to you!With you being "Down Under" I expected to get my first "Happy New Year" from you - since, I believe, you folks are about 15 or 16 hours ahead of us in the United States' Eastern Time Zone. It should be almost halfway through Thursday there now - while it is about 20:45 local for me.Have you found out what caused you house fire? Perhaps, if you don't mind sharing, it may keep one of us from experiencing the same. I looked at the Time Zone map for Australia - Wow, who dreamed that one up?!? Here in the USA, at least the zones have north-south dividing lines. There are a few exceptions. One that comes to mind is one state, Arizona. It seems to have a somewhat crazy time table. At one time Alaska had 4 or 5 time zones - I think they reduced it to 3 now.In any case, we all wish you a Happy, Healthy, and Prosperous New Year.Mac-Original Message- From: Bill Bulkeley Sent: Jan 1, 2014 5:17 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Happy New Year evryone! Happy new year to you both and everybody else on the group. This is the year I can have a house again it’s been such a terrible long wait, being homeless for nearly 2 years is no picnic . my new year’s resolution and for the rest of my life is never to take my home for granted because it can be taken away from you literally over night.In case anyone didn’t know my house burnt to the ground 19 months ago and it has taken till now to get through all the red tape and regulations in my country to be able to start to rebuild.BillPs mike if you hit the mother load my door (when its built lolol) is always open if you visit down under on your trip around the worldBring curt and we can all do legacy down under loloHappy new year all From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of curt georgeSent: Thursday, 2 January 2014 8:19 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Happy New Year evryone! MikeHow about the Michigan PAY Dirt/sand??? Are you saving the best for last? ;-)After two hour of heating the garage is finally up to 60 deg. ( Its 17 deg. outside so its not so bad for an un-insulated building,) So I can start now, playing too. Don't work to hard Mike,Remember its a holiday.send me a few photos of all the gold you found once you are done.. ;-)C.A.G.- Original Message - From: Okla Mike (Liltwisted) To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, January 01, 2014 1:27 PMSubject: Re: Happy New Year evryone! Same to you Curt, I am going to make it a short day in the shop, only 10 hours LOL, Then I am going to play with some gold paydirt I have been wanting to get the gold out of. Some is from New Mexico and the rest is from a mine in Arizona. Woo Hoo should be a blast. MikeOKOn 1/1/2014 12:22 PM, curt george wrote: Happy New year. Hopefully this year will be better than the past ones for all of you.I have to day off so I'm going out to play in the garage today.Take care Everyone, and enjoy the Holladay.C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/groups/opt_out.
RE: Happy New Year evryone!
Happy new year to you both and everybody else on the group. This is the year I can have a house again it's been such a terrible long wait, being homeless for nearly 2 years is no picnic . my new year's resolution and for the rest of my life is never to take my home for granted because it can be taken away from you literally over night. In case anyone didn't know my house burnt to the ground 19 months ago and it has taken till now to get through all the red tape and regulations in my country to be able to start to rebuild. Bill Ps mike if you hit the mother load my door (when its built lolol) is always open if you visit down under on your trip around the world Bring curt and we can all do legacy down under lolo Happy new year all From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of curt george Sent: Thursday, 2 January 2014 8:19 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Happy New Year evryone! Mike How about the Michigan PAY Dirt/sand??? Are you saving the best for last? ;-) After two hour of heating the garage is finally up to 60 deg. ( Its 17 deg. outside so its not so bad for an un-insulated building,) So I can start now, playing too. Don't work to hard Mike,Remember its a holiday.send me a few photos of all the gold you found once you are done.. ;-) C.A.G. - Original Message - From: Okla Mike (Liltwisted) <mailto:legacym...@iglide.net> To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, January 01, 2014 1:27 PM Subject: Re: Happy New Year evryone! Same to you Curt, I am going to make it a short day in the shop, only 10 hours LOL, Then I am going to play with some gold paydirt I have been wanting to get the gold out of. Some is from New Mexico and the rest is from a mine in Arizona. Woo Hoo should be a blast. Mike OK On 1/1/2014 12:22 PM, curt george wrote: Happy New year. Hopefully this year will be better than the past ones for all of you. I have to day off so I'm going out to play in the garage today. Take care Everyone, and enjoy the Holladay. C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/groups/opt_out. _ No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4259 / Virus Database: 3658/6965 - Release Date: 12/31/13 No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4259 / Virus Database: 3658/6965 - Release Date: 12/31/13 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/groups/opt_out.